diff options
Diffstat (limited to 'core')
-rw-r--r-- | core/l10n/cs.js | 3 | ||||
-rw-r--r-- | core/l10n/cs.json | 3 | ||||
-rw-r--r-- | core/l10n/gl.js | 20 | ||||
-rw-r--r-- | core/l10n/gl.json | 20 | ||||
-rw-r--r-- | core/l10n/lo.js | 38 | ||||
-rw-r--r-- | core/l10n/lo.json | 38 | ||||
-rw-r--r-- | core/l10n/nl.js | 20 | ||||
-rw-r--r-- | core/l10n/nl.json | 20 | ||||
-rw-r--r-- | core/l10n/pl.js | 20 | ||||
-rw-r--r-- | core/l10n/pl.json | 20 | ||||
-rw-r--r-- | core/l10n/pt_BR.js | 22 | ||||
-rw-r--r-- | core/l10n/pt_BR.json | 22 | ||||
-rw-r--r-- | core/l10n/zh_CN.js | 20 | ||||
-rw-r--r-- | core/l10n/zh_CN.json | 20 | ||||
-rw-r--r-- | core/l10n/zh_HK.js | 3 | ||||
-rw-r--r-- | core/l10n/zh_HK.json | 3 | ||||
-rw-r--r-- | core/l10n/zh_TW.js | 20 | ||||
-rw-r--r-- | core/l10n/zh_TW.json | 20 |
18 files changed, 312 insertions, 20 deletions
diff --git a/core/l10n/cs.js b/core/l10n/cs.js index 17af6bd5cc5..f6423b30000 100644 --- a/core/l10n/cs.js +++ b/core/l10n/cs.js @@ -61,6 +61,8 @@ OC.L10N.register( "The following apps have been disabled: %s" : "Následující aplikace byly vypnuty: %s", "Already up to date" : "Už je aktuální", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Váš webový server ještě není správně nastaven, pro umožnění synchronizace souborů, rozhraní WebDAV pravděpodobně není funkční.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Tento webový server není správně nastaven pro rozpoznání \"{url}\". Více informací lze nalézt v {linkstart}dokumentaci ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Tento webový server není správně nastaven pro rozpoznání \"{url}\". To nejspíše souvisí s nastavením webového serveru, které nebylo upraveno tak, aby jej dovedlo přímo do této složky. Porovnejte svou konfiguraci s dodávanými rewrite pravidly v \".htaccess\" pro Apache nebo těm poskytnutým v dokumentaci pro Nginx na této {linkstart}stránce s dokumentací ↗{linkend}. U Nginx jsou to obvykle řádky začínající na \"location ~\", které potřebují úpravu.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Zdá se, že PHP není správně nastaveno pro dotazování proměnných prostředí systému. Test s příkazem getenv(\"PATH\") vrátí pouze prázdnou odpověď.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Nastavení bylo přepnuto do režimu pouze pro čtení. To brání změnám prostřednictvím webového rozhraní. Dále při každé aktualizaci, je třeba soubor ručně zpřístupnit pro zápis.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Vaše databáze není spuštěná s úrovní izolace transakcí „READ COMMITTED“. Toto může způsobit problémy při paralelním spouštění více akcí současně.", @@ -86,6 +88,7 @@ OC.L10N.register( "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Složky některých aplikací jsou vlastněny jiným uživatelem, než je ten webového serveru. To může být případ pokud aplikace byly nainstalované ručně. Zkontrolujte oprávnění následujících složek aplikací:", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Tato instance používá jako hlavní úložiště objektové úložiště, založené na protokolu S3. Nahrané soubory jsou dočasně ukládány na server a proto je doporučeno mít 50 GB volného prostoru v adresáři temp pro PHP. Podrobnosti o umístění a prostoru, který je k dispozici naleznete v záznamu událostí. Pro navýšení kapacit nasměrujte v php.ini na jiný adresář nebo zvyšte kapacitu stávajícího umístění.", "Error occurred while checking server setup" : "Při ověřování nastavení serveru došlo k chybě", + "For more details see the {linkstart}documentation ↗{linkend}." : "Pro více podrobností se koukněte do {linkstart}dokumentace ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Váš adresář data a vaše soubory jsou pravděpodobně dostupné z Internetu. Soubor .htaccess nefunguje. Je velmi doporučeno zajistit, aby tento adresář již nebyl dostupný z internetu, nebo byl přesunut mimo document root webového serveru.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "HTTP hlavička „{header}“ není nastavena ve shodě s „{expected}“. To značí možné ohrožení bezpečnosti a soukromí a je doporučeno toto nastavení upravit.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "HTTP hlavička „{header}“ není nastavena ve shodě s „{expected}“. To značí možné ohrožení bezpečnosti a soukromí a je doporučeno toto nastavení upravit.", diff --git a/core/l10n/cs.json b/core/l10n/cs.json index 42d5465c652..c40361be3ee 100644 --- a/core/l10n/cs.json +++ b/core/l10n/cs.json @@ -59,6 +59,8 @@ "The following apps have been disabled: %s" : "Následující aplikace byly vypnuty: %s", "Already up to date" : "Už je aktuální", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Váš webový server ještě není správně nastaven, pro umožnění synchronizace souborů, rozhraní WebDAV pravděpodobně není funkční.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Tento webový server není správně nastaven pro rozpoznání \"{url}\". Více informací lze nalézt v {linkstart}dokumentaci ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Tento webový server není správně nastaven pro rozpoznání \"{url}\". To nejspíše souvisí s nastavením webového serveru, které nebylo upraveno tak, aby jej dovedlo přímo do této složky. Porovnejte svou konfiguraci s dodávanými rewrite pravidly v \".htaccess\" pro Apache nebo těm poskytnutým v dokumentaci pro Nginx na této {linkstart}stránce s dokumentací ↗{linkend}. U Nginx jsou to obvykle řádky začínající na \"location ~\", které potřebují úpravu.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Zdá se, že PHP není správně nastaveno pro dotazování proměnných prostředí systému. Test s příkazem getenv(\"PATH\") vrátí pouze prázdnou odpověď.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Nastavení bylo přepnuto do režimu pouze pro čtení. To brání změnám prostřednictvím webového rozhraní. Dále při každé aktualizaci, je třeba soubor ručně zpřístupnit pro zápis.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Vaše databáze není spuštěná s úrovní izolace transakcí „READ COMMITTED“. Toto může způsobit problémy při paralelním spouštění více akcí současně.", @@ -84,6 +86,7 @@ "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Složky některých aplikací jsou vlastněny jiným uživatelem, než je ten webového serveru. To může být případ pokud aplikace byly nainstalované ručně. Zkontrolujte oprávnění následujících složek aplikací:", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Tato instance používá jako hlavní úložiště objektové úložiště, založené na protokolu S3. Nahrané soubory jsou dočasně ukládány na server a proto je doporučeno mít 50 GB volného prostoru v adresáři temp pro PHP. Podrobnosti o umístění a prostoru, který je k dispozici naleznete v záznamu událostí. Pro navýšení kapacit nasměrujte v php.ini na jiný adresář nebo zvyšte kapacitu stávajícího umístění.", "Error occurred while checking server setup" : "Při ověřování nastavení serveru došlo k chybě", + "For more details see the {linkstart}documentation ↗{linkend}." : "Pro více podrobností se koukněte do {linkstart}dokumentace ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Váš adresář data a vaše soubory jsou pravděpodobně dostupné z Internetu. Soubor .htaccess nefunguje. Je velmi doporučeno zajistit, aby tento adresář již nebyl dostupný z internetu, nebo byl přesunut mimo document root webového serveru.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "HTTP hlavička „{header}“ není nastavena ve shodě s „{expected}“. To značí možné ohrožení bezpečnosti a soukromí a je doporučeno toto nastavení upravit.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "HTTP hlavička „{header}“ není nastavena ve shodě s „{expected}“. To značí možné ohrožení bezpečnosti a soukromí a je doporučeno toto nastavení upravit.", diff --git a/core/l10n/gl.js b/core/l10n/gl.js index 0228f0a0e81..d52403f4af6 100644 --- a/core/l10n/gl.js +++ b/core/l10n/gl.js @@ -61,15 +61,27 @@ OC.L10N.register( "The following apps have been disabled: %s" : "As seguintes aplicacións foron desactivadas: %s", "Already up to date" : "Xa está actualizado", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "O servidor aínda non está configurado correctamente para permitir a sincronización de ficheiros, semella que a interface WebDAV non está a funcionar.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "O servidor non está configurado correctamente para resolver «{url}». Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "O servidor web non está configurado correctamente para resolver «{url}». O máis probábel é que isto estea relacionado cunha configuración do servidor web que non se actualizou para entregar directamente este cartafol. Compare a configuración contra as regras de reescritura enviadas en «.htaccess» para Apache ou a fornecida na documentación de Nginx na súa {linkstart}páxina de documentación ↗{linkend}. En Nginx estas normalmente son as liñas que comezan por «location ~» que precisan unha actualización.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "O servidor web non está configurado correctamente para fornecer ficheiros .woff2. Isto é un incidente frecuente en configuracións de Nginx. Para Nextcloud 15 necesita un axuste para fornecer ficheiros .woff2. Compare a súa configuración do Nginx coa configuración recomendada na nosa {linkstart}documentación ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Semella que PHP non está configurado correctamente para consultar as variábeis de contorno do sistema. A proba con getenv(\"PATH\") só devolve unha resposta baleira.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Revise a {linkstart}documentación de instalación ↗{linkend} para as notas de configuración de PHP e a configuración do PHP no seu servidor, especialmente cando se está a empregar php-fpm", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Foi activada a restrición da configuración a só lectura. Isto impide o estabelecemento dalgunhas configuracións a través da interface web. Ademais, ten que facer escribíbel manualmente o ficheiro para cada actualización.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "A súa base de datos non se executa co nivel de illamento de transacción «READ COMMITTED» . Isto pode causar problemas cando se executan múltiples accións en paralelo.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Non se atopou o módulo de PHP «fileinfo». É recomendase encarecidamente activar este módulo para obter os mellores resultados coa detección do tipo MIME.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "O bloqueo de ficheiros transaccionais está desactivado, isto podería levar a problemas baixo certas condicións. Active «'filelocking.enabled» en «config.php» para evitar eses problemas. Vexa a {linkstart}documentación ↗{linkend} para obter máis información.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Se a instalación no está feita na raíz do dominio e usa o sistema cron, pode haber incidencias coa xeración de URL. Para evitar estes problemas, axuste a opción «overwrite.cli.url» no seu ficheiro «config.php» á ruta webroot da instalación (suxestión: \"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "A súa instalación non ten definida a rexión telefónica predeterminada. Isto é necesario para validar os números de teléfono na configuración do perfil sen un código de país. Para permitir números sen código de país, engada «default_phone_region» co respectivo {linkstart}código ISO 3166-1 ↗{linkend} da rexión ao seu ficheiro de configuración.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Non foi posíbel executar a tarefa de cron programada mediante a liña de ordes. Atopáronse os seguintes erros técnicos: ", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Este servidor non ten conexión activa a Internet. Non foi posíbel estabelecer varias conexións. Isto significa que algunhas características como a montaxe do almacenamento externo, as notificacións sobre actualizacións ou a instalación de engadidos de terceiros non funcionarán. Así mesmo, o acceso remoto a ficheiros e enviar correos de notificación poderían non funcionar. Estabeleza unha conexión do servidor a Internet para gozar todas as características.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A memoria caché non foi configurada. Para mellorar o rendemento, configure unha «memcache» se está dispoñíbel. Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP non atopa unha fonte de aleatoriedade, isto está moi desaconsellado por razóns de seguridade. Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Actualmente está a empregar PHP {version}. Anove a versión de PHP para beneficiarse das {linkstart}melloras de rendemento e seguridade que aporta PHP Group ↗{linkend} tan cedo como a súa distribución o admita. ", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 é a última versión que admite PHP 7.2. Nextcloud 21 require polo menos PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A configuración de cabeceiras do proxy inverso é incorrecta, ou vostede está accedendo a Nextcloud dende un proxy no que confía. Se non, isto é un incidente de seguridade que pode permitir a un atacante disfrazar o seu enderezo IP como visíbel para Nextcloud. Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como caché distribuído, pero está instalado o módulo PHP incorrecto «memcache». \\OC\\Memcache\\Memcached só admite «memcached» e non «memcache». Consulte a {linkstart}wiki de memcached sobre os dous módulos ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Algúns ficheiros non superaron a comprobación de integridade. Pode atopar máis información sobre como resolver este problema na nosa {linkstart1}documentación ↗{linkend}. ({linkstart2}Lista de ficheiros incorrectos…{linkend} / {linkstart3}Volver analizar…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "OPcache de PHP non está configurado correctamente. {linkstart}Para mellorar o rendemento recomendamoslle ↗{linkend} cargalo na súa instalación de PHP.", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "A función PHP «set_limit_time» non está dispoñíbel. Isto podería facer que o script fose rematado na metade da execución, quebrando a instalación. Recomendámoslle encarecidamente que active esta función.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "O seu PHP non é compatíbel con FreeType, o que supón a quebra das imaxes do perfil e a interface dos axustes.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Falta o índice «{indexName}» na táboa «{tableName}».", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Á base de datos fáltanlle algunhas columnas opcionais. Por moe de que engadir columnas a grandes táboas podería levar moito tempo non foron engadidas automaticamente cando poden ser opcionais. Estas columnas poden engadirse manualmente mentres siga funcionando a instancia, executando «occ db:add-missing-columns». Unha vez se teñan engadidas as columnas, algunhas características poden mellorar a resposta ou a usabilidade.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "A esta instancia fáltanlle algúns módulos PHP recomendados. Para mellorar o rendemento e aumentar a compatibilidade, recomendase encarecidamente instalalos.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "O módulo php-imagick nesta instancia non ten soporte SVG. Para unha mellor compatibilidade recoméndase instalalo.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "A algunhas columnas fáltalles a conversión a enteiro grande. Por mor de que cambiar os tipos de columnas en táboas grandes podería levar moito tempo non se modificaron automaticamente. Pódense aplicar manualmente estes cambios pendentes executando «occ db:convert-filecache-bigint'». Esta operación ten que ser feita mentres a instancia está sen conexión. Para obter máis información, lea {linkstart}a páxina de documentación sobre isto ↗{linkend}", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente empregase SQLite como infraestrutura da base de datos. Para instalacións máis grandes recomendámoslle que cambie a unha infraestrutura de base de datos diferente.", "This is particularly recommended when using the desktop client for file synchronisation." : "Isto está especialmente recomendado cando se utiliza o cliente de escritorio para a sincronización de ficheiros.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Para migrar a outra base de datos use a ferramenta de liña de ordes «occ db:convert-type» ou vexa a {linkstart}documentación ↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "O límite de memoria de PHP está por baixo do valor recomendado de 512 MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Algúns directorios de aplicacións son propiedade dun usuario diferente do usuario do servidor web. Este pode ser o caso se se instalaron aplicacións manualmente. Comprobe os permisos dos seguintes directorios de aplicacións:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Empregase MySQL como base de datos mais non admite caracteres de 4 bytes. Para poder manexar caracteres de 4 bytes (coma «emojis») sen problemas nos nomes de ficheiro ou comentarios por exemplo, recoméndase activar a compatibilidade de 4 bytes en MySQL. Para obter máis información, lea {linkstart}a páxina de documentación sobre isto ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Esta instancia emprega un almacén de obxectos baseada en S3 como almacenamento primario. Os ficheiros enviados almacénanse temporalmente no servidor e, polo tanto, recoméndase dispor de 50 GB de espazo libre no directorio temporal de PHP. Comprobe os rexistros para obter máis detalles sobre a ruta e o espazo dispoñíbel. Para mellorar isto, cambie o directorio temporal no php.ini ou habilite máis espazo dispoñíbel nesta ruta.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Está a acceder á súa instancia a través dunha conexión segura, porén a súa instancia está a xerar URL inseguros. Isto probabelmente significa que está detrás dun proxy inverso e que as variábeis de configuración de sobrescritura non están configuradas correctamente. Lea a {linkstart}páxina de documentación sobre isto ↗{linkend}.", "Error occurred while checking server setup" : "Aconteceu un erro mentras se comprobaba a configuración do servidor", + "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter máis detalles revise a {linkstart}documentación ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "O directorio de datos e os seus ficheiros probabelmente son accesíbeis dende a Internet. O ficheiro .htaccess non funciona. Recoméndase encarecidamente configurar o seu servidor web para que o directorio de datos deixe de ser accesíbel ou que mova o directorio de datos fora da raíz do documento do servidor web.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "A cabeceira HTTP «{header}» non está definida como «{expected}». Este é un risco de seguridade ou privacidade potencial, xa que se recomenda axustar esta opción en consecuencia.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "A cabeceira HTTP «{header}» non está definida como «{expected}». É posíbel que algunhas funcións non traballen correctamente, xa que se recomenda axustar esta opción en consecuencia.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "A cabeceira HTTP «{header}» non contén «{expected}». Este é un risco de seguridade ou privacidade potencial, xa que se recomenda axustar esta opción en consecuencia.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "A cabeceira HTTP «{header}» non está configurada como «{val1}», «{val2}», «{val3}», «{val4}» ou «{val5}». Isto pode filtrar información de referencia. Vexa a {linkstart}recomendación do W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "A cabeceira HTTP «Strict-Transport-Security» non está configurada a polo menos «{seconds}» segundos. Para mellorar a seguridade recomendámoslle activar HSTS tal e como se describe nos {linkstart}consellos de seguridade ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Estase accedendo ao sitio de forma insegura mediante HTTP. Recoméndase encarecidamente configurar o servidor para que requira HTTPS, tal e como se describe nos {linkstart}consellos de seguridade ↗{linkend}.", "unknown text" : "texto descoñecido", "Hello world!" : "Ola xente!", "sunny" : "soleado", diff --git a/core/l10n/gl.json b/core/l10n/gl.json index 4bc59fab09e..4efffa492b2 100644 --- a/core/l10n/gl.json +++ b/core/l10n/gl.json @@ -59,15 +59,27 @@ "The following apps have been disabled: %s" : "As seguintes aplicacións foron desactivadas: %s", "Already up to date" : "Xa está actualizado", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "O servidor aínda non está configurado correctamente para permitir a sincronización de ficheiros, semella que a interface WebDAV non está a funcionar.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "O servidor non está configurado correctamente para resolver «{url}». Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "O servidor web non está configurado correctamente para resolver «{url}». O máis probábel é que isto estea relacionado cunha configuración do servidor web que non se actualizou para entregar directamente este cartafol. Compare a configuración contra as regras de reescritura enviadas en «.htaccess» para Apache ou a fornecida na documentación de Nginx na súa {linkstart}páxina de documentación ↗{linkend}. En Nginx estas normalmente son as liñas que comezan por «location ~» que precisan unha actualización.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "O servidor web non está configurado correctamente para fornecer ficheiros .woff2. Isto é un incidente frecuente en configuracións de Nginx. Para Nextcloud 15 necesita un axuste para fornecer ficheiros .woff2. Compare a súa configuración do Nginx coa configuración recomendada na nosa {linkstart}documentación ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Semella que PHP non está configurado correctamente para consultar as variábeis de contorno do sistema. A proba con getenv(\"PATH\") só devolve unha resposta baleira.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Revise a {linkstart}documentación de instalación ↗{linkend} para as notas de configuración de PHP e a configuración do PHP no seu servidor, especialmente cando se está a empregar php-fpm", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Foi activada a restrición da configuración a só lectura. Isto impide o estabelecemento dalgunhas configuracións a través da interface web. Ademais, ten que facer escribíbel manualmente o ficheiro para cada actualización.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "A súa base de datos non se executa co nivel de illamento de transacción «READ COMMITTED» . Isto pode causar problemas cando se executan múltiples accións en paralelo.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Non se atopou o módulo de PHP «fileinfo». É recomendase encarecidamente activar este módulo para obter os mellores resultados coa detección do tipo MIME.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "O bloqueo de ficheiros transaccionais está desactivado, isto podería levar a problemas baixo certas condicións. Active «'filelocking.enabled» en «config.php» para evitar eses problemas. Vexa a {linkstart}documentación ↗{linkend} para obter máis información.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Se a instalación no está feita na raíz do dominio e usa o sistema cron, pode haber incidencias coa xeración de URL. Para evitar estes problemas, axuste a opción «overwrite.cli.url» no seu ficheiro «config.php» á ruta webroot da instalación (suxestión: \"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "A súa instalación non ten definida a rexión telefónica predeterminada. Isto é necesario para validar os números de teléfono na configuración do perfil sen un código de país. Para permitir números sen código de país, engada «default_phone_region» co respectivo {linkstart}código ISO 3166-1 ↗{linkend} da rexión ao seu ficheiro de configuración.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Non foi posíbel executar a tarefa de cron programada mediante a liña de ordes. Atopáronse os seguintes erros técnicos: ", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Este servidor non ten conexión activa a Internet. Non foi posíbel estabelecer varias conexións. Isto significa que algunhas características como a montaxe do almacenamento externo, as notificacións sobre actualizacións ou a instalación de engadidos de terceiros non funcionarán. Así mesmo, o acceso remoto a ficheiros e enviar correos de notificación poderían non funcionar. Estabeleza unha conexión do servidor a Internet para gozar todas as características.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A memoria caché non foi configurada. Para mellorar o rendemento, configure unha «memcache» se está dispoñíbel. Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP non atopa unha fonte de aleatoriedade, isto está moi desaconsellado por razóns de seguridade. Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Actualmente está a empregar PHP {version}. Anove a versión de PHP para beneficiarse das {linkstart}melloras de rendemento e seguridade que aporta PHP Group ↗{linkend} tan cedo como a súa distribución o admita. ", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 é a última versión que admite PHP 7.2. Nextcloud 21 require polo menos PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A configuración de cabeceiras do proxy inverso é incorrecta, ou vostede está accedendo a Nextcloud dende un proxy no que confía. Se non, isto é un incidente de seguridade que pode permitir a un atacante disfrazar o seu enderezo IP como visíbel para Nextcloud. Pode atopar máis información na nosa {linkstart}documentación ↗{linkend}.", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como caché distribuído, pero está instalado o módulo PHP incorrecto «memcache». \\OC\\Memcache\\Memcached só admite «memcached» e non «memcache». Consulte a {linkstart}wiki de memcached sobre os dous módulos ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Algúns ficheiros non superaron a comprobación de integridade. Pode atopar máis información sobre como resolver este problema na nosa {linkstart1}documentación ↗{linkend}. ({linkstart2}Lista de ficheiros incorrectos…{linkend} / {linkstart3}Volver analizar…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "OPcache de PHP non está configurado correctamente. {linkstart}Para mellorar o rendemento recomendamoslle ↗{linkend} cargalo na súa instalación de PHP.", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "A función PHP «set_limit_time» non está dispoñíbel. Isto podería facer que o script fose rematado na metade da execución, quebrando a instalación. Recomendámoslle encarecidamente que active esta función.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "O seu PHP non é compatíbel con FreeType, o que supón a quebra das imaxes do perfil e a interface dos axustes.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Falta o índice «{indexName}» na táboa «{tableName}».", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Á base de datos fáltanlle algunhas columnas opcionais. Por moe de que engadir columnas a grandes táboas podería levar moito tempo non foron engadidas automaticamente cando poden ser opcionais. Estas columnas poden engadirse manualmente mentres siga funcionando a instancia, executando «occ db:add-missing-columns». Unha vez se teñan engadidas as columnas, algunhas características poden mellorar a resposta ou a usabilidade.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "A esta instancia fáltanlle algúns módulos PHP recomendados. Para mellorar o rendemento e aumentar a compatibilidade, recomendase encarecidamente instalalos.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "O módulo php-imagick nesta instancia non ten soporte SVG. Para unha mellor compatibilidade recoméndase instalalo.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "A algunhas columnas fáltalles a conversión a enteiro grande. Por mor de que cambiar os tipos de columnas en táboas grandes podería levar moito tempo non se modificaron automaticamente. Pódense aplicar manualmente estes cambios pendentes executando «occ db:convert-filecache-bigint'». Esta operación ten que ser feita mentres a instancia está sen conexión. Para obter máis información, lea {linkstart}a páxina de documentación sobre isto ↗{linkend}", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente empregase SQLite como infraestrutura da base de datos. Para instalacións máis grandes recomendámoslle que cambie a unha infraestrutura de base de datos diferente.", "This is particularly recommended when using the desktop client for file synchronisation." : "Isto está especialmente recomendado cando se utiliza o cliente de escritorio para a sincronización de ficheiros.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Para migrar a outra base de datos use a ferramenta de liña de ordes «occ db:convert-type» ou vexa a {linkstart}documentación ↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "O límite de memoria de PHP está por baixo do valor recomendado de 512 MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Algúns directorios de aplicacións son propiedade dun usuario diferente do usuario do servidor web. Este pode ser o caso se se instalaron aplicacións manualmente. Comprobe os permisos dos seguintes directorios de aplicacións:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Empregase MySQL como base de datos mais non admite caracteres de 4 bytes. Para poder manexar caracteres de 4 bytes (coma «emojis») sen problemas nos nomes de ficheiro ou comentarios por exemplo, recoméndase activar a compatibilidade de 4 bytes en MySQL. Para obter máis información, lea {linkstart}a páxina de documentación sobre isto ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Esta instancia emprega un almacén de obxectos baseada en S3 como almacenamento primario. Os ficheiros enviados almacénanse temporalmente no servidor e, polo tanto, recoméndase dispor de 50 GB de espazo libre no directorio temporal de PHP. Comprobe os rexistros para obter máis detalles sobre a ruta e o espazo dispoñíbel. Para mellorar isto, cambie o directorio temporal no php.ini ou habilite máis espazo dispoñíbel nesta ruta.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Está a acceder á súa instancia a través dunha conexión segura, porén a súa instancia está a xerar URL inseguros. Isto probabelmente significa que está detrás dun proxy inverso e que as variábeis de configuración de sobrescritura non están configuradas correctamente. Lea a {linkstart}páxina de documentación sobre isto ↗{linkend}.", "Error occurred while checking server setup" : "Aconteceu un erro mentras se comprobaba a configuración do servidor", + "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter máis detalles revise a {linkstart}documentación ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "O directorio de datos e os seus ficheiros probabelmente son accesíbeis dende a Internet. O ficheiro .htaccess non funciona. Recoméndase encarecidamente configurar o seu servidor web para que o directorio de datos deixe de ser accesíbel ou que mova o directorio de datos fora da raíz do documento do servidor web.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "A cabeceira HTTP «{header}» non está definida como «{expected}». Este é un risco de seguridade ou privacidade potencial, xa que se recomenda axustar esta opción en consecuencia.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "A cabeceira HTTP «{header}» non está definida como «{expected}». É posíbel que algunhas funcións non traballen correctamente, xa que se recomenda axustar esta opción en consecuencia.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "A cabeceira HTTP «{header}» non contén «{expected}». Este é un risco de seguridade ou privacidade potencial, xa que se recomenda axustar esta opción en consecuencia.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "A cabeceira HTTP «{header}» non está configurada como «{val1}», «{val2}», «{val3}», «{val4}» ou «{val5}». Isto pode filtrar información de referencia. Vexa a {linkstart}recomendación do W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "A cabeceira HTTP «Strict-Transport-Security» non está configurada a polo menos «{seconds}» segundos. Para mellorar a seguridade recomendámoslle activar HSTS tal e como se describe nos {linkstart}consellos de seguridade ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Estase accedendo ao sitio de forma insegura mediante HTTP. Recoméndase encarecidamente configurar o servidor para que requira HTTPS, tal e como se describe nos {linkstart}consellos de seguridade ↗{linkend}.", "unknown text" : "texto descoñecido", "Hello world!" : "Ola xente!", "sunny" : "soleado", diff --git a/core/l10n/lo.js b/core/l10n/lo.js index 5f1b58c327c..19c622e5dc1 100644 --- a/core/l10n/lo.js +++ b/core/l10n/lo.js @@ -4,13 +4,13 @@ OC.L10N.register( "Please select a file." : "ກະລຸນາເລືອກຟາຍ", "File is too big" : "ຟາຍໃຫຍ່ໂພດ", "The selected file is not an image." : "ຟາຍນີ້ບໍ່ແມ່ນປະເພດຮູບ", - "The selected file cannot be read." : "ຟາຍນີ້ບໍ່ສາມາດອ່ານໄດ້", + "The selected file cannot be read." : "ຟາຍທີ່ເລືອກບໍ່ສາມາດອ່ານໄດ້", "Invalid file provided" : "ຟາຍບໍ່ຖືກຕ້ອງ", "No image or file provided" : "ບໍ່ມີຮູບພາບ ຫຼື ຟາຍ", "Unknown filetype" : "ບໍ່ຮູ້ປະເພດຂອງຟາຍ", "Invalid image" : "ບໍ່ມີຮູບພາບ", "An error occurred. Please contact your admin." : "ຄັດຂ້ອງ ກະລຸນລາຕິດຕໍ່ ທີມບໍລິຫານ", - "No temporary profile picture available, try again" : "ບໍ່ມີຮູບພາບຫຼືຟາຍຊົ່ວຄາວ, ກະລຸນນາ ລອງໃໝ່", + "No temporary profile picture available, try again" : "ບໍ່ມີຮູບພາບ ຫຼື ຟາຍຊົ່ວຄາວ, ກະລຸນນາ ລອງໃໝ່", "No crop data provided" : "ບໍ່ມີຂໍ້ມູນທີຕັດຕໍ່ປ້ອນເຂົ້າ", "No valid crop data provided" : "ບໍ່ມີຂໍ້ມູນຕັດຕໍ່ທີຖືກຕ້ອງປ້ອນເຂົ້າ", "Crop is not square" : "ການຕັດຕໍ່ບໍ່ເປັນຮູບສີ່ຫຼຽມ", @@ -21,16 +21,16 @@ OC.L10N.register( "Password reset is disabled" : "ບໍ່ສາມາດປ່ຽນລະຫັດຜ່ານ", "Couldn't reset password because the token is invalid" : "ບໍ່ສາມາດປ່ຽນລະຫັດຜ່ານ ເພາະ ໂຕກເກັນ ບໍ່ຖືກຕ້ອງ", "Couldn't reset password because the token is expired" : "ບໍ່ສາມາດປ່ຽນລະຫັດຜ່ານ ເພາະ ໂຕກເກັນ ໝົດອາຍຸ", - "%s password reset" : "%s ປ່ຽນລະຫັດຜ່ານ", + "%s password reset" : " ປ່ຽນລະຫັດຜ່ານ%s", "Password reset" : "ປ່ຽນບະຫັດຜ່ານ", "Click the following button to reset your password. If you have not requested the password reset, then ignore this email." : "ກົດປຸ່ມນີ້ເພື່ອປ່ຽນລະຫັດຜ່ານ. ຖ້າຫາກທ່ານບໍ່ໄດ້ຮ້ອງຂໍການປ່ຽນລະຫັດຜ່ານ, ກະລຸນນາຍົກເລີກ ເມລນີ້. ", "Click the following link to reset your password. If you have not requested the password reset, then ignore this email." : "ກົດປຸ່ມນີ້ເພື່ອປ່ຽນລະຫັດຜ່ານ. ຖ້າຫາກທ່ານບໍ່ໄດ້ຮ້ອງຂໍການປ່ຽນລະຫັດຜ່ານ, ກະລຸນນາຍົກເລີກ ເມລນີ້. ", "Reset your password" : "່ປ່ຽນລະຫັດຜ່ານ", "Nextcloud Server" : "ເຊີບເວີ ເນັກຄຮາວ", "Some of your link shares have been removed" : "ບາງລີ້ງທີທ່ານໄດ້ແບ່ງປັນຖືກຍົກເລີກແລ້ວ", - "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "ເນື່ອງຈາກບັນຫາດ້ານຄວາມປອດໄພ, ພວກເຮົາໄດ້ຍົກເບີກການແບ່ງປັນລີ້ງ. ສໍາລັບຂໍ້ມູນເພີ່ມເຕີ່ມ ກະລຸນນາກົດເບີ່ງລີງ ", - "The user limit of this instance is reached." : "ຮອດກໍານົດຈໍາກັດຈໍານວນຜູ້ໃຊ້ແລ້ວ", - "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "ໃສ່ລະຫັດການສະໝັກ ໃຊ້ ຂອງທ່ານເພື່ອເພີ່ມຂີດຄວາມສາມາດຂອງຜູ້ໃຊ້. ສຳລັບຂໍ້ມູນເພີ່ມເຕີມກ່ຽວກັບ Nextcloud ສາມາດເບິ່ງເວັບໄຊທ໌ຂອງພວກເຮົາ.", + "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "ເນື່ອງຈາກບັນຫາດ້ານຄວາມປອດໄພ, ພວກເຮົາໄດ້ຍົກເລິກການແບ່ງປັນລີ້ງ. ສໍາລັບຂໍ້ມູນເພີ່ມເຕີ່ມ ກະລຸນນາກົດເບີ່ງລີງ ", + "The user limit of this instance is reached." : "ຮອດກໍານົດ ຈໍາກັດຈໍານວນຜູ້ໃຊ້ແລ້ວ", + "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "ໃສ່ລະຫັດຜ່ານສະໝັກ ເພື່ອເພີ່ມຂີດຄວາມສາມາດຂອງຜູ້ໃຊ້. ສຳລັບຂໍ້ມູນເພີ່ມເຕີມກ່ຽວກັບ Nextcloud ສາມາດເບິ່ງເວັບໄຊທ໌ຂອງພວກເຮົາ.", "Preparing update" : "ກະກຽມອັບເດດ", "[%d / %d]: %s" : "[%d/%d]:%s", "Repair step:" : "ຂັ້ນຕອນໃນການປັບປຸງ", @@ -44,13 +44,13 @@ OC.L10N.register( "Maintenance mode is kept active" : "ໂມດການບໍາລຸງຮັກສາໄດ້ຖືກເປີດປະໄວ້", "Updating database schema" : "ກໍາລັງອັບເດດແຜນຜັງຖານຂໍ້ມູນ", "Updated database" : "ຖານຂໍ້ມູນອັບເດດແລ້ວ", - "Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "ການກວດສອບວ່າແຜນຜັງຖານຂໍ້ມູນສາມາດອັບເດດໄດ້ຫລືບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ຂື້ນກັບຂະໜາດ ຂອງຖານຂໍ້ມູນ)", + "Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "ການກວດສອບວ່າແຜນຜັງຖານຂໍ້ມູນສາມາດອັບເດດໄດ້ ຫລື ບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ຂື້ນກັບຂະໜາດ ຂອງຖານຂໍ້ມູນ)", "Checked database schema update" : "ເລືອກແຜນຜັງຖານຂໍ້ມູນທີຈະອັບເດດ", "Checking updates of apps" : "ກໍາລັງກວດສອບການອັບເດດ ຂອງແອັບ ", "Checking for update of app \"%s\" in appstore" : "ກໍາລັງກວດສອບການເອັບເດດ ແອັບ \"%s\" ໃນແອັບສະຕໍ", "Update app \"%s\" from appstore" : "ອັບເດດ ເອັບ \"%s\" ຈາກ ແອັບສະຕໍ", "Checked for update of app \"%s\" in appstore" : "ກວດການອັບເດດ ແອັບ \"%s\" ໃນເອັບສະຕໍ", - "Checking whether the database schema for %s can be updated (this can take a long time depending on the database size)" : "ກວດເບິ່ງວ່າແຜນຜັງຖານຂໍ້ມູນ ສຳລັບ %s ສາມາດອັບເດດໄດ້ຫລືບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ອີງຕາມຂະໜາດ ຂອງຖານຂໍ້ມູນ)", + "Checking whether the database schema for %s can be updated (this can take a long time depending on the database size)" : "ກວດເບິ່ງວ່າແຜນຜັງຖານຂໍ້ມູນ ສຳລັບ %s ສາມາດອັບເດດໄດ້ ຫລື ບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ອີງຕາມຂະໜາດ ຂອງຖານຂໍ້ມູນ)", "Checked database schema update for apps" : "ກວດສອບການອັບເດດແຜນຜັງຖານຂໍ້ມູນ ສຳລັບແອັບ.", "Updated \"%1$s\" to %2$s" : "ອັບເດດ \"%1$s\" ຫາ %2$s", "Set log level to debug" : "ກໍານົດລະດັບຂອງ Log ເພື່ອແກ້ຈຸດບົກຜ່ອງ", @@ -60,16 +60,28 @@ OC.L10N.register( "%s (incompatible)" : "%s (ຂັດແຍ້ງ)", "The following apps have been disabled: %s" : "ແອັບດັ່ງກ່າວໄດ້ຖືກປີດໄວ້:%s", "Already up to date" : "ໄດ້ອັບເດດແລ້ວ", - "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "ເວັບເຊີບເວີ ຂອງທ່ານຍັງບໍ່ຖືກຕັ້ງຄ່າຢ່າງຖືກຕ້ອງເພື່ອອະນຸຍາດໃຫ້ມີການເຊື່ອມສານອກະສານ, ເພາະວ່າອິນເຕີເຟດ WebDAV ອາດຖືກທໍາລາຍ ", + "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "ເວັບເຊີບເວີ ຂອງທ່ານຍັງບໍ່ຖືກຕັ້ງຄ່າຢ່າງຖືກຕ້ອງເພື່ອອະນຸຍາດໃຫ້ຟາຍເອກະສານກົງກັນ, ເພາະວ່າອິນເຕີເຟດ WebDAV ອາດຖືກທໍາລາຍ ", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "ເວັບໄຊຂອງທ່ານບໍ່ໄດ້ຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ເພື່ອແກ້ ໄຂ \"{url}\" . ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "ເວັບໄຊຂອງທ່ານບໍ່ໄດ້ຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ເພື່ອແກ້ ໄຂ \"{url}\" . ມັກຈະກ່ຽວຂ້ອງກັບການຕັ້ງຄ່າເວັບໄຊທີ່ບໍ່ມີການປັບປຸງເພື່ອສົ່ງໂຟນເດີນີ້ໂດຍກົງ. ກະລຸນາປຽບທຽບການຕັ້ງຄ່າຂອງທ່ານກັບກົດລະບຽບການຂຽນຄືນທີ່ຖືກສົ່ງໃນ \".htaccess\" ສໍາລັບ Apache ຫຼື ທີ່ສະຫນອງໃນເອກະສານສໍາລັບ Nginx ທີ່ມັນເປັນ {linkstart}ຫນ້າເອກະສານ↗{linkend}. ໃນ Nginx ເຫຼົ່ານັ້ນໂດຍປົກກະຕິແລ້ວແມ່ນເລີ່ມຕົ້ນດ້ວຍ \"ສະຖານທີ່ ~\" ທີ່ຕ້ອງການການປັບປຸງ.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "ເວັບ ໄຊຂອງທ່ານບໍ່ໄດ້ ຕິດຕັ້ງຢ່າງຖືກຕ້ອງເພື່ອສົ່ງຟາຍ ໌.woff2 . ໂດຍປົກກະຕິແລ້ວແມ່ນບັນຫາທີ່ມີການຕັ້ງຄ່າ Nginx. ສໍາລັບ Nextcloud 15 ມັນຈໍາເປັນຕ້ອງມີການປັບຕົວເພື່ອສົ່ງຟາຍ .woff2 ອີກດ້ວຍ. ປຽບທຽບການຕັ້ງຄ່າ Nginx ຂອງທ່ານກັບການຕັ້ງຄ່າທີ່ ແນະນໍາໃນເອກະສານ {linkstart} ຂອງພວກເຮົາ ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP ບໍ່ໄດ້ຮັບການຕັ້ງຄ່າຢ່າງເຫມາະສົມເພື່ອສອບຖາມຕົວແປສະພາບແວດລ້ອມຂອງລະບົບ. ການທົດສອບກັບ getenv(\"PATH\") ພຽງແຕ່ກັບຄືນການຕອບສະຫນອງທີ່ຫວ່າງເປົ່າ.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "ກະລຸນາກວດເບິ່ງເອກະສານການຕິດຕັ້ງ {linkstart}↗{linkend} ສໍາລັບບັນທຶກການຕັ້ງຄ່າ PHP ແລະ ການຕັ້ງຄ່າ PHP ຂອງ server ຂອງທ່ານ, ໂດຍສະເພາະເມື່ອໃຊ້ php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "ການຕັ້ງຄ່າແບບອ່ານເທົ່ານັ້ນໄດ້ຖືກເປີດໃຊ້. ການຕັ້ງຄ່າປ້ອງກັນບາງຢ່າງຜ່ານເວັບໄຊ. ຍິ່ງໄປກວ່ານັ້ນ, ຟາຍຈໍາເປັນຕ້ອງໄດ້ຂຽນດ້ວຍມືສໍາລັບທຸກໆການປັບປຸງ.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "ຖານຂໍ້ມູນຂອງທ່ານບໍ່ສາມາດດຳເນີນການກັບ \"READ COMMITTED”. ປະເພດການເຮັດທຸລະກຳລະດັບນີ້ “ ຊື່ງອາດເຮັດໃຫ້ເກີດບັນຫາ ໃນເວລາ ເປີດການປະຕິບັດການຫຼາຍ ລາຍການພ້ອມກັນ.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "ໂມດູນ PHP \"fileinfo\" ຫາຍໄປ. ແນະນຳ ໃຫ້ເປີດໃຊ້ໂມດູນນີ້ ເພື່ອໃຫ້ ໄດ້ຜົນທີ່ດີທີ່ສຸດ ເມື່ອຮ່ວມການກວດກາ MIME", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "ການລັອກຟາຍ ທຸລະກຳ ແມ່ນຖືກປິດ, ອາດຈະນໍາໄປສູ່ບັນຫາຈຳເເນກ. ເຮັດໃຫ້ \"filelocking.enabled\" ໃນ config.php ເພື່ອຫຼີກເວັ້ນບັນຫາເຫຼົ່ານີ້. ເບິ່ງເອກະສານ {linkstart}↗{linkend} ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "ຖ້າ ການຕິດຕັ້ງລະບົບຂອງທ່ານບໍສໍາເລັດ ໃນ root ຂອງໂດເມນ ແລະ ນໍາໃຊ້ໃນລະບົບ cron, ອາດຈະເກີດມາຈາກ ບັນຫາການສ້າງ URL. ເພື່ອຫຼີກລ້ຽງບັນຫາດດັ່ງກ່າວ, ກະລຸນນາ ຕັ້ງຄ່າທາງເລືອກໃນ config.php file ເປັນ \"overwrite.cli.url\" ໃນ webroot ຂອງການຕັ້ງຄ່າ. ( ແນະນໍາ : \"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "ການຕິດຕັ້ງຂອງທ່ານບໍ່ໄດ້ກໍານົດເຂດບໍລິການໂທລະສັບ. ນີ້ແມ່ນຈໍາເປັນເພື່ອຢັ້ງຢືນເບີໂທລະສັບໃນການຕັ້ງຄ່າໂປຟາຍ ທີບໍ່ມີລະຫັດປະເທດ. ເພື່ອອະນຸຍາດ ເລກໝາຍ ທີ່ບໍ່ມີລະຫັດປະເທດ, ກະລຸນາເພີ່ມ \"ກໍານົດເຂດບໍລິການໂທລະສັບ\" ທີ່ມີລະຫັດ {linkstart}ລະຫັດ ISO 3166-1 ↗{linkend} ເຂດພື້ນທີ່ໃສ່ຟາຍ config ຂອງທ່ານ.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "ເປັນໄປບໍ່ໄດ້ ທີ່ຈະດໍາເນີນງານcron ຜ່ານ CLI ໄດ້ . ຂໍ້ຜິດພາດທາງດ້ານເຕັກນິກໄດ້ປາກົດຂື້ນ:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "ເວັບໄຊ ບໍ່ມີການເຊື່ອມຕໍ່ອິນເຕີເນັດ: ຫຼາຍຈຸດສຸດທ້າຍບໍ່ສາມາດເຂົ້າເຖິງໄດ້. ຫມາຍຄວາມວ່າຄຸນສົມບັດບາງຢ່າງເຊັ່ນການ ຕິດຕັ້ງພື້ນທີເກັບຂໍ້ມູນພາຍນອກ, ການແຈ້ງເຕືອນ ກ່ຽວກັບການອັບເດດ ຫຼື ການ ຕິດຕັ້ງຂອງ apps ຂອງ ພາກ ສ່ວນທີສາມຈະບໍ່ໄດ້ ຜົນ . ການເຂົ້າເຖິງຟາຍຈາກບ່ອນທີ່ຫ່າງໄກ ແລະ ການສົ່ງອີເມວແຈ້ງເຕືອນອາດຈະບໍ່ເຮັດວຽກເຊັ່ນກັນ. ຕ້ອງສ້າງການເຊື່ອມຕໍ່ຈາກ server ກັບອິນເຕີເນັດເພື່ອເຂົ້າເຖິງກັບຄຸນລັກສະນະທັງຫມົດ.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "ບໍ່ມີການຕັ້ງຄ່າ cache ຄວາມຈໍາ. ເພື່ອເພີ່ມປະສິດທິພາບ, ກະລຸນາຕັ້ງຄ່າ memcache, ຖ້າມີ. ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "ບໍ່ມີແຫລ່ງທີ່ເຫມາະ ສົມສໍາລັບການສູມເອົາ ທີ່ພົບໂດຍ PHP ຊຶ່ງເຫດຜົນຄວາມປອດ ໄພ . ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "ປະຈຸບັນທ່ານກໍາລັງດໍາເນີນການ PHP {version}. ອັບເດດລຸ້ນ PHP ຂອງທ່ານເພື່ອໃຊ້ {linkstart} ປະສິດທິພາບ ແລະ ການປັບປຸງຄວາມປອດໄພທີ່ສະຫນອງໃຫ້ໂດຍກຸ່ມ PHP ↗{linkend} ທັນທີທີ່ການແຈກຢາຍຂອງທ່ານສະຫນັບສະຫນູນມັນ.", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 ເປັນສະບັບສຸດທ້າຍທີ່ສະຫນັບສະຫນູນ PHP 7.2. Nextcloud 21 ຊື່ງຕ້ອງມີ PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "ການຕັ້ງຄ່າຫົວຂໍ້ proxy ກັບຄືນບໍ່ຖືກຕ້ອງ, ຫຼື ທ່ານກໍາລັງເຂົ້າເຖິງ Nextcloud ຈາກ proxy ທີ່ເຊື່ອຖືໄດ້. ຖ້າບໍ່ດັ່ງນັ້ນ, ນີ້ແມ່ນບັນຫາຄວາມປອດໄພ ແລະ ສາມາດອະນຸຍາດໃຫ້ຜູ້ໂຈມຕີ spoof ທີ່ຢູ່ IP ຂອງພວກເຂົາດັ່ງທີ່ເຫັນໄດ້ກັບ Nextcloud. ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "cachedຄວາມຈຳ ຖືກຕັ້ງຄ່າ ເປັນ cache ແຈກຢາຍ, ແຕ່ໂມດູນ PHP ທີ່ບໍ່ຖືກຕ້ອງ \"memcache\" ຖືກຕິດຕັ້ງ. OCMemcacheMemcached ສະຫນັບສະຫນູນພຽງແຕ່ \"memcached\" ແລະ ບໍ່ແມ່ນ \"memcache\". ເບິ່ງ {linkstart}memcached wiki ກ່ຽວກັບທັງສອງໂມດູນ ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "ບາງຟາຍບໍ່ໄດ້ຜ່ານການກວດສອບຄວາມເຊື່ຶອຖື. ຂໍ້ມູນເພີ່ມເຕີມກ່ຽວກັບວິທີແກ້ໄຂບັນຫານີ້ສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart1}↗{linkend}. ({linkstart2}ລາຍການຟາຍທີ່ບໍ່ມີຜົນ... {linkend} / {linkstart3}Rescan... {linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "ໂມດູນ PHP OPcache ບໍ່ໄດ້ຖືກໂຫຼດ. {linkstart} ສໍາລັບການປະຕິບັດທີ່ດີກວ່າ ໄດ້ຮັບ ການແນະນໍາ ↗{linkend} ເພື່ອ ໂຫຼດ ມັນ ເຂົ້າ ໄປ ໃນ ການ ຕິດ ຕັ້ງ PHP ຂອງ ທ່ານ .", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "ບໍ່ມີ ການກໍານົດ ຫນ້າທີ່ PHP \"ກໍານົດເວລາ\". ອາດຈະເຮັດໃຫ້ scripts ຖືກຢຸດກາງ ການດໍາເນີນງານ, ແລະທໍາລາຍການຕິດຕັ້ງຂອງທ່ານ. ເນະນໍາໃຫ້ເປີດນໍາໃຊ້ ການກໍານົດເວລາ.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "PHP ຂອງທ່ານບໍ່ໄດ້ຮັບການສະຫນັບສະຫນູນ FreeType, ເຮັດໃຫ້ຮູບພາບໜ້າປົກຄວາມຄົມຊັດບໍ່ລະອຽດ ລວມທັງບັນຫາ ການຕັ້ງຄ່າ interface.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "ບໍ່ມີຊື່ index \"{indexName}\" ໃນຕາຕະລາງ \"{tableName}\".", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "ຖານຂໍ້ມູນແມ່ນຂາດບາງ columns ທາງເລືອກ. ເນື່ອງຈາກວ່າການເພີ່ມ columns ໃສ່ ຕາຕະລາງໃຫຍ່ ອາດ ຈະ ໃຊ້ເວລາດົນ ທີ່ບໍ່ໄດ້ຕື່ມໂດຍອັດຕະໂນມັດ ເມື່ອເລືອກ ໄດ້ . ໂດຍການດຳ \"occ db:add-missing-columns\" columns ທີ່ຂາດໄປສາມາດເພີ່ມໄດ້ດ້ວຍມືໃນຂະນະທີ່ຕົວຢ່າງຍັງດໍາເນີນການຕໍ່ໄປ. ເມື່ອມີການເພີ່ມ columns ອາດຈະປັບປຸງການຕອບສະຫນອງ ຫຼື ການໃຊ້ງານ.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "ຕົວຢ່າງເເນະນຳຂາດໂມດູນ PHP, ສໍາລັບການປັບປຸງ ແລະ ການປະຕິບັດທີ່ດີກວ່າ ນັ້ນ ແມ່ນແນະນໍາໃຫ້ຕິດຕັ້ງ ", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "ໂມດູນ php-imagick ໃນກໍລະນີນີ້ບໍ່ມີການສະຫນັບສະຫນູນ SVG. ເພື່ອຄວາມສອດຄ່ອງທີ່ດີກວ່າແມ່ນແນະນໍາໃຫ້ຕິດຕັ້ງ.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "ບາງຄໍລໍາໃນຖານຂໍ້ມູນແມ່ນຂາດການປ່ຽນ ໂຕແປໃຫຍ່ ໃຫຍ່ . ເນື່ອງຈາກວ່າການປ່ຽນ ແປງແບບ column ໃນຕາຕະລາງ ອາດຈະໃຊ້ ເວລາດົນ ທີ່ພວກເຂົາເຈົ້າບໍ່ໄດ້ ປ່ຽນແປງ ໂດຍອັດຕະໂນມັດ . ໂດຍການແລ່ນ 'occ db:convert-filecache-bigint' ຜຸ້ທີ່ກໍາລັງປ່ຽນແປງທີ່ກໍາລັງຄ້າງສາມາດນໍາໃຊ້ໄດ້ດ້ວຍມື. ການດໍາເນີນງານນີ້ຈໍາເປັນຕ້ອງໄດ້ ເຮັດ ໃນຂະນະທີ່ຕົວຢ່າງແມ່ນ offline . ສໍາລັບລາຍລະອຽດເພີ່ມເຕີມອ່ານ {linkstart}ຫນ້າເອກະສານກ່ຽວ ກັບ ↗{linkend} ນີ້.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite ກໍາລັງຖືກນໍາໃຊ້ເປັນຖານຂໍ້ມູນbackend. ສໍາລັບການຕິດຕັ້ງທີ່ໃຫຍ່ກວ່າ ພວກເຮົາຂໍແນະນໍາໃຫ້ທ່ານປ່ຽນໄປຫາ backend ຖານຂໍ້ມູນທີ່ແຕກຕ່າງ ກັນ .", "This is particularly recommended when using the desktop client for file synchronisation." : "ແນະນໍາໂດຍສະເພາະເມື່ອການນໍາໃຊ້ desktop ລູກຄ້າ ສໍາລັບການ synchronisation ຟາຍ", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "ເພື່ອຍົກຍ້າຍໄປຖານຂໍ້ມູນອື່ນໃຊ້ເຄື່ອງມືຄໍາສັ່ງ: 'occ db:convert-type', ຫຼື ເບິ່ງເອກະສານ {linkstart}↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "ຂີດຈໍາກັດຄວາມຈໍາ PHP ແມ່ນຕ່ໍາກວ່າຄ່າທີ່ແນະນໍາຂອງ 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "ຊອບແວບາງຢ່າງ ເປັນຜູ້ ໃຊ້ ທີ່ແຕກຕ່າງຈາກເວັບໄຊ . ນີ້ອາດຈະເປັນກໍລະນີຖ້າຫາກມີການຕິດຕັ້ງແອັບພລິເຄຊັນດ້ວຍມື. ກວດສອບການອະນຸຍາດຂອງແອັບພລິເຄຊັນດັ່ງຕໍ່ໄປນີ້:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL ຖືກນໍາໃຊ້ເປັນຖານຂໍ້ມູນແຕ່ບໍ່ສະຫນັບສະຫນູນຕົວອັກສອນ 4 byte. ເພື່ອ ໃຫ້ ສາມາດຮັບ 4-byteໄດ້(ເຊັ່ນ emojis) ໂດຍບໍ່ມີບັນຫາໃນຊື່ຟາຍ ຫຼື ຄໍາ ເຫັນຍົກຕົວຢ່າງ ແນະນໍາໃຫ້ ເຮັດໃຫ້ ການສະຫນັບສະຫນູນ 4 byte ໃນ MySQL . ສໍາ ລັບ ລາຍ ລະ ອຽດ ເພີ່ມ ເຕີມ ອ່ານ {linkstart} ຫນ້າ ເອກະ ສານ ກ່ຽວ ກັບ ↗{linkend} ນີ້.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "ຕົວຢ່າງນີ້ໃຊ້ S3 ເປັນການເກັບກໍາຂໍ້ມູນຕົ້ນຕໍ. ຟາຍອັບໂຫຼດໄດ້ເກັບ ໄວ້ ຊົ່ວ ຄາວ ຢູ່ ໃນ server ແລະ ດັ່ງນັ້ນຈຶ່ງແນະນໍາໃຫ້ມີ ພຶນທີ່ວ່າງ 50 GB ໃນ directory temp ຂອງ PHP . ກວດເບິ່ງບັນຊີລາຍລະອຽດກ່ຽວກັບຊ່ອງທາງ ແລະ ພຶນທີ່ວ່າງ . ເພື່ອປັບປຸງກະລຸນາປ່ຽນ directory ຊົ່ວຄາວໃນ php.ini ຫຼື ເຮັດໃຫ້ມີຊ່ອງຫວ່າງຫຼາຍຂຶ້ນໃນຊ່ອງທາງນັ້ນ.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "ທ່ານກໍາລັງເຂົ້າເຖິງຕົວຢ່າງຂອງທ່ານ ກ່ຽວກັບການຕິດຕໍ່ທີ່ປອດໄພ , ເຖິງຢ່າງໃດ ກໍ ຕາມ ຕົວຢ່າງຂອງ ທ່ານແມ່ນການສ້າງ URLs ບໍ່ ຫມັ້ນ ຄົງ . ຫມາຍຄວາມວ່າທ່ານຢູ່ເບື້ອງຫຼັງ proxy reverse ແລະ ຕົວປ່ຽນ config overwrite ບໍ່ໄດ້ຖືກກໍານົດຢ່າງຖືກຕ້ອງ. ກະລຸນາອ່ານ {linkstart}ຫນ້າເອກະສານກ່ຽວກັບ↗{linkend}.", "Error occurred while checking server setup" : "ເກີດຂໍ້ຜິດພາດໃນຂະນະທີ່ກວດສອບການຕັ້ງຄ່າ server", + "For more details see the {linkstart}documentation ↗{linkend}." : "ສໍາລັບລາຍລະອຽດເພີ່ມເຕີມເບິ່ງໃນ {linkstart}↗{linkend} ເອກະສານ", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "ຊອບແວຂໍ້ມູນ ແລະ ຟາຍ ຂອງ ທ່ານ ອາດ ຈະ ສາ ມາດ ເຂົ້າ ເຖິງ ໄດ້ ຈາກ ອິນ ເຕີ ເນັດ . .ຟາຍ htaccess ບໍ່ ໄດ້ ເຮັດ ວຽກ . ແນະ ນໍາ ໃຫ້ ທ່ານ ຕັ້ງ ຄ່າ ເວັບ ໄຊ ຂອງ ທ່ານ ເພື່ອ ວ່າ ຂໍ້ ມູນໂດຍກົງ ບໍ່ ສາ ມາດ ເຂົ້າ ເຖິງ ໄດ້ ອີກ ຕໍ່ ໄປ , ຫຼື ການ ເຄື່ອນ ຍ້າຍຂໍ້ ມູນ ຢູ່ ນອກຮາກຖານຂອງເອກະ ສານ web server ໂດຍກົງ ", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "ຫົວຂໍ້ HTTP \"{header}\" ບໍ່ໄດ້ຖືກກໍານົດໃຫ້ \"{expected}\". ນີ້ແມ່ນຄວາມສ່ຽງດ້ານຄວາມປອດໄພ ຫຼື ຄວາມເປັນສ່ວນຕົວທີ່ອາດເປັນໄປໄດ້, ແນະນໍາໃຫ້ປັບການຕັ້ງຄ່ານີ້", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "ຫົວຂໍ້ HTTP \"{header}\" ບໍ່ໄດ້ຖືກກໍານົດໃຫ້ \"{expected}\". ບາງຄຸນລັກສະນະອາດຈະເຮັດວຽກບໍ່ຖືກຕ້ອງ , ແນະນໍາໃຫ້ປັບການຕັ້ງຄ່ານີ້ຕາມທີ່ວາງໄວ້.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "ຫົວຂໍ້ \"{header}\" HTTP ບໍ່ມີ \"{expected}\". ນີ້ແມ່ນຄວາມສ່ຽງດ້ານຄວາມປອດໄພ ຫຼືຄວາມເປັນສ່ວນຕົວ, ແນະນໍາໃຫ້ປັບການຕັ້ງຄ່າຕາມນີ້.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "ຫົວຂໍ້ \"{header}\" HTTP ບໍ່ໄດ້ຖືກກໍານົດໃຫ້ \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ຫຼື \"{val5}\". ສາມາດເຮັດໃຫ້ຂໍ້ມູນ referer ຮົ່ວ. ເບິ່ງຂໍ້ແນະນໍາ {linkstart}W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "ຫົວຂໍ້ \"Strict-Transport-Security\" HTTP ບໍ່ໄດ້ກໍານົດໄວ້ຢ່າງຫນ້ອຍ \"{seconds}\" ວິນາທີ. ສໍາລັບເພີ່ມຄວາມປອດໄພ, ແນະນໍາໃຫ້ເຮັດໃຫ້ HSTS ຕາມທີ່ໄດ້ບັນຍາຍໄວ້ໃນ{linkstart}↗{linkend}ຄໍາແນະນໍາຄວາມປອດໄພ ", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "ການເຂົ້າເຖິງເວັບໄຊບໍ່ປອດໄພຜ່ານ HTTP. ທ່ານໄດ້ ຮັບຄໍາແນະນໍາທີ່ ຈະ ຕັ້ງ server ຂອງທ່ານ ເພື່ອ ຮຽກໃຊ້ HTTPS ແທນ , ດັ່ງ ທີ່ ໄດ້ ບັນ ຍາຍ ໃນ {linkstart}↗{linkend} ຄໍາແນະນໍາຄວາມປອດໄພ .", "unknown text" : "ຂໍ້ຄວາມທີ່ບໍ່ຮູ້", "Hello world!" : "ສະບາຍດີ", "sunny" : "ມີເເດດ", diff --git a/core/l10n/lo.json b/core/l10n/lo.json index b327cfe2df8..ec47844d88c 100644 --- a/core/l10n/lo.json +++ b/core/l10n/lo.json @@ -2,13 +2,13 @@ "Please select a file." : "ກະລຸນາເລືອກຟາຍ", "File is too big" : "ຟາຍໃຫຍ່ໂພດ", "The selected file is not an image." : "ຟາຍນີ້ບໍ່ແມ່ນປະເພດຮູບ", - "The selected file cannot be read." : "ຟາຍນີ້ບໍ່ສາມາດອ່ານໄດ້", + "The selected file cannot be read." : "ຟາຍທີ່ເລືອກບໍ່ສາມາດອ່ານໄດ້", "Invalid file provided" : "ຟາຍບໍ່ຖືກຕ້ອງ", "No image or file provided" : "ບໍ່ມີຮູບພາບ ຫຼື ຟາຍ", "Unknown filetype" : "ບໍ່ຮູ້ປະເພດຂອງຟາຍ", "Invalid image" : "ບໍ່ມີຮູບພາບ", "An error occurred. Please contact your admin." : "ຄັດຂ້ອງ ກະລຸນລາຕິດຕໍ່ ທີມບໍລິຫານ", - "No temporary profile picture available, try again" : "ບໍ່ມີຮູບພາບຫຼືຟາຍຊົ່ວຄາວ, ກະລຸນນາ ລອງໃໝ່", + "No temporary profile picture available, try again" : "ບໍ່ມີຮູບພາບ ຫຼື ຟາຍຊົ່ວຄາວ, ກະລຸນນາ ລອງໃໝ່", "No crop data provided" : "ບໍ່ມີຂໍ້ມູນທີຕັດຕໍ່ປ້ອນເຂົ້າ", "No valid crop data provided" : "ບໍ່ມີຂໍ້ມູນຕັດຕໍ່ທີຖືກຕ້ອງປ້ອນເຂົ້າ", "Crop is not square" : "ການຕັດຕໍ່ບໍ່ເປັນຮູບສີ່ຫຼຽມ", @@ -19,16 +19,16 @@ "Password reset is disabled" : "ບໍ່ສາມາດປ່ຽນລະຫັດຜ່ານ", "Couldn't reset password because the token is invalid" : "ບໍ່ສາມາດປ່ຽນລະຫັດຜ່ານ ເພາະ ໂຕກເກັນ ບໍ່ຖືກຕ້ອງ", "Couldn't reset password because the token is expired" : "ບໍ່ສາມາດປ່ຽນລະຫັດຜ່ານ ເພາະ ໂຕກເກັນ ໝົດອາຍຸ", - "%s password reset" : "%s ປ່ຽນລະຫັດຜ່ານ", + "%s password reset" : " ປ່ຽນລະຫັດຜ່ານ%s", "Password reset" : "ປ່ຽນບະຫັດຜ່ານ", "Click the following button to reset your password. If you have not requested the password reset, then ignore this email." : "ກົດປຸ່ມນີ້ເພື່ອປ່ຽນລະຫັດຜ່ານ. ຖ້າຫາກທ່ານບໍ່ໄດ້ຮ້ອງຂໍການປ່ຽນລະຫັດຜ່ານ, ກະລຸນນາຍົກເລີກ ເມລນີ້. ", "Click the following link to reset your password. If you have not requested the password reset, then ignore this email." : "ກົດປຸ່ມນີ້ເພື່ອປ່ຽນລະຫັດຜ່ານ. ຖ້າຫາກທ່ານບໍ່ໄດ້ຮ້ອງຂໍການປ່ຽນລະຫັດຜ່ານ, ກະລຸນນາຍົກເລີກ ເມລນີ້. ", "Reset your password" : "່ປ່ຽນລະຫັດຜ່ານ", "Nextcloud Server" : "ເຊີບເວີ ເນັກຄຮາວ", "Some of your link shares have been removed" : "ບາງລີ້ງທີທ່ານໄດ້ແບ່ງປັນຖືກຍົກເລີກແລ້ວ", - "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "ເນື່ອງຈາກບັນຫາດ້ານຄວາມປອດໄພ, ພວກເຮົາໄດ້ຍົກເບີກການແບ່ງປັນລີ້ງ. ສໍາລັບຂໍ້ມູນເພີ່ມເຕີ່ມ ກະລຸນນາກົດເບີ່ງລີງ ", - "The user limit of this instance is reached." : "ຮອດກໍານົດຈໍາກັດຈໍານວນຜູ້ໃຊ້ແລ້ວ", - "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "ໃສ່ລະຫັດການສະໝັກ ໃຊ້ ຂອງທ່ານເພື່ອເພີ່ມຂີດຄວາມສາມາດຂອງຜູ້ໃຊ້. ສຳລັບຂໍ້ມູນເພີ່ມເຕີມກ່ຽວກັບ Nextcloud ສາມາດເບິ່ງເວັບໄຊທ໌ຂອງພວກເຮົາ.", + "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "ເນື່ອງຈາກບັນຫາດ້ານຄວາມປອດໄພ, ພວກເຮົາໄດ້ຍົກເລິກການແບ່ງປັນລີ້ງ. ສໍາລັບຂໍ້ມູນເພີ່ມເຕີ່ມ ກະລຸນນາກົດເບີ່ງລີງ ", + "The user limit of this instance is reached." : "ຮອດກໍານົດ ຈໍາກັດຈໍານວນຜູ້ໃຊ້ແລ້ວ", + "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "ໃສ່ລະຫັດຜ່ານສະໝັກ ເພື່ອເພີ່ມຂີດຄວາມສາມາດຂອງຜູ້ໃຊ້. ສຳລັບຂໍ້ມູນເພີ່ມເຕີມກ່ຽວກັບ Nextcloud ສາມາດເບິ່ງເວັບໄຊທ໌ຂອງພວກເຮົາ.", "Preparing update" : "ກະກຽມອັບເດດ", "[%d / %d]: %s" : "[%d/%d]:%s", "Repair step:" : "ຂັ້ນຕອນໃນການປັບປຸງ", @@ -42,13 +42,13 @@ "Maintenance mode is kept active" : "ໂມດການບໍາລຸງຮັກສາໄດ້ຖືກເປີດປະໄວ້", "Updating database schema" : "ກໍາລັງອັບເດດແຜນຜັງຖານຂໍ້ມູນ", "Updated database" : "ຖານຂໍ້ມູນອັບເດດແລ້ວ", - "Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "ການກວດສອບວ່າແຜນຜັງຖານຂໍ້ມູນສາມາດອັບເດດໄດ້ຫລືບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ຂື້ນກັບຂະໜາດ ຂອງຖານຂໍ້ມູນ)", + "Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "ການກວດສອບວ່າແຜນຜັງຖານຂໍ້ມູນສາມາດອັບເດດໄດ້ ຫລື ບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ຂື້ນກັບຂະໜາດ ຂອງຖານຂໍ້ມູນ)", "Checked database schema update" : "ເລືອກແຜນຜັງຖານຂໍ້ມູນທີຈະອັບເດດ", "Checking updates of apps" : "ກໍາລັງກວດສອບການອັບເດດ ຂອງແອັບ ", "Checking for update of app \"%s\" in appstore" : "ກໍາລັງກວດສອບການເອັບເດດ ແອັບ \"%s\" ໃນແອັບສະຕໍ", "Update app \"%s\" from appstore" : "ອັບເດດ ເອັບ \"%s\" ຈາກ ແອັບສະຕໍ", "Checked for update of app \"%s\" in appstore" : "ກວດການອັບເດດ ແອັບ \"%s\" ໃນເອັບສະຕໍ", - "Checking whether the database schema for %s can be updated (this can take a long time depending on the database size)" : "ກວດເບິ່ງວ່າແຜນຜັງຖານຂໍ້ມູນ ສຳລັບ %s ສາມາດອັບເດດໄດ້ຫລືບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ອີງຕາມຂະໜາດ ຂອງຖານຂໍ້ມູນ)", + "Checking whether the database schema for %s can be updated (this can take a long time depending on the database size)" : "ກວດເບິ່ງວ່າແຜນຜັງຖານຂໍ້ມູນ ສຳລັບ %s ສາມາດອັບເດດໄດ້ ຫລື ບໍ່ (ມັນອາດໃຊ້ເວລາດົນ ອີງຕາມຂະໜາດ ຂອງຖານຂໍ້ມູນ)", "Checked database schema update for apps" : "ກວດສອບການອັບເດດແຜນຜັງຖານຂໍ້ມູນ ສຳລັບແອັບ.", "Updated \"%1$s\" to %2$s" : "ອັບເດດ \"%1$s\" ຫາ %2$s", "Set log level to debug" : "ກໍານົດລະດັບຂອງ Log ເພື່ອແກ້ຈຸດບົກຜ່ອງ", @@ -58,16 +58,28 @@ "%s (incompatible)" : "%s (ຂັດແຍ້ງ)", "The following apps have been disabled: %s" : "ແອັບດັ່ງກ່າວໄດ້ຖືກປີດໄວ້:%s", "Already up to date" : "ໄດ້ອັບເດດແລ້ວ", - "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "ເວັບເຊີບເວີ ຂອງທ່ານຍັງບໍ່ຖືກຕັ້ງຄ່າຢ່າງຖືກຕ້ອງເພື່ອອະນຸຍາດໃຫ້ມີການເຊື່ອມສານອກະສານ, ເພາະວ່າອິນເຕີເຟດ WebDAV ອາດຖືກທໍາລາຍ ", + "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "ເວັບເຊີບເວີ ຂອງທ່ານຍັງບໍ່ຖືກຕັ້ງຄ່າຢ່າງຖືກຕ້ອງເພື່ອອະນຸຍາດໃຫ້ຟາຍເອກະສານກົງກັນ, ເພາະວ່າອິນເຕີເຟດ WebDAV ອາດຖືກທໍາລາຍ ", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "ເວັບໄຊຂອງທ່ານບໍ່ໄດ້ຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ເພື່ອແກ້ ໄຂ \"{url}\" . ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "ເວັບໄຊຂອງທ່ານບໍ່ໄດ້ຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ເພື່ອແກ້ ໄຂ \"{url}\" . ມັກຈະກ່ຽວຂ້ອງກັບການຕັ້ງຄ່າເວັບໄຊທີ່ບໍ່ມີການປັບປຸງເພື່ອສົ່ງໂຟນເດີນີ້ໂດຍກົງ. ກະລຸນາປຽບທຽບການຕັ້ງຄ່າຂອງທ່ານກັບກົດລະບຽບການຂຽນຄືນທີ່ຖືກສົ່ງໃນ \".htaccess\" ສໍາລັບ Apache ຫຼື ທີ່ສະຫນອງໃນເອກະສານສໍາລັບ Nginx ທີ່ມັນເປັນ {linkstart}ຫນ້າເອກະສານ↗{linkend}. ໃນ Nginx ເຫຼົ່ານັ້ນໂດຍປົກກະຕິແລ້ວແມ່ນເລີ່ມຕົ້ນດ້ວຍ \"ສະຖານທີ່ ~\" ທີ່ຕ້ອງການການປັບປຸງ.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "ເວັບ ໄຊຂອງທ່ານບໍ່ໄດ້ ຕິດຕັ້ງຢ່າງຖືກຕ້ອງເພື່ອສົ່ງຟາຍ ໌.woff2 . ໂດຍປົກກະຕິແລ້ວແມ່ນບັນຫາທີ່ມີການຕັ້ງຄ່າ Nginx. ສໍາລັບ Nextcloud 15 ມັນຈໍາເປັນຕ້ອງມີການປັບຕົວເພື່ອສົ່ງຟາຍ .woff2 ອີກດ້ວຍ. ປຽບທຽບການຕັ້ງຄ່າ Nginx ຂອງທ່ານກັບການຕັ້ງຄ່າທີ່ ແນະນໍາໃນເອກະສານ {linkstart} ຂອງພວກເຮົາ ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP ບໍ່ໄດ້ຮັບການຕັ້ງຄ່າຢ່າງເຫມາະສົມເພື່ອສອບຖາມຕົວແປສະພາບແວດລ້ອມຂອງລະບົບ. ການທົດສອບກັບ getenv(\"PATH\") ພຽງແຕ່ກັບຄືນການຕອບສະຫນອງທີ່ຫວ່າງເປົ່າ.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "ກະລຸນາກວດເບິ່ງເອກະສານການຕິດຕັ້ງ {linkstart}↗{linkend} ສໍາລັບບັນທຶກການຕັ້ງຄ່າ PHP ແລະ ການຕັ້ງຄ່າ PHP ຂອງ server ຂອງທ່ານ, ໂດຍສະເພາະເມື່ອໃຊ້ php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "ການຕັ້ງຄ່າແບບອ່ານເທົ່ານັ້ນໄດ້ຖືກເປີດໃຊ້. ການຕັ້ງຄ່າປ້ອງກັນບາງຢ່າງຜ່ານເວັບໄຊ. ຍິ່ງໄປກວ່ານັ້ນ, ຟາຍຈໍາເປັນຕ້ອງໄດ້ຂຽນດ້ວຍມືສໍາລັບທຸກໆການປັບປຸງ.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "ຖານຂໍ້ມູນຂອງທ່ານບໍ່ສາມາດດຳເນີນການກັບ \"READ COMMITTED”. ປະເພດການເຮັດທຸລະກຳລະດັບນີ້ “ ຊື່ງອາດເຮັດໃຫ້ເກີດບັນຫາ ໃນເວລາ ເປີດການປະຕິບັດການຫຼາຍ ລາຍການພ້ອມກັນ.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "ໂມດູນ PHP \"fileinfo\" ຫາຍໄປ. ແນະນຳ ໃຫ້ເປີດໃຊ້ໂມດູນນີ້ ເພື່ອໃຫ້ ໄດ້ຜົນທີ່ດີທີ່ສຸດ ເມື່ອຮ່ວມການກວດກາ MIME", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "ການລັອກຟາຍ ທຸລະກຳ ແມ່ນຖືກປິດ, ອາດຈະນໍາໄປສູ່ບັນຫາຈຳເເນກ. ເຮັດໃຫ້ \"filelocking.enabled\" ໃນ config.php ເພື່ອຫຼີກເວັ້ນບັນຫາເຫຼົ່ານີ້. ເບິ່ງເອກະສານ {linkstart}↗{linkend} ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "ຖ້າ ການຕິດຕັ້ງລະບົບຂອງທ່ານບໍສໍາເລັດ ໃນ root ຂອງໂດເມນ ແລະ ນໍາໃຊ້ໃນລະບົບ cron, ອາດຈະເກີດມາຈາກ ບັນຫາການສ້າງ URL. ເພື່ອຫຼີກລ້ຽງບັນຫາດດັ່ງກ່າວ, ກະລຸນນາ ຕັ້ງຄ່າທາງເລືອກໃນ config.php file ເປັນ \"overwrite.cli.url\" ໃນ webroot ຂອງການຕັ້ງຄ່າ. ( ແນະນໍາ : \"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "ການຕິດຕັ້ງຂອງທ່ານບໍ່ໄດ້ກໍານົດເຂດບໍລິການໂທລະສັບ. ນີ້ແມ່ນຈໍາເປັນເພື່ອຢັ້ງຢືນເບີໂທລະສັບໃນການຕັ້ງຄ່າໂປຟາຍ ທີບໍ່ມີລະຫັດປະເທດ. ເພື່ອອະນຸຍາດ ເລກໝາຍ ທີ່ບໍ່ມີລະຫັດປະເທດ, ກະລຸນາເພີ່ມ \"ກໍານົດເຂດບໍລິການໂທລະສັບ\" ທີ່ມີລະຫັດ {linkstart}ລະຫັດ ISO 3166-1 ↗{linkend} ເຂດພື້ນທີ່ໃສ່ຟາຍ config ຂອງທ່ານ.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "ເປັນໄປບໍ່ໄດ້ ທີ່ຈະດໍາເນີນງານcron ຜ່ານ CLI ໄດ້ . ຂໍ້ຜິດພາດທາງດ້ານເຕັກນິກໄດ້ປາກົດຂື້ນ:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "ເວັບໄຊ ບໍ່ມີການເຊື່ອມຕໍ່ອິນເຕີເນັດ: ຫຼາຍຈຸດສຸດທ້າຍບໍ່ສາມາດເຂົ້າເຖິງໄດ້. ຫມາຍຄວາມວ່າຄຸນສົມບັດບາງຢ່າງເຊັ່ນການ ຕິດຕັ້ງພື້ນທີເກັບຂໍ້ມູນພາຍນອກ, ການແຈ້ງເຕືອນ ກ່ຽວກັບການອັບເດດ ຫຼື ການ ຕິດຕັ້ງຂອງ apps ຂອງ ພາກ ສ່ວນທີສາມຈະບໍ່ໄດ້ ຜົນ . ການເຂົ້າເຖິງຟາຍຈາກບ່ອນທີ່ຫ່າງໄກ ແລະ ການສົ່ງອີເມວແຈ້ງເຕືອນອາດຈະບໍ່ເຮັດວຽກເຊັ່ນກັນ. ຕ້ອງສ້າງການເຊື່ອມຕໍ່ຈາກ server ກັບອິນເຕີເນັດເພື່ອເຂົ້າເຖິງກັບຄຸນລັກສະນະທັງຫມົດ.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "ບໍ່ມີການຕັ້ງຄ່າ cache ຄວາມຈໍາ. ເພື່ອເພີ່ມປະສິດທິພາບ, ກະລຸນາຕັ້ງຄ່າ memcache, ຖ້າມີ. ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "ບໍ່ມີແຫລ່ງທີ່ເຫມາະ ສົມສໍາລັບການສູມເອົາ ທີ່ພົບໂດຍ PHP ຊຶ່ງເຫດຜົນຄວາມປອດ ໄພ . ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "ປະຈຸບັນທ່ານກໍາລັງດໍາເນີນການ PHP {version}. ອັບເດດລຸ້ນ PHP ຂອງທ່ານເພື່ອໃຊ້ {linkstart} ປະສິດທິພາບ ແລະ ການປັບປຸງຄວາມປອດໄພທີ່ສະຫນອງໃຫ້ໂດຍກຸ່ມ PHP ↗{linkend} ທັນທີທີ່ການແຈກຢາຍຂອງທ່ານສະຫນັບສະຫນູນມັນ.", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 ເປັນສະບັບສຸດທ້າຍທີ່ສະຫນັບສະຫນູນ PHP 7.2. Nextcloud 21 ຊື່ງຕ້ອງມີ PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "ການຕັ້ງຄ່າຫົວຂໍ້ proxy ກັບຄືນບໍ່ຖືກຕ້ອງ, ຫຼື ທ່ານກໍາລັງເຂົ້າເຖິງ Nextcloud ຈາກ proxy ທີ່ເຊື່ອຖືໄດ້. ຖ້າບໍ່ດັ່ງນັ້ນ, ນີ້ແມ່ນບັນຫາຄວາມປອດໄພ ແລະ ສາມາດອະນຸຍາດໃຫ້ຜູ້ໂຈມຕີ spoof ທີ່ຢູ່ IP ຂອງພວກເຂົາດັ່ງທີ່ເຫັນໄດ້ກັບ Nextcloud. ຂໍ້ມູນເພີ່ມເຕີມສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart}↗{linkend}.", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "cachedຄວາມຈຳ ຖືກຕັ້ງຄ່າ ເປັນ cache ແຈກຢາຍ, ແຕ່ໂມດູນ PHP ທີ່ບໍ່ຖືກຕ້ອງ \"memcache\" ຖືກຕິດຕັ້ງ. OCMemcacheMemcached ສະຫນັບສະຫນູນພຽງແຕ່ \"memcached\" ແລະ ບໍ່ແມ່ນ \"memcache\". ເບິ່ງ {linkstart}memcached wiki ກ່ຽວກັບທັງສອງໂມດູນ ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "ບາງຟາຍບໍ່ໄດ້ຜ່ານການກວດສອບຄວາມເຊື່ຶອຖື. ຂໍ້ມູນເພີ່ມເຕີມກ່ຽວກັບວິທີແກ້ໄຂບັນຫານີ້ສາມາດເບິ່ງໄດ້ໃນເອກະສານ {linkstart1}↗{linkend}. ({linkstart2}ລາຍການຟາຍທີ່ບໍ່ມີຜົນ... {linkend} / {linkstart3}Rescan... {linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "ໂມດູນ PHP OPcache ບໍ່ໄດ້ຖືກໂຫຼດ. {linkstart} ສໍາລັບການປະຕິບັດທີ່ດີກວ່າ ໄດ້ຮັບ ການແນະນໍາ ↗{linkend} ເພື່ອ ໂຫຼດ ມັນ ເຂົ້າ ໄປ ໃນ ການ ຕິດ ຕັ້ງ PHP ຂອງ ທ່ານ .", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "ບໍ່ມີ ການກໍານົດ ຫນ້າທີ່ PHP \"ກໍານົດເວລາ\". ອາດຈະເຮັດໃຫ້ scripts ຖືກຢຸດກາງ ການດໍາເນີນງານ, ແລະທໍາລາຍການຕິດຕັ້ງຂອງທ່ານ. ເນະນໍາໃຫ້ເປີດນໍາໃຊ້ ການກໍານົດເວລາ.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "PHP ຂອງທ່ານບໍ່ໄດ້ຮັບການສະຫນັບສະຫນູນ FreeType, ເຮັດໃຫ້ຮູບພາບໜ້າປົກຄວາມຄົມຊັດບໍ່ລະອຽດ ລວມທັງບັນຫາ ການຕັ້ງຄ່າ interface.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "ບໍ່ມີຊື່ index \"{indexName}\" ໃນຕາຕະລາງ \"{tableName}\".", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "ຖານຂໍ້ມູນແມ່ນຂາດບາງ columns ທາງເລືອກ. ເນື່ອງຈາກວ່າການເພີ່ມ columns ໃສ່ ຕາຕະລາງໃຫຍ່ ອາດ ຈະ ໃຊ້ເວລາດົນ ທີ່ບໍ່ໄດ້ຕື່ມໂດຍອັດຕະໂນມັດ ເມື່ອເລືອກ ໄດ້ . ໂດຍການດຳ \"occ db:add-missing-columns\" columns ທີ່ຂາດໄປສາມາດເພີ່ມໄດ້ດ້ວຍມືໃນຂະນະທີ່ຕົວຢ່າງຍັງດໍາເນີນການຕໍ່ໄປ. ເມື່ອມີການເພີ່ມ columns ອາດຈະປັບປຸງການຕອບສະຫນອງ ຫຼື ການໃຊ້ງານ.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "ຕົວຢ່າງເເນະນຳຂາດໂມດູນ PHP, ສໍາລັບການປັບປຸງ ແລະ ການປະຕິບັດທີ່ດີກວ່າ ນັ້ນ ແມ່ນແນະນໍາໃຫ້ຕິດຕັ້ງ ", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "ໂມດູນ php-imagick ໃນກໍລະນີນີ້ບໍ່ມີການສະຫນັບສະຫນູນ SVG. ເພື່ອຄວາມສອດຄ່ອງທີ່ດີກວ່າແມ່ນແນະນໍາໃຫ້ຕິດຕັ້ງ.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "ບາງຄໍລໍາໃນຖານຂໍ້ມູນແມ່ນຂາດການປ່ຽນ ໂຕແປໃຫຍ່ ໃຫຍ່ . ເນື່ອງຈາກວ່າການປ່ຽນ ແປງແບບ column ໃນຕາຕະລາງ ອາດຈະໃຊ້ ເວລາດົນ ທີ່ພວກເຂົາເຈົ້າບໍ່ໄດ້ ປ່ຽນແປງ ໂດຍອັດຕະໂນມັດ . ໂດຍການແລ່ນ 'occ db:convert-filecache-bigint' ຜຸ້ທີ່ກໍາລັງປ່ຽນແປງທີ່ກໍາລັງຄ້າງສາມາດນໍາໃຊ້ໄດ້ດ້ວຍມື. ການດໍາເນີນງານນີ້ຈໍາເປັນຕ້ອງໄດ້ ເຮັດ ໃນຂະນະທີ່ຕົວຢ່າງແມ່ນ offline . ສໍາລັບລາຍລະອຽດເພີ່ມເຕີມອ່ານ {linkstart}ຫນ້າເອກະສານກ່ຽວ ກັບ ↗{linkend} ນີ້.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite ກໍາລັງຖືກນໍາໃຊ້ເປັນຖານຂໍ້ມູນbackend. ສໍາລັບການຕິດຕັ້ງທີ່ໃຫຍ່ກວ່າ ພວກເຮົາຂໍແນະນໍາໃຫ້ທ່ານປ່ຽນໄປຫາ backend ຖານຂໍ້ມູນທີ່ແຕກຕ່າງ ກັນ .", "This is particularly recommended when using the desktop client for file synchronisation." : "ແນະນໍາໂດຍສະເພາະເມື່ອການນໍາໃຊ້ desktop ລູກຄ້າ ສໍາລັບການ synchronisation ຟາຍ", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "ເພື່ອຍົກຍ້າຍໄປຖານຂໍ້ມູນອື່ນໃຊ້ເຄື່ອງມືຄໍາສັ່ງ: 'occ db:convert-type', ຫຼື ເບິ່ງເອກະສານ {linkstart}↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "ຂີດຈໍາກັດຄວາມຈໍາ PHP ແມ່ນຕ່ໍາກວ່າຄ່າທີ່ແນະນໍາຂອງ 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "ຊອບແວບາງຢ່າງ ເປັນຜູ້ ໃຊ້ ທີ່ແຕກຕ່າງຈາກເວັບໄຊ . ນີ້ອາດຈະເປັນກໍລະນີຖ້າຫາກມີການຕິດຕັ້ງແອັບພລິເຄຊັນດ້ວຍມື. ກວດສອບການອະນຸຍາດຂອງແອັບພລິເຄຊັນດັ່ງຕໍ່ໄປນີ້:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL ຖືກນໍາໃຊ້ເປັນຖານຂໍ້ມູນແຕ່ບໍ່ສະຫນັບສະຫນູນຕົວອັກສອນ 4 byte. ເພື່ອ ໃຫ້ ສາມາດຮັບ 4-byteໄດ້(ເຊັ່ນ emojis) ໂດຍບໍ່ມີບັນຫາໃນຊື່ຟາຍ ຫຼື ຄໍາ ເຫັນຍົກຕົວຢ່າງ ແນະນໍາໃຫ້ ເຮັດໃຫ້ ການສະຫນັບສະຫນູນ 4 byte ໃນ MySQL . ສໍາ ລັບ ລາຍ ລະ ອຽດ ເພີ່ມ ເຕີມ ອ່ານ {linkstart} ຫນ້າ ເອກະ ສານ ກ່ຽວ ກັບ ↗{linkend} ນີ້.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "ຕົວຢ່າງນີ້ໃຊ້ S3 ເປັນການເກັບກໍາຂໍ້ມູນຕົ້ນຕໍ. ຟາຍອັບໂຫຼດໄດ້ເກັບ ໄວ້ ຊົ່ວ ຄາວ ຢູ່ ໃນ server ແລະ ດັ່ງນັ້ນຈຶ່ງແນະນໍາໃຫ້ມີ ພຶນທີ່ວ່າງ 50 GB ໃນ directory temp ຂອງ PHP . ກວດເບິ່ງບັນຊີລາຍລະອຽດກ່ຽວກັບຊ່ອງທາງ ແລະ ພຶນທີ່ວ່າງ . ເພື່ອປັບປຸງກະລຸນາປ່ຽນ directory ຊົ່ວຄາວໃນ php.ini ຫຼື ເຮັດໃຫ້ມີຊ່ອງຫວ່າງຫຼາຍຂຶ້ນໃນຊ່ອງທາງນັ້ນ.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "ທ່ານກໍາລັງເຂົ້າເຖິງຕົວຢ່າງຂອງທ່ານ ກ່ຽວກັບການຕິດຕໍ່ທີ່ປອດໄພ , ເຖິງຢ່າງໃດ ກໍ ຕາມ ຕົວຢ່າງຂອງ ທ່ານແມ່ນການສ້າງ URLs ບໍ່ ຫມັ້ນ ຄົງ . ຫມາຍຄວາມວ່າທ່ານຢູ່ເບື້ອງຫຼັງ proxy reverse ແລະ ຕົວປ່ຽນ config overwrite ບໍ່ໄດ້ຖືກກໍານົດຢ່າງຖືກຕ້ອງ. ກະລຸນາອ່ານ {linkstart}ຫນ້າເອກະສານກ່ຽວກັບ↗{linkend}.", "Error occurred while checking server setup" : "ເກີດຂໍ້ຜິດພາດໃນຂະນະທີ່ກວດສອບການຕັ້ງຄ່າ server", + "For more details see the {linkstart}documentation ↗{linkend}." : "ສໍາລັບລາຍລະອຽດເພີ່ມເຕີມເບິ່ງໃນ {linkstart}↗{linkend} ເອກະສານ", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "ຊອບແວຂໍ້ມູນ ແລະ ຟາຍ ຂອງ ທ່ານ ອາດ ຈະ ສາ ມາດ ເຂົ້າ ເຖິງ ໄດ້ ຈາກ ອິນ ເຕີ ເນັດ . .ຟາຍ htaccess ບໍ່ ໄດ້ ເຮັດ ວຽກ . ແນະ ນໍາ ໃຫ້ ທ່ານ ຕັ້ງ ຄ່າ ເວັບ ໄຊ ຂອງ ທ່ານ ເພື່ອ ວ່າ ຂໍ້ ມູນໂດຍກົງ ບໍ່ ສາ ມາດ ເຂົ້າ ເຖິງ ໄດ້ ອີກ ຕໍ່ ໄປ , ຫຼື ການ ເຄື່ອນ ຍ້າຍຂໍ້ ມູນ ຢູ່ ນອກຮາກຖານຂອງເອກະ ສານ web server ໂດຍກົງ ", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "ຫົວຂໍ້ HTTP \"{header}\" ບໍ່ໄດ້ຖືກກໍານົດໃຫ້ \"{expected}\". ນີ້ແມ່ນຄວາມສ່ຽງດ້ານຄວາມປອດໄພ ຫຼື ຄວາມເປັນສ່ວນຕົວທີ່ອາດເປັນໄປໄດ້, ແນະນໍາໃຫ້ປັບການຕັ້ງຄ່ານີ້", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "ຫົວຂໍ້ HTTP \"{header}\" ບໍ່ໄດ້ຖືກກໍານົດໃຫ້ \"{expected}\". ບາງຄຸນລັກສະນະອາດຈະເຮັດວຽກບໍ່ຖືກຕ້ອງ , ແນະນໍາໃຫ້ປັບການຕັ້ງຄ່ານີ້ຕາມທີ່ວາງໄວ້.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "ຫົວຂໍ້ \"{header}\" HTTP ບໍ່ມີ \"{expected}\". ນີ້ແມ່ນຄວາມສ່ຽງດ້ານຄວາມປອດໄພ ຫຼືຄວາມເປັນສ່ວນຕົວ, ແນະນໍາໃຫ້ປັບການຕັ້ງຄ່າຕາມນີ້.