diff options
Diffstat (limited to 'src/slic3r/GUI/PresetBundle.cpp')
| -rw-r--r-- | src/slic3r/GUI/PresetBundle.cpp | 1497 |
1 files changed, 0 insertions, 1497 deletions
diff --git a/src/slic3r/GUI/PresetBundle.cpp b/src/slic3r/GUI/PresetBundle.cpp deleted file mode 100644 index 024884b00..000000000 --- a/src/slic3r/GUI/PresetBundle.cpp +++ /dev/null @@ -1,1497 +0,0 @@ -#include <cassert> - -#include "PresetBundle.hpp" -#include "Plater.hpp" - -#include <algorithm> -#include <set> -#include <fstream> -#include <unordered_set> -#include <boost/filesystem.hpp> -#include <boost/algorithm/clamp.hpp> -#include <boost/algorithm/string/predicate.hpp> - -#include <boost/nowide/cenv.hpp> -#include <boost/nowide/cstdio.hpp> -#include <boost/nowide/fstream.hpp> -#include <boost/property_tree/ini_parser.hpp> -#include <boost/property_tree/ptree.hpp> -#include <boost/locale.hpp> -#include <boost/log/trivial.hpp> - -#include <wx/image.h> - -#include "libslic3r/libslic3r.h" -#include "libslic3r/Utils.hpp" -#include "libslic3r/Model.hpp" -#include "GUI_App.hpp" -#include "libslic3r/CustomGCode.hpp" - - -// Store the print/filament/printer presets into a "presets" subdirectory of the Slic3rPE config dir. -// This breaks compatibility with the upstream Slic3r if the --datadir is used to switch between the two versions. -// #define SLIC3R_PROFILE_USE_PRESETS_SUBDIR - -namespace Slic3r { - -static std::vector<std::string> s_project_options { - "colorprint_heights", - "wiping_volumes_extruders", - "wiping_volumes_matrix" -}; - -const char *PresetBundle::PRUSA_BUNDLE = "PrusaResearch"; - -PresetBundle::PresetBundle() : - prints(Preset::TYPE_PRINT, Preset::print_options(), static_cast<const HostConfig&>(FullPrintConfig::defaults())), - filaments(Preset::TYPE_FILAMENT, Preset::filament_options(), static_cast<const HostConfig&>(FullPrintConfig::defaults())), - sla_materials(Preset::TYPE_SLA_MATERIAL, Preset::sla_material_options(), static_cast<const SLAMaterialConfig&>(SLAFullPrintConfig::defaults())), - sla_prints(Preset::TYPE_SLA_PRINT, Preset::sla_print_options(), static_cast<const SLAPrintObjectConfig&>(SLAFullPrintConfig::defaults())), - printers(Preset::TYPE_PRINTER, Preset::printer_options(), static_cast<const HostConfig&>(FullPrintConfig::defaults()), "- default FFF -") -{ - if (wxImage::FindHandler(wxBITMAP_TYPE_PNG) == nullptr) - wxImage::AddHandler(new wxPNGHandler); - - // The following keys are handled by the UI, they do not have a counterpart in any StaticPrintConfig derived classes, - // therefore they need to be handled differently. As they have no counterpart in StaticPrintConfig, they are not being - // initialized based on PrintConfigDef(), but to empty values (zeros, empty vectors, empty strings). - // - // "compatible_printers", "compatible_printers_condition", "inherits", - // "print_settings_id", "filament_settings_id", "printer_settings_id", - // "printer_vendor", "printer_model", "printer_variant", "default_print_profile", "default_filament_profile" - - // Create the ID config keys, as they are not part of the Static print config classes. - this->prints.default_preset().config.optptr("print_settings_id", true); - this->prints.default_preset().compatible_printers_condition(); - this->prints.default_preset().inherits(); - - this->filaments.default_preset().config.option<ConfigOptionStrings>("filament_settings_id", true)->values = { "" }; - this->filaments.default_preset().compatible_printers_condition(); - this->filaments.default_preset().inherits(); - // Set all the nullable values to nils. - this->filaments.default_preset().config.null_nullables(); - - this->sla_materials.default_preset().config.optptr("sla_material_settings_id", true); - this->sla_materials.default_preset().compatible_printers_condition(); - this->sla_materials.default_preset().inherits(); - - this->sla_prints.default_preset().config.optptr("sla_print_settings_id", true); - this->sla_prints.default_preset().config.opt_string("output_filename_format", true) = "[input_filename_base].sl1"; - this->sla_prints.default_preset().compatible_printers_condition(); - this->sla_prints.default_preset().inherits(); - - this->printers.add_default_preset(Preset::sla_printer_options(), static_cast<const SLAMaterialConfig&>(SLAFullPrintConfig::defaults()), "- default SLA -"); - this->printers.preset(1).printer_technology_ref() = ptSLA; - for (size_t i = 0; i < 2; ++ i) { - // The following ugly switch is to avoid printers.preset(0) to return the edited instance, as the 0th default is the current one. - Preset &preset = this->printers.default_preset(i); - preset.config.optptr("printer_settings_id", true); - preset.config.optptr("printer_vendor", true); - preset.config.optptr("printer_model", true); - preset.config.optptr("printer_variant", true); - preset.config.optptr("thumbnails", true); - if (i == 0) { - preset.config.optptr("default_print_profile", true); - preset.config.option<ConfigOptionStrings>("default_filament_profile", true)->values = { "" }; - } - else { - preset.config.optptr("default_sla_print_profile", true); - preset.config.optptr("default_sla_material_profile", true); - } - // default_sla_material_profile - preset.inherits(); - } - - // Re-activate the default presets, so their "edited" preset copies will be updated with the additional configuration values above. - this->prints .select_preset(0); - this->sla_prints .select_preset(0); - this->filaments .select_preset(0); - this->sla_materials.select_preset(0); - this->printers .select_preset(0); - - this->project_config.apply_only(FullPrintConfig::defaults(), s_project_options); -} - -PresetBundle::~PresetBundle() -{ -} - -void PresetBundle::reset(bool delete_files) -{ - // Clear the existing presets, delete their respective files. - this->vendors.clear(); - this->prints .reset(delete_files); - this->sla_prints .reset(delete_files); - this->filaments .reset(delete_files); - this->sla_materials.reset(delete_files); - this->printers .reset(delete_files); - this->filament_presets.clear(); - this->filament_presets.emplace_back(this->filaments.get_selected_preset_name()); - this->obsolete_presets.prints.clear(); - this->obsolete_presets.sla_prints.clear(); - this->obsolete_presets.filaments.clear(); - this->obsolete_presets.sla_materials.clear(); - this->obsolete_presets.printers.clear(); -} - -void PresetBundle::setup_directories() -{ - boost::filesystem::path data_dir = boost::filesystem::path(Slic3r::data_dir()); - std::initializer_list<boost::filesystem::path> paths = { - data_dir, - data_dir / "vendor", - data_dir / "cache", -#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR - // Store the print/filament/printer presets into a "presets" directory. - data_dir / "presets", - data_dir / "presets" / "print", - data_dir / "presets" / "filament", - data_dir / "presets" / "sla_print", - data_dir / "presets" / "sla_material", - data_dir / "presets" / "printer" -#else - // Store the print/filament/printer presets at the same location as the upstream Slic3r. - data_dir / "print", - data_dir / "filament", - data_dir / "sla_print", - data_dir / "sla_material", - data_dir / "printer" -#endif - }; - for (const boost::filesystem::path &path : paths) { - boost::filesystem::path subdir = path; - subdir.make_preferred(); - if (! boost::filesystem::is_directory(subdir) && - ! boost::filesystem::create_directory(subdir)) - throw std::runtime_error(std::string("Slic3r was unable to create its data directory at ") + subdir.string()); - } -} - -void PresetBundle::load_presets(AppConfig &config, const std::string &preferred_model_id) -{ - // First load the vendor specific system presets. - std::string errors_cummulative = this->load_system_presets(); - - const std::string dir_user_presets = data_dir() -#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR - // Store the print/filament/printer presets into a "presets" directory. - + "/presets" -#else - // Store the print/filament/printer presets at the same location as the upstream Slic3r. -#endif - ; - try { - this->prints.load_presets(dir_user_presets, "print"); - } catch (const std::runtime_error &err) { - errors_cummulative += err.what(); - } - try { - this->sla_prints.load_presets(dir_user_presets, "sla_print"); - } catch (const std::runtime_error &err) { - errors_cummulative += err.what(); - } - try { - this->filaments.load_presets(dir_user_presets, "filament"); - } catch (const std::runtime_error &err) { - errors_cummulative += err.what(); - } - try { - this->sla_materials.load_presets(dir_user_presets, "sla_material"); - } catch (const std::runtime_error &err) { - errors_cummulative += err.what(); - } - try { - this->printers.load_presets(dir_user_presets, "printer"); - } catch (const std::runtime_error &err) { - errors_cummulative += err.what(); - } - this->update_multi_material_filament_presets(); - this->update_compatible(PresetSelectCompatibleType::Never); - if (! errors_cummulative.empty()) - throw std::runtime_error(errors_cummulative); - - this->load_selections(config, preferred_model_id); -} - -// Load