Updated slic3r version and Prusa3D bundled printer presets.version_1.39.2-beta

5 files changed, 3121 insertions, 421 deletions

diff --git a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
index a186c3775..4b8fc6302 100644
--- a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
+++ b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
@@ -1,6 +1,6 @@
-# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:10:57
+# generated by Slic3r Prusa Edition 1.39.0 on 2018-04-27 at 18:00:54
 
-[print:0.05mm DETAIL]
+[print:0.05mm ULTRADETAIL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -79,10 +79,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -106,7 +106,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL 0.25 nozzle]
+[print:0.05mm ULTRADETAIL 0.25 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -163,7 +163,7 @@ perimeter_acceleration = 300
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -185,10 +185,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -204,7 +204,113 @@ threads = 4
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 200
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 15
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -212,7 +318,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL MK3]
+[print:0.05mm ULTRADETAIL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -222,7 +328,7 @@ bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 500
 dont_support_bridges = 1
@@ -278,7 +384,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 15
+small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -291,10 +397,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -310,7 +416,7 @@ threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 180
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -397,10 +503,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -481,7 +587,7 @@ perimeter_acceleration = 600
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.25
 perimeter_speed = 25
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -503,10 +609,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -530,9 +636,221 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.10mm DETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.10mm DETAIL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.62
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.62
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.62
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.10mm DETAIL MK3]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -540,7 +858,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -563,17 +881,17 @@ first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 1500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 170
 interface_shells = 0
 layer_height = 0.1
-max_print_speed = 250
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -596,12 +914,12 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_speed = 170
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -627,8 +945,8 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
+top_solid_layers = 9
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -638,7 +956,7 @@ xy_size_compensation = 0
 
 [print:0.15mm 100mms Linear Advance]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -733,7 +1051,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 70
-top_solid_layers = 5
+top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -799,7 +1117,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -821,10 +1139,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -927,10 +1245,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.2
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -938,7 +1256,7 @@ support_material_pattern = rectilinear
 support_material_spacing = 1
 support_material_speed = 50
 support_material_synchronize_layers = 0
-support_material_threshold = 35
+support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 150%
 thin_walls = 0
@@ -954,6 +1272,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
@@ -1011,7 +1435,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1036,7 +1460,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1060,9 +1484,115 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL MK3]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -1070,7 +1600,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1093,17 +1623,17 @@ first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 1500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 170
 interface_shells = 0
 layer_height = 0.15
-max_print_speed = 250
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1126,12 +1656,12 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_speed = 170
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1157,8 +1687,8 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
+top_solid_layers = 7
+travel_speed = 170
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1223,7 +1753,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1266,7 +1796,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1329,7 +1859,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1364,7 +1894,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.45
@@ -1372,7 +1902,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1494,7 +2024,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1517,17 +2047,17 @@ first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 1500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 170
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 250
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1550,12 +2080,12 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_speed = 170
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1582,7 +2112,7 @@ threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
 top_solid_layers = 5
-travel_speed = 250
+travel_speed = 170
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1753,7 +2283,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1778,7 +2308,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1802,6 +2332,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.20mm NORMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.20mm NORMAL SOLUBLE FULL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
@@ -1894,7 +2530,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 1
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -1902,7 +2538,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2000,7 +2636,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -2008,7 +2644,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2093,10 +2729,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2122,7 +2758,7 @@ xy_size_compensation = 0
 
 [print:0.35mm FAST 0.6 nozzle]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
+bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -2177,7 +2813,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -2202,7 +2838,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2217,7 +2853,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_layers = 9
+top_solid_layers = 4
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -2462,7 +3098,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
@@ -2482,7 +3118,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2491,7 +3127,7 @@ first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2549,7 +3185,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
@@ -2569,7 +3205,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2578,7 +3214,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2607,7 +3243,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 260
@@ -2627,7 +3263,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2636,7 +3272,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2665,7 +3301,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 260
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 260
@@ -2685,7 +3321,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2694,7 +3330,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2714,7 +3350,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2723,7 +3359,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -2743,7 +3379,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2752,7 +3388,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
@@ -2772,7 +3408,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2781,7 +3417,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 265
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 265
@@ -2801,19 +3437,19 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "CPE HG100 , CPE HM100"
 filament_settings_id = 
 filament_soluble = 0
 filament_type = PET
 first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 80
-min_fan_speed = 80
-min_print_speed = 5
+first_layer_temperature = 275
+max_fan_speed = 50
+min_fan_speed = 50
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 260
+temperature = 275
 
