[tx-robot] updated from transifex

Signed-off-by: Nextcloud bot <bot@nextcloud.com>

14 files changed, 56 insertions, 4 deletions

diff --git a/l10n/cs.js b/l10n/cs.js
index d175bcd..d60b292 100644
--- a/l10n/cs.js
+++ b/l10n/cs.js
@@ -65,6 +65,7 @@ OC.L10N.register(
     "External monitoring tool" : "Externí nástroj pro dohledování",
     "You can connect an external monitoring tool by using this end point" : "Externí dohledovací nástroj je možné napojit pomocí tohoto koncového bodu",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Přidání „?format=json“ na konec URL poskytne výsledek ve formátu JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Aby bylo možné použít přístupový token, vytvořte ho a pak nastavte pomocí následujícího příkazu",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Poté při dotazování výše uvedené URL předávejte se záhlavím „NC-Token“.",
     "Load average" : "Průměrné vytížení",
     "Last minute" : "za poslední minutu",
@@ -83,6 +84,7 @@ OC.L10N.register(
     "Upload max size:" : "Nejvyšší umožněná velikost nahrávaného souboru:",
     "Type:" : "Typ:",
     "Size:" : "Velikost:",
-    "You can connect an external monitoring tool by using this end point:" : "Externí dohledovací nástroj je možné napojit pomocí tohoto koncového bodu:"
+    "You can connect an external monitoring tool by using this end point:" : "Externí dohledovací nástroj je možné napojit pomocí tohoto koncového bodu:",
+    "To use an access token please generate one then set it using the following command:" : "Aby bylo možné použít přístupový token, vytvořte ho a pak nastavte pomocí následujícího příkazu:"
 },
 "nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;");
diff --git a/l10n/cs.json b/l10n/cs.json
index 67fa0c2..65cb6f0 100644
--- a/l10n/cs.json
+++ b/l10n/cs.json
@@ -63,6 +63,7 @@
     "External monitoring tool" : "Externí nástroj pro dohledování",
     "You can connect an external monitoring tool by using this end point" : "Externí dohledovací nástroj je možné napojit pomocí tohoto koncového bodu",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Přidání „?format=json“ na konec URL poskytne výsledek ve formátu JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Aby bylo možné použít přístupový token, vytvořte ho a pak nastavte pomocí následujícího příkazu",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Poté při dotazování výše uvedené URL předávejte se záhlavím „NC-Token“.",
     "Load average" : "Průměrné vytížení",
     "Last minute" : "za poslední minutu",
@@ -81,6 +82,7 @@
     "Upload max size:" : "Nejvyšší umožněná velikost nahrávaného souboru:",
     "Type:" : "Typ:",
     "Size:" : "Velikost:",
-    "You can connect an external monitoring tool by using this end point:" : "Externí dohledovací nástroj je možné napojit pomocí tohoto koncového bodu:"
+    "You can connect an external monitoring tool by using this end point:" : "Externí dohledovací nástroj je možné napojit pomocí tohoto koncového bodu:",
+    "To use an access token please generate one then set it using the following command:" : "Aby bylo možné použít přístupový token, vytvořte ho a pak nastavte pomocí následujícího příkazu:"
 },"pluralForm" :"nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;"
 }
\ No newline at end of file
diff --git a/l10n/de_DE.js b/l10n/de_DE.js
index 710cfd6..29f914f 100644
--- a/l10n/de_DE.js
+++ b/l10n/de_DE.js
@@ -65,6 +65,7 @@ OC.L10N.register(
     "External monitoring tool" : "Externes Überwachungsprogramm",
