# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2018-06-04 12:03+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#: xs/src/slic3r/GUI/AboutDialog.cpp:32
msgid "About Slic3r"
msgstr ""

#: xs/src/slic3r/GUI/AboutDialog.cpp:67
msgid "Version"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:39
msgid "Shape"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:46
msgid "Rectangular"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:50 xs/src/slic3r/GUI/Tab.cpp:1743
#: lib/Slic3r/GUI/Plater.pm:432
msgid "Size"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:51
msgid "Size in X and Y of the rectangular plate."
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:57
msgid "Origin"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:58
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:62
msgid "Circular"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:65
#: xs/src/slic3r/GUI/ConfigWizard.cpp:87
#: xs/src/slic3r/GUI/ConfigWizard.cpp:434
#: xs/src/slic3r/GUI/ConfigWizard.cpp:448
#: xs/src/slic3r/GUI/RammingChart.cpp:86
#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:84
#: xs/src/libslic3r/PrintConfig.cpp:130 xs/src/libslic3r/PrintConfig.cpp:173
#: xs/src/libslic3r/PrintConfig.cpp:181 xs/src/libslic3r/PrintConfig.cpp:229
#: xs/src/libslic3r/PrintConfig.cpp:240 xs/src/libslic3r/PrintConfig.cpp:354
#: xs/src/libslic3r/PrintConfig.cpp:365 xs/src/libslic3r/PrintConfig.cpp:384
#: xs/src/libslic3r/PrintConfig.cpp:497 xs/src/libslic3r/PrintConfig.cpp:851
#: xs/src/libslic3r/PrintConfig.cpp:871 xs/src/libslic3r/PrintConfig.cpp:879
#: xs/src/libslic3r/PrintConfig.cpp:937 xs/src/libslic3r/PrintConfig.cpp:955
#: xs/src/libslic3r/PrintConfig.cpp:973 xs/src/libslic3r/PrintConfig.cpp:1035
#: xs/src/libslic3r/PrintConfig.cpp:1152 xs/src/libslic3r/PrintConfig.cpp:1160
#: xs/src/libslic3r/PrintConfig.cpp:1202 xs/src/libslic3r/PrintConfig.cpp:1211
#: xs/src/libslic3r/PrintConfig.cpp:1221 xs/src/libslic3r/PrintConfig.cpp:1229
#: xs/src/libslic3r/PrintConfig.cpp:1237 xs/src/libslic3r/PrintConfig.cpp:1323
#: xs/src/libslic3r/PrintConfig.cpp:1529 xs/src/libslic3r/PrintConfig.cpp:1599
#: xs/src/libslic3r/PrintConfig.cpp:1633 xs/src/libslic3r/PrintConfig.cpp:1829
#: xs/src/libslic3r/PrintConfig.cpp:1836 xs/src/libslic3r/PrintConfig.cpp:1843
#: xs/src/libslic3r/PrintConfig.cpp:1857 xs/src/libslic3r/PrintConfig.cpp:1867
#: xs/src/libslic3r/PrintConfig.cpp:1877
msgid "mm"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:66
#: xs/src/libslic3r/PrintConfig.cpp:494
msgid "Diameter"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:67
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:71
#: xs/src/libslic3r/GCode/PreviewData.cpp:170
#: lib/Slic3r/GUI/Plater/3DPreview.pm:102
msgid "Custom"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:75
msgid "Load shape from STL..."
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:120
msgid "Settings"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:299
msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:316
msgid "Error! "
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:325
msgid "The selected file contains no geometry."
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.cpp:329
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr ""

#: xs/src/slic3r/GUI/BedShapeDialog.hpp:44
#: xs/src/slic3r/GUI/ConfigWizard.cpp:397
msgid "Bed Shape"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:53
msgid "Network lookup"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:66
msgid "Address"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:67
msgid "Hostname"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:68
msgid "Service name"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:69
msgid "OctoPrint version"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:187
msgid "Searching for devices"
msgstr ""

#: xs/src/slic3r/GUI/BonjourDialog.cpp:194
msgid "Finished"
msgstr ""

#: xs/src/slic3r/GUI/ButtonsDescription.cpp:13
msgid "Buttons And Text Colors Description"
msgstr ""

#: xs/src/slic3r/GUI/ButtonsDescription.cpp:38
msgid "Value is the same as the system value"
msgstr ""

#: xs/src/slic3r/GUI/ButtonsDescription.cpp:55
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:15
msgid "Upgrade"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:17
msgid "Downgrade"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Before roll back"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "User"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
msgid "Unknown"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:36
msgid "Active: "
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:42
msgid "slic3r version"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:43
msgid "print"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
msgid "filaments"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
msgid "printer"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:49 xs/src/slic3r/GUI/Tab.cpp:756
msgid "vendor"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:49
msgid "version"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:50
msgid "min slic3r version"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "max slic3r version"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
msgid "model"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
msgid "variants"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:67
msgid "Incompatible with this Slic3r"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:70
msgid "Activate"
msgstr ""

#: xs/src/slic3r/GUI/ConfigSnapshotDialog.cpp:96 xs/src/slic3r/GUI/GUI.cpp:319
msgid "Configuration Snapshots"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:87
msgid "nozzle"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:105
msgid "Select all"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:106
msgid "Select none"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:207
#, possible-c-format
msgid "Welcome to the Slic3r %s"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:207
msgid "Welcome"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:213 xs/src/slic3r/GUI/GUI.cpp:316
#, possible-c-format
msgid "Run %s"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:215
#, possible-c-format
msgid ""
"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
"configuration; just a few settings and you will be ready to print."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:219
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:240
msgid "Other vendors"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:242
msgid "Custom setup"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:266
msgid "Automatic updates"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:266
msgid "Updates"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:274 xs/src/slic3r/GUI/Preferences.cpp:59
msgid "Check for application updates"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:277 xs/src/slic3r/GUI/Preferences.cpp:61
msgid ""
"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
"version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:281 xs/src/slic3r/GUI/Preferences.cpp:67
msgid "Update built-in Presets automatically"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:284 xs/src/slic3r/GUI/Preferences.cpp:69
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:285
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:290
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:297
msgid "Other Vendors"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:299
msgid "Pick another vendor supported by Slic3r PE:"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:358
msgid "Firmware Type"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:358 xs/src/slic3r/GUI/Tab.cpp:1626
msgid "Firmware"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:362
msgid "Choose the type of firmware used by your printer."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:397
msgid "Bed Shape and Size"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:400
msgid "Set the shape of your printer's bed."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:414
msgid "Filament and Nozzle Diameters"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:414
msgid "Print Diameters"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:430
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:433
msgid "Nozzle Diameter:"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:443
msgid "Enter the diameter of your filament."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:444
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:447
msgid "Filament Diameter:"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:465
msgid "Extruder and Bed Temperatures"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:465
msgid "Temperatures"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:481
msgid "Enter the temperature needed for extruding your filament."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:482
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:485
msgid "Extrusion Temperature:"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:486
#: xs/src/slic3r/GUI/ConfigWizard.cpp:500
msgid "°C"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:495
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:496
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:499
msgid "Bed Temperature:"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:807
msgid "&Finish"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:865
msgid "Configuration Wizard"
msgstr ""