system presets into this PresetBundle. -// For each vendor, there will be a single PresetBundle loaded. -std::string PresetBundle::load_system_presets() -{ - // Here the vendor specific read only Config Bundles are stored. - boost::filesystem::path dir = (boost::filesystem::path(data_dir()) / "vendor").make_preferred(); - std::string errors_cummulative; - bool first = true; - for (auto &dir_entry : boost::filesystem::directory_iterator(dir)) - if (Slic3r::is_ini_file(dir_entry)) { - std::string name = dir_entry.path().filename().string(); - // Remove the .ini suffix. - name.erase(name.size() - 4); - try { - // Load the config bundle, flatten it. - if (first) { - // Reset this PresetBundle and load the first vendor config. - this->load_configbundle(dir_entry.path().string(), LOAD_CFGBNDLE_SYSTEM); - first = false; - } else { - // Load the other vendor configs, merge them with this PresetBundle. - // Report duplicate profiles. - PresetBundle other; - other.load_configbundle(dir_entry.path().string(), LOAD_CFGBNDLE_SYSTEM); - std::vector<std::string> duplicates = this->merge_presets(std::move(other)); - if (! duplicates.empty()) { - errors_cummulative += "Vendor configuration file " + name + " contains the following presets with names used by other vendors: "; - for (size_t i = 0; i < duplicates.size(); ++ i) { - if (i > 0) - errors_cummulative += ", "; - errors_cummulative += duplicates[i]; - } - } - } - } catch (const std::runtime_error &err) { - errors_cummulative += err.what(); - errors_cummulative += "\n"; - } - } - if (first) { - // No config bundle loaded, reset. - this->reset(false); - } - - this->update_system_maps(); - return errors_cummulative; -} - -// Merge one vendor's presets with the other vendor's presets, report duplicates. -std::vector<std::string> PresetBundle::merge_presets(PresetBundle &&other) -{ - this->vendors.insert(other.vendors.begin(), other.vendors.end()); - std::vector<std::string> duplicate_prints = this->prints .merge_presets(std::move(other.prints), this->vendors); - std::vector<std::string> duplicate_sla_prints = this->sla_prints .merge_presets(std::move(other.sla_prints), this->vendors); - std::vector<std::string> duplicate_filaments = this->filaments .merge_presets(std::move(other.filaments), this->vendors); - std::vector<std::string> duplicate_sla_materials = this->sla_materials.merge_presets(std::move(other.sla_materials), this->vendors); - std::vector<std::string> duplicate_printers = this->printers .merge_presets(std::move(other.printers), this->vendors); - append(this->obsolete_presets.prints, std::move(other.obsolete_presets.prints)); - append(this->obsolete_presets.sla_prints, std::move(other.obsolete_presets.sla_prints)); - append(this->obsolete_presets.filaments, std::move(other.obsolete_presets.filaments)); - append(this->obsolete_presets.sla_materials, std::move(other.obsolete_presets.sla_materials)); - append(this->obsolete_presets.printers, std::move(other.obsolete_presets.printers)); - append(duplicate_prints, std::move(duplicate_sla_prints)); - append(duplicate_prints, std::move(duplicate_filaments)); - append(duplicate_prints, std::move(duplicate_sla_materials)); - append(duplicate_prints, std::move(duplicate_printers)); - return duplicate_prints; -} - -void PresetBundle::update_system_maps() -{ - this->prints .update_map_system_profile_renamed(); - this->sla_prints .update_map_system_profile_renamed(); - this->filaments .update_map_system_profile_renamed(); - this->sla_materials.update_map_system_profile_renamed(); - this->printers .update_map_system_profile_renamed(); - - this->prints .update_map_alias_to_profile_name(); - this->sla_prints .update_map_alias_to_profile_name(); - this->filaments .update_map_alias_to_profile_name(); - this->sla_materials.update_map_alias_to_profile_name(); -} - -static inline std::string remove_ini_suffix(const std::string &name) -{ - std::string out = name; - if (boost::iends_with(out, ".ini")) - out.erase(out.end() - 4, out.end()); - return out; -} - -// Set the "enabled" flag for printer vendors, printer models and printer variants -// based on the user configuration. -// If the "vendor" section is missing, enable all models and variants of the particular vendor. -void PresetBundle::load_installed_printers(const AppConfig &config) -{ - this->update_system_maps(); - for (auto &preset : printers) - preset.set_visible_from_appconfig(config); -} - -const std::string& PresetBundle::get_preset_name_by_alias( const Preset::Type& preset_type, const std::string& alias) const -{ - // there are not aliases for Printers profiles - if (preset_type == Preset::TYPE_PRINTER || preset_type == Preset::TYPE_INVALID) - return alias; - - const PresetCollection& presets = preset_type == Preset::TYPE_PRINT ? prints : - preset_type == Preset::TYPE_SLA_PRINT ? sla_prints : - preset_type == Preset::TYPE_FILAMENT ? filaments : - sla_materials; - - return presets.get_preset_name_by_alias(alias); -} - -void PresetBundle::load_installed_filaments(AppConfig &config) -{ - if (! config.has_section(AppConfig::SECTION_FILAMENTS)) { - // Compatibility with the PrusaSlicer 2.1.1 and older, where the filament profiles were not installable yet. - // Find all filament profiles, which are compatible with installed printers, and act as if these filament profiles - // were installed. - std::unordered_set<const Preset*> compatible_filaments; - for (const Preset &printer : printers) - if (printer.is_visible && printer.printer_technology() == ptFFF) { - const PresetWithVendorProfile printer_with_vendor_profile = printers.get_preset_with_vendor_profile(printer); - for (const Preset &filament : filaments) - if (filament.is_system && is_compatible_with_printer(filaments.get_preset_with_vendor_profile(filament), printer_with_vendor_profile)) - compatible_filaments.insert(&filament); - } - // and mark these filaments as installed, therefore this code will not be executed at the next start of the application. - for (const auto &filament: compatible_filaments) - config.set(AppConfig::SECTION_FILAMENTS, filament->name, "1"); - } - - for (auto &preset : filaments) - preset.set_visible_from_appconfig(config); -} - -void PresetBundle::load_installed_sla_materials(AppConfig &config) -{ - if (! config.has_section(AppConfig::SECTION_MATERIALS)) { - std::unordered_set<const Preset*> comp_sla_materials; - // Compatibility with the PrusaSlicer 2.1.1 and older, where the SLA material profiles were not installable yet. - // Find all SLA material profiles, which are compatible with installed printers, and act as if these SLA material profiles - // were installed. - for (const Preset &printer : printers) - if (printer.is_visible && printer.printer_technology() == ptSLA) { - const PresetWithVendorProfile printer_with_vendor_profile = printers.get_preset_with_vendor_profile(printer); - for (const Preset &material : sla_materials) - if (material.is_system && is_compatible_with_printer(sla_materials.get_preset_with_vendor_profile(material), printer_with_vendor_profile)) - comp_sla_materials.insert(&material); - } - // and mark these SLA materials as installed, therefore this code will not be executed at the next start of the application. - for (const auto &material: comp_sla_materials) - config.set(AppConfig::SECTION_MATERIALS, material->name, "1"); - } - - for (auto &preset : sla_materials) - preset.set_visible_from_appconfig(config); -} - -// Load selections (current print, current filaments, current printer) from config.ini -// This is done on application start up or after updates are applied. -void PresetBundle::load_selections(AppConfig &config, const std::string &preferred_model_id) -{ - // Update visibility of presets based on application vendor / model / variant configuration. - this->load_installed_printers(config); - - // Update visibility of filament and sla material presets - this->load_installed_filaments(config); - this->load_installed_sla_materials(config); - - // Parse the initial print / filament / printer profile names. - std::string initial_print_profile_name = remove_ini_suffix(config.get("presets", "print")); - std::string initial_sla_print_profile_name = remove_ini_suffix(config.get("presets", "sla_print")); - std::string initial_filament_profile_name = remove_ini_suffix(config.get("presets", "filament")); - std::string initial_sla_material_profile_name = remove_ini_suffix(config.get("presets", "sla_material")); - std::string initial_printer_profile_name = remove_ini_suffix(config.get("presets", "printer")); - - // Activate print / filament / printer profiles from either the config, - // or from the preferred_model_id suggestion passed in by ConfigWizard. - // If the printer profile enumerated by the config are not visible, select an alternate preset. - // Do not select alternate profiles for the print / filament profiles as those presets - // will be selected by the following call of this->update_compatible(PresetSelectCompatibleType::Always). - - const