diff options
| author | Tiago Conceição <Tiago_caza@hotmail.com> | 2020-12-04 04:00:37 +0300 |
|---|---|---|
| committer | Tiago Conceição <Tiago_caza@hotmail.com> | 2020-12-04 04:00:37 +0300 |
| commit | 5c5670f0b123c98ec2a343caf84fa0a96fd2eac1 (patch) | |
| tree | 58d58283b16542a334a31932af80de82730ed895 /PrusaSlicer | |
| parent | 7a5c9061ed3bb50b074fc516909774fc391631e3 (diff) | |
v1.3.5v1.3.5
* (Add) Pixel Dimming: Chamfer - Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer (#106)
* (Add) PrusaSlicer print profiles: 0.01, 0.02, 0.03, 0.04, 0.15, 0.2
* (Change) Morph: "Fade" to "Chamfer" naming, created profiles need redo
* (Change) Pixel Dimming: Allow start with 0px walls when using "Walls Only"
* (Change) PrusaSlicer print profiles names, reduced bottom layers and raft height
* (Remove) PrusaSlicer print profiles with 3 digit z precision (0.025 and 0.035)
* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats, where 4 offsets (16 bytes) were missing on preview image, leading to wrong table size. Previous converted files with UVtools wont open from now on, you need to reconvert them. (ezrec/uv3dp#124)
* (Fix) Unable to run Re-Height tool due a rounding problem on some cases (#101)
* (Fix) Layer preview end with exception when no per layer settings are available (SL1 case)
Diffstat (limited to 'PrusaSlicer')
16 files changed, 378 insertions, 26 deletions
diff --git a/PrusaSlicer/sla_print/Universal 0.025 UltraDetail - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.01 - Heavy Supports.ini index b50c910..f488711 100644 --- a/PrusaSlicer/sla_print/Universal 0.025 UltraDetail - Heavy Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.01 - Heavy Supports.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:37:18 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:44 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = @@ -8,7 +8,7 @@ hollowing_enable = 0 hollowing_min_thickness = 3 hollowing_quality = 0.5 inherits = 0.025 UltraDetail -layer_height = 0.025 +layer_height = 0.01 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 pad_around_object = 0 pad_around_object_everywhere = 0 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.025 UltraDetail - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.01 - Medium Supports.ini index ed59379..9601136 100644 --- a/PrusaSlicer/sla_print/Universal 0.025 UltraDetail - Medium Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.01 - Medium Supports.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:36:13 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:52 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = @@ -8,7 +8,7 @@ hollowing_enable = 0 hollowing_min_thickness = 3 hollowing_quality = 0.5 inherits = 0.025 UltraDetail -layer_height = 0.025 +layer_height = 0.01 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 pad_around_object = 0 pad_around_object_everywhere = 0 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.02 - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.02 - Heavy Supports.ini new file mode 100644 index 0000000..4ea1a87 --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.02 - Heavy Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:51:04 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 6 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.025 UltraDetail +layer_height = 0.02 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 1 +support_head_penetration = 0.6 +support_head_width = 2 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.5 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.02 - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.02 - Medium Supports.ini new file mode 100644 index 0000000..687dcce --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.02 - Medium Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:50:13 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 6 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.025 UltraDetail +layer_height = 0.02 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 0.8 +support_head_penetration = 0.4 +support_head_width = 2 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.2 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.035 Detail - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.03 - Heavy Supports.ini index a46b970..328c178 100644 --- a/PrusaSlicer/sla_print/Universal 0.035 Detail - Heavy Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.03 - Heavy Supports.ini @@ -1,14 +1,14 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:34:54 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:05 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = -faded_layers = 10 +faded_layers = 4 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 hollowing_quality = 0.5 inherits = 0.035 Detail -layer_height = 0.035 +layer_height = 0.03 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 pad_around_object = 0 pad_around_object_everywhere = 0 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.035 Detail - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.03 - Medium Supports.ini index fa0c748..0d6956f 100644 --- a/PrusaSlicer/sla_print/Universal 0.035 Detail - Medium Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.03 - Medium Supports.ini @@ -1,14 +1,14 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:34:31 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:52:15 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = -faded_layers = 10 +faded_layers = 4 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 hollowing_quality = 0.5 inherits = 0.035 Detail -layer_height = 0.035 +layer_height = 0.03 output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 pad_around_object = 0 pad_around_object_everywhere = 0 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.04 - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.04 - Heavy Supports.ini new file mode 100644 index 0000000..083e3d8 --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.04 - Heavy Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:53:43 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 4 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.05 Normal +layer_height = 0.04 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 1 +support_head_penetration = 0.6 +support_head_width = 3 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.5 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.04 - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.04 - Medium Supports.ini