diff options
Diffstat (limited to 'Firmware/language_all.cpp')
| -rw-r--r-- | Firmware/language_all.cpp | 719 |
1 files changed, 517 insertions, 202 deletions
diff --git a/Firmware/language_all.cpp b/Firmware/language_all.cpp index 2647ace9a..0acb54c90 100644 --- a/Firmware/language_all.cpp +++ b/Firmware/language_all.cpp @@ -10,17 +10,19 @@ const char * const MSG_ACTIVE_EXTRUDER_LANG_TABLE[1] PROGMEM = { MSG_ACTIVE_EXTRUDER_EN }; -const char MSG_ADJUSTZ_EN[] PROGMEM = "Auto adjust Z ?"; +const char MSG_ADJUSTZ_EN[] PROGMEM = "Auto adjust Z?"; const char MSG_ADJUSTZ_CZ[] PROGMEM = "Auto doladit Z ?"; const char MSG_ADJUSTZ_IT[] PROGMEM = "Autoregolare Z?"; -const char MSG_ADJUSTZ_ES[] PROGMEM = "Auto Micropaso Z?"; +const char MSG_ADJUSTZ_ES[] PROGMEM = "Ajustar Eje Z"; const char MSG_ADJUSTZ_PL[] PROGMEM = "Autodostroic Z?"; +const char MSG_ADJUSTZ_DE[] PROGMEM = "Auto Z einstellen?"; const char * const MSG_ADJUSTZ_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_ADJUSTZ_EN, MSG_ADJUSTZ_CZ, MSG_ADJUSTZ_IT, MSG_ADJUSTZ_ES, - MSG_ADJUSTZ_PL + MSG_ADJUSTZ_PL, + MSG_ADJUSTZ_DE }; const char MSG_AMAX_EN[] PROGMEM = "Amax "; @@ -36,12 +38,14 @@ const char * const MSG_AUTHOR_LANG_TABLE[1] PROGMEM = { const char MSG_AUTO_HOME_EN[] PROGMEM = "Auto home"; const char MSG_AUTO_HOME_IT[] PROGMEM = "Trova origine"; const char MSG_AUTO_HOME_ES[] PROGMEM = "Llevar al origen"; +const char MSG_AUTO_HOME_DE[] PROGMEM = "Startposition"; const char * const MSG_AUTO_HOME_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_AUTO_HOME_EN, MSG_AUTO_HOME_EN, MSG_AUTO_HOME_IT, MSG_AUTO_HOME_ES, - MSG_AUTO_HOME_EN + MSG_AUTO_HOME_EN, + MSG_AUTO_HOME_DE }; const char MSG_A_RETRACT_EN[] PROGMEM = "A-retract"; @@ -77,14 +81,16 @@ const char * const MSG_BABYSTEP_Y_LANG_TABLE[1] PROGMEM = { const char MSG_BABYSTEP_Z_EN[] PROGMEM = "Live adjust Z"; const char MSG_BABYSTEP_Z_CZ[] PROGMEM = "Doladeni osy Z"; const char MSG_BABYSTEP_Z_IT[] PROGMEM = "Compensazione Z"; -const char MSG_BABYSTEP_Z_ES[] PROGMEM = "Micropaso Z"; +const char MSG_BABYSTEP_Z_ES[] PROGMEM = "Micropaso Eje Z"; const char MSG_BABYSTEP_Z_PL[] PROGMEM = "Dostrojenie osy Z"; +const char MSG_BABYSTEP_Z_DE[] PROGMEM = "Z einstellen"; const char * const MSG_BABYSTEP_Z_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BABYSTEP_Z_EN, MSG_BABYSTEP_Z_CZ, MSG_BABYSTEP_Z_IT, MSG_BABYSTEP_Z_ES, - MSG_BABYSTEP_Z_PL + MSG_BABYSTEP_Z_PL, + MSG_BABYSTEP_Z_DE }; const char MSG_BABYSTEP_Z_NOT_SET_EN[] PROGMEM = "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."; @@ -92,12 +98,14 @@ const char MSG_BABYSTEP_Z_NOT_SET_CZ[] PROGMEM = "Neni zkalibrovana vzdalenost t const char MSG_BABYSTEP_Z_NOT_SET_IT[] PROGMEM = "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration."; const char MSG_BABYSTEP_Z_NOT_SET_ES[] PROGMEM = "Distancia entre la punta de la boquilla y la superficie de la cama no fijada aun. Por favor siga el manual, capitulo First steps, seccion First layer calibration."; const char MSG_BABYSTEP_Z_NOT_SET_PL[] PROGMEM = "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy."; +const char MSG_BABYSTEP_Z_NOT_SET_DE[] PROGMEM = "Der Abstand zwischen der Spitze der Duese und der Bed ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration."; const char * const MSG_BABYSTEP_Z_NOT_SET_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BABYSTEP_Z_NOT_SET_EN, MSG_BABYSTEP_Z_NOT_SET_CZ, MSG_BABYSTEP_Z_NOT_SET_IT, MSG_BABYSTEP_Z_NOT_SET_ES, - MSG_BABYSTEP_Z_NOT_SET_PL + MSG_BABYSTEP_Z_NOT_SET_PL, + MSG_BABYSTEP_Z_NOT_SET_DE }; const char MSG_BED_EN[] PROGMEM = "Bed"; @@ -109,33 +117,38 @@ const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_EN, MSG_BED_IT, MSG_BED_ES, - MSG_BED_PL + MSG_BED_PL, + MSG_BED_EN }; const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side um"; const char MSG_BED_CORRECTION_FRONT_CZ[] PROGMEM = "Vpredu [um]"; -const char MSG_BED_CORRECTION_FRONT_IT[] PROGMEM = "Lato ateriore um"; +const char MSG_BED_CORRECTION_FRONT_IT[] PROGMEM = "Lato ateriore"; const char MSG_BED_CORRECTION_FRONT_ES[] PROGMEM = "Adelante [um]"; const char MSG_BED_CORRECTION_FRONT_PL[] PROGMEM = "Do przodu [um]"; +const char MSG_BED_CORRECTION_FRONT_DE[] PROGMEM = "Vorderseite [um]"; const char * const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_CORRECTION_FRONT_EN, MSG_BED_CORRECTION_FRONT_CZ, MSG_BED_CORRECTION_FRONT_IT, MSG_BED_CORRECTION_FRONT_ES, - MSG_BED_CORRECTION_FRONT_PL + MSG_BED_CORRECTION_FRONT_PL, + MSG_BED_CORRECTION_FRONT_DE }; const char MSG_BED_CORRECTION_LEFT_EN[] PROGMEM = "Left side um"; const char MSG_BED_CORRECTION_LEFT_CZ[] PROGMEM = "Vlevo [um]"; -const char MSG_BED_CORRECTION_LEFT_IT[] PROGMEM = "Lato sinistro um"; +const char MSG_BED_CORRECTION_LEFT_IT[] PROGMEM = "Lato sinistro"; const char MSG_BED_CORRECTION_LEFT_ES[] PROGMEM = "Izquierda [um]"; const char MSG_BED_CORRECTION_LEFT_PL[] PROGMEM = "W lewo [um]"; +const char MSG_BED_CORRECTION_LEFT_DE[] PROGMEM = "Linke Seite [um]"; const char * const MSG_BED_CORRECTION_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_CORRECTION_LEFT_EN, MSG_BED_CORRECTION_LEFT_CZ, MSG_BED_CORRECTION_LEFT_IT, MSG_BED_CORRECTION_LEFT_ES, - MSG_BED_CORRECTION_LEFT_PL + MSG_BED_CORRECTION_LEFT_PL, + MSG_BED_CORRECTION_LEFT_DE }; const char MSG_BED_CORRECTION_MENU_EN[] PROGMEM = "Bed level correct"; @@ -143,12 +156,14 @@ const char MSG_BED_CORRECTION_MENU_CZ[] PROGMEM = "Korekce podlozky"; const char MSG_BED_CORRECTION_MENU_IT[] PROGMEM = "Correz. liv.letto"; const char MSG_BED_CORRECTION_MENU_ES[] PROGMEM = "Corr. de la cama"; const char MSG_BED_CORRECTION_MENU_PL[] PROGMEM = "Korekta podkladki"; +const char MSG_BED_CORRECTION_MENU_DE[] PROGMEM = "Bed level Korrekt"; const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_CORRECTION_MENU_EN, MSG_BED_CORRECTION_MENU_CZ, MSG_BED_CORRECTION_MENU_IT, MSG_BED_CORRECTION_MENU_ES, - MSG_BED_CORRECTION_MENU_PL + MSG_BED_CORRECTION_MENU_PL, + MSG_BED_CORRECTION_MENU_DE }; const char MSG_BED_CORRECTION_REAR_EN[] PROGMEM = "Rear side um"; @@ -156,12 +171,14 @@ const char MSG_BED_CORRECTION_REAR_CZ[] PROGMEM = "Vzadu [um]"; const char MSG_BED_CORRECTION_REAR_IT[] PROGMEM = "Lato posteriore"; const char MSG_BED_CORRECTION_REAR_ES[] PROGMEM = "Atras [um]"; const char MSG_BED_CORRECTION_REAR_PL[] PROGMEM = "Do tylu [um]"; +const char MSG_BED_CORRECTION_REAR_DE[] PROGMEM = "Rueckseite [um]"; const char * const MSG_BED_CORRECTION_REAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_CORRECTION_REAR_EN, MSG_BED_CORRECTION_REAR_CZ, MSG_BED_CORRECTION_REAR_IT, MSG_BED_CORRECTION_REAR_ES, - MSG_BED_CORRECTION_REAR_PL + MSG_BED_CORRECTION_REAR_PL, + MSG_BED_CORRECTION_REAR_DE }; const char MSG_BED_CORRECTION_RESET_EN[] PROGMEM = "Reset"; @@ -171,41 +188,47 @@ const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[1] PROGMEM = { const char MSG_BED_CORRECTION_RIGHT_EN[] PROGMEM = "Right side um"; const char MSG_BED_CORRECTION_RIGHT_CZ[] PROGMEM = "Vpravo [um]"; -const char MSG_BED_CORRECTION_RIGHT_IT[] PROGMEM = "Lato destro um"; +const char MSG_BED_CORRECTION_RIGHT_IT[] PROGMEM = "Lato destro"; const char MSG_BED_CORRECTION_RIGHT_ES[] PROGMEM = "Derecha [um]"; const char MSG_BED_CORRECTION_RIGHT_PL[] PROGMEM = "W prawo [um]"; +const char MSG_BED_CORRECTION_RIGHT_DE[] PROGMEM = "Rechte Seite [um]"; const char * const MSG_BED_CORRECTION_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_CORRECTION_RIGHT_EN, MSG_BED_CORRECTION_RIGHT_CZ, MSG_BED_CORRECTION_RIGHT_IT, MSG_BED_CORRECTION_RIGHT_ES, - MSG_BED_CORRECTION_RIGHT_PL + MSG_BED_CORRECTION_RIGHT_PL, + MSG_BED_CORRECTION_RIGHT_DE }; const char MSG_BED_DONE_EN[] PROGMEM = "Bed done"; const char MSG_BED_DONE_CZ[] PROGMEM = "Bed OK."; const char MSG_BED_DONE_IT[] PROGMEM = "Piatto fatto."; -const char MSG_BED_DONE_ES[] PROGMEM = "Base listo."; +const char MSG_BED_DONE_ES[] PROGMEM = "Base preparada"; const char MSG_BED_DONE_PL[] PROGMEM = "Stolik OK."; +const char MSG_BED_DONE_DE[] PROGMEM = "Bed OK"; const char * const MSG_BED_DONE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_DONE_EN, MSG_BED_DONE_CZ, MSG_BED_DONE_IT, MSG_BED_DONE_ES, - MSG_BED_DONE_PL + MSG_BED_DONE_PL, + MSG_BED_DONE_DE }; const char MSG_BED_HEATING_EN[] PROGMEM = "Bed Heating"; const char MSG_BED_HEATING_CZ[] PROGMEM = "Zahrivani bed"; const char MSG_BED_HEATING_IT[] PROGMEM = "Riscald. letto"; -const char MSG_BED_HEATING_ES[] PROGMEM = "Base Calentando"; +const char MSG_BED_HEATING_ES[] PROGMEM = "Calentando Base"; const char MSG_BED_HEATING_PL[] PROGMEM = "Grzanie stolika.."; +const char MSG_BED_HEATING_DE[] PROGMEM = "Bed erwaermen"; const char * const MSG_BED_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_HEATING_EN, MSG_BED_HEATING_CZ, MSG_BED_HEATING_IT, MSG_BED_HEATING_ES, - MSG_BED_HEATING_PL + MSG_BED_HEATING_PL, + MSG_BED_HEATING_DE }; const char MSG_BED_LEVELING_FAILED_POINT_HIGH_EN[] PROGMEM = "Bed leveling failed. Sensor triggered too high. Waiting for reset."; @@ -213,12 +236,14 @@ const char MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ[] PROGMEM = "Kalibrace Z selhal const char MSG_BED_LEVELING_FAILED_POINT_HIGH_IT[] PROGMEM = "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset."; const char MSG_BED_LEVELING_FAILED_POINT_HIGH_ES[] PROGMEM = "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset."; const char MSG_BED_LEVELING_FAILED_POINT_HIGH_PL[] PROGMEM = "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset."; +const char MSG_BED_LEVELING_FAILED_POINT_HIGH_DE[] PROGMEM = "Z-Kalibrierung fehlgeschlg. Sensor zu hoch ausgeloest. Warte auf Reset."; const char * const MSG_BED_LEVELING_FAILED_POINT_HIGH_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_LEVELING_FAILED_POINT_HIGH_EN, MSG_BED_LEVELING_FAILED_POINT_HIGH_CZ, MSG_BED_LEVELING_FAILED_POINT_HIGH_IT, MSG_BED_LEVELING_FAILED_POINT_HIGH_ES, - MSG_BED_LEVELING_FAILED_POINT_HIGH_PL + MSG_BED_LEVELING_FAILED_POINT_HIGH_PL, + MSG_BED_LEVELING_FAILED_POINT_HIGH_DE }; const char MSG_BED_LEVELING_FAILED_POINT_LOW_EN[] PROGMEM = "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."; @@ -226,12 +251,14 @@ const char MSG_BED_LEVELING_FAILED_POINT_LOW_CZ[] PROGMEM = "Kalibrace Z selhala const char MSG_BED_LEVELING_FAILED_POINT_LOW_IT[] PROGMEM = "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset."; const char MSG_BED_LEVELING_FAILED_POINT_LOW_ES[] PROGMEM = "Nivelacion fallada. Sensor no funciona. Escombros en Boqui.? Esperando reset."; const char MSG_BED_LEVELING_FAILED_POINT_LOW_PL[] PROGMEM = "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset."; +const char MSG_BED_LEVELING_FAILED_POINT_LOW_DE[] PROGMEM = "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutze Duese? Warte auf RST"; const char * const MSG_BED_LEVELING_FAILED_POINT_LOW_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_LEVELING_FAILED_POINT_LOW_EN, MSG_BED_LEVELING_FAILED_POINT_LOW_CZ, MSG_BED_LEVELING_FAILED_POINT_LOW_IT, MSG_BED_LEVELING_FAILED_POINT_LOW_ES, - MSG_BED_LEVELING_FAILED_POINT_LOW_PL + MSG_BED_LEVELING_FAILED_POINT_LOW_PL, + MSG_BED_LEVELING_FAILED_POINT_LOW_DE }; const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN[] PROGMEM = "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."; @@ -239,12 +266,14 @@ const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ[] PROGMEM = "Kalibrace const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_IT[] PROGMEM = "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset."; const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_ES[] PROGMEM = "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset."; const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_PL[] PROGMEM = "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset."; +const char MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_DE[] PROGMEM = "Z-Kalibrierung fehlgeschlg. Sensor nicht angeschlossen. Warte auf Reset."; const char * const MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_EN, MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_CZ, MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_IT, MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_ES, - MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_PL + MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_PL, + MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration failed. Front calibration points not reachable."; @@ -252,12 +281,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ[] PROGMEM = "K const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delanteros no alcanzables."; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke."; +const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit nach vorne."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_EN, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_CZ, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_IT, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_ES, - MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_PL + MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_PL, + MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration failed. Left front calibration point not reachable."; @@ -265,12 +296,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ[] PROGMEM = "K const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero izquierdo no alcanzable."; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke."; +const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit nach vorne."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_EN, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_CZ, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_IT, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_ES, - MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_PL + MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_PL, + MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration failed. Right front calibration point not reachable."; @@ -278,12 +311,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ[] PROGMEM = " const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibracion XYZ fallad. Punto delantero derecho no alcanzable."; const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke."; +const char MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit nach vorne."