Repair Layers to toolwindow

2 files changed, 74 insertions, 0 deletions

diff --git a/PrusaSlicer/printer/Longer Orange 10.ini b/PrusaSlicer/printer/Longer Orange 10.ini
new file mode 100644
index 0000000..7838689
--- /dev/null
+++ b/PrusaSlicer/printer/Longer Orange 10.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-09-10 at 15:48:09 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,98.64x0,98.64x55.44,0x55.44
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 55.44
+display_mirror_x = 0
+display_mirror_y = 1
+display_orientation = portrait
+display_pixels_x = 854
+display_pixels_y = 480
+display_width = 98.64
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 140
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_LONGER\nPRINTER_MODEL_ORANGE10\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_1\nBottomLightOffDelay_1\nBottomLiftHeight_4\nLiftHeight_2\nBottomLiftSpeed_90\nLiftSpeed_150\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Longer Orange 30.ini b/PrusaSlicer/printer/Longer Orange 30.ini
new file mode 100644
index 0000000..22dd691
--- /dev/null
+++ b/PrusaSlicer/printer/Longer Orange 30.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-09-10 at 15:36:45 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,120.96x0,120.96x68.04,0x68.04
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 68.04
+display_mirror_x = 0
+display_mirror_y = 1
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1440
+display_width = 120.96
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 170
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_LONGER\nPRINTER_MODEL_ORANGE30\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_1\nBottomLightOffDelay_1\nBottomLiftHeight_4\nLiftHeight_2\nBottomLiftSpeed_90\nLiftSpeed_150\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480