diff options
Diffstat (limited to 'ArduinoAddons/Arduino_1.0.x/hardware/OMC_tkj/variants/sanguino/pins_arduino.h')
| -rwxr-xr-x | ArduinoAddons/Arduino_1.0.x/hardware/OMC_tkj/variants/sanguino/pins_arduino.h | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.0.x/hardware/OMC_tkj/variants/sanguino/pins_arduino.h b/ArduinoAddons/Arduino_1.0.x/hardware/OMC_tkj/variants/sanguino/pins_arduino.h new file mode 100755 index 000000000..f4298d868 --- /dev/null +++ b/ArduinoAddons/Arduino_1.0.x/hardware/OMC_tkj/variants/sanguino/pins_arduino.h @@ -0,0 +1,269 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ + + Changelog + ----------- + 11/25/11 - ryan@ryanmsutton.com - Add pins for Sanguino 644P and 1284P + 07/15/12 - ryan@ryanmsutton.com - Updated for arduino0101 + + Improvements by Kristian Lauszus, kristianl@tkjelectronics.dk +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include <avr/pgmspace.h> + +const static uint8_t SS = 4; +const static uint8_t MOSI = 5; +const static uint8_t MISO = 6; +const static uint8_t SCK = 7; + +static const uint8_t SDA = 17; +static const uint8_t SCL = 16; + +#define LED_BUILTIN 0 + +static const uint8_t A0 = 31; +static const uint8_t A1 = 30; +static const uint8_t A2 = 29; +static const uint8_t A3 = 28; +static const uint8_t A4 = 27; +static const uint8_t A5 = 26; +static const uint8_t A6 = 25; +static const uint8_t A7 = 24; + +// ATMEL ATMEGA644/ATMEGA1284 / SANGUINO +// +// +---\/---+ +// (D 0) PB0 1| |40 PA0 (AI 0 / D31) +// (D 1) PB1 2| |39 PA1 (AI 1 / D30) +// INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +// PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +// SS PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +// MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +// MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +// SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +// RST 9| |32 AREF +// VCC 10| |31 GND +// GND 11| |30 AVCC +// XTAL2 12| |29 PC7 (D 23) +// XTAL1 13| |28 PC6 (D 22) +// RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +// TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +// INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +// INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +// PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +// PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +// PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +// +--------+ +// +#define NUM_DIGITAL_PINS 24 +#define NUM_ANALOG_INPUTS 8 + +#define analogInputToDigitalPin(p) ((p < 8) ? 31 - (p): -1) +#define analogPinToChannel(p) ((p < 8) ? (p) : 31 - (p)) + +#define digitalPinHasPWM(p) ((p) == 3 || (p) == 4 || (p) == 12 || (p) == 13 || (p) == 14 || (p) == 15 ) + +#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) ) + +#define digitalPinToPCICRbit(p) ( (((p) >= 24) && ((p) <= 31)) ? 0 : \ + ( (((p) >= 0) && ((p) <= 7)) ? 1 : \ + ( (((p) >= 16) && ((p) <= 23)) ? 2 : \ + ( (((p) >= 8) && ((p) <= 15)) ? 3 : \ + 0 ) ) ) ) + +#define digitalPinToPCMSK(p) ( (((p) >= 24) && ((p) <= 31)) ? (&PCMSK0) : \ + ( (((p) >= 0) && ((p) <= 7)) ? (&PCMSK1) : \ + ( (((p) >= 16) && ((p) <= 23)) ? (&PCMSK2) : \ + ( (((p) >= 8) && ((p) <= 15)) ? (&PCMSK3) : \ + ((uint8_t *)0) ) ) ) ) + + +#define digitalPinToPCMSKbit(p) ( (((p) >= 24) && ((p) <= 31)) ? (31 - (p)) : \ + ( (((p) >= 0) && ((p) <= 7)) ? (p) : \ + ( (((p) >= 16) && ((p) <= 23)) ? ((p) - 16) : \ + ( (((p) >= 8) && ((p) <= 15)) ? ((p) - 8) : \ + 0 ) ) ) ) + +#define digitalPinToInterrupt(p) ((p) == 10 ? 0 : ((p) == 11 ? 1 : ((p) == 2 ? 2 : NOT_AN_INTERRUPT))) + +#ifdef ARDUINO_MAIN +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = +{ + NOT_A_PORT, + (uint16_t) &DDRA, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = +{ + NOT_A_PORT, + (uint16_t) &PORTA, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, +}; +const uint16_t PROGMEM port_to_input_PGM[] = +{ + NOT_A_PORT, + (uint16_t) &PINA, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, +}; +const uint8_t PROGMEM digital_pin_to_port_PGM[] = +{ + PB, /* 0 */ + PB, + PB, + PB, + PB, + PB, + PB, + PB, + PD, /* 8 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PC, /* 16 */ + PC, + PC, + PC, + PC, + PC, + PC, + PC, + PA, /* 24 */ + PA, + PA, + PA, + PA, + PA, + PA, + PA /* 31 */ +}; +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = +{ + _BV(0), /* 0, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 16, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(7), /* 24, port A */ + _BV(6), + _BV(5), + _BV(4), + _BV(3), + _BV(2), + _BV(1), + _BV(0) +}; +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = +{ + NOT_ON_TIMER, /* 0 - PB0 */ + NOT_ON_TIMER, /* 1 - PB1 */ + NOT_ON_TIMER, /* 2 - PB2 */ + TIMER0A, /* 3 - PB3 */ + TIMER0B, /* 4 - PB4 */ + NOT_ON_TIMER, /* 5 - PB5 */ + NOT_ON_TIMER, /* 6 - PB6 */ + NOT_ON_TIMER, /* 7 - PB7 */ + NOT_ON_TIMER, /* 8 - PD0 */ + NOT_ON_TIMER, /* 9 - PD1 */ + NOT_ON_TIMER, /* 10 - PD2 */ + NOT_ON_TIMER, /* 11 - PD3 */ + TIMER1B, /* 12 - PD4 */ + TIMER1A, /* 13 - PD5 */ + TIMER2B, /* 14 - PD6 */ + TIMER2A, /* 15 - PD7 */ + NOT_ON_TIMER, /* 16 - PC0 */ + NOT_ON_TIMER, /* 17 - PC1 */ + NOT_ON_TIMER, /* 18 - PC2 */ + NOT_ON_TIMER, /* 19 - PC3 */ + NOT_ON_TIMER, /* 20 - PC4 */ + NOT_ON_TIMER, /* 21 - PC5 */ + NOT_ON_TIMER, /* 22 - PC6 */ + NOT_ON_TIMER, /* 23 - PC7 */ + NOT_ON_TIMER, /* 24 - PA0 */ + NOT_ON_TIMER, /* 25 - PA1 */ + NOT_ON_TIMER, /* 26 - PA2 */ + NOT_ON_TIMER, /* 27 - PA3 */ + NOT_ON_TIMER, /* 28 - PA4 */ + NOT_ON_TIMER, /* 29 - PA5 */ + NOT_ON_TIMER, /* 30 - PA6 */ + NOT_ON_TIMER /* 31 - PA7 */ +}; +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. + +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial +#define SERIAL_PORT_HARDWARE1 Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif |