Various doc tweaks (2-spaces vs tabs, EOL-whitespace, repl prompt, "world" vs "World", etc...)

15 files changed, 98 insertions, 98 deletions

diff --git a/doc/api/addons.markdown b/doc/api/addons.markdown
index 29e44023a1f..115bd078d75 100644
--- a/doc/api/addons.markdown
+++ b/doc/api/addons.markdown
@@ -40,10 +40,10 @@ To get started we create a file `hello.cc`:
     using namespace v8;
 
     extern "C" void
-    init (Handle<Object> target) 
+    init (Handle<Object> target)
     {
       HandleScope scope;
-      target->Set(String::New("hello"), String::New("World"));
+      target->Set(String::New("hello"), String::New("world"));
     }
 
 This source code needs to be built into `hello.node`, the binary Addon. To
diff --git a/doc/api/assert.markdown b/doc/api/assert.markdown
index 389fce2fc02..e6511445ffb 100644
--- a/doc/api/assert.markdown
+++ b/doc/api/assert.markdown
@@ -13,7 +13,7 @@ Tests if value is a `true` value, it is equivalent to `assert.equal(true, value,
 
 ### assert.equal(actual, expected, [message])
 
-Tests shallow, coercive equality with the equal comparison operator ( `==` ). 
+Tests shallow, coercive equality with the equal comparison operator ( `==` ).
 
 ### assert.notEqual(actual, expected, [message])
 
@@ -25,15 +25,15 @@ Tests for deep equality.
 
 ### assert.notDeepEqual(actual, expected, [message])
 
-Tests for any deep inequality. 
+Tests for any deep inequality.
 
 ### assert.strictEqual(actual, expected, [message])
 
-Tests strict equality, as determined by the strict equality operator ( `===` ) 
+Tests strict equality, as determined by the strict equality operator ( `===` )
 
 ### assert.notStrictEqual(actual, expected, [message])
 
-Tests strict non-equality, as determined by the strict not equal operator ( `!==` ) 
+Tests strict non-equality, as determined by the strict not equal operator ( `!==` )
 
 ### assert.throws(block, [error], [message])
 
diff --git a/doc/api/buffers.markdown b/doc/api/buffers.markdown
index 33fbed55843..782f6015945 100644
--- a/doc/api/buffers.markdown
+++ b/doc/api/buffers.markdown
@@ -53,7 +53,7 @@ Example: write a utf8 string into a buffer, then print it
     console.log(len + " bytes: " + buf.toString('utf8', 0, len));
 
     // 12 bytes: ½ + ¼ = ¾
-    
+
 
 ### buffer.toString(encoding, start=0, end=buffer.length)
 
@@ -84,7 +84,7 @@ Example: copy an ASCII string into a buffer, one byte at a time:
 
 ### Buffer.byteLength(string, encoding='utf8')
 
-Gives the actual byte length of a string.  This is not the same as 
+Gives the actual byte length of a string.  This is not the same as
 `String.prototype.length` since that returns the number of *characters* in a
 string.
 
@@ -101,7 +101,7 @@ Example:
 ### buffer.length
 
 The size of the buffer in bytes.  Note that this is not necessarily the size
-of the contents. `length` refers to the amount of memory allocated for the 
+of the contents. `length` refers to the amount of memory allocated for the
 buffer object.  It does not change when the contents of the buffer are changed.
 
     buf = new Buffer(1234);
@@ -122,7 +122,7 @@ into `buf2`, starting at the 8th byte in `buf2`.
 
     buf1 = new Buffer(26);
     buf2 = new Buffer(26);
-  
+
     for (var i = 0 ; i < 26 ; i++) {
       buf1[i] = i + 97; // 97 is ASCII a
       buf2[i] = 33; // ASCII !
@@ -132,7 +132,7 @@ into `buf2`, starting at the 8th byte in `buf2`.
     console.log(buf2.toString('ascii', 0, 25));
 
