diff options
author | Robert Pelnar <robert.pelnar@seznam.cz> | 2017-08-17 16:23:34 +0300 |
---|---|---|
committer | Robert Pelnar <robert.pelnar@seznam.cz> | 2017-08-17 16:23:34 +0300 |
commit | 683784c4c7d92f352c65b53e750b48fb50d2354b (patch) | |
tree | 0545097a1aa6bd19850b09158ba716f0f98e59a3 /Firmware/Marlin_main.cpp | |
parent | a7477673de5ee67b09d04a8c81129ebd5345ebb7 (diff) |
PAT9125 I2C, hardware SG homing
separate pin configuration file for each board
changed board codes:
RAMBO =100, MiniRambo1.0 =200, MiniRambo1.3 = 203, Einy03 =303, Einy04 =304
Diffstat (limited to 'Firmware/Marlin_main.cpp')
-rw-r--r-- | Firmware/Marlin_main.cpp | 100 |
1 files changed, 64 insertions, 36 deletions
diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp index 53988194f..6e2f5b610 100644 --- a/Firmware/Marlin_main.cpp +++ b/Firmware/Marlin_main.cpp @@ -57,14 +57,21 @@ #include <avr/wdt.h> -#ifdef HAVE_PAT9125_SENSOR +#ifdef SWSPI #include "swspi.h" +#endif //SWSPI + +#ifdef SWI2C +#include "swi2c.h" +#endif //SWI2C + +#ifdef PAT9125 #include "pat9125.h" -#endif //HAVE_PAT9125_SENSOR +#endif //PAT9125 -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 #include "tmc2130.h" -#endif //HAVE_TMC2130_DRIVERS +#endif //TMC2130 #ifdef BLINKM @@ -909,7 +916,7 @@ void servo_init() static void lcd_language_menu(); -#ifdef HAVE_PAT9125_SENSOR +#ifdef PAT9125 bool fsensor_enabled = false; bool fsensor_ignore_error = true; @@ -993,7 +1000,7 @@ void fsensor_update() } } -#endif //HAVE_PAT9125_SENSOR +#endif //PAT9125 #ifdef MESH_BED_LEVELING @@ -1158,15 +1165,15 @@ void setup() plan_init(); // Initialize planner; watchdog_init(); -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 uint8_t silentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT); tmc2130_mode = silentMode?TMC2130_MODE_SILENT:TMC2130_MODE_NORMAL; -#endif //HAVE_TMC2130_DRIVERS +#endif //TMC2130 -#ifdef HAVE_PAT9125_SENSOR +#ifdef PAT9125 MYSERIAL.print("PAT9125_init:"); MYSERIAL.println(pat9125_init(200, 200)); -#endif //HAVE_PAT9125_SENSOR +#endif //PAT9125 st_init(); // Initialize stepper, this enables interrupts! @@ -1489,12 +1496,12 @@ void loop() isPrintPaused ? manage_inactivity(true) : manage_inactivity(false); checkHitEndstops(); lcd_update(); -#ifdef HAVE_PAT9125_SENSOR +#ifdef PAT9125 fsensor_update(); -#endif //HAVE_PAT9125_SENSOR -#ifdef HAVE_TMC2130_DRIVERS +#endif //PAT9125 +#ifdef TMC2130 tmc2130_check_overtemp(); -#endif //HAVE_TMC2130_DRIVERS +#endif //TMC2130 } void get_command() @@ -1993,7 +2000,7 @@ void homeaxis(int axis) if ((axis==X_AXIS)?HOMEAXIS_DO(X):(axis==Y_AXIS)?HOMEAXIS_DO(Y):0) { int axis_home_dir = home_dir(axis); -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 tmc2130_home_enter(X_AXIS_MASK << axis); #endif current_position[axis] = 0; @@ -2001,7 +2008,7 @@ void homeaxis(int axis) destination[axis] = 1.5 * max_length(axis) * axis_home_dir; feedrate = homing_feedrate[axis]; plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 tmc2130_home_restart(axis); #endif st_synchronize(); @@ -2009,18 +2016,18 @@ void homeaxis(int axis) plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); destination[axis] = -home_retract_mm(axis) * axis_home_dir; plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 tmc2130_home_restart(axis); #endif st_synchronize(); destination[axis] = 2*home_retract_mm(axis) * axis_home_dir; -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 feedrate = homing_feedrate[axis]; #else feedrate = homing_feedrate[axis] / 2; #endif plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 