[vendor]
# Vendor name will be shown by the Config Wizard.
name = Vertex
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.1.26
# Where to get the updates from?
config_update_url = https://vertex3dprinters.github.io/VERTEX-Slicer-Profiles/
changelog_url = https://vertex3dprinters.github.io/VERTEX-Slicer-Profiles/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
#TODO: One day we may differentiate variants of the nozzles / hot ends,
#for example by the melt zone size, or whether the nozzle is hardened.
# Printer model name will be shown by the installation wizard.

[printer_model:VERTEX_XL]
name = VERTEX XL
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = XL
bed_model = vertex_xl_bed.stl
bed_texture = vertex_xl.svg
default_materials = VERTEX PETG @VERTEX; Generic PLA @VERTEX; Generic ABS @VERTEX; Generic PETG @VERTEX; Prusament PLA @VERTEX; Prusament PETG @VERTEX; Prusament ASA @VERTEX; Prusament PC Blend @VERTEX; Prusament PVB @VERTEX

[printer_model:VERTEX_XLMMU2S]
name = VERTEX XL MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = XL
bed_model = vertex_xl_bed.stl
bed_texture = vertex_xl.svg
default_materials = VERTEX PETG @VERTEXMMU2; Generic PLA @VERTEX; Generic ABS @VERTEX; Generic PETG @VERTEX; Prusament PLA @VERTEXMMU2; Prusament PETG @VERTEXMMU2; Prusament ASA @VERTEXMMU2; Verbatim BVOH @VERTEXMMU2; Prusament PC Blend @VERTEXMMU2; Prusament PVB @VERTEXMMU2

[printer_model:VERTEX_L]
name = VERTEX L
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = L
bed_model = vertex_l_bed.stl
bed_texture = vertex_l.svg
default_materials = VERTEX PETG @VERTEX; Generic PLA @VERTEX; Generic ABS @VERTEX; Generic PETG @VERTEX; Prusament PLA @VERTEX; Prusament PETG @VERTEX; Prusament ASA @VERTEX; Prusament PC Blend @VERTEX; Prusament PVB @VERTEX

[printer_model:VERTEX_LMMU2S]
name = VERTEX L MMU2S
variants = 0.4; 0.25; 0.6; 0.8
technology = FFF
family = L
bed_model = vertex_l_bed.stl
bed_texture = vertex_l.svg
default_materials = VERTEX PETG @VERTEXMMU2; Generic PLA @VERTEX; Generic ABS @VERTEX; Generic PETG @VERTEX; Prusament PLA @VERTEXMMU2; Prusament PETG @VERTEXMMU2; Prusament ASA @VERTEXMMU2; Verbatim BVOH @VERTEXMMU2; Prusament PC Blend @VERTEXMMU2; Prusament PVB @VERTEXMMU2

# All presets starting with asterisk, for example *common_vertex*, are intermediate and they will
# not make it into the user interface.

# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle.
# All other print presets will derive from the *common_vertex* print preset.
[print:*common_vertex*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = monotonic
bottom_solid_min_thickness = 0.5
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 80%
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
ensure_vertical_shell_thickness = 1
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.45
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = gyroid
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
first_layer_min_speed = 20
first_layer_infill_speed = 20
first_layer_size_compensation = -0.2
gap_fill_speed = 40
gcode_comments = 0
gcode_label_objects = 1
infill_anchor = 2.5
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs_width_speed = 0
overhangs_width = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
post_process = 
print_settings_id = 
raft_layers = 0
seam_position = cost
seam_angle_cost = 30%
seam_travel_cost = 70%
single_extruder_multi_material_priming = 1
skirts = 1
skirt_distance = 2
skirt_height = 3
small_perimeter_speed = 25
solid_fill_pattern = rectilineargapfill
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.1
support_material_contact_distance_bottom = 0.1
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thin_walls = 0
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 40
top_solid_min_thickness = 0.7
travel_speed = 180
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 10
wipe_tower_y = 30
xy_size_compensation = 0
extrusion_spacing =
perimeter_extrusion_spacing =
external_perimeter_extrusion_spacing =
first_layer_extrusion_spacing =
infill_extrusion_spacing =
solid_infill_extrusion_spacing =
top_infill_extrusion_spacing =

[print:*XL*]
single_extruder_multi_material_priming = 0
travel_speed = 180
wipe_tower_x = 10
wipe_tower_y = 30

[print:*XL_06*]
fill_density = 15%
single_extruder_multi_material_priming = 0
travel_speed = 180
wipe_tower_x = 10
wipe_tower_y = 30

# Print parameters common to a 0.25mm diameter nozzle.
[print:*0.25nozzle*]
first_layer_size_compensation = 0
external_perimeter_extrusion_width = 0.25
extrusion_width = 0.25
first_layer_extrusion_width = 0.3
infill_extrusion_width = 0.25
perimeter_extrusion_width = 0.25
solid_infill_extrusion_width = 0.25
top_infill_extrusion_width = 0.25
support_material_extrusion_width = 0.25
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_spacing = 1
support_material_xy_spacing = 150%
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode

[print:*0.25nozzleVertexXL*]
inherits = *0.25nozzle*
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 45
solid_infill_speed = 45
top_solid_infill_speed = 30
support_material_speed = 40
bridge_speed = 20
gap_fill_speed = 30
perimeter_acceleration = 500
infill_acceleration = 1000
bridge_acceleration = 500
first_layer_acceleration = 500
default_acceleration = 1000
max_print_speed = 80
perimeters = 3
fill_density = 20%

# Print parameters common to a 0.6mm diameter nozzle.
[print:*0.6nozzle*]
external_perimeter_extrusion_width = 0.61
extrusion_width = 0.67
first_layer_extrusion_width = 0.65
infill_extrusion_width = 0.7
perimeter_extrusion_width = 0.65
solid_infill_extrusion_width = 0.65
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.55
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.15
support_material_contact_distance_bottom = 0.15
support_material_xy_spacing = 80%
support_material_interface_spacing = 0.3
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
infill_anchor_max = 15
top_solid_min_thickness = 0.9
bottom_solid_min_thickness = 0.6

[print:*0.8nozzle*]
external_perimeter_extrusion_width = 0.9
extrusion_width = 0.9
first_layer_extrusion_width = 0.9
infill_extrusion_width = 0.9
perimeter_extrusion_width = 0.9
solid_infill_extrusion_width = 0.9
top_infill_extrusion_width = 0.8
support_material_extrusion_width = 0.7
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.25
support_material_contact_distance_bottom = 0.25
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_spacing = 2
support_material_xy_spacing = 80%
support_material_threshold = 50
output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
fill_density = 15%
infill_anchor_max = 20
top_solid_layers = 4
bottom_solid_layers = 3
skirt_distance = 3
skirt_height = 2
first_layer_height = 0.3
infill_overlap = 30%
bridge_speed = 22
gap_fill_speed = 30
bridge_flow_ratio = 90%
perimeter_acceleration = 800
infill_acceleration = 1000
bridge_acceleration = 1000
first_layer_acceleration = 1000
default_acceleration = 1000
top_solid_min_thickness = 1.2
bottom_solid_min_thickness = 0.8
single_extruder_multi_material_priming = 0

