diff options
Diffstat (limited to 'xs/src/qhull/README.txt')
-rw-r--r-- | xs/src/qhull/README.txt | 623 |
1 files changed, 623 insertions, 0 deletions
diff --git a/xs/src/qhull/README.txt b/xs/src/qhull/README.txt new file mode 100644 index 000000000..f4c7a3b22 --- /dev/null +++ b/xs/src/qhull/README.txt @@ -0,0 +1,623 @@ +This distribution of qhull library is only meant for interfacing qhull with Slic3rPE +(https://github.com/prusa3d/Slic3r). + +The qhull source file was acquired from https://github.com/qhull/qhull at revision +f0bd8ceeb84b554d7cdde9bbfae7d3351270478c. + +No changes to the qhull library were made, except for +- setting REALfloat=1 in user_r.h to enforce calculations in floats +- modifying CMakeLists.txt (the original was renamed to origCMakeLists.txt) + +Many thanks to C. Bradford Barber and all contributors. + +Lukas Matena (lukasmatena@seznam.cz) +25.7.2018 + + +See original contents of the README file below. + +====================================================================================== +====================================================================================== +====================================================================================== + + +Name + + qhull, rbox 2015.2 2016/01/18 + +Convex hull, Delaunay triangulation, Voronoi diagrams, Halfspace intersection + + Documentation: + html/index.htm + <http://www.qhull.org/html> + + Available from: + <http://www.qhull.org> + <http://www.qhull.org/download> + <http://github.com/qhull/qhull> (git@github.com:qhull/qhull.git) + + News and a paper: + <http://www.qhull.org/news> + <http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.117.405> + + Version 1 (simplicial only): + <http://www.qhull.org/download/qhull-1.0.tar.gz> + +Purpose + + Qhull is a general dimension convex hull program that reads a set + of points from stdin, and outputs the smallest convex set that contains + the points to stdout. It also generates Delaunay triangulations, Voronoi + diagrams, furthest-site Voronoi diagrams, and halfspace intersections + about a point. + + Rbox is a useful tool in generating input for Qhull; it generates + hypercubes, diamonds, cones, circles, simplices, spirals, + lattices, and random points. + + Qhull produces graphical output for Geomview. This helps with + understanding the output. <http://www.geomview.org> + +Environment requirements + + Qhull and rbox should run on all 32-bit and 64-bit computers. Use + an ANSI C or C++ compiler to compile the program. The software is + self-contained. It comes with examples and test scripts. + + Qhull's C++ interface uses the STL. The C++ test program uses QTestLib + from the Qt Framework. Qhull's C++ interface may change without + notice. Eventually, it will move into the qhull shared library. + + Qhull is copyrighted software. Please read COPYING.txt and REGISTER.txt + before using or distributing Qhull. + +To cite Qhull, please use + + Barber, C.B., Dobkin, D.P., and Huhdanpaa, H.T., "The Quickhull + algorithm for convex hulls," ACM Trans. on Mathematical Software, + 22(4):469-483, Dec 1996, http://www.qhull.org. + +To modify Qhull, particularly the C++ interface + + Qhull is on GitHub + (http://github.com/qhull/qhull, git@github.com:qhull/qhull.git) + + For internal documentation, see html/qh-code.htm + +To install Qhull + + Qhull is precompiled for Windows 32-bit, otherwise it needs compilation. + + Qhull includes Makefiles for gcc and other targets, CMakeLists.txt for CMake, + .sln/.vcproj/.vcxproj files for Microsoft Visual Studio, and .pro files + for Qt Creator. It compiles under Windows with mingw. + + Install and build instructions follow. + + See the end of this document for a list of distributed files. + +----------------- +Installing Qhull on Windows 10, 8, 7 (32- or 64-bit), Windows XP, and Windows NT + + The zip file contains rbox.exe, qhull.exe, qconvex.exe, qdelaunay.exe, + qhalf.exe, qvoronoi.exe, testqset.exe, user_eg*.exe, documentation files, + and source files. Qhull.exe and user-eg3.exe are compiled with the reentrant + library while the other executables use the non-reentrant library. + + To install Qhull: + - Unzip the files into a directory (e.g., named 'qhull') + - Click on QHULL-GO or open a command window into Qhull's bin directory. + - Test with 'rbox D4 | qhull' + + To uninstall Qhull + - Delete the qhull directory + + To learn about Qhull: + - Execute 'qconvex' for a synopsis and examples. + - Execute 'rbox 10 | qconvex' to compute the convex hull of 10 random points. + - Execute 'rbox 10 | qconvex i TO file' to write results to 'file'. + - Browse the documentation: qhull\html\index.htm + - If an error occurs, Windows sends the error to stdout instead of stderr. + Use 'TO xxx' to send normal output to xxx + + To improve the command window + - Double-click the window bar to increase the size of the window + - Right-click the window bar + - Select Properties + - Check QuickEdit Mode + Select text with right-click or Enter + Paste text with right-click + - Change Font to Lucinda Console + - Change Layout to Screen Buffer Height 999, Window Size Height 55 + - Change Colors to Screen Background White, Screen Text Black + - Click OK + - Select 'Modify shortcut that started this window', then OK + + If you use qhull a lot, install a bash shell such as + MSYS (www.mingw.org/wiki/msys), Road Bash (www.qhull.org/bash), + or Cygwin (www.cygwin.com). + +----------------- +Installing Qhull on Unix with gcc + + To build Qhull, static libraries, shared library, and C++ interface + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - make + - export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH + + The Makefiles may be edited for other compilers. + If 'testqset' exits with an error, qhull is broken + + A simple Makefile for Qhull is in src/libqhull and src/libqhull_r. + To build the Qhull executables and libqhullstatic + - Extract Qhull from qhull...tgz or qhull...zip + - cd src/libqhull_r # cd src/libqhull + - make + + +----------------- +Installing Qhull with CMake 2.6 or later + + See CMakeLists.txt for examples and further build instructions + + To build Qhull, static libraries, shared library, and C++ interface + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - cd build + - cmake --help # List build generators + - make -G "<generator>" .. && cmake .. + - cmake .. + - make + - make install + + The ".." is important. It refers to the parent directory (i.e., qhull/) + + On Windows, CMake installs to C:/Program Files/qhull. 64-bit generators + have a "Win64" tag. + + If creating a qhull package, please include a pkg-config file based on build/qhull*.pc.in + + If cmake fails with "No CMAKE_C_COMPILER could be found" + - cmake was not able to find the build environment specified by -G "..." + +----------------- +Installing Qhull with Qt + + To build Qhull, including its C++ test (qhulltest) + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Load src/qhull-all.pro into QtCreator + - Build + +------------------- +Working with Qhull's C++ interface + + See html/qh-code.htm#cpp for calling Qhull from C++ programs + + See html/qh-code.htm#reentrant for converting from Qhull-2012 + + Examples of using the C++ interface + user_eg3_r.cpp + qhulltest/*_test.cpp + + Qhull's C++ interface is likely to change. Stay current with GitHub. + + To clone Qhull's next branch from http://github.com/qhull/qhull + git init + git clone git@github.com:qhull/qhull.git + cd qhull + git checkout next + ... + git pull origin next + + Compile qhullcpp and libqhullstatic_r with the same compiler. Both libraries + use the C routines setjmp() and longjmp() for error handling. They must + be compiled with the same compiler. + +------------------- +Calling Qhull from C programs + + See html/qh-code.htm#library for calling Qhull from C programs + + See html/qh-code.htm#reentrant for converting from Qhull-2012 + + Warning: You will need to understand Qhull's data structures and read the + code. Most users will find it easier to call Qhull as an external command. + + The new, reentrant 'C' code (src/libqhull_r), passes a pointer to qhT + to most Qhull routines. This allows multiple instances of Qhull to run + at the same time. It simplifies the C++ interface. + + The non-reentrant 'C' code (src/libqhull) looks unusual. It refers to + Qhull's global data structure, qhT, through a 'qh' macro (e.g., 'qh ferr'). + This allows the same code to use static memory or heap memory. + If qh_QHpointer is defined, qh_qh is a pointer to an allocated qhT; + otherwise qh_qh is a global static data structure of type qhT. + +------------------ +Compiling Qhull with Microsoft Visual C++ + + To compile 32-bit Qhull with Microsoft Visual C++ 2010 and later + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Load solution build/qhull-32.sln + - Build target 'Win32' + - Project qhulltest requires Qt for DevStudio (http://www.qt.io) + Set the QTDIR environment variable to your Qt directory (e.g., c:/qt/5.2.0/5.2.0/msvc2012) + If QTDIR is incorrect, precompile will fail with 'Can not locate the file specified' + + To compile 64-bit Qhull with Microsoft Visual C++ 2010 and later + - 64-bit Qhull has larger data structures due to 64-bit pointers + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Load solution build/qhull-64.sln + - Build target 'Win32' + - Project qhulltest requires Qt for DevStudio (http://www.qt.io) + Set the QTDIR environment variable to your Qt directory (e.g., c:/qt/5.2.0/5.2.0/msvc2012_64) + If QTDIR is incorrect, precompile will fail with 'Can not locate the file specified' + + To compile Qhull with Microsoft Visual C++ 2005 (vcproj files) + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Load solution build/qhull.sln + - Build target 'win32' (not 'x64') + - Project qhulltest requires Qt for DevStudio (http://www.qt.io) + Set the QTDIR environment variable to your Qt directory (e.g., c:/qt/4.7.4) + If QTDIR is incorrect, precompile will fail with 'Can not locate the file specified' + +----------------- +Compiling Qhull with Qt Creator + + Qt (http://www.qt.io) is a C++ framework for Windows, Linux, and Macintosh + + Qhull uses QTestLib to test qhull's C++ interface (see src/qhulltest/) + + To compile Qhull with Qt Creator + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Download the Qt SDK + - Start Qt Creator + - Load src/qhull-all.pro + - Build + +----------------- +Compiling Qhull with mingw on Windows + + To compile Qhull with MINGW + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Install Road Bash (http://www.qhull.org/bash) + or install MSYS (http://www.mingw.org/wiki/msys) + - Install MINGW-w64 (http://sourceforge.net/projects/mingw-w64). + Mingw is included with Qt SDK. + - make + +----------------- +Compiling Qhull with cygwin on Windows + + To compile Qhull with cygwin + - Download and extract Qhull (either GitHub, .tgz file, or .zip file) + - Install cygwin (http://www.cygwin.com) + - Include packages for gcc, make, ar, and ln + - make + +----------------- +Compiling from Makfile without gcc + + The file, qhull-src.tgz, contains documentation and source files for + qhull and rbox. + + To unpack the tgz file + - tar zxf qhull-src.tgz + - cd qhull + - Use qhull/Makefile + Simpler Makefiles are qhull/src/libqhull/Makefile and qhull/src/libqhull_r/Makefile + + Compiling qhull and rbox with Makefile + - in Makefile, check the CC, CCOPTS1, PRINTMAN, and PRINTC defines + - the defaults are gcc and enscript + - CCOPTS1 should include the ANSI flag. It defines __STDC__ + - in user.h, check the definitions of qh_SECticks and qh_CPUclock. + - use '#define qh_CLOCKtype 2' for timing runs longer than 1 hour + - type: make + - this builds: qhull qconvex qdelaunay qhalf qvoronoi rbox libqhull.a libqhull_r.a + - type: make doc + - this prints the man page + - See also qhull/html/index.htm + - if your compiler reports many errors, it is probably not a ANSI C compiler + - you will need to set the -ansi switch or find another compiler + - if your compiler warns about missing prototypes for fprintf() etc. + - this is ok, your compiler should have these in stdio.h + - if your compiler warns about missing prototypes for memset() etc. + - include memory.h in qhull_a.h + - if your compiler reports "global.c: storage size of 'qh_qh' isn't known" + - delete the initializer "={0}" in global.c, stat.c and mem.c + - if your compiler warns about "stat.c: improper initializer" + - this is ok, the initializer is not used + - if you have trouble building libqhull.a with 'ar' + - try 'make -f Makefile.txt qhullx' + - if the code compiles, the qhull test case will automatically execute + - if an error occurs, there's an incompatibility between machines + - If you can, try a different compiler + - You can turn off the Qhull memory manager with qh_NOmem in mem.h + - You can turn off compiler optimization (-O2 in Makefile) + - If you find the source of the problem, please let us know + - to install the programs and their man pages: + - define MANDIR and BINDIR + - type 'make install' + + - if you have Geomview (www.geomview.org) + - try 'rbox 100 | qconvex G >a' and load 'a' into Geomview + - run 'q_eg' for Geomview examples of Qhull output (see qh-eg.htm) + +------------------ +Compiling on other machines and compilers + + Qhull may compile with Borland C++ 5.0 bcc32. A Makefile is included. + Execute 'cd src/libqhull; make -f Mborland'. If you use the Borland IDE, set + the ANSI option in Options:Project:Compiler:Source:Language-compliance. + + Qhull may compile with Borland C++ 4.02 for Win32 and DOS Power Pack. + Use 'cd src/libqhull; make -f Mborland -D_DPMI'. Qhull 1.0 compiles with + Borland C++ 4.02. For rbox 1.0, use "bcc32 -WX -w- -O2-e -erbox -lc rbox.c". + Use the same options for Qhull 1.0. [D. Zwick] + + If you have troubles with the memory manager, you can turn it off by + defining qh_NOmem in mem.h. + +----------------- +Distributed files + + README.txt // Instructions for installing Qhull + REGISTER.txt // Qhull registration + COPYING.txt // Copyright notice + QHULL-GO.lnk // Windows icon for eg/qhull-go.bat + Announce.txt // Announcement + CMakeLists.txt // CMake build file (2.6 or later) + CMakeModules/CheckLFS.cmake // enables Large File Support in cmake + File_id.diz // Package descriptor + index.htm // Home page + Makefile // Makefile for gcc and other compilers + qhull*.md5sum // md5sum for all files + + bin/* // Qhull executables and dll (.zip only) + build/qhull*.pc.in // pkg-config templates for qhull_r, qhull, and qhull_p + build/qhull-32.sln // 32-bit DevStudio solution and project files (2010 and later) + build/*-32.vcxproj + build/qhull-64.sln // 64-bit DevStudio solution and project files (2010 and later) + build/*-64.vcxproj + build/qhull.sln // DevStudio solution and project files (2005 and 2009) + build/*.vcproj + eg/* // Test scripts and geomview files from q_eg + html/index.htm // Manual + html/qh-faq.htm // Frequently asked questions + html/qh-get.htm // Download page + html/qhull-cpp.xml // C++ style notes as a Road FAQ (www.qhull.org/road) + src/Changes.txt // Change history for Qhull and rbox + src/qhull-all.pro // Qt project + +eg/ + q_eg // shell script for Geomview examples (eg.01.cube) + q_egtest // shell script for Geomview test examples + q_test // shell script to test qhull + q_test-ok.txt // output from q_test + qhulltest-ok.txt // output from qhulltest (Qt only) + make-vcproj.sh // bash shell script to create vcproj and vcxprog files + qhull-zip.sh // bash shell script for distribution files + +rbox consists of (bin, html): + rbox.exe // Win32 executable (.zip only) + rbox.htm // html manual + rbox.man // Unix man page + rbox.txt + +qhull consists of (bin, html): + qconvex.exe // Win32 executables and dlls (.zip download only) + qhull.exe // Built with the reentrant library (about 2% slower) + qdelaunay.exe + qhalf.exe + qvoronoi.exe + qhull_r.dll + qhull-go.bat // command window + qconvex.htm // html manual + qdelaun.htm + qdelau_f.htm + qhalf.htm + qvoronoi.htm + qvoron_f.htm + qh-eg.htm + qh-code.htm + qh-impre.htm + index.htm + qh-opt*.htm + qh-quick.htm + qh--*.gif // images for manual + normal_voronoi_knauss_oesterle.jpg + qhull.man // Unix man page + qhull.txt + +bin/ + msvcr80.dll // Visual C++ redistributable file (.zip download only) + +src/ + qhull/unix.c // Qhull and rbox applications using non-reentrant libqhullstatic.a + rbox/rbox.c + qconvex/qconvex.c + qhalf/qhalf.c + qdelaunay/qdelaunay.c + qvoronoi/qvoronoi.c + + qhull/unix_r.c // Qhull and rbox applications using reentrant libqhullstatic_r.a + rbox/rbox_r.c + qconvex/qconvex_r.c // Qhull applications built with reentrant libqhull_r/Makefile + qhalf/qhalf_r.c + qdelaunay/qdelaun_r.c + qvoronoi/qvoronoi_r.c + + user_eg/user_eg_r.c // example of using qhull_r.dll from a user program + user_eg2/user_eg2_r.c // example of using libqhullstatic_r.a from a user program + user_eg3/user_eg3_r.cpp // example of Qhull's C++ interface libqhullcpp with libqhullstatic_r.a + qhulltest/qhulltest.cpp // Test of Qhull's C++ interface using Qt's QTestLib + qhull-*.pri // Include files for Qt projects + testqset_r/testqset_r.c // Test of reentrant qset_r.c and mem_r.c + testqset/testqset.c // Test of non-rentrant qset.c and mem.c + + +src/libqhull + libqhull.pro // Qt project for