diff options
Diffstat (limited to 'PrusaSlicer/printer/Longer Orange 120.ini')
| -rw-r--r-- | PrusaSlicer/printer/Longer Orange 120.ini | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/PrusaSlicer/printer/Longer Orange 120.ini b/PrusaSlicer/printer/Longer Orange 120.ini new file mode 100644 index 0000000..b29b1f7 --- /dev/null +++ b/PrusaSlicer/printer/Longer Orange 120.ini @@ -0,0 +1,38 @@ +# generated by PrusaSlicer 2.3.1+win64 on 2021-06-26 at 11:55:17 UTC +absolute_correction = 0 +area_fill = 50 +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,68.04x0,68.04x120.96,0x120.96 +default_sla_material_profile = Prusa Orange Tough 0.05 +default_sla_print_profile = 0.05 Normal +display_height = 120.96 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = landscape +display_pixels_x = 1440 +display_pixels_y = 2560 +display_width = 68.04 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 5 +gamma_correction = 1 +host_type = octoprint +inherits = Original Prusa SL1 +max_exposure_time = 120 +max_initial_exposure_time = 300 +max_print_height = 150 +min_exposure_time = 1 +min_initial_exposure_time = 1 +print_host = +printer_model = SL1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_LONGER\nPRINTER_MODEL_ORANGE120\nFILEFORMAT_LGS120\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_4\nLiftHeight_4\nBottomLiftSpeed_90\nLiftSpeed_150\nEND_CUSTOM_VALUES +printer_settings_id = +printer_technology = SLA +printer_variant = default +printer_vendor = +printhost_apikey = +printhost_cafile = +relative_correction = 1,1 +slow_tilt_time = 8 +thumbnails = 400x400,800x480 |