[print:*0.6nozzleVertexXL*]
inherits = *0.6nozzle*
external_perimeter_extrusion_width = 0.65
extrusion_width = 0.65
infill_extrusion_width = 0.65
bridge_flow_ratio = 95%
bridge_speed = 25

[print:*soluble_support*]
overhangs_width_speed = 50%
overhangs_width = 75%
skirts = 0
support_material = 1
support_material_contact_distance_type = none
support_material_contact_distance_top = 0
support_material_contact_distance_bottom = 0
support_material_extruder = 4
support_material_extrusion_width = 0.45
support_material_interface_extruder = 4
support_material_interface_spacing = 0.1
support_material_synchronize_layers = 1
support_material_threshold = 80
support_material_with_sheath = 1
wipe_tower_bridging = 6
support_material_interface_speed = 80%

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.05mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.05mm*]
inherits = *common_vertex*
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_flow_ratio = 70%
default_acceleration = 1000
external_perimeter_speed = 20
fill_density = 20%
first_layer_acceleration = 500
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 30
max_print_speed = 80
small_perimeter_speed = 20
solid_infill_speed = 30
support_material_extrusion_width = 0.3
support_material_spacing = 1.5
layer_height = 0.05
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
support_material_speed = 30
top_solid_infill_speed = 20
top_solid_layers = 15

# L or XL #
[print:0.05mm ULTRADETAIL @VERTEX]
inherits = *0.05mm*; *XL*
fill_density = 15%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4

# L or XL #
[print:0.05mm ULTRADETAIL @0.25 nozzle VERTEX]
inherits = *0.05mm*; *0.25nozzle*; *XL*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.25 and num_extruders==1
fill_density = 20%

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.07mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.07mm*]
inherits = *common_vertex*
bottom_solid_layers = 8
bridge_acceleration = 300
bridge_flow_ratio = 70%
bridge_speed = 20
default_acceleration = 1000
external_perimeter_speed = 20
fill_density = 15%
first_layer_acceleration = 500
gap_fill_speed = 20
infill_acceleration = 800
infill_speed = 40
max_print_speed = 80
small_perimeter_speed = 20
solid_infill_speed = 40
support_material_extrusion_width = 0.3
support_material_spacing = 1.5
layer_height = 0.07
perimeter_acceleration = 300
perimeter_speed = 30
perimeters = 3
support_material_speed = 40
top_solid_infill_speed = 30
top_solid_layers = 11

# L or XL #
[print:0.07mm ULTRADETAIL @VERTEX]
inherits = *0.07mm*; *XL*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/  and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material
top_infill_extrusion_width = 0.4

[print:0.07mm ULTRADETAIL @0.25 nozzle VERTEX]
inherits = *0.07mm*; *0.25nozzle*; *XL*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.25 and num_extruders==1
infill_speed = 30
solid_infill_speed = 30
support_material_speed = 30
top_solid_infill_speed = 20
fill_density = 20%

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.10mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.10mm*]
inherits = *common_vertex*
bottom_solid_layers = 7
bridge_flow_ratio = 70%
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
layer_height = 0.1
perimeter_acceleration = 800
top_solid_layers = 9

# L or XL #
[print:0.10mm DETAIL @VERTEX]
inherits = *0.10mm*; *XL*
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 40
fill_density = 15%
perimeters = 3

# L or XL #
[print:0.10mm DETAIL @0.25 nozzle VERTEX]
inherits = *0.10mm*; *0.25nozzleVertexXL*; *XL*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.25
fill_density = 20%

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.15mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.15mm*]
inherits = *common_vertex*
bottom_solid_layers = 5
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.15
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 7

# L or XL #
[print:0.15mm QUALITY @VERTEX]
inherits = *0.15mm*; *XL*
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_density = 15%

[print:0.15mm SPEED @VERTEX]
inherits = *0.15mm*; *XL*
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

# L or XL #
[print:0.15mm QUALITY @0.25 nozzle VERTEX]
inherits = *0.15mm*; *0.25nozzleVertexXL*; *XL*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.25
fill_density = 20%

# L or XL #
[print:0.15mm DETAIL @0.6 nozzle VERTEX]
inherits = *0.15mm*; *0.6nozzleVertexXL*; *XL_06*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45

# VERTEX MMU #
[print:0.15mm SOLUBLE FULL @VERTEXMMU]
inherits = 0.15mm SPEED @VERTEX; *soluble_support*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45

# VERTEX MMU #
[print:0.15mm SOLUBLE INTERFACE @VERTEXMMU]
inherits = 0.15mm SOLUBLE FULL @VERTEXMMU
# alias = 0.15mm SOLUBLE INTERFACE
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.20mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.20mm*]
inherits = *common_vertex*
bottom_solid_layers = 4
bridge_flow_ratio = 95%
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.2
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 5

# L or XL #
[print:0.20mm QUALITY @VERTEX]
inherits = *0.20mm*; *XL*
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 80
max_print_speed = 200
perimeter_speed = 45
solid_infill_speed = 80
top_solid_infill_speed = 40
fill_density = 15%

[print:0.20mm SPEED @VERTEX]
inherits = *0.20mm*; *XL*
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

# L or XL #
[print:0.20mm DETAIL @0.6 nozzle VERTEX]
inherits = *0.20mm*; *0.6nozzleVertexXL*; *XL_06*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45

# VERTEX MMU #
[print:0.20mm SOLUBLE FULL @VERTEXMMU]
inherits = 0.20mm SPEED @VERTEX; *soluble_support*
# alias = 0.20mm SOLUBLE FULL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
perimeter_speed = 40
solid_infill_speed = 40
infill_speed = 80
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
support_material_speed = 45

# VERTEX MMU #
[print:0.20mm SOLUBLE INTERFACE @VERTEXMMU]
inherits = 0.20mm SOLUBLE FULL @VERTEXMMU
# alias = 0.20mm SOLUBLE INTERFACE
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.25mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.25mm*]
inherits = *common_vertex*
bottom_solid_layers = 4
bridge_flow_ratio = 95%
external_perimeter_speed = 40
perimeter_acceleration = 800
layer_height = 0.25
perimeter_speed = 50
top_solid_layers = 4

# L or XL #
[print:0.25mm SPEED @VERTEX]
inherits = *0.25mm*; *XL*
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 200
max_print_speed = 200
perimeter_speed = 60
solid_infill_speed = 200
top_solid_infill_speed = 50

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.30mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.30mm*]
inherits = *common_vertex*
bottom_solid_layers = 4
bridge_flow_ratio = 95%
external_perimeter_speed = 40
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.3
perimeter_acceleration = 800
perimeter_speed = 50
solid_infill_speed = 50
top_infill_extrusion_width = 0.4
top_solid_layers = 4

