diff options
Diffstat (limited to 'PrusaSlicer/printer/QIDI Shadow6.0 Pro.ini')
| -rw-r--r-- | PrusaSlicer/printer/QIDI Shadow6.0 Pro.ini | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/PrusaSlicer/printer/QIDI Shadow6.0 Pro.ini b/PrusaSlicer/printer/QIDI Shadow6.0 Pro.ini new file mode 100644 index 0000000..a6332b6 --- /dev/null +++ b/PrusaSlicer/printer/QIDI Shadow6.0 Pro.ini @@ -0,0 +1,37 @@ +# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 21:12:51 UTC +absolute_correction = 0 +area_fill = 50 +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,132.48x0,132.48x74.52,0x74.52 +default_sla_material_profile = Prusa Orange Tough 0.05 +default_sla_print_profile = 0.05 Normal +display_height = 74.52 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = portrait +display_pixels_x = 2560 +display_pixels_y = 1440 +display_width = 132.48 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 5 +gamma_correction = 1 +inherits = Original Prusa SL1 +max_exposure_time = 120 +max_initial_exposure_time = 300 +max_print_height = 150 +min_exposure_time = 1 +min_initial_exposure_time = 1 +print_host = +printer_model = SL1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_QIDI\nPRINTER_MODEL_SHADOW6.0PRO\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_80\nLiftHeight_5\nBottomLiftSpeed_100\nLiftingSpeed_65\nRetractSpeed_65\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_settings_id = +printer_technology = SLA +printer_variant = default +printer_vendor = +printhost_apikey = +printhost_cafile = +relative_correction = 1,1 +slow_tilt_time = 8 +thumbnails = 400x400,800x480 |