new file mode 100644 index 0000000..ffcc1ff --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.04 - Medium Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:53:55 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 4 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.05 Normal +layer_height = 0.04 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 0.8 +support_head_penetration = 0.4 +support_head_width = 3 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.2 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.05 Normal - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.05 - Heavy Supports.ini index 10e334d..8acc0c9 100644 --- a/PrusaSlicer/sla_print/Universal 0.05 Normal - Heavy Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.05 - Heavy Supports.ini @@ -1,8 +1,8 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:24:57 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:54:04 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = -faded_layers = 10 +faded_layers = 3 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.05 Normal - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.05 - Medium Supports.ini index 79511c7..8db1a15 100644 --- a/PrusaSlicer/sla_print/Universal 0.05 Normal - Medium Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.05 - Medium Supports.ini @@ -1,8 +1,8 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:23:55 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:54:10 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = -faded_layers = 10 +faded_layers = 3 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.1 Fast - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.10 - Heavy Supports.ini index 825330a..99826a8 100644 --- a/PrusaSlicer/sla_print/Universal 0.1 Fast - Heavy Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.10 - Heavy Supports.ini @@ -1,8 +1,8 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-06-11 at 02:30:54 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:55:43 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = -faded_layers = 10 +faded_layers = 3 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.1 Fast - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.10 - Medium Supports.ini index c43832c..675a61b 100644 --- a/PrusaSlicer/sla_print/Universal 0.1 Fast - Medium Supports.ini +++ b/PrusaSlicer/sla_print/Universal 0.10 - Medium Supports.ini @@ -1,8 +1,8 @@ -# generated by PrusaSlicer 2.2.0+win64 on 2020-09-05 at 15:51:14 UTC +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:55:50 UTC compatible_printers = compatible_printers_condition = default_sla_print_profile = -faded_layers = 10 +faded_layers = 3 hollowing_closing_distance = 2 hollowing_enable = 0 hollowing_min_thickness = 3 @@ -21,7 +21,7 @@ pad_object_connector_width = 0.5 pad_object_gap = 1 pad_wall_height = 0 pad_wall_slope = 90 -pad_wall_thickness = 1 +pad_wall_thickness = 0.4 sla_print_settings_id = slice_closing_radius = 0.005 support_base_diameter = 3 diff --git a/PrusaSlicer/sla_print/Universal 0.15 - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.15 - Heavy Supports.ini new file mode 100644 index 0000000..acdf018 --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.15 - Heavy Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:57:42 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 3 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.1 Fast +layer_height = 0.15 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 1 +support_head_penetration = 0.7 +support_head_width = 3 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.5 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.15 - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.15 - Medium Supports.ini new file mode 100644 index 0000000..5a6b036 --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.15 - Medium Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:57:49 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 3 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.1 Fast +layer_height = 0.15 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 0.9 +support_head_penetration = 0.5 +support_head_width = 3 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.3 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.20 - Heavy Supports.ini b/PrusaSlicer/sla_print/Universal 0.20 - Heavy Supports.ini new file mode 100644 index 0000000..bd5f3b4 --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.20 - Heavy Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:58:16 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 3 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.1 Fast +layer_height = 0.2 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 1 +support_head_penetration = 0.7 +support_head_width = 3 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.5 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 diff --git a/PrusaSlicer/sla_print/Universal 0.20 - Medium Supports.ini b/PrusaSlicer/sla_print/Universal 0.20 - Medium Supports.ini new file mode 100644 index 0000000..4996e9f --- /dev/null +++ b/PrusaSlicer/sla_print/Universal 0.20 - Medium Supports.ini @@ -0,0 +1,44 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-11-29 at 22:58:26 UTC +compatible_printers = +compatible_printers_condition = +default_sla_print_profile = +faded_layers = 3 +hollowing_closing_distance = 2 +hollowing_enable = 0 +hollowing_min_thickness = 3 +hollowing_quality = 0.5 +inherits = 0.1 Fast +layer_height = 0.2 +output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1 +pad_around_object = 0 +pad_around_object_everywhere = 0 +pad_brim_size = 1.6 +pad_enable = 1 +pad_max_merge_distance = 50 +pad_object_connector_penetration = 0.3 +pad_object_connector_stride = 10 +pad_object_connector_width = 0.5 +pad_object_gap = 1 +pad_wall_height = 0 +pad_wall_slope = 90 +pad_wall_thickness = 0.4 +sla_print_settings_id = +slice_closing_radius = 0.005 +support_base_diameter = 3 +support_base_height = 1 +support_base_safety_distance = 1 +support_buildplate_only = 0 +support_critical_angle = 45 +support_head_front_diameter = 0.9 +support_head_penetration = 0.5 +support_head_width = 3 +support_max_bridge_length = 10 +support_max_bridges_on_pillar = 3 +support_max_pillar_link_distance = 10 +support_object_elevation = 5 +support_pillar_connection_mode = zigzag +support_pillar_diameter = 1.3 +support_pillar_widening_factor = 0 +support_points_density_relative = 100 +support_points_minimal_distance = 1 +supports_enable = 1 |