Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/prusa3d/PrusaSlicer.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
path: root/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c')
-rwxr-xr-xArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c438
1 files changed, 438 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c
new file mode 100755
index 000000000..3c0d34a48
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_spi.c
@@ -0,0 +1,438 @@
+/*
+
+ u8g_com_arduino_hw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ SPI Clock Cycle Type
+
+ SSD1351 50ns 20 MHz
+ SSD1322 300ns 3.3 MHz
+ SSD1327 300ns
+ SSD1306 300ns
+ ST7565 400ns 2.5 MHz
+ ST7920 400ns
+
+ Arduino DUE
+
+ PA25 MISO
+ PA26 MOSI 75
+ PA27 SCLK 76
+
+
+typedef struct {
+ WoReg SPI_CR; (Spi Offset: 0x00) Control Register
+ RwReg SPI_MR; (Spi Offset: 0x04) Mode Register
+ RoReg SPI_RDR; (Spi Offset: 0x08) Receive Data Register
+ WoReg SPI_TDR; (Spi Offset: 0x0C) Transmit Data Register
+ RoReg SPI_SR; (Spi Offset: 0x10) Status Register
+ WoReg SPI_IER; (Spi Offset: 0x14) Interrupt Enable Register
+ WoReg SPI_IDR; (Spi Offset: 0x18) Interrupt Disable Register
+ RoReg SPI_IMR; (Spi Offset: 0x1C) Interrupt Mask Register
+ RoReg Reserved1[4];
+ RwReg SPI_CSR[4]; (Spi Offset: 0x30) Chip Select Register
+ RoReg Reserved2[41];
+ RwReg SPI_WPMR; (Spi Offset: 0xE4) Write Protection Control Register
+ RoReg SPI_WPSR; (Spi Offset: 0xE8) Write Protection Status Register
+} Spi;
+
+ Power Management Controller (PMC)
+ arduino-1.5.2/hardware/arduino/sam/system/CMSIS/Device/ATMEL/sam3xa/include/instance/instance_pmc.h
+ - enable PIO
+
+ REG_PMC_PCER0 = 1UL << ID_PIOA
+ - enable SPI
+ REG_PMC_PCER0 = 1UL << ID_SPI0
+
+
+ - enable PIOA and SPI0
+ REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
+
+ Parallel Input/Output Controller (PIO)
+ arduino-1.5.2/hardware/arduino/sam/system/CMSIS/Device/ATMEL/sam3xa/include/instance/instance_pioa.h
+ - enable special function of the pin: disable PIO on A26 and A27:
+ REG_PIOA_PDR = 0x0c000000
+ PIOA->PIO_PDR = 0x0c000000
+
+ SPI
+ SPI0->SPI_CR = SPI_CR_SPIDIS
+ SPI0->SPI_CR = SPI_CR_SWRST ;
+ SPI0->SPI_CR = SPI_CR_SWRST ;
+ SPI0->SPI_CR = SPI_CR_SPIEN
+
+ Bit 0: Master Mode = 1 (active)
+ Bit 1: Peripheral Select = 0 (fixed)
+ Bit 2: Chip Select Decode Mode = 1 (4 to 16)
+ Bit 4: Mode Fault Detection = 1 (disabled)
+ Bit 5: Wait Data Read = 0 (disabled)
+ Bit 7: Loop Back Mode = 0 (disabled)
+ Bit 16-19: Peripheral Chip Select = 0 (chip select 0)
+ SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS
+
+ Bit 0: Clock Polarity = 0
+ Bit 1: Clock Phase = 0
+ Bit 4-7: Bits = 0 (8 Bit)
+ Bit 8-15: SCBR = 1
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(x) Serial Baud Rate
+ SCBR / 84000000 > 50 / 1000000000
+ SCBR / 84 > 5 / 100
+ SCBR > 50 *84 / 1000 --> SCBR=5
+ SCBR > 300*84 / 1000 --> SCBR=26
+ SCBR > 400*84 / 1000 --> SCBR=34
+
+ Arduino Due test code:
+ REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
+ REG_PIOA_PDR = 0x0c000000;
+ SPI0->SPI_CR = SPI_CR_SPIDIS;
+ SPI0->SPI_CR = SPI_CR_SWRST;
+ SPI0->SPI_CR = SPI_CR_SWRST;
+ SPI0->SPI_CR = SPI_CR_SPIEN;
+ SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS;
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(30);
+
+ for(;;)
+ {
+ while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 )
+ ;
+ SPI0->SPI_TDR = 0x050;
+ }
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if defined(__AVR__)
+#define U8G_ARDUINO_ATMEGA_HW_SPI
+/* remove the definition for attiny */
+#if __AVR_ARCH__ == 2
+#undef U8G_ARDUINO_ATMEGA_HW_SPI
+#endif
+#if __AVR_ARCH__ == 25
+#undef U8G_ARDUINO_ATMEGA_HW_SPI
+#endif
+#endif
+
+#if defined(U8G_ARDUINO_ATMEGA_HW_SPI)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#if ARDUINO < 100
+#include <WProgram.h>
+
+/* fixed pins */
+#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) // Sanguino.cc board
+#define PIN_SCK 7
+#define PIN_MISO 6
+#define PIN_MOSI 5
+#define PIN_CS 4
+#else // Arduino Board
+#define PIN_SCK 13
+#define PIN_MISO 12
+#define PIN_MOSI 11
+#define PIN_CS 10
+#endif // (__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
+
+#else
+
+#include <Arduino.h>
+
+/* use Arduino pin definitions */
+#define PIN_SCK SCK
+#define PIN_MISO MISO
+#define PIN_MOSI MOSI
+#define PIN_CS SS
+
+#endif
+
+
+
+//static uint8_t u8g_spi_out(uint8_t data) U8G_NOINLINE;
+static uint8_t u8g_spi_out(uint8_t data)
+{
+ /* unsigned char x = 100; */
