BIBO2 profile:

Removed compatible_printers_condition = printer_family=="BIBO2"
printer_family variable is not supported, though it is a good idea.
Fortunately it was not needed for the BIBO2 printer as of now.

2 files changed, 3 insertions, 13 deletions

diff --git a/resources/profiles/BIBO2Touch.idx b/resources/profiles/BIBO2Touch.idx
index d8356ae3f..f8ad05323 100644
--- a/resources/profiles/BIBO2Touch.idx
+++ b/resources/profiles/BIBO2Touch.idx
@@ -1,10 +1,10 @@
 min_slic3r_version = 2.2.0-alpha3
+0.0.1 Multiple Print models were unified into a single one.
 0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
 0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
 0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
 0.0.1-alpha12 github repo created for version history
-0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions.
-Improved single extruder second nozzle standby temperature
+0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
 0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
 # The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
 # so they will see the print bed.
diff --git a/resources/profiles/BIBO2Touch.ini b/resources/profiles/BIBO2Touch.ini
index 32f14b045..9a24e73e9 100644
--- a/resources/profiles/BIBO2Touch.ini
+++ b/resources/profiles/BIBO2Touch.ini
@@ -5,7 +5,7 @@
 name = BIBO
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.1-beta2
+config_version = 0.0.1
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
@@ -275,19 +275,16 @@ top_solid_infill_speed = 30
 [print:0.05mm ULTRADETAIL @BIBO2]
 inherits = *0.05mm*
 # alias = 0.05mm ULTRADETAIL
-compatible_printers_condition = printer_family=="BIBO2"
 infill_extrusion_width = 0.5
 
 [print:0.07mm SUPERDETAIL @BIBO2]
 inherits = *0.07mm*
 # alias = 0.07mm SUPERDETAIL
-compatible_printers_condition = printer_family=="BIBO2"
 infill_extrusion_width = 0.5
 
 [print:0.10mm HIGHDETAIL @BIBO2]
 inherits = *0.10mm*
 # alias = 0.10mm HIGHDETAIL
-compatible_printers_condition = printer_family=="BIBO2"
 infill_extrusion_width = 0.5
 
 [print:0.12mm DETAIL @BIBO2]
@@ -298,12 +295,10 @@ infill_speed = 50
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printerfamily=="BIBO2"
 
 [print:0.15mm OPTIMAL @BIBO2]
 inherits = *0.15mm*
 # alias = 0.15mm OPTIMAL
-compatible_printers_condition = printer_family=="BIBO2"
 top_infill_extrusion_width = 0.45
 
 [print:0.20mm NORMAL @BIBO2]
@@ -314,7 +309,6 @@ infill_speed = 50
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_family=="BIBO2"
 
 [print:0.24mm DRAFT @BIBO2]
 inherits = *0.24mm*
@@ -324,7 +318,6 @@ infill_speed = 50
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_family=="BIBO2"
 
 [print:0.28mm SUPERDRAFT @BIBO2]
 inherits = *0.28mm*
@@ -334,7 +327,6 @@ infill_speed = 50
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_family=="BIBO2"
 
 [print:0.30mm ULTRADRAFT @BIBO2]
 inherits = *0.30mm*
@@ -358,7 +350,6 @@ perimeter_extrusion_width = 0.5
 solid_infill_extrusion_width = 0.5
 top_infill_extrusion_width = 0.45
 support_material_extrusion_width = 0.38
-compatible_printers_condition = printer_family=="BIBO2"
 
 # Soluble Supports Profiles for dual extrusion #
 [print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
@@ -477,7 +468,6 @@ inherits = *common*
 bed_temperature = 50
 bridge_fan_speed = 80
 # For now, all but selected filaments are disabled for the MMU 2.0
-compatible_printers_condition = printer_family=="BIBO2"
 cooling = 0
 disable_fan_first_layers = 3
 extrusion_multiplier = 1.2