diff options
Diffstat (limited to 'ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.pde')
| -rwxr-xr-x | ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.pde | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.pde b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.pde new file mode 100755 index 000000000..fbb0af034 --- /dev/null +++ b/ArduinoAddons/Arduino_1.5.x/hardware/marlin/avr/libraries/U8glib/examples/Menu/Menu.pde @@ -0,0 +1,234 @@ +/* + + Menu.pde + + Simple Menu Selection + + >>> Before compiling: Please remove comment from the constructor of the + >>> connected graphics display (see below). + + Universal 8bit Graphics Library, http://code.google.com/p/u8glib/ + + Copyright (c) 2012, olikraus@gmail.com + All rights reserved. + + Redistribution and use in source and binary forms, with or without modification, + are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, this list + of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or other + materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF + ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +*/ + + +#include "U8glib.h" + +// setup u8g object, please remove comment from one of the following constructor calls +// IMPORTANT NOTE: The complete list of supported devices is here: http://code.google.com/p/u8glib/wiki/device + +//U8GLIB_NHD27OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD27OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD27OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD27OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD31OLED_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD31OLED_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD31OLED_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_NHD31OLED_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGS102 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGM132 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGM128 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_ST7920_128X64_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16 +//U8GLIB_ST7920_128X64_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16 +//U8GLIB_ST7920_128X64_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17 +//U8GLIB_ST7920_128X64_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17 +//U8GLIB_ST7920_192X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16 +//U8GLIB_ST7920_192X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16 +//U8GLIB_ST7920_192X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17 +//U8GLIB_ST7920_192X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17 +//U8GLIB_ST7920_192X32_1X u8g(13, 11, 10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10 +//U8GLIB_ST7920_192X32_4X u8g(10); // SPI Com: SCK = en = 13, MOSI = rw = 11, CS = di = 10, HW SPI +//U8GLIB_ST7920_202X32_1X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16 +//U8GLIB_ST7920_202X32_4X u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, di=17,rw=16 +//U8GLIB_ST7920_202X32_1X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17 +//U8GLIB_ST7920_202X32_4X u8g(18, 16, 17); // SPI Com: SCK = en = 18, MOSI = rw = 16, CS = di = 17 +//U8GLIB_LM6059 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_LM6063 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGXL160_BW u8g(10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGXL160_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGXL160_2X_BW u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_DOGXL160_2X_GR u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_PCD8544 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8 +//U8GLIB_PCF8812 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, Reset = 8 +//U8GLIB_KS0108_128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs1=14, cs2=15,di=17,rw=16 +//U8GLIB_LC7981_160X80 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16 +//U8GLIB_LC7981_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16 +//U8GLIB_LC7981_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 18, 14, 15, 17, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 en=18, cs=14 ,di=15,rw=17, reset = 16 +//U8GLIB_ILI9325D_320x240 u8g(18,17,19,U8G_PIN_NONE,16 ); // 8Bit Com: D0..D7: 0,1,2,3,4,5,6,7 en=wr=18, cs=17, rs=19, rd=U8G_PIN_NONE, reset = 16 +//U8GLIB_SBN1661_122X32 u8g(8,9,10,11,4,5,6,7,14,15, 