Updated profiles

2 files changed, 153 insertions, 64 deletions

diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx
index 49d8ac1a5..a8d169c68 100644
--- a/resources/profiles/PrusaResearch.idx
+++ b/resources/profiles/PrusaResearch.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 1.42.0-alpha
+0.4.0-alpha4 Updated SLA profiles
 0.4.0-alpha3 Update of SLA profiles
 0.4.0-alpha2 First SLA profiles
 min_slic3r_version = 1.41.1
diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
index 57c401419..306867044 100644
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the Slic3r configuration to be downgraded.
-config_version = 0.4.0-alpha3
+config_version = 0.4.0-alpha4
 # Where to get the updates from?
 config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
 
@@ -155,6 +155,7 @@ xy_size_compensation = 0
 [print:*MK3*]
 fill_pattern = grid
 single_extruder_multi_material_priming = 0
+travel_speed = 180
 wipe_tower_x = 170
 wipe_tower_y = 125
 
@@ -441,7 +442,7 @@ inherits = *common*
 bottom_solid_layers = 4
 bridge_flow_ratio = 0.95
 external_perimeter_speed = 40
-infill_acceleration = 1250
+infill_acceleration = 2000
 infill_speed = 60
 layer_height = 0.2
 perimeter_acceleration = 800
@@ -613,10 +614,14 @@ single_extruder_multi_material_priming = 0
 
 [print:0.15mm OPTIMAL SOLUBLE FULL MK2.5]
 inherits = 0.15mm OPTIMAL SOLUBLE FULL
+support_material_extruder = 5
+support_material_interface_extruder = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 
 [print:0.15mm OPTIMAL SOLUBLE INTERFACE MK2.5]
 inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE
+support_material_extruder = 0
+support_material_interface_extruder = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 
 [print:0.20mm 100mms Linear Advance MK2.5]
@@ -631,11 +636,15 @@ single_extruder_multi_material_priming = 0
 
 [print:0.20mm NORMAL SOLUBLE FULL MK2.5]
 inherits = 0.20mm NORMAL SOLUBLE FULL
+support_material_extruder = 5
+support_material_interface_extruder = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 single_extruder_multi_material_priming = 0
 
 [print:0.20mm NORMAL SOLUBLE INTERFACE MK2.5]
 inherits = 0.20mm NORMAL SOLUBLE INTERFACE
+support_material_extruder = 0
+support_material_interface_extruder = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 single_extruder_multi_material_priming = 0
 
@@ -805,6 +814,7 @@ temperature = 270
 
 [filament:ColorFabb XT-CF20]
 inherits = *PET*
+compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 extrusion_multiplier = 1.2
 filament_cost = 80.65
 filament_density = 1.35
@@ -848,7 +858,7 @@ temperature = 260
 inherits = *PET*
 filament_cost = 56.9
 filament_density = 1.26
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_notes = "List of manufacturers tested with standart PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
 
 [filament:E3D PC-ABS]
 inherits = *ABS*
@@ -900,19 +910,19 @@ temperature = 190
 inherits = *ABS*
 filament_cost = 27.82
 filament_density = 1.04
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_notes = "List of materials tested with standart ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
 
 [filament:Generic PET]
 inherits = *PET*
 filament_cost = 27.82
-filament_density = 1.24
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_density = 1.27
+filament_notes = "List of manufacturers tested with standart PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
 
 [filament:Generic PLA]
 inherits = *PLA*
 filament_cost = 25.4
-filament_density = 1.27
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_density = 1.24
+filament_notes = "List of materials tested with standart PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 
 [filament:Polymaker PC-Max]
 inherits = *ABS*
@@ -932,7 +942,7 @@ cooling = 0
 fan_always_on = 0
 filament_colour = #FFFFD7
 filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
+filament_notes = "List of materials tested with standart PVA print settings:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
 filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_soluble = 1
 filament_type = PVA
@@ -944,7 +954,7 @@ temperature = 195
 inherits = *ABS*
 filament_cost = 27.82
 filament_density = 1.08
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_notes = "List of materials tested with standart ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
 