     "You can connect an external monitoring tool by using this end point" : "Durch Verwendung des folgenden Zugangspunktes kann ein externes Überwachungsprogramm verwendet werden",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Wenn Sie \"?format=json\" am Ende der URL anhängen, erhalten Sie das Ergebnis in JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Um ein Zugriffstoken zu verwenden, generieren Sie bitte eines und legen Sie es mit dem folgenden Befehl fest",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Übergeben Sie dann das Token mit dem Header \"NC-Token\" durch Aufrufen der obige URL.",
     "Load average" : "Durchschnittsauslastung",
     "Last minute" : "Letzte Minute",
diff --git a/l10n/de_DE.json b/l10n/de_DE.json
index ccf4982..bb2fdb6 100644
--- a/l10n/de_DE.json
+++ b/l10n/de_DE.json
@@ -63,6 +63,7 @@
     "External monitoring tool" : "Externes Überwachungsprogramm",
     "You can connect an external monitoring tool by using this end point" : "Durch Verwendung des folgenden Zugangspunktes kann ein externes Überwachungsprogramm verwendet werden",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Wenn Sie \"?format=json\" am Ende der URL anhängen, erhalten Sie das Ergebnis in JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Um ein Zugriffstoken zu verwenden, generieren Sie bitte eines und legen Sie es mit dem folgenden Befehl fest",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Übergeben Sie dann das Token mit dem Header \"NC-Token\" durch Aufrufen der obige URL.",
     "Load average" : "Durchschnittsauslastung",
     "Last minute" : "Letzte Minute",
diff --git a/l10n/it.js b/l10n/it.js
index 01b2dd1..bfae721 100644
--- a/l10n/it.js
+++ b/l10n/it.js
@@ -2,9 +2,15 @@ OC.L10N.register(
     "serverinfo",
     {
     "CPU info not available" : "Informazioni CPU non disponibili",
+    "Load average: {cpu} (last minute)" : "Carico medio: {cpu} (ultimo minuto)",
+    "RAM: Total: {memTotalBytes}/Current usage: {memUsageBytes}" : "RAM: Totale: {memTotalBytes}/Uso attuale: {memUsageBytes}",
+    "RAM info not available" : "Informazioni RAM non disponibili",
+    "SWAP: Total: {swapTotalBytes}/Current usage: {swapUsageBytes}" : "SWAP: Totale: {swapTotalBytes}/Uso attuale: {swapUsageBytes}",
+    "SWAP info not available" : "Informazioni SWAP non disponibili",
     "Users" : "Utenti",
     "Groups" : "Gruppi",
     "Links" : "Collegamenti",
+    "Emails" : "Email",
     "Federated sent" : "Federati inviati",
     "Federated received" : "Federati ricevuti",
     "Talk conversations" : "Conversazioni di Talk",
@@ -22,6 +28,7 @@ OC.L10N.register(
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Fornisce informazioni utili sul server, come carico della CPU, utilizzo della memoria, utilizzo del disco, numero di utenti, ecc.",
     "Operating System" : "Sistema operativo",
     "CPU" : "CPU",
+    "Unknown Processor" : "Processore sconosciuto",
     "Memory" : "Memoria",
     "Server time" : "Ora del server",
     "Uptime" : "Uptime",
@@ -33,6 +40,9 @@ OC.L10N.register(
     "Available" : "Disponibile",
     "Used" : "Utilizzati",
     "You will get a notification once one of your disks is nearly full." : "Riceverai una notifica quando uno dei dischi è prossimo alla capienza massima.",
+    "Files" : "File",
+    "Storages" : "Archiviazioni",
+    "Free Space" : "Spazio libero",
     "Network" : "Rete",
     "Hostname" : "Nome host",
     "DNS" : "DNS",
@@ -43,11 +53,19 @@ OC.L10N.register(
     "IPv4" : "IPv4",
     "IPv6" : "IPv6",
     "Active users" : "Utenti attivi",
+    "Total users" : "Utenti totali",
     "Shares" : "Condivisioni",
     "PHP" : "PHP",
+    "Version" : "Versione",
+    "Memory limit" : "Limite di memoria",
+    "Max execution time" : "Tempo massimo di esecuzione",
+    "Upload max size" : "Dimensione massima caricamento",
     "Database" : "Database",
+    "Type" : "Tipo",