[print:0.30mm QUALITY @0.6 nozzle VERTEX]
inherits = *0.30mm*; *0.6nozzleVertexXL*; *XL_06*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45

[print:0.30mm DRAFT @VERTEX]
inherits = *0.30mm*; *XL*
bottom_solid_layers = 3
bridge_speed = 30
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.4
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 85
max_print_speed = 200
perimeter_speed = 50
small_perimeter_speed = 30
solid_infill_speed = 80
top_solid_infill_speed = 40
support_material_speed = 45
external_perimeter_extrusion_width = 0.6
extrusion_width = 0.5
first_layer_extrusion_width = 0.42
infill_extrusion_width = 0.5
perimeter_extrusion_width = 0.5
solid_infill_extrusion_width = 0.5
top_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.38

[print:0.30mm SOLUBLE FULL @0.6 nozzle VERTEX]
inherits = 0.30mm QUALITY @0.6 nozzle VERTEX; *soluble_support*
# alias = 0.30mm SOLUBLE FULL
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.6 and num_extruders>1
notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
support_material_extruder = 5
support_material_interface_extruder = 5
support_material_speed = 40
perimeter_speed = 40
solid_infill_speed = 40
top_infill_extrusion_width = 0.6
support_material_extrusion_width = 0.6
top_solid_infill_speed = 30
support_material_xy_spacing = 80%

[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle VERTEX]
inherits = 0.30mm SOLUBLE FULL @0.6 nozzle VERTEX
# alias = 0.30mm SOLUBLE INTERFACE
notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
support_material_extruder = 0
support_material_interface_layers = 3
support_material_with_sheath = 0

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.35mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.35mm*]
inherits = *common_vertex*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.75
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.35
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 50
top_solid_layers = 4

# XL #
[print:0.35mm SPEED @0.6 nozzle VERTEX]
inherits = *0.35mm*; *0.6nozzleVertexXL*; *XL_06*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68

# XXXXXXXXXXXXXXXXXXXX
# XXX--- 0.40mm ---XXX
# XXXXXXXXXXXXXXXXXXXX

[print:*0.40mm*]
inherits = *common_vertex*
bottom_solid_layers = 3
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 40
first_layer_extrusion_width = 0.65
infill_acceleration = 2000
infill_speed = 60
layer_height = 0.4
perimeter_acceleration = 800
perimeter_extrusion_width = 0.65
perimeter_speed = 50
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
top_solid_infill_speed = 40
top_solid_layers = 4

# XL #
[print:0.40mm DRAFT @0.6 nozzle VERTEX]
inherits = *0.40mm*; *0.6nozzleVertexXL*; *XL_06*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.6
external_perimeter_speed = 35
infill_acceleration = 1000
infill_speed = 70
max_print_speed = 100
perimeter_speed = 45
solid_infill_speed = 70
top_solid_infill_speed = 45
external_perimeter_extrusion_width = 0.68
perimeter_extrusion_width = 0.68
infill_extrusion_width = 0.68
solid_infill_extrusion_width = 0.68

## 0.8mm nozzle print profiles

[print:0.30mm DETAIL @0.8 nozzle VERTEX]
inherits = *common_vertex*; *0.8nozzle*
layer_height = 0.30
## Only for MMU2 Single mode at the moment
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 80
solid_infill_speed = 50
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.40mm QUALITY @0.8 nozzle VERTEX]
inherits = *common_vertex*; *0.8nozzle*
layer_height = 0.4
## Only for MMU2 Single mode at the moment
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 35
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 45
top_solid_infill_speed = 35
support_material_speed = 40

[print:0.55mm DRAFT @0.8 nozzle VERTEX]
inherits = *common_vertex*; *0.8nozzle*
layer_height = 0.55
## Only for MMU2 Single mode at the moment
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and nozzle_diameter[0]==0.8 and num_extruders==1
perimeter_speed = 30
external_perimeter_speed = 25
infill_acceleration = 1000
infill_speed = 50
max_print_speed = 50
solid_infill_speed = 40
support_material_speed = 35
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.25
support_material_contact_distance_bottom = 0.25
top_solid_infill_speed = 30
external_perimeter_extrusion_width = 1
perimeter_extrusion_width = 1


# XXXXXXxxXXXXXXXXXXXXXX
# XXX--- filament ---XXX
# XXXXXXXXxxXXXXXXXXXXXX

[filament:*common_vertex*]
cooling = 1
compatible_printers = 
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_toolchange_delay = 0
filament_cooling_moves = 4
filament_cooling_initial_speed = 2.2
filament_cooling_final_speed = 3.4
filament_load_time = 0
filament_unload_time = 0
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_minimal_purge_on_wipe_tower = 15
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 15
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif} ; Filament gcode"

[filament:*PLA_VERTEX*]
inherits = *common_vertex*
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/  and num_extruders==1
bed_temperature = 60
bridge_fan_speed = 100
disable_fan_first_layers = 1
full_fan_speed_layer = 4
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF8000
filament_max_volumetric_speed = 15
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
temperature = 210
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"

[filament:*PET_VERTEX*]
inherits = *common_vertex*
bed_temperature = 90
bridge_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature = 240
filament_retract_length = 1.4
filament_retract_lift = 0.2
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:*PET06_VERTEX*]
inherits = *PET_VERTEX*
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
filament_max_volumetric_speed = 15

[filament:*ABS_VERTEX*]
inherits = *common_vertex*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 20
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:*ABSC_VERTEX*]
inherits = *common_vertex*
bed_temperature = 110
bridge_fan_speed = 25
cooling = 1
disable_fan_first_layers = 4
fan_always_on = 0
fan_below_layer_time = 30
slowdown_below_layer_time = 20
filament_colour = #FFF2EC
filament_max_volumetric_speed = 11
filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 15
min_fan_speed = 15
min_print_speed = 15
temperature = 255
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:*FLEX_VERTEX*]
inherits = *common_vertex*
bed_temperature = 50
bridge_fan_speed = 80
# For now, all but selected filaments are disabled for the MMU 2.0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.15
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #008000
filament_max_volumetric_speed = 1.5
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
start_filament_gcode = "M900 K0"; Filament gcode"
temperature = 240
filament_retract_length = 0.8
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0

[filament:Generic ABS @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.04
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Generic
filament_cost = 25.4
filament_density = 1.24
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Generic
filament_cost = 27.82
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic FLEX @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = Generic
filament_cost = 82
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
compatible_printers_condition = nozzle_diameter[0]>0.35 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic HIPS @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
bridge_fan_speed = 50
cooling = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFFFD7
filament_soluble = 1
filament_type = HIPS
first_layer_temperature = 230
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)


[filament:Prusa PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and num_extruders==1)

[filament:Prusa PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:VERTEX PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = VERTEX
filament_colour = #55cc00
filament_cost = 19.85
filament_density = 1.27
filament_spool_weight = 180
first_layer_temperature = 225
temperature = 230
filament_retract_length = 2
compatible_printers_condition = nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)


