Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/prusa3d/PrusaSlicer.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'ArduinoAddons/Arduino_1.0.x/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c')
-rwxr-xr-xArduinoAddons/Arduino_1.0.x/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c107
1 files changed, 107 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.0.x/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c b/ArduinoAddons/Arduino_1.0.x/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c
new file mode 100755
index 000000000..a8552cb40
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.0.x/libraries/U8glib/utility/u8g_dev_sbn1661_122x32.c
@@ -0,0 +1,107 @@
+/*
+
+ u8g_dev_sbn1661_122x32.c
+
+ WG12232 display with 2xSBN1661 / SED1520 controller (122x32 display)
+ At the moment only available in the Arduino Environment
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+*/
+
+#include "u8g.h"
+
+#define WIDTH 122
+#define HEIGHT 32
+#define PAGE_HEIGHT 8
+
+
+static const uint8_t u8g_dev_sbn1661_122x32_init_seq[] PROGMEM = {
+ U8G_ESC_CS(0), /* disable chip */
+ U8G_ESC_ADR(0), /* instruction mode */
+ U8G_ESC_RST(15), /* do reset low pulse with (15*16)+2 milliseconds */
+ U8G_ESC_CS(1), /* enable chip 1 */
+ 0x0af, /* display on */
+ 0x0c0, /* display start at line 0 */
+ 0x0a0, /* a0: ADC forward, a1: ADC reverse */
+ 0x0a9, /* a8: 1/16, a9: 1/32 duty */
+ U8G_ESC_CS(2), /* enable chip 2 */
+ 0x0af, /* display on */
+ 0x0c0, /* display start at line 0 */
+ 0x0a0, /* a0: ADC forward, a1: ADC reverse */
+ 0x0a9, /* a8: 1/16, a9: 1/32 duty */
+
+ U8G_ESC_CS(0), /* disable chip */
+
+
+ U8G_ESC_END /* end of sequence */
+};
+
+uint8_t u8g_dev_sbn1661_122x32_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
+{
+ switch(msg)
+ {
+ case U8G_DEV_MSG_INIT:
+ u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_NONE);
+ u8g_WriteEscSeqP(u8g, dev, u8g_dev_sbn1661_122x32_init_seq);
+ break;
+ case U8G_DEV_MSG_STOP:
+ break;
+ case U8G_DEV_MSG_PAGE_NEXT:
+ {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+
+ u8g_SetAddress(u8g, dev, 0); /* command mode */
+ u8g_SetChipSelect(u8g, dev, 1);
+ u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */
+ u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, WIDTH/2, pb->buf);
+
+ u8g_SetAddress(u8g, dev, 0); /* command mode */
+ u8g_SetChipSelect(u8g, dev, 2);
+ u8g_WriteByte(u8g, dev, 0x0b8 | pb->p.page); /* select current page (SBN1661/SED1520) */
+ u8g_WriteByte(u8g, dev, 0x000 ); /* set X address */
+ u8g_SetAddress(u8g, dev, 1); /* data mode */
+ u8g_WriteSequence(u8g, dev, WIDTH/2, WIDTH/2+(uint8_t *)pb->buf);
+
+ u8g_SetChipSelect(u8g, dev, 0);
+
+ }
+ break;
+ case U8G_DEV_MSG_CONTRAST:
+ break;
+ }
+ return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+/* u8g_com_arduino_sw_spi_fn does not work, too fast??? */
+U8G_PB_DEV(u8g_dev_sbn1661_122x32 , WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_sbn1661_122x32_fn, u8g_com_arduino_no_en_parallel_fn);