 [filament:Fillamentum Timberfil]
 bed_temperature = 60
@@ -2859,7 +3495,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2868,7 +3504,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -2888,7 +3524,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2897,7 +3533,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2946,7 +3582,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2955,7 +3591,7 @@ first_layer_bed_temperature = 120
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -3004,7 +3640,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -3013,7 +3649,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -3033,7 +3669,7 @@ filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 1
@@ -3042,7 +3678,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 20
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
@@ -3062,7 +3698,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -3071,7 +3707,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -3120,19 +3756,19 @@ filament_colour = #00CA0A
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 2.5
+filament_max_volumetric_speed = 1.5
 filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
 filament_settings_id = 
 filament_soluble = 0
 filament_type = FLEX
 first_layer_bed_temperature = 50
-first_layer_temperature = 220
+first_layer_temperature = 240
 max_fan_speed = 90
 min_fan_speed = 70
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 230
+temperature = 240
 
 [filament:Taulman Bridge]
 bed_temperature = 50
@@ -3149,7 +3785,7 @@ filament_colour = #DEE0E6
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3158,7 +3794,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
@@ -3178,7 +3814,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3187,7 +3823,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
index 64af7d9b2..b04459847 100644
--- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
+++ b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
@@ -1,6 +1,6 @@
-# generated by Slic3r Prusa Edition 1.39.0.29-prusa3d-win64 on 2018-01-22 at 14:53:14
+# generated by Slic3r Prusa Edition 1.39.2-alpha+2-win64 on 2018-04-27 at 14:10:16
 
-[print:0.05mm DETAIL]
+[print:0.05mm ULTRADETAIL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -79,10 +79,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -106,7 +106,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL 0.25 nozzle]
+[print:0.05mm ULTRADETAIL 0.25 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -163,7 +163,7 @@ perimeter_acceleration = 300
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -185,10 +185,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -204,7 +204,113 @@ threads = 4
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 200
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 15
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -212,7 +318,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL MK3]
+[print:0.05mm ULTRADETAIL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -222,7 +328,7 @@ bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 500
 dont_support_bridges = 1
@@ -278,7 +384,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 15
+small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -291,10 +397,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -310,7 +416,7 @@ threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 180
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -397,10 +503,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -481,7 +587,7 @@ perimeter_acceleration = 600
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.25
 perimeter_speed = 25
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -503,10 +609,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -530,6 +636,218 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.10mm DETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.10mm DETAIL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.62
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.62
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.62
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.10mm DETAIL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 7
@@ -540,7 +858,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -573,7 +891,7 @@ infill_overlap = 25%
 infill_speed = 170
 interface_shells = 0
 layer_height = 0.1
-max_print_speed = 170
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -596,7 +914,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -638,7 +956,7 @@ xy_size_compensation = 0
 
 [print:0.15mm 100mms Linear Advance]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -733,7 +1051,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 70
-top_solid_layers = 5
+top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -799,7 +1117,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -821,10 +1139,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -927,10 +1245,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.2
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -938,7 +1256,7 @@ support_material_pattern = rectilinear
 support_material_spacing = 1
 support_material_speed = 50
 support_material_synchronize_layers = 0
-support_material_threshold = 35
+support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 150%
 thin_walls = 0
@@ -954,6 +1272,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
@@ -1011,7 +1435,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1036,7 +1460,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1060,6 +1484,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
@@ -1070,7 +1600,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1103,7 +1633,7 @@ infill_overlap = 25%
 infill_speed = 170
 interface_shells = 0
 layer_height = 0.15
-max_print_speed = 170
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1126,7 +1656,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -1223,7 +1753,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1266,7 +1796,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1329,7 +1859,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1364,7 +1894,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.45
@@ -1372,7 +1902,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1494,7 +2024,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1527,7 +2057,7 @@ infill_overlap = 25%
 infill_speed = 170
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 170
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1550,7 +2080,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -1753,7 +2283,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1778,7 +2308,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1802,6 +2332,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.20mm NORMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.20mm NORMAL SOLUBLE FULL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
@@ -1894,7 +2530,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 1
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -1902,7 +2538,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2000,7 +2636,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -2008,7 +2644,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2093,10 +2729,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2122,7 +2758,7 @@ xy_size_compensation = 0
 
 [print:0.35mm FAST 0.6 nozzle]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
+bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -2177,7 +2813,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -2202,7 +2838,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2217,7 +2853,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_layers = 9
+top_solid_layers = 4
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -2462,7 +3098,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
@@ -2482,7 +3118,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2491,7 +3127,7 @@ first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2549,7 +3185,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
@@ -2569,7 +3205,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2578,7 +3214,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2607,7 +3243,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 260
@@ -2627,7 +3263,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2636,7 +3272,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2665,7 +3301,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 260
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 260
@@ -2685,7 +3321,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2694,7 +3330,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2714,7 +3350,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2723,7 +3359,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -2743,7 +3379,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2752,7 +3388,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
@@ -2772,7 +3408,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2781,7 +3417,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 265
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 265
@@ -2801,7 +3437,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "CPE HG100 , CPE HM100"
 filament_settings_id = 
 filament_soluble = 0
@@ -2810,7 +3446,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 275
 max_fan_speed = 50
 min_fan_speed = 50
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 275
@@ -2859,7 +3495,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2868,7 +3504,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -2888,7 +3524,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2897,7 +3533,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2946,7 +3582,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2955,7 +3591,7 @@ first_layer_bed_temperature = 120
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -3004,7 +3640,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -3013,7 +3649,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -3033,7 +3669,7 @@ filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 1
@@ -3042,7 +3678,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 20
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
@@ -3062,7 +3698,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -3071,7 +3707,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -3129,7 +3765,7 @@ first_layer_bed_temperature = 50
 first_layer_temperature = 240
 max_fan_speed = 90
 min_fan_speed = 70
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 240
@@ -3149,7 +3785,7 @@ filament_colour = #DEE0E6
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3158,7 +3794,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
@@ -3178,7 +3814,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3187,7 +3823,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
@@ -3560,7 +4196,7 @@ retract_speed = 35
 serial_port = 
 serial_speed = 250000
 single_extruder_multi_material = 0
-start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+start_gcode = M115 U3.1.3-RC1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -3569,6 +4205,84 @@ variable_layer_height = 1
 wipe = 1
 z_offset = 0
 
+[printer:Original Prusa i3 MK3 0.25 nozzle]
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.25
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.3-RC1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}100{endif}
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+
+[printer:Original Prusa i3 MK3 0.6 nozzle]
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM221 S100\nM220 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.3-RC1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\nM220 S115
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
 [presets]
 print = 0.15mm OPTIMAL MK3
 printer = Original Prusa i3 MK3
diff --git a/resources/profiles/Original Prusa i3 MK2MM.ini b/resources/profiles/Original Prusa i3 MK2MM.ini
index 035d15515..4c32fad00 100644
--- a/resources/profiles/Original Prusa i3 MK2MM.ini
+++ b/resources/profiles/Original Prusa i3 MK2MM.ini
@@ -1,6 +1,6 @@
-# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:12:06
+# generated by Slic3r Prusa Edition 1.39.0 on 2018-04-27 at 18:01:43
 