Preset *initial_printer = printers.find_preset(initial_printer_profile_name); - const Preset *preferred_printer = printers.find_by_model_id(preferred_model_id); - printers.select_preset_by_name( - (preferred_printer != nullptr && (initial_printer == nullptr || !initial_printer->is_visible)) ? - preferred_printer->name : - initial_printer_profile_name, - true); - - // Selects the profile, leaves it to -1 if the initial profile name is empty or if it was not found. - prints.select_preset_by_name_strict(initial_print_profile_name); - filaments.select_preset_by_name_strict(initial_filament_profile_name); - sla_prints.select_preset_by_name_strict(initial_sla_print_profile_name); - sla_materials.select_preset_by_name_strict(initial_sla_material_profile_name); - - // Load the names of the other filament profiles selected for a multi-material printer. - // Load it even if the current printer technology is SLA. - // The possibly excessive filament names will be later removed with this->update_multi_material_filament_presets() - // once the FFF technology gets selected. - this->filament_presets = { filaments.get_selected_preset_name() }; - for (unsigned int i = 1; i < 1000; ++ i) { - char name[64]; - sprintf(name, "filament_%u", i); - if (! config.has("presets", name)) - break; - this->filament_presets.emplace_back(remove_ini_suffix(config.get("presets", name))); - } - - // Update visibility of presets based on their compatibility with the active printer. - // Always try to select a compatible print and filament preset to the current printer preset, - // as the application may have been closed with an active "external" preset, which does not - // exist. - this->update_compatible(PresetSelectCompatibleType::Always); - this->update_multi_material_filament_presets(); -} - -// Export selections (current print, current filaments, current printer) into config.ini -void PresetBundle::export_selections(AppConfig &config) -{ - assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() >= 1); - assert(this->printers.get_edited_preset().printer_technology() != ptFFF || filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front()); - config.clear_section("presets"); - config.set("presets", "print", prints.get_selected_preset_name()); - config.set("presets", "filament", filament_presets.front()); - for (unsigned i = 1; i < filament_presets.size(); ++i) { - char name[64]; - sprintf(name, "filament_%u", i); - config.set("presets", name, filament_presets[i]); - } - - config.set("presets", "sla_print", sla_prints.get_selected_preset_name()); - config.set("presets", "sla_material", sla_materials.get_selected_preset_name()); - config.set("presets", "printer", printers.get_selected_preset_name()); -} - -DynamicPrintConfig PresetBundle::full_config() const -{ - return (this->printers.get_edited_preset().printer_technology() == ptFFF) ? - this->full_fff_config() : - this->full_sla_config(); -} - -DynamicPrintConfig PresetBundle::full_config_secure() const -{ - DynamicPrintConfig config = this->full_config(); - config.erase("print_host"); - config.erase("printhost_apikey"); - config.erase("printhost_cafile"); - return config; -} - -DynamicPrintConfig PresetBundle::full_fff_config() const -{ - DynamicPrintConfig out; - out.apply(FullPrintConfig::defaults()); - out.apply(this->prints.get_edited_preset().config); - // Add the default filament preset to have the "filament_preset_id" defined. - out.apply(this->filaments.default_preset().config); - out.apply(this->printers.get_edited_preset().config); - out.apply(this->project_config); - - auto *nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(out.option("nozzle_diameter")); - size_t num_extruders = nozzle_diameter->values.size(); - // Collect the "compatible_printers_condition" and "inherits" values over all presets (print, filaments, printers) into a single vector. - std::vector<std::string> compatible_printers_condition; - std::vector<std::string> compatible_prints_condition; - std::vector<std::string> inherits; - compatible_printers_condition.emplace_back(this->prints.get_edited_preset().compatible_printers_condition()); - inherits .emplace_back(this->prints.get_edited_preset().inherits()); - - if (num_extruders <= 1) { - out.apply(this->filaments.get_edited_preset().config); - compatible_printers_condition.emplace_back(this->filaments.get_edited_preset().compatible_printers_condition()); - compatible_prints_condition .emplace_back(this->filaments.get_edited_preset().compatible_prints_condition()); - inherits .emplace_back(this->filaments.get_edited_preset().inherits()); - } else { - // Retrieve filament presets and build a single config object for them. - // First collect the filament configurations based on the user selection of this->filament_presets. - // Here this->filaments.find_preset() and this->filaments.first_visible() return the edited copy of the preset if active. - std::vector<const DynamicPrintConfig*> filament_configs; - for (const std::string &filament_preset_name : this->filament_presets) - filament_configs.emplace_back(&this->filaments.find_preset(filament_preset_name, true)->config); - while (filament_configs.size() < num_extruders) - filament_configs.emplace_back(&this->filaments.first_visible().config); - for (const DynamicPrintConfig *cfg : filament_configs) { - // The compatible_prints/printers_condition() returns a reference to configuration key, which may not yet exist. - DynamicPrintConfig &cfg_rw = *const_cast<DynamicPrintConfig*>(cfg); - compatible_printers_condition.emplace_back(Preset::compatible_printers_condition(cfg_rw)); - compatible_prints_condition .emplace_back(Preset::compatible_prints_condition(cfg_rw)); - inherits .emplace_back(Preset::inherits(cfg_rw)); - } - // Option values to set a ConfigOptionVector from. - std::vector<const ConfigOption*> filament_opts(num_extruders, nullptr); - // loop through options and apply them to the resulting config. - for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) { - if (key == "compatible_prints" || key == "compatible_printers") - continue; - // Get a destination option. - ConfigOption *opt_dst = out.option(key, false); - if (opt_dst->is_scalar()) { - // Get an option, do not create if it does not exist. - const ConfigOption *opt_src = filament_configs.front()->option(key); - if (opt_src != nullptr) - opt_dst->set(opt_src); - } else { - // Setting a vector value from all filament_configs. - for (size_t i = 0; i < filament_opts.size(); ++ i) - filament_opts[i] = filament_configs[i]->option(key); - static_cast<ConfigOptionVectorBase*>(opt_dst)->set(filament_opts); - } - } - } - - // Don't store the "compatible_printers_condition" for the printer profile, there is none. - inherits.emplace_back(this->printers.get_edited_preset().inherits()); - - // These value types clash between the print and filament profiles. They should be renamed. - out.erase("compatible_prints"); - out.erase("compatible_prints_condition"); - out.erase("compatible_printers"); - out.erase("compatible_printers_condition"); - out.erase("inherits"); - - static const char *keys[] = { "perimeter", "infill", "solid_infill", "support_material", "support_material_interface" }; - for (size_t i = 0; i < sizeof(keys) / sizeof(keys[0]); ++ i) { - std::string key = std::string(keys[i]) + "_extruder"; - auto *opt = dynamic_cast<ConfigOptionInt*>(out.option(key, false)); - assert(opt != nullptr); - opt->value = boost::algorithm::clamp<int>(opt->value, 0, int(num_extruders)); - } - - out.option<ConfigOptionString >("print_settings_id", true)->value = this->prints.get_selected_preset_name(); - out.option<ConfigOptionStrings>("filament_settings_id", true)->values = this->filament_presets; - out.option<ConfigOptionString >("printer_settings_id", true)->value = this->printers.get_selected_preset_name(); - - // Serialize the collected "compatible_printers_condition" and "inherits" fields. - // There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored. - // The vector will not be stored if all fields are empty strings. - auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) { - bool nonempty = false; - for (const std::string &v : values) - if (! v.empty()) { - nonempty = true; - break; - } - if (nonempty) - out.set_key_value(key, new ConfigOptionStrings(std::move(values))); - }; - add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_printers_condition_cummulative"); - add_if_some_non_empty(std::move(compatible_prints_condition), "compatible_prints_condition_cummulative"); - add_if_some_non_empty(std::move(inherits), "inherits_cummulative"); - - out.option<ConfigOptionEnumGeneric>("printer_technology", true)->value = ptFFF; - return out; -} - -DynamicPrintConfig PresetBundle::full_sla_config() const -{ - DynamicPrintConfig out; - out.apply(SLAFullPrintConfig::defaults()); - out.apply(this->sla_prints.get_edited_preset().config); - out.apply(this->sla_materials.get_edited_preset().config); - out.apply(this->printers.get_edited_preset().config); - // There are no