Updated the printer profiles.

3 files changed, 277 insertions, 595 deletions

diff --git a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
index c70b07b03..5cdb020f5 100644
--- a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
+++ b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-21 at 17:48:59
+# generated by Slic3r Prusa Edition 1.38.6 on 2018-01-05 at 16:05:06
 
 [print:0.05mm DETAIL]
 avoid_crossing_perimeters = 0
@@ -238,7 +238,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 500
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -248,7 +248,7 @@ gcode_comments = 0
 infill_acceleration = 800
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.5
+infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -307,7 +307,7 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 15
 travel_speed = 180
@@ -548,7 +548,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -556,7 +556,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -586,7 +586,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 60
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1078,7 +1078,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -1086,7 +1086,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -1116,7 +1116,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 60
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1484,17 +1484,17 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL]
+[print:0.20mm FAST MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
+bridge_flow_ratio = 0.8
+bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1502,7 +1502,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -1510,24 +1510,24 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 2000
+infill_acceleration = 3500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 60
+infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 100
+max_print_speed = 250
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1540,7 +1540,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 50
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1555,7 +1555,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
+solid_infill_speed = 200
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1580,9 +1580,9 @@ support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
+top_solid_infill_speed = 50
 top_solid_layers = 5
-travel_speed = 120
+travel_speed = 250
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1590,35 +1590,35 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL 0.6 nozzle]
+[print:0.20mm NORMAL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.8
+bridge_flow_ratio = 0.95
 bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
+external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = cubic
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
+first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
@@ -1626,7 +1626,7 @@ gcode_comments = 0
 infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.75
+infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -1645,9 +1645,9 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
+perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1660,7 +1660,7 @@ small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.45
 solid_infill_speed = 50
 spiral_vase = 0
 standby_temperature_delta = -5
@@ -1672,7 +1672,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1685,7 +1685,7 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.6
+top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
 travel_speed = 120
@@ -1696,50 +1696,50 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL MK3]
+[print:0.20mm NORMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
-bridge_speed = 30
+bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.45
+extrusion_width = 0.67
 fill_angle = 45
 fill_density = 20%
 fill_pattern = cubic
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
+first_layer_extrusion_width = 0.65
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0.75
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 60
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 250
+max_print_speed = 100
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1751,9 +1751,9 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1766,8 +1766,8 @@ small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1778,7 +1778,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
+support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1791,10 +1791,10 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
 top_solid_layers = 5
-travel_speed = 250
+travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -2226,112 +2226,6 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.35mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
 [print:0.35mm FAST sol full 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
@@ -2544,7 +2438,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[filament:ColorFabb Brass Bronze  1.75mm]
+[filament:ColorFabb Brass Bronze]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -2567,13 +2461,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
-[filament:ColorFabb HT 1.75mm]
+[filament:ColorFabb HT]
 bed_temperature = 105
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2598,7 +2492,7 @@ first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
@@ -2625,13 +2519,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210
 
-[filament:ColorFabb Woodfil 1.75mm]
+[filament:ColorFabb Woodfil]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -2654,13 +2548,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
 
-[filament:ColorFabb XT 1.75mm]
+[filament:ColorFabb XT]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -2685,11 +2579,11 @@ first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
-[filament:ColorFabb XT-CF20 1.75mm]
+[filament:ColorFabb XT-CF20]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -2714,11 +2608,11 @@ first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 260
 
-[filament:ColorFabb nGen 1.75mm]
+[filament:ColorFabb nGen]
 bed_temperature = 85
 bridge_fan_speed = 40
 compatible_printers = 
@@ -2743,7 +2637,7 @@ first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
@@ -2772,7 +2666,7 @@ first_layer_temperature = 260
 max_fan_speed = 35
 min_fan_speed = 20
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 260
 
@@ -2801,11 +2695,11 @@ first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
-[filament:E3D PC-ABS 1.75mm]
+[filament:E3D PC-ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2830,11 +2724,11 @@ first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
 
-[filament:Fillamentum ABS 1.75mm]
+[filament:Fillamentum ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2859,11 +2753,11 @@ first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
 
-[filament:Fillamentum ASA 1.75mm]
+[filament:Fillamentum ASA]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2888,7 +2782,7 @@ first_layer_temperature = 265
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 265
 
@@ -2917,7 +2811,7 @@ first_layer_temperature = 260
 max_fan_speed = 80
 min_fan_speed = 80
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 260
 
@@ -2944,13 +2838,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 190
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 190
 
-[filament:Generic ABS 1.75mm]
+[filament:Generic ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2975,11 +2869,11 @@ first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
 