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_EN, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_CZ, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_IT, MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_ES, - MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_PL + MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_PL, + MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN[] PROGMEM = "XYZ calibration failed. Please consult the manual."; @@ -291,12 +326,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ[] PROGMEM = "Kalibrac const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_IT[] PROGMEM = "Calibrazione XYZ fallita. Si prega di consultare il manuale."; const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_ES[] PROGMEM = "Calibracion XYZ fallada. Consultar el manual por favor."; const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_PL[] PROGMEM = "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji."; +const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_EN, MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_CZ, MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_IT, MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_ES, - MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_PL + MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_PL, + MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN[] PROGMEM = "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"; @@ -304,12 +341,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ[] PROGMEM = "Kalibrace XYZ v const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_IT[] PROGMEM = "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"; const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_ES[] PROGMEM = "Calibracion XYZ ok. Ejes X/Y perpendiculares. Felicitaciones!"; const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_PL[] PROGMEM = "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"; +const char MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_DE[] PROGMEM = "XYZ-Kalibrierung ok. X/Y-Achsen sind im Lot. Glueckwunsch!"; const char * const MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_EN, MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_CZ, MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_IT, MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_ES, - MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_PL + MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_PL, + MSG_BED_SKEW_OFFSET_DETECTION_PERFECT_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN[] PROGMEM = "XYZ calibration failed. Bed calibration point was not found."; @@ -317,12 +356,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ[] PROGMEM = "Kalibra const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_IT[] PROGMEM = "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato."; const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_ES[] PROGMEM = "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados."; const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL[] PROGMEM = "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony."; +const char MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE[] PROGMEM = "XYZ-Kalibrierung fehlgeschlagen. Bed-Kalibrierpunkt nicht gefunden."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_EN, MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_CZ, MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_IT, MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_ES, - MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL + MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL, + MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "XYZ callibration all right. Skew will be corrected automatically."; @@ -330,12 +371,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_IT[] PROGMEM = "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata."; const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_ES[] PROGMEM = "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."; const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_PL[] PROGMEM = "Kalibracja XYZ prawidlowa. Skosy beda automatycznie wyrownane przy druku."; +const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_DE[] PROGMEM = "XYZ Kalibrierung in Ordnung. Schiefheit wird automatisch korrigiert."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN, MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ, MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_IT, MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_ES, - MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_PL + MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_PL, + MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN[] PROGMEM = "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"; @@ -343,12 +386,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ[] PROGMEM = "Kalibrace XYZ const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_IT[] PROGMEM = "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"; const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_ES[] PROGMEM = "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"; const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_PL[] PROGMEM = "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"; +const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_DE[] PROGMEM = "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN, MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ, MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_IT, MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_ES, - MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_PL + MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_PL, + MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN[] PROGMEM = "XYZ calibration compromised. Front calibration points not reachable."; @@ -356,12 +401,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ[] PROGMEM = " const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delanteros no alcanzables."; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_PL[] PROGMEM = "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu."; +const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit nach vorne."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_EN, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_CZ, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_IT, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_ES, - MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_PL + MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_PL, + MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Left front calibration point not reachable."; @@ -369,12 +416,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ[] PROGMEM = " const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero izquierdo no alcanzable."; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu."; +const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit nach vorne."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_EN, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_CZ, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_IT, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_ES, - MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_PL + MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_PL, + MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR_DE }; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN[] PROGMEM = "XYZ calibration compromised. Right front calibration point not reachable."; @@ -382,12 +431,14 @@ const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ[] PROGMEM = const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_IT[] PROGMEM = "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_ES[] PROGMEM = "Calibrazion XYZ comprometida. Punto delantero derecho no alcanzable."; const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_PL[] PROGMEM = "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu."; +const char MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE[] PROGMEM = "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit nach vorne."; const char * const MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_EN, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_CZ, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_IT, MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_ES, - MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_PL + MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_PL, + MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR_DE }; const char MSG_BEGIN_FILE_LIST_EN[] PROGMEM = "Begin file list"; @@ -405,23 +456,27 @@ const char MSG_CALIBRATE_BED_CZ[] PROGMEM = "Kalibrace XYZ"; const char MSG_CALIBRATE_BED_IT[] PROGMEM = "Calibra XYZ"; const char MSG_CALIBRATE_BED_ES[] PROGMEM = "Calibra XYZ"; const char MSG_CALIBRATE_BED_PL[] PROGMEM = "Kalibracja XYZ"; +const char MSG_CALIBRATE_BED_DE[] PROGMEM = "Kalibrierung XYZ"; const char * const MSG_CALIBRATE_BED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CALIBRATE_BED_EN, MSG_CALIBRATE_BED_CZ, MSG_CALIBRATE_BED_IT, MSG_CALIBRATE_BED_ES, - MSG_CALIBRATE_BED_PL + MSG_CALIBRATE_BED_PL, + MSG_CALIBRATE_BED_DE }; const char MSG_CALIBRATE_BED_RESET_EN[] PROGMEM = "Reset XYZ calibr."; const char MSG_CALIBRATE_BED_RESET_CZ[] PROGMEM = "Reset XYZ kalibr."; const char MSG_CALIBRATE_BED_RESET_PL[] PROGMEM = "Reset kalibr. XYZ"; +const char MSG_CALIBRATE_BED_RESET_DE[] PROGMEM = "Reset XYZ Kalibr."; const char * const MSG_CALIBRATE_BED_RESET_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CALIBRATE_BED_RESET_EN, MSG_CALIBRATE_BED_RESET_CZ, MSG_CALIBRATE_BED_RESET_EN, MSG_CALIBRATE_BED_RESET_EN, - MSG_CALIBRATE_BED_RESET_PL + MSG_CALIBRATE_BED_RESET_PL, + MSG_CALIBRATE_BED_RESET_DE }; const char MSG_CALIBRATE_E_EN[] PROGMEM = "Calibrate E"; @@ -429,25 +484,29 @@ const char MSG_CALIBRATE_E_CZ[] PROGMEM = "Kalibrovat E"; const char MSG_CALIBRATE_E_IT[] PROGMEM = "Calibra E"; const char MSG_CALIBRATE_E_ES[] PROGMEM = "Calibrar E"; const char MSG_CALIBRATE_E_PL[] PROGMEM = "Kalibruj E"; +const char MSG_CALIBRATE_E_DE[] PROGMEM = "Kalibriere E"; const char * const MSG_CALIBRATE_E_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CALIBRATE_E_EN, MSG_CALIBRATE_E_CZ, MSG_CALIBRATE_E_IT, MSG_CALIBRATE_E_ES, - MSG_CALIBRATE_E_PL + MSG_CALIBRATE_E_PL, + MSG_CALIBRATE_E_DE }; const char MSG_CARD_MENU_EN[] PROGMEM = "Print from SD"; const char MSG_CARD_MENU_CZ[] PROGMEM = "Tisk z SD"; const char MSG_CARD_MENU_IT[] PROGMEM = "Stampa da SD"; -const char MSG_CARD_MENU_ES[] PROGMEM = "Menu de SD"; +const char MSG_CARD_MENU_ES[] PROGMEM = "Menu tarjeta SD"; const char MSG_CARD_MENU_PL[] PROGMEM = "Druk z SD"; +const char MSG_CARD_MENU_DE[] PROGMEM = "Drucken von SD"; const char * const MSG_CARD_MENU_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CARD_MENU_EN, MSG_CARD_MENU_CZ, MSG_CARD_MENU_IT, MSG_CARD_MENU_ES, - MSG_CARD_MENU_PL + MSG_CARD_MENU_PL, + MSG_CARD_MENU_DE }; const char MSG_CHANGE_EXTR_EN[] PROGMEM = "Change extruder"; @@ -455,38 +514,44 @@ const char MSG_CHANGE_EXTR_CZ[] PROGMEM = "Zmenit extruder"; const char MSG_CHANGE_EXTR_IT[] PROGMEM = "Cambio estrusore."; const char MSG_CHANGE_EXTR_ES[] PROGMEM = "Cambiar extrusor."; const char MSG_CHANGE_EXTR_PL[] PROGMEM = "Zmienic ekstruder"; +const char MSG_CHANGE_EXTR_DE[] PROGMEM = "Wechsel extruder"; const char * const MSG_CHANGE_EXTR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CHANGE_EXTR_EN, MSG_CHANGE_EXTR_CZ, MSG_CHANGE_EXTR_IT, MSG_CHANGE_EXTR_ES, - MSG_CHANGE_EXTR_PL + MSG_CHANGE_EXTR_PL, + MSG_CHANGE_EXTR_DE }; const char MSG_CHANGE_SUCCESS_EN[] PROGMEM = "Change success!"; const char MSG_CHANGE_SUCCESS_CZ[] PROGMEM = "Zmena uspesna!"; const char MSG_CHANGE_SUCCESS_IT[] PROGMEM = "Cambio riuscito!"; -const char MSG_CHANGE_SUCCESS_ES[] PROGMEM = "Cambiar bien!"; +const char MSG_CHANGE_SUCCESS_ES[] PROGMEM = "Cambio correcto"; const char MSG_CHANGE_SUCCESS_PL[] PROGMEM = "Wymiana ok!"; +const char MSG_CHANGE_SUCCESS_DE[] PROGMEM = "Wechsel erfolgr.!"; const char * const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CHANGE_SUCCESS_EN, MSG_CHANGE_SUCCESS_CZ, MSG_CHANGE_SUCCESS_IT, MSG_CHANGE_SUCCESS_ES, - MSG_CHANGE_SUCCESS_PL + MSG_CHANGE_SUCCESS_PL, + MSG_CHANGE_SUCCESS_DE }; const char MSG_CHANGING_FILAMENT_EN[] PROGMEM = "Changing filament!"; const char MSG_CHANGING_FILAMENT_CZ[] PROGMEM = "Vymena filamentu!"; const char MSG_CHANGING_FILAMENT_IT[] PROGMEM = "Cambiando filam."; -const char MSG_CHANGING_FILAMENT_ES[] PROGMEM = "Cambiando fil.!"; +const char MSG_CHANGING_FILAMENT_ES[] PROGMEM = "Cambiando filamento"; const char MSG_CHANGING_FILAMENT_PL[] PROGMEM = "Wymiana filamentu"; +const char MSG_CHANGING_FILAMENT_DE[] PROGMEM = "Wechsel filament!"; const char * const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CHANGING_FILAMENT_EN, MSG_CHANGING_FILAMENT_CZ, MSG_CHANGING_FILAMENT_IT, MSG_CHANGING_FILAMENT_ES, - MSG_CHANGING_FILAMENT_PL + MSG_CHANGING_FILAMENT_PL, + MSG_CHANGING_FILAMENT_DE }; const char MSG_CLEAN_NOZZLE_E_EN[] PROGMEM = "E calibration finished. Please clean the nozzle. Click when done."; @@ -494,12 +559,14 @@ const char MSG_CLEAN_NOZZLE_E_CZ[] PROGMEM = "E kalibrace ukoncena. Prosim ocist const char MSG_CLEAN_NOZZLE_E_IT[] PROGMEM = "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare."; const char MSG_CLEAN_NOZZLE_E_ES[] PROGMEM = "E calibrado. Limpiar la boquilla. Haga clic una vez terminado."; const char MSG_CLEAN_NOZZLE_E_PL[] PROGMEM = "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. "; +const char MSG_CLEAN_NOZZLE_E_DE[] PROGMEM = "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig."; const char * const MSG_CLEAN_NOZZLE_E_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CLEAN_NOZZLE_E_EN, MSG_CLEAN_NOZZLE_E_CZ, MSG_CLEAN_NOZZLE_E_IT, MSG_CLEAN_NOZZLE_E_ES, - MSG_CLEAN_NOZZLE_E_PL + MSG_CLEAN_NOZZLE_E_PL, + MSG_CLEAN_NOZZLE_E_DE }; const char MSG_CNG_SDCARD_EN[] PROGMEM = "Change SD card"; @@ -517,12 +584,14 @@ const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ[] PROGMEM = "Dojely oba Z voziky k const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_IT[] PROGMEM = "I carrelli Z sin/des sono altezza max?"; const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_ES[] PROGMEM = "Carros Z izq./der. estan arriba maximo?"; const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_PL[] PROGMEM = "Oba wozki dojechaly do gornej ramy?"; +const char MSG_CONFIRM_CARRIAGE_AT_THE_TOP_DE[] PROGMEM = "Sind Z-Schlitten ganz oben?"; const char * const MSG_CONFIRM_CARRIAGE_AT_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CONFIRM_CARRIAGE_AT_THE_TOP_EN, MSG_CONFIRM_CARRIAGE_AT_THE_TOP_CZ, MSG_CONFIRM_CARRIAGE_AT_THE_TOP_IT, MSG_CONFIRM_CARRIAGE_AT_THE_TOP_ES, - MSG_CONFIRM_CARRIAGE_AT_THE_TOP_PL + MSG_CONFIRM_CARRIAGE_AT_THE_TOP_PL, + MSG_CONFIRM_CARRIAGE_AT_THE_TOP_DE }; const char MSG_CONFIRM_NOZZLE_CLEAN_EN[] PROGMEM = "Please clean the nozzle for calibration. Click when done."; @@ -530,12 +599,14 @@ const char MSG_CONFIRM_NOZZLE_CLEAN_CZ[] PROGMEM = "Pro uspesnou kalibraci ocist const char MSG_CONFIRM_NOZZLE_CLEAN_IT[] PROGMEM = "Pulire l'ugello per la calibrazione, poi fare click."; const char MSG_CONFIRM_NOZZLE_CLEAN_ES[] PROGMEM = "Limpiar boquilla para calibracion. Click cuando acabes."; const char MSG_CONFIRM_NOZZLE_CLEAN_PL[] PROGMEM = "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem."; +const char MSG_CONFIRM_NOZZLE_CLEAN_DE[] PROGMEM = "Bitte reinigen Sie die D\x81se zur Kalibrierung. Klicken wenn fertig."; const char * const MSG_CONFIRM_NOZZLE_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CONFIRM_NOZZLE_CLEAN_EN, MSG_CONFIRM_NOZZLE_CLEAN_CZ, MSG_CONFIRM_NOZZLE_CLEAN_IT, MSG_CONFIRM_NOZZLE_CLEAN_ES, - MSG_CONFIRM_NOZZLE_CLEAN_PL + MSG_CONFIRM_NOZZLE_CLEAN_PL, + MSG_CONFIRM_NOZZLE_CLEAN_DE }; const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN[] PROGMEM = "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."; @@ -543,12 +614,14 @@ const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ[] PROGMEM = "Filamenty jsou srovn const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_IT[] PROGMEM = "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."; const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_ES[] PROGMEM = "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado."; const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_PL[] PROGMEM = "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem."; +const char MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE[] PROGMEM = "Filaments sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig."; const char * const MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_EN, MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_CZ, MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_IT, MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_ES, - MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_PL + MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_PL, + MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ_DE }; const char MSG_CONTROL_EN[] PROGMEM = "Control"; @@ -561,25 +634,29 @@ const char MSG_COOLDOWN_CZ[] PROGMEM = "Zchladit"; const char MSG_COOLDOWN_IT[] PROGMEM = "Raffredda"; const char MSG_COOLDOWN_ES[] PROGMEM = "Enfriar"; const char MSG_COOLDOWN_PL[] PROGMEM = "Wychlodzic"; +const char MSG_COOLDOWN_DE[] PROGMEM = "Abkuehlen"; const char * const MSG_COOLDOWN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_COOLDOWN_EN, MSG_COOLDOWN_CZ, MSG_COOLDOWN_IT, MSG_COOLDOWN_ES, - MSG_COOLDOWN_PL + MSG_COOLDOWN_PL, + MSG_COOLDOWN_DE }; const char MSG_CORRECTLY_EN[] PROGMEM = "Changed correctly?"; const char MSG_CORRECTLY_CZ[] PROGMEM = "Vymena ok?"; const char MSG_CORRECTLY_IT[] PROGMEM = "Cambiato corr.?"; -const char MSG_CORRECTLY_ES[] PROGMEM = "Cambiado correc.?"; +const char MSG_CORRECTLY_ES[] PROGMEM = "Cambiado correct.?"; const char MSG_CORRECTLY_PL[] PROGMEM = "Wymiana ok?"; +const char MSG_CORRECTLY_DE[] PROGMEM = "Wechsel ok?"; const char * const MSG_CORRECTLY_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_CORRECTLY_EN, MSG_CORRECTLY_CZ, MSG_CORRECTLY_IT, MSG_CORRECTLY_ES, - MSG_CORRECTLY_PL + MSG_CORRECTLY_PL, + MSG_CORRECTLY_DE }; const char MSG_COUNT_X_EN[] PROGMEM = " Count X: "; @@ -592,23 +669,27 @@ const char MSG_DISABLE_STEPPERS_CZ[] PROGMEM = "Vypnout motory"; const char MSG_DISABLE_STEPPERS_IT[] PROGMEM = "Disabilit motori"; const char MSG_DISABLE_STEPPERS_ES[] PROGMEM = "Apagar motores"; const char MSG_DISABLE_STEPPERS_PL[] PROGMEM = "Wylaczyc silniki"; +const char MSG_DISABLE_STEPPERS_DE[] PROGMEM = "Deaktiviere Motor"; const char * const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_DISABLE_STEPPERS_EN, MSG_DISABLE_STEPPERS_CZ, MSG_DISABLE_STEPPERS_IT, MSG_DISABLE_STEPPERS_ES, - MSG_DISABLE_STEPPERS_PL + MSG_DISABLE_STEPPERS_PL, + MSG_DISABLE_STEPPERS_DE }; const char MSG_DWELL_EN[] PROGMEM = "Sleep..."; const char MSG_DWELL_IT[] PROGMEM = "Sospensione..."; -const char MSG_DWELL_ES[] PROGMEM = "Reposo..."; +const char MSG_DWELL_ES[] PROGMEM = "En espera"; +const char MSG_DWELL_DE[] PROGMEM = "Schlaf..."; const char * const MSG_DWELL_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_DWELL_EN, MSG_DWELL_EN, MSG_DWELL_IT, MSG_DWELL_ES, - MSG_DWELL_EN + MSG_DWELL_EN, + MSG_DWELL_DE }; const char MSG_ENDSTOPS_HIT_EN[] PROGMEM = "endstops hit: "; @@ -635,12 +716,14 @@ const char MSG_ERROR_EN[] PROGMEM = "ERROR:"; const char MSG_ERROR_CZ[] PROGMEM = "CHYBA:"; const char MSG_ERROR_IT[] PROGMEM = "ERRORE:"; const char MSG_ERROR_PL[] PROGMEM = "BLAD:"; +const char MSG_ERROR_DE[] PROGMEM = "FEHLER:"; const char * const MSG_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_ERROR_EN, MSG_ERROR_CZ, MSG_ERROR_IT, MSG_ERROR_EN, - MSG_ERROR_PL + MSG_ERROR_PL, + MSG_ERROR_DE }; const char MSG_ERR_CHECKSUM_MISMATCH_EN[] PROGMEM = "checksum mismatch, Last Line: "; @@ -698,12 +781,14 @@ const char MSG_E_CAL_KNOB_CZ[] PROGMEM = "Otacejte tlacitkem dokud znacka nedosa const char MSG_E_CAL_KNOB_IT[] PROGMEM = "Girare la manopola affinche' il segno raggiunga il corpo dell'estrusore. Click per continuare."; const char MSG_E_CAL_KNOB_ES[] PROGMEM = "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haga clic una vez terminado."; const char MSG_E_CAL_KNOB_PL[] PROGMEM = "Prosze otaczac przycisk poki znacznik nie dosiegnie ciala ekstrudera. Potwierdzic przyciskiem."; +const char MSG_E_CAL_KNOB_DE[] PROGMEM = "Dreh den Knopf bis das Extruder Zeichen erreicht ist. Klicken wenn fertig."; const char * const MSG_E_CAL_KNOB_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_E_CAL_KNOB_EN, MSG_E_CAL_KNOB_CZ, MSG_E_CAL_KNOB_IT, MSG_E_CAL_KNOB_ES, - MSG_E_CAL_KNOB_PL + MSG_E_CAL_KNOB_PL, + MSG_E_CAL_KNOB_DE }; const char MSG_Enqueing_EN[] PROGMEM = "enqueing \""; @@ -718,15 +803,17 @@ const char * const MSG_FACTOR_LANG_TABLE[1] PROGMEM = { const char MSG_FAN_SPEED_EN[] PROGMEM = "Fan speed"; const char MSG_FAN_SPEED_CZ[] PROGMEM = "Rychlost vent."; -const char MSG_FAN_SPEED_IT[] PROGMEM = "Velocita ventola"; -const char MSG_FAN_SPEED_ES[] PROGMEM = "Ventilador"; +const char MSG_FAN_SPEED_IT[] PROGMEM = "Velocita vent."; +const char MSG_FAN_SPEED_ES[] PROGMEM = "Velocidad Vent."; const char MSG_FAN_SPEED_PL[] PROGMEM = "Predkosc went."; +const char MSG_FAN_SPEED_DE[] PROGMEM = "Lueftergeschw."; const char * const MSG_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FAN_SPEED_EN, MSG_FAN_SPEED_CZ, MSG_FAN_SPEED_IT, MSG_FAN_SPEED_ES, - MSG_FAN_SPEED_PL + MSG_FAN_SPEED_PL, + MSG_FAN_SPEED_DE }; const char MSG_FARM_CARD_MENU_EN[] PROGMEM = "Farm mode print"; @@ -739,12 +826,14 @@ const char MSG_FILAMENTCHANGE_CZ[] PROGMEM = "Vymenit filament"; const char MSG_FILAMENTCHANGE_IT[] PROGMEM = "Camb. filamento"; const char MSG_FILAMENTCHANGE_ES[] PROGMEM = "Cambiar filamento"; const char MSG_FILAMENTCHANGE_PL[] PROGMEM = "Wymienic filament"; +const char MSG_FILAMENTCHANGE_DE[] PROGMEM = "Wechsel filament"; const char * const MSG_FILAMENTCHANGE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FILAMENTCHANGE_EN, MSG_FILAMENTCHANGE_CZ, MSG_FILAMENTCHANGE_IT, MSG_FILAMENTCHANGE_ES, - MSG_FILAMENTCHANGE_PL + MSG_FILAMENTCHANGE_PL, + MSG_FILAMENTCHANGE_DE }; const char MSG_FILAMENT_CLEAN_EN[] PROGMEM = "Is color clear?"; @@ -752,12 +841,14 @@ const char MSG_FILAMENT_CLEAN_CZ[] PROGMEM = "Je barva cista?"; const char MSG_FILAMENT_CLEAN_IT[] PROGMEM = "Il colore e' nitido?"; const char MSG_FILAMENT_CLEAN_ES[] PROGMEM = "Es el nuevo color nitido?"; const char MSG_FILAMENT_CLEAN_PL[] PROGMEM = "Czy kolor jest czysty?"; +const char MSG_FILAMENT_CLEAN_DE[] PROGMEM = "Ist Farbe klar?"; const char * const MSG_FILAMENT_CLEAN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FILAMENT_CLEAN_EN, MSG_FILAMENT_CLEAN_CZ, MSG_FILAMENT_CLEAN_IT, MSG_FILAMENT_CLEAN_ES, - MSG_FILAMENT_CLEAN_PL + MSG_FILAMENT_CLEAN_PL, + MSG_FILAMENT_CLEAN_DE }; const char MSG_FILAMENT_LOADING_T0_EN[] PROGMEM = "Insert filament into extruder 1. Click when done."; @@ -765,12 +856,14 @@ const char MSG_FILAMENT_LOADING_T0_CZ[] PROGMEM = "Vlo\x9Ete filament do extrude const char MSG_FILAMENT_LOADING_T0_IT[] PROGMEM = "Inserire filamento nell'estrusore 1. Click per continuare."; const char MSG_FILAMENT_LOADING_T0_ES[] PROGMEM = "Insertar filamento en el extrusor 1. Haga clic una vez terminado."; const char MSG_FILAMENT_LOADING_T0_PL[] PROGMEM = "Wloz filament do ekstrudera 1. Potwierdz przyciskiem."; +const char MSG_FILAMENT_LOADING_T0_DE[] PROGMEM = "Filament in extruder 1 einlegen. Klicken wenn fertig."; const char * const MSG_FILAMENT_LOADING_T0_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FILAMENT_LOADING_T0_EN, MSG_FILAMENT_LOADING_T0_CZ, MSG_FILAMENT_LOADING_T0_IT, MSG_FILAMENT_LOADING_T0_ES, - MSG_FILAMENT_LOADING_T0_PL + MSG_FILAMENT_LOADING_T0_PL, + MSG_FILAMENT_LOADING_T0_DE }; const char MSG_FILAMENT_LOADING_T1_EN[] PROGMEM = "Insert filament into extruder 2. Click when done."; @@ -778,12 +871,14 @@ const char MSG_FILAMENT_LOADING_T1_CZ[] PROGMEM = "Vlo\x9Ete filament do extrude const char MSG_FILAMENT_LOADING_T1_IT[] PROGMEM = "Inserire filamento nell'estrusore 2. Click per continuare."; const char MSG_FILAMENT_LOADING_T1_ES[] PROGMEM = "Insertar filamento en el extrusor 2. Haga clic una vez terminado."; const char MSG_FILAMENT_LOADING_T1_PL[] PROGMEM = "Wloz filament do ekstrudera 2. Potwierdz przyciskiem."; +const char MSG_FILAMENT_LOADING_T1_DE[] PROGMEM = "Filament in extruder 2 einlegen. Klicken wenn fertig."; const char * const MSG_FILAMENT_LOADING_T1_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FILAMENT_LOADING_T1_EN, MSG_FILAMENT_LOADING_T1_CZ, MSG_FILAMENT_LOADING_T1_IT, MSG_FILAMENT_LOADING_T1_ES, - MSG_FILAMENT_LOADING_T1_PL + MSG_FILAMENT_LOADING_T1_PL, + MSG_FILAMENT_LOADING_T1_DE }; const char MSG_FILAMENT_LOADING_T2_EN[] PROGMEM = "Insert filament into extruder 3. Click when done."; @@ -791,12 +886,14 @@ const char MSG_FILAMENT_LOADING_T2_CZ[] PROGMEM = "Vlo\x9Ete filament do extrude const char MSG_FILAMENT_LOADING_T2_IT[] PROGMEM = "Inserire filamento nell'estrusore 3. Click per continuare."; const char MSG_FILAMENT_LOADING_T2_ES[] PROGMEM = "Insertar filamento en el extrusor 3. Haga clic una vez terminado."; const char MSG_FILAMENT_LOADING_T2_PL[] PROGMEM = "Wloz filament do ekstrudera 3. Potwierdz przyciskiem."; +const char MSG_FILAMENT_LOADING_T2_DE[] PROGMEM = "Filament in extruder 3 einlegen. Klicken wenn fertig."; const char * const MSG_FILAMENT_LOADING_T2_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FILAMENT_LOADING_T2_EN, MSG_FILAMENT_LOADING_T2_CZ, MSG_FILAMENT_LOADING_T2_IT, MSG_FILAMENT_LOADING_T2_ES, - MSG_FILAMENT_LOADING_T2_PL + MSG_FILAMENT_LOADING_T2_PL, + MSG_FILAMENT_LOADING_T2_DE }; const char MSG_FILAMENT_LOADING_T3_EN[] PROGMEM = "Insert filament into extruder 4. Click when done."; @@ -804,12 +901,14 @@ const char MSG_FILAMENT_LOADING_T3_CZ[] PROGMEM = "Vlo\x9Ete filament do extrude const char MSG_FILAMENT_LOADING_T3_IT[] PROGMEM = "Inserire filamento nell'estrusore 4. Click per continuare."; const char MSG_FILAMENT_LOADING_T3_ES[] PROGMEM = "Insertar filamento en el extrusor 4. Haga clic una vez terminado."; const char MSG_FILAMENT_LOADING_T3_PL[] PROGMEM = "Wloz filament do ekstrudera 4. Potwierdz przyciskiem."; +const char MSG_FILAMENT_LOADING_T3_DE[] PROGMEM = "Filament in extruder 4 einlegen. Klicken wenn fertig."; const char * const MSG_FILAMENT_LOADING_T3_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FILAMENT_LOADING_T3_EN, MSG_FILAMENT_LOADING_T3_CZ, MSG_FILAMENT_LOADING_T3_IT, MSG_FILAMENT_LOADING_T3_ES, - MSG_FILAMENT_LOADING_T3_PL + MSG_FILAMENT_LOADING_T3_PL, + MSG_FILAMENT_LOADING_T3_DE }; const char MSG_FILE_PRINTED_EN[] PROGMEM = "Done printing file"; @@ -827,12 +926,14 @@ const char MSG_FIL_ADJUSTING_CZ[] PROGMEM = "Probiha srovnani filamentu. Prosim const char MSG_FIL_ADJUSTING_IT[] PROGMEM = "Filamento in fase di regolazione. Attendere prego."; const char MSG_FIL_ADJUSTING_ES[] PROGMEM = "Ajustando filamentos. Esperar por favor."; const char MSG_FIL_ADJUSTING_PL[] PROGMEM = "Przebiega wyrownanie filamentow. Prosze czekac."; +const char MSG_FIL_ADJUSTING_DE[] PROGMEM = "Einstellen Filament. Bitte warten."; const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FIL_ADJUSTING_EN, MSG_FIL_ADJUSTING_CZ, MSG_FIL_ADJUSTING_IT, MSG_FIL_ADJUSTING_ES, - MSG_FIL_ADJUSTING_PL + MSG_FIL_ADJUSTING_PL, + MSG_FIL_ADJUSTING_DE }; const char MSG_FIL_LOADED_CHECK_EN[] PROGMEM = "Is filament loaded?"; @@ -840,12 +941,14 @@ const char MSG_FIL_LOADED_CHECK_CZ[] PROGMEM = "Je filament zaveden?"; const char MSG_FIL_LOADED_CHECK_IT[] PROGMEM = "Filamento caricato?"; const char MSG_FIL_LOADED_CHECK_ES[] PROGMEM = "Esta cargado el filamento?"; const char MSG_FIL_LOADED_CHECK_PL[] PROGMEM = "Czy filament jest wprowadzony?"; +const char MSG_FIL_LOADED_CHECK_DE[] PROGMEM = "Filament eingelegt?"; const char * const MSG_FIL_LOADED_CHECK_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FIL_LOADED_CHECK_EN, MSG_FIL_LOADED_CHECK_CZ, MSG_FIL_LOADED_CHECK_IT, MSG_FIL_LOADED_CHECK_ES, - MSG_FIL_LOADED_CHECK_PL + MSG_FIL_LOADED_CHECK_PL, + MSG_FIL_LOADED_CHECK_DE }; const char MSG_FIL_TUNING_EN[] PROGMEM = "Rotate the knob to adjust filament."; @@ -853,12 +956,14 @@ const char MSG_FIL_TUNING_CZ[] PROGMEM = "Otacenim tlacitka