From 789a4fdcb0f4a8e4aa32ea68693a168298c1a87d Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 14:07:21 +0200 Subject: hungarian translation update, thanks to @AntoszHUN also update to gettext download link. supermerill/SuperSlicer#2834 --- resources/localization/README.md | 2 +- resources/localization/hu/Slic3r.po | 8120 +++++++++--- resources/localization/hu/TODO.po | 8593 +++---------- resources/localization/hu/hu_database.po | 19578 +++++++++++++++++++---------- 4 files changed, 20305 insertions(+), 15988 deletions(-) diff --git a/resources/localization/README.md b/resources/localization/README.md index ebc9fbd7c..215704099 100644 --- a/resources/localization/README.md +++ b/resources/localization/README.md @@ -17,7 +17,7 @@ Useful tools: * windows: * [python](https://www.python.org/) - * [gettext](http://gnuwin32.sourceforge.net/downlinks/gettext.php) + * [gettext](https://sourceforge.net/projects/cppcms/files/boost_locale/gettext_for_windows/gettext-tools-static-0.18.1.1.zip/download). Note: You need to add it to your PATH afteward (or copy all files into your C:\Windows\system32) * linux: * python: make sure you can execute python3, install it if it isn't here. * gettext: if you can't execute msgfmt, install the package 'gettext' diff --git a/resources/localization/hu/Slic3r.po b/resources/localization/hu/Slic3r.po index 4d695b242..3d4e0dfaa 100644 --- a/resources/localization/hu/Slic3r.po +++ b/resources/localization/hu/Slic3r.po @@ -5,8 +5,8 @@ msgid "" msgstr "" "Project-Id-Version: Slic3r\n" -"POT-Creation-Date: 2022-04-15 00:00\n" -"PO-Revision-Date: 2022-04-15 00:00\n" +"POT-Creation-Date: 2022-07-12 00:00\n" +"PO-Revision-Date: 2022-07-12 00:00\n" "Last-Translator:\n" "Language-Team:\n" "MIME-Version: 1.0\n" @@ -14,6 +14,9 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Language:hu\n" +msgid "!! Can be unstable in some os distribution !!" +msgstr "!! Bizonyos OS disztribúciókban instabil lehet !!" + msgid "%1$d backward edge" msgid_plural "%1$d backward edges" msgstr[0] "%1$d hátsó él" @@ -85,25 +88,28 @@ msgid "%1% Preset" msgstr "%1% Előbeállítás" msgid "%1% was substituted with %2%" -msgstr "%1% helyettesítére került a következővel: %2%" +msgstr "%1% helyettesítették %2%" msgid "%1% was successfully sliced." -msgstr "%1% szeletelése sikeresen megtörtént." +msgstr "%1% sikeresen szeletelve." + +msgid "%d perimeter: %.2f mm" +msgstr "%d kerület: %.2f mm" msgid "%d presets successfully imported." msgstr "%d előbeállítás sikeresen importálva." msgid "%s - BREAKING CHANGE" -msgstr "%s - MEGTÖRŐ VÁLTOZÁS" +msgstr "%s - TÖRÉSVÁLTÁS" msgid "%s - Drop project file" -msgstr "%s - Projekt fájl ejtése" +msgstr "%s - Projektfájl elhagyása" msgid "%s configuration is incompatible" -msgstr "A %s konfiguráció nem kompatibilis" +msgstr "%s konfiguráció nem kompatibilis" msgid "%s doesn't support percentage" -msgstr "%s nem támogatja a százalékot" +msgstr "%s nem támogatja a százalékos arányt" msgid "%s error" msgstr "%s hiba" @@ -111,9 +117,26 @@ msgstr "%s hiba" msgid "%s Family" msgstr "%s Család" +msgid "%s flow rate is maximized " +msgstr "%s áramlási sebesség maximalizálva " + +msgid "%s GUI initialization failed" +msgstr "%s GUI inicializálás sikertelen" + msgid "%s has a warning" msgstr "%s figyelmeztet_" +msgid "" +"%s has encountered a localization error. Please report to %s team, what " +"language was active and in which scenario this issue happened. Thank you.\n" +"\n" +"The application will now terminate." +msgstr "" +"%s lokalizációs hibát észlelt. Kérjük, jelentse a %s csapatnak, hogy melyik " +"nyelv volt aktív, és milyen forgatókönyv szerint történt a hiba. Köszönjük.\n" +"\n" +"Az alkalmazás ezután befejeződik." + msgid "%s has encountered an error" msgstr "%s hibát észlelt" @@ -122,9 +145,9 @@ msgid "" "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" -"%s hibát észlelt. Ezt valószínűleg a memória elfogyása okozta. Ha biztos " -"benne, hogy elegendő memória van a rendszerében, akkor ez programhiba is " -"lehet, és örülnénk, ha jelentené." +"%s hibát észlelt. Valószínűleg a memória elfogyása okozta. Ha biztos benne, " +"hogy elegendő RAM-al rendelkezik a rendszere, ez is hiba lehet, és örülnénk, " +"ha jelentené." msgid "" "%s has encountered an error. It was likely caused by running out of memory. " @@ -133,17 +156,17 @@ msgid "" "\n" "The application will now terminate." msgstr "" -"%s hibát észlelt. Valószínűleg a memória elfogyása okozta. Ha biztos benne, " -"hogy elegendő RAM van a rendszerében, akkor ez is hiba lehet, és örülnénk, " -"ha jelentené.\n" +"%s hibát észlelt. Valószínűleg a memória elfogyása okozta. Ha biztos vagy " +"benne, hogy elegendő RAM van a rendszeredben, akkor ez is lehet hiba, és " +"örülnénk, ha jelentenéd.\n" "\n" -"Az alkalmazás most leáll." +"Az alkalmazás ezután befejeződik." msgid "%s has no configuration updates available." -msgstr "A(z) %s nem rendelkezik elérhető konfigurációs frissítéssel." +msgstr "%s nem rendelkezik konfigurációs frissítésekkel." msgid "%s incompatibility" -msgstr "%s inkompatibilis" +msgstr "%s inkompatibilitás" msgid "%s info" msgstr "%s info" @@ -151,6 +174,15 @@ msgstr "%s info" msgid "%s information" msgstr "%s információ" +msgid "" +"%s is not using the newest configuration available.\n" +"Configuration Wizard may not offer the latest printers, filaments and SLA " +"materials to be installed. " +msgstr "" +"%s nem a legújabb elérhető konfigurációt használja.\n" +"A Konfigurációs varázsló nem biztos, hogy a legújabb nyomtatókat, szálakat " +"és SLA anyagokat kínálja fel a telepítéshez. " + msgid "" "%s now uses an updated configuration structure.\n" "\n" @@ -170,20 +202,32 @@ msgstr "" "különböző nyomtatók beépített alapértelmezett beállításait tartalmazzák. " "Ezek a rendszer-előbeállítások nem módosíthatók, ehelyett a felhasználók " "mostantól létrehozhatják saját előbeállításaikat, amelyek a rendszer-" -"előbeállítások valamelyikéből öröklik a beállításokat. Egy öröklődő " -"előbeállítás vagy örökölhet egy adott értéket a szülőjétől, vagy " +"előbeállítások valamelyikének beállításait öröklik.\n" +"Egy öröklődő előbeállítás örökölhet egy adott értéket a szülőjétől, vagy " "felülírhatja azt egy testreszabott értékkel.\n" "\n" "Az új előbeállítások beállításához, valamint annak kiválasztásához, hogy " "engedélyezni kívánja-e az automatikus előbeállítás-frissítéseket, kérjük, " "folytassa a következő %s lépéseket." +msgid "%s Releases" +msgstr "%s Kiadványok" + +msgid "%s version" +msgstr "%s verzió" + msgid "%s View Mode" -msgstr "%s Megjelenítési Mód" +msgstr "%s Nézet mód" msgid "%s warning" msgstr "%s figyelmeztetés" +msgid "%s website" +msgstr "%s weboldal" + +msgid "%s wiki" +msgstr "%s wiki" + msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" @@ -195,12 +239,26 @@ msgstr "" "%s most elindítja a frissítéseket. Ellenkező esetben nem fog tudni " "elindulni.\n" "\n" -"Felhívjuk a figyelmet arra, hogy először egy teljes konfigurációs " -"pillanatfelvétel készül. Ez a későbbiekben bármikor visszaállítható, ha " -"probléma merülne fel az új verzióval.\n" +"Vegye figyelembe, hogy először egy teljes konfigurációs pillanatkép jön " +"létre. Ez aztán bármikor visszaállítható, ha probléma merülne fel az új " +"verzióval.\n" "\n" "Frissített konfigurációs csomagok:" +msgid "" +"%s's user interfaces comes in three variants:\n" +"Simple, Advanced, and Expert.\n" +"The Simple mode shows only the most frequently used settings relevant for " +"regular 3D printing. The other two offer progressively more sophisticated " +"fine-tuning, they are suitable for advanced and expert users, respectively." +msgstr "" +"A %s felhasználói felülete három változatban érhető el:\n" +"Egyszerű, Haladó és Szakértő.\n" +"Az Egyszerű mód csak a leggyakrabban használt, a szokásos 3D nyomtatáshoz " +"szükséges beállításokat mutatja. A másik kettő fokozatosan kifinomultabb " +"finomhangolást kínál, ezek a haladó, illetve a szakértő felhasználók számára " +"alkalmasak." + msgid "" "%s\n" "Do you want to continue?" @@ -209,37 +267,37 @@ msgstr "" "Szeretné folytatni?" msgid "&About %s" -msgstr "A %s névjegye" +msgstr "&Névjegy %s" msgid "&Collapse Sidebar" msgstr "Oldalsáv Összecsukása" msgid "&Configuration" -msgstr "Konfiguráció" +msgstr "&Konfiguráció" msgid "&Configuration Snapshots" -msgstr "Konfigurációs Pillanatfelvételek" +msgstr "&Konfigurációs pillanatképek" msgid "&Copy" -msgstr "Másolás" +msgstr "&Másolás" msgid "&Delete Selected" msgstr "Kijelöltek törlése" msgid "&Edit" -msgstr "&Szerkesztés" +msgstr "&Szerkeszt" msgid "&Export" -msgstr "Exportlálás" +msgstr "&Exportálás" msgid "&Filament Settings Tab" -msgstr "Filament Beállítások Fül" +msgstr "&Nyomtatószál beállítások lap" msgid "&File" msgstr "&Fájl" msgid "&Finish" -msgstr "Befejezés" +msgstr "&Befejezve" msgid "&Fullscreen" msgstr "Teljes Képernyő" @@ -247,50 +305,53 @@ msgstr "Teljes Képernyő" msgid "&G-code Preview" msgstr "G-Kód Előnézet" +msgid "&Generate" +msgstr "&Generál" + msgid "&Help" -msgstr "&Segítség" +msgstr "&Súgó" msgid "&Import" -msgstr "Importálás" +msgstr "&Importálás" msgid "&Language" -msgstr "Nyelv" +msgstr "&Nyelv" msgid "&New Project" -msgstr "Új Projekt" +msgstr "&Új projekt" msgid "&Next >" -msgstr "Következő >" +msgstr "&Következő >" msgid "&Open G-code" msgstr "&G-kód megnyitása" msgid "&Open Project" -msgstr "Projekt megnyitása" +msgstr "&Nyílt projekt" msgid "&Paste" msgstr "&Beillesztés" msgid "&Preferences" -msgstr "Beállítások" +msgstr "&Preferenciák" msgid "&Quit" -msgstr "Bezárás" +msgstr "&Kilépés" msgid "&Redo" -msgstr "Mégis" +msgstr "&Mégis" msgid "&Repair STL file" -msgstr "STL fájl javítása" +msgstr "&STL fájl javítása" msgid "&Save Project" -msgstr "Projekt mentése" +msgstr "&Projekt mentése" msgid "&Select All" msgstr "Összes kijelőlése" msgid "&Undo" -msgstr "Visszavonás" +msgstr "&Visszavonás" msgid "&View" msgstr "&Nézet" @@ -298,20 +359,43 @@ msgstr "&Nézet" msgid "&Window" msgstr "&Ablak" +msgid "'As bridge' flow threshold" +msgstr "\"Hídként\" áramlási küszöbérték" + +msgid "'As bridge' speed threshold" +msgstr "\"Hídként\" sebességküszöb" + msgid "(All)" msgstr "(Minden)" +msgid "" +"(even if the acceleration is set to 3000 in the print profile, if this is at " +"1500, it won't export a gcode that will tell to go over 1500)." +msgstr "" +"(még akkor is, ha a gyorsulás 3000-re van állítva a nyomtatási profilban, ha " +"ez 1500-nál van, nem fog olyan G-kódot exportálni, amely azt mondja, hogy " +"1500 fölé menjen)." + +msgid "" +"(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)" +msgstr "" +"(a sebesség azonban soha nem csökken %1%mm/mp alá vagy legfeljebb %2%%%-os " +"csökkenésig)" + +msgid "(however, speed will never be reduced below %1%mm/s)" +msgstr "(a sebesség azonban soha nem csökken %1%mm/mp alá)" + msgid "(including spool)" -msgstr "(beleértve a spulnit)" +msgstr "(orsóval együtt)" msgid "(minimum)." -msgstr "(minimum)." +msgstr "(minimális)." msgid "(Re)slice" msgstr "(Újra)szeletelés" msgid "(Re)Slice No&w" -msgstr "(Újra)Szeletelés Most" +msgstr "(Újra)Szeletelj mos&t" msgid "(Some lines not shown)" msgstr "(Néhány sor nem látható)" @@ -323,11 +407,14 @@ msgid ") not found." msgstr ") nem található." msgid "0 (no open anchors)" -msgstr "0 (nincsenek nyitott horgonyok)" +msgstr "0 (nincs nyitott horgony)" msgid "0 (off)" msgstr "0 (kikapcsolva)" +msgid "0 (Simple connect)" +msgstr "0 (egyszerű kapcsolat)" + msgid "1 (light)" msgstr "1 (könnyű)" @@ -337,6 +424,9 @@ msgstr "1000 (korlátlan)" msgid "2 (default)" msgstr "2 (alapértelmezett)" +msgid "2x10°" +msgstr "2x10°" + msgid "3 (heavy)" msgstr "3 (nehéz)" @@ -347,39 +437,87 @@ msgid "3D Honeycomb" msgstr "3D Méhsejt" msgid "3D Mouse disconnected." -msgstr "3D egér leválasztva." +msgstr "3D egér lecsatlakoztatva." + +msgid "3D view" +msgstr "3D nézet" msgid "3Dconnexion settings" msgstr "3Dconnexion beállítások" +msgid "3x10°" +msgstr "3x10°" + +msgid "3x5°" +msgstr "3x5°" + +msgid "4x10°" +msgstr "4x10°" + +msgid "5x5°" +msgstr "5x5°" + msgid "< &Back" -msgstr "< Vissza" +msgstr "< &Vissza" + +msgid "" +"[Deprecated] Prefer using max_gcode_per_second instead, as it's much better " +"when you have very different speeds for features.\n" +"Too many too small commands may overload the firmware / connection. Put a " +"higher value here if you see strange slowdown.\n" +"Set zero to disable." +msgstr "" +"[Deprecated] Használja inkább a max_gcode_per_second-ot, mivel ez sokkal " +"jobb, ha a funkciók sebessége nagyon eltérő.\n" +"A túl sok túl kicsi parancs túlterhelheti a firmware-t / kapcsolatot. Tegyen " +"ide magasabb értéket, ha furcsa lassulást tapasztal.\n" +"A kikapcsoláshoz állítsa nullára." msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" msgstr "" "\"%1%\" ki van kapcsolva, mert \"%2%\" be van kapcsolva a \"%3%\" " -"kategóriában. \n" -"\"%1%\" engedélyezéséhez kapcsolja ki a \"%2%\"-ot." +"kategóriában.\n" +"A \"%1%\" engedélyezéséhez kapcsolja ki a \"%2%\"-ot." + +msgid "" +"\n" +"\n" +"If estimated layer time is below ~%1%s" +msgstr "" +"\n" +"\n" +"Ha a becsült rétegidő kevesebb, mint ~%1%s" + +msgid "" +"\n" +"\n" +"If estimated layer time is below ~%1%s, but still greater than ~%2%s, fan " +"will run at a proportionally increasing speed between %3%%% and %4%%%" +msgstr "" +"\n" +"\n" +"Ha a becsült rétegidő ~%1%s alatt van, de még mindig nagyobb, mint ~%2%s, a " +"ventilátor arányosan növekvő sebességgel fog működni %3%%% és %4%%% között" msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" -"Logikai kifejezés, amely egy aktív nyomtatási profil konfigurációs értékeit " -"használja. Ha ez a kifejezés igaz, akkor ez a profil kompatibilis az aktív " -"nyomtatási profillal." +"Egy aktív nyomtatási profil konfigurációs értékeit használó bólés kifejezés. " +"Ha a kifejezés értéke igaz, akkor ez a profil kompatibilisnek tekinthető az " +"aktív nyomtatási profillal." msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" -"Logikai kifejezés, amely egy aktív nyomtatóprofil konfigurációs értékeit " -"használja. Ha ez a kifejezés igaz, akkor ez a profil kompatibilis az aktív " -"nyomtatóprofillal." +"Egy aktív nyomtatóprofil konfigurációs értékeit használó bólés kifejezés. Ha " +"a kifejezés értéke igaz, akkor ez a profil kompatibilisnek tekinthető az " +"aktív nyomtatóprofillal." msgid "" "A copy of the current system preset will be created, which will be detached " @@ -406,14 +544,16 @@ msgstr[1] "" "Új gyártók kerültek telepítésre, és azok egyik nyomtatója aktiválásra került" msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." -msgstr "Az ökölszabály a 160–230 °C PLA, és a 215–250 °C ABS esetén." +msgstr "" +"Az ökölszabály szerint a PLA esetében 160-230°C, az ABS-nél pedig 215-250°C " +"között van." msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" -"Az ökölszabály a 60 °C PLA és 110 °C az ABS esetében. Ha nincs fűtött " -"tárgyasztala, adjon meg nullát." +"Az ökölszabály szerint a PLA esetén 60°C, ABS esetében pedig 110°C. Hagyja " +"nullán, ha nincs fűthető ágy." msgid "" "A slower printing profile might be necessary when using materials with " @@ -425,7 +565,7 @@ msgstr "" "késleltetést ad hozzá az expozíció előtt." msgid "A toolpath outside the print area was detected." -msgstr "Szerszámpálya található a nyomtatási területen kívül." +msgstr "Nyomtatási területen kívül eső szerszámpálya észlelve." msgid "Abort" msgstr "Megszakítás" @@ -434,7 +574,13 @@ msgid "About %s" msgstr "Szerző: %s" msgid "above" -msgstr "felett" +msgstr "fentebb" + +msgid "Above bridge flow ratio" +msgstr "Híd feletti áramlási arány" + +msgid "Above the bridges" +msgstr "A hidak felett" msgid "Above Z" msgstr "Z felett" @@ -442,6 +588,9 @@ msgstr "Z felett" msgid "Acceleration control (advanced)" msgstr "Gyorsulásszabályozás (Haladó)" +msgid "Access via settings button in the top menu" +msgstr "Hozzáférés a felső menü beállítások gombjával" + msgid "Access violation" msgstr "Hozzáférés megsértése" @@ -449,13 +598,13 @@ msgid "Accuracy" msgstr "Pontosság" msgid "Accurate" -msgstr "Precíz" +msgstr "Pontos" msgid "Action" -msgstr "Művelet" +msgstr "Akció" msgid "Activate" -msgstr "Aktiválás" +msgstr "Aktiválja" msgid "Active" msgstr "Aktív" @@ -467,7 +616,7 @@ msgid "Adaptive" msgstr "Adaptív" msgid "Adaptive Cubic" -msgstr "Adaptív Kocka" +msgstr "Adaptív kocka" msgid "Add" msgstr "Hozzáadás" @@ -476,70 +625,85 @@ msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" msgstr "" "\"%1%\" hozzáadása a \"%2%\" fizikai nyomtató következő előbeállításaként." +msgid "" +"Add a M106 S255 (max speed for fan) for this amount of seconds before going " +"down to the desired speed to kick-start the cooling fan.\n" +"This value is used for a 0->100% speedup, it will go down if the delta is " +"lower.\n" +"Set to 0 to deactivate." +msgstr "" +"Adjon hozzá egy M106 S255-öt (a ventilátor maximális fordulatszáma) ennyi " +"másodpercig, mielőtt a kívánt fordulatszámra csökkenne, hogy beindítsa a " +"hűtőventilátort.\n" +"Ezt az értéket 0->100%-os felgyorsítás esetén használjuk, ha a delta kisebb, " +"akkor lefelé megy.\n" +"A kikapcsoláshoz állítsa 0-ra." + msgid "Add a pad underneath the supported model" -msgstr "Párna hozzáadása a támasztott modell alá" +msgstr "Adjon hozzá egy padot a támogatott modell alá" msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" -"Hozzáad egy burkolatot (egyetlen kerületi vonalat) a támasztékhoz. Ez " -"megbízhatóbbá, de nehezebben eltávolíthatóvá teszi a támaszt." +"Adjon hozzá egy burkolatot (egyetlen kerületi vonalat) az alaptartó körül. " +"Ez megbízhatóbbá teszi a támasztékot, de nehezebbé is teszi annak " +"eltávolítását." msgid "Add another code - Ctrl + Left click" -msgstr "További kód hozzáadása - Ctrl + Bal egérgombbal kattintás" +msgstr "Újabb kód hozzáadása - CTRL+Bal klikk" msgid "Add another code - Right click" -msgstr "További kód hozzáadása - Jobb egérgombbal kattintás" +msgstr "Új kód hozzáadása - jobb klikk" msgid "Add color change" -msgstr "Színváltás hozzáadása" +msgstr "Színváltozás hozzáadása" msgid "Add color change (%1%) for:" -msgstr "Színváltás hozzáadása (%1%) a következőkhöz:" +msgstr "Színváltozás hozzáadása (%1%):" msgid "Add color change - Left click" -msgstr "Színváltás hozzáadása - Bal egérgombbal kattintás" +msgstr "Színváltás hozzáadása - Balra klikk" msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" -"Színváltás hozzáadása - Bal egérgombbal kattintás előre definiált színhez, " -"vagy Shift + Bal egérgombbal kattintás egyéni színválasztáshoz" +"Színváltás hozzáadása - bal klikk előre definiált színhez vagy SHIFT+Bal " +"klikk egyéni színválasztáshoz" msgid "Add color change marker for current layer" -msgstr "Színváltási jelölő hozzáadása az aktuális réteghez" +msgstr "Színváltoztatási jelölő hozzáadása az aktuális réteghez" msgid "Add custom G-code" -msgstr "Egyedi G-kód hozzáadása" +msgstr "Egyéni G-kód felvétele" msgid "Add custom template" -msgstr "Egyéni sablon hozzáadása" +msgstr "Egyéni sablon felvétele" msgid "Add detail" msgstr "Részlet hozzáadása" msgid "Add drainage hole" -msgstr "Leeresztő furat hozzáadása" +msgstr "Adjon hozzá vízelvezető lyukat" msgid "Add extruder change - Left click" -msgstr "Extruder váltás hozzáadása - Bal egérkattintás" +msgstr "Extruder módosítás hozzáadása - Balra klikk" msgid "Add extruder to sequence" -msgstr "Extruder hozzáadása a sorozathoz" +msgstr "Extruder hozzáadása a szekvenciához" msgid "Add Generic Subobject" -msgstr "Általános Részobjektum Hzáadása" +msgstr "Általános alobjektum hozzáadása" msgid "Add Height Range" -msgstr "Magasságtartomány hozzáadása" +msgstr "Magassági tartomány hozzáadása" msgid "Add instance" -msgstr "Példány hozzáadása" +msgstr "Példa hozzáadása" msgid "Add Instance of the selected object" -msgstr "A kijelölt objektum újabb példányának hozzáadása" +msgstr "A kiválasztott objektum példányának hozzáadása" msgid "Add layer range" msgstr "Rétegtartomány hozzáadása" @@ -547,41 +711,76 @@ msgstr "Rétegtartomány hozzáadása" msgid "Add Layers" msgstr "Rétegek hozzáadása" +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters until all overhangs are filled.\n" +"!! this is a very slow algorithm !!\n" +"If you use this setting, strongly consider also using overhangs_reverse." +msgstr "" +"Ha szükséges, adjon hozzá további kerületeket, hogy elkerülje a rések " +"elkerülését a ferde falakban. A Slic3r folyamatosan bővíti a kerületeket, " +"amíg az összes túlnyúlást meg nem töltik.\n" +"!! ez egy nagyon lassú algoritmus!!\n" +"Ha ezt a beállítást használja, erősen fontolja meg az overhangs_reverse " +"használatát is." + +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported.\n" +"If you succeed in triggering the algorithm behind this setting, please send " +"me a message. Personally, I think it's useless." +msgstr "" +"Ha szükséges, adjon hozzá további kerületeket, hogy elkerülje a rések " +"elkerülését a ferde falakban. A Slic3r folyamatosan bővíti a kerületeket, " +"amíg a fenti hurok több mint 70%-a nem támogatott.\n" +"Ha sikerül elindítani a beállítás mögötti algoritmust, kérjük, küldjön " +"üzenetet. Személy szerint szerintem felesleges." + +msgid "" +"Add one perimeter every odd layer. With this, infill is taken into the " +"sandwich and you may be able to reduce drastically the infill/perimeter " +"overlap setting. " +msgstr "" +"Adjon hozzá egy kerületet minden páratlan réteghez. Ezzel a kitöltés bekerül " +"a szendvicsbe, és drasztikusan csökkentheti a kitöltés/kerület átfedés " +"beállítását " + msgid "Add pause print" msgstr "Nyomtatási szünet hozzáadása" msgid "Add physical printer" -msgstr "Fizikai nyomtató hozzáadása" +msgstr "Fizikai nyomtató felvétele" msgid "Add point" msgstr "Pont hozzáadása" msgid "Add point to selection" -msgstr "Pont hozzáadása kijelöléshez" +msgstr "Pont hozzáadása a kijelöléshez" msgid "Add preset for this printer device" msgstr "Előbeállítás hozzáadása ehhez a nyomtatóeszközhöz" msgid "Add Settings Bundle for Height range" -msgstr "Magasságtartományok beállítási csomag hozzáadása" +msgstr "Beállítási csomag hozzáadása a magassági tartományhoz" msgid "Add Settings Bundle for Object" -msgstr "Objektum beállítási csomag hozzáadása" +msgstr "Beállítási csomag hozzáadása az objektumhoz" msgid "Add Settings Bundle for Sub-object" -msgstr "Alobjektumok beállítási csomag hozzáadása" +msgstr "Beállítási csomag hozzáadása az alobjektumhoz" msgid "Add Settings for Layers" -msgstr "Rétegek beállításainak hozzáadása" +msgstr "Beállítások hozzáadása a rétegekhez" msgid "Add Settings for Object" msgstr "Objektum beállításainak hozzáadása" msgid "Add Settings for Sub-object" -msgstr "Alobjektumok beállításainak hozzáadása" +msgstr "Beállítások hozzáadása az alobjektumhoz" msgid "Add Shape" -msgstr "Alakzat hozzáadása" +msgstr "Alak hozzáadása" msgid "Add Shape from Gallery" msgstr "Alakzat Hozzáadása a Galériából" @@ -589,32 +788,52 @@ msgstr "Alakzat Hozzáadása a Galériából" msgid "Add Shapes from Gallery" msgstr "Alakzatok Hozzáadása a Galériából" +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers).\n" +"!! solid_over_perimeters may erase these surfaces !!" +msgstr "" +"A lejtős felületek közelében szilárd kitöltés hozzáadása a függőleges " +"héjvastagság garantálása érdekében (felső+alsó szilárd rétegek).\n" +"!! solid_over_perimeters törölheti ezeket a felületeket !!" + msgid "Add support point" -msgstr "Támasztó pont hozzáadása" +msgstr "Támaszpont hozzáadása" msgid "Add supports" -msgstr "Támasztékok hozzáadása" +msgstr "Támaszok hozzáadása" msgid "Add supports by angle" -msgstr "Támasztékok hozzáadása szög alapján" +msgstr "Támaszok hozzáadása szögek szerint" + +msgid "" +"Add this angle each layer to the base angle for infill. May be useful for " +"art, or to be sure to hit every object's feature even with very low infill. " +"Still experimental, tell me what makes it useful, or the problems that arise " +"using it." +msgstr "" +"Adja hozzá ezt a szöget minden rétegben a kitöltés alapszögéhez. Hasznos " +"lehet a művészethez, vagy ahhoz, hogy biztosan eltalálja minden objektum " +"jellemzőjét, még nagyon alacsony kitöltés esetén is. Még kísérleti, mondd " +"el, mitől lesz hasznos, vagy milyen problémák merülnek fel a használatával." msgid "Add..." -msgstr "Hozzáadás..." +msgstr "Hozzáad..." msgid "Add/Remove filaments" -msgstr "Filament Hozzáadása/Eltávolítása" +msgstr "Szálak hozzáadása/eltávolítása" msgid "Add/Remove materials" -msgstr "Alapanyag Hozzáadása/Eltávolítása" +msgstr "Anyagok hozzáadása/eltávolítása" msgid "Add/Remove presets" -msgstr "Előbeállítás Hozzáadása/Eltávolítása" +msgstr "Előbeállítások hozzáadása/eltávolítása" msgid "Add/Remove printers" -msgstr "Nyomtató Hozzáadása/Eltávolítása" +msgstr "Nyomtatók hozzáadása/eltávolítása" msgid "Additional information:" -msgstr "További információ:" +msgstr "További információk:" msgid "Additional Settings" msgstr "További beállítások" @@ -623,8 +842,8 @@ msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "" -"Ezenkívül a frissítés alkalmazása előtt a teljes konfigurációról " -"pillanatfelvétel készül." +"Ezenkívül a frissítés alkalmazása előtt a teljes konfigurációról biztonsági " +"mentés készül." msgid "Address" msgstr "Cím" @@ -633,7 +852,10 @@ msgid "Advanced" msgstr "Haladó" msgid "Advanced mode" -msgstr "Haladó mód" +msgstr "Haladó üzemmód" + +msgid "Advanced wipe tower purge volume calculs" +msgstr "Fejlett törlőtorony tisztítási térfogat számítások" msgid "Advanced: Output log" msgstr "Haladó: Kimeneti napló" @@ -645,18 +867,39 @@ msgid "" "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Szerszámcsere után előfordulhat, hogy az újonnan betöltött filament pontos " -"helyzete a fúvókán belül nem ismert, és a filamet nyomása még valószínűleg " -"nem stabil. Mielőtt a nyomtatófejet egy kitöltésbe vagy egy feláldozható " -"tárgyba öblítené, a Slic3r ezt az anyagmennyiséget mindig törlőtoronyba " -"tölti, hogy ezután már megbízhatóan tudjon extrudálni kitöltések vagy " -"áldozati tárgyak esetén." +"Szerszámcsere után előfordulhat, hogy az újonnan betöltött nyomtatószál " +"pontos helyzete a fúvókán belül nem ismert, és a nyomtatószál nyomása " +"valószínűleg még nem stabil. Mielőtt a nyomtatófejet egy kitöltésbe vagy egy " +"feláldozható tárgyba öblítené, a Slic3r mindig ezt az anyagmennyiséget " +"alapozza a törlőtoronyba, hogy megbízhatóan hozzon létre egymás utáni " +"kitöltéseket vagy áldozati tárgyak extrudálásait." + +msgid "after last perimeter" +msgstr "utolsó kerület után" msgid "After layer change G-code" -msgstr "G-kód Rétegváltás Után" +msgstr "Rétegváltás után G-kód" + +msgid "Algorithm" +msgstr "Algoritmus" + +msgid "" +"Algorithm for the advanced wipe.\n" +"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" +"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " +"volume_mult * (pigmentBefore-pigmentAfter)^3\n" +"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / " +"(0.5+pigmentAfter)" +msgstr "" +"Algoritmus a fejlett törléshez.\n" +"Lineáris : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" +"Kvadratikus: térfogat = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " +"volume_mult * (pigmentBefore-pigmentAfter)^3\n" +"Hiperbola: térfogat = nozzle + volume_mult * (0.5+pigmentBefore) / " +"(0.5+pigmentAfter)" msgid "Align the model to the given point." -msgstr "A modell igazítása egy megadott ponthoz." +msgstr "Igazítsa a modellt a megadott ponthoz." msgid "Align XY" msgstr "XY igazítása" @@ -665,10 +908,28 @@ msgid "Aligned" msgstr "Igazított" msgid "All" -msgstr "Összes" +msgstr "Minden" + +msgid "" +"All characters that are written here will be replaced by '_' when writing " +"the gcode file name.\n" +"If the first charater is '[' or '(', then this field will be considered as a " +"regexp (enter '[^a-zA-Z0-9]' to only use ascii char)." +msgstr "" +"A G-kód fájlnév írásakor az ide írt karakterek helyébe a '_' karakter lép.\n" +"Ha az első karakter '[' vagy '(', akkor ezt a mezőt regexp-nek kell " +"tekinteni (írja be a '[^a-zA-Z0-9]' karaktert, ha csak ascii karaktereket " +"akar használni)." + +msgid "" +"All gaps, between the last perimeter and the infill, which are thinner than " +"a perimeter will be filled by gapfill." +msgstr "" +"Az utolsó kerület és a kitöltés közötti minden olyan hézagot, amely " +"vékonyabb, mint egy kerület, hézagkitöltéssel kell kitölteni." msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" -msgstr "Minden gizmo: Forgatás - bal egérgomb; Pásztázás - jobb egérgomb" +msgstr "Minden kütyü: Pásztázás - jobb egérgomb" msgid "All installed printers are compatible with the selected %1%." msgstr "Minden telepített nyomtató kompatibilis a kiválasztott %1% -val." @@ -677,22 +938,22 @@ msgid "All non-solid parts (modifiers) were deleted" msgstr "Minden nem szilárd alkatrész (módosító) törlésre került" msgid "All objects are outside of the print volume." -msgstr "Minden objektum a nyomtatási területen kívülre esik." +msgstr "Minden objektum a nyomtatási térfogaton kívül van." msgid "All objects will be removed, continue?" -msgstr "Minden objektum el lesz távolítva, folytatja?" +msgstr "Minden tárgyat eltávolítunk, folytatja?" msgid "All settings changes will be discarded." -msgstr "Minden beállítási változtatás elvetése." +msgstr "Minden beállítási változtatás elvetésre kerül." msgid "All settings changes will not be saved" msgstr "A beállítások módosításai nem kerülnek mentésre" msgid "All solid surfaces" -msgstr "Minden tömör felület" +msgstr "Minden szilárd felület" msgid "All standard" -msgstr "Összes standard" +msgstr "Minden szabványos" msgid "All top surfaces" msgstr "Minden felső felület" @@ -706,14 +967,53 @@ msgstr "Összes fal" msgid "allocation failed" msgstr "allokáció sikertelen" +msgid "Allow empty layers" +msgstr "Üres rétegek engedélyezése" + +msgid "Allow fan delay on overhangs" +msgstr "Engedélyezze a ventilátor késleltetését a túlnyúlásoknál" + +msgid "Allow just a single %1% instance" +msgstr "Csak egyetlen %1% példány engedélyezése" + msgid "Allow next color repetition" msgstr "Színismétlés engedélyezése" +msgid "Allow only one skirt loop" +msgstr "Csak egy szoknyahurok engedélyezése" + +msgid "" +"Allow Slic3r to compute the purge volume via smart computations. Use the " +"pigment% of each filament and following parameters" +msgstr "" +"Engedélyezze, hogy a Slic3r intelligens számítások segítségével kiszámítsa a " +"tisztítási mennyiséget. Használja az egyes szálak pigment %-át és a " +"következő paramétereket" + +msgid "" +"Allow the external perimeter to merge the thin walls in the path. You can " +"deactivate this if you are using thin walls as a custom support, to reduce " +"adhesion a little." +msgstr "" +"Hagyja, hogy a külső kerület összeolvadjon a vékony falakkal az útvonalban. " +"Ezt kikapcsolhatja, ha vékony falakat használ egyéni támasztékként, hogy egy " +"kicsit csökkentse a tapadást." + +msgid "" +"Allow to create a brim over an island when it's inside a hole (or surrounded " +"by an object)." +msgstr "" +"Lehetővé teszi, hogy egy sziget fölött peremet hozzon létre, ha az egy " +"lyukban van (vagy egy tárgy veszi körül)." + msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Csak a \"%1%\" által kiválasztott felületekre enged festeni." +msgid "Also emit limits to G-code" +msgstr "A G-kódra vonatkozó határértékek kibocsátása is" + msgid "Alt + Mouse wheel" -msgstr "Alt + Egér görgő" +msgstr "ALT+egérgörgő" msgid "Alternate nozzles:" msgstr "Alternatív fúvókák:" @@ -730,6 +1030,9 @@ msgstr "" "Mindig kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " "előbeállítást választ vagy visszaállít egy előbeállítást" +msgid "Amount of lift for travel." +msgstr "Az utazáshoz szükséges felhajtóerő." + msgid "" "An existing configuration was found in %3%\n" "created by %1% %2%.\n" @@ -749,14 +1052,23 @@ msgstr "" "lesznek használva, mivel a támasztékok le vannak tiltva." msgid "An object outside the print area was detected." -msgstr "Objektum található a nyomtatási területen kívül." +msgstr "Nyomtatási területen kívül eső tárgy észlelve." msgid "" "An object outside the print area was detected.\n" "Resolve the current problem to continue slicing." msgstr "" -"Objektum található a nyomtatási területen kívül.\n" -"A szeletelés folytatásához oldja meg ezt a problémát." +"A nyomtatási területen kívül eső tárgy észlelve.\n" +"A szeletelés folytatásához oldja meg a problémát." + +msgid "Anchored" +msgstr "Horgonyzott" + +msgid " and will gradually speed-up to the above speeds over %1% layers" +msgstr " és fokozatosan felgyorsul a fenti sebességekig %1%-os rétegek felett" + +msgid "Angle cost" +msgstr "Szögköltség" msgid "Another export job is currently running." msgstr "Jelenleg egy másik exportálási feladat is fut." @@ -766,22 +1078,27 @@ msgstr "Bármelyik nyíl" msgid "" "Any modifications should be saved as a new preset inherited from this one." -msgstr "Minden módosítást új, ettől örökölt előbeállításként kell elmenteni." +msgstr "" +"Minden módosítást egy új, ebből az előbeállításból örökölt új " +"előbeállításként kell elmenteni." msgid "API key" msgstr "API kulcs" msgid "API Key / Password" -msgstr "API kulcs / jelszó" +msgstr "API Kulcs / Jelszó" + +msgid "Appearance" +msgstr "Megjelenés" msgid "Application preferences" -msgstr "Alkalmazás beállítások" +msgstr "Alkalmazási preferenciák" msgid "Apply" msgstr "Alkalmaz" msgid "Apply changes" -msgstr "Változtatások alkalmazása" +msgstr "Változások alkalmazása" msgid "Apply color change automatically" msgstr "Színváltás alkalmazása automatikusan" @@ -790,23 +1107,23 @@ msgid "Apply to all the remaining small objects being loaded." msgstr "Alkalmazza az összes hátralévő betöltendő kis objektumra." msgid "approximate seconds" -msgstr "becsült másodperc" +msgstr "megközelítőleg másodpercek" msgid "Archimedean Chords" -msgstr "Archimédészi" +msgstr "Arkhimédeszi akkordok" msgid "archive is too large" -msgstr "archív túl nagy" +msgstr "túl nagy az archívum" msgid "Are you sure you want to %1% the selected preset?" -msgstr "Biztos, hogy a kiválasztott előbeállítást %1% szeretné?" +msgstr "Biztos, hogy a kiválasztott előbeállítás %1% -át szeretné használni?" msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" -"Biztosan vissza akarja vonni a firmware feltöltését?\n" -"Emiatt a nyomtató használhatatlan állapotba kerülhet!" +"Biztos, hogy le akarja mondani a firmware égetését?\n" +"Ez használhatatlan állapotba hozhatja a nyomtatót!" msgid "Are you sure you want to continue?" msgstr "Biztos, hogy folytatni akarja?" @@ -819,29 +1136,32 @@ msgstr "" "nyomtatóról?" msgid "Are you sure you want to delete \"%1%\" printer?" -msgstr "Biztos benne, hogy törli a \"%1%\" nyomtatót?" +msgstr "Biztos, hogy törölni szeretné a \"%1%\" nyomtatót?" msgid "Are you sure you want to do it?" -msgstr "Biztos benne, hogy meg akarja csinálni?" +msgstr "Biztos, hogy ezt akarja csinálni?" + +msgid "Are you sure?" +msgstr "Biztos benne?" msgid "Area fill" -msgstr "Felület kitöltés" +msgstr "Területkitöltés" msgid "Arrange" msgstr "Elrendezés" msgid "Arrange options" -msgstr "Elrendezési lehetőségek" +msgstr "Opciók elrendezése" msgid "Arrange selection" -msgstr "Kijelöltek elrendezése" +msgstr "Válogatás rendezése" msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" -"A megadott modellek elredezése és egyetlen modellé való összevonása a " -"tárgyasztalon, hogy egyszerre lehessen végrehajtani a műveleteket." +"Rendezze el a mellékelt modelleket egy lemezen, és egyesítse őket egyetlen " +"modellben, hogy egyszeri műveletet hajthasson végre." msgid "" "Arrangement ignored the following objects which can't fit into a single " @@ -853,25 +1173,28 @@ msgstr "" "%s" msgid "Arranging" -msgstr "Elrendezés" +msgstr "Rendezés" msgid "Arranging canceled." -msgstr "Elrendezés visszavonva." +msgstr "Elrendezése törölve." msgid "Arranging done." msgstr "Elrendezés kész." msgid "Arrow Down" -msgstr "Lefelé nyíl" +msgstr "Nyíl le" msgid "Arrow Left" -msgstr "Balra nyíl" +msgstr "Nyíl balra" msgid "Arrow Right" -msgstr "Jobbra nyíl" +msgstr "Nyíl jobbra" msgid "Arrow Up" -msgstr "Felfelé nyíl" +msgstr "Nyíl fel" + +msgid "Artwork model by" +msgstr "Művészeti modell" msgid "Ask for unsaved changes in presets when creating new project" msgstr "" @@ -893,34 +1216,67 @@ msgstr "" "Kérdezzen rá az előbeállítások nem mentett módosításainak mentésére az " "alkalmazás bezárásakor vagy új projekt betöltésekor" +msgid "Associate .3mf files to %1%" +msgstr ".3mf fájlok társítása %1%-hoz" + +msgid "Associate .gcode files to %1%" +msgstr ".gcode fájlok társítása %1%-hoz" + +msgid "Associate .stl files to %1%" +msgstr ".stl fájlok társítása %1%-hoz" + +msgid "at %1%%% over all bridges" +msgstr "%1%%%-nál az összes hídnál" + +msgid "at %1%%% over bridges" +msgstr "%1%%%-nál a hidak felett" + +msgid "at %1%%% over external perimeters" +msgstr "%1%%%-ban a külső határok felett" + +msgid "at %1%%% over infill bridges" +msgstr "%1%%%-nál a töltéshidak felett" + +msgid "at %1%%% over top fill surfaces" +msgstr "%1%%%-ban a felső töltőfelületek felett" + msgid "Attention!" msgstr "Figyelem!" msgid "Authorization Type" -msgstr "Engedélyezés Típusa" +msgstr "Engedélyezés típusa" msgid "Auto generated supports" msgstr "Automatikusan generált támaszok" msgid "Auto-center parts" -msgstr "Alkatrészek automatikus középre igazítása" +msgstr "Autó-központi alkatrészek" msgid "Auto-generate points" -msgstr "Pontok automatikus generálása" +msgstr "Pontok automata generálása" msgid "Auto-repaired %1$d error" msgid_plural "Auto-repaired %1$d errors" msgstr[0] "Automatikusan megjavított %1$d hiba" msgstr[1] "Automatikusan megjavított %1$d hibák" +msgid "Auto-wipe algorithm" +msgstr "Automata törlő algoritmus" + +msgid "Auto-wipe multiplier" +msgstr "Automata törlésszorzó" + msgid "Autodetected" -msgstr "Automatikusan érzékelve" +msgstr "Automatikusan észlelt" msgid "Autogenerate support points" -msgstr "Támasztó pontok automatikus generálása" +msgstr "Támaszpontok automatikus generálása" msgid "Autogeneration will erase all manually edited points." -msgstr "Az automatikus generálás az összes manuális pontot törölni fogja." +msgstr "Az automatikus generálás törli az összes kézzel szerkesztett pontot." + +msgid "Automatic" +msgstr "Automatikus" msgid "Automatic generation" msgstr "Automatikus generálás" @@ -928,17 +1284,29 @@ msgstr "Automatikus generálás" msgid "Automatic updates" msgstr "Automatikus frissítések" +msgid "Automatic, only for small areas" +msgstr "Automatikus, csak kis területekre" + +msgid "Automatic, or anchored if too big" +msgstr "Automatikus, vagy lehorgonyzott, ha túl nagy" + +msgid "Automatic, unless full" +msgstr "Automatikus, kivéve, ha teljes" + msgid "Automatically repair an STL file" msgstr "STL fájl automatikus javítása" +msgid "Automation" +msgstr "Automatizálás" + msgid "Autospeed (advanced)" msgstr "Automatikus Sebesség (haladó)" msgid "Avoid crossing perimeters" -msgstr "Kerülje el a kerületek keresztezését" +msgstr "Kerülje a határok átlépését" msgid "Avoid crossing perimeters - Max detour length" -msgstr "Kerülje el a kerületek keresztezését - Max kerülőút hossza" +msgstr "Kerülje a határkerületek keresztezését - Maximális kerülőút hossza" msgid "BACK ARROW" msgstr "VISSZA NYÍL" @@ -949,59 +1317,75 @@ msgid "" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" -"VISSZA NYÍL azt jelzi, hogy a beállítások megváltoztak, és nem egyenlők az " -"aktuális opciócsoport utoljára mentett előbeállításával.\n" -"Kattintson az aktuális opciócsoport összes beállításának visszaállításához " -"az utoljára mentett állapotra." +"A VISSZA NYÍL ikon azt jelzi, hogy a beállítások megváltoztak, és nem " +"egyeznek meg az aktuális beállításcsoport utolsó mentett előbeállításával.\n" +"Kattintson a gombra az aktuális opciós csoport összes beállításának az " +"utolsó mentett előbeállításra történő visszaállításához." msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" -"VISSZA NYÍL ikon azt jelzi, hogy az érték megváltozott, és nem egyenlő az " -"utoljára mentett előbeállítással.\n" -"Kattintson az aktuális érték visszaállításához az utoljára mentett " -"beállításra." +"A VISSZA NYÍL ikon azt jelzi, hogy az értéket megváltoztatták, és az nem " +"egyezik meg az utolsó elmentett előbeállítással.\n" +"Kattintson a gombra az aktuális értéknek az utolsó elmentett előbeállításra " +"történő visszaállításához." msgid "Background processing" -msgstr "Feldolgozás a háttérben" +msgstr "Háttérfeldolgozás" msgid "Bail out on unknown configuration values" msgstr "Kilépés ismeretlen konfigurációs értékek esetén" msgid "Balanced" -msgstr "Kiegyensúlyozott" +msgstr "Kiegyenlített" + +msgid "Base Layer height" +msgstr "Alapréteg magassága" msgid "Bed" msgstr "Tárgyasztal" msgid "Bed custom model" -msgstr "Egyedi tárgyasztal modell" +msgstr "Ágy egyedi modell" msgid "Bed custom texture" -msgstr "Egyedi tárgyasztal textúra" +msgstr "Ágy egyedi textúra" + +msgid "Bed on thumbnail" +msgstr "Ágy a miniatűrön" msgid "Bed Shape" -msgstr "Tárgyasztal forma" +msgstr "Ágyforma" msgid "Bed shape" -msgstr "A tárgyasztal formája" +msgstr "Ágy alakja" msgid "Bed Shape and Size" -msgstr "Az tárgyasztal formája és mérete" +msgstr "Ágyforma és méret" msgid "Bed temperature" -msgstr "Tárgyasztal hőmérséklet" +msgstr "Ágy hőmérséklet" + +msgid "" +"Bed temperature for layers after the first one. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Ágyhőmérséklet a rétegek számára az első után. A nulla beállításával " +"letilthatja az ágyhőmérséklet-szabályozó parancsokat a kimeneten." msgid "Bed Temperature:" -msgstr "Tárgyasztal hőmérséklet:" +msgstr "Ágyhőmérséklet:" + +msgid "Bed/Extruder leveling" +msgstr "Ágy/extruder szintezése" msgid "Before layer change G-code" -msgstr "G-kód Rétegváltás Előtt" +msgstr "Rétegváltás előtt G-kód" msgid "Before roll back" -msgstr "Visszalépés előtt" +msgstr "Visszaállítás előtt" msgid "Below Z" msgstr "Z alatt" @@ -1009,41 +1393,53 @@ msgstr "Z alatt" msgid "Best surface quality" msgstr "Legjobb felületminőség" +msgid "Better bonding" +msgstr "Jobb kötés" + +msgid "between %1%%% %2%%% over bridges" +msgstr "%1%%% %2%%% között a hidak felett" + +msgid "between %1%%% %2%%% over external perimeters" +msgstr "%1%%% %2%%% között a külső határok felett" + +msgid "between %1%%% %2%%% over infill bridges" +msgstr "%1%%% %2%%% között a töltéshidak fölött" + msgid "Between objects G-code" -msgstr "G-kód Objektumok Között" +msgstr "Objektumok közötti G-kód" msgid "Between objects G-code (for sequential printing)" msgstr "G-kód Objektumok Között (egymás utáni nyomtatáshoz)" msgid "Block seam" -msgstr "Varrat blokkolása" +msgstr "Blokk varrás" msgid "Block supports" -msgstr "Támaszték blokkolása" +msgstr "Blokktámaszok" msgid "Block supports by angle" -msgstr "Támasztékok blokkolása szög alapján" +msgstr "Blokktartók szöggel" msgid "Bottle volume" -msgstr "Flakon térfogata" +msgstr "Palack térfogata" msgid "Bottle weight" -msgstr "A flakon súlya" +msgstr "Palack súlya" msgid "Bottom" -msgstr "Alul" +msgstr "Alsó" msgid "Bottom fill pattern" -msgstr "Alsó kitöltés mintázata" +msgstr "Alsó kitöltési minta" msgid "Bottom interface layers" msgstr "Alsó interfész rétegek" msgid "Bottom is open." -msgstr "Alsó rész nyitott." +msgstr "Alul nyitott." msgid "Bottom shell is %1% mm thick for layer height %2% mm." -msgstr "Az alsó héj %1% mm vastag a %2% mm rétegmagassághoz." +msgstr "Az alsó héj vastagsága %1% mm, rétegmagassága %2% mm." msgid "Bottom solid layers" msgstr "Alsó szilárd rétegek" @@ -1054,35 +1450,71 @@ msgstr "Alulnézet" msgid "Bridge" msgstr "Híd" +msgid "Bridge acceleration" +msgstr "Híd gyorsulás" + +msgid "Bridge calibration" +msgstr "Híd kalibrálás" + +msgid "Bridge flow calibration" +msgstr "Híd áramlási kalibráció" + msgid "Bridge flow ratio" -msgstr "Híd áramlási arány" +msgstr "Híd átfolyási aránya" msgid "Bridge infill" -msgstr "Híd kitöltés" +msgstr "Híd kitöltése" + +msgid "Bridge margin" +msgstr "Hídszegély" + +msgid "Bridge speed" +msgstr "Híd sebesség" + +msgid "Bridged" +msgstr "Áthidalt" msgid "Bridges" msgstr "Hidak" msgid "Bridges fan speed" -msgstr "Híd ventilátor sebesség" +msgstr "Hidak hűtési sebessége" + +msgid "Bridging" +msgstr "Áthidalás" msgid "Bridging angle" -msgstr "Hídkészítési szög" +msgstr "Áthidaló szög" msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" -"Hídkészítési szög felülbírálása. Ha nullán hagyja, az áthidalási szög " +"Az áthidaló szög felülírása. Ha nullára hagyja, az áthidaló szög " "automatikusan kiszámításra kerül. Ellenkező esetben a megadott szöget fogja " -"használni az összes híd esetében. Nulla szög esetén 180°-ot használjon." +"használni az összes hídnál. Használjon 180°-ot a nulla szöghez." msgid "Bridging volumetric" -msgstr "Áthidaló volumetrikus" +msgstr "Áthidaló térfogat" msgid "Brim" -msgstr "Karima" +msgstr "Perem" + +msgid "Brim configuration" +msgstr "Perem konfiguráció" + +msgid "Brim ear detection length" +msgstr "Peremfül érzékelési hossza" + +msgid "Brim ear max angle" +msgstr "Peremfül max. szög" + +msgid "Brim ears" +msgstr "Keretes fülek" + +msgid "Brim inside holes" +msgstr "Perem belső lyukak" msgid "Brim separation gap" msgstr "Karima elválasztó hézag" @@ -1091,46 +1523,81 @@ msgid "Brim type" msgstr "Karima típus" msgid "Brim width" -msgstr "Karima szélesség" +msgstr "Peremszélesség" msgid "Browse" -msgstr "Tallózás" +msgstr "Böngészés" msgid "Brush" msgstr "Ecset" msgid "Brush shape" -msgstr "Ecset forma" +msgstr "Ecset alakja" msgid "Brush size" -msgstr "Ecset méret" +msgstr "Ecset mérete" msgid "buffer too small" -msgstr "buffer túl kicsi" +msgstr "túl kicsi puffer" + +msgid "" +"But since this version of %s we don't show this information in Printer " +"Settings anymore.\n" +"Settings will be available in physical printers settings." +msgstr "" +"A %s ezen verziója óta azonban már nem jelenítjük meg ezt az információt a " +"nyomtató beállításaiban.\n" +"A beállítások a fizikai nyomtatók beállításaiban lesznek elérhetők." msgid "Buttons And Text Colors Description" -msgstr "Gombok És Szövegszínek Leírása" +msgstr "Gombok és szövegszínek Leírás" msgid "" "By default new Printer devices will be named as \"Printer N\" during its " "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" -"Alapértelmezés szerint az új nyomtatók „Printer N” nevet kapnak a " -"létrehozásuk során.\n" -"Megjegyzés: Ez a név később módosítható a fizikai nyomtató beállításainál" +"Az új nyomtatóeszközök alapértelmezés szerint \"N nyomtató\" nevet kapnak a " +"létrehozás során.\n" +"Megjegyzés: Ez a név később megváltoztatható a fizikai nyomtatók " +"beállításaiból" + +msgid "" +"by the print profile maximum volumetric rate of %3.2f mm³/s at filament " +"speed %3.2f mm/s." +msgstr "" +"a nyomtatási profil maximális térfogatgyorsasága %3,2f mm³/mp, %3,2f mm/mp " +"szálsebesség mellett." + +msgid "C&alibration" +msgstr "K&alibrálás" + +msgid "Calibration cube" +msgstr "Kalibrációs kocka" msgid "Camera" msgstr "Kamera" msgid "Camera view" -msgstr "Kamera nézet" +msgstr "Kameranézet" + +msgid "" +"Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily " +"needed" +msgstr "" +"Hasznos lehet annak elkerülésére, hogy a bondtech fogaskerekek deformálják a " +"forró hegyeket, de általában nincs rá szükség" + +msgid "Can't process the repetier return message: missing field '%s'" +msgstr "" +"Nem lehet feldolgozni az ismétlődő visszatérési üzenetet: hiányzik a '%s' " +"mező" msgid "Cancel" msgstr "Mégse" msgid "Cancel selected" -msgstr "Kijelölt visszavonása" +msgstr "Kijelöltek törlése" msgid "Cancel upload" msgstr "Feltöltés visszavonása" @@ -1139,10 +1606,10 @@ msgid "CANCELED" msgstr "VISSZAVONVA" msgid "Cancelled" -msgstr "Visszavonva" +msgstr "Törölve" msgid "Cancelling" -msgstr "Visszavonás" +msgstr "Törlés" msgid "Cancelling..." msgstr "Visszavonás..." @@ -1157,7 +1624,7 @@ msgid "" "Cannot insert a new layer range after the current layer range.\n" "Current layer range overlaps with the next layer range." msgstr "" -"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után. \n" +"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után.\n" "Az aktuális rétegtartomány átfedésben van a következő rétegtartománnyal." msgid "" @@ -1165,9 +1632,10 @@ msgid "" "The next layer range is too thin to be split to two\n" "without violating the minimum layer height." msgstr "" -"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után. \n" -"A következő rétegtartomány túl vékony ahhoz, \n" -"hogy a minimális rétegmagasság megsértése nélkül ketté lehessen osztani." +"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után.\n" +"A következő rétegtartomány túl vékony ahhoz, hogy két részre lehessen " +"osztani.\n" +"a minimális rétegmagasság megsértése nélkül." msgid "" "Cannot insert a new layer range between the current and the next layer " @@ -1176,12 +1644,12 @@ msgid "" "is thinner than the minimum layer height allowed." msgstr "" "Nem lehet új rétegtartományt beszúrni az aktuális és a következő " -"rétegtartomány közé. \n" -"Az aktuális és a következő rétegtartomány közötti hézag vékonyabb, \n" -"mint a megengedett minimális rétegmagasság." +"rétegtartomány közé.\n" +"Az aktuális és a következő rétegtartomány közötti rés\n" +"vékonyabb, mint a megengedett minimális rétegmagasság." msgid "Cannot overwrite a system profile." -msgstr "Nem lehet rendszerprofilt felülírni." +msgstr "Nem lehet felülírni egy rendszerprofilt." msgid "Cannot overwrite an external profile." msgstr "Nem lehet külső profilt felülírni." @@ -1190,14 +1658,14 @@ msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "" -"Támasztó pontok nélkül nem lehet továbblépni! Adjon hozzá támasztó pontokat, " -"vagy tiltsa le a támasztógenerálást." +"Alátámasztás nélkül nem lehet továbblépni! Adjon hozzá alátámasztást, vagy " +"tiltsa le az alátámasztás generálást." msgid "Capabilities" -msgstr "Képességek" +msgstr "Kapacitások" msgid "Capture a configuration snapshot" -msgstr "Pillanatfelvétel készítése az aktuális konfigurációról" +msgstr "Konfigurációs pillanatkép készítése" msgid "Case insensitive" msgstr "Nagy- és kisbetű érzékeny" @@ -1206,46 +1674,61 @@ msgid "Category" msgstr "Kategória" msgid "Center" -msgstr "Középre igazítás_" +msgstr "Központ" msgid "Center the print around the given center." -msgstr "A nyomtatás középre igazítása a megadott középpont körül." +msgstr "A nyomtatás központosítása a megadott középpont körül." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "Tanúsítványfájlok (*.crt, *.pem)|*.crt;*.pem|Minden fájl|*.*" +msgid "Chamber" +msgstr "Kamara" + +msgid "Chamber temperature" +msgstr "Kamra hőmérséklete" + +msgid "" +"Chamber temperature. Note that this setting doesn't do anything, but you can " +"access it in Start G-code, Tool change G-code and the other ones, like for " +"other temperature settings." +msgstr "" +"Kamrahőmérséklet. Vegye figyelembe, hogy ez a beállítás nem csinál semmit, " +"de a Start G-kódban, a Tool change G-kódban és a többiben elérheti, akárcsak " +"a többi hőmérséklet-beállításnál." + msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" -msgstr "\"%1%\" \"%2%\"-ra változtatása a \"%3%\" fizikai nyomtatóhoz." +msgstr "Módosítsa a \"%1%\"-ot \"%2%\"-ra a \"%3%\" fizikai nyomtatóhoz." msgid "Change camera type (perspective, orthographic)" -msgstr "Kamera típusának módosítása (perspektivikus, ortografikus)" +msgstr "Kamera típusának módosítása (perspektíva, ortográfiai)" msgid "Change drainage hole diameter" -msgstr "Leeresztő furat átmérőjének megváltoztatása" +msgstr "Vízelvezető lyuk átmérőjének módosítása" msgid "Change extruder" -msgstr "Extruder váltás" +msgstr "Extruder cseréje" msgid "Change Extruder" -msgstr "Extruder Váltás" +msgstr "Extruder cseréje" msgid "Change extruder (N/A)" -msgstr "Extruder váltás (N/A)" +msgstr "Extruder cseréje (N/A)" msgid "Change extruder color" msgstr "Az Extruder színének változtatása" msgid "Change Extruders" -msgstr "Extruderek Cseréje" +msgstr "Extruderek cseréje" msgid "Change Option %s" -msgstr "%s Opció Megváltoztatása" +msgstr "Opció változtatása %s" msgid "Change Part Type" -msgstr "Alkatrész Típus Módosítás" +msgstr "Alkatrész típusának módosítása" msgid "Change point head diameter" -msgstr "Tűfej átmérőjének módosítáa" +msgstr "Változási pontfej átmérője" msgid "Changelog & Download" msgstr "Változáslista & Letöltés" @@ -1254,10 +1737,10 @@ msgid "Changes for the critical options" msgstr "Változtatások a kritikus opciókhoz" msgid "Changing of an application language" -msgstr "Egy alkalmazás nyelvének megváltoztatása" +msgstr "Alkalmazási nyelv módosítása" msgid "Check for application updates" -msgstr "Alkalmazás automatikus frissítése" +msgstr "Ellenőrizze az alkalmazás frissítéseit" msgid "Check for Configuration Updates" msgstr "Konfigurációs Frissítések Keresése" @@ -1266,33 +1749,71 @@ msgid "Check for configuration updates" msgstr "Konfigurációs frissítések keresése" msgid "Choose a file to import bed texture from (PNG/SVG):" -msgstr "" -"Válasszon egy fájlt a tárgyasztal textúrájának importálásához (PNG/SVG):" +msgstr "Válasszon egy fájlt az ágy textúrájának importálásához (PNG/SVG):" msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Válasszon egy fájlt a szeleteléshez (STL/OBJ/AMF/3MF/PRUSA):" +msgstr "Válassza ki a szeletelendő fájlt (STL/OBJ/AMF/3MF/PRUSA):" msgid "Choose an STL file to import bed model from:" -msgstr "Válasszon egy STL fájlt a tárgyasztal modelljének importálásához:" +msgstr "Válasszon egy STL-fájlt a modell ágyra importálásához:" msgid "Choose an STL file to import bed shape from:" -msgstr "Válasszon egy STL-fájlt a tárgyasztal alakzatának importálásához:" +msgstr "Válasszon egy STL-fájlt az alakzat ágyra importálásához:" + +msgid "Choose how many digits after the dot for extruder moves." +msgstr "" +"Válassza ki, hogy a pont után hány számjegy következzen az extruder " +"mozgatásához." + +msgid "Choose how many digits after the dot for xyz coordinates." +msgstr "" +"Válassza ki, hogy az XYZ-koordinátákhoz hány számjegyet használjon a pont " +"után." + +msgid "Choose how the windows are selectable and displayed:" +msgstr "" +"Válassza ki, hogy az ablakok hogyan legyenek kiválaszthatók és " +"megjeleníthetők:" msgid "Choose one file (3MF/AMF):" -msgstr "Válasszon ki egy fájlt (3MF/AMF):" +msgstr "Válasszon egy fájlt (3MF/AMF):" msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "Válasszon ki egy fájlt (GCODE/.GCO/.G/.ngc/NGC):" +msgid "Choose one file (py):" +msgstr "Válassz egy fájlt (py):" + msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "Válasszon ki egy vagy több fájlt (STL/OBJ/AMF/3MF/PRUSA):" msgid "Choose SLA archive:" -msgstr "SLA archívum kiválasztása:" +msgstr "SLA archívum választása:" + +msgid "Choose the image to use as splashscreen" +msgstr "Válassza ki a kezdőképernyőként használni kívánt képet" msgid "Choose the type of firmware used by your printer." msgstr "Válassza ki a nyomtató által használt firmware típusát." +msgid "" +"Choose the way the dense layer is laid out. The automatic option lets it try " +"to draw the smallest surface with only strait lines inside the sparse " +"infill. The Anchored option just slightly enlarges (by 'Default infill " +"margin') the surfaces that need a better support." +msgstr "" +"Válassza ki a sűrű réteg elrendezésének módját. Az automatikus opció " +"lehetővé teszi, hogy a legkisebb felületet csak szűk vonalakkal próbálja " +"megrajzolni a ritka kitöltésen belül. A Rögzített opció csak kissé megnöveli " +"(az 'Alapértelmezett kitöltési margóval') azokat a felületeket, amelyeknek " +"jobb alátámasztásra van szükségük." + +msgid "Chrono" +msgstr "Kronológia" + +msgid "Chronology" +msgstr "Kronológia" + msgid "Circle" msgstr "Kör" @@ -1309,33 +1830,32 @@ msgstr "" "projekt betöltésekor." msgid "Click right mouse button to open/close History" -msgstr "Kattintson a jobb egérgombbal az előzmények megnyitásához/bezárásához" +msgstr "Kattintson a jobb egérgombal az Előzmények megnyitásához/beállításához" msgid "Click right mouse button to show arrangement options" msgstr "" -"Kattintson a jobb egérgombbal az elrendezési lehetőségek megjelenítéséhez" +"Kattintson az egér jobb gombjával az elrendezési lehetőségek megjelenítéséhez" msgid "Click the icon to change the object printable property" -msgstr "" -"Kattintson az ikonra az objektum nyomtatható tulajdonságának módosításához" +msgstr "Klikk az ikonra az objektum nyomtatható tulajdonságának módosításához" msgid "Click the icon to change the object settings" -msgstr "Kattintson az ikonra az objektumbeálltások módosításához" +msgstr "Klikk az ikonra az objektum beállításainak módosításához" msgid "Click to edit preset" -msgstr "Kattintson az előbeállítás szerkesztéséhez" +msgstr "Klikk az előbeállítás szerkesztéséhez" msgid "Click to hide" -msgstr "Kattintás az elrejtéshez" +msgstr "Kattints az elrejtéshez" msgid "Click to show" -msgstr "Kattintás a megjelenítéshez" +msgstr "Kattints a megjelenítéshez" msgid "Clip multi-part objects" -msgstr "Több részből álló objektumok vágása" +msgstr "Többrészes objektumok vágása" msgid "Clipping of view" -msgstr "A nézet vágása" +msgstr "Nézet vágása" msgid "Close" msgstr "Bezárás" @@ -1344,28 +1864,34 @@ msgid "Close holes" msgstr "Lyukak bezárása" msgid "Closing distance" -msgstr "Zárótávolság" +msgstr "Zárási távolság" msgid "Closing radius" msgstr "Zárási sugár" +msgid "Col/C" +msgstr "Col/C" + msgid "Collapse sidebar" -msgstr "&Az oldalsáv összecsukása" +msgstr "Oldalsáv összecsukása" msgid "Collapse/Expand the sidebar" -msgstr "Az oldalsáv összecsukás/kibontása" +msgstr "Oldalsáv összezárása/nagyítása" msgid "Color" msgstr "Szín" +msgid "Color %1% at extruder %2%" +msgstr "Szín %1% az extrudernél %2%" + msgid "Color change" -msgstr "Szín változtatás" +msgstr "Színváltozás" msgid "Color change (\"%1%\")" msgstr "Színváltás (\"%1%\")" msgid "Color change (\"%1%\") for Extruder %2%" -msgstr "Színváltás (\"%1%\") az Extruder %2% esetében" +msgstr "Színváltás (\"%1%\") az extrudernél %2%" msgid "Color Change G-code" msgstr "G-kód Színváltás" @@ -1374,25 +1900,28 @@ msgid "Color change G-code" msgstr "Színváltás G-kód" msgid "Color changes" -msgstr "Szín váltások" +msgstr "Színváltások" msgid "Color Print" msgstr "Színes nyomtatás" msgid "Colorprint height" -msgstr "Színes nyomtatási magasság" +msgstr "Színnyomat magassága" + +msgid "Colors" +msgstr "Színek" msgid "Combine infill every" -msgstr "Vonja össze a kitöltést minden" +msgstr "Kombinál minden kitöltést" msgid "Combine infill every n layers" -msgstr "Vonja össze a kitöltést minden n rétegben" +msgstr "Kombinálja a kitöltést minden n rétegben" msgid "Commands" msgstr "Parancsok" msgid "Comment:" -msgstr "Komment:" +msgstr "Megjegyzés:" msgid "Compare Presets" msgstr "Előbeállítások Összehasonlítása" @@ -1412,51 +1941,54 @@ msgid "Compatible print profiles" msgstr "Kompatibilis nyomtatási profilok" msgid "Compatible print profiles condition" -msgstr "Nyomtatási profil kompatibilitás feltétle" +msgstr "Kompatibilis nyomtatási profilok állapota" msgid "Compatible printers" msgstr "Kompatibilis nyomtatók" msgid "Compatible printers condition" -msgstr "Nyomtató kompatibilitás feltétele" +msgstr "Kompatibilis nyomtatók állapota" msgid "Complete individual objects" -msgstr "Egyedi objektumok befejezése" +msgstr "Teljes egyedi objektumok" msgid "COMPLETED" msgstr "KÉSZ" msgid "Completed" -msgstr "Kész" +msgstr "Befejezett" msgid "compression failed" -msgstr "becsomagolás sikertelen" +msgstr "tömörítés sikertelen" msgid "Concentric" msgstr "Koncentrikus" +msgid "Concentric (filled)" +msgstr "Koncentrikus (töltött)" + msgid "Configuration &Assistant" -msgstr "Konfigurációs Segéd" +msgstr "Konfiguráció & Asszisztens" msgid "Configuration &Wizard" -msgstr "Konfigurációs Varázsló" +msgstr "Konfiguráció & Varázsló" msgid "Configuration Assistant" -msgstr "Konfigurációs Segéd" +msgstr "Konfigurációs asszisztens" msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" "A konfigurációs csomag betöltődött, azonban néhány konfigurációs értéket nem " -"sikerült felismerni." +"ismert fel." msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" "A \"%1%\" konfigurációs fájl betöltődött, azonban néhány konfigurációs " -"értéket nem sikerült felismerni." +"értéket nem ismert fel." msgid "Configuration is edited in ConfigWizard" msgstr "A konfiguráció szerkesztése a ConfigWizardban történik_" @@ -1465,10 +1997,10 @@ msgid "Configuration is editing from ConfigWizard" msgstr "Konfiguráció szerkesztése a ConfigWizardból_" msgid "Configuration notes" -msgstr "Konfiguráció megjegyzések" +msgstr "Konfigurációs jegyzetek" msgid "Configuration Snapshots" -msgstr "Konfigurációs pillanatfelvételek" +msgstr "Konfigurációs pillanatképek" msgid "Configuration update" msgstr "Konfiguráció frissítés" @@ -1492,16 +2024,91 @@ msgstr "" "azokat." msgid "Configuration Wizard" -msgstr "Konfigurációs Varázsló" +msgstr "Konfigurációs varázsló" msgid "Confirmation" msgstr "Megerősítés" +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than infill_anchor_max is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to this parameter, but no longer than anchor_length_max. \n" +"Set this parameter to zero to disable anchoring perimeters connected to a " +"single infill line." +msgstr "" +"Csatlakoztasson egy kitöltési vonalat egy belső kerülethez egy további " +"kerület rövid szakaszával. Ha százalékban van kifejezve (példa: 15%), akkor " +"azt a kitöltési extrudálás szélességére kell számítani. A Slic3r megpróbál " +"két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha " +"nem talál ilyen, az infill_anchor_max értéknél rövidebb kerületi szegmenst, " +"akkor a kitöltési vonal csak az egyik oldalon csatlakozik egy kerületi " +"szegmenshez, és a felvett kerületi szegmens hossza erre a paraméterre " +"korlátozódik, de nem lehet hosszabb, mint a anchor_length_max érték. \n" +"Ha ezt a paramétert nullára állítja, akkor az egyetlen kitöltési vonalhoz " +"csatlakozó kerületi szakaszok lehorgonyzását kikapcsolja." + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than this parameter is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to infill_anchor, but no longer than this parameter. \n" +"If set to 0, the old algorithm for infill connection will be used, it should " +"create the same result as with 1000 & 0." +msgstr "" +"Csatlakoztasson egy kitöltési vonalat egy belső kerülethez egy további " +"kerület rövid szakaszával. Ha százalékban van kifejezve (példa: 15%), akkor " +"azt a kitöltési extrudálás szélességére kell számítani. A Slic3r megpróbál " +"két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha " +"nem talál ennél a paraméternél rövidebb kerületi szegmenst, akkor a " +"kitöltési vonal csak az egyik oldalon kapcsolódik egy kerületi szegmenshez, " +"és a felvett kerületi szegmens hossza az infill_anchor értékre korlátozódik, " +"de nem lehet hosszabb, mint ez a paraméter. \n" +"Ha 0-ra van állítva, akkor a régi algoritmus kerül alkalmazásra a kitöltés " +"összekapcsolására, ugyanolyan eredményt kell adnia, mint az 1000 & 0 értékek " +"esetén." + +msgid "Connected" +msgstr "Csatlakoztatva" + +msgid "Connected to hole perimeters" +msgstr "A lyukak pereméhez csatlakozik" + +msgid "Connected to outer perimeters" +msgstr "Külső kerülethez csatlakozik" + +msgid "Connection of bottom infill lines" +msgstr "Alsó kitöltő vonalak csatlakoztatása" + +msgid "Connection of solid infill lines" +msgstr "Tömör kitöltési vonalak csatlakoztatása" + +msgid "Connection of sparse infill lines" +msgstr "Ritkás kitöltési vonalak csatlakoztatása" + msgid "Connection of the support sticks and junctions" -msgstr "A tartópálcák és a csomópontok csatlakoztatása" +msgstr "A támasztékok és csomópontok csatlakoztatása" + +msgid "Connection of top infill lines" +msgstr "A felső kitöltő vonalak csatlakoztatása" + +msgid "Connection to %s works correctly." +msgstr "A %s kapcsolat helyesen működik." msgid "Connection to PrusaLink works correctly." -msgstr "A kapcsolat a PrusaLinkkel megfelelően működik." +msgstr "A PrusaLinkhez való csatlakozás megfelelően működik." + +msgid "Contact distance on top of supports" +msgstr "Érintkezési távolság a támaszok tetején" + +msgid "Contact distance under the bottom of supports" +msgstr "Érintkezési távolság a támaszok alja alatt" msgid "Continue" msgstr "Folytatás" @@ -1516,31 +2123,61 @@ msgid "Continue and install configuration updates?" msgstr "Folytassa és telepítse a konfigurációs frissítéseket?" msgid "Continue to activate a configuration snapshot %1%?" -msgstr "Folytatja a konfigurációs pillanatkép aktiválását: %1%?" +msgstr "Folytja a konfigurációs pillanatfelvétel aktiválását %1%?" + +msgid "" +"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " +"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand " +"Rémi and numerous others." +msgstr "" +"Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph " +"Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi és még sokan " +"mások közreműködésével." + +msgid "" +"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " +"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and " +"numerous others." +msgstr "" +"Közreműködnek: Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " +"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik és " +"számos más személy." + +msgid "Controls" +msgstr "Vezérlők" msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" -"Két szomszédos pillér közötti híd típusát határozza meg. Lehet cikk-cakk, " +"Két szomszédos pillér közötti híd típusát szabályozza. Lehet cikk-cakk, " "kereszt (dupla cikk-cakk) vagy dinamikus, amely automatikusan vált az első " "kettő között a két pillér távolságától függően." msgid "Convert from imperial units" -msgstr "Konvertálás angolszász mértékegységről" +msgstr "Átváltás birodalmi egységekből" msgid "Convert from meters" msgstr "Konvertálás metrikus mértékegységről" +msgid "Convert round holes to polyholes" +msgstr "Kerek lyukak átalakítása többlyukúvá" + msgid "Cooling" msgstr "Hűtés" +msgid "Cooling moves are gradually accelerated towards this speed. " +msgstr "A hűtési mozgások fokozatosan felgyorsulnak erre a sebességre " + +msgid "Cooling moves are gradually accelerated, starting at this speed. " +msgstr "A hűtési mozgások fokozatos gyorsulása, ezzel a sebességgel indulnak. " + msgid "Cooling tube length" msgstr "Hűtőcső hossza" msgid "Cooling tube position" -msgstr "Hűtőcső helyzete" +msgstr "Hűtőcső pozíciója" msgid "Copies of the selected object" msgstr "A kijelölt objektum másolatai" @@ -1552,13 +2189,13 @@ msgid "Copy selection to clipboard" msgstr "Kijelöltek másolása a vágólapra" msgid "Copy to clipboard" -msgstr "Másolás a vágólapra" +msgstr "Másolás vágólapra" msgid "Copy to Clipboard" -msgstr "Másolás a Vágólapra" +msgstr "Másolás a vágólapra" msgid "Copy Version Info" -msgstr "Verzióinformáció Másolása" +msgstr "Verzióinformáció másolása" msgid "Copying of file %1% to %2% failed: %3%" msgstr "A %1% fájl másolása %2%-ra nem sikerült: %3%" @@ -1586,7 +2223,7 @@ msgid "" "Error message: %1%" msgstr "" "Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült. Lehet, hogy az " -"SD kártya írásvédett?\n" +"SD-kártya írásvédett?\n" "Hibaüzenet: %1%" msgid "" @@ -1602,7 +2239,7 @@ msgid "Copyright" msgstr "Szerzői jog" msgid "Correction for expansion" -msgstr "Terjeszkedés miatti korrekció" +msgstr "Korrekció a bővítéshez" msgid "Correction for expansion in X axis" msgstr "Terjeszkedés miatti korrekció az X tengelyen" @@ -1614,36 +2251,65 @@ msgid "Correction for expansion in Z axis" msgstr "Terjeszkedés miatti korrekció az Z tengelyen" msgid "Corrections" -msgstr "Korrekciók" +msgstr "Javítások" msgid "Cost" -msgstr "Költség" +msgstr "Költségek" msgid "Cost (money)" msgstr "Költség (pénz)" +msgid "" +"Cost of moving the extruder. The highest penalty is when the point is the " +"furthest from the position of the extruder before extruding the external " +"perimeter" +msgstr "" +"Az extruder áthelyezésének költségei. A legnagyobb baj akkor van, amikor a " +"pont a legtávolabb van az extruder pozíciójától a külső kerület extrudálása " +"előtt" + +msgid "" +"Cost of placing the seam at a bad angle. The worst angle (max penalty) is " +"when it's flat." +msgstr "" +"A varrat rossz szögben történő elhelyezésének költsége. A legrosszabb szög " +"(maximális hiba) az, ha lapos." + +msgid "Cost-based" +msgstr "Költségalapú" + msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "" "Nem sikerült elrendezni a modell objektumokat! Egyes geometriák " "érvénytelenek lehetnek." +msgid "Could not connect to %s" +msgstr "Nem tudott csatlakozni %s" + msgid "Could not connect to Prusa SLA" -msgstr "Nem sikerült csatlakozni a Prusa SLA-hoz" +msgstr "Nem tudott csatlakozni a Prusa SLA-hoz" msgid "Could not connect to PrusaLink" -msgstr "Nem sikerült csatlakozni a PrusaLinkhez" +msgstr "Nem tudott csatlakozni a PrusaLinkhez" + +msgid "" +"Could not detect system SSL certificate store. The slicer will be unable to " +"establish secure network connections." +msgstr "" +"Nem sikerült felismerni a rendszer SSL-tanúsítványtárolóját. A szeletelő nem " +"tud biztonságos hálózati kapcsolatot létrehozni." msgid "Could not get a valid Printer Host reference" -msgstr "Nem sikerült érvényes nyomtató gazdagép hivatkozást szerezni" +msgstr "Nem sikerült érvényes nyomtatógazda-hivatkozást szerezni" msgid "Could not get resources to create a new connection" -msgstr "Nem állnak rendelkezésre erőforrások egy új kapcsolat létesítéséhez" +msgstr "Nem tudott erőforrásokat szerezni egy új kapcsolat létrehozásához" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Fedje le a támaszok felső érintkező rétegét hurkokkal. Alapértelmezés " -"szerint kikapcsolva." +"Fedje le a tartók felső érintkezési rétegét hurkokkal. Alapértelmezés " +"szerint letiltva." msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " @@ -1656,11 +2322,44 @@ msgstr "" "tartani." msgid "CRC-32 check failed" -msgstr "CRC32 ellenőrzés sikertelen" +msgstr "CRC-32 ellenőrzés sikertelen" + +msgid "Create a test print to help you to level your printer bed." +msgstr "" +"Készítsen egy próbanyomatot, hogy segítsen kiegyenlíteni a nyomtatóágyat." + +msgid "Create a test print to help you to set your bridge flow ratio." +msgstr "" +"Készítsen egy tesztnyomatot, amely segít a hídáramlási arány beállításában." + +msgid "" +"Create a test print to help you to set your filament extrusion multiplier." +msgstr "" +"Hozzon létre egy tesztnyomatot, hogy segítsen beállítani a szál extrudálási " +"szorzóját." + +msgid "Create a test print to help you to set your filament temperature." +msgstr "" +"Hozzon létre egy tesztnyomtatást, hogy segítsen beállítani a " +"szálhőmérsékletet." + +msgid "" +"Create a test print to help you to set your over-bridge flow ratio and " +"ironing pattern." +msgstr "" +"Készítsen próbanyomatot, hogy segítsen beállítani a híd feletti áramlási " +"arányt és a vasalási mintát." + +msgid "Create a test print to help you to set your retraction length." +msgstr "" +"Készítsen egy próbanyomatot, amely segít a behúzási hossz beállításában." + +msgid "Create an object by writing little easy script." +msgstr "Hozzon létre egy objektumot egy kis egyszerű szkript megírásával." msgid "Create pad around object and ignore the support elevation" msgstr "" -"Hozzon létre párnát az objektum körül és hagyja figyelmen kívül a támasztók " +"Hozzon létre padot az objektum körül és hagyja figyelmen kívül a támasz " "magasságát" msgid "Creating a new project" @@ -1682,19 +2381,38 @@ msgid "Cross" msgstr "Kereszt" msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Egér görgő" +msgstr "CTRL+egérgörgő" msgid "Cubic" msgstr "Kocka" +msgid "" +"CURL init has failed. The slicer will be unable to establish network " +"connections. See logs for additional details." +msgstr "" +"A CURL init sikertelen. A szeletelő nem tud hálózati kapcsolatot létrehozni. " +"További részletekért lásd a naplófájlokat." + msgid "Current preset is inherited from" -msgstr "Az aktuális előbeállítás innen öröklődik" +msgstr "Az aktuális előbeállítás a" msgid "Current preset is inherited from the default preset." -msgstr "Az aktuális előbeállítás az alapértelmezett előbeállítástól öröklődik." +msgstr "Az aktuális előbeállítás az alapértelmezett előbeállításból öröklődik." msgid "Current version:" -msgstr "Aktuális verzió:" +msgstr "Jelenlegi verzió:" + +msgid "Curve smoothing cutoff dist" +msgstr "Görbe simító vágási távolság" + +msgid "Curve smoothing minimum angle (concave)" +msgstr "Görbe simítás minimális szöge (homorú)" + +msgid "Curve smoothing minimum angle (convex)" +msgstr "Görbe simítás minimális szöge (konvex)" + +msgid "Curve smoothing precision" +msgstr "Görbe simítás pontossága" msgid "Custom" msgstr "Egyedi" @@ -1704,14 +2422,16 @@ msgid "" "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" -"Egyedi hitelesítésszolgáltatói (CA) tanúsítványfájl adható meg a HTTPS " -"OctoPrint kapcsolatokhoz, crt/pem formátumban.\n" -"\n" -"Ha üresen hagyja, akkor az operációs rendszer alapértelmezett " -"hitelesítésszolgáltatói (CA) tanúsítványtárát használja." +"Egyedi hitelesítésszolgáltatói tanúsítványfájl adható meg a HTTPS OctoPrint " +"kapcsolatokhoz, crt/pem formátumban. Ha üresen hagyja, akkor az " +"alapértelmezett operációs rendszer hitelesítésszolgáltatói tanúsítványtárat " +"használja." + +msgid "Custom Filament variables" +msgstr "Egyedi nyomtatószál változók" msgid "Custom G-code" -msgstr "Egyéni G-kód" +msgstr "Egyedi G-kód" msgid "Custom G-code on current layer (%1% mm)." msgstr "Egyedi G-kód az aktuális rétegen (%1% mm)." @@ -1719,17 +2439,23 @@ msgstr "Egyedi G-kód az aktuális rétegen (%1% mm)." msgid "Custom G-codes" msgstr "Egyedi G-kódok" +msgid "Custom Print variables" +msgstr "Egyedi nyomtatási változók" + msgid "Custom Printer" -msgstr "Egyedi Nyomtató" +msgstr "Egyedi nyomtató" msgid "Custom Printer Setup" -msgstr "Egyedi Nyomtató Beállítás" +msgstr "Egyedi nyomtató beállítása" + +msgid "Custom Printer variables" +msgstr "Egyedi nyomtató változók" msgid "Custom printer was installed and it will be activated." msgstr "Egyedi nyomtató lett telepítve, és aktiválásra került." msgid "Custom profile name:" -msgstr "Egyéni profil neve:" +msgstr "Egyéni profilnév:" msgid "" "Custom supports, seams and multimaterial painting were removed after " @@ -1739,16 +2465,25 @@ msgstr "" "háló javítása után." msgid "Custom template (\"%1%\")" -msgstr "Egyedi sablon (\"%1%\")" +msgstr "Egyéni sablon (\"%1%\")" + +msgid "Custom variables" +msgstr "Egyéni változók" msgid "Cut" msgstr "Vágás" msgid "Cut by Plane" -msgstr "Vágás Síkkal" +msgstr "Síkkal vágva" msgid "Cut model at the given Z." -msgstr "A modellt elvágása egy megadott Z-nél." +msgstr "Vágja le a modellt az adott Z-nél." + +msgid "cutoff" +msgstr "levágás" + +msgid "Cutting corners" +msgstr "Sarkok vágása" msgid "D&eselect All" msgstr "Összes Kijelölés Megszüntetése" @@ -1763,10 +2498,10 @@ msgid "Deadzone:" msgstr "Holtzóna:" msgid "decompression failed or archive is corrupted" -msgstr "kicsomagolás sikertelen, vagy az archívum sérült" +msgstr "a dekompresszió sikertelen vagy az archívum sérült" msgid "Decrease Instances" -msgstr "Példányszám Csökkentése" +msgstr "Instanciák csökkentése" msgid "default" msgstr "alapértelmezett" @@ -1774,14 +2509,17 @@ msgstr "alapértelmezett" msgid "Default" msgstr "Alapértelmezett" +msgid "Default acceleration" +msgstr "Alapértelmezett gyorsítás" + msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" -"Alapértelmezett bázisszög a kitöltés tájolásához. Erre kereszt-sorozat lesz " -"alkalmazva. A hidak a Slic3r által meghatározott lehető legjobb irányban " -"lesznek kitöltve, így ez a beállítás nem befolyásolja azokat." +"Alapértelmezett alapszög a kitöltés tájolásához. Erre kereszt-sorozat lesz " +"alkalmazva. A hidak a Slic3r által legjobban érzékelt irányban lesznek " +"kitöltve, így ez a beállítás nem befolyásolja őket." msgid "Default color" msgstr "Alapértelmezett szín" @@ -1789,28 +2527,50 @@ msgstr "Alapértelmezett szín" msgid "default color" msgstr "alapértelmezett szín" +msgid "Default distance between objects" +msgstr "Objektumok közötti alapértelmezett távolság" + +msgid "" +"Default distance used for the auto-arrange feature of the platter.\n" +"Set to 0 to use the last value instead." +msgstr "" +"A tányér automatikus rendezési funkciójának alapértelmezett távolsága.\n" +"Ha 0-ra állítja, akkor az utolsó értéket használja helyette." + +msgid "Default extrusion spacing" +msgstr "Alapértelmezett extrudálási távolság" + msgid "Default extrusion width" msgstr "Alapértelmezett extrudálási szélesség" +msgid "Default fan speed" +msgstr "Alapértelmezett ventilátor sebesség" + msgid "default filament profile" -msgstr "alapértelmezett filament profil" +msgstr "alapértelmezett szálprofil" msgid "Default filament profile" -msgstr "Alapértelmezett filament profil" +msgstr "Alapért. szálprofil" msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" -"Az aktuális nyomtatóprofilhoz tartozó alapértelmezett filament profil. Az " -"aktuális nyomtatóprofil kiválasztásakor ez a filament profil aktiválódik." +"Az aktuális nyomtatóprofilhoz tartozó alapértelmezett szálprofil. Az " +"aktuális nyomtatóprofil kiválasztásakor ez az izzószál-profil aktiválódik." + +msgid "Default first layer speed" +msgstr "Alapértelmezett első réteg sebessége" + +msgid "Default infill margin" +msgstr "Alapértelmezett kitöltési margó" msgid "default print profile" -msgstr "alapértelmezett nyomtató profil" +msgstr "alapértelmezett nyomtatási profil" msgid "Default print profile" -msgstr "Alapértelmezett nyomtatási profil" +msgstr "Alapért. nyomtatási profil" msgid "" "Default print profile associated with the current printer profile. On " @@ -1821,7 +2581,7 @@ msgstr "" "aktuális nyomtatóprofil kiválasztásakor ez a nyomtatási profil aktiválódik." msgid "default SLA material profile" -msgstr "alapértelmezett SLA anyag profil" +msgstr "alapértelmezett SLA anyagprofil" msgid "Default SLA material profile" msgstr "Alapértelmezett SLA anyagprofil" @@ -1833,13 +2593,24 @@ msgid "default value" msgstr "alapértelmezett érték" msgid "Define a custom printer profile" -msgstr "Egyéni nyomtatóprofil létrehozása" +msgstr "Egyéni nyomtatóprofil meghatározása" + +msgid "" +"Defines the pad cavity depth. Set zero to disable the cavity. Be careful " +"when enabling this feature, as some resins may produce an extreme suction " +"effect inside the cavity, which makes peeling the print off the vat foil " +"difficult." +msgstr "" +"Meghatározza a betét üregének mélységét. Az üreg kikapcsolásához állítsa be " +"a nullát. Legyen óvatos, amikor ezt a funkciót engedélyezi, mivel egyes " +"gyanták extrém szívóhatást fejthetnek ki az üregben, ami megnehezíti a " +"nyomtatás lehúzását a kádfóliáról." msgid "Delay after unloading" -msgstr "Várakozás a kiürítés után" +msgstr "Késés a kiadás után" msgid "Delete" -msgstr "Törlés" +msgstr "Töröl" msgid "delete" msgstr "törlés" @@ -1848,7 +2619,7 @@ msgid "Delete &All" msgstr "Összes törlése" msgid "Delete all" -msgstr "Összes törlése" +msgstr "Töröljön mindent" msgid "Delete All Instances from Object" msgstr "Minden példány törlése az objektumból" @@ -1860,31 +2631,31 @@ msgid "Delete color change" msgstr "Színváltás törlése" msgid "Delete color change marker for current layer" -msgstr "Színváltási jelölő eltávolítása az aktuális rétegről" +msgstr "Aktuális réteg színváltoztatási jelölőjének törlése" msgid "Delete custom G-code" -msgstr "Egyedi G-kód törlése" +msgstr "Egyéni G-kód törlése" msgid "Delete drainage hole" -msgstr "Leeresztő furat törlése" +msgstr "Vízelvezető lyuk törlése" msgid "Delete Height Range" -msgstr "Magasságtartomány Törlése" +msgstr "Magassági tartomány törlése" msgid "Delete Instance" msgstr "Példány törlése" msgid "Delete Object" -msgstr "Objektum Törlése" +msgstr "Objektum törlése" msgid "Delete Option %s" -msgstr "%s Opció Törlése" +msgstr "Opció törlése %s" msgid "Delete pause print" msgstr "Nyomtatási szünet törlése" msgid "Delete Physical Printer" -msgstr "Fizikai Nyomtató Törlése" +msgstr "Fizikai nyomtató törlése" msgid "Delete physical printer" msgstr "Fizikai nyomtató törlése" @@ -1899,34 +2670,40 @@ msgid "Delete Selected Item" msgstr "Kijelölt elem törlése" msgid "Delete Selected Objects" -msgstr "Kijelölt Objektumok Törlése" +msgstr "Kijelölt tárgyak törlése" msgid "Delete Settings" -msgstr "Beállítások Törlése" +msgstr "Beállítások törlése" msgid "Delete Subobject" msgstr "Alobjektum törlése" msgid "Delete support point" -msgstr "Támasztó pont törlése" +msgstr "Támaszpont törlése" msgid "Delete this preset" -msgstr "Előbeálltás törlése" +msgstr "Előbeállítás törlése" msgid "Delete this preset from this printer device" -msgstr "Az előbeállítás törlése erről a nyomtatóeszközről" +msgstr "Törli az előbeállítást erről a nyomtatóeszközről" msgid "Delete tick mark - Left click or press \"-\" key" -msgstr "Jelölő törlése - Bal kattintás vagy \"-\" billentyű" +msgstr "Pipa törlése - Bal klikk vagy nyomja meg a \"-\" billentyűt" msgid "Delete tool change" -msgstr "Szerszám törlése" +msgstr "Eszközváltás törlése" msgid "Deletes all objects" -msgstr "Az összes objektum törlése" +msgstr "Minden objektum törlése" msgid "Deletes the current selection" -msgstr "Az összes kijelölt objektum törlése" +msgstr "Törli az aktuális kijelölést" + +msgid "Dense infill algorithm" +msgstr "Sűrű kitöltési algoritmus" + +msgid "Dense infill layer" +msgstr "Sűrű kitöltő réteg" msgid "Density" msgstr "Sűrűség" @@ -1940,23 +2717,26 @@ msgstr "A támasz vagy tutaj első rétegének sűrűsége." msgid "Dependencies" msgstr "Függőségek" +msgid "Dere." +msgstr "Dere." + msgid "Deretraction Speed" -msgstr "Betöltési Sebesség" +msgstr "Kivonási sebesség" msgid "Deretractions" -msgstr "Előretolások_" +msgstr "Visszavonások" msgid "Descriptive name for the printer" -msgstr "A nyomtató leíró elnevezése" +msgstr "A nyomtató leíró neve" msgid "Deselect all" -msgstr "Összes kijelölés megszüntetése" +msgstr "Minden kijelölés törlése" msgid "Deselect by rectangle" -msgstr "Kijelölés megszüntetése téglalappal" +msgstr "Téglalap szerinti kijelölés megszüntetése" msgid "Deselects all objects" -msgstr "Az összes objektum kijelölésének megszüntetése" +msgstr "Minden objektum kijelölésének megszüntetése" msgid "Desktop Integration" msgstr "Asztal integráció" @@ -1968,35 +2748,57 @@ msgid "Desktop integration was successful." msgstr "Az asztal integrációja sikeres volt." msgid "Detach from system preset" -msgstr "Leválasztás a rendszer-előbeállításokról" +msgstr "Leválasztás a rendszer előre beállított értékéről" msgid "Detach preset" msgstr "Előbeállítás leválasztása" msgid "Detached" -msgstr "Független_" +msgstr "Önálló" + +msgid "" +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace). If unchecked, Slic3r may try to fit " +"perimeters where it's not possible, creating some overlap leading to over-" +"extrusion." +msgstr "" +"Egyetlen szélességű falak felismerése (olyan részek, ahol két extrudálás nem " +"fér el, és egyetlen nyomvonalba kell őket összezsúfolnunk). Ha nincs " +"bejelölve, akkor a Slic3r megpróbálhat olyan kerületeket illeszteni, ahol ez " +"nem lehetséges, és így átfedések keletkeznek, ami túlzott extrudáláshoz " +"vezet." msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" -"Az összekapcsolatlan részek felismerése és különálló objektumokra való " -"bontása az adott modell(ek)ben." +"Az adott modell(ek)ben az összekapcsolatlan részek felismerése és különálló " +"objektumokra bontása." msgid "Detected advanced data" -msgstr "Fejlett adatok érzékelve" +msgstr "Érzékelt speciális adatok" + +msgid "Detection radius" +msgstr "Érzékelési sugár" + +msgid "Determines whether toolchange temperatures will be applied" +msgstr "" +"Meghatározza, hogy a szerszámcsere hőmérsékletek alkalmazásra kerülnek-e" msgid "Device:" msgstr "Eszköz:" +msgid "Dialogs" +msgstr "Dialógusok" + msgid "Diameter" msgstr "Átmérő" msgid "Diameter in mm of the pillar base" -msgstr "A pillér alapjának átmérője mm-ben" +msgstr "Az oszlop alapjának átmérője mm-ben" msgid "Diameter in mm of the support pillars" -msgstr "A támasztó pillérek átmérője mm-ben" +msgstr "A tartóoszlopok átmérője mm-ben" msgid "Diameter of the pointing side of the head" msgstr "A fej mutató oldalának átmérője" @@ -2011,26 +2813,46 @@ msgstr "" msgid "differs from the original file" msgstr "különbözik az eredeti fájltól" +msgid "Dimension:" +msgstr "Méret:" + +msgid "Dimensional accuracy (default)" +msgstr "Méretpontosság (alapértelmezett)" + msgid "Direction" msgstr "Irány" +msgid "Disable" +msgstr "Letiltás" + +msgid "Disable 'Avoid crossing perimeters' for the first layer." +msgstr "" +"Kapcsolja ki a 'Kerülje a határok keresztezését' opciót az első rétegnél." + msgid "Disable \"%1%\"" msgstr "\"%1%\" letiltása" msgid "Disable fan for the first" -msgstr "Ventilátor letiltása az első" +msgstr "A ventilátor kikapcsolása az első" msgid "Disabled" -msgstr "Letiltva" +msgstr "Tiltva" + +msgid "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will probably be invisible)." +msgstr "" +"Letiltja a visszahúzást, ha az utazási útvonal nem haladja meg a felső réteg " +"határait (és így valószínűleg láthatatlan lesz az esetleges trutyi)." msgid "Discard" msgstr "Elvetés" msgid "Discard all custom changes" -msgstr "Összes egyedi változtatás eldobása" +msgstr "Az összes egyéni módosítás elvetése" msgid "Discard changes" -msgstr "Változtatások eldobása" +msgstr "Változások elvetése" msgid "Display" msgstr "Kijelző" @@ -2039,27 +2861,35 @@ msgid "Display height" msgstr "Kijelző magasság" msgid "Display horizontal mirroring" -msgstr "Kijelző vízszintes tükrözése" +msgstr "Vízszintes tükrözés kijelzése" msgid "Display orientation" -msgstr "Kijelző tájolás" +msgstr "Kijelző tájolása" + +msgid "Display setting icons" +msgstr "Megjelenítő beállítások ikonjai" msgid "Display the Print Host Upload Queue window" -msgstr "A Nyomtató-feltöltési várakozási sor ablak megjelenítése" +msgstr "Nyomtató gazdagép feltöltési várólista ablak" msgid "Display vertical mirroring" -msgstr "Kijelző függőleges tükrözése" +msgstr "Függőleges tükrözés kijelzése" msgid "Display width" -msgstr "Kijelző szélesség" +msgstr "Kijelző szélessége" msgid "Distance between ironing lines" -msgstr "Távolság a vasalási vonalak között" +msgstr "A vasalási vonalak közötti távolság" msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." -msgstr "Az objektumot és a generált párnát összekötő pálcák közötti távolság." +msgstr "" +"Az objektumot és a generált padot összekötő két csatlakozó pálca közötti " +"távolság." + +msgid "Distance from object" +msgstr "Távolság a tárgytól" msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " @@ -2072,13 +2902,18 @@ msgstr "A hűtőcső középpontjának távolsága az extruder csúcsától." msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware. " -msgstr "Az extruder hegyének távolsága attól a helyzettől, ahol a szál betöltetlenül parkol. Ennek meg kell egyeznie a nyomtató firmware-ében megadott értékkel. " +msgstr "" +"Az extruder csúcsának távolsága attól a helyzettől, ahol a szálcserekor " +"parkol. Ennek meg kell egyeznie a nyomtató firmware-jében szereplő értékkel. " + +msgid "Distribution" +msgstr "Forgalmazás" msgid "Divide by zero" msgstr "Nullával osztás" msgid "Do not fail if a file supplied to --load does not exist." -msgstr "Ne hibázzon, ha a --betöltéshez megadott fájl nem létezik." +msgstr "Nem hiba, ha a --load-nak megadott fájl nem létezik." msgid "" "Do not rearrange the given models before merging and keep their original XY " @@ -2092,16 +2927,15 @@ msgid "" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" -"Úgy értette, hogy %s%% , ahelyett, hogy %s %s?\n" -"Válassza az IGEN lehetőséget, ha ezt az értéket %s%%-ra kívánja " -"módosítani, \n" +"Nem a(z) %s%% helyett %s %s-ra gondol?\n" +"Válassza az IGEN lehetőséget, ha ezt az értéket %s%% kívánja módosítani, \n" "vagy a NEM-et, ha biztos benne, hogy %s %s a helyes érték." msgid "Do you want to continue changing the configuration?" msgstr "Folytatja a konfiguráció módosítását?" msgid "Do you want to delete all saved tool changes?" -msgstr "Törölni szeretné az összes mentett szerszámváltást?" +msgstr "Szeretné törölni az összes elmentett eszközváltoztatást?" msgid "Do you want to proceed?" msgstr "Akarja folytatni?" @@ -2113,20 +2947,26 @@ msgid "Do you want to save the changes to \"%1%\"?" msgstr "Menti a változásokat a következőhöz: \"%1%\"?" msgid "Do you want to save your manually edited support points?" -msgstr "Menti a manuálisan szerkesztett támaszpontjait?" +msgstr "Szeretné elmenteni a kézzel szerkesztett támogatási pontokat?" msgid "Do you want to select default filaments for these FFF printer models?" msgstr "" -"Kiválasztja az alapértelmezett filamenteket ezekhez az FFF nyomtatókhoz?" +"Szeretne alapértelmezett nyomtatószálat választani ezekhez az FFF nyomtató " +"modellekhez?" msgid "Do you want to select default SLA materials for these printer models?" -msgstr "Kiválasztja az alapértelmezett anyagokat ezekhez az SLA nyomtatókhoz?" +msgstr "" +"Szeretne alapértelmezett SLA anyagokat választani ezekhez a " +"nyomtatómodellekhez?" msgid "does not contain valid gcode." -msgstr "nem tartalmaz érvényes g-kódot." +msgstr "nem tartalmaz érvényes G-kódot." msgid "Don't arrange" -msgstr "Ne rendezzen" +msgstr "Ne rendezd" + +msgid "Don't avoid crossing on 1st layer" +msgstr "Ne kerülje el a keresztezést az 1. rétegnél" msgid "Don't import" msgstr "Ne importálja" @@ -2135,47 +2975,57 @@ msgid "Don't install" msgstr "Ne telepítse" msgid "Don't notify about new releases any more" -msgstr "Ne értesítsen többé az új megjelenésekről" +msgstr "Többé nem értesít az új kiadásokról" msgid "Don't save" msgstr "Ne mentse" msgid "Don't show again" -msgstr "Ne mutassa újra" +msgstr "Ne mutasd újra" msgid "Don't support bridges" -msgstr "Ne támassza a hidakat" +msgstr "Ne támogassa a hidakat" + +msgid "Don't switch" +msgstr "Ne váltson" + +msgid "" +"Don't wipe when you don't cross a perimeter. Need " +"'only_retract_when_crossing_perimeters'and 'wipe' enabled." +msgstr "" +"Ne töröld le, ha nem lépsz át egy határt. Szükség van a " +"'only_retract_when_crossing_perimeters'és a 'wipe' engedélyezésére." msgid "Downgrade" -msgstr "Visszafrissítés" +msgstr "Visszaminősítés" msgid "Draft shield" -msgstr "Huzatvédő" +msgstr "Pajzs tervezet" msgid "Drag" -msgstr "Húzás" +msgstr "Húz" msgid "Drag and drop G-code file" -msgstr "Húzza és ejtse a G-kód fájlt" +msgstr "Húzza és tegye le a G-kód fájlt" msgid "Drilling holes into model." -msgstr "Furatok készítése a modellbe." +msgstr "Lyukak fúrása a modellbe." msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" -"A lyukak fúrása a hálóba nem sikerült. Ezt általában a sérült modell okozza. " -"Először próbálja meg azt kijavítani." +"A lyukak fúrása a hálóba nem sikerült. Ezt általában a törött modell okozza. " +"Először próbálja meg kijavítani." msgid "Drop to bed" -msgstr "Letétel az asztalra" +msgstr "Dobd az ágyra" msgid "Duplicate" -msgstr "Megkettőzés" +msgstr "Duplikált" msgid "Duplicate by grid" -msgstr "Megkettőzés rács szerint" +msgstr "Duplikálás rács szerint" msgid "Duration" msgstr "Időtartam" @@ -2184,7 +3034,13 @@ msgid "Dynamic" msgstr "Dinamikus" msgid "E&xport" -msgstr "Exportálás" +msgstr "E&xportálás" + +msgid "Each militer add this value to the retraction value." +msgstr "Minden militer hozzáadja ezt az értéket a visszahúzási értékhez." + +msgid "Ear pattern" +msgstr "Fül mintázata" msgid "Edit" msgstr "Szerkesztés" @@ -2193,18 +3049,16 @@ msgid "Edit color" msgstr "Szín szerkesztése" msgid "Edit current color - Right click the colored slider segment" -msgstr "" -"Jelenlegi szín szerkesztése - Kattintson a jobb egérgombbal a színezett " -"csúszkaszegmensre" +msgstr "Szín szerkesztése - Jobb klikk a színezett csúszkaszegmensre" msgid "Edit custom G-code" -msgstr "Egyedi G-kód szerkesztése" +msgstr "Egyéni G-kód szerkesztése" msgid "Edit Height Range" -msgstr "Magasságtartomány szerkesztése" +msgstr "Magassági tartomány szerkesztése" msgid "Edit pause print message" -msgstr "Nyomtatási szünet üzenetének szerkesztése" +msgstr "Nyomtatási szünet üzenet szerkesztése" msgid "Edit physical printer" msgstr "Fizikai nyomtató szerkesztése" @@ -2213,10 +3067,10 @@ msgid "Edit preset" msgstr "Előbeállítás szerkesztése" msgid "Edit tick mark - Ctrl + Left click" -msgstr "Jelölő szerkesztése - Ctrl + Bal kattintás" +msgstr "Jelölés szerkesztése - CTRL+Bal klikk" msgid "Edit tick mark - Right click" -msgstr "Jelölő szerkesztése - Jobb kattintás" +msgstr "Pipa szerkesztése - Jobb klikk" msgid "Editing" msgstr "Szerkesztés" @@ -2228,54 +3082,74 @@ msgid "Ejec&t SD Card / Flash Drive" msgstr "SD Kártya / Flash meghajtó eltávolítása" msgid "Eject drive" -msgstr "Meghajtó kiadása" +msgstr "A meghajtó kiadása" msgid "Eject SD card / Flash drive" -msgstr "SD-kártya/ Flash meghajtó eltávolítása" +msgstr "SD-kártya / pendrive kivétele" msgid "Eject SD card / Flash drive after the G-code was exported to it." -msgstr "SD-kártyát / Flash meghajtót eltávolítása a G-kódot exportálása után." +msgstr "Adja ki az SD-kártyát / pendrive-ot, miután a G-kódot ráexportálta." msgid "Ejecting of device %s(%s) has failed." -msgstr "A %s(%s) eszköz eltávolítása nem sikerült." +msgstr "A %s(%s) eszköz kiadása sikertelen volt." msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" -"Az objektum túl alacsonyan van. Használja a \"Párna az objektum körül\" " -"funkciót a tárgy elemelés nélküli nyomtatásához." +"A magasság túl alacsony a tárgyhoz. Használja a \"Pad around object\" " +"funkciót a tárgy magasság nélküli nyomtatásához." + +msgid "" +"Emit something at 1 minute intervals into the G-code to let the firmware " +"show accurate remaining time." +msgstr "" +"Küldjön valamit 1 perces időközönként a G-kódba, hogy a firmware pontosan " +"mutassa a hátralévő időt." msgid "Empty layer between %1% and %2%." msgstr "Üres réteg %1% és %2% között." msgid "Enable" -msgstr "Engedélyezés" +msgstr "Engedélyez" + +msgid "Enable advanced wiping volume" +msgstr "Fokozott törlési kötet engedélyezése" msgid "Enable auto cooling" -msgstr "Automatikus hűtés engedélyezése" +msgstr "Autom. hűtés bekapcsolása" msgid "Enable dark mode" msgstr "Sötét mód engedélyezése" msgid "Enable fan if layer print time is below" +msgstr "A ventilátor engedélyezése, ha a réteg nyomtatási ideje" + +msgid "Enable Gap fill" +msgstr "Hézagkitöltés aktiválása" + +msgid "" +"Enable gap fill algorithm. It will extrude small lines between perimeters " +"when there is not enough space for another perimeter or an infill." msgstr "" -"Engedélyezze a ventilátort, ha a rétegnyomtatási idő a következő alatt van" +"Hézagkitöltő algoritmus engedélyezése. A program kis vonalakat húz a " +"peremvonalak közé, ha nincs elég hely egy másik peremvonalhoz vagy " +"kitöltéshez." msgid "Enable hollowing" msgstr "Üregesítés engedélyezése" msgid "Enable horizontal mirroring of output images" -msgstr "A kimeneti képek vízszintes tükrözése" +msgstr "A kimeneti képek vízszintes tükrözésének engedélyezése" msgid "Enable ironing" -msgstr "Vasalás engedélyezése" +msgstr "Vasalás bekapcsolása" msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "" -"Lehetővé teszi a felső rétegek vasalását a forró nyomtatófejjel a sima " -"felület érdekében" +"Engedélyezze a felső rétegek vasalását a forró nyomtatófejjel a sima felület " +"érdekében" msgid "" "Enable reading unknown configuration values by silently substituting them " @@ -2292,13 +3166,16 @@ msgstr "" "alapértelmezett értékek helyettesítése megjegyzéssel." msgid "Enable rotations (slow)" -msgstr "Forgatás engedélyezése (lassú)" +msgstr "Forgások engedélyezése (lassú)" + +msgid "Enable Skinnydip string reduction" +msgstr "Skinnydip húrcsökkentés engedélyezése" msgid "Enable support for legacy 3DConnexion devices" -msgstr "A korábbi 3DConnexion eszközök támogatásának engedélyezése" +msgstr "A régebbi 3DConnexion eszközök támogatásának engedélyezése" msgid "Enable support material generation." -msgstr "Engedélyezi a támaszanyag generálást." +msgstr "Támaszanyag-generálás engedélyezése." msgid "Enable supports for enforcers only" msgstr "Támasztékok engedélyezése csak a kényszerítőkre" @@ -2309,86 +3186,169 @@ msgid "" "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"Ha engedélyezi ezt a beállítást, akkor a G-kódban megjelölésre kerül, hogy " -"az egyes nyomtatási mozgások mely objektumhoz tartoznak, ami hasznos az " -"Octoprint CancelObject plugin számára. Ez a beállítás NEM kompatibilis a " -"Egyetlen Extruder Többféle Anyag beállítással és a Wipe into Object / Wipe " -"into Infill beállítással." +"Ha engedélyezi ezt a beállítást, akkor a G-kódba megjegyzéseket adhat, " +"amelyekben a nyomtatási mozgásokhoz tartozó objektumokat jelöljük, ami " +"hasznos az Octoprint CancelObject plugin számára. Ez a beállítás NEM " +"kompatibilis a Single Extruder Multi Material beállítással és a Wipe into " +"Object / Wipe into Infill beállítással." + +msgid "" +"Enable this to get a commented G-code file, with each line explained by " +"descriptive text. If you print from an SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" +"Ha engedélyezi ezt a funkciót, akkor egy kommentált G-kód fájlt kap, " +"amelyben minden egyes sorhoz leíró szöveg tartozik. Ha SD-kártyáról nyomtat, " +"a fájl többletsúlya miatt a firmware lelassulhat." msgid "Enable variable layer height feature" msgstr "A változó rétegmagasság funkció engedélyezése" msgid "Enable vertical mirroring of output images" -msgstr "A kimeneti képe függőleges tükrözése" +msgstr "A kimeneti képek függőleges tükrözésének engedélyezése" + +msgid "Enable wipe tower" +msgstr "Törlőtorony engedélyezése" msgid "Enabled" msgstr "Engedélyezve" +msgid "" +"Enables the creation of a support layer under the first solid layer. This " +"allows you to use a lower infill ratio without compromising the top quality. " +"The dense infill is laid out with a 50% infill density." +msgstr "" +"Lehetővé teszi az első szilárd réteg alatti alátámasztó réteg létrehozását. " +"Ez lehetővé teszi, hogy alacsonyabb kitöltési arányt használjon anélkül, " +"hogy a csúcsminőség romlana. A sűrű kitöltés 50%-os kitöltési sűrűséggel " +"kerül lefektetésre." + msgid "End G-code" msgstr "G-kód vége" msgid "Enforce" -msgstr "Kényszerítés" +msgstr "Érvényesítés" + +msgid "Enforce 100% fill volume" +msgstr "100%-os töltési térfogat érvényesítése" + +msgid "" +"Enforce a specific color on thumbnails. If not enforced, their color will be " +"the one defined by the filament." +msgstr "" +"Egy adott szín érvényre juttatása a miniatűrökön. Ha nincs érvényesítve, " +"akkor a színük a szál által meghatározott szín lesz." + +msgid "Enforce lift on first layer" +msgstr "Az első réteg felhúzásának kényszerítése" + +msgid "Enforce on first layer" +msgstr "Kényszerítés az első rétegen" msgid "Enforce seam" -msgstr "Varrat kényszerítése" +msgstr "Varrat erősítése" msgid "Enforce support for the first" -msgstr "Támasztó kényszerítése az első" +msgstr "Támaszték biztosítása az első" msgid "Enforce support for the first n layers" -msgstr "Támasztó kényszerítése az első n rétegnél" +msgstr "Az első n réteg támogatásának kikényszerítése" msgid "Enforce supports" -msgstr "Támaszték kényszerítése" +msgstr "Támogatás kikényszerítése" + +msgid "Enforce thumbnail color" +msgstr "Miniatűrök színének kikényszerítése" msgid "Enqueued" -msgstr "Sorban áll" +msgstr "Beállítva" msgid "Ensure on bed" msgstr "Ágyra igazítás" +msgid "" +"Ensure that the slicer won't add heating, fan, extruder... commands before " +"or just after your start-gcode.If set to true, you have to write a good and " +"complete start_gcode, as no checks are made anymore." +msgstr "" +"Biztosítja, hogy a szeletelő ne adjon fűtés, ventilátor, extruder... " +"parancsokat a start-G-kód előtt vagy után. Ha true-ra van állítva, akkor egy " +"jó és teljes start_gcode-ot kell írni, mivel már nem történik ellenőrzés." + msgid "Ensure vertical shell thickness" msgstr "Függőleges héjvastagság biztosítása" msgid "Enter a search term" -msgstr "Írja be a keresett kifejezést" +msgstr "Adjon meg keresési kifejezést" msgid "Enter custom G-code used on current layer" msgstr "Adja meg az aktuális rétegen használt egyéni G-kódot" +msgid "" +"Enter here the gcode to end the toolhead action, like stopping the spindle. " +"You have access to {next_extruder} and {previous_extruder}. " +"previous_extruder is the 'extruder number' of the current milling tool, it's " +"equal to the index (begining at 0) of the milling tool plus the number of " +"extruders. next_extruder is the 'extruder number' of the next tool, it may " +"be a normal extruder, if it's below the number of extruders. The number of " +"extruder is available at {extruder}and the number of milling tool is " +"available at {milling_cutter}." +msgstr "" +"Adja meg itt a gkódot a szerszámfej műveletének befejezéséhez, például az " +"orsó leállításához. Hozzáférése van a {next_extruder} és {previous_extruder} " +"értékekhez. previous_extruder az aktuális marószerszám \"extruder száma\", " +"ez egyenlő a marószerszám indexével (0-val kezdődik) plusz az extruderek " +"számával. next_extruder a következő szerszám \"extruder száma\", ez egy " +"normál extruder lehet, ha az extruderek száma alatt van. Az extruder száma a " +"{extruder} alatt, a marószerszám száma pedig a {milling_cutter} alatt érhető " +"el." + msgid "Enter new name" msgstr "Új név megadása" msgid "Enter short message shown on Printer display when a print is paused" msgstr "" -"A nyomtatás szüneteltetésekor a nyomtató kijelzőjén megjelenő rövid üzenet " -"megadása" +"A nyomtató kijelzőjén megjelenő rövid üzenet megadása a nyomtatás " +"szüneteltetésekor" msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "" -"Adja meg azt a hőmérsékletet, amely ahhoz szükséges, hogy a filament a " -"fűtött tárgyasztalhoz tapadjon." +"Adja meg az ágy hőmérsékletét, mely ahhoz szükséges, hogy a nyomtatószál " +"letapadjon." msgid "Enter the diameter of your filament." -msgstr "Adja meg a filament átmérőjét." +msgstr "Adja meg az izzószál átmérőjét." msgid "Enter the diameter of your printer's hot end nozzle." -msgstr "Adja meg a nyomtató hot end fúvókájának átmérőjét." +msgstr "Adja meg a nyomtató fúvókájának átmérőjét." msgid "Enter the height you want to jump to" -msgstr "Adja meg a magasságot, amelyre ugrani szeretne" +msgstr "Adja meg az ugrani kívánt magasságot" msgid "Enter the move you want to jump to" -msgstr "Adja meg a mozdulatot, amelyre ugrani szeretne" +msgstr "Írja be a mozdulatot, amelyre ugrani szeretne" msgid "Enter the number of copies:" -msgstr "Adja meg a szükséges példányok számát:" +msgstr "Írja be a példányszámot:" + +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling " +"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"compensate. Only the filament used for the perimeter is taken into account.\n" +"Be sure to allow enough space between objects, as this compensation is done " +"after the checks." +msgstr "" +"Adja meg azt a zsugorodási százalékot, amelyet a szál hűtés után kap (94%, " +"ha 100 mm helyett 94 mm-t mér). Az alkatrész xy-ban skálázódik, hogy " +"kompenzálja ezt. Csak a kerülethez használt filament kerül figyelembe " +"vételre.\n" +"Ügyeljen arra, hogy elegendő helyet hagyjon az objektumok között, mivel ez a " +"kompenzáció az ellenőrzések után történik." msgid "Enter the temperature needed for extruding your filament." -msgstr "Adja meg a filament extrudálásához szükséges hőmérsékletet." +msgstr "Adja meg a szál adagolásához szükséges hőmérsékletet." msgid "" "Enter weight of the empty filament spool. One may weigh a partially consumed " @@ -2396,16 +3356,17 @@ msgid "" "the calculated weight of the filament with the spool to find out whether the " "amount of filament on the spool is sufficient to finish the print." msgstr "" -"Adja meg az üres filament spulni súlyát. A nyomtatás előtt megmérheti a " -"részben elfogyasztott spulni súlyát, és összehasonlíthatja a mért súlyt a " -"számított súllyal, hogy megtudja elegendő-e az spulnin lévő filament " -"mennyisége a nyomtatás befejezéséhez." +"Adja meg az üres fonalspulni súlyát. A nyomtatás előtt megmérhetjük a " +"részben elfogyasztott szálspirált, és összehasonlíthatjuk a mért súlyt az " +"orsón lévő szál számított súlyával, hogy megtudjuk, elegendő-e az orsón lévő " +"szál mennyisége a nyomtatás befejezéséhez." msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "" -"Ide írja be a filament kg-onkénti költségét. Ez csak statisztikai információ." +"Adja meg itt a fonal kilogrammonkénti költségét. Ez csak statisztikai " +"információként szolgál." msgid "" "Enter your filament density here. This is only for statistical information. " @@ -2413,28 +3374,28 @@ msgid "" "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" -"Ide írja be a filament sűrűségét. Ez csak statisztikai információ. Jó " -"módszer egy ismert hosszúságú filamentdarab súlyának lemérése, majd a súly " -"és a térfogat arányának kiszámítása. Még jobb, ha a térfogatot közvetlenül " -"víz kiszorítással határozza meg." +"Adja meg itt a nyomtatószál sűrűségét. Ez csak statisztikai információ. Egy " +"tisztességes módszer, ha egy ismert hosszúságú szálat megmérünk, és " +"kiszámítjuk a hossz és a térfogat arányát. Jobb, ha a térfogatot közvetlenül " +"az elmozduláson keresztül számítja ki." msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" -"Ide írja be a filament átmérőjét. Jó pontosság szükséges, ezért használjon " -"tolómérőt, és végezzen többszöri mérést az izzószál mentén, majd számítsa ki " -"az átlagot." +"Adja meg itt az izzószál átmérőjét. Jó pontosságra van szükség, ezért " +"használjon mérőkalapácsot, és végezzen több mérést a szál mentén, majd " +"számítsa ki az átlagot." msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"Az nyomtató gazdagépek felsorolása nem sikerült.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" +"Az állomásnyomtatók felsorolása sikertelen volt.\n" +"Üzenet teste: \"%1%\"\n" +"Hiba: \"%2%\"" msgid "Error" msgstr "Hiba" @@ -2443,22 +3404,38 @@ msgid "ERROR" msgstr "HIBA" msgid "Error accessing port at %s: %s" -msgstr "Hiba a(z) %s port hozzáférésekor: %s" +msgstr "Hiba a port elérésekor %s: %s" msgid "Error during reload" -msgstr "Hiba újratöltés közben" +msgstr "Hiba az újratöltéskor" msgid "Error during replace" msgstr "Hiba helyettesítés közben" msgid "Error loading shaders" -msgstr "Hiba a shaderek betöltésekor" +msgstr "Hiba a shaderek betöltésében" msgid "Error Message" msgstr "Hibaüzenet" +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error." +msgstr "" +"Hiba a %1% konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja " +"meg manuálisan törölni a fájlt a hiba elhárításához." + +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error. Your user profiles will not be " +"affected." +msgstr "" +"Hiba a %1% konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja " +"meg manuálisan törölni a fájlt a hiba elhárításához. A felhasználói " +"profilokat ez nem érinti." + msgid "Error uploading to print host:" -msgstr "Hiba a nyomtató gépre való történő feltöltéskor:" +msgstr "Hiba a nyomtatási tárhelyre történő feltöltéskor:" msgid "Error while loading .gcode file" msgstr "Hiba a .gcode fájl betöltése közben" @@ -2479,7 +3456,7 @@ msgid "Error: %s" msgstr "Hiba: %s" msgid "ERROR: not enough resources to execute a new job." -msgstr "HIBA: nincs elegendő erőforrás egy új feladat végrehajtásához." +msgstr "HIBA: nincs elég erőforrás egy új feladat végrehajtásához." msgid "" "ERROR: Please close all manipulators available from the left toolbar first" @@ -2498,11 +3475,23 @@ msgstr "Páros - Páratlan" msgid "Event" msgstr "Esemény" +msgid "Exact last layer height" +msgstr "Pontos utolsó rétegmagasság" + +msgid "Exact pattern" +msgstr "Pontos minta" + +msgid "except for the first %1% layers where the fan is disabled" +msgstr "kivéve az első %1% réteget, ahol a ventilátor ki van kapcsolva" + +msgid "except for the first layer where the fan is disabled" +msgstr "kivéve az első réteget, ahol a ventilátor ki van kapcsolva" + msgid "Exit %s" msgstr "Kilépés %s" msgid "Expand sidebar" -msgstr "Az oldalsáv kibontása" +msgstr "Oldalsáv bővítése" msgid "" "Expansion of the first raft or support layer to improve adhesion to print " @@ -2518,20 +3507,89 @@ msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "" -"Kísérleti lehetőség a támasztékok létrehozásának megakadályozására az " +"Kísérleti lehetőség a hordozóanyag keletkezésének megakadályozására az " "áthidalt területek alatt." +msgid "" +"Experimental option to remove perimeters where there is nothing under them " +"and where a bridged infill should be better. \n" +" * Remove perimeters: remove the unsupported perimeters, leave the bridge " +"area as-is.\n" +" * Keep only bridges: remove the perimeters in the bridge areas, keep only " +"bridges that end in solid area.\n" +" * Keep bridges and overhangs: remove the unsupported perimeters, keep only " +"bridges that end in solid area, fill the rest with overhang perimeters" +"+bridges.\n" +" * Fill the voids with bridges: remove the unsupported perimeters, draw " +"bridges over the whole hole.* !! this one can escalate to problems with " +"overhangs shaped like /\\, so you should use it only on one layer at a time " +"via the height-range modifier!\n" +"!!Computationally intensive!!. " +msgstr "" +"Kísérleti lehetőség a peremek eltávolítására ott, ahol nincs alatta semmi, " +"és ahol egy áthidalt kitöltés jobb lenne. \n" +" * Kerületek eltávolítása: távolítsa el a nem alátámasztott kerületeket, a " +"híd területét hagyja úgy, ahogy van.\n" +" * Csak a hidak megtartása: a hídterületekről eltávolítja a kerületeket, " +"csak a szilárd területen végződő hidakat tartja meg.\n" +" * Tartsa meg a hidakat és a túlnyúlásokat: távolítsa el a nem alátámasztott " +"kerületeket, csak a szilárd területen végződő hidakat tartsa meg, a többit " +"töltse ki túlnyúlások kerületével+hidakkal.\n" +" * Töltse ki az üres helyeket hidakkal: távolítsa el a nem alátámasztott " +"kerületeket, rajzoljon hidakat az egész lyuk fölé. * !!! ez a megoldás a /\\ " +"alakú túlnyúlásoknál problémákhoz vezethet, ezért egyszerre csak egy rétegen " +"használja a magassági tartománymódosítón keresztül!\n" +"!!!Számításigényes!!! " + +msgid "" +"Experimental option which modifies (in solid infill) fill flow to have the " +"exact amount of plastic inside the volume to fill (it generally changes the " +"flow from -7% to +4%, depending on the size of the surface to fill and the " +"overlap parameters, but it can go as high as +50% for infill in very small " +"areas where rectilinear doesn't have good coverage). It has the advantage to " +"remove the over-extrusion seen in thin infill areas, from the overlap ratio" +msgstr "" +"Kísérleti opció, amely módosítja (szilárd kitöltés esetén) a kitöltés " +"áramlását, hogy a kitöltendő térfogaton belül pontosan annyi műanyag legyen, " +"amennyi a kitöltendő térfogatban van (általában -7% és +4% között " +"változtatja az áramlást, a kitöltendő felület méretétől és az átfedési " +"paraméterektől függően, de akár +50%-ig is elmehet a nagyon kis területek " +"kitöltése esetén, ahol a egyenes vonalú nem jó a lefedettség). Előnye, hogy " +"az átfedési arányból kiküszöböli a vékony kitöltési területeken " +"tapasztalható túlterjedést" + +msgid "" +"Experimental setting. Fan speeds that are too high can clash with the " +"hotend's PID routine." +msgstr "" +"Kísérleti környezet. A túl magas ventilátorsebesség összeütközésbe kerülhet " +"a fűtőberendezés PID rutinjával." + +msgid "" +"Experimental setting. May enable the hotend to cool down faster during " +"toolchanges" +msgstr "" +"Kísérleti környezet. Lehetővé teheti a nozzle gyorsabb lehűlését a " +"szerszámcserék során" + +msgid "" +"Experimental: drops nozzle temperature during cooling moves instead of prior " +"to extraction to reduce wait time." +msgstr "" +"Kísérleti: a várakozási idő csökkentése érdekében a fúvóka hőmérsékletét a " +"hűtési mozgások során, nem pedig a kivonás előtt csökkenti." + msgid "Expert mode" -msgstr "Szakértő mód" +msgstr "Szakértő mód" msgid "Export" msgstr "Exportálás" msgid "Export &Config" -msgstr "Beállítások Exportálása" +msgstr "Konfiguráció &exportálása" msgid "Export &G-code" -msgstr "G-kód Exportálása" +msgstr "G-kód &exportálás" msgid "Export &Toolpaths as OBJ" msgstr "Szerszámpálya Exportálása OBJ-ként" @@ -2540,7 +3598,9 @@ msgid "Export 3MF" msgstr "3MF exportálása" msgid "Export all presets including physical printers to file" -msgstr "Konfigurációs csomag exportálása a fizikai nyomtatókkal együtt" +msgstr "" +"Az összes előbeállítás exportálása, beleértve a fizikai nyomtatókat is, " +"fájlba" msgid "Export all presets to file" msgstr "Az összes előbeállítás exportálása fájlba" @@ -2552,34 +3612,35 @@ msgid "Export AMF file:" msgstr "AMF fájl exportálása:" msgid "Export config" -msgstr "Beállítások exportálása" +msgstr "Konfiguráció exportálása" msgid "Export Config &Bundle" -msgstr "Konfigurációs Csomag Exportálása" +msgstr "Konfigurációs csomag &exportálása" msgid "Export Config Bundle With Physical Printers" -msgstr "Konfigurációs Csomag Exportálása Fizikai Nyomtatókkal együtt" +msgstr "Konfigurációs csomag exportálása fizikai nyomtatókkal" msgid "Export current configuration to file" -msgstr "Aktuális beállítások exportálása fájlba" +msgstr "Aktuális konfiguráció exportálása fájlba" + +msgid "" +"Export current configuration to file, with only settings compatible with " +"PrusaSlicer" +msgstr "" +"Az aktuális konfiguráció exportálása fájlba, csak a PrusaSlicerrel " +"kompatibilis beállításokat tartalmazva" msgid "Export current plate as G-code" -msgstr "Az aktuális tárgyasztal exportálása G-kódként" +msgstr "Aktuális tálca exportálása G-kódként" msgid "Export current plate as G-code to SD card / Flash drive" -msgstr "Tárgyasztal Exportálása G-kódként SD Kártyára / Flash memóriára" - -msgid "Export current plate as STL" -msgstr "Tárgyasztal Exportálása STL-ként" - -msgid "Export current plate as STL including supports" -msgstr "Tárgyasztal Exportálása STL-ként támasztékokkal együtt" +msgstr "Az aktuális tálca exportálása G-kódként SD-kártyára / flash meghajtóra" msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" -"Exportálja a modellek és alkatrészforrások teljes elérési útját 3mf és amf " -"fájlokba" +"A modellek és alkatrészforrások teljes elérési útvonalának exportálása 3mf " +"és amf fájlokba" msgid "Export G-code" msgstr "G-kód exportálása" @@ -2588,7 +3649,7 @@ msgid "Export G-code to SD Card / Flash Drive" msgstr "G-kód Exportálása SD Kártyára / Flash memóriára" msgid "Export G-Code." -msgstr "G-Kód Exportálása." +msgstr "G-kód exportálása." msgid "Export OBJ" msgstr "OBJ exportálása" @@ -2597,19 +3658,13 @@ msgid "Export OBJ file:" msgstr "OBJ fájl exportálása:" msgid "Export of a temporary 3mf file failed" -msgstr "Az ideiglenes 3mf fájl exportálása nem sikerült" - -msgid "Export Plate as &STL" -msgstr "Tárgyasztal Exportálása STL-ként" - -msgid "Export Plate as STL &Including Supports" -msgstr "Tárgyasztal Exportálása STL-ként támasztékokkal együtt" +msgstr "Az ideiglenes 3mf fájl exportálása sikertelen" msgid "Export SLA" msgstr "SLA exportálása" msgid "Export sources full pathnames to 3mf and amf" -msgstr "Exportálja a források teljes elérési útját a 3mf és amf fájlokba" +msgstr "A források teljes elérési útvonalának exportálása 3mf és amf fájlba" msgid "Export STL" msgstr "STL exportálása" @@ -2618,22 +3673,25 @@ msgid "Export STL file:" msgstr "STL fájl exportálása:" msgid "Export the model(s) as 3MF." -msgstr "Modell(ek) exportálása 3MF formátumban." +msgstr "Exportálja a modellt 3MF formátumban." msgid "Export the model(s) as AMF." -msgstr "Modell(ek) exportálása AMF formátumban." +msgstr "Exportálja a modellt AMF-ként." msgid "Export the model(s) as OBJ." -msgstr "Modell(ek) exportálása OBJ formátumban." +msgstr "Exportálja a modellt OBJ formátumban." msgid "Export the model(s) as STL." -msgstr "Modell(ek) exportálása STL formátumban." +msgstr "Exportálja a modellt STL formátumban." + +msgid "Export to &Prusa Config" +msgstr "Exportálás &Prusa konfigba" msgid "Export to SD card / Flash drive" -msgstr "Exportálás SD kártyára / Flash meghajtóra" +msgstr "Exportálás SD-kártyára / pendrive-ra" msgid "Export toolpaths as OBJ" -msgstr "Szerszámpálya Exportálása OBJ-ként" +msgstr "Szerszámpályák exportálása OBJ-ként" msgid "Export." msgstr "Exportálás." @@ -2642,7 +3700,7 @@ msgid "Exporting configuration bundle" msgstr "Konfigurációs csomag exportálása" msgid "Exporting finished." -msgstr "Exportálás kész." +msgstr "Az exportálás befejeződött." msgid "Exporting G-code" msgstr "G-kód exportálása" @@ -2662,23 +3720,84 @@ msgstr "Expozíció" msgid "Exposure time" msgstr "Expozíciós idő" +msgid "ext peri first for inner side" +msgstr "ext ker először a belső oldalhoz" + +msgid "Ext peri first for outer side" +msgstr "Ext. ker. először a külső oldalra" + +msgid "Ext. peri. cut corners" +msgstr "Ext. ker. vágott sarkokat" + +msgid "Ext. peri. overlap" +msgstr "Ext. ker. átfedés" + +msgid "External" +msgstr "Külső" + msgid "External perimeter" msgstr "Külső kerület" +msgid "External perimeter fan speed" +msgstr "Külső kerületi ventilátor sebessége" + +msgid "external perimeter overlap" +msgstr "külső kerület átfedés" + msgid "external perimeters" -msgstr "külső kerületek _ nyomtatásakor" +msgstr "külső kerületeket" msgid "External perimeters" msgstr "Külső kerületek" msgid "External perimeters first" -msgstr "Külső kerületek először" +msgstr "Először a külső kerületek" + +msgid "External perimeters spacing" +msgstr "Külső kerületek távolsága" + +msgid "External perimeters speed" +msgstr "Külső kerületi sebesség" + +msgid "External perimeters width" +msgstr "Külső kerület szélessége" msgid "Extra length on restart" -msgstr "Extra hosszúság újraindításkor" +msgstr "Extra hossz az újraindításkor" msgid "Extra loading distance" -msgstr "Extra betöltési hossz" +msgstr "Extra rakodási távolság" + +msgid "Extra perimeter on odd layers" +msgstr "Extra kerület a páratlan rétegeken" + +msgid "Extra perimeters (do nothing)" +msgstr "Extra kerületek (ne csinálj semmit)" + +msgid "Extra perimeters over overhangs" +msgstr "Extra kerületek a túlnyúlások felett" + +msgid "Extra skirt lines on the first layer." +msgstr "Extra szoknyavonalak az első rétegben." + +msgid "Extra Wipe for external perimeters" +msgstr "Extra törlés a külső határokhoz" + +msgid "Extrat length on toolchange restart" +msgstr "Extrat hossz a szerszámcsere újraindításakor" + +msgid "" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on odd layers. This alternating pattern can drastically improve " +"steep overhang.\n" +"!! this is a very slow algorithm (it uses the same results as " +"extra_perimeters_overhangs) !!" +msgstr "" +"Extrudálja a páratlan rétegeknél a túlnyúlás feletti részeket a fordított " +"irányban. Ez a váltakozó mintázat drasztikusan javíthatja a meredek " +"túlnyúlásokat.\n" +"!!! Ez egy nagyon lassú algoritmus (ugyanazokat az eredményeket használja, " +"mint az extra_perimeters_overhangs) !!!" msgid "Extruder" msgstr "Extruder" @@ -2687,16 +3806,51 @@ msgid "Extruder %d" msgstr "Extruder %d" msgid "Extruder (tool) is changed to Extruder \"%1%\"" -msgstr "Az Extruder (szerszám) \"%1%\" Extruderre változott." +msgstr "Extruder (tool) is changed to Extruder \"%1%\"" msgid "Extruder changed to" -msgstr "Extruder cserélve" +msgstr "Cserélt extruder" + +msgid "Extruder clearance height" +msgstr "Extruder szabad magassága" + +msgid "Extruder clearance radius" +msgstr "Extruder távolsági sugár" msgid "Extruder Color" msgstr "Extruder színe" +msgid "Extruder decimals" +msgstr "Extruder tizedesjegyek" + +msgid "Extruder fan offset" +msgstr "Extruder ventilátor eltolás" + +msgid "" +"Extruder nozzle temperature for first layer. If you want to control " +"temperature manually during print, set zero to disable temperature control " +"commands in the output file." +msgstr "" +"Extruder fúvóka hőmérséklete az első réteghez. Ha a hőmérsékletet manuálisan " +"szeretné szabályozni a nyomtatás során, állítsa be a nullát a hőmérséklet-" +"szabályozási parancsok letiltásához a kimeneti fájlban." + +msgid "" +"Extruder nozzle temperature for layers after the first one. Set zero to " +"disable temperature control commands in the output G-code." +msgstr "" +"Az extruder fúvóka hőmérséklete az első réteg utáni rétegeknél. A nulla " +"beállításával letilthatja a hőmérséklet-szabályozási parancsokat a kimeneti " +"G-kódban." + msgid "Extruder offset" -msgstr "Extruder offset" +msgstr "Extruder eltolás" + +msgid "Extruder retraction calibration" +msgstr "Extruder visszahúzás kalibrálása" + +msgid "Extruder temp offset" +msgstr "Extruder hőmérséklet-eltolás" msgid "Extruders" msgstr "Extruderek" @@ -2711,7 +3865,7 @@ msgid "Extrusion axis" msgstr "Extrudáló tengely" msgid "Extrusion multiplier" -msgstr "Extrudáló szorzó" +msgstr "Extrudálási szorzó" msgid "Extrusion Temperature:" msgstr "Extrudálási hőmérséklet:" @@ -2720,36 +3874,44 @@ msgid "Extrusion width" msgstr "Extrudálási szélesség" msgid "Facets" -msgstr "Felületek" +msgstr "Szempontok" msgid "Faded layers" -msgstr "Áttűnő rétegek" +msgstr "Fakó rétegek" msgid "failed finding central directory" msgstr "nem sikerült megtalálni a központi könyvtárat" msgid "Failed loading file \"%1%\" due to an invalid configuration." -msgstr "A \"%1%\" fájl betöltése nem sikerült érvénytelen konfiguráció miatt." +msgstr "" +"A \"%1%\" fájl betöltése sikertelen volt érvénytelen konfiguráció miatt." msgid "Failed loading the input model." -msgstr "A bemeneti modellt betöltése nem sikerült." +msgstr "Sikertelenül töltötte be a bemeneti modellt." msgid "Failed processing of the output_filename_format template." -msgstr "" -"A kimeneti fájl formátum (output_filename_format) sablon feldolgozása nem " -"sikerült." +msgstr "Az output_filename_format sablon feldolgozása sikertelen." msgid "Failed to activate configuration snapshot." -msgstr "Nem sikerült a konfigurációs pillanatkép aktiválása." +msgstr "Nem sikerült aktiválni a konfigurációs pillanatfelvételt." msgid "Failed to drill some holes into the model" msgstr "Néhány lyukat nem sikerült a modellbe fúrni" +msgid "Fan" +msgstr "Hűtés" + +msgid "Fan KickStart time" +msgstr "Fan KickStart idő" + +msgid "Fan PWM from 0-100" +msgstr "Ventilátor PWM 0-100" + msgid "Fan speed" -msgstr "Ventilátor sebesség" +msgstr "Ventilátor sebessége" msgid "Fan Speed (%)" -msgstr "Ventillátor Sebesség (%)" +msgstr "Ventilátor sebesség (%)" msgid "" "Fan speed will be ramped up linearly from zero at layer " @@ -2765,120 +3927,150 @@ msgstr "" "\"disable_fan_fan_first_layers\" + 1 értéken a maximális megengedett " "sebességgel fog működni." +msgid "Fan startup delay" +msgstr "Ventilátor indítási késleltetés" + +msgid "fan will run by default to %1%%%" +msgstr "a ventilátor alapértelmezés szerint %1%%%-ra fog futni" + msgid "Fast" msgstr "Gyors" +msgid "Fast mode" +msgstr "Gyors mód" + msgid "Fast tilt" -msgstr "Gyors billentés" +msgstr "Gyors dőlés" msgid "Fatal error" msgstr "Végzetes hiba" msgid "Fatal error, exception catched: %1%" -msgstr "Végzetes hiba, elkapott kivétel: %1%" +msgstr "Súlyos hiba, fogadott kivétel: %1%" + +msgid "Feature" +msgstr "Funkció" msgid "Feature type" -msgstr "Részelem típus" +msgstr "Funkció típusa" msgid "Feature types" -msgstr "Részelem típus" +msgstr "Jellemző típusok" msgid "filament" -msgstr "filament" +msgstr "nyomtatószál" msgid "Filament" -msgstr "Filament" +msgstr "Nyomtatószál" msgid "Filament and Nozzle Diameters" -msgstr "Filament és Fúvóka Átmérő" +msgstr "Szál és fúvóka átmérője" msgid "Filament at extruder %1%" -msgstr "Filament %1% extrudernél _" +msgstr "Szál az extruderben %1%" + +msgid "Filament color" +msgstr "Nyomtatószál színe" + +msgid "Filament cost" +msgstr "Szál költség" msgid "Filament Diameter:" -msgstr "Filament Átmérő:" +msgstr "Nyomtatószál átmérője:" msgid "Filament End G-code" msgstr "Filament Vége G-kód" +msgid "Filament end G-code" +msgstr "Nyomtatószál G-kód vége" + +msgid "Filament Flow calibration" +msgstr "Száláramlás kalibrálása" + msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" -"A filament hűtése úgy történik, hogy oda-vissza mozgatják a hűtőcsőben. Adja " -"meg a kívánt lépések számát." +"A nyomtatószálat a hűtőcsövekben előre-hátra mozgatva hűtik. Adja meg ezen " +"mozgások kívánt számát." msgid "Filament load time" -msgstr "Filament betöltési idő" +msgstr "Izzószál betöltési ideje" msgid "Filament notes" -msgstr "Filament megjegyzések" +msgstr "Nyomtatószál jegyzetek" msgid "Filament Overrides" -msgstr "Filament Felülbírálások" +msgstr "Szál felülbírálások" msgid "Filament parking position" -msgstr "Filament parkolási pozíció" +msgstr "Nyomtatószál parkolási pozíció" msgid "Filament Profiles Selection" -msgstr "Filament Profil Kiválasztás" +msgstr "Nyomtatószál profil kiválasztása" msgid "Filament properties" msgstr "Filament tulajdonságok" msgid "Filament Settings" -msgstr "Filament Beállítások" +msgstr "Szálbeállítások" msgid "Filament Settings Tab" -msgstr "Filament Beállítások Fül" +msgstr "Szálbeállítások lap" msgid "Filament Start G-code" msgstr "Filament Kezdete G-kód" +msgid "Filament start G-code" +msgstr "Szál indítási G-kód" + +msgid "Filament temperature calibration" +msgstr "Szálhőmérséklet kalibrálás" + msgid "Filament type" -msgstr "Filament típus" +msgstr "Szál típusa" msgid "Filament unload time" -msgstr "Filament kiürítési idő" +msgstr "Szál kiadási idő" msgid "filaments" -msgstr "filamentek" +msgstr "szálak" msgid "Filaments" -msgstr "Filamentek" +msgstr "Nyomtatószálak" msgid "file close failed" -msgstr "fájl lezárás sikertelen" +msgstr "fájl bezárása sikertelen" msgid "file create failed" -msgstr "fájl létrehozás sikertelen" +msgstr "fájl létrehozása sikertelen" msgid "File for the replace wasn't selected" msgstr "A helyettesítéshez nem volt fájl kiválasztva" msgid "File Not Found" -msgstr "Fájl Nem Található" +msgstr "Fájl nem található" msgid "file not found" msgstr "fájl nem található" msgid "file open failed" -msgstr "fájl megnyitás sikertelen" +msgstr "fájl megnyitása sikertelen" msgid "file read failed" -msgstr "fájl olvasás sikertelen" +msgstr "fájl olvasása sikertelen" msgid "file seek failed" -msgstr "fájl keresés sikertelen" +msgstr "fájlkeresés sikertelen" msgid "file stat failed" -msgstr "fájl státusz sikertelen" +msgstr "fájl statisztika sikertelen" msgid "file too large" -msgstr "fájl túl nagy" +msgstr "túl nagy fájl" msgid "file write failed" -msgstr "fájl írás sikertelen" +msgstr "fájl írása sikertelen" msgid "Filename" msgstr "Fájlnév" @@ -2887,16 +4079,28 @@ msgid "Files" msgstr "Fájlok" msgid "Files association" -msgstr "Fájl társítás" +msgstr "Fájlok társítása" + +msgid "Fill" +msgstr "Kitöltés" msgid "Fill angle" msgstr "Kitöltési szög" +msgid "Fill angle increment" +msgstr "Kitöltési szög növekedése" + msgid "Fill bed" -msgstr "Tárgyasztal kitöltése" +msgstr "Ágy kitöltése" msgid "Fill density" -msgstr "Kitöltés sűrűsége" +msgstr "Kitöltési sűrűség" + +msgid "Fill the voids with bridges" +msgstr "Üres helyek kitöltése hidakkal" + +msgid "filling horizontal gaps on slopes" +msgstr "vízszintes rések kitöltése lejtőkön" msgid "Find" msgstr "Keresés" @@ -2905,13 +4109,13 @@ msgid "Find / replace patterns in G-code lines and substitute them." msgstr "A G-kód sorokban található mintázatok keresése/behelyettesítése." msgid "Finished" -msgstr "Befejeződött" +msgstr "Befejezve" msgid "Firmware" msgstr "Firmware" msgid "Firmware flasher" -msgstr "Firware feltöltő" +msgstr "Firmware égető" msgid "Firmware image:" msgstr "Firmware kép:" @@ -2920,7 +4124,7 @@ msgid "Firmware Retraction" msgstr "Firmware visszahúzás" msgid "Firmware Type" -msgstr "Firmware Típus" +msgstr "Firmware típusa" msgid "first" msgstr "első" @@ -2928,8 +4132,14 @@ msgstr "első" msgid "First layer" msgstr "Első réteg" +msgid "First layer acceleration" +msgstr "Első réteg gyorsulás" + msgid "First layer bed temperature" -msgstr "Tárgyasztal hőmérséklete az első rétegnél" +msgstr "Első réteg ágyhőmérséklet" + +msgid "First layer calibration" +msgstr "Első réteg kalibrálása" msgid "First layer density" msgstr "Első réteg sűrűsége" @@ -2937,8 +4147,17 @@ msgstr "Első réteg sűrűsége" msgid "First layer expansion" msgstr "Első réteg túlnyúlása" +msgid "First layer extruder" +msgstr "Első rétegű extruder" + +msgid "First layer flow ratio" +msgstr "Első réteg áramlási aránya" + msgid "First layer height" -msgstr "Első réteg magasság" +msgstr "Első réteg magassága" + +msgid "First layer height can't be greater than %s" +msgstr "Az első réteg magassága nem lehet nagyobb, mint %s" msgid "" "First layer height is not valid.