[filament:Prusament PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusa PETG @0.6 nozzle VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230

[filament:VERTEX PETG @0.6 nozzle VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = VERTEX
filament_colour = #55cc00
filament_cost = 19.85
filament_density = 1.27
filament_spool_weight = 180
first_layer_temperature = 225
temperature = 230
filament_retract_length = 2

[filament:Prusament PETG @0.6 nozzle @VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = Prusa Polymers
first_layer_temperature = 240
temperature = 250
filament_cost = 36.29
filament_density = 1.27
filament_spool_weight = 201
filament_type = PETG

[filament:Plasty Mladec PETG @0.6 nozzle VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = Plasty Mladec
first_layer_temperature = 230
temperature = 240
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
filament_type = PETG

[filament:Prusa ABS @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Made for Prusa
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament ASA @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = Prusa Polymers
filament_cost = 42.69
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_type = ASA
filament_colour = #FFF2EC
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)


[filament:Prusament PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Prusa Polymers
temperature = 215
filament_cost = 30.24
filament_density = 1.24
filament_spool_weight = 201
filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament PVB @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Prusa Polymers
temperature = 215
bed_temperature = 75
first_layer_bed_temperature = 75
filament_cost = 60.48
filament_density = 1.09
filament_spool_weight = 201
filament_max_volumetric_speed = 8
filament_type = PVB
filament_soluble = 1
filament_colour = #FFFF6F
compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = Prusa Polymers
filament_cost = 60.49 
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
first_layer_temperature = 275
first_layer_bed_temperature = 110
temperature = 275
bed_temperature = 115
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
fan_below_layer_time = 30
filament_type = PC
filament_colour = #DEE0E6
filament_max_volumetric_speed = 8
filament_retract_length = 1
filament_retract_lift = 0.2
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:ColorFabb bronzeFill @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.2
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 9

[filament:ColorFabb steelFill @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.2
filament_cost = 80.65
filament_density = 3.13
filament_spool_weight = 236
filament_colour = #808080
filament_max_volumetric_speed = 8

[filament:ColorFabb copperFill @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.2
filament_cost = 80.65
filament_density = 3.9
filament_spool_weight = 236
filament_colour = #82603E
filament_max_volumetric_speed = 9

[filament:ColorFabb HT @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = ColorFabb
bed_temperature = 110
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 10
filament_cost = 65.66
filament_density = 1.18
filament_spool_weight = 236
first_layer_bed_temperature = 105
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 10
temperature = 270

[filament:ColorFabb PLA-PHA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = ColorFabb
filament_cost = 54.84
filament_density = 1.24
filament_spool_weight = 236

[filament:ColorFabb woodFill @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.15
filament_spool_weight = 236
filament_colour = #dfc287
filament_max_volumetric_speed = 9
first_layer_temperature = 200
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 200
filament_retract_lift = 0.2

[filament:ColorFabb corkFill @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = ColorFabb
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 78.63
filament_density = 1.18
filament_spool_weight = 236
filament_colour = #634d33
filament_max_volumetric_speed = 6
first_layer_temperature = 220
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
filament_retract_lift = 0.2

[filament:ColorFabb XT @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = ColorFabb
filament_cost = 62.90
filament_density = 1.27
filament_spool_weight = 236
first_layer_bed_temperature = 90
first_layer_temperature = 260
temperature = 270

[filament:ColorFabb XT-CF20 @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = ColorFabb
extrusion_multiplier = 1.05
filament_cost = 80.65
filament_density = 1.35
filament_spool_weight = 236
filament_colour = #804040
filament_max_volumetric_speed = 2
first_layer_bed_temperature = 90
first_layer_temperature = 260
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0.4
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:ColorFabb nGen @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = ColorFabb
filament_cost = 52.46
filament_density = 1.2
filament_spool_weight = 236
bridge_fan_speed = 40
fan_always_on = 0
fan_below_layer_time = 10
filament_type = NGEN
first_layer_temperature = 240
max_fan_speed = 35
min_fan_speed = 20

[filament:ColorFabb nGen flex @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = ColorFabb
filament_cost = 58.30
filament_density = 1
filament_spool_weight = 236
bed_temperature = 85
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_below_layer_time = 10
filament_max_volumetric_speed = 5
first_layer_bed_temperature = 85
first_layer_temperature = 260
max_fan_speed = 35
min_fan_speed = 20
temperature = 260
filament_retract_length = nil
filament_retract_lift = 0
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Kimya PETG Carbon @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Kimya
extrusion_multiplier = 1.05
filament_cost = 150.02
filament_density = 1.317
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_bed_temperature = 85
first_layer_temperature = 240
temperature = 240
filament_retract_length = nil
filament_retract_lift = 0.3
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.06{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Kimya ABS Carbon @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Kimya
filament_cost = 140.34
filament_density = 1.032
filament_colour = #804040
filament_max_volumetric_speed = 6
first_layer_temperature = 260
temperature = 260
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Kimya ABS Kevlar @VERTEX]
inherits = Kimya ABS Carbon @VERTEX
filament_vendor = Kimya
filament_density = 1.037

[filament:E3D Edge @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = E3D
filament_cost = 56.9
filament_density = 1.26
filament_type = EDGE
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:E3D PC-ABS @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = E3D
filament_cost = 0
filament_type = PC
filament_density = 1.05
first_layer_temperature = 270
temperature = 270

[filament:Fillamentum PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Fillamentum
filament_cost = 35.48
filament_density = 1.24
filament_spool_weight = 230
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Fillamentum ABS @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = Fillamentum
filament_cost = 32.4
filament_density = 1.04
filament_spool_weight = 230
first_layer_temperature = 240
temperature = 240

[filament:Fillamentum ASA @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = Fillamentum
filament_cost = 38.7
filament_density = 1.07
filament_spool_weight = 230
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
min_print_speed = 15
slowdown_below_layer_time = 15
first_layer_temperature = 265
temperature = 265
filament_type = ASA

[filament:Fillamentum CPE @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Fillamentum
filament_cost = 56.45
filament_density = 1.25
filament_spool_weight = 230
filament_type = CPE
first_layer_bed_temperature = 90
first_layer_temperature = 275
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 3
full_fan_speed_layer = 5
temperature = 275
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum Timberfill @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Fillamentum
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.15
filament_spool_weight = 230
filament_colour = #804040
filament_max_volumetric_speed = 10
first_layer_temperature = 190
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 190
filament_retract_lift = 0.2

[filament:Smartfil Wood @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Smart Materials 3D
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
extrusion_multiplier = 1.1
filament_cost = 68
filament_density = 1.58
filament_colour = #804040
filament_max_volumetric_speed = 9
first_layer_temperature = 220
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 220
filament_retract_lift = 0.2

[filament:Esun ABS @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Esun
filament_cost = 27.82
filament_density = 1.01
filament_spool_weight = 265

[filament:Hatchbox ABS @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Hatchbox
filament_cost = 27.82
filament_density = 1.04
filament_spool_weight = 245

