1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
|
use Test::More;
use strict;
use warnings;
plan tests => 14;
BEGIN {
use FindBin;
use lib "$FindBin::Bin/../lib";
use local::lib "$FindBin::Bin/../local-lib";
}
use List::Util qw(none all);
use Slic3r;
use Slic3r::Test;
my $gcodegen;
sub buffer {
my $config = shift;
if (defined($config)) {
$config = $config->clone();
} else {
$config = Slic3r::Config->new;
}
my $config_override = shift;
foreach my $key (keys %{$config_override}) {
$config->set($key, ${$config_override}{$key});
}
my $print_config = Slic3r::Config::Print->new;
$print_config->apply_dynamic($config);
$gcodegen = Slic3r::GCode->new;
$gcodegen->apply_print_config($print_config);
$gcodegen->set_layer_count(10);
$gcodegen->set_extruders([ 0 ]);
return Slic3r::GCode::CoolingBuffer->new($gcodegen);
}
my $gcode1 = "G1 X100 E1 F3000\n";
my $print_time1 = 100 / (3000 / 60); # 2 sec
my $gcode2 = $gcode1 . "G1 X0 E1 F3000\n";
my $print_time2 = 2 * $print_time1; # 4 sec
my $config = Slic3r::Config::new_from_defaults;
# Default cooling settings.
$config->set('bridge_fan_speed', [ 100 ]);
$config->set('cooling', [ 1 ]);
$config->set('fan_always_on', [ 0 ]);
$config->set('fan_below_layer_time', [ 60 ]);
$config->set('max_fan_speed', [ 100 ]);
$config->set('min_print_speed', [ 10 ]);
$config->set('slowdown_below_layer_time', [ 5 ]);
# Default print speeds.
$config->set('bridge_speed', 60);
$config->set('external_perimeter_speed', '50%');
$config->set('first_layer_speed', 30);
$config->set('gap_fill_speed', 20);
$config->set('infill_speed', 80);
$config->set('perimeter_speed', 60);
$config->set('small_perimeter_speed', 15);
$config->set('solid_infill_speed', 20);
$config->set('top_solid_infill_speed', 15);
$config->set('max_print_speed', 80);
# Override for tests.
$config->set('disable_fan_first_layers', [ 0 ]);
{
my $gcode_src = "G1 F3000;_EXTRUDE_SET_SPEED\nG1 X100 E1";
# Print time of $gcode.
my $print_time = 100 / (3000 / 60);
my $buffer = buffer($config, { 'slowdown_below_layer_time' => [ $print_time * 0.999 ] });
my $gcode = $buffer->process_layer($gcode_src, 0);
like $gcode, qr/F3000/, 'speed is not altered when elapsed time is greater than slowdown threshold';
}
{
my $gcode_src =
"G1 X50 F2500\n" .
"G1 F3000;_EXTRUDE_SET_SPEED\n" .
"G1 X100 E1\n" .
";_EXTRUDE_END\n" .
"G1 E4 F400",
# Print time of $gcode.
my $print_time = 50 / (2500 / 60) + 100 / (3000 / 60) + 4 / (400 / 60);
my $buffer = buffer($config, { 'slowdown_below_layer_time' => [ $print_time * 1.001 ] });
my $gcode = $buffer->process_layer($gcode_src, 0);
unlike $gcode, qr/F3000/, 'speed is altered when elapsed time is lower than slowdown threshold';
like $gcode, qr/F2500/, 'speed is not altered for travel moves';
like $gcode, qr/F400/, 'speed is not altered for extruder-only moves';
}
{
my $buffer = buffer($config, {
'fan_below_layer_time' => [ $print_time1 * 0.88 ],
'slowdown_below_layer_time' => [ $print_time1 * 0.99 ]
});
my $gcode = $buffer->process_layer($gcode1, 0);
unlike $gcode, qr/M106/, 'fan is not activated when elapsed time is greater than fan threshold';
}
{
my $gcode .= buffer($config, { 'slowdown_below_layer_time', [ $print_time2 * 0.99 ] })->process_layer($gcode2, 0);
like $gcode, qr/F3000/, 'slowdown is computed on all objects printing at the same Z';
}
{
# use an elapsed time which is < the threshold but greater than it when summed twice
my $buffer = buffer($config, {
'fan_below_layer_time' => [ $print_time2 * 0.65],
'slowdown_below_layer_time' => [ $print_time2 * 0.7 ]
});
my $gcode = $buffer->process_layer($gcode2, 0) .