-[filament:Generic PET 1.75mm]
+[filament:Generic PET]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -3004,11 +2898,11 @@ first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
-[filament:Generic PLA 1.75mm]
+[filament:Generic PLA]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -3031,9 +2925,9 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210
 
@@ -3062,7 +2956,7 @@ first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
 
@@ -3089,13 +2983,13 @@ filament_type = PVA
 first_layer_bed_temperature = 60
 first_layer_temperature = 195
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 195
 
-[filament:Prusa ABS 1.75mm]
+[filament:Prusa ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -3120,11 +3014,11 @@ first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
 
-[filament:Prusa HIPS 1.75mm]
+[filament:Prusa HIPS]
 bed_temperature = 100
 bridge_fan_speed = 50
 compatible_printers = 
@@ -3149,11 +3043,11 @@ first_layer_temperature = 220
 max_fan_speed = 20
 min_fan_speed = 20
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
-[filament:Prusa PET 1.75mm]
+[filament:Prusa PET]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -3178,11 +3072,11 @@ first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
-[filament:Prusa PLA 1.75mm]
+[filament:Prusa PLA]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -3205,9 +3099,9 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210
 
@@ -3236,11 +3130,11 @@ first_layer_temperature = 220
 max_fan_speed = 90
 min_fan_speed = 70
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 230
 
-[filament:Taulman Bridge 1.75mm]
+[filament:Taulman Bridge]
 bed_temperature = 50
 bridge_fan_speed = 40
 compatible_printers = 
@@ -3265,11 +3159,11 @@ first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
 
-[filament:Taulman T-Glase 1.75mm]
+[filament:Taulman T-Glase]
 bed_temperature = 90
 bridge_fan_speed = 40
 compatible_printers = 
@@ -3294,7 +3188,7 @@ first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
 
@@ -3321,9 +3215,9 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
@@ -3352,7 +3246,7 @@ first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
@@ -3477,6 +3371,6 @@ wipe = 1
 z_offset = 0
 
 [presets]
-print = 0.15mm 100mms Linear Advance
+print = 0.15mm OPTIMAL
 printer = Original Prusa i3 MK2
-filament = Prusa PLA 1.75mm
+filament = Prusa PLA
diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
index 160bece78..9513eee36 100644
--- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
+++ b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.38.4.17-prusa3d-win32 on 2018-01-04 at 17:24:45
+# generated by Slic3r Prusa Edition 1.38.6 on 2018-01-05 at 16:03:38
 
 [print:0.05mm DETAIL]
 avoid_crossing_perimeters = 0
@@ -238,7 +238,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 500
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -532,7 +532,7 @@ xy_size_compensation = 0
 
 [print:0.10mm DETAIL MK3]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
+bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -556,7 +556,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -627,7 +627,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
-top_solid_layers = 9
+top_solid_layers = 5
 travel_speed = 250
 wipe_tower = 0
 wipe_tower_per_color_wipe = 15
@@ -1062,7 +1062,7 @@ xy_size_compensation = 0
 
 [print:0.15mm OPTIMAL MK3]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
+bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -1086,7 +1086,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -1157,7 +1157,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
-top_solid_layers = 7
+top_solid_layers = 5
 travel_speed = 250
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
@@ -1484,17 +1484,17 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL]
+[print:0.20mm FAST MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
+bridge_flow_ratio = 0.8
+bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1502,7 +1502,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -1510,24 +1510,24 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 2000
+infill_acceleration = 3500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 60
+infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 100
+max_print_speed = 250
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1540,7 +1540,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 50
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1555,7 +1555,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
+solid_infill_speed = 200
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1580,9 +1580,9 @@ support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
+top_solid_infill_speed = 50
 top_solid_layers = 5
-travel_speed = 120
+travel_speed = 250
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1590,35 +1590,35 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL 0.6 nozzle]
+[print:0.20mm NORMAL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.8
+bridge_flow_ratio = 0.95
 bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
+external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = cubic
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
+first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
@@ -1626,7 +1626,7 @@ gcode_comments = 0
 infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.75
+infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -1645,9 +1645,9 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
+perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1660,7 +1660,7 @@ small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.45
 solid_infill_speed = 50
 spiral_vase = 0
 standby_temperature_delta = -5
@@ -1672,7 +1672,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1685,7 +1685,7 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.6
+top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
 travel_speed = 120
@@ -1696,50 +1696,50 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL MK3]
+[print:0.20mm NORMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
-bridge_speed = 30
+bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.45
+extrusion_width = 0.67
 fill_angle = 45
 fill_density = 20%
 fill_pattern = cubic
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
+first_layer_extrusion_width = 0.65
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0.75
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 60
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 250
+max_print_speed = 100
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1751,9 +1751,9 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1766,8 +1766,8 @@ small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1778,7 +1778,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
+support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1791,10 +1791,10 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
 top_solid_layers = 5
-travel_speed = 250
+travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -2226,112 +2226,6 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.35mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 10%
-fill_pattern = rectilinear
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
 [print:0.35mm FAST sol full 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
@@ -3656,7 +3550,7 @@ retract_before_travel = 1
 retract_before_wipe = 0%
 retract_layer_change = 1
 retract_length = 0.8
-retract_length_toolchange = 4
+retract_length_toolchange = 3
 retract_lift = 0.6
 retract_lift_above = 0
 retract_lift_below = 209
@@ -3676,6 +3570,6 @@ wipe = 1
 z_offset = 0
 
