1 files changed, 61 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/LiquidCrystal/examples/Cursor/Cursor.ino b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/LiquidCrystal/examples/Cursor/Cursor.ino
new file mode 100755
index 000000000..5f68d917d
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/LiquidCrystal/examples/Cursor/Cursor.ino
@@ -0,0 +1,61 @@
+/*
+  LiquidCrystal Library - Cursor
+
+ Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+ library works with all LCD displays that are compatible with the
+ Hitachi HD44780 driver. There are many of them out there, and you
+ can usually tell them by the 16-pin interface.
+
+ This sketch prints "Hello World!" to the LCD and
+ uses the cursor()  and noCursor() methods to turn
+ on and off the cursor.
+
+ The circuit:
+ * LCD RS pin to digital pin 12
+ * LCD Enable pin to digital pin 11
+ * LCD D4 pin to digital pin 5
+ * LCD D5 pin to digital pin 4
+ * LCD D6 pin to digital pin 3
+ * LCD D7 pin to digital pin 2
+ * LCD R/W pin to ground
+ * 10K resistor:
+ * ends to +5V and ground
+ * wiper to LCD VO pin (pin 3)
+
+ Library originally added 18 Apr 2008
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe
+ modified 22 Nov 2010
+ by Tom Igoe
+
+ This example code is in the public domain.
+
+ http://arduino.cc/en/Tutorial/LiquidCrystalCursor
+
+ */
+
+// include the library code:
+#include <LiquidCrystal.h>
+
+// initialize the library with the numbers of the interface pins
+LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
+
+void setup() {
+  // set up the LCD's number of columns and rows:
+  lcd.begin(16, 2);
+  // Print a message to the LCD.
+  lcd.print("hello, world!");
+}
+
+void loop() {
+  // Turn off the cursor:
+  lcd.noCursor();
+  delay(500);
+  // Turn on the cursor:
+  lcd.cursor();
+  delay(500);
+}
+