\n" @@ -2950,19 +4169,25 @@ msgstr "" "Az első réteg magassága 0,01-re áll vissza." msgid "First layer nozzle temperature" -msgstr "Fúvóka hőmérséklet első rétegnél" +msgstr "Első réteg fúvókahőmérséklet" + +msgid "First layer spacing" +msgstr "Első réteg távolsága" msgid "First layer speed" msgstr "Sebesség az első rétegnél" msgid "First layer volumetric" -msgstr "Az első réteg volumetrikus" +msgstr "Első réteg térfogat" + +msgid "First layer width" +msgstr "Első réteg szélessége" msgid "First object layer over raft interface" msgstr "Első objektum réteg a tutaj felett" msgid "Fix through NetFabb" -msgstr "Javítás a NetFabb segítségével" +msgstr "Javítás a NetFabb-on keresztül" msgid "Fixing through NetFabb" msgstr "Javítás a NetFabb segítségével" @@ -2971,22 +4196,22 @@ msgid "Flash Printer &Firmware" msgstr "Nyomtató &Firmware Feltöltése" msgid "Flash!" -msgstr "Feltöltés!" +msgstr "Égetés!" msgid "Flashing cancelled." -msgstr "Feltöltés visszavonva." +msgstr "Égetés törölve." msgid "Flashing failed" -msgstr "Feltöltés sikertelen" +msgstr "Égetés sikertelen" msgid "Flashing failed. Please see the avrdude log below." -msgstr "Feltöltés sikertelen! Ellenőrizze az avrdude log-ot lentebb." +msgstr "Égetés nem sikerült. Kérjük, tekintse meg az alábbi avrdude naplót." msgid "Flashing in progress. Please do not disconnect the printer!" -msgstr "Feltöltés folyamatban. Ne távolítsa el a nyomtatót!" +msgstr "Égetés folyamatban. Kérjük, ne válassza le a nyomtatót!" msgid "Flashing succeeded!" -msgstr "Feltöltés sikeres!" +msgstr "Égetés sikerült!" msgid "Floating reserved operand" msgstr "Lebegő lefoglalt operandus_" @@ -2994,9 +4219,25 @@ msgstr "Lebegő lefoglalt operandus_" msgid "Flow" msgstr "Áramlás" +msgid "Flow calibration" +msgstr "Áramlás kalibrálása" + msgid "Flow rate" msgstr "Áramlási sebesség" +msgid "" +"Flow ratio to compensate for the gaps in a bridged top surface. Used for " +"ironing infillpattern to prevent regions where the low-flow pass does not " +"provide a smooth surface due to a lack of plastic. You can increase it " +"slightly to pull the top layer at the correct height. Recommended maximum: " +"120%." +msgstr "" +"Áramlási arány az áthidalt felső felület hézagainak kompenzálására. Vasalási " +"infillmintához használatos, hogy megelőzze azokat a régiókat, ahol az " +"alacsony áramlású átmenettel nem lehet sima felületet biztosítani a műanyag " +"hiánya miatt. Kicsit növelheti, hogy a felső réteget a megfelelő magasságban " +"húzza. Ajánlott maximális érték: 120%." + msgid "" "Following printer preset is duplicated:%1%The above preset for printer \"%2%" "\" will be used just once." @@ -3029,6 +4270,9 @@ msgid_plural "Folowing models repair failed" msgstr[0] "A következő modell javítása nem sikerült" msgstr[1] "A következő modellek javítása nem sikerült" +msgid "Font size" +msgstr "Jelkészlet mérete" + msgid "" "For a multipart object, this value isn't accurate.\n" "It doesn't take account of intersections and negative volumes." @@ -3036,6 +4280,9 @@ msgstr "" "Egy többrészes objektum esetében ez az érték nem pontos.\n" "Nem veszi figyelembe a metszeteket és a negatív térfogatokat." +msgid "For more information please visit Prusa wiki page:" +msgstr "További információkért látogasson el a Prusa wiki oldalára:" + msgid "For new project all modifications will be reseted" msgstr "Új projekt esetén az összes módosítás visszaállításra kerül" @@ -3047,80 +4294,108 @@ msgstr "" "segítségével egyesítjük. A zárási sugárnál kisebb hézagok kitöltésre " "kerülnek." +msgid "" +"For stock extruders, usually 40-42mm. For bondtech extruder upgrade, " +"usually 30-32mm. Start with a low value and gradually increase it until " +"strings are gone. If there are blobs on your wipe tower, your value is too " +"high." +msgstr "" +"A készleten lévő extrudereknél általában 40-42 mm. Bondtech extruder " +"upgrade esetén általában 30-32 mm. Kezdje alacsony értékkel, és fokozatosan " +"növelje, amíg a szálak el nem tűnnek. Ha pacák vannak a törlőtornyon, akkor " +"az érték túl magas." + msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" -"bal gomb esetén: nem rendszer (vagy nem alapértelmezett) előbeállítás " -"értéket jelez,\n" -"jobb gomb esetén: azt jelzi, hogy a beállításokat nem módosították." +"a bal oldali gomb esetében: nem rendszerbeli (vagy nem alapértelmezett) " +"előbeállítást jelez,\n" +"a jobb oldali gomb esetében: azt jelzi, hogy a beállítások nem lettek " +"módosítva." msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "" -"Ahhoz, hogy a törlőtorony működjön az oldható támasztékokkal, a támasztó " -"rétegeket szinkronizálni kell az objektum rétegeivel." +"Ahhoz, hogy a Wipe Tower működjön az oldható támasztékokkal, a " +"tartórétegeket szinkronizálni kell az objektumrétegekkel." msgid "" "For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers." msgstr "" -"Ahhoz, hogy a törlőtorony működjön az oldható támaszokkal, a " -"támaszrétegeket\n" -"szinkronizálni kell az objektumrétegekkel." +"Ahhoz, hogy a Törlőtorony az oldható hordozókkal működjön, a\n" +"hordozórétegek szinkronizálni kell az objektumrétegekkel." msgid "Force pad around object everywhere" -msgstr "Párna kényszerítése az objektum körül mindenhol" +msgstr "Erőpad az objektum körül mindenhol" msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" -"Tömör kitöltés használata a megadott küszöbértéknél kisebb területű régiók " -"esetében." +"Tömör kitöltés kikényszerítése a megadott küszöbértéknél kisebb területű " +"régiók esetében." msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" -"Kényszerítse a tömör héjak létrehozását a szomszédos anyagok/térfogatok " -"között. Hasznos több extruderrel történő áttetsző vagy feloldható anyagokkal " -"való nyomtatáskor." +"Kényszerítse a szilárd héjak létrehozását a szomszédos anyagok/térfogatok " +"között. Hasznos több extruderes nyomatokhoz áttetsző anyagokkal vagy " +"manuálisan oldható hordozóanyaggal." msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" -"Előre kompatibilitási szabály konfigurációs és projektfájlokból (3MF, AMF) " -"történő konfiguráció betöltéskor." +"Előre kompatibilitási szabály konfigurációs fájlok és projektfájlok (3MF, " +"AMF) konfigurációinak betöltésekor." msgid "Found reserved keywords in" msgstr "Fenntartott kulcsszavakat találtam az" +msgid "FreeCAD path" +msgstr "FreeCAD útvonal" + +msgid "FreeCad python script" +msgstr "FreeCad python szkript" + +msgid "FreePySCAD : script engine for FreeCAD" +msgstr "FreePySCAD : szkript motor a FreeCAD-hez" + msgid "from" -msgstr "tól" +msgstr "-tól, -től" msgid "From" -msgstr "Erről" +msgstr "Tól,-től" + +msgid "from brim" +msgstr "peremtől" + +msgid "From filament" +msgstr "Nyomtatószálból" msgid "From Object List You can't delete the last solid part from object." msgstr "" -"Az objektumlistából nem törölheti az utolsó szilárd alkatrészt az " -"objektumból." +"Az objektumlistából Nem törölheti az utolsó tömör alkatrészt az objektumból." + +msgid "From plane" +msgstr "Síkból" msgid "Front" -msgstr "Elöl" +msgstr "Első" msgid "Front View" -msgstr "Elölnézet" +msgstr "Előlnézet" msgid "Full fan speed at layer" -msgstr "Teljes ventilátorsebesség a következő rétegnél" +msgstr "Max. ventilátorsebesség a rétegnél" msgid "full profile name" -msgstr "teljes profil név" +msgstr "teljes profilnév" msgid "Fullscreen" msgstr "Teljes képernyő" @@ -3148,13 +4423,13 @@ msgid "" "Editing it will cause changes of Slider data." msgstr "" "Az ehhez a jelöléshez tartozó G-kód konfliktusban van a nyomtatási móddal.\n" -"Szerkesztése a Csúszkák adatainak megváltozását okozza." +"Szerkesztése a csúszkák adatainak megváltozását okozza." msgid "G-code file exported to %1%" msgstr "G-kód fájl exportálva ide: %1%" msgid "G-code flavor" -msgstr "G-kód változat" +msgstr "G-kód íz" msgid "G-code preview" msgstr "G-kód előnézet" @@ -3165,6 +4440,12 @@ msgstr "G-kód felbontása" msgid "G-code substitutions" msgstr "G-kód helyettesítések" +msgid "G-Code to switch from this toolhead" +msgstr "G-kód az eszközfej váltásához" + +msgid "G-Code to switch to this toolhead" +msgstr "G-kód az eszközfej váltáshoz" + msgid "G-code viewer" msgstr "G-kód nézegető" @@ -3177,18 +4458,44 @@ msgstr "g/ml" msgid "Gap fill" msgstr "Hézag kitöltés" +msgid "Gap fill overlap" +msgstr "Hézagkitöltés átfedés" + +msgid "Gap fill speed" +msgstr "Hézagkitöltési sebesség" + +msgid "Gapfill after last perimeter" +msgstr "Hézagkitöltés az utolsó kerület után" + +msgid "Gcode done" +msgstr "G-kód kész" + +msgid "GCode Pre&view Tab" +msgstr "G-kód elő&nézeti lap" + +msgid "Gcode preview" +msgstr "G-kód előnézet" + msgid "General" msgstr "Általános" +msgid "Generate" +msgstr "Generál" + +msgid "Generate 10% intervals around current value" +msgstr "Generálás 10% intervallum értékek körül" + +msgid "Generate 2% intervals below current value" +msgstr "Az aktuális érték alatti 2% intervallumok generálása" + msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" -"A szoknya úgy lesz létrehozva, hogy az alsó rétegen annyi hurokból álljon, " -"hogy legalább az itt meghatározott mennyiségű Filament felhasználásra " -"kerüljön hozzá. Több Extruderrel működő gépek esetén ez a beállítás minden " -"egyes Extruderre vonatkozik." +"Legalább annyi szoknyahurkot kell létrehozni, amennyi az alsó réteg " +"meghatározott mennyiségű nyomtatószál elhasználásához szükséges. Több " +"extruderes gépnél ez a minimum minden egyes extruderre vonatkozik." msgid "Generate support material" msgstr "Támaszanyag létrehozása" @@ -3199,44 +4506,55 @@ msgid "" "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" -"Támasztót generál az első megadott számú réteghez, alulról számolva, " -"függetlenül attól, hogy a normál támasz engedélyezve van-e vagy sem, és " -"függetlenül bármilyen szögküszöbtől. Ez hasznos nagyon vékony vagy gyenge " -"talpfelülettel rendelkező objektumok jobb tapadásának eléréséhez a " -"tárgyasztalhoz." +"Támogatóanyagot generál a megadott számú réteghez, alulról számolva, " +"függetlenül attól, hogy a normál támogatóanyag engedélyezve van-e vagy sem, " +"és függetlenül bármilyen szögküszöbtől. Ez hasznos a nagyon vékony vagy " +"gyenge talppal rendelkező objektumok nagyobb tapadásának eléréséhez az ágyon." msgid "Generate supports" -msgstr "Támasztók generálása" +msgstr "Támasztékok generálása" msgid "Generate supports for the models" -msgstr "Támasztók generálása a modellekhez" +msgstr "Támasztékok generálása a modellekhez" msgid "generated warnings" msgstr "generált figyelmeztetések" +msgid "Generating brim" +msgstr "Peremet generál" + msgid "Generating G-code" msgstr "G-kód generálása" +msgid "Generating G-code layer %s / %s" +msgstr "G-kód réteg generálása %s / %s" + msgid "Generating index buffers" -msgstr "Index puffer generálása" +msgstr "Indexpufferek generálása" msgid "Generating pad" -msgstr "Alátét generálása" +msgstr "Generáló pad" msgid "Generating perimeters" msgstr "Kerületek generálása" +msgid "Generating perimeters: layer %s / %s" +msgstr "Kerületek generálása: réteg %s / %s" + +msgid "Generating skirt" +msgstr "Szoknyát generál" + msgid "Generating skirt and brim" msgstr "Szoknya és karima generálása" msgid "Generating support material" -msgstr "Támaszanyag generálása" +msgstr "Támasztékok létrehozása" msgid "Generating support points" -msgstr "Támasztó pontok generálása" +msgstr "Támaszpontok létrehozása" msgid "Generating support tree" -msgstr "Támasztó fa generálása" +msgstr "Támogatási fa generálása" msgid "Generating toolpaths" msgstr "Szerszámpályák generálása" @@ -3244,8 +4562,17 @@ msgstr "Szerszámpályák generálása" msgid "Generating vertex buffer" msgstr "Vertex puffer generálása" +msgid "" +"Give to the infill algorithm if the infill needs to be connected, and on " +"which perimeters Can be useful for art or with high infill/perimeter " +"overlap. The result may vary between infill types." +msgstr "" +"Adja meg a kitöltési algoritmusnak, ha a kitöltést össze kell kötni, és mely " +"kerületeken lehet hasznos a művelet vagy a nagy kitöltés/kerületi átfedés " +"esetén. Az eredmény kitöltési típusonként eltérő lehet." + msgid "Gizmo cut" -msgstr "Gizmo vágása" +msgstr "Gizmo vágás" msgid "Gizmo FDM paint-on seam" msgstr "Gizmo FDM varrat festés" @@ -3254,131 +4581,161 @@ msgid "Gizmo FDM paint-on supports" msgstr "Gizmo FDM támaszték festés" msgid "Gizmo move" -msgstr "Gizmo mozgatása" +msgstr "Gizmo mozgás" msgid "Gizmo move: Press to snap by 1mm" -msgstr "Gizmo mozgatása: Nyomja meg az 1 mm-rel elmozgatáshoz" +msgstr "Gizmo mozdulat: Nyomja meg, hogy 1 mm-rel elpattanjon" msgid "Gizmo Multi Material painting" msgstr "Gizmo Többanyagú festés" msgid "Gizmo Place face on bed" -msgstr "Gizmo felület tárgyasztalra illesztése" +msgstr "Gizmo Helyezze az arcát az ágyra" msgid "Gizmo rotate" -msgstr "Gizmo forgatása" +msgstr "Gizmo forgatás" msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" -"Gizmo forgatása: Nyomja meg a kiválasztott objektumok saját középpontjuk " -"körül történő elforgatásához" +"Gizmo forog: Nyomja meg a kiválasztott objektumok saját középpontjuk körül " +"történő elforgatásához" msgid "Gizmo scale" -msgstr "Gizmo skálázása" +msgstr "Gizmo skála" msgid "Gizmo scale: Press to activate one direction scaling" -msgstr "Gizmo skálázása: Nyomja meg az egyirányú skálázás aktiválásához" +msgstr "Gizmo skála: Nyomja meg az egyirányú skálázás aktiválásához" msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" -"Gizmo skálázása: Nyomja meg a kiválasztott objektumok saját középpontjuk " -"körüli skálázásához" +"Gizmo skála: Nyomja meg a kiválasztott objektumok saját középpontjuk körüli " +"méretezéséhez" msgid "Gizmo scale: Press to snap by 5%" -msgstr "Gizmo mozgatása: Nyomja meg az 5%-kal elmozgatáshoz" +msgstr "Gizmo skála: 5%-kal történő elpattintáshoz nyomja meg" msgid "Gizmo scale: Scale selection to fit print volume" -msgstr "" -"Gizmo skálázása: A kiválasztás skálázása a nyomtatási térfogathoz igazodva" +msgstr "Gizmo skála: Méretválasztás a nyomtatási térfogathoz igazodva" msgid "Gizmo SLA hollow" -msgstr "Gizmo SLA üreg" +msgstr "Gizmo SLA üreges" msgid "Gizmo SLA support points" -msgstr "Gizmo SLA támaszték pontok" +msgstr "Gizmo SLA támasztási pontok" msgid "Gizmo-Move" -msgstr "Gizmo-Mozgatása" +msgstr "Gizmo Mozgás" msgid "Gizmo-Place on Face" -msgstr "Gizmo- Felület Tárgyasztalra Illesztése" +msgstr "Gizmo-Helyezd az arcra" msgid "Gizmo-Rotate" -msgstr "Gizmo-Forgatása" +msgstr "Gizmo forgatás" msgid "Gizmo-Scale" msgstr "Gizmo-Skála" msgid "Gizmos" -msgstr "Gizmok" +msgstr "Gizmók" msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, 3-as verzió" +msgid "Goal:" +msgstr "Cél:" + msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" -"Jó pontosság szükséges, ezért használjon tolómérőt, és végezzen többszöri " -"mérést a filament mentén, majd számítsa ki az átlagot." +"Jó pontosságra van szükség, ezért használjon tolómérőt, és végezzen több " +"mérést a szál mentén, majd számítsa ki az átlagot." + +msgid "" +"Grey values means that they can't be send to your firmware (no g-code " +"available)." +msgstr "" +"A szürke értékek azt jelentik, hogy nem küldhetők el a firmware-nek (nem áll " +"rendelkezésre G-kód)." msgid "Grid" -msgstr "Háló" +msgstr "Rács" msgid "Group" msgstr "Csoport" msgid "Group manipulation" -msgstr "Csoport manipuláció" +msgstr "Csoportos manipuláció" msgid "GUI" msgstr "GUI" msgid "Gyroid" -msgstr "Gyroid" +msgstr "Giroid" msgid "Head diameter" -msgstr "Fej átmérő" +msgstr "Fej átmérője" msgid "Head penetration" -msgstr "Fej benyúlás" +msgstr "Fej behatolás" msgid "Head penetration should not be greater than the head width." msgstr "A fej benyúlása nem lehet nagyobb, mint a fej szélessége." +msgid "" +"Heated build plate temperature for the first layer. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Fűtött építőlemez hőmérséklete az első réteghez. Állítsa nullára az " +"ágyhőmérséklet-szabályozó parancsok letiltásához a kimeneten." + msgid "Height" msgstr "Magasság" msgid "Height (mm)" msgstr "Magasság (mm)" +msgid "height in layers" +msgstr "magasság rétegenként" + +msgid "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." +msgstr "" +"A szoknya magassága rétegekben kifejezve. Állítsa ezt magas értékre, ha a " +"szoknyát a huzat elleni védőpajzsként kívánja használni." + msgid "Height of the display" -msgstr "Kijelző magassága" +msgstr "A kijelző magassága" msgid "Height ranges" -msgstr "Magasságtartományok" +msgstr "Magassági tartományok" msgid "Height:" msgstr "Magasság:" msgid "Heights at which a filament change is to occur. " -msgstr "Magasságok, amelyeken filamenteket kell váltani. " +msgstr "" +"Azok a magasságok, amelyeknél az nyomtatószál-váltásnak meg kell történnie. " msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" -"Üdvözli a %s! Ez a %s segít a kezdeti beállításokban. Csak néhány beállítás, " -"és máris nyomtathat." +"Helló, üdvözöljük a %s oldalon! Ez a %s segít a kezdeti konfigurációban; " +"csak néhány beállítás, és máris készen áll a nyomtatásra." msgid "Help" msgstr "Súgó" msgid "Help (FFF options)" -msgstr "Súgó (FFF lehetőségek)" +msgstr "Súgó (FFF opciók)" msgid "Help (SLA options)" -msgstr "Súgó (SLA lehetőségek)" +msgstr "Súgó (SLA opciók)" + +msgid "Help / Details:" +msgstr "Súgó / Részletek:" msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " @@ -3387,41 +4744,48 @@ msgstr "" "Itt állíthatja be a szükséges öblítési térfogatot (mm³) bármely adott " "szerszámpárhoz." +msgid "" +"Here you can put your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" +"Itt helyezheti el személyes jegyzeteit. Ez a szöveg a G-kód fejlécének " +"megjegyzéseihez kerül hozzáadásra." + msgid "Hide ruler" msgstr "Vonalzó elrejtése" msgid "High extruder current on filament swap" -msgstr "Magas extruderáram a szálcserénél" +msgstr "Magas extruderáram szálcserénél" msgid "Higher print quality versus higher print speed." -msgstr "Jobb nyomtatási minőség vagy nagyobb nyomtatási sebesség." +msgstr "Magasabb nyomtatási minőség a nagyobb sebességgel szemben." msgid "Highlight overhang by angle" msgstr "Túlnyúlás kijelölése szöggel" msgid "Hilbert Curve" -msgstr "Hilbert-görbe" +msgstr "Hilbert görbe" msgid "Hold Shift to Slice & Export G-code" -msgstr "Tartsa lenyomva a Shiftet szeleteléshez és a G-kód exportálásához" +msgstr "Tartsa lenyomva a Shiftet a G-kód szeleteléséhez és exportálásához" msgid "Hole depth" -msgstr "Furat mélység" +msgstr "Furat mélysége" msgid "Hole diameter" -msgstr "Furat átmérő" +msgstr "Furat átmérője" msgid "Hollow and drill" -msgstr "Üregelés és fúrás" +msgstr "Üreges és fúró" msgid "Hollow out a model to have an empty interior" -msgstr "Üregesítse a modellt, hogy üres legyen a belseje" +msgstr "Üregesítsük ki a modellt, hogy üres belső teret kapjunk" msgid "Hollow this object" -msgstr "Objektum üregessé tétele" +msgstr "Üreges a tárgy" msgid "Hollowing" -msgstr "Üregesítés" +msgstr "Vájat" msgid "" "Hollowing is done in two steps: first, an imaginary interior is calculated " @@ -3430,17 +4794,16 @@ msgid "" "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" -"Az üregesítés két lépésben történik: először egy mélyebb képzeletbeli belső " -"teret számolunk ki az objektum belsejében (ofszet plusz a zárótávolság), " -"majd azt visszatöltjük a megadott eltolásig. A nagyobb zárótávolság " -"lekerekíti a belső teret. Nulla értéknél a belső tér leginkább a külsőhöz " -"fog hasonlítani." +"Az üregesítés két lépésben történik: először egy képzeletbeli belső teret " +"számolunk ki az objektum mélyebbre (eltolás plusz a zárótávolság), majd " +"visszatöltjük a megadott eltolásig. A nagyobb zárótávolság lekerekíti a " +"belső teret. Nulla értéknél a belső tér leginkább a külsőhöz fog hasonlítani." msgid "Hollowing model" -msgstr "Modell üregesítése" +msgstr "Üreges modell" msgid "Hollowing parameter change" -msgstr "Üregesítési paraméter megváltoztatása" +msgstr "Üregesítési paraméterek módosítása" msgid "Honeycomb" msgstr "Méhsejt" @@ -3449,22 +4812,41 @@ msgid "Horizontal shells" msgstr "Vízszintes héjak" msgid "Horizontal Slider" -msgstr "Vízszintes Csúszka" +msgstr "Vízszintes csúszka" msgid "Horizontal slider - Move active thumb Left" -msgstr "Vízszintes csúszka - Aktív jelölő mozgatása Balra" +msgstr "Vízszintes csúszka - Az aktív hüvelykujj balra mozgatása" msgid "Horizontal slider - Move active thumb Right" -msgstr "Vízszintes csúszka - Aktív jelölő mozgatása Jobbra" +msgstr "Vízszintes csúszka - Az aktív hüvelykujj jobbra mozgatása" + +msgid "" +"Horizontal width of the brim that will be printed inside each object on the " +"first layer." +msgstr "" +"A perem vízszintes szélessége, amely az első réteg minden egyes objektumának " +"belsejébe kerül nyomtatásra." + +msgid "" +"Horizontal width of the skirt that will be printed around each object. If " +"left as zero, first layer extrusion width will be used if set and the skirt " +"is only 1 layer height, or perimeter extrusion width will be used (using the " +"computed value if not set)." +msgstr "" +"Az egyes objektumok köré nyomtatott szoknya vízszintes szélessége. Ha nullán " +"hagyja, akkor az első réteg extrudálási szélessége lesz használva, ha be van " +"állítva, és a szoknya csak 1 réteg magasságú, vagy a perem extrudálási " +"szélessége lesz használva (a számított értéket használja, ha nincs " +"beállítva)." msgid "Host" msgstr "Gazda" msgid "Host Type" -msgstr "Gazda Típus" +msgstr "Gazdatípus" msgid "Hostname" -msgstr "Hostnév" +msgstr "Gazdanév" msgid "Hostname, IP or URL" msgstr "Gazdanév, IP vagy URL" @@ -3473,33 +4855,91 @@ msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" -"További információért vigye a kurzort a gombok fölé, \n" +"További információkért vigye a kurzort a gombok fölé \n" "vagy kattintson erre a gombra." msgid "How far should the pad extend around the contained geometry" -msgstr "Milyen messzire terjedjen ki a párna az körbevett geometria körül" +msgstr "" +"Milyen messzire kell kiterjednie a padnak a tartalmazott geometria körül" msgid "How much should the tiny connectors penetrate into the model body." -msgstr "Az apró összekötőknek mennyire kell benyúlniuk a modell testébe." +msgstr "Az apró csatlakozóknak mennyire kell behatolniuk a modell testébe." msgid "How much the pinhead has to penetrate the model surface" -msgstr "Mennyire kell a tűhegynek benyúlnia a modell felületébe" +msgstr "Mennyire kell a tűhegynek behatolnia a modell felületébe" + +msgid "" +"How much the supports should lift up the supported object. If this value is " +"zero, the bottom of the model geometry will be considered as part of the pad." +"If \"Pad around object\" is enabled, this value is ignored." +msgstr "" +"Mennyivel emeljék fel a támasztékok a támogatott tárgyat. Ha ez az érték " +"nulla, akkor a modellgeometria alsó része a kitámasztás részének tekintendő." +"Ha a \"Pad around object\" (Támasztás az objektum körül) opció engedélyezve " +"van, ez az érték figyelmen kívül marad." msgid "How to apply limits" msgstr "Hogyan kell alkalmazni a korlátokat" +msgid "" +"How to apply the Machine Limits.\n" +"* In every case, they will be used as safeguards: Even if you use a print " +"profile that sets an acceleration of 5000, if in your machine limits the " +"acceleration is 4000, the outputted gcode will use the 4000 limit.\n" +"* You can also use it as a safeguard and to have a better printing time " +"estimate.\n" +"* You can also use it as a safeguard, to have a better printing time " +"estimate and emit the limits at the begining of the gcode file, with M201 " +"M202 M203 M204 and M205 commands. If you want only to write a sub-set, " +"choose the 'for time estimate' option and write your own gcodes in the " +"custom gcode section." +msgstr "" +"Hogyan kell alkalmazni a gépi korlátozást.\n" +"* Minden esetben biztosítékként kerülnek alkalmazásra: Még ha olyan " +"nyomtatási profilt használ is, amely 5000-es gyorsulást állít be, ha a gépi " +"korlátokban a gyorsulás 4000-es, a kiadott G-kód a 4000-es korlátot fogja " +"használni.\n" +"* Védelemként és a nyomtatási idő jobb megbecsülése érdekében is " +"használhatja.\n" +"* Ezt biztosítékként is használhatja, hogy a nyomtatási időt jobban " +"megbecsülje, és a G-kód fájl elején kiadja a korlátozásokat az M201 M202 " +"M203 M204 és M205 parancsokkal. Ha csak egy részhalmazt szeretne írni, " +"válassza az 'időbecsléshez' opciót, és írja meg saját G-kódját az egyéni G-" +"kód részbe." + +msgid "" +"How to compute the vertical z-distance.\n" +"From filament: it uses the nearest bit of the filament. When a bridge is " +"extruded, it goes below the current plane.\n" +"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is " +"extruded.\n" +"None: No z-offset. Useful for Soluble supports.\n" +msgstr "" +"A függőleges z-távolság kiszámítása.\n" +"A nyomtatószálból: a szál legközelebbi bitjét használja. Amikor egy híd " +"extrudálódik, az az aktuális sík alá kerül.\n" +"A síkból: a sík-Z-t használja. Ugyanaz, mint a 'nyomtatószálból', ha nincs " +"'híd' extrudálva.\n" +"Nincs: Nincs Z-eltolás. Hasznos az oldható támaszok esetében.\n" + +msgid "How to use the FreeCad python script window." +msgstr "A FreeCad python szkript ablak használata." + +msgid "How to use this menu and calibrations." +msgstr "A menü és a kalibrációk használata." + msgid "HTTP digest" -msgstr "HTTP azonosító" +msgstr "HTTP kivonat" msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" -"HTTP status: %1%\n" -"Message body: \"%2%\"" +"HTTP állapot: %1%\n" +"Üzenet teste: \"%2%\"" msgid "HTTPS CA File" -msgstr "HTTPS CA Fájl" +msgstr "HTTPS CA fájl" msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" @@ -3508,11 +4948,50 @@ msgstr "" "A HTTPS CA fájl opcionális. Csak akkor van rá szükség, ha a HTTPS-t saját " "aláírású tanúsítvánnyal használja." +msgid "Hyperbola" +msgstr "Hiperbola" + msgid "Icon size in a respect to the default size" -msgstr "Az ikonok mérete az alapértelmezett mérethez képest" +msgstr "Az ikon mérete az alapértelmezett mérethez képest" msgid "ID" -msgstr "Azonosító" +msgstr "ID" + +msgid "" +"Ideally, the spacing between two extrusions shouldn't be lower than the " +"nozzle diameter. Below are the extrusion widths for a spacing equal to the " +"nozzle diameter.\n" +msgstr "" +"Ideális esetben a két extrudálás közötti távolság nem lehet kisebb, mint a " +"fúvóka átmérője. Az alábbiakban a fúvóka átmérőjével megegyező távolságra " +"vonatkozó extrudálási szélességeket találja.\n" + +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width." +msgstr "" +"Ha egy felső felületet kell nyomtatni, és azt részben egy másik réteg " +"takarja, akkor nem lesz figyelembe véve egy olyan felső rétegnél, ahol a " +"szélessége ez alatt az érték alatt van. Ez hasznos lehet ahhoz, hogy az 'egy " +"kerület a tetején' ne váltson ki olyan felületen, amelyet csak kerületnek " +"kell fednie. Ez az érték lehet mm vagy a kerület extrudálási szélességének " +"%-a." + +msgid "" +"If activated, at the end of each layer, the printer will switch to a milling " +"head and mill the external perimeters.\n" +"You should set the 'Milling extra XY size' to a value high enough to have " +"enough plastic to mill. Also, be sure that your piece is firmly glued to the " +"bed." +msgstr "" +"Ha aktiválva van, a nyomtató minden egyes réteg végén átvált a marófejre, és " +"a külső peremvonalakat marja.\n" +"A 'Milling extra XY size' értéket elég magasra kell állítani ahhoz, hogy " +"elegendő műanyag legyen a maráshoz. Győződjön meg arról is, hogy a darabja " +"szilárdan az ágyhoz van ragasztva." msgid "" "If checked, supports will be generated automatically based on the overhang " @@ -3520,8 +4999,8 @@ msgid "" "\"Support Enforcer\" volumes only." msgstr "" "Ha be van jelölve, a támaszok automatikusan generálódnak a túlnyúlás " -"küszöbértéke alapján. Ha nincs bejelölve, a támaszok csak a \"Támaszték " -"Kényszerítők\" térfogatokon belül lesznek generálva." +"küszöbértéke alapján. Ha nincs bejelölve, a támaszok csak a \"Support " +"Enforcer\" köteteken belül lesznek generálva." msgid "" "If enabled, %s checks for new application versions online. When a new " @@ -3529,10 +5008,10 @@ msgid "" "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" -"Ha engedélyezve van, a %s online ellenőrzi az új alkalmazásverziókat. Amikor " -"új verzió válik elérhetővé, az alkalmazás következő indításakor értesítés " -"jelenik meg (program használata közben soha). Ez csak egy értesítési " -"mechanizmus, nem történik automatikus telepítés." +"Ha engedélyezve van, a %s ellenőrzi a frissítéseket. Ha egy új verzió " +"elérhetővé válik, az alkalmazás következő indításakor (soha nem a program " +"használata közben) megjelenik egy értesítés. Ez csak egy értesítési " +"mechanizmus, automatikus telepítés nem történik." msgid "" "If enabled, %s downloads updates of built-in system presets in the " @@ -3540,10 +5019,10 @@ msgid "" "When a new preset version becomes available it is offered at application " "startup." msgstr "" -"Ha engedélyezve van, a %s a háttérben letölti a beépített előbeállítások " +"Ha engedélyezve van, a %s a háttérben letölti a beépített elő-beállítások " "frissítéseit. Ezek a frissítések egy külön ideiglenes helyre kerülnek " -"letöltésre. Amikor egy új előbeállítások verzió elérhetővé válik, azt az " -"alkalmazás a következő indításkor felajánlja." +"letöltésre. Amikor egy új elő-beállítás verzió elérhetővé válik, az " +"alkalmazás indításakor felajánlja azt." msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" @@ -3555,14 +5034,14 @@ msgid "" "print bed at the start of the print." msgstr "" "Ha engedélyezve van, akkor a nyomtatás kezdetén az összes nyomtató extruder " -"előkészítésre kerül a tárgyasztal elülső szélénél." +"a nyomtatóágy elülső szélénél lesz alapozva." msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" -"Ha engedélyezve van, lehetővé teszi, hogy az Újratöltés lemezről parancs " -"automatikusan megkeresse és betöltse a fájlokat meghivatkozáskor." +"Ha engedélyezve van, lehetővé teszi, hogy a Reload from disk parancs " +"automatikusan megtalálja és betöltse a fájlokat." msgid "" "If enabled, allows the Reload from disk command to automatically find and " @@ -3570,10 +5049,10 @@ msgid "" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" -"Ha engedélyezve van, akkor az Újratöltés lemezről parancs automatikusan " -"megkeres1 és betölti a fájlokat meghívásakor.\n" -"Ha nincs engedélyezve, az Újratöltés lemezről parancs kérni fogja az egyes " -"fájlok kiválasztását a fájl megnyitása párbeszédpanelen." +"Ha engedélyezve van, lehetővé teszi, hogy az Újratöltés lemezről parancs " +"automatikusan megtalálja és betöltse a fájlokat.\n" +"Ha nincs engedélyezve, akkor a Reload from disk parancs minden egyes fájl " +"kiválasztását kéri a megnyitott fájl párbeszédpanel segítségével." msgid "" "If enabled, application will use the standard Windows system menu,\n" @@ -3590,10 +5069,10 @@ msgid "" "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" -"Ha engedélyezve van, a szekvenciális csúszkával végzett módosítások az " -"előnézetben csak a g-kód legfelső rétegére vonatkoznak. Ha letiltja, a " -"szekvenciális csúszkával végzett módosítások az előnézetben a teljes g-kódra " -"vonatkoznak." +"Ha engedélyezve vannak, a szekvenciális csúszkával végzett módosítások az " +"előnézetben csak a G-kód legfelső rétegére vonatkoznak. Ha letiltja, a " +"szekvenciális csúszkával végzett módosításokat az előnézetben, a teljes G-" +"kódra vonatkoznak." msgid "If enabled, PrusaSlicer will be open at the position it was closed" msgstr "" @@ -3615,7 +5094,22 @@ msgstr "" "rendereli." msgid "If enabled, reverses the direction of zoom with mouse wheel" -msgstr "Ha engedélyezve van, az egérgörgő zoom iránya megfordul" +msgstr "Ha engedélyezve van, megfordítja a zoom irányát az egérkerékkel" + +msgid "If enabled, sets %1% as default application to open .gcode files." +msgstr "" +"Ha engedélyezve van, beállítja a %1%-ot alapértelmezett alkalmazásként a ." +"gcode fájlok megnyitásához." + +msgid "If enabled, sets Slic3r as default application to open .3mf files." +msgstr "" +"Ha engedélyezve van, a Slic3r-t állítja be alapértelmezett alkalmazásként " +"a .3mf fájlok megnyitásához." + +msgid "If enabled, sets Slic3r as default application to open .stl files." +msgstr "" +"Ha engedélyezve van, beállítja a Slic3r-t alapértelmezett alkalmazásként az ." +"stl fájlok megnyitásához." msgid "" "If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " @@ -3630,10 +5124,10 @@ msgid "" "When a new preset version becomes available it is offered at application " "startup." msgstr "" -"Ha engedélyezve van, a Slic3er a háttérben letölti a beépített " -"Előbeállítások frissítéseit. Ezek a frissítések egy külön ideiglenes helyre " -"kerülnek letöltésre. Amikor egy új előbeállítások verzió elérhetővé válik, " -"azt az alkalmazás a következő indításkor felajánlja." +"Ha engedélyezve van, a Slic3r a háttérben tölti le a beépített rendszerbe " +"épített előbeállítások frissítéseit. Ezek a frissítések egy különálló " +"ideiglenes helyre kerülnek letöltésre. Amikor egy új előbeállítás verzió " +"elérhetővé válik, az alkalmazás indításakor felajánlja azt." msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " @@ -3655,15 +5149,31 @@ msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " "right corner of the 3D Scene" msgstr "" -"Ha engedélyezve van, az oldalsáv összecsukása gombja megjelenik a 3D jelenet " -"jobb felső sarkában" +"Ha engedélyezve van, a 3D jelenet jobb felső sarkában megjelenik az " +"összecsukható oldalsáv gombja" + +msgid "" +"If enabled, the command line arguments are sent to an existing instance of " +"GUI Slic3r, or an existing Slic3r window is activated. Overrides the " +"\"single_instance\" configuration value from application preferences." +msgstr "" +"Ha engedélyezve van, a parancssori argumentumokat a Slic3r GUI egy meglévő " +"példányának küldi el, vagy egy meglévő Slic3r ablakot aktivál. Felülírja a " +"\"single_instance\" konfigurációs értéket az alkalmazás beállításaiból." + +msgid "" +"If enabled, the gui will be in expert mode even if the simple or advanced " +"mode is selected (but not the setting tabs)." +msgstr "" +"Ha engedélyezve van, a gui szakértői módban lesz, még akkor is, ha az " +"egyszerű vagy a haladó mód van kiválasztva (de a beállítások lapjai nem)." msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" -"Ha engedélyezve van, a régi 3DConnexion eszközök beállításai párbeszédablak " -"elérhető a CTRL+M billentyűkombináció megnyomásával" +"Ha engedélyezve van, a régi 3DConnexion eszközök beállításai párbeszédpanel " +"a CTRL+M billentyűkombinációval érhető el" msgid "" "If enabled, the wipe tower will not be printed on layers with no " @@ -3671,10 +5181,10 @@ msgid "" "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"Ha engedélyezve van, akkor törlőtorony nem kerül kinyomtatásra " -"szerszámváltás nélküli rétegeken. A szerszámcserével rendelkező rétegeken az " -"extruder az aktuális magasság alá süllyed a törlőtorony nyomtatásához. A " -"felhasználó felelős azért, hogy ez ne okozzon ütközést a nyomtatás során." +"Ha engedélyezve van, a törlőtorony nem lesz nyomtatva a szerszámváltás " +"nélküli rétegekre. A szerszámcserével rendelkező rétegeken az extruder " +"lefelé halad a törlőtorony nyomtatásához. A felhasználó felelős azért, hogy " +"ne legyen ütközés a nyomtatással." msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." @@ -3684,14 +5194,14 @@ msgstr "" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" -"Ha engedélyezve van, szabad kamerát használ. Ha nincs engedélyezve, akkor " -"kötött kamerát használ." +"Ha engedélyezve van, használja a szabad kamerát. Ha nincs engedélyezve, " +"akkor korlátozott kamerát használ." msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" -"A program perspektivikus kamerát használ, ha engedélyezve van. Ha nincs " -"engedélyezve, akkor ortografikusat." +"Ha engedélyezve van, használja a perspektivikus kamerát. Ha nincs " +"engedélyezve, ortográfiai kamerát használ." msgid "If enabled, useful hints are displayed at startup." msgstr "Ha engedélyezve van, hasznos tippek jelennek meg indításkor." @@ -3710,28 +5220,126 @@ msgstr "" msgid "If enabled, you can change size of toolbar icons manually." msgstr "" -"Ha engedélyezve van, manuálisan módosíthatja az eszköztár ikonjainak méretét." +"Ha engedélyezve van, az eszköztár ikonjainak méretét manuálisan módosíthatja." + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum for all infill print moves of the first layer.\n" +"If expressed as a percentage it will scale the current infill speed.\n" +"Set it at 100% to remove any infill first layer speed modification.\n" +"Set zero to disable (using first_layer_speed instead)." +msgstr "" +"Ha abszolút értékként van megadva mm/mp-ben, akkor ez a sebesség az első " +"réteg összes kitöltési nyomtatási mozgására maximális értékként kerül " +"alkalmazásra.\n" +"Ha százalékos értékként van megadva, akkor az aktuális kitöltési sebességet " +"skálázza.\n" +"Ha 100%-ra állítja be, akkor az első réteg kitöltési sebességének módosítása " +"megszűnik.\n" +"Ha nullára állítja, akkor letiltja (helyette a first_layer_speed-et " +"használja)." + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum to all the print moves (but infill) of the first layer.\n" +"If expressed as a percentage it will scale the current speed.\n" +"Set it at 100% to remove any first layer speed modification (but for infill)." +msgstr "" +"Ha abszolút értékként van megadva mm/mp-ben, akkor ez a sebesség az első " +"réteg minden nyomtatási műveletére (kivéve a kitöltést) maximálisan " +"érvényes.\n" +"Ha százalékban van megadva, akkor az aktuális sebességet skálázza.\n" +"Ha 100%-ra állítja be, akkor az első réteg sebességének módosítása megszűnik " +"(kivéve a kitöltésnél)." + +msgid "" +"If it point to a valid freecad instance (the bin directory or the python " +"executable), you can use the built-in python script to quickly generate " +"geometry." +msgstr "" +"Ha ez egy érvényes freecad példányra mutat (a bin könyvtárra vagy a python " +"futtatható állományra), akkor a beépített python szkript segítségével " +"gyorsan generálhat geometriát." + +msgid "" +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the default and " +"maximum speeds.\n" +"Set zero to disable." +msgstr "" +"Ha a rétegnyomtatási idő becsült értéke ez alatt a másodpercszám alatt van, " +"a ventilátor bekapcsol, és a sebességét az alapértelmezett és a maximális " +"sebesség interpolálásával számítja ki.\n" +"A kikapcsoláshoz állítsa be a nullát." + +msgid "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value, if possible.\n" +"Set zero to disable." +msgstr "" +"Ha a rétegnyomtatási idő becsült értéke ez alatt a másodpercszám alatt van, " +"a nyomtatási mozgások sebessége csökken, hogy a nyomtatási időt lehetőség " +"szerint erre az értékre növelje.\n" +"Letiltáshoz állítsa be a nullát." + +msgid "" +"If the perimeter overlap is set at 100%, the yellow areas should be filled " +"by the overlap.\n" +"If overlap is at 0%, width = spacing." +msgstr "" +"Ha a kerület átfedése 100%-ra van állítva, a sárga területeket az átfedésnek " +"kell kitöltenie.\n" +"Ha az átfedés 0%, akkor a szélesség = távolság." + +msgid "" +"If this is enabled, fan will continuously run at base speed if no other " +"setting overrides that speed. Useful for PLA, harmful for ABS." +msgstr "" +"Ha ez engedélyezve van, a ventilátor folyamatosan az alapsebességen fog " +"működni, ha nincs más beállítás, amely felülírja ezt a sebességet. Hasznos " +"PLA esetén, káros ABS esetén." msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" -"Ha ez engedélyezve van, a Slic3r automatikusan középre igazítja az " -"objektumokat a tárgyasztal közepe körül." +"Ha ez be van kapcsolva, a Slic3r automatikusan a nyomtatóágy közepe köré " +"centrálja az objektumokat." msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" -"Ha ez engedélyezve van, a Slic3r a betöltés után azonnal előfeldolgozza az " -"objektumokat, hogy időt takarítson meg a G-kód exportálásakor." +"Ha ez engedélyezve van, a Slic3r előfeldolgozza az objektumokat, amint " +"betöltődnek, hogy időt takarítson meg a G-kód exportálásakor." + +msgid "" +"If this is enabled, Slic3r will prompt for when overwriting files from save " +"dialogs." +msgstr "" +"Ha ez engedélyezve van, a Slic3r rákérdez, amikor felülírja a fájlokat a " +"mentési párbeszédpanelekből." msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" -"Ha ez engedélyezve van, a Slic3r megjegyzi az utolsó kimeneti mappát, és azt " -"használja a bemeneti fájlokat tartalmazó mappa helyett." +"Ha ez be van kapcsolva, a Slic3r az utolsó kimeneti könyvtárat fogja kérni a " +"bemeneti fájlokat tartalmazó könyvtár helyett." + +msgid "" +"If this is enabled, when starting Slic3r and another instance of the same " +"Slic3r is already running, that instance will be reactivated instead." +msgstr "" +"Ha ez engedélyezve van, akkor a Slic3r indításakor, ha ugyanannak a Slic3r-" +"nek egy másik példánya már fut, akkor az a példány fog újraindulni helyette." + +msgid "" +"If you have some problem with the 'Only one perimeter on Top surfaces' " +"option, you can try to activate this on the problematic layer." +msgstr "" +"Ha problémája van a „Csak egy kerület a felső felületeken” opcióval, akkor " +"megpróbálhatja aktiválni a problémás rétegen." msgid "" "If you set this to a positive value, Z is quickly raised every time a " @@ -3739,7 +5347,7 @@ msgid "" "the first extruder will be considered." msgstr "" "Ha ezt pozitív értékre állítja, a Z minden alkalommal gyorsan megemelkedik, " -"a visszahúzás aktiválásakor. Több extruder használata esetén csak az első " +"amikor a visszahúzás elindul. Több extruder használata esetén csak az első " "extruder beállítása lesz figyelembe véve." msgid "" @@ -3748,7 +5356,8 @@ msgid "" "first layers." msgstr "" "Ha ezt pozitív értékre állítja, a Z emelés csak a megadott abszolút Z felett " -"történik. Ezzel a beállítással ez emeléseket első rétegeknél kihagyhatja." +"történik. Ezt a beállítást az első rétegek emelésének kihagyásához " +"hangolhatja." msgid "" "If you set this to a positive value, Z lift will only take place below the " @@ -3756,7 +5365,8 @@ msgid "" "first layers." msgstr "" "Ha ezt pozitív értékre állítja, a Z emelés csak a megadott abszolút Z alatt " -"történik. Ezzel a beállítással az emeléseket az első rétegekre korlátozhatja." +"történik. Ezt a beállítást úgy hangolhatja, hogy az emelést az első " +"rétegekre korlátozza." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -3765,11 +5375,11 @@ msgid "" "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" -"Ha a kimeneti G-kódot egyéni szkriptekkel akarja feldolgozni, akkor itt adja " -"meg az abszolút elérési útvonalakat. Több szkriptet pontosvesszővel " -"választhat el egymástól. A szkriptek első argumentumként a G-kód fájl " -"abszolút elérési útvonalát kapják meg, és a környezeti változók olvasásával " -"hozzáférhetnek a Slic3r konfigurációs beállításaihoz." +"Ha a kimeneti G-kódot egyéni szkripteken keresztül akarja feldolgozni, csak " +"adja meg itt az abszolút elérési útvonalakat. Több szkriptet pontosvesszővel " +"válasszon el. A szkriptek első argumentumként a G-kód fájl abszolút elérési " +"útvonalát kapják meg, és a környezeti változók olvasásával hozzáférhetnek a " +"Slic3r konfigurációs beállításaihoz." msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" @@ -3777,17 +5387,37 @@ msgid "" "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" -"Ha az ön firmware nem kezeli az extruderek egymáshoz viszonyított helyzetét, " -"akkor a G-kódnak kell ezt figyelembe vennie. Ezzel az opcióval megadhatja az " -"egyes extruderek előzőhöz viszonyított helyzetét. Pozitív koordinátákat vár " -"(ezek le lesznek vonva az XY koordinátából)." +"Ha a firmware nem kezeli az extruder elmozdulását, szüksége van a G-kódra, " +"hogy figyelembe vegye. Ezzel az opcióval megadhatja az egyes extruderek " +"elmozdulását az elsőhöz képest. Pozitív koordinátákat vár (ezeket kivonják " +"az XY koordinátából)." msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" "Ha a firmware relatív E értékeket igényel, jelölje be ezt a lehetőséget, " -"egyébként hagyja üresen. A legtöbb firmware abszolút értékeket használ." +"egyébként hagyja bejelölve. A legtöbb firmware abszolút értékeket használ." + +msgid "" +"If your firmware stops while printing, it may have its gcode queue full. Set " +"this parameter to merge extrusions into bigger ones to reduce the number of " +"gcode commands the printer has to process each second.\n" +"On 8bit controlers, a value of 150 is typical.\n" +"Note that reducing your printing speed (at least for the external " +"extrusions) will reduce the number of time this will triggger and so " +"increase quality.\n" +"Set zero to disable." +msgstr "" +"Ha a firmware megáll nyomtatás közben, akkor lehet, hogy a G-kód várólistája " +"megtelt. Állítsa be ezt a paramétert, hogy nagyobb extrudálásokat " +"egyesítsen, hogy csökkentse a nyomtatónak másodpercenként feldolgozandó G-" +"kód parancsok számát.\n" +"A 8 bites vezérlőknél a 150-es érték a jellemző.\n" +"Vegye figyelembe, hogy a nyomtatási sebesség csökkentése (legalábbis a külső " +"extrudálások esetében) csökkenti a kiváltások számát, és így növeli a " +"minőséget.\n" +"Adjon meg nulla értéket a letiltáshoz." msgid "Ignore HTTPS certificate revocation checks" msgstr "Visszavont HTTPS tanúsítvány ellenőrzésének figyelmen kívül hagyása" @@ -3805,8 +5435,13 @@ msgid "Ignore non-existent config files" msgstr "Nem létező konfigurációs fájlok figyelmen kívül hagyása" msgid "Ignores facets facing away from the camera." -msgstr "" -"Figyelmen kívül hagyja a kamerával ellentétes irányba néző felületeket." +msgstr "Figyelmen kívül hagyja a kamerától elfordított oldalakat." + +msgid "Illegal characters" +msgstr "Illegális karakterek" + +msgid "Illegal characters for filename" +msgstr "Illegális karakterek a fájlnévben" msgid "Illegal instruction" msgstr "Illegális utasítás" @@ -3815,19 +5450,19 @@ msgid "Import" msgstr "Importálás_" msgid "Import &Config" -msgstr "Konfiguráció Importálása" +msgstr "Importálás &Konfig" msgid "Import Config &Bundle" -msgstr "Konfigurációs Csomag Importálása" +msgstr "Konfigurációs csomag &importálása" msgid "Import Config from &Project" msgstr "Konfiguráció Importálása Projektből" msgid "Import Config from ini/amf/3mf/gcode" -msgstr "Konfiguráció importálása ini/amf/3mf/gcode fájlból" +msgstr "Konfiguráció importálása ini/amf/3mf/gcode-ból" msgid "Import config only" -msgstr "Csak a konfiguráció importálása" +msgstr "Csak konfiguráció importálása" msgid "Import file" msgstr "Fájl importálása" @@ -3839,13 +5474,13 @@ msgid "Import model and profile" msgstr "Modell és profil importálása" msgid "Import model only" -msgstr "Csak modell importálása" +msgstr "Csak importált modell" msgid "Import Object" -msgstr "Objektum Importálása" +msgstr "Objektum importálása" msgid "Import Objects" -msgstr "Objektumok Importálása" +msgstr "Objektumok importálása" msgid "Import of the repaired 3mf file failed" msgstr "A javított 3mf fájl importálása nem sikerült" @@ -3853,6 +5488,12 @@ msgstr "A javított 3mf fájl importálása nem sikerült" msgid "Import profile only" msgstr "Csak profil importálása" +msgid "Import Prusa Config" +msgstr "Prusa konfiguráció importálása" + +msgid "Import Prusa Config Bundle" +msgstr "Prusa Config csomag importálása" + msgid "Import SL1 / SL1S Archive" msgstr "SL1 / SL1S Archív Importálása" @@ -3863,10 +5504,13 @@ msgid "Import STL (Imperial Units)" msgstr "STL (Angolszász mértékegységek) Importálása" msgid "Import STL/OBJ/AM&F/3MF" -msgstr "STL/OBJ/AM&F/3MF Importálása" +msgstr "STL/OBJ/AM&F/3MF importálása" + +msgid "Import STL/OBJ/AMF/3MF without config, keep platter" +msgstr "STL/OBJ/AMF/3MF importálása konfiguráció nélkül, ágy megtartása" msgid "Importing canceled." -msgstr "Importálás megszakítva." +msgstr "Importálás törölve." msgid "Importing done." msgstr "Importálás kész." @@ -3875,28 +5519,62 @@ msgid "Importing SLA archive" msgstr "SLA archívum importálása" msgid "in" -msgstr "in" +msgstr "be" + +msgid "" +"In sloping areas, when you have a number of top / bottom solid layers and " +"few perimeters, it may be necessary to put some solid infill above/below " +"the perimeters to fulfill the top/bottom layers criteria.\n" +"By setting this to something higher than 0, you can control this behaviour, " +"which might be desirable if \n" +"undesirable solid infill is being generated on slopes.\n" +"The number set here indicates the number of layers between the inside of the " +"part and the air at and beyond which solid infill should no longer be added " +"above/below. If this setting is equal or higher than the top/bottom solid " +"layer count, it won't do anything. If this setting is set to 1, it will " +"evict all solid fill above/below perimeters. \n" +"Set zero to disable.\n" +"!! ensure_vertical_shell_thickness needs to be activated so this algorithm " +"can work !!." +msgstr "" +"Lejtős területeken, amikor számos felső/alsó tömör réteggel és kevés " +"peremmel rendelkezik, szükség lehet arra, hogy a peremek fölé/alá tömör " +"kitöltést helyezzen el, hogy teljesítse a felső/alsó rétegek kritériumait.\n" +"A 0-nál nagyobb értékre állítva ezt a viselkedést szabályozhatja, ami " +"kívánatos lehet, ha nemkívánatos tömör kitöltés keletkezik a lejtőkön.\n" +"Az itt beállított szám jelzi, hogy hány réteg van az alkatrész belseje és a " +"levegő között, amelynél és azon túl a szilárd kitöltés már nem adható hozzá " +"felül/alul. Ha ez a beállítás egyenlő vagy nagyobb, mint a felső/alsó " +"szilárd rétegszám, akkor nem csinál semmit. Ha ez a beállítás 1-re van " +"állítva, akkor minden szilárd kitöltést kiűz a peremterületek felett/" +"alatt. \n" +"Ha nullát állít be, akkor letiltja.\n" +"!! ensure_vertical_shell_thickness aktiválva kell lennie, hogy ez az " +"algoritmus működhessen !!." msgid "In the custom G-code were found reserved keywords:" msgstr "Az egyéni G-kódban foglalt kulcsszavak találhatók:" msgid "In this mode you can select only other %s Items%s" -msgstr "Ebben az módban csak másik %s elemeket lehet kiválasztani %s" +msgstr "Ebben az üzemmódban csak egyéb %s tételeket%s választhat ki" + +msgid "In vase mode (no seam)" +msgstr "Váza módban (nincs varrás)" msgid "Inches" -msgstr "Angolszász" +msgstr "Hüvelyk" msgid "Incompatible bundles:" msgstr "Nem kompatibilis csomagok:" msgid "Incompatible presets" -msgstr "Nem kompatibilis előbeállítások" +msgstr "Inkompatibilis előbeállítások" msgid "Incompatible with this %s" -msgstr "Nem kompatibilis ezzel %s" +msgstr "Nem kompatibilis ezzel a %s" msgid "Increase Instances" -msgstr "Példányszám Növelése" +msgstr "Instanciák növelése" msgid "Increase/decrease edit area" msgstr "Szerkesztési terület növelése/csökkentése" @@ -3909,7 +5587,7 @@ msgid "" msgstr "" "azt jelzi, hogy bizonyos beállítások módosultak, és nem egyenlők az aktuális " "opciócsoport rendszer- (vagy alapértelmezett) értékeivel.\n" -"Kattintson a NYITOTT LAKAT ikonra az aktuális opciócsoport összes " +"Kattintson a FELOLDOTT ZÁR ikonra az aktuális opciócsoport összes " "beállításának visszaállításához a rendszer (vagy az alapértelmezett) értékre." msgid "" @@ -3925,84 +5603,135 @@ msgid "" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" -"azt jelzi, hogy a beállítások megváltoztak, és nem egyenlők az aktuális " -"opciócsoport utoljára mentett előbeállításával.\n" -"Kattintson a VISSZA NYÍL ikonra az aktuális opciócsoport összes " -"beállításának visszaállításához az utoljára mentett állapotra." +"azt jelzi, hogy a beállítások megváltoztak, és nem egyeznek meg az aktuális " +"opciós csoport utolsó mentett előbeállításával.\n" +"Kattintson a VISSZA NYÍL ikonra az aktuális opciós csoport összes " +"beállításának visszaállításához az utolsó mentett előbeállításra." msgid "Infill" msgstr "Kitöltés" msgid "infill" -msgstr "kitöltés _ nyomtatásakor" +msgstr "kitöltés" + +msgid "Infill acceleration" +msgstr "Kitöltési gyorsulás" msgid "Infill before perimeters" -msgstr "Kitöltés a kerületek előtt" +msgstr "Kitöltés a peremek előtt" + +msgid "Infill bridges fan speed" +msgstr "Híd kitöltés hűtési sebessége" msgid "Infill extruder" -msgstr "Kitöltés extruder" +msgstr "Kitöltő extruder" + +msgid "Infill max first layer speed" +msgstr "Kitöltés max első réteg sebessége" + +msgid "Infill spacing" +msgstr "Kitöltési távolság" + +msgid "Infill width" +msgstr "Kitöltési szélesség" + +msgid "Infill/perimeters encroachment" +msgstr "Kitöltés/kerületek beavatkozás" + +msgid "Infilling layer %s / %s" +msgstr "Kitöltési réteg %s / %s" msgid "Infilling layers" msgstr "Kitöltő rétegek" msgid "Info" -msgstr "Info" +msgstr "Infó" msgid "Information" msgstr "Információ" msgid "Inherits profile" -msgstr "Örököli a profilt" +msgstr "Örökli a profilt" msgid "Initial exposition time is out of printer profile bounds." msgstr "A kezdeti expozíciós idő a nyomtató profiljának határain kívül esik." msgid "Initial exposure time" -msgstr "Kezdeti expozíciós idő" +msgstr "Kezdő expozíciós idő" msgid "Initial layer height" -msgstr "Első réteg magasság" +msgstr "Kezdeti rétegmagasság" + +msgid "Inner" +msgstr "Belső" msgid "Inner brim only" msgstr "Csak belső karima" +msgid "Inner XY size compensation" +msgstr "Belső XY méretkompenzáció" + msgid "Input value is out of range" -msgstr "A bemeneti érték kívül esik a tartományon" +msgstr "A bemeneti érték a tartományon kívül van" msgid "" "Input value is out of range\n" "Are you sure that %s is a correct value and that you want to continue?" msgstr "" -"A bemeneti érték kívül esik a tartományon\n" -"Biztos benne, hogy %s a helyes érték, és folytatni szeretné?" +"A bemeneti érték a tartományon kívül van\n" +"Biztos benne, hogy %s helyes érték, és folytatni szeretné a műveletet?" + +msgid "Insertion distance" +msgstr "Beillesztési távolság" msgid "Inspect / activate configuration snapshots" -msgstr "Konfigurációs pillanatfelvételek megtekintése / aktiválása" +msgstr "Konfigurációs pillanatképek megtekintése / aktiválása" msgid "Install" msgstr "Telepítés" msgid "Instance %d" -msgstr "Példány %d" +msgstr "Példák %d" msgid "Instance manipulation" -msgstr "Példány manipuláció" +msgstr "Példa manipuláció" msgid "Instances" -msgstr "Példányok" +msgstr "Példák" msgid "Instances to Separated Objects" -msgstr "Példányok külön objektumokká" +msgstr "Példányok elválasztott objektumokhoz" + +msgid "Interface" +msgstr "Felület" msgid "Interface loops" msgstr "Interfész hurkok" msgid "Interface pattern spacing" -msgstr "Interfész mintázat térköz" +msgstr "Felületi mintázat távolsága" msgid "Interface shells" msgstr "Interfész héjak" +msgid "Interior Brim width" +msgstr "Belső perem szélessége" + +msgid "Internal" +msgstr "Belső" + +msgid "Internal bridge infill" +msgstr "Belső híd kitöltés" + +msgid "Internal bridge speed" +msgstr "Belső híd sebessége" + +msgid "Internal bridges " +msgstr "Belső hidak " + +msgid "Internal bridges" +msgstr "Belső hidak" + msgid "internal error" msgstr "belső hiba" @@ -4012,6 +5741,31 @@ msgstr "Belső hiba: %1%" msgid "Internal infill" msgstr "Belső kitöltés" +msgid "Internal perimeter" +msgstr "Belső kerület" + +msgid "Internal perimeters speed" +msgstr "Belső kerületi sebesség" + +msgid "" +"Internal perimeters will go around sharp corners by turning around instead " +"of making the same sharp corner. This can help when there are visible holes " +"in sharp corners on perimeters. It also help to print the letters on the " +"benchy stern.\n" +"Can incur some more processing time, and corners are a bit less sharp." +msgstr "" +"A belső kerületek az éles sarkokat úgy kerülik meg, hogy megfordulnak, " +"ahelyett, hogy ugyanazt az éles sarkot csinálnák meg. Ez akkor segíthet, ha " +"a kerületeken éles sarkokban látható lyukak vannak. Ez is segít a betűk " +"nyomtatásában a padkás faron.\n" +"Valamivel több feldolgozási idővel járhat, és a sarkok kicsit kevésbé élesek." + +msgid "Internal resolution" +msgstr "Belső felbontás" + +msgid "Introduction" +msgstr "Bevezetés" + msgid "Invalid data" msgstr "Érvénytelen adat" @@ -4022,17 +5776,17 @@ msgid "invalid filename" msgstr "érvénytelen fájlnév" msgid "Invalid Head penetration" -msgstr "Érvénytelen Fej benyúlás" +msgstr "Érvénytelen fej benyúlás" msgid "invalid header or archive is corrupted" -msgstr "érvénytelen fejléc vagy sérült archívum" +msgstr "érvénytelen fejléc vagy az archívum sérült" msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" -"Érvénytelen bemeneti formátum. A méretek vektora a következő formátumban " -"lenne érvényes: \"%1%\"" +"Érvénytelen bemeneti formátum. Várhatóan a következő formátumú " +"dimenzióvektor: \"%1%\"" msgid "Invalid numeric input." msgstr "Érvénytelen numerikus bevitel." @@ -4046,48 +5800,81 @@ msgstr "Érvénytelen tűfej átmérő" msgid "Ironing" msgstr "Vasalás" +msgid "Ironing angle" +msgstr "Vasalási szög" + +msgid "Ironing angle. if negative, it will use the fill angle." +msgstr "Vasalási szög. Ha negatív, akkor a kitöltési szöget fogja használni." + +msgid "Ironing flow distribution" +msgstr "Vasalási áramlás eloszlása" + +msgid "Ironing pattern calibration" +msgstr "Vasalási minta kalibrálása" + msgid "Ironing Type" msgstr "Vasalás típusa" +msgid "Ironing width" +msgstr "Vasalási szélesség" + msgid "is licensed under the" msgstr "engedélyezve van a következő szerint" msgid "Iso" -msgstr "Izometrikus" +msgstr "Iso" msgid "Iso View" -msgstr "Izometrikus nézet" +msgstr "Iso Nézet" msgid "It can't be deleted or modified." -msgstr "Ezt nem lehet törölni vagy módosítani." +msgstr "Nem lehet törölni vagy módosítani." msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"Előnyös lehet az extrudermotor áramának növelése a filamentcsere során, hogy " -"elérhetővé tegye a tömörítéshez szükséges magas előtolási sebességet és az " -"ellenállás leküzdését deformált hegyű filament betöltésekor." +"Előnyös lehet az extrudermotor áramának növelése a szálcsere-szekvencia " +"során, hogy lehetővé tegye a gyors tömörítő előtolási sebességet és az " +"ellenállás leküzdését a csúnya alakú végű szál betöltésekor." msgid "It's a last preset for this physical printer." msgstr "Ez az utolsó előbeállítás ehhez a fizikai nyomtatóhoz." msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" -"SLA technológiával nem lehetséges több részből álló objektum(ok) nyomtatása." +"Lehetetlen több részből álló objektum(ok) nyomtatása SLA technológiával." msgid "It's not possible to delete the last related preset for the printer." msgstr "Nem lehet törölni a nyomtató utolsó kapcsolódó előbeállítását." +msgid "" +"It's not possible to use a bigger value for the brim offset than the brim " +"width, as it won't extrude anything. Brim offset have to be lower than the " +"brim width." +msgstr "" +"Nem lehet a perem eltolásához a perem szélességénél nagyobb értéket " +"használni, mivel ez nem fog semmit sem extrudálni. A peremeltolásnak " +"kisebbnek kell lennie, mint a peremszélességnek." + msgid "Jerk limits" -msgstr "Rántás korlátok" +msgstr "Rántási korlátok" msgid "Jitter" -msgstr "Jitter" +msgstr "Remegés" + +msgid "" +"Join the perimeters to create only one continuous extrusion without any z-" +"hop. Long inside travel (from external to holes) are not extruded to give " +"some space to the infill." +msgstr "" +"Csatlakoztassa a kerületeket, hogy egyetlen folyamatos extrudálást hozzon " +"létre Z-hop nélkül. A hosszú belső út (a külsőtől a lyukakig) nincs " +"extrudálva, hogy némi teret adjon a kitöltésnek." msgid "Jump to height" -msgstr "Ugrás a magassághoz" +msgstr "Ugrás a magasságra" msgid "" "Jump to height %s\n" @@ -4109,37 +5896,43 @@ msgid "Jump to move" msgstr "Ugrás a mozgáshoz" msgid "Just switch to \"%1%\" preset" -msgstr "Csak váltson a(z) \"%1%\" előbeállításra" +msgstr "Csak váltson a \"%1%\" előbeállításra" msgid "Keep" msgstr "Megtartás" +msgid "Keep bridges and overhangs" +msgstr "Hidak és a túlnyúlások megtartása" + msgid "Keep fan always on" -msgstr "Tartsa mindig bekapcsolva a ventilátort" +msgstr "Tartsa a ventilátort mindig bekapcsolva" msgid "Keep lower part" -msgstr "Alsó rész megtartása" +msgstr "Tartsa az alsó részt" msgid "Keep min" -msgstr "Min. megtartása" +msgstr "Tartsa min" + +msgid "Keep only bridges" +msgstr "Csak hidakat tart meg" msgid "Keep the selected settings." msgstr "A kiválasztott beállítások megtartása." msgid "Keep upper part" -msgstr "Felső rész megtartása" +msgstr "Tartsa a felső részt" msgid "Keyboard shortcuts" msgstr "Gyorsbillentyűk" msgid "Keyboard Shortcuts" -msgstr "Gyorsbillentyűk" +msgstr "Billentyűparancsok" msgid "kg" msgstr "kg" msgid "Label objects" -msgstr "Objektumok címkézése" +msgstr "Címkeobjektumok" msgid "Landscape" msgstr "Tájkép" @@ -4157,7 +5950,10 @@ msgid "Layer" msgstr "Réteg" msgid "Layer height" -msgstr "Réteg magasság" +msgstr "Réteg magassága" + +msgid "Layer height can't be greater than %s" +msgstr "A réteg magassága nem lehet nagyobb, mint %s" msgid "" "Layer height is not valid.\n" @@ -4171,11 +5967,26 @@ msgstr "" msgid "Layer height limits" msgstr "Rétegmagasság korlátok" +msgid "Layer previe&w Tab" +msgstr "Réteg előnéze&t lap" + msgid "Layer range Settings to modify" -msgstr "Módosítható rétegtartomány beálltások" +msgstr "Rétegtartomány A módosítandó beállítások" + +msgid "Layer Time" +msgstr "Rétegidő" + +msgid "Layer time" +msgstr "Réteg idő" + +msgid "Layer Time (log)" +msgstr "Rétegidő (napló)" + +msgid "Layer time (log)" +msgstr "Réteg idő (log)" msgid "layers" -msgstr "réteg(nél)" +msgstr "rétegek" msgid "Layers" msgstr "Rétegek" @@ -4183,6 +5994,9 @@ msgstr "Rétegek" msgid "Layers and perimeters" msgstr "Rétegek és kerületek" +msgid "Layout with the tab bar" +msgstr "Elrendezés a tabulátorral" + msgid "Leave \"%1%\" enabled" msgstr "Hagyja engedélyezve a \"%1%\"-ot" @@ -4202,7 +6016,13 @@ msgid "Left Preset Value" msgstr "Bal Előbeállítás Értéke" msgid "Left View" -msgstr "Balnézet" +msgstr "Balról nézet" + +msgid "Legacy layout" +msgstr "Örökölt elrendezés" + +msgid "Legend" +msgstr "Magyarázat" msgid "Legend/Estimated printing time" msgstr "Magyarázat/becsült nyomtatási idő" @@ -4211,12 +6031,10 @@ msgid "Length" msgstr "Hossz" msgid "Length of the cooling tube to limit space for cooling moves inside it." -msgstr "" -"A hűtőcső hossza, ami limitálja a hűtéshez használható helyet annak a " -"belsejében." +msgstr "A hűtőcső hossza, hogy korlátozza a benne lévő hűtési mozgások helyét." msgid "Length of the infill anchor" -msgstr "A kitöltőhorgony hossza" +msgstr "A kitöltő horgony hossza" msgid "" "License agreements of all following programs (libraries) are part of " @@ -4225,6 +6043,9 @@ msgstr "" "A következő programok (könyvtárak) licencszerződései az alkalmazás " "licencszerződésének részét képezik" +msgid "Lift only on" +msgstr "Emelés csak" + msgid "" "Lift the object above the bed when it is partially below. Enabled by " "default, use --no-ensure-on-bed to disable." @@ -4239,12 +6060,89 @@ msgstr "Z emelés" msgid "Lightning" msgstr "Villám" +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Mint az Első réteg szélessége, de a térköz a két vonal közötti távolság " +"(mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása az " +"alapértelmezett rétegmagasság használatával történik." + +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Mint az Első réteg szélessége, de a távolság a két sor közötti távolság " +"(mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Spacing' vagy a 'Width' értéket állíthatod be; a másik értéket a perem " +"'Overlap' százalékos értékei és az alapértelmezett rétegmagasság alapján " +"számítja ki a rendszer." + +msgid "" +"Like Perimeter width but spacing is the distance between two perimeter lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Mint a kerületi szélesség, de a távolság a két kerületi vonal közötti " +"távolság (mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Távolság' vagy a 'Szélesség' beállítható; a másik értéket a peremvonal " +"'Átfedés' százalékos értéke és az alapértelmezett rétegmagasság alapján " +"számítja ki a rendszer." + +msgid "" +"Like Solid infill width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Mint a tömör kitöltés szélessége, de a távolságtartás a két vonal közötti " +"távolság (mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Távolság' vagy a 'Szélesség' értéket állíthatod be; a másik értéket a " +"rendszer kiszámítja, az alapértelmezett rétegmagasságot használva." + +msgid "" +"Like the External perimeters width, but this value is the distance between " +"the edge and the 'frontier' to the next perimeter.\n" +"Setting the spacing will deactivate the width setting, and vice versa.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Mint a külső kerületek szélessége, de ez az érték a széle és a következő " +"kerület „határa” közötti távolság.\n" +"A távolság beállítása deaktiválja a szélesség beállítását, és fordítva.\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása a " +"kerületi 'Átfedés' százalékos és az alapértelmezett rétegmagasság " +"felhasználásával történik." + +msgid "" +"Like Top solid infill width but spacing is the distance between two lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Mint a Top tömör kitöltés szélessége, de a távolság a két vonal közötti " +"távolság (mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Spacing' vagy a 'Width' értéket állíthatod be; a másik értéket a rendszer " +"kiszámítja, az alapértelmezett rétegmagasságot használva." + msgid "Limited" msgstr "Korlátozott" msgid "Line" msgstr "Vonal" +msgid "Linear" +msgstr "Lineáris" + +msgid "lines" +msgstr "vonalak" + msgid "Load" msgstr "Betöltés" @@ -4252,10 +6150,10 @@ msgid "Load a model" msgstr "Modell betöltése" msgid "Load an model saved with imperial units" -msgstr "Angolszász mértékegységekkel mentett modell importálása" +msgstr "Angol mértékegységekkel mentett modell betöltése" msgid "Load an SL1 / Sl1S archive" -msgstr "SL1 / Sl1S archív betöltése" +msgstr "SL1 / Sl1S archívum betöltése" msgid "" "Load and store settings at the given directory. This is useful for " @@ -4263,55 +6161,60 @@ msgid "" "storage." msgstr "" "A beállítások betöltése és tárolása a megadott könyvtárban. Ez hasznos a " -"különböző profilok karbantartásához vagy a hálózaton tárolt konfigurációk " -"beviteléhez." +"különböző profilok karbantartásához vagy a hálózati tárolóból származó " +"konfigurációk felvételéhez." msgid "Load config file" -msgstr "Konfigurációs fájl betöltése" +msgstr "Konfig fájl betöltése" msgid "Load Config from ini/amf/3mf/gcode and merge" -msgstr "" -"Konfiguráció betöltése ini/amf/3mf/gcode fájlból, és hozzáadás a meglévőhöz" +msgstr "Konfiguráció betöltése az ini/amf/3mf/gcode fájlból és összevonás" + +msgid "Load configuration file exported from PrusaSlicer" +msgstr "PrusaSlicerből exportált konfigurációs fájl betöltése" msgid "Load configuration from project file" -msgstr "Konfiguráció betöltése projekt fájlból" +msgstr "Konfiguráció betöltése a projektfájlból" msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" -"Konfiguráció betöltése a megadott fájlból. Többször is használható " -"beállítások több fájlból történő betöltéséhez." +"Konfiguráció betöltése a megadott fájlból. Többször is használható több " +"fájlból történő beállítások betöltéséhez." msgid "Load exported configuration file" -msgstr "Korábban exportált konfigurációs fájl betöltése" +msgstr "Exportált konfigurációs fájl betöltése" msgid "Load File" -msgstr "Fájl Betöltése" +msgstr "Fájl betöltése" msgid "Load Files" -msgstr "Fájlok Betöltése" +msgstr "Fájlok betöltése" msgid "Load Modifier" msgstr "Módosító Betöltése" msgid "Load Part" -msgstr "Alkatrész Betöltése" +msgstr "Alkatrész betöltése" msgid "Load presets from a bundle" -msgstr "Előbeállítások betöltése konfigurációs csomagból" +msgstr "Előbeállítások betöltése egy csomagból" + +msgid "Load presets from a PrusaSlicer bundle" +msgstr "Előbeállítások betöltése egy PrusaSlicer csomagból" msgid "Load Project" -msgstr "Projekt Betöltése" +msgstr "Projekt betöltése" msgid "Load shape from STL..." -msgstr "Alakzat betöltése STL-ből..." +msgstr "Alakzat betöltése STL-ből…" msgid "Load..." msgstr "Betöltés..." msgid "loaded" -msgstr "betöltve_" +msgstr "betöltött" msgid "Loading" msgstr "Betöltés" @@ -4338,7 +6241,7 @@ msgid "Loading of a mode view" msgstr "Mód nézet betöltése" msgid "Loading of current presets" -msgstr "Az aktuális előbeállítások betöltése" +msgstr "Aktuális előbeállítások betöltése" msgid "Loading repaired model" msgstr "Javított modell betöltése" @@ -4347,42 +6250,102 @@ msgid "Loading speed" msgstr "Betöltési sebesség" msgid "Loading speed at the start" -msgstr "Betöltési sebesség kezdéskor" +msgstr "Betöltési sebesség induláskor" msgid "Local coordinates" msgstr "Helyi koordináták" msgid "Lock supports under new islands" -msgstr "A támasztékok lezárása az új szigetek alatt" +msgstr "Az új szigetek alatti zárszerkezetek" msgid "LOCKED LOCK" -msgstr "ZÁRT LAKAT" +msgstr "LEZÁRT ZÁR" msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" -"ZÁRT LAKAT ikon azt jelzi, hogy a beállítások megegyeznek az aktuális " -"opciócsoport rendszer- (vagy alapértelmezett) értékeivel" +"LEZÁRT ZÁR ikon azt jelzi, hogy a beállítások megegyeznek a rendszer (vagy " +"alapértelmezett) értékeivel az aktuális opciós csoportra vonatkozóan" msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" -"ZÁRT LAKAT ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy " +"A LEZÁRT ZÁR ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy " "alapértelmezett) értékével." +msgid "Log time" +msgstr "Naplózási idő" + msgid "Logging level" msgstr "Naplózási szint" msgid "Loops (minimum)" msgstr "Hurkok (minimum)" +msgid "lowest Y" +msgstr "legkisebb Y" + +msgid "lowest Z" +msgstr "legkisebb Z" + msgid "Lowest Z height" msgstr "Legalacsonyabb Z magasság" +msgid "M117" +msgstr "M117" + +msgid "M73" +msgstr "M73" + +msgid "" +"M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute " +"intervals into the G-code to let the firmware show accurate remaining time. " +"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " +"firmware supports M73 Qxx Sxx for the silent mode.\n" +"M117: Send a command to display a message to the printer, this is 'Time " +"Left .h..m..s'." +msgstr "" +"M73: M73 P{nyomtatott százalék} R{maradó idő percben} 1 perces időközönként " +"a G-kódba, hogy a firmware pontosan mutassa a hátralévő időt. Jelenleg csak " +"a Prusa i3 MK3 firmware ismeri fel az M73-at. Az i3 MK3 firmware is " +"támogatja az M73 Qxx Sxx Sxx-t a csendes üzemmódban.\n" +"M117: Küldjön egy parancsot a nyomtatónak egy üzenet megjelenítésére, ez a " +"'Time Left .h..m..s'." + msgid "Machine limits" -msgstr "Gépi limitek" +msgstr "Gépi korlátok" + +msgid "Machine Limits" +msgstr "Gépi korlátok" + +msgid "Machine limits are disabled. They are not used for anything." +msgstr "A gépi korlátok ki vannak kapcsolva. Nem használják őket semmire." + +msgid "Machine limits are used as safegard when generating gcode" +msgstr "A G-kód generálásakor a gépi határokat biztonságként használják" + +msgid "" +"Machine limits will be emitted to G-code and used to estimate print time. " +"They are also used as safegard when generating gcode" +msgstr "" +"A gépi határértékek G-kódba kerülnek, és a nyomtatási idő becslésére " +"szolgálnak. A G-kód generálásakor is használják őket, mint biztonsági " +"biztosítékot" + +msgid "" +"Machine limits will NOT be emitted to G-code, however they will be used to " +"estimate print time, which may therefore not be accurate as the printer may " +"apply a different set of machine limits. They are also used as safegard when " +"generating gcode" +msgstr "" +"A gépi korlátok NEM kerülnek a G-kódba, azonban a nyomtatási idő becslésére " +"szolgálnak, ami ezért nem biztos, hogy pontos, mivel a nyomtató más gépi " +"korlátokat alkalmazhat. A G-kód generálásakor is biztonságot nyújtanak" + +msgid "Main GUI always in expert mode" +msgstr "Fő felhasználói felület mindig szakértői módban" msgid "" "Make sure the object is printable. This is usually caused by negligibly " @@ -4393,9 +6356,18 @@ msgstr "" "elhanyagolhatóan kis extrudálások vagy hibás modell okozza. Próbálja meg " "kijavítani a modellt, vagy változtassa meg az tárgyasztalon való tájolását." +msgid "Manual by Gary Hodgson. Inspired by the RepRap community." +msgstr "Gary Hodgson kézikönyve. A RepRap közösség ihlette." + msgid "Manual editing" msgstr "Kézi szerkesztés" +msgid "Marker" +msgstr "Jelölés" + +msgid "Masked CWS" +msgstr "Maszkolt CWS" + msgid "Masked SLA file exported to %1%" msgstr "Maszkolt SLA fájl exportálva az alábbi helyre: %1%" @@ -4403,7 +6375,7 @@ msgid "Match single line" msgstr "Egysoros egyeztetés" msgid "Mate&rial Settings Tab" -msgstr "Anyagbeállítások Lap" +msgstr "Anyag&beállítások lap" msgid "Material" msgstr "Anyag" @@ -4412,67 +6384,106 @@ msgid "Material printing profile" msgstr "Anyag nyomtatási profil" msgid "Material Settings" -msgstr "Alapanyag Beállítások" +msgstr "Anyagbeállítások" msgid "Material Settings Tab" -msgstr "Alapanyag Beállítások Fül" +msgstr "Anyagbeállítások lap" msgid "Max" msgstr "Max" +msgid "max %s version" +msgstr "max %s verzió" + +msgid "Max angle" +msgstr "Max szög" + +msgid "Max bridge density" +msgstr "Max híd sűrűség" + msgid "Max bridge length" -msgstr "Híd max. hossza" +msgstr "Max híd hossza" msgid "Max bridges on a pillar" msgstr "Max hidak egy pilléren" +msgid "Max fan speed" +msgstr "Max. ventilátor sebesség" + +msgid "Max infill" +msgstr "Max kitöltés" + +msgid "Max layer height" +msgstr "Max. rétegmagasság" + +msgid "Max layer height can't be greater than nozzle diameter" +msgstr "A maximális rétegmagasság nem lehet nagyobb, mint a fúvóka átmérője" + +msgid "Max length" +msgstr "Max. hossz" + +msgid "Max line overlap" +msgstr "Max vonalátfedés" + msgid "Max merge distance" -msgstr "Maximális összeolvadási távolság" +msgstr "Max. egyesítési távolság" msgid "Max pillar linking distance" -msgstr "Maximális oszlop áthidalási távolság" +msgstr "Max. pillérkapcsolási távolság" msgid "Max print height" msgstr "Max nyomtatási magasság" msgid "Max print speed" -msgstr "Max nyomtatási sebesség" +msgstr "Max. nyomtatási sebesség" + +msgid "Max small perimeters length" +msgstr "Max. kis kerületi hossz" + +msgid "Max speed" +msgstr "Max sebesség" + +msgid "Max speed on the wipe tower" +msgstr "Maximális sebesség a törlőtornyon" + +msgid "Max speed reduction" +msgstr "Max. sebességcsökkentés" msgid "Max volumetric slope negative" -msgstr "Maximális térfogati meredekség negatív" +msgstr "Max. térfogati meredekség negatív" msgid "Max volumetric slope positive" -msgstr "Maximális térfogati meredekség pozitív" +msgstr "Max. térfogati meredekség pozitív" msgid "Max volumetric speed" -msgstr "Max Térfogati sebesség" +msgstr "Maximális térfogati sebesség" msgid "Maximal bridging distance" msgstr "Maximális áthidalási távolság" msgid "Maximal distance between supports on sparse infill sections. " -msgstr "A támaszok közötti maximális távolság a ritkás kitöltésű részeken. " +msgstr "Maximális távolság a támaszok között a ritkás kitöltésű szakaszokon. " msgid "Maximum acceleration E" -msgstr "Maximum gyorsulás E" +msgstr "Maximális gyorsulás E" msgid "Maximum acceleration for travel moves" msgstr "Maximum gyorsulás utazási mozgásokhoz" msgid "Maximum acceleration of the E axis" -msgstr "Maximum gyorsulás az E tengelyen" +msgstr "Az E tengely maximális gyorsulása" msgid "Maximum acceleration of the X axis" -msgstr "Maximum gyorsulás az X tengelyen" +msgstr "Az X tengely maximális gyorsulása" msgid "Maximum acceleration of the Y axis" -msgstr "Maximum gyorsulás az Y tengelyen" +msgstr "Az Y tengely maximális gyorsulása" msgid "Maximum acceleration of the Z axis" -msgstr "Maximum gyorsulás az Z tengelyen" +msgstr "A Z tengely maximális gyorsulása" msgid "Maximum acceleration when extruding" -msgstr "Maximum gyorsulás extrudáláskor" +msgstr "Maximális gyorsulás extrudáláskor" msgid "" "Maximum acceleration when extruding (M204 P)\n" @@ -4485,22 +6496,67 @@ msgstr "" "A Marlin (régi) firmware ezt utazási gyorsulásként is használja (M204 T)." msgid "Maximum acceleration when retracting" -msgstr "Maximum gyorsulás visszahúzáskor" +msgstr "Maximális gyorsulás visszahúzáskor" msgid "Maximum acceleration when retracting (M204 R)" -msgstr "Maximum gyorsulás visszahúzáskor (M204 R)" +msgstr "Maximális gyorsulás visszahúzáskor (M204 R)" + +msgid "Maximum acceleration when travelling (M204 T)" +msgstr "Maximális gyorsulás utazás közben (M204 T)" msgid "Maximum acceleration X" -msgstr "Maximum gyorsulás X" +msgstr "Maximális gyorsulás X" msgid "Maximum acceleration Y" -msgstr "Maximum gyorsulás Y" +msgstr "Maximális gyorsulás Y" msgid "Maximum acceleration Z" -msgstr "Maximum gyorsulás Z" +msgstr "Maximális gyorsulás Z" msgid "Maximum accelerations" -msgstr "Maximum gyorsulások" +msgstr "Maximális gyorsulások" + +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~178, brim will be created on everything but straight sections." +msgstr "" +"Maximális szög, hogy egy peremfül megjelenhessen. \n" +"Ha 0-ra van állítva, nem jön létre perem. \n" +"Ha ~178-ra van állítva, a perem mindenhol létrejön, kivéve az egyenes " +"szakaszokon." + +msgid "" +"Maximum area for the hole where the hole_size_compensation will apply fully. " +"After that, it will decrease down to 0 for four times this area. Set to 0 to " +"let the hole_size_compensation apply fully for all detected holes" +msgstr "" +"A lyuk maximális területe, ahol a hole_size_compensation teljes mértékben " +"érvényesül. Ezután ennek a területnek a négyszeresére, 0-ra csökken. A 0 " +"értékre állítva a hole_size_compensation minden észlelt lyukra teljes " +"mértékben érvényesül" + +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" +"Egy pont maximális eltérése a kör becsült sugarától.\n" +"Mivel a hengereket gyakran különböző méretű háromszögekként exportálják, " +"előfordulhat, hogy a pontok nem a kör kerületén vannak. Ez a beállítás némi " +"mozgásteret biztosít a felismerés kiszélesítéséhez.\n" +"Többnyire mm-ben vagy a sugár %-ában." + +msgid "" +"Maximum density for bridge lines. If you want more space between line (or " +"less), you can modify it. A value of 50% will create two times less lines, " +"and a value of 200% will create two time more lines that overlap each other." +msgstr "" +"A hídvonalak maximális sűrűsége. Ha több (vagy kevesebb) sortávolságot " +"szeretne, módosíthatja. Az 50%-os érték kétszer kevesebb vonalat hoz létre, " +"a 200%-os érték pedig kétszer több egymást átfedő vonalat." msgid "" "Maximum deviation of exported G-code paths from their full resolution " @@ -4519,72 +6575,102 @@ msgstr "" "a G-kód egyszerűsítése minden egyes rétegen egymástól függetlenül történik, " "látható műtermékek keletkezhetnek." +msgid "" +"Maximum distance between two points to allow adding new ones. Allow to avoid " +"distorting long strait areas.\n" +"Set zero to disable." +msgstr "" +"Két pont közötti maximális távolság, amely lehetővé teszi új pontok " +"hozzáadását. A hosszú egyenes területek torzításának elkerülése érdekében.\n" +"Letiltáshoz állítsa nullára." + msgid "Maximum exposure time" -msgstr "Maximum expozíciós idő" +msgstr "Max. expozíciós idő" msgid "Maximum feedrate E" -msgstr "Maximum előtolási sebesség E" +msgstr "Maximális előtolás E" msgid "Maximum feedrate of the E axis" -msgstr "Maximum előtolási sebesség az E tengelyen" +msgstr "Az E tengely maximális előtolása" msgid "Maximum feedrate of the X axis" -msgstr "Maximum előtolási sebesség az X tengelyen" +msgstr "Az X tengely maximális előtolása" msgid "Maximum feedrate of the Y axis" -msgstr "Maximum előtolási sebesség az Y tengelyen" +msgstr "Az Y tengely maximális előtolása" msgid "Maximum feedrate of the Z axis" -msgstr "Maximum előtolási sebesség az Z tengelyen" +msgstr "A Z tengely maximális előtolása" msgid "Maximum feedrate X" -msgstr "Maximum előtolási sebesség X" +msgstr "Maximális előtolás X" msgid "Maximum feedrate Y" -msgstr "Maximum előtolási sebesség Y" +msgstr "Maximális előtolás Y" msgid "Maximum feedrate Z" -msgstr "Maximum előtolási sebesség Z" +msgstr "Maximális előtolás Z" msgid "Maximum feedrates" -msgstr "Maximum előtolások" +msgstr "Maximális adagolási sebességek" + +msgid "Maximum G1 per second" +msgstr "Maximum G1 másodpercenként" msgid "Maximum initial exposure time" -msgstr "Maximum kezdeti expozíciós idő" +msgstr "Max. kezdeti expozíciós idő" msgid "Maximum jerk E" -msgstr "Maximum rántás E" +msgstr "Maximális rántás E" msgid "Maximum jerk of the E axis" -msgstr "Maximum rántás az E tengelyen" +msgstr "Az E tengely maximális rántása" msgid "Maximum jerk of the X axis" -msgstr "Maximum rántás az X tengelyen" +msgstr "Az X tengely maximális rántása" msgid "Maximum jerk of the Y axis" -msgstr "Maximum rántás az Y tengelyen" +msgstr "Az Y tengely maximális rántása" msgid "Maximum jerk of the Z axis" -msgstr "Maximum rántás az Z tengelyen" +msgstr "A Z tengely maximális rántása" msgid "Maximum jerk X" -msgstr "Maximum rántás X" +msgstr "Maximális rántás X" msgid "Maximum jerk Y" -msgstr "Maximum rántás Y" +msgstr "Maximális rántás Y" msgid "Maximum jerk Z" -msgstr "Maximum rántás Z" +msgstr "Maximális rántás Z" msgid "Maximum length of the infill anchor" -msgstr "A kitöltőhorgony maximális hossza" +msgstr "A kitöltő horgony maximális hossza" msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" -"Az egy pilléren elhelyezhető hidak maximális száma. A hidak tartják a " -"támasztópont tűfejeit, és kis ágakként csatlakoznak a pillérekhez." +"Az egy pillérre helyezhető hidak maximális száma. A hidak tartják a " +"támaszpont tűfejeket, és kis ágakként csatlakoznak a pillérekhez." + +msgid "" +"Maximum speed allowed for this filament. Limits the maximum speed of a print " +"to the minimum of the print speed and the filament speed. Set zero for no " +"limit." +msgstr "" +"A maximális megengedett sebesség ennél az izzószálnál. A nyomtatás maximális " +"sebességét a nyomtatási sebesség és a szálsebesség minimumára korlátozza. A " +"korlátozás nélküli értéket nullára állítja." + +msgid "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set zero for no limit." +msgstr "" +"A maximális megengedett térfogatsebesség ennél az izzószálnál. A nyomtatás " +"maximális térfogatsebességét a nyomtatási és a szálak térfogatsebességének " +"minimumára korlátozza. A korlátozás nélküli érték nulla." msgid "Maximum width of a segmented region" msgstr "Szegmentált régió maximális szélessége" @@ -4594,19 +6680,30 @@ msgstr "" "A szegmentált régió maximális szélessége. A nulla kikapcsolja ezt a funkciót." msgid "Merge" -msgstr "Összevonás" +msgstr "Egyesítés" msgid "Merge all parts to the one single object" -msgstr "Az összes alkatrész összevonása egyetlen objektummá" +msgstr "Összevonja az összes részt egyetlen objektummá" msgid "Merged" -msgstr "Összevonva" +msgstr "Összevont" + +msgid "" +"Merging bridges or pillars into other pillars can increase the radius. Zero " +"means no increase, one means full increase." +msgstr "" +"A hidak vagy pillérek más pillérekbe való beolvasztása növelheti a sugarat. " +"A nulla azt jelenti, hogy nincs növekedés, az egy pedig teljes növekedést " +"jelent." msgid "Merging slices and calculating statistics" -msgstr "Szeletek összefűzése és statisztika kiszámítása" +msgstr "Szeletek összevonása és statisztikák kiszámítása" + +msgid "Merging with perimeters" +msgstr "Összeolvadás a kerületekkel" msgid "Mesh repair failed." -msgstr "Háló javítás nem sikerült." +msgstr "A hálójavítás nem sikerült." msgid "" "Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." @@ -4615,88 +6712,249 @@ msgstr "" "térfogatot)." msgid "Message for pause print on current layer (%1% mm)." -msgstr "Üzenet a nyomtatás szüneteltetésekor az aktuális rétegen (%1% mm)." +msgstr "Üzenet a nyomtatás szüneteltetéséhez az aktuális rétegen (%1% mm)." + +msgid "Method" +msgstr "Módszer" + +msgid "Mill" +msgstr "Mill" + +msgid "Milling cutter" +msgstr "Marógép" + +msgid "Milling cutters" +msgstr "Marók" + +msgid "Milling diameter" +msgstr "Marási átmérő" + +msgid "Milling extra XY size" +msgstr "Extra XY méretű marás" + +msgid "Milling only after" +msgstr "Marás csak azután" + +msgid "Milling post-processing" +msgstr "Marás utófeldolgozása" + +msgid "Milling Speed" +msgstr "Marási sebesség" + +msgid "milliseconds" +msgstr "ezredmásodperc" msgid "Min" msgstr "Min" +msgid "min %s version" +msgstr "min %s verzió" + +msgid "Min bridge density" +msgstr "Min. híd sűrűség" + +msgid "Min concave angle" +msgstr "Min. homorú szög" + +msgid "Min convex angle" +msgstr "Min. konvex szög" + +msgid "Min first layer speed" +msgstr "Min. első réteg sebessége" + +msgid "Min height for travel" +msgstr "Min. utazási magasság" + +msgid "Min layer height" +msgstr "Min. rétegmagasság" + +msgid "Min layer height can't be greater than Max layer height" +msgstr "" +"A minimális rétegmagasság nem lehet nagyobb, mint a maximális rétegmagasság" + +msgid "Min length" +msgstr "Min. hossz" + msgid "Min print speed" -msgstr "Min nyomtatási sebesség" +msgstr "Min. nyomtatási sebesség" + +msgid "Min small perimeters length" +msgstr "Min. kis kerületi hossz" + +msgid "Min surface" +msgstr "Min. felület" + +msgid "Min width" +msgstr "Min. szélesség" msgid "Minimal distance of the support points" -msgstr "A támasztási pontok minimális távolsága" +msgstr "A támaszpontok minimális távolsága" msgid "Minimal filament extrusion length" -msgstr "Minimálisan elhasznált Filament" +msgstr "Minimális szál extrudálási hossza" msgid "Minimal points distance" -msgstr "Pontok minimális távolsága" +msgstr "Minimális ponttávolság" msgid "Minimal purge on wipe tower" -msgstr "Minimális öblítés a törlőtornyon" +msgstr "Minimális öblítés a törlőtoronyon" msgid "Minimize application" msgstr "Alkalmazás minimalizálása" +msgid "" +"Minimum (concave) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimális (homorú) szög egy csúcsnál, hogy lehetővé tegye a simítást (görbét " +"próbál létrehozni a csúcs körül). 180: semmi sem lesz simítva, 0: minden " +"szöget simít." + +msgid "" +"Minimum (convex) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimális (konvex) szög egy csúcsnál, hogy lehetővé tegye a simítást (görbét " +"próbál létrehozni a csúcs körül). 180: semmi sem lesz simítva, 0: minden " +"szöget simít." + msgid "Minimum bottom shell thickness" msgstr "Minimális alsó héjvastagság" msgid "Minimum bottom shell thickness is %1% mm." msgstr "Az alsó héj minimális vastagsága %1% mm." +msgid "" +"Minimum density for bridge lines. If Lower than bridge_overlap, then the " +"overlap value can be lowered automatically down to this value. If the value " +"is higher, this parameter has no effect.\n" +"Default to 87.5% to allow a little void between the lines." +msgstr "" +"Minimális sűrűség a hídvonalakhoz. Ha kisebb, mint a bridge_overlap, akkor " +"az átfedés értéke automatikusan lecsökkenthető erre az értékre. Ha az érték " +"magasabb, akkor ennek a paraméternek nincs hatása.\n" +"Alapértelmezett értéke 87,5%, hogy a vonalak között legyen egy kis üresség." + +msgid "" +"Minimum detail resolution, used for internal structures (gapfill and some " +"infill patterns).\n" +"Don't put a too-small value (0.05mm is way too low for many printers), as it " +"may create too many very small segments that may be difficult to display and " +"print." +msgstr "" +"Minimális részletfelbontás, belső struktúrákhoz (hézagkitöltés és néhány " +"kitöltési minta).\n" +"Ne adjon túl kicsi értéket (0,05mm a legtöbb nyomtatónak túl alacsony), mert " +"túl sok nagyon kicsi szegmenst hozhat létre, melyeket nehéz megjeleníteni és " +"nyomtatni." + +msgid "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more details than printers can render. Set zero to disable any " +"simplification and use full resolution from input. \n" +"Note: Slic3r has an internal working resolution of 0.0001mm.\n" +"Infill & Thin areas are simplified up to 0.0125mm." +msgstr "" +"Minimális részletfelbontás, a bemeneti fájl egyszerűsítésére szolgál a " +"szeletelési feladat felgyorsítása és a memóriahasználat csökkentése miatt. A " +"nagy felbontású modellek gyakran több részletet tartalmaznak, mint amennyit " +"a nyomtatók renderelni tudnak. A nulla beállítással kikapcsolható minden " +"egyszerűsítés, és a bemenetről származó teljes felbontás használható. \n" +"Megjegyzés: A Slic3r belső felbontása 0,0001mm.\n" +"A kitöltés és a vékony területek 0,0125 mm-ig egyszerűsödnek." + msgid "Minimum exposure time" -msgstr "Minimális expozíciós idő" +msgstr "Min. expozíciós idő" + +msgid "Minimum extrusion length" +msgstr "Minimális extrudálási hossz" msgid "Minimum feedrate when extruding" -msgstr "Minimum előtolási sebesség extrudáláskor" +msgstr "Minimális előtolás extrudáláskor" msgid "Minimum feedrate when extruding (M205 S)" -msgstr "Minimum előtolási sebesség extrudáláskor (M205 S)" +msgstr "Minimális előtolás extrudáláskor (M205 S)" msgid "Minimum feedrates" -msgstr "Minimum előtolások" +msgstr "Minimális adagolási sebességek" msgid "Minimum initial exposure time" -msgstr "Minimális kezdeti expozíciós idő" +msgstr "Min. kezdeti expozíciós idő" msgid "Minimum shell thickness" msgstr "Minimum héjvastagság" +msgid "" +"Minimum speed when printing the first layer.\n" +"Set zero to disable." +msgstr "" +"Minimális sebesség az első réteg nyomtatásakor.\n" +"A letiltáshoz állítsa nullára." + msgid "Minimum thickness of a top / bottom shell" msgstr "A felső/alsó héj minimális vastagsága" msgid "Minimum top shell thickness" -msgstr "Minimális felső héj vastagság" +msgstr "Minimális felső héjvastagság" msgid "Minimum top shell thickness is %1% mm." msgstr "A felső héj minimális vastagsága %1% mm." +msgid "Minimum top width for infill" +msgstr "Minimális felső szélesség a kitöltéshez" + msgid "Minimum travel after retraction" -msgstr "Minimális út visszahúzás után" +msgstr "Minimális út behúzás után" msgid "Minimum travel feedrate" -msgstr "Minimum utazási előtolás" +msgstr "Minimális utazási előtolás" msgid "Minimum travel feedrate (M205 T)" -msgstr "Minimum utazási előtolás (M205 T)" +msgstr "Minimális utazási előtolás (M205 T)" msgid "Minimum wall thickness of a hollowed model." msgstr "Az üreges modell minimális falvastagsága." +msgid "minimum width" +msgstr "minimális szélesség" + +msgid "" +"Minimum width for the extrusion to be extruded (widths lower than the nozzle " +"diameter will be over-extruded at the nozzle diameter). If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter. The " +"default behavior of PrusaSlicer is with a 33% value. Put 100% to avoid any " +"sort of over-extrusion." +msgstr "" +"Az extrudálandó extrudátum minimális szélessége (a fúvóka átmérőjénél kisebb " +"szélességű extrudátumokat a fúvóka átmérőjénél túl extrudálják). Ha " +"százalékban van megadva (pl. 110%), akkor a fúvóka átmérője felett kell " +"számítani. A PrusaSlicer alapértelmezett viselkedése 33%-os értékkel " +"történik. Tegyen 100%-ot, hogy elkerüljön mindenféle túlnyúlást." + +msgid "" +"Minimum width of features to maintain when doing the first layer " +"compensation." +msgstr "" +"A jellemzők minimális szélessége, amelyet az első rétegkompenzáció során meg " +"kell tartani." + msgid "Mirror horizontally" -msgstr "Tükrözés vízszintesen" +msgstr "Vízszintes tükör" msgid "Mirror Object" -msgstr "Objektum Tükrözése" +msgstr "Tárgy tükrözése" msgid "Mirror vertically" -msgstr "Tükrözés függőlegesen" +msgstr "Függőleges tükör" msgid "Mismatched type of print host: %s" -msgstr "A nyomtató gazdagép típusa nem egyezik meg: %s" +msgstr "A nyomtatóállomás típusa nem egyezik meg: %s" msgid "Mixed" -msgstr "Vegyes" +msgstr "Kevert" msgid "ml" msgstr "ml" @@ -4711,16 +6969,28 @@ msgid "mm or %" msgstr "mm vagy %" msgid "mm or % (zero to disable)" -msgstr "mm vagy % (nulla esetén letiltva)" +msgstr "mm vagy % (nulla letiltja)" + +msgid "mm/%" +msgstr "mm/%" msgid "mm/s" -msgstr "mm/s" +msgstr "mm/mp" msgid "mm/s or %" -msgstr "mm/s vagy %" +msgstr "mm/mp vagy %" + +msgid "mm/sec" +msgstr "mm/mp" msgid "mm/s²" -msgstr "mm/s²" +msgstr "mm/mp²" + +msgid "mm/s² or %" +msgstr "mm/mp² vagy %" + +msgid "mm3" +msgstr "mm3" msgid "mm²" msgstr "mm²" @@ -4729,10 +6999,10 @@ msgid "mm³" msgstr "mm³" msgid "mm³/s" -msgstr "mm³/s" +msgstr "mm³/mp" msgid "mm³/s²" -msgstr "mm³/s²" +msgstr "mm³/mp²" msgid "Mode" msgstr "Mód" @@ -4744,10 +7014,13 @@ msgid "model" msgstr "modell" msgid "Model repair canceled" -msgstr "Modell javítás visszavonva" +msgstr "Modelljavítás törölve" msgid "Model repair finished" -msgstr "Modell javítás kész" +msgstr "Modelljavítás befejezve" + +msgid "Model rounding precision" +msgstr "A modell kerekítési pontossága" msgid "Modifications to the current profile will be saved." msgstr "Az aktuális profil módosításai mentésre kerülnek." @@ -4762,81 +7035,104 @@ msgid "Modifiers" msgstr "Módosítók" msgid "money/bottle" -msgstr "pénz/flakon" +msgstr "pénz/palack" msgid "money/kg" msgstr "pénz/kg" msgid "Monotonic" -msgstr "Monotonikus" +msgstr "Monoton" + +msgid "Monotonic (filled)" +msgstr "Monoton (töltött)" msgid "More" msgstr "Bővebben" msgid "Mouse wheel" -msgstr "Egér görgő" +msgstr "Egérgörgő" msgid "Mouse wheel:" -msgstr "Egér görgő:" +msgstr "Egérgörgő:" msgid "Move" msgstr "Mozgatás" msgid "Move active thumb Down" -msgstr "Aktív jelölő mozgatása Le" +msgstr "Aktív hüvelykujj lefelé mozgatása" msgid "Move active thumb Left" -msgstr "Az aktív jelölő balra mozgatása" +msgstr "Az aktív hüvelykujj balra mozgatása" msgid "Move active thumb Right" -msgstr "Az aktív jelölő jobbra mozgatása" +msgstr "Az aktív hüvelykujj jobbra mozgatása" msgid "Move active thumb Up" -msgstr "Aktív jelölő mozgatása Fel" +msgstr "Aktív hüvelykujj felfelé mozgatása" msgid "Move clipping plane" msgstr "Vágási sík mozgatása" msgid "Move drainage hole" -msgstr "Leeresztő furat mozgatása" +msgstr "Mozgassa a vízelvezető lyukat" msgid "Move Object" -msgstr "Objektum Mozgatása" +msgstr "Tárgy mozgatása" msgid "Move point" -msgstr "Pont mozgatása" +msgstr "Mozgáspont" msgid "Move selection 10 mm in negative X direction" -msgstr "Kijelölés mozgatása 10 mm-rel negatív X irányban" +msgstr "Mozgassa a kijelölést 10 mm-rel negatív X irányba" msgid "Move selection 10 mm in negative Y direction" -msgstr "Kijelölés mozgatása 10 mm-rel negatív Y irányban" +msgstr "Mozgassa a kijelölést 10 mm-rel negatív Y irányba" msgid "Move selection 10 mm in positive X direction" -msgstr "Kijelölés mozgatása 10 mm-rel pozitív X irányban" +msgstr "Mozgassa a kijelölést 10 mm-rel pozitív X irányba" msgid "Move selection 10 mm in positive Y direction" -msgstr "Kijelölés mozgatása 10 mm-rel pozitív Y irányban" +msgstr "Mozgassa a kijelölést 10 mm-rel pozitív Y irányba" msgid "Move support point" -msgstr "Támasztópont mozgatása" +msgstr "Támaszpont áthelyezése" + +msgid "" +"Move the fan start in the past by at least this delay (in seconds, you can " +"use decimals). It assumes infinite acceleration for this time estimation, " +"and will only take into account G1 and G0 moves.\n" +"It won't move fan comands from custom gcodes (they act as a sort of " +"'barrier').\n" +"It won't move fan comands into the start gcode if the 'only custom start " +"gcode' is activated.\n" +"Use 0 to deactivate." +msgstr "" +"A ventilátor indítását legalább ennyi késleltetéssel (másodpercben, " +"tizedesjegyeket is használhat) tolja a múltba. Ehhez az időbecsléshez " +"végtelen gyorsulást feltételez, és csak a G1 és G0 mozgásokat veszi " +"figyelembe.\n" +"Az egyéni G-kódokból származó ventilátorparancsokat nem mozgatja (ezek " +"egyfajta \"akadálynak\" hatnak).\n" +"Nem mozgatja a ventilátorparancsokat a start G-kódba, ha a 'csak egyéni " +"start G-kód' opció be van kapcsolva.\n" +"A kikapcsoláshoz állítsa 0-ra." msgid "Movement" msgstr "Mozgás" msgid "Movement in camera space" -msgstr "Mozgás a kameratérben" +msgstr "Mozgás a kamera térben" msgid "Movement step set to 1 mm" -msgstr "A mozgatási lépték 1 mm-re állítása" +msgstr "Mozgási lépés 1 mm-re állítva" msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" -"A többféle anyaggal dolgozó nyomtatóknak szerszámváltáskor szükségük lehet " -"az extruderek előkészítésére vagy tisztítására. A felesleges anyagot a " -"törlőtoronyba extrudálja." +"A több anyagból nyomtatóknak szerszámváltáskor szükségük lehet az extruderek " +"alapozására vagy tisztítására. Extrudálja a felesleges anyagot a " +"törlőtoronyba." msgid "Multi-part object detected" msgstr "Több részből álló objektum észlelve" @@ -4847,7 +7143,7 @@ msgstr "Többanyagú festés" msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" -"Több %s eszköz található. Kérjük, hogy a feltöltéshez egyszerre csak egyet " +"Több %s eszközt találtunk. Kérjük, az égetéshez egyszerre csak egyet " "csatlakoztasson." msgid "" @@ -4855,15 +7151,18 @@ msgid "" "Instead of considering them as multiple objects, should I consider\n" "these files to represent a single object having multiple parts?" msgstr "" -"Több objektumot töltött be egy több-anyagos nyomtatóhoz.\n" -"Több különálló objektum helyett, egyetlen, több részből álló objektumként " -"kell betölteni őket?" +"Több objektumot töltöttek be egy több anyagból készült nyomathoz.\n" +"Ahelyett, hogy több objektumnak tekinteném őket, tekintsem\n" +"ezeket a fájlokat egyetlen, több részből álló objektumnak?" + +msgid "Multiplier" +msgstr "Szorzótényező" msgid "Multiply copies by creating a grid." -msgstr "Másolatok sokszorozása rács létrehozásával." +msgstr "Sokszorozás egy rács létrehozásával." msgid "Multiply copies by this factor." -msgstr "Másolatok sokszorozása ezzel a tényezővel." +msgstr "Szorozza meg ezzel a tényezővel." msgid "N/A" msgstr "N/A" @@ -4872,26 +7171,35 @@ msgid "Name" msgstr "Név" msgid "Name of the printer" -msgstr "Nyomtató neve" +msgstr "A nyomtató neve" msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" -"A nyomtató változat neve. A nyomtató változatok például a fúvóka átmérője " -"alapján különböztethetők meg." +"A nyomtatóváltozat neve. A nyomtatóváltozatokat például a fúvóka átmérője " +"alapján lehet megkülönböztetni." msgid "Name of the printer vendor." -msgstr "A nyomtató szállítójának neve." +msgstr "A nyomtató gyártójának neve." msgid "Name of the profile, from which this profile inherits." -msgstr "A profilnak a neve, amelytől ez a profil örököl." +msgstr "A profil neve, amelyből a profil öröklődik." msgid "Names of presets related to the physical printer" msgstr "A fizikai nyomtatóhoz tartozó előbeállítások nevei" +msgid "Nb down:" +msgstr "Nb le:" + +msgid "Nb tests:" +msgstr "Nb vizsgálatok:" + +msgid "Nb up:" +msgstr "Nb fel:" + msgid "Nearest" -msgstr "Legközelebbi" +msgstr "Legközelebb" msgid "Negative Volume" msgstr "Negatív térfogat" @@ -4900,7 +7208,7 @@ msgid "Network lookup" msgstr "Hálózati keresés" msgid "New" -msgstr "Ú&j " +msgstr "Új" msgid "New prerelease version %1% is available." msgstr "Elérhető a(z) %1% új kiadás előtti verziója." @@ -4909,13 +7217,16 @@ msgid "New printer preset selected" msgstr "Új nyomtató előbeállítás kiválasztva" msgid "New Project" -msgstr "Új Projekt" +msgstr "Új projekt" + +msgid "New project, clear platter" +msgstr "Új projekt, tiszta ágy" msgid "New release version %1% is available." msgstr "Elérhető a(z) %1% új kiadott verziója." msgid "New Value" -msgstr "Új Érték" +msgstr "Új érték" msgid "New version of %s is available" msgstr "A %s új verziója elérhető" @@ -4924,10 +7235,10 @@ msgid "New version:" msgstr "Új verzió:" msgid "Next Redo action: %1%" -msgstr "Következő mégis művelet: %1%" +msgstr "Következő művelet: %1%" msgid "Next Undo action: %1%" -msgstr "Következő visszavonás művelet: %1%" +msgstr "Következő visszavonás: %1%" msgid "No brim" msgstr "Nincs karima" @@ -4946,30 +7257,41 @@ msgid "No extrusion" msgstr "Nincs extrudálás" msgid "No extrusions were generated for objects." -msgstr "Az objektumokhoz nem készültek extrudálások." +msgstr "Az objektumokhoz nem generáltak kitüremkedéseket." msgid "No pad can be generated for this model with the current configuration" msgstr "" -"A jelenlegi konfigurációval nem lehet párnát generálni ehhez a modellhez" +"A jelenlegi konfigurációval nem lehet padot generálni ehhez a modellhez" + +msgid "No perimeters on bridge areas" +msgstr "A hídterületeken nincs kerület" msgid "No previously sliced file." msgstr "Nincs korábban szeletelt fájl." msgid "NO RAMMING AT ALL" -msgstr "EGYÁLTALÁN NINCS TÖMÖRÍTÉS" +msgstr "EGYÁLTALÁN NEM ÜTKÖZIK" + +msgid "No solid infill over" +msgstr "Nincs tömör kitöltés" + +msgid "No solid infill over perimeters" +msgstr "Nincs tömör kitöltés a kerületeken" msgid "No sparse layers (EXPERIMENTAL)" msgstr "Nincsenek ritkás rétegek (Kísérleti)" msgid "No support points will be placed closer than this threshold." -msgstr "" -"Nem kerülnek támasztási pontok ennél a küszöbértéknél közelebb egymáshoz." +msgstr "Ennél a küszöbértéknél közelebb nem helyeznek alátámasztási pontokat." msgid "No updates available" -msgstr "Nincs elérheő frissítés" +msgstr "Nincsenek frissítések" msgid "None" -msgstr "Egyik sem" +msgstr "Nincs" + +msgid "None (soluble)" +msgstr "Nincs (oldható)" msgid "Normal" msgstr "Normál" @@ -4981,7 +7303,10 @@ msgid "normal mode" msgstr "normál mód" msgid "not a ZIP archive" -msgstr "nem ZIP arcívum" +msgstr "nem ZIP archívum" + +msgid "Not connected" +msgstr "Nincs csatlakoztatva" msgid "Not found:" msgstr "Nem található:" @@ -4989,6 +7314,11 @@ msgstr "Nem található:" msgid "Note" msgstr "Megjegyzés" +msgid "Note that only Multiple of 5 can be engraved in the part" +msgstr "" +"Vegye figyelembe, hogy az alkatrészbe csak az 5-ös többszörösét lehet " +"gravírozni" + msgid "Note, that the selected preset will be deleted from this printer too." msgid_plural "" "Note, that the selected preset will be deleted from these printers too." @@ -5013,6 +7343,27 @@ msgstr[1] "" msgid "NOTE:" msgstr "MEGJEGYZÉS:" +msgid "" +"Note: All parameters from this group are moved to the Physical Printer " +"settings (see changelog).\n" +"\n" +"A new Physical Printer profile is created by clicking on the \"cog\" icon " +"right of the Printer profiles combo box, by selecting the \"Add physical " +"printer\" item in the Printer combo box. The Physical Printer profile editor " +"opens also when clicking on the \"cog\" icon in the Printer settings tab. " +"The Physical Printer profiles are being stored into %s/physical_printer " +"directory." +msgstr "" +"Megjegyzés: Az összes paraméter ebből a csoportból átkerül a Fizikai " +"nyomtató beállításaiba (lásd a változásnaplót).\n" +"\n" +"Egy új fizikai nyomtató profil létrehozásához kattintson a nyomtatóprofilok " +"kombinált mezőtől jobbra található \"fogaskerék\" ikonra, a nyomtató " +"kombinált mezőben a \"Fizikai nyomtató hozzáadása\" elem kiválasztásával. A " +"Fizikai nyomtató profilszerkesztő akkor is megnyílik, ha a nyomtató " +"beállításai lapon a \"fogaskerék\" ikonra kattint. A fizikai nyomtató " +"profilok a %s/physical_printer könyvtárban kerülnek tárolásra." + msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "Megjegyzés: Az AstroBox legalább 1.1.0-s verziója szükséges." @@ -5027,20 +7378,20 @@ msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "Megjegyzés: Az OctoPrint legalább 1.1.0-s verziója szükséges." msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Megjegyzés: A Repetier legalább 0.90.0-s verziója szükséges." +msgstr "Megjegyzés: Repetier legalább 0.90.0 verzió szükséges." msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" -"Megjegyzés: egyes billentyűparancsok csak (nem)szerkesztési módban működnek." +"Megjegyzés: egyes parancsikonok csak (nem) szerkesztési módban működnek." msgid "Note: This preset will be replaced after saving" msgstr "Megjegyzés: Ez az előbeállítás a mentés után lecserélődik" msgid "Notes" -msgstr "Megjegyzések" +msgstr "Jegyzetek" msgid "Notice" -msgstr "Megjegyzés" +msgstr "Értesítés" msgid "Notify about new releases" msgstr "Értesítés az új kiadásokról" @@ -5049,28 +7400,31 @@ msgid "nozzle" msgstr "fúvóka" msgid "Nozzle and Bed Temperatures" -msgstr "A fúvóka és a tárgyasztal hőmérséklete" +msgstr "Fúvóka és ágyhőmérséklet" msgid "Nozzle diameter" -msgstr "Fúvóka Átmérő" +msgstr "Fúvóka átmérő" msgid "Nozzle Diameter:" -msgstr "Fúvóka Átmérője:" +msgstr "Fúvóka átmérője:" msgid "Nozzle temperature" -msgstr "Fúvóka hőmérséklet" +msgstr "Fúvóka hőmérséklete" + +msgid "Nozzle volume" +msgstr "Fúvóka térfogata" msgid "Number of cooling moves" -msgstr "Hűtési lépések száma" +msgstr "Hűtési mozgások száma" msgid "Number of extruders of the printer." -msgstr "A nyomtató Extrudereinek száma." +msgstr "A nyomtató extrudereinek száma." msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "" -"Az objektum(ok) és a támaszanyag közé beillesztendő interfész rétegek száma." +"Az objektum(ok) és a tartóanyag közé beillesztendő illesztő rétegek száma." msgid "" "Number of interface layers to insert between the object(s) and support " @@ -5079,14 +7433,33 @@ msgstr "" "Az objektum(ok) és a támaszanyag közé beillesztendő interfész rétegek száma. " "Állítsa -1-re a support_material_interface_layers használatához" -msgid "Number of pixels in" -msgstr "Pixelek száma" +msgid "" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"zero to disable skirt completely." +msgstr "" +"A szoknyahurkok száma. Ha a Minimális extrudálási hossz opció be van " +"állítva, a hurkok száma nagyobb lehet, mint az itt beállított. A szoknya " +"teljes kikapcsolásához állítsa be a nullát." -msgid "Number of pixels in X" -msgstr "Pixelek száma X irányban" +msgid "Number of milling heads." +msgstr "A marófejek száma." -msgid "Number of pixels in Y" -msgstr "Pixelek száma Y irányban" +msgid "" +"Number of mm the overhang need to be for the reversal to be considered " +"useful. Can be a % of the perimeter width." +msgstr "" +"A túlnyúlás millimétereinek száma ahhoz, hogy a visszafordítás hasznosnak " +"minősüljön. Lehet a kerületi szélesség %-ában." + +msgid "Number of pixels in" +msgstr "Képpontok száma" + +msgid "Number of pixels in X" +msgstr "X képpontok száma" + +msgid "Number of pixels in Y" +msgstr "Y képpontok száma" msgid "Number of solid layers to generate on bottom surfaces." msgstr "Az alsó felületeken létrehozandó szilárd rétegek száma." @@ -5101,12 +7474,15 @@ msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "" -"A szükséges rétegek száma a kezdeti expozíciós időről az expozíciós időre " -"való átmenethez" +"A kezdeti expozíciós időtől az expozíciós időig terjedő expozíciós időhöz " +"szükséges rétegek száma" msgid "Number of tool changes" msgstr "Szerszámcserék száma" +msgid "O&pen %s" +msgstr "M&egnyitás %s" + msgid "Object elevation" msgstr "Objektum magassága" @@ -5126,7 +7502,7 @@ msgid "Object reordered" msgstr "Objektum átrendezve" msgid "Object Settings to modify" -msgstr "Módosítható objektum beálltások" +msgstr "Módosítandó objektumbeállítások" msgid "" "Object size from file %s appears to be zero.\n" @@ -5141,18 +7517,21 @@ msgstr[1] "" "A fájlban lévő %s objektumuk mérete nullának tűnik.\n" "Ezek az objektumok eltávolításra kerültek a modellből" +msgid "Object sort" +msgstr "Objektum rendezés" + msgid "Object too large?" -msgstr "Az objektum túl nagy?" +msgstr "Túl nagy a tárgy?" msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" -"A szerszámcsere utáni tisztítás az objektum teljes egészén történik. Ez " -"csökkenti a hulladék mennyiségét, amely egyébként a törlőtoronyba kerülne, " -"emellett csökkenti a nyomtatási időt. Az objektumok színei emiatt keveredni " -"fognak." +"Az objektumot a fúvóka szerszámcsere utáni tisztítására használják, hogy " +"megtakarítsák az anyagot, amely egyébként a törlőtoronyba kerülne, és " +"csökkentsék a nyomtatási időt. Az objektumok színei ennek eredményeképpen " +"keverednek." msgid "object" msgid_plural "objects" @@ -5160,38 +7539,71 @@ msgstr[0] "objektum" msgstr[1] "objektumok" msgid "objects" -msgstr "objektumok" +msgstr "tárgyak" msgid "Objects List" msgstr "Objektumok Listája" msgid "Octagram Spiral" -msgstr "Octagram Spirál" +msgstr "Oktagram spirál" msgid "OctoPrint version" msgstr "OctoPrint verzió" msgid "of a current Object" -msgstr "egy aktuális objektum_" +msgstr "egy aktuális objektum" msgid "Offset" -msgstr "Offset" +msgstr "Eltolás" + +msgid "" +"Old layout: all windows are in the application, settings are on the top tab " +"bar and the platter choice in on the bottom of the platter view." +msgstr "" +"Régi elrendezés: az összes ablak az alkalmazásban van, a beállítások a felső " +"fülek sávján, a tányérválasztás pedig a tányérnézet alján." msgid "Old Value" -msgstr "Régi Érték" +msgstr "Régi érték" + +msgid "On odd layers" +msgstr "Páratlan rétegeken" msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"OSX rendszeren alapértelmezés szerint mindig csak egy példány fut az " -"alkalmazásból. Mindazonáltal az alkalmazás több példánya is futtatható a " -"parancssorból. Ebben az esetben ez a beállítás csak egy példányt engedélyez." +"Az OSX rendszerben alapértelmezés szerint mindig csak egy példány fut az " +"alkalmazásból. Azonban ugyanazon alkalmazás több példánya is futtatható a " +"parancssorból. Ilyen esetben ez a beállítás csak egy példányt engedélyez." + +msgid "On overhangs" +msgstr "Túlnyúlásokon" msgid "On overhangs only" msgstr "Csak túlnyúlásokon" +msgid "" +"On some OS like MacOS or some Linux, tooltips can't stay on for a long time. " +"This setting replaces native tooltips with custom dialogs to improve " +"readability (only for settings).\n" +"Note that for the number controls, you need to hover the arrows to get the " +"custom tooltip. Also, it keeps the focus but will give it back when it " +"closes. It won't show up if you are editing the field." +msgstr "" +"Néhány operációs rendszeren, mint például a MacOS vagy néhány Linux, az " +"eszköztippek nem maradnak sokáig bekapcsolva. Ez a beállítás a natív " +"eszköztippeket egyéni párbeszédpanelekkel helyettesíti az olvashatóság " +"javítása érdekében (csak a beállítások esetében).\n" +"Vegye figyelembe, hogy a számvezérlők esetében a nyilak fölé kell mozgatnia " +"a nyilakat, hogy megjelenjen az egyéni eszköztipp. Emellett megtartja a " +"fókuszt, de bezáráskor visszaadja azt. Nem jelenik meg, ha éppen szerkeszti " +"a mezőt." + +msgid "On surfaces" +msgstr "Felületeken" + msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." @@ -5200,10 +7612,10 @@ msgstr "" "tanúsítványtárolójából vagy kulcstárából." msgid "On/Off one layer mode of the vertical slider" -msgstr "A függőleges csúszka egyrétegű módjának Be/Kikapcsolása" +msgstr "Függőleges csúszka egy rétegű módjának be/ki kapcsolása" msgid "One layer mode" -msgstr "Egyrétegű mód" +msgstr "Egy réteg mód" msgid "One of the presets doesn't found" msgstr "Az egyik előbeállítás nem található" @@ -5211,42 +7623,83 @@ msgstr "Az egyik előbeállítás nem található" msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "" -"Egy vagy több objektumhoz olyan extruder lett hozzárendelve, amely nincs a " -"nyomtatóban." +"Egy vagy több objektumhoz olyan extrudert rendeltek, amely nem rendelkezik a " +"nyomtatóval." + +msgid "one test" +msgstr "egy teszt" msgid "Ongoing uploads" -msgstr "Folyamatban lévő feltöltések" +msgstr "Folyamatos feltöltések" msgid "" "Only a single object may be printed at a time in Spiral Vase mode. Either " "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" -"Spirálváza módban egyszerre csak egyetlen objektum nyomtatható. Vagy " -"távolítsa el az összes objektumot az utolsó kivételével, vagy engedélyezze a " +"Spirálváza módban egyszerre csak egyetlen tárgy nyomtatható. Vagy távolítsa " +"el az összes objektumot az utolsó kivételével, vagy engedélyezze a " "szekvenciális módot a „complete_objects” paraméterrel." msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" -"Csak akkor hozzon létre támaszt, ha az a tárgyasztalon nyugszik. Ne hozzon " -"létre támaszt a nyomtatáson." +"Csak akkor hozzon létre támasztékot, ha az egy építőlemezen fekszik. Ne " +"hozzon létre támasztékot a nyomtatáson." + +msgid "Only custom Start G-code" +msgstr "Csak egyéni Start G-kód" + +msgid "" +"Only do the vase trick on the external side. Useful when the thickness is " +"too low." +msgstr "" +"A váza trükköt csak a külső oldalon végezze. Hasznos, ha a vastagság túl " +"kicsi." + +msgid "" +"Only do the vase trick on the external side. Useful when you only want to " +"remove seam from screw hole." +msgstr "" +"A váza trükköt csak a külső oldalon végezze. Akkor hasznos, ha csak a " +"varrást szeretné eltávolítani a csavarlyukból." + +msgid "Only draw brim over the sharp edges of the model." +msgstr "Csak a modell éles szélei fölé húzza a karimát." + +msgid "Only for inner side" +msgstr "Csak a belső oldalra" + +msgid "Only for outer side" +msgstr "Csak a külső oldalon" + +msgid "Only if on platter" +msgstr "Csak ha tálcán" msgid "Only infill where needed" -msgstr "Kitöltés csak ott, ahol szükséges" +msgstr "Csak ott töltse ki, ahol szükséges" msgid "Only lift Z" msgstr "Csak a Z tengely emelése" msgid "Only lift Z above" -msgstr "Z emelés csak efelett" +msgstr "Csak a Z-t emelje feljebb" msgid "Only lift Z below" -msgstr "Z emelés csak ezalatt" +msgstr "Csak a Z-t emelje fel" + +msgid "Only one peri - other algo" +msgstr "Csak egy peri - másik algo" + +msgid "Only one perimeter on First layer" +msgstr "Csak egy kerület az első rétegen" + +msgid "Only one perimeter on Top surfaces" +msgstr "Csak egy kerület a felső felületeken" msgid "Only retract when crossing perimeters" -msgstr "Visszahúzás csak kerület kereszezésekor" +msgstr "Csak a kerületek átlépésekor húzza vissza" msgid "" "Only the following installed printers are compatible with the selected " @@ -5262,40 +7715,57 @@ msgstr "" "Csak az alábbi telepített nyomtatók kompatibilisek a kiválasztott SLA " "anyagokkal" +msgid "" +"Only used for Klipper, where you can name the extruder. If not set, will be " +"'extruderX' with 'X' replaced by the extruder number." +msgstr "" +"Csak a Klipper esetében használatos, ahol az extruder nevét adhatja meg. Ha " +"nincs beállítva, akkor 'extruderX' lesz, ahol az 'X' helyébe az extruder " +"száma lép." + +msgid "Only when GCode is ready" +msgstr "Csak ha a GCode készen áll" + msgid "Ooze prevention" msgstr "Szivárgás megelőzés" msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" -"A szivárgásmegelőzés jelenleg nem támogatott, ha a törlőtorony engedélyezve " -"van." +"A szivárgás elleni védelem jelenleg nem támogatott, ha a törlőtorony " +"engedélyezett." + +msgid "Open %s" +msgstr "Megnyitás: %s" msgid "Open a G-code file" msgstr "G-kód fájl megnyitása" +msgid "Open a new %s instance" +msgstr "Új %s példány megnyitása" + msgid "Open a project file" -msgstr "Projekt fájl megnyitása" +msgstr "Projektfájl megnyitása" msgid "Open as project" -msgstr "Megnyitás Projektként" +msgstr "Megnyitás projektként" msgid "Open CA certificate file" -msgstr "CA tanúsítvány fájl megnyitása" +msgstr "CA tanúsítványfájl megnyitása" msgid "Open changelog page" -msgstr "Változáslista megnyitása" +msgstr "Változásnapló oldal megnyitása" msgid "Open download page" msgstr "Letöltési oldal megnyitása" msgid "Open Folder." -msgstr "Mappa Megnyitása." +msgstr "Mappa megnyitása." msgid "Open G-code file:" msgstr "G-kód fájl megnyitása:" msgid "Open G-code viewer" -msgstr "G-kód nézegető megnyitása" +msgstr "Megnyitja a G-kód nézegetőt" msgid "Open hyperlink in default browser?" msgstr "Hiperhivatkozás megnyitása az alapértelmezett böngészőben?" @@ -5309,11 +7779,26 @@ msgstr "Új példány megnyitása" msgid "Open New Instance" msgstr "Új Példány Megnyitása" +msgid "Open project STL/OBJ/AMF/3MF with config, clear platter" +msgstr "STL/OBJ/AMF/3MF projekt megnyitása konfigurációval, tiszta ággyal" + +msgid "Open the %s releases page in your browser" +msgstr "Nyissa meg a %s kiadványok oldalát a böngészőben" + +msgid "Open the %s wiki in your browser" +msgstr "A %s wiki megnyitása a böngészőben" + msgid "Open the dialog to modify shape gallery" msgstr "Dialógusablak megnyitása az Alakzat Galéria szerkesztéséhez" +msgid "Open the Slic3r Manual in your browser" +msgstr "A Slic3r kézikönyv megnyitása a böngészőben" + +msgid "Open the Slic3r website in your browser" +msgstr "Nyissa meg a Slic3r weboldalát a böngészőben" + msgid "Opening Configuration Wizard" -msgstr "Konfigurációs Varázsló Megnyitása" +msgstr "Konfigurációs varázsló megnyitása" msgid "Opening new project while some presets are unsaved." msgstr "Új projekt megnyitása, miközben néhány előbeállítás nincs elmentve." @@ -5345,16 +7830,16 @@ msgid "Optimize orientation" msgstr "Tájolás optimalizálása" msgid "Optimize Rotation" -msgstr "Tájolás Optimalizálása" +msgstr "Forgatás optimalizálása" msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" -"Úgy optimalizálja az utazási mozgásokat, hogy minimalizálja a kerületek " +"Optimalizálja az utazási mozgásokat, hogy minimalizálja a peremterületek " "keresztezését. Ez főként a szivárgástól szenvedő Bowden extrudereknél " -"hasznos. Ez a funkció lassítja a nyomtatást és a G-kód generálást." +"hasznos. Ez a funkció lelassítja mind a nyomtatást, mind a G-kód generálását." msgid "Options" msgstr "Opciók" @@ -5366,28 +7851,31 @@ msgid "Options:" msgstr "Opciók:" msgid "or press \"+\" key" -msgstr "vagy nyomja meg a \"+\" billentyűt" +msgstr "nyomja meg a \"+\" billentyűt" msgid "Order object volumes by types" msgstr "Objektum térfogatok rendezése típus szerint" msgid "Orientation found." -msgstr "Tájolás megtalálva." +msgstr "Táájolás megvan." msgid "Orientation search canceled." -msgstr "Tájolás keresés visszavonva." +msgstr "Tájolás keresés törlésre került." msgid "Origin" -msgstr "Origó" +msgstr "Eredet" msgid "Other" msgstr "Egyéb" msgid "Other layers" -msgstr "További rétegek" +msgstr "Egyéb rétegek" msgid "Other Vendors" -msgstr "További Gyártók" +msgstr "Egyéb gyártók" + +msgid "Outer" +msgstr "Külső" msgid "Outer and inner brim" msgstr "Külső és belső karima" @@ -5395,8 +7883,11 @@ msgstr "Külső és belső karima" msgid "Outer brim only" msgstr "Csak külső karima" +msgid "Outer XY size compensation" +msgstr "Külső XY méretkompenzáció" + msgid "Output File" -msgstr "Kimeneti Fájl" +msgstr "Kimeneti fájl" msgid "Output file" msgstr "Kimeneti fájl" @@ -5404,80 +7895,136 @@ msgstr "Kimeneti fájl" msgid "Output filename format" msgstr "Kimeneti fájlnév formátum" +msgid "Output Format" +msgstr "Kimeneti formátum" + msgid "Output Model Info" -msgstr "Modell Információ Kimenet" +msgstr "Kimeneti modell infó" msgid "Output options" -msgstr "Kimeneti lehetőségek" +msgstr "Kimeneti opciók" msgid "Outside walls" msgstr "Külső fal" +msgid "Over-Bridge calibration" +msgstr "Over-Bridge kalibráció" + +msgid "Over-bridge calibration" +msgstr "Over-bridge kalibráció" + msgid "Overflow" msgstr "Túlcsordulás" +msgid "Overhang bridge flow threshold" +msgstr "Túlnyúló híd áramlási küszöbérték" + +msgid "Overhang bridge speed threshold" +msgstr "Túlnyúló híd sebességküszöb" + msgid "Overhang perimeter" -msgstr "Túllógó kerület" +msgstr "Túlnyúlás kerülete" + +msgid "Overhang reversal" +msgstr "Túlnyúlás megfordítása" + +msgid "Overhang reversal threshold" +msgstr "Túlnyúlás megfordítási küszöbértéke" msgid "Overhang threshold" -msgstr "Túlnyúlási küszöbértéke" +msgstr "Túlnyúlási küszöbérték" + +msgid "Overhangs" +msgstr "Túlnyúlások" + +msgid "Overhangs speed" +msgstr "Túlnyúlások sebessége" msgid "Overlap" msgstr "Átfedés" +msgid "" +"Overlap between the thin wall and the perimeters. Can be a % of the external " +"perimeter width (default 50%)" +msgstr "" +"Átfedés a vékony fal és a peremek között. A külső kerület szélességének %-a " +"lehet (alapértelmezett 50%)." + +msgid "Overlapping all perimeters" +msgstr "Minden határ átfedése" + +msgid "Overlapping external perimeter" +msgstr "Átfedő külső kerület" + +msgid "" +"Override the retract_length setting from the printer config. Used for " +"calibration. Set negative to disable" +msgstr "" +"A nyomtató konfigjában megadott retract_length érték felülírása. " +"Kalibráláshoz használatos. Negatív érték letiltja" + +msgid "" +"Override the temperature of the extruder. Avoid making too many changes, it " +"won't stop for cooling/heating. 0 to disable. May only work on Height range " +"modifiers." +msgstr "" +"Az extruder hőmérsékletének felülbírálása. Kerülje a túl sok módosítást, nem " +"áll meg a hűtés/fűtés. 