#: xs/src/slic3r/GUI/ConfigWizard.cpp:867
msgid "Configuration Assistant"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:206
msgid "Array of language names and identifiers should have the same size."
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:217
msgid "Select the language"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:217
msgid "Language"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:279 xs/src/libslic3r/PrintConfig.cpp:187
msgid "Default"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:319
msgid "Inspect / activate configuration snapshots"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:320
msgid "Take Configuration Snapshot"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:320
msgid "Capture a configuration snapshot"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:323 xs/src/slic3r/GUI/Preferences.cpp:9
msgid "Preferences"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:323
msgid "Application preferences"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:324
msgid "Change Application Language"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:326
msgid "Flash printer firmware"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:326
msgid "Upload a firmware image into an Arduino based printer"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:338
msgid "Taking configuration snapshot"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:338
msgid "Snapshot name"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:377
msgid "Application will be restarted"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:377
msgid "Attention!"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:392
msgid "&Configuration"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:416
msgid "You have unsaved changes "
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:416
msgid ". Discard changes and continue anyway?"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:417
msgid "Unsaved Presets"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:619
msgid "Notice"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:624
msgid "Attempt to free unreferenced scalar"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:626 xs/src/slic3r/GUI/WipeTowerDialog.cpp:44
#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:326
msgid "Warning"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:815
msgid "Support"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:818
msgid "Select what kind of support do you need"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:819 xs/src/libslic3r/GCode/PreviewData.cpp:157
msgid "None"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:820 xs/src/libslic3r/PrintConfig.cpp:1516
msgid "Support on build plate only"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:821
msgid "Everywhere"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:833 xs/src/slic3r/GUI/Tab.cpp:870
msgid "Brim"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:835
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:844
msgid "Purging volumes"
msgstr ""

#: xs/src/slic3r/GUI/GUI.cpp:886
msgid "Export print config"
msgstr ""

#: xs/src/slic3r/GUI/MsgDialog.cpp:64
msgid "Slic3r error"
msgstr ""

