diff options
40 files changed, 84 insertions, 0 deletions
diff --git a/apps/files_trashbin/l10n/de.js b/apps/files_trashbin/l10n/de.js index c74c14ab3c5..1b21da1fce2 100644 --- a/apps/files_trashbin/l10n/de.js +++ b/apps/files_trashbin/l10n/de.js @@ -3,6 +3,7 @@ OC.L10N.register( { "Deleted files" : "Gelöschte Dateien", "restored" : "Wiederhergestellt", + "Deleted files and folders in the trash bin (may expire during export if you are low on storage space)" : "Gelöschte Dateien und Ordner im Papierkorb (können während des Exports gelöscht werden, wenn der Speicherplatz knapp wird)", "This application enables users to restore files that were deleted from the system." : "Diese App ermöglicht es Benutzern Dateien die vom System gelöscht wurden wiederherzustellen.", "This application enables users to restore files that were deleted from the system. It displays a list of deleted files in the web interface, and has options to restore those deleted files back to the users file directories or remove them permanently from the system. Restoring a file also restores related file versions, if the versions application is enabled. When a file is deleted from a share, it can be restored in the same manner, though it is no longer shared. By default, these files remain in the trash bin for 30 days.\nTo prevent a user from running out of disk space, the Deleted files app will not utilize more than 50% of the currently available free quota for deleted files. If the deleted files exceed this limit, the app deletes the oldest files until it gets below this limit. More information is available in the Deleted Files documentation." : "Diese Anwendung ermöglicht es Benutzern, gelöschte Dateien wieder herzustellen. In der Web-Oberfläche wird eine Liste mit allen gelöschten Dateien angezeigt. Es besteht die Möglichkeit die Datein im Dateiverzeichnisse des Benutzers wieder herzustelle, oder diese endgültig zu löschen. Bei der Wiederherstellung einer Datei werden, sofern die Versions Anwendung aktiviert ist, die dazugehörigen Dateiversionen ebenfalls wieder hergestellt. Falls eine geteilte Datei gelöscht wurde, kann diese ebenfals wieder hergestellt werden, jedoch ist diese danach nicht mehr geteilt. Normalerweise verbleiben gelöschte Dateien für 30 Tage im Papierkorb .\nUm zu verhindern, dass einem Benutzer der Speicherplatz ausgeht, nutzt die Anwendung maximal 50% des verfügbaren freien Kontingents für gelöschte Dateien. Sofern die gelöschten Dateien dieses Limit überschreiten, werden zunächst die ältesten Dateien gelöscht, bis das Limit unterschritten wird. Mehr Informationen sind in der Dokumentation verfügbar.", "Restore" : "Wiederherstellen", diff --git a/apps/files_trashbin/l10n/de.json b/apps/files_trashbin/l10n/de.json index 65a74d78ca7..62c1c338309 100644 --- a/apps/files_trashbin/l10n/de.json +++ b/apps/files_trashbin/l10n/de.json @@ -1,6 +1,7 @@ { "translations": { "Deleted files" : "Gelöschte Dateien", "restored" : "Wiederhergestellt", + "Deleted files and folders in the trash bin (may expire during export if you are low on storage space)" : "Gelöschte Dateien und Ordner im Papierkorb (können während des Exports gelöscht werden, wenn der Speicherplatz knapp wird)", "This application enables users to restore files that were deleted from the system." : "Diese App ermöglicht es Benutzern Dateien die vom System gelöscht wurden wiederherzustellen.", "This application enables users to restore files that were deleted from the system. It displays a list of deleted files in the web interface, and has options to restore those deleted files back to the users file directories or remove them permanently from the system. Restoring a file also restores related file versions, if the versions application is enabled. When a file is deleted from a share, it can be restored in the same manner, though it is no longer shared. By default, these files remain in the trash bin for 30 days.\nTo prevent a user from running out of disk space, the Deleted files app will not utilize more than 50% of the currently available free quota for deleted files. If the deleted files exceed this limit, the app deletes the oldest files until it gets below this limit. More information is available in the Deleted Files documentation." : "Diese Anwendung ermöglicht es Benutzern, gelöschte Dateien wieder herzustellen. In der Web-Oberfläche wird eine Liste mit allen gelöschten Dateien angezeigt. Es besteht die Möglichkeit die Datein im Dateiverzeichnisse des Benutzers wieder herzustelle, oder diese endgültig zu löschen. Bei der Wiederherstellung einer Datei werden, sofern die Versions Anwendung aktiviert ist, die dazugehörigen Dateiversionen ebenfalls wieder hergestellt. Falls eine geteilte Datei gelöscht wurde, kann diese ebenfals wieder hergestellt werden, jedoch ist diese danach nicht mehr geteilt. Normalerweise verbleiben gelöschte Dateien für 30 Tage im Papierkorb .\nUm zu verhindern, dass einem Benutzer der Speicherplatz ausgeht, nutzt die Anwendung maximal 50% des verfügbaren freien Kontingents für gelöschte Dateien. Sofern die gelöschten Dateien dieses Limit überschreiten, werden zunächst die ältesten Dateien gelöscht, bis das Limit unterschritten wird. Mehr Informationen sind in der Dokumentation verfügbar.", "Restore" : "Wiederherstellen", diff --git a/apps/files_trashbin/l10n/es.js b/apps/files_trashbin/l10n/es.js index 15290761620..07a49ccc6ef 100644 --- a/apps/files_trashbin/l10n/es.js +++ b/apps/files_trashbin/l10n/es.js @@ -3,6 +3,7 @@ OC.L10N.register( { "Deleted files" : "Archivos eliminados", "restored" : "recuperado", + "Deleted files and folders in the trash bin (may expire during export if you are low on storage space)" : "Archivos y carpetas eliminados en la papelera (pueden caducar durante la exportación si tienes poco espacio de almacenamiento disponible)", "This application enables users to restore files that were deleted from the system." : "Esta app permite a los usuarios recuperar archivos borrados del sistema.", "This application enables users to restore files that were deleted from the system. It displays a list of deleted files in the web interface, and has options to restore those deleted files back to the users file directories or remove them permanently from the system. Restoring a file also restores related file versions, if the versions application is enabled. When a file is deleted from a share, it can be restored in the same manner, though it is no longer shared. By default, these files remain in the trash bin for 30 days.\nTo prevent a user from running out of disk space, the Deleted files app will not utilize more than 50% of the currently available free quota for deleted files. If the deleted files exceed this limit, the app deletes the oldest files until it gets below this limit. More information is available in the Deleted Files documentation." : "Esta aplicación permite a los usuarios recuperar archivos borrados del sistema. Muestra una lista de los archivos borrados en la interfaz web y tiene opciones para restaurar esos archivos borrados a los directorios del usuario o eliminarlos permanentemente del sistema. Restaurar un archivo también restaura las versiones del archivo relacionadas. Cuando un archivo se borra de una compartición, no se puede restaurar de la misma forma, pues ya no será compartido. Por defecto, estos archivos permanecen en la papelera de reciclaje durante 30 días.\nPara evitar que un usuario se quede sin espacio de disco, la app no utilizará más del 50% del espacio disponible a cada momento. Si los archivos borrados exceden este límite, la app borra los archivos más antiguos hasta volver a estar por debajo del límite. Más información disponible en la documentación de Archivos Eliminados.", "Restore" : "Recuperar", diff --git a/apps/files_trashbin/l10n/es.json b/apps/files_trashbin/l10n/es.json index 3221a8b9427..9e4d286dd91 100644 --- a/apps/files_trashbin/l10n/es.json +++ b/apps/files_trashbin/l10n/es.json @@ -1,6 +1,7 @@ { "translations": { "Deleted files" : "Archivos eliminados", "restored" : "recuperado", + "Deleted files and folders in the trash bin (may expire during export if you are low on storage space)" : "Archivos y carpetas eliminados en la papelera (pueden caducar durante la exportación si tienes poco espacio de almacenamiento disponible)", "This application enables users to restore files that were deleted from the system." : "Esta app permite a los usuarios recuperar archivos borrados del sistema.", "This application enables users to restore files that were deleted from the system. It displays a list of deleted files in the web interface, and has options to restore those deleted files back to the users file directories or remove them permanently from the system. Restoring a file also restores related file versions, if the versions application is enabled. When a file is deleted from a share, it can be restored in the same manner, though it is no longer shared. By default, these files remain in the trash bin for 30 days.\nTo prevent a user from running out of disk space, the Deleted files app will not utilize more than 50% of the currently available free quota for deleted files. If the deleted files exceed this limit, the app deletes the oldest files until it gets below this limit. More information is available in the Deleted Files documentation." : "Esta aplicación permite a los usuarios recuperar archivos borrados del sistema. Muestra una lista de los archivos borrados en la interfaz web y tiene opciones para restaurar esos archivos borrados a los directorios del usuario o eliminarlos permanentemente del sistema. Restaurar un archivo también restaura las versiones del archivo relacionadas. Cuando un archivo se borra de una compartición, no se puede restaurar de la misma forma, pues ya no será compartido. Por defecto, estos archivos permanecen en la papelera de reciclaje durante 30 días.\nPara evitar que un usuario se quede sin espacio de disco, la app no utilizará más del 50% del espacio disponible a cada momento. Si los archivos borrados exceden este límite, la app borra los archivos más antiguos hasta volver a estar por debajo del límite. Más información disponible en la documentación de Archivos Eliminados.", "Restore" : "Recuperar", diff --git a/apps/settings/l10n/cs.js b/apps/settings/l10n/cs.js index af2d251bc66..06563a211b2 100644 --- a/apps/settings/l10n/cs.js +++ b/apps/settings/l10n/cs.