From e0933786e35b044b1694e5c1c4d4458de978ecb2 Mon Sep 17 00:00:00 2001 From: YuSanka Date: Thu, 15 Feb 2018 17:30:33 +0100 Subject: Marked string used at localization. * Correct save changed color --- resources/localization/cs_CZ/Slic3rPE.mo | Bin 0 -> 65809 bytes resources/localization/cs_CZ/Slic3rPE_cs.po | 2714 ++++++++++++++++++++++++ resources/localization/en_US/Slic3rPE.mo | Bin 7892 -> 76600 bytes resources/localization/en_US/Slic3rPE_en.po | 3032 ++++++++++++++++++++++++--- resources/localization/uk/Slic3rPE.mo | Bin 10300 -> 54408 bytes 5 files changed, 5463 insertions(+), 283 deletions(-) create mode 100644 resources/localization/cs_CZ/Slic3rPE.mo create mode 100644 resources/localization/cs_CZ/Slic3rPE_cs.po (limited to 'resources') diff --git a/resources/localization/cs_CZ/Slic3rPE.mo b/resources/localization/cs_CZ/Slic3rPE.mo new file mode 100644 index 000000000..b333ae0c9 Binary files /dev/null and b/resources/localization/cs_CZ/Slic3rPE.mo differ diff --git a/resources/localization/cs_CZ/Slic3rPE_cs.po b/resources/localization/cs_CZ/Slic3rPE_cs.po new file mode 100644 index 000000000..28d150758 --- /dev/null +++ b/resources/localization/cs_CZ/Slic3rPE_cs.po @@ -0,0 +1,2714 @@ +# Copyright (C) 2018 THE Slic3rPE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the Slic3rPE package. +# Oleksandra Iushchenko , 2018. +# +msgid "" +msgstr "" +"Project-Id-Version: SLIC3R PE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2018-02-13 17:18+0100\n" +"PO-Revision-Date: 2018-02-15 16:08+0100\n" +"Last-Translator: Oleksandra Iushchenko \n" +"Language-Team: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: Poedit 2.0.6\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +"Language: cs_CZ\n" +"X-Poedit-KeywordsList: _L\n" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:50 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1188 +msgid "Size" +msgstr "Rozměr" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:51 +msgid "Size in X and Y of the rectangular plate." +msgstr "Rozměr tiskové podložky v ose X a Y." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:57 +msgid "Origin" +msgstr "Origin" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:58 +msgid "" +"Distance of the 0,0 G-code coordinate from the front left corner of the " +"rectangle." +msgstr "Vzdálenost souřadnice 0,0 G-kódu od předního levého rohu obdélníku." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:65 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:133 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:204 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:215 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:329 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:340 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:359 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:438 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:783 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:803 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:862 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:880 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:898 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1046 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1054 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1096 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1105 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1115 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1123 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1131 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1217 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1423 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1493 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1529 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1706 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1713 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1720 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1729 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1739 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1749 +msgid "mm" +msgstr "mm" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:66 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:435 +msgid "Diameter" +msgstr "Průměr" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:67 +msgid "" +"Diameter of the print bed. It is assumed that origin (0,0) is located in the " +"center." +msgstr "" +"Průměr tiskové podložky.Přepokládaná souřadnice 0,0 je umístěna uprostřed." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:965 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:312 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:704 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:960 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1274 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1447 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1473 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:432 +msgid "Extruders" +msgstr "Extrudér" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:966 +msgid "Number of extruders of the printer." +msgstr "Počet extrudérů tiskárny." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:30 +msgid "Avoid crossing perimeters" +msgstr "Vyhnout se přejíždění perimetrů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:31 +msgid "" +"Optimize travel moves in order to minimize the crossing of perimeters. This " +"is mostly useful with Bowden extruders which suffer from oozing. This " +"feature slows down both the print and the G-code generation." +msgstr "" +"Optimalizovat přesuny do pořadí aby se minimalizovalo přejíždění perimetrů. " +"Nejvíce užitečné u Bowdenových extruderů které trpí na vytékáné filamentu. " +"Toto nastavení zpomaluje tisk i generování G-kódu." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:38 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:939 +msgid "Bed shape" +msgstr "Tvar tiskové podložky" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:42 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1574 +msgid "Other layers" +msgstr "Ostatní vrstvy" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:43 +msgid "" +"Bed temperature for layers after the first one. Set this to zero to disable " +"bed temperature control commands in the output." +msgstr "" +"Teplota tiskové podložky pro další vrstvy po první vrstvě. Nastavením na " +"hodnotu nula vypnete ovládací příkazy teploty tiskové podložky ve výstupu." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:46 +msgid "Bed temperature" +msgstr "Teplota tiskové podložky" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:52 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1131 +msgid "Before layer change G-code" +msgstr "Before layer change G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:53 +msgid "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as [layer_num] and [layer_z]." +msgstr "" +"Tento upravený kód je vložen pro každou změnu vrstvy, předtím než se pohne " +"Z. Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru stejně " +"tak jako [layer_num] a [layer_z]." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:63 +msgid "Between objects G-code" +msgstr "G-kód mezi objekty" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:64 +msgid "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S[first_layer_temperature]\" command wherever you want." +msgstr "" +"Tento kód je vložen mezi objekty, pokud je použit sekvenční tisk. Ve " +"výchozím nastavení je resetován extrudér a tisková podložka pomocí non-wait " +"(nečekacím) příkazem; nicméně pokud jsou příkazy M104, M109, 140 nebo M190 " +"detekovány v tomto upraveném kódu, Slic3r nebude přidávat teplotní příkazy. " +"Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru, takže " +"můžete vložit příkaz “M109 S[first_layer_temperature]” kamkoliv chcete." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:72 +msgid "Bottom" +msgstr "Spodek" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:73 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:243 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:294 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:302 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:606 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:764 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:780 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:943 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:991 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1154 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1585 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1641 +msgid "Layers and Perimeters" +msgstr "Vrstvy a perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:74 +msgid "Number of solid layers to generate on bottom surfaces." +msgstr "Počet plných vrstev." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:76 +msgid "Bottom solid layers" +msgstr "Plné spodní vrstvy" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:81 +msgid "Bridge" +msgstr "Most" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:82 +msgid "" +"This is the acceleration your printer will use for bridges. Set zero to " +"disable acceleration control for bridges." +msgstr "" +"Nastavení akcelerace tiskárny při vytváření mostů. Nastavením na nulu " +"vypnete ovládání akcelerace pro mosty." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:84 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:178 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:578 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:686 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:954 +msgid "mm/s\\u00B2" +msgstr "mm/s\\u00B2" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:90 +msgid "Bridging angle" +msgstr "Úhel vytváření mostů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:91 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:251 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:492 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:506 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:544 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:683 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:693 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:711 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:729 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:748 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1265 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1282 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:347 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:348 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:664 +msgid "Infill" +msgstr "Výplň" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:92 +msgid "" +"Bridging angle override. If left to zero, the bridging angle will be " +"calculated automatically. Otherwise the provided angle will be used for all " +"bridges. Use 180\\u00B0 for zero angle." +msgstr "" +"Přepsání úhlu vytváření mostů. Nastavením hodnoty na nulu se bude úhel " +"vytváření mostů vypočítávat automaticky. Při zadání jiného úhlu, bude pro " +"všechny mosty použitý zadaný úhel. Pro nulový úhel zadejte 180\\u00B0." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:95 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:496 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1172 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1183 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1403 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1559 +msgid "\\u00B0" +msgstr "\\u00B0" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:101 +msgid "Bridges fan speed" +msgstr "Rychlost ventilátoru při vytváření mostů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:102 +msgid "This fan speed is enforced during all bridges and overhangs." +msgstr "" +"Nastavená rychlost ventilátoru je využita vždy při vytváření mostů a přesahů." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:103 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:508 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:791 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:852 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1062 +msgid "%" +msgstr "%" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:110 +msgid "Bridge flow ratio" +msgstr "Poměr průtoku při vytváření mostů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:111 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:212 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:738 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1735 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:343 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:357 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:450 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:453 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:830 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1112 +msgid "Advanced" +msgstr "Pokročilé" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:112 +msgid "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this." +msgstr "" +"Tato hodnota určuje množství vytlačeného plastu při vytváření mostů. Mírným " +"šnížením této hodnoty můžete předejít pronášení ikdyž, přednastavené hodnoty " +"jsou většinou dobré a je lepší experimentovat s chlazením (využitím " +"ventilátoru), než s touto hodnotou." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:121 +msgid "Bridges" +msgstr "Mosty" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:122 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:282 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:637 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:749 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:981 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1203 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1253 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1304 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1627 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:399 +msgid "Speed" +msgstr "Rychlost" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:123 +msgid "Speed for printing bridges." +msgstr "Rychlost pro vytváření mostů." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:124 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:640 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:751 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:813 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:870 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:983 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1139 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1148 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1538 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1651 +msgid "mm/s" +msgstr "mm/s" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:131 +msgid "Brim width" +msgstr "Okraj první vrstvy" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:132 +msgid "" +"Horizontal width of the brim that will be printed around each object on the " +"first layer." +msgstr "Šírka okraje první vrsty která bude vytištěna okolo každého objektu." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:139 +msgid "Clip multi-part objects" +msgstr "Připnutí objektů z více částí k sobě" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:140 +msgid "" +"When printing multi-material objects, this settings will make slic3r to clip " +"the overlapping object parts one by the other (2nd part will be clipped by " +"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." +msgstr "" +"Připnutí překrývajících se objektů jednek druhému při multi-materiálovém " +"tisku. (Druhá část se připne k první, třetí část k první a druhé, atd)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:147 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:510 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:868 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1673 +msgid "Compatible printers" +msgstr "Kompatibilní tiskárny" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:151 +msgid "Compatible printers condition" +msgstr "Stav kompatibilních tiskáren" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:152 +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:158 +msgid "Complete individual objects" +msgstr "Dokončení individuálních objektů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:159 +msgid "" +"When printing multiple objects or copies, this feature will complete each " +"object before moving onto next one (and starting it from its bottom layer). " +"This feature is useful to avoid the risk of ruined prints. Slic3r should " +"warn and prevent you from extruder collisions, but beware." +msgstr "" +"Při tisku více objektů nebo kopií tiskárna kompletně dokončí jeden objekt, " +"předtím než začne tisknout druhý (začíná od spodní vstvy). Tato vlastnost je " +"výhodná z důvodů snížení rizika zničených výtisků. Slic3r by měl varovat při " +"možné kolizi extrudéru s objektem a zabránit mu, přesto doporučujeme " +"obezřetnost." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:167 +msgid "Enable auto cooling" +msgstr "Zapnutí automatického chlazení" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:168 +msgid "" +"This flag enables the automatic cooling logic that adjusts print speed and " +"fan speed according to layer printing time." +msgstr "" +"Zapíná výpočet automatického chlazení který upravuje rychlost tisku a " +"ventilátoru v závislosti na délce tisku jedné vstvy." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:174 +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:293 +msgid "Default" +msgstr "Výchozí" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:175 +msgid "" +"This is the acceleration your printer will be reset to after the role-" +"specific acceleration values are used (perimeter/infill). Set zero to " +"prevent resetting acceleration at all." +msgstr "" +"Toto je hodnota akcelerace na kterou se tiskárna vrátí po specifických " +"úpravách akcelerace například při tisku (perimetru/výplně). Nastavením na " +"nulu zabráníte návratu rychlostí zcela." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:184 +msgid "Disable fan for the first" +msgstr "Vypnutí chlazení pro prvních" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:185 +msgid "" +"You can set this to a positive value to disable fan at all during the first " +"layers, so that it does not make adhesion worse." +msgstr "" +"Nastavením počtu prvních vstev s vypnutým chlazením pro nezhoršování " +"přilnavosti." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:187 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:696 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1035 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1226 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1287 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1439 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1484 +msgid "layers" +msgstr "vrstev" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:194 +msgid "Don't support bridges" +msgstr "Nevytvářet podpory pod mosty" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:195 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1032 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1382 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1389 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1401 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1411 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1419 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1434 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1455 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1466 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1482 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1491 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1500 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1511 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1527 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1535 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1536 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1545 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1553 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1567 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:375 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:376 +msgid "Support material" +msgstr "Podpory" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:196 +msgid "" +"Experimental option for preventing support material from being generated " +"under bridged areas." +msgstr "" +"Experimentální nastavení pro zabránění tvorbě podpěr v oblastech po mosty." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:202 +msgid "Distance between copies" +msgstr "Vzdálenost mezi kopiemi" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:203 +msgid "Distance used for the auto-arrange feature of the plater." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:211 +msgid "Elefant foot compensation" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:213 +msgid "" +"The first layer will be shrunk in the XY plane by the configured value to " +"compensate for the 1st layer squish aka an Elefant Foot effect." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:221 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:231 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:852 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1125 +msgid "End G-code" +msgstr "Konec G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:222 +msgid "" +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." +msgstr "" +"Tato ukončovací procedůra je vložena na konec výstupního souboru. Můžete " +"přidávat zástupné proměnné pro veškeré nastavení Slic3ru." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:232 +msgid "" +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode. Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." +msgstr "" +"Tato ukončovací procedůra je vložena na konec výstupního souboru, před " +"konečným g-kódem tiskárny. Můžete přidávat zástupné proměnné pro veškeré " +"nastavení Slic3ru. Pokud máte tiskárnu s více extrudéry, g-kód je zpracován " +"v pořadí extrudérů." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:242 +msgid "Ensure vertical shell thickness" +msgstr "Zajistit vertikální tloušťku obalu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:244 +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers)." +msgstr "" +"Přidá plnou výplň u šikmých ploch pro garanci vertikální tloušťku obalu " +"(vrchní a podní plné vrstvy)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:250 +msgid "Top/bottom fill pattern" +msgstr "Vzor výplně vrchních/spodních vrstev" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:252 +#, fuzzy +msgid "" +"Fill pattern for top/bottom infill. This only affects the external visible " +"layer, and not its adjacent solid shells." +msgstr "" +"Vzor výplně pro vrchní/spodní vrstvy. Ovlivňuje pouze vnější viditelné " +"vrstvy. Neovlivňuje přilehlé plné obaly." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:271 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:281 +msgid "External perimeters" +msgstr "Vnější perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:272 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:381 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:594 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:712 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:969 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1294 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1456 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1616 +msgid "Extrusion Width" +msgstr "Šíře extruze" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:273 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " +"(for example 200%), it will be computed over layer height." +msgstr "" +"Nastavení na kladnou hodnotu, definuje šířku manuální extruze pro vnější " +"obvod. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je " +"nastavena, jinak se použije průměr trysky 1,125 x. Pokud je hodnota " +"vyjádřena jako procento (například 200%), vypočítá se podle výšky vrstvy." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:276 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:599 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:717 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:974 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1298 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1460 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1621 +msgid "mm or % (leave 0 for default)" +msgstr "mm nebo % (ponechte 0 jako výchozí)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:283 +msgid "" +"This separate setting will affect the speed of external perimeters (the " +"visible ones). If expressed as percentage (for example: 80%) it will be " +"calculated on the perimeters speed setting above. Set to zero for auto." +msgstr "" +"Toto oddělené nastavení ovlivní rychlost tisku vnějších perimetrů (těch " +"viditelných). Pokud je hodnota vyjádřena procenty (například: 80%), bude " +"rychlost vypočítána z hodnoty rychlosti tisku perimetrů, nastavené výše. " +"Nastavte nulu pro automatický výpočet." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:286 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:621 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1257 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1308 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1503 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1633 +msgid "mm/s or %" +msgstr "mm nebo %" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:293 +msgid "External perimeters first" +msgstr "Nejprve tisknout vnější perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:295 +msgid "" +"Print contour perimeters from the outermost one to the innermost one instead " +"of the default inverse order." +msgstr "" +"Tisk obrysových perimetrů od vnějších po vnitřní namísto opačného výchozího " +"pořadí." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:301 +msgid "Extra perimeters if needed" +msgstr "Extra perimetry pokud jsou potřeba" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:303 +#, fuzzy, c-format +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported." +msgstr "" +"Přidání více perimetrů, pokud je potřeba, pro vyvarování se tvorbě mezer v " +"šikmých plochách. Slic3r pokračuje v přidávání perimetrů, dokud není " +"podepřeno více než 70% perimetrů v následující vrstvě." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:311 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:794 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1231 +msgid "Extruder" +msgstr "Extrudér" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:313 +msgid "" +"The extruder to use (unless more specific extruder settings are specified). " +"This value overrides perimeter and infill extruders, but not the support " +"extruders." +msgstr "" +"Extrudér, který chcete použít (pokud nejsou zvoleny specifičtější nastavení " +"extruderu). Tato hodnota přepíše nastavení perimetrového a výplňového " +"exrtuderu, ale ne nastavení extrudéru pro podpory." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:324 +msgid "Height" +msgstr "Výška" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:325 +msgid "" +"Set this to the vertical distance between your nozzle tip and (usually) the " +"X carriage rods. In other words, this is the height of the clearance " +"cylinder around your extruder, and it represents the maximum depth the " +"extruder can peek before colliding with other printed objects." +msgstr "" +"Zadejte vertikální vzdálenost mezi tryskou a (obvykle) tyčemi osy X. Jinými " +"slovy, je to výška kolizního prostoru okolo extrudéru a představuje " +"maximální hloubku, které může extrudér dosáhnout před kolizí s jinými, již " +"vytištěnými, objekty." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:335 +msgid "Radius" +msgstr "Rádius" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:336 +#, fuzzy +msgid "" +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the plater." +msgstr "" +"Zadejte horizontální rádius kolizního prostoru okolo extrudéru. Pokud tryska " +"není v centru tohoto rádiusu, zvolte nejdelší vzdálenost. Toto nastavení " +"slouží ke kontrole kolizí a zobrazení grafického náhledu v Plater." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:346 +msgid "Extruder Color" +msgstr "Barva extrudéru" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:347 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:410 +#, fuzzy +msgid "This is only used in the Slic3r interface as a visual help." +msgstr "Toto je ve Slic3ru jako názorná pomoc." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:354 +msgid "Extruder offset" +msgstr "Odsazení extrudéru" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:355 +msgid "" +"If your firmware doesn't handle the extruder displacement you need the G-" +"code to take it into account. This option lets you specify the displacement " +"of each extruder with respect to the first one. It expects positive " +"coordinates (they will be subtracted from the XY coordinate)." +msgstr "" +"Pokud firmware nezpracovává umístění extrudéru správně, potřebujete aby to " +"vzal G-kód v úvahu. Toto nastavení umožňuje určit odsazení každého extruderu " +"vzhledem k prvnímu. Očekávají se pozitivní souřadnice (budou odečteny od " +"souřadnice XY)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:364 +msgid "Extrusion axis" +msgstr "Osa extrudéru" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:365 +msgid "" +"Use this option to set the axis letter associated to your printer's extruder " +"(usually E but some printers use A)." +msgstr "" +"Touto volbou nastavíte písmeno osy přidružené k extruderu tiskárny (obvykle " +"E, ale některé tiskárny používají A)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:371 +msgid "Extrusion multiplier" +msgstr "Násobič extruze" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:372 +msgid "" +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 0.9 and 1.1. If you think you need to change this " +"more, check filament diameter and your firmware E steps." +msgstr "" +"Tento faktor mění poměrné množství toku. Možná bude třeba toto nastavení " +"vyladit, pro dosažení hezkého povrchu a správné šířky jednotlivých stěn. " +"Obvyklé hodnoty jsou mezi 0,9 a 1,1. Pokud si myslíte, že hodnotu " +"potřebujete změnit více, zkontrolujte průměr vlákna a E kroky ve firmwaru." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:380 +msgid "Default extrusion width" +msgstr "Výchozí šířka extruze" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:382 +msgid "" +"Set this to a non-zero value to allow a manual extrusion width. If left to " +"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " +"tooltips for perimeter extrusion width, infill extrusion width etc). If " +"expressed as percentage (for example: 230%), it will be computed over layer " +"height." +msgstr "" +"Nastavením kladné hodnoty povolíte manuální šířku extruze. Pokud je hodnota " +"ponechána na nule, Slic3r odvozuje šířku extruze z průměru trysky (viz " +"nápovědy pro šířku extruze perimetru, šířku extruze výplně apod.). Pokud je " +"hodnota vyjádřena procenty (například: 230%), vypočítá se z výšky vrstvy." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:386 +msgid "mm or % (leave 0 for auto)" +msgstr "mm or % (pro automatické ponechte 0)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:391 +msgid "Keep fan always on" +msgstr "Ventilátor vždy zapnutý" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:392 +msgid "" +"If this is enabled, fan will never be disabled and will be kept running at " +"least at its minimum speed. Useful for PLA, harmful for ABS." +msgstr "" +"Pokud je tato funkce zapnutá, ventilátor nebude nikdy vypnut a bude udržován " +"v chodu alespoň rychlostí která je nastavena jako minimální rychlost. " +"Užitečné pro PLA, škodlivé pro ABS." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:398 +msgid "Enable fan if layer print time is below" +msgstr "Zapnout ventilátor pokud je doba tisku vrstvy kratší než" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:399 +msgid "" +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the minimum and " +"maximum speeds." +msgstr "" +"Pokud je doba tisku vrstvy odhadnuta jako kratší než tato nastavená hodnota " +"ve vteřinách, ventilátor bude aktivován a jeho rychlost bude vypočtena " +"interpolací minimální a maximální rychlosti." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:401 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1244 +msgid "approximate seconds" +msgstr "vteřin přibližně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:409 +msgid "Color" +msgstr "Barva" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:416 +msgid "Filament notes" +msgstr "Poznámky k filamentu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:417 +msgid "You can put your notes regarding the filament here." +msgstr "Zde můžete vložit poznámky týkající se filamentu." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:425 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:819 +msgid "Max volumetric speed" +msgstr "Maximální objemová rychlost" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:426 +msgid "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set to zero for no limit." +msgstr "" +"Maximální povolený objem průtoku pro tento filament. Omezuje maximální " +"rychlost průtoku pro tisk až na minimální rychlost průtoku pro tisk a " +"filament. Zadejte nulu pro nastavení bez omezení." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:429 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:822 +msgid "mm\\u00B3/s" +msgstr "mm\\u00B3/s" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:436 +msgid "" +"Enter your filament diameter here. Good precision is required, so use a " +"caliper and do multiple measurements along the filament, then compute the " +"average." +msgstr "" +"Zde zadejte průměr filamentu. Je zapotřebí správné přesnosti, proto použijte " +"šupleru a proveďte několik měření podél vlákna, poté vypočtete průměr." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:444 +msgid "Density" +msgstr "Hustota" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:445 +#, fuzzy +msgid "" +"Enter your filament density here. This is only for statistical information. " +"A decent way is to weigh a known length of filament and compute the ratio of " +"the length to volume. Better is to calculate the volume directly through " +"displacement." +msgstr "" +"Zde zadejte hustotu filamentu. Toto je pouze pro statistické informace. " +"Přípustný způsob je zvážit známou délku vlákna a vypočítat poměr délky k " +"objemu. Je lepší vypočítat objem přímo přes posun." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:448 +msgid "g/cm^3" +msgstr "g/cm^3" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:454 +msgid "Filament type" +msgstr "Typ filamentu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:455 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1004 +#, fuzzy +msgid "" +"If you want to process the output G-code through custom scripts, just list " +"their absolute paths here. Separate multiple scripts with a semicolon. " +"Scripts will be passed the absolute path to the G-code file as the first " +"argument, and they can access the Slic3r config settings by reading " +"environment variables." +msgstr "" +"Pokud chcete zpracovat výstupní G-kód pomocí vlastních skriptů, stačí zde " +"uvést jejich absolutní cesty. Oddělte více skriptů středníkem. Skripty " +"předají absolutní cestu k souboru G-kódu jako první argument a mohou " +"přistupovat k nastavení konfigurace Slic3ru čtením proměnných prostředí." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:474 +msgid "Soluble material" +msgstr "Rozpustný materiál" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:475 +msgid "Soluble material is most likely used for a soluble support." +msgstr "Rozpustný materiál je převážně používán pro tisk rozpustných podpor." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:480 +msgid "Cost" +msgstr "Náklady" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:481 +msgid "" +"Enter your filament cost per kg here. This is only for statistical " +"information." +msgstr "" +"Zde zadejte cenu filamentu za kg. Slouží pouze pro statistické informace." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:482 +msgid "money/kg" +msgstr "korun/kg" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:491 +msgid "Fill angle" +msgstr "Úhel výplně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:493 +#, fuzzy +msgid "" +"Default base angle for infill orientation. Cross-hatching will be applied to " +"this. Bridges will be infilled using the best direction Slic3r can detect, " +"so this setting does not affect them." +msgstr "" +"Výchozí základní úhel pro orientaci výplně. Na toto bude použito křížové " +"šrafování. Mosty budou vyplněny nejlepším směrem, který Slic3r dokáže " +"rozpoznat, takže toto nastavení je neovlivní." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:505 +msgid "Fill density" +msgstr "Hustota výplně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:507 +#, c-format +msgid "Density of internal infill, expressed in the range 0% - 100%." +msgstr "Hustota vnitřní výplně, vyjádřená v rozmezí 0% až 100%." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:543 +msgid "Fill pattern" +msgstr "Vzor výplně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:545 +msgid "Fill pattern for general low-density infill." +msgstr "Vzor výplně pro obecnou výplň s nízkou hustotou." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:575 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:584 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:593 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:627 +msgid "First layer" +msgstr "První vrstva" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:576 +msgid "" +"This is the acceleration your printer will use for first layer. Set zero to " +"disable acceleration control for first layer." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:585 +msgid "" +"Heated build plate temperature for the first layer. Set this to zero to " +"disable bed temperature control commands in the output." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:595 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 120%) it will be computed over first " +"layer height. If set to zero, it will use the default extrusion width." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:605 +msgid "First layer height" +msgstr "Výška první vrstvy" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:607 +msgid "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 150%) over the default layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:611 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:742 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1392 +msgid "mm or %" +msgstr "mm nebo %" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:617 +msgid "First layer speed" +msgstr "Rychlost první vrstvy" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:618 +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied to all " +"the print moves of the first layer, regardless of their type. If expressed " +"as a percentage (for example: 40%) it will scale the default speeds." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:628 +msgid "" +"Extruder temperature for first layer. If you want to control temperature " +"manually during print, set this to zero to disable temperature control " +"commands in the output file." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:636 +msgid "Gap fill" +msgstr "Výplň mezer" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:638 +msgid "" +"Speed for filling small gaps using short zigzag moves. Keep this reasonably " +"low to avoid too much shaking and resonance issues. Set zero to disable gaps " +"filling." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:646 +#, fuzzy +msgid "Verbose G-code" +msgstr "Verbose G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:647 +msgid "" +"Enable this to get a commented G-code file, with each line explained by a " +"descriptive text. If you print from SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:654 +msgid "G-code flavor" +msgstr "Druh G-kódu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:655 +msgid "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:684 +msgid "" +"This is the acceleration your printer will use for infill. Set zero to " +"disable acceleration control for infill." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:692 +msgid "Combine infill every" +msgstr "Kombinovat výplň každou" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:694 +msgid "" +"This feature allows to combine infill and speed up your print by extruding " +"thicker infill layers while preserving thin perimeters, thus accuracy." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:698 +msgid "Combine infill every n layers" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:703 +msgid "Infill extruder" +msgstr "Extruder pro výplň" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:705 +msgid "The extruder to use when printing infill." +msgstr "Extruder který se použije pro tisk výplní." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:713 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 90%) it will be computed over layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:722 +msgid "Infill before perimeters" +msgstr "Tisknout výplň před tiskem perimetrů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:723 +msgid "" +"This option will switch the print order of perimeters and infill, making the " +"latter first." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:728 +msgid "Only infill where needed" +msgstr "Výplň pouze kde je potřeba" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:730 +msgid "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, slows down " +"the G-code generation due to the multiple checks involved." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:737 +msgid "Infill/perimeters overlap" +msgstr "Přesah pro výplň/perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:739 +msgid "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:750 +msgid "Speed for printing the internal fill. Set to zero for auto." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:759 +msgid "Interface shells" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:760 +msgid "" +"Force the generation of solid shells between adjacent materials/volumes. " +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:768 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1137 +msgid "After layer change G-code" +msgstr "After layer change G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:769 +msgid "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as [layer_num] and " +"[layer_z]." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:779 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:315 +msgid "Layer height" +msgstr "Výška vrstvy" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:781 +msgid "" +"This setting controls the height (and thus the total number) of the slices/" +"layers. Thinner layers give better accuracy but take more time to print." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:789 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:798 +msgid "Max" +msgstr "Maximálně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:790 +msgid "This setting represents the maximum speed of your fan." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:799 +#, c-format +msgid "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:809 +msgid "Max print speed" +msgstr "Maximální rychlost tisku" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:810 +msgid "" +"When setting other speed settings to 0 Slic3r will autocalculate the optimal " +"speed in order to keep constant extruder pressure. This experimental setting " +"is used to set the highest print speed you want to allow." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:820 +msgid "" +"This experimental setting is used to set the maximum volumetric speed your " +"extruder supports." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:828 +msgid "Max volumetric slope positive" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:829 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:840 +msgid "" +"This experimental setting is used to limit the speed of change in extrusion " +"rate. A value of 1.8 mm\\u00B3/s\\u00B2 ensures, that a change from the " +"extrusion rate of 1.8 mm\\u00B3/s (0.45mm extrusion width, 0.2mm extrusion " +"height, feedrate 20 mm/s) to 5.4 mm\\u00B3/s (feedrate 60 mm/s) will take at " +"least 2 seconds." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:833 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:844 +msgid "mm\\u00B3/s\\u00B2" +msgstr "mm\\u00B3/s\\u00B2" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:839 +msgid "Max volumetric slope negative" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:850 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:859 +msgid "Min" +msgstr "Minimálně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:851 +msgid "This setting represents the minimum PWM your fan needs to work." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:860 +msgid "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:868 +msgid "Min print speed" +msgstr "Minimální rychlost tisku" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:869 +msgid "Slic3r will not scale speed down below this speed." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:876 +msgid "Minimum extrusion length" +msgstr "Minimální délka extruze" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:877 +msgid "" +"Generate no less than the number of skirt loops required to consume the " +"specified amount of filament on the bottom layer. For multi-extruder " +"machines, this minimum applies to each extruder." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:886 +msgid "Configuration notes" +msgstr "Configurační poznámky" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:887 +msgid "" +"You can put here your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:896 +msgid "Nozzle diameter" +msgstr "Průměr trysky" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:897 +msgid "" +"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:903 +msgid "API Key" +msgstr "Klíč API" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:904 +msgid "" +"Slic3r can upload G-code files to OctoPrint. This field should contain the " +"API Key required for authentication." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:910 +msgid "Host or IP" +msgstr "Host nebo IP" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:911 +msgid "" +"Slic3r can upload G-code files to OctoPrint. This field should contain the " +"hostname or IP address of the OctoPrint instance." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:917 +msgid "Only retract when crossing perimeters" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:918 +msgid "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will be probably invisible)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:924 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1697 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:805 +msgid "Enable" +msgstr "Zapnout" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:925 +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing. It will enable a tall skirt automatically and move extruders outside " +"such skirt when changing temperatures." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:932 +msgid "Output filename format" +msgstr "Formát výstupního názvu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:933 +msgid "" +"You can use all configuration options as variables inside this template. For " +"example: [layer_height], [fill_density] etc. You can also use [timestamp], " +"[year], [month], [day], [hour], [minute], [second], [version], " +"[input_filename], [input_filename_base]." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:942 +msgid "Detect bridging perimeters" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:944 +msgid "" +"Experimental option to adjust flow for overhangs (bridge flow will be used), " +"to apply bridge speed to them and enable fan." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:950 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:968 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:980 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:990 +msgid "Perimeters" +msgstr "Perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:951 +msgid "" +"This is the acceleration your printer will use for perimeters. A high value " +"like 9000 usually gives good results if your hardware is up to the job. Set " +"zero to disable acceleration control for perimeters." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:959 +msgid "Perimeter extruder" +msgstr "Extruder pro perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:961 +msgid "" +"The extruder to use when printing perimeters and brim. First extruder is 1." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:970 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 200%) " +"it will be computed over layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:982 +msgid "" +"Speed for perimeters (contours, aka vertical shells). Set to zero for auto." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:992 +msgid "" +"This option sets the number of perimeters to generate for each layer. Note " +"that Slic3r may increase this number automatically when it detects sloping " +"surfaces which benefit from a higher number of perimeters if the Extra " +"Perimeters option is enabled." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:996 +msgid "(minimum)" +msgstr "(minimálně)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1003 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:495 +msgid "Post-processing scripts" +msgstr "Post-processing scripts" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1016 +msgid "Printer notes" +msgstr "Poznámky o tiskárně" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1017 +msgid "You can put your notes regarding the printer here." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1031 +msgid "Raft layers" +msgstr "Vrstev raftu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1033 +msgid "" +"The object will be raised by this number of layers, and support material " +"will be generated under it." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1041 +msgid "Resolution" +msgstr "Rozlišení" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1042 +msgid "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more detail than printers can render. Set to zero to disable any " +"simplification and use full resolution from input." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1052 +msgid "Minimum travel after retraction" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1053 +msgid "" +"Retraction is not triggered when travel moves are shorter than this length." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1059 +msgid "Retract amount before wipe" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1060 +msgid "" +"With bowden extruders, it may be wise to do some amount of quick retract " +"before doing the wipe movement." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1067 +msgid "Retract on layer change" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1068 +msgid "This flag enforces a retraction whenever a Z move is done." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1073 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1082 +msgid "Length" +msgstr "Vzdálenost" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1074 +msgid "Retraction Length" +msgstr "Vzdálenost retrakce" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1075 +msgid "" +"When retraction is triggered, filament is pulled back by the specified " +"amount (the length is measured on raw filament, before it enters the " +"extruder)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1077 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1087 +msgid "mm (zero to disable)" +msgstr "mm (nula pro vypnutí)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1083 +msgid "Retraction Length (Toolchange)" +msgstr "Vzdálenost retrakce (při změně nástroje)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1084 +msgid "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1092 +msgid "Lift Z" +msgstr "Zvednout Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1093 +msgid "" +"If you set this to a positive value, Z is quickly raised every time a " +"retraction is triggered. When using multiple extruders, only the setting for " +"the first extruder will be considered." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1101 +msgid "Above Z" +msgstr "Nad Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1102 +msgid "Only lift Z above" +msgstr "Zvednout Z pouze nad" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1103 +msgid "" +"If you set this to a positive value, Z lift will only take place above the " +"specified absolute Z. You can tune this setting for skipping lift on the " +"first layers." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1110 +msgid "Below Z" +msgstr "Pod Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1111 +msgid "Only lift Z below" +msgstr "Zvednout Z pouze pod" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1112 +msgid "" +"If you set this to a positive value, Z lift will only take place below the " +"specified absolute Z. You can tune this setting for limiting lift to the " +"first layers." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1120 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1128 +msgid "Extra length on restart" +msgstr "Extra vzdálenost při restartu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1121 +msgid "" +"When the retraction is compensated after the travel move, the extruder will " +"push this additional amount of filament. This setting is rarely needed." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1129 +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1136 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1137 +msgid "Retraction Speed" +msgstr "Rychlost retrakce" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1138 +msgid "The speed for retractions (it only applies to the extruder motor)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1144 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1145 +msgid "Deretraction Speed" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1146 +msgid "" +"The speed for loading of a filament into extruder after retraction (it only " +"applies to the extruder motor). If left to zero, the retraction speed is " +"used." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1153 +msgid "Seam position" +msgstr "Pozice švu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1155 +msgid "Position of perimeters starting points." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1171 +msgid "Direction" +msgstr "Směr" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1173 +msgid "Preferred direction of the seam" +msgstr "Preferovaný směr švu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1174 +msgid "Seam preferred direction" +msgstr "Preferovaný směr švu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1182 +msgid "Jitter" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1184 +msgid "Seam preferred direction jitter" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1185 +msgid "Preferred direction of the seam - jitter" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1195 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:989 +msgid "Serial port" +msgstr "Sériový port" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1196 +msgid "USB/serial port for printer connection." +msgstr "USB/sériový port pro připojení tiskárny." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1204 +msgid "Serial port speed" +msgstr "Rychlost sériového portu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1205 +msgid "Speed (baud) of USB/serial port for printer connection." +msgstr "Rychlost (baud) USB/sériového portu pro připojení tiskárny." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1214 +msgid "Distance from object" +msgstr "Vzdálenost od objektu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1215 +msgid "" +"Distance between skirt and object(s). Set this to zero to attach the skirt " +"to the object(s) and get a brim for better adhesion." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1223 +msgid "Skirt height" +msgstr "Výška skirtu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1224 +msgid "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1231 +msgid "Loops (minimum)" +msgstr "Smyček (minimálně)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1232 +msgid "Skirt Loops" +msgstr "Smyček skirtu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1233 +msgid "" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"this to zero to disable skirt completely." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1241 +msgid "Slow down if layer print time is below" +msgstr "Zpomalit tisk pokud je doba tisku kratší než" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1242 +msgid "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1252 +msgid "Small perimeters" +msgstr "Malé perimetry" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1254 +msgid "" +"This separate setting will affect the speed of perimeters having radius <= " +"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " +"be calculated on the perimeters speed setting above. Set to zero for auto." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1264 +msgid "Solid infill threshold area" +msgstr "Prahová hodnota plochy pro plnou výplň" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1266 +msgid "" +"Force solid infill for regions having a smaller area than the specified " +"threshold." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1267 +msgid "mm\\u00B2" +msgstr "mm\\u00B2" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1273 +msgid "Solid infill extruder" +msgstr "Extrudér pro plnou výplň" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1275 +msgid "The extruder to use when printing solid infill." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1281 +msgid "Solid infill every" +msgstr "Plná výplň každou" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1283 +msgid "" +"This feature allows to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1293 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1303 +msgid "Solid infill" +msgstr "Plná výplň" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1295 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left zero, default extrusion width will be used if set, " +"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " +"(for example 90%) it will be computed over layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1305 +msgid "" +"Speed for printing solid regions (top/bottom/internal horizontal shells). " +"This can be expressed as a percentage (for example: 80%) over the default " +"infill speed above. Set to zero for auto." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1316 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:331 +msgid "Solid layers" +msgstr "Plných vrstev" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1317 +msgid "Number of solid layers to generate on top and bottom surfaces." +msgstr "Počet plných vstev generovaných vrchních a spodních površích." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1324 +msgid "Spiral vase" +msgstr "Spirálová váza" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1325 +msgid "" +"This feature will raise Z gradually while printing a single-walled object in " +"order to remove any visible seam. This option requires a single perimeter, " +"no infill, no top solid layers and no support material. You can still set " +"any number of bottom solid layers as well as skirt/brim loops. It won't work " +"when printing more than an object." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1334 +msgid "Temperature variation" +msgstr "Temperature variation" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1335 +msgid "" +"Temperature difference to be applied when an extruder is not active. Enables " +"a full-height \"sacrificial\" skirt on which the nozzles are periodically " +"wiped." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1344 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1359 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:846 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1119 +msgid "Start G-code" +msgstr "Začátek G-kódu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1345 +msgid "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder just started heating, and before extruder " +"has finished heating. If Slic3r detects M104 or M190 in your custom codes, " +"such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S[first_layer_temperature]\" command wherever you want." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1360 +msgid "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode. This is used to override settings for a specific filament. If Slic3r " +"detects M104, M109, M140 or M190 in your custom codes, such commands will " +"not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S[first_layer_temperature]\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1375 +msgid "Single Extruder Multi Material" +msgstr "Multi Materiálový tisk s jedním extrudérem" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1376 +msgid "The printer multiplexes filaments into a single hot end." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1381 +msgid "Generate support material" +msgstr "Generovat podpory" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1383 +msgid "Enable support material generation." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1388 +msgid "XY separation between an object and its support" +msgstr "XY vzdálenost mezi objektem a podporami" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1390 +msgid "" +"XY separation between an object and its support. If expressed as percentage " +"(for example 50%), it will be calculated over external perimeter width." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1400 +msgid "Pattern angle" +msgstr "Úhel vzoru" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1402 +msgid "" +"Use this setting to rotate the support material pattern on the horizontal " +"plane." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1410 +msgid "Support on build plate only" +msgstr "Podpory pouze na tiskové ploše" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1412 +msgid "" +"Only create support if it lies on a build plate. Don't create support on a " +"print." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1418 +msgid "Contact Z distance" +msgstr "Kontaktní vzdálenost Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1420 +msgid "" +"The vertical distance between object and support material interface. Setting " +"this to 0 will also prevent Slic3r from using bridge flow and speed for the " +"first object layer." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1433 +#, fuzzy +msgid "Enforce support for the first" +msgstr "Zesílit podpory pro prvních" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1435 +msgid "" +"Generate support material for the specified number of layers counting from " +"bottom, regardless of whether normal support material is enabled or not and " +"regardless of any angle threshold. This is useful for getting more adhesion " +"of objects having a very thin or poor footprint on the build plate." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1441 +msgid "Enforce support for the first n layers" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1446 +msgid "Support material/raft/skirt extruder" +msgstr "Support material/raft/skirt extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1448 +msgid "" +"The extruder to use when printing support material, raft and skirt (1+, 0 to " +"use the current extruder to minimize tool changes)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1457 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 90%) it will be computed over layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1465 +msgid "Interface loops" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1467 +msgid "" +"Cover the top contact layer of the supports with loops. Disabled by default." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1472 +msgid "Support material/raft interface extruder" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1474 +msgid "" +"The extruder to use when printing support material interface (1+, 0 to use " +"the current extruder to minimize tool changes). This affects raft too." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1481 +msgid "Interface layers" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1483 +msgid "" +"Number of interface layers to insert between the object(s) and support " +"material." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1490 +msgid "Interface pattern spacing" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1492 +msgid "Spacing between interface lines. Set zero to get a solid interface." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1499 +msgid "Support material interface" +msgstr "Support material interface" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1501 +msgid "" +"Speed for printing support material interface layers. If expressed as " +"percentage (for example 50%) it will be calculated over support material " +"speed." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1510 +msgid "Pattern" +msgstr "Vzor" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1512 +msgid "Pattern used to generate support material." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1526 +msgid "Pattern spacing" +msgstr "Vzdálenost vzoru" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1528 +msgid "Spacing between support material lines." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1537 +msgid "Speed for printing support material." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1544 +msgid "Synchronize with object layers" +msgstr "Synchronizovat s vrstvami objektu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1546 +msgid "" +"Synchronize support layers with the object print layers. This is useful with " +"multi-material printers, where the extruder switch is expensive." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1552 +msgid "Overhang threshold" +msgstr "Práh přesahu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1554 +msgid "" +"Support material will not be generated for overhangs whose slope angle " +"(90\\u00B0 = vertical) is above the given threshold. In other words, this " +"value represent the most horizontal slope (measured from the horizontal " +"plane) that you can print without support material. Set to zero for " +"automatic detection (recommended)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1566 +msgid "With sheath around the support" +msgstr "S pouzdrem okolo podpor" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1568 +msgid "" +"Add a sheath (a single perimeter line) around the base support. This makes " +"the support more reliable, but also more difficult to remove." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1575 +msgid "" +"Extruder temperature for layers after the first one. Set this to zero to " +"disable temperature control commands in the output." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1578 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:793 +msgid "Temperature" +msgstr "Teplota" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1584 +msgid "Detect thin walls" +msgstr "Detekovat tenké zdi" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1586 +msgid "" +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1592 +msgid "Threads" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1593 +msgid "" +"Threads are used to parallelize long-running tasks. Optimal threads number " +"is slightly above the number of available cores/processors." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1604 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1143 +msgid "Tool change G-code" +msgstr "Tool change G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1605 +msgid "" +"This custom code is inserted right before every extruder change. Note that " +"you can use placeholder variables for all Slic3r settings as well as " +"[previous_extruder] and [next_extruder]." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1615 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1626 +msgid "Top solid infill" +msgstr "Vrchní plná výplň" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1617 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 90%) it will be computed over layer height." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1628 +msgid "" +"Speed for printing top solid layers (it only applies to the uppermost " +"external layers and not to their internal solid layers). You may want to " +"slow down this to get a nicer surface finish. This can be expressed as a " +"percentage (for example: 80%) over the solid infill speed above. Set to zero " +"for auto." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1640 +msgid "Top" +msgstr "Vrchní" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1642 +msgid "Number of solid layers to generate on top surfaces." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1644 +msgid "Top solid layers" +msgstr "Vrchních plných vrstev" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1649 +msgid "Travel" +msgstr "Přesun" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1650 +msgid "Speed for travel moves (jumps between distant extrusion points)." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1658 +msgid "Use firmware retraction" +msgstr "Použít retrakce z firmware" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1659 +msgid "" +"This experimental setting uses G10 and G11 commands to have the firmware " +"handle the retraction. This is only supported in recent Marlin." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1665 +msgid "Use relative E distances" +msgstr "Použít relativní E vzdálenosti" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1666 +msgid "" +"If your firmware requires relative E values, check this, otherwise leave it " +"unchecked. Most firmwares use absolute values." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1672 +msgid "Use volumetric E" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1673 +msgid "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1683 +msgid "Enable variable layer height feature" +msgstr "Zapnout variabilní výšku vrstev" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1684 +msgid "" +"Some printers or printer setups may have difficulties printing with a " +"variable layer height. Enabled by default." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1690 +msgid "Wipe while retracting" +msgstr "Očistit při retrakci" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1691 +msgid "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1698 +msgid "" +"Multi material printers may need to prime or purge extruders on tool " +"changes. Extrude the excess material into the wipe tower." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1704 +msgid "Position X" +msgstr "Pozice X" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1705 +msgid "X coordinate of the left front corner of a wipe tower" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1711 +msgid "Position Y" +msgstr "Pozice Y" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1712 +msgid "Y coordinate of the left front corner of a wipe tower" +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1718 +msgid "Width" +msgstr "Šířka" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1719 +msgid "Width of a wipe tower" +msgstr "Šířka čistící věže" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1725 +msgid "Per color change depth" +msgstr "Hloubka výměny pro barvu" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1726 +msgid "" +"Depth of a wipe color per color change. For N colors, there will be maximum " +"(N-1) tool switches performed, therefore the total depth of the wipe tower " +"will be (N-1) times this value." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1734 +msgid "XY Size Compensation" +msgstr "Kompenzace XY rozměrů" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1736 +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning hole sizes." +msgstr "" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1744 +msgid "Z offset" +msgstr "Odsazení Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1745 +msgid "" +"This value will be added (or subtracted) from all the Z coordinates in the " +"output G-code. It is used to compensate for bad Z endstop position: for " +"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " +"print bed, set this to -0.3 (or fix your endstop)." +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:39 +msgid "Shape" +msgstr "Tvar" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:46 +msgid "Rectangular" +msgstr "Obdélníkový" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:62 +msgid "Circular" +msgstr "Kruhový" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:75 +msgid "Load shape from STL..." +msgstr "Načíst tvar ze souboru STL…" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:120 +msgid "Settings" +msgstr "Nastavení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:298 +msgid "Choose a file to import bed shape from (STL/OBJ/AMF/PRUSA):" +msgstr "Výběr souboru pro import tvaru tiskové podložky (STL/OBJ/AMF/PRUSA):" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:315 +msgid "Error! " +msgstr "Chyba! " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:324 +msgid "The selected file contains no geometry." +msgstr "Vybraný soubor neobsahuje geometrii." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:328 +msgid "" +"The selected file contains several disjoint areas. This is not supported." +msgstr "" +"Vybraný soubor obsahuje několik nespojených ploch. Tato možnost není " +"podporována." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.hpp:42 +msgid "Bed Shape" +msgstr "Tvar tiskové podložky" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:468 +msgid "Error" +msgstr "Chyba" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:473 +msgid "Notice" +msgstr "Oznámení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:50 +msgid "Save current " +msgstr "Uložit stávající " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:51 +msgid "Delete this preset" +msgstr "Smazat přednastavení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:330 +msgid "Horizontal shells" +msgstr "Horizontal shells" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:336 +msgid "Quality (slower slicing)" +msgstr "Kvalita (pomalejší slicing)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:353 +msgid "Reducing printing time" +msgstr "Zkracování tiskového času" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:365 +msgid "Skirt and brim" +msgstr "Skirt and brim" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:381 +msgid "Raft" +msgstr "Raft" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:412 +msgid "Speed for non-print moves" +msgstr "Speed for non-print moves" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:415 +msgid "Modifiers" +msgstr "Modifikátory" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:418 +msgid "Acceleration control (advanced)" +msgstr "Kontrola akcelerací (pokročilé)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:425 +msgid "Autospeed (advanced)" +msgstr "Automatická rychlost (pokročilé)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:431 +msgid "Multiple Extruders" +msgstr "Multiple Extruders" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:439 +msgid "Ooze prevention" +msgstr "Ooze prevention" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:464 +msgid "Overlap" +msgstr "Překrytí" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:467 +msgid "Flow" +msgstr "Průtok" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:470 +msgid "Other" +msgstr "Ostatní" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:477 +msgid "Output options" +msgstr "Možnosti výstupu" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:478 +msgid "Sequential printing" +msgstr "Sekvenční tisk" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:501 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:502 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:858 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:859 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1155 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1156 +msgid "Notes" +msgstr "Poznámky" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:508 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:866 +msgid "Dependencies" +msgstr "Závislosti" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:509 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:867 +msgid "Profile dependencies" +msgstr "Profilové závislosti" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:799 +msgid "Bed" +msgstr "Tisková podložka" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:804 +msgid "Cooling" +msgstr "Chlazení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:816 +msgid "Fan settings" +msgstr "Nastavení ventilátoru" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:835 +msgid "Print speed override" +msgstr "Přepsání rychlosti tisku" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:845 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1118 +msgid "Custom G-code" +msgstr "Upravený G-kód" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:936 +msgid "General" +msgstr "Obecné" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:937 +msgid "Size and coordinates" +msgstr "Rozměr a souřadnice" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:941 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1642 +msgid "Set" +msgstr "Nastavit" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:961 +msgid "Capabilities" +msgstr "Možnosti" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1003 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1071 +msgid "Test" +msgstr "Test" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1016 +msgid "Connection to printer works correctly." +msgstr "Připojení k tiskárně pracuje správně." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1016 +msgid "Success!" +msgstr "Úspěch!" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1019 +msgid "Connection failed." +msgstr "Připojení selhalo." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1031 +msgid "OctoPrint upload" +msgstr "OctoPrint nahrávání" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1034 +msgid "Browse" +msgstr "Procházet" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1046 +msgid "Button BROWSE was clicked!" +msgstr "Tlačítko PROCHÁZET bylo stisknuto!" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1081 +msgid "Button TEST was clicked!" +msgstr "Tlačítko TEST bylo stisknuto!" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1109 +msgid "Firmware" +msgstr "Firmware" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1191 +msgid "Layer height limits" +msgstr "Výskové limity vrstvy" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1196 +msgid "Position (for multi-extruder printers)" +msgstr "Position (for multi-extruder printers)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1215 +msgid "" +"Retraction when tool is disabled (advanced settings for multi-extruder " +"setups)" +msgstr "" +"Retraction when tool is disabled (advanced settings for multi-extruder " +"setups)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1219 +msgid "Preview" +msgstr "Náhled" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1310 +msgid "" +"The Wipe option is not available when using the Firmware Retraction mode.\n" +"\n" +"Shall I disable it in order to enable Firmware Retraction?" +msgstr "" +"The Wipe option is not available when using the Firmware Retraction mode.\n" +"\n" +"Shall I disable it in order to enable Firmware Retraction?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1558 +msgid "The supplied name is empty. It can't be saved." +msgstr "The supplied name is empty. It can't be saved." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1569 +msgid "Something is wrong. It can't be saved." +msgstr "Něco se pokazilo. Nemůže být uloženo." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1586 +msgid "remove" +msgstr "odebrat" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1586 +msgid "delete" +msgstr "smazat" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1587 +msgid "Are you sure you want to " +msgstr "Jste si jistý že chcete " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1587 +msgid " the selected preset?" +msgstr " zvolené přednastavení?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1588 +msgid "Remove" +msgstr "Odebrat" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1588 +msgid "Delete" +msgstr "Smazat" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1589 +msgid " Preset" +msgstr " Přednastavení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1641 +msgid "All" +msgstr "Vše" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1672 +msgid "Select the printers this profile is compatible with." +msgstr "Select the printers this profile is compatible with." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1756 +msgid "Save " +msgstr "Uložit " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1756 +msgid " as:" +msgstr " jako:" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1790 +msgid "" +"The supplied name is not valid; the following characters are not allowed:" +msgstr "" +"The supplied name is not valid; the following characters are not allowed:" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1793 +msgid "The supplied name is not available." +msgstr "The supplied name is not available." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:182 +msgid "Print Settings" +msgstr "Nastavení tisku" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:202 +msgid "Filament Settings" +msgstr "Nastavení Filamentu" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:248 +msgid "Save preset" +msgstr "Uložit přednastavení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Field.cpp:35 +msgid "default" +msgstr "výchozí" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:71 +msgid "Custom" +msgstr "Upravený" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:212 +msgid "Array of language names and identifiers should have the same size." +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:223 +msgid "Select the language" +msgstr "Výběr jazyka" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:223 +msgid "Language" +msgstr "Jazyk" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:321 +msgid "Change Application Language" +msgstr "Změnit Jazyk Aplikace" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:314 +msgid "Layers and perimeters" +msgstr "Vrstvy a perimetry" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:319 +msgid "Vertical shells" +msgstr "Vertical shells" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:366 +msgid "Skirt" +msgstr "Skirt" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:372 +msgid "Brim" +msgstr "Brim" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:385 +msgid "Options for support material and raft" +msgstr "Options for support material and raft" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:400 +msgid "Speed for print moves" +msgstr "Speed for print moves" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:443 +msgid "Wipe tower" +msgstr "Čistící věž" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:454 +msgid "Extrusion width" +msgstr "Šířka extruze" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:480 +msgid "Extruder clearance (mm)" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:489 +msgid "Output file" +msgstr "Výstupní soubor" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:534 +#, c-format +msgid "" +"The Spiral Vase mode requires:\n" +"- one perimeter\n" +"- no top solid layers\n" +"- 0% fill density\n" +"- no support material\n" +"- no ensure_vertical_shell_thickness\n" +"\n" +"Shall I adjust those settings in order to enable Spiral Vase?" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:541 +msgid "Spiral Vase" +msgstr "Spirálová váza" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:560 +msgid "" +"The Wipe Tower currently supports only:\n" +"- first layer height 0.2mm\n" +"- layer height from 0.15mm to 0.35mm\n" +"\n" +"Shall I adjust those settings in order to enable the Wipe Tower?" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:564 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:585 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:602 +msgid "Wipe Tower" +msgstr "Čistící věž" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:581 +msgid "" +"The Wipe Tower currently supports the non-soluble supports only\n" +"if they are printed with the current extruder without triggering a tool " +"change.\n" +"(both support_material_extruder and support_material_interface_extruder need " +"to be set to 0).\n" +"\n" +"Shall I adjust those settings in order to enable the Wipe Tower?" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:599 +msgid "" +"For the Wipe Tower to work with the soluble supports, the support layers\n" +"need to be synchronized with the object layers.\n" +"\n" +"Shall I synchronize support layers in order to enable the Wipe Tower?" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:617 +msgid "" +"Supports work better, if the following feature is enabled:\n" +"- Detect bridging perimeters\n" +"\n" +"Shall I adjust those settings for supports?" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:620 +msgid "Support Generator" +msgstr "Generátor Podpor" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662 +msgid "The " +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662 +#, c-format +msgid "" +" infill pattern is not supposed to work at 100% density.\n" +"\n" +"Shall I switch to rectilinear fill pattern?" +msgstr "" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:785 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:786 +msgid "Filament" +msgstr "Filament" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:817 +msgid "Fan speed" +msgstr "Rychlost ventilátoru" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:825 +msgid "Cooling thresholds" +msgstr "Práh chlazení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:831 +msgid "Filament properties" +msgstr "Vlastnosti filamentu" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:988 +msgid "USB/Serial connection" +msgstr "USB/Sériové připojení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:994 +msgid "Rescan serial ports" +msgstr "Znovu prohledat sériové porty" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1149 +msgid "Between objects G-code (for sequential printing)" +msgstr "Between objects G-code (for sequential printing)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1185 +msgid "Extruder " +msgstr "Extrudér " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1199 +msgid "Retraction" +msgstr "Retrakce" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1202 +msgid "Only lift Z" +msgstr "Pouze zvednout Z" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1312 +msgid "Firmware Retraction" +msgstr "Firmware Retrakce" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1467 +msgid "Default " +msgstr "Výchozí " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1467 +msgid " preset" +msgstr " přednastavení" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1468 +msgid " preset\n" +msgstr " přednastavení\n" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1486 +msgid "" +"\n" +"\n" +"is not compatible with printer\n" +msgstr "" +"\n" +"\n" +"není kompatibilní s tiskárnou\n" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1486 +msgid "" +"\n" +"\n" +"and it has the following unsaved changes:" +msgstr "" +"\n" +"\n" +"a má neuložené následující změny:" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1487 +msgid "" +"\n" +"\n" +"has the following unsaved changes:" +msgstr "" +"\n" +"\n" +"má neuložené následující změny:" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1489 +msgid "" +"\n" +"\n" +"Discard changes and continue anyway?" +msgstr "" +"\n" +"\n" +"Zahodit změny a přesto pokračovat?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1490 +msgid "Unsaved Changes" +msgstr "Neuložené Změny" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:228 +msgid "Printer Settings" +msgstr "Nastavení tiskárny" diff --git a/resources/localization/en_US/Slic3rPE.mo b/resources/localization/en_US/Slic3rPE.mo index 2b037fbb5..3db8f8203 100644 Binary files a/resources/localization/en_US/Slic3rPE.mo and b/resources/localization/en_US/Slic3rPE.mo differ diff --git a/resources/localization/en_US/Slic3rPE_en.po b/resources/localization/en_US/Slic3rPE_en.po index 3ce3195f5..d9ea2a69d 100644 --- a/resources/localization/en_US/Slic3rPE_en.po +++ b/resources/localization/en_US/Slic3rPE_en.po @@ -6,8 +6,8 @@ msgid "" msgstr "" "Project-Id-Version: SLIC3R PE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2018-02-07 20:20+0100\n" -"PO-Revision-Date: 2018-02-08 01:42+0100\n" +"POT-Creation-Date: 2018-02-13 17:18+0100\n" +"PO-Revision-Date: 2018-02-14 16:16+0100\n" "Last-Translator: Oleksandra Iushchenko \n" "Language-Team: \n" "MIME-Version: 1.0\n" @@ -18,426 +18,2633 @@ msgstr "" "Language: en_US\n" "X-Poedit-KeywordsList: _L\n" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:81 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:50 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1188 +msgid "Size" +msgstr "Size" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:51 +msgid "Size in X and Y of the rectangular plate." +msgstr "Size in X and Y of the rectangular plate." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:57 +msgid "Origin" +msgstr "Origin" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:58 +msgid "" +"Distance of the 0,0 G-code coordinate from the front left corner of the " +"rectangle." +msgstr "" +"Distance of the 0,0 G-code coordinate from the front left corner of the " +"rectangle." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:65 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:133 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:204 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:215 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:329 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:340 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:359 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:438 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:783 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:803 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:862 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:880 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:898 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1046 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1054 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1096 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1105 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1115 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1123 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1131 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1217 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1423 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1493 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1529 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1706 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1713 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1720 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1729 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1739 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1749 +msgid "mm" +msgstr "mm" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:66 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:435 +msgid "Diameter" +msgstr "Diameter" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:67 +msgid "" +"Diameter of the print bed. It is assumed that origin (0,0) is located in the " +"center." +msgstr "" +"Diameter of the print bed. It is assumed that origin (0,0) is located in the " +"center." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:965 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:312 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:704 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:960 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1274 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1447 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1473 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:432 +msgid "Extruders" +msgstr "Extruders" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:966 +msgid "Number of extruders of the printer." +msgstr "Number of extruders of the printer." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:30 +msgid "Avoid crossing perimeters" +msgstr "Avoid crossing perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:31 +msgid "" +"Optimize travel moves in order to minimize the crossing of perimeters. This " +"is mostly useful with Bowden extruders which suffer from oozing. This " +"feature slows down both the print and the G-code generation." +msgstr "" +"Optimize travel moves in order to minimize the crossing of perimeters. This " +"is mostly useful with Bowden extruders which suffer from oozing. This " +"feature slows down both the print and the G-code generation." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:38 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:939 +msgid "Bed shape" +msgstr "Bed shape" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:42 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1574 +msgid "Other layers" +msgstr "Other layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:43 +msgid "" +"Bed temperature for layers after the first one. Set this to zero to disable " +"bed temperature control commands in the output." +msgstr "" +"Bed temperature for layers after the first one. Set this to zero to disable " +"bed temperature control commands in the output." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:46 +msgid "Bed temperature" +msgstr "Bed temperature" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:52 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1131 +msgid "Before layer change G-code" +msgstr "Before layer change G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:53 +msgid "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as [layer_num] and [layer_z]." +msgstr "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as [layer_num] and [layer_z]." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:63 +msgid "Between objects G-code" +msgstr "Between objects G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:64 +msgid "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S[first_layer_temperature]\" command wherever you want." +msgstr "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S[first_layer_temperature]\" command wherever you want." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:72 +msgid "Bottom" +msgstr "Bottom" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:73 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:243 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:294 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:302 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:606 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:764 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:780 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:943 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:991 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1154 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1585 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1641 +msgid "Layers and Perimeters" +msgstr "Layers and perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:74 +msgid "Number of solid layers to generate on bottom surfaces." +msgstr "Number of solid layers to generate on bottom surfaces." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:76 +msgid "Bottom solid layers" +msgstr "Bottom solid layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:81 +msgid "Bridge" +msgstr "Bridge" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:82 +msgid "" +"This is the acceleration your printer will use for bridges. Set zero to " +"disable acceleration control for bridges." +msgstr "" +"This is the acceleration your printer will use for bridges. Set zero to " +"disable acceleration control for bridges." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:84 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:178 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:578 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:686 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:954 +msgid "mm/s\\u00B2" +msgstr "mm/s\\u00B2" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:90 +msgid "Bridging angle" +msgstr "Bridging angle" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:91 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:251 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:492 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:506 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:544 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:683 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:693 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:711 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:729 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:748 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1265 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1282 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:347 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:348 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:664 +msgid "Infill" +msgstr "Infill" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:92 +msgid "" +"Bridging angle override. If left to zero, the bridging angle will be " +"calculated automatically. Otherwise the provided angle will be used for all " +"bridges. Use 180\\u00B0 for zero angle." +msgstr "" +"Bridging angle override. If left to zero, the bridging angle will be " +"calculated automatically. Otherwise the provided angle will be used for all " +"bridges. Use 180\\u00B0 for zero angle." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:95 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:496 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1172 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1183 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1403 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1559 +msgid "\\u00B0" +msgstr "\\u00B0" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:101 +msgid "Bridges fan speed" +msgstr "Bridges fan speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:102 +msgid "This fan speed is enforced during all bridges and overhangs." +msgstr "This fan speed is enforced during all bridges and overhangs." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:103 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:508 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:791 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:852 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1062 +msgid "%" +msgstr "%" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:110 +msgid "Bridge flow ratio" +msgstr "Bridge flow ratio" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:111 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:212 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:738 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1735 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:343 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:357 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:450 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:453 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:830 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1112 +msgid "Advanced" +msgstr "Advanced" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:112 +msgid "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this." +msgstr "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:121 +msgid "Bridges" +msgstr "Bridges" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:122 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:282 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:637 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:749 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:981 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1203 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1253 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1304 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1627 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:399 +msgid "Speed" +msgstr "Speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:123 +msgid "Speed for printing bridges." +msgstr "Speed for printing bridges." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:124 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:640 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:751 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:813 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:870 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:983 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1139 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1148 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1538 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1651 +msgid "mm/s" +msgstr "mm/s" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:131 +msgid "Brim width" +msgstr "Brim width" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:132 +msgid "" +"Horizontal width of the brim that will be printed around each object on the " +"first layer." +msgstr "" +"Horizontal width of the brim that will be printed around each object on the " +"first layer." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:139 +msgid "Clip multi-part objects" +msgstr "Clip multi-part objects" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:140 +msgid "" +"When printing multi-material objects, this settings will make slic3r to clip " +"the overlapping object parts one by the other (2nd part will be clipped by " +"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." +msgstr "" +"When printing multi-material objects, this settings will make slic3r to clip " +"the overlapping object parts one by the other (2nd part will be clipped by " +"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:147 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:510 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:868 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1673 +msgid "Compatible printers" +msgstr "Compatible printers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:151 +msgid "Compatible printers condition" +msgstr "Compatible printers condition" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:152 +msgid "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." +msgstr "" +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:158 +msgid "Complete individual objects" +msgstr "Complete individual objects" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:159 +msgid "" +"When printing multiple objects or copies, this feature will complete each " +"object before moving onto next one (and starting it from its bottom layer). " +"This feature is useful to avoid the risk of ruined prints. Slic3r should " +"warn and prevent you from extruder collisions, but beware." +msgstr "" +"When printing multiple objects or copies, this feature will complete each " +"object before moving onto next one (and starting it from its bottom layer). " +"This feature is useful to avoid the risk of ruined prints. Slic3r should " +"warn and prevent you from extruder collisions, but beware." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:167 +msgid "Enable auto cooling" +msgstr "Enable auto cooling" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:168 +msgid "" +"This flag enables the automatic cooling logic that adjusts print speed and " +"fan speed according to layer printing time." +msgstr "" +"This flag enables the automatic cooling logic that adjusts print speed and " +"fan speed according to layer printing time." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:174 +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:293 msgid "Default" msgstr "Default" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:109 -msgid "Shape" -msgstr "Shape" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:175 +msgid "" +"This is the acceleration your printer will be reset to after the role-" +"specific acceleration values are used (perimeter/infill). Set zero to " +"prevent resetting acceleration at all." +msgstr "" +"This is the acceleration your printer will be reset to after the role-" +"specific acceleration values are used (perimeter/infill). Set zero to " +"prevent resetting acceleration at all." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:184 +msgid "Disable fan for the first" +msgstr "Disable fan for the first" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:185 +msgid "" +"You can set this to a positive value to disable fan at all during the first " +"layers, so that it does not make adhesion worse." +msgstr "" +"You can set this to a positive value to disable fan at all during the first " +"layers, so that it does not make adhesion worse." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:187 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:696 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1035 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1226 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1287 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1439 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1484 +msgid "layers" +msgstr "layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:194 +msgid "Don't support bridges" +msgstr "Don't support bridges" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:195 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1032 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1382 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1389 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1401 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1411 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1419 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1434 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1455 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1466 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1482 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1491 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1500 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1511 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1527 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1535 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1536 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1545 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1553 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1567 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:375 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:376 +msgid "Support material" +msgstr "Support material" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:196 +msgid "" +"Experimental option for preventing support material from being generated " +"under bridged areas." +msgstr "" +"Experimental option for preventing support material from being generated " +"under bridged areas." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:202 +msgid "Distance between copies" +msgstr "Distance between copies" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:203 +msgid "Distance used for the auto-arrange feature of the plater." +msgstr "Distance used for the auto-arrange feature of the plater." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:211 +msgid "Elefant foot compensation" +msgstr "Elefant foot compensation" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:213 +msgid "" +"The first layer will be shrunk in the XY plane by the configured value to " +"compensate for the 1st layer squish aka an Elefant Foot effect." +msgstr "" +"The first layer will be shrunk in the XY plane by the configured value to " +"compensate for the 1st layer squish aka an Elefant Foot effect." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:221 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:231 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:852 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1125 +msgid "End G-code" +msgstr "End G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:222 +msgid "" +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." +msgstr "" +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:232 +msgid "" +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode. Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." +msgstr "" +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode. Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:242 +msgid "Ensure vertical shell thickness" +msgstr "Ensure vertical shell thickness" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:244 +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers)." +msgstr "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:250 +msgid "Top/bottom fill pattern" +msgstr "Top/bottom fill pattern" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:252 +msgid "" +"Fill pattern for top/bottom infill. This only affects the external visible " +"layer, and not its adjacent solid shells." +msgstr "" +"Fill pattern for top/bottom infill. This only affects the external visible " +"layer, and not its adjacent solid shells." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:271 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:281 +msgid "External perimeters" +msgstr "External perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:272 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:381 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:594 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:712 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:969 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1294 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1456 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1616 +msgid "Extrusion Width" +msgstr "Extrusion width" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:273 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " +"(for example 200%), it will be computed over layer height." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " +"(for example 200%), it will be computed over layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:276 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:599 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:717 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:974 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1298 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1460 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1621 +msgid "mm or % (leave 0 for default)" +msgstr "mm or % (leave 0 for default)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:283 +msgid "" +"This separate setting will affect the speed of external perimeters (the " +"visible ones). If expressed as percentage (for example: 80%) it will be " +"calculated on the perimeters speed setting above. Set to zero for auto." +msgstr "" +"This separate setting will affect the speed of external perimeters (the " +"visible ones). If expressed as percentage (for example: 80%) it will be " +"calculated on the perimeters speed setting above. Set to zero for auto." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:286 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:621 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1257 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1308 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1503 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1633 +msgid "mm/s or %" +msgstr "mm/s or %" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:293 +msgid "External perimeters first" +msgstr "External perimeters first" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:295 +msgid "" +"Print contour perimeters from the outermost one to the innermost one instead " +"of the default inverse order." +msgstr "" +"Print contour perimeters from the outermost one to the innermost one instead " +"of the default inverse order." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:301 +msgid "Extra perimeters if needed" +msgstr "Extra perimeters if needed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:303 +#, c-format +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported." +msgstr "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:311 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:794 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1231 +msgid "Extruder" +msgstr "Extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:313 +msgid "" +"The extruder to use (unless more specific extruder settings are specified). " +"This value overrides perimeter and infill extruders, but not the support " +"extruders." +msgstr "" +"The extruder to use (unless more specific extruder settings are specified). " +"This value overrides perimeter and infill extruders, but not the support " +"extruders." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:324 +msgid "Height" +msgstr "Height" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:325 +msgid "" +"Set this to the vertical distance between your nozzle tip and (usually) the " +"X carriage rods. In other words, this is the height of the clearance " +"cylinder around your extruder, and it represents the maximum depth the " +"extruder can peek before colliding with other printed objects." +msgstr "" +"Set this to the vertical distance between your nozzle tip and (usually) the " +"X carriage rods. In other words, this is the height of the clearance " +"cylinder around your extruder, and it represents the maximum depth the " +"extruder can peek before colliding with other printed objects." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:335 +msgid "Radius" +msgstr "Radius" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:336 +msgid "" +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the plater." +msgstr "" +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the plater." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:346 +msgid "Extruder Color" +msgstr "Extruder Color" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:347 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:410 +msgid "This is only used in the Slic3r interface as a visual help." +msgstr "This is only used in the Slic3r interface as a visual help." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:354 +msgid "Extruder offset" +msgstr "Extruders offset" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:355 +msgid "" +"If your firmware doesn't handle the extruder displacement you need the G-" +"code to take it into account. This option lets you specify the displacement " +"of each extruder with respect to the first one. It expects positive " +"coordinates (they will be subtracted from the XY coordinate)." +msgstr "" +"If your firmware doesn't handle the extruder displacement you need the G-" +"code to take it into account. This option lets you specify the displacement " +"of each extruder with respect to the first one. It expects positive " +"coordinates (they will be subtracted from the XY coordinate)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:364 +msgid "Extrusion axis" +msgstr "Extrusion axis" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:365 +msgid "" +"Use this option to set the axis letter associated to your printer's extruder " +"(usually E but some printers use A)." +msgstr "" +"Use this option to set the axis letter associated to your printer's extruder " +"(usually E but some printers use A)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:371 +msgid "Extrusion multiplier" +msgstr "Extrusion multiplier" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:372 +msgid "" +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 0.9 and 1.1. If you think you need to change this " +"more, check filament diameter and your firmware E steps." +msgstr "" +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 0.9 and 1.1. If you think you need to change this " +"more, check filament diameter and your firmware E steps." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:380 +msgid "Default extrusion width" +msgstr "Default extrusion width" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:382 +msgid "" +"Set this to a non-zero value to allow a manual extrusion width. If left to " +"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " +"tooltips for perimeter extrusion width, infill extrusion width etc). If " +"expressed as percentage (for example: 230%), it will be computed over layer " +"height." +msgstr "" +"Set this to a non-zero value to allow a manual extrusion width. If left to " +"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " +"tooltips for perimeter extrusion width, infill extrusion width etc). If " +"expressed as percentage (for example: 230%), it will be computed over layer " +"height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:386 +msgid "mm or % (leave 0 for auto)" +msgstr "mm or % (leave 0 for auto)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:391 +msgid "Keep fan always on" +msgstr "Keep fan always on" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:392 +msgid "" +"If this is enabled, fan will never be disabled and will be kept running at " +"least at its minimum speed. Useful for PLA, harmful for ABS." +msgstr "" +"If this is enabled, fan will never be disabled and will be kept running at " +"least at its minimum speed. Useful for PLA, harmful for ABS." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:398 +msgid "Enable fan if layer print time is below" +msgstr "Enable fan if layer print time is below" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:399 +msgid "" +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the minimum and " +"maximum speeds." +msgstr "" +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the minimum and " +"maximum speeds." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:401 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1244 +msgid "approximate seconds" +msgstr "approximate seconds" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:409 +msgid "Color" +msgstr "Color" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:416 +msgid "Filament notes" +msgstr "Filament notes" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:417 +msgid "You can put your notes regarding the filament here." +msgstr "You can put your notes regarding the filament here." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:425 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:819 +msgid "Max volumetric speed" +msgstr "Max volumetric speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:426 +msgid "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set to zero for no limit." +msgstr "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set to zero for no limit." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:429 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:822 +msgid "mm\\u00B3/s" +msgstr "mm\\u00B3/s" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:436 +msgid "" +"Enter your filament diameter here. Good precision is required, so use a " +"caliper and do multiple measurements along the filament, then compute the " +"average." +msgstr "" +"Enter your filament diameter here. Good precision is required, so use a " +"caliper and do multiple measurements along the filament, then compute the " +"average." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:444 +msgid "Density" +msgstr "Density" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:445 +msgid "" +"Enter your filament density here. This is only for statistical information. " +"A decent way is to weigh a known length of filament and compute the ratio of " +"the length to volume. Better is to calculate the volume directly through " +"displacement." +msgstr "" +"Enter your filament density here. This is only for statistical information. " +"A decent way is to weigh a known length of filament and compute the ratio of " +"the length to volume. Better is to calculate the volume directly through " +"displacement." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:448 +msgid "g/cm^3" +msgstr "g/cm^3" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:454 +msgid "Filament type" +msgstr "Filament type" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:455 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1004 +msgid "" +"If you want to process the output G-code through custom scripts, just list " +"their absolute paths here. Separate multiple scripts with a semicolon. " +"Scripts will be passed the absolute path to the G-code file as the first " +"argument, and they can access the Slic3r config settings by reading " +"environment variables." +msgstr "" +"If you want to process the output G-code through custom scripts, just list " +"their absolute paths here. Separate multiple scripts with a semicolon. " +"Scripts will be passed the absolute path to the G-code file as the first " +"argument, and they can access the Slic3r config settings by reading " +"environment variables." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:474 +msgid "Soluble material" +msgstr "Soluble material" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:475 +msgid "Soluble material is most likely used for a soluble support." +msgstr "Soluble material is most likely used for a soluble support." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:480 +msgid "Cost" +msgstr "Cost" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:481 +msgid "" +"Enter your filament cost per kg here. This is only for statistical " +"information." +msgstr "" +"Enter your filament cost per kg here. This is only for statistical " +"information." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:482 +msgid "money/kg" +msgstr "money/kg" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:491 +msgid "Fill angle" +msgstr "Fill angle" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:493 +msgid "" +"Default base angle for infill orientation. Cross-hatching will be applied to " +"this. Bridges will be infilled using the best direction Slic3r can detect, " +"so this setting does not affect them." +msgstr "" +"Default base angle for infill orientation. Cross-hatching will be applied to " +"this. Bridges will be infilled using the best direction Slic3r can detect, " +"so this setting does not affect them." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:505 +msgid "Fill density" +msgstr "Fill density" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:507 +#, c-format +msgid "Density of internal infill, expressed in the range 0% - 100%." +msgstr "Density of internal infill, expressed in the range 0% - 100%." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:543 +msgid "Fill pattern" +msgstr "Fill pattern" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:545 +msgid "Fill pattern for general low-density infill." +msgstr "Fill pattern for general low-density infill." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:575 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:584 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:593 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:627 +msgid "First layer" +msgstr "First layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:576 +msgid "" +"This is the acceleration your printer will use for first layer. Set zero to " +"disable acceleration control for first layer." +msgstr "" +"This is the acceleration your printer will use for first layer. Set zero to " +"disable acceleration control for first layer." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:585 +msgid "" +"Heated build plate temperature for the first layer. Set this to zero to " +"disable bed temperature control commands in the output." +msgstr "" +"Heated build plate temperature for the first layer. Set this to zero to " +"disable bed temperature control commands in the output." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:595 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 120%) it will be computed over first " +"layer height. If set to zero, it will use the default extrusion width." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 120%) it will be computed over first " +"layer height. If set to zero, it will use the default extrusion width." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:605 +msgid "First layer height" +msgstr "First layer height" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:607 +msgid "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 150%) over the default layer height." +msgstr "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 150%) over the default layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:611 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:742 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1392 +msgid "mm or %" +msgstr "mm or %" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:617 +msgid "First layer speed" +msgstr "First layer speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:618 +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied to all " +"the print moves of the first layer, regardless of their type. If expressed " +"as a percentage (for example: 40%) it will scale the default speeds." +msgstr "" +"If expressed as absolute value in mm/s, this speed will be applied to all " +"the print moves of the first layer, regardless of their type. If expressed " +"as a percentage (for example: 40%) it will scale the default speeds." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:628 +msgid "" +"Extruder temperature for first layer. If you want to control temperature " +"manually during print, set this to zero to disable temperature control " +"commands in the output file." +msgstr "" +"Extruder temperature for first layer. If you want to control temperature " +"manually during print, set this to zero to disable temperature control " +"commands in the output file." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:636 +msgid "Gap fill" +msgstr "Gap fill" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:638 +msgid "" +"Speed for filling small gaps using short zigzag moves. Keep this reasonably " +"low to avoid too much shaking and resonance issues. Set zero to disable gaps " +"filling." +msgstr "" +"Speed for filling small gaps using short zigzag moves. Keep this reasonably " +"low to avoid too much shaking and resonance issues. Set zero to disable gaps " +"filling." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:646 +msgid "Verbose G-code" +msgstr "Verbose G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:647 +msgid "" +"Enable this to get a commented G-code file, with each line explained by a " +"descriptive text. If you print from SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" +"Enable this to get a commented G-code file, with each line explained by a " +"descriptive text. If you print from SD card, the additional weight of the " +"file could make your firmware slow down." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:654 +msgid "G-code flavor" +msgstr "G-code flavor" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:655 +msgid "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." +msgstr "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:684 +msgid "" +"This is the acceleration your printer will use for infill. Set zero to " +"disable acceleration control for infill." +msgstr "" +"This is the acceleration your printer will use for infill. Set zero to " +"disable acceleration control for infill." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:692 +msgid "Combine infill every" +msgstr "Combine infill every" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:694 +msgid "" +"This feature allows to combine infill and speed up your print by extruding " +"thicker infill layers while preserving thin perimeters, thus accuracy." +msgstr "" +"This feature allows to combine infill and speed up your print by extruding " +"thicker infill layers while preserving thin perimeters, thus accuracy." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:698 +msgid "Combine infill every n layers" +msgstr "Combine infill every n layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:703 +msgid "Infill extruder" +msgstr "Infill extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:705 +msgid "The extruder to use when printing infill." +msgstr "The extruder to use when printing infill." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:713 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 90%) it will be computed over layer height." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 90%) it will be computed over layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:722 +msgid "Infill before perimeters" +msgstr "Infill before perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:723 +msgid "" +"This option will switch the print order of perimeters and infill, making the " +"latter first." +msgstr "" +"This option will switch the print order of perimeters and infill, making the " +"latter first." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:728 +msgid "Only infill where needed" +msgstr "Only infill where needed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:730 +msgid "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, slows down " +"the G-code generation due to the multiple checks involved." +msgstr "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, slows down " +"the G-code generation due to the multiple checks involved." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:737 +msgid "Infill/perimeters overlap" +msgstr "Infill/perimeters overlap" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:739 +msgid "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width." +msgstr "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:750 +msgid "Speed for printing the internal fill. Set to zero for auto." +msgstr "Speed for printing the internal fill. Set to zero for auto." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:759 +msgid "Interface shells" +msgstr "Interface shells" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:760 +msgid "" +"Force the generation of solid shells between adjacent materials/volumes. " +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material." +msgstr "" +"Force the generation of solid shells between adjacent materials/volumes. " +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:768 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1137 +msgid "After layer change G-code" +msgstr "After layer change G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:769 +msgid "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as [layer_num] and " +"[layer_z]." +msgstr "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as [layer_num] and " +"[layer_z]." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:779 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:315 +msgid "Layer height" +msgstr "Layer height" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:781 +msgid "" +"This setting controls the height (and thus the total number) of the slices/" +"layers. Thinner layers give better accuracy but take more time to print." +msgstr "" +"This setting controls the height (and thus the total number) of the slices/" +"layers. Thinner layers give better accuracy but take more time to print." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:789 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:798 +msgid "Max" +msgstr "Max" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:790 +msgid "This setting represents the maximum speed of your fan." +msgstr "This setting represents the maximum speed of your fan." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:799 +#, c-format +msgid "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." +msgstr "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:809 +msgid "Max print speed" +msgstr "Max print speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:810 +msgid "" +"When setting other speed settings to 0 Slic3r will autocalculate the optimal " +"speed in order to keep constant extruder pressure. This experimental setting " +"is used to set the highest print speed you want to allow." +msgstr "" +"When setting other speed settings to 0 Slic3r will autocalculate the optimal " +"speed in order to keep constant extruder pressure. This experimental setting " +"is used to set the highest print speed you want to allow." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:820 +msgid "" +"This experimental setting is used to set the maximum volumetric speed your " +"extruder supports." +msgstr "" +"This experimental setting is used to set the maximum volumetric speed your " +"extruder supports." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:828 +msgid "Max volumetric slope positive" +msgstr "Max volumetric slope positive" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:829 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:840 +msgid "" +"This experimental setting is used to limit the speed of change in extrusion " +"rate. A value of 1.8 mm\\u00B3/s\\u00B2 ensures, that a change from the " +"extrusion rate of 1.8 mm\\u00B3/s (0.45mm extrusion width, 0.2mm extrusion " +"height, feedrate 20 mm/s) to 5.4 mm\\u00B3/s (feedrate 60 mm/s) will take at " +"least 2 seconds." +msgstr "" +"This experimental setting is used to limit the speed of change in extrusion " +"rate. A value of 1.8 mm\\u00B3/s\\u00B2 ensures, that a change from the " +"extrusion rate of 1.8 mm\\u00B3/s (0.45mm extrusion width, 0.2mm extrusion " +"height, feedrate 20 mm/s) to 5.4 mm\\u00B3/s (feedrate 60 mm/s) will take at " +"least 2 seconds." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:833 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:844 +msgid "mm\\u00B3/s\\u00B2" +msgstr "mm\\u00B3/s\\u00B2" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:839 +msgid "Max volumetric slope negative" +msgstr "Max volumetric slope negative" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:850 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:859 +msgid "Min" +msgstr "Min" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:851 +msgid "This setting represents the minimum PWM your fan needs to work." +msgstr "This setting represents the minimum PWM your fan needs to work." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:860 +msgid "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm." +msgstr "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:868 +msgid "Min print speed" +msgstr "Min print speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:869 +msgid "Slic3r will not scale speed down below this speed." +msgstr "Slic3r will not scale speed down below this speed." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:876 +msgid "Minimum extrusion length" +msgstr "Minimum extrusion length" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:877 +msgid "" +"Generate no less than the number of skirt loops required to consume the " +"specified amount of filament on the bottom layer. For multi-extruder " +"machines, this minimum applies to each extruder." +msgstr "" +"Generate no less than the number of skirt loops required to consume the " +"specified amount of filament on the bottom layer. For multi-extruder " +"machines, this minimum applies to each extruder." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:886 +msgid "Configuration notes" +msgstr "Configuration notes" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:887 +msgid "" +"You can put here your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" +"You can put here your personal notes. This text will be added to the G-code " +"header comments." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:896 +msgid "Nozzle diameter" +msgstr "Nozzle diameter" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:897 +msgid "" +"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" +msgstr "" +"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:903 +msgid "API Key" +msgstr "API Key" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:904 +msgid "" +"Slic3r can upload G-code files to OctoPrint. This field should contain the " +"API Key required for authentication." +msgstr "" +"Slic3r can upload G-code files to OctoPrint. This field should contain the " +"API Key required for authentication." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:910 +msgid "Host or IP" +msgstr "Host or IP" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:911 +msgid "" +"Slic3r can upload G-code files to OctoPrint. This field should contain the " +"hostname or IP address of the OctoPrint instance." +msgstr "" +"Slic3r can upload G-code files to OctoPrint. This field should contain the " +"hostname or IP address of the OctoPrint instance." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:917 +msgid "Only retract when crossing perimeters" +msgstr "Only retract when crossing perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:918 +msgid "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will be probably invisible)." +msgstr "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will be probably invisible)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:924 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1697 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:805 +msgid "Enable" +msgstr "Enable" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:925 +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing. It will enable a tall skirt automatically and move extruders outside " +"such skirt when changing temperatures." +msgstr "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing. It will enable a tall skirt automatically and move extruders outside " +"such skirt when changing temperatures." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:932 +msgid "Output filename format" +msgstr "Output filename format" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:933 +msgid "" +"You can use all configuration options as variables inside this template. For " +"example: [layer_height], [fill_density] etc. You can also use [timestamp], " +"[year], [month], [day], [hour], [minute], [second], [version], " +"[input_filename], [input_filename_base]." +msgstr "" +"You can use all configuration options as variables inside this template. For " +"example: [layer_height], [fill_density] etc. You can also use [timestamp], " +"[year], [month], [day], [hour], [minute], [second], [version], " +"[input_filename], [input_filename_base]." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:942 +msgid "Detect bridging perimeters" +msgstr "Detect bridging perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:944 +msgid "" +"Experimental option to adjust flow for overhangs (bridge flow will be used), " +"to apply bridge speed to them and enable fan." +msgstr "" +"Experimental option to adjust flow for overhangs (bridge flow will be used), " +"to apply bridge speed to them and enable fan." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:950 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:968 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:980 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:990 +msgid "Perimeters" +msgstr "Perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:951 +msgid "" +"This is the acceleration your printer will use for perimeters. A high value " +"like 9000 usually gives good results if your hardware is up to the job. Set " +"zero to disable acceleration control for perimeters." +msgstr "" +"This is the acceleration your printer will use for perimeters. A high value " +"like 9000 usually gives good results if your hardware is up to the job. Set " +"zero to disable acceleration control for perimeters." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:959 +msgid "Perimeter extruder" +msgstr "Perimeter extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:961 +msgid "" +"The extruder to use when printing perimeters and brim. First extruder is 1." +msgstr "" +"The extruder to use when printing perimeters and brim. First extruder is 1." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:970 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 200%) " +"it will be computed over layer height." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 200%) " +"it will be computed over layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:982 +msgid "" +"Speed for perimeters (contours, aka vertical shells). Set to zero for auto." +msgstr "" +"Speed for perimeters (contours, aka vertical shells). Set to zero for auto." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:992 +msgid "" +"This option sets the number of perimeters to generate for each layer. Note " +"that Slic3r may increase this number automatically when it detects sloping " +"surfaces which benefit from a higher number of perimeters if the Extra " +"Perimeters option is enabled." +msgstr "" +"This option sets the number of perimeters to generate for each layer. Note " +"that Slic3r may increase this number automatically when it detects sloping " +"surfaces which benefit from a higher number of perimeters if the Extra " +"Perimeters option is enabled." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:996 +msgid "(minimum)" +msgstr "(minimum)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1003 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:495 +msgid "Post-processing scripts" +msgstr "Post-processing scripts" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1016 +msgid "Printer notes" +msgstr "Printer notes" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1017 +msgid "You can put your notes regarding the printer here." +msgstr "You can put your notes regarding the printer here." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1031 +msgid "Raft layers" +msgstr "Raft layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1033 +msgid "" +"The object will be raised by this number of layers, and support material " +"will be generated under it." +msgstr "" +"The object will be raised by this number of layers, and support material " +"will be generated under it." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1041 +msgid "Resolution" +msgstr "Resolution" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1042 +msgid "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more detail than printers can render. Set to zero to disable any " +"simplification and use full resolution from input." +msgstr "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more detail than printers can render. Set to zero to disable any " +"simplification and use full resolution from input." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1052 +msgid "Minimum travel after retraction" +msgstr "Minimum travel after retraction" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1053 +msgid "" +"Retraction is not triggered when travel moves are shorter than this length." +msgstr "" +"Retraction is not triggered when travel moves are shorter than this length." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1059 +msgid "Retract amount before wipe" +msgstr "Retract amount before wipe" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1060 +msgid "" +"With bowden extruders, it may be wise to do some amount of quick retract " +"before doing the wipe movement." +msgstr "" +"With bowden extruders, it may be wise to do some amount of quick retract " +"before doing the wipe movement." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1067 +msgid "Retract on layer change" +msgstr "Retract on layer change" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1068 +msgid "This flag enforces a retraction whenever a Z move is done." +msgstr "This flag enforces a retraction whenever a Z move is done." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1073 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1082 +msgid "Length" +msgstr "Length" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1074 +msgid "Retraction Length" +msgstr "Retraction Length" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1075 +msgid "" +"When retraction is triggered, filament is pulled back by the specified " +"amount (the length is measured on raw filament, before it enters the " +"extruder)." +msgstr "" +"When retraction is triggered, filament is pulled back by the specified " +"amount (the length is measured on raw filament, before it enters the " +"extruder)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1077 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1087 +msgid "mm (zero to disable)" +msgstr "mm (zero to disable)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1083 +msgid "Retraction Length (Toolchange)" +msgstr "Retraction Length (Toolchange)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1084 +msgid "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder)." +msgstr "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1092 +msgid "Lift Z" +msgstr "Lift Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1093 +msgid "" +"If you set this to a positive value, Z is quickly raised every time a " +"retraction is triggered. When using multiple extruders, only the setting for " +"the first extruder will be considered." +msgstr "" +"If you set this to a positive value, Z is quickly raised every time a " +"retraction is triggered. When using multiple extruders, only the setting for " +"the first extruder will be considered." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1101 +msgid "Above Z" +msgstr "Above Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1102 +msgid "Only lift Z above" +msgstr "Only lift Z above" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1103 +msgid "" +"If you set this to a positive value, Z lift will only take place above the " +"specified absolute Z. You can tune this setting for skipping lift on the " +"first layers." +msgstr "" +"If you set this to a positive value, Z lift will only take place above the " +"specified absolute Z. You can tune this setting for skipping lift on the " +"first layers." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1110 +msgid "Below Z" +msgstr "Below Z" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1111 +msgid "Only lift Z below" +msgstr "Only lift Z below" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1112 +msgid "" +"If you set this to a positive value, Z lift will only take place below the " +"specified absolute Z. You can tune this setting for limiting lift to the " +"first layers." +msgstr "" +"If you set this to a positive value, Z lift will only take place below the " +"specified absolute Z. You can tune this setting for limiting lift to the " +"first layers." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1120 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1128 +msgid "Extra length on restart" +msgstr "Extra length on restart" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1121 +msgid "" +"When the retraction is compensated after the travel move, the extruder will " +"push this additional amount of filament. This setting is rarely needed." +msgstr "" +"When the retraction is compensated after the travel move, the extruder will " +"push this additional amount of filament. This setting is rarely needed." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1129 +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament." +msgstr "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:116 -msgid "Rectangular" -msgstr "Rectangular" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1136 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1137 +msgid "Retraction Speed" +msgstr "Retraction Speed" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:121 -msgid "Size in X and Y of the rectangular plate." -msgstr "Size in X and Y of the rectangular plate." +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1138 +msgid "The speed for retractions (it only applies to the extruder motor)." +msgstr "The speed for retractions (it only applies to the extruder motor)." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:127 -msgid "Origin" -msgstr "Origin" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1144 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1145 +msgid "Deretraction Speed" +msgstr "Deretraction Speed" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:128 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1146 msgid "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." +"The speed for loading of a filament into extruder after retraction (it only " +"applies to the extruder motor). If left to zero, the retraction speed is " +"used." msgstr "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." +"The speed for loading of a filament into extruder after retraction (it only " +"applies to the extruder motor). If left to zero, the retraction speed is " +"used." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:132 -msgid "Circular" -msgstr "Circular" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1153 +msgid "Seam position" +msgstr "Seam position" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:135 -msgid "mm" -msgstr "mm" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1155 +msgid "Position of perimeters starting points." +msgstr "Position of perimeters starting points." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:136 -msgid "Diameter" -msgstr "Diameter" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1171 +msgid "Direction" +msgstr "Direction" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1173 +msgid "Preferred direction of the seam" +msgstr "Preferred direction of the seam" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1174 +msgid "Seam preferred direction" +msgstr "Seam preferred direction" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1182 +msgid "Jitter" +msgstr "Jitter" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1184 +msgid "Seam preferred direction jitter" +msgstr "Seam preferred direction jitter" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1185 +msgid "Preferred direction of the seam - jitter" +msgstr "Preferred direction of the seam - jitter" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1195 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:989 +msgid "Serial port" +msgstr "Serial port" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1196 +msgid "USB/serial port for printer connection." +msgstr "USB/serial port for printer connection." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1204 +msgid "Serial port speed" +msgstr "Serial port speed" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1205 +msgid "Speed (baud) of USB/serial port for printer connection." +msgstr "Speed (baud) of USB/serial port for printer connection." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1214 +msgid "Distance from object" +msgstr "Distance from object" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:137 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1215 msgid "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." +"Distance between skirt and object(s). Set this to zero to attach the skirt " +"to the object(s) and get a brim for better adhesion." msgstr "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." +"Distance between skirt and object(s). Set this to zero to attach the skirt " +"to the object(s) and get a brim for better adhesion." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:141 -msgid "Custom" -msgstr "Custom" +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1223 +msgid "Skirt height" +msgstr "Skirt height" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1224 +msgid "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." +msgstr "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1231 +msgid "Loops (minimum)" +msgstr "Loops (minimum)" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1232 +msgid "Skirt Loops" +msgstr "Skirt Loops" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1233 +msgid "" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"this to zero to disable skirt completely." +msgstr "" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"this to zero to disable skirt completely." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1241 +msgid "Slow down if layer print time is below" +msgstr "Slow down if layer print time is below" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1242 +msgid "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value." +msgstr "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1252 +msgid "Small perimeters" +msgstr "Small perimeters" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1254 +msgid "" +"This separate setting will affect the speed of perimeters having radius <= " +"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " +"be calculated on the perimeters speed setting above. Set to zero for auto." +msgstr "" +"This separate setting will affect the speed of perimeters having radius <= " +"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " +"be calculated on the perimeters speed setting above. Set to zero for auto." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1264 +msgid "Solid infill threshold area" +msgstr "Solid infill threshold area" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1266 +msgid "" +"Force solid infill for regions having a smaller area than the specified " +"threshold." +msgstr "" +"Force solid infill for regions having a smaller area than the specified " +"threshold." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1267 +msgid "mm\\u00B2" +msgstr "mm\\u00B2" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1273 +msgid "Solid infill extruder" +msgstr "Solid infill extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1275 +msgid "The extruder to use when printing solid infill." +msgstr "The extruder to use when printing solid infill." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1281 +msgid "Solid infill every" +msgstr "Solid infill every" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1283 +msgid "" +"This feature allows to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." +msgstr "" +"This feature allows to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1293 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1303 +msgid "Solid infill" +msgstr "Solid infill" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1295 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left zero, default extrusion width will be used if set, " +"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " +"(for example 90%) it will be computed over layer height." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left zero, default extrusion width will be used if set, " +"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage " +"(for example 90%) it will be computed over layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1305 +msgid "" +"Speed for printing solid regions (top/bottom/internal horizontal shells). " +"This can be expressed as a percentage (for example: 80%) over the default " +"infill speed above. Set to zero for auto." +msgstr "" +"Speed for printing solid regions (top/bottom/internal horizontal shells). " +"This can be expressed as a percentage (for example: 80%) over the default " +"infill speed above. Set to zero for auto." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1316 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:331 +msgid "Solid layers" +msgstr "Solid layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1317 +msgid "Number of solid layers to generate on top and bottom surfaces." +msgstr "Number of solid layers to generate on top and bottom surfaces." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1324 +msgid "Spiral vase" +msgstr "Spiral vase" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1325 +msgid "" +"This feature will raise Z gradually while printing a single-walled object in " +"order to remove any visible seam. This option requires a single perimeter, " +"no infill, no top solid layers and no support material. You can still set " +"any number of bottom solid layers as well as skirt/brim loops. It won't work " +"when printing more than an object." +msgstr "" +"This feature will raise Z gradually while printing a single-walled object in " +"order to remove any visible seam. This option requires a single perimeter, " +"no infill, no top solid layers and no support material. You can still set " +"any number of bottom solid layers as well as skirt/brim loops. It won't work " +"when printing more than an object." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1334 +msgid "Temperature variation" +msgstr "Temperature variation" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1335 +msgid "" +"Temperature difference to be applied when an extruder is not active. Enables " +"a full-height \"sacrificial\" skirt on which the nozzles are periodically " +"wiped." +msgstr "" +"Temperature difference to be applied when an extruder is not active. Enables " +"a full-height \"sacrificial\" skirt on which the nozzles are periodically " +"wiped." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1344 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1359 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:846 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1119 +msgid "Start G-code" +msgstr "Start G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1345 +msgid "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder just started heating, and before extruder " +"has finished heating. If Slic3r detects M104 or M190 in your custom codes, " +"such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S[first_layer_temperature]\" command wherever you want." +msgstr "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder just started heating, and before extruder " +"has finished heating. If Slic3r detects M104 or M190 in your custom codes, " +"such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S[first_layer_temperature]\" command wherever you want." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1360 +msgid "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode. This is used to override settings for a specific filament. If Slic3r " +"detects M104, M109, M140 or M190 in your custom codes, such commands will " +"not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S[first_layer_temperature]\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." +msgstr "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode. This is used to override settings for a specific filament. If Slic3r " +"detects M104, M109, M140 or M190 in your custom codes, such commands will " +"not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S[first_layer_temperature]\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1375 +msgid "Single Extruder Multi Material" +msgstr "Single Extruder Multi Material" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1376 +msgid "The printer multiplexes filaments into a single hot end." +msgstr "The printer multiplexes filaments into a single hot end." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1381 +msgid "Generate support material" +msgstr "Generate support material" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1383 +msgid "Enable support material generation." +msgstr "Enable support material generation." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1388 +msgid "XY separation between an object and its support" +msgstr "XY separation between an object and its support" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1390 +msgid "" +"XY separation between an object and its support. If expressed as percentage " +"(for example 50%), it will be calculated over external perimeter width." +msgstr "" +"XY separation between an object and its support. If expressed as percentage " +"(for example 50%), it will be calculated over external perimeter width." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1400 +msgid "Pattern angle" +msgstr "Pattern angle" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1402 +msgid "" +"Use this setting to rotate the support material pattern on the horizontal " +"plane." +msgstr "" +"Use this setting to rotate the support material pattern on the horizontal " +"plane." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1410 +msgid "Support on build plate only" +msgstr "Support on build plate only" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1412 +msgid "" +"Only create support if it lies on a build plate. Don't create support on a " +"print." +msgstr "" +"Only create support if it lies on a build plate. Don't create support on a " +"print." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1418 +msgid "Contact Z distance" +msgstr "Contact Z distance" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1420 +msgid "" +"The vertical distance between object and support material interface. Setting " +"this to 0 will also prevent Slic3r from using bridge flow and speed for the " +"first object layer." +msgstr "" +"The vertical distance between object and support material interface. Setting " +"this to 0 will also prevent Slic3r from using bridge flow and speed for the " +"first object layer." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1433 +msgid "Enforce support for the first" +msgstr "Enforce support for the first" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1435 +msgid "" +"Generate support material for the specified number of layers counting from " +"bottom, regardless of whether normal support material is enabled or not and " +"regardless of any angle threshold. This is useful for getting more adhesion " +"of objects having a very thin or poor footprint on the build plate." +msgstr "" +"Generate support material for the specified number of layers counting from " +"bottom, regardless of whether normal support material is enabled or not and " +"regardless of any angle threshold. This is useful for getting more adhesion " +"of objects having a very thin or poor footprint on the build plate." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1441 +msgid "Enforce support for the first n layers" +msgstr "Enforce support for the first n layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1446 +msgid "Support material/raft/skirt extruder" +msgstr "Support material/raft/skirt extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1448 +msgid "" +"The extruder to use when printing support material, raft and skirt (1+, 0 to " +"use the current extruder to minimize tool changes)." +msgstr "" +"The extruder to use when printing support material, raft and skirt (1+, 0 to " +"use the current extruder to minimize tool changes)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1457 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 90%) it will be computed over layer height." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 90%) it will be computed over layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1465 +msgid "Interface loops" +msgstr "Interface loops" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1467 +msgid "" +"Cover the top contact layer of the supports with loops. Disabled by default." +msgstr "" +"Cover the top contact layer of the supports with loops. Disabled by default." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1472 +msgid "Support material/raft interface extruder" +msgstr "Support material/raft interface extruder" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1474 +msgid "" +"The extruder to use when printing support material interface (1+, 0 to use " +"the current extruder to minimize tool changes). This affects raft too." +msgstr "" +"The extruder to use when printing support material interface (1+, 0 to use " +"the current extruder to minimize tool changes). This affects raft too." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1481 +msgid "Interface layers" +msgstr "Interface layers" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:145 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1483 +msgid "" +"Number of interface layers to insert between the object(s) and support " +"material." +msgstr "" +"Number of interface layers to insert between the object(s) and support " +"material." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1490 +msgid "Interface pattern spacing" +msgstr "Interface pattern spacing" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1492 +msgid "Spacing between interface lines. Set zero to get a solid interface." +msgstr "Spacing between interface lines. Set zero to get a solid interface." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1499 +msgid "Support material interface" +msgstr "Support material interface" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1501 +msgid "" +"Speed for printing support material interface layers. If expressed as " +"percentage (for example 50%) it will be calculated over support material " +"speed." +msgstr "" +"Speed for printing support material interface layers. If expressed as " +"percentage (for example 50%) it will be calculated over support material " +"speed." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1510 +msgid "Pattern" +msgstr "Pattern" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1512 +msgid "Pattern used to generate support material." +msgstr "Pattern used to generate support material." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1526 +msgid "Pattern spacing" +msgstr "Pattern spacing" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1528 +msgid "Spacing between support material lines." +msgstr "Spacing between support material lines." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1537 +msgid "Speed for printing support material." +msgstr "Speed for printing support material." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1544 +msgid "Synchronize with object layers" +msgstr "Synchronize with object layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1546 +msgid "" +"Synchronize support layers with the object print layers. This is useful with " +"multi-material printers, where the extruder switch is expensive." +msgstr "" +"Synchronize support layers with the object print layers. This is useful with " +"multi-material printers, where the extruder switch is expensive." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1552 +msgid "Overhang threshold" +msgstr "Overhang threshold" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1554 +msgid "" +"Support material will not be generated for overhangs whose slope angle " +"(90\\u00B0 = vertical) is above the given threshold. In other words, this " +"value represent the most horizontal slope (measured from the horizontal " +"plane) that you can print without support material. Set to zero for " +"automatic detection (recommended)." +msgstr "" +"Support material will not be generated for overhangs whose slope angle " +"(90\\u00B0 = vertical) is above the given threshold. In other words, this " +"value represent the most horizontal slope (measured from the horizontal " +"plane) that you can print without support material. Set to zero for " +"automatic detection (recommended)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1566 +msgid "With sheath around the support" +msgstr "With sheath around the support" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1568 +msgid "" +"Add a sheath (a single perimeter line) around the base support. This makes " +"the support more reliable, but also more difficult to remove." +msgstr "" +"Add a sheath (a single perimeter line) around the base support. This makes " +"the support more reliable, but also more difficult to remove." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1575 +msgid "" +"Extruder temperature for layers after the first one. Set this to zero to " +"disable temperature control commands in the output." +msgstr "" +"Extruder temperature for layers after the first one. Set this to zero to " +"disable temperature control commands in the output." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1578 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:793 +msgid "Temperature" +msgstr "Temperature" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1584 +msgid "Detect thin walls" +msgstr "Detect thin walls" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1586 +msgid "" +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace)." +msgstr "" +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1592 +msgid "Threads" +msgstr "Threads" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1593 +msgid "" +"Threads are used to parallelize long-running tasks. Optimal threads number " +"is slightly above the number of available cores/processors." +msgstr "" +"Threads are used to parallelize long-running tasks. Optimal threads number " +"is slightly above the number of available cores/processors." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1604 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1143 +msgid "Tool change G-code" +msgstr "Tool change G-code" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1605 +msgid "" +"This custom code is inserted right before every extruder change. Note that " +"you can use placeholder variables for all Slic3r settings as well as " +"[previous_extruder] and [next_extruder]." +msgstr "" +"This custom code is inserted right before every extruder change. Note that " +"you can use placeholder variables for all Slic3r settings as well as " +"[previous_extruder] and [next_extruder]." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1615 +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1626 +msgid "Top solid infill" +msgstr "Top solid infill" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1617 +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 90%) it will be computed over layer height." +msgstr "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 90%) it will be computed over layer height." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1628 +msgid "" +"Speed for printing top solid layers (it only applies to the uppermost " +"external layers and not to their internal solid layers). You may want to " +"slow down this to get a nicer surface finish. This can be expressed as a " +"percentage (for example: 80%) over the solid infill speed above. Set to zero " +"for auto." +msgstr "" +"Speed for printing top solid layers (it only applies to the uppermost " +"external layers and not to their internal solid layers). You may want to " +"slow down this to get a nicer surface finish. This can be expressed as a " +"percentage (for example: 80%) over the solid infill speed above. Set to zero " +"for auto." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1640 +msgid "Top" +msgstr "Top" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1642 +msgid "Number of solid layers to generate on top surfaces." +msgstr "Number of solid layers to generate on top surfaces." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1644 +msgid "Top solid layers" +msgstr "Top solid layers" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1649 +msgid "Travel" +msgstr "Travel" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1650 +msgid "Speed for travel moves (jumps between distant extrusion points)." +msgstr "Speed for travel moves (jumps between distant extrusion points)." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1658 +msgid "Use firmware retraction" +msgstr "Use firmware retraction" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1659 +msgid "" +"This experimental setting uses G10 and G11 commands to have the firmware " +"handle the retraction. This is only supported in recent Marlin." +msgstr "" +"This experimental setting uses G10 and G11 commands to have the firmware " +"handle the retraction. This is only supported in recent Marlin." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1665 +msgid "Use relative E distances" +msgstr "Use relative E distances" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1666 +msgid "" +"If your firmware requires relative E values, check this, otherwise leave it " +"unchecked. Most firmwares use absolute values." +msgstr "" +"If your firmware requires relative E values, check this, otherwise leave it " +"unchecked. Most firmwares use absolute values." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1672 +msgid "Use volumetric E" +msgstr "Use volumetric E" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1673 +msgid "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." +msgstr "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1683 +msgid "Enable variable layer height feature" +msgstr "Enable variable layer height feature" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1684 +msgid "" +"Some printers or printer setups may have difficulties printing with a " +"variable layer height. Enabled by default." +msgstr "" +"Some printers or printer setups may have difficulties printing with a " +"variable layer height. Enabled by default." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1690 +msgid "Wipe while retracting" +msgstr "Wipe while retracting" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1691 +msgid "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders." +msgstr "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1698 +msgid "" +"Multi material printers may need to prime or purge extruders on tool " +"changes. Extrude the excess material into the wipe tower." +msgstr "" +"Multi material printers may need to prime or purge extruders on tool " +"changes. Extrude the excess material into the wipe tower." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1704 +msgid "Position X" +msgstr "Position X" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1705 +msgid "X coordinate of the left front corner of a wipe tower" +msgstr "X coordinate of the left front corner of a wipe tower" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1711 +msgid "Position Y" +msgstr "Position Y" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1712 +msgid "Y coordinate of the left front corner of a wipe tower" +msgstr "Y coordinate of the left front corner of a wipe tower" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1718 +msgid "Width" +msgstr "Width" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1719 +msgid "Width of a wipe tower" +msgstr "Width of a wipe tower" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1725 +msgid "Per color change depth" +msgstr "Per color change depth" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1726 +msgid "" +"Depth of a wipe color per color change. For N colors, there will be maximum " +"(N-1) tool switches performed, therefore the total depth of the wipe tower " +"will be (N-1) times this value." +msgstr "" +"Depth of a wipe color per color change. For N colors, there will be maximum " +"(N-1) tool switches performed, therefore the total depth of the wipe tower " +"will be (N-1) times this value." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1734 +msgid "XY Size Compensation" +msgstr "XY Size Compensation" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1736 +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning hole sizes." +msgstr "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning hole sizes." + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1744 +msgid "Z offset" +msgstr "Z offset" + +#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1745 +msgid "" +"This value will be added (or subtracted) from all the Z coordinates in the " +"output G-code. It is used to compensate for bad Z endstop position: for " +"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " +"print bed, set this to -0.3 (or fix your endstop)." +msgstr "" +"This value will be added (or subtracted) from all the Z coordinates in the " +"output G-code. It is used to compensate for bad Z endstop position: for " +"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " +"print bed, set this to -0.3 (or fix your endstop)." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:39 +msgid "Shape" +msgstr "Shape" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:46 +msgid "Rectangular" +msgstr "Rectangular" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:62 +msgid "Circular" +msgstr "Circular" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:75 msgid "Load shape from STL..." msgstr "Load shape from STL..." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:190 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:120 msgid "Settings" msgstr "Settings" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:368 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:298 msgid "Choose a file to import bed shape from (STL/OBJ/AMF/PRUSA):" msgstr "Choose a file to import bed shape from (STL/OBJ/AMF/PRUSA):" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:385 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:315 msgid "Error! " msgstr "Error! " -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:394 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:324 msgid "The selected file contains no geometry." msgstr "The selected file contains no geometry." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:398 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:328 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" "The selected file contains several disjoint areas. This is not supported." -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.hpp:45 +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.hpp:42 msgid "Bed Shape" msgstr "Bed Shape" -#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:318 +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:468 msgid "Error" msgstr "Error" -#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:323 +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:473 msgid "Notice" msgstr "Notice" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:51 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:50 msgid "Save current " msgstr "Save current " -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:52 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:51 msgid "Delete this preset" msgstr "Delete this preset" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:324 -msgid "Layers and perimeters" -msgstr "Layers and perimeters" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:325 -msgid "Layer height" -msgstr "Layer height" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:329 -msgid "Vertical shells" -msgstr "Vertical shells" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:340 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:330 msgid "Horizontal shells" msgstr "Horizontal shells" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:341 -msgid "Solid layers" -msgstr "Solid layers" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:346 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:336 msgid "Quality (slower slicing)" msgstr "Quality (slower slicing)" #: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:353 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:367 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:460 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:463 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:839 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1122 -msgid "Advanced" -msgstr "Advanced" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:357 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:358 -msgid "Infill" -msgstr "Infill" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:363 msgid "Reducing printing time" msgstr "Reducing printing time" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:375 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:365 msgid "Skirt and brim" msgstr "Skirt and brim" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:376 -msgid "Skirt" -msgstr "Skirt" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:382 -msgid "Brim" -msgstr "Brim" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:385 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:386 -msgid "Support material" -msgstr "Support material" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:391 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:381 msgid "Raft" msgstr "Raft" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:395 -msgid "Options for support material and raft" -msgstr "Options for support material and raft" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:409 -msgid "Speed" -msgstr "Speed" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:410 -msgid "Speed for print moves" -msgstr "Speed for print moves" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:422 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:412 msgid "Speed for non-print moves" msgstr "Speed for non-print moves" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:425 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:415 msgid "Modifiers" msgstr "Modifiers" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:428 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:418 msgid "Acceleration control (advanced)" msgstr "Acceleration control (advanced)" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:435 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:425 msgid "Autospeed (advanced)" msgstr "Autospeed (advanced)" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:441 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:431 msgid "Multiple Extruders" msgstr "Multiple Extruders" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:442 -msgid "Extruders" -msgstr "Extruders" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:449 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:439 msgid "Ooze prevention" msgstr "Ooze prevention" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:453 -msgid "Wipe tower" -msgstr "Wipe tower" - #: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:464 -msgid "Extrusion width" -msgstr "Extrusion width" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:474 msgid "Overlap" msgstr "Overlap" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:477 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:467 msgid "Flow" msgstr "Flow" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:480 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:470 msgid "Other" msgstr "Other" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:487 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:477 msgid "Output options" msgstr "Output options" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:488 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:478 msgid "Sequential printing" msgstr "Sequential printing" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:499 -msgid "Output file" -msgstr "Output file" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:505 -msgid "Post-processing scripts" -msgstr "Post-processing scripts" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:511 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:512 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:867 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:868 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1165 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1166 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:501 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:502 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:858 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:859 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1155 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1156 msgid "Notes" msgstr "Notes" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:518 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:875 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:508 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:866 msgid "Dependencies" msgstr "Dependencies" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:519 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:876 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:509 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:867 msgid "Profile dependencies" msgstr "Profile dependencies" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:794 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:795 -msgid "Filament" -msgstr "Filament" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:802 -msgid "Temperature" -msgstr "Temperature" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:803 -msgid "Extruder" -msgstr "Extruder" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:808 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:799 msgid "Bed" msgstr "Bed" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:813 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:804 msgid "Cooling" msgstr "Cooling" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:814 -msgid "Enable" -msgstr "Enable" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:825 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:816 msgid "Fan settings" msgstr "Fan settings" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:834 -msgid "Cooling thresholds" -msgstr "Cooling thresholds" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:840 -msgid "Filament properties" -msgstr "Filament properties" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:844 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:835 msgid "Print speed override" msgstr "Print speed override" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:854 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1128 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:845 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1118 msgid "Custom G-code" msgstr "Custom G-code" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:855 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1129 -msgid "Start G-code" -msgstr "Start G-code" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:861 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1135 -msgid "End G-code" -msgstr "End G-code" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:945 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:936 msgid "General" msgstr "General" -#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:120 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:946 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:937 msgid "Size and coordinates" msgstr "Size and coordinates" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:948 -msgid "Bed shape" -msgstr "Bed shape" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:950 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1649 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:941 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1642 msgid "Set" msgstr "Set" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:971 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:961 msgid "Capabilities" msgstr "Capabilities" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:998 -msgid "USB/Serial connection" -msgstr "USB/Serial connection" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1004 -msgid "Rescan serial ports" -msgstr "Rescan serial ports" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1013 -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1081 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1003 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1071 msgid "Test" msgstr "Test" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1026 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1016 msgid "Connection to printer works correctly." msgstr "Connection to printer works correctly." -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1026 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1016 msgid "Success!" msgstr "Success!" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1029 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1019 msgid "Connection failed." msgstr "Connection failed." -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1041 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1031 msgid "OctoPrint upload" msgstr "OctoPrint upload" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1044 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1034 msgid "Browse" msgstr "Browse" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1056 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1046 msgid "Button BROWSE was clicked!" msgstr "Button BROWSE was clicked!" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1091 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1081 msgid "Button TEST was clicked!" msgstr "Button TEST was clicked!" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1119 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1109 msgid "Firmware" msgstr "Firmware" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1141 -msgid "Before layer change G-code" -msgstr "Before layer change G-code" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1147 -msgid "After layer change G-code" -msgstr "After layer change G-code" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1153 -msgid "Tool change G-code" -msgstr "Tool change G-code" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1159 -msgid "Between objects G-code (for sequential printing)" -msgstr "Between objects G-code (for sequential printing)" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1195 -msgid "Extruder " -msgstr "Extruder " - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1198 -msgid "Size" -msgstr "Size" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1201 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1191 msgid "Layer height limits" msgstr "Layer height limits" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1206 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1196 msgid "Position (for multi-extruder printers)" msgstr "Position (for multi-extruder printers)" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1209 -msgid "Retraction" -msgstr "Retraction" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1212 -msgid "Only lift Z" -msgstr "Only lift Z" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1225 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1215 msgid "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" @@ -445,11 +2652,11 @@ msgstr "" "Retraction when tool is disabled (advanced settings for multi-extruder " "setups)" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1229 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1219 msgid "Preview" msgstr "Preview" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1320 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1310 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" @@ -459,92 +2666,351 @@ msgstr "" "\n" "Shall I disable it in order to enable Firmware Retraction?" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1322 -msgid "Firmware Retraction" -msgstr "Firmware Retraction" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1565 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1558 msgid "The supplied name is empty. It can't be saved." msgstr "The supplied name is empty. It can't be saved." -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1576 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1569 msgid "Something is wrong. It can't be saved." msgstr "Something is wrong. It can't be saved." -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1593 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1586 msgid "remove" msgstr "remove" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1593 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1586 msgid "delete" msgstr "delete" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1594 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1587 msgid "Are you sure you want to " msgstr "Are you sure you want to " -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1594 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1587 msgid " the selected preset?" msgstr " the selected preset?" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1595 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1588 msgid "Remove" msgstr "Remove" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1595 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1588 msgid "Delete" msgstr "Delete" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1596 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1589 msgid " Preset" msgstr " Preset" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1648 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1641 msgid "All" msgstr "All" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1679 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1672 msgid "Select the printers this profile is compatible with." msgstr "Select the printers this profile is compatible with." -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1680 -msgid "Compatible printers" -msgstr "Compatible printers" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1763 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1756 msgid "Save " msgstr "Save " -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1763 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1756 msgid " as:" msgstr " as:" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1797 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1790 msgid "" "The supplied name is not valid; the following characters are not allowed:" msgstr "" "The supplied name is not valid; the following characters are not allowed:" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1800 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1793 msgid "The supplied name is not available." msgstr "The supplied name is not available." -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:178 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:182 msgid "Print Settings" msgstr "Print Settings" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:198 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:202 msgid "Filament Settings" msgstr "Filament Settings" -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:224 -msgid "Printer Settings" -msgstr "Printer Settings" - -#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:244 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:248 msgid "Save preset" msgstr "Save preset" #: c:\src\Slic3r\xs\src\slic3r\GUI\Field.cpp:35 msgid "default" msgstr "default" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:71 +msgid "Custom" +msgstr "Custom" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:212 +msgid "Array of language names and identifiers should have the same size." +msgstr "Array of language names and identifiers should have the same size." + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:223 +msgid "Select the language" +msgstr "Select the language" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:223 +msgid "Language" +msgstr "Language" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:321 +msgid "Change Application Language" +msgstr "Change Application Language" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:314 +msgid "Layers and perimeters" +msgstr "Layers and perimeters" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:319 +msgid "Vertical shells" +msgstr "Vertical shells" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:366 +msgid "Skirt" +msgstr "Skirt" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:372 +msgid "Brim" +msgstr "Brim" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:385 +msgid "Options for support material and raft" +msgstr "Options for support material and raft" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:400 +msgid "Speed for print moves" +msgstr "Speed for print moves" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:443 +msgid "Wipe tower" +msgstr "Wipe tower" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:454 +msgid "Extrusion width" +msgstr "Extrusion width" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:480 +msgid "Extruder clearance (mm)" +msgstr "Extruder clearance (mm)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:489 +msgid "Output file" +msgstr "Output file" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:534 +#, c-format +msgid "" +"The Spiral Vase mode requires:\n" +"- one perimeter\n" +"- no top solid layers\n" +"- 0% fill density\n" +"- no support material\n" +"- no ensure_vertical_shell_thickness\n" +"\n" +"Shall I adjust those settings in order to enable Spiral Vase?" +msgstr "" +"The Spiral Vase mode requires:\n" +"- one perimeter\n" +"- no top solid layers\n" +"- 0% fill density\n" +"- no support material\n" +"- no ensure_vertical_shell_thickness\n" +"\n" +"Shall I adjust those settings in order to enable Spiral Vase?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:541 +msgid "Spiral Vase" +msgstr "Spiral Vase" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:560 +msgid "" +"The Wipe Tower currently supports only:\n" +"- first layer height 0.2mm\n" +"- layer height from 0.15mm to 0.35mm\n" +"\n" +"Shall I adjust those settings in order to enable the Wipe Tower?" +msgstr "" +"The Wipe Tower currently supports only:\n" +"- first layer height 0.2mm\n" +"- layer height from 0.15mm to 0.35mm\n" +"\n" +"Shall I adjust those settings in order to enable the Wipe Tower?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:564 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:585 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:602 +msgid "Wipe Tower" +msgstr "Wipe tower" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:581 +msgid "" +"The Wipe Tower currently supports the non-soluble supports only\n" +"if they are printed with the current extruder without triggering a tool " +"change.\n" +"(both support_material_extruder and support_material_interface_extruder need " +"to be set to 0).\n" +"\n" +"Shall I adjust those settings in order to enable the Wipe Tower?" +msgstr "" +"The Wipe Tower currently supports the non-soluble supports only\n" +"if they are printed with the current extruder without triggering a tool " +"change.\n" +"(both support_material_extruder and support_material_interface_extruder need " +"to be set to 0).\n" +"\n" +"Shall I adjust those settings in order to enable the Wipe Tower?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:599 +msgid "" +"For the Wipe Tower to work with the soluble supports, the support layers\n" +"need to be synchronized with the object layers.\n" +"\n" +"Shall I synchronize support layers in order to enable the Wipe Tower?" +msgstr "" +"For the Wipe Tower to work with the soluble supports, the support layers\n" +"need to be synchronized with the object layers.\n" +"\n" +"Shall I synchronize support layers in order to enable the Wipe Tower?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:617 +msgid "" +"Supports work better, if the following feature is enabled:\n" +"- Detect bridging perimeters\n" +"\n" +"Shall I adjust those settings for supports?" +msgstr "" +"Supports work better, if the following feature is enabled:\n" +"- Detect bridging perimeters\n" +"\n" +"Shall I adjust those settings for supports?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:620 +msgid "Support Generator" +msgstr "Support Generator" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662 +msgid "The " +msgstr "The " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662 +#, c-format +msgid "" +" infill pattern is not supposed to work at 100% density.\n" +"\n" +"Shall I switch to rectilinear fill pattern?" +msgstr "" +" infill pattern is not supposed to work at 100% density.\n" +"\n" +"Shall I switch to rectilinear fill pattern?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:785 +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:786 +msgid "Filament" +msgstr "Filament" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:817 +msgid "Fan speed" +msgstr "Fan speed" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:825 +msgid "Cooling thresholds" +msgstr "Cooling thresholds" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:831 +msgid "Filament properties" +msgstr "Filament properties" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:988 +msgid "USB/Serial connection" +msgstr "USB/Serial connection" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:994 +msgid "Rescan serial ports" +msgstr "Rescan serial ports" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1149 +msgid "Between objects G-code (for sequential printing)" +msgstr "Between objects G-code (for sequential printing)" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1185 +msgid "Extruder " +msgstr "Extruder " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1199 +msgid "Retraction" +msgstr "Retraction" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1202 +msgid "Only lift Z" +msgstr "Only lift Z" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1312 +msgid "Firmware Retraction" +msgstr "Firmware Retraction" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1467 +msgid "Default " +msgstr "Default " + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1467 +msgid " preset" +msgstr " preset" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1468 +msgid " preset\n" +msgstr " preset\n" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1486 +msgid "" +"\n" +"\n" +"is not compatible with printer\n" +msgstr "" +"\n" +"\n" +"is not compatible with printer\n" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1486 +msgid "" +"\n" +"\n" +"and it has the following unsaved changes:" +msgstr "" +"\n" +"\n" +"and it has the following unsaved changes:" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1487 +msgid "" +"\n" +"\n" +"has the following unsaved changes:" +msgstr "" +"\n" +"\n" +"has the following unsaved changes:" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1489 +msgid "" +"\n" +"\n" +"Discard changes and continue anyway?" +msgstr "" +"\n" +"\n" +"Discard changes and continue anyway?" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1490 +msgid "Unsaved Changes" +msgstr "Unsaved Changes" + +#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:228 +msgid "Printer Settings" +msgstr "Printer Settings" diff --git a/resources/localization/uk/Slic3rPE.mo b/resources/localization/uk/Slic3rPE.mo index b04573266..40e32c81e 100644 Binary files a/resources/localization/uk/Slic3rPE.mo and b/resources/localization/uk/Slic3rPE.mo differ -- cgit v1.2.3