#: xs/src/slic3r/GUI/MsgDialog.cpp:64
msgid "Slic3r has encountered an error"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:101
msgid "Save current "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:102
msgid "Delete this preset"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:114
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:742
msgid "It's a default preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:743
msgid "It's a system preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:744
msgid "Current preset is inherited from "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:749
msgid "It can't be deleted or modified. "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:750
msgid ""
"Any modifications should be saved as a new preset inherited from this one. "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:751
msgid "To do that please specify a new name for the preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:755
msgid "Additional information:"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:763
msgid "printer model"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:765
msgid "default print profile"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:768
msgid "default filament profile"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:812
msgid "Layers and perimeters"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:813 xs/src/libslic3r/PrintConfig.cpp:847
msgid "Layer height"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:817
msgid "Vertical shells"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:828
msgid "Horizontal shells"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:829 xs/src/libslic3r/PrintConfig.cpp:1422
msgid "Solid layers"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:834
msgid "Quality (slower slicing)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:841 xs/src/slic3r/GUI/Tab.cpp:855
#: xs/src/slic3r/GUI/Tab.cpp:949 xs/src/slic3r/GUI/Tab.cpp:952
#: xs/src/slic3r/GUI/Tab.cpp:1301 xs/src/slic3r/GUI/Tab.cpp:1629
#: xs/src/libslic3r/PrintConfig.cpp:107 xs/src/libslic3r/PrintConfig.cpp:237
#: xs/src/libslic3r/PrintConfig.cpp:799 xs/src/libslic3r/PrintConfig.cpp:1863
msgid "Advanced"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:845 xs/src/slic3r/GUI/Tab.cpp:846
#: xs/src/slic3r/GUI/Tab.cpp:1153 xs/src/libslic3r/PrintConfig.cpp:87
#: xs/src/libslic3r/PrintConfig.cpp:276 xs/src/libslic3r/PrintConfig.cpp:551
#: xs/src/libslic3r/PrintConfig.cpp:565 xs/src/libslic3r/PrintConfig.cpp:603
#: xs/src/libslic3r/PrintConfig.cpp:744 xs/src/libslic3r/PrintConfig.cpp:754
#: xs/src/libslic3r/PrintConfig.cpp:772 xs/src/libslic3r/PrintConfig.cpp:790
#: xs/src/libslic3r/PrintConfig.cpp:809 xs/src/libslic3r/PrintConfig.cpp:1371
#: xs/src/libslic3r/PrintConfig.cpp:1388
msgid "Infill"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:851
msgid "Reducing printing time"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:863
msgid "Skirt and brim"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:864 xs/src/libslic3r/GCode/PreviewData.cpp:166
#: lib/Slic3r/GUI/Plater/3DPreview.pm:98
msgid "Skirt"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:873 xs/src/slic3r/GUI/Tab.cpp:874
#: xs/src/libslic3r/PrintConfig.cpp:220 xs/src/libslic3r/PrintConfig.cpp:1138
#: xs/src/libslic3r/PrintConfig.cpp:1488 xs/src/libslic3r/PrintConfig.cpp:1495
#: xs/src/libslic3r/PrintConfig.cpp:1507 xs/src/libslic3r/PrintConfig.cpp:1517
#: xs/src/libslic3r/PrintConfig.cpp:1525 xs/src/libslic3r/PrintConfig.cpp:1540
#: xs/src/libslic3r/PrintConfig.cpp:1561 xs/src/libslic3r/PrintConfig.cpp:1572
#: xs/src/libslic3r/PrintConfig.cpp:1588 xs/src/libslic3r/PrintConfig.cpp:1597
#: xs/src/libslic3r/PrintConfig.cpp:1606 xs/src/libslic3r/PrintConfig.cpp:1617
#: xs/src/libslic3r/PrintConfig.cpp:1631 xs/src/libslic3r/PrintConfig.cpp:1639
#: xs/src/libslic3r/PrintConfig.cpp:1640 xs/src/libslic3r/PrintConfig.cpp:1649
#: xs/src/libslic3r/PrintConfig.cpp:1657 xs/src/libslic3r/PrintConfig.cpp:1671
#: xs/src/libslic3r/GCode/PreviewData.cpp:167
#: lib/Slic3r/GUI/Plater/3DPreview.pm:99
msgid "Support material"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:879
msgid "Raft"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:883
msgid "Options for support material and raft"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:897 xs/src/libslic3r/PrintConfig.cpp:119
#: xs/src/libslic3r/PrintConfig.cpp:307 xs/src/libslic3r/PrintConfig.cpp:698
#: xs/src/libslic3r/PrintConfig.cpp:810 xs/src/libslic3r/PrintConfig.cpp:1072
#: xs/src/libslic3r/PrintConfig.cpp:1309 xs/src/libslic3r/PrintConfig.cpp:1359
#: xs/src/libslic3r/PrintConfig.cpp:1410 xs/src/libslic3r/PrintConfig.cpp:1731
#: lib/Slic3r/GUI/Plater/3DPreview.pm:77
msgid "Speed"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:898
msgid "Speed for print moves"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:910
msgid "Speed for non-print moves"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:913
msgid "Modifiers"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:916
msgid "Acceleration control (advanced)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:923
msgid "Autospeed (advanced)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:929
msgid "Multiple Extruders"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:930 xs/src/slic3r/GUI/Tab.cpp:1471
#: xs/src/libslic3r/PrintConfig.cpp:337 xs/src/libslic3r/PrintConfig.cpp:765
#: xs/src/libslic3r/PrintConfig.cpp:1051 xs/src/libslic3r/PrintConfig.cpp:1380
#: xs/src/libslic3r/PrintConfig.cpp:1553 xs/src/libslic3r/PrintConfig.cpp:1579
msgid "Extruders"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:937
msgid "Ooze prevention"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:941 xs/src/libslic3r/GCode/PreviewData.cpp:169
#: lib/Slic3r/GUI/Plater/3DPreview.pm:101
msgid "Wipe tower"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:953
msgid "Extrusion width"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:963
msgid "Overlap"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:966
msgid "Flow"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:969
msgid "Other"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:976
msgid "Output options"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:977
msgid "Sequential printing"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:979
msgid "Extruder clearance (mm)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:988
msgid "Output file"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:994 xs/src/libslic3r/PrintConfig.cpp:1094
msgid "Post-processing scripts"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1000 xs/src/slic3r/GUI/Tab.cpp:1001
#: xs/src/slic3r/GUI/Tab.cpp:1350 xs/src/slic3r/GUI/Tab.cpp:1351
#: xs/src/slic3r/GUI/Tab.cpp:1672 xs/src/slic3r/GUI/Tab.cpp:1673
msgid "Notes"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1007 xs/src/slic3r/GUI/Tab.cpp:1358
#: xs/src/slic3r/GUI/Tab.cpp:1679
msgid "Dependencies"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1008 xs/src/slic3r/GUI/Tab.cpp:1359
#: xs/src/slic3r/GUI/Tab.cpp:1680
msgid "Profile dependencies"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1009 xs/src/slic3r/GUI/Tab.cpp:1360
#: xs/src/slic3r/GUI/Tab.cpp:2246 xs/src/libslic3r/PrintConfig.cpp:144
msgid "Compatible printers"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1042
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- no ensure_vertical_shell_thickness\n"
"\n"
"Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1049
msgid "Spiral Vase"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1070
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0).\n"
"\n"
"Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1074 xs/src/slic3r/GUI/Tab.cpp:1091
msgid "Wipe Tower"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1088
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers.\n"
"\n"
"Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1106
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters\n"
"\n"
"Shall I adjust those settings for supports?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1109
msgid "Support Generator"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1151
msgid "The "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1151
#, no-c-format
msgid ""
" infill pattern is not supposed to work at 100% density.\n"
"\n"
"Shall I switch to rectilinear fill pattern?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1256 xs/src/slic3r/GUI/Tab.cpp:1257
#: lib/Slic3r/GUI/Plater.pm:388
msgid "Filament"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1264
msgid "Temperature "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1265 xs/src/libslic3r/PrintConfig.cpp:336
msgid "Extruder"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1270
msgid "Bed"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1275
msgid "Cooling"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1276 xs/src/libslic3r/PrintConfig.cpp:1006
#: xs/src/libslic3r/PrintConfig.cpp:1801
msgid "Enable"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1287
msgid "Fan settings"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1288
msgid "Fan speed"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1296
msgid "Cooling thresholds"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1302
msgid "Filament properties"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1306
msgid "Print speed override"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1316
msgid "Toolchange parameters with single extruder MM printers"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1320
msgid "Ramming"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1322
msgid "Ramming settings"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1337 xs/src/slic3r/GUI/Tab.cpp:1635
msgid "Custom G-code"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1338 xs/src/slic3r/GUI/Tab.cpp:1636
#: xs/src/libslic3r/PrintConfig.cpp:1450 xs/src/libslic3r/PrintConfig.cpp:1465
msgid "Start G-code"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1344 xs/src/slic3r/GUI/Tab.cpp:1642
#: xs/src/libslic3r/PrintConfig.cpp:246 xs/src/libslic3r/PrintConfig.cpp:256
msgid "End G-code"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1439 xs/src/slic3r/GUI/Preferences.cpp:17
msgid "General"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1440
msgid "Size and coordinates"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1442 xs/src/libslic3r/PrintConfig.cpp:34
msgid "Bed shape"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1444 xs/src/slic3r/GUI/Tab.cpp:2214
msgid " Set "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1467
msgid "Capabilities"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1472
msgid "Number of extruders of the printer."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1497
msgid "USB/Serial connection"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1498 xs/src/libslic3r/PrintConfig.cpp:1301
msgid "Serial port"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1503
msgid "Rescan serial ports"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1512 xs/src/slic3r/GUI/Tab.cpp:1559
msgid "Test"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1525
msgid "Connection to printer works correctly."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1525 xs/src/slic3r/GUI/Tab.cpp:1569
msgid "Success!"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1528
msgid "Connection failed."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1540 xs/src/slic3r/Utils/OctoPrint.cpp:50
msgid "OctoPrint upload"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1543 xs/src/slic3r/GUI/Tab.cpp:1592
msgid " Browse "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1569
msgid "Connection to OctoPrint works correctly."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1572
msgid "Could not connect to OctoPrint"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1572
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1598
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1599
msgid "Open CA certificate file"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1613
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1648 xs/src/libslic3r/PrintConfig.cpp:48
msgid "Before layer change G-code"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1654 xs/src/libslic3r/PrintConfig.cpp:836
msgid "After layer change G-code"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1660 xs/src/libslic3r/PrintConfig.cpp:1708
msgid "Tool change G-code"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1666
msgid "Between objects G-code (for sequential printing)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1718 xs/src/slic3r/GUI/Tab.cpp:1726
msgid "Single extruder MM setup"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1727
msgid "Single extruder multimaterial parameters"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1739 xs/src/libslic3r/GCode/PreviewData.cpp:440
#, possible-c-format
msgid "Extruder %d"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1746
msgid "Layer height limits"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1751
msgid "Position (for multi-extruder printers)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1754
msgid "Retraction"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1757
msgid "Only lift Z"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1770
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1774 lib/Slic3r/GUI/Plater.pm:160
#: lib/Slic3r/GUI/Plater.pm:2189
msgid "Preview"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1853
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:1855
msgid "Firmware Retraction"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2027
msgid "Default "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2027
msgid " preset"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2028
msgid " preset\n"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2046
msgid ""
"\n"
"\n"
"is not compatible with printer\n"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2046
msgid ""
"\n"
"\n"
"and it has the following unsaved changes:"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2047
msgid ""
"\n"
"\n"
"has the following unsaved changes:"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2049
msgid ""
"\n"
"\n"
"Discard changes and continue anyway?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2050
msgid "Unsaved Changes"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2124
msgid "The supplied name is empty. It can't be saved."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2129
msgid "Cannot overwrite a system profile."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2133
msgid "Cannot overwrite an external profile."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2157
msgid "remove"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2157
msgid "delete"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2158
msgid "Are you sure you want to "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2158
msgid " the selected preset?"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2159
msgid "Remove"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2159 lib/Slic3r/GUI/Plater.pm:188
#: lib/Slic3r/GUI/Plater.pm:206 lib/Slic3r/GUI/Plater.pm:2085
msgid "Delete"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2160
msgid " Preset"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2213
msgid "All"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2245
msgid "Select the printers this profile is compatible with."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2291 xs/src/slic3r/GUI/Tab.cpp:2377
#: xs/src/slic3r/GUI/Preset.cpp:613 xs/src/slic3r/GUI/Preset.cpp:653
#: xs/src/slic3r/GUI/Preset.cpp:678 xs/src/slic3r/GUI/Preset.cpp:710
#: xs/src/slic3r/GUI/PresetBundle.cpp:1122
#: xs/src/slic3r/GUI/PresetBundle.cpp:1175 lib/Slic3r/GUI/Plater.pm:573
msgid "System presets"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2292 xs/src/slic3r/GUI/Tab.cpp:2378
msgid "Default presets"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2447
msgid ""
"LOCKED LOCK;indicates that the settings are the same as the system values "
"for the current option group"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2450
msgid ""
"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
"the system values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system values."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2456
msgid ""
"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2460
msgid ""
"BACK ARROW;indicates that the settings were changed and are not equal to the "
"last saved preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2486
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system "
"values for the current option group"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2488
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system values for the current option group.\n"
"Click to reset all settings for current option group to the system values."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2491
msgid "WHITE BULLET icon indicates a non system preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2494
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2496
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2502
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system value."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2503
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system value.\n"
"Click to reset current value to the system value."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2509
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2510
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2580 lib/Slic3r/GUI/MainFrame.pm:448
#: lib/Slic3r/GUI/Plater.pm:1685
msgid "Save "
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2580
msgid " as:"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2614
msgid ""
"The supplied name is not valid; the following characters are not allowed:"
msgstr ""

