diff options
author | bubnikv <bubnikv@gmail.com> | 2018-06-11 19:20:29 +0300 |
---|---|---|
committer | bubnikv <bubnikv@gmail.com> | 2018-06-11 19:20:29 +0300 |
commit | 69705b5e66d929ae38ca97c1475b105bc2aeb386 (patch) | |
tree | e2d7e77ed34b463cd3ce66ef96b124ebb1149b07 | |
parent | a54e587751ade9b831c9de0ec198793d7bad9535 (diff) |
Split the MK2.5 profile from the MK2S
-rw-r--r-- | resources/profiles/PrusaResearch.idx | 1 | ||||
-rw-r--r-- | resources/profiles/PrusaResearch.ini | 63 |
2 files changed, 62 insertions, 2 deletions
diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx index 5c68e3c7c..767c372e8 100644 --- a/resources/profiles/PrusaResearch.idx +++ b/resources/profiles/PrusaResearch.idx @@ -1,3 +1,4 @@ +0.1.6 Split the MK2.5 profile from the MK2S 0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles 0.1.4 edited fw version, added z-raise after print 0.1.3 Fixed an incorrect position of the max_print_height parameter diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index 5f1d654a3..fdeefb8c9 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the Slic3r configuration to be downgraded. -config_version = 0.1.5 +config_version = 0.1.6 # Where to get the updates from? config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/ @@ -19,7 +19,11 @@ name = Original Prusa i3 MK3 variants = 0.4; 0.25; 0.6 [printer_model:MK2S] -name = Original Prusa i3 MK2S, MK2.5 +name = Original Prusa i3 MK2S +variants = 0.4; 0.25; 0.6 + +[printer_model:MK2.5] +name = Original Prusa i3 MK2.5 variants = 0.4; 0.25; 0.6 [printer_model:MK2SMM] @@ -166,6 +170,10 @@ support_material_threshold = 80 support_material_with_sheath = 1 wipe_tower = 1 +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.05mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + [print:*0.05mm*] inherits = *common* bottom_solid_layers = 10 @@ -226,6 +234,10 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and fill_pattern = grid top_infill_extrusion_width = 0.4 +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.10mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + [print:*0.10mm*] inherits = *common* bottom_solid_layers = 7 @@ -299,6 +311,10 @@ solid_infill_speed = 200 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.15mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + [print:*0.15mm*] inherits = *common* bottom_solid_layers = 5 @@ -420,6 +436,10 @@ perimeter_speed = 45 solid_infill_speed = 200 top_solid_infill_speed = 50 +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.20mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + [print:0.20mm 100mms Linear Advance] inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 @@ -483,6 +503,10 @@ perimeter_speed = 45 solid_infill_speed = 200 top_solid_infill_speed = 50 +# XXXXXXXXXXXXXXXXXXXX +# XXX--- 0.35mm ---XXX +# XXXXXXXXXXXXXXXXXXXX + [print:*0.35mm*] inherits = *common* bottom_solid_layers = 3 @@ -532,6 +556,10 @@ support_material_interface_layers = 2 support_material_with_sheath = 0 support_material_xy_spacing = 150% +# XXXXXXxxXXXXXXXXXXXXXX +# XXX--- filament ---XXX +# XXXXXXXXxxXXXXXXXXXXXX + [filament:*common*] cooling = 1 compatible_printers = @@ -958,6 +986,10 @@ variable_layer_height = 0 default_print_profile = 0.15mm OPTIMAL default_filament_profile = Prusa PLA +# XXXXXXXXXXXXXXXXX +# XXX--- MK2 ---XXX +# XXXXXXXXXXXXXXXXX + [printer:Original Prusa i3 MK2] inherits = *common* @@ -980,6 +1012,10 @@ nozzle_diameter = 0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL 0.6 nozzle +# XXXXXXXXXXXXXXXXXXX +# XXX--- MK2MM ---XXX +# XXXXXXXXXXXXXXXXXXX + [printer:Original Prusa i3 MK2 MM Single Mode] inherits = *mm-single* @@ -999,6 +1035,29 @@ nozzle_diameter = 0.6,0.6,0.6,0.6 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL 0.6 nozzle +# XXXXXXXXXXXXXXXXXXX +# XXX--- MK2.5 ---XXX +# XXXXXXXXXXXXXXXXXXX + +[printer:Original Prusa i3 MK2.5] +inherits = Original Prusa i3 MK2 +printer_model = MK2.5 +start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5 0.25 nozzle] +inherits = Original Prusa i3 MK2 0.25 nozzle +printer_model = MK2.5 +start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +[printer:Original Prusa i3 MK2.5 0.6 nozzle] +inherits = Original Prusa i3 MK2 0.6 nozzle +printer_model = MK2.5 +start_gcode = M115 U3.2.1 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 + +# XXXXXXXXXXXXXXXXX +# XXX--- MK3 ---XXX +# XXXXXXXXXXXXXXXXX + [printer:Original Prusa i3 MK3] inherits = *common* end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors |