Removed slic3r.pl, updated Build.PL with a notice, that the Perl

bindings are optional, not required to run Slic3r.

1 files changed, 0 insertions, 557 deletions

diff --git a/slic3r.pl b/slic3r.pl
deleted file mode 100755
index 95427443b..000000000
--- a/slic3r.pl
+++ /dev/null
@@ -1,557 +0,0 @@
-#!/usr/bin/env perl
-
-use strict;
-use warnings;
-
-BEGIN {
-    use FindBin;
-    use lib "$FindBin::Bin/lib";
-    use local::lib '--no-create', "$FindBin::Bin/local-lib";
-}
-
-use File::Basename qw(basename);
-use Getopt::Long qw(:config no_auto_abbrev);
-use List::Util qw(first);
-#use POSIX qw(setlocale LC_NUMERIC);
-use Slic3r;
-use Slic3r::Geometry qw(deg2rad);
-use Time::HiRes qw(gettimeofday tv_interval);
-$|++;
-binmode STDOUT, ':utf8';
-
-# Convert all parameters from the local code page to utf8 on Windows.
-@ARGV = map Slic3r::decode_path($_), @ARGV if $^O eq 'MSWin32';
-
-our %opt = ();
-my %cli_options = ();
-{
-    my %options = (
-        'help'                  => sub { usage() },
-        'version'               => sub { print "$Slic3r::VERSION\n"; exit 0 },
-        
-        'debug'                 => \$Slic3r::debug,
-        'gui'                   => \$opt{gui},
-        'no-gui'                   => \$opt{no_gui},
-        'o|output=s'            => \$opt{output},
-        
-        'save=s'                => \$opt{save},
-        'load=s@'               => \$opt{load},
-        'autosave=s'            => \$opt{autosave},
-        'ignore-nonexistent-config' => \$opt{ignore_nonexistent_config},
-        'no-plater'             => \$opt{no_plater},
-        'gui-mode=s'            => \$opt{obsolete_ignore_this_option_gui_mode},
-        'datadir=s'             => \$opt{datadir},
-        'export-png'            => \$opt{export_png},
-        'merge|m'               => \$opt{merge},
-        'repair'                => \$opt{repair},
-        'cut=f'                 => \$opt{cut},
-        'split'                 => \$opt{split},
-        'info'                  => \$opt{info},
-        
-        'scale=f'               => \$opt{scale},
-        'rotate=f'              => \$opt{rotate},
-        'duplicate=i'           => \$opt{duplicate},
-        'duplicate-grid=s'      => \$opt{duplicate_grid},
-        'print-center=s'        => \$opt{print_center},
-        'dont-arrange'          => \$opt{dont_arrange},
-    );
-    foreach my $opt_key (keys %{$Slic3r::Config::Options}) {
-        my $cli = $Slic3r::Config::Options->{$opt_key}->{cli} or next;
-        # allow both the dash-separated option name and the full opt_key
-        $options{ "$opt_key|$cli" } = \$cli_options{$opt_key};
-    }
-    
-    @ARGV = grep !/^-psn_\d/, @ARGV if $^O eq 'darwin';
-    GetOptions(%options) or usage(1);
-}
-
-# load configuration files
-my @external_configs = ();
-if ($opt{load}) {
-    foreach my $configfile (@{$opt{load}}) {
-        if (-e $configfile) {
-            push @external_configs, Slic3r::Config::load($configfile);
-        } elsif (-e "$FindBin::Bin/$configfile") {
-            printf STDERR "Loading $FindBin::Bin/$configfile\n";
-            push @external_configs, Slic3r::Config::load("$FindBin::Bin/$configfile");
-        } else {
-            $opt{ignore_nonexistent_config} or die "Cannot find specified configuration file ($configfile).\n";
-        }
-    }
-}
-
-# process command line options
-my $cli_config = Slic3r::Config->new;
-foreach my $c (@external_configs, Slic3r::Config->new_from_cli(%cli_options)) {
-    $c->normalize;  # expand shortcuts before applying, otherwise destination values would be already filled with defaults
-    $cli_config->apply($c);
-}
-
-# save configuration
-if ($opt{save}) {
-    if (@{$cli_config->get_keys} > 0) {
-        $cli_config->save($opt{save});
-    } else {
-        Slic3r::Config::new_from_defaults->save($opt{save});
-    }
-}
-
-# apply command line config on top of default config
-my $config = Slic3r::Config::new_from_defaults;
