1 files changed, 79 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/cores/arduino/HardwareSerial0.cpp b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/cores/arduino/HardwareSerial0.cpp
new file mode 100755
index 000000000..1146eebab
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/cores/arduino/HardwareSerial0.cpp
@@ -0,0 +1,79 @@
+/*
+  HardwareSerial0.cpp - Hardware serial library for Wiring
+  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+  Modified 23 November 2006 by David A. Mellis
+  Modified 28 September 2010 by Mark Sproul
+  Modified 14 August 2012 by Alarus
+  Modified 3 December 2013 by Matthijs Kooijman
+*/
+
+#include "Arduino.h"
+#include "HardwareSerial.h"
+#include "HardwareSerial_private.h"
+
+// Each HardwareSerial is defined in its own file, sine the linker pulls
+// in the entire file when any element inside is used. --gc-sections can
+// additionally cause unused symbols to be dropped, but ISRs have the
+// "used" attribute so are never dropped and they keep the
+// HardwareSerial instance in as well. Putting each instance in its own
+// file prevents the linker from pulling in any unused instances in the
+// first place.
+
+#if defined(HAVE_HWSERIAL0)
+
+#if defined(USART_RX_vect)
+  ISR(USART_RX_vect)
+#elif defined(USART0_RX_vect)
+  ISR(USART0_RX_vect)
+#elif defined(USART_RXC_vect)
+  ISR(USART_RXC_vect) // ATmega8
+#else
+  #error "Don't know what the Data Received vector is called for Serial"
+#endif
+  {
+    Serial._rx_complete_irq();
+  }
+
+#if defined(UART0_UDRE_vect)
+ISR(UART0_UDRE_vect)
+#elif defined(UART_UDRE_vect)
+ISR(UART_UDRE_vect)
+#elif defined(USART0_UDRE_vect)
+ISR(USART0_UDRE_vect)
+#elif defined(USART_UDRE_vect)
+ISR(USART_UDRE_vect)
+#else
+  #error "Don't know what the Data Register Empty vector is called for Serial"
+#endif
+{
+  Serial._tx_udr_empty_irq();
+}
+
+#if defined(UBRRH) && defined(UBRRL)
+  HardwareSerial Serial(&UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR);
+#else
+  HardwareSerial Serial(&UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0);
+#endif
+
+// Function that can be weakly referenced by serialEventRun to prevent
+// pulling in this file if it's not otherwise used.
+bool Serial0_available() {
+  return Serial.available();
+}
+
+#endif // HAVE_HWSERIAL0