     // !!!!!!!!qrst!!!!!!!!!!!!!
-    
+
 
 ### buffer.slice(start, end=buffer.length)
 
diff --git a/doc/api/child_processes.markdown b/doc/api/child_processes.markdown
index 2b67993c9a4..efbadb0b3ff 100644
--- a/doc/api/child_processes.markdown
+++ b/doc/api/child_processes.markdown
@@ -145,7 +145,7 @@ output, and return it all in a callback.
         exec  = require('child_process').exec,
         child;
 
-    child = exec('cat *.js bad_file | wc -l', 
+    child = exec('cat *.js bad_file | wc -l',
       function (error, stdout, stderr) {
         console.log('stdout: ' + stdout);
         console.log('stderr: ' + stderr);
diff --git a/doc/api/dgram.markdown b/doc/api/dgram.markdown
index 6b18d657884..a125fa887f6 100644
--- a/doc/api/dgram.markdown
+++ b/doc/api/dgram.markdown
@@ -1,6 +1,6 @@
 ## dgram
 
-Datagram sockets are available through `require('dgram')`.  Datagrams are most commonly 
+Datagram sockets are available through `require('dgram')`.  Datagrams are most commonly
 handled as IP/UDP messages, but they can also be used over Unix domain sockets.
 
 ### Event: 'message'
@@ -27,7 +27,7 @@ on this socket.
 ### dgram.createSocket(type, [callback])
 
 Creates a datagram socket of the specified types.  Valid types are:
-`udp4`, `udp6`, and `unix_dgram`.  
+`udp4`, `udp6`, and `unix_dgram`.
 
 Takes an optional callback which is added as a listener for `message` events.
 
@@ -35,7 +35,7 @@ Takes an optional callback which is added as a listener for `message` events.
 
 For Unix domain datagram sockets, the destination address is a pathname in the filesystem.
 An optional callback may be supplied that is invoked after the `sendto` call is completed
-by the OS.  It is not safe to re-use `buf` until the callback is invoked.  Note that 
+by the OS.  It is not safe to re-use `buf` until the callback is invoked.  Note that
 unless the socket is bound to a pathname with `bind()` there is no way to receive messages
 on this socket.
 
@@ -55,7 +55,7 @@ Example of sending a message to syslogd on OSX via Unix domain socket `/var/run/
 ### dgram.send(buf, offset, length, port, address, [callback])
 
 For UDP sockets, the destination port and IP address must be specified.  A string
-may be supplied for the `address` parameter, and it will be resolved with DNS.  An 
+may be supplied for the `address` parameter, and it will be resolved with DNS.  An
 optional callback may be specified to detect any DNS errors and when `buf` may be
 re-used.  Note that DNS lookups will delay the time that a send takes place, at
 least until the next tick.  The only way to know for sure that a send has taken place
@@ -143,12 +143,12 @@ Example of a UDP server listening on port 41234:
 
 ### dgram.close()
 
-Close the underlying socket and stop listening for data on it.  UDP sockets 
+Close the underlying socket and stop listening for data on it.  UDP sockets
 automatically listen for messages, even if they did not call `bind()`.
 
 ### dgram.address()
 
-Returns an object containing the address information for a socket.  For UDP sockets, 
+Returns an object containing the address information for a socket.  For UDP sockets,
 this object will contain `address` and `port`.  For Unix domain sockets, it will contain
 only `address`.
 
@@ -160,9 +160,9 @@ may be sent to a local interface's broadcast address.
 ### dgram.setTTL(ttl)
 
 Sets the `IP_TTL` socket option.  TTL stands for "Time to Live," but in this context it
-specifies the number of IP hops that a packet is allowed to go through.  Each router or 
+specifies the number of IP hops that a packet is allowed to go through.  Each router or
 gateway that forwards a packet decrements the TTL.  If the TTL is decremented to 0 by a
-router, it will not be forwarded.  Changing TTL values is typically done for network 
+router, it will not be forwarded.  Changing TTL values is typically done for network
 probes or when multicasting.
 