0 a letiltáshoz. Csak a magassági tartomány " +"módosítókon működhet." + msgid "P&rint Settings Tab" -msgstr "Nyomtatási Beállítások Fül" +msgstr "N&yomtatási beállítások lap" msgid "Pad" msgstr "Párna" msgid "Pad around object" -msgstr "Párna az objektum körül" +msgstr "Párna körüli tárgy" msgid "Pad around object everywhere" -msgstr "Párna az objektum körül mindenhol" +msgstr "Pad körül tárgy mindenhol" msgid "Pad brim size" -msgstr "Párna karima mérete" +msgstr "Pad perem mérete" msgid "Pad brim size is too small for the current configuration." -msgstr "A párna karimájának mérete túl kicsi a jelenlegi konfigurációhoz." +msgstr "A pad karimája túl kicsi az aktuális konfigurációhoz." msgid "Pad object connector penetration" -msgstr "Párna objektum összekötő benyúlása" +msgstr "Pad objektum csatlakozó behatolása" msgid "Pad object connector stride" -msgstr "Párna objektum összekötő lépésköz" +msgstr "Pad objektum csatlakozó lépés" msgid "Pad object connector width" -msgstr "Párna objektum összekötő szélessége" +msgstr "Pad objektum csatlakozó szélessége" msgid "Pad object gap" -msgstr "Párna objektum hézag" +msgstr "Pad tárgy hézag" msgid "Pad wall height" -msgstr "Párna fal magassága" +msgstr "Pad fal magassága" msgid "Pad wall slope" -msgstr "Párnafal meredekség" +msgstr "Pad fal lejtése" msgid "Pad wall thickness" -msgstr "Párna falvastagság" +msgstr "Pad falvastagság" msgid "Page Down" -msgstr "Page Down" +msgstr "Oldal le" msgid "Page Up" -msgstr "Page Up" +msgstr "Oldal fel" msgid "Paint-on seam" msgstr "Varrat festése" msgid "Paint-on supports" -msgstr "Támaszték festés" +msgstr "Festett támaszok" msgid "Paints all facets inside, regardless of their orientation." -msgstr "Minden felületre fest, tájolástól függetlenül." +msgstr "Minden oldalt belülről fest, tájolásuktól függetlenül." msgid "Paints facets according to the chosen painting brush." msgstr "A felületeket a választott festőecset szerint festi." @@ -5492,28 +8039,28 @@ msgid "Paints only one facet." msgstr "Csak egy felületet fest meg." msgid "parameter name" -msgstr "paraméter név" +msgstr "paraméter neve" msgid "Parameter validation" -msgstr "Paraméter hitelesítés" +msgstr "Paraméter érvényesítés" msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"A host válasz elemzése nem sikerült. \n" -"Message body: \"%1%\" \n" -"Message: \"%2%\"" +"Az állomás válaszának elemzése sikertelen.\n" +"Üzenet teste: \"%1%\"\n" +"Hiba: \"%2%\"" msgid "Part" -msgstr "Alkatrész" +msgstr "Rész" msgid "Part manipulation" -msgstr "Alkatrész manipuláció" +msgstr "Részmanipuláció" msgid "Part Settings to modify" -msgstr "Módosítható alkatrész beálltások" +msgstr "Módosítandó részbeállítások" msgid "Password" msgstr "Jelszó" @@ -5522,40 +8069,66 @@ msgid "Paste" msgstr "Beillesztés" msgid "Paste clipboard" -msgstr "Beillesztés a vágólapról" +msgstr "Beillesztés vágólapra" msgid "Paste from clipboard" -msgstr "Beillesztés a vágólapról" +msgstr "Beillesztés vágólapról" msgid "Paste From Clipboard" -msgstr "Beillesztés Vágólapról" +msgstr "Beillesztés vágólapról" + +msgid "Paths" +msgstr "Útvonalak" msgid "Pattern" msgstr "Mintázat" msgid "Pattern angle" -msgstr "Mintázat szöge" +msgstr "Minta szög" + +msgid "" +"Pattern for the ear. The concentric is the default one. The rectilinear has " +"a perimeter around it, you can try it if the concentric has too many " +"problems to stick to the build plate." +msgstr "" +"Mintázat a fülhöz. A koncentrikus az alapértelmezett. A egyenes vonalúnak " +"van egy kerülete körül, ezt kipróbálhatja, ha a koncentrikusnak túl sok " +"problémája van azzal, hogy megtapadjon az építőlemezen." msgid "Pattern spacing" -msgstr "Mintázat térköze" +msgstr "Mintatávolság" msgid "Pattern used to generate support material." -msgstr "Támaszanyag létrehozásához használt mintázat." +msgstr "Támaszték létrehozásához használt minta." msgid "Pause" -msgstr "Felfüggesztés" +msgstr "Szünet" + +msgid "Pause before extraction " +msgstr "Szünet a kihúzás előtt " + +msgid "Pause in melt zone" +msgstr "Szünet az olvadási zónában" msgid "Pause print (\"%1%\")" -msgstr "Nyomtatás Szüneteltetése (\"%1%\")" +msgstr "Nyomtatás szünetelés (\"%1%\")" msgid "Pause Print G-code" -msgstr "G-kód Nyomtatás Szüneteltetése" +msgstr "Nyomtatási szünet G-kód" + +msgid "" +"Percent of a flow rate relative to object's normal layer height. It's the " +"percentage of the layer that will be over-extruded on top to do the ironing." +msgstr "" +"Az áramlási sebesség százaléka az objektum normál rétegmagasságához " +"viszonyítva. Ez annak a rétegnek a százalékos aránya, amelyet túlnyomnak a " +"tetejére a vasalás elvégzéséhez." msgid "Percentage" msgstr "Százalék" msgid "Perform cut" -msgstr "Vágás végrehajtása" +msgstr "Vágás elvégzése" msgid "" "Perform desktop integration (Sets this binary to be searchable by the " @@ -5568,29 +8141,56 @@ msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" -"Teljesítmény kontra számítási pontosság. Az alacsonyabb értékek nemkívánatos " -"műtermékeket okozhatnak." +"Teljesítmény vs. számítási pontosság. Az alacsonyabb értékek nemkívánatos " +"leleteket eredményezhetnek." msgid "Perimeter" msgstr "Kerület" +msgid "Perimeter acceleration" +msgstr "Kerületi gyorsulás" + +msgid "Perimeter bonding" +msgstr "Kerületi kötés" + msgid "Perimeter extruder" -msgstr "Kerület extruder" +msgstr "Kerületi extruder" + +msgid "Perimeter loop seam" +msgstr "Kerületi hurokvarrás" + +msgid "perimeter overlap" +msgstr "kerületi átfedés" + +msgid "Perimeter overlap" +msgstr "Kerületi átfedés" + +msgid "Perimeter spacing" +msgstr "Kerületi távolság" + +msgid "Perimeter width" +msgstr "Kerületi szélesség" msgid "perimeters" -msgstr "határ _ nyomtatásakor" +msgstr "kerületek" msgid "Perimeters" msgstr "Kerületek" +msgid "Perimeters count" +msgstr "Peremek száma" + +msgid "Perimeters loop" +msgstr "Kerületi hurok" + msgid "Physical Printer" -msgstr "Fizikai Nyomtató" +msgstr "Fizikai nyomtató" msgid "Physical printers" msgstr "Fizikai nyomtatók" msgid "Pick another vendor supported by %s" -msgstr "A %s által támogatott egyéb gyártó kiválasztása" +msgstr "Válasszon egy másik %s által támogatott szállítót" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " @@ -5599,8 +8199,11 @@ msgstr "" "A képméreteket .gcode és .sl1 / .sl1s fájlokban kell tárolni, a következő " "formátumban: \"XxY, XxY, ...\"." +msgid "Pigment percentage" +msgstr "Pigment százalék" + msgid "Pillar connection mode" -msgstr "Pillér összekötési mód" +msgstr "Pillér csatlakozási mód" msgid "Pillar diameter" msgstr "Pillér átmérője" @@ -5609,7 +8212,7 @@ msgid "Pillar widening factor" msgstr "Pillérszélesítési tényező" msgid "Pinhead diameter should be smaller than the pillar diameter." -msgstr "A tűfej átmérőjének kisebbnek kell lennie, az oszlop átmérőjénél." +msgstr "A tűfej átmérőjének kisebbnek kell lennie, mint az oszlop átmérőjének." msgid "Pinhead front diameter" msgstr "Tűfej elülső átmérője" @@ -5621,13 +8224,18 @@ msgid "Place bearings in slots and resume printing" msgstr "Helyezze a csapágyakat a nyílásokba, és folytassa a nyomtatást" msgid "Place on face" -msgstr "Felületre helyezés" +msgstr "Helyezze az arcra" msgid "Plater" msgstr "Tárgyasztal" +msgid "Platter" +msgstr "Tálca" + msgid "Please check your object list before preset changing." -msgstr "Ellenőrizze az objektumlistát, előbeállítás váltás előtt." +msgstr "" +"Kérjük, ellenőrizze az objektumlistát, mielőtt megváltoztatja az " +"előbeállításokat." msgid "" "Please save your project and restart PrusaSlicer. We would be glad if you " @@ -5637,7 +8245,13 @@ msgstr "" "jelentené a problémát." msgid "Please select the file to reload" -msgstr "Válassza ki az újratöltendő fájlt" +msgstr "Kérjük, válassza ki az újratölteni kívánt fájlt" + +msgid "Polyhole detection margin" +msgstr "Polyhole észlelési határérték" + +msgid "Polyhole twist" +msgstr "Polyhole twist" msgid "Portions copyright" msgstr "Az összetevők szerzői joga" @@ -5649,13 +8263,16 @@ msgid "Position" msgstr "Pozíció" msgid "Position of perimeters starting points." -msgstr "A kerületi kiindulási pontok helyzete." +msgstr "A kerület kezdőpontjainak helyzete." msgid "Post processing scripts shall modify G-code file in place." msgstr "Az utófeldolgozási szkriptek a G-kód fájlt helyben módosítják." msgid "Post-processing scripts" -msgstr "Utófeldolgozó szkriptek" +msgstr "Szkriptek utófeldolgozása" + +msgid "Precision" +msgstr "Precíziós" msgid "Preferences" msgstr "Beállítások" @@ -5664,13 +8281,13 @@ msgid "Preferred direction of the seam" msgstr "A varrat preferált iránya" msgid "Preferred direction of the seam - jitter" -msgstr "Varrat preferált iránya - jitter" +msgstr "A varrat preferált iránya - remegés" msgid "Preparing infill" msgstr "Kitöltés előkészítése" msgid "Preparing settings tabs" -msgstr "A beállítások fül előkészítése" +msgstr "Beállítások lapjainak előkészítése" msgid "" "Preselects faces by overhang angle. It is possible to restrict paintable " @@ -5682,21 +8299,21 @@ msgstr "" msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "" -"A \"%1%\" előbeállítás a következő el nem mentett változásokat tartalmazza:" +"A \"%1%\" előbeállítás a következő mentetlen módosításokkal rendelkezik:" msgid "" "Preset \"%1%\" is not compatible with the new print profile and it has the " "following unsaved changes:" msgstr "" "A \"%1%\" előbeállítás nem kompatibilis az új nyomtatási profillal, és a " -"következő el nem mentett változtatásokat tartalmazza:" +"következő mentetlen módosításokat tartalmazza:" msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" "A \"%1%\" előbeállítás nem kompatibilis az új nyomtatóprofillal, és a " -"következő el nem mentett változtatásokat tartalmazza:" +"következő mentetlen módosításokat tartalmazza:" msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " @@ -5708,6 +8325,9 @@ msgstr "" msgid "Preset with name \"%1%\" already exists." msgstr "A \"%1%\" nevű előbeállítás már létezik." +msgid "Presets and updates" +msgstr "Előbeállítások és frissítések" + msgid "" "Presets are different.\n" "Click this button to select the same preset for the right and left preset." @@ -5720,7 +8340,7 @@ msgid "Presets are the same" msgstr "Az előbeállítások megyegyeznek" msgid "Press %1%left mouse button to enter the exact value" -msgstr "Nyomja meg a %1% bal egérgombot a pontos érték megadásához" +msgstr "Nyomja meg az %1% bal egérgombot a pontos érték megadásához" msgid "Press to activate deselection rectangle" msgstr "Nyomja meg a kijelölés megszüntetése téglalap aktiválásához" @@ -5733,26 +8353,33 @@ msgid "" "or move multiple objects with mouse" msgstr "" "Nyomja meg a gombot több objektum kiválasztásához\n" -"vagy egérrel való mozgatásáshoz" +"vagy több objektum mozgatása az egérrel" msgid "" "Press to speed up 5 times while moving thumb\n" "with arrow keys or mouse wheel" msgstr "" -"Nyomja meg 5-szörös gyorsításhoz a jelölő\n" -"nyílbillentyűkkel vagy egérgörgővel való mozgatása közben" +"Nyomja meg 5-ször a gyorsításhoz, miközben a hüvelykujját mozgatja\n" +"a nyílbillentyűkkel vagy az görgővel" + +msgid "" +"Prevent the gcode builder from triggering an exception if a full layer is " +"empty, and allow the print to start from thin air afterward." +msgstr "" +"Megakadályozza, hogy a G-kód builder kivételt indítson, ha egy teljes réteg " +"üres, és lehetővé teszi, hogy a nyomtatás utána a levegőből induljon." msgid "Preview" msgstr "Előnézet" msgid "Preview hollowed and drilled model" -msgstr "Az üreges és kifúrt modell előnézete" +msgstr "Előnézet üreges és fúrt modell" msgid "Previously sliced file (" -msgstr "A korábban szeletelt fájl (" +msgstr "Korábban szeletelt fájl (" msgid "Prime all printing extruders" -msgstr "Az összes nyomtató extruder előkészítése" +msgstr "Az összes nyomtató extruder alapozása" msgid "print" msgstr "nyomtatás" @@ -5761,38 +8388,66 @@ msgid "Print" msgstr "Nyomtatás" msgid "Print &Host Upload Queue" -msgstr "Nyomtató-feltöltési várakozási sor" +msgstr "Nyomtatás Gazdagép feltöltési várólista" + +msgid "Print a calibration cube, for various calibration goals." +msgstr "Kalibrációs kocka nyomtatása, különböző kalibrációs célokhoz." + +msgid "Print all brim at startup" +msgstr "Minden perem nyomtatása indításkor" + +msgid "Print at the end" +msgstr "Nyomtatás a végén" msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" -"A kerületeket a legkülsőtől a legbelsőig nyomtatja az alapértelmezett " +"Nyomtasson kontúr kerületeket a legkülsőtől a legbelsőig az alapértelmezett " "fordított sorrend helyett." +msgid "" +"Print contour perimeters in two circles, in a continuous way, like for a " +"vase mode. It needs the external_perimeters_first parameter to work. \n" +"Doesn't work for the first layer, as it may damage the bed overwise. \n" +"Note that it will use min_layer_height from your hardware setting as the " +"base height (it doesn't start at 0), so be sure to put here the lowest value " +"your printer can handle. if it's not lower than two times the current layer " +"height, it falls back to the normal algorithm, as there is not enough room " +"to do two loops." +msgstr "" +"Nyomtasson kontúr kerületeket két körben, folyamatosan, mint egy váza " +"módhoz. Működéséhez szükség van az external_perimeters_first paraméterre.\n" +"Az első rétegnél nem működik, mert túlságosan károsíthatja az ágyat.\n" +"Vegye figyelembe, hogy alapmagasságként a hardverbeállítások " +"min_layer_height-ját fogja használni (nem 0-val kezdődik), ezért ügyeljen " +"arra, hogy a nyomtató által kezelhető legalacsonyabb értéket adja meg. ha " +"nem kisebb, mint az aktuális rétegmagasság kétszerese, akkor visszaesik a " +"normál algoritmusra, mivel nincs elég hely két hurok megtételére." + msgid "Print Diameters" msgstr "Nyomtatási átmérők" msgid "Print Host upload" -msgstr "Nyomtató feltöltés" +msgstr "Nyomtatás Gazdagép feltöltés" msgid "Print host upload queue" -msgstr "Nyomtató-feltöltési várakozási sor" +msgstr "Host feltöltési várólista nyomtatása" msgid "Print mode" msgstr "Nyomtatási mód" msgid "Print pauses" -msgstr "Nyomtátási szünetek" +msgstr "Nyomtatási szünetek" msgid "Print settings" msgstr "Nyomtatási beállítások" msgid "Print Settings" -msgstr "Nyomtatási Beállítások" +msgstr "Nyomtatás beállításai" msgid "Print Settings Tab" -msgstr "Nyomtatási Beállítások Fül" +msgstr "Nyomtatási beállítások lap" msgid "Print speed" msgstr "Nyomtatási sebesség" @@ -5800,8 +8455,23 @@ msgstr "Nyomtatási sebesség" msgid "Print speed override" msgstr "Nyomtatási sebesség felülbírálás" +msgid "" +"print speed will be reduced so that no less than %1%s are spent on that layer" +msgstr "" +"a nyomtatási sebességet úgy csökkentjük, hogy az adott rétegre legalább %1%-" +"nyi időt fordítunk" + +msgid "" +"Print the thumbnail code at the end of the gcode file instead of the front.\n" +"Be careful! Most firmwares expect it at the front, so be sure that your " +"firmware support it." +msgstr "" +"A miniatűr kódot a G-kód fájl eleje helyett a végén nyomtatja ki.\n" +"Legyen óvatos! A legtöbb firmware az elején várja el, ezért győződjön meg " +"róla, hogy a firmware támogatja." + msgid "Print&er Settings Tab" -msgstr "Nyomtató Beállítások Fül" +msgstr "Nyomtat&ási beállítások lap" msgid "printer" msgstr "nyomtató" @@ -5813,19 +8483,19 @@ msgid "Printer absolute correction" msgstr "Nyomtató abszolút korrekció" msgid "Printer gamma correction" -msgstr "Nyomtató Gamma korrekció" +msgstr "Nyomtató gamma korrekció" msgid "printer model" msgstr "nyomtató modell" msgid "Printer notes" -msgstr "Nyomtató megjegyzések" +msgstr "Nyomtató jegyzetek" msgid "Printer preset names" msgstr "Nyomtató előbeállítás nevek" msgid "Printer scaling correction" -msgstr "Nyomtató méretkorrekciója" +msgstr "Nyomtató méretezés korrekció" msgid "Printer scaling correction in X axis" msgstr "Nyomtató méretkorrekciója az X tengelyen" @@ -5846,22 +8516,22 @@ msgid "Printer scaling Z axis correction" msgstr "Nyomtató méretkorrekciója a Z tengelyen" msgid "Printer Settings" -msgstr "Nyomtató Beállítások" +msgstr "Nyomtatóbeállítások" msgid "Printer Settings Tab" -msgstr "Nyomtató Beállítások Fül" +msgstr "Nyomtató beállítások lap" msgid "Printer technology" msgstr "Nyomtató technológia" msgid "Printer type" -msgstr "Nyomtató típusa" +msgstr "Nyomtató típus" msgid "Printer variant" msgstr "Nyomtató változat" msgid "Printer vendor" -msgstr "Nyomtató szállítója" +msgstr "Nyomtató gyártója" msgid "Printer with name \"%1%\" already exists." msgstr "A \"%1%\" nevű nyomtató már létezik." @@ -5875,9 +8545,9 @@ msgid "" "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" -"Nyomtatás több, különböző fúvókaátmérőjű extruderrel. Ha a támasztékot az " -"aktuális extruderrel kell nyomtatni (support_material_extruder == 0 vagy " -"support_material_interface_extruder == 0), akkor minden fúvókának azonos " +"Nyomtatás többféle, különböző fúvókaátmérőjű extruderrel. Ha a támasztékot " +"az aktuális extruderrel kell nyomtatni (support_material_extruder == 0 vagy " +"support_material_interface_extruder == 0), minden fúvókának azonos " "átmérőjűnek kell lennie." msgid "Processing %s" @@ -5890,14 +8560,17 @@ msgid "Profile:" msgstr "Profil:" msgid "Progress" -msgstr "Előrehaladás" +msgstr "Haladás" msgid "Progress:" -msgstr "Előrehaladás:" +msgstr "Folyamat:" msgid "Project is loading" msgstr "A projekt betöltődik" +msgid "Prusa SL1" +msgstr "Prusa SL1" + msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" msgstr "A PrusaSlicer végzetes hibába ütközött: \"%1%\"" @@ -5909,36 +8582,60 @@ msgid "" "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" -"A szerszámcsere utáni tisztítás az objektum kitöltésén belül történik. Ez " +"A szerszámcsere utáni tisztítás az objektum kitöltésein belül történik. Ez " "csökkenti a hulladék mennyiségét, de a további mozgások miatt hosszabb " "nyomtatási időt eredményezhet." msgid "Purging volumes" -msgstr "Öblítési térfogatok" +msgstr "Tisztítási térfogatok" msgid "Purging volumes - load/unload volumes" -msgstr "Öblítési mennyiségek - betöltött/kiürített téfogat" +msgstr "Kötetek tisztítása - kötetek betöltése/kiürítése" msgid "Purging volumes - matrix" -msgstr "Öblítési mennyiségek - mátrix" +msgstr "Tisztítási mennyiségek - mátrix" msgid "Purpose of Machine Limits" msgstr "A gépi korlátok célja" +msgid "" +"Put here the gcode to change the toolhead (called after the g-code T" +"{next_extruder}). You have access to {next_extruder} and " +"{previous_extruder}. next_extruder is the 'extruder number' of the new " +"milling tool, it's equal to the index (begining at 0) of the milling tool " +"plus the number of extruders. previous_extruder is the 'extruder number' of " +"the previous tool, it may be a normal extruder, if it's below the number of " +"extruders. The number of extruder is available at {extruder} and the number " +"of milling tool is available at {milling_cutter}." +msgstr "" +"Tegye ide a szerszámfej cseréjéhez szükséges g-kódot (a T{next_extruder} g-" +"kód után hívjuk). Hozzáférésed van a {next_extruder} és {previous_extruder} " +"értékekhez. next_extruder az új marószerszám 'extruder száma', ez egyenlő a " +"marószerszám indexével (0-val kezdődik) plusz az extruderek számával. " +"previous_extruder az előző szerszám 'extruder száma', ez lehet egy normál " +"extruder, ha az extruderek száma alatt van. Az extruder száma a {extruder}, " +"a marószerszám száma pedig a {milling_cutter} alatt érhető el." + +msgid "Quadratric" +msgstr "Kvadratikus" + msgid "Quality" msgstr "Minőség" msgid "Quality / Speed" -msgstr "Minőség / Sebesség" +msgstr "Minőség / sebesség" msgid "Quick" msgstr "Gyors" +msgid "Quick Save" +msgstr "Gyors mentés" + msgid "Quick Slice" -msgstr "Gyors Szeletelés" +msgstr "Gyors szeletelés" msgid "Quick Slice and Save As" -msgstr "Gyors Szeletelés és Mentés Másként" +msgstr "Gyors szeletelés és mentés" msgid "Quit %s" msgstr "Kilépés %s" @@ -5962,7 +8659,7 @@ msgid "Raft layers" msgstr "Tutaj rétegek" msgid "Ramming customization" -msgstr "Tömörítés testreszabása" +msgstr "Rammelés testreszabása" msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" @@ -5975,28 +8672,27 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"A tömörítés az egy extruderes Többféle Anyaggal (MM) dolgozó nyomtatókban a " -"szerszámcsere előtti gyors extrudálást jelenti. Célja, hogy megfelelően " -"alakítsa a visszahúzott filament végét, hogy az ne akadályozza az új " -"filament betöltését, és később újra betölthető legyen. Ez a fázis fontos, és " -"a különböző anyagok különböző extrudálási sebességet igényelhetnek a " -"megfelelő forma eléréséhez. Ezért a tömörítés során alkalmazott extrudálási " -"sebességek állíthatóak.\n" +"Az egy extruderes MM-nyomtatóban a szerszámcsere előtti gyors extrudálást " +"jelenti. Célja, hogy megfelelően alakítsa a kitöltetlen szál végét, hogy az " +"ne akadályozza az új szál behelyezését, és később újra behelyezhető legyen. " +"Ez a fázis fontos, és a különböző anyagok különböző extrudálási sebességet " +"igényelhetnek a megfelelő forma eléréséhez. Ezért a tömörítés során az " +"extrudálási sebességek állíthatóak.\n" "\n" -"Ez egy szakértői szintű beállítás, a helytelen beállítás elakadásokhoz, az " -"extruder kerék filamentbe marásához stb. vezethet." +"Ez egy szakértői szintű beállítás, a helytelen beállítás valószínűleg " +"elakadásokhoz, az extruder kerék filamentbe csiszolásához stb. vezet." msgid "Ramming line spacing" -msgstr "Tömörítési vonal térköze" +msgstr "Távolság a roppantósoron" msgid "Ramming line width" msgstr "Tömörítési vonal szélessége" msgid "Ramming parameters" -msgstr "Tömörítési paraméterek" +msgstr "Döngölési paraméterek" msgid "Ramming settings" -msgstr "Tömörítési beállítások" +msgstr "Döngölési beállítások" msgid "Random" msgstr "Véletlen" @@ -6008,7 +8704,7 @@ msgid "Range" msgstr "Tartomány" msgid "Rasterizing layers" -msgstr "Rétegek raszterizálása" +msgstr "Raszterizálási rétegek" msgid "Re&load from Disk" msgstr "Újratöltés lemezről" @@ -6020,7 +8716,7 @@ msgid "Ready" msgstr "Kész" msgid "Rear" -msgstr "Hátul" +msgstr "Hátsó" msgid "Rear View" msgstr "Hátulnézet" @@ -6028,35 +8724,62 @@ msgstr "Hátulnézet" msgid "Recent projects" msgstr "Legutóbbi projektek" +msgid "" +"Recommended min extrusion width for other layers (with a layer height of " +"%1%) is %2$.3f mm (or %3%%%).\n" +msgstr "" +"Az ajánlott minimális extrudálási szélesség más rétegeknél (%1% " +"rétegmagassággal) %2$.3f mm (vagy %3%%%).\n" + +msgid "" +"Recommended min extrusion width for the first layer (with a first layer " +"height of %1%) is %2$.3f mm (or %3%%%)\n" +msgstr "" +"Az első réteg ajánlott minimális extrudálási szélessége (az első réteg " +"magassága %1%) %2$.3f mm (vagy %3%%%).\n" + +msgid "Recommended object min (thick) wall thickness for layer height %.2f and" +msgstr "Ajánlott tárgy min (vastag) falvastagság rétegmagassághoz %.2f és" + +msgid "" +"Recommended object min thin wall thickness: Not available due to invalid " +"layer height." +msgstr "" +"Ajánlott tárgy min vékony falvastagság: Nem elérhető az érvénytelen " +"rétegmagasság miatt." + msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" -"Az objektum javasolt vékony falvastagsága: Nem elérhető a túl kicsi " -"extrudálási szélesség miatt." +"Ajánlott tárgy vékony falvastagság: Túlságosan kicsi extrudálási szélesség " +"miatt nem elérhető." msgid "Recreating" -msgstr "Újralétrehozás_" +msgstr "Újraalkotása" msgid "Rectangular" -msgstr "Négyzetes" +msgstr "Négyszögletes" msgid "Rectilinear" -msgstr "Egyenesvonalú" +msgstr "Egyenes vonalú" + +msgid "Rectilinear (filled)" +msgstr "Egyenes (töltött)" msgid "Rectilinear grid" -msgstr "Egyenesvonalú háló" +msgstr "Derékszögű rács" msgid "Redo" msgstr "Mégis" msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" -msgstr[0] "%1$d Művelet Mégis" -msgstr[1] "%1$d Művelet Mégis" +msgstr[0] "%1$d művelet újraindítása" +msgstr[1] "%1$d műveletek újraindítása" msgid "Redo History" -msgstr "Előzmények alkalmazása" +msgstr "Újraindítás előzmények" msgid "Reduced overhang slopes" msgstr "Csökkentett túlnyúlás meredekség" @@ -6065,7 +8788,7 @@ msgid "Reducing printing time" msgstr "Nyomtatási idő csökkentése" msgid "Refresh Printers" -msgstr "Nyomtatók Frissítése" +msgstr "Nyomtatók frissítése" msgid "Regular" msgstr "Általános" @@ -6077,16 +8800,22 @@ msgid "Release only" msgstr "Csak normál kiadás" msgid "Reload all from disk" -msgstr "Minden újratöltése lemezről" +msgstr "Újratöltés lemezről" msgid "Reload from disk" msgstr "Újratöltés lemezről" msgid "Reload from:" -msgstr "Újratöltés innen:" +msgstr "Újratöltés:" + +msgid "Reload platter from disk" +msgstr "Tálca újratöltése lemezről" msgid "Reload the plater from disk" -msgstr "Tárgyasztal újratöltése lemezről" +msgstr "A tálca újratöltése a lemezről" + +msgid "Reload the platter from disk" +msgstr "Lemez újratöltése lemezről" msgid "Remaining errors" msgstr "Fennmaradó hibák" @@ -6095,37 +8824,40 @@ msgid "Remaining time" msgstr "Hátralévő idő" msgid "Remember my choice" -msgstr "Emlékezzen a választásomra" +msgstr "Emlékezz a döntésemre" msgid "Remember output directory" -msgstr "Emlékezzen a kimeneti könyvtárra" +msgstr "Kimeneti könyvtár megjegyzése" msgid "Remove" msgstr "Eltávolítás" msgid "remove" -msgstr "eltávolít" +msgstr "eltávolítás" msgid "Remove all holes" -msgstr "Összes furat eltávolítása" +msgstr "Minden lyuk eltávolítása" msgid "Remove all points" -msgstr "Összes pont eltávolítása" +msgstr "Minden pont eltávolítása" msgid "Remove all selection" -msgstr "Az összes kijelölés eltávolítása" +msgstr "Minden kijelölés eltávolítása" msgid "Remove detail" msgstr "Részlet eltávolítása" msgid "Remove extruder from sequence" -msgstr "Extruder elávolítása a sorozatból" +msgstr "Extruder eltávolítása a szekvenciából" + +msgid "Remove fil. slowdown" +msgstr "Szál lass. megszüntetés" msgid "Remove instance" -msgstr "Példány eltávolítása" +msgstr "Példa eltávolítása" msgid "Remove Instance of the selected object" -msgstr "A kijelölt objektum egy példányának eltávolítása" +msgstr "A kiválasztott objektum példányának eltávolítása" msgid "Remove layer range" msgstr "Rétegtartomány eltávolítása" @@ -6142,14 +8874,17 @@ msgstr "Felfestett támasztékok eltávolítása" msgid "Remove parameter" msgstr "Paraméter eltávolítása" +msgid "Remove perimeters" +msgstr "Kerületek eltávolítása" + msgid "Remove point" msgstr "Pont eltávolítása" msgid "Remove point from selection" -msgstr "Pont eltávolítása kijelölésből" +msgstr "Pont eltávolítása a kijelölésből" msgid "Remove selected holes" -msgstr "Kijelölt furatok eltávolítása" +msgstr "Kijelölt lyukak eltávolítása" msgid "Remove selected points" msgstr "Kijelölt pontok eltávolítása" @@ -6158,16 +8893,16 @@ msgid "Remove selection" msgstr "Kijelölés eltávolítása" msgid "Remove user profiles (a snapshot will be taken beforehand)" -msgstr "Felhasználói profilok eltávolítása (előtte pillanatfelvétel készül)" +msgstr "Felhasználói profilok eltávolítása (előzetesen pillanatkép készül)" msgid "Remove variable layer height" msgstr "Változó rétegmagasság eltávolítása" msgid "Rename Object" -msgstr "Objektum átnevezése" +msgstr "Tárgy átnevezése" msgid "Rename Sub-object" -msgstr "Al-objektum átnevezése" +msgstr "Alobjektum átnevezése" msgid "Renaming" msgstr "Átnevezés" @@ -6189,8 +8924,8 @@ msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" -"Renderelés szoftveres renderelővel. A mellékelt MESA szoftveres renderelő " -"töltődik be az alapértelmezett OpenGL-illesztőprogram helyett." +"Renderelés szoftveres renderelővel. A csomagban található MESA szoftveres " +"renderelő betöltődik az alapértelmezett OpenGL illesztőprogram helyett." msgid "Repair" msgstr "Javítás" @@ -6199,13 +8934,13 @@ msgid "Repaired 3MF file contains more than one object" msgstr "A javított 3MF fájl egynél több objektumot tartalmaz" msgid "Repaired 3MF file contains more than one volume" -msgstr "A javított 3MF fájl egynél több térfogatot tartalmaz" +msgstr "A javított 3MF fájl egynél több kötetet tartalmaz" msgid "Repaired 3MF file does not contain any object" msgstr "A javított 3MF fájl nem tartalmaz objektumot" msgid "Repaired 3MF file does not contain any volume" -msgstr "A javított 3MF fájl nem tartalmaz térfogatot" +msgstr "A javított 3MF fájl nem tartalmaz kötetet" msgid "Repairing model" msgstr "Modell javítása" @@ -6217,10 +8952,10 @@ msgid "Repairing was canceled" msgstr "A javítást vissza lett vonva" msgid "Repeat Last Quick Slice" -msgstr "Az Előző Gyors Szeletetelés Megismétlése" +msgstr "Utolsó gyors szeletelés megismétlése" msgid "Repeat last quick slice" -msgstr "Az előző gyors szeletetelés megismétlése" +msgstr "Ismételje meg az utolsó gyors szeletelést" msgid "Replace from:" msgstr "Helyettesítés innen:" @@ -6232,13 +8967,13 @@ msgid "Replace with STL" msgstr "Helyettesítés STL-lel" msgid "Replace?" -msgstr "Lecseréli?" +msgstr "Csere?" msgid "Report an I&ssue" -msgstr "Hibabejelentés" +msgstr "Probléma &jelentése" msgid "Report an issue on %s" -msgstr "Probléma bejelentése itt: %s" +msgstr "Jelentsen egy problémát a %s témában" msgid "requires max. %s" msgstr "max. %s szükséges" @@ -6247,10 +8982,10 @@ msgid "requires min. %s" msgstr "min. %s szükséges" msgid "requires min. %s and max. %s" -msgstr "min. %s és max. %s szükséges" +msgstr "min. %s és max. %s értéket igényel" msgid "Rescan" -msgstr "Újra keresés" +msgstr "Újraolvasás" msgid "Reset" msgstr "Visszaállítás" @@ -6262,25 +8997,25 @@ msgid "Reset direction" msgstr "Irány visszaállítása" msgid "Reset Project" -msgstr "Projekt Újraindítása" +msgstr "Projekt visszaállítása" msgid "Reset rotation" -msgstr "Forgatás visszaállítása" +msgstr "Forgás visszaállítása" msgid "Reset Rotation" -msgstr "Forgatás Visszaállítása" +msgstr "Forgás Visszaállítása" msgid "Reset scale" msgstr "Skála visszaállítása" msgid "Reset selection" -msgstr "Kijelölés visszaállítása" +msgstr "Kiválasztás visszaállítása" msgid "Reset to base" msgstr "Alaphelyzetbe állítás" msgid "Reset to Filament Color" -msgstr "Filament színének visszaállítása" +msgstr "Szál színének visszaállítása" msgid "Restart application" msgstr "Alkalmazás újraindítása" @@ -6288,6 +9023,9 @@ msgstr "Alkalmazás újraindítása" msgid "Restore window position on start" msgstr "Ablak pozíciójának visszaállítása indításkor" +msgid "Retr." +msgstr "Retr." + msgid "Retract amount before wipe" msgstr "Visszahúzott mennyiség törlés előtt" @@ -6297,19 +9035,24 @@ msgstr "Visszahúzás rétegváltáskor" msgid "Retraction" msgstr "Visszahúzás" +msgid "Retraction calibration" +msgstr "Visszahúzási kalibráció" + msgid "" "Retraction is not triggered when travel moves are shorter than this length." -msgstr "" -"A visszahúzás nem lép működésbe, ha az utazási mozgás hossza ennél rövidebb." +msgstr "A behúzás nem lép működésbe, ha a mozgások hossza ennél rövidebb." msgid "Retraction Length" -msgstr "Visszahúzás hossza" +msgstr "Visszahúzási hossz" + +msgid "Retraction length" +msgstr "Visszahúzási hossz" msgid "Retraction Length (Toolchange)" -msgstr "Visszahúzás Hossza (Szerszámváltás)" +msgstr "Visszahúzási hossz (szerszámcsere)" msgid "Retraction Speed" -msgstr "Visszahúzási Sebesség" +msgstr "Visszahúzási sebesség" msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)" msgstr "" @@ -6320,34 +9063,39 @@ msgid "Retractions" msgstr "Visszahúzások" msgid "Reverse direction of zoom with mouse wheel" -msgstr "Az egérgörgő zoom irányának megfordítása" +msgstr "A zoom irányának megfordítása az egérkerékkel" + +msgid "Reverse on odd" +msgstr "Páratlan fordítottja" + +msgid "Reverse threshold" +msgstr "Fordított küszöb" msgid "Revert color to default" msgstr "Szín visszaállítása az alapértelmezettre" msgid "Revert conversion from imperial units" -msgstr "Konvertálás visszavonása (angolszász mértékegységről)" +msgstr "Átváltás visszafordítása a brit mértékegységekből" msgid "Revert conversion from meters" msgstr "Konvertálás visszavonása (metrikus mértékegységről)" msgid "Review the substitutions and adjust them if needed." -msgstr "Ellenőrizze a helyettesítéseket, és szükség esetén módosítsa azokat." +msgstr "Tekintse át a helyettesítéseket, és szükség esetén módosítsa azokat." msgid "Right" msgstr "Jobb" msgid "Right button click the icon to change the object printable property" msgstr "" -"Kattintson jobb gombbal az ikonra az objektum nyomtatható tulajdonságának " -"módosításához" +"Jobb klikk az ikonra az objektum nyomtatható tulajdonságának " +"megváltoztatásához" msgid "Right button click the icon to change the object settings" -msgstr "Kattintson jobb gombbal az ikonra az objektumbeálltások módosításához" +msgstr "Jobb klikk az ikonra az objektum beállításainak módosításához" msgid "Right button click the icon to fix STL through Netfabb" -msgstr "" -"Kkattintson jobb gombbal az ikonra az STL Netfabb-on történő javításhoz" +msgstr "Jobb klikk az ikonra az STL javításához a Netfabbon keresztül" msgid "Right click" msgstr "Jobb klikk" @@ -6358,11 +9106,14 @@ msgstr "Jobb egérgomb" msgid "Right mouse button:" msgstr "Jobb egérgomb:" +msgid "Right panel" +msgstr "Jobb oldali panel" + msgid "Right Preset Value" msgstr "Jobb Előbeállítás Értéke" msgid "Right View" -msgstr "Jobbnézet" +msgstr "Jobbról nézet" msgid "Rotate" msgstr "Forgatás" @@ -6374,45 +9125,57 @@ msgid "Rotate around Y" msgstr "Forgatás Y körül" msgid "Rotate lower part upwards" -msgstr "Az alsó rész felfelé forgatása" +msgstr "Forgassa az alsó részt felfelé" msgid "Rotate selection 45 degrees CCW" -msgstr "Kijelölés elfordítása 45 fokkal óramutató járásával ellentétesen" +msgstr "A kiválasztás elforgatása 45 fokkal CCW" msgid "Rotate selection 45 degrees CW" -msgstr "Kijelölés elfordítása 45 fokkal óramutató járásával megegyezően" +msgstr "A kiválasztás elforgatása 45 fokkal CW" msgid "Rotate the model to have the lowest z height for faster print time." msgstr "" "Forgassa úgy a modellt, hogy a Z magasság a legkisebb legyen, a rövidebb " "nyomtatási idő érdekében." +msgid "Rotate the polyhole every layer." +msgstr "Forgassa el a polihole-t minden rétegben." + msgid "Rotation" msgstr "Forgatás" msgid "Rotation angle around the X axis in degrees." -msgstr "Az X tengely körüli forgatási szög fokban." +msgstr "Az X tengely körüli elforgatási szög fokban." msgid "Rotation angle around the Y axis in degrees." -msgstr "Az Y tengely körüli forgatási szög fokban." +msgstr "Az Y tengely körüli elforgatási szög fokban." msgid "Rotation angle around the Z axis in degrees." -msgstr "Az Z tengely körüli forgatási szög fokban." +msgstr "A Z tengely körüli elforgatási szög fokban." + +msgid "Round corners" +msgstr "Lekerekített sarkok" + +msgid "Round corners for perimeters" +msgstr "Lekerekített sarkok a kerületekhez" + +msgid "Roundness margin" +msgstr "Kerekítési különbözet" msgid "Ruler mode" msgstr "Vonalzó mód" msgid "Run %s" -msgstr "%s Fut_" +msgstr "Fut %s" msgid "Running post-processing scripts" msgstr "Utófeldolgozó szkriptek futtatása" msgid "S&end G-code" -msgstr "G-kód Küldése" +msgstr "G&-kód küldése" msgid "S&end to print" -msgstr "Nyomtatásra küldés" +msgstr "N&yomtatásra küldés" msgid "Same as top" msgstr "Megegyezik a felsővel" @@ -6421,60 +9184,59 @@ msgid "Save" msgstr "Mentés" msgid "Save %s as:" -msgstr "Mentés mint %s:" +msgstr "Mentés %s mint:" msgid "Save %s file as:" -msgstr "%s fájl mentése másként:" +msgstr "%s fájl mentése mint:" msgid "Save config file" -msgstr "Konfigurációs fájl mentése" +msgstr "Konfig fájl mentése" msgid "Save configuration as:" -msgstr "Konfiguráció mentése a következőként:" +msgstr "Konfiguráció mentése mint:" msgid "Save configuration to the specified file." -msgstr "A konfiguráció mentése a megadott fájlba." +msgstr "Konfiguráció mentése megadott fájlba." msgid "Save current %s" -msgstr "Aktuális %s mentése" +msgstr "Jelenlegi %s mentése" msgid "Save current project file" -msgstr "Aktuális projekt fájl mentése" +msgstr "Aktuális projektfájl mentése" msgid "Save current project file as" -msgstr "Aktuális projekt fájl mentése másként" +msgstr "Aktuális projektfájl mentése" msgid "Save file as:" msgstr "Fájl mentése mint:" msgid "Save G-code file as:" -msgstr "G-kód fájl mentése másként:" +msgstr "G-kód fájl mentése:" msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "" -"OBJ fájl mentése (kevésbé hajlamos a koordinációs hibákra, mint az STL) a " -"másként:" +"Az OBJ fájl mentése (kevésbé hajlamos a koordinátahibákra, mint az STL):" msgid "Save preset" msgstr "Előbeállítás mentése" msgid "Save presets bundle as:" -msgstr "Előbeállítási csomag mentése a következőként:" +msgstr "Előbeállítások mentése:" msgid "Save project" msgstr "Projekt mentése" msgid "Save Project &as" -msgstr "Projekt mentése másként" +msgstr "Projekt mentése &mint" msgid "Save project (3mf)" msgstr "Projekt mentése (3mf)" msgid "Save project as (3mf)" -msgstr "Projekt mentése másként (3mf)" +msgstr "Projekt mentése mint (3mf)" msgid "Save SL1 / SL1S file as:" -msgstr "SL1 / SL1S fájl mentése másként:" +msgstr "SL1 / SL1S fájl mentése:" msgid "Save support points?" msgstr "Támasztópontok mentése?" @@ -6483,60 +9245,92 @@ msgid "Save the selected options to preset \"%1%\"." msgstr "A kiválasztott beállítások mentése a \"%1%\" előbeállításba." msgid "Save the selected options." -msgstr "A kiválasztott beállítások mentése." +msgstr "A kiválasztott opciók mentése." msgid "Save zip file as:" -msgstr "Zip fájl mentése másként:" +msgstr "Zip-fájl mentése:" msgid "Saving mesh into the 3MF container failed." msgstr "A háló mentése a 3MF konténerbe nem sikerült." +msgid "Sawtooth" +msgstr "Fűrészfog" + msgid "Scale" -msgstr "Skálázás" +msgstr "Skála" msgid "Scale factors" -msgstr "Skálázási tényezők" +msgstr "Mérettényezők" msgid "Scale To Fit" -msgstr "Skálázás mérethez igazítva" +msgstr "Méretre igazítás" msgid "Scale to Fit" -msgstr "Skálázás Mérethez Igazítva" +msgstr "Méretre igazít" msgid "Scale to fit the given volume." -msgstr "A megadott térfogatra való skálázás." +msgstr "A megadott térfogatra való méretezés." msgid "Scaling factor or percentage." msgstr "Skálázási tényező vagy százalék." +msgid "Scattered Rectilinear" +msgstr "Elszórt egyenes vonalú" + msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" -"Feltöltés ütemezése ide: „%1%”. Lásd: Ablak -> Nyomtató-feltöltési " +"Feltöltés ütemezése ide: `%1%`. Lásd: Ablak -> Nyomtató-feltöltési " "várakozási sor" +msgid "Script help page" +msgstr "Szkript súgó oldal" + +msgid "Seam angle cost" +msgstr "Varrásszög költsége" + +msgid "Seam gap" +msgstr "Varrás hézag" + msgid "Seam painting" -msgstr "Varrat festés" +msgstr "Varrás festés" + +msgid "Seam Position" +msgstr "Varrás pozíciója" msgid "Seam position" -msgstr "Varrat pozíció" +msgstr "Varrás helyzete" msgid "Seam preferred direction" -msgstr "A varrat preferált iránya" +msgstr "A varrás előnyben részesített iránya" msgid "Seam preferred direction jitter" -msgstr "Varrat preferált iránya jitter" +msgstr "A varrat előnyben részesített iránya remegés" + +msgid "Seam travel cost" +msgstr "Varrás utazási költsége" msgid "Seams" msgstr "Varratok" msgid "Searc&h" -msgstr "Keresés" +msgstr "Keresé&s" msgid "Search" msgstr "Keresés" +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" +"Keressen olyan majdnem kör alakú lyukakat, amelyek egynél több rétegen " +"átívelnek, és alakítsa át a geometriát polilyukakká. A fúvókaméret és a " +"(legnagyobb) átmérő segítségével számítsa ki a polilyukakat.\n" +"Lásd http://hydraraptor.blogspot.com/2011/02/polyholes.html" + msgid "Search in English" -msgstr "Keresés Angolul" +msgstr "Keressen angolul" msgid "Search in settings" msgstr "Keresés a beállításokban" @@ -6548,73 +9342,144 @@ msgid "Searching for devices" msgstr "Eszközök keresése" msgid "Searching for optimal orientation" -msgstr "Az optimális tájolás keresése" +msgstr "Optimális tájolás keresése" msgid "See Download page." msgstr "Tekintse meg a Letöltési oldalt." msgid "See more." -msgstr "Továbbiak megjelenítése." +msgstr "Lásd még." msgid "See Releases page." -msgstr "Tekintse meg a kiadások oldalt." +msgstr "Lásd a Kiadványok oldalt." + +msgid "Select 3d editor Tab" +msgstr "Válasszon 3d editor lapot" msgid "Select a file" msgstr "Válasszon egy fájlt" msgid "Select a gcode file:" -msgstr "Válasszon egy gcode fájlt:" +msgstr "Válasszon ki egy gcode fájlt:" + +msgid "" +"Select a goal, this will change settings to increase the effects to search." +msgstr "" +"Válasszon ki egy célt, ez megváltoztatja a beállításokat, hogy növelje a " +"keresési hatásokat." msgid "Select all objects" -msgstr "Összes objektum kijelölése" +msgstr "Minden objektum kijelölése" msgid "Select all points" -msgstr "Összes pont kijelölése" +msgstr "Minden pont kijelölése" + +msgid "Select all standard printers in this page" +msgstr "Válassza ki az összes szabványos nyomtatót az oldalon" msgid "Select an action to apply to the file" msgstr "Válassza ki a fájlra alkalmazandó műveletet" msgid "Select by rectangle" -msgstr "Kijelölés téglalappal" +msgstr "Téglalap szerinti kijelölés" msgid "Select configuration to load:" -msgstr "A Betöltendő konfiguráció kiválasztása:" +msgstr "Válassza ki a betöltendő konfigurációt:" msgid "Select coordinate space, in which the transformation will be performed." msgstr "" -"Válassza ki azt a koordináta rendszert, amelyben a transzformáció " -"végrehajtását szeretné." +"Válassza ki azt a koordináta-térséget, amelyben a transzformáció " +"végrehajtásra kerül." msgid "Select Filament Settings Tab" -msgstr "Filament Beállítások Fül Kiválasztása" +msgstr "Válassza a Szálbeállítások lapot" + +msgid "Select Gcode preview Tab" +msgstr "Válassza ki a Gcode előnézet lapot" + +msgid "Select Layer Preview Tab" +msgstr "Rétegelőnézet lap kiválasztása" msgid "Select presets to compare" msgstr "Előbeállítások kiválasztása az összehasonlításhoz" msgid "Select Print Settings Tab" -msgstr "Nyomtatási Beállítások Fül Kiválasztása" +msgstr "Válassza a Nyomtatási beállítások lapot" msgid "Select Printer Settings Tab" -msgstr "Nyomtató Beállítások Fül Kiválasztása" +msgstr "Válassza ki a Nyomtató beállításai lapot" msgid "Select the language" -msgstr "Válassza ki a nyelvet" +msgstr "Nyelv kiválasztása" msgid "Select the new file" msgstr "Válassza ki az új fájlt" +msgid "Select the number milimeters for the tower." +msgstr "Válassza ki a torony milimétereinek számát." + +msgid "Select the number of tests" +msgstr "Válassza ki a tesztek számát" + +msgid "" +"Select the number of tests with higher temperature than the current one." +msgstr "Válassza ki az aktuálisnál magasabb hőmérsékletű tesztek számát." + +msgid "Select the number of tests with lower temperature than the current one." +msgstr "Válassza ki az aktuálisnál alacsonyabb hőmérsékletű tesztek számát." + +msgid "" +"Select the number tower to print, and by how many degrees C to decrease each " +"time." +msgstr "" +"Válassza ki a nyomtatandó számtornyot, és azt, hogy hány C-fokkal csökkenjen " +"minden alkalommal." + +msgid "Select the output format for this printer." +msgstr "Válassza ki a nyomtató kimeneti formátumát." + msgid "Select the print profiles this profile is compatible with." -msgstr "Válassza ki az ezzel a profillal kompatibilis nyomtatási profilokat." +msgstr "" +"Válassza ki azokat a nyomtatási profilokat, amelyekkel ez a profil " +"kompatibilis." msgid "Select the printers this profile is compatible with." -msgstr "Válassza ki az ezzel a profillal kompatibilis nyomtatókat." +msgstr "Válassza ki azokat a nyomtatókat, amelyekkel ez a profil kompatibilis." + +msgid "" +"Select the step in % between two tests.\n" +"Note that only multiple of 5 are engraved on the parts." +msgstr "" +"Válassza ki a két vizsgálat közötti %-os lépést.\n" +"Vegye figyelembe, hogy csak az 5 többszörösét vésik az alkatrészekre." + +msgid "" +"Select the step in celcius between two tests.\n" +"Note that only multiple of 5 are engraved on the part." +msgstr "" +"Válassza ki a két vizsgálat közötti lépést Celsiusban.\n" +"Vegye figyelembe, hogy csak az 5 többszörösét vésik az alkatrészbe." msgid "Select the STL file to repair:" msgstr "Válassza ki a javítandó STL fájlt:" -msgid "Select toolbar icon size in respect to the default one." +msgid "" +"Select this option to enforce z-lift on the first layer.\n" +"Useful to still use the lift on the first layer even if the 'Only lift Z " +"below' (retract_lift_above) is higher than 0." +msgstr "" +"Válassza ezt az opciót, ha a Z-emelést az első rétegre kívánja " +"kényszeríteni.\n" +"Hasznos, ha az első rétegen akkor is használjuk az emelést, ha a 'Csak alsó " +"Z emelés' (retract_lift_above) értéke 0-nál nagyobb." + +msgid "Select this option to not use/enforce the z-lift on a top surface." msgstr "" -"Válassza ki az eszköztár ikonjainak méretét az alapértelmezetthez képest." +"Válassza ezt az opciót, ha nem kívánja használni/megerősíteni a Z-emelést a " +"felső felületen." + +msgid "Select toolbar icon size in respect to the default one." +msgstr "Az eszköztár ikonméretének kiválasztása az alapértelmezetthez képest." msgid "Select type of part" msgstr "Válassza ki az alkatrész típusát" @@ -6625,69 +9490,70 @@ msgid "" "or CANCEL to leave it unchanged." msgstr "" "Válassza az IGEN lehetőséget, ha törölni kívánja az összes mentett " -"eszközváltást, \n" -"NEM, ha azt szeretné, hogy az összes szerszámváltás színváltásra váltson, \n" -"vagy a VISSZAVONÁS lehetőséget, ha változatlanul szeretné hagyni." +"eszközváltoztatást, \n" +"NEM, ha azt szeretné, hogy az összes szerszámváltoztatás színváltoztatásra " +"váltson, \n" +"vagy a CANCEL lehetőséget, ha változatlanul szeretné hagyni." msgid "Selection-Add" -msgstr "Kiválasztás - Hozzáadás" +msgstr "Kiválasztás-Hozzáadása" msgid "Selection-Add All" -msgstr "Kiválasztás - Összes hozzáadása" +msgstr "Kijelölés-Összes hozzáadása" msgid "Selection-Add from list" -msgstr "Kijelölés - hozzáadás listából" +msgstr "Kiválasztás-Hozzáadás a listához" msgid "Selection-Add from rectangle" -msgstr "Kijelölés – Hozzáadás a téglalaphoz" +msgstr "Kiválasztás-Hozzáadás téglalapból" msgid "Selection-Add Instance" -msgstr "Kiválasztás - Példány hozzáadása" +msgstr "Kiválasztás-Példány hozzáadása" msgid "Selection-Add Object" -msgstr "Kiválasztás - Objektum hozzáadása" +msgstr "Kiválasztás-Objektum hozzáadása" msgid "Selection-Remove" -msgstr "Kiválasztás - Törlés" +msgstr "Kiválasztás-Eltávolítása" msgid "Selection-Remove All" -msgstr "Kiválasztás - Összes törlése" +msgstr "Kijelölés-Összes törlése" msgid "Selection-Remove from list" -msgstr "Kijelölés - törlés listából" +msgstr "Kiválasztás-Törlés a listáról" msgid "Selection-Remove from rectangle" -msgstr "Kijelölés – Eltávolítás a téglalapból" +msgstr "Kiválasztás-Eltávolítás a téglalapból" msgid "Selection-Remove Instance" -msgstr "Kiválasztás - Példány törlése" +msgstr "Kiválasztás-Példány törlése" msgid "Selection-Remove Object" -msgstr "Kiválasztás - Objektum törlése" +msgstr "Kiválasztás-Objektum törlése" msgid "Selects all objects" -msgstr "Az összes objektum kijelölése" +msgstr "Minden objektum kiválasztása" msgid "Send G-code" msgstr "G-kód küldése" msgid "Send G-Code to printer host" -msgstr "G-kód küldése a nyomtató gazdagépének" +msgstr "G-kód küldése a nyomtató gazdagépnek" msgid "Send to print current plate as G-code" -msgstr "Az aktuális tárgyasztal küldése nyomtatóra G-kódként" +msgstr "Küldés az aktuális tálca nyomtatásához G-kódként" msgid "Send to printer" -msgstr "Küldés nyomtatóra" +msgstr "Nyomtatóra küldés" msgid "Seq." -msgstr "Seq." +msgstr "Sorozat." msgid "Sequential printing" msgstr "Szekvenciális nyomtatás" msgid "Sequential slider applied only to top layer" -msgstr "Szekvenciális csúszka csak a legfelső rétegre alkalmazva" +msgstr "Csak a legfelső rétegre alkalmazott szekvenciális csúszka" msgid "Serial port:" msgstr "Soros port:" @@ -6696,7 +9562,7 @@ msgid "Service name" msgstr "Szolgáltatás neve" msgid "Set" -msgstr "Beállítás" +msgstr "Beállít" msgid "Set auto color changes" msgstr "Automatikus színváltás beállítása" @@ -6705,55 +9571,55 @@ msgid "Set default extruder for the selected items" msgstr "Alapértelmezett extruder beállítása a kiválasztott elemekhez" msgid "Set extruder change for every" -msgstr "Extruder sorrend beállítás az összesre" +msgstr "Minden extruder váltás beállítása" msgid "Set extruder number for the selected items" msgstr "Extruder számának beállítása a kiválasztott elemekhez" msgid "Set extruder sequence" -msgstr "Extruder sorrend beállítás" +msgstr "Extruder sorrend beállítása" msgid "Set extruder sequence for the entire print" msgstr "Extruder sorrend beállítása a teljes nyomtatáshoz" msgid "Set extruder(tool) sequence" -msgstr "Extruder (szerszám) sorrend beállítása" +msgstr "Extruder(szerszám) sorrend beállítása" msgid "Set left thumb as active" -msgstr "Bal jelölő beállítása aktívként" +msgstr "Bal hüvelykujj aktívnak állítása" msgid "Set lower thumb as active" -msgstr "Alsó jelölő aktiválása" +msgstr "Alsó hüvelykujj aktívként való beállítása" msgid "Set Mirror" msgstr "Tükrözés beállítása" msgid "Set numbers of copies to %d" -msgstr "A másolatok számának beállítása erre: %d" +msgstr "A másolatok számának beállítása %d-ra" msgid "Set Orientation" -msgstr "Tájolás Beállítása" +msgstr "Orientáció beállítása" msgid "Set Position" -msgstr "Helyzet Beállítása" +msgstr "Pozíció beállítása" msgid "Set Printable" -msgstr "Beálltás nyomtathatónak" +msgstr "Nyomtathatóság beállítása" msgid "Set Printable group" msgstr "Csoport beállítása nyomtathatónak" msgid "Set Printable Instance" -msgstr "Példány beállítása nyomtathatónak" +msgstr "Nyomtatható példány beállítása" msgid "Set right thumb as active" -msgstr "Jobb jelölő beállítása aktívként" +msgstr "Jobb hüvelykujj aktívnak állítása" msgid "Set ruler mode" msgstr "Vonalzó mód beállítása" msgid "Set Scale" -msgstr "Skálázás Beállítása" +msgstr "Skála beállítása" msgid "Set selected items as Printable/Unprintable" msgstr "A kiválasztott elemek beállítása nyomtatható/nem nyomtathatóként" @@ -6766,18 +9632,181 @@ msgid "" "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" -"Állítsa be az LCD-kijelző tényleges tájolását az SLA nyomtatóban. A portré " +"Állítsa be az aktuális LCD-kijelző tájolását az SLA nyomtatóban. A portré " "mód megfordítja a kijelző szélességi és magassági paramétereinek jelentését, " "és a kimeneti képek 90 fokkal el lesznek forgatva." +msgid "" +"Set the new lift-z value for this override. 0 will disable the z-lift. -& to " +"disable. May only work on Height range modifiers." +msgstr "" +"Állítsa be az új lift-z értéket ehhez a felülbíráláshoz. A 0 kikapcsolja a z-" +"emelést. -& a letiltáshoz. Csak a Height range módosítókon működhet." + msgid "Set the shape of your printer's bed." -msgstr "Állítsa be a nyomtató tárgyasztalának alakját." +msgstr "Állítsa be a nyomtató ágyának alakját." + +msgid "" +"Set this if your printer uses control values from 0-100 instead of 0-255." +msgstr "" +"Ezt akkor állítsa be, ha a nyomtató 0-255 helyett 0-100 közötti értékeket " +"használ." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.05 x nozzle diameter will be used. If expressed as percentage " +"(for example 112.5%), it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Állítsa ezt a nullától eltérő értékre a külső kerületek kézi kihúzási " +"szélességének beállításához. Ha nulla marad, akkor az alapértelmezett " +"extrudálási szélesség kerül felhasználásra, ha be van állítva, ellenkező " +"esetben 1,05 x fúvókaátmérő lesz használatos. Ha százalékban fejezik ki " +"(például 112,5%), akkor a fúvóka átmérője alapján számítják ki.\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása a " +"kerületi 'Átfedés' százalékos és az alapértelmezett rétegmagasság " +"felhasználásával történik." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 140%) it will be computed over the " +"nozzle diameter of the nozzle used for the type of extrusion. If set to " +"zero, it will use the default extrusion width.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Az első réteg kézi extrudálási szélességének beállításához állítsa be ezt a " +"nem nulla értékre. Ezzel vastagabb extrudátumokat kényszeríthet a jobb " +"tapadás érdekében. Ha százalékban van megadva (például 140%), akkor az " +"értéket az extrudálás típusához használt fúvóka fúvókaátmérőjére kell " +"számítani. Ha nullára van állítva, akkor az alapértelmezett extrudálási " +"szélességet használja.\n" +"Beállíthatja a 'Spacing' (Távolság) vagy a 'Width' (Szélesség) értéket; a " +"másik értéket a perem 'Overlap' (Átfedés) százalékos értékei és az " +"alapértelmezett rétegmagasság alapján számítja ki." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left as zero, default extrusion width will be used if " +"set, otherwise 1.125 x nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Állítsa be ezt nem nulla értékre, ha kézi extrudálási szélességet szeretne " +"beállítani a tömör felületek kitöltéséhez. Ha nulla értéken hagyja, akkor az " +"alapértelmezett extrudálási szélesség kerül alkalmazásra, ha be van állítva, " +"ellenkező esetben 1,125 x fúvókaátmérő lesz használva. Ha százalékban van " +"megadva (például 110%), akkor a fúvóka átmérője alapján kerül kiszámításra.\n" +"A 'Távolság' vagy a 'Szélesség:' értéket is megadhatja; a másik értéket az " +"alapértelmezett rétegmagasság felhasználásával számítja ki a rendszer." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left as zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Állítsa be ezt a nem nulla értékre, ha a felső felületek kitöltéséhez kézi " +"extrudálási szélességet szeretne beállítani. Érdemes vékonyabb " +"extrudátumokat használni, hogy minden keskeny területet kitöltsön, és simább " +"felületet kapjon. Ha nulla értéken hagyja, akkor az alapértelmezett " +"extrudálási szélességet fogja használni, ha be van állítva, ellenkező " +"esetben a fúvóka átmérőjét fogja használni. Ha százalékban van megadva (pl. " +"110%), akkor a fúvókaátmérőre lesz kiszámítva.\n" +"A 'Spacing' (távolság) vagy a 'Width' (szélesség) beállítható; a másik " +"értéket az alapértelmezett rétegmagasság felhasználásával számítja ki a " +"rendszer." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left as zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Állítsa ezt a nullától eltérő értékre a kitöltés kézi kihúzási szélességének " +"beállításához. Ha nulla marad, akkor az alapértelmezett extrudálási " +"szélesség kerül felhasználásra, ha be van állítva, ellenkező esetben 1,125 x " +"fúvókaátmérő lesz használatos. Érdemes zsírosabb extrudátumokat használni, " +"hogy felgyorsítsa a feltöltést és erősebbé tegye az alkatrészeket. Ha " +"százalékban fejezik ki (például 110%), akkor a fúvóka átmérője alapján " +"számítják ki.\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása az " +"alapértelmezett rétegmagasság használatával történik." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 105%) " +"it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Állítsa be ezt nem nulla értékre, ha a peremek manuális extrudálási " +"szélességét szeretné beállítani. A pontosabb felületek elérése érdekében " +"érdemes vékonyabb extrudátumokat használni. Ha nulla értéken hagyja, akkor " +"az alapértelmezett extrudálási szélességet fogja használni, ha be van " +"állítva, ellenkező esetben 1,125x fúvókaátmérő lesz használva. Ha " +"százalékban van megadva (pl. 105%), akkor a fúvókaátmérőre lesz kiszámítva.\n" +"A 'Távolság' vagy a 'Szélesség' beállítható; a másik értéket a perem " +"'Átfedés' százalékos értékei és az alapértelmezett rétegmagasság alapján " +"számítja ki a rendszer." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left as zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter." +msgstr "" +"Állítsa ezt a nullától eltérő értékre a hordozóanyag kézi extrudálási " +"szélességének beállításához. Ha nulla marad, akkor az alapértelmezett " +"extrudálási szélesség kerül felhasználásra, ha be van állítva, ellenkező " +"esetben a fúvóka átmérője lesz használatos. Ha százalékban adja meg (például " +"110%), akkor a fúvóka átmérője alapján lesz számolva." + +msgid "" +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the platter.\n" +"Set zero to disable clearance checking." +msgstr "" +"Állítsa ezt az extruder körüli távolságra. Ha az extruder nincs középre " +"állítva, a biztonság érdekében válassza a legnagyobb értéket. Ez a beállítás " +"az ütközések ellenőrzésére és a grafikus előnézet megjelenítésére szolgál a " +"tányéron.\n" +"Állítsa nullára a távolságellenőrzés letiltásához." + +msgid "" +"Set this to the height moved when your Z motor (or equivalent) turns one " +"step.If your motor needs 200 steps to move your head/platter by 1mm, this " +"field should be 1/200 = 0.005.\n" +"Note that the gcode will write the z values with 6 digits after the dot if " +"z_step is set (it's 3 digits if it's disabled).\n" +"Set zero to disable." +msgstr "" +"Állítsa be ezt a magasságot, amelyet a Z-motor (vagy azzal egyenértékű " +"motor) egy lépéssel történő fordulatakor mozgat.Ha a motornak 200 lépésre " +"van szüksége a fej/lemez 1 mm-es mozgatásához, akkor ennek a mezőnek 1/200 = " +"0,005-nek kell lennie.\n" +"Vegye figyelembe, hogy a gcode a z értékeket a pont után 6 számjeggyel írja " +"ki, ha a z_step be van állítva (3 számjegyű, ha ki van kapcsolva).\n" +"A letiltáshoz állítson be nullát." msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" -"Állítsa ezt a maximális magasságra, amelyet az extruder nyomtatás közben " +"Állítsa be ezt a maximális magasságot, amelyet az extruder nyomtatás közben " "elérhet." msgid "" @@ -6786,56 +9815,75 @@ msgid "" "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" -"Állítsa be ezt az értéket a fúvókacsúcs és (általában) az X kocsirudak " -"közötti függőleges távolságra. Más szóval, ez az extruder körüli védőhenger " -"magassága, és ez jelenti azt a maximális mélységet, amelyre az extruder még " -"le tud süllyedni, mielőtt a már kinyomtatott objektumokkal ütközne." +"Állítsa be ezt a fúvókacsúcs és (általában) az X kocsirudak közötti " +"függőleges távolságra. Más szóval, ez az extruder körüli távolsági henger " +"magassága, és ez jelenti azt a maximális mélységet, amelyet az extruder meg " +"tud nézni, mielőtt más nyomtatott objektumokkal ütközne." msgid "Set Unprintable" -msgstr "Beálltás nem nyomtathatónak" +msgstr "Nyomtathatatlanság beállítása" msgid "Set Unprintable group" msgstr "Csoport beállítása nem nyomtathatónak" msgid "Set Unprintable Instance" -msgstr "Példány beállítása nem nyomtathatónak" +msgstr "Nyomtathatatlan példány beállítása" msgid "Set upper thumb as active" -msgstr "Felső jelölő aktiválása" +msgstr "Felső hüvelykujj aktívként való beállítása" msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" -"Naplózási érzékenység beállítása. 0: végzetes, 1: hiba, 2: figyelmeztetés, " -"3: információ, 4: hibakeresés, 5: nyomkövetés.\n" -"Például: loglevel=2 a végzetes, hiba és figyelmeztetés szintű üzeneteket " -"naplózza." +"Naplózási érzékenység beállítása. 0:fatal, 1:error, 2:warning, 3:info, 4:" +"debug, 5:trace\n" +"Például: loglevel=2 a fatal, error és warning szintű üzeneteket naplózza." msgid "Settings" msgstr "Beállítások" +msgid "" +"Settings button: all windows are in the application, no tabs: you have to " +"clic on settings gears to switch to settings tabs." +msgstr "" +"Beállítások gomb: minden ablak az alkalmazásban van, nincsenek fülek: a " +"beállítások fogaskerekére kell kattintania, hogy a beállítások fülekre " +"váltson." + msgid "Settings for height range" -msgstr "Magasságtartomány beállítások" +msgstr "A magassági tartomány beállításai" msgid "Settings in non-modal window" -msgstr "Beálltások külön ablakban" +msgstr "Beállítások a nem modális ablakban" + +msgid "" +"Settings window: settings are displayed in their own window. You have to " +"clic on settings gears to show the settings window." +msgstr "" +"Beállítások ablak: a beállítások saját ablakban jelennek meg. A beállítások " +"ablakának megjelenítéséhez a beállítások fogaskerekére kell kattintania." msgid "Shall I adjust those settings for supports?" -msgstr "Módosítsam ezeket a beállításokat a támaszokhoz?" +msgstr "Módosítsam ezeket a beállításokat az alátámasztásoknak?" msgid "Shall I adjust those settings in order to enable Spiral Vase?" -msgstr "Módosítsam ezeket a beállításokat a Spirálváza engedélyezéséhez?" +msgstr "Módosítsam ezeket a beállításokat a Spirális váza engedélyezéséhez?" msgid "Shall I adjust those settings in order to enable the Wipe Tower?" -msgstr "Módosítsam ezeket a beállításokat a törlőtorony engedélyezéséhez?" +msgstr "Módosítsam ezeket a beállításokat, hogy engedélyezzem a Törlőtornyot?" + +msgid "Shall I switch the brim offset to 0?" +msgstr "Állítsam a peremeltolást 0-ra?" msgid "Shall I switch to rectilinear fill pattern?" msgstr "Váltsak egyenes vonalú kitöltési mintára?" msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" -msgstr "Szinkronizáljam a támasz rétegeket a Törlőtorony engedélyezéséhez?" +msgstr "" +"Szinkronizáljam az alátámasztási rétegeket, hogy engedélyezzem a " +"Törlőtornyot?" msgid "Shape" msgstr "Alakzat" @@ -6847,22 +9895,22 @@ msgid "Shells" msgstr "Héjak" msgid "Shift + Left mouse button" -msgstr "Shift + Bal egérgomb" +msgstr "SHIFT+Bal klikk" msgid "Shift + Left mouse button:" -msgstr "Shift + Bal egérgomb:" +msgstr "SHIFT+Bal egérgomb:" msgid "Shift + Right mouse button:" -msgstr "Shift + Jobb egérgomb:" +msgstr "SHIFT+Jobb egérgomb:" msgid "Shift objects to bed" msgstr "Tárgyak tárgyasztalba helyezése" msgid "Show" -msgstr "Megjelenítés" +msgstr "Mutat" msgid "Show &Configuration Folder" -msgstr "Konfigurációs Mappa Megjelenítése" +msgstr "&Konfigurációs mappa megjelenítése" msgid "Show &Labels" msgstr "Címkék Mutatása" @@ -6871,64 +9919,73 @@ msgid "Show \"Tip of the day\" notification after start" msgstr "A „Nap tippje” értesítés megjelenítése a program indításakor" msgid "Show about dialog" -msgstr "A Szerzőről szóló párbeszédpanel megnyitása" +msgstr "Mutasd a párbeszédpanelt" msgid "Show advanced settings" -msgstr "Haladó beállítások megjelenítése" +msgstr "Speciális beállítások megjelenítése" msgid "Show all presets (including incompatible)" msgstr "Minden előbeállítás megjelenítése (beleértve az inkompatibiliseket is)" msgid "Show drop project dialog" -msgstr "Húz és ejt párbeszédpanel megjelenítése" +msgstr "Cseppprojekt dialógusok megjelenítése" msgid "Show error message" -msgstr "Hibaüzenet megjelenítése" +msgstr "Hibajelzés megjelenítése" msgid "Show estimated print time" msgstr "Becsült nyomtatási idő megjelenítése" msgid "Show estimated print time on the ruler" -msgstr "Becsült nyomtatási idő megjelenítése a vonalzón" +msgstr "A becsült nyomtatási idő megjelenítése a vonalzón" msgid "Show incompatible print and filament presets" -msgstr "Nem kompatibilis nyomtatási és filament előbeállítások megjelenítése" +msgstr "Inkompatibilis nyomtatási és szálkészletek megjelenítése" msgid "Show keyboard shortcuts list" -msgstr "A billentyűparancsok listájának megjelenítése" +msgstr "Billentyűparancsok listájának megjelenítése" msgid "Show normal mode" -msgstr "Normál mód mutatása" +msgstr "Normál mód megjelenítése" msgid "Show object height" -msgstr "Objektum magasságának megjelenítése" +msgstr "Objektummagasság megjelenítése" msgid "Show object height on the ruler" msgstr "Objektum magasságának megjelenítése a vonalzón" msgid "Show object/instance labels in 3D scene" -msgstr "Objektum/példánycímkék megjelenítése 3D-s jelenetben" +msgstr "Objektum/példánycímkék megjelenítése a 3D jelenetben" + +msgid "Show overwrite dialog." +msgstr "Felülírási dialóguspanel megjelenítése." msgid "Show sidebar collapse/expand button" -msgstr "Az oldalsáv összecsukás/kibontás gombjának megjelenítése" +msgstr "Oldalsáv összecsukható/tágítható gomb megjelenítése" msgid "Show simplified settings" -msgstr "Egyszerű beállítások megjelenítése" +msgstr "Egyszerűsített beállítások megjelenítése" msgid "Show splash screen" -msgstr "Splash screen meglenítése" +msgstr "Kezdőképernyő megjelenítése" msgid "Show stealth mode" -msgstr "Lopakodó mód mutatása" +msgstr "Halk mód megjelenítése" msgid "Show supports" -msgstr "Támasztékok mutatása" +msgstr "Mutasd a támaszokat" msgid "Show system information" -msgstr "Rendszerinformáció mutatása" +msgstr "Rendszerinformációk megjelenítése" + +msgid "Show the bed texture on the thumbnail picture." +msgstr "Mutasd meg az ágy textúráját a miniatűr képen." + +msgid "Show the editor of the input models" +msgstr "A bemeneti modellek szerkesztőjének megjelenítése" msgid "Show the filament settings" -msgstr "Filament beállítások mutatása" +msgstr "Az izzószál beállítások megjelenítése" msgid "Show the full list of print/G-code configuration options." msgstr "" @@ -6936,25 +9993,34 @@ msgstr "" msgid "Show the full list of SLA print configuration options." msgstr "" -"Az SLA nyomtatási konfigurációs beállítások teljes listájának megjelenítése." +"Az SLA nyomtatási konfigurációs lehetőségek teljes listájának megjelenítése." + +msgid "Show the layers from the slicing process" +msgstr "A szeletelésből származó rétegek megjelenítése" msgid "Show the list of the keyboard shortcuts" msgstr "A billentyűparancsok listájának megjelenítése" +msgid "Show the preview of the gcode output" +msgstr "A G-kód kimenet előnézetének megjelenítése" + msgid "Show the print settings" -msgstr "Nyomtatási beállítások mutatása" +msgstr "A nyomtatási beállítások megjelenítése" msgid "Show the printer settings" -msgstr "Nyomtató beállítások mutatása" +msgstr "A nyomtató beállításainak megjelenítése" + +msgid "Show the supports (and pads) on the thumbnail picture." +msgstr "Mutassa meg a támaszokat (és a párnákat) a miniatűr képen." msgid "Show this help." -msgstr "Ennek a súgónak a megjelenítése." +msgstr "Mutasd a súgót." msgid "Show Tip of the Day" msgstr "Nap Tippje Mutatása" msgid "Show user configuration folder (datadir)" -msgstr "Konfigurációs Mappa Megjelenítése (datadir)" +msgstr "Felhasználói konfigurációs mappa megjelenítése (datadir)" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" @@ -6969,19 +10035,22 @@ msgid "Show/Hide G-code window" msgstr "G-kód ablak megjelenítése/elrejtése" msgid "Show/Hide Legend and Estimated printing time" -msgstr "Jelmagyarázat és becsült nyomtatási idő megjelenítése/elrejtése" +msgstr "Legenda és becsült nyomtatási idő megjelenítése/elrejtése" msgid "Show/Hide object/instance labels" -msgstr "Objektum/példánycímkék megjelenítése/elrejtése" +msgstr "Objektum/instance címkék megjelenítése/elrejtése" + +msgid "Shrinkage" +msgstr "Zsugorodás" msgid "Simple mode" msgstr "Egyszerű mód" msgid "Single extruder MM setup" -msgstr "Egy extruders MM beállítása" +msgstr "Egy extruder MM beállítása" msgid "Single Extruder Multi Material" -msgstr "Egyetlen Extruder Többféle Anyag" +msgstr "Egyetlen extruder több anyag" msgid "" "Single Extruder Multi Material is selected, \n" @@ -6989,15 +10058,16 @@ msgid "" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" -"Egyetlen Extruder Többféle Anyag van kiválasztva, \n" -"ezért minden extruder átmérőjének azonosnak kell lennie.\n" -"Szeretné az összes extruder fúvókaátmérőjét az első extruderéhez igazítani?" +"Egyetlen extruder többféle anyag kiválasztása, \n" +"és minden extruder átmérőjének azonosnak kell lennie.\n" +"Szeretné az összes extruder átmérőjét az első extruder fúvókaátmérő értékére " +"módosítani?" msgid "Single extruder multimaterial parameters" msgstr "Egyetlen extruder többanyagú paraméterei" msgid "Single instance mode" -msgstr "Egypéldányos mód" +msgstr "Egypéldányos üzemmód" msgid "Sinking" msgstr "Süllyedés" @@ -7011,68 +10081,79 @@ msgstr "Méret és koordináták" msgid "Size in X and Y of the rectangular plate." msgstr "A téglalap alakú lemez X és Y mérete." +msgid "Size of the tab icons, in pixels. Set to 0 to remove icons." +msgstr "A lap ikonok mérete pixelben. Az ikonok eltávolításához állítsa 0-ra." + +msgid "" +"Skinnydip performs a secondary dip into the meltzone to burn off fine " +"strings of filament" +msgstr "" +"A Skinnydip másodlagos merítést végez az olvadékzónába a finom szálak " +"leégetése érdekében" + msgid "Skirt" msgstr "Szoknya" msgid "Skirt and brim" msgstr "Szoknya és karima" +msgid "Skirt brim" +msgstr "Szoknya perem" + +msgid "Skirt distance from brim" +msgstr "Szoknyatávolság a peremtől" + msgid "Skirt height" -msgstr "Szoknya magasság" +msgstr "Szoknya magassága" msgid "Skirt Loops" -msgstr "Szoknya Hurkok" +msgstr "Szoknya hurkok" + +msgid "Skirt width" +msgstr "Szoknya szélessége" msgid "Skirt/Brim" msgstr "Szoknya/Karima" msgid "SLA gizmo keyboard shortcuts" -msgstr "SLA gizmo gyorsbillentyűk" +msgstr "SLA gizmo billentyűparancsok" msgid "SLA material" msgstr "SLA anyag" msgid "SLA Material Profiles Selection" -msgstr "SLA Alapanyag Profilok Kiválasztása" +msgstr "SLA anyagprofilok kiválasztása" msgid "SLA material type" -msgstr "SLA anyag típus" +msgstr "SLA anyagtípus" msgid "SLA materials" msgstr "SLA anyagok" msgid "SLA Materials" -msgstr "SLA Anyagok" +msgstr "SLA anyagok" msgid "SLA print" msgstr "SLA nyomtatás" msgid "SLA print material notes" -msgstr "SLA anyag megjegyzések" +msgstr "SLA nyomtatott anyag jegyzetek" msgid "SLA print settings" msgstr "SLA nyomtatási beállítások" msgid "SLA Support Points" -msgstr "SLA Támasztópontok" +msgstr "SLA támaszpontok" msgid "SLA supports outside the print area were detected." -msgstr "SLA támaszték található a nyomtatási területen kívül." - -msgid "" -"Slic3r can upload G-code files to a printer host. This field must contain " -"the kind of the host." -msgstr "" -"A Slic3r képes G-kód fájlokat feltölteni egy nyomtató-gazdára. Ennek a " -"mezőnek tartalmaznia kell a gazda típusát." +msgstr "A nyomtatási területen kívüli SLA-támaszok észlelve." msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" -"A Slic3r képes G-kód fájlokat feltölteni egy nyomtatógazdára. Ennek a " -"mezőnek tartalmaznia kell az API-kulcsot vagy a hitelesítéshez szükséges " -"jelszót." +"A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek " +"tartalmaznia kell az API-kulcsot vagy a hitelesítéshez szükséges jelszót." msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " @@ -7081,34 +10162,42 @@ msgid "" "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" -"A Slic3r képes G-kód fájlokat feltölteni egy nyomtatógazdára. Ennek a " -"mezőnek tartalmaznia kell a nyomtatógazda példányának gazdanevét, IP-címét " -"vagy URL-címét. A HAProxy mögött lévő nyomtatógazda alapszintű hozzáférés " -"engedélyezése esetén az URL-címbe a felhasználónév és a jelszó beírásával " -"érhető el a következő formátumban: https://username:password@your-octopi-" -"address/" +"A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek " +"tartalmaznia kell a gazdagép példányának hostnevét, IP-címét vagy URL-címét. " +"A HAProxy mögött lévő nyomtatógazda alapszintű auth engedélyezéssel érhető " +"el, ha a felhasználónevet és a jelszót a következő formátumban írja be az " +"URL-be: https://username:password@your-octopi-address/" + +msgid "Slic3r logo designed by Corey Daniels." +msgstr "A Slic3r logót Corey Daniels tervezte." + +msgid "Slic3r Manual" +msgstr "Slic3r kézikönyv" + +msgid "Slic3r will never scale the speed below this one." +msgstr "A Slic3r soha nem skálázza a sebességet ez alá." msgid "Slice" -msgstr "Szeletelés_" +msgstr "Szeletelés" msgid "Slice a file into a G-code" -msgstr "Fájl szeletelése G-kódba" +msgstr "Egy fájl G-kóddá szeletelése" msgid "Slice a file into a G-code, save as" -msgstr "Fájl szeletelése G-kódba, mentés másként" +msgstr "Szeleteljünk egy fájlt G-kóddá, mentsük másként" msgid "Slice gap closing radius" -msgstr "Szelet hézagzárási sugara" +msgstr "Szeletrés záró sugara" msgid "Slice now" -msgstr "Szeletelés most" +msgstr "Szeletelj most" msgid "Slice resolution" msgstr "Szelet felbontása" msgid "Slice the model and export SLA printing layers as PNG." msgstr "" -"Szeletelje fel a modellt és exportálja az SLA nyomtatási rétegeket PNG " +"Szeletelje a modellt és exportálja az SLA nyomtatási rétegeket PNG " "formátumban." msgid "Slice the model and export toolpaths as G-code." @@ -7118,16 +10207,19 @@ msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "" -"A modell szeletelése FFF-, vagy SLA-ként a printer_technology konfigurációs " -"érték alapján." +"A modell FFF vagy SLA szeletelése a printer_technology konfigurációs érték " +"alapján." msgid "Sliced Info" -msgstr "Szeletelt Info" +msgstr "Szeletelt infó" msgid "Sliced object \"%1%\" looks like a logo or a sign" msgstr "" "A \"%1%\" szeletelt objektum úgy néz ki, mint egy logó vagy egy felirat" +msgid "Sliced preview" +msgstr "Szeletelt előnézet" + msgid "Slicing" msgstr "Szeletelés" @@ -7138,37 +10230,39 @@ msgid "Slicing done" msgstr "Szeletelés kész" msgid "Slicing Done!" -msgstr "Szeletelés Kész!" +msgstr "Szeletelés kész!" msgid "Slicing finished." -msgstr "Szeletelés kész." +msgstr "A szeletelés befejeződött." msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" -"A szeletelést belső hiba miatt le kellett állítani: Inkonzisztens szelet " -"index." +"A szeletelést belső hiba miatt le kellett állítani: Inconsistent slice index." msgid "Slicing Mode" msgstr "Szeletelési mód" msgid "Slicing model" -msgstr "Modell szeletelése" +msgstr "Szeletelési modell" msgid "Slicing supports" -msgstr "Támasztók szeletelése" +msgstr "Szeletelés támogatás" msgid "Slow" msgstr "Lassú" msgid "Slow down if layer print time is below" -msgstr "Lassítson, ha a rétegnyomtatási idő a következő idő alatt van" +msgstr "Lassítson, ha a réteg nyomtatási ideje" msgid "Slow tilt" -msgstr "Lassú billentés" +msgstr "Lassú dőlés" + +msgid "Small perimeters speed" +msgstr "Kis kerületi sebesség" msgid "Small pillar diameter percent" -msgstr "Kis pillér átmérője százalék" +msgstr "Kis oszlop átmérő százalék" msgid "Smart fill" msgstr "Okos kitöltés" @@ -7189,7 +10283,7 @@ msgid "Snug" msgstr "Simulékony" msgid "Solid" -msgstr "Félkövér" +msgstr "Tömör" msgid "Solid " msgstr "Félkövér " @@ -7204,51 +10298,72 @@ msgid "Solid infill every" msgstr "Tömör kitöltés minden" msgid "Solid infill extruder" -msgstr "Tömör kitöltés extruder" +msgstr "Tömör kitöltő extruder" + +msgid "Solid infill spacing" +msgstr "Tömör kitöltési távolság" + +msgid "Solid infill speed" +msgstr "Tömör kitöltési sebesség" msgid "Solid infill threshold area" -msgstr "Tömör kitöltés küszöbérték" +msgstr "Tömör kitöltési küszöbterület" + +msgid "Solid infill width" +msgstr "Tömör kitöltés szélessége" msgid "Solid layers" msgstr "Tömör rétegek" +msgid "Solid spacing" +msgstr "Tömör távolság" + msgid "Soluble material" msgstr "Oldható anyag" msgid "Soluble material is most likely used for a soluble support." -msgstr "Az oldható anyagot általában oldható hordozóként használják." +msgstr "Az oldható anyagot valószínűleg oldható hordozónak használják." msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" -"Néhány mező túl hosszú ahhoz, hogy elférjen. A jobb egérgombbal történő " -"kattintással a teljes szöveg megjelenik." +"Egyes mezők túl hosszúak ahhoz, hogy elférjenek. A jobb egérgombbal " +"megjelenik a teljes szöveg." msgid "Some filaments were uninstalled." msgstr "Néhány filament eltávolításra került." +msgid "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." +msgstr "" +"Egyes G/M-kódú parancsok, köztük a hőmérséklet-szabályozás és mások, nem " +"univerzálisak. Állítsa be ezt az opciót a nyomtató firmware-ére a " +"kompatibilis kimenet érdekében. A \"No extrusion\" ízlés megakadályozza, " +"hogy a Slic3r egyáltalán exportáljon bármilyen extrudálási értéket." + msgid "Some objects are not visible during editing." msgstr "Egyes objektumok nem láthatók szerkesztés közben." msgid "Some objects are too close; your extruder will collide with them." -msgstr "" -"Néhány objektum túl közel van egymáshoz; az extruder ütközni fog velük." +msgstr "Néhány objektum túl közel van; az extruder ütközni fog velük." msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "" -"Néhány objektum túl magas, ezért nem nyomtathatók ki az extruder ütközése " -"nélkül." +"Egyes objektumok túl magasak, és nem nyomtathatók extruder-ütközések nélkül." msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" -"Egyes objektumok egyetlen nagy párna helyett néhány kisebb párnával is " -"beérik. Ez a paraméter határozza meg, hogy a két kisebb párna középpontja " -"milyen messze legyen egymástól. Ha ennél közelebb vannak egymáshoz, akkor " -"egy párnává olvadnak össze." +"Egyes tárgyak egyetlen nagy pad helyett néhány kisebb paddal is " +"elboldogulnak. Ez a paraméter határozza meg, hogy a két kisebb pad " +"középpontja milyen messze legyen egymástól. Ha közelebb vannak egymáshoz, " +"akkor egy paddá olvadnak össze." msgid "" "Some presets are modified and the unsaved changes will not be captured by " @@ -7269,7 +10384,7 @@ msgid "" "variable layer height. Enabled by default." msgstr "" "Egyes nyomtatók vagy nyomtatóbeállítások nehézségekbe ütközhetnek a változó " -"rétegmagasságú nyomtatásnál. Alapértelmezés szerint engedélyezett." +"rétegmagasságú nyomtatással. Alapértelmezés szerint engedélyezve." msgid "Some Printers were uninstalled." msgstr "Néhány nyomtató eltávolításra került." @@ -7278,15 +10393,24 @@ msgid "Some SLA materials were uninstalled." msgstr "Néhány SLA anyag eltávolításra került." msgid "Spacing" -msgstr "Térköz" +msgstr "Távolság" msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" -"Térköz az interfész vonalai között. HA nullára állítja, akkor összefüggő " -"interfészt kap." +"Az interfészvonalak közötti távolság. Ha nullát állítunk be, akkor egy tömör " +"felületet kapunk." + +msgid "Spacing between ironing lines" +msgstr "A vasalási vonalak közötti távolságtartás" msgid "Spacing between support material lines." -msgstr "Térköz a támaszanyag vonalai között." +msgstr "Távolság a támaszték vonalak között." + +msgid "Sparse" +msgstr "Ritka" + +msgid "Sparse infill speed" +msgstr "Ritkás kitöltési sebesség" msgid "Speed" msgstr "Sebesség" @@ -7294,6 +10418,9 @@ msgstr "Sebesség" msgid "Speed (mm/s)" msgstr "Sebesség (mm/s)" +msgid "Speed for milling tool." +msgstr "A marószerszám sebessége." + msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " @@ -7309,30 +10436,59 @@ msgstr "Sebesség nem nyomtatási mozgásokhoz" msgid "Speed for print moves" msgstr "Sebesség nyomtatási mozgásokhoz" +msgid "" +"Speed for printing the bridges that support the top layer.\n" +"Can be a % of the bridge speed." +msgstr "" +"A felső réteget tartó hidak nyomtatásának sebessége.\n" +"A híd sebességének %-a lehet." + msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "" "Az utazási mozgások sebessége (távoli extrudálási pontok közötti ugrások)." +msgid "" +"Speed in mm/s of the wipe. If it's faster, it will try to go further away, " +"as the wipe time is set by ( 100% - 'retract before wipe') * 'retaction " +"length' / 'retraction speed'.\n" +"If set to zero, the travel speed is used." +msgstr "" +"A törlő sebessége mm/mp-ben. Ha gyorsabb, akkor megpróbál messzebbre menni, " +"mivel a törlési időt a ( 100% - 'visszahúzás törlés előtt') * 'visszahúzás " +"hossza' / 'visszahúzás sebessége' érték határozza meg.\n" +"Ha nullára van állítva, akkor az utazási sebességet használja." + msgid "Speed of the first cooling move" msgstr "Az első hűtési lépés sebessége" msgid "Speed of the last cooling move" msgstr "Az utolsó hűtési lépés sebessége" +msgid "Speed to extract from melt zone" +msgstr "Az olvadási zónából való kiemelés sebessége" + +msgid "Speed to move into melt zone" +msgstr "Az olvadási zónába való belépés sebessége" + msgid "Speed used at the very beginning of loading phase. " msgstr "A betöltési fázis legelején használt sebesség. " msgid "Speed used for loading the filament on the wipe tower. " -msgstr "A filament törlőtoronyra való betöltéséhez használt sebesség. " +msgstr "" +"Az izzószálnak a törlőtoronyba történő betöltéséhez használt sebesség. " msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming). " -msgstr "A filament törlőtoronynál való kiürítéséhez használt sebesség (nem befolyásolja a kiürítés kezdeti részét közvetlenül a tömörítés után). " +msgstr "" +"A nyomtatószálnak törlőtoronyra történő kiadásához használt sebesség (nem " +"befolyásolja a kiadás kezdeti részét közvetlenül a döngölés után). " msgid "" "Speed used for unloading the tip of the filament immediately after ramming. " -msgstr "A filament kiürítésének sebessége közvetlenül a tömörítés után. " +msgstr "" +"A nyomtatószál hegyének azonnali döngölés utáni tehermentesítésére használt " +"sebesség " msgid "Speed:" msgstr "Sebesség:" @@ -7341,25 +10497,31 @@ msgid "Sphere" msgstr "Gömb" msgid "Spiral Vase" -msgstr "Spirál Váza" +msgstr "Spirális váza" msgid "Spiral vase" -msgstr "Spirál váza" +msgstr "Spirális váza" + +msgid "Splash screen" +msgstr "Kezdőképernyő" + +msgid "Splash screen image" +msgstr "Kezdőképernyő kép" msgid "Split" -msgstr "Felbontás" +msgstr "Osztott" msgid "Split to objects" -msgstr "Objektumokra bontás" +msgstr "Tárgyakra osztás" msgid "Split to Objects" -msgstr "Objektumokra Osztás" +msgstr "Felosztás objektumokra" msgid "Split to parts" -msgstr "Alkatrészekre bontás" +msgstr "Részekre osztva" msgid "Split to Parts" -msgstr "Alkatrészekre bontás" +msgstr "Részekre osztás" msgid "Split triangles" msgstr "Háromszögek felosztása" @@ -7368,31 +10530,44 @@ msgid "Splits bigger facets into smaller ones while the object is painted." msgstr "Az objektum festése közben a nagyobb felületeket kisebbekre osztja." msgid "Spool weight" -msgstr "A spulni súlya" +msgstr "Tekercs súlya" msgid "Stack overflow" msgstr "Verem túlcsordulás" msgid "Standard" -msgstr "Standard" +msgstr "Szabványos" + +msgid "Standard Cube" +msgstr "Standard kocka" + +msgid "" +"Standard cubic xyz cube, with a flat top. Better for infill/perimeter " +"overlap calibration." +msgstr "" +"Szabványos kocka xyz kocka, lapos tetejű. Jobb a kitöltés/peremátfedés " +"kalibrálásához." msgid "Stars" -msgstr "Csillagok" +msgstr "Csillag" msgid "Start a new project" -msgstr "Új projekt elkezdése" +msgstr "Új projekt indítása" msgid "Start at height" -msgstr "Kezdés ebben a magasságban" +msgstr "Kezdő magasság" msgid "Start G-code" -msgstr "G-kód kezdete" +msgstr "G-kód indítása" msgid "Start new slicing process" -msgstr "Új szeletelés indítása" +msgstr "Új szeletelési folyamat indítása" + +msgid "Start temp:" +msgstr "Kezdeti hőmérséklet:" msgid "Start the application" -msgstr "Az alkalmazás indítása" +msgstr "Az alkalmazás elindítása" msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " @@ -7412,38 +10587,54 @@ msgid "" "What do you want to do now?" msgstr "" "A %1% 2.3-tól kezdve a konfigurációs könyvtár Linuxon (az XDG Base Directory " -"Specification szerint) %2%-ra változott.\n" +"Specification szerint) a következőre változik \n" +"%2%.\n" "\n" -"Ez a könyvtár még nem létezett (talán először futtatja az új verziót). A %3%-" -"ban azonban egy régi %1% konfigurációs könyvtárat észleltek.\n" +"Ez a könyvtár még nem létezett (talán először futtatja az új verziót).\n" +"Azonban egy régi %1%-os konfigurációs könyvtárat észleltek a következő " +"helyen \n" +"%3%.\n" "\n" "Fontolja meg a régi könyvtár tartalmának áthelyezését az új helyre, hogy " -"hozzáférhessen a profiljaihoz stb. \n" -"Vegye figyelembe, hogy ha a jövőben úgy dönt, hogy visszaáll a %1%-ra, a " +"hozzáférhessen a profiljaihoz stb.\n" +"Vegye figyelembe, hogy ha a jövőben úgy dönt, hogy a %1%-ot leminősíti, a " "program ismét a régi helyet fogja használni.\n" "\n" "Mit szeretne most tenni?" msgid "Status" -msgstr "Állapot" +msgstr "Státusz" msgid "Status:" msgstr "Státusz:" -msgid "Stealth" -msgstr "Lopakodó" - +msgid "" +"Stay in melt zone for this amount of time before extracting the filament. " +"Not usually necessary." +msgstr "" +"Maradjon az olvadási zónában ennyi ideig, mielőtt kihúzza az izzószálat. " +"Általában nem szükséges." + +msgid "Stealth" +msgstr "Csendes" + msgid "Stealth mode" -msgstr "Lopakodó mód" +msgstr "Halk mód" msgid "stealth mode" -msgstr "lopakodó mód" +msgstr "csendes mód" + +msgid "Step:" +msgstr "Lépés:" + +msgid "Steps:" +msgstr "Lépések:" msgid "Stop at height" -msgstr "Befejezés ebben a magasságban" +msgstr "Megállási magasság" msgid "Stop them and continue anyway?" -msgstr "Megállítja őket, és akkor is folytatja?" +msgstr "Leállítja őket, és mégis folytatja?" msgid "Style" msgstr "Stílus" @@ -7464,112 +10655,185 @@ msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" -"Sikeresen leválasztva. A %s(%s) eszköz most biztonságosan eltávolítható a " -"számítógépről." +"Sikeresen leválasztottuk. A %s(%s) eszköz most már biztonságosan " +"eltávolítható a számítógépről." + +msgid "" +"SuperSlicer is a skinned version of Slic3r, based on PrusaSlicer by Prusa " +"and the original Slic3r by Alessandro Ranellucci & the RepRap community." +msgstr "" +"A SuperSlicer a Slic3r nyúzott változata, amely a Prusa PrusaSlicerén, " +"valamint Alessandro Ranellucci és a RepRap közösség eredeti Slic3rjén alapul." msgid "support" -msgstr "támasz" +msgstr "támasztás" msgid "Support base diameter" -msgstr "A támasztó alapjának átmérője" +msgstr "Támasz alap átmérője" msgid "Support base height" -msgstr "A támasztó alapjának magassága" +msgstr "Támasz alap magassága" msgid "Support base safety distance" -msgstr "A támasztó alapjának biztonsági távolsága" +msgstr "Tartóalap biztonsági távolsága" msgid "Support Blocker" -msgstr "Támasz Blokkoló" +msgstr "Támaszték blokkoló" + +msgid "Support contact distance type" +msgstr "Támasz érintkezési távolság típusa" msgid "Support Cubic" -msgstr "Támasztó Kocka" +msgstr "Támaszték kocka" msgid "Support Enforcer" -msgstr "Támasz Kényszerítő" +msgstr "Támaszték végrehajtó" msgid "Support Generator" -msgstr "Támasz generátor" +msgstr "Alátámasztási generátor" msgid "Support head" msgstr "Támasztó fej" msgid "support interface" -msgstr "támasz felület" +msgstr "támasztó felület" + +msgid "Support interface pattern" +msgstr "Támogatási interfész minta" + +msgid "Support interface speed" +msgstr "Támogatási interfész sebesség" msgid "Support material" -msgstr "Támaszanyag" +msgstr "Alátámasztás" + +msgid "Support material extruder" +msgstr "Támaszanyag-extruder" msgid "Support material interface" -msgstr "Támaszanyag interfész" +msgstr "Támasztóanyag interfész" + +msgid "Support material width" +msgstr "Támaszanyag szélessége" + +msgid "" +"Support material will not be generated for overhangs whose slope angle (90° " +"= vertical) is above the given threshold. In other words, this value " +"represent the most horizontal slope (measured from the horizontal plane) " +"that you can print without support material. Set zero for automatic " +"detection (recommended)." +msgstr "" +"A támogatási anyag nem generálódik olyan túlnyúlásokhoz, amelyek lejtési " +"szöge (90° = függőleges) meghaladja a megadott küszöbértéket. Más szóval, ez " +"az érték jelenti a legnagyobb vízszintes lejtést (a vízszintes síkból " +"mérve), amelyet alátámasztó anyag nélkül nyomtathat. Az automatikus " +"felismeréshez állítsa be a nullát (ajánlott)." msgid "Support material/raft interface extruder" -msgstr "Támaszanyag interfész / tutaj extruder" +msgstr "Támaszanyag/tutaj interfész extruder" msgid "Support on build plate only" -msgstr "Támaszték csak tárgyasztalról" +msgstr "Támogatás csak az ágytól" + +msgid "Support on thumbnail" +msgstr "Támogatás a miniatűrökön" msgid "Support parameter change" -msgstr "Támaszték paraméter változtatása" +msgstr "Alátámasztási paraméterek módosítása" + +msgid "Support pattern" +msgstr "Támaszték minta" + +msgid "Support pattern angle" +msgstr "Támasztási mintázat szöge" msgid "Support pillar" -msgstr "Támasztó pillér" +msgstr "Támasztó oszlop" msgid "Support points density" -msgstr "Támadztó pontok sűrűsége" +msgstr "Támaszpont sűrűsége" msgid "Support points edit" -msgstr "Támasztópontok szerkesztése" +msgstr "Támaszpontok szerkesztés" + +msgid "Support speed" +msgstr "Támaszték sebessége" msgid "Supports" msgstr "Támasztékok" msgid "supports and pad" -msgstr "támasztók és párna" +msgstr "támasztékok és párna" msgid "Supports remaining times" -msgstr "Hátralévő idő támogatása" +msgstr "Támogatja a hátralévő időket" + +msgid "Supports remaining times method" +msgstr "Támogatja a fennmaradó idők módszerét" msgid "Supports stealth mode" -msgstr "Lopakodó mód támogatása" +msgstr "Támogatja a lopakodó módot" + +msgid "" +"Supports work better, if the following feature is enabled:\n" +"- overhangs with bridge speed & fan" +msgstr "" +"A támogatások jobban működnek, ha a következő funkció engedélyezve van:\n" +"- túlnyúlások hídsebességgel és ventilátorral" msgid "Suppress \" - default - \" presets" -msgstr "Az \" - alapértelmezett - \" előbeállítások elrejtése" +msgstr "Előbeállítások \" - alapértelmezett - \" elnyomása" msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" -"Ha engedélyezve van, akkor elrejti az \" - alapértelmezett - \" előre " -"beállított értékeket a Nyomtatás / Filament / Nyomtató kiválasztásában, ha " -"más érvényes előbeállítások állnak rendelkezésre." +"Előbeállítások \" - alapértelmezett - \" elnyomása a Nyomtatás / Szál / " +"Nyomtató választásokban, ha más érvényes előbeállítások is rendelkezésre " +"állnak." msgid "Suppress to open hyperlink in browser" -msgstr "A hiperhivatkozások böngészőben való megnyitásának letiltása" +msgstr "Hiperhivatkozás megnyitása a böngészőben" msgid "SVG" msgstr "SVG" msgid "Swap Y/Z axes" -msgstr "Az Y/Z tengely felcserélése" +msgstr "Y/Z tengelyek cseréje" msgid "Switch between Editor/Preview" -msgstr "Váltás Szerkesztő/Előnézet között" +msgstr "Váltás szerkesztő/előnézet között" + +msgid "Switch between Tab" +msgstr "Lapok közötti váltás" msgid "Switch code to Change extruder" -msgstr "Kapcsolókód az Extruder váltáshoz" +msgstr "Kapcsolókód az extruder cseréjéhez" msgid "Switch code to Color change (%1%) for:" -msgstr "Váltókód színváltáshoz (%1%) a következőhöz:" +msgstr "Kódváltás színváltozásra (%1%) a következő esetekben:" msgid "Switch to editing mode" -msgstr "Váltás szerkesztés módra" +msgstr "Szerkesztési módra váltás" + +msgid "Switch to Preview when sliced" +msgstr "Váltás előnézetre szeleteléskor" msgid "Switch to Settings" -msgstr "Váltás a Beállításokra" +msgstr "Váltson a Beállításokra" + +msgid "Switch when possible" +msgstr "Váltás, ha lehetséges" msgid "Switching Presets: Unsaved Changes" -msgstr "Előbeállítások Átváltása: Nem Mentett Módosítások" +msgstr "Előbeállítások váltása: Nem mentett változtatások" + +msgid "" +"Switching the language will trigger application restart.\n" +"You will lose content of the platter." +msgstr "" +"A nyelv megváltoztatásához újra kell indítani az alkalmazást.\n" +"Elveszítheti a tálca tartalmát." msgid "" "Switching the printer technology from %1% to %2%.\n" @@ -7586,35 +10850,45 @@ msgid "" "\n" "Do you want to proceed?" msgstr "" -"Az egyszerű beállításokra való váltással a speciális módban végzett " -"módosítások elvetésre kerülnek!\n" +"Az egyszerű beállításokra váltás elveti a haladó módban végzett " +"változtatásokat!\n" "\n" -"Akarja folytatni?" +"Akarod folytatni?" msgid "symbolic profile name" -msgstr "szimbolikus profil név" +msgstr "szimbolikus profilnév" msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" -"Támasztórétegek szinkronizálása az objektum nyomtatási rétegekkel. Ez több-" -"anyagos nyomtatóknál hasznos, ahol az extruder váltás költséges művelet." +"A támogatási rétegek szinkronizálása a tárgynyomtatási rétegekkel. Ez több " +"anyagból készült nyomtatóknál hasznos, ahol az extruder váltása költséges." msgid "Synchronize with object layers" msgstr "Szinkronizálás objektumrétegekkel" msgid "System &Info" -msgstr "Rendszer információ" +msgstr "Rendszer &Infó" msgid "System Information" -msgstr "Rendszerinformáció" +msgstr "Rendszer információ" msgid "System presets" -msgstr "Rendszer előbeállítások" +msgstr "Rendszerbeállítások" + +msgid "Tab icon size" +msgstr "Lap ikon mérete" + +msgid "" +" Tab layout: all windows are in the application, all are selectable via a " +"tab." +msgstr "" +" Lap elrendezés: az összes ablak az alkalmazásban van, mindegyik " +"kiválasztható egy tabulátoron keresztül." msgid "Take Configuration &Snapshot" -msgstr "Konfigurációs Pillanatfelvétel Készítése" +msgstr "Konfiguráció &Pillanatkép készítése" msgid "Taking a configuration snapshot" msgstr "Konfigurációs pillanatkép készítése" @@ -7622,26 +10896,35 @@ msgstr "Konfigurációs pillanatkép készítése" msgid "Taking a configuration snapshot failed." msgstr "A konfigurációs pillanatfelvétel készítése nem sikerült." +msgid "Temp" +msgstr "Hőfok" + +msgid "Temp decr:" +msgstr "Hőfok dekl:" + msgid "Temperature" -msgstr "Hőmérséklet" +msgstr "Hőfok" msgid "Temperature (°C)" msgstr "Hőmérséklet (°C)" +msgid "Temperature calibration" +msgstr "Hőmérséklet kalibrálás" + msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" -"Hőmérsékletkülönbség a nem aktív extruderek esetén. Engedélyezi továbbá egy " -"teljes magasságú \"áldozati\" szoknyát amelyen a fúvókák időszakosan " -"tisztításra kerülnek." +"Hőmérsékletkülönbség, amelyet akkor kell alkalmazni, ha az extruder nem " +"aktív. Lehetővé teszi egy teljes magasságú \"áldozati\" szegélyt, amelyen a " +"fúvókákat időszakosan letörlik." msgid "Temperature variation" -msgstr "Hőmérséklet-változás" +msgstr "Hőmérsékletváltozás" msgid "Temperatures" -msgstr "Hőmérséklet(ek)" +msgstr "Hőmérsékletek" msgid "Template Custom G-code" msgstr "G-kód Egyedi Minta" @@ -7649,6 +10932,9 @@ msgstr "G-kód Egyedi Minta" msgid "Test" msgstr "Teszt" +msgid "Test Flow Ratio" +msgstr "Teszt áramlási arány" + msgid "Text colors" msgstr "Szöveg színek" @@ -7656,19 +10942,19 @@ msgid "Texture" msgstr "Textúra" msgid "The %1% infill pattern is not supposed to work at 100%% density." -msgstr "A %1%-os kitöltési minta nem tud 100%%-os sűrűség mellett működni." +msgstr "A %1%-os kitöltési mintának nem kellene működnie 100%%-os sűrűségnél." msgid "The %s device could not have been found" -msgstr "A %s eszköz nem található" +msgstr "A %s eszközt nem sikerült megtalálni" msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" -"Az %s eszköz nem található.\n" -"Ha az eszköz csatlakoztatva van, kérem nyomja meg az USB csatlakozó mellett " -"található Reset gombot ..." +"A %s eszközt nem találtuk.\n" +"Ha az eszköz csatlakoztatva van, kérjük, nyomja meg az USB-csatlakozó " +"melletti Reset gombot ..." msgid "" "The active configuration was created by %1% %2%,\n" @@ -7686,10 +10972,27 @@ msgstr "" "Ha igen, akkor az aktív konfigurációról biztonsági másolat készül az új " "konfiguráció importálása előtt." +msgid "" +"The convex holes will be grown / shrunk in the XY plane by the configured " +"value (negative = inwards, positive = outwards, should be negative as the " +"holes are always a bit smaller irl). This might be useful for fine-tuning " +"hole sizes.\n" +"This setting behaves the same as 'Inner XY size compensation' but only for " +"convex shapes. It's added to 'Inner XY size compensation', it does not " +"replace it. " +msgstr "" +"A domború lyukak az XY síkban a beállított értékkel nőnek/zsugorodnak " +"(negatív = befelé, pozitív = kifelé, negatívnak kell lennie, mivel a lyukak " +"mindig egy kicsit kisebbek irl). Ez hasznos lehet a lyukméretek " +"finomhangolásához.\n" +"Ez a beállítás ugyanúgy viselkedik, mint a 'Belső XY méretkompenzáció', de " +"csak konvex alakzatok esetén. Hozzáadódik a 'Belső XY méretkompenzáció' " +"beállításhoz, nem helyettesíti azt. " + msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" -"Az aktuális egyéni-előbeállítás leválik a szülő rendszer-előbeállításáról." +"Az aktuális egyéni előbeállítás leválik a szülő rendszer előbeállításáról." msgid "" "The currently manipulated object is tilted (rotation angles are not " @@ -7698,34 +11001,43 @@ msgid "" "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" -"Az éppen manipulált objektum ferde (az elforgatási szögek nem 90° " +"Az aktuálisan manipulált objektum megdől (az elforgatási szögek nem 90° " "többszörösei).\n" -"A ferde objektumok nem egységes skálázása csak a világkoordinátarendszerben " -"lehetséges,\n" -"miután a forgatás beágyazódik az objektum koordinátáiba." +"A ferde objektumok nem egyenletes méretezése csak a " +"világkoordinátarendszerben lehetséges,\n" +"miután a forgatás beágyazódott az objektum koordinátáiba." msgid "The default angle for connecting support sticks and junctions." msgstr "" "Az alapértelmezett szög a támasztópálcák és csomópontok összekötéséhez." +msgid "The distance is computed from the brim and not from the objects" +msgstr "A távolságot a peremtől és nem a tárgyaktól kell számítani" + msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" -"A tartóoszlopok végződései az objektum és a párna közötti résen lesznek " -"elhelyezve. Ennek elkerülése érdekében a 'A támasztó alapjának biztonsági " -"távolsága' paraméternek nagyobbnak kell lennie, mint a 'Párna objektum " -"hézag' paraméternek." +"A tartóoszlopok végei a tárgy és a pad közötti résen helyezkednek el. Ennek " +"elkerülése érdekében a 'Support base safety distance' paraméternek " +"nagyobbnak kell lennie, mint a 'Pad object gap' paraméternek." + +msgid "" +"The extruder to use (unless more specific extruder settings are specified) " +"for the first layer." +msgstr "" +"Az első réteghez használandó extruder (hacsak nincsenek konkrétabb " +"extruderbeállítások megadva)." msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" -"A használni kívánt extruder (kivéve, ha specifikusabb extruder-beállítások " -"vannak megadva). Ez az érték felülbírálja a perem- és a kitöltő " -"extrudereket, de a tartó extrudereket nem." +"A használandó extruder (kivéve, ha konkrétabb extruderbeállítások vannak " +"megadva). Ez az érték felülírja a kerületi és kitöltő extrudereket, de nem a " +"támasztó extrudereket." msgid "The extruder to use when printing infill." msgstr "A kitöltés nyomtatásához használt extruder." @@ -7733,32 +11045,48 @@ msgstr "A kitöltés nyomtatásához használt extruder." msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "" -"A kerület és a karima nyomtatásához használt extruder. Az első extruder az 1-" -"es." +"Az extruder, amelyet a kerület és a perem nyomtatásához használ. Az első " +"extruder az 1." msgid "The extruder to use when printing solid infill." -msgstr "A tömör kitöltés nyomtatásához használt extruder." +msgstr "A tömör kitöltőanyag nyomtatásához használt extruder." + +msgid "" +"The extruder to use when printing support material (1+, 0 to use the current " +"extruder to minimize tool changes)." +msgstr "" +"A hordozóanyag nyomtatásához használandó extruder (1+, 0 az aktuális " +"extruder használatához a szerszámcserék minimalizálása érdekében)." msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" -"A támaszanyag interfész nyomtatásához használt extruder (1+, 0 az éppen " -"aktuális extruder használatához a szerszámváltások minimalizálása " -"érdekében). Ez hatással van a tutajra is." +"A támaszanyag-felület nyomtatásakor használandó extruder (1+, 0 az aktuális " +"extruder használatához a szerszámváltások minimalizálása érdekében). Ez " +"hatással van a tutajra is." msgid "The filament material type for use in custom G-codes." -msgstr "A filament típus egyedi G-kódokhoz használható." +msgstr "Az egyéni G-kódokban használt nyomtatószál típusa." msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "" -"Az a fájl, ahová a kimenet kiírásra kerül (ha nincs megadva, akkor a " -"bemeneti fájlon alapul)." +"Az a fájl, ahová a kimenet íródik (ha nincs megadva, a kimenet a bemeneti " +"fájlon alapul)." msgid "The firmware supports stealth mode" -msgstr "A firmware támogatja a lopakodó módot" +msgstr "A firmware támogatja a lopakodó üzemmódot" + +msgid "" +"The first layer will be grown / shrunk in the XY plane by the configured " +"value to compensate for the 1st layer squish aka an Elephant Foot effect. " +"(should be negative = inwards)" +msgstr "" +"Az első réteg az XY síkban a beállított értékkel növekszik/zsugorodik, hogy " +"kompenzálja az 1. réteg összenyomódását, azaz az Elefántláb-effektust. " +"(negatívnak kell lennie = befelé)" msgid "The following characters are not allowed by a FAT file system:" msgstr "A következő karaktereket a FAT fájlrendszer nem támogatja:" @@ -7767,7 +11095,7 @@ msgid "the following characters are not allowed:" msgstr "a következő karakterek nem engedélyezettek:" msgid "The following FFF printer models have no filament selected:" -msgstr "A következő FFF nyomtatókhoz nincs kiválasztva filament:" +msgstr "A következő FFF-nyomtató modelleknél nincs kiválasztva nyomtatószál:" msgid "" "The following line %s contains reserved keywords.\n" @@ -7800,38 +11128,46 @@ msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" -"A következő billentyűparancsok használhatók a G-kód előnézetében, amikor a " -"vízszintes csúszka aktív" +"A következő parancsikonok alkalmazhatók a G-kód előnézetben, ha a vízszintes " +"csúszka aktív" msgid "" "The following shortcuts are applicable in G-code preview when the vertical " "slider is active" msgstr "" -"A következő billentyűparancsok használhatók a G-kód előnézetében, amikor a " -"függőleges csúszka aktív" +"A következő parancsikonok alkalmazhatók a G-kód előnézetben, ha a függőleges " +"csúszka aktív" msgid "" "The following shortcuts are applicable when the specified gizmo is active" msgstr "" -"A következő parancsikonok akkor alkalmazhatók, ha a megadott gizmo aktív" +"A következő parancsikonok akkor alkalmazhatók, ha a megadott szerkentyű aktív" msgid "The following SLA printer models have no materials selected:" -msgstr "A következő SLA nyomtatókhoz nincs kiválasztva anyag:" +msgstr "A következő SLA nyomtató modellekhez nincs anyag kiválasztva:" msgid "the following suffix is not allowed:" -msgstr "a következő utótag nem engedélyezett:" +msgstr "a következő utótag nem megengedett:" msgid "The following values were substituted:" -msgstr "A következő értékek helyettesítésre kerültek:" +msgstr "A következő értékeket helyettesítettük:" msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." +msgstr "Az objektum alja és a generált pad közötti rés nulla magassági módban." + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" msgstr "" -"Az objektum alja és a generált párna közötti hézag nulla magasságú módban." +"A geometriát az éles szögek dekódolása előtt megtizedelik. Ez a paraméter a " +"decimáláshoz szükséges eltérés minimális hosszát adja meg.\n" +"0 a kikapcsoláshoz" msgid "The height of the pillar base cone" -msgstr "A pillér alapkúpjának magassága" +msgstr "Az oszlop alapkúpjának magassága" msgid "" "The imported SLA archive did not contain any presets. The current SLA " @@ -7840,41 +11176,68 @@ msgstr "" "Az importált SLA-archívum nem tartalmazott előbeállításokat. Az aktuális SLA " "előbeállítások kerülnek felhasználásra." +msgid "" +"The infill / perimeter encroachment can't be higher than half of the " +"perimeter width.\n" +"Are you sure to use this value?" +msgstr "" +"A kitöltés/körülhatárolás nem lehet magasabb, mint a kerületi szélesség " +"fele.\n" +"Biztos, hogy ezt az értéket kell használni?" + msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" -"Az utolsó színváltási adatok több extruderrel történő nyomtatáshoz a teljes " -"nyomtatásra vonatkozó szerszámváltásokkal együtt elmentésre kerültek." +"Az utolsó színváltoztatási adatokat a több extruderrel történő nyomtatáshoz " +"mentettük el, a teljes nyomtatásra vonatkozó szerszámváltásokkal együtt." msgid "The last color change data was saved for a multi extruder printing." msgstr "" -"Az utolsó színváltási adatokat több extruderrel történő nyomtatáshoz " +"Az utolsó színváltoztatási adatokat több extruderrel történő nyomtatáshoz " "mentették el." msgid "The last color change data was saved for a single extruder printing." msgstr "" -"Az utolsó színváltási adatokat egyetlen extruderrel történő nyomtatáshoz " -"mentették el." +"Az utolsó színváltoztatási adatokat egyetlen extruderrel történő " +"nyomtatáshoz mentették el." msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" -"Két oszlop maximális távolsága, amelyeket még össze lehet kötni egymással. A " -"nulla érték tiltja az oszlopok kaszkádosítását." +"Két oszlop maximális távolsága, hogy összekapcsolódjon egymással. A nulla " +"érték tiltja az oszlopok kaszkádosítását." msgid "The max length of a bridge" msgstr "A híd maximális hossza" +msgid "" +"The maximum detour length for avoid crossing perimeters. If the detour is " +"longer than this value, avoid crossing perimeters is not applied for this " +"travel path. Detour length can be specified either as an absolute value or " +"as percentage (for example 50%) of a direct travel path." +msgstr "" +"A kerülőút maximális hossza a keresztezési határok elkerülése érdekében. Ha " +"a kerülőút hosszabb ennél az értéknél, akkor a kerülőút nem kerül " +"alkalmazásra erre az útvonalra. A kerülőút hossza megadható abszolút " +"értékként vagy a közvetlen haladási útvonal százalékában (például 50%)." + +msgid "" +"The milling cutter to use (unless more specific extruder settings are " +"specified). " +msgstr "" +"A használni kívánt marógép (kivéve, ha specifikusabb extruder-beállítások " +"vannak megadva). " + msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" -"Az pillér alapjának legkisebb távolsága a modelltől mm-ben. Értelemszerűen a " -"nulla magasságú módban van értelme, ahol a modell és a pillér közé egy ennek " -"a paraméternek megfelelő rés kerül beillesztésre." +"Az oszlop alapjának minimális távolsága a modelltől mm-ben. A nulla " +"magasságú üzemmódban van értelme, ahol a modell és a pillér közé egy ennek a " +"paraméternek megfelelő rés kerül beillesztésre." msgid "The name cannot be empty." msgstr "A név nem lehet üres." @@ -7892,45 +11255,81 @@ msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" -"Megnöveli az alsó szilárd rétegek számát a bottom_solid_layers fölé, ha " +"Az alsó szilárd rétegek számát a bottom_solid_layers felett növelni kell, ha " "szükséges az alsó héj minimális vastagságának teljesítéséhez." +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be gradually shrunk less, up to the layer indicated by " +"this value." +msgstr "" +"Azon rétegek száma, amelyeken az elefántláb-kompenzáció aktív lesz. Az első " +"réteg az elefántláb-kompenzáció értékével zsugorodik, majd a következő " +"rétegek fokozatosan kisebbre zsugorodnak, egészen az ezen érték által " +"megadott rétegig." + msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" -"A felső szilárd rétegek számát a top_solid_layers érték fölé lesz növelve, " -"amennyiben ez szükséges a felső héj minimális vastagságának kielégítéséhez.\n" -"Ez hasznos a változó rétegmagasságú nyomtatásnál a \" párnásodás\" effektus " -"elkerülése érdekében." +"A felső tömör rétegek számát a top_solid_layers felett növeljük, ha " +"szükséges a felső héj minimális vastagságának kielégítéséhez. Ez hasznos a " +"változó rétegmagasságú nyomtatásnál a \"pillowing\" hatás elkerülése " +"érdekében." msgid "The object is too small" msgstr "Az objektum túl kicsi" +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'exterior' shell of the object.\n" +" !!! it's recommended you put the same value into the 'Inner XY size " +"compensation', unless you are sure you don't have horizontal holes. !!! " +msgstr "" +"Az objektum az XY-síkban a beállított értékkel növekszik/zsugorodik (negatív " +"= befelé, pozitív = kifelé). Ez hasznos lehet a méretek finomhangolásához.\n" +"Ez csak az objektum \"külső\" héjára vonatkozik.\n" +" !!! Ajánlott ugyanezt az értéket a 'Belső XY méretkompenzáció' értékébe is " +"betenni, kivéve, ha biztos vagy benne, hogy nincsenek vízszintes lyukak. !!! " + +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'inner' shell of the object (!!! horizontal " +"holes break the shell !!!)" +msgstr "" +"Az objektum az XY-síkban a beállított értékkel növekszik/zsugorodik (negatív " +"= befelé, pozitív = kifelé). Ez hasznos lehet a méretek finomhangolásához.\n" +"Ez csak az objektum \"belső\" héjára vonatkozik (!!! vízszintes lyukak " +"megtörik a héjat !!!)" + msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" -"Az objektum ennyi réteggel megemeljük, és alatta támasztékot (tutaj) hozunk " +"Az objektumot ennyi réteggel emeljük meg, és alatta támasztóanyagot hozunk " "létre." msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" -"A kisebb pillérek normál pillérek átmérőjéhez viszonyított aránya, amelyeket " -"olyan problémás helyeken használnak, ahol egy normál pillér nem fér el." +"A normál oszlopátmérőhöz képest kisebb oszlopok aránya, amelyeket olyan " +"problémás területeken használnak, ahol egy normál oszlop nem fér el." msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" -"A tárgyasztalhoz viszonyított százalékos arány. \n" -"Ha a nyomtatott felület tárgyasztalhoz viszonyított százalékos aránya " -"meghaladja a megadott értéket, \n" -"akkor lassú billenés, ellenkező esetben gyors billenés fog történni" +"Az ágyterület százalékos aránya. \n" +"Ha a nyomtatási terület meghaladja a megadott értéket, \n" +"akkor lassú billenés, ellenkező esetben gyors billenés lesz használatban" msgid "" "The physical printer below is based on the preset, you are going to delete." @@ -7956,6 +11355,13 @@ msgstr[1] "" "Az alábbi fizikai nyomtatók csak azon az előbeállításon alapulnak, amelyet " "törölni készül." +msgid "" +"The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/" +"natural, 0.2-0.5 for white and 1 for black." +msgstr "" +"A pigment % a szálhoz (0 és 1 között, 1=100%). 0 az áttetsző/természetes, " +"0,2-0,5 a fehér és 1 a fekete." + msgid "" "The places where the brim will be printed around each object on the first " "layer." @@ -7963,6 +11369,15 @@ msgstr "" "Azok a helyek, ahol a karima az első réteg minden egyes objektuma köré " "kinyomtatásra kerül." +msgid "" +"The position of the model origin (point with coordinates x:0, y:0, z:0) " +"needs to be in the middle of the print bed area. If you load a custom model " +"and it appears misaligned, the origin is not set properly." +msgstr "" +"A modell kezdőpontjának (pont x:0, y:0, z:0 koordinátákkal) a nyomtatási " +"ágyterület közepén kell lennie. Ha egyéni modellt tölt be, és az rosszul " +"igazodik, akkor az origó nincs megfelelően beállítva." + msgid "" "The preset below was temporarily installed on the active instance of " "PrusaSlicer" @@ -7982,7 +11397,7 @@ msgstr[0] "Az előbeállítás módosításai sikeresen elmentésre kerültek" msgstr[1] "Az előbeállítások módosításai sikeresen elmentésre kerültek" msgid "The printer multiplexes filaments into a single hot end." -msgstr "A nyomtató a filamenteket egyetlen 'hot endbe' fűzi." +msgstr "A nyomtató a szálakat egyetlen forró végbe multiplexeli." msgid "The provided file name is not valid." msgstr "A megadott fájlnév érvénytelen." @@ -8012,7 +11427,7 @@ msgstr "" "festett objektumot tartalmaz, és nem kompatibilis." msgid "The selected file" -msgstr "A kiválasztott fájl" +msgstr "A kijelölt fájl" msgid "The selected file contains no geometry." msgstr "A kiválasztott fájl nem tartalmaz geometriát." @@ -8020,14 +11435,12 @@ msgstr "A kiválasztott fájl nem tartalmaz geometriát." msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" -"A kiválasztott fájl több szétválasztott területet tartalmaz. Ez nem " -"támogatott." +"A kiválasztott fájl több különálló területet tartalmaz. Ez nem támogatott." msgid "" "The selected object couldn't be split because it contains only one part." msgstr "" -"A kijelölt objektumot nem lehetett felbontani, mert csak egy alkatrészt " -"tartalmaz." +"A kijelölt objektumot nem lehetett felosztani, mert csak egy részt tartalmaz." msgid "" "The selected object couldn't be split because it contains only one solid " @@ -8041,7 +11454,7 @@ msgid "" "Do you want to remove it from the recent projects list?" msgstr "" "A kiválasztott projekt már nem elérhető.\n" -"El szeretné távolítani a legutóbbi projektek listájáról?" +"Szeretné eltávolítani a legutóbbi projektek listájáról?" msgid "" "The sequential print is on.\n" @@ -8056,12 +11469,20 @@ msgid "" "sequentually.\n" "This code won't be processed during G-code generation." msgstr "" -"A szekvenciális nyomtatás aktív.\n" -"Ilyenkor nem lehet az objektumokhoz egyéni G-kódot adni.\n" +"A szekvenciális nyomtatás beindult.\n" +"A szekvenciális nyomtatású objektumokhoz nem lehet egyéni G-kódot " +"alkalmazni.\n" "Ez a kód nem kerül feldolgozásra a G-kód generálásakor." +msgid "" +"The settings have a lock and dot to show how they are modified. You can hide " +"them by uncheking this option." +msgstr "" +"A beállítások egy lakattal és egy ponttal jelzik a módosítás módját. Ezeket " +"elrejtheti, ha feloldja ezt az opciót." + msgid "The size of the object can be specified in inches" -msgstr "Az objektum mérete Inch-ben is megadható" +msgstr "Az objektum mérete hüvelykben adható meg" msgid "The size of the object is zero" msgstr "Az objektum mérete zéró" @@ -8073,37 +11494,52 @@ msgstr "" "Az SLA archívum nem tartalmaz előbeállításokat. Kérjük, aktiváljon néhány " "SLA nyomtató előbeállítást az SLA archívum importálása előtt." +msgid "The slicer detected system SSL certificate store in: %1%" +msgstr "" +"A szeletelő észlelte a rendszer SSL tanúsítványtárolóját a következő helyen: " +"%1%" + msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "" -"A párnafal meredeksége a tárgyasztal síkjához képest. A 90 fok egyenes falat " -"jelent." +"A betétfal lejtése az ágy síkjához képest. A 90 fok egyenes falat jelent." + +msgid "" +"The speed for loading of a filament into extruder after retraction (this " +"only applies to the extruder motor). If left as zero, the retraction speed " +"is used." +msgstr "" +"Az extruderbe visszahúzás után a szál betöltésének sebessége (ez csak az " +"extrudermotorra vonatkozik). Ha nulla marad, akkor a visszahúzási sebességet " +"használja a rendszer." + +msgid "The speed for retractions (this only applies to the extruder motor)." +msgstr "A behúzási sebesség (ez csak az extruder motorjára vonatkozik)." msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "" -"A Spirálváza opció csak egyféle anyagból álló objektum nyomtatásához " -"használható." +"A Spirálváza opció csak egyedi anyagú objektumok nyomtatásához használható." msgid "The supplied name is empty. It can't be saved." -msgstr "A megadott név üres. Nem menthető el." +msgstr "A megadott név üres. Nem lehet elmenteni." msgid "The supplied name is not available." msgstr "A megadott név nem elérhető." msgid "The supplied name is not valid;" -msgstr "A megadott név érvénytelen;" +msgstr "A megadott név nem érvényes;" msgid "The supplied settings will cause an empty print." -msgstr "A megadott beállítások üres nyomtatáshoz vezetnek." +msgstr "A megadott beállítások üres nyomtatást eredményeznek." msgid "The thickness of the pad and its optional cavity walls." -msgstr "A párna és az opcionális üreg falainak vastagsága." +msgstr "A betét és az opcionális üregfalak vastagsága." msgid "The uploads are still ongoing" -msgstr "A feltöltések még mindig folyamatban vannak" +msgstr "A feltöltések folyamatban vannak" msgid "" "The vertical distance between object and raft. Ignored for soluble interface." @@ -8111,19 +11547,31 @@ msgstr "" "Az objektum és a tutaj közötti függőleges távolság. Oldható határfelület " "esetén figyelmen kívül hagyva." +msgid "" +"The volume multiplier used to compute the final volume to extrude by the " +"algorithm." +msgstr "" +"Az algoritmus által extrudálandó végső térfogat kiszámításához használt " +"térfogatszorzó." + +msgid "" +"The volume of melted plastic inside your nozzle. Used by 'advanced wiping'." +msgstr "" +"A fúvókában lévő olvadt műanyag térfogata. A 'fejlett törlés' által használt." + msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"A Törlés opció nem érhető el a Firmware visszahúzás mód használatakor.\n" +"A Törlés opció nem érhető el a Firmware Retraction mód használatakor.\n" "\n" -"Kikapcsolja a Törlést, hogy engedélyezze a Firmware visszahúzást?" +"Le kell tiltanom a firmware-visszavonás engedélyezéséhez?" msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." msgstr "" -"A törlőtorony jelenleg nem támogatja a volumetrikus E-t (use_volumetric_e=0)." +"A Wipe Tower jelenleg nem támogatja a volumetrikus E-t (use_volumetric_e=0)." msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " @@ -8131,10 +11579,10 @@ msgid "" "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" -"A törlőtorony jelenleg csak akkor támogatja a nem oldható támasztékokat, ha " -"azok az aktuális extruderrel nyomtathatók szerszámváltás nélkül. (mind a " +"A Wipe Tower jelenleg csak akkor támogatja a nem oldódó támasztékokat, ha " +"azokat az aktuális extruderrel nyomtatják, szerszámcsere nélkül. (mind a " "support_material_extruder, mind a support_material_interface_extruder " -"értékét 0-ra kell állítani)." +"értéket 0-ra kell állítani)." msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" @@ -8143,83 +11591,90 @@ msgid "" "(both support_material_extruder and support_material_interface_extruder need " "to be set to 0)." msgstr "" -"A törlőtorony jelenleg csak a nem oldódó támaszokat támogatja\n" -"ha az aktuális extruderrel nyomtatják szerszámcsere kiváltása nélkül.\n" -"(mind a support_material_extruder, mind a " -"support_material_interface_extruder értéket 0-ra kell állítani)." +"A Wipe Tower jelenleg csak a nem oldódó hordozókat támogatja. Ha azokat az " +"aktuális\n" +"extruderrel nyomtatják, anélkül, hogy szerszámváltást váltanának ki, akkor 0-" +"ra kell\n" +"(állítani a support_material_extruder, és a " +"support_material_interface_extruder értékét)." msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." msgstr "" -"A törlőtorony jelenleg nem támogatott a több anyagos szekvenciális nyomatok " -"esetében." +"A Wipe Tower jelenleg nem támogatott többanyagú szekvenciális nyomatokhoz." + +msgid "" +"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " +"and Repetier G-code flavors." +msgstr "" +"A Wipe Tower jelenleg csak a Marlin, RepRap/Sprinter és Repetier G-kódos " +"szoftverekhez támogatott." msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "" -"A törlőtorony jelenleg csak relatív extruder címzéssel " -"(use_relative_e_distances=1) támogatott." +"A Wipe Tower jelenleg csak a relatív extruder-címzéssel támogatott " +"(use_relative_e_distances=1)." msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" -"A törlőtorony csak akkor támogatott több objektum nyomtatása esetén, ha azok " -"azonos számú tutaj rétegre vannak nyomtatva" +"A Wipe Tower csak akkor támogatott több objektum esetén, ha azokat azonos " +"számú tutajrétegre nyomtatják" msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" -"A törlőtorony csak akkor támogatott több objektum esetében, ha azok azonos " -"support_material_contact_distance paraméterbeálltással vannak nyomtatva" +"A Wipe Tower csak akkor támogatott több objektum esetén, ha ugyanazzal a " +"support_material_contact_distance-vel vannak kinyomtatva" msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" -"A törlőtorony csak akkor támogatott több objektum esetén, ha azok egyformán " +"A Wipe Tower csak akkor támogatott több objektum esetén, ha azok egyenlően " "vannak felszeletelve." msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" -"A törlőtorony csak akkor támogatott több objektum nyomtatásához, ha azok " -"azonos rétegmagassággal rendelkeznek" +"A Wipe Tower csak akkor támogatott több objektum esetén, ha azonos " +"rétegmagasságúak" msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" -"A törlőtorony csak akkor támogatott, ha minden extruder azonos " -"fúvókaátmérővel rendelkezik és azonos átmérőjű filamentet használ." +"A törlőtorony csak akkor támogatott, ha minden extrudernek azonos a fúvóka " +"átmérője, és azonos átmérőjű filamenteket használnak." msgid "" "The Wipe tower is only supported if all objects have the same variable layer " "height" msgstr "" -"A törlőtorony csak akkor támogatott, ha minden objektumnak ugyanaz a változó " -"rétegmagassága" +"A törlőtorony csak akkor támogatott, ha minden objektum azonos változó " +"rétegmagassággal rendelkezik" msgid "There are active warnings concerning sliced models:" -msgstr "Aktív figyelmeztetések vonatkoznak a szeletelt modellekre:" +msgstr "Aktív figyelmeztetések vannak a szeletelt modellekkel kapcsolatban:" msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" -"Vannak nem nyomtatható objektumok. Próbálja meg módosítani a támasztó " +"Vannak nyomtathatatlan tárgyak. Próbálja meg módosítani a támogatási " "beállításokat, hogy az objektumok nyomtathatóvá váljanak." msgid "" "There is a color change for extruder that has not been used before.\n" "Check your settings to avoid redundant color changes." msgstr "" -"Az extrudernek olyan színre kellene váltania, amelyet korábban nem " -"használtak.\n" +"Van egy színváltás az extruder számára, amelyet korábban nem használtak.\n" "Ellenőrizze a beállításokat a felesleges színváltások elkerülése érdekében." msgid "" @@ -8227,23 +11682,57 @@ msgid "" "print job.\n" "This code won't be processed during G-code generation." msgstr "" -"Színváltás tartozik egy olyan extruderhez, amelyet a nyomtatási feladat " -"végéig nem használnak.\n" +"Van egy színváltás az extruderhez, amelyet a nyomtatási feladat végéig nem " +"használnak.\n" "Ez a kód nem kerül feldolgozásra a G-kód generálásakor." msgid "" "There is an extruder change set to the same extruder.\n" "This code won't be processed during G-code generation." msgstr "" -"Az aktuáli extruderrel megegyező extruderre való váltás van beállítva.\n" +"Ugyanarra az extruderre van beállítva egy extruder-váltás.\n" "Ez a kód nem kerül feldolgozásra a G-kód generálásakor." msgid "There is an object with no extrusions in the first layer." msgstr "" "Van egy olyan objektum, amihez nem tartozik extrudálás az első rétegen." +msgid "" +"These parameters allow the slicer to smooth the angles in each layer. The " +"precision will be at least the new precision of the curve. Set to 0 to " +"deactivate.\n" +"Note: as it uses the polygon's edges and only works in the 2D planes, you " +"must have a very clean or hand-made 3D model.\n" +"It's really only useful to smoothen functional models or very wide angles." +msgstr "" +"Ezek a paraméterek lehetővé teszik, hogy a szeletelő az egyes rétegek " +"szögeit simítsa. A pontosság legalább a görbe új pontossága lesz. A " +"kikapcsoláshoz állítsa 0-ra.\n" +"Megjegyzés: mivel a poligon éleit használja, és csak a 2D-s síkokban " +"működik, nagyon tiszta vagy kézzel készített 3D-s modellre van szükség.\n" +"Valójában csak funkcionális modellek vagy nagyon széles szögek simításához " +"hasznos." + +msgid "Thin wall" +msgstr "Vékony fal" + +msgid "Thin wall merge" +msgstr "Vékony fal egyesítés" + +msgid "Thin wall overlap" +msgstr "Vékony fal átfedés" + +msgid "Thin walls" +msgstr "Vékony falak" + +msgid "Thin walls min width" +msgstr "Vékony falak min szélesség" + +msgid "Thin walls speed" +msgstr "Vékony falak sebessége" + msgid "This %s version: %s" -msgstr "Ez a %s verzió: %s" +msgstr "A %s verzió: %s" msgid "" "This action is not revertible.\n" @@ -8256,6 +11745,85 @@ msgid "This action will cause deletion of all ticks on vertical slider." msgstr "" "Ez a művelet a függőleges csúszkán lévő összes jelölő törléséhez vezet." +msgid "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 S" +"{first_layer_temperature}\" command wherever you want." +msgstr "" +"Ez a kód a szekvenciális nyomtatás használatakor az objektumok közé kerül. " +"Alapértelmezés szerint az extruder és az ágy hőmérséklete a nem várakozó " +"parancs segítségével visszaáll; azonban ha az M104, M109, M140 vagy M190 " +"kódot észleli ez az egyéni kód, a Slic3r nem ad hozzá hőmérséklet-" +"parancsokat. Vegye figyelembe, hogy minden Slic3r-beállításhoz használhat " +"helyőrző változókat, így bárhová beírhat egy \"M109 " +"S{first_layer_temperature}\" parancsot." + +msgid "" +"This custom code is inserted at every extrusion type change.Note that you " +"can use placeholder variables for all Slic3r settings as well as " +"{last_extrusion_role}, {extrusion_role}, {layer_num} and {layer_z}. The " +"'extrusion_role' strings can take these string values: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " +"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " +"SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the " +"role of the extrusion is not unique, not exactly inside another category or " +"not known." +msgstr "" +"Ezt az egyéni kódot a rendszer minden kihúzástípus-módosításkor beilleszti. " +"Vegye figyelembe, hogy használhat helyőrző változókat az összes Slic3r " +"beállításhoz, valamint a {last_extrusion_role}, {extrusion_role}, " +"{layer_num} és {layer_z} paraméterekhez. Az 'extrusion_role' karakterláncok " +"a következő karakterlánc-értékeket vehetik fel: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " +"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " +"SupportMaterialInterface, WipeTower, Mixed}. A Mixed csak akkor használható, " +"ha az extrudálás szerepe nem egyedi, nem pontosan más kategóriában belül, " +"vagy nem ismert." + +msgid "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as {layer_num} and " +"{layer_z}." +msgstr "" +"Ezt az egyéni kódot minden rétegváltáskor beillesztjük, közvetlenül a Z " +"elmozdulás után, és mielőtt az extruder az első rétegpontra mozdulna. Vegye " +"figyelembe, hogy használhat helyőrző változókat az összes Slic3r " +"beállításhoz, valamint a {layer_num} és {layer_z} értékekhez." + +msgid "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as {layer_num} and {layer_z}." +msgstr "" +"Ez az egyéni kód minden rétegváltáskor, közvetlenül a Z elmozdulás előtt " +"kerül beillesztésre. Vegye figyelembe, hogy helyőrző változókat használhat " +"az összes Slic3r-beállításhoz, valamint a {layer_num} és {layer_z} " +"értékekhez." + +msgid "" +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode (and before any toolchange from this filament in case of " +"multimaterial printers). Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." +msgstr "" +"Ez a befejező eljárás a kimeneti fájl végére kerül, a nyomtató végének G-" +"kódja elé (és többanyagú nyomtatók esetén az adott szálból történő " +"szerszámváltás előtt). Vegye figyelembe, hogy minden Slic3r-beállításhoz " +"használhat helyőrző változókat. Ha több extruderrel rendelkezik, a G-kód " +"feldolgozása az extruder sorrendjében történik." + +msgid "" +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." +msgstr "" +"Ez a befejező eljárás a kimeneti fájl végére kerül. Vegye figyelembe, hogy a " +"Slic3r összes beállításához használhat helyőrző változókat." + msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " @@ -8263,17 +11831,32 @@ msgid "" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" "Ez a kísérleti beállítás az extrudálási sebesség változásának sebességét " -"korlátozza. Az 1,8 mm³/s² érték biztosítja, hogy az 1,8 mm³/s extrudálási " -"sebesség (0,45 mm extrudálási szélesség, 0,2 mm extrudálási magasság, 20 mm/" -"s előtolási sebesség) és 5,4 mm³/s (60 mm/s előtolási sebesség) közötti " -"átmenet legalább 2 másodpercig tartson." +"korlátozza. Az 1,8mm³/mp² érték biztosítja, hogy az 1,8mm³/mp extrudálási " +"sebesség (0,45mm extrudálási szélesség, 0,2mm extrudálási magasság, 20mm/mp " +"előtolási sebesség) és 5,4mm³/mp (60 mm/mp előtolási sebesség) közötti " +"változás legalább 2 másodpercig tart." msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" "Ez a kísérleti beállítás a G10 és G11 parancsokat használja, hogy a firmware " -"kezelje a visszahúzást. Ezt csak a legújabb Marlin támogatja." +"kezelje a behúzást. Ezt csak a legújabb Marlin támogatja." + +msgid "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." +msgstr "" +"Ez a kísérleti beállítás lineáris milliméter helyett köbmilliméterben adja " +"ki az E értékeket. Ha a firmware még nem ismeri az izzószál átmérő(ke)t, " +"akkor olyan parancsokat adhat, mint az 'M200 D{filament_diameter_0} T0' " +"parancsot a start G-kódba, hogy bekapcsolja a volumetrikus üzemmódot, és a " +"Slic3r-ben kiválasztott izzószálhoz tartozó izzószál-átmérőt használja. Ezt " +"csak a legújabb Marlin támogatja." msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " @@ -8282,10 +11865,84 @@ msgid "" "more, check filament diameter and your firmware E steps." msgstr "" "Ez a tényező arányosan változtatja az áramlás mennyiségét. Lehet, hogy ezt a " -"beállítást finomítani kell a szép felület és a megfelelő egyfalú szélesség " -"eléréséhez. A szokásos értékek 0,9 és 1,1 között vannak. Ha úgy gondolja, " -"hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament átmérőjét " -"és a firmware E lépéseit." +"beállítást finomítani kell a szép felületkezelés és a megfelelő egyfalú " +"szélesség eléréséhez. A szokásos értékek 0,9 és 1,1 között vannak. Ha úgy " +"gondolja, hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament " +"átmérőt és a firmware E lépéseket." + +msgid "" +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 90% and 110%. If you think you need to change this " +"more, check filament diameter and your firmware E steps. This print setting " +"is multiplied against the extrusion_multiplier from the filament tab. Its " +"only purpose is to offer the same functionality but on a per-object basis." +msgstr "" +"Ez a tényező arányosan változtatja az áramlás mennyiségét. Lehet, hogy ezt a " +"beállítást finomítani kell a szép felületkezelés és a megfelelő egyfalú " +"szélesség eléréséhez. A szokásos értékek 90% és 110% között vannak. Ha úgy " +"gondolja, hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament " +"átmérőjét és a firmware E lépéseit. Ezt a nyomtatási beállítást megszorozzuk " +"a filament fül extrusion_multiplier értékével. Egyetlen célja, hogy ugyanazt " +"a funkciót kínálja, de objektumonként." + +msgid "" +"This fan speed is enforced during all infill bridges. It won't slow down the " +"fan if it's currently running at a higher speed.\n" +"Set to 1 to follow default speed.\n" +"Set to -1 to disable this override (internal bridges will use Bridges fan " +"speed).\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Ez a ventilátor fordulatszám minden hídkitöltésnél érvényesül. Nem lassítja " +"le a ventilátort, ha az éppen gyorsabban megy.\n" +"Az alapértelmezett sebesség követéséhez állítsa 1-re.\n" +"Állítsa -1-re, hogy letiltsa ezt a felülbírálást (a belső hidak " +"ventilátorsebességét használja).\n" +"Csak a disable_fan_first_layers segítségével írható felül." + +msgid "" +"This fan speed is enforced during all top fills.\n" +"Set to 1 to disable the fan.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Ez a ventilátorsebesség minden felső töltésnél érvényesül.\n" +"A ventilátor kikapcsolásához állítsa 1-re.\n" +"A -1 értéket állítsa be a felülbírálat letiltásához.\n" +"Csak a disable_fan_first_layers paranccsal írható felül." + +msgid "" +"This fan speed is enforced during bridges and overhangs. It won't slow down " +"the fan if it's currently running at a higher speed.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Ez a ventilátorsebesség hidak és túlnyúlások során érvényesül. Nem lassítja " +"le a ventilátort, ha éppen nagyobb sebességgel működik.\n" +"A felülírás letiltásához állítsa -1-re.\n" +"Csak a disable_fan_first_layers által felülírható." + +msgid "" +"This feature allows you to combine infill and speed up your print by " +"extruding thicker infill layers while preserving thin perimeters, thus " +"accuracy." +msgstr "" +"Ez a funkció lehetővé teszi a kitöltés kombinálását és a nyomtatás " +"felgyorsítását a vastagabb kitöltőrétegek extrudálásával, miközben megőrzi a " +"vékony perimétereket, így a pontosságot." + +msgid "" +"This feature allows you to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." +msgstr "" +"Ez a funkció lehetővé teszi, hogy adott számú rétegenként egy tömör réteget " +"kényszerítsen ki. Nulla a letiltáshoz. Ezt bármilyen értékre beállíthatja " +"(például 9999); a Slic3r automatikusan kiválasztja a maximálisan lehetséges " +"kombinálandó rétegek számát a fúvóka átmérőjének és a rétegmagasságnak " +"megfelelően." msgid "" "This feature will raise Z gradually while printing a single-walled object in " @@ -8294,17 +11951,17 @@ msgid "" "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" -"Ez a funkció fokozatosan megemeli a Z értékét az egyfalú objektum nyomtatása " -"közben, hogy eltávolítsa a látható varratokat. Ez az opció egyetlen " -"kerületet igényel, kitöltés, felső szilárd rétegek és támaszanyag nélkül. " -"Továbbra is beállíthat tetszőleges számú alsó tömör réteget, valamint " -"szoknya-/karima hurkokat. Egynél több objektum nyomtatásakor nem fog működni." +"Ez a funkció fokozatosan megemeli a Z értéket az egyfalú objektum nyomtatása " +"közben, hogy eltávolítsa a látható varratokat. Ez az opció egyetlen kerület, " +"kitöltés, felső tömör rétegek és támasztóanyag nélkül. Továbbra is " +"beállíthat tetszőleges számú alsó tömör réteget, valamint szoknya-/" +"szegélyhurkokat. Egynél több objektum nyomtatásakor nem fog működni." msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" -"Ez a fájl nem tölthető be egyszerű módban. Szeretne haladó módra váltani?" +"Ez a fájl nem tölthető be egyszerű üzemmódban. Szeretne haladó módra váltani?" msgid "" "This file contains several objects positioned at multiple heights.\n" @@ -8323,60 +11980,180 @@ msgid "" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" -"Ez a firmware hexa fájl nem egyezik a nyomtató modelljével.\n" -"A hexa fájl ehhez a nyomtatóhoz való: %s\n" -"Az alábbi nyomató van csatlakoztatva: %s\n" +"Ez a firmware hex fájl nem felel meg a nyomtató modelljének.\n" +"A hexafájl a következőkhöz készült: %s\n" +"A nyomtató jelentése: %s\n" "\n" -"Mindenképpen folytatni akarja és feltölti a fájlt?\n" +"Szeretné folytatni és mégis feltölteni ezt a hexafájlt?\n" "Kérjük, csak akkor folytassa, ha biztos benne, hogy ez a helyes lépés." msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" -"Ez a jelölő engedélyezi az automatikus hűtési logikát, amely a nyomtatási " +"Ez a jelző engedélyezi az automatikus hűtési logikát, amely a nyomtatási " "sebességet és a ventilátor sebességét a rétegnyomtatási időnek megfelelően " "állítja be." +msgid "This flag enforces a retraction whenever a Z move is done (before it)." +msgstr "" +"Ez a jelző visszavonást kényszerít, amikor egy Z lépés történik (előtte)." + +msgid "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders.\n" +"Note that as a wipe only happens when there is a retraction, the 'only " +"retract when crossing perimeters' print setting can greatly reduce the " +"number of wipes." +msgstr "" +"Ez a jelző a fúvókát visszahúzás közben mozgatja, hogy a szivárgó " +"extrudereknél minimalizálja a lehetséges foltok kialakulását.\n" +"Vegye figyelembe, hogy mivel a törlés csak akkor történik, ha visszahúzás " +"történik, a 'csak a peremek keresztezésekor visszahúzás' nyomtatási " +"beállítás jelentősen csökkentheti a törlések számát." + msgid "This G-code will be used as a code for the color change" -msgstr "Ezt a G-kódot a színváltás kódjaként fogjuk használni" +msgstr "Ez a G-kód lesz a színváltás kódjaként használva" msgid "This G-code will be used as a code for the pause print" -msgstr "Ezt a G-kódot a nyomtatás szüneteltetés kódjaként fogjuk használni" +msgstr "Ez a G-kód lesz a nyomtatási szünet kódjaként használva" msgid "This G-code will be used as a custom code" msgstr "Ezt a G-kódot egyéni kódként fogjuk használni" +msgid "" +"This increases the size of the object by a certain amount to have enough " +"plastic to mill. You can set a number of mm or a percentage of the " +"calculated optimal extra width (from flow calculation)." +msgstr "" +"Ezáltal a tárgy mérete egy bizonyos mennyiséggel megnő, hogy elegendő " +"műanyag maradjon a maráshoz. Beállíthat egy mm-es számot vagy a számított " +"optimális extra szélesség százalékát (az áramlási számításból)." + msgid "This is a default preset." -msgstr "Ez az alapértelmezett előbeállítás." +msgstr "Ez egy alapértelmezett előbeállítás." msgid "This is a relative measure of support points density." -msgstr "Ez a támasztási pontok sűrűségének relatív mérőszáma." +msgstr "Ez a támogatási pontok sűrűségének relatív mérőszáma." msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" -"Ez egy egy-extruderes, többféle anyagot használó nyomtató, az összes " -"extruder átmérője az új értékre lesz beállítva. Szeretné folytatni?" +"Ez egy egy extruderes, több anyagból készült nyomtató, az összes extruder " +"átmérője az új értékre lesz beállítva. Szeretné folytatni?" msgid "This is a system preset." -msgstr "Ez a rendszer előbeállítás." +msgstr "Ez egy rendszerbeállítás." + +msgid "This is only used in Slic3r interface as a visual help." +msgstr "Ezt csak a Slic3r felületen használják vizuális segítségként." msgid "This is only used in the Slic3r interface as a visual help." msgstr "Ezt csak a Slic3r felületén használjuk vizuális segítségként." +msgid "This is the color that will be enforced on objects in the thumbnails." +msgstr "" +"Ez az a szín, amely a miniatűrökben lévő objektumokon érvényesülni fog." + +msgid "" +"This is the DEFAULT extrusion spacing. It's convert to a width and this " +"width can be used to REPLACE 0-width fields. It's useless when all width " +"fields have a value.Like Default extrusion width but spacing is the distance " +"between two lines (as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Ez a DEFAULT extrudálási távolság. Szélességgé konvertálódik, és ez a " +"szélesség használható a 0 szélességű mezők Pótlására. Használhatatlan, ha " +"minden szélesség mezőnek van értéke. mint az alapértelmezett extrudálási " +"szélesség, de a távolság a két vonal közötti távolság (mivel egy kicsit " +"átfedik egymást, ez nem ugyanaz).\n" +"Vagy a 'Spacing', vagy a 'Width' értéket állíthatod be; a másikat a rendszer " +"kiszámítja, a perem 'Overlap' százalékos értékeit és az alapértelmezett " +"rétegmagasságot használva." + +msgid "This is the diameter of your cutting tool." +msgstr "Ez a vágószerszám átmérője." + msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "Ez az extruder fúvókájának átmérője (például: 0,5, 0,35 stb.)" +msgid "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. \n" +"Can be a % of the nozzle diameter.\n" +"If set to 0, layer height is limited to 75% of the nozzle diameter." +msgstr "" +"Ez a legnagyobb nyomtatható rétegmagasság ennél az extrudernél, amely a " +"változó rétegmagasság és a támasztóréteg magasságának felső határértékeként " +"szolgál. A maximális ajánlott rétegmagasság az extrudálás szélességének " +"75%-a az ésszerű rétegközi tapadás elérése érdekében. \n" +"Lehet a fúvóka átmérőjének %-a.\n" +"Ha 0-ra van állítva, a rétegmagasság a fúvókaátmérő 75%-ára korlátozódik." + +msgid "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm.\n" +"Can be a % of the nozzle diameter." +msgstr "" +"Ez a legalacsonyabb nyomtatható rétegmagasság ennél az extrudernél, és " +"korlátozza a változó rétegmagasság felbontását. A tipikus értékek 0,05 mm és " +"0,1 mm között vannak.\n" +"Lehet a fúvóka átmérőjének %-a." + +msgid "" +"This is the percentage of the flow that is used for the second ironing pass. " +"Typical 10-20%. Should not be higher than 20%, unless you have your top " +"extrusion width greatly superior to your nozzle width. A value too low and " +"your extruder will eat the filament. A value too high and the first pass " +"won't print well." +msgstr "" +"Ez az áramlásnak az a százaléka, amelyet a második nyomtatási menetre " +"használnak fel. Általában 10-20%. Nem lehet 20%-nál nagyobb, kivéve, ha a " +"felső extrudálás szélessége jóval nagyobb, mint a fúvóka szélessége. Egy túl " +"alacsony érték és az extruder megeszi a szálakat. Túl magas érték esetén az " +"első menet nem fog jól nyomtatni." + +msgid "" +"This is the rounding error of the input object. It's used to align points " +"that should be in the same line.\n" +"Set zero to disable." +msgstr "" +"Ez a bemeneti objektum kerekítési hibája. Olyan pontok igazítására szolgál, " +"amelyeknek egy vonalban kellene lenniük.\n" +"A kikapcsoláshoz állítson be nullát." + +msgid "" +"This is the width of the ironing pass, in a % of the top infill extrusion " +"width, should not be more than 50% (two times more lines, 50% overlap). It's " +"not necessary to go below 25% (four times more lines, 75% overlap). \n" +"If you have problems with your ironing process, don't forget to look at the " +"flow->above bridge flow, as this setting should be set to min 110% to let " +"you have enough plastic in the top layer. A value too low will make your " +"extruder eat the filament." +msgstr "" +"Ez a nyomtatási menet szélessége, a felső kitöltés extrudálás szélességének " +"%-ában, nem lehet több mint 50% (kétszer több vonal, 50%-os átfedés). Nem " +"szükséges 25% alá menni (négyszer több vonal, 75%-os átfedés). \n" +"Ha problémái vannak a vasalással, ne felejtse el megnézni a áramlás->híd " +"feletti áramlás-t, mivel ezt a beállítást min. 110%-ra kell állítani, hogy " +"elegendő műanyag legyen a felső rétegben. A túl alacsony értéktől az " +"extruder megeszi a filamentet." + msgid "This is wipe tower layer" msgstr "Ez egy törlőtorony réteg" msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools. " -msgstr "Ez a mátrix bármely adott szerszámpár esetében leírja az új filament tisztításához szükséges, a törlőtoronyba töltenő térfogatokat (köbmilliméterben). " +msgstr "" +"Ez a mátrix bármely adott szerszámpár esetében leírja a törlőtoronyban lévő " +"új szálak tisztításához szükséges térfogatokat (köbmilliméterben). " msgid "" "This may cause problems in g-code visualization and printing time estimation." @@ -8384,11 +12161,32 @@ msgstr "" "Ez problémákat okozhat a g-kód megjelenítésében és a nyomtatási idő " "becslésében." +msgid "" +"This offset wil be added to all fan values set in the filament properties. " +"It won't make them go higher than 100% nor lower than 0%." +msgstr "" +"Ez az eltolás hozzáadódik a nyomtatószál tulajdonságaiban beállított összes " +"ventilátorértékhez. Ez nem fogja őket 100%-nál magasabbra és 0%-nál " +"alacsonyabbra állítani." + +msgid "" +"This offset will be added to all extruder temperatures set in the filament " +"settings.\n" +"Note that you should set 'M104 S{first_layer_temperature{initial_extruder} + " +"extruder_temperature_offset{initial_extruder}}'\n" +"instead of 'M104 S{first_layer_temperature}' in the start_gcode" +msgstr "" +"Ez az eltolás hozzáadódik az izzószál-beállításokban beállított összes " +"extruder-hőmérséklethez.\n" +"Vegye figyelembe, hogy az „M104 S{first_layer_temperature{initial_extruder} " +"+ extruder_temperature_offset{initial_extruder}}” értéket kell beállítania.\n" +"az „M104 S{first_layer_temperature}” helyett a start_gcode-ban" + msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" -"Ez a művelet nem visszavonható.\n" +"Ez a művelet visszafordíthatatlan.\n" "Akarja folytatni?" msgid "" @@ -8397,10 +12195,10 @@ msgid "" "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" -"Ez az opció beállítja az egyes rétegeknél létrehozandó kerületek számát. " -"Vegye figyelembe, hogy a Slic3r automatikusan megnövelheti ezt a számot, ha " -"olyan ferde felületet észlel, amely számára előnyös a nagyobb számú kerület, " -"amennyiben az Extra kerület opció engedélyezve van." +"Ez az opció beállítja az egyes rétegeknél létrehozandó peremterületek " +"számát. Vegye figyelembe, hogy a Slic3r automatikusan megnövelheti ezt a " +"számot, ha olyan lejtős felületeket észlel, amelyeknek előnyös a nagyobb " +"számú kerület, ha az Extra kerületek opció engedélyezve van." msgid "" "This option will drop the temperature of the inactive extruders to prevent " @@ -8409,33 +12207,278 @@ msgid "" msgstr "" "Ez az opció csökkenti az inaktív extruderek hőmérsékletét, hogy " "megakadályozza a szivárgást. Automatikusan engedélyezi a magas szoknyát, és " -"az extrudereket a szoknyán kívülre helyezi a hőmérséklet változtatás idejére." +"a hőmérséklet változásakor az extrudereket a szoknyán kívülre helyezi." + +msgid "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, this slows " +"down the G-code generation due to the multiple checks involved." +msgstr "" +"Ez a lehetőség a födémek alátámasztásához ténylegesen szükséges területekre " +"korlátozza a kitöltést (belső támasztóanyagként működik). Ha engedélyezve " +"van, ez lelassítja a G-kód generálását a többszörös ellenőrzés miatt." msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "" -"Ez az opció felcseréli kerület és a kitöltés nyomtatási sorrendjét, így az " -"utóbbi lesz az első." +"Ez az opció megváltoztatja a kerületek és a kitöltés nyomtatási sorrendjét, " +"és ez utóbbi lesz az első." + +msgid "" +"This parameter grows the bridged solid infill layers by the specified mm to " +"anchor them into the sparse infill and over the perimeters below. Put 0 to " +"deactivate it. Can be a % of the width of the external perimeter." +msgstr "" +"Ez a paraméter a megadott mm-rel növeli az áthidalt tömör kitöltési " +"rétegeket, hogy azokat a ritkás kitöltésbe és az alatta lévő kerületek fölé " +"rögzítse. A kikapcsoláshoz tegye be a 0 értéket. Lehet a külső kerület " +"szélességének %-a." + +msgid "" +"This parameter grows the top/bottom/solid layers by the specified mm to " +"anchor them into the sparse infill and support the perimeters above. Put 0 " +"to deactivate it. Can be a % of the width of the perimeters." +msgstr "" +"Ez a paraméter a felső/alsó/szilárd rétegeket a megadott mm-rel növeli, hogy " +"a ritkás kitöltésbe rögzítse őket, és megtámassza a fenti kerületeket. A " +"kikapcsoláshoz tegye be a 0 értéket. Lehet a kerületek szélességének %-a." msgid "This printer will be shown in the presets list as" msgstr "" "Ez a nyomtató az előbeállítások listájában a következőképpen jelenik meg" +msgid "" +"This sets the end of the threshold for small perimeter length. Every " +"perimeter loop lower than this will see their speed reduced a bit, from " +"their normal speed at this length down to small perimeter speed.\n" +"Can be a mm or a % of the nozzle diameter." +msgstr "" +"Ez határozza meg a kis kerületi hosszra vonatkozó küszöbérték végét. Minden " +"ennél alacsonyabb kerületi hurok esetében a sebesség egy kicsit csökken, a " +"normál sebességről ezen a hosszon a kis kerületi sebességre.\n" +"Lehet egy mm vagy a fúvóka átmérőjének egy %-a." + +msgid "" +"This sets the threshold for small perimeter length. Every loop with a length " +"lower than this will be printed at small perimeter speed\n" +"Can be a mm value or a % of the nozzle diameter." +msgstr "" +"Ez határozza meg a kis kerület hosszának küszöbértékét. Minden olyan hurok, " +"amelynek hossza ennél kisebb, kis kerületi sebességgel lesz kinyomtatva.\n" +"Lehet mm-es érték vagy a fúvóka átmérőjének %-a." + +msgid "" +"This setting allows you to modify the time estimation by a % amount. As " +"Slic3r only uses the Marlin algorithm, it's not precise enough if another " +"firmware is used." +msgstr "" +"Ez a beállítás lehetővé teszi, hogy az időbecslést %-ban módosítsa. Mivel a " +"Slic3r csak a Marlin algoritmust használja, nem elég pontos, ha más firmware-" +"t használ." + +msgid "" +"This setting allows you to reduce the overlap between the perimeters, to " +"reduce the impact of the perimeters' artifacts. 100% means that no gap is " +"left, and 0% means that perimeters are not touching each other anymore.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Ez a beállítás lehetővé teszi a peremterületek közötti átfedés csökkentését, " +"hogy csökkentse a peremterületek leletének hatását. A 100% azt jelenti, hogy " +"nem marad rés, a 0% pedig azt, hogy a kerületek már nem érnek egymáshoz.\n" +"Ez nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Ha nincs " +"rá szükség, eltávolítható." + +msgid "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width.\n" +"Don't put a value higher than 50% (of the perimeter width), as it will fuse " +"with it and follow the perimeter." +msgstr "" +"Ez a beállítás további átfedést alkalmaz a kitöltés és a kerületek között a " +"jobb tapadás érdekében. Elméletileg erre nincs szükség, de a visszacsapás " +"hézagokat okozhat. Ha százalékban fejezzük ki (példa: 15%), akkor a kerületi " +"extrudálási szélességre számítjuk.\n" +"Ne adjon meg 50%-nál nagyobb értéket (a kerület szélességének), mert az " +"összeolvad vele és követi a kerületet." + +msgid "" +"This setting control by how much the speed can be reduced to increase the " +"layer time. It's a maximum reduction, so a lower value makes the minimum " +"speed higher. Set to 90% if you don't want the speed to go below 10% of the " +"current speed.\n" +"Set zero to disable" +msgstr "" +"Ez a beállítás szabályozza, hogy mennyivel csökkenthető a sebesség a " +"rétegezési idő növelése érdekében. Ez egy maximális csökkentés, így egy " +"alacsonyabb érték a minimális sebességet növeli. Állítsa 90%-ra, ha nem " +"szeretné, hogy a sebesség az aktuális sebesség 10%-a alá csökkenjen.\n" +"Adjon meg nulla értéket a letiltáshoz" + msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" "Ez a beállítás szabályozza a szeletek/rétegek magasságát (és így a teljes " -"számát). A vékonyabb rétegek nagyobb pontosságot adnak, de több időt vesz " +"számot). A vékonyabb rétegek nagyobb pontosságot adnak, de több időt vesz " "igénybe a nyomtatás." +msgid "" +"This setting controls the height of last object layers to put the last layer " +"at the exact highest height possible. Experimental." +msgstr "" +"Ez a beállítás szabályozza az utolsó objektumrétegek magasságát, hogy az " +"utolsó réteg pontosan a lehető legmagasabbra kerüljön. Kísérleti." + +msgid "" +"This setting is used to set the maximum speed when extruding inside the wipe " +"tower (use M220). In %, set 0 to disable and use the Filament type instead.\n" +"If disabled, these filament types will have a defaut value of:\n" +" - PVA: 80% to 60%\n" +" - SCAFF: 35%\n" +" - FLEX: 35%\n" +" - OTHERS: 100%\n" +"Note that the wipe tower reset the speed at 100% for the unretract in any " +"case.\n" +"If using marlin, M220 B/R is used to save the speed override before the wipe " +"tower print." +msgstr "" +"Ez a beállítás a maximális sebesség beállítására szolgál a törlőtoronyban " +"történő extrudáláskor (használja az M220-at). A %-ban állítsa be a 0 értéket " +"a letiltáshoz, és használja helyette a Filament type (Szál típus) értéket.\n" +"Ha ki van kapcsolva, ezek a szál típusok defaut értéket kapnak:\n" +" - PVA: 80% és 60% között\n" +" - SCAFF: 35%\n" +" - FLEX: 35%\n" +" - EGYÉB: 100%\n" +"Vegye figyelembe, hogy a törlőtorony minden esetben 100%-ra állítja vissza a " +"sebességet a visszahúzásnál.\n" +"Marlin használata esetén az M220 B/R-t kell használni a sebesség " +"felülírásának mentésére a törlőtorony nyomtatása előtt." + +msgid "" +"This setting may slightly degrade the quality of your external perimeter, in " +"exchange for a better bonding between perimeters.Use it if you have great " +"difficulties with perimeter bonding, for example with high temperature " +"filaments.\n" +"This percentage is the % of overlap between perimeters, a bit like " +"perimeter_overlap and external_perimeter_overlap, but in reverse. You have " +"to set perimeter_overlap and external_perimeter_overlap to 100%, or this " +"setting has no effect. 0: no effect, 50%: half of the nozzle will be over an " +"already extruded perimeter while extruding a new one, unless it's an " +"external one).\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Ez a beállítás kissé ronthatja a külső kerület minőségét, cserébe a kerület " +"közötti jobb kötésért.Akkor használja, ha nagy nehézségei vannak a " +"kerületkötéssel, például magas hőmérsékletű szálak esetén.\n" +"Ez a százalék a periméterek közötti átfedés százalékos aránya, kicsit olyan, " +"mint a perimeter_overlap és a external_perimeter_overlap, de fordítva. A " +"perimeter_overlap és a external_perimeter_overlap értékét 100%-ra kell " +"állítani, különben ennek a beállításnak nincs hatása. 0: nincs hatása, 50%: " +"a fúvóka fele egy már extrudált kerület fölött lesz, miközben egy újat " +"extrudál, kivéve, ha külső kerületről van szó).\n" +"Ez nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Lehet, " +"hogy eltávolításra kerül, ha nincs rá szükség." + +msgid "" +"This setting represents the base fan speed this filament needs, or at least " +"the minimum PWM your fan needs to work." +msgstr "" +"Ez a beállítás jelenti a ventilátor alapsebességét, amelyre ennek az " +"nyomtatószálnak szüksége van, vagy legalábbis azt a minimális PWM-et, " +"amelyre a ventilátornak szüksége van a működéshez." + +msgid "" +"This setting represents the maximum speed of your fan, used when the layer " +"print time is Very short." +msgstr "" +"Ez a beállítás a ventilátor maximális sebességét jelenti, amelyet akkor " +"használ, ha a rétegnyomtatási idő Nagyon rövid." + +msgid "" +"This setting represents the minimum mm² for a gapfill extrusion to be " +"created.\n" +"Can be a % of (perimeter width)²" +msgstr "" +"Ez a beállítás jelenti a minimális mm²-t a létrehozandó hézagkitöltő " +"extrudáláshoz.\n" +"Lehet a (kerületi szélesség)² %-ában." + +msgid "" +"This setting restricts the post-process milling to a certain height, to " +"avoid milling the bed. It can be a mm or a % of the first layer height (so " +"it can depend on the object)." +msgstr "" +"Ez a beállítás az utólagos marást egy bizonyos magasságra korlátozza, hogy " +"elkerülje az ágy marását. Ez lehet mm vagy az első réteg magasságának %-a " +"(tehát az objektumtól függhet)." + +msgid "" +"This setting will ensure that all 'overlap' are not higher than this value. " +"This is useful for filaments that are too viscous, as the line can't flow " +"under the previous one." +msgstr "" +"Ez a beállítás biztosítja, hogy az összes \"átfedés\" ne legyen nagyobb " +"ennél az értéknél. Ez a túlságosan viszkózus szálaknál hasznos, mivel a " +"vonal nem tud az előző alatt folyni." + +msgid "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode (and after any toolchange to this filament in case of multi-material " +"printers). This is used to override settings for a specific filament. If " +"Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " +"will not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 S" +"{first_layer_temperature}\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." +msgstr "" +"Ez az indítási eljárás az elején, a nyomtató indítási G-kódja után (és több " +"anyagból készült nyomatok esetén az adott szálra történő szerszámváltás " +"után) kerül beillesztésre. Ez egy adott szálra vonatkozó beállítások " +"felülbírálására szolgál. Ha a Slic3r az M104, M109, M140 vagy M190 kódokat " +"észleli az egyéni kódokban, akkor ezek a parancsok nem lesznek automatikusan " +"előfűzve, így Ön szabadon testre szabhatja a fűtési parancsok és egyéb " +"egyéni műveletek sorrendjét. Ne feledje, hogy minden Slic3r-beállításhoz " +"használhat helyőrző változókat, így bárhová beírhat egy \"M109 " +"S{first_layer_temperature}\" parancsot. Ha több extruderrel rendelkezik, a G-" +"kód az extruder sorrendjében kerül feldolgozásra." + +msgid "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder has just started heating, but before " +"extruder has finished heating. If Slic3r detects M104 or M190 in your custom " +"codes, such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S{first_layer_temperature}\" command wherever you want.\n" +" placeholders: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, bounding_box" +"[minx,miny,maxx,maxy]" +msgstr "" +"Ez az indítási eljárás az elején kerül beiktatásra, miután az ágy elérte a " +"célhőmérsékletet és az extruder épp elkezdte a fűtést, de még a befejezése " +"előtt van. Ha a Slic3r az M104 vagy M190 parancsot észleli az egyéni " +"kódokban, akkor ezek a parancsok nem lesznek automatikusan előre téve, így " +"Ön szabadon testre szabhatja a fűtési parancsok és más egyéni műveletek " +"sorrendjét. Ne feledje, hogy minden Slic3r-beállításhoz használhat helyőrző " +"változókat, így bárhová beírhat egy \"M109 S{first_layer_temperature}\" " +"parancsot.\n" +" helyőrző: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, " +"bounding_box[minx,miny,maxx,maxy]" + msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "" -"Ez a karakterlánc a TömörítésPárbeszéd ablakban szerkeszthető, és a " -"tömörítéssel kapcsolatos paramétereket tartalmaz." +"Ezt a karakterláncot a RammingDialog szerkeszti, és a döngölésre jellemző " +"paramétereket tartalmazza." msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -8444,16 +12487,18 @@ msgid "" "print bed, set this to -0.3 (or fix your endstop)." msgstr "" "Ez az érték hozzáadódik (vagy kivonásra kerül) az összes Z koordinátához a " -"kimeneti G-kódban. A Z tengely végállás pozíciójának kompenzálására szolgál: " +"kimeneti G-kódban. A rossz Z végállás pozíciójának kompenzálására szolgál: " "például ha a végállás nullája valójában 0,3 mm-re hagyja a fúvókát a " -"tárgyasztal felett, akkor állítsa ezt az értéke -0,3-ra (vagy javítsa meg a " -"végállást)." +"nyomtatási ágytól, állítsa ezt -0,3-ra (vagy javítsa a végállást)." msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below. " -msgstr "Ez a vektor tárolja a törlőtornyon használt egyes szerszámok közötti váltáshoz szükséges mennyiségeket. Ezek az értékek az alábbi teljes öblítési mennyiségek létrehozásának egyszerűsítésére szolgálnak. " +msgstr "" +"Ez a vektor megtakarítja a törlőtornyon használt egyes szerszámok közötti " +"váltáshoz szükséges mennyiségeket. Ezek az értékek az alábbi teljes " +"tisztítási kötetek létrehozásának egyszerűsítésére szolgálnak. " msgid "" "This version of %s is not compatible with currently installed configuration " @@ -8466,13 +12511,13 @@ msgid "" "existing configuration before installing files compatible with this %s." msgstr "" "A %s ezen verziója nem kompatibilis a jelenleg telepített konfigurációs " -"csomagokkal. \n" -"Ez valószínűleg azért történt, mert egy régebbi %s-t futtatott azután, hogy " -"egy korábban újabbat használt.\n" +"csomagokkal.\n" +"Ez valószínűleg egy régebbi %s futtatása miatt történt, miután egy újabbat " +"használt.\n" "\n" "Vagy kiléphet a %s-ből, és megpróbálhatja újra egy újabb verzióval, vagy " -"újra lefuttathatja az eredeti konfigurációt. Ezzel létrehoz egy biztonsági " -"mentést a meglévő konfigurációról, mielőtt telepítené az ezzel a %s-szel " +"újra lefuttathatja az eredeti konfigurációt. Ezzel egy biztonsági mentést " +"készít a meglévő konfigurációról, mielőtt telepítené az ezzel a %s-szel " "kompatibilis fájlokat." msgid "" @@ -8480,9 +12525,9 @@ msgid "" "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" -"Ez gammakorrekciót alkalmaz a raszterizált 2D sokszögekre. A nulla gamma " -"korrekció a középső gammaérték küszöbként való alkalmazását jelenti. Ez a " -"viselkedés megszünteti az élsimítást anélkül, hogy a sokszögek lyukai " +"Ez gammakorrekciót alkalmaz a raszterizált 2D poligonokra. A nulla " +"gammaérték a középső küszöbértékkel történő küszöbértékelést jelenti. Ez a " +"viselkedés kiküszöböli az antialiasinget anélkül, hogy a poligonok lyukai " "elvesznének." msgid "Threads" @@ -8492,10 +12537,19 @@ msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" -"A szálak a hosszú futási idejű feladatok párhuzamosítására szolgálnak. A " -"szálak optimális száma valamivel a rendelkezésre álló magok/processzorok " +"A szálak a hosszú futású feladatok párhuzamosítására szolgálnak. Az " +"optimális szálak száma valamivel a rendelkezésre álló magok/processzorok " "száma felett van." +msgid "Threshold" +msgstr "Küszöbérték" + +msgid "Thumbnail color" +msgstr "Miniatűr színe" + +msgid "Thumbnails size" +msgstr "Miniatűrök mérete" + msgid "Tilt" msgstr "Billentés" @@ -8505,65 +12559,90 @@ msgstr "Billentési idő" msgid "Time" msgstr "Idő" +msgid "time" +msgstr "idő" + +msgid "Time estimation compensation" +msgstr "Időbecslés kompenzáció" + msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" -"Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " -"2.0) új filamentet tölt be a szerszámcsere során (a T kód végrehajtásakor). " -"Ezt az időt a G-kód időbecslő hozzáadja a teljes nyomtatási időhöz." +"Az idő, amíg a nyomtató firmware-je (vagy a Multi Material Unit 2.0) új " +"izzószálat tölt be a szerszámcsere során (a T kód végrehajtásakor). Ezt az " +"időt a G-kód időbecslő hozzáadja a teljes nyomtatási időhöz." msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" -"Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " -"2.0) az előző Filamenet kiüríti a szerszámcsere során (a T kód " -"végrehajtásakor). Ezt az időt a G-kód időbecslő hozzáadja a teljes " -"nyomtatási időhöz." +"Az az idő, amíg a nyomtató firmware (vagy a Multi Material Unit 2.0) " +"szerszámcsere közben (a T kód végrehajtásakor) kitölti a szálat. Ezt az időt " +"a G-kód időbecslője hozzáadja a teljes nyomtatási időhöz." msgid "Time of the fast tilt" -msgstr "A gyors billenés időtartama" +msgstr "Gyors dőlés ideje" msgid "Time of the slow tilt" -msgstr "A lassú billentés időtartama" +msgstr "Lassú dőlés ideje" msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions. " -msgstr "A várakozási idő az filament kiürítése után. Segíthet megbízható szerszámcserét elérni rugalmas anyagok esetén, amelyeknek több időre lehet szükségük ahhoz, hogy az eredeti méretükre zsugorodjanak. " +msgstr "" +"Várakozási idő az izzószál kitöltése után. Segíthet megbízható " +"szerszámcserékhez jutni olyan rugalmas anyagok esetében, amelyeknek több " +"időre van szükségük ahhoz, hogy az eredeti méretre zsugorodjanak. " msgid "to" -msgstr "hoz_" +msgstr "-nak, -nek" + +msgid "" +"To avoid visible seam, the extrusion can be stoppped a bit before the end of " +"the loop.\n" +"Can be a mm or a % of the current extruder diameter." +msgstr "" +"A látható varrat elkerülése érdekében az extrudálás egy kicsit a hurok vége " +"előtt megállítható.\n" +"Ez lehet mm vagy az extruder aktuális átmérőjének egy %-a." msgid "To do that please specify a new name for the preset." msgstr "Ehhez adjon meg egy új nevet az előbeállításnak." +msgid "" +"To further reduce stringing, it can be helpful to set a lower temperature " +"just prior to extracting filament from the hotend." +msgstr "" +"A felfűzés további csökkentése érdekében hasznos lehet alacsonyabb " +"hőmérsékletet beállítani közvetlenül a fűtőfejből való kivonás előtt." + msgid "" "To specify the system certificate store manually, please set the %1% " "environment variable to the correct CA bundle and restart the application." msgstr "" "A rendszer tanúsítványtárolójának manuális megadásához állítsa a %1% " -"környezeti változót a megfelelő CA csomagra, és indítsa újra az alkalmazást." +"környezeti változót a megfelelő hitelesítésszolgáltatói csomagra, és indítsa " +"újra az alkalmazást." msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"Egyéni CA fájl használatához kérjük, importálja a CA fájlt a " -"Tanúsítványtárolóba / Kulcstárba." +"Egyéni hitelesítésszolgáltatói fájl használatához kérjük, importálja a " +"hitelesítésszolgáltatói fájlt a tanúsítványtárolóba / kulcstárba." msgid "Toggle %c axis mirroring" -msgstr "%c tengely tükrözésének váltása" +msgstr "Bekapcsolt %c tengely tükrözése" msgid "too many files" msgstr "túl sok fájl" msgid "Too many overlapping holes." -msgstr "Túl sok átfedő furat." +msgstr "Túl sok az egymást átfedő lyuk." msgid "Tool" msgstr "Eszköz" @@ -8572,41 +12651,86 @@ msgid "Tool #" msgstr "Szerszám #" msgid "Tool change G-code" -msgstr "G-kód Szerszám Váltás" +msgstr "Szerszámcsere G-kód" msgid "Tool changes" -msgstr "Eszköz váltások" +msgstr "Szerszámváltások" msgid "Tool marker" -msgstr "Szerszám jelölő" +msgstr "Szerszám jelölés" + +msgid "Tool name" +msgstr "Eszköz neve" + +msgid "Tool offset" +msgstr "Szerszám eltolás" msgid "Tool position" -msgstr "Szerszám pozíció" +msgstr "Eszköz pozíció" msgid "Tool type" msgstr "Eszköz típus" +msgid "Tool z lift" +msgstr "Szerszám Z emelés" + +msgid "Tool z offset" +msgstr "Szerszám z eltolás" + +msgid "Tool/C" +msgstr "Eszköz/C" + msgid "Toolchange parameters with single extruder MM printers" msgstr "" "Szerszámváltási paraméterek egy extruderes Több Anyagos (MM) nyomtatónál" +msgid "Toolchange part fan speed" +msgstr "Szerszámcsere tárgyhűtő sebessége" + +msgid "Toolchange temperature" +msgstr "Fejcsere hőmérséklet" + +msgid "Toolchange temperature enabled" +msgstr "Fejcsere hőmérséklet engedélyezve" + msgid "Top" -msgstr "Felül" +msgstr "Felső" msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" -"Felső/alsó héj vastagságra vonatkozó tipp: Nem érhető el az érvénytelen " +"Felső/alsó héjvastagság tipp: Nem áll rendelkezésre az érvénytelen " "rétegmagasság miatt." +msgid "Top fan speed" +msgstr "Max ventilátor sebesség" + +msgid "Top fill" +msgstr "Felső kitöltés" + +msgid "Top fill flow ratio" +msgstr "Felső kitöltési áramlási arány" + +msgid "Top flow calibration" +msgstr "Felső áramlási kalibráció" + msgid "Top interface layers" msgstr "Felső interfész rétegek" msgid "Top is open." -msgstr "Felső rész nyitott." +msgstr "Felül nyitott." + +msgid "Top layers" +msgstr "Felső rétegek" msgid "Top shell is %1% mm thick for layer height %2% mm." -msgstr "A felső héj %1% mm vastag a %2% mm rétegmagassághoz." +msgstr "A felső héj vastagsága %1% mm, rétegmagassága %2% mm." + +msgid "Top solid " +msgstr "Felső tömör " + +msgid "Top solid" +msgstr "Felső tömör" msgid "Top solid infill" msgstr "Felső tömör kitöltés" @@ -8617,11 +12741,17 @@ msgstr "felső tömör kitöltés" msgid "Top solid layers" msgstr "Felső tömör rétegek" +msgid "Top solid spacing" +msgstr "Felső tömör távolság" + +msgid "Top solid speed" +msgstr "Felső tömör sebesség" + msgid "Top View" msgstr "Felülnézet" msgid "Topmost surface only" -msgstr "Csak a legfelső felület" +msgstr "Csak a felső felület" msgid "Total" msgstr "Összes" @@ -8630,47 +12760,59 @@ msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" -"A teljes öblítési térfogatot az alábbi két érték összegzésével kell " -"kiszámítani, attól függően, hogy mely szerszámok vannak kiürítve/betöltve." +"A teljes tisztítási térfogatot az alábbi két érték összegzésével kell " +"kiszámítani, attól függően, hogy mely szerszámok vannak betöltve és kiadva." msgid "Total rammed volume" msgstr "Teljes tömörített térfogat" msgid "Total ramming time" -msgstr "Teljes tömörítési idő" +msgstr "Teljes betömési idő" msgid "Transfer" -msgstr "Átvitel" +msgstr "Áthelyezés" msgid "Transfer the selected options to the newly selected preset \"%1%\"." msgstr "" -"A kiválasztott beállítások átvitele az újonnan kijelölt \"%1%\" " +"A kiválasztott beállítások átvitele az újonnan kiválasztott \"%1%\" " "előbeállításba." msgid "Transfer the selected settings to the newly selected preset." msgstr "" -"A kiválasztott beállítások átvitele az újonnan kijelölt előbeállításba." +"A kiválasztott beállítások átvitele az újonnan kiválasztott előbeállításba." msgid "Translate" -msgstr "Eltolás" +msgstr "Lefordít" msgid "Translation" -msgstr "Eltolás" +msgstr "Fordítás" msgid "Travel" msgstr "Utazás" +msgid "Travel acceleration" +msgstr "Utazás gyorsítása" + +msgid "Travel cost" +msgstr "Utazási költség" + +msgid "Travel speed" +msgstr "Utazási sebesség" + msgid "Triangles" -msgstr "Háromszögek" +msgstr "Háromszög" msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" -"Próbálja megjavítani a nem 'manifold' hálót (ez az opció implicit módon " +"Próbálja megjavítani a nem sokrétű hálót (ez az opció implicit módon " "hozzáadódik, ha a modellt fel kell szeletelnünk a kért művelet " "végrehajtásához)." +msgid "Twisting" +msgstr "Csavarodás" + msgid "Type" msgstr "Típus" @@ -8690,17 +12832,17 @@ msgid "" "Unable to load the following shaders:\n" "%s" msgstr "" -"Nem sikerült betölteni a következő Shaderekett:\n" +"Nem sikerült betölteni a következő árnyékolókat:\n" "%s" msgid "Unable to reload:" -msgstr "Újratöltés sikertelen:" +msgstr "Nem lehet újratölteni:" msgid "Unable to replace with more than one volume" msgstr "Nem lehet egynél több térfogattal helyettesíteni" msgid "Undef" -msgstr "Nem definált" +msgstr "Definiálatlan" msgid "Undef category" msgstr "Nem definiált kategória" @@ -8709,10 +12851,10 @@ msgid "Undef group" msgstr "Nem definiált csoport" msgid "Undefined" -msgstr "Meghatározatlan" +msgstr "Definiálatlan" msgid "undefined error" -msgstr "ismeretlen hiba" +msgstr "definiálatlan hiba" msgid "Underflow" msgstr "Alulcsordulás" @@ -8722,8 +12864,8 @@ msgstr "Visszavonás" msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" -msgstr[0] "%1$d Művelet Visszavonása" -msgstr[1] "%1$d Művelet Visszavonása" +msgstr[0] "%1$d művelet visszavonása" +msgstr[1] "%1$d műveletek visszavonása" msgid "Undo / Redo is processing" msgstr "Visszavonás / Mégis folyamatban" @@ -8735,10 +12877,10 @@ msgid "Undo desktop integration was successful." msgstr "Az asztal integrációjának visszavonása sikeres volt." msgid "Undo History" -msgstr "Előzmények visszavonása" +msgstr "Visszavonás előzmények" msgid "unexpected decompressed size" -msgstr "váratlan kicsomagolt méret" +msgstr "váratlan dekomprimált méret" msgid "Unknown" msgstr "Ismeretlen" @@ -8750,16 +12892,16 @@ msgid "Unknown error occured during exporting G-code." msgstr "Ismeretlen hiba történt a G-kód exportálása közben." msgid "unloaded" -msgstr "kiürítve_" +msgstr "kiadott" msgid "Unloading speed" -msgstr "Kiürítési sebesség" +msgstr "Kiadási sebesség" msgid "Unloading speed at the start" -msgstr "Kiürítési sebesség kezdéskor" +msgstr "Kiadási sebesség induláskor" msgid "UNLOCKED LOCK" -msgstr "NYITOTT LAKAT" +msgstr "FELOLDOTT ZÁR" msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " @@ -8767,27 +12909,27 @@ msgid "" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" -"NYITOTT LAKAT ikon azt jelzi, hogy bizonyos beállítások módosultak, és nem " -"egyenlők az aktuális opciócsoport rendszer- (vagy alapértelmezett) " -"értékével.\n" -"Kattintson az aktuális opciócsoport összes beállításának visszaállításához a " -"rendszer (vagy az alapértelmezett) értékre." +"FELOLDOTT ZÁR ikon azt jelzi, hogy egyes beállítások megváltoztak, és nem " +"egyeznek meg az aktuális opciós csoport rendszer- (vagy alapértelmezett) " +"értékeivel.\n" +"Kattintson a gombra az aktuális opciós csoport összes beállításának a " +"rendszer (vagy alapértelmezett) értékekre történő visszaállításához." msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" -"NYITOTT LAKAT ikon azt jelzi, hogy az érték megváltozott, és nem egyenlő a " -"rendszer (vagy az alapértelmezett) értékkel.\n" -"Kattintson az aktuális érték visszaállításához a rendszer (vagy " -"alapértelmezett) értékre." +"FELOLDOTT ZÁR ikon azt jelzi, hogy az értéket megváltoztatták, és az nem " +"egyenlő a rendszer (vagy alapértelmezett) értékkel.\n" +"Kattintson a gombra az aktuális értéknek a rendszer (vagy alapértelmezett) " +"értékre történő visszaállításához." msgid "Unsaved Changes" msgstr "Nem Mentett Változások" msgid "Unselect gizmo or clear selection" -msgstr "Gizmo kijelölésének megszüntetése, vagy kijelölés megszüntetése" +msgstr "Gizmo kijelölésének megszüntetése vagy a kijelölés törlése" msgid "unsupported central directory size" msgstr "nem támogatott központi könyvtár méret" @@ -8808,7 +12950,7 @@ msgid "Unsupported OpenGL version" msgstr "Nem támogatott OpenGL verzió" msgid "Unsupported selection" -msgstr "Nem támogatott kijelölés" +msgstr "Nem támogatott kiválasztás" msgid "Untitled" msgstr "Névtelen" @@ -8820,7 +12962,7 @@ msgid "Update available" msgstr "Frissítés elérhető" msgid "Update built-in Presets automatically" -msgstr "Beépített Előbeállítások automatikus frissítése" +msgstr "Beépített elő-beállítások automatikus frissítése" msgid "Updates" msgstr "Frissítések" @@ -8829,8 +12971,8 @@ msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" -"A frissítések soha nem kerülnek telepítésre a felhasználó beleegyezése " -"nélkül, és soha nem írják felül a felhasználó egyéni beállításait." +"A frissítések soha nem kerülnek alkalmazásra a felhasználó beleegyezése " +"nélkül, és soha nem írják felül a felhasználó testreszabott beállításait." msgid "Updating" msgstr "Frissítés" @@ -8842,7 +12984,7 @@ msgid "Upload" msgstr "Feltöltés" msgid "Upload a firmware image into an Arduino based printer" -msgstr "Firmware feltöltése Arduino alapú nyomtatóra" +msgstr "Firmware kép feltöltése egy Arduino alapú nyomtatóba" msgid "Upload and Print" msgstr "Feltöltés és Nyomtatás" @@ -8857,7 +12999,7 @@ msgid "Upload not enabled on FlashAir card." msgstr "A FlashAir kártyán nincs engedélyezve a feltöltés." msgid "Upload to Printer Host with the following filename:" -msgstr "Feltöltés a Nyomtató gazdagépére a következő fájlnévvel:" +msgstr "Töltse fel a gazdagépre a következő fájlnévvel:" msgid "Uploading" msgstr "Feltöltés" @@ -8870,6 +13012,9 @@ msgstr "" "Használja a \"Lyukak bezárása\" opciót a modellen lévő összes lyuk " "bezárásához." +msgid "Use also for time estimate" +msgstr "Használja az időbecsléshez is" + msgid "Use another extruder" msgstr "Másik extruder használata" @@ -8877,90 +13022,134 @@ msgid "Use colors for axes values in Manipulation panel" msgstr "Használjon színeket a tengelyértékekhez a Manipuláció panelen" msgid "Use custom size for toolbar icons" -msgstr "Egyéni méretet használata az eszköztár ikonjaihoz" +msgstr "Egyéni méret használata az eszköztár ikonjaihoz" + +msgid "Use custom tooltip" +msgstr "Egyéni eszköztár használata" msgid "Use environment map" msgstr "Környezeti térkép használata" msgid "Use firmware retraction" -msgstr "Firmware visszahúzás használata" +msgstr "Firmware-es visszahúzás használata" msgid "Use for search" -msgstr "Kereséshez használja" +msgstr "Használja keresést" msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "Ha szükséges, használjon perjeleket ( / ) könyvtárelválasztóként." +msgstr "" +"Szükség esetén könyvtárelválasztóként használjon átlós írásjeleket ( / )." msgid "Use free camera" msgstr "Szabad kamera használata" msgid "Use inches" -msgstr "Inch használata" +msgstr "Hüvelyk használata" + +msgid "Use only as safeguards" +msgstr "Csak biztosítékként használható" + +msgid "" +"Use only one perimeter on first layer, to give more space to the top infill " +"pattern." +msgstr "" +"Csak egy kerületet használjon az első rétegen, hogy több hely maradjon a " +"felső kitöltési mintának." + +msgid "" +"Use only one perimeter on flat top surface, to give more space to the top " +"infill pattern." +msgstr "" +"Csak egy kerületet használjon sík felső felületen, hogy több hely maradjon a " +"felső kitöltési mintának." msgid "Use pad" -msgstr "Párna használata" +msgstr "Használjon padot" + +msgid "Use part fan to cool hotend" +msgstr "Használjon részventilátort a hotend hűtéséhez" msgid "Use perspective camera" -msgstr "Perspektivikus kamera használata" +msgstr "Perspektív kamera használata" msgid "Use relative E distances" msgstr "Relatív E távolságok használata" msgid "Use Retina resolution for the 3D scene" -msgstr "Retina felbontás használata 3D jelenethez" +msgstr "Retina felbontás használata a 3D jelenethez" msgid "Use system menu for application" msgstr "Rendszermenü használata az alkalmazáshoz" +msgid "" +"Use this option to set the axis letter associated with your printer's " +"extruder (usually E but some printers use A)." +msgstr "" +"Ezzel a lehetőséggel állíthatja be a nyomtató extruderéhez tartozó " +"tengelybetűt (általában E, de egyes nyomtatók A betűt használnak)." + msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "" "Ezzel a beállítással elforgathatja a támaszanyag mintázatát a vízszintes " -"síkon." +"síkban." msgid "Use volumetric E" -msgstr "Használjon volumetrikus E paramétert" +msgstr "Használjon volumetrikus E" msgid "used" -msgstr "használatban" +msgstr "használt" msgid "Used filament" msgstr "Felhasznált filament" msgid "Used Filament (g)" -msgstr "Felhasznált Filament (g)" +msgstr "Szálhasználat (g)" msgid "Used Filament (in)" -msgstr "Felhasznált Filament (in)" +msgstr "Szálhasználat (be)" msgid "Used Filament (in³)" -msgstr "Felhasznált Filament (in³)" +msgstr "Szálhasználat (be³)" msgid "Used Filament (m)" -msgstr "Felhasznált Filament (m)" +msgstr "Szálhasználat (m)" msgid "Used Filament (mm³)" -msgstr "Felhasznált Filament (mm³)" +msgstr "Szálhasználat (mm³)" msgid "Used Material (ml)" -msgstr "Felhasznált Anyag (ml)" +msgstr "Használt anyag (ml)" msgid "Used Material (unit)" -msgstr "Felhasznált Alapanyag (egység)" +msgstr "Használt anyag (egység)" msgid "User" msgstr "Felhasználó" msgid "User presets" -msgstr "Felhasználói előbeállítások" +msgstr "Felhasználói beállítások" + +msgid "usually not necessary to change this" +msgstr "általában nem szükséges ezt megváltoztatni" msgid "validation failed" -msgstr "validáció sikertelen" +msgstr "érvényesítés sikertelen" + +msgid "Value is the same as the last saved preset, but is not the system value" +msgstr "" +"Az érték megegyezik az utoljára mentett előre beállított értékkel, de nem " +"rendszerváltozó" msgid "Value is the same as the system value" msgstr "Az érték megegyezik a rendszerváltozóval" +msgid "Value isn't taken into account, it's computed over an other field." +msgstr "" +"Az értéket a rendszer nem veszi figyelembe, egy másik mező alapján számítja " +"ki." + msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" @@ -8969,10 +13158,11 @@ msgstr "" "mentett előbeállítással" msgid "Values in this column are for Normal mode" -msgstr "Ez az oszlop a Normál módra vonatkozik" +msgstr "Az ebben az oszlopban szereplő értékek a normál üzemmódra vonatkoznak" msgid "Values in this column are for Stealth mode" -msgstr "Ez az oszlop a Lopakodó módra vonatkozik" +msgstr "" +"Az ebben az oszlopban szereplő értékek a Lopakodó üzemmódra vonatkoznak" msgid "Variable layer height" msgstr "Változó rétegmagasság" @@ -8984,19 +13174,19 @@ msgid "Variable layer height - Manual edit" msgstr "Változó rétegmagasság - Kézi szerkesztés" msgid "Variable layer height - Reset" -msgstr "Változó rétegmagasság - Reset" +msgstr "Változó rétegmagasság - Visszaállítás" msgid "Variable layer height - Smooth all" -msgstr "Változó rétegmagasság - Sima összes" +msgstr "Változó rétegmagasság - Simítás" msgid "variants" msgstr "változatok" msgid "vendor" -msgstr "gyártó" +msgstr "szállító" msgid "Vendor:" -msgstr "Gyártó:" +msgstr "Forgalmazó:" msgid "Verbose G-code" msgstr "Bővebb G-kód" @@ -9011,111 +13201,172 @@ msgid "Vertical shells" msgstr "Függőleges héjak" msgid "Vertical Slider" -msgstr "Függőleges Csúszka" +msgstr "Függőleges csúszka" msgid "Vertical slider - Move active thumb Down" -msgstr "Függőleges csúszka - Aktív jelölő mozgatása Le" +msgstr "Függőleges csúszka - Az aktív hüvelykujj lefelé mozgatása" msgid "Vertical slider - Move active thumb Up" -msgstr "Függőleges csúszka - Aktív jelölő mozgatása Fel" +msgstr "Függőleges csúszka - Az aktív hüvelykujj felfelé mozgatása" msgid "View" msgstr "Nézet" msgid "View mode" -msgstr "Megjelenítési mód" +msgstr "Nézet mód" msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to be asked about unsaved changes again." msgstr "" -"Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" " -"lehetőséget.\n" -"hogy újra rákérdezzen a nem mentett módosításokra." +"Látogasson el a \"Beállítások\" oldalra, és jelölje be a \"%1%\" " +"lehetőséget\n" +"hogy ismét rákérdezzen a nem mentett módosításokra." msgid "" "Visit \"Preferences\" and check \"%1%\"\n" "to changes your choice." msgstr "" -"Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" \n" -"lehetőséget a választása módosításához." +"Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" " +"lehetőséget.\n" +"a választás megváltoztatásához." msgid "Visualize an already sliced and saved G-code" -msgstr "Egy már felszeletelt és elmentett G-kód megjelenítése" +msgstr "Egy felszeletelt és elmentett G-kód vizualizálása" msgid "Visualizing supports" -msgstr "Támasztékok vizualizálása" +msgstr "Támogatások vizualizálása" + +msgid "Vol. flow" +msgstr "Térfogatáramlás" msgid "Volume" msgstr "Térfogat" msgid "Volume to purge (mm³) when the filament is being" -msgstr "Tisztítandó térfogat (mm³), amikor a filament" +msgstr "Tisztítandó térfogat (mm³), amikor az izzószálat" msgid "Volumes in Object reordered" -msgstr "Az objektumban lévő térfogatok átrendezve" +msgstr "Az objektum kötetek átrendezve" msgid "Volumetric" -msgstr "A volumetrikus" +msgstr "Térfogat" msgid "Volumetric flow hints not available" -msgstr "Térfogatáramlási tippek nem állnak rendelkezésre" +msgstr "Nem állnak rendelkezésre térfogatáramlási adatok" msgid "Volumetric flow rate" msgstr "Térfogatáram" msgid "Volumetric flow rate (mm³/s)" -msgstr "Térfogatáram (mm³/s)" +msgstr "Térfogatáram (mm³/mp)" msgid "Volumetric speed" msgstr "Térfogati sebesség" +msgid "Voron Cube" +msgstr "Voron kocka" + +msgid "" +"Voron cubic cube with many features inside, with a bearing slot on top. " +"Better to check dimensional accuracy." +msgstr "" +"Voron kocka, belül sok funkcióval, a tetején csapágyazott résszel. Jobb a " +"méretpontosság ellenőrzése." + msgid "Wall thickness" msgstr "Falvastagság" msgid "Warning" -msgstr "Figyelmeztetés" +msgstr "Figyelem" msgid "WARNING:" -msgstr "FIGYELMEZTETÉS:" +msgstr "FIGYELEM:" msgid "Welcome" -msgstr "Üdvözlés" +msgstr "Üdvözöljük" msgid "Welcome to the %s Configuration Assistant" -msgstr "Üdvözli a %s Konfigurációs Asszisztens" +msgstr "Üdvözöljük a %s konfigurációs segédletben" msgid "Welcome to the %s Configuration Wizard" -msgstr "Üdvözöli a %s Konfigurációs Varázsló" +msgstr "Üdvözöljük a %s konfigurációs varázslóban" msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "Mit szeretne tenni a \"%1%\" előbeállítással a mentés után?" +msgid "" +"When an extruder travels to an object (from the start position or from an " +"object to another), the nozzle height is guaranteed to be at least at this " +"value.\n" +"It's made to ensure the nozzle won't hit clips or things you have on your " +"bed. But be careful to not put a clip in the 'convex shape' of an object.\n" +"Set to 0 to disable." +msgstr "" +"Amikor az extruder egy objektumhoz halad (a kiindulási pozícióból vagy egy " +"objektumtól egy másikhoz), a fúvóka magassága garantáltan legalább ezen az " +"értéken van.\n" +"Ez azért készült, hogy a fúvóka ne ütközzön klipszeknek vagy az ágyon lévő " +"tárgyaknak. De vigyázzon, hogy ne tegyen klipszet egy objektum \"domború " +"alakjába\".\n" +"A letiltáshoz állítsa 0-ra." + +msgid "" +"When an object is sliced, it will switch your view from the curent view to " +"the preview (and then gcode-preview) automatically, depending on the option " +"choosen." +msgstr "" +"Amikor egy objektumot felszeletel, a kiválasztott opciótól függően " +"automatikusan átvált a nézet a jelenlegi nézetről az előnézetre (majd a " +"gcode-előnézetre)." + msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" -"Ha be van jelölve, a nyomtatási és filament előbeállítások akkor is " -"megjelennek az előbeállítás szerkesztőben, ha az aktív nyomtatóval nem " -"kompatibilisként vannak megjelölve" +"Ha be van jelölve, a nyomtatási és szálelőállítások akkor is megjelennek az " +"előbeállítás-szerkesztőben, ha az aktív nyomtatóval nem kompatibilisnek " +"vannak jelölve" msgid "" "When checked, whenever dragging and dropping a project file on the " "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" -"Ha be van jelölve, amikor egy projektfájlt az alkalmazásra húz és ejt, " -"megjelenik egy párbeszédpanel, amelyben ki kell választani a betöltendő " -"fájlra vonatkozó műveletet." +"Ha be van jelölve, amikor egy projektfájlt az alkalmazásra húz, megjelenik " +"egy párbeszédpanel, amelyben ki kell választani a betöltendő fájlra " +"vonatkozó műveletet." + +msgid "" +"when printing %s with a volumetric rate of %3.2f mm³/s at filament speed " +"%3.2f mm/s." +msgstr "" +"%s térfogatszázalékos %3,2f mm³/mp nyomtatásakor %3,2f mm/mp szálsebességgel." msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" -"Több anyagból készült objektumok nyomtatásakor ez a beállítás arra utasítja " -"a Slic3r-t, hogy az átfedő objektumrészeket egymás után vágja le (2. részbe " -"belevág az 1. rész, a 3. részbe belevág 1. és 2. rész, stb.)." +"Több anyagból készült objektumok nyomtatásakor ez a beállítás arra készteti " +"a Slic3r-t, hogy az átfedő objektumrészeket egymás után vágja le (a 2. részt " +"az 1. rész fogja levágni, a 3. részt az 1. és 2. rész fogja levágni stb.)." + +msgid "" +"When printing multiple objects or copies on after another, this will help " +"you to choose how it's ordered.\n" +"Object will sort them by the order of the right panel.\n" +"Lowest Y will sort them by their lowest Y point. Useful for printers with a " +"X-bar.\n" +"Lowest Z will sort them by their height, useful for delta printers." +msgstr "" +"Ha több objektumot vagy másolatot nyomtat egymás után, ez segít kiválasztani " +"a sorrendet.\n" +"Az objektum a jobb oldali panel sorrendje szerint rendezi őket.\n" +"A Legalacsonyabb Y a legalacsonyabb Y pontjuk szerint fogja őket rendezni. " +"Hasznos az X-sávval rendelkező nyomtatóknál.\n" +"A Legalacsonyabb Z a magasságuk szerint rendezi őket, hasznos a delta " +"nyomtatóknál." msgid "" "When printing multiple objects or copies, this feature will complete each " @@ -9124,54 +13375,138 @@ msgid "" "warn and prevent you from extruder collisions, but beware." msgstr "" "Több objektum vagy másolat nyomtatásakor ez a funkció minden egyes " -"objektumot befejez, mielőtt a következőre lépne (és azt az alsó rétegről " -"kezdi). Ez a funkció hasznos az elhibázott nyomtatások kockázatának " -"elkerülése érdekében. A Slic3r elvileg figyelmeztet és megakadályozza az " -"extruder ütközéseket, de azért figyeljen." +"objektumot befejez, mielőtt a következőre lépne (és annak alsó rétegéről " +"kezdené). Ez a funkció hasznos a tönkrement nyomatok kockázatának elkerülése " +"érdekében. A Slic3r-nek figyelmeztetnie kell és meg kell akadályoznia az " +"extruder ütközéseket, de vigyázzon." + +msgid "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 75%) over the lowest nozzle diameter used in by the object." +msgstr "" +"Ha nagyon alacsony rétegmagassággal nyomtat, akkor is érdemes lehet " +"vastagabb alsó réteget nyomtatni, hogy javítsa a tapadást és a nem tökéletes " +"építőlemezek toleranciáját. Ez kifejezhető abszolút értékként vagy " +"százalékban (például: 75%) az objektum által használt legkisebb " +"fúvókaátmérőhöz képest." + +msgid "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder).\n" +"Note: This value will be unretracted when this extruder will load the next " +"time." +msgstr "" +"Ha a visszahúzás a fejcsere előtt aktiválódik, a szál a megadott " +"mennyiséggel visszahúzódik (a hosszúságot a nyers szálon mérik, ami az " +"extruder előtt van).\n" +"Megjegyzés: Ez az érték lesz visszahúzva, amikor ez az extruder legközelebb " +"betölt." msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" -"A visszahúzáskor a filament az itt megadott mértékben visszahúzódik (a " -"hosszúság a nyers szálon mérendő, mielőtt az belépne az extruderbe)." +"Amikor a visszahúzás beindul, a szál a megadott mennyiséggel visszahúzódik " +"(a hosszúságot a nyers szálon mérik, ami az extruder előtt van)." + +msgid "" +"When set to a non-zero value this fan speed is used only for external " +"perimeters (visible ones). \n" +"Set to 1 to disable the fan.\n" +"Set to -1 to use the normal fan speed on external perimeters.External " +"perimeters can benefit from higher fan speed to improve surface finish, " +"while internal perimeters, infill, etc. benefit from lower fan speed to " +"improve layer adhesion." +msgstr "" +"Ha nem nulla értékre van állítva, ez a ventilátorsebesség csak a külső " +"kerületeknél (látható) használatos.\n" +"A ventilátor kikapcsolásához állítsa 1-re.\n" +"Állítsa -1-re a normál ventilátorsebesség használatához a külső kerületeken. " +"A külső kerületek számára előnyös lehet a magasabb ventilátorsebesség a " +"felületminőség javítása érdekében, míg a belső kerületek, a kitöltés stb. az " +"alacsonyabb ventilátorsebesség előnyeit élvezheti a réteg tapadása érdekében." msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading. " -msgstr "Ha nullára van állítva, akkor a filamentet a betöltés során a parkolóhelyzetből pontosan ugyanannyira kerül előtolásra, mint amennyire a kiürítéskor vissza lett húzva. Ha pozitív, akkor tovább töltődik, ha negatív, akkor a betöltési mozgás rövidebb, mint a kiürítési. " +msgstr "" +"Ha nullára van állítva, akkor a nyomtatószálat a betöltés során a " +"parkolóhelyzetből pontosan ugyanannyit mozdítják el, mint amennyit a kiadás " +"során visszatolnak. Ha pozitív, akkor tovább töltődik, ha negatív, akkor a " +"betöltési mozgás rövidebb, mint a kiadás. " + +msgid "" +"When the external perimeter loop extrusion ends, a wipe is done, going " +"slightly inside the print. The number in this settting increases the wipe by " +"moving the nozzle along the loop again before the final wipe." +msgstr "" +"Amikor a külső peremhurok extrudálása véget ér, egy törlés történik, kissé a " +"nyomtatás belsejébe haladva. A szám ebben a beállításban növeli a törlést " +"azáltal, hogy a fúvókát a hurok mentén újra mozgatja a végső törlés előtt." + +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament (but not on the first extruder after " +"start, as it should already be loaded)." +msgstr "" +"Amikor a visszahúzás kompenzálásra kerül a szerszámváltás után, az extruder " +"ezt a további szálmennyiséget tolja ki (de nem az indítás utáni első " +"extruderen, mivel annak már be kell lennie töltve)." msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" -"Amikor a visszahúzás kompenzálásra kerül utazási mozgás után, az extruder " -"ezt a további szálmennyiséget nyomja előre. Erre a beállításra ritkán van " -"szükség." +"Amikor a visszahúzás kompenzálásra kerül az elmozdulás után, az extruder ezt " +"a további szálmennyiséget tolja ki. Erre a beállításra ritkán van szükség." + +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the brim at the beginning of each object. if you prefer to have more place " +"for you objects, you can print all the brims at the beginning, so ther is " +"less problem with collision." +msgstr "" +"Ha a 'Teljes egyedi objektumok' opciót használja, az alapértelmezett " +"viselkedés az, hogy a peremet minden objektum elején rajzolja meg. Ha több " +"helyet szeretne az objektumoknak, akkor az összes peremet az elején " +"nyomtathatja ki, így kevesebb probléma lesz az ütközéssel." + +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the skirt around each object. if you prefer to have only one skirt for the " +"whole platter, use this option." +msgstr "" +"Ha a 'Teljes egyedi objektumok' opciót használja, az alapértelmezett " +"viselkedés az, hogy minden egyes objektum köré megrajzolja a szoknyát. ha " +"azt szeretné, hogy csak egy szoknya legyen az egész tálcán, használja ezt az " +"opciót." msgid "WHITE BULLET" -msgstr "SZÜRKE PÖTTY" +msgstr "FEHÉR GOLYÓ" msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "" -"A SZÜRKE PÖTTY ikon a rendszeren kívüli (vagy nem alapértelmezett) " -"előbeállítást jelzi." +"A FEHÉR GOLYÓ ikon nem rendszer (vagy nem alapértelmezett) előbeállítást " +"jelez." msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "" -"A SZÜRKE PÖTTY ikon azt jelzi, hogy a beállítások megegyeznek az aktuális " -"opciócsoport utoljára mentett előbeállításával." +"A FEHÉR GOLYÓ ikon azt jelzi, hogy a beállítások megegyeznek az aktuális " +"opciós csoport utolsó mentett előbeállításával." msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" -"A SZÜRKE PÖTTY azt jelzi, hogy az érték megegyezik az utoljára mentett " +"A FEHÉR GOLYÓ ikon azt jelzi, hogy az érték megegyezik az utolsó elmentett " "előbeállítással." msgid "Whole word" @@ -9187,58 +13522,89 @@ msgid "Width from the back sphere center to the front sphere center" msgstr "Szélesség a hátsó gömb középpontjától az első gömb középpontjáig" msgid "Width of a wipe tower" -msgstr "A törlőtorony szélessége" +msgstr "Egy törlőtorony szélessége" + +msgid "" +"Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) " +"only one nozzle diameter." +msgstr "" +"A perem szélessége a törlőtorony esetében. Megadható mm-ben vagy a " +"(feltételezett) egyetlen fúvóka átmérőjének %-ában." msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "" -"Az objektumot és a generált párnát összekötő csatlakozó pálcák szélessége." +"Az objektumot és a generált padot összekötő csatlakozó pálcikák szélessége." msgid "Width of the display" -msgstr "Kijelző szélessége" +msgstr "A kijelző szélessége" + +msgid "will be turned off by default." +msgstr "alapértelmezés szerint ki lesz kapcsolva." msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" -"A szeletelt 2D poligonokat megnöveli vagy összezsugorítja a korrekció " -"előjelének megfelelően." +"A szeletelt 2D poligonokat a korrekció előjelének megfelelően felfújja vagy " +"leereszti." + +msgid "Will only take into account the delay for the cooling of overhangs." +msgstr "Csak a túlnyúlások hűtésének késleltetését veszi figyelembe." + +msgid "will run at %1%%% by default" +msgstr "alapértelmezés szerint %1%%%-on fog futni" msgid "Wipe" -msgstr "Törlés" +msgstr "Törölés" msgid "Wipe into this object" -msgstr "Törlés ebbe az objektumba" +msgstr "Törölje le ezt az objektumot" msgid "Wipe into this object's infill" -msgstr "Törlés az objektum kitöltésébe" +msgstr "Töröljön bele az objektum kitöltésébe" + +msgid "Wipe only when crossing perimeters" +msgstr "Csak a határok átlépésekor törölje le" + +msgid "Wipe speed" +msgstr "Törlési sebesség" msgid "Wipe Tower" msgstr "Törlőtorony" msgid "Wipe tower" -msgstr "Törlőtorony" +msgstr "Törlő torony" msgid "wipe tower" msgstr "törlőtorony" msgid "Wipe tower - Purging volume adjustment" -msgstr "Törlőtorony - Öblítési mennyiség beállítása" +msgstr "Törlőtorony - Tisztítási mennyiség beállítása" msgid "Wipe tower brim width" -msgstr "Törlőtorony karima szélesség" +msgstr "Törlőtorony peremszélesség" msgid "Wipe tower parameters" msgstr "Törlőtorony paraméterek" msgid "Wipe tower rotation angle" -msgstr "Törlőtorony forgatási szöge" +msgstr "Törlőtorony forgási szöge" msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Törlőtorony forgatási szöge az x-tengelyhez képest." +msgstr "Törlőtorony forgási szöge az x-tengelyhez képest." + +msgid "Wipe tower Width" +msgstr "Törölje a torony szélességét" + +msgid "Wipe tower X" +msgstr "X törlő torony" + +msgid "Wipe tower Y" +msgstr "Y törlő torony" msgid "Wipe while retracting" -msgstr "Törlés visszahúzás közben" +msgstr "Visszahúzás közben törölje le" msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " @@ -9265,7 +13631,7 @@ msgstr "" "miatt ne vetemedjenek meg és ne váljanak le a nyomtatóágyról." msgid "With sheath around the support" -msgstr "Burkolat a támasz körül" +msgstr "A támaszték körüli burkolattal" msgid "World coordinates" msgstr "Világ koordináták" @@ -9280,14 +13646,14 @@ msgid "" msgstr "" "Szeretné telepíteni?\n" "\n" -"Felhívjuk a figyelmet arra, hogy először egy teljes konfigurációs " -"pillanatfelvétel készül. Ez a későbbiekben bármikor visszaállítható, ha " -"probléma merülne fel az új verzióval.\n" +"Vegye figyelembe, hogy először egy teljes konfigurációs pillanatkép jön " +"létre. Ez aztán bármikor visszaállítható, ha az új verzióval probléma " +"merülne fel.\n" "\n" "Frissített konfigurációs csomagok:" msgid "write calledback failed" -msgstr "írás calledback sikertelen" +msgstr "visszaírás sikertelen" msgid "Write information about the model to the console." msgstr "A modellre vonatkozó információk írása a konzolra." @@ -9298,15 +13664,33 @@ msgstr "Rossz jelszó" msgid "X coordinate of the left front corner of a wipe tower" msgstr "A törlőtorony bal első sarkának X-koordinátája" +msgid "XY compensation" +msgstr "XY kompenzáció" + +msgid "XY First layer compensation" +msgstr "XY Első réteg kompenzáció" + +msgid "XY First layer compensation height in layers" +msgstr "XY Első rétegkompenzáció magassága rétegekben" + +msgid "XY holes compensation" +msgstr "X-Y lyukak kompenzálása" + +msgid "XY holes threshold" +msgstr "XY lyukak küszöbértéke" + msgid "XY separation between an object and its support" -msgstr "XY elválasztás egy objektum és annak támasztója között" +msgstr "XY elválasztás egy tárgy és a tartószerkezet között" msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" -"XY elválasztás egy objektum és a támasztószerkezet között. Ha százalékban " -"van megadva (például 50%), akkor a külső kerület szélességére kell számítani." +"XY elválasztás egy tárgy és a tartószerkezet között. Ha százalékban van " +"megadva (például 50%), akkor a külső kerület szélességére kell számítani." + +msgid "xyz decimals" +msgstr "xyz tizedesjegyek" msgid "Y coordinate of the left front corner of a wipe tower" msgstr "A törlőtorony bal első sarkának Y koordinátája" @@ -9321,6 +13705,92 @@ msgstr "" msgid "You are opening %1% version %2%." msgstr "Ön a %1% %2% verzióját nyitja meg." +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. the variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"Advice: before using a variable, it's safer to use the function 'default_XXX" +"(variable_name, default_value)' (enclosed in bracket as it's a script) in " +"case it's not set. You can replace XXX by 'int' 'bool' 'double' 'string'." +msgstr "" +"Hozzáadhatja az egyéni kódú makrókhoz elérhető adatokat.\n" +"Minden sorban egy változót definiálhat.\n" +"A formátum 'variable_name=value'. A változó neve csak [a-zA-Z0-9] vagy '_' " +"karaktereket tartalmazhat.\n" +"Az int vagy float értékként elemezhető érték numerikus értékként lesz " +"elérhető.\n" +"A dupla idézőjelek közé zárt érték stringként (idézőjelek nélkül) lesz " +"elérhető.\n" +"A csak 'true' vagy 'false' értéket felvevők értékek boolean értékek " +"lesznek.)\n" +"Minden más értéket stringként elemzünk, ahogy van.\n" +"Tanács: mielőtt egy változót használna, biztonságosabb a " +"'default_XXX(variable_name, default_value)' függvényt használni (zárójelben, " +"mivel szkriptről van szó) arra az esetre, ha az nincs beállítva. Az XXX " +"helyettesíthető 'int' 'bool' 'double' 'string' értékkel." + +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. The variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"These variables will be available as an array in the custom gcode (one item " +"per extruder), don't forget to use them with the {current_extruder} index to " +"get the current value. If a filament has a typo on the variable that change " +"its type, then the parser will convert evrything to strings.\n" +"Advice: before using a variable, it's safer to use the function 'default_XXX" +"(variable_name, default_value)' (enclosed in bracket as it's a script) in " +"case it's not set. You can replace XXX by 'int' 'bool' 'double' 'string'." +msgstr "" +"Hozzáadhatja az egyéni kódú makrókhoz elérhető adatokat.\n" +"Minden sorban egy változót definiálhat.\n" +"A formátum 'változó_név=érték'. A változó neve csak [a-zA-Z0-9] karaktereket " +"vagy '_' betűket tartalmazhat.\n" +"Az int vagy float értékként elemezhető érték numerikus értékként lesz " +"elérhető.\n" +"A dupla idézőjelekbe zárt értékek (idézőjelek nélkül) karakterláncként " +"lesznek elérhetőek.\n" +"A csak 'true' vagy 'false' értéket felvevők értékek boolean értékek " +"lesznek.)\n" +"Minden más értéket stringként elemezünk, ahogy van.\n" +"Ezek a változók tömbként lesznek elérhetőek az egyéni gkódban " +"(extruderenként egy elem), ne felejtsd el használni őket a " +"{current_extruder} indexszel, hogy megkapd az aktuális értéket. Ha egy " +"szálon elírás van a változóban, ami megváltoztatja a típusát, akkor az " +"elemző mindent stringre fog konvertálni.\n" +"Tanács: Mielőtt használsz egy változót, biztonságosabb az " +"'default_XXX(variable_name, default_value)' függvényt használni (zárójelbe " +"zárva, mivel ez egy szkript) arra az esetre, ha nincs beállítva. Az XXX " +"helyettesíthető 'int' 'bool' 'double' 'string' értékkel." + +msgid "" +"You can choose the dimension of the cube. It's a simple scale, you can " +"modify it in the right panel yourself if you prefer. It's just quicker to " +"select it here." +msgstr "" +"Kiválaszthatja a kocka méretét. Ez egy egyszerű skála, ha szeretné, a jobb " +"oldali panelen maga is módosíthatja. Csak gyorsabb itt kiválasztani." + +msgid "" +"You can increase this to over-extrude on the top layer if there is not " +"enough plastic to make a good fill." +msgstr "" +"Ezt növelheti, hogy a felső réteget túlnyomja, ha nincs elég műanyag a jó " +"kitöltéshez." + msgid "You can keep presets modifications to the new project or discard them" msgstr "" "Az előbeállítások módosításait megtarthatja az új projekthez, vagy elvetheti " @@ -9340,63 +13810,70 @@ msgid "You can open only one .gcode file at a time." msgstr "Egyszerre csak egy .gcode fájlt nyithat meg." msgid "You can put your notes regarding the filament here." -msgstr "A filamenttel kapcsolatos jegyzeteit ide teheti." +msgstr "Ide teheti fel jegyzeteit a nyomtatószálról." msgid "You can put your notes regarding the printer here." -msgstr "A nyomtatóval kapcsolatos megjegyzéseit ide írhatja be." +msgstr "A nyomtatóval kapcsolatos megjegyzéseit itt teheti meg." msgid "You can put your notes regarding the SLA print material here." -msgstr "Az SLA anyaggal kapcsolatos jegyzeteit ide írhatja." +msgstr "SLA nyomtatott anyagával kapcsolatos jegyzeteit itt teheti fel." msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" -"Beállíthatja egy pozitív értékre, hogy az első megadott számú rétegnél " -"teljesen letiltsa a ventilátort, így az nem rontja a tapadást." +"Ezt pozitív értékre is beállíthatja, hogy az első rétegeknél egyáltalán ne " +"legyen ventilátor, így nem rontja a tapadást." + +msgid "" +"You can use all configuration options as variables inside this template. For " +"example: {layer_height}, {fill_density} etc. You can also use {timestamp}, " +"{year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " +"{input_filename}, {input_filename_base}." +msgstr "" +"Ebben a sablonban az összes konfigurációs opciót használhatja változóként. " +"Például: {layer_height}, {fill_density} stb. Használhatja továbbá a " +"{timestamp}, {year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " +"{input_filename}, {input_filename_base} értékeket." msgid "You can't change a type of the last solid part of the object." -msgstr "Az objektum utolsó tömör részének típusát nem lehet megváltoztatni." +msgstr "You can't change a type of the last solid part of the object." msgid "" -"You can't to add the object(s) from %s because of one or some of them " -"is(are) multi-part" +"You can't to add the object(s) from %s because of one or some of them is" +"(are) multi-part" msgstr "" -"Nem lehet hozzáadni az objektum(ok)at %s-ből, mert az egyik vagy néhány " -"közülük több részből áll(nak)" +"Nem lehet hozzáadni az objektum(ok)at a %s-ből, mert egy vagy néhány közülük " +"több részből áll(nak)" msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "" -"Nem tölthet be olyan SLA projektet, amelyben több részből álló objektum van " -"a tárgyasztalon" +msgstr "Nem tölthet be SLA projektet több részből álló objektummal az ágyon" msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" -"Nem használhat nem egységes méretezési módot több objektum/alkatrész " -"kijelölése esetén" +"Nem használhat nem egyenletes méretezési módot több objektum/alkatrész " +"kiválasztásához" msgid "" "You have just added a G-code for color change, but its value is empty.\n" "To export the G-code correctly, check the \"Color Change G-code\" in " "\"Printer Settings > Custom G-code\"" msgstr "" -"Nemrég hozzáadott egy G-kódot a színváltáshoz, de az értéke üres.\n" -"A G-kód helyes exportálásához jelölje be a \"G-kód színének módosítása\" " -"lehetőséget a \"Nyomtatóbeállítások > Egyéni G-kód\" részben." +"Most adott hozzá egy G-kódot a színváltáshoz, de az értéke üres.\n" +"A G-kód helyes exportálásához ellenőrizze a \"Színváltás G-kód\" opciót a " +"\"Nyomtatóbeállítások > Egyéni G-kód\" menüpontban." msgid "" "You have selected physical printer \"%1%\" \n" "with related printer preset \"%2%\"" msgstr "" "Ön a \"%1%\" fizikai nyomtatót választotta ki \n" -"a kapcsolódó \"%2%\" nyomtató-előbeállítással." +"a kapcsolódó \"%2%\" nyomtató előbeállítással." msgid "" "You have the following presets with saved options for \"Print Host upload\"" -msgstr "" -"A következő előbeállítások állnak rendelkezésre a \"Nyomtató feltöltés\" " -"mentett beállításaival" +msgstr "Következő előbeállítások rendelkeznek a „Print Host” mentett opciókkal" msgid "You may need to update your graphics card driver." msgstr "Lehet, hogy frissítenie kell a grafikus kártya illesztőprogramját." @@ -9405,7 +13882,7 @@ msgid "You must install a configuration update." msgstr "Telepítenie kell egy konfigurációs frissítést." msgid "You should change the name of your printer device." -msgstr "Meg kell változtatnia a nyomtatója nevét." +msgstr "Meg kell változtatnia a nyomtatóeszköz nevét." msgid "You started your selection with %s Item." msgstr "A kiválasztást a %s elemmel kezdte." @@ -9437,55 +13914,66 @@ msgstr "" "rendszer előbeállítás váltáskor" msgid "Your current changes will delete all saved color changes." -msgstr "" -"Az aktuális módosítások törlik az összes korábban elmentett színváltást." +msgstr "Az aktuális módosítások törlik az összes elmentett színmódosítást." msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" -"Az aktuális módosításai törlik az összes mentett Extruder (eszköz) " +"Az aktuális módosítások törlik az összes elmentett extruder (szerszám) " "módosítást." msgid "Your file was repaired." -msgstr "A fájlja javításra került." +msgstr "A fájl javítva lett." msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" "Az objektum túl nagynak tűnik, ezért automatikusan le lett méretezve, hogy " -"illeszkedjen a tárgyasztalhoz." +"illeszkedjen a nyomtatóágyhoz." msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." msgstr "" -"A nyomtatás nagyon közel van az alapozó régiókhoz. Győződjön meg róla, hogy " +"A lenyomata nagyon közel van az alapozó régiókhoz. Győződjön meg róla, hogy " "nincs ütközés." +msgid "Z full step" +msgstr "Z teljes lépés" + msgid "Z offset" -msgstr "Z ofszet" +msgstr "Z eltolás" + +msgid "Z Travel" +msgstr "Z utazás" + +msgid "Z travel speed" +msgstr "Z utazási sebesség" + +msgid "Z-lift override" +msgstr "Z-emelés felülbírálása" msgid "Zig-Zag" -msgstr "Cikk-Cakk" +msgstr "Cikcakk" msgid "Zoom" -msgstr "Zoom" +msgstr "Nagyítás" msgid "Zoom in" -msgstr "Zoom közelítés" +msgstr "Nagyítás" msgid "Zoom out" -msgstr "Zoom távolítás" +msgstr "Kicsinyítés" msgid "Zoom to Bed" -msgstr "Zoom a tárgyasztalra" +msgstr "Nagyítás az ágyra" msgid "" "Zoom to selected object\n" "or all objects in scene, if none selected" msgstr "" -"Nagyítás a kiválasztott objektumra\n" -"vagy az összes objektumra a jelenetben, ha egy sincs kiválasztva" +"Nagyítás kiválasztott objektumra\n" +"vagy minden objektumra a jelenetben, ha egyik sincs kijelölve" msgid "°C" msgstr "°C" diff --git a/resources/localization/hu/TODO.po b/resources/localization/hu/TODO.po index 1a3cd5fde..25d06d715 100644 --- a/resources/localization/hu/TODO.po +++ b/resources/localization/hu/TODO.po @@ -1,26 +1,11 @@ -#: src/slic3r/GUI/PresetHints.cpp:78 src/slic3r/GUI/PresetHints.cpp:118 -#: src/slic3r/GUI/PresetHints.cpp:135 -#, possible-boost-format -msgid " and will gradually speed-up to the above speeds over %1% layers" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1125 -msgid "" -" Tab layout: all windows are in the application, all are selectable via a " -"tab." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1123 -msgid "!! Can be unstable in some os distribution !!" +#: src/libslic3r/PrintConfig.cpp:5243 +msgid "$ per hour" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5227 -msgid "$ per hour" +#: ../../ui_layout/default/print.ui : l281 +msgid "% of perimeter flow" msgstr "" @@ -30,7 +15,7 @@ msgid "%1% is closing" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1390 +#: src/slic3r/GUI/GUI_App.cpp:1392 #, possible-boost-format msgid "%1% started after a crash" msgstr "" @@ -39,35 +24,49 @@ msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:910 #, possible-boost-format #Similar to me: %1% will remember your action. +# 2 changes: %s will remember your action. +# translation: %s emlékezni fog a műveletére. +# 7 changes: %s will remember your choice. +# translation: %s emlékezni fog a választására. # 11 changes: PrusaSlicer will remember your action. # translation: A PrusaSlicer emlékezni fog a műveletére. msgid "%1% will remember your action." msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:3341 src/slic3r/GUI/Plater.cpp:1720 +#: src/slic3r/GUI/GUI_App.cpp:3343 src/slic3r/GUI/Plater.cpp:1756 #, possible-boost-format #Similar to me: %1% will remember your choice. +# 2 changes: %s will remember your choice. +# translation: %s emlékezni fog a választására. +# 7 changes: %s will remember your action. +# translation: %s emlékezni fog a műveletére. # 11 changes: PrusaSlicer will remember your choice. # translation: A PrusaSlicer emlékezni fog a választására. msgid "%1% will remember your choice." msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:3345 src/slic3r/GUI/Plater.cpp:1726 +#: src/slic3r/GUI/GUI_App.cpp:3347 src/slic3r/GUI/Plater.cpp:1762 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:913 #, possible-boost-format +#Similar to me: %1%: Don't ask me again +# 2 changes: %s: Don't ask me again +# translation: %s: Ne kérdezd újra msgid "%1%: Don't ask me again" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:3334 +#: src/slic3r/GUI/GUI_App.cpp:3336 #, possible-boost-format +#Similar to me: %1%: Open hyperlink +# 3 changes: : Open hyperlink +# translation: : Hiperhivatkozás megnyitása msgid "%1%: Open hyperlink" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1391 +#: src/slic3r/GUI/GUI_App.cpp:1393 #, possible-boost-format #Similar to me: %5% crashed last time when attempting to set window position.\nWe are sorry for the inconvenience, it unfortunately happens with certain multiple-monitor setups.\nMore precise reason for the crash: \"%1%\".\nFor more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n\nTo avoid this problem, consider disabling \"%4%\" in \"Preferences\". Otherwise, the application will most likely crash again next time. # 11 changes: PrusaSlicer crashed last time when attempting to set window position.\nWe are sorry for the inconvenience, it unfortunately happens with certain multiple-monitor setups.\nMore precise reason for the crash: \"%1%\".\nFor more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n\nTo avoid this problem, consider disabling \"%4%\" in \"Preferences\". Otherwise, the application will most likely crash again next time. @@ -84,66 +83,10 @@ msgid "" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:459 src/slic3r/GUI/PresetHints.cpp:464 -#, possible-c-format, possible-boost-format -#Similar to me: %d perimeter: %.2f mm -# 7 changes: %d lines: %.2f mm -# translation: %d vonalhoz: %.2f mm -msgid "%d perimeter: %.2f mm" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:388 -#, possible-c-format, possible-boost-format -#Similar to me: %s flow rate is maximized -# 4 changes: flow rate is maximized -# translation: áramlási sebesség(e) maximalizálva van -msgid "%s flow rate is maximized " -msgstr "" - - -#: src/slic3r/GUI/GUI_Init.cpp:83 src/slic3r/GUI/GUI_Init.cpp:86 -#, possible-c-format, possible-boost-format -#Similar to me: %s GUI initialization failed -# 10 changes: PrusaSlicer GUI initialization failed -# translation: A PrusaSlicer GUI inicializálása nem sikerült -msgid "%s GUI initialization failed" -msgstr "" - - -#: src/slic3r/GUI/GUI_App.cpp:720 -#, possible-c-format, possible-boost-format -#Similar to me: %s has encountered a localization error. Please report to %s team, what language was active and in which scenario this issue happened. Thank you.\n\nThe application will now terminate. -# 20 changes: PrusaSlicer has encountered a localization error. Please report to PrusaSlicer team, what language was active and in which scenario this issue happened. Thank you.\n\nThe application will now terminate. -# translation: A PrusaSlicer lokalizációs hibát észlelt. Kérjük, jelentse a PrusaSlicer csapatának, hogy melyik nyelv volt aktív, és melyik helyen szerint történt ez a probléma. Köszönöm.\n\nAz alkalmazás most leáll. -msgid "" -"%s has encountered a localization error. Please report to %s team, what " -"language was active and in which scenario this issue happened. Thank you.\n" -"\n" -"The application will now terminate." -msgstr "" - - -#: src/slic3r/GUI/UpdateDialogs.cpp:95 -#, possible-c-format, possible-boost-format -#Similar to me: %s is not using the newest configuration available.\nConfiguration Wizard may not offer the latest printers, filaments and SLA materials to be installed. -# 11 changes: PrusaSlicer is not using the newest configuration available.\nConfiguration Wizard may not offer the latest printers, filaments and SLA materials to be installed. -# translation: A PrusaSlicer nem a legújabb elérhető konfigurációt használja.\nA Konfigurációs Varázsló nem biztos, hogy a legújabb nyomtatókat, filamenteket és SLA anyagokat kínálja fel a telepítéshez. -msgid "" -"%s is not using the newest configuration available.\n" -"Configuration Wizard may not offer the latest printers, filaments and SLA " -"materials to be installed. " -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1559 -#, possible-c-format, possible-boost-format -msgid "%s Releases" -msgstr "" - - #: src/slic3r/GUI/OpenGLManager.cpp:258 #Similar to me: %s requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %1%, render %2%, vendor %3% was detected. +# 6 changes: %s requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected. +# translation: A %s helyes futtatásához OpenGL 2.0-képes grafikus vezérlőre van szükség, \nmíg az OpenGL verzió %s, render %s, vendor %s érzékelésre került. # 16 changes: PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected. # translation: A PrusaSlicer helyes futtatásához OpenGL 2.0 képes grafikus vezérlőre van szükség, \nmiközben az alábbiakat észleltük: OpenGL verzió %s, render %s, vendor %s. msgid "" @@ -152,195 +95,46 @@ msgid "" msgstr "" -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 -#, possible-c-format, possible-boost-format -#Similar to me: %s version -# 3 changes: version -# translation: verzió -# 4 changes: %s error -# translation: %s hiba -# 4 changes: New version: -# translation: Új verzió: -msgid "%s version" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1563 -#, possible-c-format, possible-boost-format -#Similar to me: %s website -# 2 changes: %s &Website -# translation: %s Weboldal -msgid "%s website" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1561 -#, possible-c-format, possible-boost-format -msgid "%s wiki" -msgstr "" - - -#: src/slic3r/GUI/ConfigWizard.cpp:1299 -#, possible-c-format, possible-boost-format -#Similar to me: %s's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\nThe Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively. -# 10 changes: PrusaSlicer's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\nThe Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively. -# translation: A PrusaSlicer felhasználói felülete három változatban érhető el:\nEgyszerű, Haladó, és Szakértő.\nAz Egyszerű mód csak a 3D nyomtatáshoz szükséges leggyakrabban használt beállításokat jeleníti meg. A másik kettő fokozatosan kifinomultabb finomhangolást kínál, haladó, illetve szakértő felhasználók számára. -msgid "" -"%s's user interfaces comes in three variants:\n" -"Simple, Advanced, and Expert.\n" -"The Simple mode shows only the most frequently used settings relevant for " -"regular 3D printing. The other two offer progressively more sophisticated " -"fine-tuning, they are suitable for advanced and expert users, respectively." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1997 -#Similar to me: &Generate -# 3 changes: General -# translation: Általános -msgid "&Generate" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3701 -msgid "'As bridge' flow threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3689 -msgid "'As bridge' speed threshold" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4742 src/slic3r/GUI/Tab.cpp:4750 -#: src/slic3r/GUI/Tab.cpp:4754 -msgid "" -"(even if the acceleration is set to 3000 in the print profile, if this is at " -"1500, it won't export a gcode that will tell to go over 1500)." -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:145 -#, possible-boost-format -msgid "" -"(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:148 -#, possible-boost-format -msgid "(however, speed will never be reduced below %1%mm/s)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2783 -msgid "0 (Simple connect)" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "2x10°" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1873 +#: src/slic3r/GUI/MainFrame.cpp:1868 #Similar to me: 3D &Platter Tab +# 1 changes: 3D &Plater Tab +# translation: 3D &Tálca lap # 4 changes: &Plater Tab # translation: Tárgyasztal Fül msgid "3D &Platter Tab" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:360 src/slic3r/GUI/MainFrame.cpp:462 -#: src/slic3r/GUI/MainFrame.cpp:671 src/slic3r/GUI/MainFrame.cpp:714 -msgid "3D view" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "3x10°" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "3x5°" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "4x10°" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "5x5°" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3489 -msgid "" -"[Deprecated] Prefer using max_gcode_per_second instead, as it's much better " -"when you have very different speeds for features.\n" -"Too many too small commands may overload the firmware / connection. Put a " -"higher value here if you see strange slowdown.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/Print.cpp:884 +#: src/libslic3r/Print.cpp:885 msgid "" "\"G92 E0\" was found in before_layer_gcode, which is incompatible with " "absolute extruder addressing." msgstr "" -#: src/libslic3r/Print.cpp:886 +#: src/libslic3r/Print.cpp:887 msgid "" "\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " "extruder addressing." msgstr "" - -#: src/slic3r/GUI/PresetHints.cpp:124 -#, possible-boost-format -msgid "" -"\n" -"\n" -"If estimated layer time is below ~%1%s" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:88 -#, possible-boost-format -#Similar to me: \n\nIf estimated layer time is below ~%1%s, but still greater than ~%2%s, fan will run at a proportionally increasing speed between %3%%% and %4%%% -# 32 changes: If estimated layer time is greater, but still below ~%1%s, fan will run at a proportionally decreasing speed between %2%%% and %3%%%. -# translation: Ha a becsült rétegidő több, de még mindig ~%1%s alatt van, akkor a ventilátor arányosan csökkenő sebességgel fog működni %2%%% és %3%%% között. -msgid "" -"\n" -"\n" -"If estimated layer time is below ~%1%s, but still greater than ~%2%s, fan " -"will run at a proportionally increasing speed between %3%%% and %4%%%" -msgstr "" - #: ../../ui_layout/default/print.ui msgid "_" msgstr "" -#: src/libslic3r/PrintConfig.cpp:760 -#Similar to me: Above bridge flow ratio -# 7 changes: Bridge flow ratio -# translation: Híd áramlási arány -msgid "Above bridge flow ratio" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:759 -msgid "Above the bridges" +#: src/libslic3r/PrintConfig.cpp:2583 +msgid "" +"A percentage of the perimeter flow (mm3/s) is used as a limit for the gap " +"fill flow, and so the gapfill may reduce its speed when the gap fill " +"extrusions became too thick. This allow you to use a high gapfill speed, to " +"print the thin gapfill quickly and reduce the difference in flow rate for " +"the gapfill.\n" +"Set zero to deactivate." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5384 +#: src/libslic3r/PrintConfig.cpp:5400 #, possible-c-format, possible-boost-format msgid "" "Acceleration for travel moves (jumps between distant extrusion points).\n" @@ -349,16 +143,11 @@ msgid "" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:1089 -#Similar to me: Access via settings button in the top menu -# 13 changes: New layout, access via settings button in the top menu -# translation: Új elrendezés, a fülsáv elérése felső menüben található beállítások gombbal lehetséges -msgid "Access via settings button in the top menu" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1433 +#: src/libslic3r/PrintConfig.cpp:1434 #, possible-c-format, possible-boost-format +#Similar to me: Activate this option to modify the flow to acknowledge that the nozzle is round and the corners will have a round shape, and so change the flow to realize that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\nNote: At 100% this changes the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer. +# 106 changes: Activate this option to modify the flow to acknowledge that the nozzle is round and the corners will have a round shape, and so change the flow to realize that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\nNote: At 100% this changes the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it. +# translation: Aktiválja ezt az opciót az áramlás módosításához, hogy tudomásul vegye, hogy a fúvóka kerek, és a sarkok kerek alakúak lesznek, és így az áramlást úgy módosítsa, hogy ezt megvalósítsa, és elkerülje a túlzott extrudálást. A 100% aktiválva van, a 0% kikapcsolva, az 50% pedig félig aktiválva.\nMegjegyzés: 100%-nál ez ~5%-kal változtatja meg az áramlást egy nagyon kis távolságon (~fúvókaátmérő), így ez nem lehet észrevehető, hacsak nincs nagyon nagy fúvókája és nagyon precíz nyomtatója.\nEz nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Lehet, hogy eltávolítjuk, ha nincs rá szükség. msgid "" "Activate this option to modify the flow to acknowledge that the nozzle is " "round and the corners will have a round shape, and so change the flow to " @@ -369,71 +158,12 @@ msgid "" "nozzle and a very precise printer." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3180 -#, possible-c-format, possible-boost-format -msgid "" -"Add a M106 S255 (max speed for fan) for this amount of seconds before going " -"down to the desired speed to kick-start the cooling fan.\n" -"This value is used for a 0->100% speedup, it will go down if the delta is " -"lower.\n" -"Set to 0 to deactivate." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1546 -msgid "" -"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " -"keeps adding perimeters until all overhangs are filled.\n" -"!! this is a very slow algorithm !!\n" -"If you use this setting, strongly consider also using overhangs_reverse." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1534 -#, possible-c-format, possible-boost-format -msgid "" -"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " -"keeps adding perimeters, until more than 70% of the loop immediately above " -"is supported.\n" -"If you succeed in triggering the algorithm behind this setting, please send " -"me a message. Personally, I think it's useless." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1557 -msgid "" -"Add one perimeter every odd layer. With this, infill is taken into the " -"sandwich and you may be able to reduce drastically the infill/perimeter " -"overlap setting. " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1264 -#Similar to me: Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers).\n!! solid_over_perimeters may erase these surfaces !! -# 54 changes: Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers). -# translation: Adjon hozzá tömör kitöltést a ferde felületek közelében, hogy biztosítsa a függőleges héjvastagságot (felső+alsó szilárd rétegek). -msgid "" -"Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers).\n" -"!! solid_over_perimeters may erase these surfaces !!" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2183 -msgid "" -"Add this angle each layer to the base angle for infill. May be useful for " -"art, or to be sure to hit every object's feature even with very low infill. " -"Still experimental, tell me what makes it useful, or the problems that arise " -"using it." -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: advanced # 1 changes: Advanced # translation: Haladó # 3 changes: Balanced -# translation: Kiegyensúlyozott +# translation: Kiegyenlített msgid "advanced" msgstr "" @@ -442,64 +172,19 @@ msgid "Advanced Infill options" msgstr "" -#: src/slic3r/GUI/Tab.cpp:3153 -msgid "Advanced wipe tower purge volume calculs" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2579 -#Similar to me: after last perimeter -# 6 changes: External perimeter -# translation: Külső kerület -# 7 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor -# 7 changes: External perimeters -# translation: Külső kerületek -msgid "after last perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2874 src/libslic3r/PrintConfig.cpp:5578 -msgid "Algorithm" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5580 -msgid "" -"Algorithm for the advanced wipe.\n" -"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" -"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " -"volume_mult * (pigmentBefore-pigmentAfter)^3\n" -"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / " -"(0.5+pigmentAfter)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2636 -msgid "" -"All characters that are written here will be replaced by '_' when writing " -"the gcode file name.\n" -"If the first charater is '[' or '(', then this field will be considered as a " -"regexp (enter '[^a-zA-Z0-9]' to only use ascii char)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2582 -msgid "" -"All gaps, between the last perimeter and the infill, which are thinner than " -"a perimeter will be filled by gapfill." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4204 +#: src/libslic3r/PrintConfig.cpp:4220 #Similar to me: All surfaces +# 3 changes: On surfaces +# translation: Felületeken +# 4 changes: Min surface +# translation: Min. felület # 4 changes: All top surfaces # translation: Minden felső felület msgid "All surfaces" msgstr "" -#: src/slic3r/GUI/ImGuiWrapper.cpp:1008 src/slic3r/GUI/Search.cpp:555 +#: src/slic3r/GUI/ImGuiWrapper.cpp:1009 src/slic3r/GUI/Search.cpp:628 #Similar to me: All tags # 3 changes: All walls # translation: Összes fal @@ -507,7 +192,7 @@ msgid "All tags" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5133 +#: src/libslic3r/PrintConfig.cpp:5149 msgid "" "Allow all perimeters to overlap, instead of just external ones.\n" "100% means that perimeters can overlap completly on top of each other.\n" @@ -515,31 +200,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:558 src/libslic3r/PrintConfig.cpp:559 -msgid "Allow empty layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3171 -msgid "Allow fan delay on overhangs" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:322 src/slic3r/GUI/Preferences.cpp:326 -#, possible-boost-format -#Similar to me: Allow just a single %1% instance -# 11 changes: Allow just a single PrusaSlicer instance -# translation: Csak egyetlen PrusaSlicer példány engedélyezése -msgid "Allow just a single %1% instance" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1025 -msgid "Allow only one skirt loop" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5122 +#: src/libslic3r/PrintConfig.cpp:5138 +#Similar to me: Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that flow isn't adjusted and so this will result in over-extruding and undefined behavior.\n100% means that perimeters can overlap completly on top of each other.\n0% will deactivate this setting +# 105 changes: Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that flow isn't adjusted and so this will result in over-extruding and undefined behavior. +# translation: Engedje meg, hogy a legkülső kerület átfedje önmagát, hogy elkerülje a vékony falak használatát. Vegye figyelembe, hogy az áramlás nincs beállítva, így ez túlnyúlást és meghatározatlan viselkedést fog eredményezni. msgid "" "Allow outermost perimeter to overlap itself to avoid the use of thin walls. " "Note that flow isn't adjusted and so this will result in over-extruding and " @@ -548,38 +212,10 @@ msgid "" "0% will deactivate this setting" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5548 -#, possible-c-format, possible-boost-format -msgid "" -"Allow Slic3r to compute the purge volume via smart computations. Use the " -"pigment% of each filament and following parameters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5178 -msgid "" -"Allow the external perimeter to merge the thin walls in the path. You can " -"deactivate this if you are using thin walls as a custom support, to reduce " -"adhesion a little." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:825 -msgid "" -"Allow to create a brim over an island when it's inside a hole (or surrounded " -"by an object)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3215 -msgid "Also emit limits to G-code" -msgstr "" - #: ../../ui_layout/default/print.ui : l46 #Similar to me: Also for all perimeters # 9 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor +# translation: külső kerületeket # 9 changes: External perimeters # translation: Külső kerületek # 9 changes: Small perimeters @@ -588,7 +224,7 @@ msgid "Also for all perimeters" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:346 +#: src/slic3r/GUI/Preferences.cpp:353 #Similar to me: Always ask for unsaved changes in presets, when: \n- Closing Slic3r while some presets are modified,\n- Loading a new project while some presets are modified # 6 changes: Always ask for unsaved changes in presets, when: \n- Closing PrusaSlicer while some presets are modified,\n- Loading a new project while some presets are modified # translation: Mindig kérdezzen rá az előbeállítások el nem mentett módosításaira: \n- A PrusaSlicer bezárásakor, miközben egyes előbeállítások módosultak,\n- Új projekt betöltésekor, miközben egyes előbeállítások módosultak @@ -601,7 +237,7 @@ msgid "" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:337 +#: src/slic3r/GUI/Preferences.cpp:344 #Similar to me: Always ask for unsaved changes in project, when: \n- Closing Slic3r,\n- Loading or creating a new project # 6 changes: Always ask for unsaved changes in project, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project # translation: Mindig kérdezzen rá a projekt nem mentett változtatásaira: \n- A PrusaSlicer bezárásakor,\n- Új projekt betöltésekor, vagy létrehozásakor @@ -615,39 +251,14 @@ msgid "" "- Loading or creating a new project" msgstr "" - -#: src/slic3r/GUI/Preferences.cpp:360 -msgid "Always keep current preset changes on a new project" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5939 -msgid "Amount of lift for travel." -msgstr "" - #: ../../ui_layout/default/print.ui msgid "Anchor solid infill by X mm" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:2890 -msgid "Anchored" -msgstr "" - #: ../../ui_layout/default/print.ui msgid "Angle" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:4273 -msgid "Angle cost" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:572 -msgid "Appearance" -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: Apply on # 3 changes: Apply @@ -656,29 +267,21 @@ msgid "Apply on" msgstr "" -#: src/slic3r/GUI/Tab.cpp:4635 +#: src/slic3r/GUI/Tab.cpp:4637 #Similar to me: Are you sure you want to delete all substitutions? # 16 changes: Are you sure you want to delete \"%1%\" printer? -# translation: Biztos benne, hogy törli a \"%1%\" nyomtatót? +# translation: Biztos, hogy törölni szeretné a \"%1%\" nyomtatót? # 20 changes: Are you sure you want to do it? -# translation: Biztos benne, hogy meg akarja csinálni? +# translation: Biztos, hogy ezt akarja csinálni? msgid "Are you sure you want to delete all substitutions?" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:968 -msgid "Are you sure?" -msgstr "" - - -#: src/slic3r/GUI/GUI_App.cpp:1194 -msgid "Artwork model by" -msgstr "" - - #: src/slic3r/GUI/OpenGLManager.cpp:265 #, possible-boost-format #Similar to me: As a workaround, you may run %1% with a software rendered 3D graphics by running %2%.exe with the --sw-renderer parameter. +# 4 changes: As a workaround, you may run %s with a software rendered 3D graphics by running %s.exe with the --sw-renderer parameter. +# translation: Megoldásként futtathatja a %s programot szoftveresen renderelt 3D grafikával, ha a %s.exe programot a --sw-renderer paraméterrel futtatja. # 23 changes: As a workaround, you may run PrusaSlicer with a software rendered 3D graphics by running prusa-slicer.exe with the --sw-renderer parameter. # translation: Alternatív megoldásként a PrusaSlicer szoftveresen renderelt 3D grafikával is használható, ha a prusa-slicer.exe programot a --sw-renderer paraméterrel indítja el. msgid "" @@ -687,60 +290,19 @@ msgid "" msgstr "" -#: src/slic3r/GUI/ConfigWizard.cpp:1286 src/slic3r/GUI/Preferences.cpp:280 -#, possible-boost-format -msgid "Associate .3mf files to %1%" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:383 -#, possible-boost-format -msgid "Associate .gcode files to %1%" -msgstr "" - - -#: src/slic3r/GUI/ConfigWizard.cpp:1287 src/slic3r/GUI/Preferences.cpp:287 -#, possible-boost-format -msgid "Associate .stl files to %1%" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:62 -#, possible-boost-format -msgid "at %1%%% over all bridges" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:64 src/slic3r/GUI/PresetHints.cpp:104 -#, possible-boost-format -msgid "at %1%%% over bridges" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:52 src/slic3r/GUI/PresetHints.cpp:93 -#, possible-boost-format -msgid "at %1%%% over external perimeters" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:68 src/slic3r/GUI/PresetHints.cpp:70 -#: src/slic3r/GUI/PresetHints.cpp:109 -#, possible-boost-format -msgid "at %1%%% over infill bridges" +#: src/slic3r/GUI/Preferences.cpp:374 +msgid "Ask for 'new project' on 'Delete all'" msgstr "" #: src/slic3r/GUI/PresetHints.cpp:58 src/slic3r/GUI/PresetHints.cpp:101 #, possible-boost-format +#Similar to me: at %1%%% over support interface surfaces +# 14 changes: at %1%%% over top fill surfaces +# translation: %1%%%-ban a felső töltőfelületek felett msgid "at %1%%% over support interface surfaces" msgstr "" - -#: src/slic3r/GUI/PresetHints.cpp:55 src/slic3r/GUI/PresetHints.cpp:98 -#, possible-boost-format -msgid "at %1%%% over top fill surfaces" -msgstr "" - #: ../../ui_layout/default/extruder.ui : l39 msgid "At end" msgstr "" @@ -763,55 +325,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5579 -msgid "Auto-wipe algorithm" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5570 -#Similar to me: Auto-wipe multiplier -# 7 changes: Extrusion multiplier -# translation: Extrudáló szorzó -msgid "Auto-wipe multiplier" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2886 -msgid "Automatic" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2888 -msgid "Automatic, only for small areas" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2889 -msgid "Automatic, or anchored if too big" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2887 -msgid "Automatic, unless full" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:181 -#Similar to me: Automation -# 4 changes: Duration -# translation: Időtartam -# 4 changes: Information -# translation: Információ -# 4 changes: Rotation -# translation: Forgatás -msgid "Automation" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4918 +#: src/slic3r/GUI/Tab.cpp:4920 #Similar to me: BACK ARROW icon indicates that the values this widget control were changed and at least one is not equal to the last saved preset.\nClick to reset current all values to the last saved preset. # 42 changes: BACK ARROW icon indicates that the value was changed and is not equal to the last saved preset.\nClick to reset current value to the last saved preset. -# translation: VISSZA NYÍL ikon azt jelzi, hogy az érték megváltozott, és nem egyenlő az utoljára mentett előbeállítással.\nKattintson az aktuális érték visszaállításához az utoljára mentett beállításra. +# translation: A VISSZA NYÍL ikon azt jelzi, hogy az értéket megváltoztatták, és az nem egyezik meg az utolsó elmentett előbeállítással.\nKattintson a gombra az aktuális értéknek az utolsó elmentett előbeállításra történő visszaállításához. msgid "" "BACK ARROW icon indicates that the values this widget control were changed " "and at least one is not equal to the last saved preset.\n" @@ -819,44 +336,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:426 -#Similar to me: Base Layer height -# 5 changes: First layer height -# translation: Első réteg magasság -# 5 changes: Layer height -# translation: Réteg magasság -msgid "Base Layer height" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:399 -#Similar to me: Bed on thumbnail -# 6 changes: Change thumbnail -# translation: Bélyegkép módosítása -msgid "Bed on thumbnail" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:597 -#Similar to me: Bed temperature for layers after the first one. Set zero to disable bed temperature control commands in the output. -# 8 changes: Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output. -# translation: Tárgyasztal hőmérséklet az első réteg után. Ha ezt nullára állítja, akkor nem kerülnek a kimenetre a tárgyasztal hőmérsékletét szabályozó parancsok. -# 25 changes: Nozzle temperature for layers after the first one. Set this to zero to disable temperature control commands in the output G-code. -# translation: A fúvóka hőmérséklete az első réteg után. Állítsa ezt nullára, hogy a kimeneti G-kódban a hőmérsékletet befolyásoló parancsokat letiltsa. -# 38 changes: Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output. -# translation: Fűtött tárgyasztal hőmérséklete az első réteghez. Ha ezt nullára állítja, akkor nem kerülnek a kimenetre a tárgyasztal hőmérsékletét szabályozó parancsok. -msgid "" -"Bed temperature for layers after the first one. Set zero to disable bed " -"temperature control commands in the output." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1951 -msgid "Bed/Extruder leveling" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5473 +#: src/libslic3r/PrintConfig.cpp:5489 msgid "" "Before extruding an external perimeter, this flag will place the nozzle a " "bit inward and in advance of the seam position before unretracting. It will " @@ -867,29 +347,6 @@ msgstr "" msgid "Behavior" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3790 -msgid "Better bonding" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:106 -#, possible-boost-format -msgid "between %1%%% %2%%% over bridges" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:95 -#, possible-boost-format -msgid "between %1%%% %2%%% over external perimeters" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:111 -#, possible-boost-format -msgid "between %1%%% %2%%% over infill bridges" -msgstr "" - #: ../../ui_layout/default/printer_fff.ui msgid "Between extrusion role change G-code" msgstr "" @@ -907,44 +364,18 @@ msgstr "" msgid "Blacklisted libraries loaded into %1% process:" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:654 -#Similar to me: Bridge acceleration -# 7 changes: Bridge flow ratio -# translation: Híd áramlási arány -# 7 changes: Maximum accelerations -# translation: Maximum gyorsulások -msgid "Bridge acceleration" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:57 -#Similar to me: Bridge calibration -# 6 changes: Bridge flow ratio -# translation: Híd áramlási arány -msgid "Bridge calibration" -msgstr "" - #: ../../ui_layout/default/print.ui : l58 msgid "Bridge flow" msgstr "" -#: src/libslic3r/PrintConfig.cpp:720 +#: src/libslic3r/PrintConfig.cpp:721 #Similar to me: Bridge flow baseline # 6 changes: Bridge flow ratio -# translation: Híd áramlási arány +# translation: Híd átfolyási aránya msgid "Bridge flow baseline" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:1961 -#Similar to me: Bridge flow calibration -# 6 changes: Bridge flow ratio -# translation: Híd áramlási arány -msgid "Bridge flow calibration" -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: Bridge lines density # 8 changes: First layer density @@ -952,20 +383,10 @@ msgstr "" msgid "Bridge lines density" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1384 -msgid "Bridge margin" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:798 -#Similar to me: Bridge speed -# 4 changes: Print speed -# translation: Nyomtatási sebesség -msgid "Bridge speed" -msgstr "" - #: ../../ui_layout/default/print.ui : l57 +#Similar to me: Bridge speed and fan +# 8 changes: Bridge speed +# translation: Híd sebesség msgid "Bridge speed and fan" msgstr "" @@ -973,80 +394,35 @@ msgstr "" #Similar to me: Bridge type # 3 changes: Brim type # translation: Karima típus -# 4 changes: Printer type -# translation: Nyomtató típusa # 4 changes: Change type -# translation: Típus módosítása +# translation: Változás típusa +# 4 changes: Bridge speed +# translation: Híd sebesség msgid "Bridge type" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1383 -#Similar to me: Bridged -# 1 changes: Bridge -# translation: Híd -# 1 changes: Bridges -# translation: Hidak -msgid "Bridged" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:681 -#Similar to me: Bridging -# 3 changes: Bridge -# translation: Híd -# 3 changes: Bridges -# translation: Hidak -# 3 changes: Origin -# translation: Origó -msgid "Bridging" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:868 src/libslic3r/PrintConfig.cpp:918 +#: src/libslic3r/PrintConfig.cpp:869 src/libslic3r/PrintConfig.cpp:919 msgid "Brim & Skirt" msgstr "" -#: src/libslic3r/PrintConfig.cpp:869 +#: src/libslic3r/PrintConfig.cpp:870 +#Similar to me: Brim & Skirt acceleration +# 9 changes: Bridge acceleration +# translation: Híd gyorsulás +# 9 changes: Perimeter acceleration +# translation: Kerületi gyorsulás +# 10 changes: First layer acceleration +# translation: Első réteg gyorsulás msgid "Brim & Skirt acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:919 +#: src/libslic3r/PrintConfig.cpp:920 msgid "Brim & Skirt speed" msgstr "" - -#: src/slic3r/GUI/ConfigManipulation.cpp:228 -#Similar to me: Brim configuration -# 6 changes: &Configuration -# translation: Konfiguráció -# 6 changes: Loading configuration -# translation: Konfiguráció betöltése -msgid "Brim configuration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:883 -msgid "Brim ear detection length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:858 -msgid "Brim ear max angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:849 src/libslic3r/PrintConfig.cpp:850 -msgid "Brim ears" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:822 src/libslic3r/PrintConfig.cpp:823 -msgid "Brim inside holes" -msgstr "" - #: ../../ui_layout/default/printer_fff.ui #Similar to me: build volume # 4 changes: build %lu @@ -1055,19 +431,7 @@ msgid "build volume" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1809 -#, possible-c-format, possible-boost-format -#Similar to me: But since this version of %s we don't show this information in Printer Settings anymore.\nSettings will be available in physical printers settings. -# 10 changes: But since this version of PrusaSlicer we don't show this information in Printer Settings anymore.\nSettings will be available in physical printers settings. -# translation: De a PrusaSlicer ezen verziója óta már nem mutatjuk meg ezt az információt a nyomtató beállításaiban. \nA beállítások a fizikai nyomtatók beállításaiban lesznek elérhetőek. -msgid "" -"But since this version of %s we don't show this information in Printer " -"Settings anymore.\n" -"Settings will be available in physical printers settings." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5493 +#: src/libslic3r/PrintConfig.cpp:5509 #, possible-c-format, possible-boost-format msgid "" "By how much the 'wipe inside' can dive inside the object (if possible)?\n" @@ -1077,84 +441,45 @@ msgid "" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:392 -#, possible-c-format, possible-boost-format -msgid "" -"by the print profile maximum volumetric rate of %3.2f mm³/s at filament " -"speed %3.2f mm/s." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1996 -msgid "C&alibration" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:61 -#: src/slic3r/GUI/MainFrame.cpp:1966 -msgid "Calibration cube" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1901 -msgid "" -"Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily " -"needed" -msgstr "" - - #: src/slic3r/GUI/ConfigWizard.cpp:152 #, possible-boost-format msgid "Can't open directory '%1%'. Config bundles from here can't be loaded." msgstr "" -#: src/slic3r/Utils/Repetier.cpp:68 src/slic3r/Utils/Repetier.cpp:72 -#, possible-c-format, possible-boost-format -msgid "Can't process the repetier return message: missing field '%s'" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6182 -msgid "Casting" +#: src/libslic3r/PrintConfig.cpp:2581 +msgid "Cap gapfill speed with perimeter flow" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:949 -msgid "Chamber" +#: ../../ui_layout/default/print.ui : l281 +msgid "Cap with" msgstr "" -#: src/libslic3r/PrintConfig.cpp:950 -#Similar to me: Chamber temperature -# 6 changes: Bed temperature -# translation: Tárgyasztal hőmérséklet -# 6 changes: Nozzle temperature -# translation: Fúvóka hőmérséklet -msgid "Chamber temperature" +#: src/libslic3r/PrintConfig.cpp:2580 +msgid "Cap with perimeter flow" msgstr "" -#: src/libslic3r/PrintConfig.cpp:952 -msgid "" -"Chamber temperature. Note that this setting doesn't do anything, but you can " -"access it in Start G-code, Tool change G-code and the other ones, like for " -"other temperature settings." +#: src/libslic3r/PrintConfig.cpp:6198 +msgid "Casting" msgstr "" -#: ../../ui_layout/default/print.ui : l391 +#: ../../ui_layout/default/print.ui : l393 msgid "Change the bridge type and the bridge overlap to compute the same extrusions as when the PrusaSlicer 'thick bridge' isn't selected.\nAs long as it's selected, it will modify them.\nUnselect it to deactivate this enforcement." msgstr "" #: ../../ui_layout/default/print.ui : l4 -msgid "Change the perimeter extrusion width to ensure that there is an exact number of perimeters for this wall value. It won't put the width below the nozzle diameter, and up to double the size of the nozzle." +msgid "Change the perimeter extrusion widths to ensure that there is an exact number of perimeters for this wall thickness value. It won't put the perimeter width below the nozzle diameter, and up to double.\nNote that the value displayed is just a view of the current perimeter thickness, like the info text below. The number of perimeters used to compute this value is one loop, or the custom variable 'wall_thickness_lines' (advanced mode) if defined.\nIf the value is too low, it will revert the widths to the saved value.\nIf the value is set to 0, it will show 0." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:902 +#: src/slic3r/GUI/Preferences.cpp:921 #Similar to me: Changing some options will trigger application restart.\nYou will lose the content of the platter. # 1 changes: Changing some options will trigger application restart.\nYou will lose the content of the plater. # translation: Egyes beállítások megváltoztatása az alkalmazás újraindítását eredményezi. \nA tárgyasztal tartalmát elveszíti. +# 21 changes: Switching the language will trigger application restart.\nYou will lose content of the platter. +# translation: A nyelv megváltoztatásához újra kell indítani az alkalmazást.\nElveszítheti a tálca tartalmát. # 22 changes: Switching the language will trigger application restart.\nYou will lose content of the plater. # translation: A nyelv megváltoztatása újraindítja az alkalmazást.\nElveszíti a tárgyasztal tartalmát. msgid "" @@ -1163,71 +488,22 @@ msgid "" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:461 +#: src/slic3r/GUI/Preferences.cpp:716 msgid "Check for problematic dynamic libraries" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2699 -msgid "Choose how many digits after the dot for extruder moves." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2692 -msgid "Choose how many digits after the dot for xyz coordinates." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1124 -msgid "Choose how the windows are selectable and displayed:" -msgstr "" - - -#: src/slic3r/GUI/FreeCADDialog.cpp:307 src/slic3r/GUI/FreeCADDialog.cpp:347 -#Similar to me: Choose one file (py): -# 7 changes: Choose one file (3MF/AMF): -# translation: Válasszon ki egy fájlt (3MF/AMF): -# 8 changes: Choose one PNG file: -# translation: Válasszon egy PNG-fájlt: -msgid "Choose one file (py):" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:692 +#: src/slic3r/GUI/Preferences.cpp:652 msgid "" "Choose the gui package to use. It controls colors, settings layout, quick " "settings, tags (simple/expert)." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:420 -msgid "Choose the image to use as splashscreen" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2877 -msgid "" -"Choose the way the dense layer is laid out. The automatic option lets it try " -"to draw the smallest surface with only strait lines inside the sparse " -"infill. The Anchored option just slightly enlarges (by 'Default infill " -"margin') the surfaces that need a better support." -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:255 -msgid "Chrono" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3451 src/slic3r/GUI/GUI_Preview.cpp:255 -msgid "Chronology" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:493 +#: src/libslic3r/PrintConfig.cpp:494 #Similar to me: Client Certificate File # 8 changes: Open CA certificate file -# translation: CA tanúsítvány fájl megnyitása +# translation: CA tanúsítványfájl megnyitása msgid "Client Certificate File" msgstr "" @@ -1265,50 +541,18 @@ msgstr "" msgid "Closing %1%. Current project is modified." msgstr "" - -#: src/slic3r/GUI/GUI_Preview.cpp:1175 -#Similar to me: Col/C -# 2 changes: Color -# translation: Szín -msgid "Col/C" -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:1300 src/slic3r/GUI/Plater.cpp:1312 -#: src/slic3r/GUI/Plater.cpp:1360 src/slic3r/GUI/Plater.cpp:1375 -#, possible-boost-format -#Similar to me: Color %1% at extruder %2% -# 9 changes: Filament at extruder %1% -# translation: Filament %1% extrudernél _ -msgid "Color %1% at extruder %2%" -msgstr "" - #: ../../ui_layout/default/printer_fff.ui +#Similar to me: Color override +# 5 changes: Z-lift override +# translation: Z-emelés felülbírálása msgid "Color override" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:778 +#: src/slic3r/GUI/Preferences.cpp:797 msgid "Color template used by the icons on the platter." msgstr "" - -#: src/slic3r/GUI/Preferences.cpp:733 -#Similar to me: Colors -# 1 changes: Color -# translation: Szín -# 2 changes: &Color -# translation: S&zín -# 2 changes: Colour -# translation: S&zín -msgid "Colors" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:731 -msgid "Colors and Dark mode" -msgstr "" - #: ../../ui_layout/default/printer_fff.ui #Similar to me: Colour Change G-code # 1 changes: Color Change G-code @@ -1316,4775 +560,1239 @@ msgstr "" # 2 changes: Color change G-code # translation: Színváltás G-kód # 5 changes: Tool change G-code -# translation: G-kód Szerszám Váltás +# translation: Szerszámcsere G-kód msgid "Colour Change G-code" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1292 src/libslic3r/PrintConfig.cpp:1322 -#: src/libslic3r/PrintConfig.cpp:1353 src/libslic3r/PrintConfig.cpp:5017 -msgid "Concentric (filled)" +#: ../../ui_layout/default/print.ui : l143 +#Similar to me: Connection length +# 5 changes: Retraction length +# translation: Visszahúzási hossz +# 6 changes: Retraction Length +# translation: Visszahúzási hossz +msgid "Connection length" msgstr "" +#: ../../ui_layout/default/print.ui +#Similar to me: Convert round vertical holes to polyholes +# 9 changes: Convert round holes to polyholes +# translation: Kerek lyukak átalakítása többlyukúvá +msgid "Convert round vertical holes to polyholes" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:2746 -#Similar to me: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. \nSet this parameter to zero to disable anchoring perimeters connected to a single infill line. -# 8 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line. -# translation: Kitöltési vonal belső kerülethez való csatlakoztatása egy rövid kerület szakasszal. Ha százalékban van kifejezve (példa: 150%), akkor azt a kitöltési extrudálás szélességére kell vonatkoztatni.\nA PrusaSlicer megpróbál két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha nem talál ilyen, az infill_anchor_max-nál rövidebb kerületi szegmenst, akkor a kitöltési vonalat csak az egyik oldalon kapcsolja a kerületi szegmenshez, és a felvett kerületi szegmens hossza erre a paraméterre korlátozódik, de nem lehet hosszabb, mint a anchor_length_max.\nHa ezt a paramétert nullára állítja, akkor a szabadon álló kitöltési vonalak kerületi szakaszokhoz való lehorgonyzását kikapcsolja. -# 96 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring. -# translation: Kitöltési vonal belső kerülethez való csatlakoztatása egy rövid kerület szakasszal. Ha százalékban van kifejezve (példa: 150%), akkor azt a kitöltési extrudálás szélességére kell vonatkoztatni.\nA PrusaSlicer megpróbál két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha nem talál ennél a paraméternél rövidebb kerületi szegmenst, a kitöltési vonalat csak az egyik oldalon kapcsolja a kerületi szegmenshez, és a felvett kerületi szegmens hossza az infill_anchor értékre korlátozódik, de nem lehet hosszabb, mint ez a paraméter.\nA lehorgonyzás kikapcsolásához állítsa ezt a paramétert nullára. -msgid "" -"Connect an infill line to an internal perimeter with a short segment of an " -"additional perimeter. If expressed as percentage (example: 15%) it is " -"calculated over infill extrusion width. Slic3r tries to connect two close " -"infill lines to a short perimeter segment. If no such perimeter segment " -"shorter than infill_anchor_max is found, the infill line is connected to a " -"perimeter segment at just one side and the length of the perimeter segment " -"taken is limited to this parameter, but no longer than anchor_length_max. \n" -"Set this parameter to zero to disable anchoring perimeters connected to a " -"single infill line." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2773 -#Similar to me: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. \nIf set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0. -# 100 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring. -# translation: Kitöltési vonal belső kerülethez való csatlakoztatása egy rövid kerület szakasszal. Ha százalékban van kifejezve (példa: 150%), akkor azt a kitöltési extrudálás szélességére kell vonatkoztatni.\nA PrusaSlicer megpróbál két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha nem talál ennél a paraméternél rövidebb kerületi szegmenst, a kitöltési vonalat csak az egyik oldalon kapcsolja a kerületi szegmenshez, és a felvett kerületi szegmens hossza az infill_anchor értékre korlátozódik, de nem lehet hosszabb, mint ez a paraméter.\nA lehorgonyzás kikapcsolásához állítsa ezt a paramétert nullára. -# 133 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line. -# translation: Kitöltési vonal belső kerülethez való csatlakoztatása egy rövid kerület szakasszal. Ha százalékban van kifejezve (példa: 150%), akkor azt a kitöltési extrudálás szélességére kell vonatkoztatni.\nA PrusaSlicer megpróbál két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha nem talál ilyen, az infill_anchor_max-nál rövidebb kerületi szegmenst, akkor a kitöltési vonalat csak az egyik oldalon kapcsolja a kerületi szegmenshez, és a felvett kerületi szegmens hossza erre a paraméterre korlátozódik, de nem lehet hosszabb, mint a anchor_length_max.\nHa ezt a paramétert nullára állítja, akkor a szabadon álló kitöltési vonalak kerületi szakaszokhoz való lehorgonyzását kikapcsolja. -msgid "" -"Connect an infill line to an internal perimeter with a short segment of an " -"additional perimeter. If expressed as percentage (example: 15%) it is " -"calculated over infill extrusion width. Slic3r tries to connect two close " -"infill lines to a short perimeter segment. If no such perimeter segment " -"shorter than this parameter is found, the infill line is connected to a " -"perimeter segment at just one side and the length of the perimeter segment " -"taken is limited to infill_anchor, but no longer than this parameter. \n" -"If set to 0, the old algorithm for infill connection will be used, it should " -"create the same result as with 1000 & 0." +#: ../../ui_layout/default/printer_fff.ui +#Similar to me: Cooling fan +# 4 changes: Cooling +# translation: Hűtés +msgid "Cooling fan" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2803 src/libslic3r/PrintConfig.cpp:2821 -#: src/libslic3r/PrintConfig.cpp:2839 src/libslic3r/PrintConfig.cpp:2857 -msgid "Connected" +#: src/slic3r/Utils/OctoPrint.cpp:324 +#Similar to me: Could not connect to Monoprice lcd +# 10 changes: Could not connect to OctoPrint +# translation: Nem sikerült csatlakozni az OctoPrinthez +# 11 changes: Could not connect to Prusa SLA +# translation: Nem tudott csatlakozni a Prusa SLA-hoz +# 11 changes: Could not connect to Repetier +# translation: Nem sikerült csatlakozni az Repetierhez +msgid "Could not connect to Monoprice lcd" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2804 src/libslic3r/PrintConfig.cpp:2822 -#: src/libslic3r/PrintConfig.cpp:2840 src/libslic3r/PrintConfig.cpp:2858 -msgid "Connected to hole perimeters" +#: src/slic3r/GUI/Plater.cpp:5635 +#Similar to me: Create a new project? +# 4 changes: Creating a new project +# translation: Új projekt létrehozása +# 6 changes: Start a new project +# translation: Új projekt indítása +msgid "Create a new project?" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2823 -#: src/libslic3r/PrintConfig.cpp:2841 src/libslic3r/PrintConfig.cpp:2859 -msgid "Connected to outer perimeters" +#: src/slic3r/GUI/MainFrame.cpp:1975 +msgid "Create an mosaic-like tile with filament changes." msgstr "" -#: ../../ui_layout/default/print.ui : l143 -#Similar to me: Connection length -# 6 changes: Retraction Length -# translation: Visszahúzás hossza -msgid "Connection length" +#: ../../ui_layout/default/print.ui +msgid "Curve smoothing" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2829 -msgid "Connection of bottom infill lines" +#: src/libslic3r/PrintConfig.cpp:496 +#Similar to me: Custom Client certificate file can be specified for 2-way ssl authentication, in p12/pfx format. If left blank, no client certificate is used. +# 56 changes: Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used. +# translation: Egyedi hitelesítésszolgáltatói tanúsítványfájl adható meg a HTTPS OctoPrint kapcsolatokhoz, crt/pem formátumban. Ha üresen hagyja, akkor az alapértelmezett operációs rendszer hitelesítésszolgáltatói tanúsítványtárat használja. +msgid "" +"Custom Client certificate file can be specified for 2-way ssl " +"authentication, in p12/pfx format. If left blank, no client certificate is " +"used." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2847 -msgid "Connection of solid infill lines" +#: src/libslic3r/PrintConfig.cpp:5411 +msgid "Decelerate with target acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2793 -msgid "Connection of sparse infill lines" +#: src/libslic3r/PrintConfig.cpp:1177 +#Similar to me: Default speed +# 4 changes: Default fan speed +# translation: Alapértelmezett ventilátor sebesség +# 5 changes: Default color +# translation: Alapértelmezett szín +# 5 changes: Default font +# translation: Az alapértelmezett nyomtató +msgid "Default speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2811 -msgid "Connection of top infill lines" +#: src/libslic3r/PrintConfig.cpp:6199 +msgid "Dental" msgstr "" - -#: src/slic3r/Utils/OctoPrint.cpp:303 -#, possible-c-format, possible-boost-format -#Similar to me: Connection to %s works correctly. -# 4 changes: Connection to Duet works correctly. -# translation: A kapcsolat az Duettel megfelelően működik. -# 7 changes: Connection to AstroBox works correctly. -# translation: A kapcsolat az AstroBox-szal megfelelően működik. -# 8 changes: Connection to PrusaLink works correctly. -# translation: A kapcsolat a PrusaLinkkel megfelelően működik. -msgid "Connection to %s works correctly." +#: ../../ui_layout/default/extruder.ui : l40 +#Similar to me: Depth +# 2 changes: tenth +# translation: tizedik +msgid "Depth" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:4808 -msgid "Contact distance on top of supports" +#: ../../ui_layout/default/extruder.ui : l26 +#Similar to me: Deretraction +# 1 changes: Deretractions +# translation: Visszavonások +# 3 changes: Retraction +# translation: Visszahúzás +# 4 changes: Retractions +# translation: Visszahúzások +msgid "Deretraction" msgstr "" +#: ../../ui_layout/default/printer_sla.ui +msgid "Display mirroring" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:4825 -msgid "Contact distance under the bottom of supports" +#: ../../ui_layout/default/print.ui +#Similar to me: Distance +# 3 changes: Instances +# translation: Példák +# 3 changes: Disable +# translation: Letiltás +msgid "Distance" msgstr "" -#: src/slic3r/GUI/AboutDialog.cpp:277 -#Similar to me: Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi and numerous others. -# 13 changes: Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and numerous others. -# translation: Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik és még sokan mások közreműködésével. +#: src/libslic3r/PrintConfig.cpp:4355 msgid "" -"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " -"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand " -"Rémi and numerous others." +"Distance between skirt and object(s) ; or from the brim if using draft " +"shield or you set 'skirt_distance_from_brim'." msgstr "" - -#: src/slic3r/GUI/GUI_App.cpp:285 -#Similar to me: Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others. -# 13 changes: Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others. -# translation: Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Mészáros Tamás, Lukas Matena, Vojtech Kral, David Kocik és még sokan mások közreműködésével.\nElső magyar nyelv: Zombori Attila & Nagy Dóra (zombifree@gmail.com), és később remélhetőleg sokan mások. -msgid "" -"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " -"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and " -"numerous others." +#: ../../ui_layout/default/print.ui +msgid "Enable ironing post-process" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:535 -#Similar to me: Controls -# 3 changes: Contents -# translation: Tartalom -msgid "Controls" +#: src/slic3r/GUI/Plater.cpp:5627 +#Similar to me: Erase all objects +# 6 changes: Select all objects +# translation: Minden objektum kijelölése +# 6 changes: Deletes all objects +# translation: Minden objektum törlése +# 6 changes: Label objects +# translation: Címkeobjektumok +msgid "Erase all objects" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5718 src/libslic3r/PrintConfig.cpp:5719 -msgid "Convert round holes to polyholes" +#: src/slic3r/GUI/MainFrame.cpp:1731 +#Similar to me: Export &Plate +# 5 changes: Export G-code +# translation: G-kód exportálása +# 5 changes: Export &G-code +# translation: G-kód &exportálás +msgid "Export &Plate" msgstr "" -#: ../../ui_layout/default/print.ui -msgid "Convert round vertical holes to polyholes" -msgstr "" -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Cooling fan -# 4 changes: Cooling -# translation: Hűtés -msgid "Cooling fan" +#: src/slic3r/GUI/MainFrame.cpp:1731 +msgid "Export current plate (options available in the dialog)" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2017 -#Similar to me: Cooling moves are gradually accelerated towards this speed. -# 4 changes: Cooling moves are gradually accelerating towards this speed. -# translation: A hűtési lépések fokozatosan felgyorsulnak erre a sebességre. -# 16 changes: Cooling moves are gradually accelerating beginning at this speed. -# translation: A hűtési lépések fokozatosan felgyorsulnak ettől a sebességtől kezdve. -msgid "Cooling moves are gradually accelerated towards this speed. " +#: src/slic3r/GUI/Preferences.cpp:303 +msgid "Export headers with date and time" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1996 -#Similar to me: Cooling moves are gradually accelerated, starting at this speed. -# 10 changes: Cooling moves are gradually accelerating beginning at this speed. -# translation: A hűtési lépések fokozatosan felgyorsulnak ettől a sebességtől kezdve. -# 14 changes: Cooling moves are gradually accelerating towards this speed. -# translation: A hűtési lépések fokozatosan felgyorsulnak erre a sebességre. -msgid "Cooling moves are gradually accelerated, starting at this speed. " +#: src/slic3r/GUI/Plater.cpp:6003 +#Similar to me: Export Platter: +# 6 changes: Exact pattern +# translation: Pontos minta +# 6 changes: Support pattern +# translation: Támaszték minta +msgid "Export Platter:" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:4286 -msgid "" -"Cost of moving the extruder. The highest penalty is when the point is the " -"furthest from the position of the extruder before extruding the external " -"perimeter" +#: ../../ui_layout/default/print.ui +#Similar to me: external perimeter +# 1 changes: External perimeter +# translation: Külső kerület +# 1 changes: external perimeters +# translation: külső kerületeket +# 2 changes: Internal perimeter +# translation: Belső kerület +msgid "external perimeter" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4276 -msgid "" -"Cost of placing the seam at a bad angle. The worst angle (max penalty) is " -"when it's flat." +#: src/libslic3r/PrintConfig.cpp:1469 +#Similar to me: External Perimeter acceleration +# 9 changes: Perimeter acceleration +# translation: Kerületi gyorsulás +# 12 changes: External perimeters spacing +# translation: Külső kerületek távolsága +# 12 changes: External perimeter fan speed +# translation: Külső kerületi ventilátor sebessége +msgid "External Perimeter acceleration" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:4265 -msgid "Cost-based" +#: ../../ui_layout/default/print.ui +#Similar to me: External perimeter first +# 1 changes: External perimeters first +# translation: Először a külső kerületek +# 5 changes: External perimeters +# translation: Külső kerületek +# 5 changes: External perimeters width +# translation: Külső kerület szélessége +msgid "External perimeter first" msgstr "" -#: src/slic3r/Utils/AstroBox.cpp:85 src/slic3r/Utils/FlashAir.cpp:69 -#: src/slic3r/Utils/OctoPrint.cpp:176 src/slic3r/Utils/Repetier.cpp:88 -#, possible-c-format, possible-boost-format -#Similar to me: Could not connect to %s -# 4 changes: Could not connect to Duet -# translation: Nem sikerült csatlakozni az Duethez -# 7 changes: Could not connect to AstroBox -# translation: Nem sikerült csatlakozni az AstroBoxhoz -# 7 changes: Could not connect to FlashAir -# translation: Nem sikerült csatlakozni a FlashAirhez -msgid "Could not connect to %s" +#: src/libslic3r/PrintConfig.cpp:1505 +#Similar to me: External perimeters in vase mode +# 3 changes: ExternalPerimeter in vase mode +# translation: Külső kerület váza módban +# 10 changes: External perimeter fan speed +# translation: Külső kerületi ventilátor sebessége +# 10 changes: External perimeters speed +# translation: Külső kerületi sebesség +msgid "External perimeters in vase mode" msgstr "" - -#: src/slic3r/Utils/Http.cpp:106 -#Similar to me: Could not detect system SSL certificate store. The slicer will be unable to establish secure network connections. -# 6 changes: Could not detect system SSL certificate store. PrusaSlicer will be unable to establish secure network connections. -# translation: Nem sikerült észlelni a rendszer SSL-tanúsítványtárolóját. A PrusaSlicer nem tud biztonságos hálózati kapcsolatot létrehozni. -msgid "" -"Could not detect system SSL certificate store. The slicer will be unable to " -"establish secure network connections." +#: ../../ui_layout/default/print.ui +#Similar to me: Extra perimeters +# 3 changes: External perimeters +# translation: Külső kerületek +# 4 changes: External perimeter +# translation: Külső kerület +# 4 changes: external perimeters +# translation: külső kerületeket +msgid "Extra perimeters" msgstr "" - -#: src/slic3r/GUI/Plater.cpp:5670 -#Similar to me: Create a new project? -# 4 changes: Creating a new project -# translation: Új projekt létrehozása -# 6 changes: Start a new project -# translation: Új projekt elkezdése -msgid "Create a new project?" +#: ../../ui_layout/default/extruder.ui : l46 +msgid "Extra unretraction" msgstr "" +#: ../../ui_layout/default/print.ui +#Similar to me: Extruder clearance (mm) +# 5 changes: Extruder clearance +# translation: Extruder körüli szabad tér +# 6 changes: Extruder clearance height +# translation: Extruder szabad magassága +# 6 changes: Extruder clearance radius +# translation: Extruder távolsági sugár +msgid "Extruder clearance (mm)" +msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1951 -msgid "Create a test print to help you to level your printer bed." +#: ../../ui_layout/default/print.ui +#Similar to me: Extrusion direction +# 7 changes: Extrusion width +# translation: Extrudálási szélesség +# 7 changes: Extrusion Width +# translation: Extrudálási Szélesség +msgid "Extrusion direction" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1961 -msgid "Create a test print to help you to set your bridge flow ratio." +#: src/slic3r/GUI/GCodeViewer.cpp:3453 +msgid "Extrusion section (mm³/mm)" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1954 -msgid "" -"Create a test print to help you to set your filament extrusion multiplier." +#: src/libslic3r/GCode.cpp:789 +msgid "Extrusion type change G-code" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:1956 -msgid "Create a test print to help you to set your filament temperature." +#: ../../ui_layout/default/filament.ui +msgid "Fan speed - default" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1963 +#: src/libslic3r/PrintConfig.cpp:1306 msgid "" -"Create a test print to help you to set your over-bridge flow ratio and " -"ironing pattern." +"Fill pattern for bottom infill. This only affects the bottom visible layer, " +"and not its adjacent solid shells.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1958 -msgid "Create a test print to help you to set your retraction length." +#: src/libslic3r/PrintConfig.cpp:2235 +msgid "" +"Fill pattern for general low-density infill.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1980 -msgid "Create an mosaic-like tile with filament changes." +#: src/libslic3r/PrintConfig.cpp:1334 +#Similar to me: Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear in most cases. You can try ironing for translucent material. Rectilinear (filled) replaces zig-zag patterns by a single big line & is more efficient for filling little spaces.\nIf you want an 'aligned' pattern, set 90° to the fill angle increment setting. +# 80 changes: Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear in most cases. You can try ironing for translucent material. Rectilinear (filled) replaces zig-zag patterns by a single big line & is more efficient for filling little spaces. +# translation: Töltési minta tömör (belső) kitöltéshez. Ez csak a szilárd, nem látható rétegeket érinti. A legtöbb esetben egyenes vonalat kell használni. Az áttetsző anyagokhoz kipróbálhatja a vasalást. Az egyenes vonalú (töltött) egyetlen nagy vonallal helyettesíti a cikk-cakk mintákat, és hatékonyabban tölti ki a kis helyeket. +msgid "" +"Fill pattern for solid (internal) infill. This only affects the solid not-" +"visible layers. You should use rectilinear in most cases. You can try " +"ironing for translucent material. Rectilinear (filled) replaces zig-zag " +"patterns by a single big line & is more efficient for filling little " +"spaces.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1975 -msgid "Create an object by writing little easy script." +#: src/libslic3r/PrintConfig.cpp:1275 +msgid "" +"Fill pattern for top infill. This only affects the top visible layer, and " +"not its adjacent solid shells.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" - -#: src/slic3r/Utils/Http.cpp:124 -#Similar to me: CURL init has failed. The slicer will be unable to establish network connections. See logs for additional details. -# 6 changes: CURL init has failed. PrusaSlicer will be unable to establish network connections. See logs for additional details. -# translation: A CURL inicializálása nem sikerült. A PrusaSlicer nem tud hálózati kapcsolatot létrehozni. További részletekért lásd a naplókat. -msgid "" -"CURL init has failed. The slicer will be unable to establish network " -"connections. See logs for additional details." +#: ../../ui_layout/default/print.ui +#Similar to me: Filtering +# 3 changes: Filter +# translation: Szűrő +msgid "Filtering" msgstr "" #: ../../ui_layout/default/print.ui -msgid "Curve smoothing" +#Similar to me: first layer +# 1 changes: First layer +# translation: Első réteg +# 4 changes: First page +# translation: Következő oldal +msgid "first layer" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1134 -msgid "Curve smoothing cutoff dist" +#: src/libslic3r/Print.cpp:836 +#, possible-c-format, possible-boost-format +#Similar to me: First layer height can't be lower than %s +# 5 changes: First layer height can't be thinner than %s +# translation: Az első réteg magassága nem lehet vékonyabb, mint %s +# 5 changes: First layer height can't be greater than %s +# translation: Az első réteg magassága nem lehet nagyobb, mint %s +# 11 changes: Layer height can't be higher than %s +# translation: A réteg magassága nem lehet magasabb, mint %s +msgid "First layer height can't be lower than %s" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1104 -msgid "Curve smoothing minimum angle (concave)" +#: src/slic3r/GUI/Tab.cpp:3028 +#Similar to me: Flat time compensation +# 7 changes: XY Size Compensation +# translation: XY méret kompenzáció +# 8 changes: XY holes compensation +# translation: X-Y lyukak kompenzálása +msgid "Flat time compensation" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1089 -msgid "Curve smoothing minimum angle (convex)" +#: src/libslic3r/PrintConfig.cpp:6197 +msgid "Flexible" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1118 -msgid "Curve smoothing precision" +#: ../../ui_layout/default/print.ui +#Similar to me: Flow ratio +# 2 changes: Flow rate +# translation: Áramlási sebesség +msgid "Flow ratio" msgstr "" -#: src/libslic3r/PrintConfig.cpp:495 -#Similar to me: Custom Client certificate file can be specified for 2-way ssl authentication, in p12/pfx format. If left blank, no client certificate is used. -# 56 changes: Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used. -# translation: Egyedi hitelesítésszolgáltatói (CA) tanúsítványfájl adható meg a HTTPS OctoPrint kapcsolatokhoz, crt/pem formátumban.\n\nHa üresen hagyja, akkor az operációs rendszer alapértelmezett hitelesítésszolgáltatói (CA) tanúsítványtárát használja. -msgid "" -"Custom Client certificate file can be specified for 2-way ssl " -"authentication, in p12/pfx format. If left blank, no client certificate is " -"used." +#: src/slic3r/GUI/Preferences.cpp:506 +msgid "Focusing platter on mouse over" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1769 -msgid "Custom Filament variables" +#: src/libslic3r/PrintConfig.cpp:406 +#Similar to me: Format of G-code thumbnails +# 10 changes: G-code thumbnails +# translation: G-kód miniatűrök +msgid "Format of G-code thumbnails" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3595 -msgid "Custom Print variables" +#: src/libslic3r/PrintConfig.cpp:407 +msgid "" +"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " +"QOI for low memory firmware" msgstr "" +#: ../../ui_layout/default/milling.ui +#Similar to me: G-Code +# 1 changes: G-code +# translation: G-kód +msgid "G-Code" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:3943 -#Similar to me: Custom Printer variables -# 9 changes: Custom Printer Setup -# translation: Egyedi Nyomtató Beállítás -msgid "Custom Printer variables" +#: ../../ui_layout/default/print.ui +#Similar to me: Gap Fill +# 1 changes: Gap fill +# translation: Hézag kitöltés +# 3 changes: Top fill +# translation: Felső kitöltés +msgid "Gap Fill" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1768 src/libslic3r/PrintConfig.cpp:3594 -#: src/libslic3r/PrintConfig.cpp:3942 -#Similar to me: Custom variables -# 6 changes: Custom Printer -# translation: Egyedi Nyomtató -msgid "Custom variables" +#: src/libslic3r/PrintConfig.cpp:2567 +#Similar to me: Gap fill acceleration +# 4 changes: Infill acceleration +# translation: Kitöltési gyorsulás +# 7 changes: Default acceleration +# translation: Alapértelmezett gyorsítás +# 7 changes: Travel acceleration +# translation: Utazás gyorsítása +msgid "Gap fill acceleration" msgstr "" +#: ../../ui_layout/default/printer_fff.ui +#Similar to me: Gcode precision +# 5 changes: Gcode preview +# translation: G-kód előnézet +# 6 changes: G-code preview +# translation: G-kód előnézet +msgid "Gcode precision" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:1133 -msgid "cutoff" +#: ../../ui_layout/default/extruder.ui +msgid "General wipe" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1430 -msgid "Cutting corners" +#: src/slic3r/GUI/Preferences.cpp:785 +#Similar to me: Gui Colors +# 2 changes: Gui color +# translation: Gui szín +# 4 changes: Colors +# translation: Színek +msgid "Gui Colors" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5395 -msgid "Decelerate with target acceleration" +#: src/libslic3r/PrintConfig.cpp:6200 +msgid "Heat-resistant" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1146 -#Similar to me: Default acceleration -# 8 changes: Maximum accelerations -# translation: Maximum gyorsulások -msgid "Default acceleration" +#: src/slic3r/GUI/Preferences.cpp:623 +msgid "Hide tooltips on slice buttons" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1226 -msgid "Default distance between objects" +#: ../../ui_layout/default/printer_sla.ui : l15 +msgid "horizontal" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1228 +#: src/libslic3r/PrintConfig.cpp:833 +#Similar to me: Horizontal width of the brim that will be printed around each object on the first layer.\nWhen raft is used, no brim is generated (use raft_first_layer_expansion). +# 7 changes: The horizontal width of the brim that will be printed around each object on the first layer. When raft is used, no brim is generated (use raft_first_layer_expansion). +# translation: A karima vízszintes szélessége, amely az első réteg minden egyes objektuma köré nyomtatásra kerül. Tutaj használatakor a rendszer nem generál karimát. (használja a raft_first_layer_expansion-t). msgid "" -"Default distance used for the auto-arrange feature of the platter.\n" -"Set to 0 to use the last value instead." +"Horizontal width of the brim that will be printed around each object on the " +"first layer.\n" +"When raft is used, no brim is generated (use raft_first_layer_expansion)." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1720 -#Similar to me: Default extrusion spacing -# 7 changes: Default extrusion width -# translation: Alapértelmezett extrudálási szélesség -msgid "Default extrusion spacing" +#: src/slic3r/GUI/Preferences.cpp:689 +msgid "Icon" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3452 src/libslic3r/PrintConfig.cpp:3453 -msgid "Default fan speed" +#: ../../ui_layout/default/extruder.ui +msgid "idx" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2443 -#Similar to me: Default first layer speed -# 9 changes: First layer speed -# translation: Sebesség az első rétegnél -msgid "Default first layer speed" +#: src/slic3r/GUI/Preferences.cpp:508 +msgid "" +"If disabled, moving the mouse over the platter panel will not change the " +"focus but some shortcuts from the platter may not work. If enabled, moving " +"the mouse over the platter panel will move focus there, and away from the " +"current control." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1372 -msgid "Default infill margin" +#: src/libslic3r/PrintConfig.cpp:2458 +#Similar to me: If expressed as absolute value in mm/s, this speed will be usedf as a max over all the print moves of the first object layer above raft interface, regardless of their type.\nIf expressed as a percentage it will scale the current speed (max 100%).\nSet it at 100% to remove this speed modification. +# 92 changes: If expressed as absolute value in mm/s, this speed will be applied to all the print moves of the first object layer above raft interface, regardless of their type. If expressed as a percentage (for example: 40%) it will scale the default speeds. +# translation: Ha abszolút értékként van megadva mm/s-ban, akkor ez a sebesség a tutajfelület feletti első objektumréteg összes nyomtatási feladatára vonatkozik, függetlenül azok típusától. Ha százalékban van megadva (például: 40%), akkor az alapértelmezett sebességeket skálázza. +# 110 changes: If expressed as absolute value in mm/s, this speed will be applied as a maximum to all the print moves (but infill) of the first layer.\nIf expressed as a percentage it will scale the current speed.\nSet it at 100% to remove any first layer speed modification (but for infill). +# translation: Ha abszolút értékként van megadva mm/mp-ben, akkor ez a sebesség az első réteg minden nyomtatási műveletére (kivéve a kitöltést) maximálisan érvényes.\nHa százalékban van megadva, akkor az aktuális sebességet skálázza.\nHa 100%-ra állítja be, akkor az első réteg sebességének módosítása megszűnik (kivéve a kitöltésnél). +msgid "" +"If expressed as absolute value in mm/s, this speed will be usedf as a max " +"over all the print moves of the first object layer above raft interface, " +"regardless of their type.\n" +"If expressed as a percentage it will scale the current speed (max 100%).\n" +"Set it at 100% to remove this speed modification." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1176 -#Similar to me: Default speed -# 5 changes: Default color -# translation: Alapértelmezett szín -# 5 changes: Default font -# translation: Az alapértelmezett nyomtató -msgid "Default speed" +#: src/libslic3r/PrintConfig.cpp:5414 +msgid "" +"If selected, the deceleration of a travel will use the acceleration value of " +"the extrusion that will be printed after it (if any) " msgstr "" -#: src/libslic3r/PrintConfig.cpp:6558 -#Similar to me: Defines the pad cavity depth. Set zero to disable the cavity. Be careful when enabling this feature, as some resins may produce an extreme suction effect inside the cavity, which makes peeling the print off the vat foil difficult. -# 3 changes: Defines the pad cavity depth. Set to zero to disable the cavity. Be careful when enabling this feature, as some resins may produce an extreme suction effect inside the cavity, which makes peeling the print off the vat foil difficult. -# translation: Meghatározza a párnaüreg mélységét. Az üreg kikapcsolásához állítsa nullára. Legyen óvatos a funkció engedélyezésekor, mivel egyes gyanták extrém szívóhatást fejthetnek ki az üregben, ami megnehezíti a nyomtatás lehúzását a kádfóliáról. +#: src/slic3r/GUI/Preferences.cpp:305 msgid "" -"Defines the pad cavity depth. Set zero to disable the cavity. Be careful " -"when enabling this feature, as some resins may produce an extreme suction " -"effect inside the cavity, which makes peeling the print off the vat foil " -"difficult." +"If this is enabled, Slic3r will add the date of the export to the first line " +"of any exported config and gcode file. Note that some software may rely on " +"that to work, be careful and report any problem if you deactivate it." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2875 -msgid "Dense infill algorithm" +#: src/slic3r/GUI/Preferences.cpp:812 +#, possible-c-format, possible-boost-format +msgid "" +"If you use a color with higher than 80% saturation and/or value, these will " +"be increased. If lower, they will be decreased." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2865 src/libslic3r/PrintConfig.cpp:2866 -msgid "Dense infill layer" +#: src/slic3r/GUI/Plater.cpp:5960 +msgid "Include modifiers" msgstr "" -#: src/libslic3r/PrintConfig.cpp:6183 -msgid "Dental" -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l40 -#Similar to me: Depth -# 2 changes: tenth -# translation: tizedik -msgid "Depth" +#: src/slic3r/GUI/Plater.cpp:5961 +#Similar to me: Include presets +# 6 changes: Compare presets +# translation: Előbeállítások összehasonlítása +msgid "Include presets" msgstr "" -#: src/slic3r/GUI/GUI_Preview.cpp:1172 -#Similar to me: Dere. -# 2 changes: Done. -# translation: Kész. -msgid "Dere." +#: src/slic3r/GUI/Plater.cpp:5958 +#Similar to me: Include supports +# 5 changes: Enforce supports +# translation: Támogatás kikényszerítése +# 6 changes: Block supports +# translation: Blokktámaszok +# 6 changes: Add supports +# translation: Támaszok hozzáadása +msgid "Include supports" msgstr "" -#: ../../ui_layout/default/extruder.ui : l26 -#Similar to me: Deretraction -# 1 changes: Deretractions -# translation: Előretolások_ -# 3 changes: Retraction -# translation: Visszahúzás -# 4 changes: Direction -# translation: Irány -msgid "Deretraction" +#: ../../ui_layout/default/print.ui : l171 +msgid "increment" msgstr "" +#: ../../ui_layout/default/filament.ui : l35 +#Similar to me: Infill bridges +# 5 changes: Internal bridges +# translation: Belső hidak +# 5 changes: Infill width +# translation: Kitöltési szélesség +# 5 changes: Thick bridges +# translation: Vastag hidak +msgid "Infill bridges" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:5144 -msgid "" -"Detect single-width walls (parts where two extrusions don't fit and we need " -"to collapse them into a single trace). If unchecked, Slic3r may try to fit " -"perimeters where it's not possible, creating some overlap leading to over-" -"extrusion." +#: ../../ui_layout/default/print.ui +#Similar to me: Infill speed +# 4 changes: Gap fill speed +# translation: Hézagkitöltési sebesség +msgid "Infill speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:882 -msgid "Detection radius" +#: src/libslic3r/PrintConfig.cpp:669 +#Similar to me: Internal bridges acceleration +# 11 changes: Bridge acceleration +# translation: Híd gyorsulás +# 11 changes: Internal bridge speed +# translation: Belső híd sebessége +msgid "Internal bridges acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1854 -msgid "Determines whether toolchange temperatures will be applied" +#: src/libslic3r/PrintConfig.cpp:3793 +#Similar to me: Internal Perimeter acceleration +# 9 changes: Perimeter acceleration +# translation: Kerületi gyorsulás +# 12 changes: Internal perimeters speed +# translation: Belső kerületi sebesség +msgid "Internal Perimeter acceleration" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:304 -msgid "Dialogs" +#: src/libslic3r/PrintConfig.cpp:3035 +#Similar to me: Ironing acceleration +# 5 changes: Bridge acceleration +# translation: Híd gyorsulás +# 5 changes: Infill acceleration +# translation: Kitöltési gyorsulás +# 6 changes: Travel acceleration +# translation: Utazás gyorsítása +msgid "Ironing acceleration" msgstr "" +#: ../../ui_layout/default/print.ui +msgid "Ironing infill pattern tuning" +msgstr "" -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:39 -#Similar to me: Dimension: -# 4 changes: Direction -# translation: Irány -msgid "Dimension:" +#: ../../ui_layout/default/print.ui +msgid "Ironing post-process (This will go on top of infills and perimeters)" msgstr "" -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:34 -msgid "Dimensional accuracy (default)" +#: src/libslic3r/PrintConfig.cpp:3092 +#Similar to me: Ironing speed +# 4 changes: Loading speed +# translation: Betöltési sebesség +# 4 changes: Ironing Type +# translation: Vasalás típusa +# 4 changes: Print speed +# translation: Nyomtatási sebesség +msgid "Ironing speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3218 -#Similar to me: Disable -# 1 changes: Disabled -# translation: Letiltva -msgid "Disable" +#: src/libslic3r/PrintConfig.cpp:3094 +#Similar to me: Ironing speed. Used for the ironing pass of the ironing infill pattern, and the post-process infill.\nThis can be expressed as a percentage (for example: 80%) over the Top Solid Infill speed.\nIroning extrusions are ignored from the automatic volumetric speed computation. +# 44 changes: Ironing speed. Used for the ironing pass of the ironing infill pattern, and the post-process infill. Can be defined as mm.s, or a % of the top solid infill speed.\nIroning extrusions are ignored from the automatic volumetric speed computation. +# translation: Vasalási sebesség. A vasalási kitöltési minta vasalási menetéhez és a kitöltés utáni vasaláshoz használatos. Meghatározható mm-ben vagy a felső tömör kitöltési sebesség %-ában.\nA vasalási extrudálások figyelmen kívül maradnak az automatikus térfogatsebesség-számításnál. +msgid "" +"Ironing speed. Used for the ironing pass of the ironing infill pattern, and " +"the post-process infill.\n" +"This can be expressed as a percentage (for example: 80%) over the Top Solid " +"Infill speed.\n" +"Ironing extrusions are ignored from the automatic volumetric speed " +"computation." msgstr "" -#: src/libslic3r/PrintConfig.cpp:578 -msgid "Disable 'Avoid crossing perimeters' for the first layer." +#: src/slic3r/GUI/Preferences.cpp:826 +msgid "" +"It can be a good idea to use a bit darker color, as some hues can be a bit " +"difficult to read." msgstr "" -#: src/libslic3r/PrintConfig.cpp:3636 -#Similar to me: Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will probably be invisible). -# 6 changes: Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will be probably invisible). -# translation: Letiltja a visszahúzást, ha az utazási pálya nem lépi át a felső réteg kerületét (és így az esetleges trutyi valószínűleg láthatatlan lesz). +#: src/slic3r/GUI/Preferences.cpp:798 msgid "" -"Disables retraction when the travel path does not exceed the upper layer's " -"perimeters (and thus any ooze will probably be invisible)." +"It may need a lighter color, as it's used to replace white on top of a dark " +"background." msgstr "" -#: ../../ui_layout/default/printer_sla.ui -msgid "Display mirroring" -msgstr "" +#: src/libslic3r/PrintConfig.cpp:737 +msgid "Keep current flow" +msgstr "" -#: src/slic3r/GUI/Preferences.cpp:647 -msgid "Display setting icons" +#: ../../ui_layout/default/printer_fff.ui : l40 +msgid "Kickstart duration" msgstr "" #: ../../ui_layout/default/print.ui -#Similar to me: Distance -# 3 changes: Instances -# translation: Példányok -msgid "Distance" +msgid "Layer count" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4339 -msgid "" -"Distance between skirt and object(s) ; or from the brim if using draft " -"shield or you set 'skirt_distance_from_brim'." +#: src/libslic3r/Print.cpp:855 +#, possible-c-format, possible-boost-format +#Similar to me: Layer height can't be lower than %s +# 4 changes: Layer height can't be higher than %s +# translation: A réteg magassága nem lehet magasabb, mint %s +# 5 changes: Layer height can't be greater than %s +# translation: A réteg magassága nem lehet nagyobb, mint %s +# 12 changes: First layer height can't be thinner than %s +# translation: Az első réteg magassága nem lehet vékonyabb, mint %s +msgid "Layer height can't be lower than %s" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:4337 -#Similar to me: Distance from object -# 5 changes: Distance from brim/object -# translation: Távolság a karimától/objektumtól -msgid "Distance from object" +#: ../../ui_layout/default/filament.ui : l48 +#Similar to me: Layer time goal +# 4 changes: Layer time (log) +# translation: Réteg idő (log) +# 5 changes: Layer Time (log) +# translation: Rétegidő (napló) +# 5 changes: Layer time +# translation: Réteg idő +msgid "Layer time goal" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:2341 -msgid "Distribution" +#: ../../ui_layout/default/extruder.ui +msgid "Lift z enforcement" msgstr "" -#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:576 -msgid "Don't avoid crossing on 1st layer" +#: src/slic3r/GUI/Tab.cpp:4915 +#Similar to me: LOCKED LOCK icon indicates that the values this widget control are all the same as the system (or default) values. +# 27 changes: LOCKED LOCK icon indicates that the value is the same as the system (or default) value. +# translation: A LEZÁRT ZÁR ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy alapértelmezett) értékével. +msgid "" +"LOCKED LOCK icon indicates that the values this widget control are all the " +"same as the system (or default) values." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:206 -msgid "Don't switch" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5504 -msgid "" -"Don't wipe when you don't cross a perimeter. Need " -"'only_retract_when_crossing_perimeters'and 'wipe' enabled." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:32 -msgid "Each militer add this value to the retraction value." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:894 -#Similar to me: Ear pattern -# 4 changes: Fill pattern -# translation: Kitöltés mintázata -msgid "Ear pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3128 -msgid "" -"Emit something at 1 minute intervals into the G-code to let the firmware " -"show accurate remaining time." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5547 -msgid "Enable advanced wiping volume" +#: src/libslic3r/PrintConfig.cpp:3161 +msgid "M73 & M117" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2556 -msgid "Enable Gap fill" +#: src/slic3r/GUI/Preferences.cpp:811 +msgid "Main color template." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2558 -msgid "" -"Enable gap fill algorithm. It will extrude small lines between perimeters " -"when there is not enough space for another perimeter or an infill." +#: src/slic3r/GUI/Preferences.cpp:809 +msgid "Main Gui color template" msgstr "" -#: ../../ui_layout/default/print.ui -msgid "Enable ironing post-process" +#: ../../ui_layout/default/sla_material.ui +msgid "material_correction" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1884 -msgid "Enable Skinnydip string reduction" +#: src/libslic3r/PrintConfig.cpp:3400 +msgid "Max print speed for Autospeed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2626 -#Similar to me: Enable this to get a commented G-code file, with each line explained by descriptive text. If you print from an SD card, the additional weight of the file could make your firmware slow down. -# 5 changes: Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down. -# translation: Ha engedélyezi ezt a funkciót, akkor egy kommentezett G-kód fájlt kap, amelynek minden egyes sorát egy leíró szöveg magyarázza. Ha SD-kártyáról nyomtat, a fájl nagyobb mérete miatt a nyomtató vezérlő szoftvere lelassulhat. -msgid "" -"Enable this to get a commented G-code file, with each line explained by " -"descriptive text. If you print from an SD card, the additional weight of the " -"file could make your firmware slow down." +#: src/libslic3r/PrintConfig.cpp:2456 +#Similar to me: Max speed of object first layer over raft interface +# 5 changes: Speed of object first layer over raft interface +# translation: A tárgy első rétegének sebessége a tutajfelületen +# 17 changes: First object layer over raft interface +# translation: Első objektum réteg a tutaj felett +msgid "Max speed of object first layer over raft interface" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5519 -msgid "Enable wipe tower" +#: src/libslic3r/PrintConfig.cpp:5506 +msgid "Max Wipe deviation" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:2868 -#, possible-c-format, possible-boost-format -msgid "" -"Enables the creation of a support layer under the first solid layer. This " -"allows you to use a lower infill ratio without compromising the top quality. " -"The dense infill is laid out with a 50% infill density." +#: ../../ui_layout/default/print.ui : l280 +#Similar to me: maximum speed +# 5 changes: Max speed +# translation: Max sebesség +# 5 changes: Max fan speed +# translation: Max. ventilátor sebesség +msgid "maximum speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1361 -#, possible-c-format, possible-boost-format -msgid "Enforce 100% fill volume" +#: src/libslic3r/PrintConfig.cpp:5507 +msgid "Maximum Wipe deviation to the inside" msgstr "" -#: src/libslic3r/PrintConfig.cpp:386 -msgid "" -"Enforce a specific color on thumbnails. If not enforced, their color will be " -"the one defined by the filament." +#: src/libslic3r/GCode.cpp:818 +#Similar to me: Milling End G-code +# 5 changes: Filament End G-code +# translation: Filament Vége G-kód +# 6 changes: Filament end G-code +# translation: Nyomtatószál G-kód vége +msgid "Milling End G-code" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4186 -msgid "Enforce lift on first layer" +#: src/libslic3r/GCode.cpp:811 +#Similar to me: Milling Start G-code +# 5 changes: Filament Start G-code +# translation: Filament Kezdete G-kód +# 6 changes: Filament start G-code +# translation: Szál indítási G-kód +# 8 changes: Start G-code +# translation: G-kód indítása +msgid "Milling Start G-code" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4185 -msgid "Enforce on first layer" +#: src/libslic3r/PrintConfig.cpp:2601 +msgid "Min surface for gap filling" msgstr "" -#: src/libslic3r/PrintConfig.cpp:385 -msgid "Enforce thumbnail color" +#: src/libslic3r/PrintConfig.cpp:6755 +msgid "Minimum resolution in nanometers" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:4605 -msgid "" -"Ensure that the slicer won't add heating, fan, extruder... commands before " -"or just after your start-gcode.If set to true, you have to write a good and " -"complete start_gcode, as no checks are made anymore." +#: ../../ui_layout/default/extruder.ui : l45 +#Similar to me: Minimum retraction +# 7 changes: Minimum feedrates +# translation: Minimális adagolási sebességek +msgid "Minimum retraction" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5961 +#: src/libslic3r/PrintConfig.cpp:3708 +#, possible-c-format, possible-boost-format +#Similar to me: Minimum unsupported width for an extrusion to apply the bridge fan & overhang speed to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate overhangs. +# 10 changes: Minimum unsupported width for an extrusion to apply the bridge fan & overhang speed to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Egy extrudálás minimális nem alátámasztott szélessége, hogy a hídventilátor és a túlnyúlás sebességét erre a túlnyúlásra lehessen alkalmazni. Megadható mm-ben vagy a fúvóka átmérőjének %-ában. A kikapcsoláshoz állítsa 0-ra. +# 28 changes: Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Egy extrudálás minimális nem alátámasztott szélessége, hogy a hídáramlást erre a túlnyúlásra lehessen alkalmazni. Megadható mm-ben vagy a fúvóka átmérőjének %-ában. A kikapcsoláshoz állítsa 0-ra. msgid "" -"Enter here the gcode to end the toolhead action, like stopping the spindle. " -"You have access to {next_extruder} and {previous_extruder}. " -"previous_extruder is the 'extruder number' of the current milling tool, it's " -"equal to the index (begining at 0) of the milling tool plus the number of " -"extruders. next_extruder is the 'extruder number' of the next tool, it may " -"be a normal extruder, if it's below the number of extruders. The number of " -"extruder is available at {extruder}and the number of milling tool is " -"available at {milling_cutter}." +"Minimum unsupported width for an extrusion to apply the bridge fan & " +"overhang speed to this overhang. Can be in mm or in a % of the nozzle " +"diameter. Set to 0 to deactivate overhangs." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2062 +#: src/libslic3r/PrintConfig.cpp:3720 #, possible-c-format, possible-boost-format +#Similar to me: Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate bridge flow for overhangs. +# 26 changes: Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Egy extrudálás minimális nem alátámasztott szélessége, hogy a hídáramlást erre a túlnyúlásra lehessen alkalmazni. Megadható mm-ben vagy a fúvóka átmérőjének %-ában. A kikapcsoláshoz állítsa 0-ra. +# 44 changes: Minimum unsupported width for an extrusion to apply the bridge fan & overhang speed to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Egy extrudálás minimális nem alátámasztott szélessége, hogy a hídventilátor és a túlnyúlás sebességét erre a túlnyúlásra lehessen alkalmazni. Megadható mm-ben vagy a fúvóka átmérőjének %-ában. A kikapcsoláshoz állítsa 0-ra. msgid "" -"Enter the shrinkage percentage that the filament will get after cooling " -"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " -"compensate. Only the filament used for the perimeter is taken into account.\n" -"Be sure to allow enough space between objects, as this compensation is done " -"after the checks." -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:5661 -#Similar to me: Erase all objects -# 6 changes: Deletes all objects -# translation: Az összes objektum törlése -# 6 changes: Label objects -# translation: Objektumok címkézése -# 6 changes: Select all objects -# translation: Összes objektum kijelölése -msgid "Erase all objects" +"Minimum unsupported width for an extrusion to apply the bridge flow to this " +"overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to " +"deactivate bridge flow for overhangs." msgstr "" - -#: src/slic3r/GUI/GUI_App.cpp:945 src/slic3r/GUI/GUI_App.cpp:1042 -#, possible-boost-format -#Similar to me: Error parsing %1% config file, it is probably corrupted. Try to manually delete the file to recover from the error. -# 16 changes: Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to manually delete the file to recover from the error. -# translation: Hiba a PrusaGCodeViewer konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja meg manuálisan törölni a fájlt a hiba elhárításához. -msgid "" -"Error parsing %1% config file, it is probably corrupted. Try to manually " -"delete the file to recover from the error." +#: ../../ui_layout/default/print.ui : l29 +#Similar to me: Minimum width +# 1 changes: minimum width +# translation: minimális szélesség +# 4 changes: Min width +# translation: Min. szélesség +# 5 changes: Brim width +# translation: Peremszélesség +msgid "Minimum width" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:940 src/slic3r/GUI/GUI_App.cpp:1037 -#, possible-boost-format -#Similar to me: Error parsing %1% config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected. -# 11 changes: Error parsing PrusaSlicer config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected. -# translation: Hiba a PrusaSlicer konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja meg manuálisan törölni a fájlt a hiba elhárításához. A felhasználói profilok nem lesznek érintettek. -# 57 changes: Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to manually delete the file to recover from the error. -# translation: Hiba a PrusaGCodeViewer konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja meg manuálisan törölni a fájlt a hiba elhárításához. -msgid "" -"Error parsing %1% config file, it is probably corrupted. Try to manually " -"delete the file to recover from the error. Your user profiles will not be " -"affected." +#: src/libslic3r/PrintConfig.cpp:1182 +msgid "mm/s for %-based speed" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3119 -#Similar to me: Exact last layer height -# 8 changes: First layer height -# translation: Első réteg magasság -# 8 changes: Initial layer height -# translation: Első réteg magasság -# 9 changes: Variable layer height -# translation: Változó rétegmagasság -msgid "Exact last layer height" +#: ../../ui_layout/default/print.ui +msgid "Modifying slices" msgstr "" -#: src/slic3r/GUI/ImGuiWrapper.cpp:1007 src/slic3r/GUI/Search.cpp:554 -#Similar to me: Exact pattern -# 5 changes: Fill pattern -# translation: Kitöltés mintázata -msgid "Exact pattern" +#: src/slic3r/GUI/MainFrame.cpp:1975 +msgid "Mosaic from picture" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:74 src/slic3r/GUI/PresetHints.cpp:114 -#: src/slic3r/GUI/PresetHints.cpp:131 +#: src/slic3r/GUI/GUI.cpp:350 #, possible-boost-format -msgid "except for the first %1% layers where the fan is disabled" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:76 src/slic3r/GUI/PresetHints.cpp:116 -#: src/slic3r/GUI/PresetHints.cpp:133 -msgid "except for the first layer where the fan is disabled" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3736 -msgid "" -"Experimental option to remove perimeters where there is nothing under them " -"and where a bridged infill should be better. \n" -" * Remove perimeters: remove the unsupported perimeters, leave the bridge " -"area as-is.\n" -" * Keep only bridges: remove the perimeters in the bridge areas, keep only " -"bridges that end in solid area.\n" -" * Keep bridges and overhangs: remove the unsupported perimeters, keep only " -"bridges that end in solid area, fill the rest with overhang perimeters" -"+bridges.\n" -" * Fill the voids with bridges: remove the unsupported perimeters, draw " -"bridges over the whole hole.* !! this one can escalate to problems with " -"overhangs shaped like /\\, so you should use it only on one layer at a time " -"via the height-range modifier!\n" -"!!Computationally intensive!!. " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1363 -msgid "" -"Experimental option which modifies (in solid infill) fill flow to have the " -"exact amount of plastic inside the volume to fill (it generally changes the " -"flow from -7% to +4%, depending on the size of the surface to fill and the " -"overlap parameters, but it can go as high as +50% for infill in very small " -"areas where rectilinear doesn't have good coverage). It has the advantage to " -"remove the over-extrusion seen in thin infill areas, from the overlap ratio" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1875 +#Similar to me: Most likely the configuration was produced by a newer version of %1% or PrusaSlicer. +# 19 changes: Most likely the configuration was produced by a newer version of +# translation: Valószínűleg a konfigurációt egy újabb verziója hozta létre a +# 24 changes: Most likely the configuration was produced by a newer version of PrusaSlicer or by some PrusaSlicer fork. +# translation: Valószínűleg a konfigurációt a PrusaSlicer újabb verziója vagy egyéb PrusaSlicer változat készítette. msgid "" -"Experimental setting. Fan speeds that are too high can clash with the " -"hotend's PID routine." +"Most likely the configuration was produced by a newer version of %1% or " +"PrusaSlicer." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1868 -msgid "" -"Experimental setting. May enable the hotend to cool down faster during " -"toolchanges" +#: ../../ui_layout/default/filament.ui +#Similar to me: Multimaterial +# 5 changes: SLA material +# translation: SLA anyag +# 5 changes: Material +# translation: Anyag +msgid "Multimaterial" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1861 -msgid "" -"Experimental: drops nozzle temperature during cooling moves instead of prior " -"to extraction to reduce wait time." +#: ../../ui_layout/default/filament.ui +msgid "Multimaterial toolchange string reduction" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:1762 -msgid "" -"Export current configuration to file, with only settings compatible with " -"PrusaSlicer" +#: ../../ui_layout/default/filament.ui +msgid "Multimaterial toolchange temperature" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:1762 -#Similar to me: Export to &Prusa Config -# 9 changes: Export &Config -# translation: Beállítások Exportálása -msgid "Export to &Prusa Config" +#: ../../ui_layout/default/print.ui +#Similar to me: Multiple extruders +# 1 changes: Multiple Extruders +# translation: Több Extruder +# 7 changes: Infill extruder +# translation: Kitöltő extruder +msgid "Multiple extruders" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1524 -msgid "ext peri first for inner side" +#: ../../ui_layout/default/extruder.ui +msgid "Name and Size" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1516 -msgid "Ext peri first for outer side" +#: ../../ui_layout/default/print.ui : l41 +#Similar to me: Not on first layer +# 5 changes: Solid first layer +# translation: Tömör első réteg +# 6 changes: Enforce on first layer +# translation: Kényszerítés az első rétegen +msgid "Not on first layer" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1431 -msgid "Ext. peri. cut corners" +#: src/libslic3r/PrintConfig.cpp:4221 +msgid "Not on top" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1456 -msgid "Ext. peri. overlap" +#: src/libslic3r/PrintConfig.cpp:910 +#Similar to me: Offset of brim from the printed object. Should be kept at 0 unless you encounter great difficulties to separate them.\nIt's subtracted to brim_width and brim_width_interior, so it has to be lower than them. The offset is applied after the first layer XY compensation (elephant foot). +# 108 changes: Distance between the brim and the part. Should be kept at 0 unless you encounter great difficulties to separate them. It's subtracted to brim_width and brim_width_interior, so it has to be lower than them +# translation: A perem és az alkatrész közötti távolság. 0-nak kell tartani, kivéve, ha nagy nehézségekbe ütközik a szétválasztásuk. A brim_width és a brim_width_interior értékekből levonásra kerül, ezért alacsonyabbnak kell lennie ezeknél +msgid "" +"Offset of brim from the printed object. Should be kept at 0 unless you " +"encounter great difficulties to separate them.\n" +"It's subtracted to brim_width and brim_width_interior, so it has to be lower " +"than them. The offset is applied after the first layer XY compensation " +"(elephant foot)." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1467 src/libslic3r/PrintConfig.cpp:1481 -#Similar to me: External -# 3 changes: Material -# translation: Anyag -msgid "External" +#: ../../ui_layout/default/extruder.ui +#Similar to me: Offsets (for multi-extruder printers) +# 7 changes: Position (for multi-extruder printers) +# translation: Pozíció (több extruderes nyomtatók esetében) +msgid "Offsets (for multi-extruder printers)" msgstr "" -#: ../../ui_layout/default/print.ui -#Similar to me: external perimeter -# 1 changes: External perimeter -# translation: Külső kerület -# 1 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor -# 2 changes: External perimeters -# translation: Külső kerületek -msgid "external perimeter" +#: ../../ui_layout/default/print.ui : l187 +msgid "On" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1468 -#Similar to me: External Perimeter acceleration -# 12 changes: External perimeters first -# translation: Külső kerületek először -msgid "External Perimeter acceleration" +#: ../../ui_layout/default/print.ui : l27 +#Similar to me: On first layer +# 4 changes: First layer +# translation: Első réteg +# 5 changes: Solid first layer +# translation: Tömör első réteg +msgid "On first layer" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1441 -#Similar to me: External perimeter fan speed -# 8 changes: External perimeters first -# translation: Külső kerületek először -# 9 changes: External perimeters -# translation: Külső kerületek -# 10 changes: External perimeter -# translation: Külső kerület -msgid "External perimeter fan speed" +#: ../../ui_layout/default/print.ui : l28 +#Similar to me: On top surfaces +# 3 changes: All top surfaces +# translation: Minden felső felület +# 4 changes: On surfaces +# translation: Felületeken +msgid "On top surfaces" msgstr "" #: ../../ui_layout/default/print.ui -#Similar to me: External perimeter first -# 1 changes: External perimeters first -# translation: Külső kerületek először -# 5 changes: External perimeters -# translation: Külső kerületek -# 6 changes: External perimeter -# translation: Külső kerület -msgid "External perimeter first" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1455 -#Similar to me: external perimeter overlap -# 8 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor -# 8 changes: External perimeters first -# translation: Külső kerületek először -# 9 changes: External perimeter -# translation: Külső kerület -msgid "external perimeter overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1504 -#Similar to me: External perimeters in vase mode -# 11 changes: External perimeters first -# translation: Külső kerületek először -# 11 changes: Extra perimeters if needed -# translation: Extra kerületek szükség esetén -msgid "External perimeters in vase mode" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1414 -#Similar to me: External perimeters spacing -# 7 changes: External perimeters first -# translation: Külső kerületek először -# 8 changes: External perimeters -# translation: Külső kerületek -# 9 changes: External perimeter -# translation: Külső kerület -msgid "External perimeters spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1482 -#Similar to me: External perimeters speed -# 5 changes: External perimeters first -# translation: Külső kerületek először -# 6 changes: External perimeters -# translation: Külső kerületek -# 7 changes: External perimeter -# translation: Külső kerület -msgid "External perimeters speed" +#Similar to me: One-loop perimeters +# 6 changes: Remove perimeters +# translation: Kerületek eltávolítása +# 7 changes: Overhang perimeter +# translation: Túlnyúlás kerülete +# 7 changes: Small perimeters +# translation: Kicsi kerületek +msgid "One-loop perimeters" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1396 -#Similar to me: External perimeters width -# 4 changes: External perimeters first -# translation: Külső kerületek először -# 6 changes: External perimeters -# translation: Külső kerületek -# 7 changes: External perimeter -# translation: Külső kerület -msgid "External perimeters width" +#: ../../ui_layout/default/printer_fff.ui : l38 +#Similar to me: Only for overhangs +# 6 changes: On overhangs +# translation: Túlnyúlásokon +# 7 changes: Only for outer side +# translation: Csak a külső oldalon +msgid "Only for overhangs" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1555 -msgid "Extra perimeter on odd layers" +#: src/libslic3r/PrintConfig.cpp:4222 +msgid "Only on top" msgstr "" #: ../../ui_layout/default/print.ui -#Similar to me: Extra perimeters -# 3 changes: External perimeters -# translation: Külső kerületek -# 4 changes: External perimeter -# translation: Külső kerület -# 4 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor -msgid "Extra perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1532 -#Similar to me: Extra perimeters (do nothing) -# 10 changes: Extra perimeters if needed -# translation: Extra kerületek szükség esetén -msgid "Extra perimeters (do nothing)" +#Similar to me: Only one perimeter +# 6 changes: Overhang perimeter +# translation: Túlnyúlás kerülete +# 7 changes: Internal perimeter +# translation: Belső kerület +# 7 changes: Remove perimeters +# translation: Kerületek eltávolítása +msgid "Only one perimeter" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1544 -#Similar to me: Extra perimeters over overhangs -# 12 changes: Extra perimeters if needed -# translation: Extra kerületek szükség esetén -msgid "Extra perimeters over overhangs" +#: src/slic3r/GUI/Plater.cpp:5959 +#Similar to me: Only selected objects +# 7 changes: Delete Selected Objects +# translation: Kijelölt tárgyak törlése +msgid "Only selected objects" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4331 -msgid "Extra skirt lines on the first layer." -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l46 -msgid "Extra unretraction" +#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:419 +#Similar to me: Open Client certificate file +# 5 changes: Open CA certificate file +# translation: CA tanúsítványfájl megnyitása +msgid "Open Client certificate file" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5655 -msgid "Extra Wipe for external perimeters" +#: src/slic3r/GUI/Plater.cpp:1116 +#Similar to me: Option tags: +# 4 changes: Options: +# translation: Opciók: +msgid "Option tags:" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4223 -#Similar to me: Extrat length on toolchange restart -# 12 changes: Extra length on restart -# translation: Extra hosszúság újraindításkor -msgid "Extrat length on toolchange restart" +#: src/slic3r/GUI/Plater.cpp:1128 +msgid "Option use another tags than the current mode." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:3717 -msgid "" -"Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " -"steep overhang.\n" -"!! this is a very slow algorithm (it uses the same results as " -"extra_perimeters_overhangs) !!" +#: ../../ui_layout/default/print.ui +#Similar to me: Options for support material interface +# 6 changes: Options for support material and raft +# translation: Támaszanyag és a tutaj lehetőségei +# 13 changes: Support material interface +# translation: Támasztóanyag interfész +msgid "Options for support material interface" msgstr "" #: ../../ui_layout/default/print.ui -#Similar to me: Extruder clearance (mm) -# 5 changes: Extruder clearance -# translation: Extruder körüli szabad tér -msgid "Extruder clearance (mm)" +msgid "Other extrusions acceleration" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1599 -#Similar to me: Extruder clearance height -# 7 changes: Extruder clearance -# translation: Extruder körüli szabad tér -msgid "Extruder clearance height" +#: ../../ui_layout/default/print.ui +#Similar to me: Other speed +# 4 changes: Wipe speed +# translation: Törlési sebesség +msgid "Other speed" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1613 -#Similar to me: Extruder clearance radius -# 7 changes: Extruder clearance -# translation: Extruder körüli szabad tér -msgid "Extruder clearance radius" +#: ../../ui_layout/default/printer_sla.ui +msgid "Output" msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2697 -msgid "Extruder decimals" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1658 -#Similar to me: Extruder fan offset -# 4 changes: Extruder offset -# translation: Extruder offset -msgid "Extruder fan offset" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2496 -#Similar to me: Extruder nozzle temperature for first layer. If you want to control temperature manually during print, set zero to disable temperature control commands in the output file. -# 27 changes: Nozzle temperature for the first layer. If you want to control temperature manually during print, set this to zero to disable temperature control commands in the output G-code. -# translation: Fúvóka hőmérséklete az első réteghez. Ha a hőmérsékletet manuálisan kívánja szabályozni a nyomtatás során, ha ezt nullára állítja, akkor a kimeneti G-kódban nem jelennek meg a hőmérsékletet szabályozási parancsok. -msgid "" -"Extruder nozzle temperature for first layer. If you want to control " -"temperature manually during print, set zero to disable temperature control " -"commands in the output file." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5093 -#Similar to me: Extruder nozzle temperature for layers after the first one. Set zero to disable temperature control commands in the output G-code. -# 18 changes: Nozzle temperature for layers after the first one. Set this to zero to disable temperature control commands in the output G-code. -# translation: A fúvóka hőmérséklete az első réteg után. Állítsa ezt nullára, hogy a kimeneti G-kódban a hőmérsékletet befolyásoló parancsokat letiltsa. -# 33 changes: Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output. -# translation: Tárgyasztal hőmérséklet az első réteg után. Ha ezt nullára állítja, akkor nem kerülnek a kimenetre a tárgyasztal hőmérsékletét szabályozó parancsok. -# 51 changes: Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output. -# translation: Fűtött tárgyasztal hőmérséklete az első réteghez. Ha ezt nullára állítja, akkor nem kerülnek a kimenetre a tárgyasztal hőmérsékletét szabályozó parancsok. -msgid "" -"Extruder nozzle temperature for layers after the first one. Set zero to " -"disable temperature control commands in the output G-code." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1958 -msgid "Extruder retraction calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1647 -#Similar to me: Extruder temp offset -# 5 changes: Extruder offset -# translation: Extruder offset -msgid "Extruder temp offset" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Extrusion direction -# 7 changes: Extrusion width -# translation: Extrudálási szélesség -# 7 changes: Extrusion Width -# translation: Extrudálási Szélesség -msgid "Extrusion direction" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3453 -msgid "Extrusion section (mm³/mm)" -msgstr "" - - -#: src/libslic3r/GCode.cpp:789 -msgid "Extrusion type change G-code" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/PresetHints.cpp:46 -msgid "Fan" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3178 -msgid "Fan KickStart time" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3464 -msgid "Fan PWM from 0-100" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Fan speed - default" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3159 -msgid "Fan startup delay" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:127 -#, possible-boost-format -msgid "fan will run by default to %1%%%" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1860 -msgid "Fast mode" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:247 -#Similar to me: Feature -# 2 changes: Texture -# translation: Textúra -msgid "Feature" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1759 -#Similar to me: Filament color -# 4 changes: Filament notes -# translation: Filament megjegyzések -# 5 changes: Filament type -# translation: Filament típus -# 5 changes: First color -# translation: Első szín -msgid "Filament color" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2136 -#Similar to me: Filament cost -# 4 changes: Filament notes -# translation: Filament megjegyzések -# 4 changes: Filament type -# translation: Filament típus -# 4 changes: Filaments -# translation: Filamentek -msgid "Filament cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1248 -#Similar to me: Filament end G-code -# 1 changes: Filament End G-code -# translation: Filament Vége G-kód -# 5 changes: Filament Start G-code -# translation: Filament Kezdete G-kód -msgid "Filament end G-code" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1954 -msgid "Filament Flow calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4612 -#Similar to me: Filament start G-code -# 1 changes: Filament Start G-code -# translation: Filament Kezdete G-kód -# 5 changes: Filament End G-code -# translation: Filament Vége G-kód -msgid "Filament start G-code" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1956 -msgid "Filament temperature calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2180 -#Similar to me: Fill -# 1 changes: File -# translation: Fájl -msgid "Fill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2181 -msgid "Fill angle increment" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1305 -msgid "" -"Fill pattern for bottom infill. This only affects the bottom visible layer, " -"and not its adjacent solid shells.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2234 -msgid "" -"Fill pattern for general low-density infill.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1333 -msgid "" -"Fill pattern for solid (internal) infill. This only affects the solid not-" -"visible layers. You should use rectilinear in most cases. You can try " -"ironing for translucent material. Rectilinear (filled) replaces zig-zag " -"patterns by a single big line & is more efficient for filling little " -"spaces.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1274 -msgid "" -"Fill pattern for top infill. This only affects the top visible layer, and " -"not its adjacent solid shells.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3753 -msgid "Fill the voids with bridges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1531 -msgid "filling horizontal gaps on slopes" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Filtering -# 3 changes: Filter -# translation: Szűrő -msgid "Filtering" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: first layer -# 1 changes: First layer -# translation: Első réteg -# 4 changes: First page -# translation: Következő oldal -msgid "first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2355 -#Similar to me: First layer acceleration -# 8 changes: First layer expansion -# translation: Első réteg túlnyúlása -msgid "First layer acceleration" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBedDialog.cpp:37 -#Similar to me: First layer calibration -# 8 changes: First layer expansion -# translation: Első réteg túlnyúlása -# 9 changes: First layer height -# translation: Első réteg magasság -# 9 changes: First layer volumetric -# translation: Az első réteg volumetrikus -msgid "First layer calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1582 -#Similar to me: First layer extruder -# 7 changes: First layer expansion -# translation: Első réteg túlnyúlása -# 7 changes: First layer speed -# translation: Sebesség az első rétegnél -# 8 changes: First layer density -# translation: Első réteg sűrűsége -msgid "First layer extruder" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2292 -#Similar to me: First layer flow ratio -# 8 changes: First layer volumetric -# translation: Az első réteg volumetrikus -msgid "First layer flow ratio" -msgstr "" - - -#: src/libslic3r/Print.cpp:848 -#, possible-c-format, possible-boost-format -#Similar to me: First layer height can't be greater than %s -# 15 changes: First layer height can't be greater than nozzle diameter -# translation: Az első réteg magassága nem lehet nagyobb, mint a fúvóka átmérője -msgid "First layer height can't be greater than %s" -msgstr "" - - -#: src/libslic3r/Print.cpp:835 -#, possible-c-format, possible-boost-format -msgid "First layer height can't be lower than %s" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2413 -#Similar to me: First layer spacing -# 5 changes: First layer speed -# translation: Sebesség az első rétegnél -# 6 changes: First layer density -# translation: Első réteg sűrűsége -# 6 changes: First layer expansion -# translation: Első réteg túlnyúlása -msgid "First layer spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2393 -#Similar to me: First layer width -# 5 changes: First layer height -# translation: Első réteg magasság -# 5 changes: First layer speed -# translation: Sebesség az első rétegnél -# 6 changes: Display width -# translation: Kijelző szélesség -msgid "First layer width" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:3026 -#Similar to me: Flat time compensation -# 7 changes: XY Size Compensation -# translation: XY méret kompenzáció -msgid "Flat time compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6181 -msgid "Flexible" -msgstr "" - - -#: src/slic3r/GUI/CalibrationFlowDialog.cpp:42 -msgid "Flow calibration" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Flow ratio -# 2 changes: Flow rate -# translation: Áramlási sebesség -msgid "Flow ratio" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:763 -msgid "" -"Flow ratio to compensate for the gaps in a bridged top surface. Used for " -"ironing infillpattern to prevent regions where the low-flow pass does not " -"provide a smooth surface due to a lack of plastic. You can increase it " -"slightly to pull the top layer at the correct height. Recommended maximum: " -"120%." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:563 -msgid "Focusing platter on mouse over" -msgstr "" - - -#: src/slic3r/GUI/UpdateDialogs.cpp:282 -#Similar to me: For more information please visit Prusa wiki page: -# 4 changes: For more information please visit our wiki page: -# translation: További információkért kérjük, látogasson el a wiki oldalunkra: -msgid "For more information please visit Prusa wiki page:" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1937 -msgid "" -"For stock extruders, usually 40-42mm. For bondtech extruder upgrade, " -"usually 30-32mm. Start with a low value and gradually increase it until " -"strings are gone. If there are blobs on your wipe tower, your value is too " -"high." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:405 -#Similar to me: Format of G-code thumbnails -# 10 changes: G-code thumbnails -# translation: G-kód miniatűrök -msgid "Format of G-code thumbnails" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:406 -msgid "" -"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:477 -msgid "FreeCAD path" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1975 -msgid "FreeCad python script" -msgstr "" - - -#: src/slic3r/GUI/FreeCADDialog.cpp:138 -msgid "FreePySCAD : script engine for FreeCAD" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4346 -#Similar to me: from brim -# 3 changes: No brim -# translation: Nincs karima -msgid "from brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4800 -#Similar to me: From filament -# 4 changes: Used filament -# translation: Felhasznált filament -# 5 changes: filament -# translation: filament -# 5 changes: Filament -# translation: Filament -msgid "From filament" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4801 -msgid "From plane" -msgstr "" - -#: ../../ui_layout/default/milling.ui -#Similar to me: G-Code -# 1 changes: G-code -# translation: G-kód -msgid "G-Code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5959 -msgid "G-Code to switch from this toolhead" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5945 -msgid "G-Code to switch to this toolhead" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Gap Fill -# 1 changes: Gap fill -# translation: Hézag kitöltés -msgid "Gap Fill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2566 -#Similar to me: Gap fill acceleration -# 8 changes: Maximum accelerations -# translation: Maximum gyorsulások -msgid "Gap fill acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2597 src/libslic3r/PrintConfig.cpp:2598 -msgid "Gap fill overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2611 -msgid "Gap fill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2580 -msgid "Gapfill after last perimeter" -msgstr "" - - -#: src/libslic3r/GCode.cpp:931 -msgid "Gcode done" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1879 -msgid "GCode Pre&view Tab" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Gcode precision -# 6 changes: G-code preview -# translation: G-kód előnézet -msgid "Gcode precision" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:362 src/slic3r/GUI/MainFrame.cpp:466 -#: src/slic3r/GUI/MainFrame.cpp:673 src/slic3r/GUI/MainFrame.cpp:716 -#Similar to me: Gcode preview -# 1 changes: G-code preview -# translation: G-kód előnézet -# 3 changes: &G-code Preview -# translation: G-Kód Előnézet -msgid "Gcode preview" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "General wipe" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBedDialog.cpp:29 -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:73 -#: src/slic3r/GUI/CalibrationTempDialog.cpp:52 -#: src/slic3r/GUI/FreeCADDialog.cpp:261 -#Similar to me: Generate -# 2 changes: General -# translation: Általános -# 3 changes: Generic -# translation: Általános -msgid "Generate" -msgstr "" - - -#: src/slic3r/GUI/CalibrationFlowDialog.cpp:30 -#, possible-c-format, possible-boost-format -msgid "Generate 10% intervals around current value" -msgstr "" - - -#: src/slic3r/GUI/CalibrationFlowDialog.cpp:33 -#, possible-c-format, possible-boost-format -msgid "Generate 2% intervals below current value" -msgstr "" - - -#: src/libslic3r/Print.cpp:1132 -#Similar to me: Generating brim -# 4 changes: Generating pad -# translation: Alátét generálása -# 6 changes: Generating G-code -# translation: G-kód generálása -msgid "Generating brim" -msgstr "" - - -#: src/libslic3r/GCode.cpp:3261 -#, possible-c-format, possible-boost-format -msgid "Generating G-code layer %s / %s" -msgstr "" - - -#: src/libslic3r/PrintObject.cpp:369 -#, possible-c-format, possible-boost-format -msgid "Generating perimeters: layer %s / %s" -msgstr "" - - -#: src/libslic3r/Print.cpp:1075 -#Similar to me: Generating skirt -# 5 changes: Generating pad -# translation: Alátét generálása -# 6 changes: Generating G-code -# translation: G-kód generálása -msgid "Generating skirt" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2795 src/libslic3r/PrintConfig.cpp:2813 -#: src/libslic3r/PrintConfig.cpp:2831 src/libslic3r/PrintConfig.cpp:2849 -msgid "" -"Give to the infill algorithm if the infill needs to be connected, and on " -"which perimeters Can be useful for art or with high infill/perimeter " -"overlap. The result may vary between infill types." -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:43 -msgid "Goal:" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4744 -msgid "" -"Grey values means that they can't be send to your firmware (no g-code " -"available)." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:766 -msgid "Gui Colors" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6184 -msgid "Heat-resistant" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2382 -#Similar to me: Heated build plate temperature for the first layer. Set zero to disable bed temperature control commands in the output. -# 8 changes: Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output. -# translation: Fűtött tárgyasztal hőmérséklete az első réteghez. Ha ezt nullára állítja, akkor nem kerülnek a kimenetre a tárgyasztal hőmérsékletét szabályozó parancsok. -# 38 changes: Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output. -# translation: Tárgyasztal hőmérséklet az első réteg után. Ha ezt nullára állítja, akkor nem kerülnek a kimenetre a tárgyasztal hőmérsékletét szabályozó parancsok. -msgid "" -"Heated build plate temperature for the first layer. Set zero to disable bed " -"temperature control commands in the output." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2313 -msgid "height in layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4356 -msgid "" -"Height of skirt expressed in layers. Set this to a tall value to use skirt " -"as a shield against drafts." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2243 -msgid "Help / Details:" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3548 -#Similar to me: Here you can put your personal notes. This text will be added to the G-code header comments. -# 11 changes: You can put here your personal notes. This text will be added to the G-code header comments. -# translation: Itt elhelyezheti személyes jegyzeteit. Ez a szöveg hozzá lesz fűzve a G-kód fejlécének megjegyzéseihez. -msgid "" -"Here you can put your personal notes. This text will be added to the G-code " -"header comments." -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui : l15 -msgid "horizontal" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:832 -#Similar to me: Horizontal width of the brim that will be printed around each object on the first layer.\nWhen raft is used, no brim is generated (use raft_first_layer_expansion). -# 7 changes: The horizontal width of the brim that will be printed around each object on the first layer. When raft is used, no brim is generated (use raft_first_layer_expansion). -# translation: A karima vízszintes szélessége, amely az első réteg minden egyes objektuma köré nyomtatásra kerül. Tutaj használatakor a rendszer nem generál karimát. (használja a raft_first_layer_expansion-t). -msgid "" -"Horizontal width of the brim that will be printed around each object on the " -"first layer.\n" -"When raft is used, no brim is generated (use raft_first_layer_expansion)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:842 -#Similar to me: Horizontal width of the brim that will be printed inside each object on the first layer. -# 22 changes: This flag enables the brim that will be printed around each object on the first layer. -# translation: Ez a jelölő engedélyezi a karimát, amely az első réteg minden objektuma köré kerül nyomtatásra. -# 27 changes: The places where the brim will be printed around each object on the first layer. -# translation: Azok a helyek, ahol a karima az első réteg minden egyes objektuma köré kinyomtatásra kerül. -msgid "" -"Horizontal width of the brim that will be printed inside each object on the " -"first layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4366 -msgid "" -"Horizontal width of the skirt that will be printed around each object. If " -"left as zero, first layer extrusion width will be used if set and the skirt " -"is only 1 layer height, or perimeter extrusion width will be used (using the " -"computed value if not set)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6511 -msgid "" -"How much the supports should lift up the supported object. If this value is " -"zero, the bottom of the model geometry will be considered as part of the pad." -"If \"Pad around object\" is enabled, this value is ignored." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3204 -msgid "" -"How to apply the Machine Limits.\n" -"* In every case, they will be used as safeguards: Even if you use a print " -"profile that sets an acceleration of 5000, if in your machine limits the " -"acceleration is 4000, the outputted gcode will use the 4000 limit.\n" -"* You can also use it as a safeguard and to have a better printing time " -"estimate.\n" -"* You can also use it as a safeguard, to have a better printing time " -"estimate and emit the limits at the begining of the gcode file, with M201 " -"M202 M203 M204 and M205 commands. If you want only to write a sub-set, " -"choose the 'for time estimate' option and write your own gcodes in the " -"custom gcode section." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4792 -msgid "" -"How to compute the vertical z-distance.\n" -"From filament: it uses the nearest bit of the filament. When a bridge is " -"extruded, it goes below the current plane.\n" -"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is " -"extruded.\n" -"None: No z-offset. Useful for Soluble supports.\n" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1977 -msgid "How to use the FreeCad python script window." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1948 -msgid "How to use this menu and calibrations." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5590 -msgid "Hyperbola" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:426 -msgid "Icon" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:494 -msgid "" -"Ideally, the spacing between two extrusions shouldn't be lower than the " -"nozzle diameter. Below are the extrusion widths for a spacing equal to the " -"nozzle diameter.\n" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "idx" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3501 -#, possible-c-format, possible-boost-format -msgid "" -"If a top surface has to be printed and it's partially covered by another " -"layer, it won't be considered at a top layer where its width is below this " -"value. This can be useful to not let the 'one perimeter on top' trigger on " -"surface that should be covered only by perimeters. This value can be a mm or " -"a % of the perimeter extrusion width." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5975 -msgid "" -"If activated, at the end of each layer, the printer will switch to a milling " -"head and mill the external perimeters.\n" -"You should set the 'Milling extra XY size' to a value high enough to have " -"enough plastic to mill. Also, be sure that your piece is firmly glued to the " -"bed." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:565 -msgid "" -"If disabled, moving the mouse over the platter panel will not change the " -"focus but some shortcuts from the platter may not work. If enabled, moving " -"the mouse over the platter panel will move focus there, and away from the " -"current control." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:385 -#, possible-boost-format -#Similar to me: If enabled, sets %1% as default application to open .gcode files. -# 16 changes: If enabled, sets PrusaSlicer as default application to open .3mf files. -# translation: Ha engedélyezve van, a PrusaSlicert alapértelmezett alkalmazásként állítja be a .3mf fájlok megnyitásához. -# 16 changes: If enabled, sets PrusaSlicer as default application to open .stl files. -# translation: Ha engedélyezve van, a PrusaSlicert alapértelmezett alkalmazásként állítja be a .stl fájlok megnyitásához. -# 25 changes: If enabled, sets PrusaSlicer G-code Viewer as default application to open .gcode files. -# translation: Ha engedélyezve van, beállítja a PrusaSlicer G-code Viewer-t alapértelmezett alkalmazásként a .gcode fájlok megnyitásához. -msgid "If enabled, sets %1% as default application to open .gcode files." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:282 -#Similar to me: If enabled, sets Slic3r as default application to open .3mf files. -# 6 changes: If enabled, sets PrusaSlicer as default application to open .3mf files. -# translation: Ha engedélyezve van, a PrusaSlicert alapértelmezett alkalmazásként állítja be a .3mf fájlok megnyitásához. -# 9 changes: If enabled, sets PrusaSlicer as default application to open .stl files. -# translation: Ha engedélyezve van, a PrusaSlicert alapértelmezett alkalmazásként állítja be a .stl fájlok megnyitásához. -# 25 changes: If enabled, sets PrusaSlicer G-code Viewer as default application to open .gcode files. -# translation: Ha engedélyezve van, beállítja a PrusaSlicer G-code Viewer-t alapértelmezett alkalmazásként a .gcode fájlok megnyitásához. -msgid "If enabled, sets Slic3r as default application to open .3mf files." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:289 -#Similar to me: If enabled, sets Slic3r as default application to open .stl files. -# 6 changes: If enabled, sets PrusaSlicer as default application to open .stl files. -# translation: Ha engedélyezve van, a PrusaSlicert alapértelmezett alkalmazásként állítja be a .stl fájlok megnyitásához. -# 9 changes: If enabled, sets PrusaSlicer as default application to open .3mf files. -# translation: Ha engedélyezve van, a PrusaSlicert alapértelmezett alkalmazásként állítja be a .3mf fájlok megnyitásához. -# 25 changes: If enabled, sets PrusaSlicer G-code Viewer as default application to open .gcode files. -# translation: Ha engedélyezve van, beállítja a PrusaSlicer G-code Viewer-t alapértelmezett alkalmazásként a .gcode fájlok megnyitásához. -msgid "If enabled, sets Slic3r as default application to open .stl files." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:8442 -#Similar to me: If enabled, the command line arguments are sent to an existing instance of GUI Slic3r, or an existing Slic3r window is activated. Overrides the \"single_instance\" configuration value from application preferences. -# 12 changes: If enabled, the command line arguments are sent to an existing instance of GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides the \"single_instance\" configuration value from application preferences. -# translation: Ha engedélyezve van, a parancssori argumentumokat a egy meglévő PrusaSlicer GUI példánynak küldi el, vagy egy meglévő PrusaSlicer ablakot aktivál. Az alkalmazás beállításai közül felülírja a \"single_instance\" konfigurációs értéket. -msgid "" -"If enabled, the command line arguments are sent to an existing instance of " -"GUI Slic3r, or an existing Slic3r window is activated. Overrides the " -"\"single_instance\" configuration value from application preferences." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:262 -msgid "" -"If enabled, the gui will be in expert mode even if the simple or advanced " -"mode is selected (but not the setting tabs)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2471 -#, possible-c-format, possible-boost-format -msgid "" -"If expressed as absolute value in mm/s, this speed will be applied as a " -"maximum for all infill print moves of the first layer.\n" -"If expressed as a percentage it will scale the current infill speed.\n" -"Set it at 100% to remove any infill first layer speed modification.\n" -"Set zero to disable (using first_layer_speed instead)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2445 -#, possible-c-format, possible-boost-format -msgid "" -"If expressed as absolute value in mm/s, this speed will be applied as a " -"maximum to all the print moves (but infill) of the first layer.\n" -"If expressed as a percentage it will scale the current speed.\n" -"Set it at 100% to remove any first layer speed modification (but for infill)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2457 -#Similar to me: If expressed as absolute value in mm/s, this speed will be usedf as a max over all the print moves of the first object layer above raft interface, regardless of their type.\nIf expressed as a percentage it will scale the current speed (max 100%).\nSet it at 100% to remove this speed modification. -# 92 changes: If expressed as absolute value in mm/s, this speed will be applied to all the print moves of the first object layer above raft interface, regardless of their type. If expressed as a percentage (for example: 40%) it will scale the default speeds. -# translation: Ha abszolút értékként van megadva mm/s-ban, akkor ez a sebesség a tutajfelület feletti első objektumréteg összes nyomtatási feladatára vonatkozik, függetlenül azok típusától. Ha százalékban van megadva (például: 40%), akkor az alapértelmezett sebességeket skálázza. -msgid "" -"If expressed as absolute value in mm/s, this speed will be usedf as a max " -"over all the print moves of the first object layer above raft interface, " -"regardless of their type.\n" -"If expressed as a percentage it will scale the current speed (max 100%).\n" -"Set it at 100% to remove this speed modification." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:479 -msgid "" -"If it point to a valid freecad instance (the bin directory or the python " -"executable), you can use the built-in python script to quickly generate " -"geometry." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1747 -#Similar to me: If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the default and maximum speeds.\nSet zero to disable. -# 29 changes: If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the minimum and maximum speeds. -# translation: Ha a rétegnyomtatási idő becsült értéke ennyi másodpercnél kevesebb, akkor a ventilátor bekapcsol, és a sebessége a minimális és maximális sebesség interpolálásával kerül meghatározásra. -msgid "" -"If layer print time is estimated below this number of seconds, fan will be " -"enabled and its speed will be calculated by interpolating the default and " -"maximum speeds.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4406 -#Similar to me: If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value, if possible.\nSet zero to disable. -# 35 changes: If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value. -# translation: Ha a rétegnyomtatás becsült ideje kevesebb, mint ennyi másodperc, akkor a nyomtatási mozgások sebessége lecsökken, hogy az időtartamot erre az értékre növelje. -msgid "" -"If layer print time is estimated below this number of seconds, print moves " -"speed will be scaled down to extend duration to this value, if possible.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5398 -msgid "" -"If selected, the deceleration of a travel will use the acceleration value of " -"the extrusion that will be printed after it (if any) " -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2263 -msgid "" -"If the perimeter overlap is set at 100%, the yellow areas should be filled " -"by the overlap.\n" -"If overlap is at 0%, width = spacing." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1738 -msgid "" -"If this is enabled, fan will continuously run at base speed if no other " -"setting overrides that speed. Useful for PLA, harmful for ABS." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:315 -msgid "" -"If this is enabled, Slic3r will prompt for when overwriting files from save " -"dialogs." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:328 -#Similar to me: If this is enabled, when starting Slic3r and another instance of the same Slic3r is already running, that instance will be reactivated instead. -# 12 changes: If this is enabled, when starting PrusaSlicer and another instance of the same PrusaSlicer is already running, that instance will be reactivated instead. -# translation: Ha ez engedélyezve van és a PrusaSlicer indításakor ugyanannak a PrusaSlicernek egy másik példánya már fut, akkor az a példány lesz újra aktiválva. -msgid "" -"If this is enabled, when starting Slic3r and another instance of the same " -"Slic3r is already running, that instance will be reactivated instead." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3629 -msgid "" -"If you have some problem with the 'Only one perimeter on Top surfaces' " -"option, you can try to activate this on the problematic layer." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:793 -#, possible-c-format, possible-boost-format -msgid "" -"If you use a color with higher than 80% saturation and/or value, these will " -"be increased. If lower, they will be decreased." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3347 -msgid "" -"If your firmware stops while printing, it may have its gcode queue full. Set " -"this parameter to merge extrusions into bigger ones to reduce the number of " -"gcode commands the printer has to process each second.\n" -"On 8bit controlers, a value of 150 is typical.\n" -"Note that reducing your printing speed (at least for the external " -"extrusions) will reduce the number of time this will triggger and so " -"increase quality.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2633 -msgid "Illegal characters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2634 -msgid "Illegal characters for filename" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1709 -#Similar to me: Import Prusa Config -# 6 changes: Import &Config -# translation: Konfiguráció Importálása -msgid "Import Prusa Config" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1719 -#Similar to me: Import Prusa Config Bundle -# 7 changes: Import Config &Bundle -# translation: Konfigurációs Csomag Importálása -# 9 changes: Export Config &Bundle -# translation: Konfigurációs Csomag Exportálása -msgid "Import Prusa Config Bundle" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:83 -#Similar to me: Import STL/OBJ/AMF/3MF without config, keep platter -# 1 changes: Import STL/OBJ/AMF/3MF without config, keep plater -# translation: STL/OBJ/AMF/3MF Importálása konfiguráció nélkül, a tárgyasztal megtartásával -# 17 changes: Open project STL/OBJ/AMF/3MF with config, clear plater -# translation: STL/OBJ/AMF/3MF projekt megnyitása konfigurációval, üres tárgyasztal -msgid "Import STL/OBJ/AMF/3MF without config, keep platter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4700 -msgid "" -"In sloping areas, when you have a number of top / bottom solid layers and " -"few perimeters, it may be necessary to put some solid infill above/below " -"the perimeters to fulfill the top/bottom layers criteria.\n" -"By setting this to something higher than 0, you can control this behaviour, " -"which might be desirable if \n" -"undesirable solid infill is being generated on slopes.\n" -"The number set here indicates the number of layers between the inside of the " -"part and the air at and beyond which solid infill should no longer be added " -"above/below. If this setting is equal or higher than the top/bottom solid " -"layer count, it won't do anything. If this setting is set to 1, it will " -"evict all solid fill above/below perimeters. \n" -"Set zero to disable.\n" -"!! ensure_vertical_shell_thickness needs to be activated so this algorithm " -"can work !!." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1503 -msgid "In vase mode (no seam)" -msgstr "" - -#: ../../ui_layout/default/print.ui : l171 -msgid "increment" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2720 -#Similar to me: Infill acceleration -# 7 changes: Maximum accelerations -# translation: Maximum gyorsulások -msgid "Infill acceleration" -msgstr "" - -#: ../../ui_layout/default/filament.ui : l35 -#Similar to me: Infill bridges -# 5 changes: Thick bridges -# translation: Vastag hidak -msgid "Infill bridges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:706 -#Similar to me: Infill bridges fan speed -# 8 changes: Bridges fan speed -# translation: Híd ventilátor sebesség -msgid "Infill bridges fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2469 -msgid "Infill max first layer speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2923 -msgid "Infill spacing" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Infill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2904 -msgid "Infill width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2954 -#Similar to me: Infill/perimeters encroachment -# 10 changes: Infill/perimeters overlap -# translation: Kitöltés/kerület átfedés -msgid "Infill/perimeters encroachment" -msgstr "" - - -#: src/libslic3r/PrintObject.cpp:553 src/libslic3r/PrintObject.cpp:574 -#, possible-c-format, possible-boost-format -#Similar to me: Infilling layer %s / %s -# 7 changes: Infilling layers -# translation: Kitöltő rétegek -msgid "Infilling layer %s / %s" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5684 -#Similar to me: Inner -# 2 changes: Enter -# translation: Nyomtató -# 2 changes: Index -# translation: Tartalom mutató -# 2 changes: Insert -# translation: Bekezdés -msgid "Inner" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5685 -#Similar to me: Inner XY size compensation -# 8 changes: XY Size Compensation -# translation: XY méret kompenzáció -msgid "Inner XY size compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1936 -msgid "Insertion distance" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4744 src/libslic3r/PrintConfig.cpp:4969 -msgid "Interface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:840 -msgid "Interior Brim width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3776 src/libslic3r/PrintConfig.cpp:3899 -#Similar to me: Internal -# 3 changes: Material -# translation: Anyag -msgid "Internal" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:284 src/libslic3r/ExtrusionEntity.cpp:286 -#: src/libslic3r/ExtrusionEntity.cpp:321 -#Similar to me: Internal bridge infill -# 7 changes: Internal infill -# translation: Belső kitöltés -msgid "Internal bridge infill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:812 -msgid "Internal bridge speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:811 -msgid "Internal bridges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:667 -msgid "Internal bridges " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:668 -msgid "Internal bridges acceleration" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/ExtrusionEntity.cpp:278 -#: src/libslic3r/ExtrusionEntity.cpp:305 -#Similar to me: Internal perimeter -# 2 changes: External perimeter -# translation: Külső kerület -# 3 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor -# 3 changes: External perimeters -# translation: Külső kerületek -msgid "Internal perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3777 -msgid "Internal Perimeter acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3900 -#Similar to me: Internal perimeters speed -# 7 changes: External perimeters first -# translation: Külső kerületek először -# 8 changes: external perimeters -# translation: külső kerületek _ nyomtatásakor -# 8 changes: External perimeters -# translation: Külső kerületek -msgid "Internal perimeters speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3892 -msgid "" -"Internal perimeters will go around sharp corners by turning around instead " -"of making the same sharp corner. This can help when there are visible holes " -"in sharp corners on perimeters. It also help to print the letters on the " -"benchy stern.\n" -"Can incur some more processing time, and corners are a bit less sharp." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4078 -msgid "Internal resolution" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1948 -msgid "Introduction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3022 -#Similar to me: Ironing acceleration -# 8 changes: Maximum accelerations -# translation: Maximum gyorsulások -msgid "Ironing acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3035 -#Similar to me: Ironing angle -# 4 changes: Bridging angle -# translation: Hídkészítési szög -# 4 changes: Ironing Type -# translation: Vasalás típusa -msgid "Ironing angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3037 -msgid "Ironing angle. if negative, it will use the fill angle." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2342 -msgid "Ironing flow distribution" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Ironing infill pattern tuning" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1963 -msgid "Ironing pattern calibration" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Ironing post-process (This will go on top of infills and perimeters)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3079 -#Similar to me: Ironing speed -# 4 changes: Ironing Type -# translation: Vasalás típusa -# 4 changes: Loading speed -# translation: Betöltési sebesség -# 4 changes: Print speed -# translation: Nyomtatási sebesség -msgid "Ironing speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3081 -msgid "" -"Ironing speed. Used for the ironing pass of the ironing infill pattern, and " -"the post-process infill.\n" -"This can be expressed as a percentage (for example: 80%) over the Top Solid " -"Infill speed.\n" -"Ironing extrusions are ignored from the automatic volumetric speed " -"computation." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2327 -#Similar to me: Ironing width -# 5 changes: Brim width -# translation: Karima szélesség -# 5 changes: Ironing Type -# translation: Vasalás típusa -msgid "Ironing width" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:807 -msgid "" -"It can be a good idea to use a bit darker color, as some hues can be a bit " -"difficult to read." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:779 -msgid "" -"It may need a lighter color, as it's used to replace white on top of a dark " -"background." -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:224 -msgid "" -"It's not possible to use a bigger value for the brim offset than the brim " -"width, as it won't extrude anything. Brim offset have to be lower than the " -"brim width." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3857 -msgid "" -"Join the perimeters to create only one continuous extrusion without any z-" -"hop. Long inside travel (from external to holes) are not extruded to give " -"some space to the infill." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3752 -msgid "Keep bridges and overhangs" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:736 -msgid "Keep current flow" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3751 -msgid "Keep only bridges" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui : l40 -msgid "Kickstart duration" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Layer count" -msgstr "" - - -#: src/libslic3r/Print.cpp:867 -#, possible-c-format, possible-boost-format -msgid "Layer height can't be greater than %s" -msgstr "" - - -#: src/libslic3r/Print.cpp:854 -#, possible-c-format, possible-boost-format -msgid "Layer height can't be lower than %s" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1876 -msgid "Layer previe&w Tab" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3449 -#Similar to me: Layer Time -# 4 changes: Paper size -# translation: Papír méret -msgid "Layer Time" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:253 -#Similar to me: Layer time -# 4 changes: Paper size -# translation: Papír méret -msgid "Layer time" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3450 -msgid "Layer Time (log)" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:254 -msgid "Layer time (log)" -msgstr "" - -#: ../../ui_layout/default/filament.ui : l48 -msgid "Layer time goal" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1087 src/slic3r/GUI/Preferences.cpp:1105 -msgid "Layout with the tab bar" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1088 src/slic3r/GUI/Preferences.cpp:1106 -msgid "Legacy layout" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1180 -msgid "Legend" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4196 -msgid "Lift only on" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "Lift z enforcement" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2925 -msgid "" -"Like First layer width but spacing is the distance between two lines (as " -"they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2415 -msgid "" -"Like First layer width but spacing is the distance between two lines (as " -"they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3839 -msgid "" -"Like Perimeter width but spacing is the distance between two perimeter lines " -"(as they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4519 -msgid "" -"Like Solid infill width but spacing is the distance between two lines (as " -"they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1416 -msgid "" -"Like the External perimeters width, but this value is the distance between " -"the edge and the 'frontier' to the next perimeter.\n" -"Setting the spacing will deactivate the width setting, and vice versa.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5315 -msgid "" -"Like Top solid infill width but spacing is the distance between two lines " -"(as they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5588 -#Similar to me: Linear -# 2 changes: Line -# translation: Vonal -msgid "Linear" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4332 -#Similar to me: lines -# 2 changes: Files -# translation: Fájlok -# 2 changes: Line -# translation: Vonal -# 2 changes: files -# translation: Fájlok -msgid "lines" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1709 -msgid "Load configuration file exported from PrusaSlicer" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1719 -#Similar to me: Load presets from a PrusaSlicer bundle -# 12 changes: Load presets from a bundle -# translation: Előbeállítások betöltése konfigurációs csomagból -msgid "Load presets from a PrusaSlicer bundle" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4913 -#Similar to me: LOCKED LOCK icon indicates that the values this widget control are all the same as the system (or default) values. -# 27 changes: LOCKED LOCK icon indicates that the value is the same as the system (or default) value. -# translation: ZÁRT LAKAT ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy alapértelmezett) értékével. -msgid "" -"LOCKED LOCK icon indicates that the values this widget control are all the " -"same as the system (or default) values." -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:254 -msgid "Log time" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1053 -msgid "lowest Y" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1054 -msgid "lowest Z" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3146 -msgid "M117" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3147 -msgid "M73" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3148 -msgid "M73 & M117" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3136 -#Similar to me: M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode.\nM117: Send a command to display a message to the printer, this is 'Time Left .h..m..s'. -# 98 changes: Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode. -# translation: Küldje az M73 P[nyomtatott százalék] R[hátralévő idő percben] értéket 1 perces időközönként a G-kódba, hogy a firmware pontosan mutassa a hátralévő időt. Jelenleg csak a Prusa i3 MK3 firmware ismeri fel az M73-at. Az i3 MK3 firmware is támogatja az M73 Qxx Sxx Sxx-t a csendes módban. -msgid "" -"M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute " -"intervals into the G-code to let the firmware show accurate remaining time. " -"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " -"firmware supports M73 Qxx Sxx for the silent mode.\n" -"M117: Send a command to display a message to the printer, this is 'Time " -"Left .h..m..s'." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:3032 -#Similar to me: Machine Limits -# 1 changes: Machine limits -# translation: Gépi limitek -msgid "Machine Limits" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4757 -msgid "Machine limits are disabled. They are not used for anything." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4753 -msgid "Machine limits are used as safegard when generating gcode" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4740 -msgid "" -"Machine limits will be emitted to G-code and used to estimate print time. " -"They are also used as safegard when generating gcode" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4747 -#Similar to me: Machine limits will NOT be emitted to G-code, however they will be used to estimate print time, which may therefore not be accurate as the printer may apply a different set of machine limits. They are also used as safegard when generating gcode -# 53 changes: Machine limits will NOT be emitted to G-code, however they will be used to estimate print time, which may therefore not be accurate as the printer may apply a different set of machine limits. -# translation: A gépi korlátok NEM kerülnek a G-kódba, a nyomtatási idő becslésénél viszont felhasználásra kerülnek. A nyomtató más gépi korlátokat alkalmazhat, ezért a nyomtatási idő becslése pontatlan lehet. -msgid "" -"Machine limits will NOT be emitted to G-code, however they will be used to " -"estimate print time, which may therefore not be accurate as the printer may " -"apply a different set of machine limits. They are also used as safegard when " -"generating gcode" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:792 -msgid "Main color template." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:260 -msgid "Main GUI always in expert mode" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:790 -msgid "Main Gui color template" -msgstr "" - - -#: src/slic3r/GUI/AboutDialog.cpp:278 -msgid "Manual by Gary Hodgson. Inspired by the RepRap community." -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1179 -msgid "Marker" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6732 -msgid "Masked CWS" -msgstr "" - -#: ../../ui_layout/default/sla_material.ui -msgid "material_correction" -msgstr "" - - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 -#, possible-c-format, possible-boost-format -msgid "max %s version" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:857 -msgid "Max angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:786 -#Similar to me: Max bridge density -# 4 changes: Max bridge length -# translation: Híd max. hossza -msgid "Max bridge density" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3358 -#Similar to me: Max fan speed -# 4 changes: Max print speed -# translation: Max nyomtatási sebesség -# 5 changes: Fan speed -# translation: Ventilátor sebesség -msgid "Max fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2468 -#Similar to me: Max infill -# 4 changes: Gap fill -# translation: Hézag kitöltés -# 4 changes: infill -# translation: kitöltés _ nyomtatásakor -msgid "Max infill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3370 -#Similar to me: Max layer height -# 5 changes: First layer height -# translation: Első réteg magasság -# 5 changes: Layer height -# translation: Réteg magasság -# 5 changes: Max print height -# translation: Max nyomtatási magasság -msgid "Max layer height" -msgstr "" - - -#: src/libslic3r/Print.cpp:824 -#Similar to me: Max layer height can't be greater than nozzle diameter -# 5 changes: First layer height can't be greater than nozzle diameter -# translation: Az első réteg magassága nem lehet nagyobb, mint a fúvóka átmérője -# 5 changes: Layer height can't be greater than nozzle diameter -# translation: A réteg magassága nem lehet nagyobb, mint a fúvóka átmérője -msgid "Max layer height can't be greater than nozzle diameter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4444 -#Similar to me: Max length -# 4 changes: Max height: -# translation: Hang&súly: -msgid "Max length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2074 -msgid "Max line overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3387 -msgid "Max print speed for Autospeed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4445 -msgid "Max small perimeters length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1801 -#Similar to me: Max speed -# 2 changes: Fan speed -# translation: Ventilátor sebesség -msgid "Max speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2455 -#Similar to me: Max speed of object first layer over raft interface -# 5 changes: Speed of object first layer over raft interface -# translation: A tárgy első rétegének sebessége a tutajfelületen -# 17 changes: First object layer over raft interface -# translation: Első objektum réteg a tutaj felett -msgid "Max speed of object first layer over raft interface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1825 -msgid "Max speed on the wipe tower" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3400 -msgid "Max speed reduction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5490 -msgid "Max Wipe deviation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3338 -#Similar to me: Maximum acceleration when travelling (M204 T) -# 7 changes: Maximum acceleration when retracting (M204 R) -# translation: Maximum gyorsulás visszahúzáskor (M204 R) -# 10 changes: Maximum acceleration for travel moves (M204 T) -# translation: Maximum gyorsulás utazási mozgásokhoz (M204 T) -# 15 changes: Maximum acceleration when retracting -# translation: Maximum gyorsulás visszahúzáskor -msgid "Maximum acceleration when travelling (M204 T)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:860 -msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" -"If set to ~178, brim will be created on everything but straight sections." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5710 -msgid "" -"Maximum area for the hole where the hole_size_compensation will apply fully. " -"After that, it will decrease down to 0 for four times this area. Set to 0 to " -"let the hole_size_compensation apply fully for all detected holes" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5731 -#, possible-c-format, possible-boost-format -msgid "" -"Maximum defection of a point to the estimated radius of the circle.\n" -"As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " -"broaden the detection.\n" -"In mm or in % of the radius." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:789 -msgid "" -"Maximum density for bridge lines. If you want more space between line (or " -"less), you can modify it. A value of 50% will create two times less lines, " -"and a value of 200% will create two time more lines that overlap each other." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1136 -msgid "" -"Maximum distance between two points to allow adding new ones. Allow to avoid " -"distorting long strait areas.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3345 -msgid "Maximum G1 per second" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1803 -#Similar to me: Maximum speed allowed for this filament. Limits the maximum speed of a print to the minimum of the print speed and the filament speed. Set zero for no limit. -# 48 changes: Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit. -# translation: A maximális megengedett térfogati sebesség ennél a szálnál. A nyomtatás maximális térfogati sebességét a nyomtatási-, és a filament térfogati sebességének minimumára korlátozza. Nulla értékre állítva nincs korlátozás. -msgid "" -"Maximum speed allowed for this filament. Limits the maximum speed of a print " -"to the minimum of the print speed and the filament speed. Set zero for no " -"limit." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1815 -#Similar to me: Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set zero for no limit. -# 3 changes: Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit. -# translation: A maximális megengedett térfogati sebesség ennél a szálnál. A nyomtatás maximális térfogati sebességét a nyomtatási-, és a filament térfogati sebességének minimumára korlátozza. Nulla értékre állítva nincs korlátozás. -msgid "" -"Maximum volumetric speed allowed for this filament. Limits the maximum " -"volumetric speed of a print to the minimum of print and filament volumetric " -"speed. Set zero for no limit." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5491 -msgid "Maximum Wipe deviation to the inside" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6439 -#Similar to me: Merging bridges or pillars into other pillars can increase the radius. Zero means no increase, one means full increase. -# 2 changes: Merging bridges or pillars into another pillars can increase the radius. Zero means no increase, one means full increase. -# translation: A hidak vagy pillérek egy másik pillérbe való beolvasztása növelheti a sugarat. A nulla azt jelenti, hogy nincs növelés, az egy pedig teljes növelést jelent. -msgid "" -"Merging bridges or pillars into other pillars can increase the radius. Zero " -"means no increase, one means full increase." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5175 -msgid "Merging with perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3133 -msgid "Method" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:291 src/libslic3r/ExtrusionEntity.cpp:293 -#: src/libslic3r/ExtrusionEntity.cpp:335 -msgid "Mill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5891 -msgid "Milling cutter" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2414 -msgid "Milling cutters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5907 -#Similar to me: Milling diameter -# 4 changes: Pillar diameter -# translation: Pillér átmérője -# 6 changes: Hole diameter -# translation: Furat átmérő -msgid "Milling diameter" -msgstr "" - - -#: src/libslic3r/GCode.cpp:818 -#Similar to me: Milling End G-code -# 5 changes: Filament End G-code -# translation: Filament Vége G-kód -msgid "Milling End G-code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5981 -msgid "Milling extra XY size" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5992 -msgid "Milling only after" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5973 -msgid "Milling post-processing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6002 -#Similar to me: Milling Speed -# 4 changes: Filling bed -# translation: Tárgyasztal kitöltése -# 5 changes: Loading speed -# translation: Betöltési sebesség -msgid "Milling Speed" -msgstr "" - - -#: src/libslic3r/GCode.cpp:811 -#Similar to me: Milling Start G-code -# 5 changes: Filament Start G-code -# translation: Filament Kezdete G-kód -# 8 changes: Start G-code -# translation: G-kód kezdete -msgid "Milling Start G-code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1902 -msgid "milliseconds" -msgstr "" - - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76 -#, possible-c-format, possible-boost-format -msgid "min %s version" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:773 -#Similar to me: Min bridge density -# 6 changes: Max bridge length -# translation: Híd max. hossza -msgid "Min bridge density" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1103 -msgid "Min concave angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1088 -msgid "Min convex angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2483 -#Similar to me: Min first layer speed -# 5 changes: First layer speed -# translation: Sebesség az első rétegnél -msgid "Min first layer speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3189 -msgid "Min height for travel" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3473 -#Similar to me: Min layer height -# 4 changes: First layer height -# translation: Első réteg magasság -# 5 changes: Display height -# translation: Kijelző magasság -# 5 changes: Layer height -# translation: Réteg magasság -msgid "Min layer height" -msgstr "" - - -#: src/libslic3r/Print.cpp:823 -#Similar to me: Min layer height can't be greater than Max layer height -# 18 changes: First layer height can't be greater than nozzle diameter -# translation: Az első réteg magassága nem lehet nagyobb, mint a fúvóka átmérője -# 19 changes: Layer height can't be greater than nozzle diameter -# translation: A réteg magassága nem lehet nagyobb, mint a fúvóka átmérője -msgid "Min layer height can't be greater than Max layer height" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4430 -#Similar to me: Min length -# 4 changes: Min height: -# translation: A betűkészlet hangsúlya. -msgid "Min length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4431 -msgid "Min small perimeters length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2587 -msgid "Min surface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2588 -msgid "Min surface for gap filling" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5151 -#Similar to me: Min width -# 3 changes: Brim width -# translation: Karima szélesség -# 3 changes: Max width: -# translation: Helyette: -msgid "Min width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1106 -msgid "" -"Minimum (concave) angle at a vertex to enable smoothing (trying to create a " -"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " -"be smoothened." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1091 -msgid "" -"Minimum (convex) angle at a vertex to enable smoothing (trying to create a " -"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " -"be smoothened." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:776 -#, possible-c-format, possible-boost-format -msgid "" -"Minimum density for bridge lines. If Lower than bridge_overlap, then the " -"overlap value can be lowered automatically down to this value. If the value " -"is higher, this parameter has no effect.\n" -"Default to 87.5% to allow a little void between the lines." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4080 -msgid "" -"Minimum detail resolution, used for internal structures (gapfill and some " -"infill patterns).\n" -"Don't put a too-small value (0.05mm is way too low for many printers), as it " -"may create too many very small segments that may be difficult to display and " -"print." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4052 -#Similar to me: Minimum detail resolution, used to simplify the input file for speeding up the slicing job and reducing memory usage. High-resolution models often carry more details than printers can render. Set zero to disable any simplification and use full resolution from input. \nNote: Slic3r has an internal working resolution of 0.0001mm.\nInfill & Thin areas are simplified up to 0.0125mm. -# 119 changes: Minimum detail resolution, used to simplify the input file for speeding up the slicing job and reducing memory usage. High-resolution models often carry more detail than printers can render. Set to zero to disable any simplification and use full resolution from input. -# translation: Minimális részletfelbontás; a bemeneti fájl egyszerűsítésére szolgál a szeletelési feladat felgyorsítása és a memóriahasználat csökkentése érdekében. A nagy felbontású modellek gyakran több részletet tartalmaznak, mint amennyit a nyomtatók meg tudnak jeleníteni. Állítsa nullára az egyszerűsítés letiltásához, és a bemenetről származó teljes felbontás használatához. -msgid "" -"Minimum detail resolution, used to simplify the input file for speeding up " -"the slicing job and reducing memory usage. High-resolution models often " -"carry more details than printers can render. Set zero to disable any " -"simplification and use full resolution from input. \n" -"Note: Slic3r has an internal working resolution of 0.0001mm.\n" -"Infill & Thin areas are simplified up to 0.0125mm." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3487 -msgid "Minimum extrusion length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6739 -msgid "Minimum resolution in nanometers" -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l45 -#Similar to me: Minimum retraction -# 7 changes: Minimum feedrates -# translation: Minimum előtolások -msgid "Minimum retraction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2485 -msgid "" -"Minimum speed when printing the first layer.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3499 -msgid "Minimum top width for infill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3692 -#, possible-c-format, possible-boost-format -msgid "" -"Minimum unsupported width for an extrusion to apply the bridge fan & " -"overhang speed to this overhang. Can be in mm or in a % of the nozzle " -"diameter. Set to 0 to deactivate overhangs." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3704 -#, possible-c-format, possible-boost-format -msgid "" -"Minimum unsupported width for an extrusion to apply the bridge flow to this " -"overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to " -"deactivate bridge flow for overhangs." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6140 -#Similar to me: minimum width -# 5 changes: Brim width -# translation: Karima szélesség -# 5 changes: Pinhead width -# translation: Tűfej szélessége -msgid "minimum width" -msgstr "" - -#: ../../ui_layout/default/print.ui : l29 -#Similar to me: Minimum width -# 5 changes: Brim width -# translation: Karima szélesség -# 5 changes: Pinhead width -# translation: Tűfej szélessége -msgid "Minimum width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5154 -msgid "" -"Minimum width for the extrusion to be extruded (widths lower than the nozzle " -"diameter will be over-extruded at the nozzle diameter). If expressed as " -"percentage (for example 110%) it will be computed over nozzle diameter. The " -"default behavior of PrusaSlicer is with a 33% value. Put 100% to avoid any " -"sort of over-extrusion." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6142 -#Similar to me: Minimum width of features to maintain when doing the first layer compensation. -# 12 changes: Minimum width of features to maintain when doing elephant foot compensation. -# translation: Az elefántláb-kompenzáció során megőrzendő jellemzők minimális szélessége. -msgid "" -"Minimum width of features to maintain when doing the first layer " -"compensation." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2337 -#Similar to me: mm/% -# 1 changes: mm/s -# translation: mm/s -msgid "mm/%" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1181 -msgid "mm/s for %-based speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1911 src/libslic3r/PrintConfig.cpp:1920 -#Similar to me: mm/sec -# 2 changes: mm/s -# translation: mm/s -# 2 changes: mm/s² -# translation: mm/s² -msgid "mm/sec" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:659 src/libslic3r/PrintConfig.cpp:673 -#: src/libslic3r/PrintConfig.cpp:874 src/libslic3r/PrintConfig.cpp:1152 -#: src/libslic3r/PrintConfig.cpp:1473 src/libslic3r/PrintConfig.cpp:2360 -#: src/libslic3r/PrintConfig.cpp:2571 src/libslic3r/PrintConfig.cpp:2725 -#: src/libslic3r/PrintConfig.cpp:3027 src/libslic3r/PrintConfig.cpp:3668 -#: src/libslic3r/PrintConfig.cpp:3782 src/libslic3r/PrintConfig.cpp:4687 -#: src/libslic3r/PrintConfig.cpp:4728 src/libslic3r/PrintConfig.cpp:4750 -#: src/libslic3r/PrintConfig.cpp:5190 src/libslic3r/PrintConfig.cpp:5334 -#: src/libslic3r/PrintConfig.cpp:5387 -#Similar to me: mm/s² or % -# 1 changes: mm/s or % -# translation: mm/s vagy % -# 3 changes: mm or % -# translation: mm vagy % -msgid "mm/s² or %" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5555 src/libslic3r/PrintConfig.cpp:5572 -#Similar to me: mm3 -# 1 changes: mm -# translation: mm -# 1 changes: mm² -# translation: mm² -# 1 changes: mm³ -# translation: mm³ -msgid "mm3" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3533 src/libslic3r/PrintConfig.cpp:3534 -msgid "Model rounding precision" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Modifying slices" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1290 src/libslic3r/PrintConfig.cpp:1320 -#: src/libslic3r/PrintConfig.cpp:1351 -msgid "Monotonic (filled)" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1980 -msgid "Mosaic from picture" -msgstr "" - - -#: src/slic3r/GUI/GUI.cpp:350 -#, possible-boost-format -#Similar to me: Most likely the configuration was produced by a newer version of %1% or PrusaSlicer. -# 24 changes: Most likely the configuration was produced by a newer version of PrusaSlicer or by some PrusaSlicer fork. -# translation: Valószínűleg a konfigurációt a PrusaSlicer újabb verziója vagy egyéb PrusaSlicer változat készítette. -msgid "" -"Most likely the configuration was produced by a newer version of %1% or " -"PrusaSlicer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3161 -msgid "" -"Move the fan start in the past by at least this delay (in seconds, you can " -"use decimals). It assumes infinite acceleration for this time estimation, " -"and will only take into account G1 and G0 moves.\n" -"It won't move fan comands from custom gcodes (they act as a sort of " -"'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" -"Use 0 to deactivate." -msgstr "" - -#: ../../ui_layout/default/filament.ui -#Similar to me: Multimaterial -# 5 changes: Material -# translation: Anyag -# 5 changes: SLA material -# translation: SLA anyag -msgid "Multimaterial" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Multimaterial toolchange string reduction" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Multimaterial toolchange temperature" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Multiple extruders -# 1 changes: Multiple Extruders -# translation: Több Extruder -# 7 changes: Infill extruder -# translation: Kitöltés extruder -msgid "Multiple extruders" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5569 -msgid "Multiplier" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "Name and Size" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:42 -msgid "Nb down:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:42 -msgid "Nb tests:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:45 -msgid "Nb up:" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:77 -#Similar to me: New project, clear platter -# 1 changes: New project, clear plater -# translation: Új projekt, üres tárgyasztal -msgid "New project, clear platter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3734 -msgid "No perimeters on bridge areas" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4695 -#Similar to me: No solid infill over -# 6 changes: Solid infill every -# translation: Tömör kitöltés minden -# 7 changes: Top solid infill -# translation: Felső tömör kitöltés -# 7 changes: top solid infill -# translation: felső tömör kitöltés -msgid "No solid infill over" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4696 -msgid "No solid infill over perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4802 -#Similar to me: None (soluble) -# 4 changes: 0 (soluble) -# translation: 0 (oldható) -msgid "None (soluble)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2806 src/libslic3r/PrintConfig.cpp:2824 -#: src/libslic3r/PrintConfig.cpp:2842 src/libslic3r/PrintConfig.cpp:2860 -msgid "Not connected" -msgstr "" - -#: ../../ui_layout/default/print.ui : l41 -msgid "Not on first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4205 -msgid "Not on top" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:46 -msgid "Note that only Multiple of 5 can be engraved in the part" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2324 -#, possible-c-format, possible-boost-format -#Similar to me: Note: All parameters from this group are moved to the Physical Printer settings (see changelog).\n\nA new Physical Printer profile is created by clicking on the \"cog\" icon right of the Printer profiles combo box, by selecting the \"Add physical printer\" item in the Printer combo box. The Physical Printer profile editor opens also when clicking on the \"cog\" icon in the Printer settings tab. The Physical Printer profiles are being stored into %s/physical_printer directory. -# 10 changes: Note: All parameters from this group are moved to the Physical Printer settings (see changelog).\n\nA new Physical Printer profile is created by clicking on the \"cog\" icon right of the Printer profiles combo box, by selecting the \"Add physical printer\" item in the Printer combo box. The Physical Printer profile editor opens also when clicking on the \"cog\" icon in the Printer settings tab. The Physical Printer profiles are being stored into PrusaSlicer/physical_printer directory. -# translation: Megjegyzés: Az összes paraméter ebből a csoportból átkerül a Fizikai nyomtató beállításaiba (lásd a változásnaplót).\n\nEgy új fizikai nyomtató profil létrehozásához kattintson a nyomtatóprofilok legördülő mezőtől jobbra található \"fogaskerék\" ikonra, a Nyomtató legördülő mezőben pedig a \"Fizikai nyomtató hozzáadása\" elemet válassza. A Fizikai nyomtató profil szerkesztője akkor is megnyílik, ha a Nyomtató beállításai lapon a \"fogaskerék\" ikonra kattint. A fizikai nyomtató profilok a PrusaSlicer/physical_printer könyvtárban kerülnek tárolásra. -msgid "" -"Note: All parameters from this group are moved to the Physical Printer " -"settings (see changelog).\n" -"\n" -"A new Physical Printer profile is created by clicking on the \"cog\" icon " -"right of the Printer profiles combo box, by selecting the \"Add physical " -"printer\" item in the Printer combo box. The Physical Printer profile editor " -"opens also when clicking on the \"cog\" icon in the Printer settings tab. " -"The Physical Printer profiles are being stored into %s/physical_printer " -"directory." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5553 -#Similar to me: Nozzle volume -# 3 changes: Bottle volume -# translation: Flakon térfogata -msgid "Nozzle volume" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4382 -#Similar to me: Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set zero to disable skirt completely. -# 8 changes: Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set this to zero to disable skirt completely. -# translation: A szoknyát alkotó hurkok minimális száma. Ha a Minimális Extrudálási Hossz opció be van állítva, akkor a hurkok száma nagyobb lehet, mint az itt beállított. A szoknya teljes kikapcsolásához állítsa ezt nullára. -msgid "" -"Number of loops for the skirt. If the Minimum Extrusion Length option is " -"set, the number of loops might be greater than the one configured here. Set " -"zero to disable skirt completely." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2415 -#Similar to me: Number of milling heads. -# 8 changes: Number of cooling moves -# translation: Hűtési lépések száma -msgid "Number of milling heads." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3726 -#, possible-c-format, possible-boost-format -msgid "" -"Number of mm the overhang need to be for the reversal to be considered " -"useful. Can be a % of the perimeter width." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:2071 -#, possible-c-format, possible-boost-format -msgid "O&pen %s" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1041 -#Similar to me: Object sort -# 4 changes: Object name -# translation: Objektum neve -# 4 changes: Objects List -# translation: Objektumok Listája -msgid "Object sort" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:909 -msgid "" -"Offset of brim from the printed object. Should be kept at 0 unless you " -"encounter great difficulties to separate them.\n" -"It's subtracted to brim_width and brim_width_interior, so it has to be lower " -"than them. The offset is applied after the first layer XY compensation " -"(elephant foot)." -msgstr "" - -#: ../../ui_layout/default/extruder.ui -#Similar to me: Offsets (for multi-extruder printers) -# 7 changes: Position (for multi-extruder printers) -# translation: Pozíció (több extruderes nyomtatók esetében) -msgid "Offsets (for multi-extruder printers)" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1129 -msgid "" -"Old layout: all windows are in the application, settings are on the top tab " -"bar and the platter choice in on the bottom of the platter view." -msgstr "" - -#: ../../ui_layout/default/print.ui : l187 -msgid "On" -msgstr "" - -#: ../../ui_layout/default/print.ui : l27 -#Similar to me: On first layer -# 4 changes: First layer -# translation: Első réteg -msgid "On first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1554 -#Similar to me: On odd layers -# 5 changes: Add Layers -# translation: Rétegek hozzáadása -# 5 changes: Faded layers -# translation: Áttűnő rétegek -# 5 changes: Other layers -# translation: További rétegek -msgid "On odd layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1543 -msgid "On overhangs" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:658 -msgid "" -"On some OS like MacOS or some Linux, tooltips can't stay on for a long time. " -"This setting replaces native tooltips with custom dialogs to improve " -"readability (only for settings).\n" -"Note that for the number controls, you need to hover the arrows to get the " -"custom tooltip. Also, it keeps the focus but will give it back when it " -"closes. It won't show up if you are editing the field." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4195 -msgid "On surfaces" -msgstr "" - -#: ../../ui_layout/default/print.ui : l28 -#Similar to me: On top surfaces -# 3 changes: All top surfaces -# translation: Minden felső felület -msgid "On top surfaces" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "one test" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: One-loop perimeters -# 7 changes: Overhang perimeter -# translation: Túllógó kerület -# 7 changes: Small perimeters -# translation: Kicsi kerületek -msgid "One-loop perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4603 -#Similar to me: Only custom Start G-code -# 9 changes: Filament Start G-code -# translation: Filament Kezdete G-kód -msgid "Only custom Start G-code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1518 -msgid "" -"Only do the vase trick on the external side. Useful when the thickness is " -"too low." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1526 -msgid "" -"Only do the vase trick on the external side. Useful when you only want to " -"remove seam from screw hole." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:852 -msgid "Only draw brim over the sharp edges of the model." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1523 -msgid "Only for inner side" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1515 -msgid "Only for outer side" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui : l38 -msgid "Only for overhangs" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:208 -msgid "Only if on platter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4206 -msgid "Only on top" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3627 -msgid "Only one peri - other algo" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Only one perimeter -# 6 changes: Overhang perimeter -# translation: Túllógó kerület -msgid "Only one perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3613 -msgid "Only one perimeter on First layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3620 -msgid "Only one perimeter on Top surfaces" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5275 -msgid "" -"Only used for Klipper, where you can name the extruder. If not set, will be " -"'extruderX' with 'X' replaced by the extruder number." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:209 -msgid "Only when GCode is ready" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:92 src/slic3r/GUI/MainFrame.cpp:2071 -#, possible-c-format, possible-boost-format -msgid "Open %s" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:92 -#: src/slic3r/GUI/MainFrame.cpp:1913 -#, possible-c-format, possible-boost-format -#Similar to me: Open a new %s instance -# 5 changes: Open new instance -# translation: Új példány megnyitása -# 7 changes: Open New Instance -# translation: Új Példány Megnyitása -msgid "Open a new %s instance" -msgstr "" - - -#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:419 -#Similar to me: Open Client certificate file -# 5 changes: Open CA certificate file -# translation: CA tanúsítvány fájl megnyitása -msgid "Open Client certificate file" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:78 -#Similar to me: Open project STL/OBJ/AMF/3MF with config, clear platter -# 1 changes: Open project STL/OBJ/AMF/3MF with config, clear plater -# translation: STL/OBJ/AMF/3MF projekt megnyitása konfigurációval, üres tárgyasztal -# 17 changes: Import STL/OBJ/AMF/3MF without config, keep plater -# translation: STL/OBJ/AMF/3MF Importálása konfiguráció nélkül, a tárgyasztal megtartásával -msgid "Open project STL/OBJ/AMF/3MF with config, clear platter" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1559 -#, possible-c-format, possible-boost-format -#Similar to me: Open the %s releases page in your browser -# 8 changes: Open the software releases page in your browser -# translation: A szoftverkiadások oldal megnyitása böngészőben -# 10 changes: Open the %s website in your browser -# translation: A %s webhely megnyitása böngészőben -msgid "Open the %s releases page in your browser" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1561 -#, possible-c-format, possible-boost-format -#Similar to me: Open the %s wiki in your browser -# 5 changes: Open the %s website in your browser -# translation: A %s webhely megnyitása böngészőben -msgid "Open the %s wiki in your browser" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1570 -#Similar to me: Open the Slic3r Manual in your browser -# 13 changes: Open the %s website in your browser -# translation: A %s webhely megnyitása böngészőben -msgid "Open the Slic3r Manual in your browser" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1563 -#Similar to me: Open the Slic3r website in your browser -# 6 changes: Open the %s website in your browser -# translation: A %s webhely megnyitása böngészőben -msgid "Open the Slic3r website in your browser" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Options for support material interface -# 6 changes: Options for support material and raft -# translation: Támaszanyag és a tutaj lehetőségei -# 13 changes: Support material interface -# translation: Támaszanyag interfész -msgid "Options for support material interface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5672 -#Similar to me: Outer -# 2 changes: Other -# translation: Egyéb -# 2 changes: Enter -# translation: Nyomtató -msgid "Outer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5673 -#Similar to me: Outer XY size compensation -# 8 changes: XY Size Compensation -# translation: XY méret kompenzáció -msgid "Outer XY size compensation" -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui -msgid "Output" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6727 -#Similar to me: Output Format -# 5 changes: Output File -# translation: Kimeneti Fájl -msgid "Output Format" -msgstr "" - -#: ../../ui_layout/default/print.ui : l293 -msgid "Over raft" -msgstr "" - - -#: src/slic3r/GUI/CalibrationOverBridgeDialog.cpp:30 -msgid "Over-Bridge calibration" -msgstr "" - - -#: src/slic3r/GUI/CalibrationOverBridgeDialog.cpp:47 -msgid "Over-bridge calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3663 -msgid "Overhang acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3702 -#Similar to me: Overhang bridge flow threshold -# 12 changes: Overhang threshold -# translation: Túlnyúlási küszöbértéke -msgid "Overhang bridge flow threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3690 -msgid "Overhang bridge speed threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3715 -msgid "Overhang reversal" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3724 -#Similar to me: Overhang reversal threshold -# 9 changes: Overhang threshold -# translation: Túlnyúlási küszöbértéke -msgid "Overhang reversal threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3662 src/libslic3r/PrintConfig.cpp:3676 -msgid "Overhangs" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3677 -msgid "Overhangs speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5167 -msgid "" -"Overlap between the thin wall and the perimeters. Can be a % of the external " -"perimeter width (default 50%)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5130 src/libslic3r/PrintConfig.cpp:5131 -#Similar to me: Overlapping all perimeters -# 9 changes: Overhang perimeter -# translation: Túllógó kerület -# 10 changes: Generating perimeters -# translation: Kerületek generálása -msgid "Overlapping all perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5119 src/libslic3r/PrintConfig.cpp:5120 -msgid "Overlapping external perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4131 -msgid "" -"Override the retract_length setting from the printer config. Used for " -"calibration. Set negative to disable" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5106 -msgid "" -"Override the temperature of the extruder. Avoid making too many changes, it " -"won't stop for cooling/heating. 0 to disable. May only work on Height range " -"modifiers." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:473 -#Similar to me: Paths -# 2 changes: Pages -# translation: Oldalak -msgid "Paths" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5000 -#, possible-c-format, possible-boost-format -msgid "" -"Pattern for interface layers.\n" -"Note that 'Hilbert', 'Ironing' and '(filled)' patterns are meant to be used " -"with soluble supports and 100% fill interface layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:896 -msgid "" -"Pattern for the ear. The concentric is the default one. The rectilinear has " -"a perimeter around it, you can try it if the concentric has too many " -"problems to stick to the build plate." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1900 -msgid "Pause before extraction " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1891 -msgid "Pause in melt zone" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3060 -msgid "" -"Percent of a flow rate relative to object's normal layer height. It's the " -"percentage of the layer that will be over-extruded on top to do the ironing." -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: perimeter -# 1 changes: Perimeter -# translation: Kerület -# 1 changes: perimeters -# translation: határ _ nyomtatásakor -# 2 changes: Perimeters -# translation: Kerületek -msgid "perimeter" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Perimeter acceleration -# 8 changes: Maximum accelerations -# translation: Maximum gyorsulások -# 8 changes: Parameter validation -# translation: Paraméter hitelesítés -msgid "Perimeter acceleration" -msgstr "" - -#: ../../ui_layout/default/print.ui : l144 -msgid "Perimeter anchor" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3791 -msgid "Perimeter bonding" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3864 -msgid "Perimeter loop seam" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3876 -msgid "perimeter overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3877 -msgid "Perimeter overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3837 -#Similar to me: Perimeter spacing -# 6 changes: Pattern spacing -# translation: Mintázat térköze -msgid "Perimeter spacing" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Perimeter speed -# 5 changes: Perimeters -# translation: Kerületek -# 5 changes: Print speed -# translation: Nyomtatási sebesség -# 6 changes: Perimeter -# translation: Kerület -msgid "Perimeter speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3817 -#Similar to me: Perimeter width -# 6 changes: Brim width -# translation: Karima szélesség -# 6 changes: Perimeter -# translation: Kerület -# 6 changes: Perimeters -# translation: Kerületek -msgid "Perimeter width" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Perimeters & Shell" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3914 -#Similar to me: Perimeters count -# 6 changes: Perimeters -# translation: Kerületek -msgid "Perimeters count" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3854 src/libslic3r/PrintConfig.cpp:3855 -#Similar to me: Perimeters loop -# 5 changes: Perimeters -# translation: Kerületek -# 6 changes: Perimeter -# translation: Kerület -# 6 changes: perimeters -# translation: határ _ nyomtatásakor -msgid "Perimeters loop" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2546 -#, possible-c-format, possible-boost-format -#Similar to me: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall.\nCan be a % of the nozzle diameter. -# 36 changes: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall. -# translation: A kerületeket a Fuzzy bőr pontok beillesztésével több szegmensre osztjuk. A Fuzzy bőr pontok távolságának csökkentése növeli a véletlenszerűen eltolt pontok számát a kerületi falon. -msgid "" -"Perimeters will be split into multiple segments by inserting Fuzzy skin " -"points. Lowering the Fuzzy skin point distance will increase the number of " -"randomly offset points on the perimeter wall.\n" -"Can be a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5560 -msgid "Pigment percentage" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:182 src/slic3r/GUI/MainFrame.cpp:368 -#: src/slic3r/GUI/MainFrame.cpp:460 src/slic3r/GUI/MainFrame.cpp:637 -#: src/slic3r/GUI/MainFrame.cpp:640 src/slic3r/GUI/MainFrame.cpp:699 -#: src/slic3r/GUI/MainFrame.cpp:742 src/slic3r/GUI/MainFrame.cpp:745 -#Similar to me: Platter -# 1 changes: Plater -# translation: Tárgyasztal -# 2 changes: Pattern -# translation: Mintázat -msgid "Platter" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:776 -msgid "Platter icons Color template" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5729 -msgid "Polyhole detection margin" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5742 -msgid "Polyhole twist" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4257 -msgid "" -"Position of perimeters' starting points.\n" -"Cost-based option let you choose the angle and travel cost. A high angle " -"cost will place the seam where it can be hidden by a corner, the travel cost " -"place the seam near the last position (often at the end of the previous " -"infill)." -msgstr "" - -#: ../../ui_layout/default/print.ui : l72 -msgid "Position of perimeters' starting points.\nCustom can be defined in Advanced or Expert mode. Cost-based settings let you choose the angle and travel cost. A high angle cost will place the seam where it can be hidden by a corner, the travel cost place the seam near the last position (often at the end of the previous infill)." -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Post-processing milling -# 7 changes: Post-processing scripts -# translation: Utófeldolgozó szkriptek -msgid "Post-processing milling" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Post-processing script -# 1 changes: Post-processing scripts -# translation: Utófeldolgozó szkriptek -msgid "Post-processing script" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1117 -msgid "Precision" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5773 -#Similar to me: Preferred orientation -# 8 changes: Optimize orientation -# translation: Tájolás optimalizálása -msgid "Preferred orientation" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:225 -msgid "Presets and updates" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:561 -msgid "" -"Prevent the gcode builder from triggering an exception if a full layer is " -"empty, and allow the print to start from thin air afterward." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1966 -msgid "Print a calibration cube, for various calibration goals." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1033 -msgid "Print all brim at startup" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:392 -msgid "Print at the end" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1506 -msgid "" -"Print contour perimeters in two circles, in a continuous way, like for a " -"vase mode. It needs the external_perimeters_first parameter to work. \n" -"Doesn't work for the first layer, as it may damage the bed overwise. \n" -"Note that it will use min_layer_height from your hardware setting as the " -"base height (it doesn't start at 0), so be sure to put here the lowest value " -"your printer can handle. if it's not lower than two times the current layer " -"height, it falls back to the normal algorithm, as there is not enough room " -"to do two loops." -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Print remaining times -# 7 changes: Supports remaining times -# translation: Hátralévő idő támogatása -# 8 changes: Remaining time -# translation: Hátralévő idő -# 8 changes: Remaining time: -# translation: A hátralevő idő : -msgid "Print remaining times" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:141 -#, possible-boost-format -msgid "" -"print speed will be reduced so that no less than %1%s are spent on that layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:393 -msgid "" -"Print the thumbnail code at the end of the gcode file instead of the front.\n" -"Be careful! Most firmwares expect it at the front, so be sure that your " -"firmware support it." -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Processing limit -# 5 changes: Processing %s -# translation: Feldolgozás %s -msgid "Processing limit" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6733 -msgid "Prusa SL1" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5947 -msgid "" -"Put here the gcode to change the toolhead (called after the g-code " -"T{next_extruder}). You have access to {next_extruder} and " -"{previous_extruder}. next_extruder is the 'extruder number' of the new " -"milling tool, it's equal to the index (begining at 0) of the milling tool " -"plus the number of extruders. previous_extruder is the 'extruder number' of " -"the previous tool, it may be a normal extruder, if it's below the number of " -"extruders. The number of extruder is available at {extruder} and the number " -"of milling tool is available at {milling_cutter}." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5589 -msgid "Quadratric" -msgstr "" - - -#: src/slic3r/GUI/FreeCADDialog.cpp:249 -#Similar to me: Quick Save -# 3 changes: Quick Slice -# translation: Gyors Szeletelés -msgid "Quick Save" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4020 -#Similar to me: Raft first layer density -# 6 changes: First layer density -# translation: Első réteg sűrűsége -msgid "Raft first layer density" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4031 -#Similar to me: Raft first layer expansion -# 6 changes: First layer expansion -# translation: Első réteg túlnyúlása -msgid "Raft first layer expansion" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:497 -#, possible-boost-format -msgid "" -"Recommended min extrusion width for other layers (with a layer height of " -"%1%) is %2$.3f mm (or %3%%%).\n" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:495 -#, possible-boost-format -msgid "" -"Recommended min extrusion width for the first layer (with a first layer " -"height of %1%) is %2$.3f mm (or %3%%%)\n" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:458 -#, possible-c-format, possible-boost-format -#Similar to me: Recommended object min (thick) wall thickness for layer height %.2f and -# 8 changes: Recommended object thin wall thickness for layer height %.2f and -# translation: Az objektum javasolt vékony falvastagsága %.2f rétegmagassághoz és -msgid "Recommended object min (thick) wall thickness for layer height %.2f and" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:417 -#Similar to me: Recommended object min thin wall thickness: Not available due to invalid layer height. -# 4 changes: Recommended object thin wall thickness: Not available due to invalid layer height. -# translation: Az objektum javasolt vékony falvastagsága: Nem elérhető az érvénytelen rétegmagasság miatt. -# 28 changes: Top / bottom shell thickness hint: Not available due to invalid layer height. -# translation: Felső/alsó héj vastagságra vonatkozó tipp: Nem érhető el az érvénytelen rétegmagasság miatt. -# 31 changes: Recommended object thin wall thickness: Not available due to excessively small extrusion width. -# translation: Az objektum javasolt vékony falvastagsága: Nem elérhető a túl kicsi extrudálási szélesség miatt. -msgid "" -"Recommended object min thin wall thickness: Not available due to invalid " -"layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1349 -#Similar to me: Rectilinear (filled) -# 6 changes: Rectilinear grid -# translation: Egyenesvonalú háló -msgid "Rectilinear (filled)" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:102 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:210 -#Similar to me: Reload platter from disk -# 1 changes: Reload plater from disk -# translation: Tárgyasztal újratöltése lemezről -# 5 changes: Reload the plater from disk -# translation: Tárgyasztal újratöltése lemezről -# 6 changes: Reload all from disk -# translation: Minden újratöltése lemezről -msgid "Reload platter from disk" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:208 src/slic3r/GUI/MainFrame.cpp:1855 -#: src/slic3r/GUI/MainFrame.cpp:2060 -#Similar to me: Reload the platter from disk -# 1 changes: Reload the plater from disk -# translation: Tárgyasztal újratöltése lemezről -# 5 changes: Reload plater from disk -# translation: Tárgyasztal újratöltése lemezről -# 10 changes: Reload all from disk -# translation: Minden újratöltése lemezről -msgid "Reload the platter from disk" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:67 -msgid "Remove fil. slowdown" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3750 -#Similar to me: Remove perimeters -# 3 changes: Remove parameter -# translation: Paraméter eltávolítása -# 5 changes: Small perimeters -# translation: Kicsi kerületek -msgid "Remove perimeters" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1171 -#Similar to me: Retr. -# 2 changes: Rear -# translation: Hátul -msgid "Retr." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:105 -msgid "Retraction calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4129 -#Similar to me: Retraction length -# 1 changes: Retraction Length -# translation: Visszahúzás hossza -# 6 changes: Retraction Speed -# translation: Visszahúzási Sebesség -msgid "Retraction length" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -#Similar to me: Retraction wipe -# 4 changes: Retraction Speed -# translation: Visszahúzási Sebesség -# 5 changes: Retraction -# translation: Visszahúzás -# 5 changes: Retractions -# translation: Visszahúzások -msgid "Retraction wipe" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3714 -msgid "Reverse on odd" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3723 -#Similar to me: Reverse threshold -# 6 changes: Overhang threshold -# translation: Túlnyúlási küszöbértéke -msgid "Reverse threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1052 -#Similar to me: Right panel -# 4 changes: Right View -# translation: Jobbnézet -msgid "Right panel" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5775 -msgid "Rotate stl around z axes while adding them to the bed." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5744 -msgid "Rotate the polyhole every layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3889 -msgid "Round corners" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3890 -msgid "Round corners for perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5728 -msgid "Roundness margin" -msgstr "" - -#: ../../ui_layout/default/filament.ui : l31 -msgid "Run the fan at default speed when possible" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:5015 -#Similar to me: Sawtooth -# 3 changes: Smooth -# translation: Sima -msgid "Sawtooth" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2271 -#Similar to me: Scattered Rectilinear -# 7 changes: Aligned Rectilinear -# translation: Igazított Egyenes -msgid "Scattered Rectilinear" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1977 -msgid "Script help page" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Seam -# 1 changes: Seams -# translation: Varratok -msgid "Seam" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4274 -msgid "Seam angle cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4293 -msgid "Seam gap" -msgstr "" - - -#: src/slic3r/GUI/GUI_ObjectList.cpp:3798 -#Similar to me: Seam Position -# 1 changes: Seam position -# translation: Varrat pozíció -# 2 changes: Set Position -# translation: Helyzet Beállítása -# 5 changes: Position -# translation: Pozíció -msgid "Seam Position" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4284 -msgid "Seam travel cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5721 -msgid "" -"Search for almost-circular holes that span more than one layer and convert " -"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " -"compute the polyhole.\n" -"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:257 -#Similar to me: Section -# 1 changes: Sections -# translation: Szakaszok -# 2 changes: Action -# translation: Művelet -# 2 changes: Selection -# translation: Kiválasztott -msgid "Section" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 -#Similar to me: Select 3d editor Tab -# 7 changes: Select Plater Tab -# translation: Tárgyasztal Fül Kiválasztása -msgid "Select 3d editor Tab" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:35 -msgid "" -"Select a goal, this will change settings to increase the effects to search." -msgstr "" - - -#: src/slic3r/GUI/ConfigWizard.cpp:2949 -#Similar to me: Select all standard printers in this page -# 13 changes: Select all standard printers -# translation: Az összes standard nyomtató kiválasztása -msgid "Select all standard printers in this page" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 -msgid "Select Gcode preview Tab" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:109 -msgid "Select Layer Preview Tab" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:36 -msgid "Select the number milimeters for the tower." -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:36 -#Similar to me: Select the number of tests -# 10 changes: Select the new file -# translation: Válassza ki az új fájlt -msgid "Select the number of tests" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:39 -msgid "" -"Select the number of tests with higher temperature than the current one." -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:36 -msgid "Select the number of tests with lower temperature than the current one." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:49 -msgid "" -"Select the number tower to print, and by how many degrees C to decrease each " -"time." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6728 -msgid "Select the output format for this printer." -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:32 -msgid "" -"Select the step in % between two tests.\n" -"Note that only multiple of 5 are engraved on the parts." -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:32 -msgid "" -"Select the step in celcius between two tests.\n" -"Note that only multiple of 5 are engraved on the part." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4188 -msgid "" -"Select this option to enforce z-lift on the first layer.\n" -"Useful to still use the lift on the first layer even if the 'Only lift Z " -"below' (retract_lift_above) is higher than 0." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4198 -msgid "Select this option to not use/enforce the z-lift on a top surface." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5113 -msgid "" -"Set the new lift-z value for this override. 0 will disable the z-lift. -& to " -"disable. May only work on Height range modifiers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3466 -msgid "" -"Set this if your printer uses control values from 0-100 instead of 0-255." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1398 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.05 x nozzle diameter will be used. If expressed as percentage (for example 112.5%), it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. -# 150 changes: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%), it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, hogy a külső kerületekhez kézi extrudálási szélességet tudjon beállítani.\nHa nullán hagyja és van beállított alapértelmezett extrudálási szélesség, akkor az alapértelmezett értéket használja; ha nincs alapértelmezett érték beállítva, akkor a fúvóka átmérőjének 1,125-szörösét használja. Ha százalékban van megadva (például 200%), akkor a rétegmagasságra lesz kiszámítva. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for external " -"perimeters. If left zero, default extrusion width will be used if set, " -"otherwise 1.05 x nozzle diameter will be used. If expressed as percentage " -"(for example 112.5%), it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2395 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for first " -"layer. You can use this to force fatter extrudates for better adhesion. If " -"expressed as percentage (for example 140%) it will be computed over the " -"nozzle diameter of the nozzle used for the type of extrusion. If set to " -"zero, it will use the default extrusion width.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." + +#: ../../ui_layout/default/print.ui : l295 +msgid "Over raft" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4501 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left as zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height. -# 109 changes: Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a tömör felületek kitöltésének extrudálási szélességét manuálisan szeretné beállítani.\nHa nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, egyébként 1,125 x fúvókaátmérőt fogja használni. Ha százalékban van megadva (például 90%), akkor a rétegmagasságra lesz kiszámítva. -# 131 changes: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%), it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, hogy a külső kerületekhez kézi extrudálási szélességet tudjon beállítani.\nHa nullán hagyja és van beállított alapértelmezett extrudálási szélesség, akkor az alapértelmezett értéket használja; ha nincs alapértelmezett érték beállítva, akkor a fúvóka átmérőjének 1,125-szörösét használja. Ha százalékban van megadva (például 200%), akkor a rétegmagasságra lesz kiszámítva. -# 138 changes: Set this to a non-zero value to set a manual extrusion width for support material. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a támaszanyag extrudálási szélességet manuálisan szeretné beállítani.\nHa nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, különben a fúvóka átmérőjét fogja használni. Ha százalékban van megadva (például 90%), akkor a rétegmagasságra lesz kiszámítva. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"solid surfaces. If left as zero, default extrusion width will be used if " -"set, otherwise 1.125 x nozzle diameter will be used. If expressed as " -"percentage (for example 110%) it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." +#: src/libslic3r/PrintConfig.cpp:3679 +#Similar to me: Overhang acceleration +# 7 changes: Bridge acceleration +# translation: Híd gyorsulás +# 7 changes: Default acceleration +# translation: Alapértelmezett gyorsítás +# 7 changes: Travel acceleration +# translation: Utazás gyorsítása +msgid "Overhang acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5297 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If left as zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height. -# 109 changes: Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a felső felületek kitöltésének extrudálási szélességet manuálisan szeretné beállítani.\nÉrdemes vékonyabb extrudátumokat használni, hogy minden keskeny területet kitöltsön, és simább felületet kapjon. Ha nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, ellenkező esetben a fúvóka átmérőjét fogja használni.\nHa százalékban van megadva (például 90%), akkor a rétegmagasságra lesz kiszámítva. -# 173 changes: Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a kerületek extrudálási szélességét manuálisan szeretné beállítani.\nPontosabb felületek létrehozásához érdemes lehet vékonyabb extrudátumot használni. Ha nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, különben 1,125 x fúvókaátmérőt fogja használni. Ha százalékban van megadva (például 200%), akkor a rétegmagasságra lesz kiszámítva. +#: src/libslic3r/PrintConfig.cpp:5016 +#, possible-c-format, possible-boost-format msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"top surfaces. You may want to use thinner extrudates to fill all narrow " -"regions and get a smoother finish. If left as zero, default extrusion width " -"will be used if set, otherwise nozzle diameter will be used. If expressed as " -"percentage (for example 110%) it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." +"Pattern for interface layers.\n" +"Note that 'Hilbert', 'Ironing' and '(filled)' patterns are meant to be used " +"with soluble supports and 100% fill interface layer." msgstr "" +#: ../../ui_layout/default/print.ui +#Similar to me: perimeter +# 1 changes: perimeters +# translation: kerületek +# 1 changes: Perimeter +# translation: Kerület +# 2 changes: Perimeters +# translation: Kerületek +msgid "perimeter" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:2906 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for infill. If left as zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. You may want to use fatter extrudates to speed up the infill and make your parts stronger. If expressed as percentage (for example 110%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height. -# 109 changes: Set this to a non-zero value to set a manual extrusion width for infill. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. You may want to use fatter extrudates to speed up the infill and make your parts stronger. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a kitöltés extrudálási szélességét manuálisan szeretné beállítani.\nHa nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, különben 1,125 x fúvókaátmérőt fogja használni. Érdemes lehet szélesebb extrudátumot használni, hogy felgyorsítsa a kitöltést és erősebbé tegye az alkatrészeket. Ha százalékban van megadva (például 90%), akkor a rétegmagasságra lesz kiszámítva. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill. If " -"left as zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. You may want to use fatter extrudates to speed " -"up the infill and make your parts stronger. If expressed as percentage (for " -"example 110%) it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." +#: ../../ui_layout/default/print.ui : l144 +#Similar to me: Perimeter anchor +# 6 changes: Perimeter bonding +# translation: Kerületi kötés +# 6 changes: Perimeters loop +# translation: Kerületi hurok +# 6 changes: Perimeter width +# translation: Kerületi szélesség +msgid "Perimeter anchor" msgstr "" +#: ../../ui_layout/default/print.ui +#Similar to me: Perimeter speed +# 5 changes: Perimeters +# translation: Kerületek +# 5 changes: Perimeter width +# translation: Kerületi szélesség +# 5 changes: Perimeter spacing +# translation: Kerületi távolság +msgid "Perimeter speed" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:3819 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 105%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. -# 146 changes: Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a kerületek extrudálási szélességét manuálisan szeretné beállítani.\nPontosabb felületek létrehozásához érdemes lehet vékonyabb extrudátumot használni. Ha nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, különben 1,125 x fúvókaátmérőt fogja használni. Ha százalékban van megadva (például 200%), akkor a rétegmagasságra lesz kiszámítva. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for perimeters. " -"You may want to use thinner extrudates to get more accurate surfaces. If " -"left zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. If expressed as percentage (for example 105%) " -"it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." +#: ../../ui_layout/default/print.ui +#Similar to me: Perimeters & Shell +# 7 changes: Perimeters loop +# translation: Kerületi hurok +# 7 changes: Perimeters count +# translation: Peremek száma +msgid "Perimeters & Shell" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4872 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for support material. If left as zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter. -# 18 changes: Set this to a non-zero value to set a manual extrusion width for support material. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a támaszanyag extrudálási szélességet manuálisan szeretné beállítani.\nHa nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, különben a fúvóka átmérőjét fogja használni. Ha százalékban van megadva (például 90%), akkor a rétegmagasságra lesz kiszámítva. -# 43 changes: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%), it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, hogy a külső kerületekhez kézi extrudálási szélességet tudjon beállítani.\nHa nullán hagyja és van beállított alapértelmezett extrudálási szélesség, akkor az alapértelmezett értéket használja; ha nincs alapértelmezett érték beállítva, akkor a fúvóka átmérőjének 1,125-szörösét használja. Ha százalékban van megadva (például 200%), akkor a rétegmagasságra lesz kiszámítva. -# 47 changes: Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Állítsa be ezt nem nulla értékre, ha a tömör felületek kitöltésének extrudálási szélességét manuálisan szeretné beállítani.\nHa nullán hagyja, akkor az alapértelmezett extrudálási szélességet fogja használni, amennyiben az be van állítva, egyébként 1,125 x fúvókaátmérőt fogja használni. Ha százalékban van megadva (például 90%), akkor a rétegmagasságra lesz kiszámítva. +#: src/libslic3r/PrintConfig.cpp:2547 +#, possible-c-format, possible-boost-format +#Similar to me: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall.\nCan be a % of the nozzle diameter. +# 36 changes: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall. +# translation: A kerületeket a Fuzzy bőr pontok beillesztésével több szegmensre osztjuk. A Fuzzy bőr pontok távolságának csökkentése növeli a véletlenszerűen eltolt pontok számát a kerületi falon. msgid "" -"Set this to a non-zero value to set a manual extrusion width for support " -"material. If left as zero, default extrusion width will be used if set, " -"otherwise nozzle diameter will be used. If expressed as percentage (for " -"example 110%) it will be computed over nozzle diameter." +"Perimeters will be split into multiple segments by inserting Fuzzy skin " +"points. Lowering the Fuzzy skin point distance will increase the number of " +"randomly offset points on the perimeter wall.\n" +"Can be a % of the nozzle diameter." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1614 -#Similar to me: Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the platter.\nSet zero to disable clearance checking. -# 42 changes: Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the plater. -# translation: Állítsa be ezt az extruder körüli védőhenger sugarának nagyságára. Ha a fúvókacsúcs nincs középen, akkor a biztonság kedvéért válassza a legnagyobb értéket. Ez a beállítás az ütközések ellenőrzésére és a tárgyasztal grafikus előnézetének megjelenítésére szolgál. -msgid "" -"Set this to the clearance radius around your extruder. If the extruder is " -"not centered, choose the largest value for safety. This setting is used to " -"check for collisions and to display the graphical preview in the platter.\n" -"Set zero to disable clearance checking." +#: src/slic3r/GUI/Preferences.cpp:795 +msgid "Platter icons Color template" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5761 +#: src/libslic3r/PrintConfig.cpp:4273 msgid "" -"Set this to the height moved when your Z motor (or equivalent) turns one " -"step.If your motor needs 200 steps to move your head/platter by 1mm, this " -"field should be 1/200 = 0.005.\n" -"Note that the gcode will write the z values with 6 digits after the dot if " -"z_step is set (it's 3 digits if it's disabled).\n" -"Set zero to disable." +"Position of perimeters' starting points.\n" +"Cost-based option let you choose the angle and travel cost. A high angle " +"cost will place the seam where it can be hidden by a corner, the travel cost " +"place the seam near the last position (often at the end of the previous " +"infill)." msgstr "" - -#: src/slic3r/GUI/Preferences.cpp:1130 -msgid "" -"Settings button: all windows are in the application, no tabs: you have to " -"clic on settings gears to switch to settings tabs." +#: ../../ui_layout/default/print.ui : l72 +msgid "Position of perimeters' starting points.\nCustom can be defined in Advanced or Expert mode. Cost-based settings let you choose the angle and travel cost. A high angle cost will place the seam where it can be hidden by a corner, the travel cost place the seam near the last position (often at the end of the previous infill)." msgstr "" +#: ../../ui_layout/default/print.ui +#Similar to me: Post-processing milling +# 7 changes: Post-processing scripts +# translation: Szkriptek utófeldolgozása +msgid "Post-processing milling" +msgstr "" -#: src/slic3r/GUI/Preferences.cpp:686 -msgid "Settings layout and colors" +#: ../../ui_layout/default/print.ui +#Similar to me: Post-processing script +# 1 changes: Post-processing scripts +# translation: Szkriptek utófeldolgozása +msgid "Post-processing script" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:1131 -msgid "" -"Settings window: settings are displayed in their own window. You have to " -"clic on settings gears to show the settings window." +#: src/libslic3r/PrintConfig.cpp:5789 +#Similar to me: Preferred orientation +# 8 changes: Optimize orientation +# translation: Tájolás optimalizálása +msgid "Preferred orientation" msgstr "" - -#: src/slic3r/GUI/ConfigManipulation.cpp:227 -msgid "Shall I switch the brim offset to 0?" +#: ../../ui_layout/default/printer_fff.ui +#Similar to me: Print remaining times +# 7 changes: Supports remaining times +# translation: Támogatja a hátralévő időket +# 8 changes: Remaining time +# translation: Hátralévő idő +# 8 changes: Remaining time: +# translation: A hátralevő idő : +msgid "Print remaining times" msgstr "" -#: ../../ui_layout/default/filament.ui -msgid "Short layer time - began to increase base fan speed" +#: ../../ui_layout/default/printer_fff.ui +#Similar to me: Processing limit +# 5 changes: Processing %s +# translation: Feldolgozás %s +msgid "Processing limit" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:313 -msgid "Show overwrite dialog." +#: src/libslic3r/PrintConfig.cpp:4036 +#Similar to me: Raft first layer density +# 6 changes: First layer density +# translation: Első réteg sűrűsége +msgid "Raft first layer density" msgstr "" -#: src/libslic3r/PrintConfig.cpp:400 -msgid "Show the bed texture on the thumbnail picture." +#: src/libslic3r/PrintConfig.cpp:4047 +#Similar to me: Raft first layer expansion +# 6 changes: First layer expansion +# translation: Első réteg túlnyúlása +msgid "Raft first layer expansion" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:1873 -msgid "Show the editor of the input models" +#: ../../ui_layout/default/extruder.ui +#Similar to me: Retraction wipe +# 4 changes: Retraction Speed +# translation: Visszahúzási sebesség +# 5 changes: Retraction +# translation: Visszahúzás +# 5 changes: Retractions +# translation: Visszahúzások +msgid "Retraction wipe" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1876 -msgid "Show the layers from the slicing process" +#: src/libslic3r/PrintConfig.cpp:5791 +msgid "Rotate stl around z axes while adding them to the bed." msgstr "" +#: ../../ui_layout/default/filament.ui : l31 +msgid "Run the fan at default speed when possible" +msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1879 -msgid "Show the preview of the gcode output" +#: ../../ui_layout/default/print.ui +#Similar to me: Seam +# 1 changes: Seams +# translation: Varratok +msgid "Seam" msgstr "" -#: src/libslic3r/PrintConfig.cpp:421 -msgid "Show the supports (and pads) on the thumbnail picture." +#: src/slic3r/GUI/GUI_Preview.cpp:257 +#Similar to me: Section +# 1 changes: Sections +# translation: Szakaszok +# 2 changes: Action +# translation: Akció +# 2 changes: Selection +# translation: Kiválasztott +msgid "Section" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2061 -msgid "Shrinkage" +#: src/slic3r/GUI/Preferences.cpp:646 +msgid "Settings layout and colors" +msgstr "" + +#: ../../ui_layout/default/filament.ui +msgid "Short layer time - began to increase base fan speed" msgstr "" #: ../../ui_layout/default/print.ui : l56 msgid "Simple widget to enable/disable the overhangs detection (using 55% and 75% for the two thresholds)\nUse the expert mode to get more detailled widgets" msgstr "" -#: ../../ui_layout/default/print.ui : l391 +#: ../../ui_layout/default/print.ui : l393 msgid "Simulate Prusa 'no thick bridge'" msgstr "" @@ -6093,15 +1801,13 @@ msgid "Size for Gcode" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:640 -msgid "Size of the tab icons, in pixels. Set to 0 to remove icons." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1885 +#: src/slic3r/GUI/Preferences.cpp:592 +#, possible-c-format, possible-boost-format msgid "" -"Skinnydip performs a secondary dip into the meltzone to burn off fine " -"strings of filament" +"Size of the font, and most of the gui (but not the menu and dialog ones). " +"Set to 0 to let the Operating System decide.\n" +"Please don't set this preference unless your OS scaling factor doesn't " +"works. Set 10 for 100% scaling, and 20 for 200% scaling." msgstr "" #: ../../ui_layout/default/print.ui @@ -6115,6 +1821,8 @@ msgstr "" #: ../../ui_layout/default/print.ui #Similar to me: Skirt & Brim +# 3 changes: Skirt brim +# translation: Szoknya perem # 3 changes: Skirt/Brim # translation: Szoknya/Karima # 4 changes: Skirt and brim @@ -6123,38 +1831,21 @@ msgid "Skirt & Brim" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4329 -#Similar to me: Skirt brim -# 2 changes: Skirt/Brim -# translation: Szoknya/Karima -# 4 changes: Skirt and brim -# translation: Szoknya és karima -msgid "Skirt brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4347 -msgid "Skirt distance from brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4364 -#Similar to me: Skirt width -# 4 changes: Brim width -# translation: Karima szélesség -msgid "Skirt width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6738 +#: src/libslic3r/PrintConfig.cpp:6754 msgid "SLA output precision" msgstr "" -#: src/slic3r/GUI/AboutDialog.cpp:276 src/slic3r/GUI/GUI_App.cpp:283 +#: src/libslic3r/PrintConfig.cpp:3581 +#Similar to me: Slic3r can upload G-code files to a printer host. This field must contain the kind of the host.\nPrusaLink is only available for prusa printer. +# 48 changes: Slic3r can upload G-code files to a printer host. This field must contain the kind of the host. +# translation: A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek tartalmaznia kell a gazdagép típusát. +# 55 changes: Slic3r can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication. +# translation: A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek tartalmaznia kell az API-kulcsot vagy a hitelesítéshez szükséges jelszót. msgid "" -"Slic3r contains sizable contributions from Prusa Research. Original work by " -"Alessandro Ranellucci and the RepRap community." +"Slic3r can upload G-code files to a printer host. This field must contain " +"the kind of the host.\n" +"PrusaLink is only available for prusa printer." msgstr "" @@ -6171,196 +1862,121 @@ msgid "Slic3r has encountered an error while taking a configuration snapshot." msgstr "" -#: src/slic3r/GUI/AboutDialog.cpp:279 -msgid "Slic3r logo designed by Corey Daniels." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1569 -msgid "Slic3r Manual" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3514 -#Similar to me: Slic3r will never scale the speed below this one. -# 17 changes: Slic3r will not scale speed down below this speed. -# translation: A Slic3r nem csökkenti a sebességet ez alá. -msgid "Slic3r will never scale the speed below this one." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:808 +#: src/slic3r/GUI/Preferences.cpp:827 +#Similar to me: Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): 275cad +# 11 changes: Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): 2172eb +# translation: Slic3r(sárga): cabe39, PrusaSlicer(narancs): ed6b21, SuperSlicer(kék): 2172eb +# 15 changes: Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): 428dfd +# translation: Slic3r(sárga): eddc21, PrusaSlicer(narancs): fd7e42, SuperSlicer(kék): 428dfd +# 16 changes: Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): 0047c7 +# translation: Slic3r(sárga): ada230, PrusaSlicer(narancs): c46737, SuperSlicer(kék): 0047c7 msgid "" "Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " "275cad" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:794 +#: src/slic3r/GUI/Preferences.cpp:813 +#Similar to me: Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): 296acc +# 11 changes: Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): 2172eb +# translation: Slic3r(sárga): cabe39, PrusaSlicer(narancs): ed6b21, SuperSlicer(kék): 2172eb +# 15 changes: Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): 0047c7 +# translation: Slic3r(sárga): ada230, PrusaSlicer(narancs): c46737, SuperSlicer(kék): 0047c7 +# 16 changes: Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): 428dfd +# translation: Slic3r(sárga): eddc21, PrusaSlicer(narancs): fd7e42, SuperSlicer(kék): 428dfd msgid "" "Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " "296acc" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:780 +#: src/slic3r/GUI/Preferences.cpp:799 +#Similar to me: Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): 3d83ed +# 11 changes: Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): 2172eb +# translation: Slic3r(sárga): cabe39, PrusaSlicer(narancs): ed6b21, SuperSlicer(kék): 2172eb +# 14 changes: Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): 428dfd +# translation: Slic3r(sárga): eddc21, PrusaSlicer(narancs): fd7e42, SuperSlicer(kék): 428dfd +# 16 changes: Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): 0047c7 +# translation: Slic3r(sárga): ada230, PrusaSlicer(narancs): c46737, SuperSlicer(kék): 0047c7 msgid "" "Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " "3d83ed" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:361 src/slic3r/GUI/MainFrame.cpp:464 -#: src/slic3r/GUI/MainFrame.cpp:672 src/slic3r/GUI/MainFrame.cpp:715 -#Similar to me: Sliced preview -# 5 changes: G-code preview -# translation: G-kód előnézet -msgid "Sliced preview" -msgstr "" - #: ../../ui_layout/default/printer_fff.ui : l44 #Similar to me: Small # 2 changes: Scale -# translation: Skálázás +# translation: Skála msgid "Small" msgstr "" #: ../../ui_layout/default/print.ui #Similar to me: Small perimeter speed +# 1 changes: Small perimeters speed +# translation: Kis kerületi sebesség # 5 changes: Small perimeters # translation: Kicsi kerületek +# 8 changes: External perimeters speed +# translation: Külső kerületi sebesség msgid "Small perimeter speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4418 -#Similar to me: Small perimeters speed -# 6 changes: Small perimeters -# translation: Kicsi kerületek -msgid "Small perimeters speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4682 +#: src/libslic3r/PrintConfig.cpp:4698 #Similar to me: Solid acceleration -# 7 changes: Maximum accelerations -# translation: Maximum gyorsulások +# 5 changes: Bridge acceleration +# translation: Híd gyorsulás +# 5 changes: Infill acceleration +# translation: Kitöltési gyorsulás +# 6 changes: Travel acceleration +# translation: Utazás gyorsítása msgid "Solid acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4467 +#: src/libslic3r/PrintConfig.cpp:4483 #Similar to me: Solid fill overlap +# 5 changes: Gap fill overlap +# translation: Hézagkitöltés átfedés # 6 changes: Solid infill every # translation: Tömör kitöltés minden +# 6 changes: Thin wall overlap +# translation: Vékony fal átfedés msgid "Solid fill overlap" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1331 +#: src/libslic3r/PrintConfig.cpp:1332 #Similar to me: Solid fill pattern # 4 changes: Top fill pattern # translation: Felső kitöltés mintázata # 5 changes: Bottom fill pattern -# translation: Alsó kitöltés mintázata -# 7 changes: Solid infill every -# translation: Tömör kitöltés minden +# translation: Alsó kitöltési minta +# 5 changes: Solid pattern +# translation: Szilárd minta msgid "Solid fill pattern" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4517 -#Similar to me: Solid infill spacing -# 7 changes: Solid infill every -# translation: Tömör kitöltés minden -# 8 changes: Solid infill -# translation: Tömör kitöltés -# 8 changes: Solid infill extruder -# translation: Tömör kitöltés extruder -msgid "Solid infill spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4533 -#Similar to me: Solid infill speed -# 4 changes: Solid infill every -# translation: Tömör kitöltés minden -# 6 changes: Solid infill -# translation: Tömör kitöltés -# 7 changes: solid infill -# translation: tömör kitöltés -msgid "Solid infill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4499 -#Similar to me: Solid infill width -# 5 changes: Solid infill every -# translation: Tömör kitöltés minden -# 6 changes: Solid infill -# translation: Tömör kitöltés -# 7 changes: solid infill -# translation: tömör kitöltés -msgid "Solid infill width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4516 -msgid "Solid spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2644 -#Similar to me: Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents Slic3r from exporting any extrusion value at all. -# 6 changes: Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any extrusion value at all. -# translation: Egyes G/M-kódok, köztük a hőmérséklet-szabályozás és mások, nem univerzálisak. Állítsa be ezt az opciót a nyomtató firmware-ével a kompatibilis kimenet érdekében. A \"Nincs extrudálás\" változat megakadályozza, hogy a PrusaSlicer egyáltalán bármilyen extrudálási értéket exportáljon. -msgid "" -"Some G/M-code commands, including temperature control and others, are not " -"universal. Set this option to your printer's firmware to get a compatible " -"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " -"extrusion value at all." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:463 +#: src/slic3r/GUI/Preferences.cpp:718 msgid "" "Some software like (for example) ASUS Sonic Studio injects a DLL (library) " "that is known to create some instabilities. This option let Slic3r check at " "startup if they are loaded." msgstr "" -#: ../../ui_layout/default/print.ui : l337 +#: ../../ui_layout/default/print.ui : l339 #Similar to me: spacing # 1 changes: Spacing -# translation: Térköz +# translation: Távolság msgid "spacing" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3069 -#Similar to me: Spacing between ironing lines -# 4 changes: Spacing between ironing passes -# translation: Térköz a vasalási ismétlések között -# 7 changes: Distance between ironing lines -# translation: Távolság a vasalási vonalak között -msgid "Spacing between ironing lines" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2719 src/libslic3r/PrintConfig.cpp:2968 -#Similar to me: Sparse -# 2 changes: Stars -# translation: Csillagok -# 2 changes: Space -# translation: Keresek... -msgid "Sparse" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2232 +#: src/libslic3r/PrintConfig.cpp:2233 #Similar to me: Sparse fill pattern # 6 changes: Bottom fill pattern -# translation: Alsó kitöltés mintázata +# translation: Alsó kitöltési minta # 6 changes: Top fill pattern # translation: Felső kitöltés mintázata msgid "Sparse fill pattern" @@ -6368,20 +1984,20 @@ msgstr "" #: ../../ui_layout/default/print.ui #Similar to me: Sparse infill pattern +# 6 changes: Sparse infill speed +# translation: Ritkás kitöltési sebesség # 8 changes: Bottom fill pattern -# translation: Alsó kitöltés mintázata -# 8 changes: Top fill pattern -# translation: Felső kitöltés mintázata +# translation: Alsó kitöltési minta +# 8 changes: Dense infill layer +# translation: Sűrű kitöltő réteg msgid "Sparse infill pattern" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2969 -msgid "Sparse infill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2613 +#: src/libslic3r/PrintConfig.cpp:2626 +#Similar to me: Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues.\nGap fill extrusions are ignored from the automatic volumetric speed computation, unless you set it to 0.\nThis can be expressed as a percentage (for example: 80%) over the Internal Perimeter speed. +# 93 changes: Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues.\nGap fill extrusions are ignored from the automatic volumetric speed computation, unless you set it to 0. +# translation: Gyorsaság a kis rések kitöltéséhez rövid cikk-cakkos mozdulatokkal. Tartsa ezt ésszerűen alacsonyan, hogy elkerülje a túl sok rázkódást és a rezonanciaproblémákat.\nA hézagkitöltő kitolásokat az automatikus térfogatsebesség-számítás figyelmen kívül hagyja, hacsak nem állítja 0-ra. msgid "" "Speed for filling small gaps using short zigzag moves. Keep this reasonably " "low to avoid too much shaking and resonance issues.\n" @@ -6392,15 +2008,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:6004 -#Similar to me: Speed for milling tool. -# 9 changes: Speed for print moves -# translation: Sebesség nyomtatási mozgásokhoz -msgid "Speed for milling tool." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3902 +#: src/libslic3r/PrintConfig.cpp:3918 msgid "" "Speed for perimeters (contours, aka vertical shells).\n" "This can be expressed as a percentage (for example: 80%) over the Default " @@ -6409,7 +2017,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:800 +#: src/libslic3r/PrintConfig.cpp:801 msgid "" "Speed for printing bridges.\n" "This can be expressed as a percentage (for example: 60%) over the Default " @@ -6418,7 +2026,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3679 +#: src/libslic3r/PrintConfig.cpp:3695 #, possible-c-format, possible-boost-format msgid "" "Speed for printing overhangs.\n" @@ -6427,8 +2035,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4535 +#: src/libslic3r/PrintConfig.cpp:4551 #Similar to me: Speed for printing solid regions (top/bottom/internal horizontal shells). \nThis can be expressed as a percentage (for example: 80%) over the Default speed.\nSet zero to use autospeed for this feature. +# 39 changes: Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed. Set zero for auto. +# translation: Sebesség a tömör régiók nyomtatásához (felső/alsó/belső vízszintes héjak). Ez az alapértelmezett kitöltési sebességhez képest százalékban (például: 80%) fejezhető ki. Az automatikus értéket nullára állítsa be. # 39 changes: Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed above. Set to zero for auto. # translation: Sebesség a tömör régiók nyomtatásához (felső/alsó/belső vízszintes héjak). Ez a fenti alapértelmezett Kitöltés sebességéhez képest százalékban (például: 80%) adható meg. Állítsa nullára az automatikus beállításhoz. msgid "" @@ -6439,10 +2049,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4972 +#: src/libslic3r/PrintConfig.cpp:4988 #Similar to me: Speed for printing support material interface layers.\nIf expressed as percentage (for example 50%) it will be calculated over support material speed.\nSet zero to use autospeed for this feature. # 47 changes: Speed for printing support material interface layers. If expressed as percentage (for example 50%) it will be calculated over support material speed. -# translation: Sebesség a támasztó interfész rétegeinek nyomtatásához. Ha százalékban van megadva (például 50%), akkor a sebességet a támasztó nyomtatási sebességére kell számítani. +# translation: Sebesség a hordozóanyag-felületi rétegek nyomtatásához. Ha százalékban van megadva (például 50%), akkor a sebességet a hordozóanyag sebességére kell számítani. msgid "" "Speed for printing support material interface layers.\n" "If expressed as percentage (for example 50%) it will be calculated over " @@ -6451,7 +2061,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5035 +#: src/libslic3r/PrintConfig.cpp:5051 msgid "" "Speed for printing support material.\n" "This can be expressed as a percentage (for example: 80%) over the Default " @@ -6460,15 +2070,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:814 -#, possible-c-format, possible-boost-format -msgid "" -"Speed for printing the bridges that support the top layer.\n" -"Can be a % of the bridge speed." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2971 +#: src/libslic3r/PrintConfig.cpp:2984 msgid "" "Speed for printing the internal fill.\n" "This can be expressed as a percentage (for example: 80%) over the Solid " @@ -6477,10 +2079,12 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5345 +#: src/libslic3r/PrintConfig.cpp:5361 #Similar to me: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish.\nThis can be expressed as a percentage (for example: 80%) over the Solid Infill speed.\nSet zero to use autospeed for this feature. # 34 changes: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set to zero for auto. # translation: Sebesség a felső tömör rétegek nyomtatásához (csak a legfelső külső rétegekre vonatkozik, a belső szilárd rétegekre nem). Ezt érdemes lassítani, hogy szebb felületet kapjon. Ez a fenti Tömör kitöltési sebességhez képest százalékban (például: 80%) is kifejezhető. Állítsa nullára az automatikus beállításhoz. +# 36 changes: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set zero for auto. +# translation: Sebesség a felső tömör rétegek nyomtatásához (csak a legfelső külső rétegekre vonatkozik, a belső tömör rétegekre nem). Ezt érdemes lassítani, hogy szebb felületet kapjon. Ez a fenti tömör kitöltési sebességhez képest százalékban (például: 80%) is kifejezhető. Állítsa be a nullát az automatikus beállításhoz. msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " @@ -6491,7 +2095,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5201 +#: src/libslic3r/PrintConfig.cpp:5217 msgid "" "Speed for thin walls (external extrusions that are alone because the obect " "is too thin at these places).\n" @@ -6500,235 +2104,77 @@ msgid "" "Set zero to use autospeed for this feature." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5512 -msgid "" -"Speed in mm/s of the wipe. If it's faster, it will try to go further away, " -"as the wipe time is set by ( 100% - 'retract before wipe') * 'retaction " -"length' / 'retraction speed'.\n" -"If set to zero, the travel speed is used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1918 -msgid "Speed to extract from melt zone" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1909 -msgid "Speed to move into melt zone" -msgstr "" - #: ../../ui_layout/default/printer_fff.ui msgid "Speedup time" msgstr "" - -#: src/slic3r/GUI/Preferences.cpp:405 -#Similar to me: Splash screen -# 5 changes: Show splash screen -# translation: Splash screen meglenítése -msgid "Splash screen" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:418 -msgid "Splash screen image" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:47 -#Similar to me: Standard Cube -# 5 changes: Standard -# translation: Standard -msgid "Standard Cube" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:49 -msgid "" -"Standard cubic xyz cube, with a flat top. Better for infill/perimeter " -"overlap calibration." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:60 -msgid "Start temp:" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1892 -msgid "" -"Stay in melt zone for this amount of time before extracting the filament. " -"Not usually necessary." -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:39 -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:53 -#Similar to me: Step: -# 2 changes: Stop -# translation: &Leállítás -msgid "Step:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:48 -msgid "Steps:" -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: Support & Other # 5 changes: Support Blocker -# translation: Támasz Blokkoló -# 6 changes: Support Enforcer -# translation: Támasz Kényszerítő -# 6 changes: Support head -# translation: Támasztó fej -msgid "Support & Other" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4723 -#Similar to me: Support acceleration -# 6 changes: Support Generator -# translation: Támasz generátor -# 8 changes: Maximum accelerations -# translation: Maximum gyorsulások -msgid "Support acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4790 -msgid "Support contact distance type" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4745 -msgid "Support interface acceleration" +# translation: Támaszték blokkoló +# 5 changes: Support pattern +# translation: Támaszték minta +# 6 changes: Support Enforcer +# translation: Támaszték végrehajtó +msgid "Support & Other" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4885 -msgid "Support interface fan speed" +#: src/libslic3r/PrintConfig.cpp:4739 +#Similar to me: Support acceleration +# 6 changes: Support Generator +# translation: Alátámasztási generátor +# 6 changes: Default acceleration +# translation: Alapértelmezett gyorsítás +# 7 changes: Bridge acceleration +# translation: Híd gyorsulás +msgid "Support acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4998 -#Similar to me: Support interface pattern -# 9 changes: support interface -# translation: támasz felület -# 9 changes: Interface pattern -# translation: Interfész mintázat -# 10 changes: Bottom interface layers -# translation: Alsó interfész rétegek -msgid "Support interface pattern" +#: src/libslic3r/PrintConfig.cpp:4761 +#Similar to me: Support interface acceleration +# 9 changes: Support interface pattern +# translation: Támogatási interfész minta +# 10 changes: Support interface speed +# translation: Támogatási interfész sebesség +msgid "Support interface acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4970 -#Similar to me: Support interface speed -# 7 changes: support interface -# translation: támasz felület -msgid "Support interface speed" +#: src/libslic3r/PrintConfig.cpp:4901 +#Similar to me: Support interface fan speed +# 4 changes: Support interface speed +# translation: Támogatási interfész sebesség +# 7 changes: Support interface pattern +# translation: Támogatási interfész minta +msgid "Support interface fan speed" msgstr "" #: ../../ui_layout/default/print.ui #Similar to me: support material # 1 changes: Support material -# translation: Támaszanyag +# translation: Alátámasztás # 5 changes: support interface -# translation: támasz felület +# translation: támasztó felület +# 6 changes: Support pattern +# translation: Támaszték minta msgid "support material" msgstr "" #: ../../ui_layout/default/print.ui #Similar to me: Support Material # 1 changes: Support material -# translation: Támaszanyag -# 6 changes: Support head -# translation: Támasztó fej +# translation: Alátámasztás +# 5 changes: Support pattern +# translation: Támaszték minta # 6 changes: support interface -# translation: támasz felület +# translation: támasztó felület msgid "Support Material" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4860 -#Similar to me: Support material extruder -# 7 changes: Support material interface -# translation: Támaszanyag interfész -# 9 changes: Support material -# translation: Támaszanyag -# 10 changes: Support base diameter -# translation: A támasztó alapjának átmérője -msgid "Support material extruder" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4870 -#Similar to me: Support material width -# 6 changes: Support material -# translation: Támaszanyag -# 8 changes: Support material interface -# translation: Támaszanyag interfész -msgid "Support material width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5070 -#Similar to me: Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set zero for automatic detection (recommended). -# 3 changes: Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set to zero for automatic detection (recommended). -# translation: NEM generálódik támaszanyag olyan túlnyúlásokhoz, amelyek meredeksége (90° = függőleges) meghaladja a megadott küszöbértéket. Más szóval, ez az érték jelenti a legnagyobb vízszintes dőlést (a vízszintes síkból mérve), amelyet még támaszanyag NÉLKÜL nyomtathat. Automatikus felismeréshez állítsa nullára (ajánlott). -msgid "" -"Support material will not be generated for overhangs whose slope angle (90° " -"= vertical) is above the given threshold. In other words, this value " -"represent the most horizontal slope (measured from the horizontal plane) " -"that you can print without support material. Set zero for automatic " -"detection (recommended)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:420 -msgid "Support on thumbnail" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4983 -#Similar to me: Support pattern -# 5 changes: Support material -# translation: Támaszanyag -# 5 changes: Support pillar -# translation: Támasztó pillér -# 6 changes: Support Blocker -# translation: Támasz Blokkoló -msgid "Support pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4772 -#Similar to me: Support pattern angle -# 7 changes: Support material -# translation: Támaszanyag -# 8 changes: Support parameter change -# translation: Támaszték paraméter változtatása -msgid "Support pattern angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5033 -#Similar to me: Support speed -# 3 changes: Support head -# translation: Támasztó fej -# 5 changes: Support Cubic -# translation: Támasztó Kocka -# 5 changes: Supports -# translation: Támasztékok -msgid "Support speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5046 +#: src/libslic3r/PrintConfig.cpp:5062 msgid "Support tower style" msgstr "" @@ -6737,116 +2183,36 @@ msgid "Supporting dense layer" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3134 -#Similar to me: Supports remaining times method -# 7 changes: Supports remaining times -# translation: Hátralévő idő támogatása -msgid "Supports remaining times method" -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:247 -#Similar to me: Supports work better, if the following feature is enabled:\n- overhangs with bridge speed & fan -# 24 changes: Supports work better, if the following feature is enabled:\n- Detect bridging perimeters -# translation: A támaszok jobban működnek, ha a következő funkció engedélyezve van:\n- Az áthidaló kerületek felismerése -msgid "" -"Supports work better, if the following feature is enabled:\n" -"- overhangs with bridge speed & fan" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:164 -msgid "Switch between Tab" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:200 -msgid "Switch to Preview when sliced" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:207 -msgid "Switch when possible" -msgstr "" - - -#: src/slic3r/GUI/GUI_App.cpp:2610 -#Similar to me: Switching the language will trigger application restart.\nYou will lose content of the platter. -# 1 changes: Switching the language will trigger application restart.\nYou will lose content of the plater. -# translation: A nyelv megváltoztatása újraindítja az alkalmazást.\nElveszíti a tárgyasztal tartalmát. -# 22 changes: Changing some options will trigger application restart.\nYou will lose the content of the plater. -# translation: Egyes beállítások megváltoztatása az alkalmazás újraindítását eredményezi. \nA tárgyasztal tartalmát elveszíti. -msgid "" -"Switching the language will trigger application restart.\n" -"You will lose content of the platter." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:638 -msgid "Tab icon size" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1117 +#: src/slic3r/GUI/Preferences.cpp:1136 #Similar to me: Tab layout Options # 5 changes: Layout Options -# translation: Elrendezési lehetőségek +# translation: Elrendezési opciók msgid "Tab layout Options" msgstr "" -#: src/slic3r/GUI/GUI_Preview.cpp:252 -msgid "Temp" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:63 -msgid "Temp decr:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:60 -#Similar to me: Temperature calibration -# 4 changes: Temperature variation -# translation: Hőmérséklet-változás -msgid "Temperature calibration" +#: src/slic3r/GUI/Search.cpp:375 src/slic3r/GUI/Search.cpp:434 +msgid "tags" msgstr "" #: ../../ui_layout/default/filament.ui #Similar to me: Temperature °C # 2 changes: Temperature (°C) # translation: Hőmérséklet (°C) -# 3 changes: Temperature -# translation: Hőmérséklet # 3 changes: Temperatures -# translation: Hőmérséklet(ek) +# translation: Hőmérsékletek +# 3 changes: Temperature +# translation: Hőfok msgid "Temperature °C" msgstr "" -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:45 -msgid "Test Flow Ratio" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:804 +#: src/slic3r/GUI/Preferences.cpp:823 msgid "Text color template" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5698 -msgid "" -"The convex holes will be grown / shrunk in the XY plane by the configured " -"value (negative = inwards, positive = outwards, should be negative as the " -"holes are always a bit smaller irl). This might be useful for fine-tuning " -"hole sizes.\n" -"This setting behaves the same as 'Inner XY size compensation' but only for " -"convex shapes. It's added to 'Inner XY size compensation', it does not " -"replace it. " -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:2627 +#: src/slic3r/GUI/Plater.cpp:2648 #, possible-boost-format #Similar to me: The dimensions of the object from file %1% seem to be defined in inches.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of the object?" msgid_plural "The dimensions of some objects from file %1% seem to be defined in inches.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of these objects? @@ -6868,7 +2234,7 @@ msgstr[0] "" msgstr[1] "" -#: src/slic3r/GUI/Plater.cpp:2605 +#: src/slic3r/GUI/Plater.cpp:2626 #, possible-boost-format #Similar to me: The dimensions of the object from file %1% seem to be defined in meters.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of the object?" msgid_plural "The dimensions of some objects from file %1% seem to be defined in meters.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of these objects? @@ -6890,30 +2256,6 @@ msgstr[0] "" msgstr[1] "" -#: src/libslic3r/PrintConfig.cpp:4349 -msgid "The distance is computed from the brim and not from the objects" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1584 -msgid "" -"The extruder to use (unless more specific extruder settings are specified) " -"for the first layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4862 -#Similar to me: The extruder to use when printing support material (1+, 0 to use the current extruder to minimize tool changes). -# 16 changes: The extruder to use when printing support material, raft and skirt (1+, 0 to use the current extruder to minimize tool changes). -# translation: A támaszanyag, a tutaj és a szoknya nyomtatásához hasznát extruder (1+, 0 az éppen aktuális extruder használatához a szerszámváltások minimalizálása érdekében). -# 33 changes: The extruder to use when printing support material interface (1+, 0 to use the current extruder to minimize tool changes). This affects raft too. -# translation: A támaszanyag interfész nyomtatásához használt extruder (1+, 0 az éppen aktuális extruder használatához a szerszámváltások minimalizálása érdekében). Ez hatással van a tutajra is. -msgid "" -"The extruder to use when printing support material (1+, 0 to use the current " -"extruder to minimize tool changes)." -msgstr "" - - #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:187 #Similar to me: The file does not exist. # 4 changes: : file does not exist! @@ -6924,46 +2266,7 @@ msgid "The file does not exist." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2306 -#Similar to me: The first layer will be grown / shrunk in the XY plane by the configured value to compensate for the 1st layer squish aka an Elephant Foot effect. (should be negative = inwards) -# 39 changes: The first layer will be shrunk in the XY plane by the configured value to compensate for the 1st layer squish aka an Elephant Foot effect. -# translation: Az első réteg a beállított értékkel zsugorításra kerül az XY síkban, hogy kompenzálja az 1. réteg összenyomódását, azaz az Elefántláb-effektust. -msgid "" -"The first layer will be grown / shrunk in the XY plane by the configured " -"value to compensate for the 1st layer squish aka an Elephant Foot effect. " -"(should be negative = inwards)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:885 -msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" -msgstr "" - - -#: src/slic3r/GUI/Field.cpp:452 -msgid "" -"The infill / perimeter encroachment can't be higher than half of the " -"perimeter width.\n" -"Are you sure to use this value?" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:585 -#Similar to me: The maximum detour length for avoid crossing perimeters. If the detour is longer than this value, avoid crossing perimeters is not applied for this travel path. Detour length can be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. -# 4 changes: The maximum detour length for avoid crossing perimeters. If the detour is longer than this value, avoid crossing perimeters is not applied for this travel path. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. -# translation: A kerülőút maximális hossza a kerületek keresztezésének elkerülése érdekében. Ha a kerülőút hosszabb lenne ennél az értéknél, akkor az adott kerülőút nem kerül alkalmazásra ennél az utazási pályánál. A kerülőút hossza megadható abszolút értékként vagy az adott útvonal százalékában (például 50%). -msgid "" -"The maximum detour length for avoid crossing perimeters. If the detour is " -"longer than this value, avoid crossing perimeters is not applied for this " -"travel path. Detour length can be specified either as an absolute value or " -"as percentage (for example 50%) of a direct travel path." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2535 +#: src/libslic3r/PrintConfig.cpp:2536 #, possible-c-format, possible-boost-format #Similar to me: The maximum distance that each skin point can be offset (both ways), measured perpendicular to the perimeter wall.\nCan be a % of the nozzle diameter. # 36 changes: The maximum distance that each skin point can be offset (both ways), measured perpendicular to the perimeter wall. @@ -6975,54 +2278,14 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5893 -msgid "" -"The milling cutter to use (unless more specific extruder settings are " -"specified). " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2316 -msgid "" -"The number of layers on which the elephant foot compensation will be active. " -"The first layer will be shrunk by the elephant foot compensation value, then " -"the next layers will be gradually shrunk less, up to the layer indicated by " -"this value." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5675 -msgid "" -"The object will be grown/shrunk in the XY plane by the configured value " -"(negative = inwards, positive = outwards). This might be useful for fine-" -"tuning sizes.\n" -"This one only applies to the 'exterior' shell of the object.\n" -" !!! it's recommended you put the same value into the 'Inner XY size " -"compensation', unless you are sure you don't have horizontal holes. !!! " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5687 -#Similar to me: The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\nThis one only applies to the 'inner' shell of the object (!!! horizontal holes break the shell !!!) -# 97 changes: The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning hole sizes. -# translation: Az objektum az XY-síkban a beállított értékkel növekszik/zsugorodik (negatív = befelé, pozitív = kifelé). Ez hasznos lehet a furatok méretének finomhangolásához. -msgid "" -"The object will be grown/shrunk in the XY plane by the configured value " -"(negative = inwards, positive = outwards). This might be useful for fine-" -"tuning sizes.\n" -"This one only applies to the 'inner' shell of the object (!!! horizontal " -"holes break the shell !!!)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5561 +#: src/slic3r/GUI/Plater.cpp:1127 msgid "" -"The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/" -"natural, 0.2-0.5 for white and 1 for black." +"The option you selected in the search dialog isn't available in the current " +"mode/tags. Do you want to switch to the option tag?" msgstr "" -#: src/slic3r/GUI/Plater.cpp:6119 +#: src/slic3r/GUI/Plater.cpp:6284 #Similar to me: The platter is empty.\nDo you want to save the project? # 1 changes: The plater is empty.\nDo you want to save the project? # translation: A tárgyasztal üres.\nSzeretné elmenteni a projektet? @@ -7032,51 +2295,11 @@ msgid "" msgstr "" -#: src/slic3r/GUI/BedShapeDialog.cpp:355 -msgid "" -"The position of the model origin (point with coordinates x:0, y:0, z:0) " -"needs to be in the middle of the print bed area. If you load a custom model " -"and it appears misaligned, the origin is not set properly." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:649 -msgid "" -"The settings have a lock and dot to show how they are modified. You can hide " -"them by uncheking this option." -msgstr "" - - -#: src/slic3r/Utils/Http.cpp:111 -#, possible-boost-format -#Similar to me: The slicer detected system SSL certificate store in: %1% -# 6 changes: PrusaSlicer detected system SSL certificate store in: %1% -# translation: A PrusaSlicer észlelte a rendszer SSL tanúsítványtárolóját a következő helyen: %1% -msgid "The slicer detected system SSL certificate store in: %1%" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4247 -#Similar to me: The speed for loading of a filament into extruder after retraction (this only applies to the extruder motor). If left as zero, the retraction speed is used. -# 5 changes: The speed for loading of a filament into extruder after retraction (it only applies to the extruder motor). If left to zero, the retraction speed is used. -# translation: A filament extruderbe való betöltésének sebessége visszahúzás után (csak az extrudermotorra vonatkozik). Ha nullán hagyja, akkor a visszahúzási sebesség kerül felhasználásra. -msgid "" -"The speed for loading of a filament into extruder after retraction (this " -"only applies to the extruder motor). If left as zero, the retraction speed " -"is used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4236 -#Similar to me: The speed for retractions (this only applies to the extruder motor). -# 3 changes: The speed for retractions (it only applies to the extruder motor). -# translation: A visszahúzási sebesség (csak az extruder motorjára vonatkozik). -msgid "The speed for retractions (this only applies to the extruder motor)." -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:88 +#: src/slic3r/GUI/ConfigManipulation.cpp:90 #, possible-c-format, possible-boost-format +#Similar to me: The Spiral Vase mode requires:\n- one perimeter\n- no top solid layers\n- 0% fill density\n- no support material\n- Ensure vertical shell thickness enabled\n- disabled 'no solid infill over perimeters'\n- unchecked 'exact last layer height'\n- unchecked 'dense infill'\n- unchecked 'extra perimeters'- unchecked 'gap fill after last perimeter'- disabled 'no solid fill over X perimeters' +# 134 changes: The Spiral Vase mode requires:\n- one perimeter\n- no top solid layers\n- 0% fill density\n- no support material\n- Ensure vertical shell thickness enabled\n- unchecked 'exact last layer height'\n- unchecked 'dense infill'\n- unchecked 'extra perimeters' +# translation: A Spirális váza módhoz:\n- egy kerület\n- nincs felső tömör réteg\n- 0% kitöltés\n- nincs alátámasztás\n- függőleges héjvastagság engedélyezve\n- letiltva 'pontos utolsó réteg magassága'\n- letiltva 'sűrű kitöltés'\n- letiltva 'extra kerületek' msgid "" "The Spiral Vase mode requires:\n" "- one perimeter\n" @@ -7087,15 +2310,18 @@ msgid "" "- disabled 'no solid infill over perimeters'\n" "- unchecked 'exact last layer height'\n" "- unchecked 'dense infill'\n" -"- unchecked 'extra perimeters'" +"- unchecked 'extra perimeters'- unchecked 'gap fill after last perimeter'- " +"disabled 'no solid fill over X perimeters'" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4827 +#: src/libslic3r/PrintConfig.cpp:4843 #, possible-c-format, possible-boost-format #Similar to me: The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the nozzle diameter.\nIf set to zero, support_material_contact_distance will be used for both top and bottom contact Z distances. # 91 changes: The vertical distance between the object top surface and the support material interface. If set to zero, support_material_contact_distance will be used for both top and bottom contact Z distances. # translation: Függőleges távolság az objektum felső felülete és támaszanyag között. Ha nullára van állítva, akkor a support_material_contact_distance a felső és az alsó érintkezési Z távolsághoz is használható. +# 94 changes: The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the extruding width used for the interface layers. +# translation: A függőleges távolság a tárgy és a támaszanyag határfelülete között (amikor a támaszt a tárgy tetejére nyomtatják). Lehet a határfelületi rétegekhez használt extrudálási szélesség %-a. msgid "" "The vertical distance between object and support material interface(when the " "support is printed on top of the object). Can be a % of the nozzle " @@ -7105,8 +2331,11 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4810 +#: src/libslic3r/PrintConfig.cpp:4826 #, possible-c-format, possible-boost-format +#Similar to me: The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the nozzle diameter. +# 37 changes: The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the extruding width used for the interface layers. +# translation: A támaszanyag és a tárgy közötti függőleges távolság (ha a tárgy a támasz tetejére van nyomtatva). Ennek 0-ra állítása megakadályozza azt is, hogy a Slic3r az első tárgyrétegnél a híd áramlását és sebességét használja. Lehet a határfelületi rétegeknél használt extrudálási szélesség %-a. msgid "" "The vertical distance between support material interface and the object(when " "the object is printed on top of the support). Setting this to 0 will also " @@ -7115,307 +2344,79 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5571 -msgid "" -"The volume multiplier used to compute the final volume to extrude by the " -"algorithm." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5554 -msgid "" -"The volume of melted plastic inside your nozzle. Used by 'advanced wiping'." -msgstr "" - - -#: src/libslic3r/Print.cpp:683 -#Similar to me: The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter and Repetier G-code flavors. -# 16 changes: The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors. -# translation: A törlőtorony jelenleg csak a Marlin, a RepRap/Sprinter, a RepRapFirmware és a Repetier G-kód változatokhoz támogatott. -msgid "" -"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " -"and Repetier G-code flavors." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1120 -msgid "" -"These parameters allow the slicer to smooth the angles in each layer. The " -"precision will be at least the new precision of the curve. Set to 0 to " -"deactivate.\n" -"Note: as it uses the polygon's edges and only works in the 2D planes, you " -"must have a very clean or hand-made 3D model.\n" -"It's really only useful to smoothen functional models or very wide angles." -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Thin extrusions acceleration" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Thin extrusions speed" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:285 src/libslic3r/ExtrusionEntity.cpp:287 -#: src/libslic3r/ExtrusionEntity.cpp:323 -msgid "Thin wall" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5176 -msgid "Thin wall merge" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5165 -msgid "Thin wall overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5141 src/libslic3r/PrintConfig.cpp:5142 -#: src/libslic3r/PrintConfig.cpp:5198 -#Similar to me: Thin walls -# 4 changes: All walls -# translation: Összes fal -msgid "Thin walls" +#: src/slic3r/GUI/Preferences.cpp:625 +msgid "These tooltip may be bothersome. You can hide them with this option." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5184 +#: src/libslic3r/PrintConfig.cpp:5200 +#Similar to me: Thin Walls +# 1 changes: Thin walls +# translation: Vékony falak +# 2 changes: Thin wall +# translation: Vékony fal msgid "Thin Walls" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5185 -msgid "Thin walls acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5152 -msgid "Thin walls min width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5199 -msgid "Thin walls speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:623 -#Similar to me: This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S{first_layer_temperature}\" command wherever you want. -# 2 changes: This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. -# translation: Ez a kód a szekvenciális nyomtatás használatakor az objektumok közé kerül. Alapértelmezés szerint az extruder és az ágy hőmérséklete nem várakozó parancs segítségével visszaáll; azonban ha az M104, M109, M140 vagy M190 kódot észlel a program az egyedi kódban, a Slic3r nem ad hozzá hőmérséklet-parancsokat. Vegye figyelembe, hogy helyőrző változókat is használhat minden Slic3r-beállításhoz, így az \"M109 S[első_réteg_hőmérséklet]\" parancsot bárhova beírhatja. -msgid "" -"This code is inserted between objects when using sequential printing. By " -"default extruder and bed temperature are reset using non-wait command; " -"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " -"will not add temperature commands. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S{first_layer_temperature}\" command wherever you want." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5261 -msgid "" -"This custom code is inserted at every extruder change. If you don't leave " -"this empty, you are expected to take care of the toolchange yourself - " -"Slic3r will not output any other G-code to change the filament. You can use " -"placeholder variables for all Slic3r settings as well as {toolchange_z}, " -"{layer_z}, {layer_num}, {max_layer_z}, {previous_extruder} and " -"{next_extruder}, so e.g. the standard toolchange command can be scripted as " -"T{next_extruder}.!! Warning !!: if any character is written here, Slic3r " -"won't output any toochange command by itself." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3106 -msgid "" -"This custom code is inserted at every extrusion type change.Note that you " -"can use placeholder variables for all Slic3r settings as well as " -"{last_extrusion_role}, {extrusion_role}, {layer_num} and {layer_z}. The " -"'extrusion_role' strings can take these string values: { Perimeter, " -"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " -"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " -"SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the " -"role of the extrusion is not unique, not exactly inside another category or " -"not known." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3093 -#Similar to me: This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as {layer_num} and {layer_z}. -# 4 changes: This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Ez az egyéni kód minden rétegváltásnál beillesztésre kerül, közvetlenül a Z elmozdulás után, mielőtt az extruder az első rétegpontra lépne. Vegye figyelembe, hogy helyőrző változókat is használhat az összes Slic3r-beállításhoz, valamint a [layer_num] és [layer_z] értékekhez. -# 59 changes: This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Ez az egyéni kód minden rétegváltáskor, közvetlenül a Z elmozdulás elé kerül beillesztésre. Vegye figyelembe, hogy helyőrző változókat is használhat az összes Slic3r-beállításhoz, valamint a [layer_num] és [layer_z] értékekhez. -msgid "" -"This custom code is inserted at every layer change, right after the Z move " -"and before the extruder moves to the first layer point. Note that you can " -"use placeholder variables for all Slic3r settings as well as {layer_num} and " -"{layer_z}." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:611 -#Similar to me: This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as {layer_num} and {layer_z}. -# 4 changes: This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Ez az egyéni kód minden rétegváltáskor, közvetlenül a Z elmozdulás elé kerül beillesztésre. Vegye figyelembe, hogy helyőrző változókat is használhat az összes Slic3r-beállításhoz, valamint a [layer_num] és [layer_z] értékekhez. -# 59 changes: This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Ez az egyéni kód minden rétegváltásnál beillesztésre kerül, közvetlenül a Z elmozdulás után, mielőtt az extruder az első rétegpontra lépne. Vegye figyelembe, hogy helyőrző változókat is használhat az összes Slic3r-beállításhoz, valamint a [layer_num] és [layer_z] értékekhez. -msgid "" -"This custom code is inserted at every layer change, right before the Z move. " -"Note that you can use placeholder variables for all Slic3r settings as well " -"as {layer_num} and {layer_z}." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1250 -#Similar to me: This end procedure is inserted at the end of the output file, before the printer end gcode (and before any toolchange from this filament in case of multimaterial printers). Note that you can use placeholder variables for all Slic3r settings. If you have multiple extruders, the gcode is processed in extruder order. -# 6 changes: This end procedure is inserted at the end of the output file, before the printer end gcode (and before any toolchange from this filament in case of multimaterial printers). Note that you can use placeholder variables for all PrusaSlicer settings. If you have multiple extruders, the gcode is processed in extruder order. -# translation: Ez a befejezési eljárás a kimeneti fájl végére kerül, a nyomtató végének g-kódja elé (és többanyagú nyomtatók esetén az adott filamentről történő szerszámváltás előtt). Vegye figyelembe, helyőrző változókat is használhat az összes Slic3r-beállításhoz. Ha több extruderrel rendelkezik, a g-kód feldolgozása az extruder sorrendjében történik. -msgid "" -"This end procedure is inserted at the end of the output file, before the " -"printer end gcode (and before any toolchange from this filament in case of " -"multimaterial printers). Note that you can use placeholder variables for all " -"Slic3r settings. If you have multiple extruders, the gcode is processed in " -"extruder order." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1238 -#Similar to me: This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all Slic3r settings. -# 6 changes: This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all PrusaSlicer settings. -# translation: Ez a befejező eljárás a kimeneti fájl végére kerül. Vegye figyelembe, helyőrző változókat is használhat az összes PrusaSlicer beállításhoz. -msgid "" -"This end procedure is inserted at the end of the output file. Note that you " -"can use placeholder variables for all Slic3r settings." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5444 -#Similar to me: This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin. -# 2 changes: This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin. -# translation: Ez a kísérleti beállítás lineáris milliméter helyett köbmilliméterben adja ki az E értékeket. Ha a firmware még nem ismeri az filamet(ek) átmérőjét, akkor az \"M200 D[filament_diameter_0] T0] T0\" típusú parancsokat beillesztheti a start G-kódba, hogy bekapcsolja a volumetrikus módot, és a Slic3r-ben kiválasztott filamenthez tartozó filament átmérő használatával. Ezt csak a legújabb Marlin támogatja. -msgid "" -"This experimental setting uses outputs the E values in cubic millimeters " -"instead of linear millimeters. If your firmware doesn't already know " -"filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} " -"T0' in your start G-code in order to turn volumetric mode on and use the " -"filament diameter associated to the filament selected in Slic3r. This is " -"only supported in recent Marlin." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:748 -#Similar to me: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this.\nFor reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * (nozzle diameter) * PI/4 -# 101 changes: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this. -# translation: Ez a tényező befolyásolja az áthidaló műanyag mennyiségét. Kicsit csökkentheti, hogy jobban feszítse az extrudátumot és megakadályozza a megereszkedést, bár az alapbeállítások általában jók, és a hűtéssel is érdemes kísérletezni (ventilátorral), mielőtt ezen módosítana. -msgid "" -"This factor affects the amount of plastic for bridging. You can decrease it " -"slightly to pull the extrudates and prevent sagging, although default " -"settings are usually good and you should experiment with cooling (use a fan) " -"before tweaking this.\n" -"For reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * " -"(nozzle diameter) * PI/4" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1689 -#Similar to me: This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 90% and 110%. If you think you need to change this more, check filament diameter and your firmware E steps. This print setting is multiplied against the extrusion_multiplier from the filament tab. Its only purpose is to offer the same functionality but on a per-object basis. -# 174 changes: This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 0.9 and 1.1. If you think you need to change this more, check filament diameter and your firmware E steps. -# translation: Ez a tényező arányosan változtatja az áramlás mennyiségét. Lehet, hogy ezt a beállítást finomítani kell a szép felület és a megfelelő egyfalú szélesség eléréséhez. A szokásos értékek 0,9 és 1,1 között vannak. Ha úgy gondolja, hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament átmérőjét és a firmware E lépéseit. -msgid "" -"This factor changes the amount of flow proportionally. You may need to tweak " -"this setting to get nice surface finish and correct single wall widths. " -"Usual values are between 90% and 110%. If you think you need to change this " -"more, check filament diameter and your firmware E steps. This print setting " -"is multiplied against the extrusion_multiplier from the filament tab. Its " -"only purpose is to offer the same functionality but on a per-object basis." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:708 -msgid "" -"This fan speed is enforced during all infill bridges. It won't slow down the " -"fan if it's currently running at a higher speed.\n" -"Set to 1 to follow default speed.\n" -"Set to -1 to disable this override (internal bridges will use Bridges fan " -"speed).\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4887 -msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to 1 to disable the fan.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5283 -msgid "" -"This fan speed is enforced during all top fills.\n" -"Set to 1 to disable the fan.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:695 -msgid "" -"This fan speed is enforced during bridges and overhangs. It won't slow down " -"the fan if it's currently running at a higher speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2735 -#Similar to me: This feature allows you to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy. -# 4 changes: This feature allows to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy. -# translation: Ez a funkció lehetővé teszi a kitöltés összevonását és a nyomtatás felgyorsítását a vastagabb kitöltési rétegek extrudálásával, miközben megőrzi a vékony kerületeket, így a pontosságot. -msgid "" -"This feature allows you to combine infill and speed up your print by " -"extruding thicker infill layers while preserving thin perimeters, thus " -"accuracy." +#: src/libslic3r/PrintConfig.cpp:5201 +#Similar to me: Thin walls acceleration +# 7 changes: Infill acceleration +# translation: Kitöltési gyorsulás +# 8 changes: Default acceleration +# translation: Alapértelmezett gyorsítás +# 8 changes: Travel acceleration +# translation: Utazás gyorsítása +msgid "Thin walls acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4488 -#Similar to me: This feature allows you to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height. -# 4 changes: This feature allows to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height. -# translation: Ez a funkció megadott számú rétegenként egy tömör réteget kényszerít ki. Állítsa nullára a letiltáshoz. Bármilyen értékre beállítható (például 9999); a Slic3r automatikusan kiválasztja a kombinálandó rétegek maximálisan lehetséges számát a fúvóka átmérőjének és a rétegmagasságnak megfelelően. +#: src/libslic3r/PrintConfig.cpp:5277 +#Similar to me: This custom code is inserted at every extruder change. If you don't leave this empty, you are expected to take care of the toolchange yourself - Slic3r will not output any other G-code to change the filament. You can use placeholder variables for all Slic3r settings as well as {toolchange_z}, {layer_z}, {layer_num}, {max_layer_z}, {previous_extruder} and {next_extruder}, so e.g. the standard toolchange command can be scripted as T{next_extruder}.!! Warning !!: if any character is written here, Slic3r won't output any toochange command by itself. +# 55 changes: This custom code is inserted at every extruder change. If you don't leave this empty, you are expected to take care of the toolchange yourself - Slic3r will not output any other G-code to change the filament. You can use placeholder variables for all Slic3r settings as well as {previous_extruder} and {next_extruder}, so e.g. the standard toolchange command can be scripted as T{next_extruder}.!! Warning !!: if any character is written here, Slic3r won't output any toochange command by itself. +# translation: Ez az egyéni kód minden egyes extruder-váltáskor beillesztésre kerül. Ha ezt nem hagyja üresen, akkor elvárható, hogy a szerszámváltásról maga gondoskodjon - a Slic3r nem fog más G-kódot kiadni a szálcseréhez. Használhat helyőrző változókat az összes Slic3r beállításhoz, valamint a {previous_extruder} és {next_extruder}, így pl. a standard toolchange parancsot T{next_extruder} szkriptként lehet beírni!!! Figyelmeztetés !!!: ha bármilyen karaktert ide írunk, a Slic3r önmagában nem ad ki semmilyen toochange parancsot. msgid "" -"This feature allows you to force a solid layer every given number of layers. " -"Zero to disable. You can set this to any value (for example 9999); Slic3r " -"will automatically choose the maximum possible number of layers to combine " -"according to nozzle diameter and layer height." +"This custom code is inserted at every extruder change. If you don't leave " +"this empty, you are expected to take care of the toolchange yourself - " +"Slic3r will not output any other G-code to change the filament. You can use " +"placeholder variables for all Slic3r settings as well as {toolchange_z}, " +"{layer_z}, {layer_num}, {max_layer_z}, {previous_extruder} and " +"{next_extruder}, so e.g. the standard toolchange command can be scripted as T" +"{next_extruder}.!! Warning !!: if any character is written here, Slic3r " +"won't output any toochange command by itself." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4111 -#Similar to me: This flag enforces a retraction whenever a Z move is done (before it). -# 12 changes: This flag enforces a retraction whenever a Z move is done. -# translation: Ez a jelölő a Z mozgások esetén visszahúzást kényszerít ki. -msgid "This flag enforces a retraction whenever a Z move is done (before it)." +#: src/libslic3r/PrintConfig.cpp:749 +#Similar to me: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this.\nFor reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * (nozzle diameter) * PI/4 +# 101 changes: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this. +# translation: Ez a tényező befolyásolja az áthidaló műanyag mennyiségét. Kicsit csökkentheti, hogy húzza az extrudátumokat és megakadályozza a megereszkedést, bár az alapbeállítások általában jók, és a hűtéssel is érdemes kísérletezni (ventilátorral), mielőtt ezen csípkelődne. +msgid "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this.\n" +"For reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * " +"(nozzle diameter) * PI/4" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5464 +#: src/libslic3r/PrintConfig.cpp:4903 +#Similar to me: This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers. +# 71 changes: This fan speed is enforced during all top fills.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers. +# translation: Ez a ventilátorsebesség minden felső töltésnél érvényesül.\nA ventilátor kikapcsolásához állítsa 1-re.\nA -1 értéket állítsa be a felülbírálat letiltásához.\nCsak a disable_fan_first_layers paranccsal írható felül. +# 81 changes: This fan speed is enforced during bridges and overhangs. It won't slow down the fan if it's currently running at a higher speed.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers. +# translation: Ez a ventilátorsebesség hidak és túlnyúlások során érvényesül. Nem lassítja le a ventilátort, ha éppen nagyobb sebességgel működik.