project configuration values as of now, the project_config is reserved for FFF printers. -// out.apply(this->project_config); - - // Collect the "compatible_printers_condition" and "inherits" values over all presets (sla_prints, sla_materials, printers) into a single vector. - std::vector<std::string> compatible_printers_condition; - std::vector<std::string> compatible_prints_condition; - std::vector<std::string> inherits; - compatible_printers_condition.emplace_back(this->sla_prints.get_edited_preset().compatible_printers_condition()); - inherits .emplace_back(this->sla_prints.get_edited_preset().inherits()); - compatible_printers_condition.emplace_back(this->sla_materials.get_edited_preset().compatible_printers_condition()); - compatible_prints_condition .emplace_back(this->sla_materials.get_edited_preset().compatible_prints_condition()); - inherits .emplace_back(this->sla_materials.get_edited_preset().inherits()); - inherits .emplace_back(this->printers.get_edited_preset().inherits()); - - // These two value types clash between the print and filament profiles. They should be renamed. - out.erase("compatible_printers"); - out.erase("compatible_printers_condition"); - out.erase("inherits"); - - out.option<ConfigOptionString >("sla_print_settings_id", true)->value = this->sla_prints.get_selected_preset_name(); - out.option<ConfigOptionString >("sla_material_settings_id", true)->value = this->sla_materials.get_selected_preset_name(); - out.option<ConfigOptionString >("printer_settings_id", true)->value = this->printers.get_selected_preset_name(); - - // Serialize the collected "compatible_printers_condition" and "inherits" fields. - // There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored. - // The vector will not be stored if all fields are empty strings. - auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) { - bool nonempty = false; - for (const std::string &v : values) - if (! v.empty()) { - nonempty = true; - break; - } - if (nonempty) - out.set_key_value(key, new ConfigOptionStrings(std::move(values))); - }; - add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_printers_condition_cummulative"); - add_if_some_non_empty(std::move(compatible_prints_condition), "compatible_prints_condition_cummulative"); - add_if_some_non_empty(std::move(inherits), "inherits_cummulative"); - - out.option<ConfigOptionEnumGeneric>("printer_technology", true)->value = ptSLA; - return out; -} - -// Load an external config file containing the print, filament and printer presets. -// Instead of a config file, a G-code may be loaded containing the full set of parameters. -// In the future the configuration will likely be read from an AMF file as well. -// If the file is loaded successfully, its print / filament / printer profiles will be activated. -void PresetBundle::load_config_file(const std::string &path) -{ - if (boost::iends_with(path, ".gcode") || boost::iends_with(path, ".g")) { - DynamicPrintConfig config; - config.apply(FullPrintConfig::defaults()); - config.load_from_gcode_file(path); - Preset::normalize(config); - load_config_file_config(path, true, std::move(config)); - return; - } - - // 1) Try to load the config file into a boost property tree. - boost::property_tree::ptree tree; - try { - boost::nowide::ifstream ifs(path); - boost::property_tree::read_ini(ifs, tree); - } catch (const std::ifstream::failure &err) { - throw std::runtime_error(std::string("The Config Bundle cannot be loaded: ") + path + "\n\tReason: " + err.what()); - } catch (const boost::property_tree::file_parser_error &err) { - throw std::runtime_error((boost::format("Failed loading the Config Bundle \"%1%\": %2% at line %3%") - % err.filename() % err.message() % err.line()).str()); - } catch (const std::runtime_error &err) { - throw std::runtime_error(std::string("Failed loading the preset file: ") + path + "\n\tReason: " + err.what()); - } - - // 2) Continue based on the type of the configuration file. - ConfigFileType config_file_type = guess_config_file_type(tree); - switch (config_file_type) { - case CONFIG_FILE_TYPE_UNKNOWN: - throw std::runtime_error(std::string("Unknown configuration file type: ") + path); - case CONFIG_FILE_TYPE_APP_CONFIG: - throw std::runtime_error(std::string("Invalid configuration file: ") + path + ". This is an application config file."); - case CONFIG_FILE_TYPE_CONFIG: - { - // Initialize a config from full defaults. - DynamicPrintConfig config; - config.apply(FullPrintConfig::defaults()); - config.load(tree); - Preset::normalize(config); - load_config_file_config(path, true, std::move(config)); - break; - } - case CONFIG_FILE_TYPE_CONFIG_BUNDLE: - load_config_file_config_bundle(path, tree); - break; - } -} - -// Load a config file from a boost property_tree. This is a private method called from load_config_file. -void PresetBundle::load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config) -{ - PrinterTechnology printer_technology = Preset::printer_technology(config); - - // The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway, - // but some of the alpha versions of Slic3r did. - { - ConfigOption *opt_compatible = config.optptr("compatible_printers"); - if (opt_compatible != nullptr) { - assert(opt_compatible->type() == coStrings); - if (opt_compatible->type() == coStrings) - static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear(); - } - } - - size_t num_extruders = (printer_technology == ptFFF) ? - std::min(config.option<ConfigOptionFloats>("nozzle_diameter" )->values.size(), - config.option<ConfigOptionFloats>("filament_diameter")->values.size()) : - // 1 SLA material - 1; - // Make a copy of the "compatible_printers_condition_cummulative" and "inherits_cummulative" vectors, which - // accumulate values over all presets (print, filaments, printers). - // These values will be distributed into their particular presets when loading. - std::vector<std::string> compatible_printers_condition_values = std::move(config.option<ConfigOptionStrings>("compatible_printers_condition_cummulative", true)->values); - std::vector<std::string> compatible_prints_condition_values = std::move(config.option<ConfigOptionStrings>("compatible_prints_condition_cummulative", true)->values); - std::vector<std::string> inherits_values = std::move(config.option<ConfigOptionStrings>("inherits_cummulative", true)->values); - std::string &compatible_printers_condition = Preset::compatible_printers_condition(config); - std::string &compatible_prints_condition = Preset::compatible_prints_condition(config); - std::string &inherits = Preset::inherits(config); - compatible_printers_condition_values.resize(num_extruders + 2, std::string()); - compatible_prints_condition_values.resize(num_extruders, std::string()); - inherits_values.resize(num_extruders + 2, std::string()); - // The "default_filament_profile" will be later extracted into the printer profile. - switch (printer_technology) { - case ptFFF: - config.option<ConfigOptionString>("default_print_profile", true); - config.option<ConfigOptionStrings>("default_filament_profile", true)->values.resize(num_extruders, std::string()); - break; - case ptSLA: - config.option<ConfigOptionString>("default_sla_print_profile", true); - config.option<ConfigOptionString>("default_sla_material_profile", true); - break; - default: break; - } - - // 1) Create a name from the file name. - // Keep the suffix (.ini, .gcode, .amf, .3mf etc) to differentiate it from the normal profiles. - std::string name = is_external ? boost::filesystem::path(name_or_path).filename().string() : name_or_path; - - // 2) If the loading succeeded, split and load the config into print / filament / printer settings. - // First load the print and printer presets. - - auto load_preset = - [&config, &inherits, &inherits_values, - &compatible_printers_condition, &compatible_printers_condition_values, - &compatible_prints_condition, &compatible_prints_condition_values, - is_external, &name, &name_or_path] - (PresetCollection &presets, size_t idx, const std::string &key) { - // Split the "compatible_printers_condition" and "inherits" values one by one from a single vector to the print & printer profiles. - inherits = inherits_values[idx]; - compatible_printers_condition = compatible_printers_condition_values[idx]; - if (idx > 0 && idx - 1 < compatible_prints_condition_values.size()) - compatible_prints_condition = compatible_prints_condition_values[idx - 1]; - if (is_external) - presets.load_external_preset(name_or_path, name, config.opt_string(key, true), config); - else - presets.load_preset(presets.path_from_name(name), name, config).save(); - }; - - switch (Preset::printer_technology(config)) { - case ptFFF: - { - load_preset(this->prints, 0, "print_settings_id"); - load_preset(this->printers, num_extruders + 1, "printer_settings_id"); - - // 3) Now load the filaments. If there are multiple filament presets, split them and load them. - auto old_filament_profile_names = config.option<ConfigOptionStrings>("filament_settings_id", true); - old_filament_profile_names->values.resize(num_extruders, std::string()); - - if (num_extruders <= 1) { - // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets. - inherits = inherits_values[1]; - compatible_printers_condition = compatible_printers_condition_values[1]; - compatible_prints_condition = compatible_prints_condition_values.front(); - Preset *loaded = nullptr; - if (is_external) { - loaded = &this->filaments.load_external_preset(name_or_path, name, old_filament_profile_names->values.front(), config); - } else { - loaded = &this->filaments.load_preset(this->filaments.path_from_name(name), name, config); - loaded->save(); - } - this->filament_presets.clear(); - this->filament_presets.emplace_back(loaded->name); - } else { - // Split the filament presets, load each of them separately. - std::vector<DynamicPrintConfig> configs(num_extruders, this->filaments.default_preset().config); - // loop through options and scatter them into configs. - for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) { - const ConfigOption *other_opt = config.option(key); - if (other_opt == nullptr) - continue; - if (other_opt->is_scalar()) { - for (size_t i = 0; i < configs.size(); ++ i) - configs[i].option(key, false)->set(other_opt); - } else if (key != "compatible_printers" && key != "compatible_prints") { - for (size_t i = 0; i < configs.size(); ++ i) - static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set_at(other_opt, 0, i); - } - } - // Load the configs into this->filaments and make them active. - this->filament_presets = std::vector<std::string>(configs.size()); - // To avoid incorrect selection of the first filament preset (means a value of Preset->m_idx_selected) - // in a case when next added preset take a place of previosly selected preset, - // we should add presets from last to first - for (int i = (int)configs.size()-1; i >= 0; i--) { - DynamicPrintConfig &cfg = configs[i]; - // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets. - cfg.opt_string("compatible_printers_condition", true) = compatible_printers_condition_values[i + 1]; - cfg.opt_string("compatible_prints_condition", true) = compatible_prints_condition_values[i]; - cfg.opt_string("inherits", true) = inherits_values[i + 1]; - // Load all filament presets, but only select the first one in the preset dialog. - Preset *loaded = nullptr; - if (is_external) - loaded = &this->filaments.load_external_preset(name_or_path, name, - (i < int(old_filament_profile_names->values.size())) ? old_filament_profile_names->values[i] : "", - std::move(cfg), i == 0); - else { - // Used by the config wizard when creating a custom setup. - // Therefore this block should only be called for a single extruder. - char suffix[64]; - if (i == 0) - suffix[0] = 0; - else - sprintf(suffix, "%d", (int)i); - std::string new_name = name + suffix; - loaded = &this->filaments.load_preset(this->filaments.path_from_name(new_name), - new_name, std::move(cfg), i == 0); - loaded->save(); - } - this->filament_presets[i] = loaded->name; - } - } - // 4) Load the project config values (the per extruder wipe matrix etc). - this->project_config.apply_only(config, s_project_options); - - CustomGCode::update_custom_gcode_per_print_z_from_config(GUI::wxGetApp().plater()->model().custom_gcode_per_print_z, &this->project_config); - - break; - } - case ptSLA: - load_preset(this->sla_prints, 0, "sla_print_settings_id"); - load_preset(this->sla_materials, 1, "sla_material_settings_id"); - load_preset(this->printers, 2, "printer_settings_id"); - break; - default: break; - } - - this->update_compatible(PresetSelectCompatibleType::Never); -} - -// Load the active configuration of a config bundle from a boost property_tree. This is a private method called from load_config_file. -void PresetBundle::load_config_file_config_bundle(const std::string &path, const boost::property_tree::ptree &tree) -{ - // 1) Load the config bundle into a temp data. - PresetBundle tmp_bundle; - // Load the config bundle, don't save the loaded presets to user profile directory. - tmp_bundle.load_configbundle(path, 0); - std::string bundle_name = std::string(" - ") + boost::filesystem::path(path).filename().string(); - - // 2) Extract active configs from the config bundle, copy them and activate them in this bundle. - auto load_one = [this, &path, &bundle_name](PresetCollection &collection_dst, PresetCollection &collection_src, const std::string &preset_name_src, bool activate) -> std::string { - Preset *preset_src = collection_src.find_preset(preset_name_src, false); - Preset *preset_dst = collection_dst.find_preset(preset_name_src, false); - assert(preset_src != nullptr); - std::string preset_name_dst; - if (preset_dst != nullptr && preset_dst->is_default) { - // No need to copy a default preset, it always exists in collection_dst. - if (activate) - collection_dst.select_preset(0); - return preset_name_src; - } else if (preset_dst != nullptr && preset_src->config == preset_dst->config) { - // Don't save as the config exists in the current bundle and its content is the same. - return preset_name_src; - } else { - // Generate a new unique name. - preset_name_dst = preset_name_src + bundle_name; - Preset *preset_dup = nullptr; - for (size_t i = 1; (preset_dup = collection_dst.find_preset(preset_name_dst, false)) != nullptr; ++ i) { - if (preset_src->config == preset_dup->config) - // The preset has been already copied into collection_dst. - return preset_name_dst; - // Try to generate another name. - char buf[64]; - sprintf(buf, " (%d)", (int)i); - preset_name_dst = preset_name_src + buf + bundle_name; - } - } - assert(! preset_name_dst.empty()); - // Save preset_src->config into collection_dst under preset_name_dst. - // The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway, - // but some of the alpha versions of Slic3r did. - ConfigOption *opt_compatible = preset_src->config.optptr("compatible_printers"); - if (opt_compatible != nullptr) { - assert(opt_compatible->type() == coStrings); - if (opt_compatible->type() == coStrings) - static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear(); - } - collection_dst.load_preset(path, preset_name_dst, std::move(preset_src->config), activate).is_external = true; - return preset_name_dst; - }; - load_one(this->prints, tmp_bundle.prints, tmp_bundle.prints .get_selected_preset_name(), true); - load_one(this->sla_prints, tmp_bundle.sla_prints, tmp_bundle.sla_prints .get_selected_preset_name(), true); - load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filaments .get_selected_preset_name(), true); - load_one(this->sla_materials, tmp_bundle.sla_materials, tmp_bundle.sla_materials.get_selected_preset_name(), true); - load_one(this->printers, tmp_bundle.printers, tmp_bundle.printers .get_selected_preset_name(), true); - this->update_multi_material_filament_presets(); - for (size_t i = 1; i < std::min(tmp_bundle.filament_presets.size(), this->filament_presets.size()); ++ i) - this->filament_presets[i] = load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filament_presets[i], false); - - this->update_compatible(PresetSelectCompatibleType::Never); -} - -// Process the Config Bundle loaded as a Boost property tree. -// For each print, filament and printer preset (group defined by group_name), apply the inherited presets. -// The presets starting with '*' are considered non-terminal and they are -// removed through the flattening process by this function. -// This function will never fail, but it will produce error messages through boost::log. -// system_profiles will not be flattened, and they will be kept inside the "inherits" field -static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const std::string &group_name, const std::vector<std::string> &system_profiles) -{ - namespace pt = boost::property_tree; - - // 1) For the group given by group_name, initialize the presets. - struct Prst { - Prst(const std::string &name, pt::ptree *node) : name(name), node(node) {} - // Name of this preset. If the name starts with '*', it is an intermediate preset, - // which will not make it into the result. - const std::string name; - // Link to the source boost property tree node, owned by tree. - pt::ptree *node; - // Link to the presets, from which this preset inherits. - std::vector<Prst*> inherits; - // Link to the presets, for which this preset is a direct parent. - std::vector<Prst*> parent_of; - // When running the Kahn's Topological sorting algorithm, this counter is decreased from inherits.size() to zero. - // A cycle is indicated, if the number does not drop to zero after the Kahn's algorithm finishes. - size_t num_incoming_edges_left = 0; - // Sorting by the name, to be used when inserted into std::set. - bool operator==(const Prst &rhs) const { return this->name == rhs.name; } - bool operator< (const Prst &rhs) const { return this->name < rhs.name; } - }; - // Find the presets, store them into a std::map, addressed by their names. - std::set<Prst> presets; - std::string