#: xs/src/slic3r/GUI/Tab.cpp:2617
msgid "The supplied name is not available."
msgstr ""

#: xs/src/slic3r/GUI/Tab.hpp:283
msgid "Print Settings"
msgstr ""

#: xs/src/slic3r/GUI/Tab.hpp:303
msgid "Filament Settings"
msgstr ""

#: xs/src/slic3r/GUI/Tab.hpp:326
msgid "Printer Settings"
msgstr ""

#: xs/src/slic3r/GUI/Tab.hpp:341
msgid "Save preset"
msgstr ""

#: xs/src/slic3r/GUI/Field.cpp:72
msgid "default"
msgstr ""

#: xs/src/slic3r/GUI/Field.cpp:102
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr ""

#: xs/src/slic3r/GUI/Field.cpp:111
msgid "Input value is out of range"
msgstr ""

#: xs/src/slic3r/GUI/Preset.cpp:657 xs/src/slic3r/GUI/Preset.cpp:714
#: xs/src/slic3r/GUI/PresetBundle.cpp:1180 lib/Slic3r/GUI/Plater.pm:574
msgid "User presets"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:27
#, possible-c-format
msgid ""
"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
"will be reduced so that no less than %ds are spent on that layer (however, "
"speed will never be reduced below %dmm/s)."
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:31
#, possible-c-format
msgid ""
"\n"
"If estimated layer time is greater, but still below ~%ds, fan will run at a "
"proportionally decreasing speed between %d%% and %d%%."
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:35
msgid ""
"\n"
"During the other layers, fan "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:37
msgid "Fan "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:42
#, possible-c-format
msgid "will always run at %d%% "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:45
#, possible-c-format
msgid "except for the first %d layers"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:49
msgid "except for the first layer"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:51
msgid "will be turned off."
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:152
msgid "external perimeters"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:161
msgid "perimeters"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:170
msgid "infill"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:180
msgid "solid infill"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:188
msgid "top solid infill"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:199
msgid "support"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:209
msgid "support interface"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:215
msgid "First layer volumetric"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:215
msgid "Bridging volumetric"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:215
msgid "Volumetric"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:216
msgid " flow rate is maximized "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:219
msgid "by the print profile maximum"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:220
msgid "when printing "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:221
msgid " with a volumetric rate "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:225
#, possible-c-format
msgid "%3.2f mm³/s"
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:227
#, possible-c-format
msgid " at filament speed %3.2f mm/s."
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:246
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:263
#, possible-c-format
msgid "Recommended object thin wall thickness for layer height %.2f and "
msgstr ""

#: xs/src/slic3r/GUI/PresetHints.cpp:270
#, possible-c-format
msgid "%d lines: %.2lf mm"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:34
msgid "Remember output directory"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:36
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:42
msgid "Auto-center parts"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:44
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:50
msgid "Background processing"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:52
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:74
msgid "Disable USB/serial connection"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:76
msgid ""
"Disable communication with the printer over a serial / USB cable. This "
"simplifies the user interface in case the printer is never attached to the "
"computer."
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:82
msgid "Suppress \" - default - \" presets"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:84
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:90
msgid "Show incompatible print and filament presets"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:92
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:98
msgid "Use legacy OpenGL 1.1 rendering"
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:100
msgid ""
"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
"try to check this checkbox. This will disable the layer height editing and "
"anti aliasing, so it is likely better to upgrade your graphics driver."
msgstr ""

#: xs/src/slic3r/GUI/Preferences.cpp:124
msgid "You need to restart Slic3r to make the changes effective."
msgstr ""

#: xs/src/slic3r/GUI/RammingChart.cpp:28
msgid "NO RAMMING AT ALL"
msgstr ""

#: xs/src/slic3r/GUI/RammingChart.cpp:81
msgid "Time"
msgstr ""

#: xs/src/slic3r/GUI/RammingChart.cpp:81 xs/src/slic3r/GUI/RammingChart.cpp:86
#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:82
#: xs/src/libslic3r/PrintConfig.cpp:481
msgid "s"
msgstr ""

#: xs/src/slic3r/GUI/RammingChart.cpp:86
msgid "Volumetric speed"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:27
msgid "Update available"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:27
msgid "New version of Slic3r PE is available"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:34
msgid "To download, follow the link below."
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:41
msgid "Current version:"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "New version:"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:51
msgid "Don't notify about new releases any more"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:69
#: xs/src/slic3r/GUI/UpdateDialogs.cpp:161
msgid "Configuration update"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:69
msgid "Configuration update is available"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:72
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:108
msgid "Slic3r incompatibility"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:108
msgid "Slic3r configuration is incompatible"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:111
msgid ""
"This version of Slic3r PE is not compatible with currently installed "
"configuration bundles.\n"
"This probably happened as a result of running an older Slic3r PE after using "
"a newer one.\n"
"\n"
"You may either exit Slic3r and try again with a newer version, or you may re-"
"run the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this Slic3r.\n"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:120
#, possible-c-format
msgid "This Slic3r PE version: %s"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:125
msgid "Incompatible bundles:"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:141
msgid "Exit Slic3r"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:144
msgid "Re-configure"
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:165
#, possible-c-format
msgid ""
"Slic3r PE now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""

#: xs/src/slic3r/GUI/UpdateDialogs.cpp:181
msgid "For more information please visit our wiki page:"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:14
msgid "Ramming customization"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:40
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:82
msgid "Total ramming time"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:84
msgid "Total rammed volume"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:88
msgid "Ramming line width"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:90
msgid "Ramming line spacing"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:223
#, possible-c-format
msgid ""
"Here you can adjust required purging volume (mm%s) for any given pair of "
"tools."
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:224
msgid "Extruder changed to"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:232
msgid "unloaded"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:233
msgid "loaded"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:238
msgid "Tool #"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:245
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:246
#, possible-c-format
msgid "Volume to purge (mm%s) when the filament is being"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:260
msgid "From"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:325
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:337
msgid "Show simplified settings"
msgstr ""

#: xs/src/slic3r/GUI/WipeTowerDialog.cpp:337
msgid "Show advanced settings"
msgstr ""

#: xs/src/slic3r/Utils/OctoPrint.cpp:47
msgid "Error while uploading to the OctoPrint server"
msgstr ""

#: xs/src/slic3r/Utils/OctoPrint.cpp:51 lib/Slic3r/GUI/Plater.pm:1516
msgid "Sending G-code file to the OctoPrint server..."
msgstr ""

