v2.2.0v2.2.0

* (Add) FDG file format for Voxelab Printers (ezrec/uv3dp#129)
* (Add) PrusaSlicer printer: Voxelab Ceres 8.9
* (Change) Print time display to hours and minutes: 00h00m

3 files changed, 41 insertions, 4 deletions

diff --git a/PrusaSlicer/printer/Voxelab Ceres 8.9.ini b/PrusaSlicer/printer/Voxelab Ceres 8.9.ini
new file mode 100644
index 0000000..20e560d
--- /dev/null
+++ b/PrusaSlicer/printer/Voxelab Ceres 8.9.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-09 at 22:10:08 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 3840
+display_pixels_y = 2400
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 200
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_VOXELAB\nPRINTER_MODEL_CERES_8.9\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_60\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nFORMAT_FDG\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Voxelab Polaris.ini b/PrusaSlicer/printer/Voxelab Polaris 5.5.ini
index 760a68a..7015849 100644
--- a/PrusaSlicer/printer/Voxelab Polaris.ini
+++ b/PrusaSlicer/printer/Voxelab Polaris 5.5.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-10-01 at 01:27:58 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-09 at 22:08:12 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -25,7 +25,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_VOXELAB\nPRINTER_MODEL_POLARIS\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_VOXELAB\nPRINTER_MODEL_POLARIS_5.5\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nFORMAT_FDG\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
diff --git a/PrusaSlicer/printer/Voxelab Proxima.ini b/PrusaSlicer/printer/Voxelab Proxima 6.ini
index f661138..1c6e5d9 100644
--- a/PrusaSlicer/printer/Voxelab Proxima.ini
+++ b/PrusaSlicer/printer/Voxelab Proxima 6.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-10-01 at 03:18:23 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-09 at 22:08:28 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -25,7 +25,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_VOXELAB\nPRINTER_MODEL_PROXIMA\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_VOXELAB\nPRINTER_MODEL_PROXIMA_6\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nFORMAT_FDG\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default