-[print:0.05mm DETAIL]
+[print:0.05mm ULTRADETAIL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -79,10 +79,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -106,7 +106,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL 0.25 nozzle]
+[print:0.05mm ULTRADETAIL 0.25 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -163,7 +163,7 @@ perimeter_acceleration = 300
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -185,10 +185,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -204,7 +204,113 @@ threads = 4
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 200
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 15
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -212,7 +318,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL MK3]
+[print:0.05mm ULTRADETAIL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -222,7 +328,7 @@ bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 500
 dont_support_bridges = 1
@@ -278,7 +384,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 15
+small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -291,10 +397,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -310,7 +416,7 @@ threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 180
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -397,10 +503,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -481,7 +587,7 @@ perimeter_acceleration = 600
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.25
 perimeter_speed = 25
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -503,10 +609,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -530,9 +636,221 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.10mm DETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.10mm DETAIL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.62
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.62
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.62
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.10mm DETAIL MK3]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -540,7 +858,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -563,17 +881,17 @@ first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 1500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 170
 interface_shells = 0
 layer_height = 0.1
-max_print_speed = 250
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -596,12 +914,12 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_speed = 170
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -627,8 +945,8 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
+top_solid_layers = 9
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -638,7 +956,7 @@ xy_size_compensation = 0
 
 [print:0.15mm 100mms Linear Advance]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -733,7 +1051,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 70
-top_solid_layers = 5
+top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -799,7 +1117,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -821,10 +1139,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -927,10 +1245,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.2
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -938,7 +1256,7 @@ support_material_pattern = rectilinear
 support_material_spacing = 1
 support_material_speed = 50
 support_material_synchronize_layers = 0
-support_material_threshold = 35
+support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 150%
 thin_walls = 0
@@ -954,6 +1272,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
@@ -1011,7 +1435,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1036,7 +1460,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1060,9 +1484,115 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL MK3]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -1070,7 +1600,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1093,17 +1623,17 @@ first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 1500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 170
 interface_shells = 0
 layer_height = 0.15
-max_print_speed = 250
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1126,12 +1656,12 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_speed = 170
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1157,8 +1687,8 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
+top_solid_layers = 7
+travel_speed = 170
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1223,7 +1753,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1266,7 +1796,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1329,7 +1859,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1364,7 +1894,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.45
@@ -1372,7 +1902,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1494,7 +2024,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1517,17 +2047,17 @@ first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 1500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 170
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 250
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1550,12 +2080,12 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_speed = 170
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1582,7 +2112,7 @@ threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
 top_solid_layers = 5
-travel_speed = 250
+travel_speed = 170
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1753,7 +2283,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1778,7 +2308,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1802,6 +2332,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.20mm NORMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.20mm NORMAL SOLUBLE FULL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
@@ -1894,7 +2530,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 1
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -1902,7 +2538,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2000,7 +2636,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -2008,7 +2644,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2093,10 +2729,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2122,7 +2758,7 @@ xy_size_compensation = 0
 
 [print:0.35mm FAST 0.6 nozzle]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
+bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -2177,7 +2813,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -2202,7 +2838,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2217,7 +2853,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_layers = 9
+top_solid_layers = 4
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -2462,7 +3098,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
@@ -2482,7 +3118,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2491,7 +3127,7 @@ first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2549,7 +3185,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
@@ -2569,7 +3205,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2578,7 +3214,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2607,7 +3243,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 260
@@ -2627,7 +3263,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2636,7 +3272,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2665,7 +3301,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 260
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 260
@@ -2685,7 +3321,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2694,7 +3330,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2714,7 +3350,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2723,7 +3359,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -2743,7 +3379,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2752,7 +3388,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
@@ -2772,7 +3408,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2781,7 +3417,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 265
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 265
@@ -2801,19 +3437,19 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "CPE HG100 , CPE HM100"
 filament_settings_id = 
 filament_soluble = 0
 filament_type = PET
 first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 80
-min_fan_speed = 80
-min_print_speed = 5
+first_layer_temperature = 275
+max_fan_speed = 50
+min_fan_speed = 50
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 260
+temperature = 275
 
 [filament:Fillamentum Timberfil]
 bed_temperature = 60
@@ -2859,7 +3495,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2868,7 +3504,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -2888,7 +3524,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2897,7 +3533,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2946,7 +3582,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2955,7 +3591,7 @@ first_layer_bed_temperature = 120
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -3004,7 +3640,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -3013,7 +3649,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -3033,7 +3669,7 @@ filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 1
@@ -3042,7 +3678,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 20
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
@@ -3062,7 +3698,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -3071,7 +3707,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -3120,19 +3756,19 @@ filament_colour = #00CA0A
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 2.5
+filament_max_volumetric_speed = 1.5
 filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
 filament_settings_id = 
 filament_soluble = 0
 filament_type = FLEX
 first_layer_bed_temperature = 50
-first_layer_temperature = 220
+first_layer_temperature = 240
 max_fan_speed = 90
 min_fan_speed = 70
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 230
+temperature = 240
 