-$config->apply($cli_config);
-
-# launch GUI
-my $gui;
-if ((!@ARGV || $opt{gui}) && !$opt{no_gui} && !$opt{save} && eval "require Slic3r::GUI; 1") {
-    {
-        no warnings 'once';
-        $Slic3r::GUI::datadir       = Slic3r::decode_path($opt{datadir} // '');
-        $Slic3r::GUI::no_plater     = $opt{no_plater};
-        $Slic3r::GUI::autosave      = $opt{autosave};
-    }
-    Slic3r::GUI::set_gui_appctl();
-    $gui = Slic3r::GUI->new;
-    #setlocale(LC_NUMERIC, 'C');
-    $gui->{mainframe}->load_config_file($_) for @{$opt{load}};
-    $gui->{mainframe}->load_config($cli_config);
-    my @input_files = @ARGV;
-    $gui->{mainframe}{plater}->load_files(\@input_files) unless $opt{no_plater};
-    $gui->MainLoop;
-    exit;
-}
-die $@ if $@ && $opt{gui};
-
-if (@ARGV) {  # slicing from command line
-    Slic3r::GUI::set_cli_appctl();
-    my $appctl = Slic3r::AppController->new();
-
-    $config->validate;
-    
-    if ($opt{repair}) {
-        foreach my $file (@ARGV) {
-            die "Repair is currently supported only on STL files\n"
-                if $file !~ /\.[sS][tT][lL]$/;
-            
-            my $output_file = $file;
-            $output_file =~ s/\.([sS][tT][lL])$/_fixed.obj/;
-            my $tmesh = Slic3r::TriangleMesh->new;
-            $tmesh->ReadSTLFile($file);
-            $tmesh->repair;
-            $tmesh->WriteOBJFile($output_file);
-        }
-        exit;
-    }
-    
-    if ($opt{cut}) {
-        foreach my $file (@ARGV) {
-            my $model = Slic3r::Model->read_from_file($file);
-            my $mesh = $model->mesh;
-            $mesh->translate(0, 0, -$mesh->bounding_box->z_min);
-            my $upper = Slic3r::TriangleMesh->new;
-            my $lower = Slic3r::TriangleMesh->new;
-            $mesh->cut($opt{cut}, $upper, $lower);
-            $upper->repair;
-            $lower->repair;
-            $upper->write_ascii("${file}_upper.stl")
-                if $upper->facets_count > 0;
-            $lower->write_ascii("${file}_lower.stl")
-                if $lower->facets_count > 0;
-        }
-        exit;
-    }
-    
-    if ($opt{split}) {
-        foreach my $file (@ARGV) {
-            my $model = Slic3r::Model->read_from_file($file);
-            my $mesh = $model->mesh;
-            $mesh->repair;
-            
-            my $part_count = 0;
-            foreach my $new_mesh (@{$mesh->split}) {
-                my $output_file = sprintf '%s_%02d.stl', $file, ++$part_count;
-                printf "Writing to %s\n", basename($output_file);
-                $new_mesh->write_binary($output_file);
-            }
-        }
-        exit;
-    }
-    
-    while (my $input_file = shift @ARGV) {
-        my $model;
-        if ($opt{merge}) {
-            my @models = map Slic3r::Model->read_from_file($_), $input_file, (splice @ARGV, 0);
-            $model = Slic3r::Model->merge(@models);
-        } else {
-            $model = Slic3r::Model->read_from_file($input_file);
-        }
-        
-        if ($opt{info}) {
-            $model->print_info;
-            next;
-        }
-        
-        if (defined $opt{duplicate_grid}) {
-            $opt{duplicate_grid} = [ split /[,x]/, $opt{duplicate_grid}, 2 ];
-        }
-        if (defined $opt{print_center}) {
-            $opt{print_center} = Slic3r::Pointf->new(split /[,x]/, $opt{print_center}, 2);
-        }
-        
-        my $sprint = Slic3r::Print::Simple->new(
-            scale           => $opt{scale}          // 1,
-            rotate          => deg2rad($opt{rotate} // 0),
-            duplicate       => $opt{duplicate}      // 1,
-            duplicate_grid  => $opt{duplicate_grid} // [1,1],
-            print_center    => $opt{print_center}   // Slic3r::Pointf->new(100,100),
-            dont_arrange    => $opt{dont_arrange}   // 0,
-            output_file     => $opt{output},
-        );
-        
-        # This is delegated to C++ PrintObject::apply_config().
-        $sprint->apply_config($config);
-        $sprint->set_model($model);
-        # Do the apply_config once again to validate the layer height profiles at all the newly added PrintObjects.
-        $sprint->apply_config($config);
-        
-        if ($opt{export_png}) {
-            # $sprint->export_png;
-            $appctl->set_model($model);
-            $appctl->set_print($sprint->_print);
-            $appctl->print_ctl()->slice_to_png();
-        } else {
-            my $t0 = [gettimeofday];
-            # The following call may die if the output_filename_format template substitution fails,
-            # if the file cannot be written into, or if the post processing scripts cannot be executed.
-            $sprint->export_gcode;
-            
-            # output some statistics
-            {
-                my $duration = tv_interval($t0);
-                printf "Done. Process took %d minutes and %.3f seconds\n", 
-                    int($duration/60), ($duration - int($duration/60)*60);  # % truncates to integer
-            }
-            printf "Filament required: %.1fmm (%.1fcm3)\n",
-                $sprint->total_used_filament, $sprint->total_extruded_volume/1000;
-        }
-    }
-} else {
-    usage(1) unless $opt{save};
-}
-
-sub usage {
-    my ($exit_code) = @_;
-    my $config = Slic3r::Config::new_from_defaults->as_hash;
-    print <<"EOF";
-Slic3r $Slic3r::VERSION is a STL-to-GCODE translator for RepRap 3D printers
-written by Alessandro Ranellucci <aar\@cpan.org> - http://slic3r.org/
-
-Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ...
-
-    --help              Output this usage screen and exit
-    --version           Output the version of Slic3r and exit
-    --save <file>       Save configuration to the specified file
-    --load <file>       Load configuration from the specified file. It can be used 
-                        more than once to load options from multiple files.
-    -o, --output <file> File to output gcode to (by default, the file will be saved
-                        into the same directory as the input file using the
-                        --output-filename-format to generate the filename.) If a
-                        directory is specified for this option, the output will
-                        be saved under that directory, and the filename will be
-                        generated by --output-filename-format.
-  
-  Non-slicing actions (no G-code will be generated):
-    --repair            Repair given STL files and save them as <name>_fixed.obj
-    --cut <z>           Cut given input files at given Z (relative) and export
-                        them as <name>_upper.stl and <name>_lower.stl
-    --split             Split the shells contained in given STL file into several STL files
-    --info              Output information about the supplied file(s) and exit
-    -j, --threads <num> Number of threads to use (1+, default: $config->{threads})
-
-  GUI options:
-    --gui               Forces the GUI launch instead of command line slicing (if you
-                        supply a model file, it will be loaded into the plater)
-    --no-plater         Disable the plater tab
-    --no-gui            Forces the command line slicing instead of gui. 
-                        This takes precedence over --gui if both are present.
-    --autosave <file>   Automatically export current configuration to the specified file
-
-  Output options:
-    --output-filename-format
-                        Output file name format; all config options enclosed in brackets
-                        will be replaced by their values, as well as [input_filename_base]
-                        and [input_filename] (default: $config->{output_filename_format})
-    --post-process      Generated G-code will be processed with the supplied script;
-                        call this more than once to process through multiple scripts.
