v1.3.1v1.3.1

* (Add) File format: PWX (AnyCubic Photon X) (#93)
* (Add) File format: PWMO (AnyCubic Photon Mono) (#93)
* (Add) File format: PWMS (AnyCubic Photon Mono SE) (#93)
* (Add) PrusaSlicer printer: AnyCubic Photon X
* (Add) PrusaSlicer printer: AnyCubic Photon Mono
* (Add) PrusaSlicer printer: AnyCubic Photon Mono SE
* (Add) PrusaSlicer printer: AnyCubic Photon Mono X
* (Change) "Save as" file filter dialog with better file extension description
* (Fix) Tool - Infill: Allow save profiles
* (Fix) Material cost was showing as ml instead of currency

4 files changed, 148 insertions, 0 deletions

diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini b/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini
new file mode 100644
index 0000000..801bf75
--- /dev/null
+++ b/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-15 at 17:22:57 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 130.56
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 1620
+display_pixels_y = 2560
+display_width = 82.62
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 160
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_SE\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0.5\nBottomLightOffDelay_2\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono X.ini b/PrusaSlicer/printer/AnyCubic Photon Mono X.ini
new file mode 100644
index 0000000..24333d0
--- /dev/null
+++ b/PrusaSlicer/printer/AnyCubic Photon Mono X.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-15 at 17:27:21 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 3840
+display_pixels_y = 2400
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 245
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_X\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0.5\nBottomLightOffDelay_2\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono.ini b/PrusaSlicer/printer/AnyCubic Photon Mono.ini
new file mode 100644
index 0000000..9d7c45d
--- /dev/null
+++ b/PrusaSlicer/printer/AnyCubic Photon Mono.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-15 at 17:22:43 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 130.56
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 1620
+display_pixels_y = 2560
+display_width = 82.62
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 165
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0.5\nBottomLightOffDelay_2\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/AnyCubic Photon X.ini b/PrusaSlicer/printer/AnyCubic Photon X.ini
new file mode 100644
index 0000000..6ac2568
--- /dev/null
+++ b/PrusaSlicer/printer/AnyCubic Photon X.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-11-15 at 17:25:52 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 2560
+display_pixels_y = 1600
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 245
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_X\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0.5\nBottomLightOffDelay_2\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480