     "External monitoring tool" : "Strumento di controllo esterno",
+    "You can connect an external monitoring tool by using this end point" : "Puoi collegare uno strumento di controllo esterno utilizzando questo terminatore",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "L'aggiunta di \"?format=json\" alla fine dell'URL ti fornirà il risultato in JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Per usare un token di accesso, generane uno e poi impostalo con il comando seguente",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Poi passa il token con l'intestazione \"NC-Token\" quando richiami l'URL qua sopra.",
     "Load average" : "Carico medio",
     "Last minute" : "Ultimo minuto",
@@ -66,6 +84,7 @@ OC.L10N.register(
     "Upload max size:" : "Dimensione massima caricamento:",
     "Type:" : "Tipo:",
     "Size:" : "Dimensione:",
-    "You can connect an external monitoring tool by using this end point:" : "Puoi collegare uno strumento di controllo esterno utilizzando questo terminatore: "
+    "You can connect an external monitoring tool by using this end point:" : "Puoi collegare uno strumento di controllo esterno utilizzando questo terminatore: ",
+    "To use an access token please generate one then set it using the following command:" : "Per usare un token di accesso, generane uno e poi impostalo con il comando seguente:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/l10n/it.json b/l10n/it.json
index 6306529..b32ed21 100644
--- a/l10n/it.json
+++ b/l10n/it.json
@@ -1,8 +1,14 @@
 { "translations": {
     "CPU info not available" : "Informazioni CPU non disponibili",
+    "Load average: {cpu} (last minute)" : "Carico medio: {cpu} (ultimo minuto)",
+    "RAM: Total: {memTotalBytes}/Current usage: {memUsageBytes}" : "RAM: Totale: {memTotalBytes}/Uso attuale: {memUsageBytes}",
+    "RAM info not available" : "Informazioni RAM non disponibili",
+    "SWAP: Total: {swapTotalBytes}/Current usage: {swapUsageBytes}" : "SWAP: Totale: {swapTotalBytes}/Uso attuale: {swapUsageBytes}",
+    "SWAP info not available" : "Informazioni SWAP non disponibili",
     "Users" : "Utenti",
     "Groups" : "Gruppi",
     "Links" : "Collegamenti",
+    "Emails" : "Email",
     "Federated sent" : "Federati inviati",
     "Federated received" : "Federati ricevuti",
     "Talk conversations" : "Conversazioni di Talk",
@@ -20,6 +26,7 @@
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Fornisce informazioni utili sul server, come carico della CPU, utilizzo della memoria, utilizzo del disco, numero di utenti, ecc.",
     "Operating System" : "Sistema operativo",
     "CPU" : "CPU",
+    "Unknown Processor" : "Processore sconosciuto",
     "Memory" : "Memoria",
     "Server time" : "Ora del server",
     "Uptime" : "Uptime",
@@ -31,6 +38,9 @@
     "Available" : "Disponibile",
     "Used" : "Utilizzati",
     "You will get a notification once one of your disks is nearly full." : "Riceverai una notifica quando uno dei dischi è prossimo alla capienza massima.",
+    "Files" : "File",
+    "Storages" : "Archiviazioni",
+    "Free Space" : "Spazio libero",
     "Network" : "Rete",
     "Hostname" : "Nome host",
     "DNS" : "DNS",
@@ -41,11 +51,19 @@
     "IPv4" : "IPv4",
     "IPv6" : "IPv6",
     "Active users" : "Utenti attivi",
+    "Total users" : "Utenti totali",
     "Shares" : "Condivisioni",
     "PHP" : "PHP",
+    "Version" : "Versione",
+    "Memory limit" : "Limite di memoria",
+    "Max execution time" : "Tempo massimo di esecuzione",
+    "Upload max size" : "Dimensione massima caricamento",
     "Database" : "Database",
+    "Type" : "Tipo",
     "External monitoring tool" : "Strumento di controllo esterno",