17, U8G_PIN_NONE, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7 cs1=14, cs2=15,di=17,rw=16,reset = 16 +//U8GLIB_SSD1306_128X64 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_SSD1306_128X64 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11) +//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11) +//U8GLIB_SSD1306_128X32 u8g(13, 11, 10, 9); // SW SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_SSD1306_128X32 u8g(10, 9); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11) +//U8GLIB_SSD1306_128X32 u8g(U8G_I2C_OPT_NONE); // HW SPI Com: CS = 10, A0 = 9 (Hardware Pins are SCK = 13 and MOSI = 11) +//U8GLIB_SSD1309_128X64 u8g(13, 11, 10, 9); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9 +//U8GLIB_SSD1327_96X96_GR u8g(U8G_I2C_OPT_NONE); // I2C +//U8GLIB_SSD1327_96X96_2X_GR u8g(U8G_I2C_OPT_NONE); // I2C +//U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8 +//U8GLIB_NHD_C12832 u8g(13, 11, 10, 9, 8); // SPI Com: SCK = 13, MOSI = 11, CS = 10, A0 = 9, RST = 8 +//U8GLIB_T6963_240X128 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16 +//U8GLIB_T6963_240X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16 +//U8GLIB_T6963_128X64 u8g(8, 9, 10, 11, 4, 5, 6, 7, 14, 15, 17, 18, 16); // 8Bit Com: D0..D7: 8,9,10,11,4,5,6,7, cs=14, a0=15, wr=17, rd=18, reset=16 + + +#define KEY_NONE 0 +#define KEY_PREV 1 +#define KEY_NEXT 2 +#define KEY_SELECT 3 +#define KEY_BACK 4 + +// DOGS102 shield configuration values +//uint8_t uiKeyPrev = 2; +//uint8_t uiKeyNext = 4; +//uint8_t uiKeySelect = 5; +//uint8_t uiKeyBack = 3; + +// DOGM128-Shield configuration values +// DOGXL60-Shield configuration values +uint8_t uiKeyPrev = 7; +uint8_t uiKeyNext = 3; +uint8_t uiKeySelect = 2; +uint8_t uiKeyBack = 8; + +uint8_t uiKeyCodeFirst = KEY_NONE; +uint8_t uiKeyCodeSecond = KEY_NONE; +uint8_t uiKeyCode = KEY_NONE; + + +void uiSetup(void) { + // configure input keys + + pinMode(uiKeyPrev, INPUT); // set pin to input + digitalWrite(uiKeyPrev, HIGH); // turn on pullup resistors + pinMode(uiKeyNext, INPUT); // set pin to input + digitalWrite(uiKeyNext, HIGH); // turn on pullup resistors + pinMode(uiKeySelect, INPUT); // set pin to input + digitalWrite(uiKeySelect, HIGH); // turn on pullup resistors + pinMode(uiKeyBack, INPUT); // set pin to input + digitalWrite(uiKeyBack, HIGH); // turn on pullup resistors +} + +void uiStep(void) { + uiKeyCodeSecond = uiKeyCodeFirst; + if ( digitalRead(uiKeyPrev) == LOW ) + uiKeyCodeFirst = KEY_PREV; + else if ( digitalRead(uiKeyNext) == LOW ) + uiKeyCodeFirst = KEY_NEXT; + else if ( digitalRead(uiKeySelect) == LOW ) + uiKeyCodeFirst = KEY_SELECT; + else if ( digitalRead(uiKeyBack) == LOW ) + uiKeyCodeFirst = KEY_BACK; + else + uiKeyCodeFirst = KEY_NONE; + + if ( uiKeyCodeSecond == uiKeyCodeFirst ) + uiKeyCode = uiKeyCodeFirst; + else + uiKeyCode = KEY_NONE; +} + + +#define MENU_ITEMS 4 +char *menu_strings[MENU_ITEMS] = { "First Line", "Second Item", "3333333", "abcdefg" }; + +uint8_t menu_current = 0; +uint8_t menu_redraw_required = 0; +uint8_t last_key_code = KEY_NONE; + + +void drawMenu(void) { + uint8_t i, h; + u8g_uint_t w, d; + + u8g.setFont(u8g_font_6x13); + u8g.setFontRefHeightText(); + u8g.setFontPosTop(); + + h = u8g.getFontAscent()-u8g.getFontDescent(); + w = u8g.getWidth(); + for( i = 0; i < MENU_ITEMS; i++ ) { + d = (w-u8g.getStrWidth(menu_strings[i]))/2; + u8g.setDefaultForegroundColor(); + if ( i == menu_current ) { + u8g.drawBox(0, i*h+1, w, h); + u8g.setDefaultBackgroundColor(); + } + u8g.drawStr(d, i*h, menu_strings[i]); + } +} + +void updateMenu(void) { + if ( uiKeyCode != KEY_NONE && last_key_code == uiKeyCode ) { + return; + } + last_key_code = uiKeyCode; + + switch ( uiKeyCode ) { + case KEY_NEXT: + menu_current++; + if ( menu_current >= MENU_ITEMS ) + menu_current = 0; + menu_redraw_required = 1; + break; + case KEY_PREV: + if ( menu_current == 0 ) + menu_current = MENU_ITEMS; + menu_current--; + menu_redraw_required = 1; + break; + } +} + + +void setup() { + // rotate screen, if required + // u8g.setRot180(); + + uiSetup(); // setup key detection and debounce algorithm + menu_redraw_required = 1; // force initial redraw +} + +void loop() { + + uiStep(); // check for key press + + if ( menu_redraw_required != 0 ) { + u8g.firstPage(); + do { + drawMenu(); + } while( u8g.nextPage() ); + menu_redraw_required = 0; + } + + updateMenu(); // update menu bar + +} |