doladte pozici filam const char MSG_FIL_TUNING_IT[] PROGMEM = "Girare la manopola per regolare il filamento"; const char MSG_FIL_TUNING_ES[] PROGMEM = "Rotar el mando para ajustar el filamento."; const char MSG_FIL_TUNING_PL[] PROGMEM = "Obrotem przycisku dostroj pozycje filamentu."; +const char MSG_FIL_TUNING_DE[] PROGMEM = "Knopf drehen um Filam. einzustellen."; const char * const MSG_FIL_TUNING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FIL_TUNING_EN, MSG_FIL_TUNING_CZ, MSG_FIL_TUNING_IT, MSG_FIL_TUNING_ES, - MSG_FIL_TUNING_PL + MSG_FIL_TUNING_PL, + MSG_FIL_TUNING_DE }; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN[] PROGMEM = "Searching bed calibration point"; @@ -866,12 +971,14 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Hledam kalibracni const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Ricerca del letto punto di calibraz."; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Buscando cama punto de calibracion"; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Szukam punktu kalibracyjnego podkladki"; +const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Suchen Bed Kalibrierpunkt"; const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_EN, MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_CZ, MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_IT, MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_ES, - MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_PL + MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_PL, + MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_DE }; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_EN[] PROGMEM = " of 4"; @@ -879,12 +986,14 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_CZ[] PROGMEM = " z 4"; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_IT[] PROGMEM = " su 4"; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_ES[] PROGMEM = " de 4"; const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_PL[] PROGMEM = " z 4"; +const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_DE[] PROGMEM = " von 4"; const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_EN, MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_CZ, MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_IT, MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_ES, - MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_PL + MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_PL, + MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_DE }; const char MSG_FLOW_EN[] PROGMEM = "Flow"; @@ -892,12 +1001,14 @@ const char MSG_FLOW_CZ[] PROGMEM = "Prutok"; const char MSG_FLOW_IT[] PROGMEM = "Flusso"; const char MSG_FLOW_ES[] PROGMEM = "Flujo"; const char MSG_FLOW_PL[] PROGMEM = "Przeplyw"; +const char MSG_FLOW_DE[] PROGMEM = "Durchfluss"; const char * const MSG_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FLOW_EN, MSG_FLOW_CZ, MSG_FLOW_IT, MSG_FLOW_ES, - MSG_FLOW_PL + MSG_FLOW_PL, + MSG_FLOW_DE }; const char MSG_FLOW0_EN[] PROGMEM = "Flow 0"; @@ -920,12 +1031,14 @@ const char MSG_FOLLOW_CALIBRATION_FLOW_CZ[] PROGMEM = "Tiskarna nebyla jeste zka const char MSG_FOLLOW_CALIBRATION_FLOW_IT[] PROGMEM = "Stampante ancora non calibrata. Si prega di seguire il manuale, capitolo PRIMI PASSI, sezione della calibrazione."; const char MSG_FOLLOW_CALIBRATION_FLOW_ES[] PROGMEM = "Impresora no esta calibrada todavia. Por favor usar el manual, el capitulo First steps, seleccion Calibration flow."; const char MSG_FOLLOW_CALIBRATION_FLOW_PL[] PROGMEM = "Drukarka nie zostala jeszcze skalibrowana. Prosze kierowac sie instrukcja, rozdzial Zaczynamy, podrozdzial Selftest."; +const char MSG_FOLLOW_CALIBRATION_FLOW_DE[] PROGMEM = "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie dem Handbuch, Kapitel First steps, Abschnitt Calibration flow."; const char * const MSG_FOLLOW_CALIBRATION_FLOW_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_FOLLOW_CALIBRATION_FLOW_EN, MSG_FOLLOW_CALIBRATION_FLOW_CZ, MSG_FOLLOW_CALIBRATION_FLOW_IT, MSG_FOLLOW_CALIBRATION_FLOW_ES, - MSG_FOLLOW_CALIBRATION_FLOW_PL + MSG_FOLLOW_CALIBRATION_FLOW_PL, + MSG_FOLLOW_CALIBRATION_FLOW_DE }; const char MSG_FREE_MEMORY_EN[] PROGMEM = " Free Memory: "; @@ -938,25 +1051,29 @@ const char MSG_HEATING_CZ[] PROGMEM = "Zahrivani"; const char MSG_HEATING_IT[] PROGMEM = "Riscaldamento..."; const char MSG_HEATING_ES[] PROGMEM = "Calentando..."; const char MSG_HEATING_PL[] PROGMEM = "Grzanie..."; +const char MSG_HEATING_DE[] PROGMEM = "Erwaermen"; const char * const MSG_HEATING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_HEATING_EN, MSG_HEATING_CZ, MSG_HEATING_IT, MSG_HEATING_ES, - MSG_HEATING_PL + MSG_HEATING_PL, + MSG_HEATING_DE }; const char MSG_HEATING_COMPLETE_EN[] PROGMEM = "Heating done."; const char MSG_HEATING_COMPLETE_CZ[] PROGMEM = "Zahrivani OK."; const char MSG_HEATING_COMPLETE_IT[] PROGMEM = "Riscald. completo"; -const char MSG_HEATING_COMPLETE_ES[] PROGMEM = "Calentando listo."; +const char MSG_HEATING_COMPLETE_ES[] PROGMEM = "Calentamiento final."; const char MSG_HEATING_COMPLETE_PL[] PROGMEM = "Grzanie OK."; +const char MSG_HEATING_COMPLETE_DE[] PROGMEM = "Erwaermen OK"; const char * const MSG_HEATING_COMPLETE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_HEATING_COMPLETE_EN, MSG_HEATING_COMPLETE_CZ, MSG_HEATING_COMPLETE_IT, MSG_HEATING_COMPLETE_ES, - MSG_HEATING_COMPLETE_PL + MSG_HEATING_COMPLETE_PL, + MSG_HEATING_COMPLETE_DE }; const char MSG_HOMEYZ_EN[] PROGMEM = "Calibrate Z"; @@ -964,12 +1081,14 @@ const char MSG_HOMEYZ_CZ[] PROGMEM = "Kalibrovat Z"; const char MSG_HOMEYZ_IT[] PROGMEM = "Calibra Z"; const char MSG_HOMEYZ_ES[] PROGMEM = "Calibrar Z"; const char MSG_HOMEYZ_PL[] PROGMEM = "Kalibruj Z"; +const char MSG_HOMEYZ_DE[] PROGMEM = "Kalibrieren Z"; const char * const MSG_HOMEYZ_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_HOMEYZ_EN, MSG_HOMEYZ_CZ, MSG_HOMEYZ_IT, MSG_HOMEYZ_ES, - MSG_HOMEYZ_PL + MSG_HOMEYZ_PL, + MSG_HOMEYZ_DE }; const char MSG_HOMEYZ_DONE_EN[] PROGMEM = "Calibration done"; @@ -977,12 +1096,14 @@ const char MSG_HOMEYZ_DONE_CZ[] PROGMEM = "Kalibrace OK"; const char MSG_HOMEYZ_DONE_IT[] PROGMEM = "Calibrazione OK"; const char MSG_HOMEYZ_DONE_ES[] PROGMEM = "Calibracion OK"; const char MSG_HOMEYZ_DONE_PL[] PROGMEM = "Kalibracja OK"; +const char MSG_HOMEYZ_DONE_DE[] PROGMEM = "Kalibrierung OK"; const char * const MSG_HOMEYZ_DONE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_HOMEYZ_DONE_EN, MSG_HOMEYZ_DONE_CZ, MSG_HOMEYZ_DONE_IT, MSG_HOMEYZ_DONE_ES, - MSG_HOMEYZ_DONE_PL + MSG_HOMEYZ_DONE_PL, + MSG_HOMEYZ_DONE_DE }; const char MSG_HOMEYZ_PROGRESS_EN[] PROGMEM = "Calibrating Z"; @@ -990,12 +1111,14 @@ const char MSG_HOMEYZ_PROGRESS_CZ[] PROGMEM = "Kalibruji Z"; const char MSG_HOMEYZ_PROGRESS_IT[] PROGMEM = "Calibrando Z"; const char MSG_HOMEYZ_PROGRESS_ES[] PROGMEM = "Calibrando Z"; const char MSG_HOMEYZ_PROGRESS_PL[] PROGMEM = "Kalibruje Z"; +const char MSG_HOMEYZ_PROGRESS_DE[] PROGMEM = "Kalibriere Z"; const char * const MSG_HOMEYZ_PROGRESS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_HOMEYZ_PROGRESS_EN, MSG_HOMEYZ_PROGRESS_CZ, MSG_HOMEYZ_PROGRESS_IT, MSG_HOMEYZ_PROGRESS_ES, - MSG_HOMEYZ_PROGRESS_PL + MSG_HOMEYZ_PROGRESS_PL, + MSG_HOMEYZ_PROGRESS_DE }; const char MSG_HOTEND_OFFSET_EN[] PROGMEM = "Hotend offsets:"; @@ -1008,12 +1131,14 @@ const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ[] PROGMEM = "Zlepsuji presno const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_IT[] PROGMEM = "Perfezion. il letto punto di calibraz."; const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_ES[] PROGMEM = "Mejorando cama punto de calibracion"; const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_PL[] PROGMEM = "Poprawiam precyzyjnosc punktu kalibracyjnego"; +const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE[] PROGMEM = "Verbesserung Bed Kalibrierpunkt"; const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_EN, MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_CZ, MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_IT, MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_ES, - MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_PL + MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_PL, + MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1_DE }; const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_EN[] PROGMEM = " of 9"; @@ -1021,12 +1146,14 @@ const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_CZ[] PROGMEM = " z 9"; const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_IT[] PROGMEM = " su 9"; const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_ES[] PROGMEM = " de 9"; const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_PL[] PROGMEM = " z 9"; +const char MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_DE[] PROGMEM = " von 9"; const char * const MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_EN, MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_CZ, MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_IT, MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_ES, - MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_PL + MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_PL, + MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2_DE }; const char MSG_INIT_SDCARD_EN[] PROGMEM = "Init. SD card"; @@ -1037,14 +1164,16 @@ const char * const MSG_INIT_SDCARD_LANG_TABLE[1] PROGMEM = { const char MSG_INSERT_FILAMENT_EN[] PROGMEM = "Insert filament"; const char MSG_INSERT_FILAMENT_CZ[] PROGMEM = "Vlozte filament"; const char MSG_INSERT_FILAMENT_IT[] PROGMEM = "Inserire filamento"; -const char MSG_INSERT_FILAMENT_ES[] PROGMEM = "Inserta filamento"; +const char MSG_INSERT_FILAMENT_ES[] PROGMEM = "Introducir filamento"; const char MSG_INSERT_FILAMENT_PL[] PROGMEM = "Wprowadz filament"; +const char MSG_INSERT_FILAMENT_DE[] PROGMEM = "Filament einlegen"; const char * const MSG_INSERT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_INSERT_FILAMENT_EN, MSG_INSERT_FILAMENT_CZ, MSG_INSERT_FILAMENT_IT, MSG_INSERT_FILAMENT_ES, - MSG_INSERT_FILAMENT_PL + MSG_INSERT_FILAMENT_PL, + MSG_INSERT_FILAMENT_DE }; const char MSG_INVALID_EXTRUDER_EN[] PROGMEM = "Invalid extruder"; @@ -1054,12 +1183,13 @@ const char * const MSG_INVALID_EXTRUDER_LANG_TABLE[1] PROGMEM = { const char MSG_KILLED_EN[] PROGMEM = "KILLED. "; const char MSG_KILLED_IT[] PROGMEM = "IN TILT."; -const char MSG_KILLED_ES[] PROGMEM = "PARADA DE EMERG."; +const char MSG_KILLED_ES[] PROGMEM = "PARADA DE EMERGENCIA"; const char * const MSG_KILLED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_KILLED_EN, MSG_KILLED_EN, MSG_KILLED_IT, MSG_KILLED_ES, + MSG_KILLED_EN, MSG_KILLED_EN }; @@ -1068,51 +1198,59 @@ const char MSG_LANGUAGE_NAME_CZ[] PROGMEM = "Cestina"; const char MSG_LANGUAGE_NAME_IT[] PROGMEM = "Italiano"; const char MSG_LANGUAGE_NAME_ES[] PROGMEM = "Espanol"; const char MSG_LANGUAGE_NAME_PL[] PROGMEM = "Polski"; +const char MSG_LANGUAGE_NAME_DE[] PROGMEM = "Deutsch"; const char * const MSG_LANGUAGE_NAME_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_LANGUAGE_NAME_EN, MSG_LANGUAGE_NAME_CZ, MSG_LANGUAGE_NAME_IT, MSG_LANGUAGE_NAME_ES, - MSG_LANGUAGE_NAME_PL + MSG_LANGUAGE_NAME_PL, + MSG_LANGUAGE_NAME_DE }; const char MSG_LANGUAGE_SELECT_EN[] PROGMEM = "Select language"; const char MSG_LANGUAGE_SELECT_CZ[] PROGMEM = "Vyber jazyka"; const char MSG_LANGUAGE_SELECT_IT[] PROGMEM = "Seleziona lingua"; -const char MSG_LANGUAGE_SELECT_ES[] PROGMEM = "Cambia la lengua "; +const char MSG_LANGUAGE_SELECT_ES[] PROGMEM = "Cambiae el idioma"; const char MSG_LANGUAGE_SELECT_PL[] PROGMEM = "Wybor jezyka"; +const char MSG_LANGUAGE_SELECT_DE[] PROGMEM = "Waehle Sprache"; const char * const MSG_LANGUAGE_SELECT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_LANGUAGE_SELECT_EN, MSG_LANGUAGE_SELECT_CZ, MSG_LANGUAGE_SELECT_IT, MSG_LANGUAGE_SELECT_ES, - MSG_LANGUAGE_SELECT_PL + MSG_LANGUAGE_SELECT_PL, + MSG_LANGUAGE_SELECT_DE }; const char MSG_LOADING_COLOR_EN[] PROGMEM = "Loading color"; const char MSG_LOADING_COLOR_CZ[] PROGMEM = "Cisteni barvy"; const char MSG_LOADING_COLOR_IT[] PROGMEM = "Caricando colore"; -const char MSG_LOADING_COLOR_ES[] PROGMEM = "Cargando color"; +const char MSG_LOADING_COLOR_ES[] PROGMEM = "Cambiando color"; const char MSG_LOADING_COLOR_PL[] PROGMEM = "Czyszcz. koloru"; +const char MSG_LOADING_COLOR_DE[] PROGMEM = "Lade Farbe"; const char * const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_LOADING_COLOR_EN, MSG_LOADING_COLOR_CZ, MSG_LOADING_COLOR_IT, MSG_LOADING_COLOR_ES, - MSG_LOADING_COLOR_PL + MSG_LOADING_COLOR_PL, + MSG_LOADING_COLOR_DE }; const char MSG_LOADING_FILAMENT_EN[] PROGMEM = "Loading filament"; const char MSG_LOADING_FILAMENT_CZ[] PROGMEM = "Zavadeni filamentu"; const char MSG_LOADING_FILAMENT_IT[] PROGMEM = "Caricando filam."; -const char MSG_LOADING_FILAMENT_ES[] PROGMEM = "Cargando fil."; +const char MSG_LOADING_FILAMENT_ES[] PROGMEM = "Introduciendo filam."; const char MSG_LOADING_FILAMENT_PL[] PROGMEM = "Wprow. filamentu"; +const char MSG_LOADING_FILAMENT_DE[] PROGMEM = "Filament-Eifuehrung"; const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_LOADING_FILAMENT_EN, MSG_LOADING_FILAMENT_CZ, MSG_LOADING_FILAMENT_IT, MSG_LOADING_FILAMENT_ES, - MSG_LOADING_FILAMENT_PL + MSG_LOADING_FILAMENT_PL, + MSG_LOADING_FILAMENT_DE }; const char MSG_LOAD_EPROM_EN[] PROGMEM = "Load memory"; @@ -1123,14 +1261,16 @@ const char * const MSG_LOAD_EPROM_LANG_TABLE[1] PROGMEM = { const char MSG_LOAD_FILAMENT_EN[] PROGMEM = "Load filament"; const char MSG_LOAD_FILAMENT_CZ[] PROGMEM = "Zavest filament"; const char MSG_LOAD_FILAMENT_IT[] PROGMEM = "Carica filamento"; -const char MSG_LOAD_FILAMENT_ES[] PROGMEM = "Poner filamento"; +const char MSG_LOAD_FILAMENT_ES[] PROGMEM = "Introducir filam."; const char MSG_LOAD_FILAMENT_PL[] PROGMEM = "Wprowadz filament"; +const char MSG_LOAD_FILAMENT_DE[] PROGMEM = "Lege Filament ein"; const char * const MSG_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_LOAD_FILAMENT_EN, MSG_LOAD_FILAMENT_CZ, MSG_LOAD_FILAMENT_IT, MSG_LOAD_FILAMENT_ES, - MSG_LOAD_FILAMENT_PL + MSG_LOAD_FILAMENT_PL, + MSG_LOAD_FILAMENT_DE }; const char MSG_LOOSE_PULLEY_EN[] PROGMEM = "Loose pulley"; @@ -1138,12 +1278,14 @@ const char MSG_LOOSE_PULLEY_CZ[] PROGMEM = "Uvolnena remenicka"; const char MSG_LOOSE_PULLEY_IT[] PROGMEM = "Puleggia lenta"; const char MSG_LOOSE_PULLEY_ES[] PROGMEM = "Polea suelta"; const char MSG_LOOSE_PULLEY_PL[] PROGMEM = "Kolo pasowe"; +const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Lose Riemenschei."; const char * const MSG_LOOSE_PULLEY_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_LOOSE_PULLEY_EN, MSG_LOOSE_PULLEY_CZ, MSG_LOOSE_PULLEY_IT, MSG_LOOSE_PULLEY_ES, - MSG_LOOSE_PULLEY_PL + MSG_LOOSE_PULLEY_PL, + MSG_LOOSE_PULLEY_DE }; const char MSG_M104_INVALID_EXTRUDER_EN[] PROGMEM = "M104 Invalid extruder "; @@ -1191,12 +1333,14 @@ const char MSG_MAIN_CZ[] PROGMEM = "Hlavni nabidka"; const char MSG_MAIN_IT[] PROGMEM = "Menu principale"; const char MSG_MAIN_ES[] PROGMEM = "Menu principal"; const char MSG_MAIN_PL[] PROGMEM = "Menu glowne"; +const char MSG_MAIN_DE[] PROGMEM = "Hauptmenue"; const char * const MSG_MAIN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MAIN_EN, MSG_MAIN_CZ, MSG_MAIN_IT, MSG_MAIN_ES, - MSG_MAIN_PL + MSG_MAIN_PL, + MSG_MAIN_DE }; const char MSG_MARK_FIL_EN[] PROGMEM = "Mark filament 100mm from extruder body. Click when done."; @@ -1204,12 +1348,14 @@ const char MSG_MARK_FIL_CZ[] PROGMEM = "Oznacte filament 100 mm od tela extruder const char MSG_MARK_FIL_IT[] PROGMEM = "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare."; const char MSG_MARK_FIL_ES[] PROGMEM = "Marque el filamento 100 mm por encima del final del extrusor. Hacer clic una vez terminado."; const char MSG_MARK_FIL_PL[] PROGMEM = "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem."; +const char MSG_MARK_FIL_DE[] PROGMEM = "Markier Filament 100mm vom Extrudergehaeuse. Klicken wenn Fertig."; const char * const MSG_MARK_FIL_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MARK_FIL_EN, MSG_MARK_FIL_CZ, MSG_MARK_FIL_IT, MSG_MARK_FIL_ES, - MSG_MARK_FIL_PL + MSG_MARK_FIL_PL, + MSG_MARK_FIL_DE }; const char MSG_MAX_EN[] PROGMEM = " \002 Max"; @@ -1222,12 +1368,14 @@ const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ[] PROGMEM = "Merim referenc const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_IT[] PROGMEM = "Misurare l'altezza di riferimento del punto di calibrazione"; const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_ES[] PROGMEM = "Medir la altura del punto de la calibracion"; const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_PL[] PROGMEM = "Okreslam wysokosc odniesienia punktu kalibracyjnego"; +const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_DE[] PROGMEM = "Messen der Referenzhoehe des Kalibrierpunktes"; const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN, MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ, MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_IT, MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_ES, - MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_PL + MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_PL, + MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_DE }; const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_EN[] PROGMEM = " of 9"; @@ -1235,12 +1383,14 @@ const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_CZ[] PROGMEM = " z 9"; const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_IT[] PROGMEM = " su 9"; const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_ES[] PROGMEM = " de 9"; const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_PL[] PROGMEM = " z 9"; +const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_DE[] PROGMEM = " von 9"; const char * const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_EN, MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_CZ, MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_IT, MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_ES, - MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_PL + MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_PL, + MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_DE }; const char MSG_MENU_CALIBRATION_EN[] PROGMEM = "Calibration"; @@ -1248,12 +1398,14 @@ const char MSG_MENU_CALIBRATION_CZ[] PROGMEM = "Kalibrace"; const char MSG_MENU_CALIBRATION_IT[] PROGMEM = "Calibrazione"; const char MSG_MENU_CALIBRATION_ES[] PROGMEM = "Calibracion"; const char MSG_MENU_CALIBRATION_PL[] PROGMEM = "Kalibracja"; +const char MSG_MENU_CALIBRATION_DE[] PROGMEM = "Kalibrierung"; const char * const MSG_MENU_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MENU_CALIBRATION_EN, MSG_MENU_CALIBRATION_CZ, MSG_MENU_CALIBRATION_IT, MSG_MENU_CALIBRATION_ES, - MSG_MENU_CALIBRATION_PL + MSG_MENU_CALIBRATION_PL, + MSG_MENU_CALIBRATION_DE }; const char MSG_MESH_BED_LEVELING_EN[] PROGMEM = "Mesh Bed Leveling"; @@ -1263,6 +1415,7 @@ const char * const MSG_MESH_BED_LEVELING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MESH_BED_LEVELING_EN, MSG_MESH_BED_LEVELING_IT, MSG_MESH_BED_LEVELING_EN, + MSG_MESH_BED_LEVELING_EN, MSG_MESH_BED_LEVELING_EN }; @@ -1296,12 +1449,14 @@ const char MSG_MOVE_AXIS_CZ[] PROGMEM = "Posunout osu"; const char MSG_MOVE_AXIS_IT[] PROGMEM = "Muovi asse"; const char MSG_MOVE_AXIS_ES[] PROGMEM = "Mover ejes"; const char MSG_MOVE_AXIS_PL[] PROGMEM = "Ruch osi"; +const char MSG_MOVE_AXIS_DE[] PROGMEM = "Bewege Achse"; const char * const MSG_MOVE_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_AXIS_EN, MSG_MOVE_AXIS_CZ, MSG_MOVE_AXIS_IT, MSG_MOVE_AXIS_ES, - MSG_MOVE_AXIS_PL + MSG_MOVE_AXIS_PL, + MSG_MOVE_AXIS_DE }; const char MSG_MOVE_CARRIAGE_TO_THE_TOP_EN[] PROGMEM = "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."; @@ -1309,12 +1464,14 @@ const char MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ[] PROGMEM = "Kalibrace XYZ. Otacenim const char MSG_MOVE_CARRIAGE_TO_THE_TOP_IT[] PROGMEM = "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."; const char MSG_MOVE_CARRIAGE_TO_THE_TOP_ES[] PROGMEM = "Calibrando XYZ. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic."; const char MSG_MOVE_CARRIAGE_TO_THE_TOP_PL[] PROGMEM = "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."; +const char MSG_MOVE_CARRIAGE_TO_THE_TOP_DE[] PROGMEM = "Kalibrieren von XYZ. Drehen Sie den Knopf, um den Z-Schlitten bis zum Anschlag zu bewegen. Klicken wenn fertig."; const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_CARRIAGE_TO_THE_TOP_EN, MSG_MOVE_CARRIAGE_TO_THE_TOP_CZ, MSG_MOVE_CARRIAGE_TO_THE_TOP_IT, MSG_MOVE_CARRIAGE_TO_THE_TOP_ES, - MSG_MOVE_CARRIAGE_TO_THE_TOP_PL + MSG_MOVE_CARRIAGE_TO_THE_TOP_PL, + MSG_MOVE_CARRIAGE_TO_THE_TOP_DE }; const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN[] PROGMEM = "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."; @@ -1322,22 +1479,25 @@ const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ[] PROGMEM = "Kalibrace Z. Otacenim const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_IT[] PROGMEM = "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."; const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_ES[] PROGMEM = "Calibrando Z. Gira el boton para subir el carro Z hasta golpe piezas superioras. Despues haz clic."; const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_PL[] PROGMEM = "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."; +const char MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE[] PROGMEM = "Kalibrieren von Z. Drehen Sie den Knopf, um den Z-Schlitten bis zum Anschlag zu bewegen. Klicken wenn fertig."; const char * const MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_EN, MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_CZ, MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_IT, MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_ES, - MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_PL + MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_PL, + MSG_MOVE_CARRIAGE_TO_THE_TOP_Z_DE }; const char MSG_MOVE_E_EN[] PROGMEM = "Extruder"; const char MSG_MOVE_E_IT[] PROGMEM = "Muovi Estrusore"; -const char MSG_MOVE_E_ES[] PROGMEM = "Extrusor"; +const char MSG_MOVE_E_ES[] PROGMEM = "Extruir"; const char * const MSG_MOVE_E_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_E_EN, MSG_MOVE_E_EN, MSG_MOVE_E_IT, MSG_MOVE_E_ES, + MSG_MOVE_E_EN, MSG_MOVE_E_EN }; @@ -1346,12 +1506,14 @@ const char MSG_MOVE_X_CZ[] PROGMEM = "Posunout X"; const char MSG_MOVE_X_IT[] PROGMEM = "Muovi X"; const char MSG_MOVE_X_ES[] PROGMEM = "Mover X"; const char MSG_MOVE_X_PL[] PROGMEM = "Przesunac X"; +const char MSG_MOVE_X_DE[] PROGMEM = "Bewege X"; const char * const MSG_MOVE_X_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_X_EN, MSG_MOVE_X_CZ, MSG_MOVE_X_IT, MSG_MOVE_X_ES, - MSG_MOVE_X_PL + MSG_MOVE_X_PL, + MSG_MOVE_X_DE }; const char MSG_MOVE_Y_EN[] PROGMEM = "Move Y"; @@ -1359,12 +1521,14 @@ const char MSG_MOVE_Y_CZ[] PROGMEM = "Posunout Y"; const char MSG_MOVE_Y_IT[] PROGMEM = "Muovi Y"; const char MSG_MOVE_Y_ES[] PROGMEM = "Mover Y"; const char MSG_MOVE_Y_PL[] PROGMEM = "Przesunac Y"; +const char MSG_MOVE_Y_DE[] PROGMEM = "Bewege Y"; const char * const MSG_MOVE_Y_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_Y_EN, MSG_MOVE_Y_CZ, MSG_MOVE_Y_IT, MSG_MOVE_Y_ES, - MSG_MOVE_Y_PL + MSG_MOVE_Y_PL, + MSG_MOVE_Y_DE }; const char MSG_MOVE_Z_EN[] PROGMEM = "Move Z"; @@ -1372,12 +1536,14 @@ const char MSG_MOVE_Z_CZ[] PROGMEM = "Posunout Z"; const char MSG_MOVE_Z_IT[] PROGMEM = "Muovi Z"; const char MSG_MOVE_Z_ES[] PROGMEM = "Mover Z"; const char MSG_MOVE_Z_PL[] PROGMEM = "Przesunac Z"; +const char MSG_MOVE_Z_DE[] PROGMEM = "Bewege Z"; const char * const MSG_MOVE_Z_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_MOVE_Z_EN, MSG_MOVE_Z_CZ, MSG_MOVE_Z_IT, MSG_MOVE_Z_ES, - MSG_MOVE_Z_PL + MSG_MOVE_Z_PL, + MSG_MOVE_Z_DE }; const char MSG_NEW_FIRMWARE_AVAILABLE_EN[] PROGMEM = "New firmware version available:"; @@ -1385,12 +1551,14 @@ const char MSG_NEW_FIRMWARE_AVAILABLE_CZ[] PROGMEM = "Vysla nova verze firmware: const char MSG_NEW_FIRMWARE_AVAILABLE_IT[] PROGMEM = "Nuova versione del firmware disponibile"; const char MSG_NEW_FIRMWARE_AVAILABLE_ES[] PROGMEM = "Nuevo firmware disponible:"; const char MSG_NEW_FIRMWARE_AVAILABLE_PL[] PROGMEM = "Wyszla nowa wersja firmware:"; +const char MSG_NEW_FIRMWARE_AVAILABLE_DE[] PROGMEM = "Neue Firmware Version verfuegbar:"; const char * const MSG_NEW_FIRMWARE_AVAILABLE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NEW_FIRMWARE_AVAILABLE_EN, MSG_NEW_FIRMWARE_AVAILABLE_CZ, MSG_NEW_FIRMWARE_AVAILABLE_IT, MSG_NEW_FIRMWARE_AVAILABLE_ES, - MSG_NEW_FIRMWARE_AVAILABLE_PL + MSG_NEW_FIRMWARE_AVAILABLE_PL, + MSG_NEW_FIRMWARE_AVAILABLE_DE }; const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_EN[] PROGMEM = "Please upgrade."; @@ -1398,62 +1566,72 @@ const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_CZ[] PROGMEM = "Prosim aktualizujte." const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_IT[] PROGMEM = "Prega aggiorna."; const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_ES[] PROGMEM = "Actualizar por favor"; const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_PL[] PROGMEM = "Prosze zaktualizowac"; +const char MSG_NEW_FIRMWARE_PLEASE_UPGRADE_DE[] PROGMEM = "Bitte aktualisieren."; const char * const MSG_NEW_FIRMWARE_PLEASE_UPGRADE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NEW_FIRMWARE_PLEASE_UPGRADE_EN, MSG_NEW_FIRMWARE_PLEASE_UPGRADE_CZ, MSG_NEW_FIRMWARE_PLEASE_UPGRADE_IT, MSG_NEW_FIRMWARE_PLEASE_UPGRADE_ES, - MSG_NEW_FIRMWARE_PLEASE_UPGRADE_PL + MSG_NEW_FIRMWARE_PLEASE_UPGRADE_PL, + MSG_NEW_FIRMWARE_PLEASE_UPGRADE_DE }; const char MSG_NO_EN[] PROGMEM = "No"; const char MSG_NO_CZ[] PROGMEM = "Ne"; const char MSG_NO_PL[] PROGMEM = "Nie"; +const char MSG_NO_DE[] PROGMEM = "Nein"; const char * const MSG_NO_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NO_EN, MSG_NO_CZ, MSG_NO_EN, MSG_NO_EN, - MSG_NO_PL + MSG_NO_PL, + MSG_NO_DE }; const char MSG_NOT_COLOR_EN[] PROGMEM = "Color not clear"; const char MSG_NOT_COLOR_CZ[] PROGMEM = "Barva neni cista"; const char MSG_NOT_COLOR_IT[] PROGMEM = "Colore non puro"; -const char MSG_NOT_COLOR_ES[] PROGMEM = "Color no claro"; +const char MSG_NOT_COLOR_ES[] PROGMEM = "Color no homogeneo"; const char MSG_NOT_COLOR_PL[] PROGMEM = "Kolor zanieczysz."; +const char MSG_NOT_COLOR_DE[] PROGMEM = "Farbe nicht klar"; const char * const MSG_NOT_COLOR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NOT_COLOR_EN, MSG_NOT_COLOR_CZ, MSG_NOT_COLOR_IT, MSG_NOT_COLOR_ES, - MSG_NOT_COLOR_PL + MSG_NOT_COLOR_PL, + MSG_NOT_COLOR_DE }; const char MSG_NOT_LOADED_EN[] PROGMEM = "Filament not loaded"; const char MSG_NOT_LOADED_CZ[] PROGMEM = "Filament nezaveden"; const char MSG_NOT_LOADED_IT[] PROGMEM = "Fil. non caricato"; -const char MSG_NOT_LOADED_ES[] PROGMEM = "Fil. no cargado"; +const char MSG_NOT_LOADED_ES[] PROGMEM = "Fil. no introducido"; const char MSG_NOT_LOADED_PL[] PROGMEM = "Brak filamentu"; +const char MSG_NOT_LOADED_DE[] PROGMEM = "Filam. nicht geladen"; const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NOT_LOADED_EN, MSG_NOT_LOADED_CZ, MSG_NOT_LOADED_IT, MSG_NOT_LOADED_ES, - MSG_NOT_LOADED_PL + MSG_NOT_LOADED_PL, + MSG_NOT_LOADED_DE }; const char MSG_NOZZLE_EN[] PROGMEM = "Nozzle"; const char MSG_NOZZLE_CZ[] PROGMEM = "Tryska"; const char MSG_NOZZLE_IT[] PROGMEM = "Ugello"; -const char MSG_NOZZLE_ES[] PROGMEM = "Fusor"; +const char MSG_NOZZLE_ES[] PROGMEM = "Boquilla"; const char MSG_NOZZLE_PL[] PROGMEM = "Dysza"; +const char MSG_NOZZLE_DE[] PROGMEM = "Duese"; const char * const MSG_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NOZZLE_EN, MSG_NOZZLE_CZ, MSG_NOZZLE_IT, MSG_NOZZLE_ES, - MSG_NOZZLE_PL + MSG_NOZZLE_PL, + MSG_NOZZLE_DE }; const char MSG_NOZZLE1_EN[] PROGMEM = "Nozzle2"; @@ -1471,23 +1649,27 @@ const char MSG_NO_CARD_CZ[] PROGMEM = "Zadna SD karta"; const char MSG_NO_CARD_IT[] PROGMEM = "Nessuna SD"; const char MSG_NO_CARD_ES[] PROGMEM = "No hay tarjeta SD"; const char MSG_NO_CARD_PL[] PROGMEM = "Brak karty SD"; +const char MSG_NO_CARD_DE[] PROGMEM = "Keine SD Karte"; const char * const MSG_NO_CARD_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NO_CARD_EN, MSG_NO_CARD_CZ, MSG_NO_CARD_IT, MSG_NO_CARD_ES, - MSG_NO_CARD_PL + MSG_NO_CARD_PL, + MSG_NO_CARD_DE }; const char MSG_NO_MOVE_EN[] PROGMEM = "No move."; const char