+    "You can connect an external monitoring tool by using this end point" : "Puoi collegare uno strumento di controllo esterno utilizzando questo terminatore",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "L'aggiunta di \"?format=json\" alla fine dell'URL ti fornirà il risultato in JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Per usare un token di accesso, generane uno e poi impostalo con il comando seguente",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Poi passa il token con l'intestazione \"NC-Token\" quando richiami l'URL qua sopra.",
     "Load average" : "Carico medio",
     "Last minute" : "Ultimo minuto",
@@ -64,6 +82,7 @@
     "Upload max size:" : "Dimensione massima caricamento:",
     "Type:" : "Tipo:",
     "Size:" : "Dimensione:",
-    "You can connect an external monitoring tool by using this end point:" : "Puoi collegare uno strumento di controllo esterno utilizzando questo terminatore: "
+    "You can connect an external monitoring tool by using this end point:" : "Puoi collegare uno strumento di controllo esterno utilizzando questo terminatore: ",
+    "To use an access token please generate one then set it using the following command:" : "Per usare un token di accesso, generane uno e poi impostalo con il comando seguente:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/l10n/pl.js b/l10n/pl.js
index e6d85c0..58a0ab6 100644
--- a/l10n/pl.js
+++ b/l10n/pl.js
@@ -65,6 +65,7 @@ OC.L10N.register(
     "External monitoring tool" : "Zewnętrzne narzędzie monitorujące",
     "You can connect an external monitoring tool by using this end point" : "Możesz podłączyć zewnętrzne narzędzie do monitorowania, używając tego punktu końcowego",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Dołączenie \"?format=json\" na końcu adresu URL daje wynik w formacie JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Aby użyć tokena dostępu, wygeneruj go, a następnie ustaw za pomocą następującego polecenia",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Następnie przekaż token z nagłówkiem \"NC-Token\" podczas odpytywania powyższego adresu URL.",
     "Load average" : "Średnie obciążenie",
     "Last minute" : "Ostatnia minuta",
diff --git a/l10n/pl.json b/l10n/pl.json
index 7ec4cd2..a507de3 100644
--- a/l10n/pl.json
+++ b/l10n/pl.json
@@ -63,6 +63,7 @@
     "External monitoring tool" : "Zewnętrzne narzędzie monitorujące",
     "You can connect an external monitoring tool by using this end point" : "Możesz podłączyć zewnętrzne narzędzie do monitorowania, używając tego punktu końcowego",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Dołączenie \"?format=json\" na końcu adresu URL daje wynik w formacie JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Aby użyć tokena dostępu, wygeneruj go, a następnie ustaw za pomocą następującego polecenia",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Następnie przekaż token z nagłówkiem \"NC-Token\" podczas odpytywania powyższego adresu URL.",
     "Load average" : "Średnie obciążenie",
     "Last minute" : "Ostatnia minuta",
diff --git a/l10n/sk.js b/l10n/sk.js
index 5575def..18eeb31 100644
--- a/l10n/sk.js
+++ b/l10n/sk.js
@@ -65,6 +65,7 @@ OC.L10N.register(
     "External monitoring tool" : "Externý sledovací nástroj",
     "You can connect an external monitoring tool by using this end point" : "Pre pripojenie externého sledovacieho nástroja použite tento koncový bod",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Ak na koniec adresy URL pridáte „?format = json“, získate výsledok v JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Pre používanie prístupového tokenu ho vygenerujte a potom ho nastavte použitím nasledujúceho príkazu",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Pri dotazovaní na vyššie uvedenú adresu URL potom poslať token s hlavičkou „NC-Token“.",
