Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/prusa3d/PrusaSlicer.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_usart_spi.c')
-rwxr-xr-xArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_usart_spi.c159
1 files changed, 159 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_usart_spi.c b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_usart_spi.c
new file mode 100755
index 000000000..27fd8d01c
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_hw_usart_spi.c
@@ -0,0 +1,159 @@
+/*
+
+ u8g_com_arduino_hw_usart_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ SPI Clock Cycle Type
+
+ SSD1351 50ns 20 MHz
+ SSD1322 300ns 3.3 MHz
+ SSD1327 300ns
+ SSD1306 300ns
+ ST7565 400ns 2.5 MHz
+ ST7920 400ns
+
+*/
+
+#include "u8g.h"
+
+#if defined(ARDUINO)
+
+#if defined(__AVR_ATmega32U4__ )
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#if ARDUINO < 100
+#include <WProgram.h>
+#else
+#include <Arduino.h>
+#endif
+
+
+
+static uint8_t u8g_usart_spi_out(uint8_t data)
+{
+ /* send data */
+ UDR1 = data;
+ /* wait for empty transmit buffer */
+ while(!(UCSR1A & (1 << UDRE1)));
+
+ return UDR1;
+}
+
+
+uint8_t u8g_com_arduino_hw_usart_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ switch(msg)
+ {
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_INIT:
+ /* SCK is already an output as we overwrite TXLED */
+ u8g_com_arduino_assign_pin_output_high(u8g);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+
+ // Init interface at 2MHz
+ UBRR1 = 0x00;
+ UCSR1C = (1 << UMSEL11) | (1 << UMSEL10);
+ UCSR1B = (1 << TXEN1);
+ UBRR1 = 3;
+
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ if ( arg_val == 0 )
+ {
+ /* disable */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+ }
+ else
+ {
+ /* enable */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+ }
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+ u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_usart_spi_out(arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_usart_spi_out(*ptr++);
+ arg_val--;
+ }
+ }
+ break;
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_usart_spi_out(u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+ }
+ return 1;
+}
+
+/* #elif defined(__18CXX) || defined(__PIC32MX) */
+/* #elif defined(__arm__) // Arduino Due, maybe we should better check for __SAM3X8E__ */
+
+#else /* __AVR_ATmega32U4__ */
+
+#endif /* __AVR_ATmega32U4__ */
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_hw_usart_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ return 1;
+}
+
+#endif /* ARDUINO */
+