+ /* send data */
+ SPDR = data;
+ /* wait for transmission */
+ while (!(SPSR & (1<<SPIF)))
+ ;
+ /* clear the SPIF flag by reading SPDR */
+ return SPDR;
+}
+
+
+uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ switch(msg)
+ {
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_INIT:
+ u8g_com_arduino_assign_pin_output_high(u8g);
+ pinMode(PIN_SCK, OUTPUT);
+ digitalWrite(PIN_SCK, LOW);
+ pinMode(PIN_MOSI, OUTPUT);
+ digitalWrite(PIN_MOSI, LOW);
+ /* pinMode(PIN_MISO, INPUT); */
+
+ pinMode(PIN_CS, OUTPUT); /* system chip select for the atmega board */
+ digitalWrite(PIN_CS, HIGH);
+
+
+
+ /*
+ SPR1 SPR0
+ 0 0 fclk/4
+ 0 1 fclk/16
+ 1 0 fclk/64
+ 1 1 fclk/128
+ */
+ SPCR = 0;
+ SPCR = (1<<SPE) | (1<<MSTR)|(0<<SPR1)|(0<<SPR0)|(0<<CPOL)|(0<<CPHA);
+#ifdef U8G_HW_SPI_2X
+ SPSR = (1 << SPI2X); /* double speed, issue 89 */
+#else
+ if ( arg_val <= U8G_SPI_CLK_CYCLE_50NS )
+ {
+ SPSR = (1 << SPI2X); /* double speed, issue 89 */
+ }
+#endif
+
+
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ if ( arg_val == 0 )
+ {
+ /* disable */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+ }
+ else
+ {
+ /* enable */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+ }
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+ u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_spi_out(arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_spi_out(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_spi_out(u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+}
+
+/* #elif defined(__18CXX) || defined(__PIC32MX) */
+
+#elif defined(__SAM3X8E__) // Arduino Due, maybe we should better check for __SAM3X8E__
+
+#include <Arduino.h>
+
+/* use Arduino pin definitions */
+#define PIN_SCK SCK
+#define PIN_MISO MISO
+#define PIN_MOSI MOSI
+#define PIN_CS SS
+
+
+static uint8_t u8g_spi_out(uint8_t data)
+{
+ /* wait until tx register is empty */
+ while( (SPI0->SPI_SR & SPI_SR_TDRE) == 0 )
+ ;
+ /* send data */
+ SPI0->SPI_TDR = (uint32_t)data;
+ return data;
+}
+
+
+uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ switch(msg)
+ {
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_INIT:
+ u8g_com_arduino_assign_pin_output_high(u8g);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+
+ /* Arduino Due specific code */
+
+ /* enable PIOA and SPI0 */
+ REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0);
+
+ /* disable PIO on A26 and A27 */
+ REG_PIOA_PDR = 0x0c000000;
+
+ /* reset SPI0 (from sam lib) */
+ SPI0->SPI_CR = SPI_CR_SPIDIS;
+ SPI0->SPI_CR = SPI_CR_SWRST;
+ SPI0->SPI_CR = SPI_CR_SWRST;
+ SPI0->SPI_CR = SPI_CR_SPIEN;
+ u8g_MicroDelay();
+
+ /* master mode, no fault detection, chip select 0 */
+ SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PCSDEC | SPI_MR_MODFDIS;
+
+ /* Polarity, Phase, 8 Bit data transfer, baud rate */
+ /* x * 1000 / 84 --> clock cycle in ns
+ 5 * 1000 / 84 = 58 ns
+ SCBR > 50 *84 / 1000 --> SCBR=5
+ SCBR > 300*84 / 1000 --> SCBR=26
+ SCBR > 400*84 / 1000 --> SCBR=34
+ */
+
+ if ( arg_val <= U8G_SPI_CLK_CYCLE_50NS )
+ {
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(5) | 1;
+ }
+ else if ( arg_val <= U8G_SPI_CLK_CYCLE_300NS )
+ {
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(26) | 1;
+ }
+ else if ( arg_val <= U8G_SPI_CLK_CYCLE_400NS )
+ {
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(34) | 1;
+ }
+ else
+ {
+ SPI0->SPI_CSR[0] = SPI_CSR_SCBR(84) | 1;
+ }
+
+ u8g_MicroDelay();
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+ u8g_MicroDelay();
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ if ( arg_val == 0 )
+ {
+ /* disable */
+ u8g_MicroDelay(); /* this delay is required to avoid that the display is switched off too early --> DOGS102 with DUE */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+ u8g_MicroDelay();
+ }
+ else
+ {
+ /* enable */
+ //u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+ u8g_MicroDelay();
+ }
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+ u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_spi_out(arg_val);
+ u8g_MicroDelay();
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_spi_out(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_spi_out(u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+}
+
+
+
+#else /* U8G_ARDUINO_ATMEGA_HW_SPI */
+
+#endif /* U8G_ARDUINO_ATMEGA_HW_SPI */
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ return 1;
+}
+
+#endif /* ARDUINO */
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-11 21:54:56 +0300