 [presets]
-print = 0.20mm NORMAL MK3
+print = 0.05mm DETAIL MK3
 printer = Original Prusa i3 MK3
 filament = Prusa PLA
diff --git a/resources/profiles/Original Prusa i3 MK2MM.ini b/resources/profiles/Original Prusa i3 MK2MM.ini
index abcb90ec4..aba80c992 100644
--- a/resources/profiles/Original Prusa i3 MK2MM.ini
+++ b/resources/profiles/Original Prusa i3 MK2MM.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-21 at 19:24:41
+# generated by Slic3r Prusa Edition 1.38.6 on 2018-01-05 at 16:05:58
 
 [print:0.05mm DETAIL]
 avoid_crossing_perimeters = 0
@@ -238,7 +238,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 500
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -248,7 +248,7 @@ gcode_comments = 0
 infill_acceleration = 800
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.5
+infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -307,7 +307,7 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 15
 travel_speed = 180
@@ -548,7 +548,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -556,7 +556,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -586,7 +586,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 60
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1078,7 +1078,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -1086,7 +1086,7 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
@@ -1116,7 +1116,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 60
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1484,17 +1484,17 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL]
+[print:0.20mm FAST MK3]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
+bridge_flow_ratio = 0.8
+bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
@@ -1502,7 +1502,7 @@ elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
+external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -1510,24 +1510,24 @@ extruder_clearance_radius = 20
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
-fill_pattern = cubic
+fill_pattern = grid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 2000
+infill_acceleration = 3500
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 60
+infill_speed = 200
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 100
+max_print_speed = 250
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1540,7 +1540,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_speed = 50
+perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -1555,7 +1555,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
+solid_infill_speed = 200
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1580,9 +1580,9 @@ support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
+top_solid_infill_speed = 50
 top_solid_layers = 5
-travel_speed = 120
+travel_speed = 250
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -1590,35 +1590,35 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL 0.6 nozzle]
+[print:0.20mm NORMAL]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.8
+bridge_flow_ratio = 0.95
 bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
+external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = cubic
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
+first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
@@ -1626,7 +1626,7 @@ gcode_comments = 0
 infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.75
+infill_extrusion_width = 0.45
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
@@ -1645,9 +1645,9 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
+perimeter_extrusion_width = 0.45
 perimeter_speed = 50
-perimeters = 3
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1660,7 +1660,7 @@ small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.45
 solid_infill_speed = 50
 spiral_vase = 0
 standby_temperature_delta = -5
@@ -1672,7 +1672,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1685,7 +1685,7 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.6
+top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
 top_solid_layers = 5
 travel_speed = 120
@@ -1696,50 +1696,50 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.20mm NORMAL MK3]
+[print:0.20mm NORMAL 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
-bridge_speed = 30
+bridge_speed = 20
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.45
+extrusion_width = 0.67
 fill_angle = 45
 fill_density = 20%
 fill_pattern = cubic
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
+first_layer_extrusion_width = 0.65
 first_layer_height = 0.2
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 3500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.45
+infill_extrusion_width = 0.75
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
+infill_speed = 60
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 250
+max_print_speed = 100
 max_volumetric_extrusion_rate_slope_negative = 0
 max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
@@ -1751,9 +1751,9 @@ output_filename_format = [input_filename_base].gcode
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 3
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -1766,8 +1766,8 @@ small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -1778,7 +1778,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
+support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -1791,10 +1791,10 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
 threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
 top_solid_layers = 5
-travel_speed = 250
+travel_speed = 120
 wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
@@ -2226,112 +2226,6 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:0.35mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
 [print:0.35mm FAST sol full 0.6 nozzle]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
@@ -2544,7 +2438,7 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[filament:ColorFabb Brass Bronze  1.75mm]
+[filament:ColorFabb Brass Bronze]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -2567,13 +2461,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
-[filament:ColorFabb HT 1.75mm]
+[filament:ColorFabb HT]
 bed_temperature = 105
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2598,7 +2492,7 @@ first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
@@ -2625,13 +2519,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210
 