[filament:Plasty Mladec ABS @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Plasty Mladec
filament_cost = 27.82
filament_density = 1.08
filament_spool_weight = 230

[filament:Verbatim ABS @VERTEX]
inherits = *ABSC_VERTEX*
filament_vendor = Verbatim
filament_cost = 25.87
filament_density = 1.05
filament_spool_weight = 235
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Plasty Mladec PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Plasty Mladec
filament_cost = 27.82
filament_density = 1.27
filament_spool_weight = 230
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Devil Design PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.24
filament_spool_weight = 250

[filament:Devil Design PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Devil Design
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90

[filament:Spectrum PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Spectrum
filament_cost = 21.50
filament_density = 1.24

[filament:Fillamentum Flexfill 92A @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = Fillamentum
filament_cost = 33.99
filament_density = 1.20
filament_spool_weight = 230
filament_max_volumetric_speed = 1.2
filament_retract_length = 0
filament_retract_speed = nil
filament_retract_lift = nil
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:SainSmart TPU @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = SainSmart
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 80
min_fan_speed = 80
filament_retract_before_travel = 3
filament_cost = 32.99
filament_density = 1.21
filament_retract_length = 1
filament_retract_speed = nil
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Filatech FilaFlex40 @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = Filatech
fan_always_on = 1
filament_max_volumetric_speed = 2.5
extrusion_multiplier = 1.1
first_layer_temperature = 230
first_layer_bed_temperature = 50
temperature = 230
bed_temperature = 50
bridge_fan_speed = 100
max_fan_speed = 50
min_fan_speed = 50
filament_retract_before_travel = 3
filament_cost = 84.68
filament_density = 1.22
filament_retract_length = 2
filament_retract_speed = 50
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0
disable_fan_first_layers = 4
full_fan_speed_layer = 6
min_print_speed = 15
slowdown_below_layer_time = 10
cooling = 1

[filament:Polymaker PC-Max @VERTEX]
inherits = *ABS_VERTEX*
filament_vendor = Polymaker
filament_cost = 77.3
filament_density = 1.20
filament_type = PC
bed_temperature = 115
filament_colour = #FFF2EC
first_layer_bed_temperature = 100
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 0
filament_max_volumetric_speed = 8

[filament:Verbatim PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Verbatim
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Fiberlogy PETG @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Fiberlogy
filament_cost = 21.50
filament_density = 1.27
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Devil Design PETG @0.6 nozzle VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = Devil Design
first_layer_temperature = 230
first_layer_bed_temperature = 85
temperature = 230
bed_temperature = 90
filament_cost = 20.99
filament_density = 1.23
filament_spool_weight = 250
filament_type = PETG

[filament:Verbatim PETG @0.6 nozzle VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = Verbatim
first_layer_temperature = 230
temperature = 240
filament_cost = 27.90
filament_density = 1.27
filament_spool_weight = 235
filament_type = PETG

[filament:Fiberlogy PETG @0.6 nozzle VERTEX]
inherits = *PET06_VERTEX*
filament_vendor = Fiberlogy
first_layer_temperature = 230
temperature = 240
filament_cost = 21.50
filament_density = 1.27
filament_type = PETG

[filament:Fiberlogy PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Fiberlogy
filament_cost = 25.4
filament_density = 1.24

[filament:Plasty Mladec PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Plasty Mladec
filament_cost = 27.82
filament_density = 1.24
filament_spool_weight = 230

[filament:AmazonBasics PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = AmazonBasics
filament_cost = 25.4
filament_density = 1.24

[filament:Overture PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Overture
filament_cost = 22
filament_density = 1.24
filament_spool_weight = 235

[filament:Hatchbox PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Hatchbox
filament_cost = 25.4
filament_density = 1.27
filament_spool_weight = 245

[filament:Esun PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Esun
filament_cost = 25.4
filament_density = 1.24
filament_spool_weight = 265

[filament:Das Filament PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Das Filament
filament_cost = 25.4
filament_density = 1.24

[filament:EUMAKERS PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = EUMAKERS
filament_cost = 25.4
filament_density = 1.24

[filament:Floreon3D PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Floreon3D
filament_cost = 25.4
filament_density = 1.24

[filament:SemiFlex or Flexfill 98A @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = Generic
filament_cost = 82.26
filament_density = 1.22
filament_max_volumetric_speed = 1.35

[filament:Fillamentum Flexfill 98A @VERTEX]
inherits = *FLEX_VERTEX*
filament_vendor = Fillamentum
filament_cost = 82.26
filament_density = 1.23
filament_spool_weight = 230
filament_max_volumetric_speed = 1.35
fan_always_on = 1
cooling = 0
max_fan_speed = 50
min_fan_speed = 50
disable_fan_first_layers = 4
full_fan_speed_layer = 6

[filament:Taulman Bridge @VERTEX]
inherits = *common_vertex*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.13
bed_temperature = 90
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 7
filament_soluble = 0
filament_type = NYLON
first_layer_bed_temperature = 60
first_layer_temperature = 240
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
temperature = 250

[filament:Fillamentum Nylon FX256 @VERTEX]
inherits = *common_vertex*
filament_vendor = Fillamentum
filament_cost = 56.99
filament_density = 1.01
filament_spool_weight = 230
bed_temperature = 90
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 6
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 20
filament_colour = #DEE0E6
filament_max_volumetric_speed = 6
filament_soluble = 0
filament_type = NYLON
first_layer_bed_temperature = 90
first_layer_temperature = 250
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.1{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K28{elsif nozzle_diameter[0]==0.8};{else}M900 K48{endif} ; Filament gcode LA 1.0"
temperature = 250

[filament:Fiberthree F3 PA Pure Pro @VERTEX]
inherits = *common_vertex*
filament_vendor = Fiberthree
filament_cost = 200.84
filament_density = 1.2
bed_temperature = 70
first_layer_bed_temperature = 75
first_layer_temperature = 270
temperature = 270
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = NYLON
max_fan_speed = 20
min_fan_speed = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Fiberthree F3 PA-CF Pro @VERTEX]
inherits = *common_vertex*
filament_vendor = Fiberthree
filament_cost = 208.1
filament_density = 1.25
bed_temperature = 70
first_layer_bed_temperature = 75
first_layer_temperature = 275
temperature = 275
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
min_print_speed = 15
slowdown_below_layer_time = 10
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_soluble = 0
filament_type = NYLON
max_fan_speed = 0
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
filament_retract_length = 2
filament_retract_speed = 40
filament_retract_lift = nil
filament_retract_before_travel = 1.5
filament_wipe = 0
compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Fiberthree F3 PA-GF Pro @VERTEX]
inherits = Fiberthree F3 PA-CF Pro @VERTEX
filament_vendor = Fiberthree
filament_cost = 205.68
filament_density = 1.27
fan_always_on = 1
max_fan_speed = 15
min_fan_speed = 15