MSG_NO_MOVE_IT[] PROGMEM = "Nessun movimento."; const char MSG_NO_MOVE_ES[] PROGMEM = "Sin movimiento"; +const char MSG_NO_MOVE_DE[] PROGMEM = "Keine Bewegung."; const char * const MSG_NO_MOVE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_NO_MOVE_EN, MSG_NO_MOVE_EN, MSG_NO_MOVE_IT, MSG_NO_MOVE_ES, - MSG_NO_MOVE_EN + MSG_NO_MOVE_EN, + MSG_NO_MOVE_DE }; const char MSG_OFF_EN[] PROGMEM = "Off"; @@ -1507,12 +1689,17 @@ const char * const MSG_ON_LANG_TABLE[1] PROGMEM = { const char MSG_PAPER_EN[] PROGMEM = "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."; const char MSG_PAPER_CZ[] PROGMEM = "Umistete list papiru na podlozku a udrzujte jej pod tryskou behem mereni prvnich 4 bodu. Pokud tryska zachyti papir, vypnete tiskarnu."; +const char MSG_PAPER_IT[] PROGMEM = "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."; +const char MSG_PAPER_ES[] PROGMEM = "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."; +const char MSG_PAPER_PL[] PROGMEM = "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."; +const char MSG_PAPER_DE[] PROGMEM = "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einfaengt, Drucker sofort ausschalten"; const char * const MSG_PAPER_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PAPER_EN, MSG_PAPER_CZ, - MSG_PAPER_EN, - MSG_PAPER_EN, - MSG_PAPER_EN + MSG_PAPER_IT, + MSG_PAPER_ES, + MSG_PAPER_PL, + MSG_PAPER_DE }; const char MSG_PAUSE_PRINT_EN[] PROGMEM = "Pause print"; @@ -1520,24 +1707,28 @@ const char MSG_PAUSE_PRINT_CZ[] PROGMEM = "Pozastavit tisk"; const char MSG_PAUSE_PRINT_IT[] PROGMEM = "Metti in pausa"; const char MSG_PAUSE_PRINT_ES[] PROGMEM = "Pausar impresion"; const char MSG_PAUSE_PRINT_PL[] PROGMEM = "Przerwac druk"; +const char MSG_PAUSE_PRINT_DE[] PROGMEM = "Druck aussetzen"; const char * const MSG_PAUSE_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PAUSE_PRINT_EN, MSG_PAUSE_PRINT_CZ, MSG_PAUSE_PRINT_IT, MSG_PAUSE_PRINT_ES, - MSG_PAUSE_PRINT_PL + MSG_PAUSE_PRINT_PL, + MSG_PAUSE_PRINT_DE }; const char MSG_PICK_Z_EN[] PROGMEM = "Pick print"; const char MSG_PICK_Z_CZ[] PROGMEM = "Vyberte vytisk"; -const char MSG_PICK_Z_ES[] PROGMEM = "Vyberte vytisk"; +const char MSG_PICK_Z_ES[] PROGMEM = "Esc. Modelo Adecuado"; const char MSG_PICK_Z_PL[] PROGMEM = "Vyberte vytisk"; +const char MSG_PICK_Z_DE[] PROGMEM = "Waehle Abdruck"; const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PICK_Z_EN, MSG_PICK_Z_CZ, MSG_PICK_Z_EN, MSG_PICK_Z_ES, - MSG_PICK_Z_PL + MSG_PICK_Z_PL, + MSG_PICK_Z_DE }; const char MSG_PLANNER_BUFFER_BYTES_EN[] PROGMEM = " PlannerBufferBytes: "; @@ -1548,14 +1739,16 @@ const char * const MSG_PLANNER_BUFFER_BYTES_LANG_TABLE[1] PROGMEM = { const char MSG_PLEASE_WAIT_EN[] PROGMEM = "Please wait"; const char MSG_PLEASE_WAIT_CZ[] PROGMEM = "Prosim cekejte"; const char MSG_PLEASE_WAIT_IT[] PROGMEM = "Aspetta"; -const char MSG_PLEASE_WAIT_ES[] PROGMEM = "Espera"; +const char MSG_PLEASE_WAIT_ES[] PROGMEM = "Por Favor Esperar"; const char MSG_PLEASE_WAIT_PL[] PROGMEM = "Prosze czekac"; +const char MSG_PLEASE_WAIT_DE[] PROGMEM = "Bitte warten"; const char * const MSG_PLEASE_WAIT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PLEASE_WAIT_EN, MSG_PLEASE_WAIT_CZ, MSG_PLEASE_WAIT_IT, MSG_PLEASE_WAIT_ES, - MSG_PLEASE_WAIT_PL + MSG_PLEASE_WAIT_PL, + MSG_PLEASE_WAIT_DE }; const char MSG_POSITION_UNKNOWN_EN[] PROGMEM = "Home X/Y before Z"; @@ -1573,50 +1766,59 @@ const char MSG_PREHEAT_CZ[] PROGMEM = "Predehrev"; const char MSG_PREHEAT_IT[] PROGMEM = "Preriscalda"; const char MSG_PREHEAT_ES[] PROGMEM = "Precalentar"; const char MSG_PREHEAT_PL[] PROGMEM = "Grzanie"; +const char MSG_PREHEAT_DE[] PROGMEM = "Vorwaermen"; const char * const MSG_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PREHEAT_EN, MSG_PREHEAT_CZ, MSG_PREHEAT_IT, MSG_PREHEAT_ES, - MSG_PREHEAT_PL + MSG_PREHEAT_PL, + MSG_PREHEAT_DE }; const char MSG_PREHEAT_NOZZLE_EN[] PROGMEM = "Preheat the nozzle!"; const char MSG_PREHEAT_NOZZLE_CZ[] PROGMEM = "Predehrejte trysku!"; const char MSG_PREHEAT_NOZZLE_IT[] PROGMEM = "Preris. ugello!"; -const char MSG_PREHEAT_NOZZLE_ES[] PROGMEM = "Precal. extrusor!"; +const char MSG_PREHEAT_NOZZLE_ES[] PROGMEM = "Precalentar extrusor"; const char MSG_PREHEAT_NOZZLE_PL[] PROGMEM = "Nagrzej dysze!"; +const char MSG_PREHEAT_NOZZLE_DE[] PROGMEM = "Worwaermen Duese"; const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PREHEAT_NOZZLE_EN, MSG_PREHEAT_NOZZLE_CZ, MSG_PREHEAT_NOZZLE_IT, MSG_PREHEAT_NOZZLE_ES, - MSG_PREHEAT_NOZZLE_PL + MSG_PREHEAT_NOZZLE_PL, + MSG_PREHEAT_NOZZLE_DE }; const char MSG_PRESS_EN[] PROGMEM = "and press the knob"; const char MSG_PRESS_CZ[] PROGMEM = "a stisknete tlacitko"; const char MSG_PRESS_IT[] PROGMEM = "e cliccare manopola"; -const char MSG_PRESS_ES[] PROGMEM = "y pulse el mando"; +const char MSG_PRESS_ES[] PROGMEM = "Pulsar el mando"; const char MSG_PRESS_PL[] PROGMEM = "Nacisnij przycisk"; +const char MSG_PRESS_DE[] PROGMEM = "und Knopf druecken"; const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PRESS_EN, MSG_PRESS_CZ, MSG_PRESS_IT, MSG_PRESS_ES, - MSG_PRESS_PL + MSG_PRESS_PL, + MSG_PRESS_DE }; const char MSG_PRINT_ABORTED_EN[] PROGMEM = "Print aborted"; const char MSG_PRINT_ABORTED_CZ[] PROGMEM = "Tisk prerusen"; const char MSG_PRINT_ABORTED_IT[] PROGMEM = "Stampa abortita"; +const char MSG_PRINT_ABORTED_ES[] PROGMEM = "Impresion cancelada"; const char MSG_PRINT_ABORTED_PL[] PROGMEM = "Druk przerwany"; +const char MSG_PRINT_ABORTED_DE[] PROGMEM = "Druck abgebrochen"; const char * const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PRINT_ABORTED_EN, MSG_PRINT_ABORTED_CZ, MSG_PRINT_ABORTED_IT, - MSG_PRINT_ABORTED_EN, - MSG_PRINT_ABORTED_PL + MSG_PRINT_ABORTED_ES, + MSG_PRINT_ABORTED_PL, + MSG_PRINT_ABORTED_DE }; const char MSG_PRUSA3D_EN[] PROGMEM = "prusa3d.com"; @@ -1627,7 +1829,8 @@ const char * const MSG_PRUSA3D_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PRUSA3D_CZ, MSG_PRUSA3D_EN, MSG_PRUSA3D_EN, - MSG_PRUSA3D_PL + MSG_PRUSA3D_PL, + MSG_PRUSA3D_EN }; const char MSG_PRUSA3D_FORUM_EN[] PROGMEM = "forum.prusa3d.com"; @@ -1638,7 +1841,8 @@ const char * const MSG_PRUSA3D_FORUM_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PRUSA3D_FORUM_CZ, MSG_PRUSA3D_FORUM_EN, MSG_PRUSA3D_FORUM_EN, - MSG_PRUSA3D_FORUM_PL + MSG_PRUSA3D_FORUM_PL, + MSG_PRUSA3D_FORUM_EN }; const char MSG_PRUSA3D_HOWTO_EN[] PROGMEM = "howto.prusa3d.com"; @@ -1649,20 +1853,23 @@ const char * const MSG_PRUSA3D_HOWTO_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_PRUSA3D_HOWTO_CZ, MSG_PRUSA3D_HOWTO_EN, MSG_PRUSA3D_HOWTO_EN, - MSG_PRUSA3D_HOWTO_PL + MSG_PRUSA3D_HOWTO_PL, + MSG_PRUSA3D_HOWTO_EN }; const char MSG_REBOOT_EN[] PROGMEM = "Reboot the printer"; const char MSG_REBOOT_CZ[] PROGMEM = "Restartujte tiskarnu"; const char MSG_REBOOT_IT[] PROGMEM = "Riavvia stampante"; -const char MSG_REBOOT_ES[] PROGMEM = "Reiniciar la imp."; +const char MSG_REBOOT_ES[] PROGMEM = "Reiniciar impresora"; const char MSG_REBOOT_PL[] PROGMEM = "Restart drukarki"; +const char MSG_REBOOT_DE[] PROGMEM = "Reboot den Printer"; const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_REBOOT_EN, MSG_REBOOT_CZ, MSG_REBOOT_IT, MSG_REBOOT_ES, - MSG_REBOOT_PL + MSG_REBOOT_PL, + MSG_REBOOT_DE }; const char MSG_RECTRACT_EN[] PROGMEM = "Rectract"; @@ -1695,25 +1902,29 @@ const char MSG_RESUME_PRINT_CZ[] PROGMEM = "Pokracovat"; const char MSG_RESUME_PRINT_IT[] PROGMEM = "Riprendi stampa"; const char MSG_RESUME_PRINT_ES[] PROGMEM = "Reanudar impres."; const char MSG_RESUME_PRINT_PL[] PROGMEM = "Kontynuowac"; +const char MSG_RESUME_PRINT_DE[] PROGMEM = "Fortsetzen"; const char * const MSG_RESUME_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_RESUME_PRINT_EN, MSG_RESUME_PRINT_CZ, MSG_RESUME_PRINT_IT, MSG_RESUME_PRINT_ES, - MSG_RESUME_PRINT_PL + MSG_RESUME_PRINT_PL, + MSG_RESUME_PRINT_DE }; const char MSG_RESUMING_EN[] PROGMEM = "Resuming print"; const char MSG_RESUMING_CZ[] PROGMEM = "Obnoveni tisku"; const char MSG_RESUMING_IT[] PROGMEM = "Riprendi stampa"; -const char MSG_RESUMING_ES[] PROGMEM = "Resumiendo impre."; +const char MSG_RESUMING_ES[] PROGMEM = "Resumiendo impresion"; const char MSG_RESUMING_PL[] PROGMEM = "Wznowienie druku"; +const char MSG_RESUMING_DE[] PROGMEM = "Druck fortgesetzt"; const char * const MSG_RESUMING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_RESUMING_EN, MSG_RESUMING_CZ, MSG_RESUMING_IT, MSG_RESUMING_ES, - MSG_RESUMING_PL + MSG_RESUMING_PL, + MSG_RESUMING_DE }; const char MSG_SD_CANT_ENTER_SUBDIR_EN[] PROGMEM = "Cannot enter subdir: "; @@ -1754,14 +1965,16 @@ const char * const MSG_SD_INIT_FAIL_LANG_TABLE[1] PROGMEM = { const char MSG_SD_INSERTED_EN[] PROGMEM = "Card inserted"; const char MSG_SD_INSERTED_CZ[] PROGMEM = "Karta vlozena"; const char MSG_SD_INSERTED_IT[] PROGMEM = "SD inserita"; -const char MSG_SD_INSERTED_ES[] PROGMEM = "Tarjeta colocada"; +const char MSG_SD_INSERTED_ES[] PROGMEM = "Tarjeta insertada"; const char MSG_SD_INSERTED_PL[] PROGMEM = "Karta wlozona"; +const char MSG_SD_INSERTED_DE[] PROGMEM = "SD eingesetzt"; const char * const MSG_SD_INSERTED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SD_INSERTED_EN, MSG_SD_INSERTED_CZ, MSG_SD_INSERTED_IT, MSG_SD_INSERTED_ES, - MSG_SD_INSERTED_PL + MSG_SD_INSERTED_PL, + MSG_SD_INSERTED_DE }; const char MSG_SD_NOT_PRINTING_EN[] PROGMEM = "Not SD printing"; @@ -1789,12 +2002,14 @@ const char MSG_SD_REMOVED_CZ[] PROGMEM = "Karta vyjmuta"; const char MSG_SD_REMOVED_IT[] PROGMEM = "SD rimossa"; const char MSG_SD_REMOVED_ES[] PROGMEM = "Tarjeta retirada"; const char MSG_SD_REMOVED_PL[] PROGMEM = "Karta wyjeta"; +const char MSG_SD_REMOVED_DE[] PROGMEM = "SD entfernt "; const char * const MSG_SD_REMOVED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SD_REMOVED_EN, MSG_SD_REMOVED_CZ, MSG_SD_REMOVED_IT, MSG_SD_REMOVED_ES, - MSG_SD_REMOVED_PL + MSG_SD_REMOVED_PL, + MSG_SD_REMOVED_DE }; const char MSG_SD_SIZE_EN[] PROGMEM = " Size: "; @@ -1820,12 +2035,14 @@ const char * const MSG_SD_WRITE_TO_FILE_LANG_TABLE[1] PROGMEM = { const char MSG_SELFTEST_EN[] PROGMEM = "Selftest "; const char MSG_SELFTEST_IT[] PROGMEM = "Autotest"; const char MSG_SELFTEST_ES[] PROGMEM = "Autotest"; +const char MSG_SELFTEST_DE[] PROGMEM = "Selbsttest "; const char * const MSG_SELFTEST_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_EN, MSG_SELFTEST_EN, MSG_SELFTEST_IT, MSG_SELFTEST_ES, - MSG_SELFTEST_EN + MSG_SELFTEST_EN, + MSG_SELFTEST_DE }; const char MSG_SELFTEST_BEDHEATER_EN[] PROGMEM = "Bed / Heater"; @@ -1836,6 +2053,7 @@ const char * const MSG_SELFTEST_BEDHEATER_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_BEDHEATER_EN, MSG_SELFTEST_BEDHEATER_IT, MSG_SELFTEST_BEDHEATER_ES, + MSG_SELFTEST_BEDHEATER_EN, MSG_SELFTEST_BEDHEATER_EN }; @@ -1844,12 +2062,14 @@ const char MSG_SELFTEST_CHECK_ALLCORRECT_CZ[] PROGMEM = "Vse OK "; const char MSG_SELFTEST_CHECK_ALLCORRECT_IT[] PROGMEM = "Nessun errore"; const char MSG_SELFTEST_CHECK_ALLCORRECT_ES[] PROGMEM = "Todo bie "; const char MSG_SELFTEST_CHECK_ALLCORRECT_PL[] PROGMEM = "Wszystko OK "; +const char MSG_SELFTEST_CHECK_ALLCORRECT_DE[] PROGMEM = "Alles richtig "; const char * const MSG_SELFTEST_CHECK_ALLCORRECT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_ALLCORRECT_EN, MSG_SELFTEST_CHECK_ALLCORRECT_CZ, MSG_SELFTEST_CHECK_ALLCORRECT_IT, MSG_SELFTEST_CHECK_ALLCORRECT_ES, - MSG_SELFTEST_CHECK_ALLCORRECT_PL + MSG_SELFTEST_CHECK_ALLCORRECT_PL, + MSG_SELFTEST_CHECK_ALLCORRECT_DE }; const char MSG_SELFTEST_CHECK_BED_EN[] PROGMEM = "Checking bed "; @@ -1857,12 +2077,14 @@ const char MSG_SELFTEST_CHECK_BED_CZ[] PROGMEM = "Kontrola bed "; const char MSG_SELFTEST_CHECK_BED_IT[] PROGMEM = "Verifica letto"; const char MSG_SELFTEST_CHECK_BED_ES[] PROGMEM = "Control de cama"; const char MSG_SELFTEST_CHECK_BED_PL[] PROGMEM = "Kontrola bed "; +const char MSG_SELFTEST_CHECK_BED_DE[] PROGMEM = "Pr\x81fe Bed "; const char * const MSG_SELFTEST_CHECK_BED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_BED_EN, MSG_SELFTEST_CHECK_BED_CZ, MSG_SELFTEST_CHECK_BED_IT, MSG_SELFTEST_CHECK_BED_ES, - MSG_SELFTEST_CHECK_BED_PL + MSG_SELFTEST_CHECK_BED_PL, + MSG_SELFTEST_CHECK_BED_DE }; const char MSG_SELFTEST_CHECK_ENDSTOPS_EN[] PROGMEM = "Checking endstops"; @@ -1870,12 +2092,14 @@ const char MSG_SELFTEST_CHECK_ENDSTOPS_CZ[] PROGMEM = "Kontrola endstops"; const char MSG_SELFTEST_CHECK_ENDSTOPS_IT[] PROGMEM = "Verifica finecorsa"; const char MSG_SELFTEST_CHECK_ENDSTOPS_ES[] PROGMEM = "Cont. topes final"; const char MSG_SELFTEST_CHECK_ENDSTOPS_PL[] PROGMEM = "Kontrola endstops"; +const char MSG_SELFTEST_CHECK_ENDSTOPS_DE[] PROGMEM = "Pr\x81fe endstops "; const char * const MSG_SELFTEST_CHECK_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_ENDSTOPS_EN, MSG_SELFTEST_CHECK_ENDSTOPS_CZ, MSG_SELFTEST_CHECK_ENDSTOPS_IT, MSG_SELFTEST_CHECK_ENDSTOPS_ES, - MSG_SELFTEST_CHECK_ENDSTOPS_PL + MSG_SELFTEST_CHECK_ENDSTOPS_PL, + MSG_SELFTEST_CHECK_ENDSTOPS_DE }; const char MSG_SELFTEST_CHECK_HOTEND_EN[] PROGMEM = "Checking hotend "; @@ -1883,12 +2107,14 @@ const char MSG_SELFTEST_CHECK_HOTEND_CZ[] PROGMEM = "Kontrola hotend "; const char MSG_SELFTEST_CHECK_HOTEND_IT[] PROGMEM = "Verifica ugello"; const char MSG_SELFTEST_CHECK_HOTEND_ES[] PROGMEM = "Control hotend "; const char MSG_SELFTEST_CHECK_HOTEND_PL[] PROGMEM = "Kontrola hotend "; +const char MSG_SELFTEST_CHECK_HOTEND_DE[] PROGMEM = "Pr\x81fe hotend "; const char * const MSG_SELFTEST_CHECK_HOTEND_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_HOTEND_EN, MSG_SELFTEST_CHECK_HOTEND_CZ, MSG_SELFTEST_CHECK_HOTEND_IT, MSG_SELFTEST_CHECK_HOTEND_ES, - MSG_SELFTEST_CHECK_HOTEND_PL + MSG_SELFTEST_CHECK_HOTEND_PL, + MSG_SELFTEST_CHECK_HOTEND_DE }; const char MSG_SELFTEST_CHECK_X_EN[] PROGMEM = "Checking X axis "; @@ -1896,12 +2122,14 @@ const char MSG_SELFTEST_CHECK_X_CZ[] PROGMEM = "Kontrola X axis "; const char MSG_SELFTEST_CHECK_X_IT[] PROGMEM = "Verifica asse X"; const char MSG_SELFTEST_CHECK_X_ES[] PROGMEM = "Control del eje X"; const char MSG_SELFTEST_CHECK_X_PL[] PROGMEM = "Kontrola X axis "; +const char MSG_SELFTEST_CHECK_X_DE[] PROGMEM = "Pr\x81fe X Achse "; const char * const MSG_SELFTEST_CHECK_X_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_X_EN, MSG_SELFTEST_CHECK_X_CZ, MSG_SELFTEST_CHECK_X_IT, MSG_SELFTEST_CHECK_X_ES, - MSG_SELFTEST_CHECK_X_PL + MSG_SELFTEST_CHECK_X_PL, + MSG_SELFTEST_CHECK_X_DE }; const char MSG_SELFTEST_CHECK_Y_EN[] PROGMEM = "Checking Y axis "; @@ -1909,12 +2137,14 @@ const char MSG_SELFTEST_CHECK_Y_CZ[] PROGMEM = "Kontrola Y axis "; const char MSG_SELFTEST_CHECK_Y_IT[] PROGMEM = "Verifica asse Y"; const char MSG_SELFTEST_CHECK_Y_ES[] PROGMEM = "Control del eje Y"; const char MSG_SELFTEST_CHECK_Y_PL[] PROGMEM = "Kontrola Y axis "; +const char MSG_SELFTEST_CHECK_Y_DE[] PROGMEM = "Pr\x81fe Y Achse "; const char * const MSG_SELFTEST_CHECK_Y_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_Y_EN, MSG_SELFTEST_CHECK_Y_CZ, MSG_SELFTEST_CHECK_Y_IT, MSG_SELFTEST_CHECK_Y_ES, - MSG_SELFTEST_CHECK_Y_PL + MSG_SELFTEST_CHECK_Y_PL, + MSG_SELFTEST_CHECK_Y_DE }; const char MSG_SELFTEST_CHECK_Z_EN[] PROGMEM = "Checking Z axis "; @@ -1922,12 +2152,14 @@ const char MSG_SELFTEST_CHECK_Z_CZ[] PROGMEM = "Kontrola Z axis "; const char MSG_SELFTEST_CHECK_Z_IT[] PROGMEM = "Verifica asse Z"; const char MSG_SELFTEST_CHECK_Z_ES[] PROGMEM = "Control del eje Z"; const char MSG_SELFTEST_CHECK_Z_PL[] PROGMEM = "Kontrola Z axis "; +const char MSG_SELFTEST_CHECK_Z_DE[] PROGMEM = "Pr\x81fe Z Achse "; const char * const MSG_SELFTEST_CHECK_Z_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_CHECK_Z_EN, MSG_SELFTEST_CHECK_Z_CZ, MSG_SELFTEST_CHECK_Z_IT, MSG_SELFTEST_CHECK_Z_ES, - MSG_SELFTEST_CHECK_Z_PL + MSG_SELFTEST_CHECK_Z_PL, + MSG_SELFTEST_CHECK_Z_DE }; const char MSG_SELFTEST_COOLING_FAN_EN[] PROGMEM = "Front print fan?";; @@ -1935,12 +2167,14 @@ const char MSG_SELFTEST_COOLING_FAN_CZ[] PROGMEM = "Predni tiskovy vent?";; const char MSG_SELFTEST_COOLING_FAN_IT[] PROGMEM = "Vent di stampa ant.?";; const char MSG_SELFTEST_COOLING_FAN_ES[] PROGMEM = "Vent. al frente?";; const char MSG_SELFTEST_COOLING_FAN_PL[] PROGMEM = "Przodni went. druku?";; +const char MSG_SELFTEST_COOLING_FAN_DE[] PROGMEM = "Vord. Frontluefter?"; const char * const MSG_SELFTEST_COOLING_FAN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_COOLING_FAN_EN, MSG_SELFTEST_COOLING_FAN_CZ, MSG_SELFTEST_COOLING_FAN_IT, MSG_SELFTEST_COOLING_FAN_ES, - MSG_SELFTEST_COOLING_FAN_PL + MSG_SELFTEST_COOLING_FAN_PL, + MSG_SELFTEST_COOLING_FAN_DE }; const char MSG_SELFTEST_ENDSTOP_EN[] PROGMEM = "Endstop"; @@ -1951,6 +2185,7 @@ const char * const MSG_SELFTEST_ENDSTOP_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_ENDSTOP_EN, MSG_SELFTEST_ENDSTOP_IT, MSG_SELFTEST_ENDSTOP_ES, + MSG_SELFTEST_ENDSTOP_EN, MSG_SELFTEST_ENDSTOP_EN }; @@ -1962,29 +2197,34 @@ const char * const MSG_SELFTEST_ENDSTOPS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_ENDSTOPS_EN, MSG_SELFTEST_ENDSTOPS_IT, MSG_SELFTEST_ENDSTOPS_ES, + MSG_SELFTEST_ENDSTOPS_EN, MSG_SELFTEST_ENDSTOPS_EN }; const char MSG_SELFTEST_ENDSTOP_NOTHIT_EN[] PROGMEM = "Endstop not hit"; const char MSG_SELFTEST_ENDSTOP_NOTHIT_IT[] PROGMEM = "Finec. fuori por."; const char MSG_SELFTEST_ENDSTOP_NOTHIT_ES[] PROGMEM = "Tope fin. no toc."; +const char MSG_SELFTEST_ENDSTOP_NOTHIT_DE[] PROGMEM = "End nicht getrof."; const char * const MSG_SELFTEST_ENDSTOP_NOTHIT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_ENDSTOP_NOTHIT_EN, MSG_SELFTEST_ENDSTOP_NOTHIT_EN, MSG_SELFTEST_ENDSTOP_NOTHIT_IT, MSG_SELFTEST_ENDSTOP_NOTHIT_ES, - MSG_SELFTEST_ENDSTOP_NOTHIT_EN + MSG_SELFTEST_ENDSTOP_NOTHIT_EN, + MSG_SELFTEST_ENDSTOP_NOTHIT_DE }; const char MSG_SELFTEST_ERROR_EN[] PROGMEM = "Selftest error !"; const char MSG_SELFTEST_ERROR_IT[] PROGMEM = "Autotest negativo"; const char MSG_SELFTEST_ERROR_ES[] PROGMEM = "Autotest error!"; +const char MSG_SELFTEST_ERROR_DE[] PROGMEM = "Selbtest Fehler!"; const char * const MSG_SELFTEST_ERROR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_ERROR_EN, MSG_SELFTEST_ERROR_EN, MSG_SELFTEST_ERROR_IT, MSG_SELFTEST_ERROR_ES, - MSG_SELFTEST_ERROR_EN + MSG_SELFTEST_ERROR_EN, + MSG_SELFTEST_ERROR_DE }; const char MSG_SELFTEST_EXTRUDER_FAN_EN[] PROGMEM = "Left hotend fan?";; @@ -1992,12 +2232,14 @@ const char MSG_SELFTEST_EXTRUDER_FAN_CZ[] PROGMEM = "Levy vent na trysce?";; const char MSG_SELFTEST_EXTRUDER_FAN_IT[] PROGMEM = "Vent SX sull'ugello?";; const char MSG_SELFTEST_EXTRUDER_FAN_ES[] PROGMEM = "Vent. en la izg?";; const char MSG_SELFTEST_EXTRUDER_FAN_PL[] PROGMEM = "Lewy went na dysze?";; +const char MSG_SELFTEST_EXTRUDER_FAN_DE[] PROGMEM = "Link. Hotendluefter?"; const char * const MSG_SELFTEST_EXTRUDER_FAN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_EXTRUDER_FAN_EN, MSG_SELFTEST_EXTRUDER_FAN_CZ, MSG_SELFTEST_EXTRUDER_FAN_IT, MSG_SELFTEST_EXTRUDER_FAN_ES, - MSG_SELFTEST_EXTRUDER_FAN_PL + MSG_SELFTEST_EXTRUDER_FAN_PL, + MSG_SELFTEST_EXTRUDER_FAN_DE }; const char MSG_SELFTEST_FAILED_EN[] PROGMEM = "Selftest failed "; @@ -2005,12 +2247,14 @@ const char MSG_SELFTEST_FAILED_CZ[] PROGMEM = "Selftest selhal "; const char MSG_SELFTEST_FAILED_IT[] PROGMEM = "Autotest fallito"; const char MSG_SELFTEST_FAILED_ES[] PROGMEM = "Autotest fallado"; const char MSG_SELFTEST_FAILED_PL[] PROGMEM = "Selftest nieudany"; +const char MSG_SELFTEST_FAILED_DE[] PROGMEM = "Selbtest fehlgeschlg"; const char * const MSG_SELFTEST_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_FAILED_EN, MSG_SELFTEST_FAILED_CZ, MSG_SELFTEST_FAILED_IT, MSG_SELFTEST_FAILED_ES, - MSG_SELFTEST_FAILED_PL + MSG_SELFTEST_FAILED_PL, + MSG_SELFTEST_FAILED_DE }; const char MSG_SELFTEST_FAN_EN[] PROGMEM = "Fan test";; @@ -2018,12 +2262,14 @@ const char MSG_SELFTEST_FAN_CZ[] PROGMEM = "Test ventilatoru";; const char MSG_SELFTEST_FAN_IT[] PROGMEM = "Prova del ventilator";; const char MSG_SELFTEST_FAN_ES[] PROGMEM = "Test del ventilador";; const char MSG_SELFTEST_FAN_PL[] PROGMEM = "Test wentylatora";; +const char MSG_SELFTEST_FAN_DE[] PROGMEM = "Lueftertest"; const char * const MSG_SELFTEST_FAN_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_FAN_EN, MSG_SELFTEST_FAN_CZ, MSG_SELFTEST_FAN_IT, MSG_SELFTEST_FAN_ES, - MSG_SELFTEST_FAN_PL + MSG_SELFTEST_FAN_PL, + MSG_SELFTEST_FAN_DE }; const char MSG_SELFTEST_FAN_NO_EN[] PROGMEM = "Not spinning";; @@ -2031,12 +2277,14 @@ const char MSG_SELFTEST_FAN_NO_CZ[] PROGMEM = "Netoci se";; const char MSG_SELFTEST_FAN_NO_IT[] PROGMEM = "Non si gira";; const char MSG_SELFTEST_FAN_NO_ES[] PROGMEM = "Ventilador no gira";; const char MSG_SELFTEST_FAN_NO_PL[] PROGMEM = "Nekreci sie";; +const char MSG_SELFTEST_FAN_NO_DE[] PROGMEM = "Dreht nicht"; const char * const MSG_SELFTEST_FAN_NO_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_FAN_NO_EN, MSG_SELFTEST_FAN_NO_CZ, MSG_SELFTEST_FAN_NO_IT, MSG_SELFTEST_FAN_NO_ES, - MSG_SELFTEST_FAN_NO_PL + MSG_SELFTEST_FAN_NO_PL, + MSG_SELFTEST_FAN_NO_DE }; const char MSG_SELFTEST_FAN_YES_EN[] PROGMEM = "Spinning";; @@ -2044,12 +2292,14 @@ const char MSG_SELFTEST_FAN_YES_CZ[] PROGMEM = "Toci se";; const char MSG_SELFTEST_FAN_YES_IT[] PROGMEM = "Gira";; const char MSG_SELFTEST_FAN_YES_ES[] PROGMEM = "Ventilador gira";; const char MSG_SELFTEST_FAN_YES_PL[] PROGMEM = "Kreci sie";; +const char MSG_SELFTEST_FAN_YES_DE[] PROGMEM = "Dreht"; const char * const MSG_SELFTEST_FAN_YES_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_FAN_YES_EN, MSG_SELFTEST_FAN_YES_CZ, MSG_SELFTEST_FAN_YES_IT, MSG_SELFTEST_FAN_YES_ES, - MSG_SELFTEST_FAN_YES_PL + MSG_SELFTEST_FAN_YES_PL, + MSG_SELFTEST_FAN_YES_DE }; const char MSG_SELFTEST_HEATERTHERMISTOR_EN[] PROGMEM = "Heater/Thermistor"; @@ -2060,6 +2310,7 @@ const char * const MSG_SELFTEST_HEATERTHERMISTOR_LANG_TABLE[LANG_NUM] PROGMEM = MSG_SELFTEST_HEATERTHERMISTOR_EN, MSG_SELFTEST_HEATERTHERMISTOR_IT, MSG_SELFTEST_HEATERTHERMISTOR_ES, + MSG_SELFTEST_HEATERTHERMISTOR_EN, MSG_SELFTEST_HEATERTHERMISTOR_EN }; @@ -2071,7 +2322,8 @@ const char * const MSG_SELFTEST_MOTOR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_MOTOR_EN, MSG_SELFTEST_MOTOR_IT, MSG_SELFTEST_MOTOR_EN, - MSG_SELFTEST_MOTOR_PL + MSG_SELFTEST_MOTOR_PL, + MSG_SELFTEST_MOTOR_EN }; const char MSG_SELFTEST_NOTCONNECTED_EN[] PROGMEM = "Not connected"; @@ -2079,22 +2331,26 @@ const char MSG_SELFTEST_NOTCONNECTED_CZ[] PROGMEM = "Nezapojeno "; const char MSG_SELFTEST_NOTCONNECTED_IT[] PROGMEM = "Non connesso"; const char MSG_SELFTEST_NOTCONNECTED_ES[] PROGMEM = "No hay conexion "; const char MSG_SELFTEST_NOTCONNECTED_PL[] PROGMEM = "Nie podlaczono "; +const char MSG_SELFTEST_NOTCONNECTED_DE[] PROGMEM = "Nicht angeschlossen"; const char * const MSG_SELFTEST_NOTCONNECTED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_NOTCONNECTED_EN, MSG_SELFTEST_NOTCONNECTED_CZ, MSG_SELFTEST_NOTCONNECTED_IT, MSG_SELFTEST_NOTCONNECTED_ES, - MSG_SELFTEST_NOTCONNECTED_PL + MSG_SELFTEST_NOTCONNECTED_PL, + MSG_SELFTEST_NOTCONNECTED_DE }; const char MSG_SELFTEST_OK_EN[] PROGMEM = "Self test OK"; const char MSG_SELFTEST_OK_IT[] PROGMEM = "Autotest OK"; +const char MSG_SELFTEST_OK_DE[] PROGMEM = "Selbsttest OK"; const char * const MSG_SELFTEST_OK_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_OK_EN, MSG_SELFTEST_OK_EN, MSG_SELFTEST_OK_IT, MSG_SELFTEST_OK_EN, - MSG_SELFTEST_OK_EN + MSG_SELFTEST_OK_EN, + MSG_SELFTEST_OK_DE }; const char MSG_SELFTEST_PLEASECHECK_EN[] PROGMEM = "Please check :"; @@ -2102,23 +2358,27 @@ const char MSG_SELFTEST_PLEASECHECK_CZ[] PROGMEM = "Zkontrolujte :"; const char MSG_SELFTEST_PLEASECHECK_IT[] PROGMEM = "Verificare:"; const char MSG_SELFTEST_PLEASECHECK_ES[] PROGMEM = "Controla :"; const char MSG_SELFTEST_PLEASECHECK_PL[] PROGMEM = "Skontroluj :"; +const char MSG_SELFTEST_PLEASECHECK_DE[] PROGMEM = "Bitte pruefe:"; const char * const MSG_SELFTEST_PLEASECHECK_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_PLEASECHECK_EN, MSG_SELFTEST_PLEASECHECK_CZ, MSG_SELFTEST_PLEASECHECK_IT, MSG_SELFTEST_PLEASECHECK_ES, - MSG_SELFTEST_PLEASECHECK_PL + MSG_SELFTEST_PLEASECHECK_PL, + MSG_SELFTEST_PLEASECHECK_DE }; const char MSG_SELFTEST_START_EN[] PROGMEM = "Self test start "; const char MSG_SELFTEST_START_IT[] PROGMEM = "Avvia autotest"; const char MSG_SELFTEST_START_ES[] PROGMEM = "Autotest salida"; +const char MSG_SELFTEST_START_DE[] PROGMEM = "Selbsttest start "; const char * const MSG_SELFTEST_START_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_START_EN, MSG_SELFTEST_START_EN, MSG_SELFTEST_START_IT, MSG_SELFTEST_START_ES, - MSG_SELFTEST_START_EN + MSG_SELFTEST_START_EN, + MSG_SELFTEST_START_DE }; const char MSG_SELFTEST_WIRINGERROR_EN[] PROGMEM = "Wiring error"; @@ -2126,12 +2386,14 @@ const char MSG_SELFTEST_WIRINGERROR_CZ[] PROGMEM = "Chyba zapojeni"; const char MSG_SELFTEST_WIRINGERROR_IT[] PROGMEM = "Errore cablaggio"; const char MSG_SELFTEST_WIRINGERROR_ES[] PROGMEM = "Error de conexion"; const char MSG_SELFTEST_WIRINGERROR_PL[] PROGMEM = "Blad polaczenia"; +const char MSG_SELFTEST_WIRINGERROR_DE[] PROGMEM = "Verdrahtungfehler"; const char * const MSG_SELFTEST_WIRINGERROR_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SELFTEST_WIRINGERROR_EN, MSG_SELFTEST_WIRINGERROR_CZ, MSG_SELFTEST_WIRINGERROR_IT, MSG_SELFTEST_WIRINGERROR_ES, - MSG_SELFTEST_WIRINGERROR_PL + MSG_SELFTEST_WIRINGERROR_PL, + MSG_SELFTEST_WIRINGERROR_DE }; const char MSG_SERIAL_ERROR_MENU_STRUCTURE_EN[] PROGMEM = "Error in menu structure"; @@ -2142,14 +2404,16 @@ const char * const MSG_SERIAL_ERROR_MENU_STRUCTURE_LANG_TABLE[1] PROGMEM = { const char MSG_SETTINGS_EN[] PROGMEM = "Settings"; const char MSG_SETTINGS_CZ[] PROGMEM = "Nastaveni"; const char MSG_SETTINGS_IT[] PROGMEM = "Impostazioni"; -const char MSG_SETTINGS_ES[] PROGMEM = "Ajuste"; +const char MSG_SETTINGS_ES[] PROGMEM = "Configuracion"; const char MSG_SETTINGS_PL[] PROGMEM = "Ustawienia"; +const char MSG_SETTINGS_DE[] PROGMEM = "Einstellungen"; const char * const MSG_SETTINGS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SETTINGS_EN, MSG_SETTINGS_CZ, MSG_SETTINGS_IT, MSG_SETTINGS_ES, - MSG_SETTINGS_PL + MSG_SETTINGS_PL, + MSG_SETTINGS_DE }; const char MSG_SET_HOME_OFFSETS_EN[] PROGMEM = "Set home offsets"; @@ -2167,25 +2431,29 @@ const char MSG_SHOW_END_STOPS_CZ[] PROGMEM = "Stav konc. spin."; const char MSG_SHOW_END_STOPS_IT[] PROGMEM = "Stato finecorsa"; const char MSG_SHOW_END_STOPS_ES[] PROGMEM = "Ensena tope final"; const char MSG_SHOW_END_STOPS_PL[] PROGMEM = "Pokaz krancowki"; +const char MSG_SHOW_END_STOPS_DE[] PROGMEM = "Anzeigen endstops"; const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SHOW_END_STOPS_EN, MSG_SHOW_END_STOPS_CZ, MSG_SHOW_END_STOPS_IT, MSG_SHOW_END_STOPS_ES, - MSG_SHOW_END_STOPS_PL + MSG_SHOW_END_STOPS_PL, + MSG_SHOW_END_STOPS_DE }; const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode [high power]"; const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod [vys. vykon]"; -const char MSG_SILENT_MODE_OFF_IT[] PROGMEM = "Mode [forte]"; -const char MSG_SILENT_MODE_OFF_ES[] PROGMEM = "Modo [mas fuerza]"; +const char MSG_SILENT_MODE_OFF_IT[] PROGMEM = "Mode [forte]"; +const char MSG_SILENT_MODE_OFF_ES[] PROGMEM = "Modo [rend.pleno]"; const char MSG_SILENT_MODE_OFF_PL[] PROGMEM = "Mod [w wydajnosc]"; +const char MSG_SILENT_MODE_OFF_DE[] PROGMEM = "Mode [Hohe Leist]"; const char * const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SILENT_MODE_OFF_EN, MSG_SILENT_MODE_OFF_CZ, MSG_SILENT_MODE_OFF_IT, MSG_SILENT_MODE_OFF_ES, - MSG_SILENT_MODE_OFF_PL + MSG_SILENT_MODE_OFF_PL, + MSG_SILENT_MODE_OFF_DE }; const char MSG_SILENT_MODE_ON_EN[] PROGMEM = "Mode [silent]"; @@ -2193,12 +2461,14 @@ const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod [tichy]"; const char MSG_SILENT_MODE_ON_IT[] PROGMEM = "Modo [silenzioso]"; const char MSG_SILENT_MODE_ON_ES[] PROGMEM = "Modo [silencio]"; const char MSG_SILENT_MODE_ON_PL[] PROGMEM = "Mod [cichy]"; +const char MSG_SILENT_MODE_ON_DE[] PROGMEM = "Mode [leise]"; const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SILENT_MODE_ON_EN, MSG_SILENT_MODE_ON_CZ, MSG_SILENT_MODE_ON_IT, MSG_SILENT_MODE_ON_ES, - MSG_SILENT_MODE_ON_PL + MSG_SILENT_MODE_ON_PL, + MSG_SILENT_MODE_ON_DE }; const char MSG_SOFTWARE_RESET_EN[] PROGMEM = " Software Reset"; @@ -2211,12 +2481,14 @@ const char MSG_SPEED_CZ[] PROGMEM = "Rychlost"; const char MSG_SPEED_IT[] PROGMEM = "Velocita"; const char MSG_SPEED_ES[] PROGMEM = "Velocidad"; const char MSG_SPEED_PL[] PROGMEM = "Predkosc"; +const char MSG_SPEED_DE[] PROGMEM = "Geschwindigkeit"; const char * const