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "Šifrování na straně serveru", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Šifrování na straně serveru umožňuje zašifrovat soubory, které jsou na tento server nahrávány. To přináší omezení jako třeba snížení výkonu, takže toto zapněte jen pokud je opravdu potřeba.", "Enable server-side encryption" : "Šifrovat na straně serveru", + "Please read carefully before activating server-side encryption:" : "Důkladně si pročtěte a až teprve poté případně zapínejte šifrování dat na straně serveru:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Poté co je zapnuto šifrování, jsou od toho bodu všechny nahrávané soubory šifrovány serverem. Vypnout šifrování bude možné pouze později, až bude šifrovací modul tuto možnost podporovat a po splnění všech nutných podmínek (tzn. nastavení klíčů pro obnovení).", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Šifrování samotné ještě nezaručuje bezpečnost systému. Pokud se chcete dozvědět víc o tom, jak aplikace pro šifrování funguje a jaké jsou podporované případy použití, naleznete to v dokumentaci.", "Be aware that encryption always increases the file size." : "Mějte na paměti, že šifrování vždy navýší velikost souboru.", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "Toto je poslední varování: Opravdu chcete zapnout šifrování?", "No encryption module loaded, please enable an encryption module in the app menu." : "Nenačten žádný šifrovací modul – zapněte ho v nabídce aplikace.", "Select default encryption module:" : "Vyberte výchozí šifrovací modul:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Je třeba přenést své šifrovací klíče ze staré verze šifrování (ownCloud <= 8.0) na novou. Zapněte „Výchozí modul šifrování“ a spusťte příkaz {command}", + "Unable to update server side encryption config" : "Nedaří se zaktualizovat nastavení šifrování na straně serveru", "Rename group" : "Přejmenovat skupinu", "Remove group" : "Odebrat skupinu", "You are about to remove the group {group}. The users will NOT be deleted." : "Chystáte se smazat skupinu {group}. Uživatelé NEbudou smazáni.", diff --git a/apps/settings/l10n/cs.json b/apps/settings/l10n/cs.json index a380fef5c6e..4e3669741bd 100644 --- a/apps/settings/l10n/cs.json +++ b/apps/settings/l10n/cs.json @@ -249,6 +249,7 @@ "Server-side encryption" : "Šifrování na straně serveru", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Šifrování na straně serveru umožňuje zašifrovat soubory, které jsou na tento server nahrávány. To přináší omezení jako třeba snížení výkonu, takže toto zapněte jen pokud je opravdu potřeba.", "Enable server-side encryption" : "Šifrovat na straně serveru", + "Please read carefully before activating server-side encryption:" : "Důkladně si pročtěte a až teprve poté případně zapínejte šifrování dat na straně serveru:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Poté co je zapnuto šifrování, jsou od toho bodu všechny nahrávané soubory šifrovány serverem. Vypnout šifrování bude možné pouze později, až bude šifrovací modul tuto možnost podporovat a po splnění všech nutných podmínek (tzn. nastavení klíčů pro obnovení).", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Šifrování samotné ještě nezaručuje bezpečnost systému. Pokud se chcete dozvědět víc o tom, jak aplikace pro šifrování funguje a jaké jsou podporované případy použití, naleznete to v dokumentaci.", "Be aware that encryption always increases the file size." : "Mějte na paměti, že šifrování vždy navýší velikost souboru.", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "Toto je poslední varování: Opravdu chcete zapnout šifrování?", "No encryption module loaded, please enable an encryption module in the app menu." : "Nenačten žádný šifrovací modul – zapněte ho v nabídce aplikace.", "Select default encryption module:" : "Vyberte výchozí šifrovací modul:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Je třeba přenést své šifrovací klíče ze staré verze šifrování (ownCloud <= 8.0) na novou. Zapněte „Výchozí modul šifrování“ a spusťte příkaz {command}", + "Unable to update server side encryption config" : "Nedaří se zaktualizovat nastavení šifrování na straně serveru", "Rename group" : "Přejmenovat skupinu", "Remove group" : "Odebrat skupinu", "You are about to remove the group {group}. The users will NOT be deleted." : "Chystáte se smazat skupinu {group}. Uživatelé NEbudou smazáni.", diff --git a/apps/settings/l10n/de.js b/apps/settings/l10n/de.js index f25d1324e20..8b54208c2aa 100644 --- a/apps/settings/l10n/de.js +++ b/apps/settings/l10n/de.js @@ -71,6 +71,7 @@ OC.L10N.register( "The PHP OPcache module is not loaded. For better performance it is recommended to load it into your PHP installation." : "Das PHP-OPcache-Modul ist nicht geladen. Für eine bessere Leistung empfiehlt es sich, das Modul in Deiner PHP-Installation zu laden.", "OPcache is disabled. For better performance, it is recommended to apply <code>opcache.enable=1</code> to your PHP configuration." : "OPcache ist deaktiviert. Für eine bessere Leistung wird empfohlen, <code>opcache.enable=1</code> in Deiner PHP-Konfiguration anzuwenden.", "OPcache is configured to remove code comments. With OPcache enabled, <code>opcache.save_comments=1</code> must be set for Nextcloud to function." : "OPcache ist so konfiguriert, dass Codekommentare entfernt werden. Wenn OPcache aktiviert ist, muss <code>opcache.save_comments=1</code> gesetzt werden, damit Nextcloud funktioniert.", + "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be kept in the cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast erreicht. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden.", "The OPcache buffer is nearly full. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.memory_consumption</code> to your PHP configuration with a value higher than <code>%s</code>." : "Der OPcache-Puffer ist fast voll. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.memory_consumption</code> in Deiner PHP-Konfiguration mit einem höheren Wert als <code>%s</code> anzuwenden.", "The OPcache interned strings buffer is nearly full. To assure that repeating strings can be effectively cached, it is recommended to apply <code>opcache.interned_strings_buffer</code> to your PHP configuration with a value higher than <code>%s</code>." : "Der OPcache-Zwischenspeicher für interne Zeichenfolgen ist fast voll. Um sicherzustellen, dass sich wiederholende Zeichenfolgen effektiv zwischengespeichert werden können, wird empfohlen, <code>opcache.interned_strings_buffer</code> mit einem Wert größer als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden.", "Invalid SMTP password." : "Ungültiges SMTP-Passwort", @@ -227,6 +228,7 @@ OC.L10N.register( "Could not copy app password. Please copy it manually." : "Das Passwort für die App konnte nicht kopiert werden. Bitte kopiere es manuell.", "Last job execution ran {time}. Something seems wrong." : "Die letzte Aufgaben-Ausführung lief {time}. Etwas scheint falsch zu sein.", "Last job ran {relativeTime}." : "Die letzte Aufgabe lief {relativeTime}.", + "Background job did not run yet!" : "Hintergrund-Job wurde bislang nicht ausgeführt!", "AJAX" : "AJAX", "Execute one task with each page loaded. Use case: Single user instance." : "Mit jeder geladenen Seite wird eine Aufgabe ausgeführt. Anwendungsfall: Einzelbenutzer-Installation.", "Webcron" : "Webcron", @@ -235,6 +237,7 @@ OC.L10N.register( "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix Erweiterung benötigt. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}. ", "Use system cron service to call the cron.php file every 5 minutes. Recommended for all instances." : "Verwende den System-Cron-Dienst, um die Datei cron.php alle 5 Minuten aufzurufen. Empfohlen für alle Installationen.", "The cron.php needs to be executed by the system user \"{user}\"." : "Die cron.php muss durch den Systembenutzer \"{user}\" ausgeführt werden.", + "Unable to update background job mode" : "Hintergrund-Job-Modus kann nicht aktualisiert werden", "Profile" : "Profil", "Enable or disable profile by default for new users." : "Profil für neue Benutzer standardmäßig aktivieren oder deaktivieren", "Enable" : "Aktivieren", @@ -242,6 +245,7 @@ OC.L10N.register( "Server-side encryption" : "Serverseitige Verschlüsselung", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Serverseitige Verschlüsselung ermöglicht es, die auf diesen Server hochgeladenen Dateien zu verschlüsseln. Dies führt allerdings auch zu Nachteilen, wie z. B. einem Geschwindigkeitsverlust. Sie sollte deshalb nur eingeschaltet werden, wenn sie wirklich benötigt wird.", "Enable server-side encryption" : "Serverseitige Verschlüsselung aktivieren", + "Please read carefully before activating server-side encryption:" : "Bitte lese sorgfältig vor Aktivierung der serverseitigen Verschlüsselung:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Wird die Verschlüsselung einmal aktiviert, so werden alle ab diesem Zeitpunkt hochgeladene Dateien verschlüsselt. Sie kann nur wieder deaktiviert werden, wenn das Verschlüsselungsmodul dies unterstützt und alle Voraussetzungen (wie das Setzen eines Wiederherstellungsschlüssels) im Vorhinein erfüllt wurden.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Verschlüsselung alleine garantiert nicht die Systemsicherheit. Bitte lese in der Dokumentation nach, wie die Verschlüsselungs-app funktioniert und welche Anwendungsfälle unterstützt werden.", "Be aware that encryption always increases the file size." : "Bedenke, dass durch die Verschlüsselung die Dateigröße zunimmt. ", @@ -249,6 +253,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "Dies ist die letzte Warnung: Möchtest Du die Verschlüsselung wirklich aktivieren?", "No encryption module loaded, please enable an encryption module in the app menu." : "Es wurde kein Verschlüsselungs-Modul geladen, bitte ein Verschlüsselungs-Modul im Anwendungs-Menü aktivieren.", "Select default encryption module:" : "Standard-Verschlüsselungs-Modul auswählen:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Du musst Deine Verschlüsselungsschlüssel von der alten Verschlüsselung (ownCloud <= 8.0) auf die neue migrieren. Bitte aktiviere das \"Standardverschlüsselungsmodul\" und führe {command} aus.", + "Unable to update server side encryption config" : "Die Serverseitige Verschlüsselungskonfiguration kann nicht aktualisiert werden.", "Rename group" : "Gruppe umbenennen", "Remove group" : "Gruppe entfernen", "You are about to remove the group {group}. The users will NOT be deleted." : "Du bist dabei die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.", @@ -290,6 +296,7 @@ OC.L10N.register( "Unable to update visibility of {displayId}" : "Sichtbarkeit von {displayId} kann nicht aktualisiert werden", "Your role" : "Deine Funktion", "Unable to update role" : "Rolle konnte nicht aktualisiert werden", + "Change scope level of {accountProperty}, current scope is {scope}" : "Ändern des Geltungsbereich von {accountProperty}, aktueller Bereich ist {scope}", "Unable to update federation scope of the primary {accountProperty}" : "Der Federation-Bereich des primären {accountProperty} konnte nicht aktualisiert werden", "Unable to update federation scope of additional {accountProperty}" : "Der Federation-Bereich des zusätzlichen {accountProperty} konnte nicht aktualisiert werden", "Add additional email" : "Zusätzliche E-Mail-Adresse hinzufügen", diff --git a/apps/settings/l10n/de.json b/apps/settings/l10n/de.json index f390e4b7109..85defba3603 100644 --- a/apps/settings/l10n/de.json +++ b/apps/settings/l10n/de.json @@ -69,6 +69,7 @@ "The PHP OPcache module is not loaded. For better performance it is recommended to load it into your PHP installation." : "Das PHP-OPcache-Modul ist nicht geladen. Für eine bessere Leistung empfiehlt es sich, das Modul in Deiner PHP-Installation zu laden.", "OPcache is disabled. For better performance, it is recommended to apply <code>opcache.enable=1</code> to your PHP configuration." : "OPcache ist deaktiviert. Für eine bessere Leistung wird empfohlen, <code>opcache.enable=1</code> in Deiner PHP-Konfiguration anzuwenden.", "OPcache is configured to remove code comments. With OPcache enabled, <code>opcache.save_comments=1</code> must be set for Nextcloud to function." : "OPcache ist so konfiguriert, dass Codekommentare entfernt werden. Wenn OPcache aktiviert ist, muss <code>opcache.save_comments=1</code> gesetzt werden, damit Nextcloud funktioniert.", + "The maximum number of OPcache keys is nearly exceeded. To assure that all scripts can be kept in the cache, it is recommended to apply <code>opcache.max_accelerated_files</code> to your PHP configuration with a value higher than <code>%s</code>." : "Die maximale Anzahl von OPcache-Schlüsseln ist fast erreicht. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.max_accelerated_files</code> mit einem höheren Wert als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden.", "The OPcache buffer is nearly full. To assure that all scripts can be hold in cache, it is recommended to apply <code>opcache.memory_consumption</code> to your PHP configuration with a value higher than <code>%s</code>." : "Der OPcache-Puffer ist fast voll. Um sicherzustellen, dass alle Skripte im Cache gehalten werden können, wird empfohlen, <code>opcache.memory_consumption</code> in Deiner PHP-Konfiguration mit einem höheren Wert als <code>%s</code> anzuwenden.", "The OPcache interned strings buffer is nearly full. To assure that repeating strings can be effectively cached, it is recommended to apply <code>opcache.interned_strings_buffer</code> to your PHP configuration with a value higher than <code>%s</code>." : "Der OPcache-Zwischenspeicher für interne Zeichenfolgen ist fast voll. Um sicherzustellen, dass sich wiederholende Zeichenfolgen effektiv zwischengespeichert werden können, wird empfohlen, <code>opcache.interned_strings_buffer</code> mit einem Wert größer als <code>%s</code> in Deiner PHP-Konfiguration anzuwenden.", "Invalid SMTP password." : "Ungültiges SMTP-Passwort", @@ -225,6 +226,7 @@ "Could not copy app password. Please copy it manually." : "Das Passwort für die App konnte nicht kopiert werden. Bitte kopiere es manuell.", "Last job execution ran {time}. Something seems wrong." : "Die letzte Aufgaben-Ausführung lief {time}. Etwas scheint falsch zu sein.", "Last job ran {relativeTime}." : "Die letzte Aufgabe lief {relativeTime}.", + "Background job did not run yet!" : "Hintergrund-Job wurde bislang nicht ausgeführt!", "AJAX" : "AJAX", "Execute one task with each page loaded. Use case: Single user instance." : "Mit jeder geladenen Seite wird eine Aufgabe ausgeführt. Anwendungsfall: Einzelbenutzer-Installation.", "Webcron" : "Webcron", @@ -233,6 +235,7 @@ "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix Erweiterung benötigt. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}. ", "Use system cron service to call the cron.php file every 5 minutes. Recommended for all instances." : "Verwende den System-Cron-Dienst, um die Datei cron.php alle 5 Minuten aufzurufen. Empfohlen für alle Installationen.", "The cron.php needs to be executed by the system user \"{user}\"." : "Die cron.php muss durch den Systembenutzer \"{user}\" ausgeführt werden.", + "Unable to update background job mode" : "Hintergrund-Job-Modus kann nicht aktualisiert werden", "Profile" : "Profil", "Enable or disable profile by default for new users." : "Profil für neue Benutzer standardmäßig aktivieren oder deaktivieren", "Enable" : "Aktivieren", @@ -240,6 +243,7 @@ "Server-side encryption" : "Serverseitige Verschlüsselung", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Serverseitige Verschlüsselung ermöglicht es, die auf diesen Server hochgeladenen Dateien zu verschlüsseln. Dies führt allerdings auch zu Nachteilen, wie z. B. einem Geschwindigkeitsverlust. Sie sollte deshalb nur eingeschaltet werden, wenn sie wirklich benötigt wird.", "Enable server-side encryption" : "Serverseitige Verschlüsselung aktivieren", + "Please read carefully before activating server-side encryption:" : "Bitte lese sorgfältig vor Aktivierung der serverseitigen Verschlüsselung:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Wird die Verschlüsselung einmal aktiviert, so werden alle ab diesem Zeitpunkt hochgeladene Dateien verschlüsselt. Sie kann nur wieder deaktiviert werden, wenn das Verschlüsselungsmodul dies unterstützt und alle Voraussetzungen (wie das Setzen eines Wiederherstellungsschlüssels) im Vorhinein erfüllt wurden.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Verschlüsselung alleine garantiert nicht die Systemsicherheit. Bitte lese in der Dokumentation nach, wie die Verschlüsselungs-app funktioniert und welche Anwendungsfälle unterstützt werden.", "Be aware that encryption always increases the file size." : "Bedenke, dass durch die Verschlüsselung die Dateigröße zunimmt. ", @@ -247,6 +251,8 @@ "This is the final warning: Do you really want to enable encryption?" : "Dies ist die letzte Warnung: Möchtest Du die Verschlüsselung wirklich aktivieren?", "No encryption module loaded, please enable an encryption module in the app menu." : "Es wurde kein Verschlüsselungs-Modul geladen, bitte ein Verschlüsselungs-Modul im Anwendungs-Menü aktivieren.", "Select default encryption module:" : "Standard-Verschlüsselungs-Modul auswählen:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Du musst Deine Verschlüsselungsschlüssel von der alten Verschlüsselung (ownCloud <= 8.0) auf die neue migrieren. Bitte aktiviere das \"Standardverschlüsselungsmodul\" und führe {command} aus.", + "Unable to update server side encryption config" : "Die Serverseitige Verschlüsselungskonfiguration kann nicht aktualisiert werden.", "Rename group" : "Gruppe umbenennen", "Remove group" : "Gruppe entfernen", "You are about to remove the group {group}. The users will NOT be deleted." : "Du bist dabei die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.", @@ -288,6 +294,7 @@ "Unable to update visibility of {displayId}" : "Sichtbarkeit von {displayId} kann nicht aktualisiert werden", "Your role" : "Deine Funktion", "Unable to update role" : "Rolle konnte nicht aktualisiert werden", + "Change scope level of {accountProperty}, current scope is {scope}" : "Ändern des Geltungsbereich von {accountProperty}, aktueller Bereich ist {scope}", "Unable to update federation scope of the primary {accountProperty}" : "Der Federation-Bereich des primären {accountProperty} konnte nicht aktualisiert werden", "Unable to update federation scope of additional {accountProperty}" : "Der Federation-Bereich des zusätzlichen {accountProperty} konnte nicht aktualisiert werden", "Add additional email" : "Zusätzliche E-Mail-Adresse hinzufügen", diff --git a/apps/settings/l10n/de_DE.js b/apps/settings/l10n/de_DE.js index 8724d740ac6..8e04744ac63 100644 --- a/apps/settings/l10n/de_DE.js +++ b/apps/settings/l10n/de_DE.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "Serverseitige Verschlüsselung", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Serverseitige Verschlüsselung ermöglicht es die auf diesen Server hochgeladenen Dateien zu verschlüsseln. Dies führt allerdings auch zu Nachteilen, wie z.B. einem Geschwindigkeitsverlust. Sie sollte deshalb nur eingeschaltet werden, wenn sie wirklich benötigt wird.", "Enable server-side encryption" : "Serverseitige Verschlüsselung aktivieren", + "Please read carefully before activating server-side encryption:" : "Bitte vor Aktivierung der serverseitigen Verschlüsselung sorgfältig lesen:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Wird die Verschlüsselung einmal aktiviert, so werden alle ab diesem Zeitpunkt hochgeladene Dateien verschlüsselt. Sie kann nur wieder deaktiviert werden, wenn das Verschlüsselungsmodul dies unterstützt und alle Voraussetzungen (wie das Setzen eines Wiederherstellungsschlüssels) im Vorhinein erfüllt wurden.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Verschlüsselung alleine garantiert nicht die Systemsicherheit. Bitte lese in der Dokumentation nach, wie die Verschlüsselungs-app funktioniert und welche Anwendungsfälle unterstützt werden.", "Be aware that encryption always increases the file size." : "Bedenken Sie, dass durch die Verschlüsselung die Dateigröße zunimmt. ", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "Dies ist die letzte Warnung: Möchten Sie die Verschlüsselung wirklich aktivieren?", "No encryption module loaded, please enable an encryption module in the app menu." : "Es wurde kein Verschlüsselungs-Modul geladen, bitte ein Verschlüsselungs-Modul im Anwendungs-Menü aktivieren.", "Select default encryption module:" : "Standard-Verschlüsselungs-Modul auswählen:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Sie müssen Ihre Verschlüsselungsschlüssel von der alten Verschlüsselung (ownCloud <= 8.0) auf die neue migrieren. Bitte aktivieren Sie das \"Standardverschlüsselungsmodul\" und führen Sie {command} aus", + "Unable to update server side encryption config" : "Serverseitige Verschlüsselungskonfiguration kann nicht aktualisiert werden", "Rename group" : "Gruppe umbenennen", "Remove group" : "Gruppe entfernen", "You are about to remove the group {group}. The users will NOT be deleted." : "Sie sind im Begriff, die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.", diff --git a/apps/settings/l10n/de_DE.json b/apps/settings/l10n/de_DE.json index 119fb44e487..206fee80256 100644 --- a/apps/settings/l10n/de_DE.json +++ b/apps/settings/l10n/de_DE.json @@ -249,6 +249,7 @@ "Server-side encryption" : "Serverseitige Verschlüsselung", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Serverseitige Verschlüsselung ermöglicht es die auf diesen Server hochgeladenen Dateien zu verschlüsseln. Dies führt allerdings auch zu Nachteilen, wie z.B. einem Geschwindigkeitsverlust. Sie sollte deshalb nur eingeschaltet werden, wenn sie wirklich benötigt wird.", "Enable server-side encryption" : "Serverseitige Verschlüsselung aktivieren", + "Please read carefully before activating server-side encryption:" : "Bitte vor Aktivierung der serverseitigen Verschlüsselung sorgfältig lesen:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Wird die Verschlüsselung einmal aktiviert, so werden alle ab diesem Zeitpunkt hochgeladene Dateien verschlüsselt. Sie kann nur wieder deaktiviert werden, wenn das Verschlüsselungsmodul dies unterstützt und alle Voraussetzungen (wie das Setzen eines Wiederherstellungsschlüssels) im Vorhinein erfüllt wurden.