| Age | Commit message (Collapse) | Author |
|---|
|
- **Command line arguments:**
- (Add) Convert files: UVtools.exe -c \<inputfile\> \<outputfile1/ext1\> [outputfile2/ext2]
- (Add) Extract files: UVtools.exe -e \<inputfile\> [output_folder]
- https://github.com/sn4k3/UVtools#command-line-arguments
- **File formats:**
- (Add) Implement TSMC (Two Stage Motor Control) for the supported formats
- (Add) Implement 'Bottom retract speed' for the supported formats
- (Add) LGS: Support for lgs120 and lg4k (#218)
- (Add) CTB: Special/virtual file extensions .v2.ctb, .v3.ctb, .v4.ctb to force a convertion to the set version (2 to 4). The .ctb is Version 3 by default when creating/converting files
- (Improvement) Better performance for file formats that decode images in sequential pixels groups
- **GCode:**
- (Improvement) Better parsing of the movements / lifts
- (Improvement) Better handling of lifts performed after cure the layer
- (Improvement) More fail-safe checks and sanitize of gcode while parsing
- (Improvement) CTBv3: Enable per layer settings if disabled when fast save without reencode
- (Upgrade) .NET from 5.0.8 to 5.0.9
- (Fix) PrusaSlicer printer: Longer Orange 4k with correct resolution and display size
- (Fix) Odd error when changing properties too fast in multi-thread
|
|
- **(Add) PrusaSlicer printers:**
- Creality HALOT-MAX CL-133
- Nova3D Elfin2
- Nova3D Elfin2 Mono SE
- Nova3D Elfin3 Mini
- Nova3D Bene4
- Nova3D Bene5
- Nova3D Whale
- Nova3D Whale2
- **About box:**
- (Add) Runtime information
- (Fix) Limit panels width and height to not overgrow
- **(Fix) macOS:**
- macOS version auto-upgrade (Will only work on future releases and if running v2.16.0 or greater)
- Demo file not loading
- Auto disable windows scaling factor when on Monjave or greater on new instalations
- (Add) Tool: Raise platform on print finish
- (Add) CXDLP: Support for Halot MAX CL-133
- (Improvement) Tools: Better handling/validation of tools that are unable to run with abstraction
- (Improvement) CWS: Simplify filenames inside the archive
- (Upgrade) EmguCV from 4.5.2 to 4.5.3
- (Change) Allow to set layer `LightPWM` to 0
- (Fix) Arrange dropdown arrow from layer image save icon to be at center
|
|
- **(Improvement) CWS:**
- Remove light-off delay from the format
- Sync movements with a delay time
- Auto convert the light-off delay time to wait before cure time when required
- **(Improvement) CTB:**
- When positively set the 'Wait time before cure' property on a CTBv3 or lower, it will compute the right light-off delay with that extra time into consideration
- When positively set any of the light-off delays on a CTBv4 it will auto zero the 'Wait times' properties and vice-versa
- Automation to set light-off delay on file load, will no longer do when any of 'Wait times' are defined for a CTBv4
- (Improvement) PrusaSlicer printers that use .cws format, implement the wait times on printer notes
- (Fix) GCode parser: Commented commands were being parsed
- (Fix) Exposure time information on bottom status bar was inverted, showing normal/bottom time instead of bottom/normal
- (Fix) macOS: Installing libusb is no longer a requirement
|
|
- **File formats:**
- (Add) Wait time before cure: The time to rest/wait in seconds before cure a new layer
- (Add) Wait time before after: The time to rest/wait in seconds after cure a new layer
- (Add) Wait time after lift: The time to rest/wait in seconds after a lift/peel move
- (Change) All gcode file formats dropped light-off delay field in favor of new 'Wait time before cure' field, setting light-off delay still valid but it redirects to the new field
- (Change) Reorder 'Light-off delay' before 'Exposure time'
- (Improvement) Recalculate the print time when a related property changes
- (Fix) Generic time estimation calculation was ignoring exposure times
- (Fix) Unable to load files with uppercase extensions
- (Fix) ZIP: Use G1 at end of gcode instead of G0
- (Fix) CWS: Use G1 for movements
- **(Fix) CXDLP:** (#240)
- Layer area calculation
- Validation checksum
- **(Fix) ZCODE:**
- Use G1 at end of gcode instead of G0 to prevent crash to top bug on firmware
- Put back the M18 motors off at end of gcode
- **GCode Builder/Parser:**
- (Add) Allow to choose between G0 and G1 for layer movements and end gcode
- (Fix) Safe guard: If the total print height is larger than set machine Z, do not raise/lower print on completeness
- (Fix) Light-off delay is the real delay time and not the calculated movement of the lifts plus the extra time
- (Improvement) Parse gcode line by line instead searching on a group of layers to allow a better control and identification
- **Tools:**
- **Change print parameters:**
- (Add) Tooltips to labels
- (Add) Sun UTF-8 to the Light PWM value unit to describe intensity
- (Improvement) Dynamic lifts: Round lift height and speed to 1 decimal
- (Fix) Exposure time finder: Time estimation when using 'Use different settings for layers with same Z positioning'
- **Prusa Slicer:**
- (Add) Note keyword: BottomWaitBeforeCure_xxx
- (Add) Note keyword: WaitBeforeCure_xxx
- (Add) Note keyword: BottomWaitAfterCure_xxx
- (Add) Note keyword: WaitAfterCure_xxx
- (Add) Note keyword: BottomWaitAfterLift_xxx
- (Add) Note keyword: WaitAfterLift_xxx
- (Change) Uniz IBEE: Remove light-off delay and implement wait time keywords
- **macOS:** (#236)
- (Remove) osx legacy packages from build and downloads
- (Fix) macOS: Simplify the libcvextern.dylib and remove libtesseract dependency
- (Fix) macOS: Include libusb-1.0.0.dylib
- Note: `brew install libusb` still required
- **UI:**
- (Fix) Refresh gcode does not update text on UI for ZIP, CWS, ZCODEX files
- (Fix) Operations: Import a .uvtop file by drag and drop into the UI would not load the layer range
- (Change) When convert a file, the result dialog will have Yes, No and Cancel actions, where No will open the converted file on current window, while Cancel will not perform any action (The old No behaviour)
|
|
- **File Formats:**
- (Add) SL1S: Prusa SL1S Speed
- (Add) CTB v4 support (318570758)
- (Improvement) PHOTON, CBDDLP, CTB v2, PHZ: Disallow per layer settings, beside the format support, printers never use it
- (Improvement) Longer Orange format with new found keys
- (Improvement) CXDLP: Fix the resolution from CL-60 and trigger an error when a invalid resolution was set and unable to detect the printer model
- **Prusa Slicer:**
- (Add) UVtools Prusa SL1S SPEED
- (Add) Longer Orange 120
- (Fix) Creality HALOT-ONE CL-60: Flip resolution & display and remove mirror
- (Fix) Creality HALOT-SKY CL-89: Remove mirror
- (Improvement) Longer Orange printers with better default settings
- (Add) Button on `Help - Sponsor`: Open github sponsor webpage
|
|
- **File formats:**
- (Add) CXDLP v2
- (Improved) GR1, MDLP, CXDLP decode and encode performance and memory optimization
- (Remove) CXDLP v1 from available formats
- (Add) Pixel editor - Drawing: New brushes of shapes/polygons
- (Upgrade) .NET from 5.0.6 to 5.0.7
- (Fix) When there are issues on the list, executing any operation will navigate to the last layer
- (Fix) PrusaSlicer printer: Rename "Creality HALOT-SKY CL-60" to "Creality HALOT-ONE CL-60"
|
|
- (Upgrade) AvaloniaUI from 0.10.2 to 0.10.3
- (Change) PrusaSlicer printers: Set 'Light-Off Delay' and 'Bottom Light-Off Delay' to 0 as default to allow UVtools auto-compute the right value once open the file in
- **Exposure time finder:**
- Optimize layers by merge same position/exposure layers
- Add a fence option to the zebra bars
- Add a option to pattern the loaded model and generate multiple exposures on that
- Allow to generate tests without the holes feature
- Prevent from using more chamfers than the base height
- Removed two of the largest holes
- Hide not so often used 'Multiple brightness' and 'Multiple layer height' by default
- Disable Anti-Aliasing by default
- Change 'Part margin' from 1.5mm to 2.0mm
- Change 'Multiple exposures - Bottom exposure step' default to 0
- Fix a error when generating tests with multiple exposures
- Fix some typos
- **XYZ accuracy test:**
- Change 'Wall thickess' default from 2.5mm to 3.0mm
- (Improvement) Allow compute print time without a lift sequence
|
|
- (Upgrade) AvaloniaUI from 0.10 to 0.10.2
- (Remove) Unused assemblies
- **Issues**
- Improve the performance when loading big lists of issues into the DataGrid
- Auto refresh issues on the vertical highlight tracker once cath a modification on the Issues list
- **Layer preview - Difference:**
- Layer difference will now only check the pixels inside the union of previous, current and next layer bounding rectangle, increasing the performance and speed
- Previous and next layer pixels if both exists was not showing with the configured color and using the next layer color instead
- Respect Anti-Aliasing pixels and fade colors accordingly
- Unlock the possiblity of using the layer difference on first and last layer
- Add a option to show similar pixels instead of the difference
- Change previous default color from (255, 0, 255) to (81, 131, 82) for better depth preception
- Change next default color from (0, 255, 255) to (81, 249, 252) for better depth preception
- Change previous & next default color from (255, 0, 0) to (246, 240, 216) for better depth preception
- **(Fix) Pixel editor:**
- Modification was append instead of prepend on the list
- Modification was not updating the index number on the list
- (Fix) PrusaSlicer printer: Bene4 Mono screen, bed and height size
|
|
* **File formats:**
* Add Voxeldance Tango (VDT)
* Add Makerbase MKS-DLP (MDLPv1)
* Add GR1 Workshop (GR1)
* Add Creality CXDLP (CXDLP)
* When decoding a file and have a empty resolution (Width: 0 or Height: 0) it will auto fix it by get and set the first layer image resolution to the file
* Fix when decoding a file it was already set to require a full encode, preventing fast saves on print parameters edits
* **GUI:**
* When file resolution dismatch from layer resolution, it is now possible to auto fix it by set the layer resolution to the file
* When loading a file with auto scan for issues disabled it will force auto scan for issues types that are instant to check (print height and empty layers), if any exists it will auto select issues tab
* **(Add) PrusaSlicer printers:**
* Creality HALOT-SKY CL-89
* Creality HALOT-SKY CL-60
* (Improvement) Tool - Adjust layer height: Improve the performance when multiplying layers / go with higher layer height
* (Fix) PrusaSlicer Printer - Wanhao D7: Change the auto convertion format from .zip to .xml.cws
|
|
* **File formats:**
* Add a layer height check on file load to prevent load files with more decimal digits than supported to avoid precision errors and bugs
* Fix a wrong cast causing seconds to miliseconds convertion to be caped to the wrong value
* Internally if a layer colection was replaced, all new layers will be marked as modified to avoid forgeting and ease the code
* **Tools:**
* Pixel dimming: Better render quality, it now respects AA better and produce better walls (#172)
* Elephant foot: It now respects AA better and produce better walls for wall dimming
* Layer Import: Cancelling the operation while importing layers was permanent supresseing layer properties update when changing a base property
* (Change) PrusaSlicer print profiles: Improved raft height and bottom layer count for better print success, less delamination, shorter time and reduce wear of FEP
* (Scripts): Add operation "Validate" pattern to docs and examples (#172)
|
|
* **Core:**
* Write "Unhandled Exceptions" to an "errors.log" file at user settings directory
* Increase layer height max precision from 2 to 3 decimals
* **Settings - Layer Preview:**
* Allow to set hollow line thickness to -1 to fill the area
* Add tooltip for "Auto rotate on load": Auto rotate the layer preview on file load for a landscape viewport
* Add option to masks outline color and thickness
* Add option to clear ROI when adding masks
* Add option "Auto flip on load": Auto flip the layer preview on file load if the file is marked to print mirrored on the printer LCD