 The argument to `setTTL()` is a number of hops between 1 and 255.  The default on most
diff --git a/doc/api/dns.markdown b/doc/api/dns.markdown
index b55f93de6b0..fc9765589ee 100644
--- a/doc/api/dns.markdown
+++ b/doc/api/dns.markdown
@@ -54,8 +54,8 @@ the error in English.
 
 ### dns.resolve4(domain, callback)
 
-The same as `dns.resolve()`, but only for IPv4 queries (`A` records). 
-`addresses` is an array of IPv4 addresses (e.g.  
+The same as `dns.resolve()`, but only for IPv4 queries (`A` records).
+`addresses` is an array of IPv4 addresses (e.g.
 `['74.125.79.104', '74.125.79.105', '74.125.79.106']`).
 
 ### dns.resolve6(domain, callback)
@@ -80,14 +80,14 @@ The same as `dns.resolve()`, but only for text queries (`TXT` records).
 
 The same as `dns.resolve()`, but only for service records (`SRV` records).
 `addresses` is an array of the SRV records available for `domain`. Properties
-of SRV records are priority, weight, port, and name (e.g., 
+of SRV records are priority, weight, port, and name (e.g.,
 `[{'priority': 10, {'weight': 5, 'port': 21223, 'name': 'service.example.com'}, ...]`).
 
 ### dns.reverse(ip, callback)
 
 Reverse resolves an ip address to an array of domain names.
 
-The callback has arguments `(err, domains)`. 
+The callback has arguments `(err, domains)`.
 
 If there an an error, `err` will be non-null and an instanceof the Error
 object.
diff --git a/doc/api/events.markdown b/doc/api/events.markdown
index 85715a73505..e069559bbde 100644
--- a/doc/api/events.markdown
+++ b/doc/api/events.markdown
@@ -1,11 +1,11 @@
 ## Events
 
 Many objects in Node emit events: a `net.Server` emits an event each time
-a peer connects to it, a `fs.readStream` emits an event when the file is 
+a peer connects to it, a `fs.readStream` emits an event when the file is
 opened. All objects which emit events are instances of `events.EventEmitter`.
 You can access this module by doing: `require("events");`
 
-Typically, event names are represented by a camel-cased string, however, 
+Typically, event names are represented by a camel-cased string, however,
 there aren't any strict restrictions on that, as any string will be accepted.
 
 Functions can be then be attached to objects, to be executed when an event
@@ -16,9 +16,9 @@ is emitted. These functions are called _listeners_.
 
 To access the EventEmitter class, `require('events').EventEmitter`.
 
-When an `EventEmitter` instance experiences an error, the typical action is 
+When an `EventEmitter` instance experiences an error, the typical action is
 to emit an `'error'` event.  Error events are treated as a special case in node.
-If there is no listener for it, then the default action is to print a stack 
+If there is no listener for it, then the default action is to print a stack
 trace and exit the program.
 
 All EventEmitters emit the event `'newListener'` when new listeners are
@@ -29,9 +29,9 @@ added.
 
 Adds a listener to the end of the listeners array for the specified event.
 
-	server.on('connection', function (stream) {
-		console.log('someone connected!');
-	});
+    server.on('connection', function (stream) {
+      console.log('someone connected!');
+    });
 
 #### emitter.once(event, listener)
 
@@ -39,21 +39,21 @@ Adds a **one time** listener for the event. The listener is
 invoked only the first time the event is fired, after which
 it is removed.
 
-	server.once('connection', function (stream) {
-		console.log('Ah, we have our first user!');
-	});
+    server.once('connection', function (stream) {
+      console.log('Ah, we have our first user!');
+    });
 
 #### emitter.removeListener(event, listener)
 
 Remove a listener from the listener array for the specified event.
 **Caution**: changes array indices in the listener array behind the listener.
 
-	var callback = function(stream) {
-		console.log('someone connected!');
-	};
-	server.on('connection', callback);
-	// ...
-	server.removeListener('connection', callback);
+    var callback = function(stream) {
+      console.log('someone connected!');
+    };
+    server.on('connection', callback);
+    // ...
+    server.removeListener('connection', callback);
 
 
 #### emitter.removeAllListeners(event)
@@ -66,10 +66,10 @@ Removes all listeners from the listener array for the specified event.
 Returns an array of listeners for the specified event. This array can be
 manipulated, e.g. to remove listeners.
 
-	server.on('connection', function (stream) {
-		console.log('someone connected!');
-	});
-	console.log(util.inspect(server.listeners('connection')); // [ [Function] ]
+    server.on('connection', function (stream) {
+      console.log('someone connected!');
+    });
+    console.log(util.inspect(server.listeners('connection')); // [ [Function] ]
 
 #### emitter.emit(event, [arg1], [arg2], [...])
 
diff --git a/doc/api/fs.markdown b/doc/api/fs.markdown
index 443380188a9..802cb0c7793 100644
--- a/doc/api/fs.markdown
+++ b/doc/api/fs.markdown
@@ -2,7 +2,7 @@
 
 File I/O is provided by simple wrappers around standard POSIX functions.  To
 use this module do `require('fs')`. All the methods have asynchronous and
-synchronous forms. 
+synchronous forms.
 
 The asynchronous form always take a completion callback as its last argument.
 The arguments passed to the completion callback depend on the method, but the
@@ -54,7 +54,7 @@ the entire process until they complete--halting all connections.
 
 ### fs.rename(path1, path2, [callback])
 
-Asynchronous rename(2). No arguments other than a possible exception are given 
+Asynchronous rename(2). No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.renameSync(path1, path2)
@@ -63,7 +63,7 @@ Synchronous rename(2).
 
 ### fs.truncate(fd, len, [callback])
 
-Asynchronous ftruncate(2). No arguments other than a possible exception are 
+Asynchronous ftruncate(2). No arguments other than a possible exception are
 given to the completion callback.
 
 ### fs.truncateSync(fd, len)
@@ -72,16 +72,16 @@ Synchronous ftruncate(2).
 
 ### fs.chmod(path, mode, [callback])
 
-Asynchronous chmod(2). No arguments other than a possible exception are given 
+Asynchronous chmod(2). No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.chmodSync(path, mode)
 
 Synchronous chmod(2).
-  
+
 ### fs.stat(path, [callback])
 
-Asynchronous stat(2). The callback gets two arguments `(err, stats)` where 
+Asynchronous stat(2). The callback gets two arguments `(err, stats)` where
 `stats` is a `fs.Stats` object. It looks like this:
 
     { dev: 2049,
@@ -102,14 +102,14 @@ See the `fs.Stats` section below for more information.
 
 ### fs.lstat(path, [callback])
 
-Asynchronous lstat(2). The callback gets two arguments `(err, stats)` where 
-`stats` is a `fs.Stats` object. lstat() is identical to stat(), except that if 
-path is a symbolic link, then the link itself is stat-ed, not the file that it 
+Asynchronous lstat(2). The callback gets two arguments `(err, stats)` where
+`stats` is a `fs.Stats` object. lstat() is identical to stat(), except that if
+path is a symbolic link, then the link itself is stat-ed, not the file that it
 refers to.
 
 ### fs.fstat(fd, [callback])
 
-Asynchronous fstat(2). The callback gets two arguments `(err, stats)` where 
+Asynchronous fstat(2). The callback gets two arguments `(err, stats)` where
 `stats` is a `fs.Stats` object.
 
 ### fs.statSync(path)
@@ -126,7 +126,7 @@ Synchronous fstat(2). Returns an instance of `fs.Stats`.
 
 ### fs.link(srcpath, dstpath, [callback])
 
-Asynchronous link(2). No arguments other than a possible exception are given to 
+Asynchronous link(2). No arguments other than a possible exception are given to
 the completion callback.
 
 ### fs.linkSync(dstpath, srcpath)
@@ -135,7 +135,7 @@ Synchronous link(2).
 
 ### fs.symlink(linkdata, path, [callback])
 
-Asynchronous symlink(2). No arguments other than a possible exception are given 
+Asynchronous symlink(2). No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.symlinkSync(linkdata, path)
@@ -144,8 +144,8 @@ Synchronous symlink(2).
 