#: xs/src/slic3r/Utils/OctoPrint.cpp:120
msgid "Invalid API key"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:26
msgid "Avoid crossing perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:27
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:38 xs/src/libslic3r/PrintConfig.cpp:1678
msgid "Other layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:39
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:42
msgid "Bed temperature"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:49
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:59
msgid "Between objects G-code"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:60
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 S"
"[first_layer_temperature]\" command wherever you want."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:68 lib/Slic3r/GUI/MainFrame.pm:307
msgid "Bottom"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:69 xs/src/libslic3r/PrintConfig.cpp:268
#: xs/src/libslic3r/PrintConfig.cpp:319 xs/src/libslic3r/PrintConfig.cpp:327
#: xs/src/libslic3r/PrintConfig.cpp:667 xs/src/libslic3r/PrintConfig.cpp:832
#: xs/src/libslic3r/PrintConfig.cpp:848 xs/src/libslic3r/PrintConfig.cpp:1025
#: xs/src/libslic3r/PrintConfig.cpp:1082 xs/src/libslic3r/PrintConfig.cpp:1260
#: xs/src/libslic3r/PrintConfig.cpp:1689 xs/src/libslic3r/PrintConfig.cpp:1745
msgid "Layers and Perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:70
msgid "Number of solid layers to generate on bottom surfaces."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:72
msgid "Bottom solid layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:77
msgid "Bridge"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:78
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:80 xs/src/libslic3r/PrintConfig.cpp:191
#: xs/src/libslic3r/PrintConfig.cpp:639 xs/src/libslic3r/PrintConfig.cpp:747
#: xs/src/libslic3r/PrintConfig.cpp:1045
msgid "mm/s²"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:86
msgid "Bridging angle"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:88
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:91 xs/src/libslic3r/PrintConfig.cpp:555
#: xs/src/libslic3r/PrintConfig.cpp:1278 xs/src/libslic3r/PrintConfig.cpp:1289
#: xs/src/libslic3r/PrintConfig.cpp:1509 xs/src/libslic3r/PrintConfig.cpp:1663
msgid "°"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:97
msgid "Bridges fan speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:98
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:99 xs/src/libslic3r/PrintConfig.cpp:567
#: xs/src/libslic3r/PrintConfig.cpp:859 xs/src/libslic3r/PrintConfig.cpp:927
#: xs/src/libslic3r/PrintConfig.cpp:1168
msgid "%"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:106
msgid "Bridge flow ratio"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:108
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:118
msgid "Bridges"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:120
msgid "Speed for printing bridges."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:121 xs/src/libslic3r/PrintConfig.cpp:462
#: xs/src/libslic3r/PrintConfig.cpp:471 xs/src/libslic3r/PrintConfig.cpp:701
#: xs/src/libslic3r/PrintConfig.cpp:812 xs/src/libslic3r/PrintConfig.cpp:888
#: xs/src/libslic3r/PrintConfig.cpp:945 xs/src/libslic3r/PrintConfig.cpp:1074
#: xs/src/libslic3r/PrintConfig.cpp:1245 xs/src/libslic3r/PrintConfig.cpp:1254
#: xs/src/libslic3r/PrintConfig.cpp:1642 xs/src/libslic3r/PrintConfig.cpp:1755
msgid "mm/s"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:128
msgid "Brim width"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:129
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:136
msgid "Clip multi-part objects"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:137
msgid ""
"When printing multi-material objects, this settings will make slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:148
msgid "Compatible printers condition"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:149
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:155
msgid "Complete individual objects"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:156
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:164
msgid "Enable auto cooling"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:165
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:171
msgid "Cooling tube position"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:172
msgid "Distance of the center-point of the cooling tube from the extruder tip "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:179
msgid "Cooling tube length"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:180
msgid "Length of the cooling tube to limit space for cooling moves inside it "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:188
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:197
msgid "Default filament profile"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:198
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:203
msgid "Default print profile"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:204
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:209
msgid "Disable fan for the first"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:210
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:212 xs/src/libslic3r/PrintConfig.cpp:757
#: xs/src/libslic3r/PrintConfig.cpp:1141 xs/src/libslic3r/PrintConfig.cpp:1332
#: xs/src/libslic3r/PrintConfig.cpp:1393 xs/src/libslic3r/PrintConfig.cpp:1545
#: xs/src/libslic3r/PrintConfig.cpp:1590
msgid "layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:219
msgid "Don't support bridges"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:221
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:227
msgid "Distance between copies"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:228
msgid "Distance used for the auto-arrange feature of the plater."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:236
msgid "Elephant foot compensation"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:238
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:247
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all Slic3r settings."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:257
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode. Note that you can use placeholder variables for all "
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
"extruder order."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:267
msgid "Ensure vertical shell thickness"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:269
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:275
msgid "Top/bottom fill pattern"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:277
msgid ""
"Fill pattern for top/bottom infill. This only affects the external visible "
"layer, and not its adjacent solid shells."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:296 xs/src/libslic3r/PrintConfig.cpp:306
msgid "External perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:297 xs/src/libslic3r/PrintConfig.cpp:406
#: xs/src/libslic3r/PrintConfig.cpp:655 xs/src/libslic3r/PrintConfig.cpp:773
#: xs/src/libslic3r/PrintConfig.cpp:1060 xs/src/libslic3r/PrintConfig.cpp:1400
#: xs/src/libslic3r/PrintConfig.cpp:1562 xs/src/libslic3r/PrintConfig.cpp:1720
msgid "Extrusion Width"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:298
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:301 xs/src/libslic3r/PrintConfig.cpp:660
#: xs/src/libslic3r/PrintConfig.cpp:778 xs/src/libslic3r/PrintConfig.cpp:1065
#: xs/src/libslic3r/PrintConfig.cpp:1404 xs/src/libslic3r/PrintConfig.cpp:1566
#: xs/src/libslic3r/PrintConfig.cpp:1725
msgid "mm or % (leave 0 for default)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:308
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:311 xs/src/libslic3r/PrintConfig.cpp:682
#: xs/src/libslic3r/PrintConfig.cpp:1363 xs/src/libslic3r/PrintConfig.cpp:1414
#: xs/src/libslic3r/PrintConfig.cpp:1609 xs/src/libslic3r/PrintConfig.cpp:1737
msgid "mm/s or %"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:318
msgid "External perimeters first"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:320
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:326
msgid "Extra perimeters if needed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:328
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:338
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:349 lib/Slic3r/GUI/Plater/3DPreview.pm:75
msgid "Height"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:350
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:360
msgid "Radius"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:361
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:371
msgid "Extruder Color"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:372 xs/src/libslic3r/PrintConfig.cpp:435
msgid "This is only used in the Slic3r interface as a visual help."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:379
msgid "Extruder offset"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:380
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:389
msgid "Extrusion axis"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:390
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:396
msgid "Extrusion multiplier"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:397
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:405
msgid "Default extrusion width"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:407
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:411
msgid "mm or % (leave 0 for auto)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:416
msgid "Keep fan always on"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:417
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:423
msgid "Enable fan if layer print time is below"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:424
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:426 xs/src/libslic3r/PrintConfig.cpp:1350
msgid "approximate seconds"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:434
msgid "Color"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:441
msgid "Filament notes"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:442
msgid "You can put your notes regarding the filament here."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:450 xs/src/libslic3r/PrintConfig.cpp:894
msgid "Max volumetric speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:451
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:454 xs/src/libslic3r/PrintConfig.cpp:897
msgid "mm³/s"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:460
msgid "Loading speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:461
msgid "Speed used for loading the filament on the wipe tower. "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:468
msgid "Unloading speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:469
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming). "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:477
msgid "Delay after unloading"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:478
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:487
msgid "Ramming parameters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:488
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:495
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:503
msgid "Density"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:504
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:507
msgid "g/cm³"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:513
msgid "Filament type"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:514 xs/src/libslic3r/PrintConfig.cpp:1095
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:533
msgid "Soluble material"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:534
msgid "Soluble material is most likely used for a soluble support."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:539 lib/Slic3r/GUI/Plater.pm:474
msgid "Cost"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:540
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:541
msgid "money/kg"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:550
msgid "Fill angle"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:552
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:564
msgid "Fill density"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:566
#, no-c-format
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:602
msgid "Fill pattern"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:604
msgid "Fill pattern for general low-density infill."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:636 xs/src/libslic3r/PrintConfig.cpp:645
#: xs/src/libslic3r/PrintConfig.cpp:654 xs/src/libslic3r/PrintConfig.cpp:688
msgid "First layer"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:637
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:646
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:656
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:666
msgid "First layer height"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:668
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:672 xs/src/libslic3r/PrintConfig.cpp:803
#: xs/src/libslic3r/PrintConfig.cpp:1498
msgid "mm or %"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:678
msgid "First layer speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:679
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:689
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:697
#: xs/src/libslic3r/GCode/PreviewData.cpp:165
#: lib/Slic3r/GUI/Plater/3DPreview.pm:97
msgid "Gap fill"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:699
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:707
msgid "Verbose G-code"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:708
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:715
msgid "G-code flavor"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:716
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
"extrusion value at all."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:745
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:753
msgid "Combine infill every"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:755
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:759
msgid "Combine infill every n layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:764
msgid "Infill extruder"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:766
msgid "The extruder to use when printing infill."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:774
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:783
msgid "Infill before perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:784
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:789
msgid "Only infill where needed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:791
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:798
msgid "Infill/perimeters overlap"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:800
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:811
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:820
msgid "Inherits profile"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:821
msgid "Name of the profile, from which this profile inherits."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:827
msgid "Interface shells"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:828
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:837
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:849
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:857 xs/src/libslic3r/PrintConfig.cpp:866
msgid "Max"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:858
msgid "This setting represents the maximum speed of your fan."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:867
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:877
msgid "Max print height"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:878
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:884
msgid "Max print speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:885
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:895
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:903
msgid "Max volumetric slope positive"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:904 xs/src/libslic3r/PrintConfig.cpp:915
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:908 xs/src/libslic3r/PrintConfig.cpp:919
msgid "mm³/s²"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:914