-[filament:ColorFabb Woodfil 1.75mm]
+[filament:ColorFabb Woodfil]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -2654,13 +2548,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
 
-[filament:ColorFabb XT 1.75mm]
+[filament:ColorFabb XT]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -2685,11 +2579,11 @@ first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
-[filament:ColorFabb XT-CF20 1.75mm]
+[filament:ColorFabb XT-CF20]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -2714,11 +2608,11 @@ first_layer_temperature = 260
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 260
 
-[filament:ColorFabb nGen 1.75mm]
+[filament:ColorFabb nGen]
 bed_temperature = 85
 bridge_fan_speed = 40
 compatible_printers = 
@@ -2743,7 +2637,7 @@ first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
@@ -2772,7 +2666,7 @@ first_layer_temperature = 260
 max_fan_speed = 35
 min_fan_speed = 20
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 260
 
@@ -2801,11 +2695,11 @@ first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
-[filament:E3D PC-ABS 1.75mm]
+[filament:E3D PC-ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2830,11 +2724,11 @@ first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
 
-[filament:Fillamentum ABS 1.75mm]
+[filament:Fillamentum ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2859,11 +2753,11 @@ first_layer_temperature = 240
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
 
-[filament:Fillamentum ASA 1.75mm]
+[filament:Fillamentum ASA]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2888,7 +2782,7 @@ first_layer_temperature = 265
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 265
 
@@ -2917,7 +2811,7 @@ first_layer_temperature = 260
 max_fan_speed = 80
 min_fan_speed = 80
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 260
 
@@ -2944,13 +2838,13 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 190
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 190
 
-[filament:Generic ABS 1.75mm]
+[filament:Generic ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -2975,11 +2869,11 @@ first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
 
-[filament:Generic PET 1.75mm]
+[filament:Generic PET]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -3004,11 +2898,11 @@ first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
-[filament:Generic PLA 1.75mm]
+[filament:Generic PLA]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -3031,9 +2925,9 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210
 
@@ -3062,7 +2956,7 @@ first_layer_temperature = 270
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 270
 
@@ -3089,13 +2983,13 @@ filament_type = PVA
 first_layer_bed_temperature = 60
 first_layer_temperature = 195
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 195
 
-[filament:Prusa ABS 1.75mm]
+[filament:Prusa ABS]
 bed_temperature = 100
 bridge_fan_speed = 30
 compatible_printers = 
@@ -3120,11 +3014,11 @@ first_layer_temperature = 255
 max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 255
 
-[filament:Prusa HIPS 1.75mm]
+[filament:Prusa HIPS]
 bed_temperature = 100
 bridge_fan_speed = 50
 compatible_printers = 
@@ -3149,11 +3043,11 @@ first_layer_temperature = 220
 max_fan_speed = 20
 min_fan_speed = 20
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
-[filament:Prusa PET 1.75mm]
+[filament:Prusa PET]
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -3178,11 +3072,11 @@ first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 240
 
-[filament:Prusa PLA 1.75mm]
+[filament:Prusa PLA]
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -3205,9 +3099,9 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210
 
@@ -3236,11 +3130,11 @@ first_layer_temperature = 220
 max_fan_speed = 90
 min_fan_speed = 70
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 230
 
-[filament:Taulman Bridge 1.75mm]
+[filament:Taulman Bridge]
 bed_temperature = 50
 bridge_fan_speed = 40
 compatible_printers = 
@@ -3265,11 +3159,11 @@ first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
 
-[filament:Taulman T-Glase 1.75mm]
+[filament:Taulman T-Glase]
 bed_temperature = 90
 bridge_fan_speed = 40
 compatible_printers = 
@@ -3294,7 +3188,7 @@ first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
 min_print_speed = 5
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 240
 
@@ -3321,9 +3215,9 @@ filament_type = PLA
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
-min_fan_speed = 85
+min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
@@ -3352,7 +3246,7 @@ first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
@@ -3519,7 +3413,7 @@ z_offset = 0
 [presets]
 print = 0.15mm OPTIMAL
 printer = Original Prusa i3 MK2 MultiMaterial
-filament = Prusa PLA 1.75mm
-filament_1 = Prusa PLA 1.75mm
-filament_2 = Prusa PLA 1.75mm
-filament_3 = Prusa PLA 1.75mm
+filament = Prusa PLA
+filament_1 = Prusa PLA
+filament_2 = Prusa PLA
+filament_3 = Prusa PLA