#ifndef WipeTowerPrusaMM_hpp_
#define WipeTowerPrusaMM_hpp_

#include <cmath>
#include <string>
#include <sstream>
#include <utility>

#include "WipeTower.hpp"


namespace Slic3r
{

namespace PrusaMultiMaterial {
	class Writer;
};



class WipeTowerPrusaMM : public WipeTower
{
public:
	enum material_type
	{
		INVALID = -1,
		PLA   = 0,		// E:210C	B:55C
		ABS   = 1,		// E:255C	B:100C
		PET   = 2,		// E:240C	B:90C
		HIPS  = 3,		// E:220C	B:100C
		FLEX  = 4,		// E:245C	B:80C
		SCAFF = 5,		// E:215C	B:55C
		EDGE  = 6,		// E:240C	B:80C
		NGEN  = 7,		// E:230C	B:80C
		PVA   = 8	    // E:210C	B:80C
	};

	// Parse material name into material_type.
	static material_type parse_material(const char *name);

	// x			-- x coordinates of wipe tower in mm ( left bottom corner )
	// y			-- y coordinates of wipe tower in mm ( left bottom corner )
	// width		-- width of wipe tower in mm ( default 60 mm - leave as it is )
	// wipe_area	-- space available for one toolchange in mm
	WipeTowerPrusaMM(float x, float y, float width, float rotation_angle, float cooling_tube_retraction,
                     float cooling_tube_length, float parking_pos_retraction, float bridging, const std::vector<float>& wiping_matrix,
                     unsigned int initial_tool) :
		m_wipe_tower_pos(x, y),
		m_wipe_tower_width(width),
		m_wipe_tower_rotation_angle(rotation_angle),
		m_y_shift(0.f),
		m_z_pos(0.f),
		m_is_first_layer(false),
        m_cooling_tube_retraction(cooling_tube_retraction),
        m_cooling_tube_length(cooling_tube_length),
        m_parking_pos_retraction(parking_pos_retraction),
		m_bridging(bridging),
        m_current_tool(initial_tool)
 	{
        unsigned int number_of_extruders = (unsigned int)(sqrt(wiping_matrix.size())+WT_EPSILON);
        for (unsigned int i = 0; i<number_of_extruders; ++i)
            wipe_volumes.push_back(std::vector<float>(wiping_matrix.begin()+i*number_of_extruders,wiping_matrix.begin()+(i+1)*number_of_extruders));
	}

	virtual ~WipeTowerPrusaMM() {}


	// Set the extruder properties.
	void set_extruder(size_t idx, material_type material, int temp, int first_layer_temp, float loading_speed,
                      float unloading_speed, float delay, std::string ramming_parameters, float nozzle_diameter)
	{
        //while (m_filpar.size() < idx+1)   // makes sure the required element is in the vector
        m_filpar.push_back(FilamentParameters());

        m_filpar[idx].material = material;
        m_filpar[idx].temperature = temp;
        m_filpar[idx].first_layer_temperature = first_layer_temp;
        m_filpar[idx].loading_speed = loading_speed;
        m_filpar[idx].unloading_speed = unloading_speed;
        m_filpar[idx].delay = delay;
        m_filpar[idx].cooling_time = 14.f; // let's fix it for now, cooling moves will be reworked for 1.41 anyway
        m_filpar[idx].nozzle_diameter = nozzle_diameter; // to be used in future with (non-single) multiextruder MM

        m_perimeter_width = nozzle_diameter * Width_To_Nozzle_Ratio; // all extruders are now assumed to have the same diameter

        std::stringstream stream{ramming_parameters};
        float speed = 0.f;
        stream >> m_filpar[idx].ramming_line_width_multiplicator >> m_filpar[idx].ramming_step_multiplicator;
        m_filpar[idx].ramming_line_width_multiplicator /= 100;
        m_filpar[idx].ramming_step_multiplicator /= 100;
        while (stream >> speed)
            m_filpar[idx].ramming_speed.push_back(speed);
	}


	// Appends into internal structure m_plan containing info about the future wipe tower
	// to be used before building begins. The entries must be added ordered in z.
	void plan_toolchange(float z_par, float layer_height_par, unsigned int old_tool, unsigned int new_tool, bool brim);

	// Iterates through prepared m_plan, generates ToolChangeResults and appends them to "result"
	void generate(std::vector<std::vector<WipeTower::ToolChangeResult>> &result);



	// Switch to a next layer.
	virtual void set_layer(
		// Print height of this layer.
		float print_z,
		// Layer height, used to calculate extrusion the rate.
		float layer_height,
		// Maximum number of tool changes on this layer or the layers below.
		size_t max_tool_changes,
		// Is this the first layer of the print? In that case print the brim first.
		bool is_first_layer,
		// Is this the last layer of the waste tower?
		bool is_last_layer)
	{
		m_z_pos 				= print_z;
		m_layer_height			= layer_height;
		m_is_first_layer 		= is_first_layer;
		m_print_brim = is_first_layer;
		m_depth_traversed  = 0.f;
		m_current_shape = (! is_first_layer && m_current_shape == SHAPE_NORMAL) ? SHAPE_REVERSED : SHAPE_NORMAL;
		if (is_first_layer) {
            this->m_num_layer_changes 	= 0;
            this->m_num_tool_changes 	= 0;
        }
        else
            ++ m_num_layer_changes;
		