msgid "Max volumetric slope negative"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:925 xs/src/libslic3r/PrintConfig.cpp:934
msgid "Min"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:926
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:935
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:943
msgid "Min print speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:944
msgid "Slic3r will not scale speed down below this speed."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:951
msgid "Minimal filament extrusion length"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:952
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:961
msgid "Configuration notes"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:962
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:971
msgid "Nozzle diameter"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:972
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:978
msgid "API Key"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:979
msgid ""
"Slic3r can upload G-code files to OctoPrint. This field should contain the "
"API Key required for authentication."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:992
msgid "Hostname, IP or URL"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:993
msgid ""
"Slic3r can upload G-code files to OctoPrint. This field should contain the "
"hostname, IP address or URL of the OctoPrint instance."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:999
msgid "Only retract when crossing perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1000
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1007
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1014
msgid "Output filename format"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1015
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1024
msgid "Detect bridging perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1026
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1032
msgid "Filament parking position"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1033
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware. "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1041 xs/src/libslic3r/PrintConfig.cpp:1059
#: xs/src/libslic3r/PrintConfig.cpp:1071 xs/src/libslic3r/PrintConfig.cpp:1081
msgid "Perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1042
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1050
msgid "Perimeter extruder"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1052
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1061
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1073
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1083
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1087
msgid "(minimum)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1107
msgid "Printer type"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1108
msgid "Type of the printer."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1112
msgid "Printer notes"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1113
msgid "You can put your notes regarding the printer here."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1121
msgid "Printer vendor"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1122
msgid "Name of the printer vendor."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1126
msgid "Printer variant"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1127
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1137
msgid "Raft layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1139
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1147
msgid "Resolution"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1148
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1158
msgid "Minimum travel after retraction"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1159
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1165
msgid "Retract amount before wipe"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1166
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1173
msgid "Retract on layer change"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1174
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1179 xs/src/libslic3r/PrintConfig.cpp:1188
msgid "Length"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1180
msgid "Retraction Length"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1181
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1183 xs/src/libslic3r/PrintConfig.cpp:1193
msgid "mm (zero to disable)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1189
msgid "Retraction Length (Toolchange)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1190
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1198
msgid "Lift Z"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1199
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1207
msgid "Above Z"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1208
msgid "Only lift Z above"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1209
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1216
msgid "Below Z"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1217
msgid "Only lift Z below"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1218
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1226 xs/src/libslic3r/PrintConfig.cpp:1234
msgid "Extra length on restart"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1227
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1235
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1242 xs/src/libslic3r/PrintConfig.cpp:1243
msgid "Retraction Speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1244
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1250 xs/src/libslic3r/PrintConfig.cpp:1251
msgid "Deretraction Speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1252
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1259
msgid "Seam position"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1261
msgid "Position of perimeters starting points."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1277
msgid "Direction"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1279
msgid "Preferred direction of the seam"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1280
msgid "Seam preferred direction"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1288
msgid "Jitter"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1290
msgid "Seam preferred direction jitter"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1291
msgid "Preferred direction of the seam - jitter"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1302
msgid "USB/serial port for printer connection."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1310
msgid "Serial port speed"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1311
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1320
msgid "Distance from object"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1321
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1329
msgid "Skirt height"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1330
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1337
msgid "Loops (minimum)"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1338
msgid "Skirt Loops"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1339
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1347
msgid "Slow down if layer print time is below"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1348
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1358
msgid "Small perimeters"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1360
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1370
msgid "Solid infill threshold area"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1372
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1373
msgid "mm²"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1379
msgid "Solid infill extruder"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1381
msgid "The extruder to use when printing solid infill."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1387
msgid "Solid infill every"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1389
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1399 xs/src/libslic3r/PrintConfig.cpp:1409
#: xs/src/libslic3r/GCode/PreviewData.cpp:162
#: lib/Slic3r/GUI/Plater/3DPreview.pm:94
msgid "Solid infill"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1401
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1411
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1423
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1430
msgid "Spiral vase"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1431
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1440
msgid "Temperature variation"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1441
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1451
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
"such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all Slic3r settings, so you can put a "
"\"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1466
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode. This is used to override settings for a specific filament. If Slic3r "
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
"not be prepended automatically so you're free to customize the order of "
"heating commands and other custom actions. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 S"
"[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1481
msgid "Single Extruder Multi Material"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1482
msgid "The printer multiplexes filaments into a single hot end."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1487
msgid "Generate support material"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1489
msgid "Enable support material generation."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1494
msgid "XY separation between an object and its support"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1496
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1506
msgid "Pattern angle"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1508
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1518
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1524
msgid "Contact Z distance"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1526
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1539
msgid "Enforce support for the first"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1541
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1547
msgid "Enforce support for the first n layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1552
msgid "Support material/raft/skirt extruder"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1554
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1563
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1571
msgid "Interface loops"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1573
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1578
msgid "Support material/raft interface extruder"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1580
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1587
msgid "Interface layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1589
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1596
msgid "Interface pattern spacing"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1598
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1605
#: xs/src/libslic3r/GCode/PreviewData.cpp:168
#: lib/Slic3r/GUI/Plater/3DPreview.pm:100
msgid "Support material interface"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1607
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1616
msgid "Pattern"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1618
msgid "Pattern used to generate support material."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1630
msgid "Pattern spacing"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1632
msgid "Spacing between support material lines."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1641
msgid "Speed for printing support material."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1648
msgid "Synchronize with object layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1650
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1656
msgid "Overhang threshold"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1658
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1670
msgid "With sheath around the support"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1672
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1679
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1682
msgid "Temperature"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1688
msgid "Detect thin walls"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1690
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1696
msgid "Threads"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1697
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1709
msgid ""
"This custom code is inserted right before every extruder change. Note that "
"you can use placeholder variables for all Slic3r settings as well as "
"[previous_extruder] and [next_extruder]."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1719 xs/src/libslic3r/PrintConfig.cpp:1730
#: xs/src/libslic3r/GCode/PreviewData.cpp:163
#: lib/Slic3r/GUI/Plater/3DPreview.pm:95
msgid "Top solid infill"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1721
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1732
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1744 lib/Slic3r/GUI/MainFrame.pm:306
msgid "Top"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1746
msgid "Number of solid layers to generate on top surfaces."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1748
msgid "Top solid layers"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1753
#: lib/Slic3r/GUI/Plater/3DPreview.pm:105
msgid "Travel"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1754
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1762
msgid "Use firmware retraction"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1763
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1769
msgid "Use relative E distances"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1770
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1776
msgid "Use volumetric E"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1777
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1787
msgid "Enable variable layer height feature"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1788
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1794
msgid "Wipe while retracting"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1795
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1802
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1808
msgid "Purging volumes - load/unload volumes"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1809
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below. "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1816
msgid "Purging volumes - matrix"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1817
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1827
msgid "Position X"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1828
msgid "X coordinate of the left front corner of a wipe tower"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1834
msgid "Position Y"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1835
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1841 lib/Slic3r/GUI/Plater/3DPreview.pm:76
msgid "Width"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1842
msgid "Width of a wipe tower"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1848
msgid "Wipe tower rotation angle"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1849
msgid "Wipe tower rotation angle with respect to x-axis "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1850
msgid "degrees"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1855
msgid "Maximal bridging distance"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1856
msgid "Maximal distance between supports on sparse infill sections. "
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1862
msgid "XY Size Compensation"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1864
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1872
msgid "Z offset"
msgstr ""