$buffer->process_layer($gcode2, 1);
unlike $gcode, qr/M106/, 'fan is not activated on all objects printing at different Z';
}
{
# use an elapsed time which is < the threshold even when summed twice
my $buffer = buffer($config, {
'fan_below_layer_time' => [ $print_time2 + 1 ],
'slowdown_below_layer_time' => [ $print_time2 + 2 ]
});
my $gcode = $buffer->process_layer($gcode2, 0) .
$buffer->process_layer($gcode2, 1);
like $gcode, qr/M106/, 'fan is activated on all objects printing at different Z';
}
{
my $buffer = buffer($config, {
'cooling' => [ 1 , 0 ],
'fan_below_layer_time' => [ $print_time2 + 1, $print_time2 + 1 ],
'slowdown_below_layer_time' => [ $print_time2 + 2, $print_time2 + 2 ]
});
$buffer->gcodegen->set_extruders([ 0, 1 ]);
my $gcode = $buffer->process_layer($gcode1 . "T1\nG1 X0 E1 F3000\n", 0);
like $gcode, qr/^M106/, 'fan is activated for the 1st tool';
like $gcode, qr/.*M107/, 'fan is disabled for the 2nd tool';
}
{
my $config = Slic3r::Config::new_from_defaults;
$config->set('cooling', [ 1 ]);
$config->set('bridge_fan_speed', [ 100 ]);
$config->set('fan_below_layer_time', [ 0 ]);
$config->set('slowdown_below_layer_time', [ 0 ]);
$config->set('bridge_speed', 99);
$config->set('top_solid_layers', 1); # internal bridges use solid_infil speed
$config->set('bottom_solid_layers', 1); # internal bridges use solid_infil speed
my $print = Slic3r::Test::init_print('overhang', config => $config);
my $fan = 0;
my $fan_with_incorrect_speeds = my $fan_with_incorrect_print_speeds = 0;
my $bridge_with_no_fan = 0;
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
my ($self, $cmd, $args, $info) = @_;
if ($cmd eq 'M106') {
$fan = $args->{S};
$fan_with_incorrect_speeds++ if $fan != 255;
} elsif ($cmd eq 'M107') {
$fan = 0;
} elsif ($info->{extruding} && $info->{dist_XY} > 0) {
$fan_with_incorrect_print_speeds++
if ($fan > 0) && ($args->{F} // $self->F) != 60*$config->bridge_speed;
$bridge_with_no_fan++
if !$fan && ($args->{F} // $self->F) == 60*$config->bridge_speed;
}
});
ok !$fan_with_incorrect_speeds, 'bridge fan speed is applied correctly';
ok !$fan_with_incorrect_print_speeds, 'bridge fan is only turned on for bridges';
ok !$bridge_with_no_fan, 'bridge fan is turned on for all bridges';
}
{
my $config = Slic3r::Config::new_from_defaults;
$config->set('cooling', [ 1 ]);
$config->set('fan_below_layer_time', [ 0 ]);
$config->set('slowdown_below_layer_time', [ 10 ]);
$config->set('min_print_speed', [ 0 ]);
$config->set('start_gcode', '');
$config->set('first_layer_speed', '100%');
$config->set('external_perimeter_speed', 99);
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
my @layer_times = (0); # in seconds
my %layer_external = (); # z => 1
Slic3r::GCode::Reader->new->parse(my $gcode = Slic3r::Test::gcode($print), sub {
my ($self, $cmd, $args, $info) = @_;
if ($cmd eq 'G1') {
if ($info->{dist_Z}) {
push @layer_times, 0;
$layer_external{ $args->{Z} } = 0;
}
$layer_times[-1] += abs($info->{dist_XY} || $info->{dist_E} || $info->{dist_Z} || 0) / ($args->{F} // $self->F) * 60;
if ($args->{F} && $args->{F} == $config->external_perimeter_speed*60) {
$layer_external{ $self->Z }++;
}
}
});
@layer_times = grep $_, @layer_times;
my $all_below = none { $_ < $config->slowdown_below_layer_time->[0] } @layer_times;
ok $all_below, 'slowdown_below_layer_time is honored';
# check that all layers have at least one unaltered external perimeter speed
# my $external = all { $_ > 0 } values %layer_external;
# ok $external, 'slowdown_below_layer_time does not alter external perimeters';
}
__END__
|