* **Layer preview:**
* Add selectable rotation directions 90º (CW and CCW)
* Add preview flip (CTRL+F) horizontally and/or vertically
* Add maskable regions to process on a layer (SHIFT + Alt + Click) on a area
* ROI: Shortcut "Shift + left click" now also selects hollow black areas inside a white perimeter
* ROI: Shortcut "ESC + Shift" to clear only the ROI and leave masks in
* Fix a crash when using the pixel picker tool outside image bounds
* **Pixel editor:**
* Change drawings brush diameter limit from 255 to 4000 maximum
* When using layers below go lower than layer 0 it no longer apply the modifications
* **File formats:**
* Add an internal GCodeBuilder to generate identical gcode within formats with auto convertion, managing features and parsing information
* Internally rearrange formats properties and pass values to the base class
* Fix "Save As" filename when using formats with dual extensions
* CBDDLP and CTB: "LightPWM" was setting "BottomLightPWM" instead
* CWS: Fix problem with filenames with dots (.) and ending with numbers (#171)
* CWS: Improved the enconding and decoding performance
* CWS: Implement all available print paramenters and per layer, missing values are got from gcode interpretation
* CWS: Use set "light off delay" layer value instead of calculating it
* CWS: Get light off delay per layer parsed from gcode
* CWS - RGB flavour (Bene4 Mono): Warn about wrong resolution if width not multiples of 3 (#171)
* ZCode: Allow to set Bottom and Light intensity (LightPWM) on paramters and per layer
* ZCode: Allow to change bottom light pwm independent from normal light pwm
* LGS: Light off and bottom light off was setting the value on the wrong units
* UVJ: Unable to set per layer parameters
* **Issues:**
* When computing islands and resin traps together, they will not compute in parallel anymore to prevent CPU and tasks exaustion, it will calculate islands first and then resin traps, this should also speed up the process on weaker machines
* Gather resin trap areas together when computing for other issues to spare a decoding cycle latter
* When using a threshold for islands detection it was also appling it to the overhangs
* Fix the spare decoding conditional cycle for partial scans
* Change resin trap search from parallel to sync to prevent fake detections and missing joints at cost of speed (#13)
* **Tools:**
* Add layer selector: 'From first to current layer' and 'From current to last layer'
* I printed this file: Multiplier - Number of time(s) the file has been printed. Half numbers can be used to consume from a failed print. Example: 0.5x if a print canceled at 50% progress
* Pixel dimming: Increase wall thickness default from 5px to 10px
* Import layers: Importing layers was not marking layers as modified, then the save file won't save the new images in, to prevent other similar bugs, all layers that got replaced will be auto marked as modified
|
|
Anycubic Photon
|
|
* (Add) File format: Zcode (Uniz IBEE)
* (Add) PrusaSlicer Printer: Uniz IBEE
* (Add) Extract: Output an "Layer.ini" file containing per layer data and include the Configuration.ini for Zip file formats
* (Improvement) Zip: Increase the GCode parsing performance
* (Fix) File formats: Wasn't set bottom / light off delay per individual layer on generic formats, defaulting every layer to 0
* (Fix) Edit print paramenters: When changing bottom layer count, layers didnt update thier properties
|
|
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
|
|
* (Add) Calibrator - Stress Tower: Generates a stress tower to test the printer capabilities
* (Add) PrusaSlicer printer: UVtools Prusa SL1, for SL1 owners must use this profile to be UVtools compatible when using advanced tools
* (Fix) Tool - Calculator - Optimal model tilt: Layer height wasn't get pulled from loaded file and fixed to 0.05mm
* **(Fix) FileFormats:**
