diff options
| author | bubnikv <bubnikv@gmail.com> | 2017-07-20 14:38:10 +0300 |
|---|---|---|
| committer | bubnikv <bubnikv@gmail.com> | 2017-07-20 14:38:10 +0300 |
| commit | 969e3f4a80552a2fce08537c34250d6d34135e08 (patch) | |
| tree | e03153759dea69f18c15a2fe25795cf5e73a9d36 /xs/src/libslic3r/SupportMaterial.cpp | |
| parent | 7103fa78ff732c2b8a23ec83937740119fc4044c (diff) | |
Fixed "Fill angle of any number other than an Integer does not work"
https://github.com/prusa3d/Slic3r/issues/427
Also enabled floating point rotation angle for supports.
Diffstat (limited to 'xs/src/libslic3r/SupportMaterial.cpp')
| -rw-r--r-- | xs/src/libslic3r/SupportMaterial.cpp | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/xs/src/libslic3r/SupportMaterial.cpp b/xs/src/libslic3r/SupportMaterial.cpp index 7f99de906..7b3d3ec0b 100644 --- a/xs/src/libslic3r/SupportMaterial.cpp +++ b/xs/src/libslic3r/SupportMaterial.cpp @@ -948,7 +948,7 @@ PrintObjectSupportMaterial::MyLayersPtr PrintObjectSupportMaterial::top_contact_ slices_margin_cached, // How much to offset the extracted contour outside of the grid. m_object_config->support_material_spacing.value + m_support_material_flow.spacing(), - Geometry::deg2rad(double(m_object_config->support_material_angle))); + Geometry::deg2rad(m_object_config->support_material_angle)); // 1) infill polygons, expand them by half the extrusion width + a tiny bit of extra. new_layer.polygons = support_grid_pattern.extract_support(m_support_material_flow.scaled_spacing()/2 + 5); // 2) Contact polygons will be projected down. To keep the interface and base layers to grow, return a contour a tiny bit smaller than the grid cells. @@ -1155,7 +1155,7 @@ PrintObjectSupportMaterial::MyLayersPtr PrintObjectSupportMaterial::bottom_conta trimming, // How much to offset the extracted contour outside of the grid. m_object_config->support_material_spacing.value + m_support_material_flow.spacing(), - Geometry::deg2rad(double(m_object_config->support_material_angle))); + Geometry::deg2rad(m_object_config->support_material_angle)); tbb::task_group task_group_inner; // 1) Cache the slice of a support volume. The support volume is expanded by 1/2 of support material flow spacing // to allow a placement of suppot zig-zag snake along the grid lines. @@ -2472,7 +2472,7 @@ void PrintObjectSupportMaterial::generate_toolpaths( loop_interface_processor.n_contact_loops = this->has_contact_loops() ? 1 : 0; float base_angle = Geometry::deg2rad(float(m_object_config->support_material_angle)); - float interface_angle = Geometry::deg2rad(float(m_object_config->support_material_angle + 90)); + float interface_angle = Geometry::deg2rad(float(m_object_config->support_material_angle + 90.)); coordf_t interface_spacing = m_object_config->support_material_interface_spacing.value + m_support_material_interface_flow.spacing(); coordf_t interface_density = std::min(1., m_support_material_interface_flow.spacing() / interface_spacing); coordf_t support_spacing = m_object_config->support_material_spacing.value + m_support_material_flow.spacing(); @@ -2763,7 +2763,7 @@ void PrintObjectSupportMaterial::generate_toolpaths( if (base_layer.layer->bottom_z < EPSILON) { // Base flange (the 1st layer). filler = filler_interface.get(); - filler->angle = Geometry::deg2rad(float(m_object_config->support_material_angle + 90)); + filler->angle = Geometry::deg2rad(float(m_object_config->support_material_angle + 90.)); density = 0.5f; flow = m_first_layer_flow; // use the proper spacing for first layer as we don't need to align |