 ### fs.readlink(path, [callback])
 
-Asynchronous readlink(2). The callback gets two arguments `(err, 
-resolvedPath)`. 
+Asynchronous readlink(2). The callback gets two arguments `(err,
+resolvedPath)`.
 
 ### fs.readlinkSync(path)
 
@@ -153,7 +153,7 @@ Synchronous readlink(2). Returns the resolved path.
 
 ### fs.realpath(path, [callback])
 
-Asynchronous realpath(2).  The callback gets two arguments `(err, 
+Asynchronous realpath(2).  The callback gets two arguments `(err,
 resolvedPath)`.
 
 ### fs.realpathSync(path)
@@ -162,7 +162,7 @@ Synchronous realpath(2). Returns the resolved path.
 
 ### fs.unlink(path, [callback])
 
-Asynchronous unlink(2). No arguments other than a possible exception are given 
+Asynchronous unlink(2). No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.unlinkSync(path)
@@ -171,7 +171,7 @@ Synchronous unlink(2).
 
 ### fs.rmdir(path, [callback])
 
-Asynchronous rmdir(2). No arguments other than a possible exception are given 
+Asynchronous rmdir(2). No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.rmdirSync(path)
@@ -180,7 +180,7 @@ Synchronous rmdir(2).
 
 ### fs.mkdir(path, mode, [callback])
 
-Asynchronous mkdir(2). No arguments other than a possible exception are given 
+Asynchronous mkdir(2). No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.mkdirSync(path, mode)
@@ -200,7 +200,7 @@ Synchronous readdir(3). Returns an array of filenames excluding `'.'` and
 
 ### fs.close(fd, [callback])
 
-Asynchronous close(2).  No arguments other than a possible exception are given 
+Asynchronous close(2).  No arguments other than a possible exception are given
 to the completion callback.
 
 ### fs.closeSync(fd)
@@ -210,11 +210,11 @@ Synchronous close(2).
 ### fs.open(path, flags, mode=0666, [callback])
 
 Asynchronous file open. See open(2). Flags can be 'r', 'r+', 'w', 'w+', 'a',
-or 'a+'. The callback gets two arguments `(err, fd)`. 
+or 'a+'. The callback gets two arguments `(err, fd)`.
 
 ### fs.openSync(path, flags, mode=0666)
 
-Synchronous open(2). 
+Synchronous open(2).
 
 ### fs.write(fd, buffer, offset, length, position, [callback])
 
@@ -232,12 +232,12 @@ specifies how many _bytes_ were written.
 
 ### fs.writeSync(fd, buffer, offset, length, position)
 
-Synchronous version of buffer-based `fs.write()`. Returns the number of bytes 
+Synchronous version of buffer-based `fs.write()`. Returns the number of bytes
 written.
 
 ### fs.writeSync(fd, str, position, encoding='utf8')
 
-Synchronous version of string-based `fs.write()`. Returns the number of bytes 
+Synchronous version of string-based `fs.write()`. Returns the number of bytes
 written.
 
 ### fs.read(fd, buffer, offset, length, position, [callback])
@@ -257,12 +257,12 @@ The callback is given the two arguments, `(err, bytesRead)`.
 
 ### fs.readSync(fd, buffer, offset, length, position)
 
-Synchronous version of buffer-based `fs.read`. Returns the number of 
+Synchronous version of buffer-based `fs.read`. Returns the number of
 `bytesRead`.
 
 ### fs.readSync(fd, length, position, encoding)
 
-Synchronous version of string-based `fs.read`. Returns the number of 
+Synchronous version of string-based `fs.read`. Returns the number of
 `bytesRead`.
 
 ### fs.readFile(filename, [encoding], [callback])
@@ -320,7 +320,7 @@ stat object:
       console.log('the previous mtime was: ' + prev.mtime);
     });
 
-These stat objects are instances of `fs.Stat`. 
+These stat objects are instances of `fs.Stat`.
 
