diff options
author | bubnikv <bubnikv@gmail.com> | 2018-01-05 17:59:05 +0300 |
---|---|---|
committer | bubnikv <bubnikv@gmail.com> | 2018-01-05 17:59:05 +0300 |
commit | 5effea2e1a1a2187a255d6110c788ae578bb8615 (patch) | |
tree | 19b1b6e3c1a4ce8508ba5b5b87a7cae7cba2f69b | |
parent | d7998870c7c763ea9ed0334658fc86ee6c60e51c (diff) |
Updated printer profiles.
-rw-r--r-- | resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini | 160 | ||||
-rw-r--r-- | resources/profiles/Original Prusa i3 MK3.ini | 328 |
2 files changed, 191 insertions, 297 deletions
diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini index 0ee20e8ea..160bece78 100644 --- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini +++ b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini @@ -1,4 +1,4 @@ -# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-21 at 17:47:55 +# generated by Slic3r Prusa Edition 1.38.4.17-prusa3d-win32 on 2018-01-04 at 17:24:45 [print:0.05mm DETAIL] avoid_crossing_perimeters = 0 @@ -248,7 +248,7 @@ gcode_comments = 0 infill_acceleration = 800 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.5 +infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% @@ -307,7 +307,7 @@ support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.45 +top_infill_extrusion_width = 0.4 top_solid_infill_speed = 20 top_solid_layers = 15 travel_speed = 180 @@ -532,7 +532,7 @@ xy_size_compensation = 0 [print:0.10mm DETAIL MK3] avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 7 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 @@ -548,7 +548,7 @@ elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -586,7 +586,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -627,7 +627,7 @@ thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 5 +top_solid_layers = 9 travel_speed = 250 wipe_tower = 0 wipe_tower_per_color_wipe = 15 @@ -1062,7 +1062,7 @@ xy_size_compensation = 0 [print:0.15mm OPTIMAL MK3] avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 5 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 @@ -1078,7 +1078,7 @@ elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -1116,7 +1116,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -1157,7 +1157,7 @@ thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 5 +top_solid_layers = 7 travel_speed = 250 wipe_tower = 1 wipe_tower_per_color_wipe = 15 @@ -1714,7 +1714,7 @@ elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -1752,7 +1752,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -2243,16 +2243,16 @@ dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.6 -external_perimeter_speed = 40 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 -fill_density = 20% -fill_pattern = cubic +fill_density = 10% +fill_pattern = rectilinear first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 @@ -2262,7 +2262,7 @@ gcode_comments = 0 infill_acceleration = 3500 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.7 +infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% @@ -2282,7 +2282,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -2296,7 +2296,7 @@ small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.7 +solid_infill_extrusion_width = 0.45 solid_infill_speed = 200 spiral_vase = 0 standby_temperature_delta = -5 @@ -2544,7 +2544,7 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[filament:ColorFabb Brass Bronze 1.75mm] +[filament:ColorFabb Brass Bronze] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -2567,13 +2567,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 210 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 -[filament:ColorFabb HT 1.75mm] +[filament:ColorFabb HT] bed_temperature = 105 bridge_fan_speed = 30 compatible_printers = @@ -2598,7 +2598,7 @@ first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 @@ -2625,13 +2625,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 210 -[filament:ColorFabb Woodfil 1.75mm] +[filament:ColorFabb Woodfil] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -2654,13 +2654,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 200 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 200 -[filament:ColorFabb XT 1.75mm] +[filament:ColorFabb XT] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -2685,11 +2685,11 @@ first_layer_temperature = 260 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 -[filament:ColorFabb XT-CF20 1.75mm] +[filament:ColorFabb XT-CF20] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -2714,11 +2714,11 @@ first_layer_temperature = 260 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 -[filament:ColorFabb nGen 1.75mm] +[filament:ColorFabb nGen] bed_temperature = 85 bridge_fan_speed = 40 compatible_printers = @@ -2743,7 +2743,7 @@ first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 @@ -2772,7 +2772,7 @@ first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 260 @@ -2801,11 +2801,11 @@ first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 -[filament:E3D PC-ABS 1.75mm] +[filament:E3D PC-ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2830,11 +2830,11 @@ first_layer_temperature = 270 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 -[filament:Fillamentum ABS 1.75mm] +[filament:Fillamentum ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2859,11 +2859,11 @@ first_layer_temperature = 240 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 -[filament:Fillamentum ASA 1.75mm] +[filament:Fillamentum ASA] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2888,7 +2888,7 @@ first_layer_temperature = 265 