* When change a global print paramenter, it will only set this same parameter on every layer, keeping other parameters intact, it was reseting every parameter per layer to globals
* SL1: Verify if files are malformed and if there's missing configuration files (#126)
* CTBv3: Set EncryptionMode to 0x2000000F, this allow the use of per layer settings
|
|
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
|
|
* (Add) FDG file format for Voxelab Printers (ezrec/uv3dp#129)
* (Add) PrusaSlicer printer: Voxelab Ceres 8.9
* (Change) Print time display to hours and minutes: 00h00m
|
|
* (Add) PrusaSlicer printers:
* Peopoly Phenom XXL
* QIDI 3D ibox mono
* Wanhao CGR Mini Mono
* Wanhao CGR Mono
* (Add) PrusaSlicer light supports profiles
* (Add) Calibration - Elephant Foot: Mirror output
* (Add) Calibration - XYZ Accuracy: Mirror output
* (Add) Calibration - Tolerance: Mirror output
* (Add) Calibration - Grayscale: Mirror output
* (Add) Scripts on github
* (Change) Save 'Display Width' and 'Height' to calibration profiles and load them back only if file format aware from these properties
* (Fix) Tool - Morph: Set a rectangular 3x3 kernel by default
* (Fix) Tool - Blur: Set a rectangular 3x3 kernel by default
* (Fix) Calibration - Elephant Foot: Include part scale on profile text
* (Fix) MSI dont store instalation path (#121)
|
|
* (Add) Pixel Dimming: Chamfer - Allow the number of walls pixels to be gradually varied as the operation progresses from the starting layer to the ending layer (#106)
* (Add) PrusaSlicer print profiles: 0.01, 0.02, 0.03, 0.04, 0.15, 0.2
* (Change) Morph: "Fade" to "Chamfer" naming, created profiles need redo
* (Change) Pixel Dimming: Allow start with 0px walls when using "Walls Only"
* (Change) PrusaSlicer print profiles names, reduced bottom layers and raft height
* (Remove) PrusaSlicer print profiles with 3 digit z precision (0.025 and 0.035)
* (Fix) PW0, PWS, PWMX, PWMO, PWMS, PWX file formats, where 4 offsets (16 bytes) were missing on preview image, leading to wrong table size. Previous converted files with UVtools wont open from now on, you need to reconvert them. (ezrec/uv3dp#124)
* (Fix) Unable to run Re-Height tool due a rounding problem on some cases (#101)
* (Fix) Layer preview end with exception when no per layer settings are available (SL1 case)
|
|
* (Add) File format: PWX (AnyCubic Photon X) (#93)
* (Add) File format: PWMO (AnyCubic Photon Mono) (#93)
* (Add) File format: PWMS (AnyCubic Photon Mono SE) (#93)
* (Add) PrusaSlicer printer: AnyCubic Photon X
* (Add) PrusaSlicer printer: AnyCubic Photon Mono
* (Add) PrusaSlicer printer: AnyCubic Photon Mono SE
* (Add) PrusaSlicer printer: AnyCubic Photon Mono X
* (Change) "Save as" file filter dialog with better file extension description
* (Fix) Tool - Infill: Allow save profiles
* (Fix) Material cost was showing as ml instead of currency
|
|
* (Add) Tool: Arithmetic operations
* (Add) Allow convert chitubox zip to cbddlp, ctb, photon, phz, pws, pw0, cws, zcodex
* (Add) When using filenames containing "bene4_mono" and when converting to cws it will use the GRAY2RGB encoding (#67)
* (Add) Hint on how to use layer re-height tool when it fails to launch
* (Add) PrusaSlicer Printer: Creality LD-006
* (Add) PrusaSlicer Printer: EPAX E6 Mono
* (Add) PrusaSlicer Printer: EPAX E10 Mono
* (Add) PrusaSlicer Printer: EPAX X1K 2K Mono
* (Add) PrusaSlicer Printer: Elegoo Mars C
* (Add) PrusaSlicer Printer: Longer 3D Orange4K
* (Add) PrusaSlicer Printer: Phrozen Shuffle XL Lite
* (Add) PrusaSlicer Printer: Phrozen Shuffle 16
* (Add) PrusaSlicer Printer: Phrozen Sonic 4K
* (Add) PrusaSlicer Printer: Phrozen Sonic Mighty 4K
* (Add) PrusaSlicer Printer: Voxelab Proxima
* (Add) PrusaSlicer Printer: QIDI S-Box
* (Fix) PrusaSlicer Printer: Elegoo Saturn - name and resolution
* (Fix) PrusaSlicer Printer: AnyCubic Photon S - display width/height
* (Fix) PrusaSlicer Printer: Epax X10 4K Mono - Y Resolution
* (Fix) PrusaSlicer Printer: EPAX X133 4K Mono - display width/height
* (Fix) PrusaSlicer Printer: Phrozen Shuffle Lite - display width/height