group_name_preset = group_name + ":"; - for (auto §ion : tree) - if (boost::starts_with(section.first, group_name_preset) && section.first.size() > group_name_preset.size()) - presets.emplace(section.first.substr(group_name_preset.size()), §ion.second); - // Fill in the "inherits" and "parent_of" members, report invalid inheritance fields. - for (const Prst &prst : presets) { - // Parse the list of comma separated values, possibly enclosed in quotes. - std::vector<std::string> inherits_names; - std::vector<std::string> inherits_system; - if (Slic3r::unescape_strings_cstyle(prst.node->get<std::string>("inherits", ""), inherits_names)) { - // Resolve the inheritance by name. - std::vector<Prst*> &inherits_nodes = const_cast<Prst&>(prst).inherits; - for (const std::string &node_name : inherits_names) { - auto it_system = std::lower_bound(system_profiles.begin(), system_profiles.end(), node_name); - if (it_system != system_profiles.end() && *it_system == node_name) { - // Loading a user config budnle, this preset is derived from a system profile. - inherits_system.emplace_back(node_name); - } else { - auto it = presets.find(Prst(node_name, nullptr)); - if (it == presets.end()) - BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits an unknown preset \"" << node_name << "\""; - else { - inherits_nodes.emplace_back(const_cast<Prst*>(&(*it))); - inherits_nodes.back()->parent_of.emplace_back(const_cast<Prst*>(&prst)); - } - } - } - } else { - BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has an invalid \"inherits\" field"; - } - // Remove the "inherits" key, it has no meaning outside of the config bundle. - const_cast<pt::ptree*>(prst.node)->erase("inherits"); - if (! inherits_system.empty()) { - // Loaded a user config bundle, where a profile inherits a system profile. - // User profile should be derived from a single system profile only. - assert(inherits_system.size() == 1); - if (inherits_system.size() > 1) - BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits from more than single system preset"; - prst.node->put("inherits", Slic3r::escape_string_cstyle(inherits_system.front())); - } - } - - // 2) Create a linear ordering for the directed acyclic graph of preset inheritance. - // https://en.wikipedia.org/wiki/Topological_sorting - // Kahn's algorithm. - std::vector<Prst*> sorted; - { - // Initialize S with the set of all nodes with no incoming edge. - std::deque<Prst*> S; - for (const Prst &prst : presets) - if (prst.inherits.empty()) - S.emplace_back(const_cast<Prst*>(&prst)); - else - const_cast<Prst*>(&prst)->num_incoming_edges_left = prst.inherits.size(); - while (! S.empty()) { - Prst *n = S.front(); - S.pop_front(); - sorted.emplace_back(n); - for (Prst *m : n->parent_of) { - assert(m->num_incoming_edges_left > 0); - if (-- m->num_incoming_edges_left == 0) { - // We have visited all parents of m. - S.emplace_back(m); - } - } - } - if (sorted.size() < presets.size()) { - for (const Prst &prst : presets) - if (prst.num_incoming_edges_left) - BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has cyclic dependencies"; - } - } - - // Apply the dependencies in their topological ordering. - for (Prst *prst : sorted) { - // Merge the preset nodes in their order of application. - // Iterate in a reverse order, so the last change will be placed first in merged. - for (auto it_inherits = prst->inherits.rbegin(); it_inherits != prst->inherits.rend(); ++ it_inherits) - for (auto it = (*it_inherits)->node->begin(); it != (*it_inherits)->node->end(); ++ it) - if (it->first == "renamed_from") { - // Don't inherit "renamed_from" flag, it does not make sense. The "renamed_from" flag only makes sense for a concrete preset. - if (boost::starts_with((*it_inherits)->name, "*")) - BOOST_LOG_TRIVIAL(error) << boost::format("Nonpublic intermediate preset %1% contains a \"renamed_from\" field, which is ignored") % (*it_inherits)->name; - } else if (prst->node->find(it->first) == prst->node->not_found()) - prst->node->add_child(it->first, it->second); - } - - // Remove the "internal" presets from the ptree. These presets are marked with '*'. - group_name_preset += '*'; - for (auto it_section = tree.begin(); it_section != tree.end(); ) { - if (boost::starts_with(it_section->first, group_name_preset) && it_section->first.size() > group_name_preset.size()) - // Remove the "internal" preset from the ptree. - it_section = tree.erase(it_section); - else - // Keep the preset. - ++ it_section; - } -} - -// preset_bundle is set when loading user config bundles, which must not overwrite the system profiles. -static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const PresetBundle *preset_bundle) -{ - flatten_configbundle_hierarchy(tree, "print", preset_bundle ? preset_bundle->prints.system_preset_names() : std::vector<std::string>()); - flatten_configbundle_hierarchy(tree, "filament", preset_bundle ? preset_bundle->filaments.system_preset_names() : std::vector<std::string>()); - flatten_configbundle_hierarchy(tree, "sla_print", preset_bundle ? preset_bundle->sla_prints.system_preset_names() : std::vector<std::string>()); - flatten_configbundle_hierarchy(tree, "sla_material", preset_bundle ? preset_bundle->sla_materials.system_preset_names() : std::vector<std::string>()); - flatten_configbundle_hierarchy(tree, "printer", preset_bundle ? preset_bundle->printers.system_preset_names() : std::vector<std::string>()); -} - -// Load a config bundle file, into presets and store the loaded presets into separate files -// of the local configuration directory. -size_t PresetBundle::load_configbundle(const std::string &path, unsigned int flags) -{ - if (flags & (LOAD_CFGBNDLE_RESET_USER_PROFILE | LOAD_CFGBNDLE_SYSTEM)) - // Reset this bundle, delete user profile files if LOAD_CFGBNDLE_SAVE. - this->reset(flags & LOAD_CFGBNDLE_SAVE); - - // 1) Read the complete config file into a boost::property_tree. - namespace pt = boost::property_tree; - pt::ptree tree; - boost::nowide::ifstream ifs(path); - pt::read_ini(ifs, tree); - - const VendorProfile *vendor_profile = nullptr; - if (flags & (LOAD_CFGBNDLE_SYSTEM | LOAD_CFGBUNDLE_VENDOR_ONLY)) { - auto vp = VendorProfile::from_ini(tree, path); - if (vp.models.size() == 0) { - BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No printer model defined.") % path; - return 0; - } else if (vp.num_variants() == 0) { - BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No printer variant defined") % path; - return 0; - } - vendor_profile = &this->vendors.insert({vp.id, vp}).first->second; - } - - if (flags & LOAD_CFGBUNDLE_VENDOR_ONLY) { - return 0; - } - - // 1.5) Flatten the config bundle by applying the inheritance rules. Internal profiles (with names starting with '*') are removed. - // If loading a user config bundle, do not flatten with the system profiles, but keep the "inherits" flag intact. - flatten_configbundle_hierarchy(tree, ((flags & LOAD_CFGBNDLE_SYSTEM) == 0) ? this : nullptr); - - // 2) Parse the property_tree, extract the active preset names and the profiles, save them into local config files. - // Parse the obsolete preset names, to be deleted when upgrading from the old configuration structure. - std::vector<std::string> loaded_prints; - std::vector<std::string> loaded_filaments; - std::vector<std::string> loaded_sla_prints; - std::vector<std::string> loaded_sla_materials; - std::vector<std::string> loaded_printers; - std::string active_print; - std::vector<std::string> active_filaments; - std::string active_sla_print; - std::string active_sla_material; - std::string active_printer; - size_t presets_loaded = 0; - for (const auto §ion : tree) { - PresetCollection *presets = nullptr; - std::vector<std::string> *loaded = nullptr; - std::string preset_name; - if (boost::starts_with(section.first, "print:")) { - presets = &this->prints; - loaded = &loaded_prints; - preset_name = section.first.substr(6); - } else if (boost::starts_with(section.first, "filament:")) { - presets = &this->filaments; - loaded = &loaded_filaments; - preset_name = section.first.substr(9); - } else if (boost::starts_with(section.first, "sla_print:")) { - presets = &this->sla_prints; - loaded = &loaded_sla_prints; - preset_name = section.first.substr(10); - } else if (boost::starts_with(section.first, "sla_material:")) { - presets = &this->sla_materials; - loaded = &loaded_sla_materials; - preset_name = section.first.substr(13); - } else if (boost::starts_with(section.first, "printer:")) { - presets = &this->printers; - loaded = &loaded_printers; - preset_name = section.first.substr(8); - } else if (section.first == "presets") { - // Load the names of the active presets. - for (auto &kvp : section.second) { - if (kvp.first == "print") { - active_print = kvp.second.data(); - } else if (boost::starts_with(kvp.first, "filament")) { - int idx = 0; - if (kvp.first == "filament" || sscanf(kvp.first.c_str(), "filament_%d", &idx) == 1) { - if (int(active_filaments.size()) <= idx) - active_filaments.resize(idx + 