[filament:Taulman T-Glase @VERTEX]
inherits = *PET_VERTEX*
filament_vendor = Taulman
filament_cost = 40
filament_density = 1.27
bridge_fan_speed = 40
cooling = 0
fan_always_on = 0
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 5
min_fan_speed = 0
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Verbatim PLA @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = Verbatim
filament_cost = 42.99
filament_density = 1.24
filament_spool_weight = 235

[filament:Verbatim BVOH @VERTEX]
inherits = *common_vertex*
filament_vendor = Verbatim
filament_cost = 193.58
filament_density = 1.14
filament_spool_weight = 235
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_max_volumetric_speed = 4
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 210

[filament:Verbatim PP @VERTEX]
inherits = *common_vertex*
filament_vendor = Verbatim
filament_cost = 72
filament_density = 0.89
filament_spool_weight = 235
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 2
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #DEE0E6
filament_max_volumetric_speed = 5
filament_type = PP
first_layer_bed_temperature = 100
first_layer_temperature = 220
max_fan_speed = 100
min_fan_speed = 100
start_filament_gcode = "M900 K0 ; Filament gcode"
temperature = 220

[filament:PrimaSelect PVA+ @VERTEX]
inherits = *PLA_VERTEX*
filament_vendor = PrimaSelect
filament_cost = 45.01
filament_density = 1.23
cooling = 0
fan_always_on = 0
filament_colour = #FFFFD7
filament_max_volumetric_speed = 3.8
filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_type = PVA
first_layer_temperature = 195
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 195

[filament:*ABS MMU2 VERTEX*]
inherits = Prusa ABS @VERTEX
compatible_printers_condition = nozzle_diameter[0]!=0.8 and (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
filament_cooling_final_speed = 50 
filament_cooling_initial_speed = 10
filament_cooling_moves = 5
filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6";
filament_loading_speed_start = 19
filament_load_time = 15
filament_unload_time = 12
filament_loading_speed = 14
filament_unloading_speed = 20

[filament:Generic ABS @VERTEXMMU2]
inherits = *ABS MMU2 VERTEX*
filament_vendor = Generic

[filament:Generic HIPS @VERTEXMMU2]
inherits = *ABS MMU2 VERTEX*
filament_vendor = Generic
filament_cost = 27.3
filament_density = 1.04
fan_always_on = 1
first_layer_temperature = 230
first_layer_bed_temperature = 100
temperature = 230
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 50
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 3
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = HIPS
filament_soluble = 1
filament_colour = #FFFFD7
filament_ramming_parameters = "130 120 2.74194 2.96774 3.25806 3.77419 4.83871 6.3871 8.09677 9.64516 10.7419 11.2903| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 7.13871 1.95 10.2806 2.45 11.4194 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.03{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Prusament ASA @VERTEXMMU2]
inherits = *ABS MMU2 VERTEX*
filament_vendor = Prusa Polymers
filament_cost = 35.28
filament_density = 1.07
filament_spool_weight = 201
fan_always_on = 1
first_layer_temperature = 260
first_layer_bed_temperature = 105
temperature = 260
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 15
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_type = ASA
filament_colour = #FFF2EC
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"

[filament:Prusament PC Blend @VERTEXMMU2]
inherits = *ABS MMU2 VERTEX*
filament_vendor = Prusa Polymers
filament_cost = 49.99
filament_density = 1.22
filament_spool_weight = 201
fan_always_on = 0
fan_below_layer_time = 30
first_layer_temperature = 265
first_layer_bed_temperature = 105
temperature = 265
bed_temperature = 110
cooling = 1
min_fan_speed = 20
max_fan_speed = 20
bridge_fan_speed = 30
min_print_speed = 15
slowdown_below_layer_time = 20
disable_fan_first_layers = 4
filament_cooling_final_speed = 2 
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_max_volumetric_speed = 8
filament_retract_length = 1
filament_retract_lift = 0.2
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = PC
filament_colour = #DEE0E6
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0"

[filament:Prusa ABS @VERTEXMMU2]
inherits = *ABS MMU2 VERTEX*
filament_vendor = Made for Prusa
filament_cost = 22.99
filament_spool_weight = 230

[filament:Plasty Mladec ABS @VERTEXMMU2]
inherits = *ABS MMU2 VERTEX*
filament_vendor = Plasty Mladec
filament_density = 1.08
filament_spool_weight = 230

[filament:*PET MMU2 VERTEX*]
inherits = Prusa PETG @VERTEX
compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
temperature = 230
first_layer_temperature = 230
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 120
filament_loading_speed_start = 19
filament_retract_length = 1.4
filament_retract_lift = 0.2

[filament:*PET MMU2 06 VERTEX*]
inherits = *PET MMU2 VERTEX*
compatible_printers_condition = nozzle_diameter[0]==0.6 and (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
filament_max_volumetric_speed = 13

[filament:Generic PETG @VERTEXMMU2]
inherits = *PET MMU2 VERTEX*
filament_vendor = Generic

[filament:Plasty Mladec PETG @VERTEXMMU2]
inherits = *PET MMU2 VERTEX*
filament_vendor = Plasty Mladec
filament_spool_weight = 230

[filament:Prusa PETG @VERTEXMMU2]
inherits = *PET MMU2 VERTEX*
filament_vendor = Made for Prusa
filament_cost = 22.99
filament_spool_weight = 230

[filament:VERTEX PETG @VERTEXMMU2]
inherits = *PET MMU2 VERTEX*
filament_vendor = VERTEX
filament_colour = #55cc00
filament_cost = 19.85
filament_density = 1.27
filament_spool_weight = 180
first_layer_temperature = 225
temperature = 230
filament_retract_length = 2

[filament:Prusament PETG @VERTEXMMU2]
inherits = *PET MMU2 VERTEX*
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 29.99
filament_density = 1.27
filament_spool_weight = 201

[filament:Generic PETG @VERTEXMMU2 0.6 nozzle]
inherits = *PET MMU2 06 VERTEX*
filament_vendor = Generic

[filament:Prusa PETG @VERTEXMMU2 0.6 nozzle]
inherits = *PET MMU2 06 VERTEX*
filament_vendor = Made for Prusa
filament_spool_weight = 230

[filament:VERTEX PETG @VERTEXMMU2 0.6 nozzle]
inherits = *PET MMU2 06 VERTEX*
filament_vendor = VERTEX
filament_colour = #55cc00
filament_cost = 19.85
filament_density = 1.27
filament_spool_weight = 180
first_layer_temperature = 225
temperature = 230
filament_retract_length = 2

[filament:Prusament PETG @VERTEXMMU2 0.6 nozzle]
inherits = *PET MMU2 06 VERTEX*
filament_type = PETG
filament_vendor = Prusa Polymers
filament_cost = 29.99
filament_density = 1.27
filament_spool_weight = 201

[filament:Plasty Mladec PETG @VERTEXMMU2 0.6 nozzle]
inherits = *PET MMU2 06 VERTEX*
filament_type = PETG
filament_vendor = Plasty Mladec
filament_spool_weight = 230