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Verschlüsselung alleine garantiert nicht die Systemsicherheit. Bitte lese in der Dokumentation nach, wie die Verschlüsselungs-app funktioniert und welche Anwendungsfälle unterstützt werden.", "Be aware that encryption always increases the file size." : "Bedenken Sie, dass durch die Verschlüsselung die Dateigröße zunimmt. ", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "Dies ist die letzte Warnung: Möchten Sie die Verschlüsselung wirklich aktivieren?", "No encryption module loaded, please enable an encryption module in the app menu." : "Es wurde kein Verschlüsselungs-Modul geladen, bitte ein Verschlüsselungs-Modul im Anwendungs-Menü aktivieren.", "Select default encryption module:" : "Standard-Verschlüsselungs-Modul auswählen:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Sie müssen Ihre Verschlüsselungsschlüssel von der alten Verschlüsselung (ownCloud <= 8.0) auf die neue migrieren. Bitte aktivieren Sie das \"Standardverschlüsselungsmodul\" und führen Sie {command} aus", + "Unable to update server side encryption config" : "Serverseitige Verschlüsselungskonfiguration kann nicht aktualisiert werden", "Rename group" : "Gruppe umbenennen", "Remove group" : "Gruppe entfernen", "You are about to remove the group {group}. The users will NOT be deleted." : "Sie sind im Begriff, die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.", diff --git a/apps/settings/l10n/eu.js b/apps/settings/l10n/eu.js index 7b72e5a8ac7..a313960d0db 100644 --- a/apps/settings/l10n/eu.js +++ b/apps/settings/l10n/eu.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "Zerbitzariaren aldeko zifratzea", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Zerbitzari-aldeko enkriptazioak zerbitzarira igotzen diren fitxategiak enkriptatzeabaimentzen du. Honek eraginkortasuna jaitsi dezake, beraz gaitu beharrezkoa bada soilik. ", "Enable server-side encryption" : "Gaitu zerbitzariaren aldeko zifratzea", + "Please read carefully before activating server-side encryption:" : "Irakurri arretaz zerbitzariaren aldeko zifratzea gaitu aurretik mesedez:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Zifratzea gaitu ondoren zerbitzarira igotako fitxategi guztiak zifratu egingo dira . Zifratzea geroago desgaitu daiteke zifratze-modulu aktiboak funtzio hori onartzen badu eta aurrebaldintza guztiak (adibidez, berreskuratze-gako bat ezartzea) betetzen badira.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Zifratze hutsak ez du sistemaren segurtasuna bermatzen. Begiratu dokumentazioa zifratze-aplikazioak nola funtzionatzen duen jakiteko eta zein erabiltzaile-kasu onartzen den ezagutzeko.", "Be aware that encryption always increases the file size." : "Kontuan izan zifratzeak beti fitxategiaren tamaina handitzen duela.", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "Azken abisua da: Benetan gaitu nahi duzu zifratzea?", "No encryption module loaded, please enable an encryption module in the app menu." : "Ez da zifratze-modulurik kargatu, mesedez gaitu zifratze-modulu bat app-aren menuan. ", "Select default encryption module:" : "Hautatu zifratze-modulu lehenetsia:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Zifratze-gakoak zifratze-sistema zaharretik (ownCloud <=8.0) sistema berrira migratu behar duzu. Gaitu mesedez \"Zifratze modulu lehenetsia\" eta {command} exekuta ezazu", + "Unable to update server side encryption config" : "Ezin izan da zerbitzariaren aldeko zifratzearen konfigurazioa eguneratu", "Rename group" : "Berrizendatu taldea", "Remove group" : "Ezabatu taldea", "You are about to remove the group {group}. The users will NOT be deleted." : "{group} taldea ezabatzera zoaz. Erabiltzaileak EZ dira ezabatuko.", diff --git a/apps/settings/l10n/eu.json b/apps/settings/l10n/eu.json index f0fc5be9572..71694e6aa59 100644 --- a/apps/settings/l10n/eu.json +++ b/apps/settings/l10n/eu.json @@ -249,6 +249,7 @@ "Server-side encryption" : "Zerbitzariaren aldeko zifratzea", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Zerbitzari-aldeko enkriptazioak zerbitzarira igotzen diren fitxategiak enkriptatzeabaimentzen du. Honek eraginkortasuna jaitsi dezake, beraz gaitu beharrezkoa bada soilik. ", "Enable server-side encryption" : "Gaitu zerbitzariaren aldeko zifratzea", + "Please read carefully before activating server-side encryption:" : "Irakurri arretaz zerbitzariaren aldeko zifratzea gaitu aurretik mesedez:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Zifratzea gaitu ondoren zerbitzarira igotako fitxategi guztiak zifratu egingo dira . Zifratzea geroago desgaitu daiteke zifratze-modulu aktiboak funtzio hori onartzen badu eta aurrebaldintza guztiak (adibidez, berreskuratze-gako bat ezartzea) betetzen badira.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Zifratze hutsak ez du sistemaren segurtasuna bermatzen. Begiratu dokumentazioa zifratze-aplikazioak nola funtzionatzen duen jakiteko eta zein erabiltzaile-kasu onartzen den ezagutzeko.", "Be aware that encryption always increases the file size." : "Kontuan izan zifratzeak beti fitxategiaren tamaina handitzen duela.", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "Azken abisua da: Benetan gaitu nahi duzu zifratzea?", "No encryption module loaded, please enable an encryption module in the app menu." : "Ez da zifratze-modulurik kargatu, mesedez gaitu zifratze-modulu bat app-aren menuan. ", "Select default encryption module:" : "Hautatu zifratze-modulu lehenetsia:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Zifratze-gakoak zifratze-sistema zaharretik (ownCloud <=8.0) sistema berrira migratu behar duzu. Gaitu mesedez \"Zifratze modulu lehenetsia\" eta {command} exekuta ezazu", + "Unable to update server side encryption config" : "Ezin izan da zerbitzariaren aldeko zifratzearen konfigurazioa eguneratu", "Rename group" : "Berrizendatu taldea", "Remove group" : "Ezabatu taldea", "You are about to remove the group {group}. The users will NOT be deleted." : "{group} taldea ezabatzera zoaz. Erabiltzaileak EZ dira ezabatuko.", diff --git a/apps/settings/l10n/pl.js b/apps/settings/l10n/pl.js index 07ed90697d5..79af028415a 100644 --- a/apps/settings/l10n/pl.js +++ b/apps/settings/l10n/pl.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "Szyfrowanie po stronie serwera", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Szyfrowanie po stronie serwera umożliwia szyfrowanie plików przesyłanych na ten serwer. Wiąże się to z ograniczeniami, takimi jak spadkiem wydajności, więc włącz to tylko w razie potrzeby.", "Enable server-side encryption" : "Włącz szyfrowanie po stronie serwera", + "Please read carefully before activating server-side encryption:" : "Przeczytaj uważnie przed aktywacją szyfrowania po stronie serwera:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Po włączeniu szyfrowania wszystkie pliki wysłane na serwer od tej chwili będą szyfrowane na serwerze. Wyłączenie szyfrowania będzie możliwe dopiero, gdy aktywny moduł szyfrowania wykona tę funkcję oraz wszystkie poprzednie warunki będą spełnione (np. ustawienie klucza odzyskiwania).", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Samo szyfrowanie nie gwarantuje bezpieczeństwa systemu. Więcej informacji na temat działania aplikacji szyfrującej i użycia wspieranych przypadków można znaleźć w dokumentacji.", "Be aware that encryption always increases the file size." : "Należy pamiętać, że szyfrowanie zawsze zwiększa rozmiar pliku.", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "To ostatnie ostrzeżenie: Czy na pewno chcesz włączyć szyfrowanie?", "No encryption module loaded, please enable an encryption module in the app menu." : "Moduł szyfrowania nie jest załadowany, należy włączyć moduł szyfrowania w menu aplikacji.", "Select default encryption module:" : "Wybierz domyślny moduł szyfrowania:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Musisz zmigrować swoje klucze szyfrujące ze starego szyfrowania (ownCloud <= 8.0) do nowego. Włącz \"Domyślny moduł szyfrowania\" i uruchom {command}", + "Unable to update server side encryption config" : "Nie można zaktualizować konfiguracji szyfrowania po stronie serwera", "Rename group" : "Zmień nazwę grupy", "Remove group" : "Usuń grupę", "You are about to remove the group {group}. The users will NOT be deleted." : "Zamierzasz usunąć grupę {group}. Użytkownicy NIE zostaną usunięci.", diff --git a/apps/settings/l10n/pl.json b/apps/settings/l10n/pl.json index 9134c708003..e21012fab70 100644 --- a/apps/settings/l10n/pl.json +++ b/apps/settings/l10n/pl.json @@ -249,6 +249,7 @@ "Server-side encryption" : "Szyfrowanie po stronie serwera", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Szyfrowanie po stronie serwera umożliwia szyfrowanie plików przesyłanych na ten serwer. Wiąże się to z ograniczeniami, takimi jak spadkiem wydajności, więc włącz to tylko w razie potrzeby.", "Enable server-side encryption" : "Włącz szyfrowanie po stronie serwera", + "Please read carefully before activating server-side encryption:" : "Przeczytaj uważnie przed aktywacją szyfrowania po stronie serwera:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Po włączeniu szyfrowania wszystkie pliki wysłane na serwer od tej chwili będą szyfrowane na serwerze. Wyłączenie szyfrowania będzie możliwe dopiero, gdy aktywny moduł szyfrowania wykona tę funkcję oraz wszystkie poprzednie warunki będą spełnione (np. ustawienie klucza odzyskiwania).", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Samo szyfrowanie nie gwarantuje bezpieczeństwa systemu. Więcej informacji na temat działania aplikacji szyfrującej i użycia wspieranych przypadków można znaleźć w dokumentacji.", "Be aware that encryption always increases the file size." : "Należy pamiętać, że szyfrowanie zawsze zwiększa rozmiar pliku.", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "To ostatnie ostrzeżenie: Czy na pewno chcesz włączyć szyfrowanie?", "No encryption module loaded, please enable an encryption module in the app menu." : "Moduł szyfrowania nie jest załadowany, należy włączyć moduł szyfrowania w menu aplikacji.", "Select default encryption module:" : "Wybierz domyślny moduł szyfrowania:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Musisz zmigrować swoje klucze szyfrujące ze starego szyfrowania (ownCloud <= 8.0) do nowego. Włącz \"Domyślny moduł szyfrowania\" i uruchom {command}", + "Unable to update server side encryption config" : "Nie można zaktualizować konfiguracji szyfrowania po stronie serwera", "Rename group" : "Zmień nazwę grupy", "Remove group" : "Usuń grupę", "You are about to remove the group {group}. The users will NOT be deleted." : "Zamierzasz usunąć grupę {group}. Użytkownicy NIE zostaną usunięci.", diff --git a/apps/settings/l10n/pt_BR.js b/apps/settings/l10n/pt_BR.js index 1cb5e7faa43..5825561248e 100644 --- a/apps/settings/l10n/pt_BR.js +++ b/apps/settings/l10n/pt_BR.