\nA felülírás letiltásához állítsa -1-re.\nCsak a disable_fan_first_layers által felülírható. msgid "" -"This flag will move the nozzle while retracting to minimize the possible " -"blob on leaky extruders.\n" -"Note that as a wipe only happens when there is a retraction, the 'only " -"retract when crossing perimeters' print setting can greatly reduce the " -"number of wipes." +"This fan speed is enforced during all support interfaces, to be able to " +"weaken their bonding with a high fan speed.\n" +"Set to 1 to disable the fan.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5482 +#: src/libslic3r/PrintConfig.cpp:5498 msgid "" "This flag will wipe the nozzle a bit inward after extruding an external " "perimeter. The wipe_extra_perimeter is executed first, then this move inward " @@ -7425,23 +2426,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5983 -msgid "" -"This increases the size of the object by a certain amount to have enough " -"plastic to mill. You can set a number of mm or a percentage of the " -"calculated optimal extra width (from flow calculation)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1627 -#Similar to me: This is only used in Slic3r interface as a visual help. -# 4 changes: This is only used in the Slic3r interface as a visual help. -# translation: Ezt csak a Slic3r felületén használjuk vizuális segítségként. -msgid "This is only used in Slic3r interface as a visual help." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1147 +#: src/libslic3r/PrintConfig.cpp:1148 +#Similar to me: This is the acceleration your printer will be reset to after the role-specific acceleration values are used (perimeter/infill). \nAccelerations from the left column can also be expressed as a percentage of this value.\nThis can be expressed as a percentage (for example: 80%) over the machine Max Acceleration for X axis.\nSet zero to prevent resetting acceleration at all. +# 137 changes: This is the acceleration your printer will be reset to after the role-specific acceleration values are used (perimeter/infill). \nYou can set it as a % of the max of the X machine acceleration limit.\nSet zero to prevent resetting acceleration at all. +# translation: Ez az a gyorsulás, amelyre a nyomtatót a szerepkör-specifikus gyorsulási értékek használata után visszaállítják (kerület/kitöltés). \nEzt az X gépi gyorsulási határérték max. %-ában állíthatja be.\nHa nullát állít be, akkor a gyorsulás egyáltalán nem állítható vissza. msgid "" "This is the acceleration your printer will be reset to after the role-" "specific acceleration values are used (perimeter/infill). \n" @@ -7453,11 +2441,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:656 +#: src/libslic3r/PrintConfig.cpp:657 #, possible-c-format, possible-boost-format #Similar to me: This is the acceleration your printer will use for bridges.\nCan be a % of the default acceleration\nSet zero to use default acceleration for bridges. -# 51 changes: This is the acceleration your printer will use for bridges. Set zero to disable acceleration control for bridges. -# translation: Ez az a gyorsulás, amelyet a nyomtató a hidakhoz használ. A nulla beállításával kikapcsolhatja gyorsulásszabályozását a hidak esetén. +# 28 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 29 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 34 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for bridges.\n" "Can be a % of the default acceleration\n" @@ -7465,8 +2457,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:871 +#: src/libslic3r/PrintConfig.cpp:872 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for brim and skirt. \nCan be a % of the support acceleration\nSet zero to use support acceleration. +# 47 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 50 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 53 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for brim and skirt. \n" "Can be a % of the support acceleration\n" @@ -7474,8 +2473,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1470 +#: src/libslic3r/PrintConfig.cpp:1471 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for external perimeters. \nCan be a % of the internal perimeter acceleration\nSet zero to use internal perimeter acceleration for external perimeters. +# 54 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 69 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. +# 69 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. msgid "" "This is the acceleration your printer will use for external perimeters. \n" "Can be a % of the internal perimeter acceleration\n" @@ -7483,7 +2489,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2370 +#: src/libslic3r/PrintConfig.cpp:2371 #Similar to me: This is the acceleration your printer will use for first layer of object above raft interface.\nIf set to %, all accelerations will be reduced by that ratio.\nSet zero to disable acceleration control for first layer of object above raft interface. # 64 changes: This is the acceleration your printer will use for first layer of object above raft interface. Set zero to disable acceleration control for first layer of object above raft interface. # translation: Ez az a gyorsulás, amelyet a nyomtató a tutaj feletti objektum első rétegéhez használ. A nulla beállításával kikapcsolhatja a gyorsulásszabályozást a tutaj feletti objektum első rétegére. @@ -7496,7 +2502,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2568 +#: src/libslic3r/PrintConfig.cpp:2569 +#Similar to me: This is the acceleration your printer will use for gap fills. \nThis can be expressed as a percentage over the perimeter acceleration.\nSet zero to use perimeter acceleration for gap fills. +# 69 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. msgid "" "This is the acceleration your printer will use for gap fills. \n" "This can be expressed as a percentage over the perimeter acceleration.\n" @@ -7504,8 +2513,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:670 +#: src/libslic3r/PrintConfig.cpp:671 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for internal bridges. \nCan be a % of the default acceleration\nSet zero to use bridge acceleration for internal bridges. +# 37 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 37 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 41 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for internal bridges. \n" "Can be a % of the default acceleration\n" @@ -7513,11 +2529,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3779 +#: src/libslic3r/PrintConfig.cpp:3795 #, possible-c-format, possible-boost-format #Similar to me: This is the acceleration your printer will use for internal perimeters. \nCan be a % of the default acceleration\nSet zero to use default acceleration for internal perimeters. -# 69 changes: This is the acceleration your printer will use for perimeters. Set zero to disable acceleration control for perimeters. -# translation: Ez az a gyorsulás, amelyet a nyomtató a peremvonalakhoz használ. Állítsa nullára a kerületek gyorsulásszabályozásának kikapcsolásához. +# 28 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 41 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 42 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for internal perimeters. \n" "Can be a % of the default acceleration\n" @@ -7525,8 +2545,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3024 +#: src/libslic3r/PrintConfig.cpp:3037 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for ironing. \nCan be a % of the top solid infill acceleration\nSet zero to use top solid infill acceleration for ironing. +# 49 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 57 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 58 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for ironing. \n" "Can be a % of the top solid infill acceleration\n" @@ -7534,8 +2561,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3665 +#: src/libslic3r/PrintConfig.cpp:3681 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for overhangs.\nCan be a % of the bridge acceleration\nSet zero to to use bridge acceleration for overhangs. +# 40 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 41 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 44 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for overhangs.\n" "Can be a % of the bridge acceleration\n" @@ -7543,11 +2577,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4684 +#: src/libslic3r/PrintConfig.cpp:4700 #, possible-c-format, possible-boost-format #Similar to me: This is the acceleration your printer will use for solid infills. \nCan be a % of the default acceleration\nSet zero to use default acceleration for solid infills. -# 65 changes: This is the acceleration your printer will use for infill. Set zero to disable acceleration control for infill. -# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltésekhez használ. Állítsa nullára a kitöltés gyorsulásszabályozás kikapcsolásához. +# 25 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 35 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 38 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for solid infills. \n" "Can be a % of the default acceleration\n" @@ -7555,8 +2593,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2722 +#: src/libslic3r/PrintConfig.cpp:2735 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for Sparse infill.\nCan be a % of the solid infill acceleration\nSet zero to use solid infill acceleration for infill. +# 38 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 50 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. +# 52 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. msgid "" "This is the acceleration your printer will use for Sparse infill.\n" "Can be a % of the solid infill acceleration\n" @@ -7564,8 +2609,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4747 +#: src/libslic3r/PrintConfig.cpp:4763 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for support material interfaces. \nCan be a % of the support material acceleration\nSet zero to use support acceleration for support material interfaces. +# 65 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 72 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. +# 73 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. msgid "" "This is the acceleration your printer will use for support material " "interfaces. \n" @@ -7574,8 +2626,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4725 +#: src/libslic3r/PrintConfig.cpp:4741 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for support material. \nCan be a % of the default acceleration\nSet zero to use default acceleration for support material. +# 34 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 37 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. +# 38 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. msgid "" "This is the acceleration your printer will use for support material. \n" "Can be a % of the default acceleration\n" @@ -7583,8 +2642,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5187 +#: src/libslic3r/PrintConfig.cpp:5203 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for thin walls. \nCan be a % of the external perimeter acceleration\nSet zero to use external perimeter acceleration for thin walls. +# 55 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 61 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 62 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for thin walls. \n" "Can be a % of the external perimeter acceleration\n" @@ -7592,8 +2658,15 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5331 +#: src/libslic3r/PrintConfig.cpp:5347 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for top solid infills. \nCan be a % of the solid infill acceleration\nSet zero to use solid infill acceleration for top solid infills. +# 45 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 53 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. +# 57 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. msgid "" "This is the acceleration your printer will use for top solid infills. \n" "Can be a % of the solid infill acceleration\n" @@ -7601,23 +2674,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:379 -msgid "This is the color that will be enforced on objects in the thumbnails." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1722 -msgid "" -"This is the DEFAULT extrusion spacing. It's convert to a width and this " -"width can be used to REPLACE 0-width fields. It's useless when all width " -"fields have a value.Like Default extrusion width but spacing is the distance " -"between two lines (as they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1703 +#: src/libslic3r/PrintConfig.cpp:1704 +#Similar to me: This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width fields. It's useless when all other width fields have a value.\nSet this to a non-zero value to allow a manual extrusion width. If left to zero, Slic3r derives extrusion widths from the nozzle diameter (see the tooltips for perimeter extrusion width, infill extrusion width etc). If expressed as percentage (for example: 105%), it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. +# 2 changes: This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width fields. It's useless when all other width fields have a value.Set this to a non-zero value to allow a manual extrusion width. If left to zero, Slic3r derives extrusion widths from the nozzle diameter (see the tooltips for perimeter extrusion width, infill extrusion width etc). If expressed as percentage (for example: 105%), it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. +# translation: Ez a DEFAULT extrudálási szélesség. CSAK a 0 szélességű mezők Pótlására használható. Használhatatlan, ha az összes többi szélességi mezőnek van értéke.Állítsa be ezt a mezőt nem nulla értékre, hogy lehetővé tegye a manuális extrudálási szélességet. Ha nullán hagyja, a Slic3r a fúvóka átmérőjéből származtatja az extrudálás szélességét (lásd a perem extrudálás szélességére, a kitöltő extrudálás szélességére stb. vonatkozó eszköztanácsokat). Ha százalékban van megadva (például: 105%), akkor a fúvóka átmérője fölött lesz kiszámítva.\nBeállíthatja a 'Spacing' (távolság) vagy a 'Width' (szélesség) értéket; a másik értéket a perem 'Overlap' (átfedés) százalékos értékei és az alapértelmezett rétegmagasság alapján számítja ki. msgid "" "This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width " "fields. It's useless when all other width fields have a value.\n" @@ -7631,43 +2691,14 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5909 -msgid "This is the diameter of your cutting tool." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3372 -#, possible-c-format, possible-boost-format -#Similar to me: This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. \nCan be a % of the nozzle diameter.\nIf set to 0, layer height is limited to 75% of the nozzle diameter. -# 38 changes: This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter. -# translation: Ez a legmagasabb nyomtatható rétegmagasság ennél az extrudernél, amely a változó rétegmagasság és a hordozóréteg magasságának korlátozására szolgál. Az maximális ajánlott rétegmagasság az extrudálási szélesség 75%-a, az ésszerű rétegek közötti tapadás elérése érdekében. Ha 0-ra van állítva, a rétegmagasság a fúvóka átmérőjének 75%-ára korlátozódik. -msgid "" -"This is the highest printable layer height for this extruder, used to cap " -"the variable layer height and support layer height. Maximum recommended " -"layer height is 75% of the extrusion width to achieve reasonable inter-layer " -"adhesion. \n" -"Can be a % of the nozzle diameter.\n" -"If set to 0, layer height is limited to 75% of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3475 -#, possible-c-format, possible-boost-format -#Similar to me: This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm.\nCan be a % of the nozzle diameter. -# 36 changes: This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm. -# translation: Ez az extruder legalacsonyabb nyomtatható rétegmagassága, és korlátozza a változó rétegmagasság felbontását. A tipikus értékek 0,05 mm és 0,1 mm között vannak. -msgid "" -"This is the lowest printable layer height for this extruder and limits the " -"resolution for variable layer height. Typical values are between 0.05 mm and " -"0.1 mm.\n" -"Can be a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2357 +#: src/libslic3r/PrintConfig.cpp:2358 #Similar to me: This is the maximum acceleration your printer will use for first layer.\nIf set to %, all accelerations will be reduced by that ratio.\nSet zero to disable acceleration control for first layer. -# 72 changes: This is the acceleration your printer will use for first layer. Set zero to disable acceleration control for first layer. -# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ. A nulla beállítással az első réteg gyorsulásszabályozása kikapcsolható. +# 52 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\nLehet az alapértelmezett gyorsítás %-ában\nA nulla beállítással az első réteg gyorsításvezérlése letiltható. +# 70 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\nAz alapértelmezett gyorsítás %-ában megadható\nA nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához. +# 71 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \nLehet az alapértelmezett gyorsulás %-a\nAdjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához. msgid "" "This is the maximum acceleration your printer will use for first layer.\n" "If set to %, all accelerations will be reduced by that ratio.\n" @@ -7675,17 +2706,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2344 -msgid "" -"This is the percentage of the flow that is used for the second ironing pass. " -"Typical 10-20%. Should not be higher than 20%, unless you have your top " -"extrusion width greatly superior to your nozzle width. A value too low and " -"your extruder will eat the filament. A value too high and the first pass " -"won't print well." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1177 +#: src/libslic3r/PrintConfig.cpp:1178 msgid "" "This is the reference speed that other 'main' speed can reference to by a " "%.\n" @@ -7697,76 +2718,12 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3536 -msgid "" -"This is the rounding error of the input object. It's used to align points " -"that should be in the same line.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2329 -msgid "" -"This is the width of the ironing pass, in a % of the top infill extrusion " -"width, should not be more than 50% (two times more lines, 50% overlap). It's " -"not necessary to go below 25% (four times more lines, 75% overlap). \n" -"If you have problems with your ironing process, don't forget to look at the " -"flow->above bridge flow, as this setting should be set to min 110% to let " -"you have enough plastic in the top layer. A value too low will make your " -"extruder eat the filament." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1660 -msgid "" -"This offset wil be added to all fan values set in the filament properties. " -"It won't make them go higher than 100% nor lower than 0%." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1649 -msgid "" -"This offset will be added to all extruder temperatures set in the filament " -"settings.\n" -"Note that you should set 'M104 S{first_layer_temperature{initial_extruder} + " -"extruder_temperature_offset{initial_extruder}}'\n" -"instead of 'M104 S{first_layer_temperature}' in the start_gcode" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2947 -#Similar to me: This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, this slows down the G-code generation due to the multiple checks involved. -# 5 changes: This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, slows down the G-code generation due to the multiple checks involved. -# translation: Ez az opció a kitöltést a mennyezetek alátámasztásához ténylegesen szükséges területekre korlátozza (belső tartóanyagként fog működni). Ha engedélyezve van, a többszörös ellenőrzés miatt lassítja a G-kód generálását. -msgid "" -"This option will limit infill to the areas actually needed for supporting " -"ceilings (it will act as internal support material). If enabled, this slows " -"down the G-code generation due to the multiple checks involved." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1386 -#, possible-c-format, possible-boost-format -msgid "" -"This parameter grows the bridged solid infill layers by the specified mm to " -"anchor them into the sparse infill and over the perimeters below. Put 0 to " -"deactivate it. Can be a % of the width of the external perimeter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1374 -#, possible-c-format, possible-boost-format -msgid "" -"This parameter grows the top/bottom/solid layers by the specified mm to " -"anchor them into the sparse infill and support the perimeters above. Put 0 " -"to deactivate it. Can be a % of the width of the perimeters." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:921 +#: src/libslic3r/PrintConfig.cpp:922 #Similar to me: This separate setting will affect the speed of brim and skirt. \nIf expressed as percentage (for example: 80%) it will be calculated over the Support speed setting.\nSet zero to use autospeed for this feature. # 74 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. # translation: Ez a különálló beállítás a külső (látható) kerületek sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti perem sebesség beállítás alapján kerül kiszámításra. Állítsa nullára az automatikus beállításhoz. +# 76 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set zero for auto. +# translation: Ez a különálló beállítás a külső (látható) peremek sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti peremkörök sebességének beállítása alapján kerül kiszámításra. A nulla automatikus érték. # 83 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. # translation: Ez a különálló beállítás a <= 6,5 mm sugarú körvonalak (általában lyukak) sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti Kerületek sebességbeállítása alapján kerül kiszámításra. Állítsa nullára az automatikus beállításhoz. msgid "" @@ -7777,10 +2734,12 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1484 +#: src/libslic3r/PrintConfig.cpp:1485 #Similar to me: This separate setting will affect the speed of external perimeters (the visible ones). \nIf expressed as percentage (for example: 80%) it will be calculated over the Internal Perimeters speed setting.\nSet zero to use autospeed for this feature. # 45 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. # translation: Ez a különálló beállítás a külső (látható) kerületek sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti perem sebesség beállítás alapján kerül kiszámításra. Állítsa nullára az automatikus beállításhoz. +# 47 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set zero for auto. +# translation: Ez a különálló beállítás a külső (látható) peremek sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti peremkörök sebességének beállítása alapján kerül kiszámításra. A nulla automatikus érték. # 79 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. # translation: Ez a különálló beállítás a <= 6,5 mm sugarú körvonalak (általában lyukak) sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti Kerületek sebességbeállítása alapján kerül kiszámításra. Állítsa nullára az automatikus beállításhoz. msgid "" @@ -7792,12 +2751,14 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4420 +#: src/libslic3r/PrintConfig.cpp:4436 #Similar to me: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes).\nIf expressed as percentage (for example: 80%) it will be calculated on the Internal Perimeters speed setting above.\nSet zero to disable. +# 12 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above.\nSet zero to disable. +# translation: Ez a különálló beállítás a <= 6,5 mm sugarú körvonalak (általában lyukak) sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti peremkerületek sebességének beállítása alapján kerül kiszámításra.\nA nulla beállítással kikapcsolható. # 25 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. # translation: Ez a különálló beállítás a <= 6,5 mm sugarú körvonalak (általában lyukak) sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti Kerületek sebességbeállítása alapján kerül kiszámításra. Állítsa nullára az automatikus beállításhoz. -# 59 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Ez a különálló beállítás a külső (látható) kerületek sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti perem sebesség beállítás alapján kerül kiszámításra. Állítsa nullára az automatikus beállításhoz. +# 56 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set zero for auto. +# translation: Ez a különálló beállítás a külső (látható) peremek sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a fenti peremkörök sebességének beállítása alapján kerül kiszámításra. A nulla automatikus érték. msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes).\n" @@ -7807,26 +2768,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4447 -#, possible-c-format, possible-boost-format -msgid "" -"This sets the end of the threshold for small perimeter length. Every " -"perimeter loop lower than this will see their speed reduced a bit, from " -"their normal speed at this length down to small perimeter speed.\n" -"Can be a mm or a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4433 -#, possible-c-format, possible-boost-format -msgid "" -"This sets the threshold for small perimeter length. Every loop with a length " -"lower than this will be printed at small perimeter speed\n" -"Can be a mm value or a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:722 +#: src/libslic3r/PrintConfig.cpp:723 msgid "" "This setting allow you to choose the base for the bridge flow compute, the " "result will be multiplied by the bridge flow to have the final result.\n" @@ -7849,7 +2791,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3417 +#: src/libslic3r/PrintConfig.cpp:3430 #, possible-c-format, possible-boost-format msgid "" "This setting allow you to set the desired flow rate for the autospeed " @@ -7862,408 +2804,136 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5234 -#, possible-c-format -msgid "" -"This setting allows you to modify the time estimation by a % amount. As " -"Slic3r only uses the Marlin algorithm, it's not precise enough if another " -"firmware is used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5252 +#: src/libslic3r/PrintConfig.cpp:5268 msgid "" "This setting allows you to modify the time estimation by a flat amount for " -"each toolchange." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5243 -msgid "" -"This setting allows you to modify the time estimation by a flat amount to " -"compensate for start script, the homing routine, and other things." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4469 -#, possible-c-format, possible-boost-format -msgid "" -"This setting allows you to reduce the overlap between the lines of the solid " -"fill, to reduce the % filled if you see overextrusion signs on solid areas. " -"Note that you should be sure that your flow (filament extrusion multiplier) " -"is well calibrated and your filament max overlap is set before thinking to " -"modify this." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1458 -#, possible-c-format -msgid "" -"This setting allows you to reduce the overlap between the perimeters and the " -"external one, to reduce the impact of the perimeters' artifacts. 100% means " -"that no gap is left, and 0% means that the external perimeter isn't " -"contributing to the overlap with the 'inner' one." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2600 -#, possible-c-format -msgid "" -"This setting allows you to reduce the overlap between the perimeters and the " -"gap fill. 100% means that no gaps are left, and 0% means that the gap fill " -"won't touch the perimeters.\n" -"May be useful if you can see the gapfill on the exterrnal surface, to reduce " -"that artifact." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3879 -#, possible-c-format -msgid "" -"This setting allows you to reduce the overlap between the perimeters, to " -"reduce the impact of the perimeters' artifacts. 100% means that no gap is " -"left, and 0% means that perimeters are not touching each other anymore.\n" -"It's very experimental, please report about the usefulness. It may be " -"removed if there is no use for it." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5225 -msgid "" -"This setting allows you to set how much an hour of printing time is costing " -"you in printer maintenance, loan, human albor, etc." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2956 -#Similar to me: This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width.\nDon't put a value higher than 50% (of the perimeter width), as it will fuse with it and follow the perimeter. -# 111 changes: This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width. -# translation: Ez a beállítás további átfedést alkalmaz a kitöltés és a kerületek között a jobb tapadás érdekében. Elméletileg erre nem kellene, hogy szükség legyen, de a holtjáték hézagokat okozhat. Ha százalékban van megadva (példa: 15%), akkor a kerület extrudálási szélességére kerül kiszámításra. -msgid "" -"This setting applies an additional overlap between infill and perimeters for " -"better bonding. Theoretically this shouldn't be needed, but backlash might " -"cause gaps. If expressed as percentage (example: 15%) it is calculated over " -"perimeter extrusion width.\n" -"Don't put a value higher than 50% (of the perimeter width), as it will fuse " -"with it and follow the perimeter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3402 -#, possible-c-format, possible-boost-format -msgid "" -"This setting control by how much the speed can be reduced to increase the " -"layer time. It's a maximum reduction, so a lower value makes the minimum " -"speed higher. Set to 90% if you don't want the speed to go below 10% of the " -"current speed.\n" -"Set zero to disable" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3121 -msgid "" -"This setting controls the height of last object layers to put the last layer " -"at the exact highest height possible. Experimental." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1826 -msgid "" -"This setting is used to set the maximum speed when extruding inside the wipe " -"tower (use M220). In %, set 0 to disable and use the Filament type instead.\n" -"If disabled, these filament types will have a defaut value of:\n" -" - PVA: 80% to 60%\n" -" - SCAFF: 35%\n" -" - FLEX: 35%\n" -" - OTHERS: 100%\n" -"Note that the wipe tower reset the speed at 100% for the unretract in any " -"case.\n" -"If using marlin, M220 B/R is used to save the speed override before the wipe " -"tower print." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3793 -msgid "" -"This setting may slightly degrade the quality of your external perimeter, in " -"exchange for a better bonding between perimeters.Use it if you have great " -"difficulties with perimeter bonding, for example with high temperature " -"filaments.\n" -"This percentage is the % of overlap between perimeters, a bit like " -"perimeter_overlap and external_perimeter_overlap, but in reverse. You have " -"to set perimeter_overlap and external_perimeter_overlap to 100%, or this " -"setting has no effect. 0: no effect, 50%: half of the nozzle will be over an " -"already extruded perimeter while extruding a new one, unless it's an " -"external one).\n" -"It's very experimental, please report about the usefulness. It may be " -"removed if there is no use for it." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3455 -msgid "" -"This setting represents the base fan speed this filament needs, or at least " -"the minimum PWM your fan needs to work." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3360 -msgid "" -"This setting represents the maximum speed of your fan, used when the layer " -"print time is Very short." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2590 -#, possible-c-format, possible-boost-format -msgid "" -"This setting represents the minimum mm² for a gapfill extrusion to be " -"created.\n" -"Can be a % of (perimeter width)²" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5994 -#, possible-c-format, possible-boost-format -msgid "" -"This setting restricts the post-process milling to a certain height, to " -"avoid milling the bed. It can be a mm or a % of the first layer height (so " -"it can depend on the object)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2075 -msgid "" -"This setting will ensure that all 'overlap' are not higher than this value. " -"This is useful for filaments that are too viscous, as the line can't flow " -"under the previous one." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4614 -#Similar to me: This start procedure is inserted at the beginning, after any printer start gcode (and after any toolchange to this filament in case of multi-material printers). This is used to override settings for a specific filament. If Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S{first_layer_temperature}\" command wherever you want. If you have multiple extruders, the gcode is processed in extruder order. -# 14 changes: This start procedure is inserted at the beginning, after any printer start gcode (and after any toolchange to this filament in case of multi-material printers). This is used to override settings for a specific filament. If PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. If you have multiple extruders, the gcode is processed in extruder order. -# translation: Ez a start eljárás az elejére kerül beillesztésre, a nyomtató indítási g-kódja után (és a több anyagból dolgozó nyomtatók esetében az adott filamentre történő szerszámváltás után). Ez egy adott filamentre vonatkozó beállítások felülbírálására szolgál. Ha a PrusaSlicer az M104, M109, M140 vagy M190 kódot észlel az egyéni kódban, akkor ezek a parancsok nem lesznek automatikusan előre beillesztve, így szabadon testre szabhatja a fűtési parancsok és más egyéni műveletek sorrendjét. Ne feledje, hogy minden PrusaSlicer beállításhoz használhat helyőrző változókat, így bárhová beírhat egy \"M109 S[first_layer_temperature]\" parancsot. Ha több extruderrel rendelkezik, akkor a g-kód az extruderek sorrendjében kerül feldolgozásra. -# 220 changes: This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If PrusaSlicer detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. -# translation: Ez a start eljárás az elejére kerül beillesztésre, miután a tárgyasztal elérte a célhőmérsékletet és az extruder épp most kezdett el melegíteni, mielőtt az extruder befejezte volna a melegítést.\nHa a PrusaSlicer az M104 vagy M190 kódot észlel az egyéni kódban, akkor ezek a parancsok nem lesznek automatikusan előre beillesztve, így szabadon testre szabhatja a fűtési parancsok és más egyéni műveletek sorrendjét. Ne feledje, hogy minden PrusaSlicer beállításhoz használhat helyőrző változókat, így bárhová beírhat egy \"M109 S[first_layer_temperature]\" parancsot. -msgid "" -"This start procedure is inserted at the beginning, after any printer start " -"gcode (and after any toolchange to this filament in case of multi-material " -"printers). This is used to override settings for a specific filament. If " -"Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " -"will not be prepended automatically so you're free to customize the order of " -"heating commands and other custom actions. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S{first_layer_temperature}\" command wherever you want. If you have multiple " -"extruders, the gcode is processed in extruder order." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4588 -#Similar to me: This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder has just started heating, but before extruder has finished heating. If Slic3r detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S{first_layer_temperature}\" command wherever you want.\n placeholders: initial_extruder, total_layer_count, has_wipe_tower, has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx,miny,maxx,maxy] -# 187 changes: This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If PrusaSlicer detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. -# translation: Ez a start eljárás az elejére kerül beillesztésre, miután a tárgyasztal elérte a célhőmérsékletet és az extruder épp most kezdett el melegíteni, mielőtt az extruder befejezte volna a melegítést.\nHa a PrusaSlicer az M104 vagy M190 kódot észlel az egyéni kódban, akkor ezek a parancsok nem lesznek automatikusan előre beillesztve, így szabadon testre szabhatja a fűtési parancsok és más egyéni műveletek sorrendjét. Ne feledje, hogy minden PrusaSlicer beállításhoz használhat helyőrző változókat, így bárhová beírhat egy \"M109 S[first_layer_temperature]\" parancsot. -msgid "" -"This start procedure is inserted at the beginning, after bed has reached the " -"target temperature and extruder has just started heating, but before " -"extruder has finished heating. If Slic3r detects M104 or M190 in your custom " -"codes, such commands will not be prepended automatically so you're free to " -"customize the order of heating commands and other custom actions. Note that " -"you can use placeholder variables for all Slic3r settings, so you can put a " -"\"M109 S{first_layer_temperature}\" command wherever you want.\n" -" placeholders: initial_extruder, total_layer_count, has_wipe_tower, " -"has_single_extruder_multi_material_priming, total_toolchanges, " -"bounding_box[minx,miny,maxx,maxy]" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:806 -msgid "This template will be used for drawing button text on hover." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:8419 -#Similar to me: This version of Slic3r may not understand configurations produced by the newest Slic3r versions. For example, newer Slic3r may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. -# 18 changes: This version of PrusaSlicer may not understand configurations produced by the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. -# translation: A PrusaSlicer ezen verziója nem feltétlenül érti a legújabb PrusaSlicer verziók által létrehozott konfigurációkat. Az újabb PrusaSlicer például bővítheti a támogatott firmware változatok listáját. Az ember eldöntheti, hogy kilép, vagy az ismeretlen értéket egy alapértelmezett értékkel helyettesíti csendben vagy megjegyzéssel. -msgid "" -"This version of Slic3r may not understand configurations produced by the " -"newest Slic3r versions. For example, newer Slic3r may extend the list of " -"supported firmware flavors. One may decide to bail out or to substitute an " -"unknown value with a default silently or verbosely." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5707 -msgid "Threshold" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "threshold for" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:377 -msgid "Thumbnail color" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Thumbnail options" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Thumbnails" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:367 -msgid "Thumbnails size" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:253 -#Similar to me: time -# 1 changes: Time -# translation: Idő -msgid "time" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5223 -msgid "Time cost" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:3022 src/libslic3r/PrintConfig.cpp:5232 -msgid "Time estimation compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5241 -msgid "Time for start custom gcode" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5250 -msgid "Time for toolchange" +"each toolchange." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4295 -#, possible-c-format, possible-boost-format +#: src/libslic3r/PrintConfig.cpp:5259 msgid "" -"To avoid visible seam, the extrusion can be stoppped a bit before the end of " -"the loop.\n" -"Can be a mm or a % of the current extruder diameter." +"This setting allows you to modify the time estimation by a flat amount to " +"compensate for start script, the homing routine, and other things." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1928 +#: src/libslic3r/PrintConfig.cpp:4485 +#, possible-c-format, possible-boost-format msgid "" -"To further reduce stringing, it can be helpful to set a lower temperature " -"just prior to extracting filament from the hotend." +"This setting allows you to reduce the overlap between the lines of the solid " +"fill, to reduce the % filled if you see overextrusion signs on solid areas. " +"Note that you should be sure that your flow (filament extrusion multiplier) " +"is well calibrated and your filament max overlap is set before thinking to " +"modify this." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5273 -#Similar to me: Tool name -# 3 changes: Tool type -# translation: Eszköz típus -msgid "Tool name" +#: src/libslic3r/PrintConfig.cpp:1459 +#, possible-c-format +#Similar to me: This setting allows you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters' artifacts. 100% means that no gap is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one. +# 106 changes: This setting allows you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters' artifacts. 100% means that no gap is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it. +# translation: Ez a beállítás lehetővé teszi, hogy csökkentse az átfedést a periméterek és a külső kerületek között, hogy csökkentse a kerületek műtárgyainak hatását. A 100% azt jelenti, hogy nem marad rés, a 0% pedig azt, hogy a külső kerület nem járul hozzá a \"belső\" kerület átfedéséhez.\nEz nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Ha nincs rá szükség, eltávolítható. +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"external one, to reduce the impact of the perimeters' artifacts. 100% means " +"that no gap is left, and 0% means that the external perimeter isn't " +"contributing to the overlap with the 'inner' one." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5916 -#Similar to me: Tool offset -# 4 changes: Z offset -# translation: Z ofszet -msgid "Tool offset" +#: src/libslic3r/PrintConfig.cpp:2613 +#, possible-c-format +#Similar to me: This setting allows you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps are left, and 0% means that the gap fill won't touch the perimeters.\nMay be useful if you can see the gapfill on the exterrnal surface, to reduce that artifact. +# 79 changes: This setting allows you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps are left, and 0% means that the gap fill won't touch the perimeters.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it. +# translation: Ez a beállítás lehetővé teszi a peremek és a hézagkitöltés közötti átfedés csökkentését. A 100% azt jelenti, hogy nem maradnak hézagok, a 0% pedig azt, hogy a hézagkitöltés nem érinti a kerületeket.\nEz nagyon kísérleti jellegű, kérjük, számoljon be a hasznosságáról. Lehet, hogy eltávolításra kerül, ha nincs rá szükség. +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"gap fill. 100% means that no gaps are left, and 0% means that the gap fill " +"won't touch the perimeters.\n" +"May be useful if you can see the gapfill on the exterrnal surface, to reduce " +"that artifact." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5937 -msgid "Tool z lift" +#: src/libslic3r/PrintConfig.cpp:5241 +msgid "" +"This setting allows you to set how much an hour of printing time is costing " +"you in printer maintenance, loan, human albor, etc." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5928 -msgid "Tool z offset" +#: src/slic3r/GUI/Preferences.cpp:825 +msgid "This template will be used for drawing button text on hover." msgstr "" -#: src/slic3r/GUI/GUI_Preview.cpp:1174 -#Similar to me: Tool/C -# 2 changes: Tool -# translation: Eszköz -# 2 changes: Tool # -# translation: Szerszám # -msgid "Tool/C" +#: src/libslic3r/PrintConfig.cpp:8462 +#Similar to me: This version of Slic3r may not understand configurations produced by the newest Slic3r versions. For example, newer Slic3r may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. +# 4 changes: This version of Slic3r may not understand configurations produced by newest Slic3r versions. For example, newer Slic3r may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. +# translation: A Slic3r ezen verziója nem feltétlenül érti a legújabb Slic3r verziók által létrehozott konfigurációkat. Az újabb Slic3r például kibővítheti a támogatott firmware-verziók listáját. Az ember dönthet úgy, hogy kihátrál, vagy egy ismeretlen értéket csendben vagy verbálisan egy alapértelmezett értékkel helyettesít. +# 18 changes: This version of PrusaSlicer may not understand configurations produced by the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. +# translation: A PrusaSlicer ezen verziója nem feltétlenül érti a legújabb PrusaSlicer verziók által létrehozott konfigurációkat. Az újabb PrusaSlicer például bővítheti a támogatott firmware változatok listáját. Az ember eldöntheti, hogy kilép, vagy az ismeretlen értéket egy alapértelmezett értékkel helyettesíti csendben vagy megjegyzéssel. +msgid "" +"This version of Slic3r may not understand configurations produced by the " +"newest Slic3r versions. For example, newer Slic3r may extend the list of " +"supported firmware flavors. One may decide to bail out or to substitute an " +"unknown value with a default silently or verbosely." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1874 -msgid "Toolchange part fan speed" +#: ../../ui_layout/default/print.ui +#Similar to me: threshold for +# 5 changes: Threshold: +# translation: Küszöbérték: +# 5 changes: Threshold +# translation: Küszöbérték +msgid "threshold for" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1927 -#Similar to me: Toolchange temperature -# 8 changes: Nozzle temperature -# translation: Fúvóka hőmérséklet -msgid "Toolchange temperature" +#: ../../ui_layout/default/printer_fff.ui +#Similar to me: Thumbnail options +# 6 changes: Thumbnail color +# translation: Miniatűr színe +msgid "Thumbnail options" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1853 -msgid "Toolchange temperature enabled" +#: ../../ui_layout/default/printer_fff.ui +msgid "Thumbnails" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5281 -#Similar to me: Top fan speed -# 5 changes: Fan speed -# translation: Ventilátor sebesség -msgid "Top fan speed" +#: src/libslic3r/PrintConfig.cpp:5239 +msgid "Time cost" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2281 -#Similar to me: Top fill -# 2 changes: Gap fill -# translation: Hézag kitöltés -# 3 changes: Top View -# translation: Felülnézet -msgid "Top fill" +#: src/libslic3r/PrintConfig.cpp:5257 +msgid "Time for start custom gcode" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2282 -msgid "Top fill flow ratio" +#: src/libslic3r/PrintConfig.cpp:5266 +msgid "Time for toolchange" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1272 +#: src/libslic3r/PrintConfig.cpp:1273 #Similar to me: Top fill Pattern # 1 changes: Top fill pattern # translation: Felső kitöltés mintázata +# 5 changes: Top Pattern +# translation: Felső minta # 6 changes: Bottom fill pattern -# translation: Alsó kitöltés mintázata -# 6 changes: Fill pattern -# translation: Kitöltés mintázata +# translation: Alsó kitöltési minta msgid "Top fill Pattern" msgstr "" - -#: src/slic3r/GUI/CalibrationOverBridgeDialog.cpp:31 -msgid "Top flow calibration" -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: top infill -# 4 changes: Gap fill -# translation: Hézag kitöltés -# 4 changes: infill -# translation: kitöltés _ nyomtatásakor +# 3 changes: Top fill +# translation: Felső kitöltés +# 3 changes: Max infill +# translation: Max kitöltés # 4 changes: Solid infill # translation: Tömör kitöltés msgid "top infill" @@ -8274,98 +2944,38 @@ msgstr "" # 2 changes: Top fill pattern # translation: Felső kitöltés mintázata # 6 changes: Bottom fill pattern -# translation: Alsó kitöltés mintázata +# translation: Alsó kitöltési minta # 7 changes: Fill pattern -# translation: Kitöltés mintázata +# translation: Kitöltési minta msgid "Top infill pattern" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5359 -#Similar to me: Top layers -# 4 changes: Add Layers -# translation: Rétegek hozzáadása -# 4 changes: layers -# translation: réteg(nél) -# 4 changes: Raft layers -# translation: Tutaj rétegek -msgid "Top layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5342 -msgid "Top solid" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5328 -msgid "Top solid " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5329 +#: src/libslic3r/PrintConfig.cpp:5345 +#Similar to me: Top solid acceleration +# 7 changes: Travel acceleration +# translation: Utazás gyorsítása +# 8 changes: Default acceleration +# translation: Alapértelmezett gyorsítás +# 8 changes: Infill acceleration +# translation: Kitöltési gyorsulás msgid "Top solid acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5313 -#Similar to me: Top solid spacing -# 6 changes: Top solid infill -# translation: Felső tömör kitöltés -# 6 changes: Top solid layers -# translation: Felső tömör rétegek -msgid "Top solid spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5343 -#Similar to me: Top solid speed -# 5 changes: Top solid layers -# translation: Felső tömör rétegek -# 6 changes: Top solid infill -# translation: Felső tömör kitöltés -msgid "Top solid speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6180 +#: src/libslic3r/PrintConfig.cpp:6196 msgid "Tough" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5382 -msgid "Travel acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4283 -msgid "Travel cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5404 -msgid "Travel speed" -msgstr "" - #: ../../ui_layout/default/print.ui msgid "Tuning ironing" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5741 -#Similar to me: Twisting -# 3 changes: Editing -# translation: Szerkesztés -# 3 changes: Printing -# translation: Nyomtatás -msgid "Twisting" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4914 +#: src/slic3r/GUI/Tab.cpp:4916 #Similar to me: UNLOCKED LOCK icon indicates that the values this widget control were changed and at least one is not equal to the system (or default) value.\nClick to reset current all values to the system (or default) values. # 43 changes: UNLOCKED LOCK icon indicates that the value was changed and is not equal to the system (or default) value.\nClick to reset current value to the system (or default) value. -# translation: NYITOTT LAKAT ikon azt jelzi, hogy az érték megváltozott, és nem egyenlő a rendszer (vagy az alapértelmezett) értékkel.\nKattintson az aktuális érték visszaállításához a rendszer (vagy alapértelmezett) értékre. +# translation: FELOLDOTT ZÁR ikon azt jelzi, hogy az értéket megváltoztatták, és az nem egyenlő a rendszer (vagy alapértelmezett) értékkel.\nKattintson a gombra az aktuális értéknek a rendszer (vagy alapértelmezett) értékre történő visszaállításához. msgid "" "UNLOCKED LOCK icon indicates that the values this widget control were " "changed and at least one is not equal to the system (or default) value.\n" @@ -8373,72 +2983,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3216 -#Similar to me: Use also for time estimate -# 5 changes: Use for time estimate -# translation: Időbecsléshez használja -msgid "Use also for time estimate" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:656 -msgid "Use custom tooltip" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3217 -msgid "Use only as safeguards" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3615 -msgid "" -"Use only one perimeter on first layer, to give more space to the top infill " -"pattern." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3622 -msgid "" -"Use only one perimeter on flat top surface, to give more space to the top " -"infill pattern." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1867 -msgid "Use part fan to cool hotend" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5396 +#: src/libslic3r/PrintConfig.cpp:5412 msgid "Use target acceleration for travel deceleration" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1670 -#Similar to me: Use this option to set the axis letter associated with your printer's extruder (usually E but some printers use A). -# 3 changes: Use this option to set the axis letter associated to your printer's extruder (usually E but some printers use A). -# translation: Ezzel az opcióval állíthatja be a nyomtató extruderéhez tartozó tengely betűjelét (általában E, de egyes nyomtatók A-t használnak). -msgid "" -"Use this option to set the axis letter associated with your printer's " -"extruder (usually E but some printers use A)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:1919 -msgid "usually not necessary to change this" -msgstr "" - - -#: src/slic3r/GUI/ButtonsDescription.cpp:58 -msgid "Value is the same as the last saved preset, but is not the system value" -msgstr "" - - -#: src/slic3r/GUI/ButtonsDescription.cpp:61 -msgid "Value isn't taken into account, it's computed over an other field." -msgstr "" - #: ../../ui_layout/default/printer_sla.ui : l16 msgid "vertical" msgstr "" @@ -8452,27 +3000,10 @@ msgid "Very short layer time - began to decrease extrusion rate" msgstr "" -#: src/slic3r/GUI/GUI_Preview.cpp:256 -msgid "Vol. flow" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3415 +#: src/libslic3r/PrintConfig.cpp:3428 msgid "Volumetric speed for Autospeed" msgstr "" - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:52 -msgid "Voron Cube" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:54 -msgid "" -"Voron cubic cube with many features inside, with a bearing slot on top. " -"Better to check dimensional accuracy." -msgstr "" - #: ../../ui_layout/default/print.ui : l4 #Similar to me: Wall Thickness # 1 changes: Wall thickness @@ -8482,86 +3013,19 @@ msgstr "" #: src/slic3r/GUI/FreeCADDialog.cpp:255 +#Similar to me: What to do with the result? insert it into the existing platter or replacing the current platter by a new one? +# 2 changes: What to do with the result? insert it into the existing plater or replacing the current plater by a new one? +# translation: Mit tegyünk az eredménnyel? Illesszük be a meglévő platerbe, vagy cseréljük le a jelenlegi platert egy újjal? msgid "" "What to do with the result? insert it into the existing platter or replacing " "the current platter by a new one?" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3191 -msgid "" -"When an extruder travels to an object (from the start position or from an " -"object to another), the nozzle height is guaranteed to be at least at this " -"value.\n" -"It's made to ensure the nozzle won't hit clips or things you have on your " -"bed. But be careful to not put a clip in the 'convex shape' of an object.\n" -"Set to 0 to disable." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:202 -msgid "" -"When an object is sliced, it will switch your view from the curent view to " -"the preview (and then gcode-preview) automatically, depending on the option " -"choosen." -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:395 -#, possible-c-format, possible-boost-format -msgid "" -"when printing %s with a volumetric rate of %3.2f mm³/s at filament speed " -"%3.2f mm/s." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1043 -msgid "" -"When printing multiple objects or copies on after another, this will help " -"you to choose how it's ordered.\n" -"Object will sort them by the order of the right panel.\n" -"Lowest Y will sort them by their lowest Y point. Useful for printers with a " -"X-bar.\n" -"Lowest Z will sort them by their height, useful for delta printers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2430 -msgid "" -"When printing with very low layer heights, you might still want to print a " -"thicker bottom layer to improve adhesion and tolerance for non perfect build " -"plates. This can be expressed as an absolute value or as a percentage (for " -"example: 75%) over the lowest nozzle diameter used in by the object." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4138 -#Similar to me: When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder).\nNote: This value will be unretracted when this extruder will load the next time. -# 82 changes: When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder). -# translation: Amikor a visszahúzás szerszámváltás előtt aktiválódik, a filament a megadott mértékben visszahúzásra kerül (a hosszúság a nyers szálon mérendő, mielőtt az belépne az extruderbe). -msgid "" -"When retraction is triggered before changing tool, filament is pulled back " -"by the specified amount (the length is measured on raw filament, before it " -"enters the extruder).\n" -"Note: This value will be unretracted when this extruder will load the next " -"time." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1442 -msgid "" -"When set to a non-zero value this fan speed is used only for external " -"perimeters (visible ones). \n" -"Set to 1 to disable the fan.\n" -"Set to -1 to use the normal fan speed on external perimeters.External " -"perimeters can benefit from higher fan speed to improve surface finish, " -"while internal perimeters, infill, etc. benefit from lower fan speed to " -"improve layer adhesion." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3389 +#: src/libslic3r/PrintConfig.cpp:3402 #Similar to me: When setting other speed settings to 0, Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow.\nThis can be expressed as a percentage (for example: 100%) over the machine Max Feedrate for X axis. +# 101 changes: When setting other speed settings to 0, Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow. +# translation: Ha más sebességbeállításokat 0-ra állít, a Slic3r automatikusan kiszámítja az optimális sebességet, hogy az extrudernyomás állandó maradjon. Ez a kísérleti beállítás a legnagyobb nyomtatási sebesség beállítására szolgál. # 102 changes: When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow. # translation: Ha a többi sebességbeállítás 0-ra van állítva, a Slic3r automatikusan kiszámítja az optimális sebességet az állandó extrudernyomás fenntartása érdekében. Ez a kísérleti beállítás a legnagyobb ön által megengedett nyomtatási sebesség beállítására szolgál. msgid "" @@ -8573,61 +3037,23 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5656 -msgid "" -"When the external perimeter loop extrusion ends, a wipe is done, going " -"slightly inside the print. The number in this settting increases the wipe by " -"moving the nozzle along the loop again before the final wipe." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4224 -#Similar to me: When the retraction is compensated after changing tool, the extruder will push this additional amount of filament (but not on the first extruder after start, as it should already be loaded). -# 68 changes: When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed. -# translation: Amikor a visszahúzás kompenzálásra kerül utazási mozgás után, az extruder ezt a további szálmennyiséget nyomja előre. Erre a beállításra ritkán van szükség. -# 76 changes: When the retraction is compensated after changing tool, the extruder will push this additional amount of filament. -# translation: Amikor a visszahúzás kompenzálásra kerül szerszámváltás után, az extruder ezt a további szálmennyiséget nyomja előre. +#: src/slic3r/GUI/Preferences.cpp:376 msgid "" -"When the retraction is compensated after changing tool, the extruder will " -"push this additional amount of filament (but not on the first extruder after " -"start, as it should already be loaded)." +"When you click on the garbage can (or ctrl+del), ask for the action to do. " +"If disable, it will erase all object without asking" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1035 -msgid "" -"When using 'Complete individual objects', the default behavior is to draw " -"the brim at the beginning of each object. if you prefer to have more place " -"for you objects, you can print all the brims at the beginning, so ther is " -"less problem with collision." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1027 -msgid "" -"When using 'Complete individual objects', the default behavior is to draw " -"the skirt around each object. if you prefer to have only one skirt for the " -"whole platter, use this option." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:362 -msgid "" -"When you create a new project, it will keep the current preset state, and " -"won't open the preset change dialog." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4917 +#: src/slic3r/GUI/Tab.cpp:4919 #Similar to me: WHITE BULLET icon indicates that the values this widget control are all the same as in the last saved preset. # 26 changes: WHITE BULLET icon indicates that the value is the same as in the last saved preset. -# translation: A SZÜRKE PÖTTY azt jelzi, hogy az érték megegyezik az utoljára mentett előbeállítással. +# translation: A FEHÉR GOLYÓ ikon azt jelzi, hogy az érték megegyezik az utolsó elmentett előbeállítással. msgid "" "WHITE BULLET icon indicates that the values this widget control are all the " "same as in the last saved preset." msgstr "" -#: ../../ui_layout/default/print.ui : l336 +#: ../../ui_layout/default/print.ui : l338 #Similar to me: width # 1 changes: Width # translation: Szélesség @@ -8642,161 +3068,42 @@ msgstr "" msgid "Width & Flow" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5596 -#, possible-c-format, possible-boost-format -msgid "" -"Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) " -"only one nozzle diameter." -msgstr "" - -#: ../../ui_layout/default/print.ui : l349 +#: ../../ui_layout/default/print.ui : l351 msgid "width&spacing combo" msgstr "" - -#: src/slic3r/GUI/PresetHints.cpp:81 -msgid "will be turned off by default." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3173 -msgid "Will only take into account the delay for the cooling of overhangs." -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:49 -#, possible-boost-format -msgid "will run at %1%%% by default" -msgstr "" - #: ../../ui_layout/default/extruder.ui msgid "Wipe inside" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5471 src/libslic3r/PrintConfig.cpp:5480 +#: src/libslic3r/PrintConfig.cpp:5487 src/libslic3r/PrintConfig.cpp:5496 msgid "Wipe inside at start" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5502 -#Similar to me: Wipe only when crossing perimeters -# 11 changes: Only retract when crossing perimeters -# translation: Visszahúzás csak kerület kereszezésekor -# 13 changes: Avoid crossing perimeters -# translation: Kerülje el a kerületek keresztezését -msgid "Wipe only when crossing perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5510 -#Similar to me: Wipe speed -# 4 changes: Fan speed -# translation: Ventilátor sebesség -# 4 changes: Print speed -# translation: Nyomtatási sebesség -# 4 changes: Wipe Tower -# translation: Törlőtorony -msgid "Wipe speed" -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: Wipe tower position +# 7 changes: Wipe tower Width +# translation: Törölje a torony szélességét # 7 changes: The top position. # translation: A jelkészlet mérete. msgid "Wipe tower position" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5622 -#Similar to me: Wipe tower Width -# 6 changes: Wipe tower -# translation: Törlőtorony -# 6 changes: Wipe tower brim width -# translation: Törlőtorony karima szélesség -msgid "Wipe tower Width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5606 -#Similar to me: Wipe tower X -# 2 changes: Wipe tower -# translation: Törlőtorony -# 3 changes: Wipe Tower -# translation: Törlőtorony -# 3 changes: wipe tower -# translation: törlőtorony -msgid "Wipe tower X" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5614 -#Similar to me: Wipe tower Y -# 2 changes: Wipe tower -# translation: Törlőtorony -# 3 changes: Wipe Tower -# translation: Törlőtorony -# 3 changes: wipe tower -# translation: törlőtorony -msgid "Wipe tower Y" -msgstr "" - #: ../../ui_layout/default/printer_sla.ui : l9 msgid "X" msgstr "" -#: ../../ui_layout/default/print.ui : l285 +#: ../../ui_layout/default/print.ui : l287 msgid "xy" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5695 -#Similar to me: XY compensation -# 6 changes: XY Size Compensation -# translation: XY méret kompenzáció -msgid "XY compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2304 -#Similar to me: XY First layer compensation -# 9 changes: First layer expansion -# translation: Első réteg túlnyúlása -# 10 changes: XY Size Compensation -# translation: XY méret kompenzáció -msgid "XY First layer compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2314 -msgid "XY First layer compensation height in layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5696 -#Similar to me: XY holes compensation -# 5 changes: XY Size Compensation -# translation: XY méret kompenzáció -msgid "XY holes compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5708 -msgid "XY holes threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2690 -msgid "xyz decimals" -msgstr "" - #: ../../ui_layout/default/printer_sla.ui : l10 msgid "Y" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1080 +#: src/slic3r/GUI/GUI_App.cpp:1082 #, possible-c-format, possible-boost-format #Similar to me: You are running a 32 bit build of %s on 64-bit Windows.\n32 bit build of %s will likely not be able to utilize all the RAM available in the system.\nPlease download and install a 64 bit build of %s.\nDo you wish to continue? # 71 changes: You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n32 bit build of PrusaSlicer will likely not be able to utilize all the RAM available in the system.\nPlease download and install a 64 bit build of PrusaSlicer from https://www.prusa3d.cz/prusaslicer/.\nDo you wish to continue? @@ -8810,57 +3117,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3597 src/libslic3r/PrintConfig.cpp:3945 -msgid "" -"You can add data accessible to custom-gcode macros.\n" -"Each line can define one variable.\n" -"The format is 'variable_name=value'. the variable name should only have [a-" -"zA-Z0-9] characters or '_'.\n" -"A value that can be parsed as a int or float will be avaible as a numeric " -"value.\n" -"A value that is enclosed by double-quotes will be available as a string " -"(without the quotes)\n" -"A value that only takes values as 'true' or 'false' will be a boolean)\n" -"Every other value will be parsed as a string as-is.\n" -"Advice: before using a variable, it's safer to use the function " -"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " -"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " -"'string'." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1771 -msgid "" -"You can add data accessible to custom-gcode macros.\n" -"Each line can define one variable.\n" -"The format is 'variable_name=value'. The variable name should only have [a-" -"zA-Z0-9] characters or '_'.\n" -"A value that can be parsed as a int or float will be avaible as a numeric " -"value.\n" -"A value that is enclosed by double-quotes will be available as a string " -"(without the quotes)\n" -"A value that only takes values as 'true' or 'false' will be a boolean)\n" -"Every other value will be parsed as a string as-is.\n" -"These variables will be available as an array in the custom gcode (one item " -"per extruder), don't forget to use them with the {current_extruder} index to " -"get the current value. If a filament has a typo on the variable that change " -"its type, then the parser will convert evrything to strings.\n" -"Advice: before using a variable, it's safer to use the function " -"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " -"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " -"'string'." -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:30 -msgid "" -"You can choose the dimension of the cube. It's a simple scale, you can " -"modify it in the right panel yourself if you prefer. It's just quicker to " -"select it here." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2295 +#: src/libslic3r/PrintConfig.cpp:2296 +#Similar to me: You can increase this to over-extrude on the first layer if there is not enough plastic because your bed isn't levelled.\nNote: DON'T USE THIS if your only problem is bed leveling, LEVEL YOUR BED! Use this setting only as last resort after all calibrations failed. +# 1 changes: You can increase this to over-extrude on the first layer if there is not enough plastic because your bed isn't levelled.\nNote: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED! Use this setting only as last resort after all calibrations failed. +# translation: Ezt növelheti az első réteg túlnyomó részének, ha nincs elég műanyag, mert az ágya nincs kiegyenlítve.\nMegjegyzés: NE HASZNÁLJA EZT, ha az egyetlen problémája az ágy kiegyenlítése, KIEGYENLÍTENI AZ ÁGYAT! Ezt a beállítást csak végső megoldásként használja, miután minden kalibráció sikertelen volt. msgid "" "You can increase this to over-extrude on the first layer if there is not " "enough plastic because your bed isn't levelled.\n" @@ -8869,26 +3129,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2285 -msgid "" -"You can increase this to over-extrude on the top layer if there is not " -"enough plastic to make a good fill." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3653 -#Similar to me: You can use all configuration options as variables inside this template. For example: {layer_height}, {fill_density} etc. You can also use {timestamp}, {year}, {month}, {day}, {hour}, {minute}, {second}, {version}, {input_filename}, {input_filename_base}. -# 24 changes: You can use all configuration options as variables inside this template. For example: [layer_height], [fill_density] etc. You can also use [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base]. -# translation: A sablonon belül az összes konfigurációs lehetőséget használhatja változóként. Például: [layer_height], [fill_density] stb. Használhatja továbbá a [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base] változókat is. -msgid "" -"You can use all configuration options as variables inside this template. For " -"example: {layer_height}, {fill_density} etc. You can also use {timestamp}, " -"{year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " -"{input_filename}, {input_filename_base}." -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:1721 +#: src/slic3r/GUI/Plater.cpp:1757 #, possible-boost-format #Similar to me: You will not be asked about it again, when: \n- Closing %1%,\n- Loading or creating a new project # 11 changes: You will not be asked about it again, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project @@ -8914,48 +3155,28 @@ msgid "" "- Loading a new project while some presets are modified" msgstr "" -#: ../../ui_layout/default/print.ui : l286 -msgid "z" -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui : l28 -msgid "Z" -msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5760 -msgid "Z full step" +#: src/slic3r/GUI/Plater.cpp:1115 +msgid "Your current tags:" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5414 -#Similar to me: Z Travel -# 1 changes: Z travel -# translation: Z utazás -# 2 changes: Travel -# translation: Utazás -msgid "Z Travel" +#: ../../ui_layout/default/print.ui : l288 +msgid "z" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5415 -msgid "Z travel speed" +#: ../../ui_layout/default/printer_sla.ui : l28 +msgid "Z" msgstr "" #: ../../ui_layout/default/printer_fff.ui msgid "z utilities" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5111 -msgid "Z-lift override" -msgstr "" - #: ../../ui_layout/default/print.ui #Similar to me: Z-offset # 1 changes: Z offset -# translation: Z ofszet +# translation: Z eltolás # 3 changes: Offset -# translation: Offset +# translation: Eltolás msgid "Z-offset" msgstr "" diff --git a/resources/localization/hu/hu_database.po b/resources/localization/hu/hu_database.po index 403c947a6..dca7f2cc6 100644 --- a/resources/localization/hu/hu_database.po +++ b/resources/localization/hu/hu_database.po @@ -1,9399 +1,15300 @@ -msgid "%1$d backward edge" -msgid_plural "%1$d backward edges" -msgstr[0] "%1$d hátsó él" -msgstr[1] "%1$d hátsó él" - -msgid "%1$d degenerate facet" -msgid_plural "%1$d degenerate facets" -msgstr[0] "%1$d degenerált felület" -msgstr[1] "%1$d degenerált felület" - -msgid "%1$d edge fixed" -msgid_plural "%1$d edges fixed" -msgstr[0] "%1$d él javtva" -msgstr[1] "%1$d él javtva" - -msgid "%1$d facet removed" -msgid_plural "%1$d facets removed" -msgstr[0] "%1$d felület eltávolítva" -msgstr[1] "%1$d felület eltávolítva" - -msgid "%1$d facet reversed" -msgid_plural "%1$d facets reversed" -msgstr[0] "%1$d felület megfordítva" -msgstr[1] "%1$d felületek megfordítva" - -msgid "%1$d object was loaded with custom seam." -msgid_plural "%1$d objects were loaded with custom seam." -msgstr[0] "%1$d objektum betöltésre került egyéni varrattal." -msgstr[1] "%1$d objektum betöltésre került egyéni varrattal." - -msgid "%1$d object was loaded with custom supports." -msgid_plural "%1$d objects were loaded with custom supports." -msgstr[0] "%1$d objektum betöltésre került egyéni támasztékokkal." -msgstr[1] "%1$d objektum betöltésre került egyéni támasztékokkal." - -msgid "%1$d object was loaded with multimaterial painting." -msgid_plural "%1$d objects were loaded with multimaterial painting." -msgstr[0] "%1$d objektum betöltésre került többanyagú festéssel." -msgstr[1] "%1$d objektum betöltésre került többanyagú festéssel." - -msgid "%1$d object was loaded with partial sinking." -msgid_plural "%1$d objects were loaded with partial sinking." -msgstr[0] "%1$d objektum betöltésre került részleges süllyedéssel." -msgstr[1] "%1$d objektum betöltésre került részleges süllyedéssel." - -msgid "%1$d object was loaded with variable layer height." -msgid_plural "%1$d objects were loaded with variable layer height." -msgstr[0] "%1$d objektum betöltésre került változó rétegmagassággal." -msgstr[1] "%1$d objektum betöltésre került változó rétegmagassággal." - -msgid "%1$d open edge" -msgid_plural "%1$d open edges" -msgstr[0] "%1$d nyitott él" -msgstr[1] "%1$d nyitott él" +msgid "Portions copyright" +msgstr "Az összetevők szerzői joga" -msgid "%1% (%2$d shell)" -msgid_plural "%1% (%2$d shells)" -msgstr[0] "%1% (%2$d héj)" -msgstr[1] "%1% (%2$d héjak)" +msgid "Copyright" +msgstr "Szerzői jog" msgid "" -"%1% marked with * are not compatible with some installed " -"printers." +"License agreements of all following programs (libraries) are part of " +"application license agreement" msgstr "" -"A *-gal megjelölt %1% nem kompatibilisek az összes telepített " -"nyomtatóval." - -msgid "%1% Preset" -msgstr "%1% Előbeállítás" - -msgid "%1% was substituted with %2%" -msgstr "%1% helyettesítére került a következővel: %2%" - -msgid "%1% was successfully sliced." -msgstr "%1% szeletelése sikeresen megtörtént." +"A következő programok (könyvtárak) licencszerződései az alkalmazás " +"licencszerződésének részét képezik" -msgid "%d presets successfully imported." -msgstr "%d előbeállítás sikeresen importálva." +msgid "About %s" +msgstr "Szerző: %s" -msgid "%s - BREAKING CHANGE" -msgstr "%s - MEGTÖRŐ VÁLTOZÁS" +msgid "Version" +msgstr "Verzió" -msgid "%s - Drop project file" -msgstr "%s - Projekt fájl ejtése" +msgid "is licensed under the" +msgstr "engedélyezve van a következő szerint" -msgid "%s configuration is incompatible" -msgstr "A %s konfiguráció nem kompatibilis" +msgid "GNU Affero General Public License, version 3" +msgstr "GNU Affero General Public License, 3-as verzió" -msgid "%s doesn't support percentage" -msgstr "%s nem támogatja a százalékot" +msgid "" +"SuperSlicer is a skinned version of Slic3r, based on PrusaSlicer by Prusa " +"and the original Slic3r by Alessandro Ranellucci & the RepRap community." +msgstr "" +"A SuperSlicer a Slic3r nyúzott változata, amely a Prusa PrusaSlicerén, " +"valamint Alessandro Ranellucci és a RepRap közösség eredeti Slic3rjén alapul." -msgid "%s error" -msgstr "%s hiba" +msgid "" +"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " +"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand " +"Rémi and numerous others." +msgstr "" +"Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph " +"Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi és még sokan " +"mások közreműködésével." -msgid "%s Family" -msgstr "%s Család" +msgid "Manual by Gary Hodgson. Inspired by the RepRap community." +msgstr "Gary Hodgson kézikönyve. A RepRap közösség ihlette." -msgid "%s has a warning" -msgstr "%s figyelmeztet_" +msgid "Slic3r logo designed by Corey Daniels." +msgstr "A Slic3r logót Corey Daniels tervezte." -msgid "%s has encountered an error" -msgstr "%s hibát észlelt" +msgid "Copy Version Info" +msgstr "Verzióinformáció másolása" msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" -"%s hibát észlelt. Ezt valószínűleg a memória elfogyása okozta. Ha biztos " -"benne, hogy elegendő memória van a rendszerében, akkor ez programhiba is " -"lehet, és örülnénk, ha jelentené." - -msgid "" -"%s has encountered an error. It was likely caused by running out of memory. " -"If you are sure you have enough RAM on your system, this may also be a bug " -"and we would be glad if you reported it.\n" -"\n" -"The application will now terminate." -msgstr "" "%s hibát észlelt. Valószínűleg a memória elfogyása okozta. Ha biztos benne, " -"hogy elegendő RAM van a rendszerében, akkor ez is hiba lehet, és örülnénk, " -"ha jelentené.\n" -"\n" -"Az alkalmazás most leáll." - -msgid "%s has no configuration updates available." -msgstr "A(z) %s nem rendelkezik elérhető konfigurációs frissítéssel." - -msgid "%s incompatibility" -msgstr "%s inkompatibilis" +"hogy elegendő RAM-al rendelkezik a rendszere, ez is hiba lehet, és örülnénk, " +"ha jelentené." -msgid "%s info" -msgstr "%s info" - -msgid "%s information" -msgstr "%s információ" +msgid "Unknown error occured during exporting G-code." +msgstr "Ismeretlen hiba történt a G-kód exportálása közben." msgid "" -"%s now uses an updated configuration structure.\n" -"\n" -"So called 'System presets' have been introduced, which hold the built-in " -"default settings for various printers. These System presets cannot be " -"modified, instead, users now may create their own presets inheriting " -"settings from one of the System presets.\n" -"An inheriting preset may either inherit a particular value from its parent " -"or override it with a customized value.\n" -"\n" -"Please proceed with the %s that follows to set up the new presets and to " -"choose whether to enable automatic preset updates." +"Copying of the temporary G-code to the output G-code failed. Maybe the SD " +"card is write locked?\n" +"Error message: %1%" msgstr "" -"%s mostantól frissített konfigurációs struktúrát használ.\n" -"\n" -"Bevezetésre kerültek az úgynevezett \"rendszer-előbeállítások\", amelyek a " -"különböző nyomtatók beépített alapértelmezett beállításait tartalmazzák. " -"Ezek a rendszer-előbeállítások nem módosíthatók, ehelyett a felhasználók " -"mostantól létrehozhatják saját előbeállításaikat, amelyek a rendszer-" -"előbeállítások valamelyikéből öröklik a beállításokat. Egy öröklődő " -"előbeállítás vagy örökölhet egy adott értéket a szülőjétől, vagy " -"felülírhatja azt egy testreszabott értékkel.\n" -"\n" -"Az új előbeállítások beállításához, valamint annak kiválasztásához, hogy " -"engedélyezni kívánja-e az automatikus előbeállítás-frissítéseket, kérjük, " -"folytassa a következő %s lépéseket." +"Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült. Lehet, hogy az " +"SD-kártya írásvédett?\n" +"Hibaüzenet: %1%" -msgid "%s View Mode" -msgstr "%s Megjelenítési Mód" +msgid "" +"Copying of the temporary G-code to the output G-code failed. There might be " +"problem with target device, please try exporting again or using different " +"device. The corrupted output G-code is at %1%.tmp." +msgstr "" +"Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült. Probléma lehet " +"a céleszközzel. Kérjük, próbálkozzon újra az exportálással, vagy használjon " +"másik eszközt. A sérült kimeneti G-kód %1%.tmp." -msgid "%s warning" -msgstr "%s figyelmeztetés" +msgid "" +"Renaming of the G-code after copying to the selected destination folder has " +"failed. Current path is %1%.tmp. Please try exporting again." +msgstr "" +"A G-kód átnevezése a kiválasztott célmappába másolás után nem sikerült. A " +"jelenlegi elérési út %1%.tmp. Kérjük, próbálja meg újra az exportálást." msgid "" -"%s will now start updates. Otherwise it won't be able to start.\n" -"\n" -"Note that a full configuration snapshot will be created first. It can then " -"be restored at any time should there be a problem with the new version.\n" -"\n" -"Updated configuration bundles:" +"Copying of the temporary G-code has finished but the original code at %1% " +"couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"%s most elindítja a frissítéseket. Ellenkező esetben nem fog tudni " -"elindulni.\n" -"\n" -"Felhívjuk a figyelmet arra, hogy először egy teljes konfigurációs " -"pillanatfelvétel készül. Ez a későbbiekben bármikor visszaállítható, ha " -"probléma merülne fel az új verzióval.\n" -"\n" -"Frissített konfigurációs csomagok:" +"Az ideiglenes G-kód másolása befejeződött, de az eredeti, %1% kódot nem " +"lehetett megnyitni a másolásellenőrzés során. A kimeneti G-kód %2%.tmp." msgid "" -"%s\n" -"Do you want to continue?" +"Copying of the temporary G-code has finished but the exported code couldn't " +"be opened during copy check. The output G-code is at %1%.tmp." msgstr "" -"%s\n" -"Szeretné folytatni?" +"Az ideiglenes G-kód másolása befejeződött, de az exportált kódot nem " +"lehetett megnyitni a másolásellenőrzés során. A kimeneti G-kód %1%.tmp." -msgid "&About %s" -msgstr "A %s névjegye" +msgid "Running post-processing scripts" +msgstr "Utófeldolgozó szkriptek futtatása" -msgid "&Collapse Sidebar" -msgstr "Oldalsáv Összecsukása" +msgid "G-code file exported to %1%" +msgstr "G-kód fájl exportálva ide: %1%" -msgid "&Configuration" -msgstr "Konfiguráció" +msgid "Slicing complete" +msgstr "Szeletelés elkészült" -msgid "&Configuration Snapshots" -msgstr "Konfigurációs Pillanatfelvételek" +msgid "Masked SLA file exported to %1%" +msgstr "Maszkolt SLA fájl exportálva az alábbi helyre: %1%" -msgid "&Copy" -msgstr "Másolás" +msgid "Copying of the temporary G-code to the output G-code failed" +msgstr "Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült" -msgid "&Delete Selected" -msgstr "Kijelöltek törlése" +msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" +msgstr "" +"Feltöltés ütemezése ide: `%1%`. Lásd: Ablak -> Nyomtató-feltöltési " +"várakozási sor" -msgid "&Edit" -msgstr "&Szerkesztés" +msgid "Size" +msgstr "Méret" -msgid "&Export" -msgstr "Exportlálás" +msgid "Origin" +msgstr "Eredet" -msgid "&Filament Settings Tab" -msgstr "Filament Beállítások Fül" +msgid "Diameter" +msgstr "Átmérő" -msgid "&File" -msgstr "&Fájl" +msgid "Size in X and Y of the rectangular plate." +msgstr "A téglalap alakú lemez X és Y mérete." -msgid "&Finish" -msgstr "Befejezés" +msgid "" +"Distance of the 0,0 G-code coordinate from the front left corner of the " +"rectangle." +msgstr "A 0,0 G-kód koordináta távolsága a téglalap bal elülső sarkától." -msgid "&Fullscreen" -msgstr "Teljes Képernyő" +msgid "mm" +msgstr "mm" -msgid "&G-code Preview" -msgstr "G-Kód Előnézet" +msgid "" +"Diameter of the print bed. It is assumed that origin (0,0) is located in the " +"center." +msgstr "" +"A tárgyasztal átmérője. Feltételezzük, hogy az origó (0,0) a középpontban " +"található." -msgid "&Help" -msgstr "&Segítség" +msgid "Rectangular" +msgstr "Négyszögletes" -msgid "&Import" -msgstr "Importálás" +msgid "Circular" +msgstr "Körkörös" -msgid "&Language" -msgstr "Nyelv" +msgid "Custom" +msgstr "Egyedi" -msgid "&New Project" -msgstr "Új Projekt" +msgid "Invalid" +msgstr "Érvénytelen" -msgid "&Next >" -msgstr "Következő >" - -msgid "&Open G-code" -msgstr "&G-kód megnyitása" - -msgid "&Open Project" -msgstr "Projekt megnyitása" +msgid "Shape" +msgstr "Alakzat" -msgid "&Paste" -msgstr "&Beillesztés" +msgid "Load shape from STL..." +msgstr "Alakzat betöltése STL-ből…" -msgid "&Preferences" +msgid "Settings" msgstr "Beállítások" -msgid "&Quit" -msgstr "Bezárás" - -msgid "&Redo" -msgstr "Mégis" - -msgid "&Repair STL file" -msgstr "STL fájl javítása" - -msgid "&Save Project" -msgstr "Projekt mentése" - -msgid "&Select All" -msgstr "Összes kijelőlése" +msgid "Texture" +msgstr "Textúra" -msgid "&Undo" -msgstr "Visszavonás" +msgid "Load..." +msgstr "Betöltés..." -msgid "&View" -msgstr "&Nézet" +msgid "Remove" +msgstr "Eltávolítás" -msgid "&Window" -msgstr "&Ablak" +msgid "Not found:" +msgstr "Nem található:" -msgid "(All)" -msgstr "(Minden)" +msgid "Model" +msgstr "Modell" -msgid "(including spool)" -msgstr "(beleértve a spulnit)" +msgid "" +"The position of the model origin (point with coordinates x:0, y:0, z:0) " +"needs to be in the middle of the print bed area. If you load a custom model " +"and it appears misaligned, the origin is not set properly." +msgstr "" +"A modell kezdőpontjának (pont x:0, y:0, z:0 koordinátákkal) a nyomtatási " +"ágyterület közepén kell lennie. Ha egyéni modellt tölt be, és az rosszul " +"igazodik, akkor az origó nincs megfelelően beállítva." -msgid "(minimum)." -msgstr "(minimum)." +msgid "Choose an STL file to import bed shape from:" +msgstr "Válasszon egy STL-fájlt az alakzat ágyra importálásához:" -msgid "(Re)slice" -msgstr "(Újra)szeletelés" +msgid "Invalid file format." +msgstr "Nem megfelelő formátum." -msgid "(Re)Slice No&w" -msgstr "(Újra)Szeletelés Most" +msgid "Error! Invalid model" +msgstr "Hiba! Nem megfelelő modell" -msgid "(Some lines not shown)" -msgstr "(Néhány sor nem látható)" +msgid "The selected file contains no geometry." +msgstr "A kiválasztott fájl nem tartalmaz geometriát." -msgid "(Unknown)" -msgstr "(Ismeretlen)" +msgid "" +"The selected file contains several disjoint areas. This is not supported." +msgstr "" +"A kiválasztott fájl több különálló területet tartalmaz. Ez nem támogatott." -msgid ") not found." -msgstr ") nem található." +msgid "Choose a file to import bed texture from (PNG/SVG):" +msgstr "Válasszon egy fájlt az ágy textúrájának importálásához (PNG/SVG):" -msgid "0 (no open anchors)" -msgstr "0 (nincsenek nyitott horgonyok)" +msgid "Choose an STL file to import bed model from:" +msgstr "Válasszon egy STL-fájlt a modell ágyra importálásához:" -msgid "0 (off)" -msgstr "0 (kikapcsolva)" +msgid "Bed Shape" +msgstr "Ágyforma" -msgid "1 (light)" -msgstr "1 (könnyű)" +msgid "Network lookup" +msgstr "Hálózati keresés" -msgid "1000 (unlimited)" -msgstr "1000 (korlátlan)" +msgid "Address" +msgstr "Cím" -msgid "2 (default)" -msgstr "2 (alapértelmezett)" +msgid "Hostname" +msgstr "Gazdanév" -msgid "3 (heavy)" -msgstr "3 (nehéz)" +msgid "Service name" +msgstr "Szolgáltatás neve" -msgid "3D editor view" -msgstr "3D szerkesztő nézet" +msgid "OctoPrint version" +msgstr "OctoPrint verzió" -msgid "3D Honeycomb" -msgstr "3D Méhsejt" +msgid "Searching for devices" +msgstr "Eszközök keresése" -msgid "3D Mouse disconnected." -msgstr "3D egér leválasztva." +msgid "Finished" +msgstr "Befejezve" -msgid "3Dconnexion settings" -msgstr "3Dconnexion beállítások" +msgid "Buttons And Text Colors Description" +msgstr "Gombok és szövegszínek Leírás" -msgid "< &Back" -msgstr "< Vissza" +msgid "Value is the same as the system value" +msgstr "Az érték megegyezik a rendszerváltozóval" -msgid "" -"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" -"To enable \"%1%\", please switch off \"%2%\"" +msgid "Value is the same as the last saved preset, but is not the system value" msgstr "" -"\"%1%\" ki van kapcsolva, mert \"%2%\" be van kapcsolva a \"%3%\" " -"kategóriában. \n" -"\"%1%\" engedélyezéséhez kapcsolja ki a \"%2%\"-ot." +"Az érték megegyezik az utoljára mentett előre beállított értékkel, de nem " +"rendszerváltozó" msgid "" -"A boolean expression using the configuration values of an active print " -"profile. If this expression evaluates to true, this profile is considered " -"compatible with the active print profile." +"Value was changed and is not equal to the system value or the last saved " +"preset" msgstr "" -"Logikai kifejezés, amely egy aktív nyomtatási profil konfigurációs értékeit " -"használja. Ha ez a kifejezés igaz, akkor ez a profil kompatibilis az aktív " -"nyomtatási profillal." +"Az érték megváltozott, és nem egyenlő a rendszerváltozóval vagy az utoljára " +"mentett előbeállítással" -msgid "" -"A boolean expression using the configuration values of an active printer " -"profile. If this expression evaluates to true, this profile is considered " -"compatible with the active printer profile." +msgid "Value isn't taken into account, it's computed over an other field." msgstr "" -"Logikai kifejezés, amely egy aktív nyomtatóprofil konfigurációs értékeit " -"használja. Ha ez a kifejezés igaz, akkor ez a profil kompatibilis az aktív " -"nyomtatóprofillal." +"Az értéket a rendszer nem veszi figyelembe, egy másik mező alapján számítja " +"ki." + +msgid "Close" +msgstr "Bezárás" + +msgid "Error!" +msgstr "Hiba!" + +msgid "Keyboard shortcuts" +msgstr "Gyorsbillentyűk" + +msgid "Generate" +msgstr "Generál" + +msgid "First layer calibration" +msgstr "Első réteg kalibrálása" msgid "" -"A copy of the current system preset will be created, which will be detached " -"from the system preset." +"Select the step in % between two tests.\n" +"Note that only multiple of 5 are engraved on the parts." msgstr "" -"Létrejön az aktuális rendszer-előbeállítás másolata, amely leválik a " -"rendszer-előbeállításról." +"Válassza ki a két vizsgálat közötti %-os lépést.\n" +"Vegye figyelembe, hogy csak az 5 többszörösét vésik az alkatrészekre." -msgid "A new filament was installed and it will be activated." -msgstr "Új filament lett telepítve, és aktiválásra fog kerülni." +msgid "Select the number of tests" +msgstr "Válassza ki a tesztek számát" -msgid "A new Printer was installed and it will be activated." -msgstr "Új nyomtató lett telepítve, és aktiválásra került." +msgid "Step:" +msgstr "Lépés:" -msgid "A new SLA material was installed and it will be activated." -msgstr "Új SLA anyag lett telepítve, és aktiválásra került." +msgid "Nb tests:" +msgstr "Nb vizsgálatok:" -msgid "A new vendor was installed and one of its printers will be activated" -msgid_plural "" -"New vendors were installed and one of theirs printers will be activated" -msgstr[0] "" -"Új gyártó került telepítésre, és annak egyik nyomtatója aktiválásra került" -msgstr[1] "" -"Új gyártók kerültek telepítésre, és azok egyik nyomtatója aktiválásra került" +msgid "Test Flow Ratio" +msgstr "Teszt áramlási arány" -msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." -msgstr "Az ökölszabály a 160–230 °C PLA, és a 215–250 °C ABS esetén." +msgid "Bridge calibration" +msgstr "Híd kalibrálás" msgid "" -"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " -"no heated bed." +"You can choose the dimension of the cube. It's a simple scale, you can " +"modify it in the right panel yourself if you prefer. It's just quicker to " +"select it here." msgstr "" -"Az ökölszabály a 60 °C PLA és 110 °C az ABS esetében. Ha nincs fűtött " -"tárgyasztala, adjon meg nullát." +"Kiválaszthatja a kocka méretét. Ez egy egyszerű skála, ha szeretné, a jobb " +"oldali panelen maga is módosíthatja. Csak gyorsabb itt kiválasztani." + +msgid "Dimensional accuracy (default)" +msgstr "Méretpontosság (alapértelmezett)" msgid "" -"A slower printing profile might be necessary when using materials with " -"higher viscosity or with some hollowed parts. It slows down the tilt " -"movement and adds a delay before exposure." +"Select a goal, this will change settings to increase the effects to search." msgstr "" -"Nagyobb viszkozitású anyagok vagy üreges alkatrészek esetén lassabb " -"nyomtatási profilra lehet szükség. Lelassítja a billenőmozgást, és " -"késleltetést ad hozzá az expozíció előtt." +"Válasszon ki egy célt, ez megváltoztatja a beállításokat, hogy növelje a " +"keresési hatásokat." -msgid "A toolpath outside the print area was detected." -msgstr "Szerszámpálya található a nyomtatási területen kívül." - -msgid "Abort" -msgstr "Megszakítás" +msgid "Dimension:" +msgstr "Méret:" -msgid "About %s" -msgstr "Szerző: %s" +msgid "Goal:" +msgstr "Cél:" -msgid "above" -msgstr "felett" +msgid "Standard Cube" +msgstr "Standard kocka" -msgid "Above Z" -msgstr "Z felett" +msgid "" +"Standard cubic xyz cube, with a flat top. Better for infill/perimeter " +"overlap calibration." +msgstr "" +"Szabványos kocka xyz kocka, lapos tetejű. Jobb a kitöltés/peremátfedés " +"kalibrálásához." -msgid "Acceleration control (advanced)" -msgstr "Gyorsulásszabályozás (Haladó)" +msgid "Voron Cube" +msgstr "Voron kocka" -msgid "Access violation" -msgstr "Hozzáférés megsértése" +msgid "" +"Voron cubic cube with many features inside, with a bearing slot on top. " +"Better to check dimensional accuracy." +msgstr "" +"Voron kocka, belül sok funkcióval, a tetején csapágyazott résszel. Jobb a " +"méretpontosság ellenőrzése." -msgid "Accuracy" -msgstr "Pontosság" +msgid "Calibration cube" +msgstr "Kalibrációs kocka" -msgid "Accurate" -msgstr "Precíz" +msgid "Generate 10% intervals around current value" +msgstr "Generálás 10% intervallum értékek körül" -msgid "Action" -msgstr "Művelet" +msgid "Generate 2% intervals below current value" +msgstr "Az aktuális érték alatti 2% intervallumok generálása" -msgid "Activate" -msgstr "Aktiválás" +msgid "Flow calibration" +msgstr "Áramlás kalibrálása" -msgid "Active" -msgstr "Aktív" +msgid "Over-Bridge calibration" +msgstr "Over-Bridge kalibráció" -msgid "active" -msgstr "aktív" +msgid "Top flow calibration" +msgstr "Felső áramlási kalibráció" -msgid "Adaptive" -msgstr "Adaptív" +msgid "Over-bridge calibration" +msgstr "Over-bridge kalibráció" -msgid "Adaptive Cubic" -msgstr "Adaptív Kocka" +msgid "Each militer add this value to the retraction value." +msgstr "Minden militer hozzáadja ezt az értéket a visszahúzási értékhez." -msgid "Add" -msgstr "Hozzáadás" +msgid "Select the number milimeters for the tower." +msgstr "Válassza ki a torony milimétereinek számát." -msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" +msgid "Note that only Multiple of 5 can be engraved in the part" msgstr "" -"\"%1%\" hozzáadása a \"%2%\" fizikai nyomtató következő előbeállításaként." - -msgid "Add a pad underneath the supported model" -msgstr "Párna hozzáadása a támasztott modell alá" +"Vegye figyelembe, hogy az alkatrészbe csak az 5-ös többszörösét lehet " +"gravírozni" -msgid "" -"Add a sheath (a single perimeter line) around the base support. This makes " -"the support more reliable, but also more difficult to remove." -msgstr "" -"Hozzáad egy burkolatot (egyetlen kerületi vonalat) a támasztékhoz. Ez " -"megbízhatóbbá, de nehezebben eltávolíthatóvá teszi a támaszt." +msgid "one test" +msgstr "egy teszt" -msgid "Add another code - Ctrl + Left click" -msgstr "További kód hozzáadása - Ctrl + Bal egérgombbal kattintás" +msgid "2x10°" +msgstr "2x10°" -msgid "Add another code - Right click" -msgstr "További kód hozzáadása - Jobb egérgombbal kattintás" +msgid "3x10°" +msgstr "3x10°" -msgid "Add color change" -msgstr "Színváltás hozzáadása" +msgid "4x10°" +msgstr "4x10°" -msgid "Add color change (%1%) for:" -msgstr "Színváltás hozzáadása (%1%) a következőkhöz:" +msgid "3x5°" +msgstr "3x5°" -msgid "Add color change - Left click" -msgstr "Színváltás hozzáadása - Bal egérgombbal kattintás" +msgid "5x5°" +msgstr "5x5°" msgid "" -"Add color change - Left click for predefined color or Shift + Left click for " -"custom color selection" +"Select the number tower to print, and by how many degrees C to decrease each " +"time." msgstr "" -"Színváltás hozzáadása - Bal egérgombbal kattintás előre definiált színhez, " -"vagy Shift + Bal egérgombbal kattintás egyéni színválasztáshoz" +"Válassza ki a nyomtatandó számtornyot, és azt, hogy hány C-fokkal csökkenjen " +"minden alkalommal." -msgid "Add color change marker for current layer" -msgstr "Színváltási jelölő hozzáadása az aktuális réteghez" +msgid "Height:" +msgstr "Magasság:" -msgid "Add custom G-code" -msgstr "Egyedi G-kód hozzáadása" +msgid "Start temp:" +msgstr "Kezdeti hőmérséklet:" -msgid "Add custom template" -msgstr "Egyéni sablon hozzáadása" +msgid "Temp decr:" +msgstr "Hőfok dekl:" -msgid "Add detail" -msgstr "Részlet hozzáadása" +msgid "Remove fil. slowdown" +msgstr "Szál lass. megszüntetés" -msgid "Add drainage hole" -msgstr "Leeresztő furat hozzáadása" +msgid "Retraction calibration" +msgstr "Visszahúzási kalibráció" -msgid "Add extruder change - Left click" -msgstr "Extruder váltás hozzáadása - Bal egérkattintás" +msgid "" +"Select the step in celcius between two tests.\n" +"Note that only multiple of 5 are engraved on the part." +msgstr "" +"Válassza ki a két vizsgálat közötti lépést Celsiusban.\n" +"Vegye figyelembe, hogy csak az 5 többszörösét vésik az alkatrészbe." -msgid "Add extruder to sequence" -msgstr "Extruder hozzáadása a sorozathoz" +msgid "Select the number of tests with lower temperature than the current one." +msgstr "Válassza ki az aktuálisnál alacsonyabb hőmérsékletű tesztek számát." -msgid "Add Generic Subobject" -msgstr "Általános Részobjektum Hzáadása" +msgid "" +"Select the number of tests with higher temperature than the current one." +msgstr "Válassza ki az aktuálisnál magasabb hőmérsékletű tesztek számát." -msgid "Add Height Range" -msgstr "Magasságtartomány hozzáadása" +msgid "Nb down:" +msgstr "Nb le:" -msgid "Add instance" -msgstr "Példány hozzáadása" +msgid "Nb up:" +msgstr "Nb fel:" -msgid "Add Instance of the selected object" -msgstr "A kijelölt objektum újabb példányának hozzáadása" +msgid "Steps:" +msgstr "Lépések:" -msgid "Add layer range" -msgstr "Rétegtartomány hozzáadása" +msgid "Temperature calibration" +msgstr "Hőmérséklet kalibrálás" -msgid "Add Layers" -msgstr "Rétegek hozzáadása" +msgid "" +"Zero layer height is not valid.\n" +"\n" +"The layer height will be reset to 0.01." +msgstr "" +"A nulla rétegmagasság nem érvényes.\n" +"\n" +"A réteg magassága 0,01-re lesz visszaállítva." -msgid "Add pause print" -msgstr "Nyomtatási szünet hozzáadása" +msgid "Layer height" +msgstr "Réteg magassága" -msgid "Add physical printer" -msgstr "Fizikai nyomtató hozzáadása" +msgid "" +"Zero first layer height is not valid.\n" +"\n" +"The first layer height will be reset to 0.01." +msgstr "" +"A nulla első rétegmagasság nem érvényes.\n" +"\n" +"Az első réteg magassága 0,01-re lesz visszaállítva." -msgid "Add point" -msgstr "Pont hozzáadása" +msgid "First layer height" +msgstr "Első réteg magassága" -msgid "Add point to selection" -msgstr "Pont hozzáadása kijelöléshez" +msgid "" +"The Spiral Vase mode requires:\n" +"- one perimeter\n" +"- no top solid layers\n" +"- 0% fill density\n" +"- no support material\n" +"- Ensure vertical shell thickness enabled\n" +"- unchecked 'exact last layer height'\n" +"- unchecked 'dense infill'\n" +"- unchecked 'extra perimeters'" +msgstr "" +"A Spirális váza módhoz:\n" +"- egy kerület\n" +"- nincs felső tömör réteg\n" +"- 0% kitöltés\n" +"- nincs alátámasztás\n" +"- függőleges héjvastagság engedélyezve\n" +"- letiltva 'pontos utolsó réteg magassága'\n" +"- letiltva 'sűrű kitöltés'\n" +"- letiltva 'extra kerületek'" -msgid "Add preset for this printer device" -msgstr "Előbeállítás hozzáadása ehhez a nyomtatóeszközhöz" +msgid "Shall I adjust those settings in order to enable Spiral Vase?" +msgstr "Módosítsam ezeket a beállításokat a Spirális váza engedélyezéséhez?" -msgid "Add Settings Bundle for Height range" -msgstr "Magasságtartományok beállítási csomag hozzáadása" +msgid "Spiral Vase" +msgstr "Spirális váza" -msgid "Add Settings Bundle for Object" -msgstr "Objektum beállítási csomag hozzáadása" +msgid "" +"The Wipe Tower currently supports the non-soluble supports only\n" +"if they are printed with the current extruder without triggering a tool " +"change.\n" +"(both support_material_extruder and support_material_interface_extruder need " +"to be set to 0)." +msgstr "" +"A Wipe Tower jelenleg csak a nem oldódó hordozókat támogatja. Ha azokat az " +"aktuális\n" +"extruderrel nyomtatják, anélkül, hogy szerszámváltást váltanának ki, akkor 0-" +"ra kell\n" +"(állítani a support_material_extruder, és a " +"support_material_interface_extruder értékét)." -msgid "Add Settings Bundle for Sub-object" -msgstr "Alobjektumok beállítási csomag hozzáadása" +msgid "Shall I adjust those settings in order to enable the Wipe Tower?" +msgstr "Módosítsam ezeket a beállításokat, hogy engedélyezzem a Törlőtornyot?" -msgid "Add Settings for Layers" -msgstr "Rétegek beállításainak hozzáadása" +msgid "Wipe Tower" +msgstr "Törlőtorony" -msgid "Add Settings for Object" -msgstr "Objektum beállításainak hozzáadása" +msgid "" +"For the Wipe Tower to work with the soluble supports, the support layers\n" +"need to be synchronized with the object layers." +msgstr "" +"Ahhoz, hogy a Törlőtorony az oldható hordozókkal működjön, a\n" +"hordozórétegek szinkronizálni kell az objektumrétegekkel." -msgid "Add Settings for Sub-object" -msgstr "Alobjektumok beállításainak hozzáadása" +msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" +msgstr "" +"Szinkronizáljam az alátámasztási rétegeket, hogy engedélyezzem a " +"Törlőtornyot?" -msgid "Add Shape" -msgstr "Alakzat hozzáadása" +msgid "" +"It's not possible to use a bigger value for the brim offset than the brim " +"width, as it won't extrude anything. Brim offset have to be lower than the " +"brim width." +msgstr "" +"Nem lehet a perem eltolásához a perem szélességénél nagyobb értéket " +"használni, mivel ez nem fog semmit sem extrudálni. A peremeltolásnak " +"kisebbnek kell lennie, mint a peremszélességnek." -msgid "Add Shape from Gallery" -msgstr "Alakzat Hozzáadása a Galériából" +msgid "Shall I switch the brim offset to 0?" +msgstr "Állítsam a peremeltolást 0-ra?" -msgid "Add Shapes from Gallery" -msgstr "Alakzatok Hozzáadása a Galériából" +msgid "Brim configuration" +msgstr "Perem konfiguráció" -msgid "Add support point" -msgstr "Támasztó pont hozzáadása" +msgid "" +"Supports work better, if the following feature is enabled:\n" +"- overhangs with bridge speed & fan" +msgstr "" +"A támogatások jobban működnek, ha a következő funkció engedélyezve van:\n" +"- túlnyúlások hídsebességgel és ventilátorral" -msgid "Add supports" -msgstr "Támasztékok hozzáadása" +msgid "Shall I adjust those settings for supports?" +msgstr "Módosítsam ezeket a beállításokat az alátámasztásoknak?" -msgid "Add supports by angle" -msgstr "Támasztékok hozzáadása szög alapján" +msgid "Support Generator" +msgstr "Alátámasztási generátor" -msgid "Add..." -msgstr "Hozzáadás..." +msgid "The %1% infill pattern is not supposed to work at 100%% density." +msgstr "A %1%-os kitöltési mintának nem kellene működnie 100%%-os sűrűségnél." -msgid "Add/Remove filaments" -msgstr "Filament Hozzáadása/Eltávolítása" +msgid "Shall I switch to rectilinear fill pattern?" +msgstr "Váltsak egyenes vonalú kitöltési mintára?" -msgid "Add/Remove materials" -msgstr "Alapanyag Hozzáadása/Eltávolítása" +msgid "Infill" +msgstr "Kitöltés" -msgid "Add/Remove presets" -msgstr "Előbeállítás Hozzáadása/Eltávolítása" +msgid "Head penetration should not be greater than the head width." +msgstr "A fej benyúlása nem lehet nagyobb, mint a fej szélessége." -msgid "Add/Remove printers" -msgstr "Nyomtató Hozzáadása/Eltávolítása" +msgid "Invalid Head penetration" +msgstr "Érvénytelen fej benyúlás" -msgid "Additional information:" -msgstr "További információ:" +msgid "Pinhead diameter should be smaller than the pillar diameter." +msgstr "A tűfej átmérőjének kisebbnek kell lennie, mint az oszlop átmérőjének." -msgid "Additional Settings" -msgstr "További beállítások" +msgid "Invalid pinhead diameter" +msgstr "Érvénytelen tűfej átmérő" -msgid "" -"Additionally a backup snapshot of the whole configuration is created before " -"an update is applied." -msgstr "" -"Ezenkívül a frissítés alkalmazása előtt a teljes konfigurációról " -"pillanatfelvétel készül." +msgid "Upgrade" +msgstr "Frissítés" -msgid "Address" -msgstr "Cím" +msgid "Downgrade" +msgstr "Visszaminősítés" -msgid "Advanced" -msgstr "Haladó" +msgid "Before roll back" +msgstr "Visszaállítás előtt" -msgid "Advanced mode" -msgstr "Haladó mód" +msgid "User" +msgstr "Felhasználó" -msgid "Advanced: Output log" -msgstr "Haladó: Kimeneti napló" +msgid "Unknown" +msgstr "Ismeretlen" -msgid "" -"After a tool change, the exact position of the newly loaded filament inside " -"the nozzle may not be known, and the filament pressure is likely not yet " -"stable. Before purging the print head into an infill or a sacrificial " -"object, Slic3r will always prime this amount of material into the wipe tower " -"to produce successive infill or sacrificial object extrusions reliably." -msgstr "" -"Szerszámcsere után előfordulhat, hogy az újonnan betöltött filament pontos " -"helyzete a fúvókán belül nem ismert, és a filamet nyomása még valószínűleg " -"nem stabil. Mielőtt a nyomtatófejet egy kitöltésbe vagy egy feláldozható " -"tárgyba öblítené, a Slic3r ezt az anyagmennyiséget mindig törlőtoronyba " -"tölti, hogy ezután már megbízhatóan tudjon extrudálni kitöltések vagy " -"áldozati tárgyak esetén." +msgid "Active" +msgstr "Aktív" -msgid "After layer change G-code" -msgstr "G-kód Rétegváltás Után" +msgid "%s version" +msgstr "%s verzió" -msgid "Align the model to the given point." -msgstr "A modell igazítása egy megadott ponthoz." +msgid "print" +msgstr "nyomtatás" -msgid "Align XY" -msgstr "XY igazítása" +msgid "filaments" +msgstr "szálak" -msgid "Aligned" -msgstr "Igazított" +msgid "SLA print" +msgstr "SLA nyomtatás" -msgid "All" -msgstr "Összes" +msgid "SLA material" +msgstr "SLA anyag" -msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" -msgstr "Minden gizmo: Forgatás - bal egérgomb; Pásztázás - jobb egérgomb" +msgid "printer" +msgstr "nyomtató" -msgid "All installed printers are compatible with the selected %1%." -msgstr "Minden telepített nyomtató kompatibilis a kiválasztott %1% -val." +msgid "vendor" +msgstr "szállító" -msgid "All non-solid parts (modifiers) were deleted" -msgstr "Minden nem szilárd alkatrész (módosító) törlésre került" +msgid "version" +msgstr "verzió" -msgid "All objects are outside of the print volume." -msgstr "Minden objektum a nyomtatási területen kívülre esik." +msgid "min %s version" +msgstr "min %s verzió" -msgid "All objects will be removed, continue?" -msgstr "Minden objektum el lesz távolítva, folytatja?" +msgid "max %s version" +msgstr "max %s verzió" -msgid "All settings changes will be discarded." -msgstr "Minden beállítási változtatás elvetése." +msgid "model" +msgstr "modell" -msgid "All settings changes will not be saved" -msgstr "A beállítások módosításai nem kerülnek mentésre" +msgid "variants" +msgstr "változatok" -msgid "All solid surfaces" -msgstr "Minden tömör felület" +msgid "Incompatible with this %s" +msgstr "Nem kompatibilis ezzel a %s" -msgid "All standard" -msgstr "Összes standard" +msgid "Activate" +msgstr "Aktiválja" -msgid "All top surfaces" -msgstr "Minden felső felület" +msgid "Configuration Snapshots" +msgstr "Konfigurációs pillanatképek" -msgid "All user presets will be deleted." -msgstr "Az összes felhasználói előbeállítás törlésre kerül." +msgid "nozzle" +msgstr "fúvóka" -msgid "All walls" -msgstr "Összes fal" +msgid "Alternate nozzles:" +msgstr "Alternatív fúvókák:" -msgid "allocation failed" -msgstr "allokáció sikertelen" +msgid "All standard" +msgstr "Minden szabványos" -msgid "Allow next color repetition" -msgstr "Színismétlés engedélyezése" +msgid "Standard" +msgstr "Szabványos" -msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "Csak a \"%1%\" által kiválasztott felületekre enged festeni." +msgid "All" +msgstr "Minden" -msgid "Alt + Mouse wheel" -msgstr "Alt + Egér görgő" +msgid "None" +msgstr "Nincs" -msgid "Alternate nozzles:" -msgstr "Alternatív fúvókák:" +msgid "Welcome to the %s Configuration Assistant" +msgstr "Üdvözöljük a %s konfigurációs segédletben" -msgid "Always ask for unsaved changes in presets when creating new project" -msgstr "" -"Mindig kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " -"projektet hoz létre" +msgid "Welcome to the %s Configuration Wizard" +msgstr "Üdvözöljük a %s konfigurációs varázslóban" -msgid "" -"Always ask for unsaved changes in presets when selecting new preset or " -"resetting a preset" -msgstr "" -"Mindig kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " -"előbeállítást választ vagy visszaállít egy előbeállítást" +msgid "Welcome" +msgstr "Üdvözöljük" msgid "" -"An existing configuration was found in %3%\n" -"created by %1% %2%.\n" -"\n" -"Shall this configuration be imported?" +"Hello, welcome to %s! This %s helps you with the initial configuration; just " +"a few settings and you will be ready to print." msgstr "" -"A %1% %2% által létrehozott %3%-ban egy meglévő konfigurációt " -"találtunk.\n" -"\n" -"Importáljuk ezt a meglévő konfigurációt?" +"Helló, üdvözöljük a %s oldalon! Ez a %s segít a kezdeti konfigurációban; " +"csak néhány beállítás, és máris készen áll a nyomtatásra." -msgid "" -"An object has custom support enforcers which will not be used because " -"supports are disabled." -msgstr "" -"Egy objektumnak vannak olyan egyéni támaszték kényszerítői, amelyek nem " -"lesznek használva, mivel a támasztékok le vannak tiltva." +msgid "Remove user profiles (a snapshot will be taken beforehand)" +msgstr "Felhasználói profilok eltávolítása (előzetesen pillanatkép készül)" -msgid "An object outside the print area was detected." -msgstr "Objektum található a nyomtatási területen kívül." +msgid "%s Family" +msgstr "%s Család" -msgid "" -"An object outside the print area was detected.\n" -"Resolve the current problem to continue slicing." -msgstr "" -"Objektum található a nyomtatási területen kívül.\n" -"A szeletelés folytatásához oldja meg ezt a problémát." +msgid "Printer:" +msgstr "Nyomtató:" -msgid "Another export job is currently running." -msgstr "Jelenleg egy másik exportálási feladat is fut." +msgid "Vendor:" +msgstr "Forgalmazó:" -msgid "Any arrow" -msgstr "Bármelyik nyíl" +msgid "Profile:" +msgstr "Profil:" + +msgid "(All)" +msgstr "(Minden)" msgid "" -"Any modifications should be saved as a new preset inherited from this one." -msgstr "Minden módosítást új, ettől örökölt előbeállításként kell elmenteni." +"Filaments marked with * are not compatible with some installed " +"printers." +msgstr "" +"Néhány telepített nyomtatóval *nem kompatibilisnek jelölt " +"szálak." -msgid "API key" -msgstr "API kulcs" +msgid "All installed printers are compatible with the selected filament." +msgstr "Minden telepített nyomtató kompatibilis a kiválasztott szálakkal." -msgid "API Key / Password" -msgstr "API kulcs / jelszó" +msgid "" +"Only the following installed printers are compatible with the selected " +"filament:" +msgstr "" +"Csak a következő telepített nyomtatók kompatibilisek a kiválasztott " +"szálakkal:" -msgid "Application preferences" -msgstr "Alkalmazás beállítások" +msgid "Custom Printer Setup" +msgstr "Egyedi nyomtató beállítása" -msgid "Apply" -msgstr "Alkalmaz" +msgid "Custom Printer" +msgstr "Egyedi nyomtató" -msgid "Apply changes" -msgstr "Változtatások alkalmazása" +msgid "Define a custom printer profile" +msgstr "Egyéni nyomtatóprofil meghatározása" -msgid "Apply color change automatically" -msgstr "Színváltás alkalmazása automatikusan" +msgid "Custom profile name:" +msgstr "Egyéni profilnév:" -msgid "Apply to all the remaining small objects being loaded." -msgstr "Alkalmazza az összes hátralévő betöltendő kis objektumra." +msgid "Automatic updates" +msgstr "Automatikus frissítések" -msgid "approximate seconds" -msgstr "becsült másodperc" +msgid "Updates" +msgstr "Frissítések" -msgid "Archimedean Chords" -msgstr "Archimédészi" +msgid "Check for application updates" +msgstr "Ellenőrizze az alkalmazás frissítéseit" -msgid "archive is too large" -msgstr "archív túl nagy" +msgid "" +"If enabled, %s checks for new application versions online. When a new " +"version becomes available, a notification is displayed at the next " +"application startup (never during program usage). This is only a " +"notification mechanisms, no automatic installation is done." +msgstr "" +"Ha engedélyezve van, a %s ellenőrzi a frissítéseket. Ha egy új verzió " +"elérhetővé válik, az alkalmazás következő indításakor (soha nem a program " +"használata közben) megjelenik egy értesítés. Ez csak egy értesítési " +"mechanizmus, automatikus telepítés nem történik." -msgid "Are you sure you want to %1% the selected preset?" -msgstr "Biztos, hogy a kiválasztott előbeállítást %1% szeretné?" +msgid "Update built-in Presets automatically" +msgstr "Beépített elő-beállítások automatikus frissítése" msgid "" -"Are you sure you want to cancel firmware flashing?\n" -"This could leave your printer in an unusable state!" +"If enabled, %s downloads updates of built-in system presets in the " +"background.These updates are downloaded into a separate temporary location." +"When a new preset version becomes available it is offered at application " +"startup." msgstr "" -"Biztosan vissza akarja vonni a firmware feltöltését?\n" -"Emiatt a nyomtató használhatatlan állapotba kerülhet!" - -msgid "Are you sure you want to continue?" -msgstr "Biztos, hogy folytatni akarja?" +"Ha engedélyezve van, a %s a háttérben letölti a beépített elő-beállítások " +"frissítéseit. Ezek a frissítések egy külön ideiglenes helyre kerülnek " +"letöltésre. Amikor egy új elő-beállítás verzió elérhetővé válik, az " +"alkalmazás indításakor felajánlja azt." msgid "" -"Are you sure you want to delete \"%1%\" preset from the physical printer " -"\"%2%\"?" +"Updates are never applied without user's consent and never overwrite user's " +"customized settings." msgstr "" -"Biztos, hogy törölni szeretné a \"%1%\" előbeállítást a \"%2%\" fizikai " -"nyomtatóról?" +"A frissítések soha nem kerülnek alkalmazásra a felhasználó beleegyezése " +"nélkül, és soha nem írják felül a felhasználó testreszabott beállításait." -msgid "Are you sure you want to delete \"%1%\" printer?" -msgstr "Biztos benne, hogy törli a \"%1%\" nyomtatót?" +msgid "" +"Additionally a backup snapshot of the whole configuration is created before " +"an update is applied." +msgstr "" +"Ezenkívül a frissítés alkalmazása előtt a teljes konfigurációról biztonsági " +"mentés készül." -msgid "Are you sure you want to do it?" -msgstr "Biztos benne, hogy meg akarja csinálni?" - -msgid "Area fill" -msgstr "Felület kitöltés" - -msgid "Arrange" -msgstr "Elrendezés" - -msgid "Arrange options" -msgstr "Elrendezési lehetőségek" - -msgid "Arrange selection" -msgstr "Kijelöltek elrendezése" +msgid "Reload from disk" +msgstr "Újratöltés lemezről" msgid "" -"Arrange the supplied models in a plate and merge them in a single model in " -"order to perform actions once." +"Export full pathnames of models and parts sources into 3mf and amf files" msgstr "" -"A megadott modellek elredezése és egyetlen modellé való összevonása a " -"tárgyasztalon, hogy egyszerre lehessen végrehajtani a műveleteket." +"A modellek és alkatrészforrások teljes elérési útvonalának exportálása 3mf " +"és amf fájlokba" msgid "" -"Arrangement ignored the following objects which can't fit into a single " -"bed:\n" -"%s" +"If enabled, allows the Reload from disk command to automatically find and " +"load the files when invoked.\n" +"If not enabled, the Reload from disk command will ask to select each file " +"using an open file dialog." msgstr "" -"Az elrendezés figyelmen kívül hagyta a következő objektumokat, amelyek nem " -"férnek el a tárgyasztalon:\n" -"%s" +"Ha engedélyezve van, lehetővé teszi, hogy az Újratöltés lemezről parancs " +"automatikusan megtalálja és betöltse a fájlokat.\n" +"Ha nincs engedélyezve, akkor a Reload from disk parancs minden egyes fájl " +"kiválasztását kéri a megnyitott fájl párbeszédpanel segítségével." -msgid "Arranging" -msgstr "Elrendezés" +msgid "Files association" +msgstr "Fájlok társítása" -msgid "Arranging canceled." -msgstr "Elrendezés visszavonva." +msgid "Associate .3mf files to %1%" +msgstr ".3mf fájlok társítása %1%-hoz" -msgid "Arranging done." -msgstr "Elrendezés kész." +msgid "Associate .stl files to %1%" +msgstr ".stl fájlok társítása %1%-hoz" -msgid "Arrow Down" -msgstr "Lefelé nyíl" +msgid "View mode" +msgstr "Nézet mód" -msgid "Arrow Left" -msgstr "Balra nyíl" +msgid "" +"%s's user interfaces comes in three variants:\n" +"Simple, Advanced, and Expert.\n" +"The Simple mode shows only the most frequently used settings relevant for " +"regular 3D printing. The other two offer progressively more sophisticated " +"fine-tuning, they are suitable for advanced and expert users, respectively." +msgstr "" +"A %s felhasználói felülete három változatban érhető el:\n" +"Egyszerű, Haladó és Szakértő.\n" +"Az Egyszerű mód csak a leggyakrabban használt, a szokásos 3D nyomtatáshoz " +"szükséges beállításokat mutatja. A másik kettő fokozatosan kifinomultabb " +"finomhangolást kínál, ezek a haladó, illetve a szakértő felhasználók számára " +"alkalmasak." -msgid "Arrow Right" -msgstr "Jobbra nyíl" +msgid "Simple mode" +msgstr "Egyszerű mód" -msgid "Arrow Up" -msgstr "Felfelé nyíl" +msgid "Advanced mode" +msgstr "Haladó üzemmód" -msgid "Ask for unsaved changes in presets when creating new project" -msgstr "" -"Kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " -"projektet hoz létre" +msgid "Expert mode" +msgstr "Szakértő mód" -msgid "Ask for unsaved changes in presets when selecting new preset" -msgstr "" -"Kérdezzen rá az előbeállítások nem mentett módosításaira új előbeállítás " -"kiválasztásakor" +msgid "The size of the object can be specified in inches" +msgstr "Az objektum mérete hüvelykben adható meg" -msgid "Ask for unsaved changes in project" -msgstr "Kérdezzen rá a projektben nem mentett változtatásokra" +msgid "Use inches" +msgstr "Hüvelyk használata" -msgid "" -"Ask to save unsaved changes in presets when closing the application or when " -"loading a new project" -msgstr "" -"Kérdezzen rá az előbeállítások nem mentett módosításainak mentésére az " -"alkalmazás bezárásakor vagy új projekt betöltésekor" +msgid "Other Vendors" +msgstr "Egyéb gyártók" -msgid "Attention!" -msgstr "Figyelem!" +msgid "Pick another vendor supported by %s" +msgstr "Válasszon egy másik %s által támogatott szállítót" -msgid "Authorization Type" -msgstr "Engedélyezés Típusa" +msgid "Firmware Type" +msgstr "Firmware típusa" -msgid "Auto generated supports" -msgstr "Automatikusan generált támaszok" +msgid "Firmware" +msgstr "Firmware" -msgid "Auto-center parts" -msgstr "Alkatrészek automatikus középre igazítása" +msgid "Choose the type of firmware used by your printer." +msgstr "Válassza ki a nyomtató által használt firmware típusát." -msgid "Auto-generate points" -msgstr "Pontok automatikus generálása" +msgid "Bed Shape and Size" +msgstr "Ágyforma és méret" -msgid "Auto-repaired %1$d error" -msgid_plural "Auto-repaired %1$d errors" -msgstr[0] "Automatikusan megjavított %1$d hiba" -msgstr[1] "Automatikusan megjavított %1$d hibák" +msgid "Set the shape of your printer's bed." +msgstr "Állítsa be a nyomtató ágyának alakját." -msgid "Autodetected" -msgstr "Automatikusan érzékelve" +msgid "Filament and Nozzle Diameters" +msgstr "Szál és fúvóka átmérője" -msgid "Autogenerate support points" -msgstr "Támasztó pontok automatikus generálása" +msgid "Print Diameters" +msgstr "Nyomtatási átmérők" -msgid "Autogeneration will erase all manually edited points." -msgstr "Az automatikus generálás az összes manuális pontot törölni fogja." +msgid "Enter the diameter of your printer's hot end nozzle." +msgstr "Adja meg a nyomtató fúvókájának átmérőjét." -msgid "Automatic generation" -msgstr "Automatikus generálás" +msgid "Nozzle Diameter:" +msgstr "Fúvóka átmérője:" -msgid "Automatic updates" -msgstr "Automatikus frissítések" +msgid "Enter the diameter of your filament." +msgstr "Adja meg az izzószál átmérőjét." -msgid "Automatically repair an STL file" -msgstr "STL fájl automatikus javítása" +msgid "" +"Good precision is required, so use a caliper and do multiple measurements " +"along the filament, then compute the average." +msgstr "" +"Jó pontosságra van szükség, ezért használjon tolómérőt, és végezzen több " +"mérést a szál mentén, majd számítsa ki az átlagot." -msgid "Autospeed (advanced)" -msgstr "Automatikus Sebesség (haladó)" +msgid "Filament Diameter:" +msgstr "Nyomtatószál átmérője:" -msgid "Avoid crossing perimeters" -msgstr "Kerülje el a kerületek keresztezését" +msgid "Nozzle and Bed Temperatures" +msgstr "Fúvóka és ágyhőmérséklet" -msgid "Avoid crossing perimeters - Max detour length" -msgstr "Kerülje el a kerületek keresztezését - Max kerülőút hossza" +msgid "Temperatures" +msgstr "Hőmérsékletek" -msgid "BACK ARROW" -msgstr "VISSZA NYÍL" +msgid "Enter the temperature needed for extruding your filament." +msgstr "Adja meg a szál adagolásához szükséges hőmérsékletet." -msgid "" -"BACK ARROW icon indicates that the settings were changed and are not equal " -"to the last saved preset for the current option group.\n" -"Click to reset all settings for the current option group to the last saved " -"preset." +msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "" -"VISSZA NYÍL azt jelzi, hogy a beállítások megváltoztak, és nem egyenlők az " -"aktuális opciócsoport utoljára mentett előbeállításával.\n" -"Kattintson az aktuális opciócsoport összes beállításának visszaállításához " -"az utoljára mentett állapotra." +"Az ökölszabály szerint a PLA esetében 160-230°C, az ABS-nél pedig 215-250°C " +"között van." + +msgid "Extrusion Temperature:" +msgstr "Extrudálási hőmérséklet:" + +msgid "°C" +msgstr "°C" msgid "" -"BACK ARROW icon indicates that the value was changed and is not equal to the " -"last saved preset.\n" -"Click to reset current value to the last saved preset." +"Enter the bed temperature needed for getting your filament to stick to your " +"heated bed." msgstr "" -"VISSZA NYÍL ikon azt jelzi, hogy az érték megváltozott, és nem egyenlő az " -"utoljára mentett előbeállítással.