[filament:*PLA MMU2 @VERTEX*]
inherits = Prusa PLA @VERTEX
compatible_printers_condition = nozzle_diameter[0]!=0.8 and (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
temperature = 205
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 3
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_loading_speed_start = 19
filament_minimal_purge_on_wipe_tower = 15
filament_unloading_speed_start = 100
full_fan_speed_layer = 4

[filament:Generic PLA @VERTEXMMU2]
inherits = *PLA MMU2 @VERTEX*
filament_vendor = Generic

[filament:Prusa PLA @VERTEXMMU2]
inherits = *PLA MMU2 @VERTEX*
filament_vendor = Made for Prusa
filament_cost = 20.99
filament_spool_weight = 230

[filament:Prusament PLA @VERTEXMMU2]
inherits = *PLA MMU2 @VERTEX*
filament_vendor = Prusa Polymers
filament_cost = 24.99
filament_density = 1.24
filament_spool_weight = 201

[filament:Prusament PVB @VERTEXMMU2]
inherits = *PLA MMU2 @VERTEX*
filament_vendor = Prusa Polymers
filament_cost = 49.98
filament_density = 1.09
filament_max_volumetric_speed = 8
filament_soluble = 1
filament_type = PVB
filament_colour = #FFFF6F
filament_spool_weight = 201
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.05{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"

[filament:Fillamentum PLA @VERTEXMMU2]
inherits = *PLA MMU2 @VERTEX*
filament_vendor = Fillamentum
filament_cost = 21.99
filament_density = 1.24
filament_spool_weight = 230

[filament:Verbatim BVOH @VERTEXMMU2]
inherits = Verbatim BVOH @VERTEX
filament_vendor = Verbatim
compatible_printers_condition = nozzle_diameter[0]!=0.8 and (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
temperature = 195
fan_always_on = 1
first_layer_temperature = 200
filament_cooling_final_speed = 1
filament_cooling_initial_speed = 2
filament_max_volumetric_speed = 4
filament_type = PVA
filament_cooling_moves = 1
filament_load_time = 15
filament_loading_speed = 14
filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
filament_loading_speed_start = 19

[filament:PrimaSelect PVA+ @VERTEXMMU2]
inherits = *common_vertex*
filament_vendor = PrimaSelect
compatible_printers_condition = (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
bed_temperature = 60
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFFFD7
filament_cooling_final_speed = 2
filament_cooling_initial_speed = 4
filament_cooling_moves = 2
filament_cost = 45.01
filament_density = 1.24
filament_diameter = 1.75
filament_load_time = 15
filament_loading_speed = 14
filament_loading_speed_start = 19
filament_max_volumetric_speed = 3.8
filament_minimal_purge_on_wipe_tower = 15
filament_ramming_parameters = "120 110 3.83871 3.90323 3.96774 4.03226 4.09677 4.19355 4.3871 4.83871 5.67742 6.93548 8.54839 10.3226 11.9677 13.2581 14.129 14.5806| 0.05 3.8258 0.45 3.89676 0.95 4.05807 1.45 4.23548 1.95 5.18386 2.45 7.80651 2.95 11.5356 3.45 13.9872 3.95 14.7613 4.45 7.6 4.95 7.6"
filament_soluble = 1
filament_toolchange_delay = 0
filament_type = PVA
filament_unload_time = 12
filament_unloading_speed = 20
filament_unloading_speed_start = 100
first_layer_bed_temperature = 60
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
temperature = 195

## Filaments 0.8 nozzle

[filament:Generic PLA @0.8 nozzle VERTEX]
inherits = Generic PLA @VERTEX
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic ABS @0.8 nozzle VERTEX]
inherits = Generic ABS @VERTEX
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic PETG @0.8 nozzle VERTEX]
inherits = Generic PETG @VERTEX
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusa PLA @0.8 nozzle VERTEX]
inherits = Prusa PLA @VERTEX
first_layer_temperature = 220
temperature = 220
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusa PETG @0.8 nozzle VERTEX]
inherits = Prusa PETG @VERTEX
first_layer_temperature = 240
temperature = 250
filament_max_volumetric_speed = 20
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:VERTEX PETG @0.8 nozzle VERTEX]
inherits = VERTEX PETG @VERTEX
first_layer_temperature = 235
temperature = 245
filament_max_volumetric_speed = 20
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and (printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and num_extruders==1)


[filament:Prusa ABS @0.8 nozzle VERTEX]
inherits = Prusa ABS @VERTEX
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic FLEX @0.8 nozzle VERTEX]
inherits = Generic FLEX @VERTEX
filament_max_volumetric_speed = 4.3
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and num_extruders==1 and  (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Generic HIPS @0.8 nozzle VERTEX]
inherits = Generic HIPS @VERTEX
first_layer_temperature = 240
temperature = 240
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament PLA @0.8 nozzle VERTEX]
inherits = Prusament PLA @VERTEX
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament PETG @0.8 nozzle VERTEX]
inherits = Prusament PETG @VERTEX
first_layer_temperature = 250
temperature = 260
filament_max_volumetric_speed = 20
filament_retract_lift = 0.2
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament ASA @0.8 nozzle VERTEX]
inherits = Prusament ASA @VERTEX
first_layer_temperature = 265
temperature = 265
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament PC Blend @0.8 nozzle VERTEX]
inherits = Prusament PC Blend @VERTEX
filament_max_volumetric_speed = 13
filament_retract_lift = 0.25
compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)

[filament:Prusament PVB @0.8 nozzle VERTEX]
inherits = Prusament PVB @VERTEX
first_layer_temperature = 225
temperature = 225
filament_max_volumetric_speed = 15
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material)
slowdown_below_layer_time = 20

## Filaments 0.8 nozzle MMU2

[filament:Generic HIPS @VERTEXMMU2 0.8 nozzle]
inherits = Generic HIPS @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material

[filament:Prusament ASA @VERTEXMMU2 0.8 nozzle]
inherits = Prusament ASA @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
slowdown_below_layer_time = 20
filament_max_volumetric_speed = 14

[filament:Prusament PC Blend @VERTEXMMU2 0.8 nozzle]
inherits = Prusament PC Blend @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 12

[filament:Generic PETG @VERTEXMMU2 0.8 nozzle]
inherits = Generic PETG @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Prusament PETG @VERTEXMMU2 0.8 nozzle]
inherits = Prusament PETG @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 18
first_layer_temperature = 240
temperature = 240
slowdown_below_layer_time = 20
filament_ramming_parameters = "120 140 5.51613 5.6129 5.70968 5.77419 5.77419 5.74194 5.80645 5.93548 6.06452 6.19355 6.3871 6.74194 7.25806 7.87097 8.54839 9.22581 10 10.8387| 0.05 5.5032 0.45 5.63868 0.95 5.8 1.45 5.7839 1.95 6.02257 2.45 6.25811 2.95 7.08395 3.45 8.43875 3.95 9.92258 4.45 11.3419 4.95 7.6"