-    --export-png        Export zipped PNG files containing slices instead of G-code.
-    -m, --merge         If multiple files are supplied, they will be composed into a single 
-                        print rather than processed individually.
-  
-  Printer options:
-    --nozzle-diameter   Diameter of nozzle in mm (default: $config->{nozzle_diameter}->[0])
-    --print-center      Coordinates in mm of the point to center the print around
-                        (default: 100,100)
-    --z-offset          Additional height in mm to add to vertical coordinates
-                        (+/-, default: $config->{z_offset})
-    --gcode-flavor      The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
-                        default: $config->{gcode_flavor})
-    --use-relative-e-distances Enable this to get relative E values (default: no)
-    --use-firmware-retraction  Enable firmware-controlled retraction using G10/G11 (default: no)
-    --use-volumetric-e  Express E in cubic millimeters and prepend M200 (default: no)
-    --set-and-wait-temperatures Use M190 instead of M140 for temperature changes past the first (default: no)
-    --gcode-comments    Make G-code verbose by adding comments (default: no)
-    
-  Filament options:
-    --filament-diameter Diameter in mm of your raw filament (default: $config->{filament_diameter}->[0])
-    --extrusion-multiplier
-                        Change this to alter the amount of plastic extruded. There should be
-                        very little need to change this value, which is only useful to 
-                        compensate for filament packing (default: $config->{extrusion_multiplier}->[0])
-    --temperature       Extrusion temperature in degree Celsius, set 0 to disable (default: $config->{temperature}->[0])
-    --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,
-                        set 0 to disable (default: same as --temperature)
-    --bed-temperature   Heated bed temperature in degree Celsius, set 0 to disable (default: $config->{bed_temperature}[0])
-    --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,
-                        set 0 to disable (default: same as --bed-temperature)
-    
-  Speed options:
-    --travel-speed      Speed of non-print moves in mm/s (default: $config->{travel_speed})
-    --perimeter-speed   Speed of print moves for perimeters in mm/s (default: $config->{perimeter_speed})
-    --small-perimeter-speed
-                        Speed of print moves for small perimeters in mm/s or % over perimeter speed
-                        (default: $config->{small_perimeter_speed})
-    --external-perimeter-speed
-                        Speed of print moves for the external perimeter in mm/s or % over perimeter speed
-                        (default: $config->{external_perimeter_speed})
-    --infill-speed      Speed of print moves in mm/s (default: $config->{infill_speed})
-    --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed
-                        (default: $config->{solid_infill_speed})
-    --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed
-                        (default: $config->{top_solid_infill_speed})
-    --support-material-speed
-                        Speed of support material print moves in mm/s (default: $config->{support_material_speed})
-    --support-material-interface-speed
-                        Speed of support material interface print moves in mm/s or % over support material
-                        speed (default: $config->{support_material_interface_speed})
-    --bridge-speed      Speed of bridge print moves in mm/s (default: $config->{bridge_speed})
-    --gap-fill-speed    Speed of gap fill print moves in mm/s (default: $config->{gap_fill_speed})
-    --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute
-                        value or as a percentage over normal speeds (default: $config->{first_layer_speed})
-    
-  Acceleration options:
-    --perimeter-acceleration
-                        Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero
-                        to disable; default: $config->{perimeter_acceleration})
-    --infill-acceleration
-                        Overrides firmware's default acceleration for infill. (mm/s^2, set zero
-                        to disable; default: $config->{infill_acceleration})
-    --bridge-acceleration
-                        Overrides firmware's default acceleration for bridges. (mm/s^2, set zero