* (Fix) All PrusaSlicer Printers were reviewed and some bugs were fixed
* (Fix) Chitubox 3D preview when use files converted with UVtools (#68)
* (Fix) Overhangs: False-positives when previous or current layer as draker pixels, it now threshold pixels before proceed (#64)
* (Change) Tools: Placed "Threshold" menu item after "Morph"
|
|
|
|
|
|
|
|
* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1
|
|
* (Add) PrusaSlicer Printer: Elegoo Mars 2 Pro
* (Add) PrusaSlicer Printer: Creality LD-002H
* (Add) PrusaSlicer Printer: Voxelab Polaris
* (Add) File Format: UVJ (#8)
* (Add) Mutataor: Pixel Dimming
* (Add) Pixel Editor tab with new drawing functions
* (Add) Pixel Editor: Bursh area and shape
* (Add) Pixel Editor: Supports
* (Add) Pixel Editor: Drain holes
* (Add) Settings for pixel editor
* (Add) Setting: File open default directory
* (Add) Setting: File save default directory
* (Add) Setting: File extract default directory
* (Add) Setting: File convert default directory
* (Add) Setting: File save prompt for overwrite (#10)
* (Add) Setting: File save preffix and suffix name
* (Add) Setting: UVtools version to the title bar
* (Improvement) Force same directory as input file on dialogs
* (Improvement) Pattern: Better positioning when not using an anchor, now it's more center friendly
* (Change) Setting: Start maximized defaults to true
* (Fix) Pattern: Calculated volume was appending one margin width/height more
* (Fix) When cancel a file load, some shortcuts can crash the program as it assume file is loaded
* (Fix) pws: Encode using the same count-of-threshold method as CBDDLP (ezrec/uv3dp#79)
|
|
* (Add) PrusaSlicer Printer "EPAX X10 4K Mono"
* (Improvement) Better progress window with real progress and cancel button
* (Improvement) Mutators text and name
* (Fix) sl1: After save file gets decoded again
* (Fix) photon, cbddlp, ctb, phz, pws, pw0: Unable to save file, not closed from the decode session
* (Fix) zcodex: Unable to convert file
* (Fix) images: Wasn't opening
* (Fix) images: Wasn't saving
* (Fix) When click on button "New version is available" sometimes it crash the program
* (Fix) Force 1 layer scroll when using Mouse Wheel to scroll the tracker bar
* (Fix) PrusaSlicer printers: Mirror vertically instead to produce equal orientation compared with chitubox
|
|
* (Add) UVtools now notify when a new version available is detected
* (Add) Mutator "Flip"
* (Add) Mutator "Rotate"
* (Add) User Settings - Many parameters can now be customized to needs
* (Add) File load elapsed time into Title bar
* (Add) Outline - Print Volume bounds
* (Add) Outline - Layer bounds
* (Add) Outline - Hollow areas
* (Add) Double click layer picture to Zoom To Fit
* (Improvement) Huge performance boost in layer reparing and in every mutator
* (Improvement) Layer preview is now faster
* (Improvement) Islands detection is now better and don't skip any pixel, more islands will show or the region will be bigger
* (Improvement) Islands search are now faster, it will jump from island to insland instead of search in every pixel by pixel
* (Improvement) ResinTrap detection and corrected some cases where it can't detect a drain
* (Improvement) Better memory optimization by dispose all objects on operations
* (Improvement) Image engine changed to use only OpenCV Mat instead of two and avoid converting from one to another, as result there's a huge performance gain in some operations (#6)
* (Improvement) UVtools now rely on UVtools.Core, and drop the UVtools.Parser. The Core now perform all operations and transformations inplace of the GUI
* (Improvement) If error occur during save it will show a message with the error
* (Improvement) When rotate layer it will zoom to fit
* (Improvement) Allow zoom to fit to print volume area instead of whole build volume
* (Removed) ImageSharp dependency
* (Removed) UVtools.Parser project
* (Fix) Nova3D Elfin printer values changed to Display Width : 131mm / Height : 73mm & Screen X: 2531 / Y: 1410 (#5)
