1 files changed, 41 insertions, 0 deletions
diff --git a/PrusaSlicer/printer/AnyCubic Photon M3.ini b/PrusaSlicer/printer/AnyCubic Photon M3.ini
new file mode 100644
index 0000000..09cc39b
--- /dev/null
+++ b/PrusaSlicer/printer/AnyCubic Photon M3.ini
@@ -0,0 +1,41 @@
+# generated by PrusaSlicer 2.4.1+win64 on 2022-04-11 at 16:25:49 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,163.84x0,163.84x102.4,0x102.4
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 102.4
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 4096
+display_pixels_y = 2560
+display_width = 163.84
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+host_type = octoprint
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 180
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_M3\nFILEVERSION_516\nFILEFORMAT_PM3\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480