-                        to disable; default: $config->{bridge_acceleration})
-    --first-layer-acceleration
-                        Overrides firmware's default acceleration for first layer. (mm/s^2, set zero
-                        to disable; default: $config->{first_layer_acceleration})
-    --default-acceleration
-                        Acceleration will be reset to this value after the specific settings above
-                        have been applied. (mm/s^2, set zero to disable; default: $config->{default_acceleration})
-    
-  Accuracy options:
-    --layer-height      Layer height in mm (default: $config->{layer_height})
-    --first-layer-height Layer height for first layer (mm or %, default: $config->{first_layer_height})
-    --infill-every-layers
-                        Infill every N layers (default: $config->{infill_every_layers})
-    --solid-infill-every-layers
-                        Force a solid layer every N layers (default: $config->{solid_infill_every_layers})
-  
-  Print options:
-    --perimeters        Number of perimeters/horizontal skins (range: 0+, default: $config->{perimeters})
-    --top-solid-layers  Number of solid layers to do for top surfaces (range: 0+, default: $config->{top_solid_layers})
-    --bottom-solid-layers  Number of solid layers to do for bottom surfaces (range: 0+, default: $config->{bottom_solid_layers})
-    --solid-layers      Shortcut for setting the two options above at once
-    --fill-density      Infill density (range: 0%-100%, default: $config->{fill_density}%)
-    --fill-angle        Infill angle in degrees (range: 0-90, default: $config->{fill_angle})
-    --fill-pattern      Pattern to use to fill non-solid layers (default: $config->{fill_pattern})
-    --external-fill-pattern Pattern to use to fill solid layers (default: $config->{external_fill_pattern})
-    --start-gcode       Load initial G-code from the supplied file. This will overwrite
-                        the default command (home all axes [G28]).
-    --end-gcode         Load final G-code from the supplied file. This will overwrite 
-                        the default commands (turn off temperature [M104 S0],
-                        home X axis [G28 X], disable motors [M84]).
-    --before-layer-gcode  Load before-layer-change G-code from the supplied file (default: nothing).
-    --layer-gcode       Load layer-change G-code from the supplied file (default: nothing).
-    --toolchange-gcode  Load tool-change G-code from the supplied file (default: nothing).
-    --seam-position     Position of loop starting points (random/nearest/aligned, default: $config->{seam_position}).
-    --external-perimeters-first Reverse perimeter order. (default: no)
-    --spiral-vase       Experimental option to raise Z gradually when printing single-walled vases
-                        (default: no)
-    --only-retract-when-crossing-perimeters
-                        Disable retraction when travelling between infill paths inside the same island.
-                        (default: no)
-    --solid-infill-below-area
-                        Force solid infill when a region has a smaller area than this threshold
-                        (mm^2, default: $config->{solid_infill_below_area})
-    --infill-only-where-needed
-                        Only infill under ceilings (default: no)
-    --infill-first      Make infill before perimeters (default: no)
-  
-   Quality options (slower slicing):
-    --extra-perimeters  Add more perimeters when needed (default: yes)
-    --ensure-vertical-shell-thickness Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers). (default: no)
-    --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no)
-    --thin-walls        Detect single-width walls (default: yes)
-    --overhangs         Experimental option to use bridge flow, speed and fan for overhangs
-                        (default: yes)
-  
-   Support material options:
-    --support-material  Generate support material for overhangs
-    --support-material-threshold
-                        Overhang threshold angle (range: 0-90, set 0 for automatic detection,
-                        default: $config->{support_material_threshold})
-    --support-material-pattern
-                        Pattern to use for support material (default: $config->{support_material_pattern})
-    --support-material-with-sheath
-                        Add a sheath (a single perimeter line) around the base support.