#: xs/src/libslic3r/PrintConfig.cpp:1873
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:158
#: lib/Slic3r/GUI/Plater/3DPreview.pm:90
msgid "Perimeter"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:159
#: lib/Slic3r/GUI/Plater/3DPreview.pm:91
msgid "External perimeter"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:160
#: lib/Slic3r/GUI/Plater/3DPreview.pm:92
msgid "Overhang perimeter"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:161
#: lib/Slic3r/GUI/Plater/3DPreview.pm:93
msgid "Internal infill"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:164
#: lib/Slic3r/GUI/Plater/3DPreview.pm:96
msgid "Bridge infill"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:171
msgid "Mixed"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:362
#: lib/Slic3r/GUI/Plater/3DPreview.pm:74
msgid "Feature type"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:364
msgid "Height (mm)"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:366
msgid "Width (mm)"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:368
msgid "Speed (mm/s)"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:370
msgid "Volumetric flow rate (mm3/s)"
msgstr ""

#: xs/src/libslic3r/GCode/PreviewData.cpp:372
#: lib/Slic3r/GUI/Plater/3DPreview.pm:79
msgid "Tool"
msgstr ""

#: lib/Slic3r/GUI.pm:303
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:62
msgid "Version "
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:62
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:114
msgid "Plater"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:116
msgid "Controller"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:194
msgid "Open STL/OBJ/AMF/3MF…\tCtrl+O"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:194
msgid "Open a model"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:197
msgid "&Load Config…\tCtrl+L"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:197
msgid "Load exported configuration file"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:200
msgid "&Export Config…\tCtrl+E"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:200
msgid "Export current configuration to file"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:203
msgid "&Load Config Bundle…"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:203
msgid "Load presets from a bundle"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:206
msgid "&Export Config Bundle…"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:206
msgid "Export all presets to file"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:211
msgid "Q&uick Slice…\tCtrl+U"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:211
msgid "Slice a file into a G-code"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:217
msgid "Quick Slice and Save &As…\tCtrl+Alt+U"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:217
msgid "Slice a file into a G-code, save as"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:223
msgid "&Repeat Last Quick Slice\tCtrl+Shift+U"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:223
msgid "Repeat last quick slice"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:230
msgid "Slice to SV&G…\tCtrl+G"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:230
msgid "Slice file to a multi-layer SVG"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:234
msgid "(&Re)Slice Now\tCtrl+S"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:234
msgid "Start new slicing process"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:237
msgid "Repair STL file…"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:237
msgid "Automatically repair an STL file"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:241
msgid "&Quit"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:241
msgid "Quit Slic3r"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:251
msgid "Export G-code..."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:251
msgid "Export current plate as G-code"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:254
msgid "Export plate as STL..."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:254
msgid "Export current plate as STL"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:257
msgid "Export plate as AMF..."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:257
msgid "Export current plate as AMF"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:260
msgid "Export plate as 3MF..."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:260
msgid "Export current plate as 3MF"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:273
msgid "Select &Plater Tab\tCtrl+1"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:273
msgid "Show the plater"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:279
msgid "Select &Controller Tab\tCtrl+T"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:279
msgid "Show the printer controller"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:287
msgid "Select P&rint Settings Tab\tCtrl+2"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:287
msgid "Show the print settings"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:290
msgid "Select &Filament Settings Tab\tCtrl+3"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:290
msgid "Show the filament settings"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:293
msgid "Select Print&er Settings Tab\tCtrl+4"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:293
msgid "Show the printer settings"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:305
msgid "Iso"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:305
msgid "Iso View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:306
msgid "Top View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:307
msgid "Bottom View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:308
msgid "Front"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:308
msgid "Front View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:309
msgid "Rear"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:309
msgid "Rear View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:310
msgid "Left"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:310
msgid "Left View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:311
msgid "Right"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:311
msgid "Right View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:317
msgid "Prusa 3D Drivers"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:317
msgid "Open the Prusa3D drivers download page in your browser"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:320
msgid "Prusa Edition Releases"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:320
msgid "Open the Prusa Edition releases page in your browser"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:327
msgid "Slic3r &Website"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:327
msgid "Open the Slic3r website in your browser"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:330
msgid "Slic3r &Manual"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:330
msgid "Open the Slic3r manual in your browser"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:334
msgid "System Info"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:334
msgid "Show system information"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:337
msgid "Show &Configuration Folder"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:337
msgid "Show user configuration folder (datadir)"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:340
msgid "Report an Issue"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:340
msgid "Report an issue on the Slic3r Prusa Edition"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:343
msgid "&About Slic3r"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:343
msgid "Show about dialog"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:353
msgid "&File"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:354
msgid "&Plater"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:355
msgid "&Object"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:356
msgid "&Window"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:357
msgid "&View"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:360
msgid "&Help"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:391
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:403
msgid "No previously sliced file."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:404 lib/Slic3r/GUI/Plater.pm:1363
msgid "Error"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:408
msgid "Previously sliced file ("
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:408
msgid ") not found."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:409
msgid "File Not Found"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:448
msgid "SVG"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:448
msgid "G-code"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:448 lib/Slic3r/GUI/Plater.pm:1685
msgid " file as:"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:462
msgid "Slicing…"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:462
msgid "Processing "
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:482
msgid " was successfully sliced."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:484
msgid "Slicing Done!"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:500
msgid "Select the STL file to repair:"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:514
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:528
msgid "Your file was repaired."
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:528
msgid "Repair"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:539
msgid "Save configuration as:"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:557 lib/Slic3r/GUI/MainFrame.pm:601
msgid "Select configuration to load:"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:580
msgid "Save presets bundle as:"
msgstr ""

