General print quality improvements.

After reviewing many test prints, these changes to print speeds and to line widths seem to have a positive improvement on print quality with BIBO2 printers.

Additionally several items were made more consistant especially with the external_perimeter_speed values.

1 files changed, 13 insertions, 12 deletions

diff --git a/resources/profiles/BIBO.ini b/resources/profiles/BIBO.ini
index 8247a34a7..4a10de3cb 100644
--- a/resources/profiles/BIBO.ini
+++ b/resources/profiles/BIBO.ini
@@ -31,17 +31,18 @@ avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 25
+bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
-compatible_printers =
+compatible_printers = 
 complete_objects = 0
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeters_first = 0
-external_perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.40
+external_perimeter_speed = 25
 extra_perimeters = 0
 extruder_clearance_height = 12
 extruder_clearance_radius = 45
@@ -52,14 +53,14 @@ fill_pattern = grid
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 20
-gap_fill_speed = 30
+gap_fill_speed = 15
 gcode_comments = 0
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 25%
+infill_overlap = 20%
 interface_shells = 0
 max_print_speed = 60
 max_volumetric_extrusion_rate_slope_negative = 0
@@ -83,7 +84,7 @@ single_extruder_multi_material_priming = 0
 skirts = 3
 skirt_distance = 2
 skirt_height = 1
-small_perimeter_speed = 25
+small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -92,7 +93,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_extruder = 0
-support_material_extrusion_width = 0.4
+support_material_extrusion_width = 0.40
 support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
@@ -110,8 +111,8 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
+top_infill_extrusion_width = 0.40
+top_solid_infill_speed = 20
 travel_speed = 130
 wipe_tower = 0
 wipe_tower_bridging = 10
@@ -194,7 +195,7 @@ top_solid_layers = 7
 
 [print:*0.15mm*]
 inherits = *common*
-external_perimeter_speed = 40
+external_perimeter_speed = 25
 infill_acceleration = 1100
 infill_speed = 50
 layer_height = 0.15
@@ -242,7 +243,7 @@ top_solid_layers = 4
 inherits = *common*
 bottom_solid_layers = 4
 bridge_flow_ratio = 0.95
-external_perimeter_speed = 40
+external_perimeter_speed = 25
 infill_acceleration = 1100
 infill_speed = 60
 layer_height = 0.3
@@ -334,7 +335,7 @@ inherits = *0.30mm*
 # alias = 0.30mm ULTRADRAFT
 bottom_solid_layers = 3
 bridge_speed = 30
-external_perimeter_speed = 35
+external_perimeter_speed = 30
 infill_acceleration = 1100
 infill_speed = 55
 max_print_speed = 60