diff options
Diffstat (limited to 'resources/profiles/Original Prusa i3 MK2 and MK2S.ini')
| -rw-r--r-- | resources/profiles/Original Prusa i3 MK2 and MK2S.ini | 868 |
1 files changed, 752 insertions, 116 deletions
diff --git a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini index a186c3775..4b8fc6302 100644 --- a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini +++ b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini @@ -1,6 +1,6 @@ -# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:10:57 +# generated by Slic3r Prusa Edition 1.39.0 on 2018-04-27 at 18:00:54 -[print:0.05mm DETAIL] +[print:0.05mm ULTRADETAIL] avoid_crossing_perimeters = 0 bottom_solid_layers = 10 bridge_acceleration = 300 @@ -79,10 +79,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.3 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -106,7 +106,7 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.05mm DETAIL 0.25 nozzle] +[print:0.05mm ULTRADETAIL 0.25 nozzle] avoid_crossing_perimeters = 0 bottom_solid_layers = 10 bridge_acceleration = 300 @@ -163,7 +163,7 @@ perimeter_acceleration = 300 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 20 -perimeters = 4 +perimeters = 3 post_process = print_settings_id = raft_layers = 0 @@ -185,10 +185,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.18 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_interface_speed = 100% @@ -204,7 +204,113 @@ threads = 4 top_infill_extrusion_width = 0 top_solid_infill_speed = 20 top_solid_layers = 15 -travel_speed = 200 +travel_speed = 170 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.05mm ULTRADETAIL 0.25 nozzle MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 10 +bridge_acceleration = 600 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.25 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.05 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 600 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.18 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 50 +top_solid_layers = 15 +travel_speed = 170 wipe_tower = 0 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -212,7 +318,7 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.05mm DETAIL MK3] +[print:0.05mm ULTRADETAIL MK3] avoid_crossing_perimeters = 0 bottom_solid_layers = 10 bridge_acceleration = 300 @@ -222,7 +328,7 @@ bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 @@ -278,7 +384,7 @@ seam_position = nearest skirt_distance = 2 skirt_height = 3 skirts = 1 -small_perimeter_speed = 15 +small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 @@ -291,10 +397,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.3 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -310,7 +416,7 @@ threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 20 top_solid_layers = 15 -travel_speed = 180 +travel_speed = 170 wipe_tower = 0 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -397,10 +503,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -481,7 +587,7 @@ perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.25 perimeter_speed = 25 -perimeters = 4 +perimeters = 3 post_process = print_settings_id = raft_layers = 0 @@ -503,10 +609,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.18 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_interface_speed = 100% @@ -530,9 +636,221 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 +[print:0.10mm DETAIL 0.25 nozzle MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 7 +bridge_acceleration = 600 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.25 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.1 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 600 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.2 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 50 +top_solid_layers = 9 +travel_speed = 170 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.10mm DETAIL 0.6 nozzle MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 7 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.62 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.62 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.7 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 170 +interface_shells = 0 +layer_height = 0.1 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.62 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.62 +solid_infill_speed = 170 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 50 +top_solid_layers = 9 +travel_speed = 170 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + [print:0.10mm DETAIL MK3] avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 7 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 @@ -540,7 +858,7 @@ bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 @@ -563,17 +881,17 @@ first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 3500 +infill_acceleration = 1500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 200 +infill_speed = 170 interface_shells = 0 layer_height = 0.1 -max_print_speed = 250 +max_print_speed = 200 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -596,12 +914,12 @@ seam_position = nearest skirt_distance = 2 skirt_height = 3 skirts = 1 -small_perimeter_speed = 20 +small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 200 +solid_infill_speed = 170 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -627,8 +945,8 @@ thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 5 -travel_speed = 250 +top_solid_layers = 9 +travel_speed = 170 wipe_tower = 0 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -638,7 +956,7 @@ xy_size_compensation = 0 [print:0.15mm 100mms Linear Advance] avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 5 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.95 @@ -733,7 +1051,7 @@ thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 70 -top_solid_layers = 5 +top_solid_layers = 7 travel_speed = 120 wipe_tower = 1 wipe_tower_per_color_wipe = 15 @@ -799,7 +1117,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 50 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -821,10 +1139,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -927,10 +1245,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.2 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_interface_speed = 100% @@ -938,7 +1256,7 @@ support_material_pattern = rectilinear support_material_spacing = 1 support_material_speed = 50 support_material_synchronize_layers = 0 -support_material_threshold = 35 +support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 150% thin_walls = 0 @@ -954,6 +1272,112 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 +[print:0.15mm OPTIMAL 0.25 nozzle MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 600 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.25 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 600 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.18 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 50 +top_solid_layers = 7 +travel_speed = 170 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + [print:0.15mm OPTIMAL 0.6 nozzle] avoid_crossing_perimeters = 0 bottom_solid_layers = 5 @@ -1011,7 +1435,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.65 perimeter_speed = 50 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -1036,7 +1460,7 @@ support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -1060,9 +1484,115 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 +[print:0.15mm OPTIMAL 0.6 nozzle MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.65 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.7 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 170 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.62 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 170 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 50 +top_solid_layers = 7 +travel_speed = 170 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + [print:0.15mm OPTIMAL MK3] avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 5 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 @@ -1070,7 +1600,7 @@ bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 @@ -1093,17 +1623,17 @@ first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 3500 +infill_acceleration = 1500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 200 +infill_speed = 170 interface_shells = 0 layer_height = 0.15 -max_print_speed = 250 +max_print_speed = 200 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -1126,12 +1656,12 @@ seam_position = nearest skirt_distance = 2 skirt_height = 3 skirts = 1 -small_perimeter_speed = 20 +small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 200 +solid_infill_speed = 170 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -1157,8 +1687,8 @@ thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 5 -travel_speed = 250 +top_solid_layers = 7 +travel_speed = 170 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -1223,7 +1753,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 40 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -1266,7 +1796,7 @@ top_solid_infill_speed = 30 top_solid_layers = 7 travel_speed = 120 wipe_tower = 1 -wipe_tower_per_color_wipe = 20 +wipe_tower_per_color_wipe = 25 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 @@ -1329,7 +1859,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 40 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -1364,7 +1894,7 @@ support_material_speed = 50 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 0 -support_material_xy_spacing = 120% +support_material_xy_spacing = 80% thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.45 @@ -1372,7 +1902,7 @@ top_solid_infill_speed = 30 top_solid_layers = 7 travel_speed = 120 wipe_tower = 1 -wipe_tower_per_color_wipe = 20 +wipe_tower_per_color_wipe = 25 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 @@ -1494,7 +2024,7 @@ bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 @@ -1517,17 +2047,17 @@ first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 3500 +infill_acceleration = 1500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 200 +infill_speed = 170 interface_shells = 0 layer_height = 0.2 -max_print_speed = 250 +max_print_speed = 200 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -1550,12 +2080,12 @@ seam_position = nearest skirt_distance = 2 skirt_height = 3 skirts = 1 -small_perimeter_speed = 20 +small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 200 +solid_infill_speed = 170 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -1582,7 +2112,7 @@ threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 top_solid_layers = 5 -travel_speed = 250 +travel_speed = 170 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -1753,7 +2283,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.65 perimeter_speed = 50 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -1778,7 +2308,7 @@ support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -1802,6 +2332,112 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 +[print:0.20mm NORMAL 0.6 nozzle MK3] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.65 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.7 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 170 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 170 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.62 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 25 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 170 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 170 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + [print:0.20mm NORMAL SOLUBLE FULL] avoid_crossing_perimeters = 0 bottom_solid_layers = 4 @@ -1894,7 +2530,7 @@ support_material_speed = 50 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 1 -support_material_xy_spacing = 120% +support_material_xy_spacing = 60% thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 @@ -1902,7 +2538,7 @@ top_solid_infill_speed = 30 top_solid_layers = 5 travel_speed = 120 wipe_tower = 1 -wipe_tower_per_color_wipe = 20 +wipe_tower_per_color_wipe = 25 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 @@ -2000,7 +2636,7 @@ support_material_speed = 50 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 0 -support_material_xy_spacing = 120% +support_material_xy_spacing = 80% thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 @@ -2008,7 +2644,7 @@ top_solid_infill_speed = 30 top_solid_layers = 5 travel_speed = 120 wipe_tower = 1 -wipe_tower_per_color_wipe = 20 +wipe_tower_per_color_wipe = 25 wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 @@ -2093,10 +2729,10 @@ support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 +support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -2122,7 +2758,7 @@ xy_size_compensation = 0 [print:0.35mm FAST 0.6 nozzle] avoid_crossing_perimeters = 0 -bottom_solid_layers = 7 +bottom_solid_layers = 3 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 @@ -2177,7 +2813,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.65 perimeter_speed = 50 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -2202,7 +2838,7 @@ support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -2217,7 +2853,7 @@ thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.6 top_solid_infill_speed = 50 -top_solid_layers = 9 +top_solid_layers = 4 travel_speed = 120 wipe_tower = 1 wipe_tower_per_color_wipe = 15 @@ -2462,7 +3098,7 @@ first_layer_bed_temperature = 60 first_layer_temperature = 210 max_fan_speed = 100 min_fan_speed = 100 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 @@ -2482,7 +3118,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -2491,7 +3127,7 @@ first_layer_bed_temperature = 105 first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 @@ -2549,7 +3185,7 @@ first_layer_bed_temperature = 60 first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 100 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 200 @@ -2569,7 +3205,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -2578,7 +3214,7 @@ first_layer_bed_temperature = 90 first_layer_temperature = 260 max_fan_speed = 50 min_fan_speed = 30 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 @@ -2607,7 +3243,7 @@ first_layer_bed_temperature = 90 first_layer_temperature = 260 max_fan_speed = 50 min_fan_speed = 30 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 @@ -2627,7 +3263,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -2636,7 +3272,7 @@ first_layer_bed_temperature = 85 first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 @@ -2665,7 +3301,7 @@ first_layer_bed_temperature = 85 first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 260 @@ -2685,7 +3321,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" filament_settings_id = filament_soluble = 0 @@ -2694,7 +3330,7 @@ first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 @@ -2714,7 +3350,7 @@ filament_colour = #3A80CA filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -2723,7 +3359,7 @@ first_layer_bed_temperature = 100 first_layer_temperature = 270 max_fan_speed = 30 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 @@ -2743,7 +3379,7 @@ filament_colour = #3A80CA filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -2752,7 +3388,7 @@ first_layer_bed_temperature = 100 first_layer_temperature = 240 max_fan_speed = 30 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 @@ -2772,7 +3408,7 @@ filament_colour = #3A80CA filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -2781,7 +3417,7 @@ first_layer_bed_temperature = 100 first_layer_temperature = 265 max_fan_speed = 30 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 265 @@ -2801,19 +3437,19 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "CPE HG100 , CPE HM100" filament_settings_id = filament_soluble = 0 filament_type = PET first_layer_bed_temperature = 90 -first_layer_temperature = 260 -max_fan_speed = 80 -min_fan_speed = 80 -min_print_speed = 5 +first_layer_temperature = 275 +max_fan_speed = 50 +min_fan_speed = 50 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" -temperature = 260 +temperature = 275 [filament:Fillamentum Timberfil] bed_temperature = 60 @@ -2859,7 +3495,7 @@ filament_colour = #3A80CA filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" filament_settings_id = filament_soluble = 0 @@ -2868,7 +3504,7 @@ first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 255 @@ -2888,7 +3524,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" filament_settings_id = filament_soluble = 0 @@ -2897,7 +3533,7 @@ first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 @@ -2946,7 +3582,7 @@ filament_colour = #3A80CA filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" filament_settings_id = filament_soluble = 0 @@ -2955,7 +3591,7 @@ first_layer_bed_temperature = 120 first_layer_temperature = 270 max_fan_speed = 30 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 @@ -3004,7 +3640,7 @@ filament_colour = #3A80CA filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" filament_settings_id = filament_soluble = 0 @@ -3013,7 +3649,7 @@ first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 10 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 255 @@ -3033,7 +3669,7 @@ filament_colour = #FFFFD7 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +filament_max_volumetric_speed = 11 filament_notes = "" filament_settings_id = filament_soluble = 1 @@ -3042,7 +3678,7 @@ first_layer_bed_temperature = 100 first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 @@ -3062,7 +3698,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" filament_settings_id = filament_soluble = 0 @@ -3071,7 +3707,7 @@ first_layer_bed_temperature = 85 first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 @@ -3120,19 +3756,19 @@ filament_colour = #00CA0A filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 2.5 +filament_max_volumetric_speed = 1.5 filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" filament_settings_id = filament_soluble = 0 filament_type = FLEX first_layer_bed_temperature = 50 -first_layer_temperature = 220 +first_layer_temperature = 240 max_fan_speed = 90 min_fan_speed = 70 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" -temperature = 230 +temperature = 240 [filament:Taulman Bridge] bed_temperature = 50 @@ -3149,7 +3785,7 @@ filament_colour = #DEE0E6 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -3158,7 +3794,7 @@ first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 250 @@ -3178,7 +3814,7 @@ filament_colour = #FF8000 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +filament_max_volumetric_speed = 8 filament_notes = "" filament_settings_id = filament_soluble = 0 @@ -3187,7 +3823,7 @@ first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 -min_print_speed = 5 +min_print_speed = 15 slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 |