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "Criptografia do lado do servidor", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "A criptografia do lado do servidor torna possível criptografar arquivos que são carregados para este servidor. Isso diminui um pouco o desempenho portanto habilite apenas se necessário.", "Enable server-side encryption" : "Ativar a criptografia do lado do servidor", + "Please read carefully before activating server-side encryption:" : "Leia atentamente antes de ativar a criptografia do lado do servidor:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Uma vez que a criptografia é ativada, todos os arquivos enviados ao servidor a partir desse ponto em diante serão criptografados e assim ficarão no servidor. Só será possível desativar a criptografia em uma data posterior se o módulo de criptografia ativo suportar essa função e todas as pré-condições sejam cumpridas (ex., defininindo uma chave de recuperação).", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Criptografia por si só não garante a segurança do sistema. Por favor, veja a documentação para mais informações sobe como o aplicativo de criptografia funciona e os casos de uso suportados.", "Be aware that encryption always increases the file size." : "Esteja ciente de que a criptografia sempre aumenta o tamanho do arquivo.", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "Este é o aviso final: Você realmente quer ativar a criptografia?", "No encryption module loaded, please enable an encryption module in the app menu." : "Nenhum módulo de criptografia carregado. Por favor, ative um deles no menu de aplicativos.", "Select default encryption module:" : "Selecione o módulo de criptografia padrão:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Você precisa migrar suas chaves de criptografia da criptografia antiga (ownCloud <= 8.0) para a nova. Ative o \"módulo de criptografia padrão\" e execute {command}", + "Unable to update server side encryption config" : "Não foi possível atualizar a configuração de criptografia do lado do servidor", "Rename group" : "Renomear grupo", "Remove group" : "Excluir grupo", "You are about to remove the group {group}. The users will NOT be deleted." : "Você está prestes a remover o grupo {group}. Os usuários NÃO serão apagados.", diff --git a/apps/settings/l10n/pt_BR.json b/apps/settings/l10n/pt_BR.json index fed1ac38891..2a46ebce40f 100644 --- a/apps/settings/l10n/pt_BR.json +++ b/apps/settings/l10n/pt_BR.json @@ -249,6 +249,7 @@ "Server-side encryption" : "Criptografia do lado do servidor", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "A criptografia do lado do servidor torna possível criptografar arquivos que são carregados para este servidor. Isso diminui um pouco o desempenho portanto habilite apenas se necessário.", "Enable server-side encryption" : "Ativar a criptografia do lado do servidor", + "Please read carefully before activating server-side encryption:" : "Leia atentamente antes de ativar a criptografia do lado do servidor:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Uma vez que a criptografia é ativada, todos os arquivos enviados ao servidor a partir desse ponto em diante serão criptografados e assim ficarão no servidor. Só será possível desativar a criptografia em uma data posterior se o módulo de criptografia ativo suportar essa função e todas as pré-condições sejam cumpridas (ex., defininindo uma chave de recuperação).", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Criptografia por si só não garante a segurança do sistema. Por favor, veja a documentação para mais informações sobe como o aplicativo de criptografia funciona e os casos de uso suportados.", "Be aware that encryption always increases the file size." : "Esteja ciente de que a criptografia sempre aumenta o tamanho do arquivo.", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "Este é o aviso final: Você realmente quer ativar a criptografia?", "No encryption module loaded, please enable an encryption module in the app menu." : "Nenhum módulo de criptografia carregado. Por favor, ative um deles no menu de aplicativos.", "Select default encryption module:" : "Selecione o módulo de criptografia padrão:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Você precisa migrar suas chaves de criptografia da criptografia antiga (ownCloud <= 8.0) para a nova. Ative o \"módulo de criptografia padrão\" e execute {command}", + "Unable to update server side encryption config" : "Não foi possível atualizar a configuração de criptografia do lado do servidor", "Rename group" : "Renomear grupo", "Remove group" : "Excluir grupo", "You are about to remove the group {group}. The users will NOT be deleted." : "Você está prestes a remover o grupo {group}. Os usuários NÃO serão apagados.", diff --git a/apps/settings/l10n/tr.js b/apps/settings/l10n/tr.js index 7728350e01f..553ff705628 100644 --- a/apps/settings/l10n/tr.js +++ b/apps/settings/l10n/tr.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "Sunucu tarafı şifreleme", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Sunucu tarafındaki şifreleme, sunucuya yüklenen dosyaların şifrelenebilmesini sağlar. Bu özellik genel başarımı düşürdüğünden yalnızca gerek varsa etkinleştirin.", "Enable server-side encryption" : "Sunucu tarafı şifreleme kullanılsın", + "Please read carefully before activating server-side encryption:" : "Lütfen sunucu tarafında şifrelemeyi etkinleştirmeden önce dikkatlice okuyun:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Şifreleme etkinleştirildiğinde, etkinleştirme anından sonra sunucuya yüklenen tüm dosyalar şifrelenir. Şifreleme daha sonra devre dışı bırakılmak istenirse, etkin şifreleme modülünün bu özelliği desteklemesi ve tüm ön koşulların (örneğin kurtarma anahtarı oluşturulması) yerine getirilmesi gerekir.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Şifreleme tek başına sistemin güvenliğini garanti etmez. Lütfen şifreleme uygulamasının nasıl çalıştığı ve desteklenen kullanım şekilleri hakkında ayrıntılı bilgi almak için belgelere bakabilirsiniz.", "Be aware that encryption always increases the file size." : "Şifreleme işleminin dosya boyutlarını büyüteceğini unutmayın.", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "Son uyarı: Şifrelemeyi etkinleştirmek istiyor musunuz?", "No encryption module loaded, please enable an encryption module in the app menu." : "Herhangi bir şifrelenme modülü yüklenmemiş. Lütfen uygulama menüsünden bir şifreleme modülünü etkinleştirin.", "Select default encryption module:" : "Varsayılan şifreleme modülünü seçin:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Şifreleme anahtarlarınızı eski şifrelemeden (ownCloud <= 8.0) yenisine aktarmalısınız. Lütfen \"Varsayılan şifreleme modülü\"nü etkinleştirip {command} komutunu yürütün", + "Unable to update server side encryption config" : "Sunucu tarafı şifreleme yapılandırması güncellenemedi", "Rename group" : "Grubu yeniden adlandır", "Remove group" : "Grubu sil", "You are about to remove the group {group}. The users will NOT be deleted." : "{group} grubunu silmek üzeresiniz. Kullanıcılar SİLİNMEYECEK.", diff --git a/apps/settings/l10n/tr.json b/apps/settings/l10n/tr.json index 85e3c078c27..b4b6b91595d 100644 --- a/apps/settings/l10n/tr.json +++ b/apps/settings/l10n/tr.json @@ -249,6 +249,7 @@ "Server-side encryption" : "Sunucu tarafı şifreleme", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "Sunucu tarafındaki şifreleme, sunucuya yüklenen dosyaların şifrelenebilmesini sağlar. Bu özellik genel başarımı düşürdüğünden yalnızca gerek varsa etkinleştirin.", "Enable server-side encryption" : "Sunucu tarafı şifreleme kullanılsın", + "Please read carefully before activating server-side encryption:" : "Lütfen sunucu tarafında şifrelemeyi etkinleştirmeden önce dikkatlice okuyun:", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "Şifreleme etkinleştirildiğinde, etkinleştirme anından sonra sunucuya yüklenen tüm dosyalar şifrelenir. Şifreleme daha sonra devre dışı bırakılmak istenirse, etkin şifreleme modülünün bu özelliği desteklemesi ve tüm ön koşulların (örneğin kurtarma anahtarı oluşturulması) yerine getirilmesi gerekir.", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "Şifreleme tek başına sistemin güvenliğini garanti etmez. Lütfen şifreleme uygulamasının nasıl çalıştığı ve desteklenen kullanım şekilleri hakkında ayrıntılı bilgi almak için belgelere bakabilirsiniz.", "Be aware that encryption always increases the file size." : "Şifreleme işleminin dosya boyutlarını büyüteceğini unutmayın.", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "Son uyarı: Şifrelemeyi etkinleştirmek istiyor musunuz?", "No encryption module loaded, please enable an encryption module in the app menu." : "Herhangi bir şifrelenme modülü yüklenmemiş. Lütfen uygulama menüsünden bir şifreleme modülünü etkinleştirin.", "Select default encryption module:" : "Varsayılan şifreleme modülünü seçin:", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "Şifreleme anahtarlarınızı eski şifrelemeden (ownCloud <= 8.0) yenisine aktarmalısınız. Lütfen \"Varsayılan şifreleme modülü\"nü etkinleştirip {command} komutunu yürütün", + "Unable to update server side encryption config" : "Sunucu tarafı şifreleme yapılandırması güncellenemedi", "Rename group" : "Grubu yeniden adlandır", "Remove group" : "Grubu sil", "You are about to remove the group {group}. The users will NOT be deleted." : "{group} grubunu silmek üzeresiniz. Kullanıcılar SİLİNMEYECEK.", diff --git a/apps/settings/l10n/zh_HK.js b/apps/settings/l10n/zh_HK.js index c5a9da96fd9..76e4fe0b108 100644 --- a/apps/settings/l10n/zh_HK.js +++ b/apps/settings/l10n/zh_HK.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "伺服器端加密", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "伺服器端加密可以加密所有上傳到此伺服器的檔案，但這會讓檔案操作時間增加，降低效能，請審慎評估後再啟用。", "Enable server-side encryption" : "啟用伺服器端加密", + "Please read carefully before activating server-side encryption:" : "在您啟動伺服器端加密之前，請仔細閱讀：", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "一旦啟用加密，從那時開始上傳到伺服器的檔案都會被加密，若日後要停用加密，需要作用中加密模組的支援，而且所有的設定（例如：還原金鑰）都正確。", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "單獨加密不能保證系統安全性。請參考加密應用程式運作原理，及支援的使用案例的文件，以取得更多資訊。", "Be aware that encryption always increases the file size." : "請注意，加密一定會增加檔案的大小。", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "這是最後的警告：請問您真的要開啟加密模式？", "No encryption module loaded, please enable an encryption module in the app menu." : "沒有載入加密模組，請您在應用程式選單中啟用加密模組", "Select default encryption module:" : "選擇預設的加密模組：", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "您必須將您的加密密鑰從舊的加密（ownCloud <= 8.0）遷移到新的。請啟用「預設加密模組」並執行 {command}", + "Unable to update server side encryption config" : "無法更新伺服器端加密配置", "Rename group" : "重新命名群組", "Remove group" : "移除群組", "You are about to remove the group {group}. The users will NOT be deleted." : "您將要移除群組 {group}。用戶將不會被刪除。", diff --git a/apps/settings/l10n/zh_HK.json b/apps/settings/l10n/zh_HK.json index 5967d7533cb..25dd36049b5 100644 --- a/apps/settings/l10n/zh_HK.json +++ b/apps/settings/l10n/zh_HK.json @@ -249,6 +249,7 @@ "Server-side encryption" : "伺服器端加密", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "伺服器端加密可以加密所有上傳到此伺服器的檔案，但這會讓檔案操作時間增加，降低效能，請審慎評估後再啟用。", "Enable server-side encryption" : "啟用伺服器端加密", + "Please read carefully before activating server-side encryption:" : "在您啟動伺服器端加密之前，請仔細閱讀：", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "一旦啟用加密，從那時開始上傳到伺服器的檔案都會被加密，若日後要停用加密，需要作用中加密模組的支援，而且所有的設定（例如：還原金鑰）都正確。", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "單獨加密不能保證系統安全性。請參考加密應用程式運作原理，及支援的使用案例的文件，以取得更多資訊。", "Be aware that encryption always increases the file size." : "請注意，加密一定會增加檔案的大小。", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "這是最後的警告：請問您真的要開啟加密模式？", "No encryption module loaded, please enable an encryption module in the app menu." : "沒有載入加密模組，請您在應用程式選單中啟用加密模組", "Select default encryption module:" : "選擇預設的加密模組：", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "您必須將您的加密密鑰從舊的加密（ownCloud <= 8.0）遷移到新的。請啟用「預設加密模組」並執行 {command}", + "Unable to update server side encryption config" : "無法更新伺服器端加密配置", "Rename group" : "重新命名群組", "Remove group" : "移除群組", "You are about to remove the group {group}. The users will NOT be deleted." : "您將要移除群組 {group}。