 ### fs.unwatchFile(filename)
 
diff --git a/doc/api/http.markdown b/doc/api/http.markdown
index 95a581f3376..c61c5447736 100644
--- a/doc/api/http.markdown
+++ b/doc/api/http.markdown
@@ -47,7 +47,7 @@ This is an `EventEmitter` with the following events:
 
 `function (errno) { }`
 
- Emitted when the server closes. 
+ Emitted when the server closes.
 
 ### Event: 'request'
 
@@ -284,9 +284,9 @@ first chunk of body.
 ### response.addTrailers(headers)
 
 This method adds HTTP trailing headers (a header but at the end of the
-message) to the response. 
+message) to the response.
 
-Trailers will **only** be emitted if chunked encoding is used for the 
+Trailers will **only** be emitted if chunked encoding is used for the
 response; if it is not (e.g., if the request was HTTP/1.0), they will
 be silently discarded.
 
@@ -345,7 +345,7 @@ There are a few special headers that should be noted.
 
 * Sending a 'Content-length' header will disable the default chunked encoding.
 
-* Sending an 'Expect' header will immediately send the request headers. 
+* Sending an 'Expect' header will immediately send the request headers.
   Usually, when sending 'Expect: 100-continue', you should both set a timeout
   and listen for the `continue` event. See RFC2616 Section 8.2.3 for more
   information.
diff --git a/doc/api/modules.markdown b/doc/api/modules.markdown
index 89efa6e4ff0..2e135d78be8 100644
--- a/doc/api/modules.markdown
+++ b/doc/api/modules.markdown
@@ -8,7 +8,7 @@ variable with the same name as the module.
 Example:
 
     var util = require('util');
-    
+
 It is possible to extend node with other modules.  See `'Modules'`
 
 ## Modules
@@ -53,7 +53,7 @@ That is, `circle.js` must be in the same directory as `foo.js` for
 
 Without the leading `'./'`, like `require('assert')` the module is searched
 for in the `require.paths` array. `require.paths` on my system looks like
-this: 
+this:
 
 `[ '/home/ryan/.node_modules' ]`
 
diff --git a/doc/api/net.markdown b/doc/api/net.markdown
index c37a2dcad23..62947d627a3 100644
--- a/doc/api/net.markdown
+++ b/doc/api/net.markdown
@@ -1,7 +1,7 @@
 ## net
 
 The `net` module provides you with an asynchronous network wrapper. It contains
-methods for creating both servers and clients (called streams). You can include 
+methods for creating both servers and clients (called streams). You can include
 this module with `require("net");`
 
 ### net.createServer(connectionListener)
diff --git a/doc/api/path.markdown b/doc/api/path.markdown
index 2e0c9e04352..cc3dc6da8fd 100644
--- a/doc/api/path.markdown
+++ b/doc/api/path.markdown
@@ -19,7 +19,7 @@ Normalize an array of path parts, taking care of `'..'` and `'.'` parts.
 
 Example:
 
-    path.normalizeArray(['', 
+    path.normalizeArray(['',
       'foo', 'bar', 'baz', 'asdf', 'quux', '..'])
     // returns
     [ '', 'foo', 'bar', 'baz', 'asdf' ]
@@ -65,7 +65,7 @@ of the path.  If there is no '.' in the last portion of the path or the only '.'
 the first character, then it returns an empty string.  Examples:
 
     path.extname('index.html')
-    // returns 
+    // returns
     '.html'
 
     path.extname('index')
diff --git a/doc/api/process.markdown b/doc/api/process.markdown
index 8094dcfa3ef..5fee9a16da1 100644
--- a/doc/api/process.markdown
+++ b/doc/api/process.markdown
@@ -158,7 +158,7 @@ An object containing the user environment. See environ(7).
 
 ### process.exit(code=0)
 
-Ends the process with the specified `code`.  If omitted, exit uses the 
+Ends the process with the specified `code`.  If omitted, exit uses the
 'success' code `0`.
 