#: lib/Slic3r/GUI/MainFrame.pm:621
#, possible-perl-format
msgid "%d presets successfully imported."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:112 lib/Slic3r/GUI/Plater.pm:2188
msgid "3D"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:148
msgid "2D"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:167
msgid "Layers"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:187 lib/Slic3r/GUI/Plater.pm:205
msgid "Add…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:189 lib/Slic3r/GUI/Plater.pm:207
msgid "Delete All"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:190 lib/Slic3r/GUI/Plater.pm:208
msgid "Arrange"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:192
msgid "More"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:193
msgid "Fewer"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:195
msgid "45° ccw"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:196
msgid "45° cw"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:197 lib/Slic3r/GUI/Plater.pm:213
msgid "Scale…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:198 lib/Slic3r/GUI/Plater.pm:214
#: lib/Slic3r/GUI/Plater.pm:2163
msgid "Split"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:199 lib/Slic3r/GUI/Plater.pm:215
#: lib/Slic3r/GUI/Plater.pm:2166
msgid "Cut…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:201 lib/Slic3r/GUI/Plater.pm:216
#: lib/Slic3r/GUI/Plater.pm:2170
msgid "Settings…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:202
msgid "Layer Editing"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:217
msgid "Layer editing"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:240
msgid "Name"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:241 lib/Slic3r/GUI/Plater.pm:963
msgid "Copies"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:242 lib/Slic3r/GUI/Plater.pm:1119
#: lib/Slic3r/GUI/Plater.pm:1124 lib/Slic3r/GUI/Plater.pm:2132
msgid "Scale"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:256
msgid "Export G-code…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:257
msgid "Slice now"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:258
msgid "Print…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:259
msgid "Send to printer"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:260
msgid "Export STL…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:387
msgid "Print settings"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:389
msgid "Printer"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:422
msgid "Info"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:433
msgid "Volume"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:434
msgid "Facets"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:435
msgid "Materials"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:436
msgid "Manifold"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:462
msgid "Sliced Info"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:471
msgid "Used Filament (m)"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:472
msgid "Used Filament (mm³)"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:473
msgid "Used Filament (g)"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:475
msgid "Estimated printing time"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:683
msgid "Loading…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:683 lib/Slic3r/GUI/Plater.pm:697
msgid "Processing input file\n"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:720
msgid ""
"This file contains several objects positioned at multiple heights. Instead "
"of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?\n"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:723 lib/Slic3r/GUI/Plater.pm:740
msgid "Multi-part object detected"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:737
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?\n"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:749
msgid "Loaded "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:807
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:808
msgid "Object too large?"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:963
msgid "Enter the number of copies of the selected object:"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:990
msgid ""
"\n"
"Non-positive value."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:991
msgid ""
"\n"
"Not a numeric value."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:992
msgid "Slic3r Error"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1013
msgid "Enter the rotation angle:"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1013
msgid "Rotate around "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1013
msgid "Invalid rotation angle entered"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1093
#, possible-perl-format
msgid "Enter the new size for the selected object (print bed: %smm):"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1094 lib/Slic3r/GUI/Plater.pm:1098
msgid "Scale along "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1094 lib/Slic3r/GUI/Plater.pm:1098
#: lib/Slic3r/GUI/Plater.pm:1119 lib/Slic3r/GUI/Plater.pm:1124
msgid "Invalid scaling value entered"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1098 lib/Slic3r/GUI/Plater.pm:1124
#, no-perl-format
msgid "Enter the scale % for the selected object:"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1119
msgid "Enter the new max size for the selected object:"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1175
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1184
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1349
msgid "Slicing cancelled"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1363
msgid "Another export job is currently running."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1513
msgid "File added to print queue"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1519
msgid "G-code file exported to "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1522
msgid "Export failed"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1534
msgid "OctoPrint upload finished."
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1577 lib/Slic3r/GUI/Plater.pm:1619
msgid "STL file exported to "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1630
msgid "AMF file exported to "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1634
msgid "Error exporting AMF file "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1646
msgid "3MF file exported to "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:1650
msgid "Error exporting 3MF file "
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2010
#, possible-perl-format
msgid "%d (%d shells)"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2012
#, possible-perl-format
msgid "Auto-repaired (%d errors)"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2017
#, possible-perl-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2022
msgid "Yes"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2085
msgid "Remove the selected object"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2088
msgid "Increase copies"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2088
msgid "Place one more copy of the selected object"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2091
msgid "Decrease copies"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2091
msgid "Remove one copy of the selected object"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2094
msgid "Set number of copies…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2094
msgid "Change the number of copies of the selected object"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2098
msgid "Rotate 45° clockwise"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2098
msgid "Rotate the selected object by 45° clockwise"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2101
msgid "Rotate 45° counter-clockwise"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2101
msgid "Rotate the selected object by 45° counter-clockwise"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2106
msgid "Rotate"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2106
msgid "Rotate the selected object by an arbitrary angle"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2108
msgid "Around X axis…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2108
msgid "Rotate the selected object by an arbitrary angle around X axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2111
msgid "Around Y axis…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2111
msgid "Rotate the selected object by an arbitrary angle around Y axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2114
msgid "Around Z axis…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2114
msgid "Rotate the selected object by an arbitrary angle around Z axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2119
msgid "Mirror"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2119
msgid "Mirror the selected object"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2121 lib/Slic3r/GUI/Plater.pm:2137
#: lib/Slic3r/GUI/Plater.pm:2153
msgid "Along X axis…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2121
msgid "Mirror the selected object along the X axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2124 lib/Slic3r/GUI/Plater.pm:2140
#: lib/Slic3r/GUI/Plater.pm:2156
msgid "Along Y axis…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2124
msgid "Mirror the selected object along the Y axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2127 lib/Slic3r/GUI/Plater.pm:2143
#: lib/Slic3r/GUI/Plater.pm:2159
msgid "Along Z axis…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2127
msgid "Mirror the selected object along the Z axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2132 lib/Slic3r/GUI/Plater.pm:2148
msgid "Scale the selected object along a single axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2134 lib/Slic3r/GUI/Plater.pm:2150
msgid "Uniformly…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2134 lib/Slic3r/GUI/Plater.pm:2150
msgid "Scale the selected object along the XYZ axes"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2137 lib/Slic3r/GUI/Plater.pm:2153
msgid "Scale the selected object along the X axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2140 lib/Slic3r/GUI/Plater.pm:2156
msgid "Scale the selected object along the Y axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2143 lib/Slic3r/GUI/Plater.pm:2159
msgid "Scale the selected object along the Z axis"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2148
msgid "Scale to size"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2163
msgid "Split the selected object into individual parts"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2166
msgid "Open the 3D cutting tool"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2170
msgid "Open the object editor dialog"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2174
msgid "Reload from Disk"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2174
msgid "Reload the selected file from Disk"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2177
msgid "Export object as STL…"
msgstr ""

#: lib/Slic3r/GUI/Plater.pm:2177
msgid "Export this single object as STL file"
msgstr ""

#: lib/Slic3r/GUI/Plater/2D.pm:131
msgid "What do you want to print today? ™"
msgstr ""

#: lib/Slic3r/GUI/Plater/2D.pm:132
msgid "Drag your objects here"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:69
msgid "1 Layer"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:71
msgid "View"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:78
msgid "Volumetric flow rate"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:85
msgid "Show"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:88 lib/Slic3r/GUI/Plater/3DPreview.pm:89
msgid "Feature types"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:106
msgid "Retractions"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:107
msgid "Unretractions"
msgstr ""

#: lib/Slic3r/GUI/Plater/3DPreview.pm:108
msgid "Shells"
msgstr ""