MSG_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SPEED_EN, MSG_SPEED_CZ, MSG_SPEED_IT, MSG_SPEED_ES, - MSG_SPEED_PL + MSG_SPEED_PL, + MSG_SPEED_DE }; const char MSG_STACK_ERROR_EN[] PROGMEM = "Error - static memory has been overwritten"; @@ -2229,12 +2501,14 @@ const char MSG_STATISTICS_CZ[] PROGMEM = "Statistika "; const char MSG_STATISTICS_IT[] PROGMEM = "Statistiche"; const char MSG_STATISTICS_ES[] PROGMEM = "Estadistica "; const char MSG_STATISTICS_PL[] PROGMEM = "Statystyka "; +const char MSG_STATISTICS_DE[] PROGMEM = "Statistiken "; const char * const MSG_STATISTICS_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STATISTICS_EN, MSG_STATISTICS_CZ, MSG_STATISTICS_IT, MSG_STATISTICS_ES, - MSG_STATISTICS_PL + MSG_STATISTICS_PL, + MSG_STATISTICS_DE }; const char MSG_STATS_FILAMENTUSED_EN[] PROGMEM = "Filament used: "; @@ -2242,12 +2516,14 @@ const char MSG_STATS_FILAMENTUSED_CZ[] PROGMEM = "Filament : "; const char MSG_STATS_FILAMENTUSED_IT[] PROGMEM = "Filamento usato:"; const char MSG_STATS_FILAMENTUSED_ES[] PROGMEM = "Filamento : "; const char MSG_STATS_FILAMENTUSED_PL[] PROGMEM = "Filament : "; +const char MSG_STATS_FILAMENTUSED_DE[] PROGMEM = "Filamentverbrauch:"; const char * const MSG_STATS_FILAMENTUSED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STATS_FILAMENTUSED_EN, MSG_STATS_FILAMENTUSED_CZ, MSG_STATS_FILAMENTUSED_IT, MSG_STATS_FILAMENTUSED_ES, - MSG_STATS_FILAMENTUSED_PL + MSG_STATS_FILAMENTUSED_PL, + MSG_STATS_FILAMENTUSED_DE }; const char MSG_STATS_PRINTTIME_EN[] PROGMEM = "Print time: "; @@ -2255,12 +2531,14 @@ const char MSG_STATS_PRINTTIME_CZ[] PROGMEM = "Cas tisku : "; const char MSG_STATS_PRINTTIME_IT[] PROGMEM = "Tempo di stampa:"; const char MSG_STATS_PRINTTIME_ES[] PROGMEM = "Tiempo de imp.:"; const char MSG_STATS_PRINTTIME_PL[] PROGMEM = "Czas druku : "; +const char MSG_STATS_PRINTTIME_DE[] PROGMEM = "Druckzeit: "; const char * const MSG_STATS_PRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STATS_PRINTTIME_EN, MSG_STATS_PRINTTIME_CZ, MSG_STATS_PRINTTIME_IT, MSG_STATS_PRINTTIME_ES, - MSG_STATS_PRINTTIME_PL + MSG_STATS_PRINTTIME_PL, + MSG_STATS_PRINTTIME_DE }; const char MSG_STATS_TOTALFILAMENT_EN[] PROGMEM = "Total filament :"; @@ -2268,12 +2546,14 @@ const char MSG_STATS_TOTALFILAMENT_CZ[] PROGMEM = "Filament celkem :"; const char MSG_STATS_TOTALFILAMENT_IT[] PROGMEM = "Filamento tot:"; const char MSG_STATS_TOTALFILAMENT_ES[] PROGMEM = "Filamento total:"; const char MSG_STATS_TOTALFILAMENT_PL[] PROGMEM = "Filament lacznie :"; +const char MSG_STATS_TOTALFILAMENT_DE[] PROGMEM = "Totales Filament:"; const char * const MSG_STATS_TOTALFILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STATS_TOTALFILAMENT_EN, MSG_STATS_TOTALFILAMENT_CZ, MSG_STATS_TOTALFILAMENT_IT, MSG_STATS_TOTALFILAMENT_ES, - MSG_STATS_TOTALFILAMENT_PL + MSG_STATS_TOTALFILAMENT_PL, + MSG_STATS_TOTALFILAMENT_DE }; const char MSG_STATS_TOTALPRINTTIME_EN[] PROGMEM = "Total print time :"; @@ -2281,12 +2561,14 @@ const char MSG_STATS_TOTALPRINTTIME_CZ[] PROGMEM = "Celkovy cas :"; const char MSG_STATS_TOTALPRINTTIME_IT[] PROGMEM = "Tempo stampa tot:"; const char MSG_STATS_TOTALPRINTTIME_ES[] PROGMEM = "Tiempo total :"; const char MSG_STATS_TOTALPRINTTIME_PL[] PROGMEM = "Czas calkowity :"; +const char MSG_STATS_TOTALPRINTTIME_DE[] PROGMEM = "Totale Druckzeit:"; const char * const MSG_STATS_TOTALPRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STATS_TOTALPRINTTIME_EN, MSG_STATS_TOTALPRINTTIME_CZ, MSG_STATS_TOTALPRINTTIME_IT, MSG_STATS_TOTALPRINTTIME_ES, - MSG_STATS_TOTALPRINTTIME_PL + MSG_STATS_TOTALPRINTTIME_PL, + MSG_STATS_TOTALPRINTTIME_DE }; const char MSG_STEPPER_TOO_HIGH_EN[] PROGMEM = "Steprate too high: "; @@ -2297,12 +2579,14 @@ const char * const MSG_STEPPER_TOO_HIGH_LANG_TABLE[1] PROGMEM = { const char MSG_STOPPED_EN[] PROGMEM = "STOPPED. "; const char MSG_STOPPED_IT[] PROGMEM = "ARRESTATO."; const char MSG_STOPPED_ES[] PROGMEM = "PARADA"; +const char MSG_STOPPED_DE[] PROGMEM = "GESTOPPT. "; const char * const MSG_STOPPED_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STOPPED_EN, MSG_STOPPED_EN, MSG_STOPPED_IT, MSG_STOPPED_ES, - MSG_STOPPED_EN + MSG_STOPPED_EN, + MSG_STOPPED_DE }; const char MSG_STOP_PRINT_EN[] PROGMEM = "Stop print"; @@ -2310,12 +2594,14 @@ const char MSG_STOP_PRINT_CZ[] PROGMEM = "Zastavit tisk"; const char MSG_STOP_PRINT_IT[] PROGMEM = "Arresta stampa"; const char MSG_STOP_PRINT_ES[] PROGMEM = "Detener impresion"; const char MSG_STOP_PRINT_PL[] PROGMEM = "Zatrzymac druk"; +const char MSG_STOP_PRINT_DE[] PROGMEM = "Druck halten"; const char * const MSG_STOP_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_STOP_PRINT_EN, MSG_STOP_PRINT_CZ, MSG_STOP_PRINT_IT, MSG_STOP_PRINT_ES, - MSG_STOP_PRINT_PL + MSG_STOP_PRINT_PL, + MSG_STOP_PRINT_DE }; const char MSG_STORE_EPROM_EN[] PROGMEM = "Store memory"; @@ -2325,48 +2611,56 @@ const char * const MSG_STORE_EPROM_LANG_TABLE[1] PROGMEM = { const char MSG_SUPPORT_EN[] PROGMEM = "Support"; const char MSG_SUPPORT_CZ[] PROGMEM = "Podpora"; +const char MSG_SUPPORT_ES[] PROGMEM = "Soporte"; const char MSG_SUPPORT_PL[] PROGMEM = "Pomoc"; const char * const MSG_SUPPORT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SUPPORT_EN, MSG_SUPPORT_CZ, MSG_SUPPORT_EN, - MSG_SUPPORT_EN, - MSG_SUPPORT_PL + MSG_SUPPORT_ES, + MSG_SUPPORT_PL, + MSG_SUPPORT_EN }; const char MSG_SWITCH_PS_OFF_EN[] PROGMEM = "Switch power off"; const char MSG_SWITCH_PS_OFF_CZ[] PROGMEM = "Zapnout zdroj"; const char MSG_SWITCH_PS_OFF_PL[] PROGMEM = "Zapnout zdroj"; +const char MSG_SWITCH_PS_OFF_DE[] PROGMEM = "Netzteil AUS"; const char * const MSG_SWITCH_PS_OFF_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SWITCH_PS_OFF_EN, MSG_SWITCH_PS_OFF_CZ, MSG_SWITCH_PS_OFF_EN, MSG_SWITCH_PS_OFF_EN, - MSG_SWITCH_PS_OFF_PL + MSG_SWITCH_PS_OFF_PL, + MSG_SWITCH_PS_OFF_DE }; const char MSG_SWITCH_PS_ON_EN[] PROGMEM = "Switch power on"; const char MSG_SWITCH_PS_ON_CZ[] PROGMEM = "Vypnout zdroj"; const char MSG_SWITCH_PS_ON_PL[] PROGMEM = "Vypnout zdroj"; +const char MSG_SWITCH_PS_ON_DE[] PROGMEM = "Netzteil EIN"; const char * const MSG_SWITCH_PS_ON_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_SWITCH_PS_ON_EN, MSG_SWITCH_PS_ON_CZ, MSG_SWITCH_PS_ON_EN, MSG_SWITCH_PS_ON_EN, - MSG_SWITCH_PS_ON_PL + MSG_SWITCH_PS_ON_PL, + MSG_SWITCH_PS_ON_DE }; const char MSG_TAKE_EFFECT_EN[] PROGMEM = " for take effect"; const char MSG_TAKE_EFFECT_CZ[] PROGMEM = " pro projeveni zmen"; const char MSG_TAKE_EFFECT_IT[] PROGMEM = " per attualizzare"; -const char MSG_TAKE_EFFECT_ES[] PROGMEM = "para tomar efecto"; -const char MSG_TAKE_EFFECT_PL[] PROGMEM = "wprow. zmian"; +const char MSG_TAKE_EFFECT_ES[] PROGMEM = " para aplicar cambios"; +const char MSG_TAKE_EFFECT_PL[] PROGMEM = " wprow. zmian"; +const char MSG_TAKE_EFFECT_DE[] PROGMEM = " um wirksam zu sein"; const char * const MSG_TAKE_EFFECT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_TAKE_EFFECT_EN, MSG_TAKE_EFFECT_CZ, MSG_TAKE_EFFECT_IT, MSG_TAKE_EFFECT_ES, - MSG_TAKE_EFFECT_PL + MSG_TAKE_EFFECT_PL, + MSG_TAKE_EFFECT_DE }; const char MSG_TEMPERATURE_EN[] PROGMEM = "Temperature"; @@ -2374,12 +2668,14 @@ const char MSG_TEMPERATURE_CZ[] PROGMEM = "Teplota"; const char MSG_TEMPERATURE_IT[] PROGMEM = "Temperatura"; const char MSG_TEMPERATURE_ES[] PROGMEM = "Temperatura"; const char MSG_TEMPERATURE_PL[] PROGMEM = "Temperatura"; +const char MSG_TEMPERATURE_DE[] PROGMEM = "Temperatur"; const char * const MSG_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_TEMPERATURE_EN, MSG_TEMPERATURE_CZ, MSG_TEMPERATURE_IT, MSG_TEMPERATURE_ES, - MSG_TEMPERATURE_PL + MSG_TEMPERATURE_PL, + MSG_TEMPERATURE_DE }; const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN[] PROGMEM = "SD card [normal]"; @@ -2389,7 +2685,8 @@ const char * const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_LANG_TABLE[LANG_NUM] MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN, MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN, MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN, - MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_PL + MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_PL, + MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN }; const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN[] PROGMEM = "SD card [FlshAir]"; @@ -2399,7 +2696,8 @@ const char * const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_LANG_TABLE[LANG_NUM] P MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN, MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN, MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN, - MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_PL + MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_PL, + MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON_EN }; const char MSG_TUNE_EN[] PROGMEM = "Tune"; @@ -2407,12 +2705,14 @@ const char MSG_TUNE_CZ[] PROGMEM = "Ladit"; const char MSG_TUNE_IT[] PROGMEM = "Regola"; const char MSG_TUNE_ES[] PROGMEM = "Ajustar"; const char MSG_TUNE_PL[] PROGMEM = "Nastroic"; +const char MSG_TUNE_DE[] PROGMEM = "Feineinstellen"; const char * const MSG_TUNE_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_TUNE_EN, MSG_TUNE_CZ, MSG_TUNE_IT, MSG_TUNE_ES, - MSG_TUNE_PL + MSG_TUNE_PL, + MSG_TUNE_DE }; const char MSG_UNKNOWN_COMMAND_EN[] PROGMEM = "Unknown command: \""; @@ -2425,25 +2725,29 @@ const char MSG_UNLOADING_FILAMENT_CZ[] PROGMEM = "Vysouvam filament"; const char MSG_UNLOADING_FILAMENT_IT[] PROGMEM = "Rilasc. filamento"; const char MSG_UNLOADING_FILAMENT_ES[] PROGMEM = "Soltando filamento"; const char MSG_UNLOADING_FILAMENT_PL[] PROGMEM = "Wysuwam filament"; +const char MSG_UNLOADING_FILAMENT_DE[] PROGMEM = "Filam. auswerfen"; const char * const MSG_UNLOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_UNLOADING_FILAMENT_EN, MSG_UNLOADING_FILAMENT_CZ, MSG_UNLOADING_FILAMENT_IT, MSG_UNLOADING_FILAMENT_ES, - MSG_UNLOADING_FILAMENT_PL + MSG_UNLOADING_FILAMENT_PL, + MSG_UNLOADING_FILAMENT_DE }; const char MSG_UNLOAD_FILAMENT_EN[] PROGMEM = "Unload filament"; const char MSG_UNLOAD_FILAMENT_CZ[] PROGMEM = "Vyjmout filament"; const char MSG_UNLOAD_FILAMENT_IT[] PROGMEM = "Scarica filamento"; -const char MSG_UNLOAD_FILAMENT_ES[] PROGMEM = "Sacar filamento"; +const char MSG_UNLOAD_FILAMENT_ES[] PROGMEM = "Soltar filamento"; const char MSG_UNLOAD_FILAMENT_PL[] PROGMEM = "Wyjac filament"; +const char MSG_UNLOAD_FILAMENT_DE[] PROGMEM = "Entnehm filament"; const char * const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_UNLOAD_FILAMENT_EN, MSG_UNLOAD_FILAMENT_CZ, MSG_UNLOAD_FILAMENT_IT, MSG_UNLOAD_FILAMENT_ES, - MSG_UNLOAD_FILAMENT_PL + MSG_UNLOAD_FILAMENT_PL, + MSG_UNLOAD_FILAMENT_DE }; const char MSG_USB_PRINTING_EN[] PROGMEM = "USB printing "; @@ -2456,18 +2760,21 @@ const char * const MSG_USB_PRINTING_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_USB_PRINTING_CZ, MSG_USB_PRINTING_IT, MSG_USB_PRINTING_ES, - MSG_USB_PRINTING_PL + MSG_USB_PRINTING_PL, + MSG_USB_PRINTING_EN }; const char MSG_USERWAIT_EN[] PROGMEM = "Wait for user..."; const char MSG_USERWAIT_IT[] PROGMEM = "Attendendo utente"; const char MSG_USERWAIT_ES[] PROGMEM = "Esperando ordenes"; +const char MSG_USERWAIT_DE[] PROGMEM = "Warte auf user..."; const char * const MSG_USERWAIT_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_USERWAIT_EN, MSG_USERWAIT_EN, MSG_USERWAIT_IT, MSG_USERWAIT_ES, - MSG_USERWAIT_EN + MSG_USERWAIT_EN, + MSG_USERWAIT_DE }; const char MSG_VMIN_EN[] PROGMEM = "Vmin"; @@ -2492,15 +2799,17 @@ const char * const MSG_VTRAV_MIN_LANG_TABLE[1] PROGMEM = { const char MSG_WAITING_TEMP_EN[] PROGMEM = "Waiting for nozzle and bed cooling"; const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podlozky."; -const char MSG_WAITING_TEMP_IT[] PROGMEM = "In attesa del raffreddamento della testina e del piatto."; +const char MSG_WAITING_TEMP_IT[] PROGMEM = "In attesa del raffreddamento della testina e del piatto"; const char MSG_WAITING_TEMP_ES[] PROGMEM = "Esperando enfriamiento de la cama y del extrusor."; const char MSG_WAITING_TEMP_PL[] PROGMEM = "Oczekiwanie na wychlodzenie dyszy i podkladki."; +const char MSG_WAITING_TEMP_DE[] PROGMEM = "Warten auf Abkuehlung von Heater und Bed."; const char * const MSG_WAITING_TEMP_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_WAITING_TEMP_EN, MSG_WAITING_TEMP_CZ, MSG_WAITING_TEMP_IT, MSG_WAITING_TEMP_ES, - MSG_WAITING_TEMP_PL + MSG_WAITING_TEMP_PL, + MSG_WAITING_TEMP_DE }; const char MSG_WATCH_EN[] PROGMEM = "Info screen"; @@ -2508,12 +2817,14 @@ const char MSG_WATCH_CZ[] PROGMEM = "Informace"; const char MSG_WATCH_IT[] PROGMEM = "Schermata info"; const char MSG_WATCH_ES[] PROGMEM = "Monitorizar"; const char MSG_WATCH_PL[] PROGMEM = "Informacje"; +const char MSG_WATCH_DE[] PROGMEM = "Information"; const char * const MSG_WATCH_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_WATCH_EN, MSG_WATCH_CZ, MSG_WATCH_IT, MSG_WATCH_ES, - MSG_WATCH_PL + MSG_WATCH_PL, + MSG_WATCH_DE }; const char MSG_WATCHDOG_RESET_EN[] PROGMEM = " Watchdog Reset"; @@ -2536,12 +2847,14 @@ const char MSG_YES_CZ[] PROGMEM = "Ano"; const char MSG_YES_IT[] PROGMEM = "Si"; const char MSG_YES_ES[] PROGMEM = "Si"; const char MSG_YES_PL[] PROGMEM = "Tak"; +const char MSG_YES_DE[] PROGMEM = "Ja"; const char * const MSG_YES_LANG_TABLE[LANG_NUM] PROGMEM = { MSG_YES_EN, MSG_YES_CZ, MSG_YES_IT, MSG_YES_ES, - MSG_YES_PL + MSG_YES_PL, + MSG_YES_DE }; const char MSG_Y_MAX_EN[] PROGMEM = "y_max: "; @@ -2576,15 +2889,17 @@ const char * const MSG_Z_MIN_LANG_TABLE[1] PROGMEM = { const char WELCOME_MSG_EN[] PROGMEM = CUSTOM_MENDEL_NAME " ready."; const char WELCOME_MSG_CZ[] PROGMEM = CUSTOM_MENDEL_NAME " ok"; -const char WELCOME_MSG_IT[] PROGMEM = CUSTOM_MENDEL_NAME "pronta."; -const char WELCOME_MSG_ES[] PROGMEM = CUSTOM_MENDEL_NAME " lista"; +const char WELCOME_MSG_IT[] PROGMEM = CUSTOM_MENDEL_NAME " pronta."; +const char WELCOME_MSG_ES[] PROGMEM = CUSTOM_MENDEL_NAME " prep."; const char WELCOME_MSG_PL[] PROGMEM = CUSTOM_MENDEL_NAME " gotowa"; +const char WELCOME_MSG_DE[] PROGMEM = CUSTOM_MENDEL_NAME " klar."; const char * const WELCOME_MSG_LANG_TABLE[LANG_NUM] PROGMEM = { WELCOME_MSG_EN, WELCOME_MSG_CZ, WELCOME_MSG_IT, WELCOME_MSG_ES, - WELCOME_MSG_PL + WELCOME_MSG_PL, + WELCOME_MSG_DE }; |