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 265 @@ -2917,7 +2917,7 @@ first_layer_temperature = 260 max_fan_speed = 80 min_fan_speed = 80 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 260 @@ -2944,13 +2944,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 190 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 190 -[filament:Generic ABS 1.75mm] +[filament:Generic ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2975,11 +2975,11 @@ first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 255 -[filament:Generic PET 1.75mm] +[filament:Generic PET] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -3004,11 +3004,11 @@ first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 -[filament:Generic PLA 1.75mm] +[filament:Generic PLA] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -3031,9 +3031,9 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 210 @@ -3062,7 +3062,7 @@ first_layer_temperature = 270 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 @@ -3089,13 +3089,13 @@ filament_type = PVA first_layer_bed_temperature = 60 first_layer_temperature = 195 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 195 -[filament:Prusa ABS 1.75mm] +[filament:Prusa ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -3120,11 +3120,11 @@ first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 255 -[filament:Prusa HIPS 1.75mm] +[filament:Prusa HIPS] bed_temperature = 100 bridge_fan_speed = 50 compatible_printers = @@ -3149,11 +3149,11 @@ first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 -[filament:Prusa PET 1.75mm] +[filament:Prusa PET] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -3178,11 +3178,11 @@ first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 -[filament:Prusa PLA 1.75mm] +[filament:Prusa PLA] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -3205,9 +3205,9 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 210 @@ -3236,11 +3236,11 @@ first_layer_temperature = 220 max_fan_speed = 90 min_fan_speed = 70 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 230 -[filament:Taulman Bridge 1.75mm] +[filament:Taulman Bridge] bed_temperature = 50 bridge_fan_speed = 40 compatible_printers = @@ -3265,11 +3265,11 @@ first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 250 -[filament:Taulman T-Glase 1.75mm] +[filament:Taulman T-Glase] bed_temperature = 90 bridge_fan_speed = 40 compatible_printers = @@ -3294,7 +3294,7 @@ first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 @@ -3321,9 +3321,9 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 @@ -3352,7 +3352,7 @@ first_layer_temperature = 220 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 @@ -3641,7 +3641,7 @@ bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 -end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = reprap @@ -3656,7 +3656,7 @@ retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 0.8 -retract_length_toolchange = 3 +retract_length_toolchange = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 209 @@ -3666,7 +3666,7 @@ retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 -start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S95 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 @@ -3676,6 +3676,6 @@ wipe = 1 z_offset = 0 [presets] -print = 0.15mm 100mms Linear Advance -printer = Original Prusa i3 MK2 -filament = Prusa PLA 1.75mm +print = 0.20mm NORMAL MK3 +printer = Original Prusa i3 MK3 +filament = Prusa PLA diff --git a/resources/profiles/Original Prusa i3 MK3.ini b/resources/profiles/Original Prusa i3 MK3.ini index e82c7c3cf..a4e0694ec 100644 --- a/resources/profiles/Original Prusa i3 MK3.ini +++ b/resources/profiles/Original Prusa i3 MK3.ini @@ -1,4 +1,4 @@ -# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-21 at 20:14:54 +# generated by Slic3r Prusa Edition 1.38.6 on 2018-01-05 at 15:21:29 [print:0.05mm DETAIL] avoid_crossing_perimeters = 0 @@ -238,7 +238,7 @@ extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 25% -fill_pattern = cubic +fill_pattern = grid first_layer_acceleration = 500 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 @@ -248,7 +248,7 @@ gcode_comments = 0 infill_acceleration = 800 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.5 +infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% @@ -307,7 +307,7 @@ support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.45 +top_infill_extrusion_width = 0.4 top_solid_infill_speed = 20 top_solid_layers = 15 travel_speed = 180 @@ -548,7 +548,7 @@ elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -556,7 +556,7 @@ extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% -fill_pattern = cubic +fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 @@ -586,7 +586,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -1078,7 +1078,7 @@ elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -1086,7 +1086,7 @@ extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% -fill_pattern = cubic +fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 @@ -1116,7 +1116,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -1484,17 +1484,17 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.20mm NORMAL] +[print:0.20mm FAST MK3] avoid_crossing_perimeters = 0 bottom_solid_layers = 4 bridge_acceleration = 1000 bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 +bridge_flow_ratio = 0.8 +bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 @@ -1502,7 +1502,7 @@ elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 +external_perimeter_speed = 35 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -1510,24 +1510,24 @@ extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 fill_density = 20% -fill_pattern = cubic +fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 3500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 60 +infill_speed = 200 interface_shells = 0 layer_height = 0.2 -max_print_speed = 100 +max_print_speed = 250 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -1540,7 +1540,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 50 +perimeter_speed = 45 perimeters = 2 post_process = print_settings_id = @@ -1555,7 +1555,7 @@ solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 50 +solid_infill_speed = 200 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -1580,9 +1580,9 @@ support_material_xy_spacing = 60% thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 40 +top_solid_infill_speed = 50 top_solid_layers = 5 -travel_speed = 120 +travel_speed = 250 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -1590,35 +1590,35 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.20mm NORMAL 0.6 nozzle] +[print:0.20mm NORMAL] avoid_crossing_perimeters = 0 bottom_solid_layers = 4 bridge_acceleration = 1000 bridge_angle = 0 -bridge_flow_ratio = 0.8 +bridge_flow_ratio = 0.95 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 +external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 40 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 -extrusion_width = 0.67 +extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = cubic first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 +first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 @@ -1626,7 +1626,7 @@ gcode_comments = 0 infill_acceleration = 2000 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.75 +infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% @@ -1645,9 +1645,9 @@ output_filename_format = [input_filename_base].gcode overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 +perimeter_extrusion_width = 0.45 perimeter_speed = 50 -perimeters = 3 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -1660,7 +1660,7 @@ small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.45 solid_infill_speed = 50 spiral_vase = 0 standby_temperature_delta = -5 @@ -1672,7 +1672,7 @@ support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 +support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -1685,7 +1685,7 @@ support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.6 +top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_layers = 5 travel_speed = 120 @@ -1696,50 +1696,50 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.20mm NORMAL MK3] +[print:0.20mm NORMAL 0.6 nozzle] avoid_crossing_perimeters = 0 bottom_solid_layers = 4 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.8 -bridge_speed = 30 +bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 +external_perimeter_extrusion_width = 0.61 external_perimeter_speed = 40 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 -extrusion_width = 0.45 +extrusion_width = 0.67 fill_angle = 45 fill_density = 20% fill_pattern = cubic first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 +first_layer_extrusion_width = 0.65 first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 3500 +infill_acceleration = 2000 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.45 +infill_extrusion_width = 0.75 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 200 +infill_speed = 60 interface_shells = 0 layer_height = 0.2 -max_print_speed = 250 +max_print_speed = 100 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -1751,9 +1751,9 @@ output_filename_format = [input_filename_base].gcode overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 60 -perimeters = 2 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 post_process = print_settings_id = raft_layers = 0 @@ -1766,8 +1766,8 @@ small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 200 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 50 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -1778,7 +1778,7 @@ support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 +support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% @@ -1791,10 +1791,10 @@ support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 50 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 40 top_solid_layers = 5 -travel_speed = 250 +travel_speed = 120 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 @@ -2226,112 +2226,6 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.35mm FAST MK3] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 30 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.6 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 3500 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.7 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 200 -interface_shells = 0 -layer_height = 0.35 -max_print_speed = 250 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 60 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.7 -solid_infill_speed = 200 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 50 -top_solid_layers = 4 -travel_speed = 250 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 - [print:0.35mm FAST sol full 0.6 nozzle] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 @@ -2544,7 +2438,7 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[filament:ColorFabb Brass Bronze 1.75mm] +[filament:ColorFabb Brass Bronze] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -2567,13 +2461,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 210 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 -[filament:ColorFabb HT 1.75mm] +[filament:ColorFabb HT] bed_temperature = 105 bridge_fan_speed = 30 compatible_printers = @@ -2598,7 +2492,7 @@ first_layer_temperature = 270 max_fan_speed = 20 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 @@ -2625,13 +2519,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 210 -[filament:ColorFabb Woodfil 1.75mm] +[filament:ColorFabb Woodfil] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -2654,13 +2548,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 200 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 200 -[filament:ColorFabb XT 1.75mm] +[filament:ColorFabb XT] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -2685,11 +2579,11 @@ first_layer_temperature = 260 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 -[filament:ColorFabb XT-CF20 1.75mm] +[filament:ColorFabb XT-CF20] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -2714,11 +2608,11 @@ first_layer_temperature = 260 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 -[filament:ColorFabb nGen 1.75mm] +[filament:ColorFabb nGen] bed_temperature = 85 bridge_fan_speed = 40 compatible_printers = @@ -2743,7 +2637,7 @@ first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 @@ -2772,7 +2666,7 @@ first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 260 @@ -2801,11 +2695,11 @@ first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 -[filament:E3D PC-ABS 1.75mm] +[filament:E3D PC-ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2830,11 +2724,11 @@ first_layer_temperature = 270 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 -[filament:Fillamentum ABS 1.75mm] +[filament:Fillamentum ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2859,11 +2753,11 @@ first_layer_temperature = 240 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 -[filament:Fillamentum ASA 1.75mm] +[filament:Fillamentum ASA] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2888,7 +2782,7 @@ first_layer_temperature = 265 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 265 @@ -2917,7 +2811,7 @@ first_layer_temperature = 260 max_fan_speed = 80 min_fan_speed = 80 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 260 @@ -2944,13 +2838,13 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 190 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 190 -[filament:Generic ABS 1.75mm] +[filament:Generic ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -2975,11 +2869,11 @@ first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 255 -[filament:Generic PET 1.75mm] +[filament:Generic PET] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -3004,11 +2898,11 @@ first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 -[filament:Generic PLA 1.75mm] +[filament:Generic PLA] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -3031,9 +2925,9 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 210 @@ -3062,7 +2956,7 @@ first_layer_temperature = 270 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 @@ -3089,13 +2983,13 @@ filament_type = PVA first_layer_bed_temperature = 60 first_layer_temperature = 195 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 195 -[filament:Prusa ABS 1.75mm] +[filament:Prusa ABS] bed_temperature = 100 bridge_fan_speed = 30 compatible_printers = @@ -3120,11 +3014,11 @@ first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 10 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 255 -[filament:Prusa HIPS 1.75mm] +[filament:Prusa HIPS] bed_temperature = 100 bridge_fan_speed = 50 compatible_printers = @@ -3149,11 +3043,11 @@ first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 -[filament:Prusa PET 1.75mm] +[filament:Prusa PET] bed_temperature = 90 bridge_fan_speed = 50 compatible_printers = @@ -3178,11 +3072,11 @@ first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 240 -[filament:Prusa PLA 1.75mm] +[filament:Prusa PLA] bed_temperature = 60 bridge_fan_speed = 100 compatible_printers = @@ -3205,9 +3099,9 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 210 @@ -3236,11 +3130,11 @@ first_layer_temperature = 220 max_fan_speed = 90 min_fan_speed = 70 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 230 -[filament:Taulman Bridge 1.75mm] +[filament:Taulman Bridge] bed_temperature = 50 bridge_fan_speed = 40 compatible_printers = @@ -3265,11 +3159,11 @@ first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 250 -[filament:Taulman T-Glase 1.75mm] +[filament:Taulman T-Glase] bed_temperature = 90 bridge_fan_speed = 40 compatible_printers = @@ -3294,7 +3188,7 @@ first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 min_print_speed = 5 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 @@ -3321,9 +3215,9 @@ filament_type = PLA first_layer_bed_temperature = 60 first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 85 +min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 210 @@ -3352,7 +3246,7 @@ first_layer_temperature = 220 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 15 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 @@ -3361,7 +3255,7 @@ bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 -end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = reprap @@ -3386,7 +3280,7 @@ retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 -start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S95 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 @@ -3398,4 +3292,4 @@ z_offset = 0 [presets] print = 0.15mm OPTIMAL MK3 printer = Original Prusa i3 MK3 -filament = Prusa PLA 1.75mm +filament = Prusa PLA |