tmc2130_home_restart(axis); #endif st_synchronize(); @@ -2029,7 +2036,7 @@ void homeaxis(int axis) feedrate = 0.0; endstops_hit_on_purpose(); axis_known_position[axis] = true; -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 tmc2130_home_exit(); #endif } @@ -3847,7 +3854,12 @@ void process_commands() babystep_reset(); // Mark all axes as in a need for homing. memset(axis_known_position, 0, sizeof(axis_known_position)); - + + // Home in the XY plane. + //set_destination_to_current(); + setup_for_endstop_move(); + home_xy(); + // Let the user move the Z axes up to the end stoppers. if (lcd_calibrate_z_end_stop_manual( onlyZ )) { refresh_cmd_timeout(); @@ -3864,14 +3876,10 @@ void process_commands() plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS],current_position[Z_AXIS] , current_position[E_AXIS], homing_feedrate[Z_AXIS]/40, active_extruder); st_synchronize(); - // Home in the XY plane. - set_destination_to_current(); - setup_for_endstop_move(); - home_xy(); -#ifdef HAVE_TMC2130_DRIVERS - tmc2130_home_enter(X_AXIS_MASK | Y_AXIS_MASK); -#endif +//#ifdef TMC2130 +// tmc2130_home_enter(X_AXIS_MASK | Y_AXIS_MASK); +//#endif int8_t verbosity_level = 0; if (code_seen('V')) { @@ -3931,7 +3939,7 @@ void process_commands() lcd_show_fullscreen_message_and_wait_P(MSG_BABYSTEP_Z_NOT_SET); } } -#ifdef HAVE_TMC2130_DRIVERS +#ifdef TMC2130 tmc2130_home_exit(); #endif } else { @@ -5580,13 +5588,13 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp lcd_setstatuspgm(WELCOME_MSG); custom_message = false; custom_message_type = 0; -#ifdef HAVE_PAT9125_SENSOR +#ifdef PAT9125 if (fsensor_M600) { cmdqueue_pop_front(); //hack because M600 repeated 2x when enqueued to front fsensor_enable(); } -#endif //HAVE_PAT9125_SENSOR +#endif //PAT9125 } break; @@ -5928,18 +5936,22 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp } } // end if(code_seen('T')) (end of T codes) +#ifdef DEBUG_DCODES else if (code_seen('D')) // D codes (debug) { switch((int)code_value()) { case 0: // D0 - Reset + if (*(strchr_pointer + 1) == 0) break; MYSERIAL.println("D0 - Reset"); + asm volatile("jmp 0x00000"); + break; +/* MYSERIAL.println("D0 - Reset"); cli(); //disable interrupts wdt_reset(); //reset watchdog WDTCSR = (1<<WDCE) | (1<<WDE); //enable watchdog WDTCSR = (1<<WDE) | (1<<WDP0); //30ms prescaler - while(1); //wait for reset - break; + while(1); //wait for reset*/ case 1: // D1 - Clear EEPROM { MYSERIAL.println("D1 - Clear EEPROM"); @@ -5949,7 +5961,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp sei(); } break; - case 2: // D2 - read/write PIN + case 2: // D2 - Read/Write PIN { if (code_seen('P')) // Pin (0-255) { @@ -5982,13 +5994,13 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp break; case 3: MYSERIAL.print("fsensor_enable()"); -#ifdef HAVE_PAT9125_SENSOR +#ifdef PAT9125 fsensor_enable(); #endif break; case 4: MYSERIAL.print("fsensor_disable()"); -#ifdef HAVE_PAT9125_SENSOR +#ifdef PAT9125 fsensor_disable(); #endif break; @@ -6008,8 +6020,21 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp homeaxis(1); } break; + case 7: + { + MYSERIAL.print("pat9125_init="); + MYSERIAL.println(pat9125_init(200, 200)); + } + break; + case 8: + { + MYSERIAL.print("swi2c_check="); + MYSERIAL.println(swi2c_check(0x75)); + } + break; } } +#endif //DEBUG_DCODES else { @@ -6088,6 +6113,9 @@ void get_arc_coordinates() void clamp_to_software_endstops(float target[3]) { +#ifdef DEBUG_DISABLE_SWLIMITS + return; +#endif //DEBUG_DISABLE_SWLIMITS world2machine_clamp(target[0], target[1]); // Clamp the Z coordinate. |