* (Fix) Fade resizes make image offset a pixel from layer to layer because of integer placement, now it matain the correct position
* (Fix) sl1: AbsoluteCorrection, GammaCorrection, MinExposureTime, MaxExposureTime, FastTiltTime, SlowTiltTime and AreaFill was byte and float values prevents the file from open (#4)
* (Fix) zcodex: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: XCorrection and YCorrection was byte and float values prevents the file from open (#4)
* (Fix) cws: Wrong # char on .gcode file prevent from printing (#4)
|
|
* (Add) cws: Allow change layer PWM value
* (Update) Dependency ImageSharp from 1.0.0-rc0002 to 1.0.0-rc0003 (It fix a error on resize function)
* (Fix) cws: GCode 0 before G29
* (Fix) Phrozen Sonic Mini: Display Height from 66.04 to 68.04
* (Fix) Zortrax Inkspire: Display and Volume to 74.67x132.88
* (Fix) Layer repair tool allow operation when every repair checkbox is deselected
|
|
|
|
|
|
* (Add) PrusaSlicer Printer "AnyCubic Photon"
* (Add) PrusaSlicer Printer "Elegoo Mars Saturn"
* (Add) PrusaSlicer Printer "Elegoo Mars"
* (Add) PrusaSlicer Printer "EPAX X10"
* (Add) PrusaSlicer Printer "EPAX X133 4K Mono"
* (Add) PrusaSlicer Printer "EPAX X156 4K Color"
* (Add) PrusaSlicer Printer "Peopoly Phenom L"
* (Add) PrusaSlicer Printer "Peopoly Phenom Noir"
* (Add) PrusaSlicer Printer "Peopoly Phenom"
* (Add) PrusaSlicer Printer "Phrozen Shuffle 4K"
* (Add) PrusaSlicer Printer "Phrozen Shuffle Lite"
* (Add) PrusaSlicer Printer "Phrozen Shuffle XL"
* (Add) PrusaSlicer Printer "Phrozen Shuffle"
* (Add) PrusaSlicer Printer "Phrozen Sonic"
* (Add) PrusaSlicer Printer "Phrozen Transform"
* (Add) PrusaSlicer Printer "QIDI Shadow5.5"
* (Add) PrusaSlicer Printer "QIDI Shadow6.0 Pro"
* (Add) "Detect" text to compute layers button
* (Add) "Repair" islands button on Islands tab
* (Add) "Highlight islands" button on layer toolbar
* (Add) Possible error cath on island computation
* (Add) After load new file layer is rotated or not based on it width, landscape will not rotate while portrait will
* (Improvement) Highlighted islands now also show AA pixels as a darker yellow
* (Improvement) Island detection now need a certain number of touching pixels to consider a island or not, ie: i can't lay on only one pixel
* (Fix) Island detection now don't consider dark fadded AA pixels as safe land
* (Fix) Epax X1 printer properties
|
|
* (Add) Zoom times information
* (Add) Island checker, navigation and removal
* (Add) Layer repair with island repair
* (Add) Show mouse coordinates over layer image
* (Fix) Pixel edit cant remove faded AA pixels
* (Fix) Pixel edit cant add white pixels over faded AA pixels
* (Change) Nova3D Elfin printer build volume from 130x70 to 132x74
|
|
* (Add) CWS file format
* (Add) Nova3D Elfin printer
* (Add) Zoom and pan functions to layer image
* (Add) Pixel editor to add or remove pixels
* (Add) Outline layer showing only borders
* (Add) Image mutators, Erode, Dilate, PyrDownUp, Smooth
* (Add) Task to save operation
* (Add) Printers can be installed from GUI Menu -> About -> Install printers into PrusaSlicer
* (Improvement) Layer Management
* (Improvement) Faster Save and Save As operation
* (Fix) Bad layer image when converting SL1 to PHZ
* (Fix) Corrected EncryptionMode for PHZ files
* (Fix) Save As can change file extension
* (Fix) Save As no longer reload file
* (Fix) SL1 files not accepting float numbers for exposures
* (Fix) SL1 files was calculating the wrong layer count when using slow layer settings
* (Fix) Modifiers can't accept float values
* (Fix) Sonic Mini prints mirroed
* (Fix) Layer resolution shows wrong values
|
|
* (Add) PHZ file format
* (Add) "Phrozen Sonic Mini" printer
* (Add) Convert Chitubox files to PHZ files and otherwise
* (Add) Convert Chitubox and PHZ files to ZCodex
* (Add) Elapsed seconds to convertion and extract dialog
* (Improvement) "Convert To" menu now only show available formats to convert to, if none menu is disabled
* (Fixed) Enforce cbt encryption
* (Fixed) Not implemented convertions stay processing forever
|
|
|
|
|
