Create EPAX X1.ini

1 files changed, 37 insertions, 0 deletions

diff --git a/PrusaSlicer/printer/EPAX X1.ini b/PrusaSlicer/printer/EPAX X1.ini
new file mode 100644
index 0000000..45c1d40
--- /dev/null
+++ b/PrusaSlicer/printer/EPAX X1.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-12 at 18:36:19 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,115x0,115x65,0x65
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 68.04
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1440
+display_width = 120.96
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 155
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_EPAX\nPRINTER_MODEL_X1\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_0\nBottomLiftHeight_5\nBottomLiftSpeed_60\nLiftHeight_5\nLiftingSpeed_60\nRetractSpeed_150\nBottomLightOffDelay_2\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480