 [filament:*ABS MMU2*]
 inherits = Prusa ABS
@@ -982,7 +992,14 @@ temperature = 220
 inherits = *PET*
 filament_cost = 27.82
 filament_density = 1.27
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_notes = "List of manufacturers tested with standart PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
+
+[filament:Prusament PETG]
+inherits = *PET*
+first_layer_temperature = 240
+temperature = 250
+filament_cost = 24.99
+filament_density = 1.27
 
 [filament:*PET MMU2*]
 inherits = Prusa PET
@@ -1006,11 +1023,14 @@ inherits = *PET MMU2*
 [filament:Prusa PET MMU2]
 inherits = *PET MMU2*
 
+[filament:Prusament PET MMU2]
+inherits = *PET MMU2*
+
 [filament:Prusa PLA]
 inherits = *PLA*
 filament_cost = 25.4
 filament_density = 1.24
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_notes = "List of materials tested with standart PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 
 [filament:Prusament PLA]
 inherits = *PLA*
@@ -1093,7 +1113,7 @@ fan_always_on = 0
 fan_below_layer_time = 100
 filament_colour = #FFFFD7
 filament_max_volumetric_speed = 4
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_notes = "List of materials tested with standart PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 filament_soluble = 1
 filament_type = PLA
 first_layer_bed_temperature = 60
@@ -1135,7 +1155,7 @@ fan_always_on = 1
 fan_below_layer_time = 100
 filament_colour = #DEE0E6
 filament_max_volumetric_speed = 5
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
+filament_notes = "List of materials tested with standart PLA print settings:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
 filament_type = PLA
 first_layer_bed_temperature = 100
 first_layer_temperature = 220
@@ -1192,7 +1212,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 compatible_prints_condition = layer_height == 0.05
 exposure_time = 12
 initial_exposure_time = 45
-initial_layer_height = 0.5
+initial_layer_height = 0.05
 material_correction_curing = 1,1,1
 material_correction_printing = 1,1,1
 material_notes = 
@@ -1202,74 +1222,133 @@ inherits = *common 0.05*
 compatible_prints_condition = layer_height == 0.025
 exposure_time = 10
 initial_exposure_time = 35
+initial_layer_height = 0.025
 
 [sla_material:*common 0.035*]
 inherits = *common 0.05*
 compatible_prints_condition = layer_height == 0.035
 exposure_time = 13
 initial_exposure_time = 40
+initial_layer_height = 0.035
 
 [sla_material:*common 0.1*]
 inherits = *common 0.05*
 compatible_prints_condition = layer_height == 0.1
 exposure_time = 20
 initial_exposure_time = 90
+initial_layer_height = 0.1
 
 ########### Materials 0.025
 
-[sla_material:Jamg He Transparent Clear 0.025]
+[sla_material:Bluecast Phrozen Wax 0.025]
 inherits = *common 0.025*
+exposure_time = 8
+initial_exposure_time = 45
 
-[sla_material:Jamg He Transparent Green 0.025]
+[sla_material:Jamg He PJHC-30 Orange 0.025]
 inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
 
-[sla_material:Jamg He Transparent Orange 0.025]
-inherits = *common 0.025*
+########### Materials 0.05
 
-[sla_material:Jamg He Transparent Red 0.025]
-inherits = *common 0.025*
+[sla_material:3DM-HTR140 (high temperature) 0.05]
+inherits = *common 0.05*
+exposure_time = 12
+initial_exposure_time = 45
 
-########### Materials 0.05
+[sla_material:Bluecast Ecogray 0.05]
+inherits = *common 0.05*
+exposure_time = 8
+initial_exposure_time = 45
+
+[sla_material:Bluecast Keramaster 0.05]
+inherits = *common 0.05*
+exposure_time = 8
+initial_exposure_time = 45
 
-[sla_material:Jamg He Transparent Clear 0.05]
+[sla_material:Bluecast Phrozen Wax 0.05]
 inherits = *common 0.05*
+exposure_time = 10
+initial_exposure_time = 55
+
+[sla_material:Jamg He PJHC-00 Yellow 0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 45
 
-[sla_material:Jamg He Transparent Green 0.05]
+[sla_material:Jamg He PJHC-19 Skin 0.05]
 inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 45
 
-[sla_material:Jamg He Transparent Orange 0.05]
+[sla_material:Jamg He PJHC-30 Orange 0.05]
 inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 45
 
-[sla_material:Jamg He Transparent Red 0.05]
+[sla_material:Jamg He PJHC-60 Gray 0.05]
 inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 45
+
+[sla_material:Jamg He PJHC-70 Black 0.05]
+inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 45
+
+[sla_material:Monocure 3D Black Rapid Resin 0.05]
+inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 40
+
+[sla_material:Monocure 3D Blue Rapid Resin 0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 40
+
+[sla_material:Monocure 3D Clear Rapid Resin 0.05]
+inherits = *common 0.05*
+exposure_time = 8
+initial_exposure_time = 40
+
+[sla_material:Monocure 3D Gray Rapid Resin 0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 40
+
+[sla_material:Monocure 3D White Rapid Resin 0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 40
 
 ########### Materials 0.035
 
-[sla_material:Jamg He Transparent Clear 0.035]
-inherits = *common 0.035*
+## [sla_material:Jamg He Transparent Clear 0.035]
+## inherits = *common 0.035*
 
-[sla_material:Jamg He Transparent Green 0.035]
-inherits = *common 0.035*
+## [sla_material:Jamg He Transparent Green 0.035]
+## inherits = *common 0.035*
 
-[sla_material:Jamg He Transparent Orange 0.035]
-inherits = *common 0.035*
+## [sla_material:Jamg He Transparent Orange 0.035]
+## inherits = *common 0.035*
 
-[sla_material:Jamg He Transparent Red 0.035]
-inherits = *common 0.035*
+## [sla_material:Jamg He Transparent Red 0.035]
+## inherits = *common 0.035*
 
 ########### Materials 0.1
 
-[sla_material:Jamg He Transparent Clear 0.1]
-inherits = *common 0.1*
+## [sla_material:Jamg He Transparent Clear 0.1]
+## inherits = *common 0.1*
 
-[sla_material:Jamg He Transparent Green 0.1]
-inherits = *common 0.1*
+## [sla_material:Jamg He Transparent Green 0.1]
+## inherits = *common 0.1*
 
-[sla_material:Jamg He Transparent Orange 0.1]
-inherits = *common 0.1*
+## [sla_material:Jamg He Transparent Orange 0.1]
+## inherits = *common 0.1*
 
-[sla_material:Jamg He Transparent Red 0.1]
-inherits = *common 0.1*
+## [sla_material:Jamg He Transparent Red 0.1]
+## inherits = *common 0.1*
 
 [printer:*common*]
 printer_technology = FFF
@@ -1352,23 +1431,24 @@ parking_pos_retraction = 92
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
 single_extruder_multi_material = 1
+variable_layer_height = 1
 printer_model = MK2SMM
 
 [printer:*mm-single*]
 inherits = *multimaterial*
 end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0
 default_print_profile = 0.15mm OPTIMAL
 
 [printer:*mm-multi*]
 inherits = *multimaterial*
+high_current_on_filament_swap = 1
 end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
+extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259
 nozzle_diameter = 0.4,0.4,0.4,0.4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
-variable_layer_height = 0
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0
 default_print_profile = 0.15mm OPTIMAL
 
 # XXXXXXXXXXXXXXXXX
@@ -1380,12 +1460,12 @@ inherits = *common*
 
 [printer:Original Prusa i3 MK2 0.25 nozzle]
 inherits = *common*
-max_layer_height = 0.1
+max_layer_height = 0.15
 min_layer_height = 0.05
 nozzle_diameter = 0.25
 retract_length = 1
 retract_speed = 50
-variable_layer_height = 0
+variable_layer_height = 1
 printer_variant = 0.25
 default_print_profile = 0.10mm DETAIL 0.25 nozzle
 
@@ -1401,24 +1481,32 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
 # XXX--- MK2MM ---XXX
 # XXXXXXXXXXXXXXXXXXX
 
-[printer:Original Prusa i3 MK2 MM Single Mode]
+[printer:Original Prusa i3 MK2 MMU1 Single]
 inherits = *mm-single*
+max_layer_height = 0.25
+min_layer_height = 0.07
 
-[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
+[printer:Original Prusa i3 MK2 MMU1 Single 0.6 nozzle]
 inherits = *mm-single*
 nozzle_diameter = 0.6
 printer_variant = 0.6
 default_print_profile = 0.20mm NORMAL 0.6 nozzle
+max_layer_height = 0.35
+min_layer_height = 0.1
 