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "ຫົວຂໍ້ \"{header}\" HTTP ບໍ່ໄດ້ຖືກກໍານົດໃຫ້ \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ຫຼື \"{val5}\". ສາມາດເຮັດໃຫ້ຂໍ້ມູນ referer ຮົ່ວ. ເບິ່ງຂໍ້ແນະນໍາ {linkstart}W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "ຫົວຂໍ້ \"Strict-Transport-Security\" HTTP ບໍ່ໄດ້ກໍານົດໄວ້ຢ່າງຫນ້ອຍ \"{seconds}\" ວິນາທີ. ສໍາລັບເພີ່ມຄວາມປອດໄພ, ແນະນໍາໃຫ້ເຮັດໃຫ້ HSTS ຕາມທີ່ໄດ້ບັນຍາຍໄວ້ໃນ{linkstart}↗{linkend}ຄໍາແນະນໍາຄວາມປອດໄພ ", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "ການເຂົ້າເຖິງເວັບໄຊບໍ່ປອດໄພຜ່ານ HTTP. ທ່ານໄດ້ ຮັບຄໍາແນະນໍາທີ່ ຈະ ຕັ້ງ server ຂອງທ່ານ ເພື່ອ ຮຽກໃຊ້ HTTPS ແທນ , ດັ່ງ ທີ່ ໄດ້ ບັນ ຍາຍ ໃນ {linkstart}↗{linkend} ຄໍາແນະນໍາຄວາມປອດໄພ .", "unknown text" : "ຂໍ້ຄວາມທີ່ບໍ່ຮູ້", "Hello world!" : "ສະບາຍດີ", "sunny" : "ມີເເດດ", diff --git a/core/l10n/nl.js b/core/l10n/nl.js index 6d6a3428aaa..7a74d045a2a 100644 --- a/core/l10n/nl.js +++ b/core/l10n/nl.js @@ -61,15 +61,27 @@ OC.L10N.register( "The following apps have been disabled: %s" : "De volgende apps zijn uitgeschakeld: %s", "Already up to date" : "Al bijgewerkt", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Je webserver is nog niet goed ingesteld voor bestandssynchronisatie, omdat de WebDAV interface niet goed lijkt te werken.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Je webserver is niet goed ingesteld om \"{url}\" te vinden. Meer informatie is te vinden in onze {linkstart}documentatie↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Je webserver is niet juist ingesteld voor het verwerken van \"{url}\". De oorzaak ligt waarschijnlijk bij de webserver configuratie die niet bijgewerkt is om deze map rechtstreeks beschikbaar te stellen. Vergelijk je configuratie tegen de installatieversie van de rewrite regels die je vindt in de \".htaccess\" bestanden voor Apache of met de voorbeelden in de documentatie voor Nginx die je vindt op de {linkstart}documentatie pagina↗{linkend}. Op Nginx beginnen deze regels meestal met \"location ~\" die je moet aanpassen.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "Je webserver is niet goed ingesteld om .woff2 bestanden af te leveren. Dit is meestal een probleem met de Nginx configuratie. Voor Nextcloud 15 moet die worden aangepast om ook .woff2 bestanden aan te kunnen. vergelijk jouw Nginx configuratie met de aanbevolen instellingen in onze {linkstart}documentatie ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP lijkt niet goed te zijn ingesteld voor opvragen systeemomgevingsvariabelen. De test met getenv(\"PATH\") gaf een leeg resultaat.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Lees de {linkstart}installatiedocumentatie ↗{linkend} voor php configuratienotities en de php configuratie van je server, zeker bij gebruik van php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "De alleen-lezen config is ingeschakeld. Dit voorkomt het via de webinterface wijzigen van verschillende instellingen. Bovendien moet het bestand voor elke aanpassing handmatig op beschrijfbaar worden ingesteld.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Je database draait niet met \"READ COMMITTED\" transactie-isolatie niveau. Dit kan problemen opleveren als er meerdere acties tegelijkertijd worden uitgevoerd.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "De PHP module \"fileinfo\" ontbreekt. We adviseren met klem om deze module te activeren om de beste resultaten te bereiken voor MIME-type detectie.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "Transactionele bestandlocking is gedeactiveerd, dat zou kunnen leiden tot versiebeheerproblemen. Schakel \"filelocking enabled\" in config.php in om deze problemen te voorkomen. Zie de {linkstart}documentatie ↗{linkend} voor meer informatie.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Als je installatie niet in de hoofddirectory van het domein staat, maar wel systeem cron gebruikt, dan kunnen er problemen ontstaan bij het genereren van URL's. Om deze problemen te voorkomen zou je de \"overwrite.cli.url\" optie in config.php moeten instellen op het webroot pad van je installatie (aanbevolen:\"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "Je installatie heeft geen standaard telefoonregio. Dit is nodig om telefoonnummers te valideren in de profielinstellingen zonder landcode. Om nummers zonder landcode toe te staan, voeg je \"default_phone_region\" met de respectieve {linkstart} ISO 3166-1-code ↗ {linkend} van de regio toe aan je configuratiebestand.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Het was niet mogelijk om de systeem cron via CLI uit te voeren. De volgende technische problemen traden op:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Deze server heeft geen werkende internetverbinding: meerdere endpoints kunnen niet worden bereikt. Dat betekent dat sommige functies, zoals het gebruik van externe opslag, notificaties over updates of installatie van apps van derde partijen niet werken. Ook het benaderen van bestanden vanaf een remote locatie en het versturen van notificatie emails kan mislukken. We adviseren om de internetverbinding voor deze server in te schakelen als je alle functies wilt gebruiken.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Er is geen geheugencache geconfigureerd. Om de prestaties te verhogen kun je de memcache configureren als die beschikbaar is. Meer informatie vind je in onze {linkstart}documentatie ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Geen bruikbare bron voor willekeurige waarden gevonden door PHP, hetgeen sterk wordt aanbevolen om beveiligingsredenen. Meer informatie in de {linkstart}documentatie↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Je draait momenteel PHP {version}. We adviseren je om, zo gauw je distributie dat biedt, je PHP versie bij te werken voor betere {linkstart}prestaties en beveiliging geleverd door de PHP Group↗{linkend}.", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 is de laatste release met ondersteuning voor PHP 7.2. Nextcloud 21 heeft minstens PHP 7.3 nodig.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "De reverse proxy headerconfiguratie is onjuist, of je hebt toegang tot Nextcloud via een vertrouwde proxy. Als je Nextcloud niet via een vertrouwde proxy benadert, dan levert dat een beveiligingsrisico op, waardoor een aanvaller het IP-adres dat Nextcloud ziet kan vervalsen. Meer informatie is te vinden in onze {linkstart}documentatie ↗{linkend}..", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached is geconfigureerd als gedistribueerde cache, maar de verkeerde PHP-module \"memcache\" is geïnstalleerd. \\OC\\Memcache\\Memcached ondersteunt alleen \"memcached\" en niet \"memcache\". Zie de {linkstart}memcached wiki over beide modules ↗ {linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Sommige bestanden hebben de integriteitscontrole niet doorstaan. Meer informatie over het oplossen van dit probleem is te vinden in de {linkstart1} documentatie ↗ {linkend}. ({linkstart2} Lijst met ongeldige bestanden… {linkend} / {linkstart3} Opnieuw scannen… {linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "De PHP OPcache is niet geladen. {linkstart}Voor betere prestaties adviseren we ↗{linkend} die te laden in je php.ini instellingen.", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "De PHP functie \"set_time_limit\" is niet beschikbaar. Dit kan erin resulteren dat de scripts halverwege stoppen, waardoor de installatie ontregeld raakt. We adviseren sterk om deze functie in te schakelen.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Je PHP heeft geen FreeType ondersteuning. Dit zal leiden tot verminkte profielafbeeldingen en instellingeninterface.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Ontbrekende index \"{indexName}\" in tabel \"{tableName}\".", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "De database mist een paar optionele kolommen. Omdat het toevoegen van kolommen op grote tabellen veel tijd kan kosten, zijn ze niet automatisch gecreëerd, omdat dat optioneel kan. Door het draaien van \"occ db:add-missing-columns\" kunnen deze kolommen handmatig worden toegevoegd terwijl de server blijft draaien. Als de kolommen zijn toegevoegd, zullen bepaalde functionaliteiten veel sneller of gemakkelijker plaatsvinden.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Deze server mist een paar aanbevolen PHP-modules. Voor betere prestaties en compatibiliteit adviseren we om die te installeren.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Module php-imagick op deze server heeft geen SVG-ondersteuning. Voor een betere compatibiliteit wordt aanbevolen om die te installeren.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Sommige kolommen in de database zijn niet geconverteerd naar 'big int'. Doordat het wijzigen van kolomtype op grote databases veel tijd kost, zijn ze niet automatisch gewijzigd. Door het uitvoeren van 'occ db:convert-filecache-bigint' worden de veranderingen alsnog uitgevoerd. Dat moet gebeuren als de server off-line staat. Voor meer informatie verwijzen we naar {linkstart}de documentatie hierover ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wordt momenteel gebruikt als backend database. Voor grotere installaties adviseren we dat je omschakelt naar een andere database backend.", "This is particularly recommended when using the desktop client for file synchronisation." : "Dit wordt vooral aanbevolen als de desktop client wordt gebruikt voor bestandssynchronisatie.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Om te migreren naar een andere database moet u de commandoregel tool gebruiken: 'occ db:convert-type', of lees de {linkstart} documentatie ↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "De PHP geheugenlimiet is onder de aanbevolen waarde van 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Sommige app directories zijn eigendom van een andere gebruiker dan de webserver . Dat kan het geval zijn als apps handmatig zijn geïnstalleerd. Controleer de permissies van de volgende app directories:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL is in gebruik als database maar deze ondersteunt geen lettertekens van 4 bytes. Om 4-byte lettertekens te ondersteunen (bv. voor emojis) zonder dat dit problemen veroorzaakt bij bestandsnamen of commentaren enz. is het aangeraden om 4-byte letterteken ondersteuning in MySQL te activeren. Voor meer details {linkstart}lees de documentatie hierover ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Deze installatie gebruikt een S3-gebaseerde object opslag als primaire opslag. De ge-uploade bestanden worden tijdelijk op de server opgeslagen en daarom is het aangeraden om minimaal 50GB vrije ruimte in de temp directory van PHP te hebben. Check de logs voor de complete details van het pad en de beschikbare ruimte. Om dit te verbeteren, verander de tijdelijke directory in php.ini of maak meer ruimte beschikbaar in het genoemde pad.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Je verbindt met je server over een beveiligd kanaal, maar je server genereert onveilige URLs. Waarschijnlijk zit je achter een reverse proxy en zijn de overschijf config variabelen niet goed ingesteld. Lees [linkstart]de documentatie hierover ↗{linkend}.", "Error occurred while checking server setup" : "Een fout trad op bij checken serverconfiguratie", + "For more details see the {linkstart}documentation ↗{linkend}." : "Voor meer informatie word je verwezen naar de {linkstart}documentatie↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Je datamap en je bestanden zijn waarschijnlijk vanaf het internet bereikbaar. Het .htaccess-bestand werkt niet. We raden ten zeerste aan aan om je webserver zodanig te configureren, dat de datadirectory niet bereikbaar is vanaf het internet of om je datadirectory te verplaatsen naar een locatie buiten de document-root van de webserver.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "De \"{header}\" HTTP header is niet ingesteld als \"{expected}\". Dit is een potentieel security of privacy risico en we adviseren om deze instelling te wijzigen.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "De \"{header}\" HTTP header is ingesteld als \"{expected}\". Sommige functies werken mogelijk niet zoals bedoeld en we adviseren om deze instelling te wijzigen.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "De \"{header}\" HTTP header bevat niet \"{expected}\". Dit is een potentieel security of privacy risico en we adviseren om deze instelling te wijzigen.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "De \"{header}\" HTTP header is niet ingesteld op \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" of \"{val5}\". Hierdoor kan verwijzingsinformatie uitlekken. Zie de {linkstart}W3C aanbeveling ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "De \"Strict-Transport-Security\" HTTP header is niet ingesteld als minimaal \"{seconds}\" seconden. Voor verbeterde beveiliging adviseren we HSTS in te schakelen zoals beschreven in de {linkstart}security tips ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "De site is onveilig verbonden over HTTP. We adviseren je dringend om je server zo te configureren dat HTTPS wordt vereist, zoals beschreven in de {linkstart}security tips ↗{linkend}.", "unknown text" : "onbekende tekst", "Hello world!" : "Hallo wereld!", "sunny" : "zonnig", diff --git a/core/l10n/nl.json b/core/l10n/nl.json index e54b442399f..4692b577ba6 100644 --- a/core/l10n/nl.json +++ b/core/l10n/nl.json @@ -59,15 +59,27 @@ "The following apps have been disabled: %s" : "De volgende apps zijn uitgeschakeld: %s", "Already up to date" : "Al bijgewerkt", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Je webserver is nog niet goed ingesteld voor bestandssynchronisatie, omdat de WebDAV interface niet goed lijkt te werken.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Je webserver is niet goed ingesteld om \"{url}\" te vinden. Meer informatie is te vinden in onze {linkstart}documentatie↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Je webserver is niet juist ingesteld voor het verwerken van \"{url}\". De oorzaak ligt waarschijnlijk bij de webserver configuratie die niet bijgewerkt is om deze map rechtstreeks beschikbaar te stellen. Vergelijk je configuratie tegen de installatieversie van de rewrite regels die je vindt in de \".htaccess\" bestanden voor Apache of met de voorbeelden in de documentatie voor Nginx die je vindt op de {linkstart}documentatie pagina↗{linkend}. Op Nginx beginnen deze regels meestal met \"location ~\" die je moet aanpassen.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "Je webserver is niet goed ingesteld om .woff2 bestanden af te leveren. Dit is meestal een probleem met de Nginx configuratie. Voor Nextcloud 15 moet die worden aangepast om ook .woff2 bestanden aan te kunnen. vergelijk jouw Nginx configuratie met de aanbevolen instellingen in onze {linkstart}documentatie ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP lijkt niet goed te zijn ingesteld voor opvragen systeemomgevingsvariabelen. De test met getenv(\"PATH\") gaf een leeg resultaat.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Lees de {linkstart}installatiedocumentatie ↗{linkend} voor php configuratienotities en de php configuratie van je server, zeker bij gebruik van php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "De alleen-lezen config is ingeschakeld. Dit voorkomt het via de webinterface wijzigen van verschillende instellingen. Bovendien moet het bestand voor elke aanpassing handmatig op beschrijfbaar worden ingesteld.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Je database draait niet met \"READ COMMITTED\" transactie-isolatie niveau. Dit kan problemen opleveren als er meerdere acties tegelijkertijd worden uitgevoerd.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "De PHP module \"fileinfo\" ontbreekt. We adviseren met klem om deze module te activeren om de beste resultaten te bereiken voor MIME-type detectie.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "Transactionele bestandlocking is gedeactiveerd, dat zou kunnen leiden tot versiebeheerproblemen. Schakel \"filelocking enabled\" in config.php in om deze problemen te voorkomen. Zie de {linkstart}documentatie ↗{linkend} voor meer informatie.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Als je installatie niet in de hoofddirectory van het domein staat, maar wel systeem cron gebruikt, dan kunnen er problemen ontstaan bij het genereren van URL's. Om deze problemen te voorkomen zou je de \"overwrite.cli.url\" optie in config.php moeten instellen op het webroot pad van je installatie (aanbevolen:\"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "Je installatie heeft geen standaard telefoonregio. Dit is nodig om telefoonnummers te valideren in de profielinstellingen zonder landcode. Om nummers zonder landcode toe te staan, voeg je \"default_phone_region\" met de respectieve {linkstart} ISO 3166-1-code ↗ {linkend} van de regio toe aan je configuratiebestand.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Het was niet mogelijk om de systeem cron via CLI uit te voeren. De volgende technische problemen traden op:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Deze server heeft geen werkende internetverbinding: meerdere endpoints kunnen niet worden bereikt. Dat betekent dat sommige functies, zoals het gebruik van externe opslag, notificaties over updates of installatie van apps van derde partijen niet werken. Ook het benaderen van bestanden vanaf een remote locatie en het versturen van notificatie emails kan mislukken. We adviseren om de internetverbinding voor deze server in te schakelen als je alle functies wilt gebruiken.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Er is geen geheugencache geconfigureerd. Om de prestaties te verhogen kun je de memcache configureren als die beschikbaar is. Meer informatie vind je in onze {linkstart}documentatie ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Geen bruikbare bron voor willekeurige waarden gevonden door PHP, hetgeen sterk wordt aanbevolen om beveiligingsredenen. Meer informatie in de {linkstart}documentatie↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Je draait momenteel PHP {version}. We adviseren je om, zo gauw je distributie dat biedt, je PHP versie bij te werken voor betere {linkstart}prestaties en beveiliging geleverd door de PHP Group↗{linkend}.", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 is de laatste release met ondersteuning voor PHP 7.2. Nextcloud 21 heeft minstens PHP 7.3 nodig.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "De reverse proxy headerconfiguratie is onjuist, of je hebt toegang tot Nextcloud via een vertrouwde proxy. Als je Nextcloud niet via een vertrouwde proxy benadert, dan levert dat een beveiligingsrisico op, waardoor een aanvaller het IP-adres dat Nextcloud ziet kan vervalsen. Meer informatie is te vinden in onze {linkstart}documentatie ↗{linkend}..", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached is geconfigureerd als gedistribueerde cache, maar de verkeerde PHP-module \"memcache\" is geïnstalleerd. \\OC\\Memcache\\Memcached ondersteunt alleen \"memcached\" en niet \"memcache\". Zie de {linkstart}memcached wiki over beide modules ↗ {linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Sommige bestanden hebben de integriteitscontrole niet doorstaan. Meer informatie over het oplossen van dit probleem is te vinden in de {linkstart1} documentatie ↗ {linkend}. ({linkstart2} Lijst met ongeldige bestanden… {linkend} / {linkstart3} Opnieuw scannen… {linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "De PHP OPcache is niet geladen. {linkstart}Voor betere prestaties adviseren we ↗{linkend} die te laden in je php.ini instellingen.", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "De PHP functie \"set_time_limit\" is niet beschikbaar. Dit kan erin resulteren dat de scripts halverwege stoppen, waardoor de installatie ontregeld raakt. We adviseren sterk om deze functie in te schakelen.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Je PHP heeft geen FreeType ondersteuning. Dit zal leiden tot verminkte profielafbeeldingen en instellingeninterface.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Ontbrekende index \"{indexName}\" in tabel \"{tableName}\".", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "De database mist een paar optionele kolommen. Omdat het toevoegen van kolommen op grote tabellen veel tijd kan kosten, zijn ze niet automatisch gecreëerd, omdat dat optioneel kan. Door het draaien van \"occ db:add-missing-columns\" kunnen deze kolommen handmatig worden toegevoegd terwijl de server blijft draaien. Als de kolommen zijn toegevoegd, zullen bepaalde functionaliteiten veel sneller of gemakkelijker plaatsvinden.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Deze server mist een paar aanbevolen PHP-modules. Voor betere prestaties en compatibiliteit adviseren we om die te installeren.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Module php-imagick op deze server heeft geen SVG-ondersteuning. Voor een betere compatibiliteit wordt aanbevolen om die te installeren.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Sommige kolommen in de database zijn niet geconverteerd naar 'big int'. Doordat het wijzigen van kolomtype op grote databases veel tijd kost, zijn ze niet automatisch gewijzigd. Door het uitvoeren van 'occ db:convert-filecache-bigint' worden de veranderingen alsnog uitgevoerd. Dat moet gebeuren als de server off-line staat. Voor meer informatie verwijzen we naar {linkstart}de documentatie hierover ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wordt momenteel gebruikt als backend database. Voor grotere installaties adviseren we dat je omschakelt naar een andere database backend.", "This is particularly recommended when using the desktop client for file synchronisation." : "Dit wordt vooral aanbevolen als de desktop client wordt gebruikt voor bestandssynchronisatie.