用戶將不會被刪除。", diff --git a/apps/settings/l10n/zh_TW.js b/apps/settings/l10n/zh_TW.js index 40e1ea776b3..d7d8098ebc3 100644 --- a/apps/settings/l10n/zh_TW.js +++ b/apps/settings/l10n/zh_TW.js @@ -251,6 +251,7 @@ OC.L10N.register( "Server-side encryption" : "伺服器端加密", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "伺服器端加密可以加密所有上傳到此伺服器的檔案，但這會讓檔案操作時間增加，降低效能，請審慎評估後再啟用。", "Enable server-side encryption" : "啟用伺服器端加密", + "Please read carefully before activating server-side encryption:" : "在啟動伺服器端加密前，請先仔細閱讀：", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "一旦啟用加密，從那時開始上傳到伺服器的檔案都會被加密，若日後要停用加密，需要作用中加密模組的支援，而且所有的設定（例如：還原金鑰）都正確。", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "單獨加密不能保證系統安全性。請參考加密應用程式運作原理，及支援的使用案例的文件，以取得更多資訊。", "Be aware that encryption always increases the file size." : "請注意，加密一定會增加檔案的大小。", @@ -258,6 +259,8 @@ OC.L10N.register( "This is the final warning: Do you really want to enable encryption?" : "這是最後的警告：請問您真的要開啟加密模式？", "No encryption module loaded, please enable an encryption module in the app menu." : "沒有載入加密模組，請您在應用程式選單中啟用加密模組", "Select default encryption module:" : "選擇預設的加密模組：", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "您必須將您的加密金鑰從舊的加密 (ownCloud <= 8.0) 轉換成新的。請啟用 \"Default encryption module\" 並執行 {command}", + "Unable to update server side encryption config" : "無法升級伺服器端加密設定", "Rename group" : "重新命名群組", "Remove group" : "移除群組", "You are about to remove the group {group}. The users will NOT be deleted." : "您將要移除群組 {group}。使用者將不會被刪除。", diff --git a/apps/settings/l10n/zh_TW.json b/apps/settings/l10n/zh_TW.json index bd82ebe5cd7..62095fc475a 100644 --- a/apps/settings/l10n/zh_TW.json +++ b/apps/settings/l10n/zh_TW.json @@ -249,6 +249,7 @@ "Server-side encryption" : "伺服器端加密", "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "伺服器端加密可以加密所有上傳到此伺服器的檔案，但這會讓檔案操作時間增加，降低效能，請審慎評估後再啟用。", "Enable server-side encryption" : "啟用伺服器端加密", + "Please read carefully before activating server-side encryption:" : "在啟動伺服器端加密前，請先仔細閱讀：", "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "一旦啟用加密，從那時開始上傳到伺服器的檔案都會被加密，若日後要停用加密，需要作用中加密模組的支援，而且所有的設定（例如：還原金鑰）都正確。", "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "單獨加密不能保證系統安全性。請參考加密應用程式運作原理，及支援的使用案例的文件，以取得更多資訊。", "Be aware that encryption always increases the file size." : "請注意，加密一定會增加檔案的大小。", @@ -256,6 +257,8 @@ "This is the final warning: Do you really want to enable encryption?" : "這是最後的警告：請問您真的要開啟加密模式？", "No encryption module loaded, please enable an encryption module in the app menu." : "沒有載入加密模組，請您在應用程式選單中啟用加密模組", "Select default encryption module:" : "選擇預設的加密模組：", + "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run {command}" : "您必須將您的加密金鑰從舊的加密 (ownCloud <= 8.0) 轉換成新的。請啟用 \"Default encryption module\" 並執行 {command}", + "Unable to update server side encryption config" : "無法升級伺服器端加密設定", "Rename group" : "重新命名群組", "Remove group" : "移除群組", "You are about to remove the group {group}. The users will NOT be deleted." : "您將要移除群組 {group}。使用者將不會被刪除。", diff --git a/core/l10n/cs.js b/core/l10n/cs.js index 0bb8d29fbf4..57456a031c8 100644 --- a/core/l10n/cs.js +++ b/core/l10n/cs.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Této instanci chybí některé doporučené moduly pro PHP. V zájmu lepšího výkonu a kompatibility, je důrazně doporučeno je nainstalovat.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Ačkoli je zapnutá aplikace pro opatřování motivem vzhledu, není zapnutý PHP modul „imagick“. Aby vytváření ikon webů správně fungovalo, je zapotřebí tento modul nainstalovat a zapnout.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "PHP moduly „gmp“ a/nebo „bcmath“ nejsou zapnuté. Pro používání bezheslového WebAuthn ověřování jsou tyto moduly nezbytné.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Zdá se, že provozujete 32bitovou verzi PHP. Aby správně fungoval, potřebuje Nextcloud 64bit. Přejděte na 64bit instalaci operačního systému a PHP! Bližší podrobnosti naleznete {linkstart}na stránce v dokumentaci ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Modul php-imagick v tomto případě nemá žádnou podporu SVG. Pro lepší kompatibilitu se doporučuje nainstalovat.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "U některých sloupců tabulek databáze doposud nebyla provedena konverze na datový typ big int. To proto, že změna typů sloupců ve velkých tabulkách může trvat dlouho a proto nebylo provedeno automaticky. Provedení je možné spustit ručně a to spuštěním příkazu „occ db: convert-filecache-bigint“. Ovšem provést lze jen tehdy, když je instance Nexcloud odstavená. Další podrobnosti naleznete {linkstart}na stránce v dokumentaci, pojednávající o tomto↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Jako podpůrná databázová vrstva je nyní používáno SQLite. Pro větší instalace doporučujeme přejít na jinou databázi.", diff --git a/core/l10n/cs.json b/core/l10n/cs.json index af03124b021..91376fd4987 100644 --- a/core/l10n/cs.json +++ b/core/l10n/cs.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Této instanci chybí některé doporučené moduly pro PHP. V zájmu lepšího výkonu a kompatibility, je důrazně doporučeno je nainstalovat.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Ačkoli je zapnutá aplikace pro opatřování motivem vzhledu, není zapnutý PHP modul „imagick“. Aby vytváření ikon webů správně fungovalo, je zapotřebí tento modul nainstalovat a zapnout.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "PHP moduly „gmp“ a/nebo „bcmath“ nejsou zapnuté. Pro používání bezheslového WebAuthn ověřování jsou tyto moduly nezbytné.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Zdá se, že provozujete 32bitovou verzi PHP. Aby správně fungoval, potřebuje Nextcloud 64bit. Přejděte na 64bit instalaci operačního systému a PHP! Bližší podrobnosti naleznete {linkstart}na stránce v dokumentaci ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Modul php-imagick v tomto případě nemá žádnou podporu SVG. Pro lepší kompatibilitu se doporučuje nainstalovat.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "U některých sloupců tabulek databáze doposud nebyla provedena konverze na datový typ big int. To proto, že změna typů sloupců ve velkých tabulkách může trvat dlouho a proto nebylo provedeno automaticky. Provedení je možné spustit ručně a to spuštěním příkazu „occ db: convert-filecache-bigint“. Ovšem provést lze jen tehdy, když je instance Nexcloud odstavená. Další podrobnosti naleznete {linkstart}na stránce v dokumentaci, pojednávající o tomto↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Jako podpůrná databázová vrstva je nyní používáno SQLite. Pro větší instalace doporučujeme přejít na jinou databázi.", diff --git a/core/l10n/de.js b/core/l10n/de.js index ab6ea9bc868..e85add45c6c 100644 --- a/core/l10n/de.js +++ b/core/l10n/de.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Dieser Installation fehlen einige empfohlene PHP-Module. Für bessere Leistung und bessere Kompatibilität wird dringend empfohlen, diese zu installieren.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Das PHP-Modul \"imagick\" ist nicht aktiviert, die Theming-App hingegen schon. Damit die Favicon-Generierung korrekt funktioniert, musst Du dieses Modul installieren und aktivieren.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Die PHP-Module „gmp“ und/oder „bcmath“ sind nicht aktiviert. Wenn Du die passwortlose WebAuthn-Authentifizierung verwendest, sind diese Module erforderlich.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Anscheinend führst Du eine 32-Bit-PHP-Version aus. Nextcloud benötigt 64bit, um gut zu laufen. Bitte aktualisiere Dein Betriebssystem und PHP auf 64bit! Für weitere Details lese bitte die {linkstart}diesbezügliche Dokumentationsseite ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Dem Modul php-imagick fehlt die SVG-Unterstützung. Für eine bessere Kompatibilität wird empfohlen, es zu installieren.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Bei einigen Spalten in der Datenbank fehlt eine Konvertierung in big int. Da das Ändern von Spaltentypen bei großen Tabellen einige Zeit dauern kann, wurden sie nicht automatisch geändert. Durch Ausführen von \"occ db:convert-filecache-bigint\" können diese ausstehenden Änderungen manuell übernommen werden. Diese Operation muss ausgeführt werden, während die Instanz offline ist. Weitere Details findest Du auf {linkstart}der zugehörigen Dokumentationsseite ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Derzeit wird als Datenbank SQLite verwendet. Bei größeren Installationen wird empfohlen, auf ein anderes Datenbank-Backend zu wechseln.", diff --git a/core/l10n/de.json b/core/l10n/de.json index 4f30b6aa535..d0a84d45112 100644 --- a/core/l10n/de.json +++ b/core/l10n/de.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Dieser Installation fehlen einige empfohlene PHP-Module. Für bessere Leistung und bessere Kompatibilität wird dringend empfohlen, diese zu installieren.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Das PHP-Modul \"imagick\" ist nicht aktiviert, die Theming-App hingegen schon. Damit die Favicon-Generierung korrekt funktioniert, musst Du dieses Modul installieren und aktivieren.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Die PHP-Module „gmp“ und/oder „bcmath“ sind nicht aktiviert. Wenn Du die passwortlose WebAuthn-Authentifizierung verwendest, sind diese Module erforderlich.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Anscheinend führst Du eine 32-Bit-PHP-Version aus. Nextcloud benötigt 64bit, um gut zu laufen. Bitte aktualisiere Dein Betriebssystem und PHP auf 64bit! Für weitere Details lese bitte die {linkstart}diesbezügliche Dokumentationsseite ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Dem Modul php-imagick fehlt die SVG-Unterstützung. Für eine bessere Kompatibilität wird empfohlen, es zu installieren.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Bei einigen Spalten in der Datenbank fehlt eine Konvertierung in big int. Da das Ändern von Spaltentypen bei großen Tabellen einige Zeit dauern kann, wurden sie nicht automatisch geändert. Durch Ausführen von \"occ db:convert-filecache-bigint\" können diese ausstehenden Änderungen manuell übernommen werden. Diese Operation muss ausgeführt werden, während die Instanz offline ist. Weitere Details findest Du auf {linkstart}der zugehörigen Dokumentationsseite ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Derzeit wird als Datenbank SQLite verwendet. Bei größeren Installationen wird empfohlen, auf ein anderes Datenbank-Backend zu wechseln.", diff --git a/core/l10n/de_DE.js b/core/l10n/de_DE.js index a9ed7739af2..b4329972d47 100644 --- a/core/l10n/de_DE.js +++ b/core/l10n/de_DE.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Dieser Installation fehlen einige empfohlene PHP-Module. Für bessere Leistung und bessere Kompatibilität wird dringend empfohlen, diese zu installieren.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Das PHP-Modul \"imagick\" ist nicht aktiviert, die Theming-App hingegen schon. Damit die Favicon-Generierung korrekt funktioniert, müssen Sie dieses Modul installieren und aktivieren.