		// Calculate extrusion flow from desired line width, nozzle diameter, filament diameter and layer_height:
		m_extrusion_flow = extrusion_flow(layer_height);

        // Advance m_layer_info iterator, making sure we got it right
		while (!m_plan.empty() && m_layer_info->z < print_z - WT_EPSILON && m_layer_info+1 != m_plan.end())
			++m_layer_info;
	}

	// Return the wipe tower position.
	virtual const xy& 		 position() const { return m_wipe_tower_pos; }
	// Return the wipe tower width.
	virtual float     		 width()    const { return m_wipe_tower_width; }
	// The wipe tower is finished, there should be no more tool changes or wipe tower prints.
	virtual bool 	  		 finished() const { return m_max_color_changes == 0; }

	// Returns gcode to prime the nozzles at the front edge of the print bed.
	virtual ToolChangeResult prime(
		// print_z of the first layer.
		float 						first_layer_height, 
		// Extruder indices, in the order to be primed. The last extruder will later print the wipe tower brim, print brim and the object.
		const std::vector<unsigned int> &tools,
		// If true, the last priming are will be the same as the other priming areas, and the rest of the wipe will be performed inside the wipe tower.
		// If false, the last priming are will be large enough to wipe the last extruder sufficiently.
		bool 						last_wipe_inside_wipe_tower);

	// Returns gcode for a toolchange and a final print head position.
	// On the first layer, extrude a brim around the future wipe tower first.
	virtual ToolChangeResult tool_change(unsigned int new_tool, bool last_in_layer);

	// Fill the unfilled space with a sparse infill.
	// Call this method only if layer_finished() is false.
	virtual ToolChangeResult finish_layer();

	// Is the current layer finished?
	virtual bool 			 layer_finished() const {
		return ( (m_is_first_layer ? m_wipe_tower_depth - m_perimeter_width : m_layer_info->depth) - WT_EPSILON < m_depth_traversed);
	}


private:
	WipeTowerPrusaMM();

	enum wipe_shape // A fill-in direction
	{
		SHAPE_NORMAL = 1,
		SHAPE_REVERSED = -1
	};


    const bool  m_peters_wipe_tower   = false; // sparse wipe tower inspired by Peter's post processor - not finished yet
    const float Filament_Area         = M_PI * 1.75f * 1.75f / 4.f; // filament area in mm^2
    const float Width_To_Nozzle_Ratio = 1.25f; // desired line width (oval) in multiples of nozzle diameter - may not be actually neccessary to adjust
    const float WT_EPSILON            = 1e-3f;


	xy 	   m_wipe_tower_pos; 			// Left front corner of the wipe tower in mm.
	float  m_wipe_tower_width; 			// Width of the wipe tower.
	float  m_wipe_tower_depth 	= 0.f; 	// Depth of the wipe tower
	float  m_wipe_tower_rotation_angle = 0.f; // Wipe tower rotation angle in degrees (with respect to x axis)
	float  m_y_shift			= 0.f;  // y shift passed to writer
	float  m_z_pos 				= 0.f;  // Current Z position.
	float  m_layer_height 		= 0.f; 	// Current layer height.
	size_t m_max_color_changes 	= 0; 	// Maximum number of color changes per layer.
	bool   m_is_first_layer 	= false;// Is this the 1st layer of the print? If so, print the brim around the waste tower.

	// G-code generator parameters.
    float           m_cooling_tube_retraction   = 0.f;
    float           m_cooling_tube_length       = 0.f;
    float           m_parking_pos_retraction    = 0.f;
    float           m_bridging                  = 0.f;
    bool            m_adhesion                  = true;

	float m_perimeter_width = 0.4 * Width_To_Nozzle_Ratio; // Width of an extrusion line, also a perimeter spacing for 100% infill.
	float m_extrusion_flow = 0.038; //0.029f;// Extrusion flow is derived from m_perimeter_width, layer height and filament diameter.


    struct FilamentParameters {
        material_type 	    material = PLA;
        int  			    temperature = 0;
        int  			    first_layer_temperature = 0;
        float               loading_speed = 0.f;
        float               unloading_speed = 0.f;
        float               delay = 0.f ;
        float               cooling_time = 0.f;
        float               ramming_line_width_multiplicator = 0.f;
        float               ramming_step_multiplicator = 0.f;
        std::vector<float>  ramming_speed;
        float               nozzle_diameter;
    };

	// Extruder specific parameters.
    std::vector<FilamentParameters> m_filpar;