1, std::string()); - active_filaments[idx] = kvp.second.data(); - } - } else if (kvp.first == "sla_print") { - active_sla_print = kvp.second.data(); - } else if (kvp.first == "sla_material") { - active_sla_material = kvp.second.data(); - } else if (kvp.first == "printer") { - active_printer = kvp.second.data(); - } - } - } else if (section.first == "obsolete_presets") { - // Parse the names of obsolete presets. These presets will be deleted from user's - // profile directory on installation of this vendor preset. - for (auto &kvp : section.second) { - std::vector<std::string> *dst = nullptr; - if (kvp.first == "print") - dst = &this->obsolete_presets.prints; - else if (kvp.first == "filament") - dst = &this->obsolete_presets.filaments; - else if (kvp.first == "sla_print") - dst = &this->obsolete_presets.sla_prints; - else if (kvp.first == "sla_material") - dst = &this->obsolete_presets.sla_materials; - else if (kvp.first == "printer") - dst = &this->obsolete_presets.printers; - if (dst) - unescape_strings_cstyle(kvp.second.data(), *dst); - } - } else if (section.first == "settings") { - // Load the settings. - for (auto &kvp : section.second) { - if (kvp.first == "autocenter") { - } - } - } else - // Ignore an unknown section. - continue; - if (presets != nullptr) { - // Load the print, filament or printer preset. - const DynamicPrintConfig *default_config = nullptr; - DynamicPrintConfig config; - std::string alias_name; - std::vector<std::string> renamed_from; - auto parse_config_section = [§ion, &alias_name, &renamed_from, &path](DynamicPrintConfig &config) { - for (auto &kvp : section.second) { - if (kvp.first == "alias") - alias_name = kvp.second.data(); - else if (kvp.first == "renamed_from") { - if (! unescape_strings_cstyle(kvp.second.data(), renamed_from)) { - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The preset \"" << - section.first << "\" contains invalid \"renamed_from\" key, which is being ignored."; - } - } - config.set_deserialize(kvp.first, kvp.second.data()); - } - }; - if (presets == &this->printers) { - // Select the default config based on the printer_technology field extracted from kvp. - DynamicPrintConfig config_src; - parse_config_section(config_src); - default_config = &presets->default_preset_for(config_src).config; - config = *default_config; - config.apply(config_src); - } else { - default_config = &presets->default_preset().config; - config = *default_config; - parse_config_section(config); - } - Preset::normalize(config); - // Report configuration fields, which are misplaced into a wrong group. - std::string incorrect_keys = Preset::remove_invalid_keys(config, *default_config); - if (! incorrect_keys.empty()) - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << - section.first << "\" contains the following incorrect keys: " << incorrect_keys << ", which were removed"; - if ((flags & LOAD_CFGBNDLE_SYSTEM) && presets == &printers) { - // Filter out printer presets, which are not mentioned in the vendor profile. - // These presets are considered not installed. - auto printer_model = config.opt_string("printer_model"); - if (printer_model.empty()) { - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << - section.first << "\" defines no printer model, it will be ignored."; - continue; - } - auto printer_variant = config.opt_string("printer_variant"); - if (printer_variant.empty()) { - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << - section.first << "\" defines no printer variant, it will be ignored."; - continue; - } - auto it_model = std::find_if(vendor_profile->models.cbegin(), vendor_profile->models.cend(), - [&](const VendorProfile::PrinterModel &m) { return m.id == printer_model; } - ); - if (it_model == vendor_profile->models.end()) { - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << - section.first << "\" defines invalid printer model \"" << printer_model << "\", it will be ignored."; - continue; - } - auto it_variant = it_model->variant(printer_variant); - if (it_variant == nullptr) { - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << - section.first << "\" defines invalid printer variant \"" << printer_variant << "\", it will be ignored."; - continue; - } - const Preset *preset_existing = presets->find_preset(section.first, false); - if (preset_existing != nullptr) { - BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << - section.first << "\" has already been loaded from another Confing Bundle."; - continue; - } - } else if ((flags & LOAD_CFGBNDLE_SYSTEM) == 0) { - // This is a user config bundle. - const Preset *existing = presets->find_preset(preset_name, false); - if (existing != nullptr) { - if (existing->is_system) { - assert(existing->vendor != nullptr); - BOOST_LOG_TRIVIAL(error) << "Error in a user provided Config Bundle \"" << path << "\": The " << presets->name() << " preset \"" << - existing->name << "\" is a system preset of vendor " << existing->vendor->name << " and it will be ignored."; - continue; - } else { - assert(existing->vendor == nullptr); - BOOST_LOG_TRIVIAL(trace) << "A " << presets->name() << " preset \"" << existing->name << "\" was overwritten with a preset from user Config Bundle \"" << path << "\""; - } - } else { - BOOST_LOG_TRIVIAL(trace) << "A new " << presets->name() << " preset \"" << preset_name << "\" was imported from user Config Bundle \"" << path << "\""; - } - } - // Decide a full path to this .ini file. - auto file_name = boost::algorithm::iends_with(preset_name, ".ini") ? preset_name : preset_name + ".ini"; - auto file_path = (boost::filesystem::path(data_dir()) -#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR - // Store the print/filament/printer presets into a "presets" directory. - / "presets" -#else - // Store the print/filament/printer presets at the same location as the upstream Slic3r. -#endif - / presets->section_name() / file_name).make_preferred(); - // Load the preset into the list of presets, save it to disk. - Preset &loaded = presets->load_preset(file_path.string(), preset_name, std::move(config), false); - if (flags & LOAD_CFGBNDLE_SAVE) - loaded.save(); - if (flags & LOAD_CFGBNDLE_SYSTEM) { - loaded.is_system = true; - loaded.vendor = vendor_profile; - } - - // Derive the profile logical name aka alias from the preset name if the alias was not stated explicitely. - if (alias_name.empty()) { - size_t end_pos = preset_name.find_first_of("@"); - if (end_pos != std::string::npos) { - alias_name = preset_name.substr(0, end_pos); - if (renamed_from.empty()) - // Add the preset name with the '@' character removed into the "renamed_from" list. - renamed_from.emplace_back(alias_name + preset_name.substr(end_pos + 1)); - boost::trim_right(alias_name); - } - } - if (alias_name.empty()) - loaded.alias = preset_name; - else - loaded.alias = std::move(alias_name); - loaded.renamed_from = std::move(renamed_from); - - ++ presets_loaded; - } - } - - // 3) Activate the presets. - if ((flags & LOAD_CFGBNDLE_SYSTEM) == 0) { - if (! active_print.empty()) - prints.select_preset_by_name(active_print, true); - if (! active_sla_print.empty()) - sla_materials.select_preset_by_name(active_sla_print, true); - if (! active_sla_material.empty()) - sla_materials.select_preset_by_name(active_sla_material, true); - if (! active_printer.empty()) - printers.select_preset_by_name(active_printer, true); - // Activate the first filament preset. - if (! active_filaments.empty() && ! active_filaments.front().empty()) - filaments.select_preset_by_name(active_filaments.front(), true); - this->update_multi_material_filament_presets(); - for (size_t i = 0; i < std::min(this->filament_presets.size(), active_filaments.size()); ++ i) - this->filament_presets[i] = filaments.find_preset(active_filaments[i], true)->name; - this->update_compatible(PresetSelectCompatibleType::Never); - } - - return presets_loaded; -} - -void PresetBundle::update_multi_material_filament_presets() -{ - if (printers.get_edited_preset().printer_technology() != ptFFF) - return; - - // Verify and select the filament presets. - auto *nozzle_diameter = static_cast<const ConfigOptionFloats*>(printers.get_edited_preset().config.option("nozzle_diameter")); - size_t num_extruders = nozzle_diameter->values.size(); - // Verify validity of the current filament presets. - for (size_t i = 0; i < std::min(this->filament_presets.size(), num_extruders); ++ i) - this->filament_presets[i] = this->filaments.find_preset(this->filament_presets[i], true)->name; - // Append the rest of filament presets. - this->filament_presets.resize(num_extruders, this->filament_presets.empty() ? this->filaments.first_visible().name : this->filament_presets.back()); - - // Now verify if wiping_volumes_matrix has proper size (it is used to deduce number of extruders in wipe tower generator): - std::vector<double> old_matrix = this->project_config.option<ConfigOptionFloats>("wiping_volumes_matrix")->values; - size_t old_number_of_extruders = size_t(sqrt(old_matrix.size())+EPSILON); - if (num_extruders != old_number_of_extruders) { - // First verify if purging volumes presets for each extruder matches number of extruders - std::vector<double>& extruders = this->project_config.option<ConfigOptionFloats>("wiping_volumes_extruders")->values; - while (extruders.size() < 2*num_extruders) { - extruders.push_back(extruders.size()>1 ? extruders[0] : 50.); // copy the values from the first extruder - extruders.push_back(extruders.size()>1 ? extruders[1] : 50.); - } - while (extruders.size() > 2*num_extruders) { - extruders.pop_back(); - extruders.pop_back(); - } - - std::vector<double> new_matrix; - for (unsigned int i=0;i<num_extruders;++i) - for (unsigned int j=0;j<num_extruders;++j) { - // append the value for this pair from the old matrix (if it's there): - if (i<old_number_of_extruders && j<old_number_of_extruders) - new_matrix.push_back(old_matrix[i*old_number_of_extruders + j]); - else - new_matrix.push_back( i==j ? 