[filament:Generic PLA @VERTEXMMU2 0.8 nozzle]
inherits = Generic PLA @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Prusament PLA @VERTEXMMU2 0.8 nozzle]
inherits = Prusament PLA @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 14
first_layer_temperature = 215
temperature = 210

[filament:Verbatim BVOH @VERTEXMMU2 0.8 nozzle]
inherits = Verbatim BVOH @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

[filament:PrimaSelect PVA+ @VERTEXMMU2 0.8 nozzle]
inherits = PrimaSelect PVA+ @VERTEXMMU2
compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_VENDOR_VERTEX.*/ and printer_notes=~/.*PRINTER_MODEL_(L|XL).*/ and single_extruder_multi_material
filament_max_volumetric_speed = 8

################
### PRINTERS ###
################

[printer:*common_vertex*]
printer_technology = FFF
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
deretract_speed = 0
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 1
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 2000
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.32
min_layer_height = 0.07
max_print_height = 200
nozzle_diameter = 0.4
octoprint_apikey = 
octoprint_host = 
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_VERTEX\nPRINTER_MODEL_XL\n
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 4
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port = 
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = VERTEX_MK3S
printer_variant = 0.4
default_print_profile = 0.15mm OPTIMAL
default_filament_profile = Generic PLA @VERTEX


# XXXXXXXXXXXXXXXXX
# XXX--- XL ---XXX
# XXXXXXXXXXXXXXXXX

[printer:Vertex XL]
inherits = *common_vertex*
end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|@0.25 nozzle VertexXL).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
silent_mode = 1
remaining_times = 1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_VERTEX\nPRINTER_MODEL_XL\n
retract_lift_below = 429
max_print_height = 430
bed_shape = 0x0,300x0,300x300,0x300
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
printer_model = VERTEX_XL
default_print_profile = 0.15mm QUALITY @VERTEX

[printer:Vertex XL 0.25 nozzle]
inherits = Vertex XL
nozzle_diameter = 0.25
max_layer_height = 0.2
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle XL.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX

[printer:Vertex XL 0.6 nozzle]
inherits = Vertex XL
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX

[printer:Vertex XL 0.8 nozzle]
inherits = Vertex XL
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
default_filament_profile = Prusament PLA @0.8 nozzle VERTEX

##################
#### XL MMU2S ####
##################

[printer:*xlmm2s*]
inherits = Vertex XL
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 3
extra_loading_move = -25
printer_model = VERTEX_XLMMU2S
default_print_profile = 0.15mm QUALITY @VERTEX
default_filament_profile = Prusament PLA @VERTEXMMU2

[printer:Vertex XL MMU2S Single]
inherits = *xlmm2s*
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA @VERTEX
printer_model = VERTEX_XLMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|@0.25 nozzle VERTEX).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors

[printer:Vertex XL MMU2S Single 0.6 nozzle]
inherits = Vertex XL MMU2S Single
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.15
printer_variant = 0.6
printer_model = VERTEX_XLMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX

[printer:Vertex XL MMU2S Single 0.8 nozzle]
inherits = Vertex XL MMU2S Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
printer_model = VERTEX_XLMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
default_filament_profile = Prusament PLA @0.8 nozzle VERTEX

[printer:Vertex XL MMU2S Single 0.25 nozzle]
inherits = Vertex XL MMU2S Single
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.2
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
printer_model = VERTEX_XLMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n
default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX

[printer:Vertex XL MMU2S]
inherits = *xlmm2s*
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
printer_model = VERTEX_XLMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n

## 0.6mm nozzle MMU2/S printer profiles

[printer:Vertex XL MMU2S 0.6 nozzle]
inherits = Vertex XL MMU2S
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.48
min_layer_height = 0.15
printer_variant = 0.6
printer_model = VERTEX_XLMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX

# XXXXXXXXXXXXXXXXX
# XXX---- L ----XXX
# XXXXXXXXXXXXXXXXX

[printer:Vertex L]
inherits = *common_vertex*
end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|@0.25 nozzle VertexXL).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 4.5,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
silent_mode = 1
remaining_times = 1
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_VERTEX\nPRINTER_MODEL_L\n
retract_lift_below = 229
max_print_height = 230
bed_shape = 0x0,300x0,300x300,0x300
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
printer_model = VERTEX_L
default_print_profile = 0.15mm QUALITY @VERTEX

[printer:Vertex L 0.25 nozzle]
inherits = Vertex L
nozzle_diameter = 0.25
max_layer_height = 0.2
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle XL.*/}M907 E430 ; set extruder motor current{endif}
default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX

[printer:Vertex L 0.6 nozzle]
inherits = Vertex L
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.15
printer_variant = 0.6
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX

[printer:Vertex L 0.8 nozzle]
inherits = Vertex L
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
default_filament_profile = Prusament PLA @0.8 nozzle VERTEX

##################
#### L MMU2S ####
##################

[printer:*lmm2s*]
inherits = Vertex L
single_extruder_multi_material = 1
cooling_tube_length = 20
cooling_tube_retraction = 40
parking_pos_retraction = 85
retract_length_toolchange = 3
extra_loading_move = -25
printer_model = VERTEX_LMMU2S
default_print_profile = 0.15mm QUALITY @VERTEX
default_filament_profile = Prusament PLA @VERTEXMMU2

[printer:Vertex L MMU2S Single]
inherits = *lmm2s*
single_extruder_multi_material = 0
default_filament_profile = Prusament PLA @VERTEX
printer_model = VERTEX_LMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|@0.25 nozzle VERTEX).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors

[printer:Vertex L MMU2S Single 0.6 nozzle]
inherits = Vertex L MMU2S Single
single_extruder_multi_material = 0
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.15
printer_variant = 0.6
printer_model = VERTEX_LMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX

[printer:Vertex L MMU2S Single 0.8 nozzle]
inherits = Vertex L MMU2S Single 0.6 nozzle
single_extruder_multi_material = 0
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.2
printer_variant = 0.8
retract_length = 1
printer_model = VERTEX_LMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
default_filament_profile = Prusament PLA @0.8 nozzle VERTEX

[printer:Vertex L MMU2S Single 0.25 nozzle]
inherits = Vertex L MMU2S Single
single_extruder_multi_material = 0
nozzle_diameter = 0.25
max_layer_height = 0.2
min_layer_height = 0.05
printer_variant = 0.25
retract_lift = 0.15
printer_model = VERTEX_LMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.
default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX

[printer:Vertex L MMU2S]
inherits = *lmm2s*
machine_max_acceleration_e = 8000,8000
nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
printer_model = VERTEX_LMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors

## 0.6mm nozzle MMU2/S printer profiles

[printer:Vertex L MMU2S 0.6 nozzle]
inherits = Vertex L MMU2S
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
max_layer_height = 0.48
min_layer_height = 0.15
printer_variant = 0.6
printer_model = VERTEX_LMMU2S
start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.2 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX