Age | Commit message (Collapse) | Author |
|
- **File formats:**
- (Add) FlashForge SVGX format of FlashDLPrint
- (Improvement) Change `DisplayMirror` from `bool` to a `FlipDirection` enumeration, to be able to identify the exact mirror direction
- **(Add) PrusaSlicer Printers:**
- FlashForge Explorer MAX
- FlashForge Focus 8.9
- FlashForge Focus 13.3
- FlashForge Foto 6.0
- FlashForge Foto 8.9
- FlashForge Foto 13.3
- AnyCubic Photon Mono SQ
- AnyCubic Photon Ultra
- (Add) Pixel arithmetic: Preset "Elephant foot compensation"
|
|
- **File formats:**
- Add and remove some image types that can be open
- (Add) `CanProcess` method to know if a file can be read under a format and to allow diferent formats with same extension
- (Fix) `LiftHeightTotal` and `RetractHeight` was rounding to no decimals and returning wrong values
- (Improvement) Round all float setters on `Layer` class
- (Improvement) Decode/encode RAM usage and performance by processing in batch groups
- **Pixel Dimming:** (#262)
- (Add) Option "Lightening pixels" to add brightness/lightening instead of dimming/subtract pixels
- (Fix) "Dim walls only" would reset body brightness by increase pixel brightness two times it value
- **Pixel Arithmetic:**
- (Change) Transpose "Pixel Dimming" to "Pixel Arithmetic"
- (Improvement) New options and manipulations
- **(Fix) Exposure time finder:**
- Generate top staircase based on selected measure (px or mm)
- Zebra bars when used in mm measures, it was using X density instead Y to calculate the thickness
- Move 'Unit of measure' to 'Object configuration'
- Custom text with wrong Y position when using out of portion resolutions/LCDs
- **CTBv4:**
- (Fix) More Unknown fields discovered and implemented
- (Fix) Reserved table is 384 bytes instead of 420
- (Fix) When full encoding it was forcing to change to version 3. This also affected convertions. (#263)
- (Fix) `BottomRetractHeight2` was being set to `BottomRetractSpeed2`
- (Fix) `RetractHeight2` was being set to `RetracSpeed2`
- (Fix) The PrintParametersV4 table address
- (Fix) Generates invalid files to open with Chitubox and printers (#263)
- (Fix) Better progress report
- **(Add) PrusaSlicer printer notes variables:**
- BottomLiftHeight2
- BottomLiftSpeed2
- LiftHeight2
- LiftSpeed2
- BottomRetractSpeed
- BottomRetractSpeed2
- BottomRetractHeight2
- BottomRetractSpeed2
- RetractHeight2
- RetractSpeed2
- **UI:**
- (Add) File - Open current file folder (Ctrl+Shift+L): Locate and open the folder that contain the current loaded file
- (Improvement) Hide some virtual extensions from file open dialog filters
- (Improvement) UI: Refresh active thumbnail when changed
- (Change) Icon for File - Open and Open in a new file
- (Change) Rename File - Extract to: Extract file contents
- (Upgrade) AvaloniaUI from 0.10.6 to 0.10.7
- (Fix) PW0, PWM, PWMX, PWMO, PWMS: Unable to decode some files with AntiAliasing (#143)
|
|
https://github.com/tslater2006/UVtools/commit/38a49a764c12712ed2fbf12c069090b7ec3814f7
|
|
- **Windows MSI:**
- (Fix) Use the folder programs x64 instead of x86 for new installation path (#254)
- (Improvement) Mark program and all files as x64
- (Improvement) Add UVtools logo to side panel and top banner
- (Improvement) Add open-source logo to side panel
- (Improvement) License text aligment and bold title
- (Add) File format: OSLA / ODLP / OMSLA - Universal binary file format
- (Add) Calibration - Lift height: Generates test models with various strategies and increments to measure the optimal lift height or peel forces for layers given the printed area
- (Add) Layer Actions - Export layers to images (PNG, JPG/JPEG, JP2, TIF/TIFF, BMP, PBM, PGM, SR/RAS and SVG)
- (Add) About box: License with link
- (Add) Include a copy of the LICENSE on the packages
- (Improvement) File formats: Implement `Wait time before cure` properties on file formats with light-off delay, when used it will calculate the right light-off delay with that extra time and set to `LightOffDelay` property
- (Improvement) Change all date times to Utc instead of local
- (Fix) Tool - Flip: 'Both' were not working correctly
- (Fix) Linux: File 'UVtools.sh' with incorrect line break type, changed to \n (#258)
|
|
* **File formats:**
* Add Voxeldance Tango (VDT)
* Add Makerbase MKS-DLP (MDLPv1)
* Add GR1 Workshop (GR1)
* Add Creality CXDLP (CXDLP)
* When decoding a file and have a empty resolution (Width: 0 or Height: 0) it will auto fix it by get and set the first layer image resolution to the file
* Fix when decoding a file it was already set to require a full encode, preventing fast saves on print parameters edits
* **GUI:**
* When file resolution dismatch from layer resolution, it is now possible to auto fix it by set the layer resolution to the file
* When loading a file with auto scan for issues disabled it will force auto scan for issues types that are instant to check (print height and empty layers), if any exists it will auto select issues tab
* **(Add) PrusaSlicer printers:**
* Creality HALOT-SKY CL-89
* Creality HALOT-SKY CL-60
* (Improvement) Tool - Adjust layer height: Improve the performance when multiplying layers / go with higher layer height
* (Fix) PrusaSlicer Printer - Wanhao D7: Change the auto convertion format from .zip to .xml.cws
|
|
* **Core:**
* Fix some improper locks for progress counter and change to Interlocked instead
* Fix a bug when chaging layer count by remove or add layers it will malform the file after save and crash the program with some tools and/or clipboard
* Fix when a operation fails by other reason different from cancelation it was not restoring the backup
* When manually delete/fix issues it will also backup the layers
* **LayerManager:**
* LayerManager is now readonly and no longer used to transpose layers, each FileFormat have now a unique `LayerManager` instance which is set on the generic constructor
* Implemented `List<Layer>` methods to easy modify the layers array
* Changing the `Layers` instance will now recompute some properties, call the properties rebuild and forced sanitize of the structure
* Better reallocation methods
* **Clipboard Manager:**
* Add the hability to do full backups, they will be marked with an asterisk (*) at clipboard items list
* When a partial backup is made and it backups all the layers it will be converted to full backup
* Clipboard can now restore a snapshot directly with `RestoreSnapshot`
* Prevent restore the initial backup upon file load and when clearing the clipboard
* Clip's that change the layer count will perform a full backup and also do a fail-safe backup behind if previous clip is not a full backup
* **Pixel dimming:**
* Allow to load an image file as a pattern (Do not use very large files or it will take much time to dump the data into the textbox)
* Empty lines on patterns will be discarded and not trigger validation error
|
|
* **(Improvement) Calibration - Elephant Foot:** (#145)
* Remove text from bottom layers to prevent islands from not adhering to plate
* Add a option to extrude text up to a height
* **(Improvement) Calibration - Exposure time finder:** (#144)
* Increase the left and right margin to 10mm
* Allow to iterate over pixel brightness and generate dimmed objects to test multiple times at once
* **(Fix) File format PWS:**
* Some files would produce black layers if pixels are not full whites, Antialiasing level was not inherit from source
* Antialiasing level was forced 1 and not read the value from file properties
* Antialiasing threshold pixel math was producing the wrong pixel value
* **(Fix) Raw images (jpg, png, etc):** (#146)
* Set layer height to be 0.01mm by default to allow the use of some tools
* When add layers by clone or other tool it don't update layers height, positions, indexes, leading to crashes
* **(Fix) Actions - Import Layers:** (#146, #147)
* ROI calculation error leading to not process images that can potential fit inside the volumes
* Out-of-bounds calculation for Stack type
* Replace type was calculating out-of-bounds calculation like Stack type when is not required to and can lead to skip images
* Better image ROI colection for Insert and Replace types instead of capture the center most
* (Fix) Settings window: Force a redraw on open to fix auto sizes
|
|
* (Upgrade) EmguCV/OpenCV to v4.5.1
* (Upgrade) AvaloniaUI to 1.0
* (Improvement) GUI re-touched
* (Improvement) Make pixel editor tab to disappear when pixel editor is disabled
* (Improvement) Simplify the output filename from PrusaSlicer profiles
* (Improvement) All operations require a slicer file at constructor rather than on execute, this allow exposure the open file to the operation before run it
* (Improvement) Calibrations: Auto set "Mirror Output" if open file have MirrorDisplay set
* (Change) Tool - Redraw model/supports icon
* (Change) photon and cbddlp to use version 3 by default
* (Add) Tool - Dynamic layer height: Analyze and optimize the model with dynamic layer heights, larger angles will slice at lower layer height
while more straight angles will slice larger layer height. (#131)
* (Add) Calibration - Exposure time finder: Generates test models with various strategies and increments to verify the best exposure time for a given layer height
* (Add) File load checks, trigger error when a file have critical errors and attempt to fix non-critical errors
* Layers must have an valid image, otherwise trigger an error
* Layers must have a incremental or equal position Z than it previous, otherwise trigger an error
* If layer 0 starts at 0mm it will auto fix all layers, it will add Layer Height to the current z at every layer
* (Add) Tool - Edit print parameters: Allow set parameters to each x layers and skip n layers inside the given range.
This allow the use of optimizations in a layer pattern, for example, to set 3s for a layer but 2.5s for the next.
* (Add) Layer height property to "Layer Data" table: Shows layer height for the slice
* (Fix) When automations applied and file is saved, it will not warn user about file overwrite for the first time save
* (Fix) Tool - Redraw model/supports: Disable apply button when no file selected
* (Fix) Tool - Infill: Lack of equality member to test if same infill profile already exists
* (Fix) Auto converted files from SL1 where clipping filename at first dot (.), now it only strips known extensions
* (Fix) SL1 encoded files wasn't generating the right information and lead to printer crash
* (Fix) PrusaSlicer printer "Anycubic Photon S" LiftSpeed was missing and contains a typo (#135)
* (Fix) PrusaSlicer profile manager wasnt marking missing profiles to be installed (#135)
* (Fix) PrusaSlicer folder search on linux to also look at %HOME%/.config/PrusaSlicer (#135, #136)
* (Fix) Operations were revised and some bug fixed, most about can't cancel the progress
* (Fix) Some typos on tooltips
* (Fix) Prevent PhotonS from enconding, it will trigger error now as this format is read-only
* **(Fix) Ctrl + Shift + Z to redo the last operation:**
* The layer range is reseted instead of pull the used values
* Tool - Arithmetic always disabled
* Action - Layer import didn't generate info and always disabled
|
|
* **PrusaSlicer:**
* **In this release is recommended to discard your printer and refresh it with uvtools updated printer or replace notes over**
* (Add) FILEFORMAT_XXX variable to auto-convert to that file format once open in UVtools
* (Update) Print profiles fields with new PrusaSlicer version
* (Remove) LayerOffDelay from printer notes and use only the LightOffDelay variable instead, both were being used, to avoid redundacy LayerOffDelay was dropped. Please update your printer accordingly!
* (Remove) FLIP_XY compability from printers
* (Remove) AntiAlias variable from printers
* **(Add) Settings - Automations:**
* Auto save the file after apply any automation(s)
* Auto convert SL1 files to the target format when possible and load it back
* Auto set the extra 'light-off delay' based on lift height and speed.
* (Add) Allow all and future formats to convert between them without knowing each other (Abstraction)
* (Add) XYResolution and XYResolutionUm property to file formats
* (Add) Calculator - Optimal model tilt: Calculates the optimal model tilt angle for printing and to minimize the visual layer effect
* (Add) Bottom layer count to the status bar
* **(Add) FileFormat propertiers:**
* MirrorDisplay: If images need to be mirrored on lcd to print on the correct orientation (If available)
* MaxPrintHeight: The maximum Z build volume of the printer (If available)
* (Add) ZCodex: Print paramenter light-off delay"
* (Add) SL1: Implement missing keys: host_type, physical_printer_settings_id and support_small_pillar_diameter_percent
* (Change) File formats: Round all setters floats to 2 decimals
* (Change) Island Repair: "Remove Islands Below Equal Pixels" limit from 255 to 65535 (#124)
* (Change) LightOffTime variables to LayerOffDelay
* (Fix) Files with upper case extensions doesn't load in
* **(Fix) SL1:**
* Prevent error when bottle volume is 0
* bool values were incorrectly parsed
* (Fix) **ZIP:**
* Material volume was set to grams
* Bed Y was not being set
|
|
* (Add) Changelog description to the new version update dialog
* (Add) Tool - Infill: Proper configurable infills
* (Add) Pixel area as "px²" to the layer bounds and ROI at layer bottom information bar
* (Add) Pixel dimming: Alternate pattern every x layers
* (Add) Pixel dimming: Lattice infill
* (Add) Solidify: Required minimum/maximum area to solidify found areas (Default values will produce the old behaviour)
* (Add) Issues: Allow to hide and ignore selected issues
* (Add) Issue - Touch boundary: Allow to configure Left, Top, Right, Bottom margins in pixels, defaults to 5px (#94)
* (Add) UVJ: Allow convert to another formats (#96)
* (Add) Setters to some internal Core properties for more abstraction
* (Improvement) Issue - Touch boundary: Only check boundary pixels if layer bounds overlap the set margins, otherwise, it will not waste cycles on check individual rows of pixels when not need to
* (Change) Place .ctb extension show first than .cbddlp due more popular this days
* (Change) Pixel dimming: Text "Borders" to "Walls"
* (Change) Issues: Remove "Remove" text from button, keep only the icon to free up space
* (Change) Ungroup extensions on "covert to" menu (#97)
* (Fix) Issues: Detect button has a incorrect "save" icon
* (Fix) SL1: Increase NumSlow property limit
* (Fix) UVJ: not decoding nor showing preview images
* (Fix) "Convert to" menu shows same options than previous loaded file when current file dont support convertions (#96)
* (Fix) Hides "Convert to" menu when unable to convert to another format (#96)
* (Fix) Program crash when demo file is disabled and tries to load a file in
* (Fix) Rare crash on startup when mouse dont move in startup period and user types a key in meanwhile
* (Fix) On a slow startup on progress window it will show "Decoded layers" as default text, changed to "Initializing"
|
|
* (Add) Program start elapsed seconds on Log
* (Add) Lift heights @ speeds, retract speed, light-off information to status bar
* (Fix) Per layer settings are being lost when doing operations via tools that changes the layer count
* (Fix) Current layer height mm was being calculated instead of showing the stored position Z value (For hacked files)
* (Fix) Zip: By using hacked gcodes were possible to do a lift sequence without returning back to Z layer position
* (Fix) ZCodex: Read per layer lift height/speed, retract speed and pwm from GCode
* (Fix) Status bar, layer top and bottom bar: Break content down for the next line if window size overlaps the controls
* (Fix) Status bar: Make right buttons same height as left buttons
* (Improvement) CWS: Better gcode parser for decoding
* (Change) GCodes: Cure commands (Light-on/Cure time/Light-off) are only exposed when exposure time and pwm are present and greater than 0 [Safe guard]
* (Change) Zip: If only one G0 command found per layer, it will be associated to the cure z position (No lift height)
* (Change) Merged bottom/normal exposure times on status bar
* (Change) Tabs: Change controls spacing from 5 to 2 for better looking
* (Change) Deploy UVtools self-contained per platform specific: (#89)
* Platform optimized
* Reduced the package size
* Includes .NET Core assemblies and dont require the installation of .NET Core
* Can execute UVtools by double click on "UVtools" file or via ".\UVtools" on terminal
* **Naming:** UVtools_[os]-[architecture]_v[version].zip
* **"universal"** zip file that includes the portable version, os and architecture independent but requires dotnet to run, these build were used in all previous versions
|
|
|
|
* (Add) Tool - Calculator: Convert millimeters to pixels
* (Add) Tool - Calculator: Find the optimal "Ligth-Off Delay"
* (Add) Internal abstraction of display size to all file formats
* (Add) Default demo file that loads on startup when no file is specified (this can be disable/enabled on settings)
|
|
* (Add) Global print properties on formats for more internal abstraction
* (Improvement) Print properties performance internal code with abstraction
|
|
* (Add) Tool: Layer Clone
* (Add) Mutator: Mask
* (Add) Mutator - Pixel Dimming: "Strips" pattern
* (Remove) Bottom progress bar
|
|
* (Add) Tool: Change resolution
* (Add) Log: Track every action you do on the program
|
|
* (Add) Tool: Layer Re-Height - Allow change layer height
* (Add) Setting: Gap closing default iterations
* (Add) Setting: Noise removal default iterations
* (Add) Setting: Repair layers and islands by default
* (Add) Setting: Remove empty layers by default
* (Add) Setting: Repair resin traps by default
* (Change) Setting: "Reset to Defaults" changed to "Reset All Settings"
* (Fix) CWS: Lack of ';' on GCode was preventing printer from printing
|
|
* (Add) Layer remove button
* (Add) Tool: Layer removal
* (Add) Layer Repair tool: Remove empty layers
* (Add) Issues: Remove a empty layer will effectively remove the layer
* (Fix) SL1: When converting to other format in some cases the parameters on Printer Notes were not respected nor exported (#12)
* (Fix) Pixel Editor: Draw pixels was painting on wrong positions after apply, when refreshing layer some pixels disappear (Spotted by Nicholas Taylor)
|
|
* (Add) Allow chitubox, phz, pws, pw0 files convert to cws
* (Add) Allow convert between cbddlp, ctb and photon
* (Add) Allow convert between pws and pw0
* (Improvement) Layers can now have modified heights and independent parameters (#9)
* (Improvement) UVtools now generate better gcode and detect the lack of Lift and same z position and optimize the commands
* (Fix) zcodex: Wasn't reporting layer decoding progress
|