Update PrusaResearch bundle & index

2 files changed, 14 insertions, 25 deletions

diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx
index 5dd09868f..f07d8b280 100644
--- a/resources/profiles/PrusaResearch.idx
+++ b/resources/profiles/PrusaResearch.idx
@@ -1,17 +1 @@
-# This is an example configuration version index.
-# The index contains version numbers 
-min_slic3r_version =1.39.0
-1.1.3
-1.1.2
-1.1.1
-1.1.0
-0.2.0-alpha "some test comment"
-max_slic3r_version= 1.39.4
-0.1.0 another test comment
-
-# some empty lines
-
-# version without a comment
-min_slic3r_version = 1.0.0
-max_slic3r_version = 1.1.0
-0.0.1
+0.1.0 Initial
diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
index 0da7f22d1..b313c4dc5 100644
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@@ -7,13 +7,13 @@ name = Prusa Research
 # This means, the server may force the Slic3r configuration to be downgraded.
 config_version = 0.1.0
 # Where to get the updates from?
-# TODO: proper URL
 config_update_url = https://raw.githubusercontent.com/vojtechkral/slic3r-settings-tmp/master/PrusaResearch
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
 #TODO: One day we may differentiate variants of the nozzles / hot ends,
 #for example by the melt zone size, or whether the nozzle is hardened.
+# Printer model name will be shown by the installation wizard.
 [printer_model:MK3]
 name = Original Prusa i3 MK3
 variants = 0.4; 0.25; 0.6
@@ -23,7 +23,6 @@ name = Original Prusa i3 MK2S
 variants = 0.4; 0.25; 0.6
 
 [printer_model:MK2SMM]
-# Printer model name will be shown by the installation wizard.
 name = Original Prusa i3 MK2SMM
 variants = 0.4; 0.6
 
@@ -69,6 +68,7 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 interface_shells = 0
+max_print_height = 200
 max_print_speed = 100
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
@@ -120,7 +120,7 @@ thin_walls = 0
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 40
 travel_speed = 180
-wipe_tower = 0
+wipe_tower = 1
 wipe_tower_per_color_wipe = 20
 wipe_tower_width = 60
 wipe_tower_x = 180
@@ -939,6 +939,8 @@ inherits = *multimaterial*
 end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
 start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+default_print_profile = 0.15mm OPTIMAL
+default_filament_profile = Prusa PLA
 
 [printer:*mm-multi*]
 inherits = *multimaterial*
@@ -948,10 +950,11 @@ nozzle_diameter = 0.4,0.4,0.4,0.4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
 start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
 variable_layer_height = 0
+default_print_profile = 0.15mm OPTIMAL
+default_filament_profile = Prusa PLA
 
 [printer:Original Prusa i3 MK2]
 inherits = *common*
-default_print_profile = 0.15mm OPTIMAL
 
 [printer:Original Prusa i3 MK2 0.25 nozzle]
 inherits = *common*
@@ -989,12 +992,14 @@ nozzle_diameter = 0.4,0.4,0.4,0.4
 inherits = *mm-multi*
 nozzle_diameter = 0.6,0.6,0.6,0.6
 printer_variant = 0.6
+default_print_profile = 0.20mm NORMAL 0.6 nozzle
 
 [printer:Original Prusa i3 MK3]
 inherits = *common*
 end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
+max_print_height = 210
 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
 printer_model = MK3
 default_print_profile = 0.15mm OPTIMAL MK3
@@ -1002,21 +1007,21 @@ default_print_profile = 0.15mm OPTIMAL MK3
 [printer:Original Prusa i3 MK3 0.25 nozzle]
 inherits = *common*
 nozzle_diameter = 0.25
-printer_variant = 0.25
 end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
+max_print_height = 210
 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
 printer_model = MK3
-default_print_profile = 0.10mm DETAIL MK3
+default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3
 
 [printer:Original Prusa i3 MK3 0.6 nozzle]
 inherits = *common*
 nozzle_diameter = 0.6
-printer_variant = 0.6
 end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
+max_print_height = 210
 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
 printer_model = MK3
-default_print_profile = 0.15mm OPTIMAL MK3
+default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3