Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/prusa3d/PrusaSlicer.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c')
-rwxr-xr-xArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c143
1 files changed, 143 insertions, 0 deletions
diff --git a/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c
new file mode 100755
index 000000000..048ac1af3
--- /dev/null
+++ b/ArduinoAddons/Arduino_1.6.x/hardware/marlin/avr/libraries/U8glib/utility/u8g_com_arduino_std_sw_spi.c
@@ -0,0 +1,143 @@
+/*
+
+ u8g_arduino_std_sw_spi.c
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#include "u8g.h"
+
+
+#if defined(ARDUINO)
+
+#if ARDUINO < 100
+#include <WProgram.h>
+#else
+#include <Arduino.h>
+#endif
+
+void u8g_arduino_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val)
+{
+ uint8_t i = 8;
+ do
+ {
+ if ( val & 128 )
+ digitalWrite(dataPin, HIGH);
+ else
+ digitalWrite(dataPin, LOW);
+ val <<= 1;
+ u8g_MicroDelay(); /* 23 Sep 2012 */
+ //delay(1);
+ digitalWrite(clockPin, HIGH);
+ u8g_MicroDelay(); /* 23 Sep 2012 */
+ //delay(1);
+ digitalWrite(clockPin, LOW);
+ u8g_MicroDelay(); /* 23 Sep 2012 */
+ //delay(1);
+ i--;
+ } while( i != 0 );
+}
+
+uint8_t u8g_com_arduino_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ switch(msg)
+ {
+ case U8G_COM_MSG_INIT:
+ u8g_com_arduino_assign_pin_output_high(u8g);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_MOSI, LOW);
+ break;
+
+ case U8G_COM_MSG_STOP:
+ break;
+
+ case U8G_COM_MSG_RESET:
+ if ( u8g->pin_list[U8G_PI_RESET] != U8G_PIN_NONE )
+ u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_CHIP_SELECT:
+ if ( arg_val == 0 )
+ {
+ /* disable */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, HIGH);
+ }
+ else
+ {
+ /* enable */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, LOW);
+ u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ_P:
+ {
+ register uint8_t *ptr = arg_ptr;
+ while( arg_val > 0 )
+ {
+ u8g_arduino_sw_spi_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
+ ptr++;
+ arg_val--;
+ }
+ }
+ break;
+
+ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ u8g_com_arduino_digital_write(u8g, U8G_PI_A0, arg_val);
+ break;
+ }
+ return 1;
+}
+
+#else /* ARDUINO */
+
+uint8_t u8g_com_arduino_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
+{
+ return 1;
+}
+
+#endif /* ARDUINO */
+