 [filament:Taulman Bridge]
 bed_temperature = 50
@@ -3149,7 +3785,7 @@ filament_colour = #DEE0E6
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3158,7 +3794,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
@@ -3178,7 +3814,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3187,7 +3823,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
diff --git a/resources/profiles/Original Prusa i3 MK3.ini b/resources/profiles/Original Prusa i3 MK3.ini
index b53006b0f..60df920f6 100644
--- a/resources/profiles/Original Prusa i3 MK3.ini
+++ b/resources/profiles/Original Prusa i3 MK3.ini
@@ -1,6 +1,6 @@
-# generated by Slic3r Prusa Edition 1.39.0 on 2018-02-02 at 10:48:46
+# generated by Slic3r Prusa Edition 1.39.0 on 2018-04-27 at 17:59:37
 
-[print:0.05mm DETAIL]
+[print:0.05mm ULTRADETAIL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -79,10 +79,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -106,7 +106,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL 0.25 nozzle]
+[print:0.05mm ULTRADETAIL 0.25 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -163,7 +163,7 @@ perimeter_acceleration = 300
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -185,10 +185,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -204,7 +204,113 @@ threads = 4
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 200
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 15
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -212,7 +318,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.05mm DETAIL MK3]
+[print:0.05mm ULTRADETAIL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 10
 bridge_acceleration = 300
@@ -222,7 +328,7 @@ bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 500
 dont_support_bridges = 1
@@ -278,7 +384,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 15
+small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -291,10 +397,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.3
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -310,7 +416,7 @@ threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 15
-travel_speed = 180
+travel_speed = 170
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -397,10 +503,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -481,7 +587,7 @@ perimeter_acceleration = 600
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.25
 perimeter_speed = 25
-perimeters = 4
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -503,10 +609,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.18
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -530,6 +636,218 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.10mm DETAIL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:0.10mm DETAIL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.62
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.62
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.62
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.10mm DETAIL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 7
@@ -540,7 +858,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -573,7 +891,7 @@ infill_overlap = 25%
 infill_speed = 170
 interface_shells = 0
 layer_height = 0.1
-max_print_speed = 170
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -596,7 +914,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -638,7 +956,7 @@ xy_size_compensation = 0
 
 [print:0.15mm 100mms Linear Advance]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -733,7 +1051,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 70
-top_solid_layers = 5
+top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -799,7 +1117,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -821,10 +1139,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -927,10 +1245,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.2
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 0
 support_material_interface_spacing = 0.15
 support_material_interface_speed = 100%
@@ -938,7 +1256,7 @@ support_material_pattern = rectilinear
 support_material_spacing = 1
 support_material_speed = 50
 support_material_synchronize_layers = 0
-support_material_threshold = 35
+support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 150%
 thin_walls = 0
@@ -954,6 +1272,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.25 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
@@ -1011,7 +1435,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1036,7 +1460,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1060,6 +1484,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.15mm OPTIMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.15mm OPTIMAL MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
@@ -1070,7 +1600,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1103,7 +1633,7 @@ infill_overlap = 25%
 infill_speed = 170
 interface_shells = 0
 layer_height = 0.15
-max_print_speed = 170
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1126,7 +1656,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -1223,7 +1753,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1266,7 +1796,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1329,7 +1859,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 40
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1364,7 +1894,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.45
@@ -1372,7 +1902,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 7
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -1494,7 +2024,7 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1527,7 +2057,7 @@ infill_overlap = 25%
 infill_speed = 170
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 170
+max_print_speed = 200
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1550,7 +2080,7 @@ seam_position = nearest
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -1753,7 +2283,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1778,7 +2308,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1802,6 +2332,112 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
+[print:0.20mm NORMAL 0.6 nozzle MK3]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 170
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 170
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.62
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 170
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
 [print:0.20mm NORMAL SOLUBLE FULL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
@@ -1894,7 +2530,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 1
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -1902,7 +2538,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2000,7 +2636,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
@@ -2008,7 +2644,7 @@ top_solid_infill_speed = 30
 top_solid_layers = 5
 travel_speed = 120
 wipe_tower = 1
-wipe_tower_per_color_wipe = 20
+wipe_tower_per_color_wipe = 25
 wipe_tower_width = 60
 wipe_tower_x = 180
 wipe_tower_y = 140
@@ -2093,10 +2729,10 @@ support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2122,7 +2758,7 @@ xy_size_compensation = 0
 