0. : extruders[2*i]+extruders[2*j+1]); // so it matches new extruder volumes - } - this->project_config.option<ConfigOptionFloats>("wiping_volumes_matrix")->values = new_matrix; - } -} - -void PresetBundle::update_compatible(PresetSelectCompatibleType select_other_print_if_incompatible, PresetSelectCompatibleType select_other_filament_if_incompatible) -{ - const Preset &printer_preset = this->printers.get_edited_preset(); - const PresetWithVendorProfile printer_preset_with_vendor_profile = this->printers.get_preset_with_vendor_profile(printer_preset); - - switch (printer_preset.printer_technology()) { - case ptFFF: - { - assert(printer_preset.config.has("default_print_profile")); - assert(printer_preset.config.has("default_filament_profile")); - const std::string &prefered_print_profile = printer_preset.config.opt_string("default_print_profile"); - const std::vector<std::string> &prefered_filament_profiles = printer_preset.config.option<ConfigOptionStrings>("default_filament_profile")->values; - prefered_print_profile.empty() ? - this->prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible) : - this->prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible, - [&prefered_print_profile](const std::string& profile_name) { return profile_name == prefered_print_profile; }); - const PresetWithVendorProfile print_preset_with_vendor_profile = this->prints.get_edited_preset_with_vendor_profile(); - // Remember whether the filament profiles were compatible before updating the filament compatibility. - std::vector<char> filament_preset_was_compatible(this->filament_presets.size(), false); - for (size_t idx = 0; idx < this->filament_presets.size(); ++ idx) { - std::string &filament_name = this->filament_presets[idx]; - Preset *preset = this->filaments.find_preset(filament_name, false); - filament_preset_was_compatible[idx] = preset != nullptr && preset->is_compatible; - } - prefered_filament_profiles.empty() ? - this->filaments.update_compatible(printer_preset_with_vendor_profile, &print_preset_with_vendor_profile, select_other_filament_if_incompatible) : - this->filaments.update_compatible(printer_preset_with_vendor_profile, &print_preset_with_vendor_profile, select_other_filament_if_incompatible, - [&prefered_filament_profiles](const std::string& profile_name) - { return std::find(prefered_filament_profiles.begin(), prefered_filament_profiles.end(), profile_name) != prefered_filament_profiles.end(); }); - if (select_other_filament_if_incompatible != PresetSelectCompatibleType::Never) { - // Verify validity of the current filament presets. - if (this->filament_presets.size() == 1) { - if (select_other_filament_if_incompatible == PresetSelectCompatibleType::Always || filament_preset_was_compatible.front()) - this->filament_presets.front() = this->filaments.get_edited_preset().name; - } else { - for (size_t idx = 0; idx < this->filament_presets.size(); ++ idx) { - std::string &filament_name = this->filament_presets[idx]; - Preset *preset = this->filaments.find_preset(filament_name, false); - if (preset == nullptr || (! preset->is_compatible && (select_other_filament_if_incompatible == PresetSelectCompatibleType::Always || filament_preset_was_compatible[idx]))) { - // Pick a compatible profile. If there are prefered_filament_profiles, use them. - if (prefered_filament_profiles.empty()) - filament_name = this->filaments.first_compatible().name; - else { - const std::string &preferred = (idx < prefered_filament_profiles.size()) ? - prefered_filament_profiles[idx] : prefered_filament_profiles.front(); - filament_name = this->filaments.first_compatible( - [&preferred](const std::string& profile_name) { return profile_name == preferred; }).name; - } - } - } - } - } - break; - } - case ptSLA: - { - assert(printer_preset.config.has("default_sla_print_profile")); - assert(printer_preset.config.has("default_sla_material_profile")); - const PresetWithVendorProfile sla_print_preset_with_vendor_profile = this->sla_prints.get_edited_preset_with_vendor_profile(); - const std::string &prefered_sla_print_profile = printer_preset.config.opt_string("default_sla_print_profile"); - (prefered_sla_print_profile.empty()) ? - this->sla_prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible) : - this->sla_prints.update_compatible(printer_preset_with_vendor_profile, nullptr, select_other_print_if_incompatible, - [&prefered_sla_print_profile](const std::string& profile_name){ return profile_name == prefered_sla_print_profile; }); - const std::string &prefered_sla_material_profile = printer_preset.config.opt_string("default_sla_material_profile"); - prefered_sla_material_profile.empty() ? - this->sla_materials.update_compatible(printer_preset_with_vendor_profile, &sla_print_preset_with_vendor_profile, select_other_filament_if_incompatible) : - this->sla_materials.update_compatible(printer_preset_with_vendor_profile, &sla_print_preset_with_vendor_profile, select_other_filament_if_incompatible, - [&prefered_sla_material_profile](const std::string& profile_name){ return profile_name == prefered_sla_material_profile; }); - break; - } - default: break; - } -} - -void PresetBundle::export_configbundle(const std::string &path, bool export_system_settings) -{ - boost::nowide::ofstream c; - c.open(path, std::ios::out | std::ios::trunc); - - // Put a comment at the first line including the time stamp and Slic3r version. - c << "# " << Slic3r::header_slic3r_generated() << std::endl; - - // Export the print, filament and printer profiles. - - for (const PresetCollection *presets : { - (const PresetCollection*)&this->prints, (const PresetCollection*)&this->filaments, - (const PresetCollection*)&this->sla_prints, (const PresetCollection*)&this->sla_materials, - (const PresetCollection*)&this->printers }) { - for (const Preset &preset : (*presets)()) { - if (preset.is_default || preset.is_external || (preset.is_system && ! export_system_settings)) - // Only export the common presets, not external files or the default preset. - continue; - c << std::endl << "[" << presets->section_name() << ":" << preset.name << "]" << std::endl; - for (const std::string &opt_key : preset.config.keys()) - c << opt_key << " = " << preset.config.opt_serialize(opt_key) << std::endl; - } - } - - // Export the names of the active presets. - c << std::endl << "[presets]" << std::endl; - c << "print = " << this->prints.get_selected_preset_name() << std::endl; - c << "sla_print = " << this->sla_prints.get_selected_preset_name() << std::endl; - c << "sla_material = " << this->sla_materials.get_selected_preset_name() << std::endl; - c << "printer = " << this->printers.get_selected_preset_name() << std::endl; - for (size_t i = 0; i < this->filament_presets.size(); ++ i) { - char suffix[64]; - if (i > 0) - sprintf(suffix, "_%d", (int)i); - else - suffix[0] = 0; - c << "filament" << suffix << " = " << this->filament_presets[i] << std::endl; - } - -#if 0 - // Export the following setting values from the provided setting repository. - static const char *settings_keys[] = { "autocenter" }; - c << "[settings]" << std::endl; - for (size_t i = 0; i < sizeof(settings_keys) / sizeof(settings_keys[0]); ++ i) - c << settings_keys[i] << " = " << settings.serialize(settings_keys[i]) << std::endl; -#endif - - c.close(); -} - -// Set the filament preset name. As the name could come from the UI selection box, -// an optional "(modified)" suffix will be removed from the filament name. -void PresetBundle::set_filament_preset(size_t idx, const std::string &name) -{ - if (idx >= filament_presets.size()) - filament_presets.resize(idx + 1, filaments.default_preset().name); - filament_presets[idx] = Preset::remove_suffix_modified(name); -} - -void PresetBundle::set_default_suppressed(bool default_suppressed) -{ - prints.set_default_suppressed(default_suppressed); - filaments.set_default_suppressed(default_suppressed); - sla_prints.set_default_suppressed(default_suppressed); - sla_materials.set_default_suppressed(default_suppressed); - printers.set_default_suppressed(default_suppressed); -} - -} // namespace Slic3r |