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Om te migreren naar een andere database moet u de commandoregel tool gebruiken: 'occ db:convert-type', of lees de {linkstart} documentatie ↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "De PHP geheugenlimiet is onder de aanbevolen waarde van 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Sommige app directories zijn eigendom van een andere gebruiker dan de webserver . Dat kan het geval zijn als apps handmatig zijn geïnstalleerd. Controleer de permissies van de volgende app directories:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL is in gebruik als database maar deze ondersteunt geen lettertekens van 4 bytes. Om 4-byte lettertekens te ondersteunen (bv. voor emojis) zonder dat dit problemen veroorzaakt bij bestandsnamen of commentaren enz. is het aangeraden om 4-byte letterteken ondersteuning in MySQL te activeren. Voor meer details {linkstart}lees de documentatie hierover ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Deze installatie gebruikt een S3-gebaseerde object opslag als primaire opslag. De ge-uploade bestanden worden tijdelijk op de server opgeslagen en daarom is het aangeraden om minimaal 50GB vrije ruimte in de temp directory van PHP te hebben. Check de logs voor de complete details van het pad en de beschikbare ruimte. Om dit te verbeteren, verander de tijdelijke directory in php.ini of maak meer ruimte beschikbaar in het genoemde pad.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Je verbindt met je server over een beveiligd kanaal, maar je server genereert onveilige URLs. Waarschijnlijk zit je achter een reverse proxy en zijn de overschijf config variabelen niet goed ingesteld. Lees [linkstart]de documentatie hierover ↗{linkend}.", "Error occurred while checking server setup" : "Een fout trad op bij checken serverconfiguratie", + "For more details see the {linkstart}documentation ↗{linkend}." : "Voor meer informatie word je verwezen naar de {linkstart}documentatie↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Je datamap en je bestanden zijn waarschijnlijk vanaf het internet bereikbaar. Het .htaccess-bestand werkt niet. We raden ten zeerste aan aan om je webserver zodanig te configureren, dat de datadirectory niet bereikbaar is vanaf het internet of om je datadirectory te verplaatsen naar een locatie buiten de document-root van de webserver.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "De \"{header}\" HTTP header is niet ingesteld als \"{expected}\". Dit is een potentieel security of privacy risico en we adviseren om deze instelling te wijzigen.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "De \"{header}\" HTTP header is ingesteld als \"{expected}\". Sommige functies werken mogelijk niet zoals bedoeld en we adviseren om deze instelling te wijzigen.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "De \"{header}\" HTTP header bevat niet \"{expected}\". Dit is een potentieel security of privacy risico en we adviseren om deze instelling te wijzigen.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "De \"{header}\" HTTP header is niet ingesteld op \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" of \"{val5}\". Hierdoor kan verwijzingsinformatie uitlekken. Zie de {linkstart}W3C aanbeveling ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "De \"Strict-Transport-Security\" HTTP header is niet ingesteld als minimaal \"{seconds}\" seconden. Voor verbeterde beveiliging adviseren we HSTS in te schakelen zoals beschreven in de {linkstart}security tips ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "De site is onveilig verbonden over HTTP. We adviseren je dringend om je server zo te configureren dat HTTPS wordt vereist, zoals beschreven in de {linkstart}security tips ↗{linkend}.", "unknown text" : "onbekende tekst", "Hello world!" : "Hallo wereld!", "sunny" : "zonnig", diff --git a/core/l10n/pl.js b/core/l10n/pl.js index 756c4a1ceef..150cafcf535 100644 --- a/core/l10n/pl.js +++ b/core/l10n/pl.js @@ -61,15 +61,27 @@ OC.L10N.register( "The following apps have been disabled: %s" : "Następujące aplikacje zostały wyłączone: %s", "Already up to date" : "Już zaktualizowano", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Serwer WWW nie jest jeszcze na tyle poprawnie skonfigurowany, aby umożliwić synchronizację plików, ponieważ interfejs WebDAV może być uszkodzony.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Serwer WWW nie jest prawidłowo skonfigurowany do rozwiązania problemu z \"{url}\". Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Serwer WWW nie został poprawnie skonfigurowany do rozwiązania problemu z \"{url}\". Jest to najprawdopodobniej związane z konfiguracją serwera, który nie został zaktualizowany do bezpośredniego dostępu tego katalogu. Proszę porównać swoją konfigurację z dostarczonymi regułami przepisywania w \".htaccess\" dla Apache lub podanymi w dokumentacji dla Nginx na {linkstart}stronie dokumentacji ↗{linkend}. W Nginx są to zazwyczaj linie zaczynające się od \"location ~\", które wymagają aktualizacji.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "Serwer WWW nie został poprawnie skonfigurowany do dostarczania plików .woff2. Zazwyczaj jest to problem z konfiguracją Nginx. Dla Nextcloud 15 wymagane jest dostosowanie jej, aby dostarczać pliki .woff2. Porównaj swoją konfigurację Nginx z zalecaną konfiguracją w naszej {linkstart}dokumentacji ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Wygląda na to, że PHP nie jest poprawnie skonfigurowany do wysyłania zapytań o zmienne środowiskowe systemu. Test gentenv(\"PATH\") zwraca tylko pustą wartość.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Sprawdź {linkstart}dokumentację instalacji ↗{linkend}, aby znaleźć uwagi dotyczące konfiguracji PHP i konfiguracji PHP serwera, zwłaszcza jeśli używasz php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Włączono konfigurację tylko do odczytu. Zapobiega to ustawianiu niektórych konfiguracji przez interfejs internetowy. Ponadto plik musi być zapisany ręcznie przy każdej aktualizacji.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Baza danych nie działa z poziomem izolacji transakcji \"READ COMMITTED\". Może to powodować problemy, gdy wiele akcji jest wykonywanych równolegle.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Brak modułu PHP 'fileinfo'. Zdecydowanie zaleca się, aby ten moduł mógł uzyskać najlepsze wyniki przy wykrywaniu typu MIME.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "Transakcyjne blokowanie plików jest wyłączone, co może powodować problemy w działaniu. Włącz \"filelocking.enabled\" w config.php, aby rozwiązać je. Więcej informacji znajdziesz w {linkstart}dokumentacji ↗{linkend}.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Jeśli instalacja nie jest zainstalowana w katalogu głównym domeny i używa systemu Cron, mogą wystąpić problemy z generowaniem adresu URL. Aby uniknąć tych problemów, ustaw opcję \"overwrite.cli.url\" w pliku config.php na ścieżkę do katalogu głównego instalacji (sugestia: \"{suggestedOverwriteCliURL}\").", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "Twoja instalacja nie ma ustawionego domyślnego regionu telefonu. Jest to wymagane do weryfikacji numerów telefonów w ustawieniach profilu bez kodu kraju. Aby zezwolić na numery bez kodu kraju, dodaj \"default_phone_region\" z odpowiednim {linkstart}kodem ISO 3166-1 ↗{linkend} regionu do pliku konfiguracyjnego.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nie można było wykonać zadania cron przez CLI. Pojawiły się następujące błędy techniczne:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Serwer nie ma aktywnego połączenia z Internetem. Wiele połączeń nie może być zrealizowanych. Oznacza to, że część funkcji takich jak zewnętrzny magazyn, powiadomienia o aktualizacjach lub instalacja aplikacji firm trzecich nie będą działać. Dostęp zdalny do plików oraz wysyłanie powiadomień e-mailowych również może nie działać. Nawiąż połączenie z tego serwera do Internetu, aby korzystać ze wszystkich funkcji.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nie skonfigurowano pamięci podręcznej. Aby zwiększyć wydajność, skonfiguruj memcache, jeśli jest dostępne. Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nie znaleziono odpowiedniego źródła przypadkowości przez PHP. Jest to bardzo niezalecane w związku z bezpieczeństwem. Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Aktualnie używasz PHP {version}. Zaktualizuj swoją wersję PHP korzystając z {linkstart}aktualizacji wydajności i bezpieczeństwa zapewniane przez grupę PHP ↗{linkend}, gdy tylko dystrybucja zacznie je obsługiwać.", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 to ostatnie wydanie obsługujące PHP 7.2. Nextcloud 21 wymaga co najmniej PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Konfiguracja nagłówka reverse proxy jest niepoprawna lub uzyskujesz dostęp do Nextcloud z zaufanego serwera proxy. Jeśli tak nie jest, to jest to problem bezpieczeństwa i może pozwolić atakującemu na sfałszowanie adresu IP jako widocznego dla Nextcloud. Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached jest skonfigurowany jako rozproszona pamięć podręczna, ale moduł PHP \"memcache\" jest zainstalowany niewłaściwy. \\OC\\Memcache\\Memcached obsługuje tylko \"memcached\", a nie \"memcache\". Zobacz {linkstart}memcached wiki o obu modułach ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Niektóre pliki nie przeszły sprawdzenia integralności. Więcej informacji na temat rozwiązania tego problemu można znaleźć w {linkstart1}dokumentacji ↗{linkend}. ({linkstart2}Lista niepoprawnych plików…{linkend}/{linkstart3}Skanuj ponownie…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "Moduł PHP OPcache nie jest załadowany. {linkstart}Dla lepszej wydajności zaleca się ↗{linkend} załadowanie go w instalacji PHP.", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "Funkcja PHP \"set_time_limit\" nie jest dostępna. Może to spowodować zatrzymanie skryptów w trakcie wykonywania, przerywając instalację. Zdecydowanie zaleca się włączenie tej funkcji.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Twoje PHP nie posiada wsparcia dla FreeType, co powoduje problemy ze zdjęciami profilowymi i interfejsem ustawień.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Brak indeksu \"{indexName}\" w tabeli \"{tableName}\".", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "W bazie danych brakuje niektórych opcjonalnych kolumn. Ze względu na fakt, że dodawanie kolumn do dużych tabel może zająć trochę czasu oraz mogą one być opcjonalne, nie zostały dodane automatycznie. Brakujące kolumny można dodać ręcznie w trakcie pracy instancji uruchamiając \"occ db:add-missing-columns\". Po dodaniu kolumn niektóre funkcje mogą poprawić czas reakcji lub użyteczność.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "W tej instancji brakuje niektórych zalecanych modułów PHP. W celu zwiększenia wydajności i lepszej kompatybilności zaleca się ich instalację.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Moduł php-imagick w tej instancji nie obsługuje formatu SVG. Aby uzyskać lepszą kompatybilność, zaleca się jego zainstalowanie.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Niektóre kolumny w bazie danych nie zawierają konwersji do big integers. Ze względu na to, że zmiana typów kolumn w dużych tabelach może zająć dużo czasu, nie zostały one zmienione automatycznie. Oczekujące zmiany można wykonać ręcznie, uruchamiając 'occ db:convert-filecache-bigint'. Ta operacja musi zostać wykonana, gdy instancja jest w trybie offline. Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite jest aktualnie używany jako baza danych. Dla większych instalacji zalecamy przełączenie na inną bazę danych.", "This is particularly recommended when using the desktop client for file synchronisation." : "Jest to szczególnie zalecane podczas używania klienta desktopowego do synchronizacji plików.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Aby przeprowadzić migrację do innej bazy danych, użyj narzędzia wiersza poleceń: 'occ db:convert-type' lub zapoznaj się z {linkstart}dokumentacją ↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "Limit pamięci PHP jest poniżej zalecanej wartości 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Niektóre katalogi aplikacji są własnością innego użytkownika tego serwera WWW. Może to wystąpić, gdy aplikacje zostały zainstalowane ręcznie. Sprawdź uprawnienia poniższych katalogów:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL jest używany jako baza danych, ale nie obsługuje znaków 4-bajtowych. Aby korzystać ze znaków 4-bajtowych w nazwach plików lub komentarzach (np. Emoji), zaleca się włączenie tej obsługi w MySQL. Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Ta aplikacja używa magazynu obiektów opartych na S3, jako magazynu podstawowego. Przesyłane pliki są tymczasowo przechowywane na serwerze, dlatego zalecane jest posiadanie 50 GB wolnego miejsca w katalogu tymczasowym PHP. Sprawdź logi, aby uzyskać pełne informacje o ścieżce i dostępnym miejscu. Aby to umożliwić, należy zmienić katalog tymczasowy w pliku php.ini lub udostępnić więcej miejsca dla tej ścieżki.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Dostęp do instancji odbywa się za pośrednictwem bezpiecznego połączenia, natomiast instancja generuje niezabezpieczone adresy URL. Najprawdopodobniej oznacza to, że jesteś za odwrotnym proxy, a zastępowanie zmiennych konfiguracji nie jest ustawione poprawnie. Przeczytaj o tym na {linkstart}stronie dokumentacji ↗{linkend}.", "Error occurred while checking server setup" : "Wystąpił błąd podczas sprawdzania konfiguracji serwera", + "For more details see the {linkstart}documentation ↗{linkend}." : "Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Twój katalog danych i pliki są prawdopodobnie dostępne przez Internet. Plik .htaccess nie działa. Zdecydowanie zaleca się skonfigurowanie serwera WWW w taki sposób, aby katalog danych nie był już dostępny, albo przenieś katalog danych poza główny katalog serwera WWW.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "Nagłówek HTTP \"{header}\" nie jest ustawiony na \"{expected}\". Jest to potencjalne zagrożenie dla bezpieczeństwa lub prywatności. Dlatego zaleca się odpowiednie dostosowanie tego ustawienia.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "Nagłówek HTTP \"{header}\" nie jest ustawiony na \"{expected}\". Niektóre funkcje mogą nie działać poprawnie. Dlatego zaleca się odpowiednie dostosowanie tego ustawienia.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "Nagłówek HTTP \"{header}\" nie zawiera \"{expected}\". Jest to potencjalne zagrożenie dla bezpieczeństwa lub prywatności. Dlatego zaleca się odpowiednie dostosowanie tego ustawienia.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "Nagłówek HTTP \"{header}\" nie jest ustawiony na \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" lub \"{val5}\". Może to spowodować wyciek informacji o stronie odsyłającej. Zobacz {linkstart}rekomendację W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "Nagłówek HTTP \"Strict-Transport-Security\" nie jest ustawiony na co najmniej \"{seconds}\" sekund. W celu zwiększenia bezpieczeństwa zaleca się włączenie HSTS w sposób opisany w {linkstart}poradach bezpieczeństwa ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Dostęp do tej strony jest za pośrednictwem protokołu HTTP. Zaleca się skonfigurowanie serwera tak, aby wymagał HTTPS, zgodnie z opisem w {linkstart}poradach bezpieczeństwa ↗{linkend}.", "unknown text" : "nieznany tekst", "Hello world!" : "Witaj świecie!", "sunny" : "słoneczna", diff --git a/core/l10n/pl.json b/core/l10n/pl.json index dad616ce136..af48c305e16 100644 --- a/core/l10n/pl.json +++ b/core/l10n/pl.json @@ -59,15 +59,27 @@ "The following apps have been disabled: %s" : "Następujące aplikacje zostały wyłączone: %s", "Already up to date" : "Już zaktualizowano", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Serwer WWW nie jest jeszcze na tyle poprawnie skonfigurowany, aby umożliwić synchronizację plików, ponieważ interfejs WebDAV może być uszkodzony.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Serwer WWW nie jest prawidłowo skonfigurowany do rozwiązania problemu z \"{url}\". Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Serwer WWW nie został poprawnie skonfigurowany do rozwiązania problemu z \"{url}\". Jest to najprawdopodobniej związane z konfiguracją serwera, który nie został zaktualizowany do bezpośredniego dostępu tego katalogu. Proszę porównać swoją konfigurację z dostarczonymi regułami przepisywania w \".htaccess\" dla Apache lub podanymi w dokumentacji dla Nginx na {linkstart}stronie dokumentacji ↗{linkend}. W Nginx są to zazwyczaj linie zaczynające się od \"location ~\", które wymagają aktualizacji.", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "Serwer WWW nie został poprawnie skonfigurowany do dostarczania plików .woff2. Zazwyczaj jest to problem z konfiguracją Nginx. Dla Nextcloud 15 wymagane jest dostosowanie jej, aby dostarczać pliki .woff2. Porównaj swoją konfigurację Nginx z zalecaną konfiguracją w naszej {linkstart}dokumentacji ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Wygląda na to, że PHP nie jest poprawnie skonfigurowany do wysyłania zapytań o zmienne środowiskowe systemu. Test gentenv(\"PATH\") zwraca tylko pustą wartość.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Sprawdź {linkstart}dokumentację instalacji ↗{linkend}, aby znaleźć uwagi dotyczące konfiguracji PHP i konfiguracji PHP serwera, zwłaszcza jeśli używasz php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Włączono konfigurację tylko do odczytu. Zapobiega to ustawianiu niektórych konfiguracji przez interfejs internetowy. Ponadto plik musi być zapisany ręcznie przy każdej aktualizacji.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Baza danych nie działa z poziomem izolacji transakcji \"READ COMMITTED\". Może to powodować problemy, gdy wiele akcji jest wykonywanych równolegle.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Brak modułu PHP 'fileinfo'. Zdecydowanie zaleca się, aby ten moduł mógł uzyskać najlepsze wyniki przy wykrywaniu typu MIME.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "Transakcyjne blokowanie plików jest wyłączone, co może powodować problemy w działaniu. Włącz \"filelocking.enabled\" w config.php, aby rozwiązać je. Więcej informacji znajdziesz w {linkstart}dokumentacji ↗{linkend}.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Jeśli instalacja nie jest zainstalowana w katalogu głównym domeny i używa systemu Cron, mogą wystąpić problemy z generowaniem adresu URL. Aby uniknąć tych problemów, ustaw opcję \"overwrite.cli.url\" w pliku config.php na ścieżkę do katalogu głównego instalacji (sugestia: \"{suggestedOverwriteCliURL}\").", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "Twoja instalacja nie ma ustawionego domyślnego regionu telefonu. Jest to wymagane do weryfikacji numerów telefonów w ustawieniach profilu bez kodu kraju. Aby zezwolić na numery bez kodu kraju, dodaj \"default_phone_region\" z odpowiednim {linkstart}kodem ISO 3166-1 ↗{linkend} regionu do pliku konfiguracyjnego.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nie można było wykonać zadania cron przez CLI. Pojawiły się następujące błędy techniczne:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Serwer nie ma aktywnego połączenia z Internetem. Wiele połączeń nie może być zrealizowanych. Oznacza to, że część funkcji takich jak zewnętrzny magazyn, powiadomienia o aktualizacjach lub instalacja aplikacji firm trzecich nie będą działać. Dostęp zdalny do plików oraz wysyłanie powiadomień e-mailowych również może nie działać. Nawiąż połączenie z tego serwera do Internetu, aby korzystać ze wszystkich funkcji.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nie skonfigurowano pamięci podręcznej. Aby zwiększyć wydajność, skonfiguruj memcache, jeśli jest dostępne. Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nie znaleziono odpowiedniego źródła przypadkowości przez PHP. Jest to bardzo niezalecane w związku z bezpieczeństwem. Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Aktualnie używasz PHP {version}. Zaktualizuj swoją wersję PHP korzystając z {linkstart}aktualizacji wydajności i bezpieczeństwa zapewniane przez grupę PHP ↗{linkend}, gdy tylko dystrybucja zacznie je obsługiwać.", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 to ostatnie wydanie obsługujące PHP 7.2. Nextcloud 21 wymaga co najmniej PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Konfiguracja nagłówka reverse proxy jest niepoprawna lub uzyskujesz dostęp do Nextcloud z zaufanego serwera proxy. Jeśli tak nie jest, to jest to problem bezpieczeństwa i może pozwolić atakującemu na sfałszowanie adresu IP jako widocznego dla Nextcloud. Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached jest skonfigurowany jako rozproszona pamięć podręczna, ale moduł PHP \"memcache\" jest zainstalowany niewłaściwy. \\OC\\Memcache\\Memcached obsługuje tylko \"memcached\", a nie \"memcache\". Zobacz {linkstart}memcached wiki o obu modułach ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Niektóre pliki nie przeszły sprawdzenia integralności. Więcej informacji na temat rozwiązania tego problemu można znaleźć w {linkstart1}dokumentacji ↗{linkend}. ({linkstart2}Lista niepoprawnych plików…{linkend}/{linkstart3}Skanuj ponownie…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "Moduł PHP OPcache nie jest załadowany. {linkstart}Dla lepszej wydajności zaleca się ↗{linkend} załadowanie go w instalacji PHP.", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "Funkcja PHP \"set_time_limit\" nie jest dostępna. Może to spowodować zatrzymanie skryptów w trakcie wykonywania, przerywając instalację. Zdecydowanie zaleca się włączenie tej funkcji.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Twoje PHP nie posiada wsparcia dla FreeType, co powoduje problemy ze zdjęciami profilowymi i interfejsem ustawień.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Brak indeksu \"{indexName}\" w tabeli \"{tableName}\".", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "W bazie danych brakuje niektórych opcjonalnych kolumn. Ze względu na fakt, że dodawanie kolumn do dużych tabel może zająć trochę czasu oraz mogą one być opcjonalne, nie zostały dodane automatycznie. Brakujące kolumny można dodać ręcznie w trakcie pracy instancji uruchamiając \"occ db:add-missing-columns\". Po dodaniu kolumn niektóre funkcje mogą poprawić czas reakcji lub użyteczność.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "W tej instancji brakuje niektórych zalecanych modułów PHP. W celu zwiększenia wydajności i lepszej kompatybilności zaleca się ich instalację.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Moduł php-imagick w tej instancji nie obsługuje formatu SVG. Aby uzyskać lepszą kompatybilność, zaleca się jego zainstalowanie.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Niektóre kolumny w bazie danych nie zawierają konwersji do big integers. Ze względu na to, że zmiana typów kolumn w dużych tabelach może zająć dużo czasu, nie zostały one zmienione automatycznie. Oczekujące zmiany można wykonać ręcznie, uruchamiając 'occ db:convert-filecache-bigint'. Ta operacja musi zostać wykonana, gdy instancja jest w trybie offline. Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite jest aktualnie używany jako baza danych. Dla większych instalacji zalecamy przełączenie na inną bazę danych.", "This is particularly recommended when using the desktop client for file synchronisation." : "Jest to szczególnie zalecane podczas używania klienta desktopowego do synchronizacji plików.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Aby przeprowadzić migrację do innej bazy danych, użyj narzędzia wiersza poleceń: 'occ db:convert-type' lub zapoznaj się z {linkstart}dokumentacją ↗{linkend}.", "The PHP memory limit is below the recommended value of 512MB." : "Limit pamięci PHP jest poniżej zalecanej wartości 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Niektóre katalogi aplikacji są własnością innego użytkownika tego serwera WWW. Może to wystąpić, gdy aplikacje zostały zainstalowane ręcznie. Sprawdź uprawnienia poniższych katalogów:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL jest używany jako baza danych, ale nie obsługuje znaków 4-bajtowych. Aby korzystać ze znaków 4-bajtowych w nazwach plików lub komentarzach (np. Emoji), zaleca się włączenie tej obsługi w MySQL. Więcej informacji na ten temat przeczytasz na {linkstart}stronie dokumentacji ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Ta aplikacja używa magazynu obiektów opartych na S3, jako magazynu podstawowego. Przesyłane pliki są tymczasowo przechowywane na serwerze, dlatego zalecane jest posiadanie 50 GB wolnego miejsca w katalogu tymczasowym PHP. Sprawdź logi, aby uzyskać pełne informacje o ścieżce i dostępnym miejscu. Aby to umożliwić, należy zmienić katalog tymczasowy w pliku php.ini lub udostępnić więcej miejsca dla tej ścieżki.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Dostęp do instancji odbywa się za pośrednictwem bezpiecznego połączenia, natomiast instancja generuje niezabezpieczone adresy URL. Najprawdopodobniej oznacza to, że jesteś za odwrotnym proxy, a zastępowanie zmiennych konfiguracji nie jest ustawione poprawnie. Przeczytaj o tym na {linkstart}stronie dokumentacji ↗{linkend}.", "Error occurred while checking server setup" : "Wystąpił błąd podczas sprawdzania konfiguracji serwera", + "For more details see the {linkstart}documentation ↗{linkend}." : "Więcej informacji można znaleźć w {linkstart}dokumentacji ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Twój katalog danych i pliki są prawdopodobnie dostępne przez Internet. Plik .htaccess nie działa. Zdecydowanie zaleca się skonfigurowanie serwera WWW w taki sposób, aby katalog danych nie był już dostępny, albo przenieś katalog danych poza główny katalog serwera WWW.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "Nagłówek HTTP \"{header}\" nie jest ustawiony na \"{expected}\". Jest to potencjalne zagrożenie dla bezpieczeństwa lub prywatności. Dlatego zaleca się odpowiednie dostosowanie tego ustawienia.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "Nagłówek HTTP \"{header}\" nie jest ustawiony na \"{expected}\". Niektóre funkcje mogą nie działać poprawnie. Dlatego zaleca się odpowiednie dostosowanie tego ustawienia.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "Nagłówek HTTP \"{header}\" nie zawiera \"{expected}\". Jest to potencjalne zagrożenie dla bezpieczeństwa lub prywatności. Dlatego zaleca się odpowiednie dostosowanie tego ustawienia.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "Nagłówek HTTP \"{header}\" nie jest ustawiony na \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" lub \"{val5}\". Może to spowodować wyciek informacji o stronie odsyłającej. Zobacz {linkstart}rekomendację W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "Nagłówek HTTP \"Strict-Transport-Security\" nie jest ustawiony na co najmniej \"{seconds}\" sekund. W celu zwiększenia bezpieczeństwa zaleca się włączenie HSTS w sposób opisany w {linkstart}poradach bezpieczeństwa ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Dostęp do tej strony jest za pośrednictwem protokołu HTTP. Zaleca się skonfigurowanie serwera tak, aby wymagał HTTPS, zgodnie z opisem w {linkstart}poradach bezpieczeństwa ↗{linkend}.", "unknown text" : "nieznany tekst", "Hello world!" : "Witaj świecie!", "sunny" : "słoneczna", diff --git a/core/l10n/pt_BR.js b/core/l10n/pt_BR.js index a58ee2a8f6f..a192915810b 100644 --- a/core/l10n/pt_BR.js +++ b/core/l10n/pt_BR.js @@ -30,7 +30,7 @@ OC.L10N.register( "Some of your link shares have been removed" : "Alguns dos seus compartilhamentos de links foram removidos", "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "Devido a um bug de segurança, tivemos que remover alguns dos seus compartilhamentos de links. Por favor, veja o link para mais informações.", "The user limit of this instance is reached." : "O limite do usuário desta instância foi atingido.", - "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Digite sua chave de assinatura para aumentar o limite de usuários. Para obter mais informações sobre Nextcloud Enterprise, consulte nosso website.", + "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Digite sua chave de assinatura para aumentar o limite de usuários. Para obter mais informações sobre o Nextcloud Enterprise, consulte nosso website.", "Preparing update" : "Preparando a atualização", "[%d / %d]: %s" : "[%d / %d]: %s", "Repair step:" : "Etapa do reparo:", @@ -61,15 +61,27 @@ OC.L10N.register( "The following apps have been disabled: %s" : "Os seguintes aplicativos foram desativados: %s", "Already up to date" : "Já está atualizado", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Seu servidor web ainda não está configurado corretamente para permitir a sincronização de arquivos, porque a interface do WebDAV parece estar quebrada.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Seu servidor da web não está configurado corretamente para resolver \"{url}\". Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Seu servidor da web não está configurado corretamente para resolver \"{url}\". Provavelmente, isso está relacionado a uma configuração do servidor da web que não foi atualizada para entregar essa pasta diretamente. Compare sua configuração com as regras de reescrita enviadas em \".htaccess\" para Apache ou aquela fornecida na documentação para Nginx em sua {linkstart}página de documentação ↗{linkend}. No Nginx essas são normalmente as linhas que começam com \"location ~\" que precisam de uma atualização. ", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "Seu servidor da web não está configurado corretamente para entregar arquivos .woff2. Normalmente, esse é um problema com a configuração do Nginx. Para o Nextcloud 15, é necessário um ajuste para entregar também arquivos .woff2. Compare sua configuração Nginx com a configuração recomendada em nossa {linkstart}documentação ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "O PHP não parece estar configurado corretamente para consultar variáveis de ambiente do sistema. O teste com getenv(\"PATH\") retorna apenas uma resposta vazia.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Verifique a {linkstart}documentação de instalação ↗{linkend} para notas de configuração de PHP e a configuração de PHP do seu servidor, especialmente ao usar php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "A configuração read-only foi ativada. Isso impede a definição de algumas configurações através da interface web. Além disso, o arquivo precisa ser gravado manualmente em cada atualização.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "O banco de dados não está rodando com o nível de isolamento de transação \"READ COMMITTED\". Isso pode causar problemas quando várias ações são executadas em paralelo.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "O módulo PHP \"fileinfo\" está faltando. É recomendado ativar este módulo para obter os melhores resultados com a detecção de tipos MIME.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "O bloqueio de arquivo transacional está desabilitado, isso pode levar a problemas com condições de corrida. Habilite \"filelocking.enabled\" em config.php para evitar esses problemas . Vela a {linkstart}documentação ↗{linkend} para mais informação.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Se sua instalação não estiver instalada na raiz do domínio e usar o cron do sistema, pode haver problemas com a geração da URL. Para evitar esses problemas, defina a opção \"overwrite.cli.url\" no arquivo config.php para o caminho webroot da sua instalação (sugestão: \"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "Sua instalação não tem uma região de telefone padrão definida. Isso é necessário para validar números de telefone nas configurações do perfil sem um código de país. Para permitir números sem um código de país, adicione \"default_phone_region\" com o respectivo {linkstart}ISO 3166-1 código ↗{linkend} da região para o seu arquivo de configuração.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Não foi possível executar a tarefa cron pelo CLI. Os seguintes erros técnicos surgiram:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Este servidor não possui conexão com a internet: Vários pontos não puderam ser acessados. Isso significa que alguns dos recursos como montagem de armazenamento externo, notificações sobre atualizações ou instalação de aplicativos de terceiros não funcionarão. Acesso a arquivos remotos e envio de e-mails de notificação não funcionarão também. Estabeleça uma conexão deste servidor com a Internet para aproveitar todos os recursos.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nenhum cache de memória foi configurado. Para melhorar o desempenho, configure um memcache, se disponível. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nenhuma fonte adequada para aleatoriedade encontrada pelo PHP, o que é altamente desencorajado por razões de segurança. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Você está executando o PHP {version}. Faça atualização de sua versão do PHP para aproveitar as vantagens do desempenho de {linkstart} e das atualizações de segurança fornecidas pelo Grupo PHP ↗{linkend} assim que sua distribuição oferecer suporte. ", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 é a última versão compatível com PHP 7.2. Nextcloud 21 requer ao menos PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A configuração do cabeçalho do proxy reverso está incorreta ou você está acessando o Nextcloud de um proxy confiável. Caso contrário, este é um problema de segurança e pode permitir que um invasor falsifique seu endereço IP como visível para o Nextcloud. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}. ", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como cache distribuído, mas o módulo PHP incorreto \"memcache\" está instalado. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". . Veja o {linkstart}memcached wiki sobre ambos os módulos ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver esse problema podem ser encontradas na {linkstart1}documentação ↗{linkend}. ({linkstart2}Lista de arquivos inválidos…{linkend} / {linkstart3}Rescan…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "O módulo PHP OPcache não está carregado. {linkstart}Para melhor desempenho, é recomendado ↗{linkado} carregá-lo na instalação do PHP. ", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar em travamento de scripts, quebrando sua instalação. A ativação desta função é altamente recomendada.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Seu PHP não possui suporte à FreeType, resultando em problemas nas fotos de perfil e interface de configurações.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Falta o índice \"{indexName}\" na tabela \"{tableName}\".", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Estão faltando algumas colunas opcionais no banco de dados. Devido ao fato de que adicionar colunas em grandes tabelas pode levar algum tempo, elas não foram adicionadas automaticamente por serem opcionais. Ao executar \"occ db: add-missing-columns\", elas podem ser adicionadas manualmente enquanto a instância continua em execução. Depois que as colunas são adicionadas, alguns recursos podem melhorar a capacidade de resposta ou a usabilidade.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Nesta instalação estão faltando alguns módulos PHP recomendados. Para melhor desempenho e compatibilidade, é altamente recomendável instalá-los.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "O módulo php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-lo.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas do banco de dados estão sem uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, elas não foram alteradas automaticamente. Executando 'occ db: convert-filecache-bigint' essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância está offline. Para obter mais detalhes, leia {linkstart} a página de documentação sobre isso ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Atualmente, o SQLite está sendo usado como plataforma de banco de dados. Para instalações maiores, recomendamos que migre para outra.", "This is particularly recommended when using the desktop client for file synchronisation." : "Isso é recomendado ao usar o cliente da área de trabalho para sincronização de arquivos.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Para migrar para outro banco de dados, use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a {linkstart}documentação do ↗{linkend}. ", "The PHP memory limit is below the recommended value of 512MB." : "O limite de memória do PHP está abaixo do valor recomendado de 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Alguns diretórios de aplicativos são de propriedade de um usuário diferente do servidor da web. Esse pode ser o caso se os aplicativos tiverem sido instalados manualmente. Verifique as permissões dos seguintes diretórios de aplicativos:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL é usado como banco de dados, mas não oferece suporte a caracteres de 4 bytes. Para ser capaz de lidar com caracteres de 4 bytes (como emojis) sem problemas em nomes de arquivos ou comentários, por exemplo, é recomendado habilitar o suporte de 4 bytes no MySQL . Para mais detalhes, leia {linkstart}a página de documentação sobre isso ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Este Nextcloud usa um armazenamento de objeto baseado no S3 como armazenamento primário. Os arquivos enviados são armazenados temporariamente no servidor e portanto é recomendado ter 50 GB de espaço livre disponível no diretório temp do PHP. Verifique os logs para obter detalhes completos sobre o caminho e o espaço disponível. Para melhorar isso, altere o diretório temporário no arquivo php.ini ou disponibilize mais espaço nesse caminho.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Você está acessando sua instância por meio de uma conexão segura, mas sua instância está gerando URLs inseguros. Isso provavelmente significa que você está atrás de um proxy reverso e as variáveis de configuração de substituição não estão definidas corretamente . Por favor leia {linkstart}a página de documentação sobre isso ↗{linkend}.", "Error occurred while checking server setup" : "Erro ao verificar a configuração do servidor", + "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter mais detalhes, consulte a {linkstart}documentação ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Seu diretório de dados e arquivos provavelmente podem ser acessados pela Internet. O arquivo .htaccess não está funcionando. É altamente recomendado que você configure seu servidor web para que o diretório de dados não seja mais acessível ou mova o diretório de dados fora da raiz de documentos do servidor web.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Este é um potencial risco de segurança ou privacidade e é recomendado ajustar esta configuração de acordo.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Alguns recursos podem não funcionar corretamente e é recomendado ajustar esta configuração de acordo.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não contém \"{expected}\". Esse é um risco potencial de segurança ou privacidade. É recomendável ajustar essa configuração de acordo.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "O \"{header}\" O cabeçalho HTTP não está definido para \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ou \"{val5}\". Isso pode vazar informações do referenciador. Veja {linkstart}Recomendações W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "O \"Strict-Transport-Security\" O cabeçalho HTTP não está definido para pelo menos \"{seconds}\" seguntos. Para maior segurança, é recomendável habilitar o HSTS conforme descrito nas {linkstart}dicas de segurança ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Acessando o site de forma insegura via HTTP. É altamente recomendável configurar seu servidor para exigir HTTPS, conforme descrito nas {linkstart}dicas de segurança ↗{linkend}. ", "unknown text" : "texto desconhecido", "Hello world!" : "Olá mundo!", "sunny" : "ensolarado", diff --git a/core/l10n/pt_BR.json b/core/l10n/pt_BR.json index edc384346c4..69597b89a08 100644 --- a/core/l10n/pt_BR.json +++ b/core/l10n/pt_BR.json @@ -28,7 +28,7 @@ "Some of your link shares have been removed" : "Alguns dos seus compartilhamentos de links foram removidos", "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "Devido a um bug de segurança, tivemos que remover alguns dos seus compartilhamentos de links. Por favor, veja o link para mais informações.", "The user limit of this instance is reached." : "O limite do usuário desta instância foi atingido.", - "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Digite sua chave de assinatura para aumentar o limite de usuários. Para obter mais informações sobre Nextcloud Enterprise, consulte nosso website.", + "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Digite sua chave de assinatura para aumentar o limite de usuários. Para obter mais informações sobre o Nextcloud Enterprise, consulte nosso website.", "Preparing update" : "Preparando a atualização", "[%d / %d]: %s" : "[%d / %d]: %s", "Repair step:" : "Etapa do reparo:", @@ -59,15 +59,27 @@ "The following apps have been disabled: %s" : "Os seguintes aplicativos foram desativados: %s", "Already up to date" : "Já está atualizado", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "Seu servidor web ainda não está configurado corretamente para permitir a sincronização de arquivos, porque a interface do WebDAV parece estar quebrada.", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "Seu servidor da web não está configurado corretamente para resolver \"{url}\". Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}.", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "Seu servidor da web não está configurado corretamente para resolver \"{url}\". Provavelmente, isso está relacionado a uma configuração do servidor da web que não foi atualizada para entregar essa pasta diretamente. Compare sua configuração com as regras de reescrita enviadas em \".htaccess\" para Apache ou aquela fornecida na documentação para Nginx em sua {linkstart}página de documentação ↗{linkend}. No Nginx essas são normalmente as linhas que começam com \"location ~\" que precisam de uma atualização. ", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "Seu servidor da web não está configurado corretamente para entregar arquivos .woff2. Normalmente, esse é um problema com a configuração do Nginx. Para o Nextcloud 15, é necessário um ajuste para entregar também arquivos .woff2. Compare sua configuração Nginx com a configuração recomendada em nossa {linkstart}documentação ↗{linkend}.", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "O PHP não parece estar configurado corretamente para consultar variáveis de ambiente do sistema. O teste com getenv(\"PATH\") retorna apenas uma resposta vazia.", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Verifique a {linkstart}documentação de instalação ↗{linkend} para notas de configuração de PHP e a configuração de PHP do seu servidor, especialmente ao usar php-fpm.", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "A configuração read-only foi ativada. Isso impede a definição de algumas configurações através da interface web. Além disso, o arquivo precisa ser gravado manualmente em cada atualização.", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "O banco de dados não está rodando com o nível de isolamento de transação \"READ COMMITTED\". Isso pode causar problemas quando várias ações são executadas em paralelo.", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "O módulo PHP \"fileinfo\" está faltando. É recomendado ativar este módulo para obter os melhores resultados com a detecção de tipos MIME.", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "O bloqueio de arquivo transacional está desabilitado, isso pode levar a problemas com condições de corrida. Habilite \"filelocking.enabled\" em config.php para evitar esses problemas . Vela a {linkstart}documentação ↗{linkend} para mais informação.", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "Se sua instalação não estiver instalada na raiz do domínio e usar o cron do sistema, pode haver problemas com a geração da URL. Para evitar esses problemas, defina a opção \"overwrite.cli.url\" no arquivo config.php para o caminho webroot da sua instalação (sugestão: \"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "Sua instalação não tem uma região de telefone padrão definida. Isso é necessário para validar números de telefone nas configurações do perfil sem um código de país. Para permitir números sem um código de país, adicione \"default_phone_region\" com o respectivo {linkstart}ISO 3166-1 código ↗{linkend} da região para o seu arquivo de configuração.", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Não foi possível executar a tarefa cron pelo CLI. Os seguintes erros técnicos surgiram:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Este servidor não possui conexão com a internet: Vários pontos não puderam ser acessados. Isso significa que alguns dos recursos como montagem de armazenamento externo, notificações sobre atualizações ou instalação de aplicativos de terceiros não funcionarão. Acesso a arquivos remotos e envio de e-mails de notificação não funcionarão também. Estabeleça uma conexão deste servidor com a Internet para aproveitar todos os recursos.", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nenhum cache de memória foi configurado. Para melhorar o desempenho, configure um memcache, se disponível. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}.", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "Nenhuma fonte adequada para aleatoriedade encontrada pelo PHP, o que é altamente desencorajado por razões de segurança. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}.", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Você está executando o PHP {version}. Faça atualização de sua versão do PHP para aproveitar as vantagens do desempenho de {linkstart} e das atualizações de segurança fornecidas pelo Grupo PHP ↗{linkend} assim que sua distribuição oferecer suporte. ", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 é a última versão compatível com PHP 7.2. Nextcloud 21 requer ao menos PHP 7.3.", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A configuração do cabeçalho do proxy reverso está incorreta ou você está acessando o Nextcloud de um proxy confiável. Caso contrário, este é um problema de segurança e pode permitir que um invasor falsifique seu endereço IP como visível para o Nextcloud. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}. ", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como cache distribuído, mas o módulo PHP incorreto \"memcache\" está instalado. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". . Veja o {linkstart}memcached wiki sobre ambos os módulos ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver esse problema podem ser encontradas na {linkstart1}documentação ↗{linkend}. ({linkstart2}Lista de arquivos inválidos…{linkend} / {linkstart3}Rescan…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "O módulo PHP OPcache não está carregado. {linkstart}Para melhor desempenho, é recomendado ↗{linkado} carregá-lo na instalação do PHP. ", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar em travamento de scripts, quebrando sua instalação. A ativação desta função é altamente recomendada.", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Seu PHP não possui suporte à FreeType, resultando em problemas nas fotos de perfil e interface de configurações.", "Missing index \"{indexName}\" in table \"{tableName}\"." : "Falta o índice \"{indexName}\" na tabela \"{tableName}\".", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Estão faltando algumas colunas opcionais no banco de dados. Devido ao fato de que adicionar colunas em grandes tabelas pode levar algum tempo, elas não foram adicionadas automaticamente por serem opcionais. Ao executar \"occ db: add-missing-columns\", elas podem ser adicionadas manualmente enquanto a instância continua em execução. Depois que as colunas são adicionadas, alguns recursos podem melhorar a capacidade de resposta ou a usabilidade.", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Nesta instalação estão faltando alguns módulos PHP recomendados. Para melhor desempenho e compatibilidade, é altamente recomendável instalá-los.", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "O módulo php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-lo.", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas do banco de dados estão sem uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, elas não foram alteradas automaticamente. Executando 'occ db: convert-filecache-bigint' essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância está offline. Para obter mais detalhes, leia {linkstart} a página de documentação sobre isso ↗{linkend}.", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Atualmente, o SQLite está sendo usado como plataforma de banco de dados. Para instalações maiores, recomendamos que migre para outra.", "This is particularly recommended when using the desktop client for file synchronisation." : "Isso é recomendado ao usar o cliente da área de trabalho para sincronização de arquivos.", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Para migrar para outro banco de dados, use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a {linkstart}documentação do ↗{linkend}. ", "The PHP memory limit is below the recommended value of 512MB." : "O limite de memória do PHP está abaixo do valor recomendado de 512MB.", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Alguns diretórios de aplicativos são de propriedade de um usuário diferente do servidor da web. Esse pode ser o caso se os aplicativos tiverem sido instalados manualmente. Verifique as permissões dos seguintes diretórios de aplicativos:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL é usado como banco de dados, mas não oferece suporte a caracteres de 4 bytes. Para ser capaz de lidar com caracteres de 4 bytes (como emojis) sem problemas em nomes de arquivos ou comentários, por exemplo, é recomendado habilitar o suporte de 4 bytes no MySQL . Para mais detalhes, leia {linkstart}a página de documentação sobre isso ↗{linkend}.", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Este Nextcloud usa um armazenamento de objeto baseado no S3 como armazenamento primário. Os arquivos enviados são armazenados temporariamente no servidor e portanto é recomendado ter 50 GB de espaço livre disponível no diretório temp do PHP. Verifique os logs para obter detalhes completos sobre o caminho e o espaço disponível. Para melhorar isso, altere o diretório temporário no arquivo php.ini ou disponibilize mais espaço nesse caminho.", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Você está acessando sua instância por meio de uma conexão segura, mas sua instância está gerando URLs inseguros. Isso provavelmente significa que você está atrás de um proxy reverso e as variáveis de configuração de substituição não estão definidas corretamente . Por favor leia {linkstart}a página de documentação sobre isso ↗{linkend}.", "Error occurred while checking server setup" : "Erro ao verificar a configuração do servidor", + "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter mais detalhes, consulte a {linkstart}documentação ↗{linkend}.", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Seu diretório de dados e arquivos provavelmente podem ser acessados pela Internet. O arquivo .htaccess não está funcionando. É altamente recomendado que você configure seu servidor web para que o diretório de dados não seja mais acessível ou mova o diretório de dados fora da raiz de documentos do servidor web.", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Este é um potencial risco de segurança ou privacidade e é recomendado ajustar esta configuração de acordo.", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Alguns recursos podem não funcionar corretamente e é recomendado ajustar esta configuração de acordo.", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não contém \"{expected}\". Esse é um risco potencial de segurança ou privacidade. É recomendável ajustar essa configuração de acordo.", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "O \"{header}\" O cabeçalho HTTP não está definido para \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ou \"{val5}\". Isso pode vazar informações do referenciador. Veja {linkstart}Recomendações W3C ↗{linkend}.", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "O \"Strict-Transport-Security\" O cabeçalho HTTP não está definido para pelo menos \"{seconds}\" seguntos. Para maior segurança, é recomendável habilitar o HSTS conforme descrito nas {linkstart}dicas de segurança ↗{linkend}.", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Acessando o site de forma insegura via HTTP. É altamente recomendável configurar seu servidor para exigir HTTPS, conforme descrito nas {linkstart}dicas de segurança ↗{linkend}. ", "unknown text" : "texto desconhecido", "Hello world!" : "Olá mundo!", "sunny" : "ensolarado", diff --git a/core/l10n/zh_CN.js b/core/l10n/zh_CN.js index e2cd22a8145..caaff2a71fd 100644 --- a/core/l10n/zh_CN.js +++ b/core/l10n/zh_CN.js @@ -61,15 +61,27 @@ OC.L10N.register( "The following apps have been disabled: %s" : "以下应用已被禁用:%s", "Already up to date" : "已经是最新", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "您的网页服务器没有正确设置允许文件同步,因为 WebDAV 接口看起来无法正常工作。", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的网页服务器未正确设置以解析“{url}”。更多信息请参见{linkstart}文档↗{linkend}。", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "您的网页服务器没有正确配置以解析 “{url}”。这很可能与web服务器配置没有更新以发布这个文件夹有关。请将您的配置与Apache的“.htaccess”文件中的默认重写规则或与这个{linkstart}文档页面↗{linkend}中提供的Nginx配置进行比较。在Nginx配置中通常需要修改以“location ~”开头的行。", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "您的网页服务器未正确设置以服务 .woff2 文件。这通常是一个 Nginx 配置的问题。对于 Nextcloud 15,需要更改一个设置才能发布 .woff2 文件。请将您的 Nginx 配置与我们{linkstart}文档↗{linkend}中的推荐配置进行比较。", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 的安装似乎不正确,无法访问系统环境变量。getenv(\"PATH\") 函数测试返回了一个空值。", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "请检查{linkstart}安装文档 ↗{linkend}中关于PHP的配置说明和您服务器上的PHP配置,特别是在使用 php-fpm 时。", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "只读配置已启用。这可以在浏览器界面保护配置。另外,每次更新时需手动赋予该文件写权限。", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "数据库没有运行在 \"READ COMMITTED\" 事务隔离级别。当多项操作同时执行时将产生问题。", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未找到 PHP 的 \"fileinfo\" 模块。强烈推荐启用该模块,从而获得更好的 MIME 类型探测结果。", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "事务文件锁被禁用,这可能导致并发争用相关的问题。在config.php中启用 “filelocking.enabled” 选项来规避这些问题。请参考{linkstart}文档↗{linkend}获取更多信息。", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "如果没有将 Nextcloud 安装到域名根目录并使用系统计划任务,生成超链接就会出现问题。为避免此问题,请在 config.php 配置文件中将 \"overwrite.cli.url\" 设置为您 Nextcloud 安装的路径。(建议:\"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "您的安装没有设置默认的电话区域。这对验证配置设定中没有国家代码的电话号码而言是必需的。要允许没有国家代码的电话号码,请添加带区域相应的 {linkstart}ISO 3166-1 code ↗{linkend} 的“默认_电话_区域”到你的配置文件中。", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "无法通过 CLI 执行计划任务,请查看以下技术错误:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "此服务器没有可用的互联网连接:多个节点无法访问。这意味着某些功能比如挂载外部存储,更新通知以及安装第三方应用将无法工作。远程访问文件和发送通知邮件可能也不工作。启用这台服务器上的互联网连接以享用所有功能。", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "内存缓存未配置。为了提升性能,请尽量配置内存缓存。更多信息请参见{linkstart}文档↗{linkend}。", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP找不到合适的随机性来源,出于安全原因,这是强烈不推荐的。 更多信息可以在{linkstart}文档↗{linkend}中找到。", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您当前正在运行 PHP 版本 {version}。我们建议您在您的操作系统发行版支持PHP新版本的时候进行升级,以获得{linkstart}来自 PHP 官方的性能和安全更新↗{linkend}。", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 将是最后一个支持 PHP 7.2 的发布版。Nextcloud 21 将最低支持 PHP 7.3。", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "反向代理头部配置错误,或者您正在通过可信的代理访问 Nextcloud。如果您不是通过可信代理访问 Nextcloud,那这是一个安全问题,它可能允许攻击者通过伪装其IP地址以访问 Nextcloud。更多信息请查看{linkstart}文档↗{linkend}。", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached 被配置为分布式缓存,但安装了错误的 PHP 模块 \"memcache\"。\\OC\\Memcache\\Memcached 只支持 \"memcached\" 不支持 \"memcache\"。见 {linkstart} 有关两者的 memcached 维基 ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "一些文件未通过完整性检查。有关如何解决这一问题的进一步信息可在 {linkstart1}文档↗{linkend}中找到。({linkstart2}无效文件列表…{linkend} / {linkstart3}重新扫描…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "未加载 PHP OPcache 模块。{linkstart} 为了更佳性能,建议 ↗{linkend} 将其加载到你的 PHP 安装。", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "PHP函数“set_time_limit”不可用。 这可能会导致脚本在执行过程中暂停,从而导致安装中断。 我们强烈建议启用此功能。", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "您的 PHP 没有 FreeType 支持,导致配置文件图片和设置界面中断。", "Missing index \"{indexName}\" in table \"{tableName}\"." : "在数据表 \"{tableName}\" 中无法找到索引 \"{indexName}\"。", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "数据库缺少一些可选列。 由于在大表上添加列可能会花费一些时间,因此在可以选择时不会自动添加列。 通过运行 “occ db:add-missing-columns”,可以在实例继续运行时手动添加那些缺少的列。 添加列后,某些功能可能会提高响应速度或可用性。", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "该实例缺失了一些推荐的 PHP 模块。为提高性能和兼容性,我们强烈建议安装它们。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "此实例中的 php-imagick 模块不支持 SVG。为了获得更好的兼容性,建议安装它。", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "数据库中的一些列缺少到 big int 的转换。由于更改大表上的列类型可能需要一些时间,所以它们不会被自动更改。通过运行 'occ db:convert-filecache-bigint',这些挂起的更改可以手动应用。需要在实例离线时执行此操作。进一步的细节,可以阅读 {linkstart} 关于此问题的文档页面 ↗{linkend}", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "当前正在使用 SQLite 作为后端数据库。多用户使用时,推荐您改用其他的数据库。", "This is particularly recommended when using the desktop client for file synchronisation." : "特别推荐使用桌面客户端同步的用户选择。", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "要迁移到另一个数据库,使用命令行工具 'occ db:convert-type'或见 {linkstart}文档↗{linkend}", "The PHP memory limit is below the recommended value of 512MB." : "PHP 内存限制低于建议值 512MB。", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "有些应用程序目录是由与 Web 服务器不同的用户拥有的。如果应用程序是手动安装的,情况可能是这样的。检查以下应用程序目录的权限:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL 被用作数据库,但不支持 4 字节字符。要能够在文件名或评论中正确处理 4 字节字符 (如 emoji),建议在 MySQL 中启用 4 字节支持。更多细节,可以阅读 {linkstart}有关此问题的文档、页 ↗{linkend}。", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "此实例使用基于S3的对象存储作为主存储。上传的文件会临时存放在服务器上,所以建议PHP的临时目录有50 GB的可用空间。路径和可用空间的详情请查看日志。要改善此状况请修改php.ini文件中的临时目录路径或增加该路径的可用空间。", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "你正通过安全连接访问你的实例,然而你的实例正生成不安全的 URL。这很可能意味着你位于反向代理的后面,覆盖的配置变量没有正确设置。可以阅读 {linkstart}有关此问题的文档页 ↗{linkend}", "Error occurred while checking server setup" : "检查服务器设置时出错", + "For more details see the {linkstart}documentation ↗{linkend}." : "更多细节,见 {linkstart}文档 ↗{linkend}", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "您的数据目录和文件可以从互联网直接访问。.htaccess 文件不起作用。强烈建议您配置 Web 服务器,以便数据目录不再可访问,或者您可以将数据目录移动到 Web 服务器文档根目录。", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "HTTP 请求头 \"{header}\" 没有配置为 \"{expected}\"。这是一个潜在的安全或隐私风险,我们建议您调整这项设置。", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "HTTP 请求头 \"{header}\" 没有配置为 \"{expected}\"。某些功能可能无法正常工作,因此建议相应地调整此设置。", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "HTTP 头 \"{header}\" 未包含 \"{expected}\"。这是一种潜在的安全或隐私风险,因此推荐调整此项设置。", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "\"{header}\" HTTP 头 未设置到 \"{val1}\"、 \"{val2}\"、 \"{val3}\"、 \"{val4}\" 或 \"{val5}\"。这可能会泄露 refer 信息。见 {linkstart}W3C 建议 ↗{linkend}", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "\"Strict-Transport-Security\" HTTP 头未设为至少 \"{seconds}\" 秒。为了提高安全性,建议启用 HSTS,参考步骤见 {linkstart}安全小贴士 ↗{linkend}", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "通过 HTTP 不安全访问站点。强烈建议你将服务器设置为要求 HTTPS,参考步骤见 {linkstart}安全小贴士 ↗{linkend}", "unknown text" : "未知文字", "Hello world!" : "你好,世界!", "sunny" : "晴", diff --git a/core/l10n/zh_CN.json b/core/l10n/zh_CN.json index 55a6b286851..2d6865e5bad 100644 --- a/core/l10n/zh_CN.json +++ b/core/l10n/zh_CN.json @@ -59,15 +59,27 @@ "The following apps have been disabled: %s" : "以下应用已被禁用:%s", "Already up to date" : "已经是最新", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "您的网页服务器没有正确设置允许文件同步,因为 WebDAV 接口看起来无法正常工作。", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的网页服务器未正确设置以解析“{url}”。更多信息请参见{linkstart}文档↗{linkend}。", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "您的网页服务器没有正确配置以解析 “{url}”。这很可能与web服务器配置没有更新以发布这个文件夹有关。请将您的配置与Apache的“.htaccess”文件中的默认重写规则或与这个{linkstart}文档页面↗{linkend}中提供的Nginx配置进行比较。在Nginx配置中通常需要修改以“location ~”开头的行。", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "您的网页服务器未正确设置以服务 .woff2 文件。这通常是一个 Nginx 配置的问题。对于 Nextcloud 15,需要更改一个设置才能发布 .woff2 文件。请将您的 Nginx 配置与我们{linkstart}文档↗{linkend}中的推荐配置进行比较。", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 的安装似乎不正确,无法访问系统环境变量。getenv(\"PATH\") 函数测试返回了一个空值。", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "请检查{linkstart}安装文档 ↗{linkend}中关于PHP的配置说明和您服务器上的PHP配置,特别是在使用 php-fpm 时。", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "只读配置已启用。这可以在浏览器界面保护配置。另外,每次更新时需手动赋予该文件写权限。", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "数据库没有运行在 \"READ COMMITTED\" 事务隔离级别。当多项操作同时执行时将产生问题。", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未找到 PHP 的 \"fileinfo\" 模块。强烈推荐启用该模块,从而获得更好的 MIME 类型探测结果。", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "事务文件锁被禁用,这可能导致并发争用相关的问题。在config.php中启用 “filelocking.enabled” 选项来规避这些问题。请参考{linkstart}文档↗{linkend}获取更多信息。", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "如果没有将 Nextcloud 安装到域名根目录并使用系统计划任务,生成超链接就会出现问题。为避免此问题,请在 config.php 配置文件中将 \"overwrite.cli.url\" 设置为您 Nextcloud 安装的路径。(建议:\"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "您的安装没有设置默认的电话区域。这对验证配置设定中没有国家代码的电话号码而言是必需的。要允许没有国家代码的电话号码,请添加带区域相应的 {linkstart}ISO 3166-1 code ↗{linkend} 的“默认_电话_区域”到你的配置文件中。", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "无法通过 CLI 执行计划任务,请查看以下技术错误:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "此服务器没有可用的互联网连接:多个节点无法访问。这意味着某些功能比如挂载外部存储,更新通知以及安装第三方应用将无法工作。远程访问文件和发送通知邮件可能也不工作。启用这台服务器上的互联网连接以享用所有功能。", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "内存缓存未配置。为了提升性能,请尽量配置内存缓存。更多信息请参见{linkstart}文档↗{linkend}。", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP找不到合适的随机性来源,出于安全原因,这是强烈不推荐的。 更多信息可以在{linkstart}文档↗{linkend}中找到。", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您当前正在运行 PHP 版本 {version}。我们建议您在您的操作系统发行版支持PHP新版本的时候进行升级,以获得{linkstart}来自 PHP 官方的性能和安全更新↗{linkend}。", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 将是最后一个支持 PHP 7.2 的发布版。Nextcloud 21 将最低支持 PHP 7.3。", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "反向代理头部配置错误,或者您正在通过可信的代理访问 Nextcloud。如果您不是通过可信代理访问 Nextcloud,那这是一个安全问题,它可能允许攻击者通过伪装其IP地址以访问 Nextcloud。更多信息请查看{linkstart}文档↗{linkend}。", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached 被配置为分布式缓存,但安装了错误的 PHP 模块 \"memcache\"。\\OC\\Memcache\\Memcached 只支持 \"memcached\" 不支持 \"memcache\"。见 {linkstart} 有关两者的 memcached 维基 ↗{linkend}.", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "一些文件未通过完整性检查。有关如何解决这一问题的进一步信息可在 {linkstart1}文档↗{linkend}中找到。({linkstart2}无效文件列表…{linkend} / {linkstart3}重新扫描…{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "未加载 PHP OPcache 模块。{linkstart} 为了更佳性能,建议 ↗{linkend} 将其加载到你的 PHP 安装。", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "PHP函数“set_time_limit”不可用。 这可能会导致脚本在执行过程中暂停,从而导致安装中断。 