	// State of the wipe tower generator.
	unsigned int m_num_layer_changes = 0; // Layer change counter for the output statistics.
	unsigned int m_num_tool_changes  = 0; // Tool change change counter for the output statistics.
	///unsigned int 	m_idx_tool_change_in_layer = 0; // Layer change counter in this layer. Counting up to m_max_color_changes.
	bool m_print_brim = true;
	// A fill-in direction (positive Y, negative Y) alternates with each layer.
	wipe_shape   	m_current_shape = SHAPE_NORMAL;
	unsigned int 	m_current_tool;
    std::vector<std::vector<float>> wipe_volumes;

	float           m_depth_traversed = 0.f; // Current y position at the wipe tower.
	bool 			m_left_to_right   = true;
	float			m_extra_spacing   = 1.f;


	// Calculates extrusion flow needed to produce required line width for given layer height
	float extrusion_flow(float layer_height = -1.f) const	// negative layer_height - return current m_extrusion_flow
	{
		if ( layer_height < 0 )
			return m_extrusion_flow;
		return layer_height * ( m_perimeter_width - layer_height * (1-M_PI/4.f)) / Filament_Area;
	}

	// Calculates length of extrusion line to extrude given volume
	float volume_to_length(float volume, float line_width, float layer_height) const {
		return volume / (layer_height * (line_width - layer_height * (1. - M_PI / 4.)));
	}

	// Calculates depth for all layers and propagates them downwards
	void plan_tower();

	// Goes through m_plan and recalculates depths and width of the WT to make it exactly square - experimental
	void make_wipe_tower_square();

    // Goes through m_plan, calculates border and finish_layer extrusions and subtracts them from last wipe
    void save_on_last_wipe();


	struct box_coordinates
	{
		box_coordinates(float left, float bottom, float width, float height) :
			ld(left        , bottom         ),
			lu(left        , bottom + height),
			rd(left + width, bottom         ),
			ru(left + width, bottom + height) {}
		box_coordinates(const xy &pos, float width, float height) : box_coordinates(pos.x, pos.y, width, height) {}
		void translate(const xy &shift) {
			ld += shift; lu += shift;
			rd += shift; ru += shift;
		}
		void translate(const float dx, const float dy) { translate(xy(dx, dy)); }
		void expand(const float offset) {
			ld += xy(- offset, - offset);
			lu += xy(- offset,   offset);
			rd += xy(  offset, - offset);
			ru += xy(  offset,   offset);
		}
		void expand(const float offset_x, const float offset_y) {
			ld += xy(- offset_x, - offset_y);
			lu += xy(- offset_x,   offset_y);
			rd += xy(  offset_x, - offset_y);
			ru += xy(  offset_x,   offset_y);
		}
		xy ld;  // left down
		xy lu;	// left upper 
		xy rd;	// right lower
		xy ru;  // right upper
	};


	// to store information about tool changes for a given layer
	struct WipeTowerInfo{
		struct ToolChange {
			unsigned int old_tool;
			unsigned int new_tool;
			float required_depth;
            float ramming_depth;
            float first_wipe_line;
			ToolChange(unsigned int old,unsigned int newtool,float depth=0.f,float ramming_depth=0.f,float fwl=0.f)
            : old_tool{old}, new_tool{newtool}, required_depth{depth}, ramming_depth{ramming_depth},first_wipe_line{fwl} {}
		};
		float z;		// z position of the layer
		float height;	// layer height
		float depth;	// depth of the layer based on all layers above
		float extra_spacing;
		float toolchanges_depth() const { float sum = 0.f; for (const auto &a : tool_changes) sum += a.required_depth; return sum; }

		std::vector<ToolChange> tool_changes;

		WipeTowerInfo(float z_par, float layer_height_par)
			: z{z_par}, height{layer_height_par}, depth{0}, extra_spacing{1.f} {}
	};

	std::vector<WipeTowerInfo> m_plan; 	// Stores information about all layers and toolchanges for the future wipe tower (filled by plan_toolchange(...))
	std::vector<WipeTowerInfo>::iterator m_layer_info = m_plan.end();


	// Returns gcode for wipe tower brim
	// sideOnly			-- set to false -- experimental, draw brim on sides of wipe tower
	// offset			-- set to 0		-- experimental, offset to replace brim in front / rear of wipe tower
	ToolChangeResult toolchange_Brim(bool sideOnly = false, float y_offset = 0.f);

	void toolchange_Unload(
		PrusaMultiMaterial::Writer &writer,
		const box_coordinates  &cleaning_box, 
		const material_type	 	current_material,
		const int 				new_temperature);

	void toolchange_Change(
		PrusaMultiMaterial::Writer &writer,
		const unsigned int		new_tool,
		material_type 			new_material);
	
	void toolchange_Load(
		PrusaMultiMaterial::Writer &writer,
		const box_coordinates  &cleaning_box);
	
	void toolchange_Wipe(
		PrusaMultiMaterial::Writer &writer,
		const box_coordinates  &cleaning_box,
		float wipe_volume);
};




}; // namespace Slic3r

#endif /* WipeTowerPrusaMM_hpp_ */