 To exit with a 'failure' code:
@@ -194,7 +194,7 @@ blocks while resolving it to a numerical ID.
 
 ### process.getuid()
 
-Gets the user identity of the process. (See getuid(2).) 
+Gets the user identity of the process. (See getuid(2).)
 This is the numerical userid, not the username.
 
     console.log('Current uid: ' + process.getuid());
diff --git a/doc/api/repl.markdown b/doc/api/repl.markdown
index 0bc5c165840..8ae3623a48c 100644
--- a/doc/api/repl.markdown
+++ b/doc/api/repl.markdown
@@ -10,9 +10,9 @@ dropped into the REPL. It has simplistic emacs line-editing.
 
     mjr:~$ node
     Type '.help' for options.
-    node> a = [ 1, 2, 3];
+    > a = [ 1, 2, 3];
     [ 1, 2, 3 ]
-    node> a.forEach(function (v) {
+    > a.forEach(function (v) {
     ...   console.log(v);
     ...   });
     1
@@ -27,10 +27,10 @@ For example, you could add this to your bashrc file:
     alias node="env NODE_NO_READLINE=1 rlwrap node"
 
 
-### repl.start(prompt='node> ', stream=process.openStdin())
+### repl.start(prompt='> ', stream=process.openStdin())
 
 Starts a REPL with `prompt` as the prompt and `stream` for all I/O.  `prompt`
-is optional and defaults to `node> `.  `stream` is optional and defaults to 
+is optional and defaults to `> `.  `stream` is optional and defaults to
 `process.openStdin()`.
 
 Multiple REPLs may be started against the same running instance of node.  Each
@@ -60,7 +60,7 @@ REPL clients may connect through the Unix socket or TCP socket. `telnet` is usef
 for connecting to TCP sockets, and `socat` can be used to connect to both Unix and
 TCP sockets.
 
-By starting a REPL from a Unix socket-based server instead of stdin, you can 
+By starting a REPL from a Unix socket-based server instead of stdin, you can
 connect to a long-running node process without restarting it.
 
 
@@ -70,14 +70,14 @@ Inside the REPL, Control+D will exit.  Multi-line expressions can be input.
 
 The special variable `_` (underscore) contains the result of the last expression.
 
-    node> [ "a", "b", "c" ]
+    > [ "a", "b", "c" ]
     [ 'a', 'b', 'c' ]
-    node> _.length 
+    > _.length
     3
-    node> _ += 1
+    > _ += 1
     4
 
-The REPL provides access to any variables in the global scope. You can expose a variable 
+The REPL provides access to any variables in the global scope. You can expose a variable
 to the REPL explicitly by assigning it to the `context` object associated with each
 `REPLServer`.  For example:
 
@@ -89,8 +89,8 @@ to the REPL explicitly by assigning it to the `context` object associated with e
 
 Things in the `context` object appear as local within the REPL:
 
-    mjr:~$ node repl_test.js 
-    node> m
+    mjr:~$ node repl_test.js
+    > m
     'message'
 
 There are a few special REPL commands:
diff --git a/doc/api/url.markdown b/doc/api/url.markdown
index d1e6123a3ac..5f9b31f451a 100644
--- a/doc/api/url.markdown
+++ b/doc/api/url.markdown
@@ -9,17 +9,17 @@ string will not be in the parsed object. Examples are shown for the URL
 
 `'http://user:pass@host.com:8080/p/a/t/h?query=string#hash'`
 
-* `href`: The full URL that was originally parsed. 
-  
+* `href`: The full URL that was originally parsed.
+
   Example: `'http://user:pass@host.com:8080/p/a/t/h?query=string#hash'`
 * `protocol`: The request protocol.
-  
+
   Example: `'http:'`
-* `host`: The full host portion of the URL, including port and authentication information. 
-  
+* `host`: The full host portion of the URL, including port and authentication information.
+
   Example: `'user:pass@host.com:8080'`
 * `auth`: The authentication information portion of a URL.
-  
+
   Example: `'user:pass'`
 * `hostname`: Just the hostname portion of the host.