-                        This makes the support more reliable, but also more difficult to remove. (default: yes)
-    --support-material-spacing
-                        Spacing between pattern lines (mm, default: $config->{support_material_spacing})
-    --support-material-angle
-                        Support material angle in degrees (range: 0-90, default: $config->{support_material_angle})
-    --support-material-contact-distance
-                        Vertical distance between object and support material (0+, default: $config->{support_material_contact_distance})
-    --support-material-xy-spacing
-                        "XY separation between an object and its support. If expressed as percentage (for example 50%),
-                        it will be calculated over external perimeter width (default: half of exteral perimeter width)
-    --support-material-interface-layers
-                        Number of perpendicular layers between support material and object (0+, default: $config->{support_material_interface_layers})
-    --support-material-interface-spacing
-                        Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: $config->{support_material_interface_spacing})
-    --raft-layers       Number of layers to raise the printed objects by (range: 0+, default: $config->{raft_layers})
-    --support-material-enforce-layers
-                        Enforce support material on the specified number of layers from bottom,
-                        regardless of --support-material and threshold (0+, default: $config->{support_material_enforce_layers})
-    --support-material-buildplate-only
-                        Only create support if it lies on a build plate. Don't create support on a print. (default: no)
-    --dont-support-bridges
-                        Experimental option for preventing support material from being generated under bridged areas (default: yes)
-  
-   Retraction options:
-    --retract-length    Length of retraction in mm when pausing extrusion (default: $config->{retract_length}[0])
-    --retract-speed     Speed for retraction in mm/s (default: $config->{retract_speed}[0])
-    --deretract-speed   Speed for deretraction (loading of filament after a retract) in mm/s (default: $config->{retract_speed}[0])
-    --retract-restart-extra
-                        Additional amount of filament in mm to push after
-                        compensating retraction (default: $config->{retract_restart_extra}[0])
-    --retract-before-travel
-                        Only retract before travel moves of this length in mm (default: $config->{retract_before_travel}[0])
-    --retract-lift      Lift Z by the given distance in mm when retracting (default: $config->{retract_lift}[0])
-    --retract-lift-above Only lift Z when above the specified height (default: $config->{retract_lift_above}[0])
-    --retract-lift-below Only lift Z when below the specified height (default: $config->{retract_lift_below}[0])
-    --retract-layer-change
-                        Enforce a retraction before each Z move (default: no)
-    --wipe              Wipe the nozzle while doing a retraction (default: no)
-    
-   Retraction options for multi-extruder setups:
-    --retract-length-toolchange
-                        Length of retraction in mm when disabling tool (default: $config->{retract_length_toolchange}[0])
-    --retract-restart-extra-toolchange
-                        Additional amount of filament in mm to push after
-                        switching tool (default: $config->{retract_restart_extra_toolchange}[0])
-   
-   Cooling options:
-    --cooling           Enable fan and cooling control
-    --min-fan-speed     Minimum fan speed (default: $config->{min_fan_speed}[0]%)
-    --max-fan-speed     Maximum fan speed (default: $config->{max_fan_speed}[0]%)
-    --bridge-fan-speed  Fan speed to use when bridging (default: $config->{bridge_fan_speed}[0]%)
-    --fan-below-layer-time Enable fan if layer print time is below this approximate number 
-                        of seconds (default: $config->{fan_below_layer_time}[0])
-    --slowdown-below-layer-time Slow down if layer print time is below this approximate number
-                        of seconds (default: $config->{slowdown_below_layer_time}[0])
-    --min-print-speed   Minimum print speed (mm/s, default: $config->{min_print_speed}[0])
-    --disable-fan-first-layers Disable fan for the first N layers (default: $config->{disable_fan_first_layers}[0])
-    --fan-always-on     Keep fan always on at min fan speed, even for layers that don't need
-                        cooling
-   
-   Skirt options:
-    --skirts            Number of skirts to draw (0+, default: $config->{skirts})
-    --skirt-distance    Distance in mm between innermost skirt and object 
-                        (default: $config->{skirt_distance})
-    --skirt-height      Height of skirts to draw (expressed in layers, 0+, default: $config->{skirt_height})
-    --min-skirt-length  Generate no less than the number of loops required to consume this length
-                        of filament on the first layer, for each extruder (mm, 0+, default: $config->{min_skirt_length})
-    --brim-width        Width of the brim that will get added to each object to help adhesion
-                        (mm, default: $config->{brim_width})
-   
-   Transform options:
-    --scale             Factor for scaling input object (default: 1)
-    --rotate            Rotation angle in degrees (0-360, default: 0)
-    --duplicate         Number of items with auto-arrange (1+, default: 1)
-    --duplicate-grid    Number of items with grid arrangement (default: 1,1)
-    --duplicate-distance Distance in mm between copies (default: $config->{duplicate_distance})
-    --dont-arrange      Don't arrange the objects on the build plate. The model coordinates
-                        define the absolute positions on the build plate. 