我们强烈建议启用此功能。", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "您的 PHP 没有 FreeType 支持,导致配置文件图片和设置界面中断。", "Missing index \"{indexName}\" in table \"{tableName}\"." : "在数据表 \"{tableName}\" 中无法找到索引 \"{indexName}\"。", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "数据库缺少一些可选列。 由于在大表上添加列可能会花费一些时间,因此在可以选择时不会自动添加列。 通过运行 “occ db:add-missing-columns”,可以在实例继续运行时手动添加那些缺少的列。 添加列后,某些功能可能会提高响应速度或可用性。", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "该实例缺失了一些推荐的 PHP 模块。为提高性能和兼容性,我们强烈建议安装它们。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "此实例中的 php-imagick 模块不支持 SVG。为了获得更好的兼容性,建议安装它。", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "数据库中的一些列缺少到 big int 的转换。由于更改大表上的列类型可能需要一些时间,所以它们不会被自动更改。通过运行 'occ db:convert-filecache-bigint',这些挂起的更改可以手动应用。需要在实例离线时执行此操作。进一步的细节,可以阅读 {linkstart} 关于此问题的文档页面 ↗{linkend}", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "当前正在使用 SQLite 作为后端数据库。多用户使用时,推荐您改用其他的数据库。", "This is particularly recommended when using the desktop client for file synchronisation." : "特别推荐使用桌面客户端同步的用户选择。", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "要迁移到另一个数据库,使用命令行工具 'occ db:convert-type'或见 {linkstart}文档↗{linkend}", "The PHP memory limit is below the recommended value of 512MB." : "PHP 内存限制低于建议值 512MB。", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "有些应用程序目录是由与 Web 服务器不同的用户拥有的。如果应用程序是手动安装的,情况可能是这样的。检查以下应用程序目录的权限:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL 被用作数据库,但不支持 4 字节字符。要能够在文件名或评论中正确处理 4 字节字符 (如 emoji),建议在 MySQL 中启用 4 字节支持。更多细节,可以阅读 {linkstart}有关此问题的文档、页 ↗{linkend}。", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "此实例使用基于S3的对象存储作为主存储。上传的文件会临时存放在服务器上,所以建议PHP的临时目录有50 GB的可用空间。路径和可用空间的详情请查看日志。要改善此状况请修改php.ini文件中的临时目录路径或增加该路径的可用空间。", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "你正通过安全连接访问你的实例,然而你的实例正生成不安全的 URL。这很可能意味着你位于反向代理的后面,覆盖的配置变量没有正确设置。可以阅读 {linkstart}有关此问题的文档页 ↗{linkend}", "Error occurred while checking server setup" : "检查服务器设置时出错", + "For more details see the {linkstart}documentation ↗{linkend}." : "更多细节,见 {linkstart}文档 ↗{linkend}", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "您的数据目录和文件可以从互联网直接访问。.htaccess 文件不起作用。强烈建议您配置 Web 服务器,以便数据目录不再可访问,或者您可以将数据目录移动到 Web 服务器文档根目录。", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "HTTP 请求头 \"{header}\" 没有配置为 \"{expected}\"。这是一个潜在的安全或隐私风险,我们建议您调整这项设置。", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "HTTP 请求头 \"{header}\" 没有配置为 \"{expected}\"。某些功能可能无法正常工作,因此建议相应地调整此设置。", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "HTTP 头 \"{header}\" 未包含 \"{expected}\"。这是一种潜在的安全或隐私风险,因此推荐调整此项设置。", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "\"{header}\" HTTP 头 未设置到 \"{val1}\"、 \"{val2}\"、 \"{val3}\"、 \"{val4}\" 或 \"{val5}\"。这可能会泄露 refer 信息。见 {linkstart}W3C 建议 ↗{linkend}", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "\"Strict-Transport-Security\" HTTP 头未设为至少 \"{seconds}\" 秒。为了提高安全性,建议启用 HSTS,参考步骤见 {linkstart}安全小贴士 ↗{linkend}", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "通过 HTTP 不安全访问站点。强烈建议你将服务器设置为要求 HTTPS,参考步骤见 {linkstart}安全小贴士 ↗{linkend}", "unknown text" : "未知文字", "Hello world!" : "你好,世界!", "sunny" : "晴", diff --git a/core/l10n/zh_HK.js b/core/l10n/zh_HK.js index a3646e968ad..41806642cb1 100644 --- a/core/l10n/zh_HK.js +++ b/core/l10n/zh_HK.js @@ -61,6 +61,7 @@ OC.L10N.register( "The following apps have been disabled: %s" : "以下應用程式已經被停用:%s", "Already up to date" : "此版本為最新版本", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "WebDAV 介面似乎為故障狀態,導致您的網頁伺服器無法提供檔案同步功能。", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的網絡伺服器未正確設置為解析“ {url}”。可以在 {linkstart} 說明書↗{linkend} 中找到更多信息。", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整,導致無法正確取得系統環境變數,因為偵測到 getenv(\"PATH\") 回傳資料為空值", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用,這樣可以防止來自網頁端的設定操作,每次需要更改設定時,都需要手動將設定檔暫時改為可讀寫。", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的資料庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時,這可能會造成問題。", @@ -82,10 +83,12 @@ OC.L10N.register( "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "本系統安裝的 php-imagick 不支援 SVG,為了更好的相容性,建議安裝它。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端資料庫使用 SQLite,在大型服務當中,我們建議您使用其他的資料庫後端。", "This is particularly recommended when using the desktop client for file synchronisation." : "若您使用電腦客戶端來同步檔案,非常建議您這麼做。", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "要遷移到另一個數據庫,請使用指令工具:“ occ db:convert-type”,或參閱 {linkstart} 說明書↗{linkend}。", "The PHP memory limit is below the recommended value of 512MB." : "目前的 PHP 的記憶體限制設定低於建議值 512MB", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "某些應用程式的資料夾所有者與網頁伺服器預設使用者不同。這可能是因為您手動安裝了這些應用程式。請檢查以下應用程式資料夾的相關權限:", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "此站台使用Amazon S3物件儲存為主要儲存區。上傳檔案會暫存在伺服器,因此建議PHP的暫存資料夾最少要有50GB可用容量。請在登錄檔中查閱關於資料夾路徑及可用容量的詳細資訊。要增進效能,請在php.ini中變更暫存資料夾位置,或將該資料夾容量增加。", "Error occurred while checking server setup" : "檢查伺服器設定時發生錯誤", + "For more details see the {linkstart}documentation ↗{linkend}." : "有關更多細節,請參見 {linkstart} 說明書↗{linkedin}。", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "您的資料目錄和檔案看來可以被公開存取,這表示 .htaccess 設定檔並未生效,我們強烈建議您設定網頁伺服器,拒絕公開存取資料目錄,或者將您的資料目錄移出網頁伺服器根目錄。", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 {header} 標頭設定並不是 \"{expected}\" ,這是一個潛在的安全性和隱私風險,我們建議調整此項設定。", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 {header} 標頭設定並不是 \"{expected}\" ,這將讓某些功能無法正常運作,我們建議修正此項設定。", diff --git a/core/l10n/zh_HK.json b/core/l10n/zh_HK.json index 94e07821bc6..a1c0eb4196c 100644 --- a/core/l10n/zh_HK.json +++ b/core/l10n/zh_HK.json @@ -59,6 +59,7 @@ "The following apps have been disabled: %s" : "以下應用程式已經被停用:%s", "Already up to date" : "此版本為最新版本", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "WebDAV 介面似乎為故障狀態,導致您的網頁伺服器無法提供檔案同步功能。", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的網絡伺服器未正確設置為解析“ {url}”。可以在 {linkstart} 說明書↗{linkend} 中找到更多信息。", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整,導致無法正確取得系統環境變數,因為偵測到 getenv(\"PATH\") 回傳資料為空值", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用,這樣可以防止來自網頁端的設定操作,每次需要更改設定時,都需要手動將設定檔暫時改為可讀寫。", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的資料庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時,這可能會造成問題。", @@ -80,10 +81,12 @@ "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "本系統安裝的 php-imagick 不支援 SVG,為了更好的相容性,建議安裝它。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端資料庫使用 SQLite,在大型服務當中,我們建議您使用其他的資料庫後端。", "This is particularly recommended when using the desktop client for file synchronisation." : "若您使用電腦客戶端來同步檔案,非常建議您這麼做。", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "要遷移到另一個數據庫,請使用指令工具:“ occ db:convert-type”,或參閱 {linkstart} 說明書↗{linkend}。", "The PHP memory limit is below the recommended value of 512MB." : "目前的 PHP 的記憶體限制設定低於建議值 512MB", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "某些應用程式的資料夾所有者與網頁伺服器預設使用者不同。這可能是因為您手動安裝了這些應用程式。請檢查以下應用程式資料夾的相關權限:", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "此站台使用Amazon S3物件儲存為主要儲存區。上傳檔案會暫存在伺服器,因此建議PHP的暫存資料夾最少要有50GB可用容量。請在登錄檔中查閱關於資料夾路徑及可用容量的詳細資訊。要增進效能,請在php.ini中變更暫存資料夾位置,或將該資料夾容量增加。", "Error occurred while checking server setup" : "檢查伺服器設定時發生錯誤", + "For more details see the {linkstart}documentation ↗{linkend}." : "有關更多細節,請參見 {linkstart} 說明書↗{linkedin}。", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "您的資料目錄和檔案看來可以被公開存取,這表示 .htaccess 設定檔並未生效,我們強烈建議您設定網頁伺服器,拒絕公開存取資料目錄,或者將您的資料目錄移出網頁伺服器根目錄。", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 {header} 標頭設定並不是 \"{expected}\" ,這是一個潛在的安全性和隱私風險,我們建議調整此項設定。", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 {header} 標頭設定並不是 \"{expected}\" ,這將讓某些功能無法正常運作,我們建議修正此項設定。", diff --git a/core/l10n/zh_TW.js b/core/l10n/zh_TW.js index 6c6fbf9a807..4ec5f1407fa 100644 --- a/core/l10n/zh_TW.js +++ b/core/l10n/zh_TW.js @@ -61,15 +61,27 @@ OC.L10N.register( "The following apps have been disabled: %s" : "以下應用程式已經被停用:%s", "Already up to date" : "此版本為最新版本", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "WebDAV 介面似乎為故障狀態,導致您的網頁伺服器無法提供檔案同步功能。", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的網頁伺服器設定不正確,因此無法解析「{url}」。更多資訊可在{linkstart}文件 ↗{linkend}中找到。", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "您的伺服器並未正確的設定解析「{url}」。這可能與伺服器的設定未更新為直接傳送此資料夾有關。請檢查 Apache 的 \".htaccess\" 檔案,或在 Nginx 中的{linkstart}文件頁面 ↗{linkend}中查閱重寫規則。在 Nginx 環境中,通常是在由 \"location ~\" 開始的那行需要做調整。", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "您的伺服器並未正確的設定,因此無法傳遞 .woff2 的檔案。這通常是因為 Nginx 的設定問題所導致。在 Nextcloud 15 中,需要一些調整才能一並傳遞 .woff2 的檔案。請檢查您的 Nginx 設定,和 Nextcloud {linkstart}說明文件 ↗{linkend}中提到的建議設定。", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整,導致無法正確取得系統環境變數,因為偵測到 getenv(\"PATH\") 回傳資料為空值", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "請參考{linkstart}安裝文件 ↗{linkend}中 PHP 設定的註記,並檢查您伺服器上的 PHP 設定,特別是如果您是使用 php-fpm 的情況下。", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用,這樣可以防止來自網頁端的設定操作,每次需要更改設定時,都需要手動將設定檔暫時改為可讀寫。", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的資料庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時,這可能會造成問題。", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未偵測到 PHP 模組 \"fileinfo\"。強烈建議啟用這個模組,以取得最好的 MIME 檔案類型偵測支援。", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "事務型文件鎖定的功能已經取消,這可能會造成競態條件,請在 config.php 中啟用 \"filelocking.enabled\" 以避免出現這樣的問題,請參考{linkstart}文件 ↗{linkend}來了解更多的資訊。", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "如果您的安裝路徑不在網域的最上層,並且使用 cron 作為排程器,URL 的生成可能會有問題,為了避免這樣的狀況,請您在 config.php 檔案裡設定 overwrite.cli.url 為您安裝的 webroot 路徑。(建議值:\"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "你並未設定手機國際冠碼。設定後使用者在個人檔案設定手機號碼時不必再輸入國際冠碼。若要這樣做,請新增「default_phone_region」於設定檔,允許的國家及地區請參閱 {linkstart}ISO 3166-1 code ↗{linkend} 清單。", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : " 無法透過 CLI 來執行排程工作,發生以下技術性錯誤:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "伺服器沒有網際網路連線(無法與多個端點取得聯繫),有些功能,像是外部儲存、應用程式更新版通知將無法運作。從遠端存取資料或是寄送電子郵件通知可能也無法運作。建議您設定好網際網路連線以使用所有功能。", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "您沒有設定記憶體快取,如果可以,請設定 memcache 來提升效能。更多資訊請查閱{linkstart}文件 ↗{linkend}。", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP 無法取得合適的亂數產生源。為了安全性考量,不建議如此做。更多資訊參考{linkstart}文件 ↗{linkend}。", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您目前正執行 PHP {version} ,我們建議您升級 PHP 到您的散佈版所支援的最新版本,以取得 {linkstart}PHP 開發團隊提供的效能與安全性更新 ↗{linkend}。", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 將是支援 PHP 7.2 的最後一個版本,Nextcloud 21 僅支援 PHP 7.3 以上的 PHP。", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "偵測到您的反向代理標頭設定不正確,但也有可能是因為您目前正透過信任的代理伺服器存取 Nextcloud。若您目前不是透過信任的代理伺服器存取 Nextcloud,這就是一個安全性問題,允許攻擊者對 Nextcloud 假冒 IP 位址。更多資訊請查閱{linkstart}文件 ↗{linkend}。", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached是用於分散式緩存的設置,但是目前安裝了錯誤的PHP模組為「memcache」。\\OC\\Memcache\\Memcached僅支援「memcached」而不是「memcache」。請參閱 {linkstart}memcached wiki了解兩種模組資訊 ↗{linkend}。", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "部份檔案未通過完整性檢查。更多關於如何解決此問題的資訊可在{linkstart1}文件 ↗{linkend}中找到。({linkstart2}無效檔案列表……{linkend} / {linkstart3}重新掃描……{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "PHP 的 OPcache 模組並未被載入。{linkstart}為了提供更好的效能,建議 ↗{linkend}將此 PHP 模組載入。", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "無法取得 PHP 中的 \"set_time_limit\" 函式。這可能導致執行過程被終止並造成不完整安裝。我們強烈建議啟用該函式。", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "您的 PHP 並未啟用 FreeType 支援,導致大頭貼產生器和設定界面無法使用。", "Missing index \"{indexName}\" in table \"{tableName}\"." : "在資料表 \"{tableName}\" 中,找不到索引值 \"{indexName}\" 。", @@ -80,16 +92,24 @@ OC.L10N.register( "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "資料庫遺失了一些欄位,然而新增欄位這個動作將在龐大的表中花費許多時間,因此它們並不會被自動新增。藉由執行 \"occ db:add-missing-columns\" 手動新增欄位將能在系統持續運作時修復這個問題。新增這些欄位將提高系統回應速度和可用性。", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "您的 Nextcloud 缺少了某些建議的 PHP 模組。為了提升效能與相容性,強烈建議您安裝這些 PHP 模組。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "系統安裝的 php-imagick 不支援 SVG,為了更好的相容性,建議安裝它。", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "資料庫的有些欄位缺少 big int 格式轉換。因為攔位格式轉換需要一些時間,所以沒有自動轉換。你可以執行 \"occ db:convert-filecache-bigin\" 手動完成轉換,轉換時 Nextcloud 服務必須處於離線狀態。詳情請參閱{linkstart}關於這個問題的文件頁面 ↗{linkend}。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端資料庫使用 SQLite,在大型服務當中,我們建議您使用其他的資料庫後端。", "This is particularly recommended when using the desktop client for file synchronisation." : "若您使用電腦客戶端來同步檔案,非常建議您這麼做。", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "若要遷移至另一個資料庫,請使用命令列工具: 'occ db:convert-type' ,或是查閱{linkstart}文件 ↗{linkend}。", "The PHP memory limit is below the recommended value of 512MB." : "目前的 PHP 的記憶體限制設定低於建議值 512MB。", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "某些應用程式的資料夾所有者與網頁伺服器預設使用者不同。這可能是因為您手動安裝了這些應用程式。請檢查以下應用程式資料夾的相關權限:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "您的 MySQL 資料庫並不支援 4-byte 的字元。為了能處理檔案名稱中,或是註記中的 4-byte 的字元(如表情符號等)。建議您啟用 MySQL 中支援 4-byte 的字元的功能。詳情請見{linkstart}此文件中關於此項目的說明 ↗{linkend}。", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "此站台使用 Amazon S3 物件儲存為主要儲存區。上傳檔案會暫存在伺服器,因此建議 PHP 的暫存資料夾最少要有 50 GB 可用容量。請在登錄檔中查閱關於資料夾路徑及可用容量的詳細資訊。要增進效能,請在 php.ini 中變更暫存資料夾位置,或將該資料夾容量增加。", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "你經由安全的連線存取系統,但系統卻生成了不安全的 URL。這很有可能是因為你使用了反向代理伺服器,但反向代理伺服器的改寫規則並未正常工作,請閱讀{linkstart}關於此問題的文件頁面 ↗{linkend}。", "Error occurred while checking server setup" : "檢查伺服器設定時發生錯誤", + "For more details see the {linkstart}documentation ↗{linkend}." : "更多詳細資訊請見{linkstart}文件 ↗{linkend}。", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "您的資料目錄和檔案看來可以被公開存取,這表示 .htaccess 設定檔並未生效,我們強烈建議您設定網頁伺服器,拒絕公開存取資料目錄,或者將您的資料目錄移出網頁伺服器根目錄。", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 \"{header}\" 標頭設定並不是 \"{expected}\",這是一個潛在的安全性和隱私風險,我們建議調整此項設定。", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 \"{header}\" 標頭設定並不是 \"{expected}\",這將讓某些功能無法正常運作,我們建議調整此項設定。", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 \"{header}\" 標頭設定並不包含 \"{expected}\" ,這是一個潛在的安全性和隱私風險,我們建議調整此項設定。", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "目前 HTTP 的 \"{header}\" 標頭設定並不是 \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" 或 \"{val5}\",這將會洩漏一些訊息。{linkstart}請參考 W3C 建議文件 ↗{linkend}。", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "HTTP \"Strict-Transport-Security\" 標頭並未被設定持續至少{seconds}秒。為了提高安全性,我們在{linkstart}安全建議 ↗{linkend}中有詳述並建議啟用 HSTS。", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "您正在透過不安全的 HTTP 存取網站,強烈建議您設定您的伺服器啟用 HTTPS,更多資訊請查閱{linkstart}安全建議 ↗{linkend}。", "unknown text" : "未知的文字", "Hello world!" : "哈囉,世界!", "sunny" : "晴朗的", diff --git a/core/l10n/zh_TW.json b/core/l10n/zh_TW.json index 6fbcc54f44e..c0ee3402945 100644 --- a/core/l10n/zh_TW.json +++ b/core/l10n/zh_TW.json @@ -59,15 +59,27 @@ "The following apps have been disabled: %s" : "以下應用程式已經被停用:%s", "Already up to date" : "此版本為最新版本", "Your web server is not yet properly set up to allow file synchronization, because the WebDAV interface seems to be broken." : "WebDAV 介面似乎為故障狀態,導致您的網頁伺服器無法提供檔案同步功能。", + "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的網頁伺服器設定不正確,因此無法解析「{url}」。更多資訊可在{linkstart}文件 ↗{linkend}中找到。", + "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "您的伺服器並未正確的設定解析「{url}」。這可能與伺服器的設定未更新為直接傳送此資料夾有關。請檢查 Apache 的 \".htaccess\" 檔案,或在 Nginx 中的{linkstart}文件頁面 ↗{linkend}中查閱重寫規則。在 Nginx 環境中,通常是在由 \"location ~\" 開始的那行需要做調整。", + "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "您的伺服器並未正確的設定,因此無法傳遞 .woff2 的檔案。這通常是因為 Nginx 的設定問題所導致。在 Nextcloud 15 中,需要一些調整才能一並傳遞 .woff2 的檔案。請檢查您的 Nginx 設定,和 Nextcloud {linkstart}說明文件 ↗{linkend}中提到的建議設定。", "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整,導致無法正確取得系統環境變數,因為偵測到 getenv(\"PATH\") 回傳資料為空值", + "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "請參考{linkstart}安裝文件 ↗{linkend}中 PHP 設定的註記,並檢查您伺服器上的 PHP 設定,特別是如果您是使用 php-fpm 的情況下。", "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用,這樣可以防止來自網頁端的設定操作,每次需要更改設定時,都需要手動將設定檔暫時改為可讀寫。", "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的資料庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時,這可能會造成問題。", "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未偵測到 PHP 模組 \"fileinfo\"。強烈建議啟用這個模組,以取得最好的 MIME 檔案類型偵測支援。", + "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "事務型文件鎖定的功能已經取消,這可能會造成競態條件,請在 config.php 中啟用 \"filelocking.enabled\" 以避免出現這樣的問題,請參考{linkstart}文件 ↗{linkend}來了解更多的資訊。", "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "如果您的安裝路徑不在網域的最上層,並且使用 cron 作為排程器,URL 的生成可能會有問題,為了避免這樣的狀況,請您在 config.php 檔案裡設定 overwrite.cli.url 為您安裝的 webroot 路徑。(建議值:\"{suggestedOverwriteCliURL}\")", "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "你並未設定手機國際冠碼。設定後使用者在個人檔案設定手機號碼時不必再輸入國際冠碼。若要這樣做,請新增「default_phone_region」於設定檔,允許的國家及地區請參閱 {linkstart}ISO 3166-1 code ↗{linkend} 清單。", "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : " 無法透過 CLI 來執行排程工作,發生以下技術性錯誤:", "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "伺服器沒有網際網路連線(無法與多個端點取得聯繫),有些功能,像是外部儲存、應用程式更新版通知將無法運作。從遠端存取資料或是寄送電子郵件通知可能也無法運作。建議您設定好網際網路連線以使用所有功能。", + "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "您沒有設定記憶體快取,如果可以,請設定 memcache 來提升效能。更多資訊請查閱{linkstart}文件 ↗{linkend}。", + "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP 無法取得合適的亂數產生源。為了安全性考量,不建議如此做。更多資訊參考{linkstart}文件 ↗{linkend}。", + "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您目前正執行 PHP {version} ,我們建議您升級 PHP 到您的散佈版所支援的最新版本,以取得 {linkstart}PHP 開發團隊提供的效能與安全性更新 ↗{linkend}。", "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 將是支援 PHP 7.2 的最後一個版本,Nextcloud 21 僅支援 PHP 7.3 以上的 PHP。", + "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "偵測到您的反向代理標頭設定不正確,但也有可能是因為您目前正透過信任的代理伺服器存取 Nextcloud。若您目前不是透過信任的代理伺服器存取 Nextcloud,這就是一個安全性問題,允許攻擊者對 Nextcloud 假冒 IP 位址。更多資訊請查閱{linkstart}文件 ↗{linkend}。", + "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached是用於分散式緩存的設置,但是目前安裝了錯誤的PHP模組為「memcache」。\\OC\\Memcache\\Memcached僅支援「memcached」而不是「memcache」。請參閱 {linkstart}memcached wiki了解兩種模組資訊 ↗{linkend}。", + "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "部份檔案未通過完整性檢查。更多關於如何解決此問題的資訊可在{linkstart1}文件 ↗{linkend}中找到。({linkstart2}無效檔案列表……{linkend} / {linkstart3}重新掃描……{linkend})", + "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "PHP 的 OPcache 模組並未被載入。{linkstart}為了提供更好的效能,建議 ↗{linkend}將此 PHP 模組載入。", "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "無法取得 PHP 中的 \"set_time_limit\" 函式。這可能導致執行過程被終止並造成不完整安裝。我們強烈建議啟用該函式。", "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "您的 PHP 並未啟用 FreeType 支援,導致大頭貼產生器和設定界面無法使用。", "Missing index \"{indexName}\" in table \"{tableName}\"." : "在資料表 \"{tableName}\" 中,找不到索引值 \"{indexName}\" 。", @@ -78,16 +90,24 @@ "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "資料庫遺失了一些欄位,然而新增欄位這個動作將在龐大的表中花費許多時間,因此它們並不會被自動新增。藉由執行 \"occ db:add-missing-columns\" 手動新增欄位將能在系統持續運作時修復這個問題。新增這些欄位將提高系統回應速度和可用性。", "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "您的 Nextcloud 缺少了某些建議的 PHP 模組。為了提升效能與相容性,強烈建議您安裝這些 PHP 模組。", "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "系統安裝的 php-imagick 不支援 SVG,為了更好的相容性,建議安裝它。", + "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "資料庫的有些欄位缺少 big int 格式轉換。因為攔位格式轉換需要一些時間,所以沒有自動轉換。你可以執行 \"occ db:convert-filecache-bigin\" 手動完成轉換,轉換時 Nextcloud 服務必須處於離線狀態。詳情請參閱{linkstart}關於這個問題的文件頁面 ↗{linkend}。", "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "目前您的後端資料庫使用 SQLite,在大型服務當中,我們建議您使用其他的資料庫後端。", "This is particularly recommended when using the desktop client for file synchronisation." : "若您使用電腦客戶端來同步檔案,非常建議您這麼做。", + "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "若要遷移至另一個資料庫,請使用命令列工具: 'occ db:convert-type' ,或是查閱{linkstart}文件 ↗{linkend}。", "The PHP memory limit is below the recommended value of 512MB." : "目前的 PHP 的記憶體限制設定低於建議值 512MB。", "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "某些應用程式的資料夾所有者與網頁伺服器預設使用者不同。這可能是因為您手動安裝了這些應用程式。請檢查以下應用程式資料夾的相關權限:", + "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "您的 MySQL 資料庫並不支援 4-byte 的字元。為了能處理檔案名稱中,或是註記中的 4-byte 的字元(如表情符號等)。建議您啟用 MySQL 中支援 4-byte 的字元的功能。詳情請見{linkstart}此文件中關於此項目的說明 ↗{linkend}。", "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "此站台使用 Amazon S3 物件儲存為主要儲存區。上傳檔案會暫存在伺服器,因此建議 PHP 的暫存資料夾最少要有 50 GB 可用容量。請在登錄檔中查閱關於資料夾路徑及可用容量的詳細資訊。要增進效能,請在 php.ini 中變更暫存資料夾位置,或將該資料夾容量增加。", + "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "你經由安全的連線存取系統,但系統卻生成了不安全的 URL。這很有可能是因為你使用了反向代理伺服器,但反向代理伺服器的改寫規則並未正常工作,請閱讀{linkstart}關於此問題的文件頁面 ↗{linkend}。", "Error occurred while checking server setup" : "檢查伺服器設定時發生錯誤", + "For more details see the {linkstart}documentation ↗{linkend}." : "更多詳細資訊請見{linkstart}文件 ↗{linkend}。", "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "您的資料目錄和檔案看來可以被公開存取,這表示 .htaccess 設定檔並未生效,我們強烈建議您設定網頁伺服器,拒絕公開存取資料目錄,或者將您的資料目錄移出網頁伺服器根目錄。", "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 \"{header}\" 標頭設定並不是 \"{expected}\",這是一個潛在的安全性和隱私風險,我們建議調整此項設定。", "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 \"{header}\" 標頭設定並不是 \"{expected}\",這將讓某些功能無法正常運作,我們建議調整此項設定。", "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "目前 HTTP 的 \"{header}\" 標頭設定並不包含 \"{expected}\" ,這是一個潛在的安全性和隱私風險,我們建議調整此項設定。", + "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "目前 HTTP 的 \"{header}\" 標頭設定並不是 \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" 或 \"{val5}\",這將會洩漏一些訊息。{linkstart}請參考 W3C 建議文件 ↗{linkend}。", + "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "HTTP \"Strict-Transport-Security\" 標頭並未被設定持續至少{seconds}秒。為了提高安全性,我們在{linkstart}安全建議 ↗{linkend}中有詳述並建議啟用 HSTS。", + "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "您正在透過不安全的 HTTP 存取網站,強烈建議您設定您的伺服器啟用 HTTPS,更多資訊請查閱{linkstart}安全建議 ↗{linkend}。", "unknown text" : "未知的文字", "Hello world!" : "哈囉,世界!", "sunny" : "晴朗的", |