 [print:0.35mm FAST 0.6 nozzle]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
+bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -2177,7 +2813,7 @@ perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -2202,7 +2838,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -2217,7 +2853,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_layers = 9
+top_solid_layers = 4
 travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -2462,7 +3098,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
@@ -2482,7 +3118,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2491,7 +3127,7 @@ first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2549,7 +3185,7 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
@@ -2569,7 +3205,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2578,7 +3214,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
@@ -2607,7 +3243,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 260
@@ -2627,7 +3263,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2636,7 +3272,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2665,7 +3301,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 260
 max_fan_speed = 35
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 260
@@ -2685,7 +3321,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2694,7 +3330,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2714,7 +3350,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2723,7 +3359,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -2743,7 +3379,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2752,7 +3388,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
@@ -2772,7 +3408,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -2781,7 +3417,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 265
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 265
@@ -2801,7 +3437,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "CPE HG100 , CPE HM100"
 filament_settings_id = 
 filament_soluble = 0
@@ -2810,7 +3446,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 275
 max_fan_speed = 50
 min_fan_speed = 50
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 275
@@ -2859,7 +3495,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2868,7 +3504,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -2888,7 +3524,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -2897,7 +3533,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -2946,7 +3582,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -2955,7 +3591,7 @@ first_layer_bed_temperature = 120
 first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
@@ -3004,7 +3640,7 @@ filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_settings_id = 
 filament_soluble = 0
@@ -3013,7 +3649,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
@@ -3033,7 +3669,7 @@ filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 1
@@ -3042,7 +3678,7 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 20
 min_fan_speed = 20
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
@@ -3062,7 +3698,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_settings_id = 
 filament_soluble = 0
@@ -3071,7 +3707,7 @@ first_layer_bed_temperature = 85
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
@@ -3129,7 +3765,7 @@ first_layer_bed_temperature = 50
 first_layer_temperature = 240
 max_fan_speed = 90
 min_fan_speed = 70
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 240
@@ -3149,7 +3785,7 @@ filament_colour = #DEE0E6
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3158,7 +3794,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
@@ -3178,7 +3814,7 @@ filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
@@ -3187,7 +3823,7 @@ first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
@@ -3280,7 +3916,7 @@ retract_speed = 35
 serial_port = 
 serial_speed = 250000
 single_extruder_multi_material = 0
-start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+start_gcode = M115 U3.1.3-RC1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -3289,6 +3925,84 @@ variable_layer_height = 1
 wipe = 1
 z_offset = 0
 
+[printer:Original Prusa i3 MK3 0.25 nozzle]
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.25
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.3-RC1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}100{endif}
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+
+[printer:Original Prusa i3 MK3 0.6 nozzle]
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM221 S100\nM220 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.3-RC1 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\nM220 S115
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
 [presets]
 print = 0.15mm OPTIMAL MK3
 printer = Original Prusa i3 MK3
diff --git a/xs/src/libslic3r/libslic3r.h b/xs/src/libslic3r/libslic3r.h
index e58b01582..359078748 100644
--- a/xs/src/libslic3r/libslic3r.h
+++ b/xs/src/libslic3r/libslic3r.h
@@ -14,7 +14,7 @@
 #include <boost/thread.hpp>
 
 #define SLIC3R_FORK_NAME "Slic3r Prusa Edition"
-#define SLIC3R_VERSION "1.39.0"
+#define SLIC3R_VERSION "1.39.2-beta"
 #define SLIC3R_BUILD "UNKNOWN"
 
 typedef int32_t coord_t;