-                        The option --print-center will be ignored.
-    --clip_multipart_objects 
-                        When printing multi-material objects, this settings will make slic3r to clip the overlapping 
-                        object parts one by the other (2nd part will be clipped by the 1st, 3rd part will be clipped 
-                        by the 1st and 2nd etc). (default: $config->{clip_multipart_objects})";
-    --elefant-foot-compensation
-                        Shrink the first layer by the configured value to compensate for the 1st layer squish 
-                        aka an Elefant Foot effect (mm, default: $config->{elefant_foot_compensation})
-    --xy-size-compensation
-                        Grow/shrink objects by the configured absolute distance (mm, default: $config->{xy_size_compensation})
-   
-   Sequential printing options:
-    --complete-objects  When printing multiple objects and/or copies, complete each one before
-                        starting the next one; watch out for extruder collisions (default: no)
-    --extruder-clearance-radius Radius in mm above which extruder won't collide with anything
-                        (default: $config->{extruder_clearance_radius})
-    --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from 
-                        extruder tip and carriage bottom (default: $config->{extruder_clearance_height})
-   
-   Miscellaneous options:
-    --notes             Notes to be added as comments to the output file
-    --resolution        Minimum detail resolution (mm, set zero for full resolution, default: $config->{resolution})
-  
-   Flow options (advanced):
-    --extrusion-width   Set extrusion width manually; it accepts either an absolute value in mm
-                        (like 0.65) or a percentage over layer height (like 200%)
-    --first-layer-extrusion-width
-                        Set a different extrusion width for first layer
-    --perimeter-extrusion-width
-                        Set a different extrusion width for perimeters
-    --external-perimeter-extrusion-width
-                        Set a different extrusion width for external perimeters
-    --infill-extrusion-width
-                        Set a different extrusion width for infill
-    --solid-infill-extrusion-width
-                        Set a different extrusion width for solid infill
-    --top-infill-extrusion-width
-                        Set a different extrusion width for top infill
-    --support-material-extrusion-width
-                        Set a different extrusion width for support material
-    --infill-overlap    Overlap between infill and perimeters (default: $config->{infill_overlap})
-    --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: $config->{bridge_flow_ratio})
-  
-   Multiple extruder options:
-    --extruder-offset   Offset of each extruder, if firmware doesn't handle the displacement
-                        (can be specified multiple times, default: 0x0)
-    --perimeter-extruder
-                        Extruder to use for perimeters and brim (1+, default: $config->{perimeter_extruder})
-    --infill-extruder   Extruder to use for infill (1+, default: $config->{infill_extruder})
-    --solid-infill-extruder   Extruder to use for solid infill (1+, default: $config->{solid_infill_extruder})
-    --support-material-extruder
-                        Extruder to use for support material, raft and skirt 
-                        (1+, 0 to use the current extruder to minimize tool changes, default: $config->{support_material_extruder})
-    --support-material-interface-extruder
-                        Extruder to use for support material interface 
-                        (1+, 0 to use the current extruder to minimize tool changes, default: $config->{support_material_interface_extruder})
-    --ooze-prevention   Drop temperature and park extruders outside a full skirt for automatic wiping
-                        (default: no)
-    --standby-temperature-delta
-                        Temperature difference to be applied when an extruder is not active and
-                        --ooze-prevention is enabled (default: $config->{standby_temperature_delta})
-    
-EOF
-    exit ($exit_code || 0);
-}
-
-__END__