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Die PHP-Module „gmp“ und/oder „bcmath“ sind nicht aktiviert. Wenn Sie die passwortlose WebAuthn-Authentifizierung verwenden, sind diese Module erforderlich.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Sie scheinen eine 32-Bit-PHP-Version auszuführen. Nextcloud benötigt 64bit, um gut zu laufen. Bitte aktualisieren Sie Ihr Betriebssystem und PHP auf 64bit! Für weitere Details lesen Sie die {linkstart}diesbezügliche Dokumentationsseite ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Dem Modul php-imagick fehlt die SVG-Unterstützung. Für eine bessere Kompatibilität wird empfohlen, es zu installieren.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Bei einigen Spalten in der Datenbank fehlt eine Konvertierung in big int. Aufgrund der Tatsache, dass das Ändern von Spaltentypen bei großen Tabellen einige Zeit dauern kann, wurden sie nicht automatisch geändert. Durch Ausführen von \"occ db:convert-filecache-bigint\" können diese ausstehenden Änderungen manuell übernommen werden. Diese Operation muss ausgeführt werden, während die Instanz offline ist. Weitere Details finden Sie auf {linkstart}der zugehörigen Dokumentationsseite ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wird als Datenbank verwendet. Bei größeren Installationen wird empfohlen, auf ein anderes Datenbank-Backend zu wechseln.", diff --git a/core/l10n/de_DE.json b/core/l10n/de_DE.json index 1e87e58814e..e1ba551cbec 100644 --- a/core/l10n/de_DE.json +++ b/core/l10n/de_DE.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Dieser Installation fehlen einige empfohlene PHP-Module. Für bessere Leistung und bessere Kompatibilität wird dringend empfohlen, diese zu installieren.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Das PHP-Modul \"imagick\" ist nicht aktiviert, die Theming-App hingegen schon. Damit die Favicon-Generierung korrekt funktioniert, müssen Sie dieses Modul installieren und aktivieren.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Die PHP-Module „gmp“ und/oder „bcmath“ sind nicht aktiviert. Wenn Sie die passwortlose WebAuthn-Authentifizierung verwenden, sind diese Module erforderlich.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Sie scheinen eine 32-Bit-PHP-Version auszuführen. Nextcloud benötigt 64bit, um gut zu laufen. Bitte aktualisieren Sie Ihr Betriebssystem und PHP auf 64bit! Für weitere Details lesen Sie die {linkstart}diesbezügliche Dokumentationsseite ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Dem Modul php-imagick fehlt die SVG-Unterstützung. Für eine bessere Kompatibilität wird empfohlen, es zu installieren.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Bei einigen Spalten in der Datenbank fehlt eine Konvertierung in big int. Aufgrund der Tatsache, dass das Ändern von Spaltentypen bei großen Tabellen einige Zeit dauern kann, wurden sie nicht automatisch geändert. Durch Ausführen von \"occ db:convert-filecache-bigint\" können diese ausstehenden Änderungen manuell übernommen werden. Diese Operation muss ausgeführt werden, während die Instanz offline ist. Weitere Details finden Sie auf {linkstart}der zugehörigen Dokumentationsseite ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wird als Datenbank verwendet. Bei größeren Installationen wird empfohlen, auf ein anderes Datenbank-Backend zu wechseln.", diff --git a/core/l10n/eu.js b/core/l10n/eu.js index 42c744fcb79..89f375cb411 100644 --- a/core/l10n/eu.js +++ b/core/l10n/eu.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Instantzia honek gomendatutako PHP modulu batzuk falta ditu. Biziki gomendatzen da horiek instalatzea, errendimendua eta bateragarritasuna hobetzeko.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "\"Imagick\" PHP modulua ez dago gaituta, gaikako aplikazioa badago ere. Faviconen sorrerak behar bezala funtziona dezan, modulu hau instalatu eta gaitu behar duzu.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "\"gmp\" eta/edo \"bcmath\" PHP moduluak ez daude gaituta. WebAuthn pasahitz gabeko autentifikazioa erabiltzen baduzu, modulu hauek beharrezkoak dira.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Badirudi 32bit-eko PHP bertsioa exekutatzen ari zarela. Nextcloudek 64bit behar ditu ondo funtzionatzeko. Eguneratu zure SE eta PHP 64bit-etara! Xehetasun gehiagorako irakurri {linkstart}honi buruzko dokumentazioa ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Module php-imagick-ek ez du SVG onartzen instantzia honetan. Bateragarritasuna hobetzeko instalatzea gomendatzen da.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Datu baseko zutabe batzuek big int bihurtzea falta dute. Taula handietan zutabe motak aldatzeak denbora dezente har dezakeenez ez dira automatikoki aldatu. 'Occ db: convert-filecache-bigint' exekutatuz zain dauden aldaketak eskuz aplika litezke. Eragiketa hau instantzia lineaz kanpo dagoen bitartean egin behar da. Xehetasun gehiagorako, irakurri {linkstart} honi buruzko dokumentazio orria ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite datu-basea erabiltzen ari zara. Instalazio handiagoetarako beste datu-base sistema bat erabiltzea gomendatzen da.", diff --git a/core/l10n/eu.json b/core/l10n/eu.json index 780993ab4fe..cbd14c0f05d 100644 --- a/core/l10n/eu.json +++ b/core/l10n/eu.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Instantzia honek gomendatutako PHP modulu batzuk falta ditu. Biziki gomendatzen da horiek instalatzea, errendimendua eta bateragarritasuna hobetzeko.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "\"Imagick\" PHP modulua ez dago gaituta, gaikako aplikazioa badago ere. Faviconen sorrerak behar bezala funtziona dezan, modulu hau instalatu eta gaitu behar duzu.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "\"gmp\" eta/edo \"bcmath\" PHP moduluak ez daude gaituta. WebAuthn pasahitz gabeko autentifikazioa erabiltzen baduzu, modulu hauek beharrezkoak dira.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Badirudi 32bit-eko PHP bertsioa exekutatzen ari zarela. Nextcloudek 64bit behar ditu ondo funtzionatzeko. Eguneratu zure SE eta PHP 64bit-etara! Xehetasun gehiagorako irakurri {linkstart}honi buruzko dokumentazioa ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Module php-imagick-ek ez du SVG onartzen instantzia honetan. Bateragarritasuna hobetzeko instalatzea gomendatzen da.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Datu baseko zutabe batzuek big int bihurtzea falta dute. Taula handietan zutabe motak aldatzeak denbora dezente har dezakeenez ez dira automatikoki aldatu. 'Occ db: convert-filecache-bigint' exekutatuz zain dauden aldaketak eskuz aplika litezke. Eragiketa hau instantzia lineaz kanpo dagoen bitartean egin behar da. Xehetasun gehiagorako, irakurri {linkstart} honi buruzko dokumentazio orria ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite datu-basea erabiltzen ari zara. Instalazio handiagoetarako beste datu-base sistema bat erabiltzea gomendatzen da.", diff --git a/core/l10n/pl.js b/core/l10n/pl.js index 2e16e56cb6a..65b7a57fdb6 100644 --- a/core/l10n/pl.js +++ b/core/l10n/pl.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "W tej instancji brakuje niektórych zalecanych modułów PHP. W celu zwiększenia wydajności i lepszej kompatybilności zaleca się ich instalację.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Moduł PHP \"imagick\" nie jest włączony, pomimo że aplikacja motywu jest. Aby generowanie favicon działało poprawnie, musisz zainstalować i włączyć ten moduł.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Moduły PHP \"gmp\" i/lub \"bcmath\" nie są włączone. Jeśli używasz uwierzytelniania WebAuthn bez hasła, te moduły są wymagane.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Wygląda na to, że korzystasz z 32-bitowej wersji PHP. Nextcloud do poprawnego działania potrzebuje 64-bitowej. Zaktualizuj swój system operacyjny i PHP do wersji 64-bitowej! Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Moduł php-imagick w tej instancji nie obsługuje formatu SVG. Aby uzyskać lepszą kompatybilność, zaleca się jego zainstalowanie.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Niektóre kolumny w bazie danych nie zawierają konwersji do big integers. Ze względu na to, że zmiana typów kolumn w dużych tabelach może zająć dużo czasu, nie zostały one zmienione automatycznie. Oczekujące zmiany można wykonać ręcznie, uruchamiając \"occ db:convert-filecache-bigint\". Ta operacja musi zostać wykonana, gdy instancja jest w trybie offline. Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite jest aktualnie używany jako baza danych. Dla większych instalacji zalecamy przełączenie na inną bazę danych.", diff --git a/core/l10n/pl.json b/core/l10n/pl.json index 3c8bb3bd4cd..409fb59b7d6 100644 --- a/core/l10n/pl.json +++ b/core/l10n/pl.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "W tej instancji brakuje niektórych zalecanych modułów PHP. W celu zwiększenia wydajności i lepszej kompatybilności zaleca się ich instalację.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Moduł PHP \"imagick\" nie jest włączony, pomimo że aplikacja motywu jest. Aby generowanie favicon działało poprawnie, musisz zainstalować i włączyć ten moduł.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Moduły PHP \"gmp\" i/lub \"bcmath\" nie są włączone. Jeśli używasz uwierzytelniania WebAuthn bez hasła, te moduły są wymagane.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Wygląda na to, że korzystasz z 32-bitowej wersji PHP. Nextcloud do poprawnego działania potrzebuje 64-bitowej. Zaktualizuj swój system operacyjny i PHP do wersji 64-bitowej! Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Moduł php-imagick w tej instancji nie obsługuje formatu SVG. Aby uzyskać lepszą kompatybilność, zaleca się jego zainstalowanie.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Niektóre kolumny w bazie danych nie zawierają konwersji do big integers. Ze względu na to, że zmiana typów kolumn w dużych tabelach może zająć dużo czasu, nie zostały one zmienione automatycznie. Oczekujące zmiany można wykonać ręcznie, uruchamiając \"occ db:convert-filecache-bigint\". Ta operacja musi zostać wykonana, gdy instancja jest w trybie offline. Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite jest aktualnie używany jako baza danych. Dla większych instalacji zalecamy przełączenie na inną bazę danych.", diff --git a/core/l10n/pt_BR.js b/core/l10n/pt_BR.js index 5dd5b186adf..94aa1acfce4 100644 --- a/core/l10n/pt_BR.js +++ b/core/l10n/pt_BR.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Nesta instalação estão faltando alguns módulos PHP recomendados. Para melhor desempenho e compatibilidade, é altamente recomendável instalá-los.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "O módulo PHP \"imagick\" não está habilitado, embora o aplicativo de temas esteja. Para que a geração de favicon funcione corretamente, você precisa instalar e habilitar este módulo.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Os módulos PHP \"gmp\" e/ou \"bcmath\" não estão habilitados. Se você usar a autenticação sem senha do WebAuthn, esses módulos serão necessários.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Parece que você está executando uma versão PHP de 32 bits. Nextcloud precisa de 64 bits para funcionar bem. Por favor, atualize seu sistema operacional e PHP para 64 bits! Para mais detalhes, leia {linkstart}a página de documentação sobre isso ↗ {linked}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "A extensão php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-la.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas no banco de dados não têm uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, eles não foram alterados automaticamente. Ao executar \"occ db:convert-filecache-bigint\", essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância estiver offline. Para mais detalhes, leia {linkstart}a página de documentação sobre este ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Atualmente, o SQLite está sendo usado como plataforma de banco de dados. Para instalações maiores, recomendamos que migre para outra.", diff --git a/core/l10n/pt_BR.json b/core/l10n/pt_BR.json index 77122ed39dc..a89360c2575 100644 --- a/core/l10n/pt_BR.json +++ b/core/l10n/pt_BR.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Nesta instalação estão faltando alguns módulos PHP recomendados. Para melhor desempenho e compatibilidade, é altamente recomendável instalá-los.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "O módulo PHP \"imagick\" não está habilitado, embora o aplicativo de temas esteja. Para que a geração de favicon funcione corretamente, você precisa instalar e habilitar este módulo.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "Os módulos PHP \"gmp\" e/ou \"bcmath\" não estão habilitados. Se você usar a autenticação sem senha do WebAuthn, esses módulos serão necessários.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "Parece que você está executando uma versão PHP de 32 bits. Nextcloud precisa de 64 bits para funcionar bem. Por favor, atualize seu sistema operacional e PHP para 64 bits! Para mais detalhes, leia {linkstart}a página de documentação sobre isso ↗ {linked}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "A extensão php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-la.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas no banco de dados não têm uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, eles não foram alterados automaticamente. Ao executar \"occ db:convert-filecache-bigint\", essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância estiver offline. Para mais detalhes, leia {linkstart}a página de documentação sobre este ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Atualmente, o SQLite está sendo usado como plataforma de banco de dados. Para instalações maiores, recomendamos que migre para outra.", diff --git a/core/l10n/tr.js b/core/l10n/tr.js index cdc66762ebd..d35c8b62e96 100644 --- a/core/l10n/tr.js +++ b/core/l10n/tr.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Bu kopyada önerilen bazı PHP modülleri eksik. Daha iyi başarım ve uyumluluk için bu modüllerin kurulması önemle önerilir.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Tema uygulamasında olmasına rağmen \"imagick\" PHP modülü etkinleştirilmemiş. Favicon oluşturma işleminin doğru çalışması için bu modülü kurmanız ve etkinleştirmeniz gerekir.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "\"gmp\" ve/veya \"bcmath\" PHP modülleri etkinleştirilmemiş. WebAuthn parolasız kimlik doğrulaması kullanıyorsanız, bu modüller gereklidir.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "32 bit bir PHP sürümü çalıştırıyorsunuz gibi görünüyor. Nextcloud uygulamasının iyi çalışması için 64 bit bir PHP sürümü kullanılmalıdır. Lütfen işletim sisteminizi ve PHP sürümünüzü 64bit olacak şekilde yükseltin! Ayrıntılı bilgi almak için {linkstart}ilgili sayfaya bakabilirsiniz ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Bu kopyadaki php-imagick modülünde SVG desteği yok. Daha iyi başarım ve uyumluluk için bu modülün kurulması önemle önerilir.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Veritabanında büyük tamsayıya dönüştürülecek bazı sütunlar eksik. Sütun türlerini büyük tablolara dönüştürme işlemi uzun sürebileceğinden bu işlem otomatik olarak yapılmaz. Sunucunuz normal çalışırken bekleyen değişiklikleri el ile uygulamak için \"occ db:convert-filecache-bigint\" komutunu yürütün. Bu işlem yapılırken Nextcloud kopyası çevrimdışı olur. Ayrıntılı bilgi almak için {linkstart}belgeler ↗{linkend} bölümüne bakabilirsiniz.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Şu anda veritabanı olarak SQLite kullanılıyor. Daha büyük kurulumlar için farklı bir veritabanı arka ucuna geçmenizi öneriyoruz.", diff --git a/core/l10n/tr.json b/core/l10n/tr.json index 5834351b437..fe67964f037 100644 --- a/core/l10n/tr.json +++ b/core/l10n/tr.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Bu kopyada önerilen bazı PHP modülleri eksik. Daha iyi başarım ve uyumluluk için bu modüllerin kurulması önemle önerilir.", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "Tema uygulamasında olmasına rağmen \"imagick\" PHP modülü etkinleştirilmemiş. Favicon oluşturma işleminin doğru çalışması için bu modülü kurmanız ve etkinleştirmeniz gerekir.", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "\"gmp\" ve/veya \"bcmath\" PHP modülleri etkinleştirilmemiş. WebAuthn parolasız kimlik doğrulaması kullanıyorsanız, bu modüller gereklidir.", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "32 bit bir PHP sürümü çalıştırıyorsunuz gibi görünüyor. Nextcloud uygulamasının iyi çalışması için 64 bit bir PHP sürümü kullanılmalıdır. Lütfen işletim sisteminizi ve PHP sürümünüzü 64bit olacak şekilde yükseltin! Ayrıntılı bilgi almak için {linkstart}ilgili sayfaya bakabilirsiniz ↗{linkend}.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Bu kopyadaki php-imagick modülünde SVG desteği yok. Daha iyi başarım ve uyumluluk için bu modülün kurulması önemle önerilir.", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Veritabanında büyük tamsayıya dönüştürülecek bazı sütunlar eksik. Sütun türlerini büyük tablolara dönüştürme işlemi uzun sürebileceğinden bu işlem otomatik olarak yapılmaz. Sunucunuz normal çalışırken bekleyen değişiklikleri el ile uygulamak için \"occ db:convert-filecache-bigint\" komutunu yürütün. Bu işlem yapılırken Nextcloud kopyası çevrimdışı olur. Ayrıntılı bilgi almak için {linkstart}belgeler ↗{linkend} bölümüne bakabilirsiniz.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Şu anda veritabanı olarak SQLite kullanılıyor. Daha büyük kurulumlar için farklı bir veritabanı arka ucuna geçmenizi öneriyoruz.", diff --git a/core/l10n/zh_HK.js b/core/l10n/zh_HK.js index 08ad632165a..12d75703477 100644 --- a/core/l10n/zh_HK.js +++ b/core/l10n/zh_HK.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "您的 Nextcloud 缺少了某些建議的 PHP 模組。為了提升效能與相容性，強烈建議您安裝這些 PHP 模組。", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "雖然已啟用佈景主題應用程式，但並未啟用 PHP 模組「imagick」。為了讓 favicon 產生流程正常運作，您必須安裝並啟用此模組。", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "未啟用 PHP 模組「gmp」與「bcmath」。若您要使用 WebAuthn 免密碼驗證，這些模組就是必要的。", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "您好像正在運行 32 位 PHP 版本。Nextcloud 需要 64 位才能運行良好。請將您的操作系統和 PHP 升級到 64 位！有關更多詳細信息，請閱讀 {linkstart} 有關的說明書頁面 ↗{linkend}。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "本系統安裝的 php-imagick 不支援 SVG，為了更好的相容性，建議安裝它。", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "數據庫中的某些列缺少對 big int 的轉換。由於更改大表上的列類型可能需要一些時間，因此無法自動更改它們。通過運行 “occ db：convert-filecache-bigint”，可以手動應用這些未決的更改。實例處於脫機狀態時需要執行此操作。有關更多詳細信息，請{linklink}關於此↗{linkend}的文檔頁面。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端數據庫使用 SQLite，在大型服務當中，我們建議您使用其他的數據庫後端。", diff --git a/core/l10n/zh_HK.json b/core/l10n/zh_HK.json index 56e9319e7f7..5f6ab6e70ab 100644 --- a/core/l10n/zh_HK.json +++ b/core/l10n/zh_HK.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "您的 Nextcloud 缺少了某些建議的 PHP 模組。為了提升效能與相容性，強烈建議您安裝這些 PHP 模組。", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "雖然已啟用佈景主題應用程式，但並未啟用 PHP 模組「imagick」。為了讓 favicon 產生流程正常運作，您必須安裝並啟用此模組。", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "未啟用 PHP 模組「gmp」與「bcmath」。若您要使用 WebAuthn 免密碼驗證，這些模組就是必要的。", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "您好像正在運行 32 位 PHP 版本。Nextcloud 需要 64 位才能運行良好。請將您的操作系統和 PHP 升級到 64 位！有關更多詳細信息，請閱讀 {linkstart} 有關的說明書頁面 ↗{linkend}。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "本系統安裝的 php-imagick 不支援 SVG，為了更好的相容性，建議安裝它。", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "數據庫中的某些列缺少對 big int 的轉換。由於更改大表上的列類型可能需要一些時間，因此無法自動更改它們。通過運行 “occ db：convert-filecache-bigint”，可以手動應用這些未決的更改。實例處於脫機狀態時需要執行此操作。有關更多詳細信息，請{linklink}關於此↗{linkend}的文檔頁面。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端數據庫使用 SQLite，在大型服務當中，我們建議您使用其他的數據庫後端。", diff --git a/core/l10n/zh_TW.js b/core/l10n/zh_TW.js index 3aee0d6d916..bae6b3d3186 100644 --- a/core/l10n/zh_TW.js +++ b/core/l10n/zh_TW.js @@ -99,6 +99,7 @@ OC.L10N.register( "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "您的 Nextcloud 缺少了某些建議的 PHP 模組。為了提升效能與相容性，強烈建議您安裝這些 PHP 模組。", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "雖然已啟用佈景主題應用程式，但並未啟用 PHP 模組「imagick」。為了讓 favicon 產生流程正常運作，您必須安裝並啟用此模組。", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "未啟用 PHP 模組「gmp」與「bcmath」。若您要使用 WebAuthn 免密碼驗證，這些模組就是必要的。", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "您似乎正在執行 32 位元版本的 PHP。Nextcloud 需要 64 位元才能運作良好。請將您的作業系統與 PHP 升級至 64 位元！要取得更多詳細資訊，請閱讀{linkstart}關於此問題的文件 ↗{linkend}。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "系統安裝的 php-imagick 不支援 SVG，為了更好的相容性，建議安裝它。", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "資料庫的有些欄位缺少 big int 格式轉換。因為欄位格式轉換需要一些時間，所以沒有自動轉換。您可以執行 \"occ db:convert-filecache-bigint\" 手動完成轉換，轉換時 Nextcloud 服務必須處於離線狀態。詳情請參閱{linkstart}關於這個問題的文件頁面 ↗{linkend}。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端資料庫使用 SQLite，在大型服務當中，我們建議您使用其他的資料庫後端。", diff --git a/core/l10n/zh_TW.json b/core/l10n/zh_TW.json index a6775ce717e..983084f6287 100644 --- a/core/l10n/zh_TW.json +++ b/core/l10n/zh_TW.json @@ -97,6 +97,7 @@ "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "您的 Nextcloud 缺少了某些建議的 PHP 模組。為了提升效能與相容性，強烈建議您安裝這些 PHP 模組。", "The PHP module \"imagick\" is not enabled although the theming app is. For favicon generation to work correctly, you need to install and enable this module." : "雖然已啟用佈景主題應用程式，但並未啟用 PHP 模組「imagick」。為了讓 favicon 產生流程正常運作，您必須安裝並啟用此模組。", "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "未啟用 PHP 模組「gmp」與「bcmath」。若您要使用 WebAuthn 免密碼驗證，這些模組就是必要的。", + "It seems like you are running a 32bit PHP version. Nextcloud needs 64bit to run well. Please upgrade your OS and PHP to 64bit! For further details read {linkstart}the documentation page about this ↗{linkend}." : "您似乎正在執行 32 位元版本的 PHP。Nextcloud 需要 64 位元才能運作良好。請將您的作業系統與 PHP 升級至 64 位元！要取得更多詳細資訊，請閱讀{linkstart}關於此問題的文件 ↗{linkend}。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "系統安裝的 php-imagick 不支援 SVG，為了更好的相容性，建議安裝它。", "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running \"occ db:convert-filecache-bigint\" those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "資料庫的有些欄位缺少 big int 格式轉換。因為欄位格式轉換需要一些時間，所以沒有自動轉換。您可以執行 \"occ db:convert-filecache-bigint\" 手動完成轉換，轉換時 Nextcloud 服務必須處於離線狀態。詳情請參閱{linkstart}關於這個問題的文件頁面 ↗{linkend}。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端資料庫使用 SQLite，在大型服務當中，我們建議您使用其他的資料庫後端。", |