-[printer:Original Prusa i3 MK2 MultiMaterial]
+[printer:Original Prusa i3 MK2 MMU1]
 inherits = *mm-multi*
 nozzle_diameter = 0.4,0.4,0.4,0.4
+max_layer_height = 0.25
+min_layer_height = 0.07
 
-[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
+[printer:Original Prusa i3 MK2 MMU1 0.6 nozzle]
 inherits = *mm-multi*
 nozzle_diameter = 0.6,0.6,0.6,0.6
 printer_variant = 0.6
 default_print_profile = 0.20mm NORMAL 0.6 nozzle
+max_layer_height = 0.35
+min_layer_height = 0.1
 
 # XXXXXXXXXXXXXXXXXXX
 # XXX--- MK2.5 ---XXX
@@ -1428,7 +1516,7 @@ default_print_profile = 0.20mm NORMAL 0.6 nozzle
 inherits = Original Prusa i3 MK2
 printer_model = MK2.5
 remaining_times = 1
-start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5 MMU2 Single]
 inherits = Original Prusa i3 MK2.5; *mm2*
@@ -1457,7 +1545,7 @@ machine_min_travel_rate = 0
 default_print_profile = 0.15mm OPTIMAL MK2.5
 default_filament_profile = Prusament PLA
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
-start_gcode = M107\nM115 U3.4.2 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
+start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
 end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
 
 [printer:Original Prusa i3 MK2.5 MMU2]
@@ -1490,21 +1578,21 @@ single_extruder_multi_material = 1
 # (for example the retract values) are duplicaed from the first value, so they do not need 
 # to be defined explicitely.
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
-extruder_colour = #FF8000;#0080FF;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M107\nM115 U3.4.2 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
+extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
+start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
 end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
 
 [printer:Original Prusa i3 MK2.5 0.25 nozzle]
 inherits = Original Prusa i3 MK2 0.25 nozzle
 printer_model = MK2.5
 remaining_times = 1
-start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5 0.6 nozzle]
 inherits = Original Prusa i3 MK2 0.6 nozzle
 printer_model = MK2.5
 remaining_times = 1
-start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
 
 # XXXXXXXXXXXXXXXXX
 # XXX--- MK3 ---XXX
@@ -1534,14 +1622,14 @@ remaining_times = 1
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
 max_print_height = 210
-start_gcode = M115 U3.4.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+start_gcode = M115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
 printer_model = MK3
 default_print_profile = 0.15mm OPTIMAL MK3
 
 [printer:Original Prusa i3 MK3 0.25 nozzle]
 inherits = Original Prusa i3 MK3
 nozzle_diameter = 0.25
-max_layer_height = 0.1
+max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
@@ -1569,7 +1657,8 @@ default_filament_profile = Prusament PLA MMU2
 [printer:Original Prusa i3 MK3 MMU2 Single]
 inherits = *mm2*
 single_extruder_multi_material = 0
-start_gcode = M107\nM115 U3.4.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
+default_filament_profile = Prusament PLA
+start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
 end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
 
 [printer:Original Prusa i3 MK3 MMU2]
@@ -1579,8 +1668,8 @@ inherits = *mm2*
 # to be defined explicitely.
 machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
-extruder_colour = #FF8000;#0080FF;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M107\nM115 U3.4.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
+extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
+start_gcode = M107\nM115 U3.5.1 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0  F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n
 end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n
 
 [printer:Original Prusa SL1]
@@ -1603,4 +1692,3 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 [obsolete_presets]
 print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
 filament="ColorFabb Brass Bronze 1.75mm";"ColorFabb HT 1.75mm";"ColorFabb nGen 1.75mm";"ColorFabb Woodfil 1.75mm";"ColorFabb XT 1.75mm";"ColorFabb XT-CF20 1.75mm";"E3D PC-ABS 1.75mm";"Fillamentum ABS 1.75mm";"Fillamentum ASA 1.75mm";"Generic ABS 1.75mm";"Generic PET 1.75mm";"Generic PLA 1.75mm";"Prusa ABS 1.75mm";"Prusa HIPS 1.75mm";"Prusa PET 1.75mm";"Prusa PLA 1.75mm";"Taulman Bridge 1.75mm";"Taulman T-Glase 1.75mm"
-printer="Original Prusa SL1 dummy"