     "Load average" : "Priemerné zaťaženie",
     "Last minute" : "Posledná minúta",
diff --git a/l10n/sk.json b/l10n/sk.json
index 20bb231..b778094 100644
--- a/l10n/sk.json
+++ b/l10n/sk.json
@@ -63,6 +63,7 @@
     "External monitoring tool" : "Externý sledovací nástroj",
     "You can connect an external monitoring tool by using this end point" : "Pre pripojenie externého sledovacieho nástroja použite tento koncový bod",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Ak na koniec adresy URL pridáte „?format = json“, získate výsledok v JSON.",
+    "To use an access token, please generate one then set it using the following command" : "Pre používanie prístupového tokenu ho vygenerujte a potom ho nastavte použitím nasledujúceho príkazu",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Pri dotazovaní na vyššie uvedenú adresu URL potom poslať token s hlavičkou „NC-Token“.",
     "Load average" : "Priemerné zaťaženie",
     "Last minute" : "Posledná minúta",
diff --git a/l10n/zh_CN.js b/l10n/zh_CN.js
index 7ed9afc..6fde4f3 100644
--- a/l10n/zh_CN.js
+++ b/l10n/zh_CN.js
@@ -65,6 +65,7 @@ OC.L10N.register(
     "External monitoring tool" : "外部监控工具",
     "You can connect an external monitoring tool by using this end point" : "您可以使用此端点连接外部监视工具",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在 URL 末尾附加 \"?format=json\" 会为您提供 JSON 结果。",
+    "To use an access token, please generate one then set it using the following command" : "要使用访问令牌，请生成一个，然后使用以下命令设置它",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然后在查询上述 URL 时传递带有 “NC-Token” 头的令牌。",
     "Load average" : "平均负载",
     "Last minute" : "上一分钟",
diff --git a/l10n/zh_CN.json b/l10n/zh_CN.json
index a9ce2f9..d6007f8 100644
--- a/l10n/zh_CN.json
+++ b/l10n/zh_CN.json
@@ -63,6 +63,7 @@
     "External monitoring tool" : "外部监控工具",
     "You can connect an external monitoring tool by using this end point" : "您可以使用此端点连接外部监视工具",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在 URL 末尾附加 \"?format=json\" 会为您提供 JSON 结果。",
+    "To use an access token, please generate one then set it using the following command" : "要使用访问令牌，请生成一个，然后使用以下命令设置它",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然后在查询上述 URL 时传递带有 “NC-Token” 头的令牌。",
     "Load average" : "平均负载",
     "Last minute" : "上一分钟",
diff --git a/l10n/zh_HK.js b/l10n/zh_HK.js
index 09dd470..2b55f4c 100644
--- a/l10n/zh_HK.js
+++ b/l10n/zh_HK.js
@@ -65,6 +65,7 @@ OC.L10N.register(
     "External monitoring tool" : "外部監控工具",
     "You can connect an external monitoring tool by using this end point" : "您可以使用此終端連接外部監視工具",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在URL後面連接參數 \"?format=json\" 將會得到json格式的回傳結果。",
+    "To use an access token, please generate one then set it using the following command" : "要使用存取權杖，請生成一個權杖，然後使用以下命令對其進行設置",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然後在查詢上述 URL 時將權杖與 “ NC-Token” 標頭一起傳遞。",
     "Load average" : "平均負載",
     "Last minute" : "最後一分鐘",
diff --git a/l10n/zh_HK.json b/l10n/zh_HK.json
index 27cff90..0dbb20f 100644
--- a/l10n/zh_HK.json
+++ b/l10n/zh_HK.json
@@ -63,6 +63,7 @@
     "External monitoring tool" : "外部監控工具",
     "You can connect an external monitoring tool by using this end point" : "您可以使用此終端連接外部監視工具",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在URL後面連接參數 \"?format=json\" 將會得到json格式的回傳結果。",
+    "To use an access token, please generate one then set it using the following command" : "要使用存取權杖，請生成一個權杖，然後使用以下命令對其進行設置",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然後在查詢上述 URL 時將權杖與 “ NC-Token” 標頭一起傳遞。",
     "Load average" : "平均負載",
     "Last minute" : "最後一分鐘",