diff options
Diffstat (limited to 'xs/src/libslic3r/GCode.cpp')
-rw-r--r-- | xs/src/libslic3r/GCode.cpp | 22 |
1 files changed, 17 insertions, 5 deletions
diff --git a/xs/src/libslic3r/GCode.cpp b/xs/src/libslic3r/GCode.cpp index fabb12bc9..547e1c067 100644 --- a/xs/src/libslic3r/GCode.cpp +++ b/xs/src/libslic3r/GCode.cpp @@ -1339,12 +1339,12 @@ void GCode::process_layer( if (objects_by_extruder_it == by_extruder.end()) continue; for (const ObjectByExtruder &object_by_extruder : objects_by_extruder_it->second) { - const size_t layer_id = &object_by_extruder - objects_by_extruder_it->second.data(); + const size_t layer_id = &object_by_extruder - objects_by_extruder_it->second.data(); const PrintObject *print_object = layers[layer_id].object(); if (print_object == nullptr) // This layer is empty for this particular object, it has neither object extrusions nor support extrusions at this print_z. - continue; - + continue; + m_config.apply(print_object->config, true); m_layer = layers[layer_id].layer(); if (m_config.avoid_crossing_perimeters) @@ -1354,9 +1354,14 @@ void GCode::process_layer( copies = print_object->_shifted_copies; else copies.push_back(print_object->_shifted_copies[single_object_idx]); - // Sort the copies by the closest point starting with the current print position. + //FIXME: Sort the copies by the closest point starting with the current print position. + // be careful to set a good copy_idx (used to identify the copy). + int copy_idx = 0; for (const Point © : copies) { + if (this->config().gcode_comments){ + gcode += ((std::ostringstream&)(std::ostringstream() << "; printing object " << print_object->model_object()->name << " id:" << layer_id << " copy " << copy_idx << "\n")).str(); + } // When starting a new object, use the external motion planner for the first travel move. std::pair<const PrintObject*, Point> this_object_copy(print_object, copy); if (m_last_obj_copy != this_object_copy) @@ -1379,6 +1384,10 @@ void GCode::process_layer( gcode += this->extrude_infill(print, island.by_region); } } + if (this->config().gcode_comments){ + gcode += ((std::ostringstream&)(std::ostringstream() << "; stop printing object " << print_object->model_object()->name << " id:" << layer_id << " copy " << copy_idx << "\n")).str(); + } + copy_idx++; } } } @@ -2362,6 +2371,10 @@ std::string GCode::retract(bool toolchange) if (m_writer.extruder() == nullptr) return gcode; + + // We need to reset e before any extrusion or wipe to allow the reset to happen at the real + // begining of an object gcode + gcode += m_writer.reset_e(); // wipe (if it's enabled for this extruder and we have a stored wipe path) if (EXTRUDER_CONFIG(wipe) && m_wipe.has_path()) { @@ -2375,7 +2388,6 @@ std::string GCode::retract(bool toolchange) length is honored in case wipe path was too short. */ gcode += toolchange ? m_writer.retract_for_toolchange() : m_writer.retract(); - gcode += m_writer.reset_e(); if (m_writer.extruder()->retract_length() > 0 || m_config.use_firmware_retraction) gcode += m_writer.lift(); |