diff options
Diffstat (limited to 'Firmware/pins_Rambo.h')
-rw-r--r-- | Firmware/pins_Rambo.h | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/Firmware/pins_Rambo.h b/Firmware/pins_Rambo.h deleted file mode 100644 index 4ba00d1a5..000000000 --- a/Firmware/pins_Rambo.h +++ /dev/null @@ -1,162 +0,0 @@ -/***************************************************************** -* Rambo Pin Assignments -******************************************************************/ - -#define ELECTRONICS "RAMBoBig" - -#define KNOWN_BOARD -#ifndef __AVR_ATmega2560__ - #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu. -#endif - -#define FR_SENS 21 - -#define X_STEP_PIN 37 -#define X_DIR_PIN 48 -#define X_MIN_PIN 12 -#define X_MAX_PIN 30 -#define X_ENABLE_PIN 29 -#define X_MS1_PIN 40 -#define X_MS2_PIN 41 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 49 -#define Y_MIN_PIN 11 -#define Y_MAX_PIN 24 -#define Y_ENABLE_PIN 28 -#define Y_MS1_PIN 69 -#define Y_MS2_PIN 39 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_MIN_PIN 10 -#define Z_MAX_PIN 23 -#define Z_ENABLE_PIN 27 -#define Z_MS1_PIN 68 -#define Z_MS2_PIN 67 -#define TEMP_BED_PIN 2 -#define TEMP_0_PIN 0 -#define HEATER_1_PIN 7 -#define TEMP_1_PIN 1 -#define TEMP_2_PIN -1 - -#ifdef SNMM - #define E_MUX0_PIN 17 - #define E_MUX1_PIN 16 - #define E_MUX2_PIN 84 -#endif - -#ifdef DIS - #define D_REQUIRE 30 - #define D_DATA 20 - #define D_DATACLOCK 21 -#endif - -// The SDSS pin uses a different pin mapping from file Sd2PinMap.h -#define SDSS 53 - -#ifndef SDSUPPORT -// these pins are defined in the SD library if building with SD support - #define SCK_PIN 52 - #define MISO_PIN 50 - #define MOSI_PIN 51 -#endif - -#define BEEPER 84 - -#define BTN_EN1 72 -#define BTN_EN2 14 -#define BTN_ENC 9 - -#define SDCARDDETECT 15 - -#define LCD_PINS_RS 82 -#define LCD_PINS_ENABLE 18 -#define LCD_PINS_D4 19 -#define LCD_PINS_D5 70 -#define LCD_PINS_D6 85 -#define LCD_PINS_D7 71 - -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 -#define E0_MS1_PIN 65 -#define E0_MS2_PIN 66 -#define LED_PIN 13 - -#ifdef THREEMM_PRINTER - #define FAN_PIN 8 -#else - #define FAN_PIN 6 -#endif - -#define KILL_PIN -1 //80 with Smart Controller LCD -#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. -#define SDPOWER -1 -#define HEATER_2_PIN -1 - -#define E1_STEP_PIN 33 -#define E1_DIR_PIN 42 -#define E1_ENABLE_PIN 25 -#define E1_MS1_PIN 63 -#define E1_MS2_PIN 64 -#define DIGIPOTSS_PIN 38 -#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping -#define HEATER_0_PIN 9 -#define HEATER_BED_PIN 3 -#define PS_ON_PIN 4 -#define SDSS 53 -#ifdef ULTRA_LCD - #define KILL_PIN 80 - #ifdef NEWPANEL - //arduino pin which triggers an piezzo beeper - #define BEEPER 84 // Beeper on AUX-4 - #define LCD_PINS_RS 82 - #define LCD_PINS_ENABLE 18 - #define LCD_PINS_D4 19 - #define LCD_PINS_D5 70 - #define LCD_PINS_D6 85 - #define LCD_PINS_D7 71 - //buttons are directly attached using AUX-2 - #define BTN_EN1 76 - #define BTN_EN2 77 - #define BTN_ENC 78 //the click - #define BLEN_C 2 - #define BLEN_B 1 - #define BLEN_A 0 - #define SDCARDDETECT 81 // Ramps does not use this port - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - #else //old style panel with shift register - //arduino pin witch triggers an piezzo beeper - #define BEEPER 84 //No Beeper added - //buttons are attached to a shift register - // Not wired this yet - // #define SHIFT_CLK 38 - // #define SHIFT_LD 42 - // #define SHIFT_OUT 40 - // #define SHIFT_EN 17 - #define LCD_PINS_RS 82 - #define LCD_PINS_ENABLE 18 - #define LCD_PINS_D4 19 - #define LCD_PINS_D5 70 - #define LCD_PINS_D6 85 - #define LCD_PINS_D7 71 - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - //bits in the shift register that carry the buttons for: - // left up center down right red - #define BL_LE 7 - #define BL_UP 6 - #define BL_MI 5 - #define BL_DW 4 - #define BL_RI 3 - #define BL_ST 2 - #define BLEN_B 1 - #define BLEN_A 0 - #endif -#endif //ULTRA_LCD |