non-rentrant, shared library (qhull.dll) + index.htm // design documentation for libqhull + qh-*.htm + qhull-exports.def // Export Definition file for Visual C++ + Makefile // Simple gcc Makefile for qhull and libqhullstatic.a + Mborland // Makefile for Borland C++ 5.0 + + libqhull.h // header file for qhull + user.h // header file of user definable constants + libqhull.c // Quickhull algorithm with partitioning + user.c // user re-definable functions + usermem.c + userprintf.c + userprintf_rbox.c + + qhull_a.h // include files for libqhull/*.c + geom.c // geometric routines + geom2.c + geom.h + global.c // global variables + io.c // input-output routines + io.h + mem.c // memory routines, this is stand-alone code + mem.h + merge.c // merging of non-convex facets + merge.h + poly.c // polyhedron routines + poly2.c + poly.h + qset.c // set routines, this only depends on mem.c + qset.h + random.c // utilities w/ Park & Miller's random number generator + random.h + rboxlib.c // point set generator for rbox + stat.c // statistics + stat.h + +src/libqhull_r + libqhull_r.pro // Qt project for rentrant, shared library (qhull_r.dll) + index.htm // design documentation for libqhull_r + qh-*_r.htm + qhull-exports_r.def // Export Definition file for Visual C++ + Makefile // Simple gcc Makefile for qhull and libqhullstatic.a + + libqhull_r.h // header file for qhull + user_r.h // header file of user definable constants + libqhull_r.c // Quickhull algorithm wi_r.hpartitioning + user_r.c // user re-definable functions + usermem.c + userprintf.c + userprintf_rbox.c + qhull_ra.h // include files for libqhull/*_r.c + geom_r.c // geometric routines + geom2.c + geom_r.h + global_r.c // global variables + io_r.c // input-output routines + io_r.h + mem_r.c // memory routines, this is stand-alone code + mem.h + merge_r.c // merging of non-convex facets + merge.h + poly_r.c // polyhedron routines + poly2.c + poly_r.h + qset_r.c // set routines, this only depends on mem_r.c + qset.h + random_r.c // utilities w/ Park & Miller's random number generator + random.h + rboxlib_r.c // point set generator for rbox + stat_r.c // statistics + stat.h + +src/libqhullcpp/ + libqhullcpp.pro // Qt project for renentrant, static C++ library + Qhull.cpp // Calls libqhull_r.c from C++ + Qhull.h + qt-qhull.cpp // Supporting methods for Qt + + Coordinates.cpp // input classes + Coordinates.h + + PointCoordinates.cpp + PointCoordinates.h + RboxPoints.cpp // call rboxlib.c from C++ + RboxPoints.h + + QhullFacet.cpp // data structure classes + QhullFacet.h + QhullHyperplane.cpp + QhullHyperplane.h + QhullPoint.cpp + QhullPoint.h + QhullQh.cpp + QhullRidge.cpp + QhullRidge.h + QhullVertex.cpp + QhullVertex.h + + QhullFacetList.cpp // collection classes + QhullFacetList.h + QhullFacetSet.cpp + QhullFacetSet.h + QhullIterator.h + QhullLinkedList.h + QhullPoints.cpp + QhullPoints.h + QhullPointSet.cpp + QhullPointSet.h + QhullSet.cpp + QhullSet.h + QhullSets.h + QhullVertexSet.cpp + QhullVertexSet.h + + functionObjects.h // supporting classes + QhullError.cpp + QhullError.h + QhullQh.cpp + QhullQh.h + QhullStat.cpp + QhullStat.h + RoadError.cpp // Supporting base classes + RoadError.h + RoadLogEvent.cpp + RoadLogEvent.h + usermem_r-cpp.cpp // Optional override for qh_exit() to throw an error + +src/libqhullstatic/ + libqhullstatic.pro // Qt project for non-reentrant, static library + +src/libqhullstatic_r/ + libqhullstatic_r.pro // Qt project for reentrant, static library + +src/qhulltest/ + qhulltest.pro // Qt project for test of C++ interface + Coordinates_test.cpp // Test of each class + PointCoordinates_test.cpp + Qhull_test.cpp + QhullFacet_test.cpp + QhullFacetList_test.cpp + QhullFacetSet_test.cpp + QhullHyperplane_test.cpp + QhullLinkedList_test.cpp + QhullPoint_test.cpp + QhullPoints_test.cpp + QhullPointSet_test.cpp + QhullRidge_test.cpp + QhullSet_test.cpp + QhullVertex_test.cpp + QhullVertexSet_test.cpp + RboxPoints_test.cpp + RoadTest.cpp // Run multiple test files with QTestLib + RoadTest.h + +----------------- +Authors: + + C. Bradford Barber Hannu Huhdanpaa (Version 1.0) + bradb@shore.net hannu@qhull.org + + Qhull 1.0 and 2.0 were developed under NSF grants NSF/DMS-8920161 + and NSF-CCR-91-15793 750-7504 at the Geometry Center and Harvard + University. If you find Qhull useful, please let us know. |