\n" -"Kattintson az aktuális érték visszaállításához az utoljára mentett " -"beállításra." +"Adja meg az ágy hőmérsékletét, mely ahhoz szükséges, hogy a nyomtatószál " +"letapadjon." -msgid "Background processing" -msgstr "Feldolgozás a háttérben" +msgid "" +"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " +"no heated bed." +msgstr "" +"Az ökölszabály szerint a PLA esetén 60°C, ABS esetében pedig 110°C. Hagyja " +"nullán, ha nincs fűthető ágy." -msgid "Bail out on unknown configuration values" -msgstr "Kilépés ismeretlen konfigurációs értékek esetén" +msgid "Bed Temperature:" +msgstr "Ágyhőmérséklet:" -msgid "Balanced" -msgstr "Kiegyensúlyozott" +msgid "Filaments" +msgstr "Nyomtatószálak" -msgid "Bed" -msgstr "Tárgyasztal" +msgid "SLA Materials" +msgstr "SLA anyagok" -msgid "Bed custom model" -msgstr "Egyedi tárgyasztal modell" +msgid "FFF Technology Printers" +msgstr "FFF technológiájú nyomtatók" -msgid "Bed custom texture" -msgstr "Egyedi tárgyasztal textúra" +msgid "SLA Technology Printers" +msgstr "SLA technológiájú nyomtatók" -msgid "Bed Shape" -msgstr "Tárgyasztal forma" +msgid "Notice" +msgstr "Értesítés" -msgid "Bed shape" -msgstr "A tárgyasztal formája" +msgid "The following FFF printer models have no filament selected:" +msgstr "A következő FFF-nyomtató modelleknél nincs kiválasztva nyomtatószál:" -msgid "Bed Shape and Size" -msgstr "Az tárgyasztal formája és mérete" +msgid "Do you want to select default filaments for these FFF printer models?" +msgstr "" +"Szeretne alapértelmezett nyomtatószálat választani ezekhez az FFF nyomtató " +"modellekhez?" -msgid "Bed temperature" -msgstr "Tárgyasztal hőmérséklet" +msgid "The following SLA printer models have no materials selected:" +msgstr "A következő SLA nyomtató modellekhez nincs anyag kiválasztva:" -msgid "Bed Temperature:" -msgstr "Tárgyasztal hőmérséklet:" +msgid "Do you want to select default SLA materials for these printer models?" +msgstr "" +"Szeretne alapértelmezett SLA anyagokat választani ezekhez a " +"nyomtatómodellekhez?" -msgid "Before layer change G-code" -msgstr "G-kód Rétegváltás Előtt" +msgid "Continue with applying configuration changes?" +msgstr "Folytatja a konfigurációs módosítások alkalmazását?" -msgid "Before roll back" -msgstr "Visszalépés előtt" +msgid "Select all standard printers in this page" +msgstr "Válassza ki az összes szabványos nyomtatót az oldalon" -msgid "Below Z" -msgstr "Z alatt" +msgid "< &Back" +msgstr "< &Vissza" -msgid "Best surface quality" -msgstr "Legjobb felületminőség" +msgid "&Next >" +msgstr "&Következő >" -msgid "Between objects G-code" -msgstr "G-kód Objektumok Között" +msgid "&Finish" +msgstr "&Befejezve" -msgid "Between objects G-code (for sequential printing)" -msgstr "G-kód Objektumok Között (egymás utáni nyomtatáshoz)" +msgid "Cancel" +msgstr "Mégse" -msgid "Block seam" -msgstr "Varrat blokkolása" +msgid "Prusa FFF Technology Printers" +msgstr "Prusa FFF technológiájú nyomtatók" -msgid "Block supports" -msgstr "Támaszték blokkolása" +msgid "Prusa MSLA Technology Printers" +msgstr "Prusa MSLA technológiájú nyomtatók" -msgid "Block supports by angle" -msgstr "Támasztékok blokkolása szög alapján" +msgid "Filament Profiles Selection" +msgstr "Nyomtatószál profil kiválasztása" -msgid "Bottle volume" -msgstr "Flakon térfogata" +msgid "Type:" +msgstr "Típus:" -msgid "Bottle weight" -msgstr "A flakon súlya" +msgid "SLA Material Profiles Selection" +msgstr "SLA anyagprofilok kiválasztása" -msgid "Bottom" -msgstr "Alul" +msgid "Configuration Assistant" +msgstr "Konfigurációs asszisztens" -msgid "Bottom fill pattern" -msgstr "Alsó kitöltés mintázata" +msgid "Configuration &Assistant" +msgstr "Konfiguráció & Asszisztens" -msgid "Bottom interface layers" -msgstr "Alsó interfész rétegek" +msgid "Configuration Wizard" +msgstr "Konfigurációs varázsló" -msgid "Bottom is open." -msgstr "Alsó rész nyitott." +msgid "Configuration &Wizard" +msgstr "Konfiguráció & Varázsló" -msgid "Bottom shell is %1% mm thick for layer height %2% mm." -msgstr "Az alsó héj %1% mm vastag a %2% mm rétegmagassághoz." +msgid "Place bearings in slots and resume printing" +msgstr "Helyezze a csapágyakat a nyílásokba, és folytassa a nyomtatást" -msgid "Bottom solid layers" -msgstr "Alsó szilárd rétegek" +msgid "One layer mode" +msgstr "Egy réteg mód" -msgid "Bottom View" -msgstr "Alulnézet" +msgid "Discard all custom changes" +msgstr "Az összes egyéni módosítás elvetése" -msgid "Bridge" -msgstr "Híd" +msgid "Jump to move" +msgstr "Ugrás a mozgáshoz" -msgid "Bridge flow ratio" -msgstr "Híd áramlási arány" +msgid "" +"Jump to height %s\n" +"Set ruler mode\n" +"or Set extruder sequence for the entire print" +msgstr "" +"Ugrás a magasságra %s\n" +"Vonalzó mód beállítása\n" +"vagy Extruder sorrend beállítása a teljes nyomtatáshoz" -msgid "Bridge infill" -msgstr "Híd kitöltés" +msgid "" +"Jump to height %s\n" +"or Set ruler mode" +msgstr "" +"Ugrás a magasságra %s\n" +"vagy Vonalzó mód beállítása" -msgid "Bridges" -msgstr "Hidak" +msgid "Edit current color - Right click the colored slider segment" +msgstr "Szín szerkesztése - Jobb klikk a színezett csúszkaszegmensre" -msgid "Bridges fan speed" -msgstr "Híd ventilátor sebesség" +msgid "Print mode" +msgstr "Nyomtatási mód" -msgid "Bridging angle" -msgstr "Hídkészítési szög" +msgid "Add extruder change - Left click" +msgstr "Extruder módosítás hozzáadása - Balra klikk" msgid "" -"Bridging angle override. If left to zero, the bridging angle will be " -"calculated automatically. Otherwise the provided angle will be used for all " -"bridges. Use 180° for zero angle." +"Add color change - Left click for predefined color or Shift + Left click for " +"custom color selection" msgstr "" -"Hídkészítési szög felülbírálása. Ha nullán hagyja, az áthidalási szög " -"automatikusan kiszámításra kerül. Ellenkező esetben a megadott szöget fogja " -"használni az összes híd esetében. Nulla szög esetén 180°-ot használjon." +"Színváltás hozzáadása - bal klikk előre definiált színhez vagy SHIFT+Bal " +"klikk egyéni színválasztáshoz" -msgid "Bridging volumetric" -msgstr "Áthidaló volumetrikus" +msgid "Add color change - Left click" +msgstr "Színváltás hozzáadása - Balra klikk" -msgid "Brim" -msgstr "Karima" +msgid "or press \"+\" key" +msgstr "nyomja meg a \"+\" billentyűt" -msgid "Brim separation gap" -msgstr "Karima elválasztó hézag" +msgid "Add another code - Ctrl + Left click" +msgstr "Újabb kód hozzáadása - CTRL+Bal klikk" -msgid "Brim type" -msgstr "Karima típus" +msgid "Add another code - Right click" +msgstr "Új kód hozzáadása - jobb klikk" -msgid "Brim width" -msgstr "Karima szélesség" +msgid "" +"The sequential print is on.\n" +"It's impossible to apply any custom G-code for objects printing " +"sequentually.\n" +"This code won't be processed during G-code generation." +msgstr "" +"A szekvenciális nyomtatás beindult.\n" +"A szekvenciális nyomtatású objektumokhoz nem lehet egyéni G-kódot " +"alkalmazni.\n" +"Ez a kód nem kerül feldolgozásra a G-kód generálásakor." -msgid "Browse" -msgstr "Tallózás" +msgid "Color change (\"%1%\")" +msgstr "Színváltás (\"%1%\")" -msgid "Brush" -msgstr "Ecset" +msgid "Color change (\"%1%\") for Extruder %2%" +msgstr "Színváltás (\"%1%\") az extrudernél %2%" -msgid "Brush shape" -msgstr "Ecset forma" +msgid "Pause print (\"%1%\")" +msgstr "Nyomtatás szünetelés (\"%1%\")" -msgid "Brush size" -msgstr "Ecset méret" +msgid "Custom template (\"%1%\")" +msgstr "Egyéni sablon (\"%1%\")" -msgid "buffer too small" -msgstr "buffer túl kicsi" +msgid "Extruder (tool) is changed to Extruder \"%1%\"" +msgstr "Extruder (tool) is changed to Extruder \"%1%\"" -msgid "Buttons And Text Colors Description" -msgstr "Gombok És Szövegszínek Leírása" +msgid "Note" +msgstr "Megjegyzés" msgid "" -"By default new Printer devices will be named as \"Printer N\" during its " -"creation.\n" -"Note: This name can be changed later from the physical printers settings" +"G-code associated to this tick mark is in a conflict with print mode.\n" +"Editing it will cause changes of Slider data." msgstr "" -"Alapértelmezés szerint az új nyomtatók „Printer N” nevet kapnak a " -"létrehozásuk során.\n" -"Megjegyzés: Ez a név később módosítható a fizikai nyomtató beállításainál" - -msgid "Camera" -msgstr "Kamera" - -msgid "Camera view" -msgstr "Kamera nézet" - -msgid "Cancel" -msgstr "Mégse" - -msgid "Cancel selected" -msgstr "Kijelölt visszavonása" - -msgid "Cancel upload" -msgstr "Feltöltés visszavonása" - -msgid "CANCELED" -msgstr "VISSZAVONVA" - -msgid "Cancelled" -msgstr "Visszavonva" - -msgid "Cancelling" -msgstr "Visszavonás" - -msgid "Cancelling..." -msgstr "Visszavonás..." +"Az ehhez a jelöléshez tartozó G-kód konfliktusban van a nyomtatási móddal.\n" +"Szerkesztése a csúszkák adatainak megváltozását okozza." msgid "" -"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." +"There is a color change for extruder that won't be used till the end of " +"print job.\n" +"This code won't be processed during G-code generation." msgstr "" -"Nem lehet kiszámítani a %1% extrudálási szélességet: %2%\" változó nem " -"elérhető." +"Van egy színváltás az extruderhez, amelyet a nyomtatási feladat végéig nem " +"használnak.\n" +"Ez a kód nem kerül feldolgozásra a G-kód generálásakor." msgid "" -"Cannot insert a new layer range after the current layer range.\n" -"Current layer range overlaps with the next layer range." +"There is an extruder change set to the same extruder.\n" +"This code won't be processed during G-code generation." msgstr "" -"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után. \n" -"Az aktuális rétegtartomány átfedésben van a következő rétegtartománnyal." +"Ugyanarra az extruderre van beállítva egy extruder-váltás.\n" +"Ez a kód nem kerül feldolgozásra a G-kód generálásakor." msgid "" -"Cannot insert a new layer range after the current layer range.\n" -"The next layer range is too thin to be split to two\n" -"without violating the minimum layer height." +"There is a color change for extruder that has not been used before.\n" +"Check your settings to avoid redundant color changes." msgstr "" -"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után. \n" -"A következő rétegtartomány túl vékony ahhoz, \n" -"hogy a minimális rétegmagasság megsértése nélkül ketté lehessen osztani." +"Van egy színváltás az extruder számára, amelyet korábban nem használtak.\n" +"Ellenőrizze a beállításokat a felesleges színváltások elkerülése érdekében." -msgid "" -"Cannot insert a new layer range between the current and the next layer " -"range.\n" -"The gap between the current layer range and the next layer range\n" -"is thinner than the minimum layer height allowed." -msgstr "" -"Nem lehet új rétegtartományt beszúrni az aktuális és a következő " -"rétegtartomány közé. \n" -"Az aktuális és a következő rétegtartomány közötti hézag vékonyabb, \n" -"mint a megengedett minimális rétegmagasság." +msgid "Delete tick mark - Left click or press \"-\" key" +msgstr "Pipa törlése - Bal klikk vagy nyomja meg a \"-\" billentyűt" -msgid "Cannot overwrite a system profile." -msgstr "Nem lehet rendszerprofilt felülírni." +msgid "Edit tick mark - Ctrl + Left click" +msgstr "Jelölés szerkesztése - CTRL+Bal klikk" -msgid "Cannot overwrite an external profile." -msgstr "Nem lehet külső profilt felülírni." +msgid "Edit tick mark - Right click" +msgstr "Pipa szerkesztése - Jobb klikk" -msgid "" -"Cannot proceed without support points! Add support points or disable support " -"generation." -msgstr "" -"Támasztó pontok nélkül nem lehet továbblépni! Adjon hozzá támasztó pontokat, " -"vagy tiltsa le a támasztógenerálást." +msgid "Extruder %d" +msgstr "Extruder %d" -msgid "Capabilities" -msgstr "Képességek" +msgid "active" +msgstr "aktív" -msgid "Capture a configuration snapshot" -msgstr "Pillanatfelvétel készítése az aktuális konfigurációról" +msgid "Switch code to Change extruder" +msgstr "Kapcsolókód az extruder cseréjéhez" -msgid "Case insensitive" -msgstr "Nagy- és kisbetű érzékeny" +msgid "Change extruder" +msgstr "Extruder cseréje" -msgid "Category" -msgstr "Kategória" +msgid "Change extruder (N/A)" +msgstr "Extruder cseréje (N/A)" -msgid "Center" -msgstr "Középre igazítás_" +msgid "Use another extruder" +msgstr "Másik extruder használata" -msgid "Center the print around the given center." -msgstr "A nyomtatás középre igazítása a megadott középpont körül." +msgid "used" +msgstr "használt" -msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" -msgstr "Tanúsítványfájlok (*.crt, *.pem)|*.crt;*.pem|Minden fájl|*.*" +msgid "Switch code to Color change (%1%) for:" +msgstr "Kódváltás színváltozásra (%1%) a következő esetekben:" -msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" -msgstr "\"%1%\" \"%2%\"-ra változtatása a \"%3%\" fizikai nyomtatóhoz." +msgid "Add color change (%1%) for:" +msgstr "Színváltozás hozzáadása (%1%):" -msgid "Change camera type (perspective, orthographic)" -msgstr "Kamera típusának módosítása (perspektivikus, ortografikus)" +msgid "Add color change" +msgstr "Színváltozás hozzáadása" -msgid "Change drainage hole diameter" -msgstr "Leeresztő furat átmérőjének megváltoztatása" +msgid "Add pause print" +msgstr "Nyomtatási szünet hozzáadása" -msgid "Change extruder" -msgstr "Extruder váltás" +msgid "Add custom template" +msgstr "Egyéni sablon felvétele" -msgid "Change Extruder" -msgstr "Extruder Váltás" +msgid "Add custom G-code" +msgstr "Egyéni G-kód felvétele" -msgid "Change extruder (N/A)" -msgstr "Extruder váltás (N/A)" +msgid "Edit color" +msgstr "Szín szerkesztése" -msgid "Change extruder color" -msgstr "Az Extruder színének változtatása" +msgid "Edit pause print message" +msgstr "Nyomtatási szünet üzenet szerkesztése" -msgid "Change Extruders" -msgstr "Extruderek Cseréje" +msgid "Edit custom G-code" +msgstr "Egyéni G-kód szerkesztése" -msgid "Change Option %s" -msgstr "%s Opció Megváltoztatása" +msgid "Delete color change" +msgstr "Színváltás törlése" -msgid "Change Part Type" -msgstr "Alkatrész Típus Módosítás" +msgid "Delete tool change" +msgstr "Eszközváltás törlése" -msgid "Change point head diameter" -msgstr "Tűfej átmérőjének módosítáa" +msgid "Delete pause print" +msgstr "Nyomtatási szünet törlése" -msgid "Changelog & Download" -msgstr "Változáslista & Letöltés" +msgid "Delete custom G-code" +msgstr "Egyéni G-kód törlése" -msgid "Changes for the critical options" -msgstr "Változtatások a kritikus opciókhoz" +msgid "Jump to height" +msgstr "Ugrás a magasságra" -msgid "Changing of an application language" -msgstr "Egy alkalmazás nyelvének megváltoztatása" +msgid "Hide ruler" +msgstr "Vonalzó elrejtése" -msgid "Check for application updates" -msgstr "Alkalmazás automatikus frissítése" +msgid "Show object height" +msgstr "Objektummagasság megjelenítése" -msgid "Check for Configuration Updates" -msgstr "Konfigurációs Frissítések Keresése" +msgid "Show object height on the ruler" +msgstr "Objektum magasságának megjelenítése a vonalzón" -msgid "Check for configuration updates" -msgstr "Konfigurációs frissítések keresése" +msgid "Show estimated print time" +msgstr "Becsült nyomtatási idő megjelenítése" -msgid "Choose a file to import bed texture from (PNG/SVG):" -msgstr "" -"Válasszon egy fájlt a tárgyasztal textúrájának importálásához (PNG/SVG):" +msgid "Show estimated print time on the ruler" +msgstr "A becsült nyomtatási idő megjelenítése a vonalzón" -msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Válasszon egy fájlt a szeleteléshez (STL/OBJ/AMF/3MF/PRUSA):" +msgid "Ruler mode" +msgstr "Vonalzó mód" -msgid "Choose an STL file to import bed model from:" -msgstr "Válasszon egy STL fájlt a tárgyasztal modelljének importálásához:" +msgid "Set ruler mode" +msgstr "Vonalzó mód beállítása" -msgid "Choose an STL file to import bed shape from:" -msgstr "Válasszon egy STL-fájlt a tárgyasztal alakzatának importálásához:" +msgid "Set extruder sequence for the entire print" +msgstr "Extruder sorrend beállítása a teljes nyomtatáshoz" -msgid "Choose one file (3MF/AMF):" -msgstr "Válasszon ki egy fájlt (3MF/AMF):" +msgid "Enter custom G-code used on current layer" +msgstr "Adja meg az aktuális rétegen használt egyéni G-kódot" -msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" -msgstr "Válasszon ki egy fájlt (GCODE/.GCO/.G/.ngc/NGC):" +msgid "Custom G-code on current layer (%1% mm)." +msgstr "Egyedi G-kód az aktuális rétegen (%1% mm)." -msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" -msgstr "Válasszon ki egy vagy több fájlt (STL/OBJ/AMF/3MF/PRUSA):" +msgid "Enter short message shown on Printer display when a print is paused" +msgstr "" +"A nyomtató kijelzőjén megjelenő rövid üzenet megadása a nyomtatás " +"szüneteltetésekor" -msgid "Choose SLA archive:" -msgstr "SLA archívum kiválasztása:" +msgid "Message for pause print on current layer (%1% mm)." +msgstr "Üzenet a nyomtatás szüneteltetéséhez az aktuális rétegen (%1% mm)." -msgid "Choose the type of firmware used by your printer." -msgstr "Válassza ki a nyomtató által használt firmware típusát." +msgid "Enter the move you want to jump to" +msgstr "Írja be a mozdulatot, amelyre ugrani szeretne" -msgid "Circle" -msgstr "Kör" +msgid "Enter the height you want to jump to" +msgstr "Adja meg az ugrani kívánt magasságot" -msgid "Circular" -msgstr "Körkörös" +msgid "The last color change data was saved for a single extruder printing." +msgstr "" +"Az utolsó színváltoztatási adatokat egyetlen extruderrel történő " +"nyomtatáshoz mentették el." -msgid "Clear Undo / Redo stack on new project" -msgstr "A Visszavonás/Mégis előzmények törlése új projektnél" +msgid "The last color change data was saved for a multi extruder printing." +msgstr "" +"Az utolsó színváltoztatási adatokat több extruderrel történő nyomtatáshoz " +"mentették el." + +msgid "Your current changes will delete all saved color changes." +msgstr "Az aktuális módosítások törlik az összes elmentett színmódosítást." + +msgid "Are you sure you want to continue?" +msgstr "Biztos, hogy folytatni akarja?" msgid "" -"Clear Undo / Redo stack on new project or when an existing project is loaded." +"Select YES if you want to delete all saved tool changes, \n" +"NO if you want all tool changes switch to color changes, \n" +"or CANCEL to leave it unchanged." msgstr "" -"A Visszavonás/Mégis előzmények törlése új projektnél vagy egy meglévő " -"projekt betöltésekor." +"Válassza az IGEN lehetőséget, ha törölni kívánja az összes mentett " +"eszközváltoztatást, \n" +"NEM, ha azt szeretné, hogy az összes szerszámváltoztatás színváltoztatásra " +"váltson, \n" +"vagy a CANCEL lehetőséget, ha változatlanul szeretné hagyni." -msgid "Click right mouse button to open/close History" -msgstr "Kattintson a jobb egérgombbal az előzmények megnyitásához/bezárásához" +msgid "Do you want to delete all saved tool changes?" +msgstr "Szeretné törölni az összes elmentett eszközváltoztatást?" -msgid "Click right mouse button to show arrangement options" +msgid "" +"The last color change data was saved for a multi extruder printing with tool " +"changes for whole print." msgstr "" -"Kattintson a jobb egérgombbal az elrendezési lehetőségek megjelenítéséhez" +"Az utolsó színváltoztatási adatokat a több extruderrel történő nyomtatáshoz " +"mentettük el, a teljes nyomtatásra vonatkozó szerszámváltásokkal együtt." -msgid "Click the icon to change the object printable property" +msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" -"Kattintson az ikonra az objektum nyomtatható tulajdonságának módosításához" - -msgid "Click the icon to change the object settings" -msgstr "Kattintson az ikonra az objektumbeálltások módosításához" +"Az aktuális módosítások törlik az összes elmentett extruder (szerszám) " +"módosítást." -msgid "Click to edit preset" -msgstr "Kattintson az előbeállítás szerkesztéséhez" +msgid "default" +msgstr "alapértelmezett" -msgid "Click to hide" -msgstr "Kattintás az elrejtéshez" +msgid "Set extruder sequence" +msgstr "Extruder sorrend beállítása" -msgid "Click to show" -msgstr "Kattintás a megjelenítéshez" +msgid "Set extruder change for every" +msgstr "Minden extruder váltás beállítása" -msgid "Clip multi-part objects" -msgstr "Több részből álló objektumok vágása" +msgid "layers" +msgstr "rétegek" -msgid "Clipping of view" -msgstr "A nézet vágása" +msgid "Set extruder(tool) sequence" +msgstr "Extruder(szerszám) sorrend beállítása" -msgid "Close" -msgstr "Bezárás" +msgid "Remove extruder from sequence" +msgstr "Extruder eltávolítása a szekvenciából" -msgid "Close holes" -msgstr "Lyukak bezárása" +msgid "Add extruder to sequence" +msgstr "Extruder hozzáadása a szekvenciához" -msgid "Closing distance" -msgstr "Zárótávolság" +msgid "default value" +msgstr "alapértelmezett érték" -msgid "Closing radius" -msgstr "Zárási sugár" +msgid "parameter name" +msgstr "paraméter neve" -msgid "Collapse sidebar" -msgstr "&Az oldalsáv összecsukása" +msgid "N/A" +msgstr "N/A" -msgid "Collapse/Expand the sidebar" -msgstr "Az oldalsáv összecsukás/kibontása" +msgid "%s doesn't support percentage" +msgstr "%s nem támogatja a százalékos arányt" -msgid "Color" -msgstr "Szín" +msgid "Invalid numeric input." +msgstr "Érvénytelen numerikus bevitel." -msgid "Color change" -msgstr "Szín változtatás" +msgid "" +"Input value is out of range\n" +"Are you sure that %s is a correct value and that you want to continue?" +msgstr "" +"A bemeneti érték a tartományon kívül van\n" +"Biztos benne, hogy %s helyes érték, és folytatni szeretné a műveletet?" -msgid "Color change (\"%1%\")" -msgstr "Színváltás (\"%1%\")" +msgid "Parameter validation" +msgstr "Paraméter érvényesítés" -msgid "Color change (\"%1%\") for Extruder %2%" -msgstr "Színváltás (\"%1%\") az Extruder %2% esetében" +msgid "Input value is out of range" +msgstr "A bemeneti érték a tartományon kívül van" -msgid "Color Change G-code" -msgstr "G-kód Színváltás" +msgid "" +"The infill / perimeter encroachment can't be higher than half of the " +"perimeter width.\n" +"Are you sure to use this value?" +msgstr "" +"A kitöltés/körülhatárolás nem lehet magasabb, mint a kerületi szélesség " +"fele.\n" +"Biztos, hogy ezt az értéket kell használni?" -msgid "Color change G-code" -msgstr "Színváltás G-kód" - -msgid "Color changes" -msgstr "Szín váltások" +msgid "" +"Do you mean %s%% instead of %s %s?\n" +"Select YES if you want to change this value to %s%%, \n" +"or NO if you are sure that %s %s is a correct value." +msgstr "" +"Nem a(z) %s%% helyett %s %s-ra gondol?\n" +"Válassza az IGEN lehetőséget, ha ezt az értéket %s%% kívánja módosítani, \n" +"vagy a NEM-et, ha biztos benne, hogy %s %s a helyes érték." -msgid "Color Print" -msgstr "Színes nyomtatás" +msgid "" +"Invalid input format. Expected vector of dimensions in the following format: " +"\"%1%\"" +msgstr "" +"Érvénytelen bemeneti formátum. Várhatóan a következő formátumú " +"dimenzióvektor: \"%1%\"" -msgid "Colorprint height" -msgstr "Színes nyomtatási magasság" +msgid "Flash!" +msgstr "Égetés!" -msgid "Combine infill every" -msgstr "Vonja össze a kitöltést minden" +msgid "Flashing in progress. Please do not disconnect the printer!" +msgstr "Égetés folyamatban. Kérjük, ne válassza le a nyomtatót!" -msgid "Combine infill every n layers" -msgstr "Vonja össze a kitöltést minden n rétegben" +msgid "Flashing failed" +msgstr "Égetés sikertelen" -msgid "Commands" -msgstr "Parancsok" +msgid "Flashing succeeded!" +msgstr "Égetés sikerült!" -msgid "Comment:" -msgstr "Komment:" +msgid "Flashing failed. Please see the avrdude log below." +msgstr "Égetés nem sikerült. Kérjük, tekintse meg az alábbi avrdude naplót." -msgid "Compare Presets" -msgstr "Előbeállítások Összehasonlítása" +msgid "Flashing cancelled." +msgstr "Égetés törölve." -msgid "Compare presets" -msgstr "Előbeállítások összehasonlítása" +msgid "" +"This firmware hex file does not match the printer model.\n" +"The hex file is intended for: %s\n" +"Printer reported: %s\n" +"\n" +"Do you want to continue and flash this hex file anyway?\n" +"Please only continue if you are sure this is the right thing to do." +msgstr "" +"Ez a firmware hex fájl nem felel meg a nyomtató modelljének.\n" +"A hexafájl a következőkhöz készült: %s\n" +"A nyomtató jelentése: %s\n" +"\n" +"Szeretné folytatni és mégis feltölteni ezt a hexafájlt?\n" +"Kérjük, csak akkor folytassa, ha biztos benne, hogy ez a helyes lépés." -msgid "Compare this preset with some another" -msgstr "Ennek az előbeállításnak az összehasonlítása egy másikkal" +msgid "" +"Multiple %s devices found. Please only connect one at a time for flashing." +msgstr "" +"Több %s eszközt találtunk. Kérjük, az égetéshez egyszerre csak egyet " +"csatlakoztasson." -msgid "Compared presets has different printer technology" +msgid "" +"The %s device was not found.\n" +"If the device is connected, please press the Reset button next to the USB " +"connector ..." msgstr "" -"Az összehasonlított előbeállítások különböző nyomtatási technológiával " -"rendelkeznek" +"A %s eszközt nem találtuk.\n" +"Ha az eszköz csatlakoztatva van, kérjük, nyomja meg az USB-csatlakozó " +"melletti Reset gombot ..." -msgid "Compatible print profiles" -msgstr "Kompatibilis nyomtatási profilok" +msgid "The %s device could not have been found" +msgstr "A %s eszközt nem sikerült megtalálni" -msgid "Compatible print profiles condition" -msgstr "Nyomtatási profil kompatibilitás feltétle" +msgid "Error accessing port at %s: %s" +msgstr "Hiba a port elérésekor %s: %s" -msgid "Compatible printers" -msgstr "Kompatibilis nyomtatók" +msgid "Error: %s" +msgstr "Hiba: %s" -msgid "Compatible printers condition" -msgstr "Nyomtató kompatibilitás feltétele" +msgid "Firmware flasher" +msgstr "Firmware égető" -msgid "Complete individual objects" -msgstr "Egyedi objektumok befejezése" +msgid "Firmware image:" +msgstr "Firmware kép:" -msgid "COMPLETED" -msgstr "KÉSZ" +msgid "Browse" +msgstr "Böngészés" -msgid "Completed" -msgstr "Kész" +msgid "Serial port:" +msgstr "Soros port:" -msgid "compression failed" -msgstr "becsomagolás sikertelen" +msgid "Autodetected" +msgstr "Automatikusan észlelt" -msgid "Concentric" -msgstr "Koncentrikus" +msgid "Rescan" +msgstr "Újraolvasás" -msgid "Configuration &Assistant" -msgstr "Konfigurációs Segéd" +msgid "Progress:" +msgstr "Folyamat:" -msgid "Configuration &Wizard" -msgstr "Konfigurációs Varázsló" +msgid "Status:" +msgstr "Státusz:" -msgid "Configuration Assistant" -msgstr "Konfigurációs Segéd" +msgid "Ready" +msgstr "Kész" -msgid "" -"Configuration bundle was loaded, however some configuration values were not " -"recognized." -msgstr "" -"A konfigurációs csomag betöltődött, azonban néhány konfigurációs értéket nem " -"sikerült felismerni." +msgid "Advanced: Output log" +msgstr "Haladó: Kimeneti napló" msgid "" -"Configuration file \"%1%\" was loaded, however some configuration values " -"were not recognized." +"Are you sure you want to cancel firmware flashing?\n" +"This could leave your printer in an unusable state!" msgstr "" -"A \"%1%\" konfigurációs fájl betöltődött, azonban néhány konfigurációs " -"értéket nem sikerült felismerni." - -msgid "Configuration is edited in ConfigWizard" -msgstr "A konfiguráció szerkesztése a ConfigWizardban történik_" +"Biztos, hogy le akarja mondani a firmware égetését?\n" +"Ez használhatatlan állapotba hozhatja a nyomtatót!" -msgid "Configuration is editing from ConfigWizard" -msgstr "Konfiguráció szerkesztése a ConfigWizardból_" +msgid "Confirmation" +msgstr "Megerősítés" -msgid "Configuration notes" -msgstr "Konfiguráció megjegyzések" +msgid "Cancelling..." +msgstr "Visszavonás..." -msgid "Configuration Snapshots" -msgstr "Konfigurációs pillanatfelvételek" +msgid "FreePySCAD : script engine for FreeCAD" +msgstr "FreePySCAD : szkript motor a FreeCAD-hez" -msgid "Configuration update" -msgstr "Konfiguráció frissítés" +msgid "New" +msgstr "Új" -msgid "Configuration update is available" -msgstr "A konfiguráció frissítése elérhető" +msgid "Load" +msgstr "Betöltés" -msgid "Configuration update is available." -msgstr "A konfiguráció frissítése elérhető." +msgid "Save" +msgstr "Mentés" -msgid "Configuration updates" -msgstr "Konfigurációs frissítések" +msgid "Quick Save" +msgstr "Gyors mentés" msgid "" -"Configuration Updates causes a lost of preset modification.\n" -"So, check unsaved changes and save them if necessary." +"What to do with the result? insert it into the existing plater or replacing " +"the current plater by a new one?" msgstr "" -"A Konfigurációs frissítések hatására az előre beállított módosítások " -"elvesznek. \n" -"Ezért ellenőrizze a nem mentett módosításokat, és szükség esetén mentse el " -"azokat." +"Mit tegyünk az eredménnyel? Illesszük be a meglévő platerbe, vagy cseréljük " +"le a jelenlegi platert egy újjal?" -msgid "Configuration Wizard" -msgstr "Konfigurációs Varázsló" +msgid "Choose one file (py):" +msgstr "Válassz egy fájlt (py):" -msgid "Confirmation" -msgstr "Megerősítés" +msgid "Tool position" +msgstr "Eszköz pozíció" -msgid "Connection of the support sticks and junctions" -msgstr "A tartópálcák és a csomópontok csatlakoztatása" +msgid "Generating toolpaths" +msgstr "Szerszámpályák generálása" -msgid "Connection to PrusaLink works correctly." -msgstr "A kapcsolat a PrusaLinkkel megfelelően működik." +msgid "Generating vertex buffer" +msgstr "Vertex puffer generálása" -msgid "Continue" -msgstr "Folytatás" +msgid "Generating index buffers" +msgstr "Indexpufferek generálása" -msgid "continue" -msgstr "folytatás" +msgid "Click to hide" +msgstr "Kattints az elrejtéshez" -msgid "Continue and import newer configuration?" -msgstr "Folytatás és az újabb konfiguráció importálása?" +msgid "Click to show" +msgstr "Kattints a megjelenítéshez" -msgid "Continue and install configuration updates?" -msgstr "Folytassa és telepítse a konfigurációs frissítéseket?" +msgid "up to" +msgstr "legfeljebb" -msgid "Continue to activate a configuration snapshot %1%?" -msgstr "Folytatja a konfigurációs pillanatkép aktiválását: %1%?" +msgid "above" +msgstr "fentebb" -msgid "" -"Controls the bridge type between two neighboring pillars. Can be zig-zag, " -"cross (double zig-zag) or dynamic which will automatically switch between " -"the first two depending on the distance of the two pillars." -msgstr "" -"Két szomszédos pillér közötti híd típusát határozza meg. Lehet cikk-cakk, " -"kereszt (dupla cikk-cakk) vagy dinamikus, amely automatikusan vált az első " -"kettő között a két pillér távolságától függően." +msgid "from" +msgstr "-tól, -től" -msgid "Convert from imperial units" -msgstr "Konvertálás angolszász mértékegységről" +msgid "to" +msgstr "-nak, -nek" -msgid "Convert from meters" -msgstr "Konvertálás metrikus mértékegységről" +msgid "Feature type" +msgstr "Funkció típusa" -msgid "Cooling" -msgstr "Hűtés" +msgid "Time" +msgstr "Idő" -msgid "Cooling tube length" -msgstr "Hűtőcső hossza" +msgid "Percentage" +msgstr "Százalék" -msgid "Cooling tube position" -msgstr "Hűtőcső helyzete" +msgid "Height (mm)" +msgstr "Magasság (mm)" -msgid "Copies of the selected object" -msgstr "A kijelölt objektum másolatai" +msgid "Width (mm)" +msgstr "Szélesség (mm)" -msgid "Copy" -msgstr "Másolás" +msgid "Speed (mm/s)" +msgstr "Sebesség (mm/s)" -msgid "Copy selection to clipboard" -msgstr "Kijelöltek másolása a vágólapra" +msgid "Fan Speed (%)" +msgstr "Ventilátor sebesség (%)" -msgid "Copy to clipboard" -msgstr "Másolás a vágólapra" +msgid "Layer Time" +msgstr "Rétegidő" -msgid "Copy to Clipboard" -msgstr "Másolás a Vágólapra" +msgid "Layer Time (log)" +msgstr "Rétegidő (napló)" -msgid "Copy Version Info" -msgstr "Verzióinformáció Másolása" +msgid "Chronology" +msgstr "Kronológia" -msgid "Copying of file %1% to %2% failed: %3%" -msgstr "A %1% fájl másolása %2%-ra nem sikerült: %3%" +msgid "Volumetric flow rate (mm³/s)" +msgstr "Térfogatáram (mm³/mp)" -msgid "" -"Copying of the temporary G-code has finished but the exported code couldn't " -"be opened during copy check. The output G-code is at %1%.tmp." -msgstr "" -"Az ideiglenes G-kód másolása befejeződött, de az exportált kódot nem " -"lehetett megnyitni a másolásellenőrzés során. A kimeneti G-kód %1%.tmp." +msgid "Tool" +msgstr "Eszköz" -msgid "" -"Copying of the temporary G-code has finished but the original code at %1% " -"couldn't be opened during copy check. The output G-code is at %2%.tmp." -msgstr "" -"Az ideiglenes G-kód másolása befejeződött, de az eredeti, %1% kódot nem " -"lehetett megnyitni a másolásellenőrzés során. A kimeneti G-kód %2%.tmp." +msgid "Filament" +msgstr "Nyomtatószál" -msgid "Copying of the temporary G-code to the output G-code failed" -msgstr "Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült" +msgid "Color Print" +msgstr "Színes nyomtatás" -msgid "" -"Copying of the temporary G-code to the output G-code failed. Maybe the SD " -"card is write locked?\n" -"Error message: %1%" -msgstr "" -"Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült. Lehet, hogy az " -"SD kártya írásvédett?\n" -"Hibaüzenet: %1%" +msgid "Temperature" +msgstr "Hőfok" -msgid "" -"Copying of the temporary G-code to the output G-code failed. There might be " -"problem with target device, please try exporting again or using different " -"device. The corrupted output G-code is at %1%.tmp." -msgstr "" -"Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült. Probléma lehet " -"a céleszközzel. Kérjük, próbálkozzon újra az exportálással, vagy használjon " -"másik eszközt. A sérült kimeneti G-kód %1%.tmp." +msgid "Extruder" +msgstr "Extruder" -msgid "Copyright" -msgstr "Szerzői jog" +msgid "Default color" +msgstr "Alapértelmezett szín" -msgid "Correction for expansion" -msgstr "Terjeszkedés miatti korrekció" +msgid "default color" +msgstr "alapértelmezett szín" -msgid "Correction for expansion in X axis" -msgstr "Terjeszkedés miatti korrekció az X tengelyen" +msgid "Color change" +msgstr "Színváltozás" -msgid "Correction for expansion in Y axis" -msgstr "Terjeszkedés miatti korrekció az Y tengelyen" +msgid "Print" +msgstr "Nyomtatás" -msgid "Correction for expansion in Z axis" -msgstr "Terjeszkedés miatti korrekció az Z tengelyen" +msgid "Pause" +msgstr "Szünet" -msgid "Corrections" -msgstr "Korrekciók" +msgid "Event" +msgstr "Esemény" -msgid "Cost" -msgstr "Költség" +msgid "Remaining time" +msgstr "Hátralévő idő" -msgid "Cost (money)" -msgstr "Költség (pénz)" +msgid "Duration" +msgstr "Időtartam" -msgid "Could not arrange model objects! Some geometries may be invalid." -msgstr "" -"Nem sikerült elrendezni a modell objektumokat! Egyes geometriák " -"érvénytelenek lehetnek." +msgid "Travel" +msgstr "Utazás" -msgid "Could not connect to Prusa SLA" -msgstr "Nem sikerült csatlakozni a Prusa SLA-hoz" +msgid "Movement" +msgstr "Mozgás" -msgid "Could not connect to PrusaLink" -msgstr "Nem sikerült csatlakozni a PrusaLinkhez" +msgid "Extrusion" +msgstr "Extrudálás" -msgid "Could not get a valid Printer Host reference" -msgstr "Nem sikerült érvényes nyomtató gazdagép hivatkozást szerezni" +msgid "Retraction" +msgstr "Visszahúzás" -msgid "Could not get resources to create a new connection" -msgstr "Nem állnak rendelkezésre erőforrások egy új kapcsolat létesítéséhez" +msgid "Wipe" +msgstr "Törölés" -msgid "" -"Cover the top contact layer of the supports with loops. Disabled by default." -msgstr "" -"Fedje le a támaszok felső érintkező rétegét hurkokkal. Alapértelmezés " -"szerint kikapcsolva." +msgid "Options" +msgstr "Opciók" -msgid "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." -msgstr "" -"A szelet hézagzárási sugár 2x-esénél kisebb hézagok a háromszögháló " -"szeletelése során feltöltésre kerülnek. A hézagzárási művelet csökkentheti a " -"végső nyomtatási felbontást, ezért célszerű az értékét ésszerűen alacsonyan " -"tartani." +msgid "Retractions" +msgstr "Visszahúzások" -msgid "CRC-32 check failed" -msgstr "CRC32 ellenőrzés sikertelen" +msgid "Deretractions" +msgstr "Visszavonások" -msgid "Create pad around object and ignore the support elevation" -msgstr "" -"Hozzon létre párnát az objektum körül és hagyja figyelmen kívül a támasztók " -"magasságát" +msgid "Tool changes" +msgstr "Szerszámváltások" -msgid "Creating a new project" -msgstr "Új projekt létrehozása" +msgid "Color changes" +msgstr "Színváltások" -msgid "Creating a new project while some presets are modified." -msgstr "Új projekt létrehozása néhány előbeállítás módosítása közben." +msgid "Print pauses" +msgstr "Nyomtatási szünetek" -msgid "Creating a new project while the current project is modified." -msgstr "Új projekt létrehozása a jelenlegi projekt módosítása közben." +msgid "Custom G-codes" +msgstr "Egyedi G-kódok" -msgid "Critical angle" -msgstr "Kritikus szög" +msgid "Printer" +msgstr "Nyomtató" -msgid "Critical error" -msgstr "Kritikus hiba" +msgid "Print settings" +msgstr "Nyomtatási beállítások" -msgid "Cross" -msgstr "Kereszt" +msgid "Estimated printing time" +msgstr "Becsült nyomtatási idő" -msgid "Ctrl + Mouse wheel" -msgstr "Ctrl + Egér görgő" +msgid "Normal mode" +msgstr "Normál mód" -msgid "Cubic" -msgstr "Kocka" +msgid "Stealth mode" +msgstr "Halk mód" -msgid "Current preset is inherited from" -msgstr "Az aktuális előbeállítás innen öröklődik" +msgid "Show stealth mode" +msgstr "Halk mód megjelenítése" -msgid "Current preset is inherited from the default preset." -msgstr "Az aktuális előbeállítás az alapértelmezett előbeállítástól öröklődik." +msgid "Show normal mode" +msgstr "Normál mód megjelenítése" -msgid "Current version:" -msgstr "Aktuális verzió:" +msgid "Variable layer height" +msgstr "Változó rétegmagasság" -msgid "Custom" -msgstr "Egyedi" +msgid "Left mouse button:" +msgstr "Bal egérgomb:" -msgid "" -"Custom CA certificate file can be specified for HTTPS OctoPrint connections, " -"in crt/pem format. If left blank, the default OS CA certificate repository " -"is used." -msgstr "" -"Egyedi hitelesítésszolgáltatói (CA) tanúsítványfájl adható meg a HTTPS " -"OctoPrint kapcsolatokhoz, crt/pem formátumban.\n" -"\n" -"Ha üresen hagyja, akkor az operációs rendszer alapértelmezett " -"hitelesítésszolgáltatói (CA) tanúsítványtárát használja." +msgid "Add detail" +msgstr "Részlet hozzáadása" -msgid "Custom G-code" -msgstr "Egyéni G-kód" +msgid "Right mouse button:" +msgstr "Jobb egérgomb:" -msgid "Custom G-code on current layer (%1% mm)." -msgstr "Egyedi G-kód az aktuális rétegen (%1% mm)." +msgid "Remove detail" +msgstr "Részlet eltávolítása" -msgid "Custom G-codes" -msgstr "Egyedi G-kódok" +msgid "Shift + Left mouse button:" +msgstr "SHIFT+Bal egérgomb:" -msgid "Custom Printer" -msgstr "Egyedi Nyomtató" +msgid "Reset to base" +msgstr "Alaphelyzetbe állítás" -msgid "Custom Printer Setup" -msgstr "Egyedi Nyomtató Beállítás" +msgid "Shift + Right mouse button:" +msgstr "SHIFT+Jobb egérgomb:" -msgid "Custom printer was installed and it will be activated." -msgstr "Egyedi nyomtató lett telepítve, és aktiválásra került." +msgid "Smoothing" +msgstr "Simítás" -msgid "Custom profile name:" -msgstr "Egyéni profil neve:" +msgid "Mouse wheel:" +msgstr "Egérgörgő:" -msgid "" -"Custom supports, seams and multimaterial painting were removed after " -"repairing the mesh." -msgstr "" -"Az egyedi támasztékok, varratok és a többanyagú festés eltávolításra került " -"háló javítása után." +msgid "Increase/decrease edit area" +msgstr "Szerkesztési terület növelése/csökkentése" -msgid "Custom template (\"%1%\")" -msgstr "Egyedi sablon (\"%1%\")" +msgid "Adaptive" +msgstr "Adaptív" -msgid "Cut" -msgstr "Vágás" +msgid "Quality / Speed" +msgstr "Minőség / sebesség" -msgid "Cut by Plane" -msgstr "Vágás Síkkal" +msgid "Higher print quality versus higher print speed." +msgstr "Magasabb nyomtatási minőség a nagyobb sebességgel szemben." -msgid "Cut model at the given Z." -msgstr "A modellt elvágása egy megadott Z-nél." +msgid "Smooth" +msgstr "Sima" -msgid "D&eselect All" -msgstr "Összes Kijelölés Megszüntetése" +msgid "Radius" +msgstr "Sugár" -msgid "Dark mode (experimental)" -msgstr "Sötét mód (kísérleti)" +msgid "Keep min" +msgstr "Tartsa min" -msgid "Data directory" -msgstr "Adatkönyvtár" +msgid "Reset" +msgstr "Visszaállítás" -msgid "Deadzone:" -msgstr "Holtzóna:" +msgid "Variable layer height - Manual edit" +msgstr "Változó rétegmagasság - Kézi szerkesztés" -msgid "decompression failed or archive is corrupted" -msgstr "kicsomagolás sikertelen, vagy az archívum sérült" +msgid "An object outside the print area was detected." +msgstr "Nyomtatási területen kívül eső tárgy észlelve." -msgid "Decrease Instances" -msgstr "Példányszám Csökkentése" +msgid "A toolpath outside the print area was detected." +msgstr "Nyomtatási területen kívül eső szerszámpálya észlelve." -msgid "default" -msgstr "alapértelmezett" +msgid "SLA supports outside the print area were detected." +msgstr "A nyomtatási területen kívüli SLA-támaszok észlelve." -msgid "Default" -msgstr "Alapértelmezett" +msgid "Some objects are not visible." +msgstr "Néhány tárgy nem látható." msgid "" -"Default base angle for infill orientation. Cross-hatching will be applied to " -"this. Bridges will be infilled using the best direction Slic3r can detect, " -"so this setting does not affect them." +"An object outside the print area was detected.\n" +"Resolve the current problem to continue slicing." msgstr "" -"Alapértelmezett bázisszög a kitöltés tájolásához. Erre kereszt-sorozat lesz " -"alkalmazva. A hidak a Slic3r által meghatározott lehető legjobb irányban " -"lesznek kitöltve, így ez a beállítás nem befolyásolja azokat." +"A nyomtatási területen kívül eső tárgy észlelve.\n" +"A szeletelés folytatásához oldja meg a problémát." -msgid "Default color" -msgstr "Alapértelmezett szín" +msgid "Seq." +msgstr "Sorozat." -msgid "default color" -msgstr "alapértelmezett szín" +msgid "Variable layer height - Reset" +msgstr "Változó rétegmagasság - Visszaállítás" -msgid "Default extrusion width" -msgstr "Alapértelmezett extrudálási szélesség" +msgid "Variable layer height - Adaptive" +msgstr "Változó rétegmagasság - Adaptív" -msgid "default filament profile" -msgstr "alapértelmezett filament profil" +msgid "Variable layer height - Smooth all" +msgstr "Változó rétegmagasság - Simítás" -msgid "Default filament profile" -msgstr "Alapértelmezett filament profil" +msgid "Mirror Object" +msgstr "Tárgy tükrözése" -msgid "" -"Default filament profile associated with the current printer profile. On " -"selection of the current printer profile, this filament profile will be " -"activated." -msgstr "" -"Az aktuális nyomtatóprofilhoz tartozó alapértelmezett filament profil. Az " -"aktuális nyomtatóprofil kiválasztásakor ez a filament profil aktiválódik." +msgid "Gizmo-Move" +msgstr "Gizmo Mozgás" -msgid "default print profile" -msgstr "alapértelmezett nyomtató profil" +msgid "Gizmo-Rotate" +msgstr "Gizmo forgatás" -msgid "Default print profile" -msgstr "Alapértelmezett nyomtatási profil" +msgid "Move Object" +msgstr "Tárgy mozgatása" -msgid "" -"Default print profile associated with the current printer profile. On " -"selection of the current printer profile, this print profile will be " -"activated." -msgstr "" -"Az aktuális nyomtatóprofilhoz tartozó alapértelmezett nyomtatási profil. Az " -"aktuális nyomtatóprofil kiválasztásakor ez a nyomtatási profil aktiválódik." +msgid "Switch to Settings" +msgstr "Váltson a Beállításokra" -msgid "default SLA material profile" -msgstr "alapértelmezett SLA anyag profil" +msgid "Print Settings Tab" +msgstr "Nyomtatási beállítások lap" -msgid "Default SLA material profile" -msgstr "Alapértelmezett SLA anyagprofil" +msgid "Filament Settings Tab" +msgstr "Szálbeállítások lap" -msgid "default SLA print profile" -msgstr "alapértelmezett SLA nyomtatási profil" +msgid "Material Settings Tab" +msgstr "Anyagbeállítások lap" -msgid "default value" -msgstr "alapértelmezett érték" +msgid "Printer Settings Tab" +msgstr "Nyomtató beállítások lap" -msgid "Define a custom printer profile" -msgstr "Egyéni nyomtatóprofil létrehozása" +msgid "Undo History" +msgstr "Visszavonás előzmények" -msgid "Delay after unloading" -msgstr "Várakozás a kiürítés után" +msgid "Redo History" +msgstr "Újraindítás előzmények" -msgid "Delete" -msgstr "Törlés" +msgid "Undo %1$d Action" +msgid_plural "Undo %1$d Actions" +msgstr[0] "%1$d művelet visszavonása" +msgstr[1] "%1$d műveletek visszavonása" -msgid "delete" -msgstr "törlés" +msgid "Redo %1$d Action" +msgid_plural "Redo %1$d Actions" +msgstr[0] "%1$d művelet újraindítása" +msgstr[1] "%1$d műveletek újraindítása" -msgid "Delete &All" -msgstr "Összes törlése" +msgid "Search" +msgstr "Keresés" -msgid "Delete all" -msgstr "Összes törlése" +msgid "Enter a search term" +msgstr "Adjon meg keresési kifejezést" -msgid "Delete All Instances from Object" -msgstr "Minden példány törlése az objektumból" +msgid "Arrange options" +msgstr "Opciók elrendezése" -msgid "Delete All Objects" -msgstr "Az Összes Objektum Törlése" +msgid "Press %1%left mouse button to enter the exact value" +msgstr "Nyomja meg az %1% bal egérgombot a pontos érték megadásához" -msgid "Delete color change" -msgstr "Színváltás törlése" +msgid "Spacing" +msgstr "Távolság" -msgid "Delete color change marker for current layer" -msgstr "Színváltási jelölő eltávolítása az aktuális rétegről" +msgid "Enable rotations (slow)" +msgstr "Forgások engedélyezése (lassú)" -msgid "Delete custom G-code" -msgstr "Egyedi G-kód törlése" +msgid "Arrange" +msgstr "Elrendezés" -msgid "Delete drainage hole" -msgstr "Leeresztő furat törlése" +msgid "Add..." +msgstr "Hozzáad..." -msgid "Delete Height Range" -msgstr "Magasságtartomány Törlése" +msgid "Delete" +msgstr "Töröl" -msgid "Delete Instance" -msgstr "Példány törlése" +msgid "Delete all" +msgstr "Töröljön mindent" -msgid "Delete Object" -msgstr "Objektum Törlése" +msgid "Arrange selection" +msgstr "Válogatás rendezése" -msgid "Delete Option %s" -msgstr "%s Opció Törlése" +msgid "Click right mouse button to show arrangement options" +msgstr "" +"Kattintson az egér jobb gombjával az elrendezési lehetőségek megjelenítéséhez" -msgid "Delete pause print" -msgstr "Nyomtatási szünet törlése" +msgid "Copy" +msgstr "Másolás" -msgid "Delete Physical Printer" -msgstr "Fizikai Nyomtató Törlése" +msgid "Paste" +msgstr "Beillesztés" -msgid "Delete physical printer" -msgstr "Fizikai nyomtató törlése" +msgid "Add instance" +msgstr "Példa hozzáadása" -msgid "Delete Selected" -msgstr "Kijelöltek törlése" +msgid "Remove instance" +msgstr "Példa eltávolítása" -msgid "Delete selected" -msgstr "Kijelöltek törlése" +msgid "Split to objects" +msgstr "Tárgyakra osztás" -msgid "Delete Selected Item" -msgstr "Kijelölt elem törlése" +msgid "Split to parts" +msgstr "Részekre osztva" -msgid "Delete Selected Objects" -msgstr "Kijelölt Objektumok Törlése" +msgid "Undo" +msgstr "Visszavonás" -msgid "Delete Settings" -msgstr "Beállítások Törlése" +msgid "Click right mouse button to open/close History" +msgstr "Kattintson a jobb egérgombal az Előzmények megnyitásához/beállításához" -msgid "Delete Subobject" -msgstr "Alobjektum törlése" +msgid "Next Undo action: %1%" +msgstr "Következő visszavonás: %1%" -msgid "Delete support point" -msgstr "Támasztó pont törlése" +msgid "Redo" +msgstr "Mégis" -msgid "Delete this preset" -msgstr "Előbeálltás törlése" +msgid "Next Redo action: %1%" +msgstr "Következő művelet: %1%" -msgid "Delete this preset from this printer device" -msgstr "Az előbeállítás törlése erről a nyomtatóeszközről" +msgid "Selection-Add from rectangle" +msgstr "Kiválasztás-Hozzáadás téglalapból" -msgid "Delete tick mark - Left click or press \"-\" key" -msgstr "Jelölő törlése - Bal kattintás vagy \"-\" billentyű" +msgid "Selection-Remove from rectangle" +msgstr "Kiválasztás-Eltávolítás a téglalapból" -msgid "Delete tool change" -msgstr "Szerszám törlése" +msgid "Cut" +msgstr "Vágás" -msgid "Deletes all objects" -msgstr "Az összes objektum törlése" +msgid "in" +msgstr "be" -msgid "Deletes the current selection" -msgstr "Az összes kijelölt objektum törlése" +msgid "Keep upper part" +msgstr "Tartsa a felső részt" -msgid "Density" -msgstr "Sűrűség" +msgid "Keep lower part" +msgstr "Tartsa az alsó részt" -msgid "Density of internal infill, expressed in the range 0% - 100%." -msgstr "A belső kitöltés sűrűsége, 0% és 100% között kifejezve." +msgid "Rotate lower part upwards" +msgstr "Forgassa az alsó részt felfelé" -msgid "Density of the first raft or support layer." -msgstr "A támasz vagy tutaj első rétegének sűrűsége." +msgid "Perform cut" +msgstr "Vágás elvégzése" -msgid "Dependencies" -msgstr "Függőségek" +msgid "Paint-on supports" +msgstr "Festett támaszok" -msgid "Deretraction Speed" -msgstr "Betöltési Sebesség" +msgid "Clipping of view" +msgstr "Nézet vágása" -msgid "Deretractions" -msgstr "Előretolások_" +msgid "Reset direction" +msgstr "Irány visszaállítása" -msgid "Descriptive name for the printer" -msgstr "A nyomtató leíró elnevezése" +msgid "Brush size" +msgstr "Ecset mérete" -msgid "Deselect all" -msgstr "Összes kijelölés megszüntetése" +msgid "Brush shape" +msgstr "Ecset alakja" -msgid "Deselect by rectangle" -msgstr "Kijelölés megszüntetése téglalappal" +msgid "Left mouse button" +msgstr "Bal egérgomb" -msgid "Deselects all objects" -msgstr "Az összes objektum kijelölésének megszüntetése" +msgid "Enforce supports" +msgstr "Támogatás kikényszerítése" -msgid "Desktop Integration" -msgstr "Asztal integráció" +msgid "Right mouse button" +msgstr "Jobb egérgomb" -msgid "Desktop integration failed." -msgstr "Az asztal integrációja nem sikerült." +msgid "Block supports" +msgstr "Blokktámaszok" -msgid "Desktop integration was successful." -msgstr "Az asztal integrációja sikeres volt." +msgid "Shift + Left mouse button" +msgstr "SHIFT+Bal klikk" -msgid "Detach from system preset" -msgstr "Leválasztás a rendszer-előbeállításokról" +msgid "Remove selection" +msgstr "Kijelölés eltávolítása" -msgid "Detach preset" -msgstr "Előbeállítás leválasztása" +msgid "Remove all selection" +msgstr "Minden kijelölés eltávolítása" -msgid "Detached" -msgstr "Független_" +msgid "Circle" +msgstr "Kör" -msgid "" -"Detect unconnected parts in the given model(s) and split them into separate " -"objects." -msgstr "" -"Az összekapcsolatlan részek felismerése és különálló objektumokra való " -"bontása az adott modell(ek)ben." +msgid "Sphere" +msgstr "Gömb" -msgid "Detected advanced data" -msgstr "Fejlett adatok érzékelve" +msgid "Autoset by angle" +msgstr "Automatikus szögbeállítás" -msgid "Device:" -msgstr "Eszköz:" +msgid "Reset selection" +msgstr "Kiválasztás visszaállítása" -msgid "Diameter" -msgstr "Átmérő" +msgid "Alt + Mouse wheel" +msgstr "ALT+egérgörgő" -msgid "Diameter in mm of the pillar base" -msgstr "A pillér alapjának átmérője mm-ben" +msgid "Paints all facets inside, regardless of their orientation." +msgstr "Minden oldalt belülről fest, tájolásuktól függetlenül." -msgid "Diameter in mm of the support pillars" -msgstr "A támasztó pillérek átmérője mm-ben" +msgid "Ignores facets facing away from the camera." +msgstr "Figyelmen kívül hagyja a kamerától elfordított oldalakat." -msgid "Diameter of the pointing side of the head" -msgstr "A fej mutató oldalának átmérője" +msgid "Ctrl + Mouse wheel" +msgstr "CTRL+egérgörgő" -msgid "" -"Diameter of the print bed. It is assumed that origin (0,0) is located in the " -"center." -msgstr "" -"A tárgyasztal átmérője. Feltételezzük, hogy az origó (0,0) a középpontban " -"található." +msgid "Autoset custom supports" +msgstr "Egyéni támaszok automatikus beállítása" -msgid "differs from the original file" -msgstr "különbözik az eredeti fájltól" +msgid "Threshold:" +msgstr "Küszöbérték:" -msgid "Direction" -msgstr "Irány" +msgid "Enforce" +msgstr "Érvényesítés" -msgid "Disable \"%1%\"" -msgstr "\"%1%\" letiltása" +msgid "Block" +msgstr "Blokk" -msgid "Disable fan for the first" -msgstr "Ventilátor letiltása az első" +msgid "Block supports by angle" +msgstr "Blokktartók szöggel" -msgid "Disabled" -msgstr "Letiltva" +msgid "Add supports by angle" +msgstr "Támaszok hozzáadása szögek szerint" -msgid "Discard" -msgstr "Elvetés" +msgid "Place on face" +msgstr "Helyezze az arcra" -msgid "Discard all custom changes" -msgstr "Összes egyedi változtatás eldobása" +msgid "Hollow this object" +msgstr "Üreges a tárgy" -msgid "Discard changes" -msgstr "Változtatások eldobása" +msgid "Preview hollowed and drilled model" +msgstr "Előnézet üreges és fúrt modell" -msgid "Display" -msgstr "Kijelző" +msgid "Offset" +msgstr "Eltolás" -msgid "Display height" -msgstr "Kijelző magasság" +msgid "Quality" +msgstr "Minőség" -msgid "Display horizontal mirroring" -msgstr "Kijelző vízszintes tükrözése" +msgid "Closing distance" +msgstr "Zárási távolság" -msgid "Display orientation" -msgstr "Kijelző tájolás" +msgid "Hole diameter" +msgstr "Furat átmérője" -msgid "Display the Print Host Upload Queue window" -msgstr "A Nyomtató-feltöltési várakozási sor ablak megjelenítése" +msgid "Hole depth" +msgstr "Furat mélysége" -msgid "Display vertical mirroring" -msgstr "Kijelző függőleges tükrözése" +msgid "Remove selected holes" +msgstr "Kijelölt lyukak eltávolítása" -msgid "Display width" -msgstr "Kijelző szélesség" +msgid "Remove all holes" +msgstr "Minden lyuk eltávolítása" -msgid "Distance between ironing lines" -msgstr "Távolság a vasalási vonalak között" +msgid "Show supports" +msgstr "Mutasd a támaszokat" -msgid "" -"Distance between two connector sticks which connect the object and the " -"generated pad." -msgstr "Az objektumot és a generált párnát összekötő pálcák közötti távolság." +msgid "Add drainage hole" +msgstr "Adjon hozzá vízelvezető lyukat" -msgid "" -"Distance of the 0,0 G-code coordinate from the front left corner of the " -"rectangle." -msgstr "A 0,0 G-kód koordináta távolsága a téglalap bal elülső sarkától." +msgid "Delete drainage hole" +msgstr "Vízelvezető lyuk törlése" -msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "A hűtőcső középpontjának távolsága az extruder csúcsától." +msgid "Hollowing parameter change" +msgstr "Üregesítési paraméterek módosítása" -msgid "" -"Distance of the extruder tip from the position where the filament is parked " -"when unloaded. This should match the value in printer firmware. " -msgstr "Az extruder hegyének távolsága attól a helyzettől, ahol a szál betöltetlenül parkol. Ennek meg kell egyeznie a nyomtató firmware-ében megadott értékkel. " +msgid "Change drainage hole diameter" +msgstr "Vízelvezető lyuk átmérőjének módosítása" -msgid "Divide by zero" -msgstr "Nullával osztás" +msgid "Hollow and drill" +msgstr "Üreges és fúró" -msgid "Do not fail if a file supplied to --load does not exist." -msgstr "Ne hibázzon, ha a --betöltéshez megadott fájl nem létezik." +msgid "Move drainage hole" +msgstr "Mozgassa a vízelvezető lyukat" -msgid "" -"Do not rearrange the given models before merging and keep their original XY " -"coordinates." -msgstr "" -"Az egyesítés előtt ne rendezze át az adott modelleket, és tartsa meg az " -"eredeti XY-koordinátákat." +msgid "Move" +msgstr "Mozgatás" -msgid "" -"Do you mean %s%% instead of %s %s?\n" -"Select YES if you want to change this value to %s%%, \n" -"or NO if you are sure that %s %s is a correct value." -msgstr "" -"Úgy értette, hogy %s%% , ahelyett, hogy %s %s?\n" -"Válassza az IGEN lehetőséget, ha ezt az értéket %s%%-ra kívánja " -"módosítani, \n" -"vagy a NEM-et, ha biztos benne, hogy %s %s a helyes érték." +msgid "Rotate" +msgstr "Forgatás" -msgid "Do you want to continue changing the configuration?" -msgstr "Folytatja a konfiguráció módosítását?" +msgid "Scale" +msgstr "Skála" -msgid "Do you want to delete all saved tool changes?" -msgstr "Törölni szeretné az összes mentett szerszámváltást?" +msgid "Enforce seam" +msgstr "Varrat erősítése" -msgid "Do you want to proceed?" -msgstr "Akarja folytatni?" +msgid "Block seam" +msgstr "Blokk varrás" -msgid "Do you want to replace it" -msgstr "Szeretné helyettesíteni" +msgid "Seam painting" +msgstr "Varrás festés" -msgid "Do you want to save the changes to \"%1%\"?" -msgstr "Menti a változásokat a következőhöz: \"%1%\"?" +msgid "Head diameter" +msgstr "Fej átmérője" -msgid "Do you want to save your manually edited support points?" -msgstr "Menti a manuálisan szerkesztett támaszpontjait?" +msgid "Lock supports under new islands" +msgstr "Az új szigetek alatti zárszerkezetek" -msgid "Do you want to select default filaments for these FFF printer models?" -msgstr "" -"Kiválasztja az alapértelmezett filamenteket ezekhez az FFF nyomtatókhoz?" +msgid "Remove selected points" +msgstr "Kijelölt pontok eltávolítása" -msgid "Do you want to select default SLA materials for these printer models?" -msgstr "Kiválasztja az alapértelmezett anyagokat ezekhez az SLA nyomtatókhoz?" +msgid "Remove all points" +msgstr "Minden pont eltávolítása" -msgid "does not contain valid gcode." -msgstr "nem tartalmaz érvényes g-kódot." +msgid "Apply changes" +msgstr "Változások alkalmazása" -msgid "Don't arrange" -msgstr "Ne rendezzen" +msgid "Discard changes" +msgstr "Változások elvetése" -msgid "Don't import" -msgstr "Ne importálja" +msgid "Minimal points distance" +msgstr "Minimális ponttávolság" -msgid "Don't install" -msgstr "Ne telepítse" +msgid "Support points density" +msgstr "Támaszpont sűrűsége" -msgid "Don't notify about new releases any more" -msgstr "Ne értesítsen többé az új megjelenésekről" +msgid "Auto-generate points" +msgstr "Pontok automata generálása" -msgid "Don't save" -msgstr "Ne mentse" +msgid "Manual editing" +msgstr "Kézi szerkesztés" -msgid "Don't show again" -msgstr "Ne mutassa újra" +msgid "Add support point" +msgstr "Támaszpont hozzáadása" -msgid "Don't support bridges" -msgstr "Ne támassza a hidakat" +msgid "Delete support point" +msgstr "Támaszpont törlése" -msgid "Downgrade" -msgstr "Visszafrissítés" +msgid "Change point head diameter" +msgstr "Változási pontfej átmérője" -msgid "Draft shield" -msgstr "Huzatvédő" +msgid "Support parameter change" +msgstr "Alátámasztási paraméterek módosítása" -msgid "Drag" -msgstr "Húzás" +msgid "SLA Support Points" +msgstr "SLA támaszpontok" -msgid "Drag and drop G-code file" -msgstr "Húzza és ejtse a G-kód fájlt" +msgid "SLA gizmo turned on" +msgstr "SLA gizmo bekapcsolva" -msgid "Drilling holes into model." -msgstr "Furatok készítése a modellbe." +msgid "Do you want to save your manually edited support points?" +msgstr "Szeretné elmenteni a kézzel szerkesztett támogatási pontokat?" -msgid "" -"Drilling holes into the mesh failed. This is usually caused by broken model. " -"Try to fix it first." -msgstr "" -"A lyukak fúrása a hálóba nem sikerült. Ezt általában a sérült modell okozza. " -"Először próbálja meg azt kijavítani." +msgid "Save changes?" +msgstr "Változások mentése?" -msgid "Drop to bed" -msgstr "Letétel az asztalra" +msgid "SLA gizmo turned off" +msgstr "SLA gizmo kikapcsolva" -msgid "Duplicate" -msgstr "Megkettőzés" +msgid "Move support point" +msgstr "Támaszpont áthelyezése" -msgid "Duplicate by grid" -msgstr "Megkettőzés rács szerint" +msgid "Support points edit" +msgstr "Támaszpontok szerkesztés" -msgid "Duration" -msgstr "Időtartam" +msgid "Autogeneration will erase all manually edited points." +msgstr "Az automatikus generálás törli az összes kézzel szerkesztett pontot." -msgid "Dynamic" -msgstr "Dinamikus" +msgid "Are you sure you want to do it?" +msgstr "Biztos, hogy ezt akarja csinálni?" -msgid "E&xport" -msgstr "Exportálás" +msgid "Warning" +msgstr "Figyelem" -msgid "Edit" -msgstr "Szerkesztés" +msgid "Autogenerate support points" +msgstr "Támaszpontok automatikus generálása" -msgid "Edit color" -msgstr "Szín szerkesztése" +msgid "SLA gizmo keyboard shortcuts" +msgstr "SLA gizmo billentyűparancsok" -msgid "Edit current color - Right click the colored slider segment" +msgid "Note: some shortcuts work in (non)editing mode only." msgstr "" -"Jelenlegi szín szerkesztése - Kattintson a jobb egérgombbal a színezett " -"csúszkaszegmensre" - -msgid "Edit custom G-code" -msgstr "Egyedi G-kód szerkesztése" +"Megjegyzés: egyes parancsikonok csak (nem) szerkesztési módban működnek." -msgid "Edit Height Range" -msgstr "Magasságtartomány szerkesztése" +msgid "Left click" +msgstr "Bal klikk" -msgid "Edit pause print message" -msgstr "Nyomtatási szünet üzenetének szerkesztése" +msgid "Add point" +msgstr "Pont hozzáadása" -msgid "Edit physical printer" -msgstr "Fizikai nyomtató szerkesztése" +msgid "Right click" +msgstr "Jobb klikk" -msgid "Edit preset" -msgstr "Előbeállítás szerkesztése" +msgid "Remove point" +msgstr "Pont eltávolítása" -msgid "Edit tick mark - Ctrl + Left click" -msgstr "Jelölő szerkesztése - Ctrl + Bal kattintás" +msgid "Drag" +msgstr "Húz" -msgid "Edit tick mark - Right click" -msgstr "Jelölő szerkesztése - Jobb kattintás" +msgid "Move point" +msgstr "Mozgáspont" -msgid "Editing" -msgstr "Szerkesztés" +msgid "Add point to selection" +msgstr "Pont hozzáadása a kijelöléshez" -msgid "Eigen vectorization supported:" -msgstr "Támogatott saját vektorizálás:" +msgid "Remove point from selection" +msgstr "Pont eltávolítása a kijelölésből" -msgid "Ejec&t SD Card / Flash Drive" -msgstr "SD Kártya / Flash meghajtó eltávolítása" +msgid "Select by rectangle" +msgstr "Téglalap szerinti kijelölés" -msgid "Eject drive" -msgstr "Meghajtó kiadása" +msgid "Deselect by rectangle" +msgstr "Téglalap szerinti kijelölés megszüntetése" -msgid "Eject SD card / Flash drive" -msgstr "SD-kártya/ Flash meghajtó eltávolítása" +msgid "Select all points" +msgstr "Minden pont kijelölése" -msgid "Eject SD card / Flash drive after the G-code was exported to it." -msgstr "SD-kártyát / Flash meghajtót eltávolítása a G-kódot exportálása után." +msgid "Mouse wheel" +msgstr "Egérgörgő" -msgid "Ejecting of device %s(%s) has failed." -msgstr "A %s(%s) eszköz eltávolítása nem sikerült." +msgid "Move clipping plane" +msgstr "Vágási sík mozgatása" -msgid "" -"Elevation is too low for object. Use the \"Pad around object\" feature to " -"print the object without elevation." -msgstr "" -"Az objektum túl alacsonyan van. Használja a \"Párna az objektum körül\" " -"funkciót a tárgy elemelés nélküli nyomtatásához." +msgid "Reset clipping plane" +msgstr "Vágási sík visszaállítása" -msgid "Empty layer between %1% and %2%." -msgstr "Üres réteg %1% és %2% között." +msgid "Switch to editing mode" +msgstr "Szerkesztési módra váltás" -msgid "Enable" -msgstr "Engedélyezés" +msgid "Gizmo-Scale" +msgstr "Gizmo-Skála" -msgid "Enable auto cooling" -msgstr "Automatikus hűtés engedélyezése" +msgid "Gizmo-Place on Face" +msgstr "Gizmo-Helyezd az arcra" -msgid "Enable dark mode" -msgstr "Sötét mód engedélyezése" +msgid "Entering Paint-on supports" +msgstr "A felfestett támaszok bevitele" -msgid "Enable fan if layer print time is below" -msgstr "" -"Engedélyezze a ventilátort, ha a rétegnyomtatási idő a következő alatt van" +msgid "Entering Seam painting" +msgstr "Varratfestés bevitele" -msgid "Enable hollowing" -msgstr "Üregesítés engedélyezése" +msgid "Leaving Seam painting" +msgstr "Varratfestés elhagyása" -msgid "Enable horizontal mirroring of output images" -msgstr "A kimeneti képek vízszintes tükrözése" +msgid "Leaving Paint-on supports" +msgstr "Festékes támaszok elhagyása" -msgid "Enable ironing" -msgstr "Vasalás engedélyezése" +msgid "Add supports" +msgstr "Támaszok hozzáadása" -msgid "" -"Enable ironing of the top layers with the hot print head for smooth surface" -msgstr "" -"Lehetővé teszi a felső rétegek vasalását a forró nyomtatófejjel a sima " -"felület érdekében" +msgid "Undefined" +msgstr "Definiálatlan" -msgid "" -"Enable reading unknown configuration values by silently substituting them " -"with defaults." -msgstr "" -"Ismeretlen konfigurációs értékek olvasásának engedélyezése. Az " -"alapértelmezett értékek helyettesítése csendben." +msgid "%1% was substituted with %2%" +msgstr "%1% helyettesítették %2%" -msgid "" -"Enable reading unknown configuration values by verbosely substituting them " -"with defaults." -msgstr "" -"Ismeretlen konfigurációs értékek olvasásának engedélyezése. Az " -"alapértelmezett értékek helyettesítése megjegyzéssel." +msgid "Most likely the configuration was produced by a newer version of " +msgstr "Valószínűleg a konfigurációt egy újabb verziója hozta létre a " -msgid "Enable rotations (slow)" -msgstr "Forgatás engedélyezése (lassú)" +msgid "The following values were substituted:" +msgstr "A következő értékeket helyettesítettük:" -msgid "Enable support for legacy 3DConnexion devices" -msgstr "A korábbi 3DConnexion eszközök támogatásának engedélyezése" +msgid "Review the substitutions and adjust them if needed." +msgstr "Tekintse át a helyettesítéseket, és szükség esetén módosítsa azokat." -msgid "Enable support material generation." -msgstr "Engedélyezi a támaszanyag generálást." +msgid "SLA print settings" +msgstr "SLA nyomtatási beállítások" -msgid "Enable supports for enforcers only" -msgstr "Támasztékok engedélyezése csak a kényszerítőkre" +msgid "Physical Printer" +msgstr "Fizikai nyomtató" msgid "" -"Enable this to add comments into the G-Code labeling print moves with what " -"object they belong to, which is useful for the Octoprint CancelObject " -"plugin. This settings is NOT compatible with Single Extruder Multi Material " -"setup and Wipe into Object / Wipe into Infill." +"Configuration bundle was loaded, however some configuration values were not " +"recognized." msgstr "" -"Ha engedélyezi ezt a beállítást, akkor a G-kódban megjelölésre kerül, hogy " -"az egyes nyomtatási mozgások mely objektumhoz tartoznak, ami hasznos az " -"Octoprint CancelObject plugin számára. Ez a beállítás NEM kompatibilis a " -"Egyetlen Extruder Többféle Anyag beállítással és a Wipe into Object / Wipe " -"into Infill beállítással." - -msgid "Enable variable layer height feature" -msgstr "A változó rétegmagasság funkció engedélyezése" - -msgid "Enable vertical mirroring of output images" -msgstr "A kimeneti képe függőleges tükrözése" - -msgid "Enabled" -msgstr "Engedélyezve" - -msgid "End G-code" -msgstr "G-kód vége" - -msgid "Enforce" -msgstr "Kényszerítés" +"A konfigurációs csomag betöltődött, azonban néhány konfigurációs értéket nem " +"ismert fel." -msgid "Enforce seam" -msgstr "Varrat kényszerítése" +msgid "" +"Configuration file \"%1%\" was loaded, however some configuration values " +"were not recognized." +msgstr "" +"A \"%1%\" konfigurációs fájl betöltődött, azonban néhány konfigurációs " +"értéket nem ismert fel." -msgid "Enforce support for the first" -msgstr "Támasztó kényszerítése az első" +msgid "" +"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " +"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and " +"numerous others." +msgstr "" +"Közreműködnek: Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " +"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik és " +"számos más személy." -msgid "Enforce support for the first n layers" -msgstr "Támasztó kényszerítése az első n rétegnél" +msgid "" +"Starting with %1% 2.3, configuration directory on Linux has changed " +"(according to XDG Base Directory Specification) to \n" +"%2%.\n" +"\n" +"This directory did not exist yet (maybe you run the new version for the " +"first time).\n" +"However, an old %1% configuration directory was detected in \n" +"%3%.\n" +"\n" +"Consider moving the contents of the old directory to the new location in " +"order to access your profiles, etc.\n" +"Note that if you decide to downgrade %1% in future, it will use the old " +"location again.\n" +"\n" +"What do you want to do now?" +msgstr "" +"A %1% 2.3-tól kezdve a konfigurációs könyvtár Linuxon (az XDG Base Directory " +"Specification szerint) a következőre változik \n" +"%2%.\n" +"\n" +"Ez a könyvtár még nem létezett (talán először futtatja az új verziót).\n" +"Azonban egy régi %1%-os konfigurációs könyvtárat észleltek a következő " +"helyen \n" +"%3%.\n" +"\n" +"Fontolja meg a régi könyvtár tartalmának áthelyezését az új helyre, hogy " +"hozzáférhessen a profiljaihoz stb.\n" +"Vegye figyelembe, hogy ha a jövőben úgy dönt, hogy a %1%-ot leminősíti, a " +"program ismét a régi helyet fogja használni.\n" +"\n" +"Mit szeretne most tenni?" -msgid "Enforce supports" -msgstr "Támaszték kényszerítése" +msgid "%s - BREAKING CHANGE" +msgstr "%s - TÖRÉSVÁLTÁS" -msgid "Enqueued" -msgstr "Sorban áll" +msgid "Quit, I will move my data now" +msgstr "Kilépés, most áthelyezem az adataimat" -msgid "Ensure on bed" -msgstr "Ágyra igazítás" +msgid "Start the application" +msgstr "Az alkalmazás elindítása" -msgid "Ensure vertical shell thickness" -msgstr "Függőleges héjvastagság biztosítása" +msgid "" +"%s has encountered an error. It was likely caused by running out of memory. " +"If you are sure you have enough RAM on your system, this may also be a bug " +"and we would be glad if you reported it.\n" +"\n" +"The application will now terminate." +msgstr "" +"%s hibát észlelt. Valószínűleg a memória elfogyása okozta. Ha biztos vagy " +"benne, hogy elegendő RAM van a rendszeredben, akkor ez is lehet hiba, és " +"örülnénk, ha jelentenéd.\n" +"\n" +"Az alkalmazás ezután befejeződik." -msgid "Enter a search term" -msgstr "Írja be a keresett kifejezést" +msgid "Fatal error" +msgstr "Végzetes hiba" -msgid "Enter custom G-code used on current layer" -msgstr "Adja meg az aktuális rétegen használt egyéni G-kódot" +msgid "" +"%s has encountered a localization error. Please report to %s team, what " +"language was active and in which scenario this issue happened. Thank you.\n" +"\n" +"The application will now terminate." +msgstr "" +"%s lokalizációs hibát észlelt. Kérjük, jelentse a %s csapatnak, hogy melyik " +"nyelv volt aktív, és milyen forgatókönyv szerint történt a hiba. Köszönjük.\n" +"\n" +"Az alkalmazás ezután befejeződik." -msgid "Enter new name" -msgstr "Új név megadása" +msgid "Critical error" +msgstr "Kritikus hiba" -msgid "Enter short message shown on Printer display when a print is paused" +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error. Your user profiles will not be " +"affected." msgstr "" -"A nyomtatás szüneteltetésekor a nyomtató kijelzőjén megjelenő rövid üzenet " -"megadása" +"Hiba a %1% konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja " +"meg manuálisan törölni a fájlt a hiba elhárításához. A felhasználói " +"profilokat ez nem érinti." msgid "" -"Enter the bed temperature needed for getting your filament to stick to your " -"heated bed." +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error." msgstr "" -"Adja meg azt a hőmérsékletet, amely ahhoz szükséges, hogy a filament a " -"fűtött tárgyasztalhoz tapadjon." +"Hiba a %1% konfigurációs fájl elemzése során, valószínűleg sérült. Próbálja " +"meg manuálisan törölni a fájlt a hiba elhárításához." -msgid "Enter the diameter of your filament." -msgstr "Adja meg a filament átmérőjét." +msgid "" +"%s\n" +"Do you want to continue?" +msgstr "" +"%s\n" +"Szeretné folytatni?" -msgid "Enter the diameter of your printer's hot end nozzle." -msgstr "Adja meg a nyomtató hot end fúvókájának átmérőjét." +msgid "Remember my choice" +msgstr "Emlékezz a döntésemre" -msgid "Enter the height you want to jump to" -msgstr "Adja meg a magasságot, amelyre ugrani szeretne" +msgid " icon" +msgstr " ikon" -msgid "Enter the move you want to jump to" -msgstr "Adja meg a mozdulatot, amelyre ugrani szeretne" +msgid "Artwork model by" +msgstr "Művészeti modell" -msgid "Enter the number of copies:" -msgstr "Adja meg a szükséges példányok számát:" +msgid "Loading configuration" +msgstr "Konfiguráció betöltése" -msgid "Enter the temperature needed for extruding your filament." -msgstr "Adja meg a filament extrudálásához szükséges hőmérsékletet." +msgid "Preparing settings tabs" +msgstr "Beállítások lapjainak előkészítése" msgid "" -"Enter weight of the empty filament spool. One may weigh a partially consumed " -"filament spool before printing and one may compare the measured weight with " -"the calculated weight of the filament with the spool to find out whether the " -"amount of filament on the spool is sufficient to finish the print." -msgstr "" -"Adja meg az üres filament spulni súlyát. A nyomtatás előtt megmérheti a " -"részben elfogyasztott spulni súlyát, és összehasonlíthatja a mért súlyt a " -"számított súllyal, hogy megtudja elegendő-e az spulnin lévő filament " -"mennyisége a nyomtatás befejezéséhez." +"You have the following presets with saved options for \"Print Host upload\"" +msgstr "Következő előbeállítások rendelkeznek a „Print Host” mentett opciókkal" msgid "" -"Enter your filament cost per kg here. This is only for statistical " -"information." +"But since this version of %s we don't show this information in Printer " +"Settings anymore.\n" +"Settings will be available in physical printers settings." msgstr "" -"Ide írja be a filament kg-onkénti költségét. Ez csak statisztikai információ." +"A %s ezen verziója óta azonban már nem jelenítjük meg ezt az információt a " +"nyomtató beállításaiban.\n" +"A beállítások a fizikai nyomtatók beállításaiban lesznek elérhetők." msgid "" -"Enter your filament density here. This is only for statistical information. " -"A decent way is to weigh a known length of filament and compute the ratio of " -"the length to volume. Better is to calculate the volume directly through " -"displacement." +"By default new Printer devices will be named as \"Printer N\" during its " +"creation.\n" +"Note: This name can be changed later from the physical printers settings" msgstr "" -"Ide írja be a filament sűrűségét. Ez csak statisztikai információ. Jó " -"módszer egy ismert hosszúságú filamentdarab súlyának lemérése, majd a súly " -"és a térfogat arányának kiszámítása. Még jobb, ha a térfogatot közvetlenül " -"víz kiszorítással határozza meg." +"Az új nyomtatóeszközök alapértelmezés szerint \"N nyomtató\" nevet kapnak a " +"létrehozás során.\n" +"Megjegyzés: Ez a név később megváltoztatható a fizikai nyomtatók " +"beállításaiból" -msgid "" -"Enter your filament diameter here. Good precision is required, so use a " -"caliper and do multiple measurements along the filament, then compute the " -"average." -msgstr "" -"Ide írja be a filament átmérőjét. Jó pontosság szükséges, ezért használjon " -"tolómérőt, és végezzen többszöri mérést az izzószál mentén, majd számítsa ki " -"az átlagot." +msgid "Information" +msgstr "Információ" -msgid "" -"Enumeration of host printers failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" -msgstr "" -"Az nyomtató gazdagépek felsorolása nem sikerült.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" +msgid "Recreating" +msgstr "Újraalkotása" -msgid "Error" -msgstr "Hiba" +msgid "Loading of current presets" +msgstr "Aktuális előbeállítások betöltése" -msgid "ERROR" -msgstr "HIBA" +msgid "Loading of a mode view" +msgstr "Mód nézet betöltése" -msgid "Error accessing port at %s: %s" -msgstr "Hiba a(z) %s port hozzáférésekor: %s" +msgid "Choose one file (3MF/AMF):" +msgstr "Válasszon egy fájlt (3MF/AMF):" -msgid "Error during reload" -msgstr "Hiba újratöltés közben" +msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" +msgstr "Válasszon ki egy vagy több fájlt (STL/OBJ/AMF/3MF/PRUSA):" -msgid "Error during replace" -msgstr "Hiba helyettesítés közben" +msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" +msgstr "Válasszon ki egy fájlt (GCODE/.GCO/.G/.ngc/NGC):" -msgid "Error loading shaders" -msgstr "Hiba a shaderek betöltésekor" +msgid "Changing of an application language" +msgstr "Alkalmazási nyelv módosítása" -msgid "Error Message" -msgstr "Hibaüzenet" +msgid "Select the language" +msgstr "Nyelv kiválasztása" -msgid "Error uploading to print host:" -msgstr "Hiba a nyomtató gépre való történő feltöltéskor:" +msgid "Language" +msgstr "Nyelv" -msgid "Error while loading .gcode file" -msgstr "Hiba a .gcode fájl betöltése közben" - -msgid "Error with zip archive" -msgstr "Hiba a zip archívummal" - -msgid "Error!" -msgstr "Hiba!" +msgid "modified" +msgstr "módosított" -msgid "Error! Invalid model" -msgstr "Hiba! Nem megfelelő modell" +msgid "Run %s" +msgstr "Fut %s" -msgid "ERROR:" -msgstr "HIBA:" +msgid "&Configuration Snapshots" +msgstr "&Konfigurációs pillanatképek" -msgid "Error: %s" -msgstr "Hiba: %s" +msgid "Inspect / activate configuration snapshots" +msgstr "Konfigurációs pillanatképek megtekintése / aktiválása" -msgid "ERROR: not enough resources to execute a new job." -msgstr "HIBA: nincs elegendő erőforrás egy új feladat végrehajtásához." +msgid "Take Configuration &Snapshot" +msgstr "Konfiguráció &Pillanatkép készítése" -msgid "" -"ERROR: Please close all manipulators available from the left toolbar first" -msgstr "" -"HIBA: Először zárja be a bal oldali eszköztárból elérhető összes manipulátort" +msgid "Capture a configuration snapshot" +msgstr "Konfigurációs pillanatkép készítése" -msgid "Estimated printing time" -msgstr "Becsült nyomtatási idő" +msgid "Check for updates" +msgstr "Frissítések keresése" -msgid "Estimated printing times" -msgstr "Becsült nyomtatási idő" +msgid "Check for configuration updates" +msgstr "Konfigurációs frissítések keresése" -msgid "Even-odd" -msgstr "Páros - Páratlan" +msgid "&Preferences" +msgstr "&Preferenciák" -msgid "Event" -msgstr "Esemény" +msgid "Application preferences" +msgstr "Alkalmazási preferenciák" -msgid "Exit %s" -msgstr "Kilépés %s" +msgid "Simple" +msgstr "Egyszerű" -msgid "Expand sidebar" -msgstr "Az oldalsáv kibontása" +msgid "Simple View Mode" +msgstr "Egyszerű nézet" -msgid "" -"Expansion of the first raft or support layer to improve adhesion to print " -"bed." -msgstr "" -"Az első tutaj-, vagy támaszréteg túlnyúlása a tárgyasztalhoz való tapadás " -"javítása érdekében." +msgid "Advanced" +msgstr "Haladó" -msgid "Expansion of the raft in XY plane for better stability." -msgstr "A tutaj XY síkban történő kiterjesztése a jobb stabilitás érdekében." +msgid "Advanced View Mode" +msgstr "Speciális nézet" -msgid "" -"Experimental option for preventing support material from being generated " -"under bridged areas." -msgstr "" -"Kísérleti lehetőség a támasztékok létrehozásának megakadályozására az " -"áthidalt területek alatt." +msgid "Expert" +msgstr "Szakértő" -msgid "Expert mode" -msgstr "Szakértő mód" +msgid "Expert View Mode" +msgstr "Szakértői nézet" -msgid "Export" -msgstr "Exportálás" +msgid "Mode" +msgstr "Mód" -msgid "Export &Config" -msgstr "Beállítások Exportálása" +msgid "%s View Mode" +msgstr "%s Nézet mód" -msgid "Export &G-code" -msgstr "G-kód Exportálása" +msgid "&Language" +msgstr "&Nyelv" -msgid "Export &Toolpaths as OBJ" -msgstr "Szerszámpálya Exportálása OBJ-ként" +msgid "Flash printer &firmware" +msgstr "Nyomtató &firmware égetése" -msgid "Export 3MF" -msgstr "3MF exportálása" +msgid "Upload a firmware image into an Arduino based printer" +msgstr "Firmware kép feltöltése egy Arduino alapú nyomtatóba" -msgid "Export all presets including physical printers to file" -msgstr "Konfigurációs csomag exportálása a fizikai nyomtatókkal együtt" +msgid "Taking configuration snapshot" +msgstr "Konfigurációs pillanatkép készítése" -msgid "Export all presets to file" -msgstr "Az összes előbeállítás exportálása fájlba" +msgid "Snapshot name" +msgstr "Pillanatkép neve" -msgid "Export AMF" -msgstr "AMF exportálása" +msgid "Continue to activate a configuration snapshot %1%?" +msgstr "Folytja a konfigurációs pillanatfelvétel aktiválását %1%?" -msgid "Export AMF file:" -msgstr "AMF fájl exportálása:" +msgid "Failed to activate configuration snapshot." +msgstr "Nem sikerült aktiválni a konfigurációs pillanatfelvételt." -msgid "Export config" -msgstr "Beállítások exportálása" +msgid "Language selection" +msgstr "Nyelv kiválasztása" -msgid "Export Config &Bundle" -msgstr "Konfigurációs Csomag Exportálása" +msgid "" +"Switching the language will trigger application restart.\n" +"You will lose content of the platter." +msgstr "" +"A nyelv megváltoztatásához újra kell indítani az alkalmazást.\n" +"Elveszítheti a tálca tartalmát." -msgid "Export Config Bundle With Physical Printers" -msgstr "Konfigurációs Csomag Exportálása Fizikai Nyomtatókkal együtt" +msgid "Do you want to proceed?" +msgstr "Akarja folytatni?" -msgid "Export current configuration to file" -msgstr "Aktuális beállítások exportálása fájlba" +msgid "&Configuration" +msgstr "&Konfiguráció" -msgid "Export current plate as G-code" -msgstr "Az aktuális tárgyasztal exportálása G-kódként" +msgid "The preset(s) modifications are successfully saved" +msgstr "Az előbeállítás(ok) módosításait sikeresen mentettük" -msgid "Export current plate as G-code to SD card / Flash drive" -msgstr "Tárgyasztal Exportálása G-kódként SD Kártyára / Flash memóriára" +msgid "The uploads are still ongoing" +msgstr "A feltöltések folyamatban vannak" -msgid "Export current plate as STL" -msgstr "Tárgyasztal Exportálása STL-ként" +msgid "Stop them and continue anyway?" +msgstr "Leállítja őket, és mégis folytatja?" -msgid "Export current plate as STL including supports" -msgstr "Tárgyasztal Exportálása STL-ként támasztékokkal együtt" +msgid "Ongoing uploads" +msgstr "Folyamatos feltöltések" -msgid "" -"Export full pathnames of models and parts sources into 3mf and amf files" +msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "" -"Exportálja a modellek és alkatrészforrások teljes elérési útját 3mf és amf " -"fájlokba" +"Lehetetlen több részből álló objektum(ok) nyomtatása SLA technológiával." -msgid "Export G-code" -msgstr "G-kód exportálása" +msgid "Please check and fix your object list." +msgstr "Kérjük, ellenőrizze és javítsa ki az objektumok listáját." -msgid "Export G-code to SD Card / Flash Drive" -msgstr "G-kód Exportálása SD Kártyára / Flash memóriára" +msgid "Attention!" +msgstr "Figyelem!" -msgid "Export G-Code." -msgstr "G-Kód Exportálása." +msgid "Select a gcode file:" +msgstr "Válasszon ki egy gcode fájlt:" -msgid "Export OBJ" -msgstr "OBJ exportálása" +msgid "%s GUI initialization failed" +msgstr "%s GUI inicializálás sikertelen" -msgid "Export OBJ file:" -msgstr "OBJ fájl exportálása:" +msgid "Fatal error, exception catched: %1%" +msgstr "Súlyos hiba, fogadott kivétel: %1%" -msgid "Export of a temporary 3mf file failed" -msgstr "Az ideiglenes 3mf fájl exportálása nem sikerült" +msgid "Start at height" +msgstr "Kezdő magasság" -msgid "Export Plate as &STL" -msgstr "Tárgyasztal Exportálása STL-ként" +msgid "Stop at height" +msgstr "Megállási magasság" -msgid "Export Plate as STL &Including Supports" -msgstr "Tárgyasztal Exportálása STL-ként támasztékokkal együtt" +msgid "Remove layer range" +msgstr "Rétegtartomány eltávolítása" -msgid "Export SLA" -msgstr "SLA exportálása" +msgid "Add layer range" +msgstr "Rétegtartomány hozzáadása" -msgid "Export sources full pathnames to 3mf and amf" -msgstr "Exportálja a források teljes elérési útját a 3mf és amf fájlokba" +msgid "Add part" +msgstr "Rész hozzáadása" -msgid "Export STL" -msgstr "STL exportálása" +msgid "Add modifier" +msgstr "Módosítás hozzáadása" -msgid "Export STL file:" -msgstr "STL fájl exportálása:" +msgid "Add support enforcer" +msgstr "Támaszték végrehajtás hozzáadása" -msgid "Export the model(s) as 3MF." -msgstr "Modell(ek) exportálása 3MF formátumban." +msgid "Add support blocker" +msgstr "Támaszték blokkolás hozzáadása" -msgid "Export the model(s) as AMF." -msgstr "Modell(ek) exportálása AMF formátumban." +msgid "Add seam position" +msgstr "Varrat pozíció hozzáadása" -msgid "Export the model(s) as OBJ." -msgstr "Modell(ek) exportálása OBJ formátumban." +msgid "Name" +msgstr "Név" -msgid "Export the model(s) as STL." -msgstr "Modell(ek) exportálása STL formátumban." +msgid "Editing" +msgstr "Szerkesztés" -msgid "Export to SD card / Flash drive" -msgstr "Exportálás SD kártyára / Flash meghajtóra" +msgid "Auto-repaired (%d errors):" +msgstr "Automatikusan javított (%d hiba):" -msgid "Export toolpaths as OBJ" -msgstr "Szerszámpálya Exportálása OBJ-ként" +msgid "degenerate facets" +msgstr "degenerált lapok" -msgid "Export." -msgstr "Exportálás." +msgid "edges fixed" +msgstr "rögzített élek" -msgid "Exporting configuration bundle" -msgstr "Konfigurációs csomag exportálása" +msgid "facets removed" +msgstr "lapok eltávolítva" -msgid "Exporting finished." -msgstr "Exportálás kész." +msgid "facets added" +msgstr "lapok hozzáadása" -msgid "Exporting G-code" -msgstr "G-kód exportálása" +msgid "facets reversed" +msgstr "lapok megfordítása" -msgid "Exporting source model" -msgstr "Forrásmodell exportálása" +msgid "backwards edges" +msgstr "hátrafelé mutató élek" -msgid "Exporting." -msgstr "Exportálás." +msgid "Right button click the icon to fix STL through Netfabb" +msgstr "Jobb klikk az ikonra az STL javításához a Netfabbon keresztül" -msgid "Exposition time is out of printer profile bounds." -msgstr "Az expozíciós idő a nyomtató profiljának határain kívül esik." +msgid "Right button click the icon to change the object settings" +msgstr "Jobb klikk az ikonra az objektum beállításainak módosításához" -msgid "Exposure" -msgstr "Expozíció" +msgid "Click the icon to change the object settings" +msgstr "Klikk az ikonra az objektum beállításainak módosításához" -msgid "Exposure time" -msgstr "Expozíciós idő" +msgid "Right button click the icon to change the object printable property" +msgstr "" +"Jobb klikk az ikonra az objektum nyomtatható tulajdonságának " +"megváltoztatásához" -msgid "External perimeter" -msgstr "Külső kerület" +msgid "Click the icon to change the object printable property" +msgstr "Klikk az ikonra az objektum nyomtatható tulajdonságának módosításához" -msgid "external perimeters" -msgstr "külső kerületek _ nyomtatásakor" +msgid "Change Extruder" +msgstr "Extruder cseréje" -msgid "External perimeters" -msgstr "Külső kerületek" +msgid "Rename Object" +msgstr "Tárgy átnevezése" -msgid "External perimeters first" -msgstr "Külső kerületek először" +msgid "Rename Sub-object" +msgstr "Alobjektum átnevezése" -msgid "Extra length on restart" -msgstr "Extra hosszúság újraindításkor" +msgid "Instances to Separated Objects" +msgstr "Példányok elválasztott objektumokhoz" -msgid "Extra loading distance" -msgstr "Extra betöltési hossz" +msgid "Volumes in Object reordered" +msgstr "Az objektum kötetek átrendezve" -msgid "Extruder" -msgstr "Extruder" +msgid "Object reordered" +msgstr "Objektum átrendezve" -msgid "Extruder %d" -msgstr "Extruder %d" +msgid "Quick Add Settings (%s)" +msgstr "Gyors hozzáadási beállítások (%s)" -msgid "Extruder (tool) is changed to Extruder \"%1%\"" -msgstr "Az Extruder (szerszám) \"%1%\" Extruderre változott." +msgid "Select showing settings" +msgstr "Válassza ki a beállítások megjelenítését" -msgid "Extruder changed to" -msgstr "Extruder cserélve" +msgid "Add Settings for Layers" +msgstr "Beállítások hozzáadása a rétegekhez" -msgid "Extruder Color" -msgstr "Extruder színe" +msgid "Add Settings for Sub-object" +msgstr "Beállítások hozzáadása az alobjektumhoz" -msgid "Extruder offset" -msgstr "Extruder offset" +msgid "Add Settings for Object" +msgstr "Objektum beállításainak hozzáadása" -msgid "Extruders" -msgstr "Extruderek" +msgid "Add Settings Bundle for Height range" +msgstr "Beállítási csomag hozzáadása a magassági tartományhoz" -msgid "Extruders count" -msgstr "Extruderek száma" +msgid "Add Settings Bundle for Sub-object" +msgstr "Beállítási csomag hozzáadása az alobjektumhoz" -msgid "Extrusion" -msgstr "Extrudálás" +msgid "Add Settings Bundle for Object" +msgstr "Beállítási csomag hozzáadása az objektumhoz" -msgid "Extrusion axis" -msgstr "Extrudáló tengely" +msgid "Slab" +msgstr "Lap" -msgid "Extrusion multiplier" -msgstr "Extrudáló szorzó" +msgid "Box" +msgstr "Doboz" -msgid "Extrusion Temperature:" -msgstr "Extrudálási hőmérséklet:" +msgid "Cylinder" +msgstr "Henger" -msgid "Extrusion width" -msgstr "Extrudálási szélesség" +msgid "Height range Modifier" +msgstr "Magassági tartomány módosító" -msgid "Facets" -msgstr "Felületek" +msgid "Add settings" +msgstr "Beállítások hozzáadása" -msgid "Faded layers" -msgstr "Áttűnő rétegek" +msgid "Change type" +msgstr "Változás típusa" -msgid "failed finding central directory" -msgstr "nem sikerült megtalálni a központi könyvtárat" +msgid "Set as a Separated Object" +msgstr "Különálló objektumként beállítva" -msgid "Failed loading file \"%1%\" due to an invalid configuration." -msgstr "A \"%1%\" fájl betöltése nem sikerült érvénytelen konfiguráció miatt." +msgid "Set as a Separated Objects" +msgstr "Különálló objektumokként beállítva" -msgid "Failed loading the input model." -msgstr "A bemeneti modellt betöltése nem sikerült." +msgid "Printable" +msgstr "Nyomtatható" -msgid "Failed processing of the output_filename_format template." -msgstr "" -"A kimeneti fájl formátum (output_filename_format) sablon feldolgozása nem " -"sikerült." +msgid "Rename" +msgstr "Átnevezés" -msgid "Failed to activate configuration snapshot." -msgstr "Nem sikerült a konfigurációs pillanatkép aktiválása." +msgid "Fix through the Netfabb" +msgstr "Javítás a Netfabb-on keresztül" -msgid "Failed to drill some holes into the model" -msgstr "Néhány lyukat nem sikerült a modellbe fúrni" +msgid "Export as STL" +msgstr "STL exportálása" -msgid "Fan speed" -msgstr "Ventilátor sebesség" +msgid "Reload the selected volumes from disk" +msgstr "A kiválasztott kötetek újratöltése a lemezről" -msgid "Fan Speed (%)" -msgstr "Ventillátor Sebesség (%)" +msgid "Set extruder for selected items" +msgstr "Extruder beállítása a kiválasztott elemekhez" -msgid "" -"Fan speed will be ramped up linearly from zero at layer " -"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " -"\"full_fan_speed_layer\" will be ignored if lower than " -"\"disable_fan_first_layers\", in which case the fan will be running at " -"maximum allowed speed at layer \"disable_fan_first_layers\" + 1." -msgstr "" -"A ventilátor sebessége lineárisan emelkedik a \"disable_fan_first_layers\" " -"rétegnél lévő nullától a \"full_fan_speed_layer\" rétegnél lévő maximumig. A " -"\"full_fan_speed_layer\" értéket figyelmen kívül hagyjuk, ha az alacsonyabb, " -"mint a \"disable_fan_first_layers\" érték, ebben az esetben a ventilátor a " -"\"disable_fan_fan_first_layers\" + 1 értéken a maximális megengedett " -"sebességgel fog működni." +msgid "Default" +msgstr "Alapértelmezett" -msgid "Fast" -msgstr "Gyors" +msgid "Scale to print volume" +msgstr "Nyomtatási mennyiség méretezése" -msgid "Fast tilt" -msgstr "Gyors billentés" +msgid "Scale the selected object to fit the print volume" +msgstr "A kiválasztott objektum méretezése a nyomtatási térfogat méretére" -msgid "Fatal error" -msgstr "Végzetes hiba" +msgid "Convert from imperial units" +msgstr "Átváltás birodalmi egységekből" -msgid "Fatal error, exception catched: %1%" -msgstr "Végzetes hiba, elkapott kivétel: %1%" +msgid "Revert conversion from imperial units" +msgstr "Átváltás visszafordítása a brit mértékegységekből" -msgid "Feature type" -msgstr "Részelem típus" +msgid "Merge" +msgstr "Egyesítés" -msgid "Feature types" -msgstr "Részelem típus" +msgid "Merge objects to the one multipart object" +msgstr "Objektumok egyesítése egyetlen többrészes objektumba" -msgid "filament" -msgstr "filament" +msgid "Merge objects to the one single object" +msgstr "Objektumok egyesítése egyetlen objektummá" -msgid "Filament" -msgstr "Filament" +msgid "Add Shape" +msgstr "Alak hozzáadása" -msgid "Filament and Nozzle Diameters" -msgstr "Filament és Fúvóka Átmérő" +msgid "Load Part" +msgstr "Alkatrész betöltése" -msgid "Filament at extruder %1%" -msgstr "Filament %1% extrudernél _" +msgid "Add Generic Subobject" +msgstr "Általános alobjektum hozzáadása" -msgid "Filament Diameter:" -msgstr "Filament Átmérő:" +msgid "Delete Settings" +msgstr "Beállítások törlése" -msgid "Filament End G-code" -msgstr "Filament Vége G-kód" +msgid "Delete All Instances from Object" +msgstr "Minden példány törlése az objektumból" + +msgid "Delete Height Range" +msgstr "Magassági tartomány törlése" + +msgid "From Object List You can't delete the last solid part from object." +msgstr "" +"Az objektumlistából Nem törölheti az utolsó tömör alkatrészt az objektumból." + +msgid "Delete Subobject" +msgstr "Alobjektum törlése" + +msgid "Last instance of an object cannot be deleted." +msgstr "Egy objektum utolsó példánya nem törölhető." + +msgid "Delete Instance" +msgstr "Példány törlése" msgid "" -"Filament is cooled by being moved back and forth in the cooling tubes. " -"Specify desired number of these moves." +"The selected object couldn't be split because it contains only one part." msgstr "" -"A filament hűtése úgy történik, hogy oda-vissza mozgatják a hűtőcsőben. Adja " -"meg a kívánt lépések számát." +"A kijelölt objektumot nem lehetett felosztani, mert csak egy részt tartalmaz." -msgid "Filament load time" -msgstr "Filament betöltési idő" +msgid "Split to Parts" +msgstr "Részekre osztás" -msgid "Filament notes" -msgstr "Filament megjegyzések" +msgid "Merged" +msgstr "Összevont" -msgid "Filament Overrides" -msgstr "Filament Felülbírálások" +msgid "Merge all parts to the one single object" +msgstr "Összevonja az összes részt egyetlen objektummá" -msgid "Filament parking position" -msgstr "Filament parkolási pozíció" +msgid "Add Layers" +msgstr "Rétegek hozzáadása" -msgid "Filament Profiles Selection" -msgstr "Filament Profil Kiválasztás" +msgid "Group manipulation" +msgstr "Csoportos manipuláció" -msgid "Filament properties" -msgstr "Filament tulajdonságok" +msgid "Object manipulation" +msgstr "Objektum manipuláció" -msgid "Filament Settings" -msgstr "Filament Beállítások" +msgid "Object Settings to modify" +msgstr "Módosítandó objektumbeállítások" -msgid "Filament Settings Tab" -msgstr "Filament Beállítások Fül" +msgid "Part Settings to modify" +msgstr "Módosítandó részbeállítások" -msgid "Filament Start G-code" -msgstr "Filament Kezdete G-kód" +msgid "Layer range Settings to modify" +msgstr "Rétegtartomány A módosítandó beállítások" -msgid "Filament type" -msgstr "Filament típus" +msgid "Part manipulation" +msgstr "Részmanipuláció" -msgid "Filament unload time" -msgstr "Filament kiürítési idő" +msgid "Instance manipulation" +msgstr "Példa manipuláció" -msgid "filaments" -msgstr "filamentek" +msgid "Height ranges" +msgstr "Magassági tartományok" -msgid "Filaments" -msgstr "Filamentek" +msgid "Settings for height range" +msgstr "A magassági tartomány beállításai" -msgid "file close failed" -msgstr "fájl lezárás sikertelen" +msgid "Delete Selected Item" +msgstr "Kijelölt elem törlése" -msgid "file create failed" -msgstr "fájl létrehozás sikertelen" +msgid "Delete Selected" +msgstr "Kijelöltek törlése" -msgid "File for the replace wasn't selected" -msgstr "A helyettesítéshez nem volt fájl kiválasztva" +msgid "Add Height Range" +msgstr "Magassági tartomány hozzáadása" -msgid "File Not Found" -msgstr "Fájl Nem Található" +msgid "" +"Cannot insert a new layer range after the current layer range.\n" +"The next layer range is too thin to be split to two\n" +"without violating the minimum layer height." +msgstr "" +"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után.\n" +"A következő rétegtartomány túl vékony ahhoz, hogy két részre lehessen " +"osztani.\n" +"a minimális rétegmagasság megsértése nélkül." -msgid "file not found" -msgstr "fájl nem található" +msgid "" +"Cannot insert a new layer range between the current and the next layer " +"range.\n" +"The gap between the current layer range and the next layer range\n" +"is thinner than the minimum layer height allowed." +msgstr "" +"Nem lehet új rétegtartományt beszúrni az aktuális és a következő " +"rétegtartomány közé.\n" +"Az aktuális és a következő rétegtartomány közötti rés\n" +"vékonyabb, mint a megengedett minimális rétegmagasság." -msgid "file open failed" -msgstr "fájl megnyitás sikertelen" +msgid "" +"Cannot insert a new layer range after the current layer range.\n" +"Current layer range overlaps with the next layer range." +msgstr "" +"Nem lehet új rétegtartományt beszúrni az aktuális rétegtartomány után.\n" +"Az aktuális rétegtartomány átfedésben van a következő rétegtartománnyal." -msgid "file read failed" -msgstr "fájl olvasás sikertelen" +msgid "Edit Height Range" +msgstr "Magassági tartomány szerkesztése" -msgid "file seek failed" -msgstr "fájl keresés sikertelen" +msgid "Selection-Remove from list" +msgstr "Kiválasztás-Törlés a listáról" -msgid "file stat failed" -msgstr "fájl státusz sikertelen" +msgid "Selection-Add from list" +msgstr "Kiválasztás-Hozzáadás a listához" -msgid "file too large" -msgstr "fájl túl nagy" +msgid "Object or Instance" +msgstr "Objektum vagy példány" -msgid "file write failed" -msgstr "fájl írás sikertelen" +msgid "Part" +msgstr "Rész" -msgid "Filename" -msgstr "Fájlnév" +msgid "Layer" +msgstr "Réteg" -msgid "Files" -msgstr "Fájlok" +msgid "Unsupported selection" +msgstr "Nem támogatott kiválasztás" -msgid "Files association" -msgstr "Fájl társítás" +msgid "You started your selection with %s Item." +msgstr "A kiválasztást a %s elemmel kezdte." -msgid "Fill angle" -msgstr "Kitöltési szög" +msgid "In this mode you can select only other %s Items%s" +msgstr "Ebben az üzemmódban csak egyéb %s tételeket%s választhat ki" -msgid "Fill bed" -msgstr "Tárgyasztal kitöltése" +msgid "of a current Object" +msgstr "egy aktuális objektum" -msgid "Fill density" -msgstr "Kitöltés sűrűsége" +msgid "Info" +msgstr "Infó" -msgid "Find" -msgstr "Keresés" +msgid "You can't change a type of the last solid part of the object." +msgstr "You can't change a type of the last solid part of the object." -msgid "Find / replace patterns in G-code lines and substitute them." -msgstr "A G-kód sorokban található mintázatok keresése/behelyettesítése." +msgid "Modifier" +msgstr "Módosító" -msgid "Finished" -msgstr "Befejeződött" +msgid "Support Enforcer" +msgstr "Támaszték végrehajtó" -msgid "Firmware" -msgstr "Firmware" +msgid "Support Blocker" +msgstr "Támaszték blokkoló" -msgid "Firmware flasher" -msgstr "Firware feltöltő" +msgid "Seam Position" +msgstr "Varrás pozíciója" -msgid "Firmware image:" -msgstr "Firmware kép:" +msgid "Select type of part" +msgstr "Válassza ki az alkatrész típusát" -msgid "Firmware Retraction" -msgstr "Firmware visszahúzás" +msgid "Change Part Type" +msgstr "Alkatrész típusának módosítása" -msgid "Firmware Type" -msgstr "Firmware Típus" +msgid "Enter new name" +msgstr "Új név megadása" -msgid "first" -msgstr "első" +msgid "Renaming" +msgstr "Átnevezés" -msgid "First layer" -msgstr "Első réteg" +msgid "The supplied name is not valid;" +msgstr "A megadott név nem érvényes;" -msgid "First layer bed temperature" -msgstr "Tárgyasztal hőmérséklete az első rétegnél" +msgid "the following characters are not allowed:" +msgstr "a következő karakterek nem engedélyezettek:" -msgid "First layer density" -msgstr "Első réteg sűrűsége" +msgid "Select extruder number:" +msgstr "Válassza ki az extruder számát:" -msgid "First layer expansion" -msgstr "Első réteg túlnyúlása" +msgid "This extruder will be set for selected items" +msgstr "Ez az extruder lesz beállítva a kiválasztott elemekhez" -msgid "First layer height" -msgstr "Első réteg magasság" +msgid "Change Extruders" +msgstr "Extruderek cseréje" -msgid "" -"First layer height is not valid.\n" -"\n" -"The first layer height will be reset to 0.01." -msgstr "" -"Az első réteg magassága nem érvényes.\n" -"\n" -"Az első réteg magassága 0,01-re áll vissza." +msgid "Set Printable" +msgstr "Nyomtathatóság beállítása" -msgid "First layer nozzle temperature" -msgstr "Fúvóka hőmérséklet első rétegnél" +msgid "Set Unprintable" +msgstr "Nyomtathatatlanság beállítása" -msgid "First layer speed" -msgstr "Sebesség az első rétegnél" +msgid "World coordinates" +msgstr "Világ koordináták" -msgid "First layer volumetric" -msgstr "Az első réteg volumetrikus" +msgid "Local coordinates" +msgstr "Helyi koordináták" -msgid "First object layer over raft interface" -msgstr "Első objektum réteg a tutaj felett" +msgid "Select coordinate space, in which the transformation will be performed." +msgstr "" +"Válassza ki azt a koordináta-térséget, amelyben a transzformáció " +"végrehajtásra kerül." -msgid "Fix through NetFabb" -msgstr "Javítás a NetFabb segítségével" +msgid "Object name" +msgstr "Objektum neve" -msgid "Fixing through NetFabb" -msgstr "Javítás a NetFabb segítségével" +msgid "Position" +msgstr "Pozíció" -msgid "Flash Printer &Firmware" -msgstr "Nyomtató &Firmware Feltöltése" +msgid "Rotation" +msgstr "Forgatás" -msgid "Flash!" -msgstr "Feltöltés!" +msgid "Toggle %c axis mirroring" +msgstr "Bekapcsolt %c tengely tükrözése" -msgid "Flashing cancelled." -msgstr "Feltöltés visszavonva." +msgid "Set Mirror" +msgstr "Tükrözés beállítása" -msgid "Flashing failed" -msgstr "Feltöltés sikertelen" +msgid "Drop to bed" +msgstr "Dobd az ágyra" -msgid "Flashing failed. Please see the avrdude log below." -msgstr "Feltöltés sikertelen! Ellenőrizze az avrdude log-ot lentebb." +msgid "Reset rotation" +msgstr "Forgás visszaállítása" -msgid "Flashing in progress. Please do not disconnect the printer!" -msgstr "Feltöltés folyamatban. Ne távolítsa el a nyomtatót!" +msgid "Reset Rotation" +msgstr "Forgás Visszaállítása" -msgid "Flashing succeeded!" -msgstr "Feltöltés sikeres!" +msgid "Reset scale" +msgstr "Skála visszaállítása" -msgid "Floating reserved operand" -msgstr "Lebegő lefoglalt operandus_" +msgid "Inches" +msgstr "Hüvelyk" -msgid "Flow" -msgstr "Áramlás" +msgid "Scale factors" +msgstr "Mérettényezők" -msgid "Flow rate" -msgstr "Áramlási sebesség" +msgid "Translate" +msgstr "Lefordít" msgid "" -"Following printer preset is duplicated:%1%The above preset for printer \"%2%" -"\" will be used just once." -msgid_plural "" -"Following printer presets are duplicated:%1%The above presets for printer " -"\"%2%\" will be used just once." -msgstr[0] "" -"A következő nyomtató előbeállítás duplikálódott:%1% A fenti előbeállítás a " -"\"%2%\" nyomtatóhoz csak egyszer kerül felhasználásra." -msgstr[1] "" -"A következő nyomtató előbeállítások duplikálódtak:%1% A fenti előbeállítások " -"a \"%2%\" nyomtatóhoz csak egyszer kerülnek felhasználásra." - -msgid "" -"Following printer profiles has no default filament: %1%Please select one " -"manually." -msgstr "" -"A következő nyomtatóprofilokhoz nem tartozik alapértelmezett filament: " -"%1%Kérem, válasszon egyet manuálisan." - -msgid "" -"Following printer profiles has no default material: %1%Please select one " -"manually." +"You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "" -"A következő nyomtatóprofilokhoz nem tartozik alapértelmezett anyag: " -"%1%Kérjük, válasszon egyet manuálisan." +"Nem használhat nem egyenletes méretezési módot több objektum/alkatrész " +"kiválasztásához" -msgid "Folowing model repair failed" -msgid_plural "Folowing models repair failed" -msgstr[0] "A következő modell javítása nem sikerült" -msgstr[1] "A következő modellek javítása nem sikerült" +msgid "Set Position" +msgstr "Pozíció beállítása" -msgid "" -"For a multipart object, this value isn't accurate.\n" -"It doesn't take account of intersections and negative volumes." -msgstr "" -"Egy többrészes objektum esetében ez az érték nem pontos.\n" -"Nem veszi figyelembe a metszeteket és a negatív térfogatokat." +msgid "Set Orientation" +msgstr "Orientáció beállítása" -msgid "For new project all modifications will be reseted" -msgstr "Új projekt esetén az összes módosítás visszaállításra kerül" +msgid "Set Scale" +msgstr "Skála beállítása" msgid "" -"For snug supports, the support regions will be merged using morphological " -"closing operation. Gaps smaller than the closing radius will be filled in." +"The currently manipulated object is tilted (rotation angles are not " +"multiples of 90°).\n" +"Non-uniform scaling of tilted objects is only possible in the World " +"coordinate system,\n" +"once the rotation is embedded into the object coordinates." msgstr "" -"Simulékony támaszok esetén a támaszrégiókat morfológiai zárási művelet " -"segítségével egyesítjük. A zárási sugárnál kisebb hézagok kitöltésre " -"kerülnek." +"Az aktuálisan manipulált objektum megdől (az elforgatási szögek nem 90° " +"többszörösei).\n" +"A ferde objektumok nem egyenletes méretezése csak a " +"világkoordinátarendszerben lehetséges,\n" +"miután a forgatás beágyazódott az objektum koordinátáiba." msgid "" -"for the left button: indicates a non-system (or non-default) preset,\n" -"for the right button: indicates that the settings hasn't been modified." +"This operation is irreversible.\n" +"Do you want to proceed?" msgstr "" -"bal gomb esetén: nem rendszer (vagy nem alapértelmezett) előbeállítás " -"értéket jelez,\n" -"jobb gomb esetén: azt jelzi, hogy a beállításokat nem módosították." +"Ez a művelet visszafordíthatatlan.\n" +"Akarja folytatni?" -msgid "" -"For the Wipe Tower to work with the soluble supports, the support layers " -"need to be synchronized with the object layers." -msgstr "" -"Ahhoz, hogy a törlőtorony működjön az oldható támasztékokkal, a támasztó " -"rétegeket szinkronizálni kell az objektum rétegeivel." +msgid "Additional Settings" +msgstr "További beállítások" -msgid "" -"For the Wipe Tower to work with the soluble supports, the support layers\n" -"need to be synchronized with the object layers." -msgstr "" -"Ahhoz, hogy a törlőtorony működjön az oldható támaszokkal, a " -"támaszrétegeket\n" -"szinkronizálni kell az objektumrétegekkel." +msgid "Remove parameter" +msgstr "Paraméter eltávolítása" -msgid "Force pad around object everywhere" -msgstr "Párna kényszerítése az objektum körül mindenhol" +msgid "Delete Option %s" +msgstr "Opció törlése %s" -msgid "" -"Force solid infill for regions having a smaller area than the specified " -"threshold." -msgstr "" -"Tömör kitöltés használata a megadott küszöbértéknél kisebb területű régiók " -"esetében." +msgid "Change Option %s" +msgstr "Opció változtatása %s" -msgid "" -"Force the generation of solid shells between adjacent materials/volumes. " -"Useful for multi-extruder prints with translucent materials or manual " -"soluble support material." -msgstr "" -"Kényszerítse a tömör héjak létrehozását a szomszédos anyagok/térfogatok " -"között. Hasznos több extruderrel történő áttetsző vagy feloldható anyagokkal " -"való nyomtatáskor." +msgid "View" +msgstr "Nézet" -msgid "" -"Forward-compatibility rule when loading configurations from config files and " -"project files (3MF, AMF)." -msgstr "" -"Előre kompatibilitási szabály konfigurációs és projektfájlokból (3MF, AMF) " -"történő konfiguráció betöltéskor." +msgid "Feature" +msgstr "Funkció" -msgid "Found reserved keywords in" -msgstr "Fenntartott kulcsszavakat találtam az" +msgid "Height" +msgstr "Magasság" -msgid "from" -msgstr "tól" +msgid "Width" +msgstr "Szélesség" -msgid "From" -msgstr "Erről" +msgid "Speed" +msgstr "Sebesség" -msgid "From Object List You can't delete the last solid part from object." -msgstr "" -"Az objektumlistából nem törölheti az utolsó szilárd alkatrészt az " -"objektumból." +msgid "Fan" +msgstr "Hűtés" -msgid "Front" -msgstr "Elöl" +msgid "Fan speed" +msgstr "Ventilátor sebessége" -msgid "Front View" -msgstr "Elölnézet" +msgid "time" +msgstr "idő" -msgid "Full fan speed at layer" -msgstr "Teljes ventilátorsebesség a következő rétegnél" +msgid "Layer time" +msgstr "Réteg idő" -msgid "full profile name" -msgstr "teljes profil név" +msgid "Log time" +msgstr "Naplózási idő" -msgid "Fullscreen" -msgstr "Teljes képernyő" +msgid "Layer time (log)" +msgstr "Réteg idő (log)" -msgid "Fuzzy Skin" -msgstr "Fuzzy bőr" +msgid "Chrono" +msgstr "Kronológia" -msgid "Fuzzy skin (experimental)" -msgstr "Fuzzy bőr (kísérleti)" +msgid "Vol. flow" +msgstr "Térfogatáramlás" -msgid "Fuzzy skin point distance" -msgstr "Fuzzy bőr pont távolság" +msgid "Volumetric flow rate" +msgstr "Térfogatáram" -msgid "Fuzzy skin thickness" -msgstr "Fuzzy bőr vastagság" +msgid "Color" +msgstr "Szín" -msgid "Fuzzy skin type." -msgstr "Fuzzy bőr típusa." +msgid "Temp" +msgstr "Hőfok" -msgid "G-code" -msgstr "G-kód" +msgid "Show" +msgstr "Mutat" -msgid "" -"G-code associated to this tick mark is in a conflict with print mode.\n" -"Editing it will cause changes of Slider data." -msgstr "" -"Az ehhez a jelöléshez tartozó G-kód konfliktusban van a nyomtatási móddal.\n" -"Szerkesztése a Csúszkák adatainak megváltozását okozza." +msgid "Feature types" +msgstr "Jellemző típusok" -msgid "G-code file exported to %1%" -msgstr "G-kód fájl exportálva ide: %1%" +msgid "Internal perimeter" +msgstr "Belső kerület" -msgid "G-code flavor" -msgstr "G-kód változat" +msgid "External perimeter" +msgstr "Külső kerület" -msgid "G-code preview" -msgstr "G-kód előnézet" +msgid "Overhang perimeter" +msgstr "Túlnyúlás kerülete" -msgid "G-code resolution" -msgstr "G-kód felbontása" +msgid "Internal infill" +msgstr "Belső kitöltés" -msgid "G-code substitutions" -msgstr "G-kód helyettesítések" +msgid "Solid infill" +msgstr "Tömör kitöltés" -msgid "G-code viewer" -msgstr "G-kód nézegető" +msgid "Top solid infill" +msgstr "Felső tömör kitöltés" -msgid "g/cm³" -msgstr "g/cm³" +msgid "Ironing" +msgstr "Vasalás" -msgid "g/ml" -msgstr "g/ml" +msgid "Bridge infill" +msgstr "Híd kitöltése" + +msgid "Internal bridge infill" +msgstr "Belső híd kitöltés" + +msgid "Thin wall" +msgstr "Vékony fal" msgid "Gap fill" msgstr "Hézag kitöltés" -msgid "General" -msgstr "Általános" +msgid "Skirt" +msgstr "Szoknya" -msgid "" -"Generate no less than the number of skirt loops required to consume the " -"specified amount of filament on the bottom layer. For multi-extruder " -"machines, this minimum applies to each extruder." -msgstr "" -"A szoknya úgy lesz létrehozva, hogy az alsó rétegen annyi hurokból álljon, " -"hogy legalább az itt meghatározott mennyiségű Filament felhasználásra " -"kerüljön hozzá. Több Extruderrel működő gépek esetén ez a beállítás minden " -"egyes Extruderre vonatkozik." +msgid "Support material" +msgstr "Alátámasztás" -msgid "Generate support material" -msgstr "Támaszanyag létrehozása" +msgid "Support material interface" +msgstr "Támasztóanyag interfész" -msgid "" -"Generate support material for the specified number of layers counting from " -"bottom, regardless of whether normal support material is enabled or not and " -"regardless of any angle threshold. This is useful for getting more adhesion " -"of objects having a very thin or poor footprint on the build plate." -msgstr "" -"Támasztót generál az első megadott számú réteghez, alulról számolva, " -"függetlenül attól, hogy a normál támasz engedélyezve van-e vagy sem, és " -"függetlenül bármilyen szögküszöbtől. Ez hasznos nagyon vékony vagy gyenge " -"talpfelülettel rendelkező objektumok jobb tapadásának eléréséhez a " -"tárgyasztalhoz." +msgid "Wipe tower" +msgstr "Törlő torony" -msgid "Generate supports" -msgstr "Támasztók generálása" +msgid "Mill" +msgstr "Mill" -msgid "Generate supports for the models" -msgstr "Támasztók generálása a modellekhez" +msgid "Retr." +msgstr "Retr." -msgid "generated warnings" -msgstr "generált figyelmeztetések" +msgid "Dere." +msgstr "Dere." -msgid "Generating G-code" -msgstr "G-kód generálása" +msgid "Tool/C" +msgstr "Eszköz/C" -msgid "Generating index buffers" -msgstr "Index puffer generálása" +msgid "Col/C" +msgstr "Col/C" -msgid "Generating pad" -msgstr "Alátét generálása" +msgid "Shells" +msgstr "Héjak" -msgid "Generating perimeters" -msgstr "Kerületek generálása" +msgid "Marker" +msgstr "Jelölés" -msgid "Generating skirt and brim" -msgstr "Szoknya és karima generálása" +msgid "Tool marker" +msgstr "Szerszám jelölés" -msgid "Generating support material" -msgstr "Támaszanyag generálása" +msgid "Legend" +msgstr "Magyarázat" -msgid "Generating support points" -msgstr "Támasztó pontok generálása" +msgid "Legend/Estimated printing time" +msgstr "Magyarázat/becsült nyomtatási idő" -msgid "Generating support tree" -msgstr "Támasztó fa generálása" +msgid "Use for search" +msgstr "Használja keresést" -msgid "Generating toolpaths" -msgstr "Szerszámpályák generálása" +msgid "Category" +msgstr "Kategória" -msgid "Generating vertex buffer" -msgstr "Vertex puffer generálása" +msgid "Search in English" +msgstr "Keressen angolul" -msgid "Gizmo cut" -msgstr "Gizmo vágása" +msgid "Exact pattern" +msgstr "Pontos minta" -msgid "Gizmo FDM paint-on seam" -msgstr "Gizmo FDM varrat festés" +msgid "Arranging" +msgstr "Rendezés" -msgid "Gizmo FDM paint-on supports" -msgstr "Gizmo FDM támaszték festés" +msgid "Could not arrange model objects! Some geometries may be invalid." +msgstr "" +"Nem sikerült elrendezni a modell objektumokat! Egyes geometriák " +"érvénytelenek lehetnek." -msgid "Gizmo move" -msgstr "Gizmo mozgatása" +msgid "Arranging canceled." +msgstr "Elrendezése törölve." -msgid "Gizmo move: Press to snap by 1mm" -msgstr "Gizmo mozgatása: Nyomja meg az 1 mm-rel elmozgatáshoz" +msgid "Arranging done." +msgstr "Elrendezés kész." -msgid "Gizmo Multi Material painting" -msgstr "Gizmo Többanyagú festés" +msgid "ERROR: not enough resources to execute a new job." +msgstr "HIBA: nincs elég erőforrás egy új feladat végrehajtásához." -msgid "Gizmo Place face on bed" -msgstr "Gizmo felület tárgyasztalra illesztése" +msgid "Searching for optimal orientation" +msgstr "Optimális tájolás keresése" -msgid "Gizmo rotate" -msgstr "Gizmo forgatása" +msgid "Orientation search canceled." +msgstr "Tájolás keresés törlésre került." -msgid "Gizmo rotate: Press to rotate selected objects around their own center" -msgstr "" -"Gizmo forgatása: Nyomja meg a kiválasztott objektumok saját középpontjuk " -"körül történő elforgatásához" +msgid "Orientation found." +msgstr "Táájolás megvan." -msgid "Gizmo scale" -msgstr "Gizmo skálázása" +msgid "Choose SLA archive:" +msgstr "SLA archívum választása:" -msgid "Gizmo scale: Press to activate one direction scaling" -msgstr "Gizmo skálázása: Nyomja meg az egyirányú skálázás aktiválásához" +msgid "Import file" +msgstr "Fájl importálása" -msgid "Gizmo scale: Press to scale selected objects around their own center" -msgstr "" -"Gizmo skálázása: Nyomja meg a kiválasztott objektumok saját középpontjuk " -"körüli skálázásához" +msgid "Import model and profile" +msgstr "Modell és profil importálása" -msgid "Gizmo scale: Press to snap by 5%" -msgstr "Gizmo mozgatása: Nyomja meg az 5%-kal elmozgatáshoz" +msgid "Import profile only" +msgstr "Csak profil importálása" -msgid "Gizmo scale: Scale selection to fit print volume" -msgstr "" -"Gizmo skálázása: A kiválasztás skálázása a nyomtatási térfogathoz igazodva" +msgid "Import model only" +msgstr "Csak importált modell" -msgid "Gizmo SLA hollow" -msgstr "Gizmo SLA üreg" +msgid "Accurate" +msgstr "Pontos" -msgid "Gizmo SLA support points" -msgstr "Gizmo SLA támaszték pontok" +msgid "Balanced" +msgstr "Kiegyenlített" -msgid "Gizmo-Move" -msgstr "Gizmo-Mozgatása" +msgid "Quick" +msgstr "Gyors" -msgid "Gizmo-Place on Face" -msgstr "Gizmo- Felület Tárgyasztalra Illesztése" +msgid "Importing SLA archive" +msgstr "SLA archívum importálása" -msgid "Gizmo-Rotate" -msgstr "Gizmo-Forgatása" +msgid "Importing canceled." +msgstr "Importálás törölve." -msgid "Gizmo-Scale" -msgstr "Gizmo-Skála" +msgid "Importing done." +msgstr "Importálás kész." -msgid "Gizmos" -msgstr "Gizmok" - -msgid "GNU Affero General Public License, version 3" -msgstr "GNU Affero General Public License, 3-as verzió" +msgid "You cannot load SLA project with a multi-part object on the bed" +msgstr "Nem tölthet be SLA projektet több részből álló objektummal az ágyon" -msgid "" -"Good precision is required, so use a caliper and do multiple measurements " -"along the filament, then compute the average." +msgid "Please check your object list before preset changing." msgstr "" -"Jó pontosság szükséges, ezért használjon tolómérőt, és végezzen többszöri " -"mérést a filament mentén, majd számítsa ki az átlagot." +"Kérjük, ellenőrizze az objektumlistát, mielőtt megváltoztatja az " +"előbeállításokat." -msgid "Grid" -msgstr "Háló" +msgid "Keyboard Shortcuts" +msgstr "Billentyűparancsok" -msgid "Group" -msgstr "Csoport" +msgid "New project, clear platter" +msgstr "Új projekt, tiszta ágy" -msgid "Group manipulation" -msgstr "Csoport manipuláció" +msgid "Open project STL/OBJ/AMF/3MF with config, clear platter" +msgstr "STL/OBJ/AMF/3MF projekt megnyitása konfigurációval, tiszta ággyal" -msgid "GUI" -msgstr "GUI" +msgid "Save project (3mf)" +msgstr "Projekt mentése (3mf)" -msgid "Gyroid" -msgstr "Gyroid" +msgid "Save project as (3mf)" +msgstr "Projekt mentése mint (3mf)" -msgid "Head diameter" -msgstr "Fej átmérő" +msgid "(Re)slice" +msgstr "(Újra)szeletelés" -msgid "Head penetration" -msgstr "Fej benyúlás" +msgid "Import STL/OBJ/AMF/3MF without config, keep platter" +msgstr "STL/OBJ/AMF/3MF importálása konfiguráció nélkül, ágy megtartása" -msgid "Head penetration should not be greater than the head width." -msgstr "A fej benyúlása nem lehet nagyobb, mint a fej szélessége." +msgid "Import Config from ini/amf/3mf/gcode" +msgstr "Konfiguráció importálása ini/amf/3mf/gcode-ból" -msgid "Height" -msgstr "Magasság" +msgid "Load Config from ini/amf/3mf/gcode and merge" +msgstr "Konfiguráció betöltése az ini/amf/3mf/gcode fájlból és összevonás" -msgid "Height (mm)" -msgstr "Magasság (mm)" +msgid "Export G-code" +msgstr "G-kód exportálása" -msgid "Height of the display" -msgstr "Kijelző magassága" +msgid "Send G-code" +msgstr "G-kód küldése" -msgid "Height ranges" -msgstr "Magasságtartományok" +msgid "Export config" +msgstr "Konfiguráció exportálása" -msgid "Height:" -msgstr "Magasság:" +msgid "Export to SD card / Flash drive" +msgstr "Exportálás SD-kártyára / pendrive-ra" -msgid "Heights at which a filament change is to occur. " -msgstr "Magasságok, amelyeken filamenteket kell váltani. " +msgid "Eject SD card / Flash drive" +msgstr "SD-kártya / pendrive kivétele" -msgid "" -"Hello, welcome to %s! This %s helps you with the initial configuration; just " -"a few settings and you will be ready to print." -msgstr "" -"Üdvözli a %s! Ez a %s segít a kezdeti beállításokban. Csak néhány beállítás, " -"és máris nyomtathat." +msgid "Select all objects" +msgstr "Minden objektum kijelölése" -msgid "Help" -msgstr "Súgó" +msgid "Deselect all" +msgstr "Minden kijelölés törlése" -msgid "Help (FFF options)" -msgstr "Súgó (FFF lehetőségek)" +msgid "Delete selected" +msgstr "Kijelöltek törlése" -msgid "Help (SLA options)" -msgstr "Súgó (SLA lehetőségek)" +msgid "Copy to clipboard" +msgstr "Másolás vágólapra" -msgid "" -"Here you can adjust required purging volume (mm³) for any given pair of " -"tools." -msgstr "" -"Itt állíthatja be a szükséges öblítési térfogatot (mm³) bármely adott " -"szerszámpárhoz." +msgid "Paste from clipboard" +msgstr "Beillesztés vágólapról" -msgid "Hide ruler" -msgstr "Vonalzó elrejtése" +msgid "Reload platter from disk" +msgstr "Tálca újratöltése lemezről" -msgid "High extruder current on filament swap" -msgstr "Magas extruderáram a szálcserénél" +msgid "Select 3d editor Tab" +msgstr "Válasszon 3d editor lapot" -msgid "Higher print quality versus higher print speed." -msgstr "Jobb nyomtatási minőség vagy nagyobb nyomtatási sebesség." +msgid "Select Layer Preview Tab" +msgstr "Rétegelőnézet lap kiválasztása" -msgid "Highlight overhang by angle" -msgstr "Túlnyúlás kijelölése szöggel" +msgid "Select Gcode preview Tab" +msgstr "Válassza ki a Gcode előnézet lapot" -msgid "Hilbert Curve" -msgstr "Hilbert-görbe" +msgid "Select Print Settings Tab" +msgstr "Válassza a Nyomtatási beállítások lapot" -msgid "Hold Shift to Slice & Export G-code" -msgstr "Tartsa lenyomva a Shiftet szeleteléshez és a G-kód exportálásához" +msgid "Select Filament Settings Tab" +msgstr "Válassza a Szálbeállítások lapot" -msgid "Hole depth" -msgstr "Furat mélység" +msgid "Select Printer Settings Tab" +msgstr "Válassza ki a Nyomtató beállításai lapot" -msgid "Hole diameter" -msgstr "Furat átmérő" +msgid "Print host upload queue" +msgstr "Host feltöltési várólista nyomtatása" -msgid "Hollow and drill" -msgstr "Üregelés és fúrás" +msgid "Open new instance" +msgstr "Új példány megnyitása" -msgid "Hollow out a model to have an empty interior" -msgstr "Üregesítse a modellt, hogy üres legyen a belseje" +msgid "Camera view" +msgstr "Kameranézet" -msgid "Hollow this object" -msgstr "Objektum üregessé tétele" +msgid "Show/Hide object/instance labels" +msgstr "Objektum/instance címkék megjelenítése/elrejtése" -msgid "Hollowing" -msgstr "Üregesítés" +msgid "Preferences" +msgstr "Beállítások" + +msgid "Show keyboard shortcuts list" +msgstr "Billentyűparancsok listájának megjelenítése" + +msgid "Commands" +msgstr "Parancsok" + +msgid "Add Instance of the selected object" +msgstr "A kiválasztott objektum példányának hozzáadása" + +msgid "Remove Instance of the selected object" +msgstr "A kiválasztott objektum példányának eltávolítása" msgid "" -"Hollowing is done in two steps: first, an imaginary interior is calculated " -"deeper (offset plus the closing distance) in the object and then it's " -"inflated back to the specified offset. A greater closing distance makes the " -"interior more rounded. At zero, the interior will resemble the exterior the " -"most." +"Press to select multiple objects\n" +"or move multiple objects with mouse" msgstr "" -"Az üregesítés két lépésben történik: először egy mélyebb képzeletbeli belső " -"teret számolunk ki az objektum belsejében (ofszet plusz a zárótávolság), " -"majd azt visszatöltjük a megadott eltolásig. A nagyobb zárótávolság " -"lekerekíti a belső teret. Nulla értéknél a belső tér leginkább a külsőhöz " -"fog hasonlítani." +"Nyomja meg a gombot több objektum kiválasztásához\n" +"vagy több objektum mozgatása az egérrel" -msgid "Hollowing model" -msgstr "Modell üregesítése" +msgid "Press to activate selection rectangle" +msgstr "Nyomja meg a kiválasztási téglalap aktiválásához" -msgid "Hollowing parameter change" -msgstr "Üregesítési paraméter megváltoztatása" +msgid "Press to activate deselection rectangle" +msgstr "Nyomja meg a kijelölés megszüntetése téglalap aktiválásához" -msgid "Honeycomb" -msgstr "Méhsejt" +msgid "Arrow Up" +msgstr "Nyíl fel" -msgid "Horizontal shells" -msgstr "Vízszintes héjak" +msgid "Move selection 10 mm in positive Y direction" +msgstr "Mozgassa a kijelölést 10 mm-rel pozitív Y irányba" -msgid "Horizontal Slider" -msgstr "Vízszintes Csúszka" +msgid "Arrow Down" +msgstr "Nyíl le" -msgid "Horizontal slider - Move active thumb Left" -msgstr "Vízszintes csúszka - Aktív jelölő mozgatása Balra" +msgid "Move selection 10 mm in negative Y direction" +msgstr "Mozgassa a kijelölést 10 mm-rel negatív Y irányba" -msgid "Horizontal slider - Move active thumb Right" -msgstr "Vízszintes csúszka - Aktív jelölő mozgatása Jobbra" +msgid "Arrow Left" +msgstr "Nyíl balra" -msgid "Host" -msgstr "Gazda" +msgid "Move selection 10 mm in negative X direction" +msgstr "Mozgassa a kijelölést 10 mm-rel negatív X irányba" -msgid "Host Type" -msgstr "Gazda Típus" +msgid "Arrow Right" +msgstr "Nyíl jobbra" -msgid "Hostname" -msgstr "Hostnév" +msgid "Move selection 10 mm in positive X direction" +msgstr "Mozgassa a kijelölést 10 mm-rel pozitív X irányba" -msgid "Hostname, IP or URL" -msgstr "Gazdanév, IP vagy URL" +msgid "Any arrow" +msgstr "Bármelyik nyíl" -msgid "" -"Hover the cursor over buttons to find more information \n" -"or click this button." -msgstr "" -"További információért vigye a kurzort a gombok fölé, \n" -"vagy kattintson erre a gombra." +msgid "Movement step set to 1 mm" +msgstr "Mozgási lépés 1 mm-re állítva" -msgid "How far should the pad extend around the contained geometry" -msgstr "Milyen messzire terjedjen ki a párna az körbevett geometria körül" +msgid "Movement in camera space" +msgstr "Mozgás a kamera térben" -msgid "How much should the tiny connectors penetrate into the model body." -msgstr "Az apró összekötőknek mennyire kell benyúlniuk a modell testébe." +msgid "Page Up" +msgstr "Oldal fel" -msgid "How much the pinhead has to penetrate the model surface" -msgstr "Mennyire kell a tűhegynek benyúlnia a modell felületébe" +msgid "Rotate selection 45 degrees CCW" +msgstr "A kiválasztás elforgatása 45 fokkal CCW" -msgid "How to apply limits" -msgstr "Hogyan kell alkalmazni a korlátokat" +msgid "Page Down" +msgstr "Oldal le" -msgid "HTTP digest" -msgstr "HTTP azonosító" +msgid "Rotate selection 45 degrees CW" +msgstr "A kiválasztás elforgatása 45 fokkal CW" -msgid "" -"HTTP status: %1%\n" -"Message body: \"%2%\"" -msgstr "" -"HTTP status: %1%\n" -"Message body: \"%2%\"" +msgid "Gizmo move" +msgstr "Gizmo mozgás" -msgid "HTTPS CA File" -msgstr "HTTPS CA Fájl" +msgid "Gizmo scale" +msgstr "Gizmo skála" -msgid "" -"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" -"signed certificate." -msgstr "" -"A HTTPS CA fájl opcionális. Csak akkor van rá szükség, ha a HTTPS-t saját " -"aláírású tanúsítvánnyal használja." +msgid "Gizmo rotate" +msgstr "Gizmo forgatás" -msgid "Icon size in a respect to the default size" -msgstr "Az ikonok mérete az alapértelmezett mérethez képest" +msgid "Gizmo cut" +msgstr "Gizmo vágás" -msgid "ID" -msgstr "Azonosító" +msgid "Gizmo Place face on bed" +msgstr "Gizmo Helyezze az arcát az ágyra" -msgid "" -"If checked, supports will be generated automatically based on the overhang " -"threshold value. If unchecked, supports will be generated inside the " -"\"Support Enforcer\" volumes only." -msgstr "" -"Ha be van jelölve, a támaszok automatikusan generálódnak a túlnyúlás " -"küszöbértéke alapján. Ha nincs bejelölve, a támaszok csak a \"Támaszték " -"Kényszerítők\" térfogatokon belül lesznek generálva." +msgid "Gizmo SLA hollow" +msgstr "Gizmo SLA üreges" -msgid "" -"If enabled, %s checks for new application versions online. When a new " -"version becomes available, a notification is displayed at the next " -"application startup (never during program usage). This is only a " -"notification mechanisms, no automatic installation is done." -msgstr "" -"Ha engedélyezve van, a %s online ellenőrzi az új alkalmazásverziókat. Amikor " -"új verzió válik elérhetővé, az alkalmazás következő indításakor értesítés " -"jelenik meg (program használata közben soha). Ez csak egy értesítési " -"mechanizmus, nem történik automatikus telepítés." +msgid "Gizmo SLA support points" +msgstr "Gizmo SLA támasztási pontok" -msgid "" -"If enabled, %s downloads updates of built-in system presets in the " -"background.These updates are downloaded into a separate temporary location." -"When a new preset version becomes available it is offered at application " -"startup." -msgstr "" -"Ha engedélyezve van, a %s a háttérben letölti a beépített előbeállítások " -"frissítéseit. Ezek a frissítések egy külön ideiglenes helyre kerülnek " -"letöltésre. Amikor egy új előbeállítások verzió elérhetővé válik, azt az " -"alkalmazás a következő indításkor felajánlja." +msgid "Unselect gizmo or clear selection" +msgstr "Gizmo kijelölésének megszüntetése vagy a kijelölés törlése" -msgid "If enabled, a repetition of the next random color will be allowed." -msgstr "" -"Ha engedélyezve van, a következő véletlenszerű szín megegyezhet az " -"aktuálissal." +msgid "Change camera type (perspective, orthographic)" +msgstr "Kamera típusának módosítása (perspektíva, ortográfiai)" -msgid "" -"If enabled, all printing extruders will be primed at the front edge of the " -"print bed at the start of the print." -msgstr "" -"Ha engedélyezve van, akkor a nyomtatás kezdetén az összes nyomtató extruder " -"előkészítésre kerül a tárgyasztal elülső szélénél." +msgid "Zoom to Bed" +msgstr "Nagyítás az ágyra" msgid "" -"If enabled, allows the Reload from disk command to automatically find and " -"load the files when invoked." +"Zoom to selected object\n" +"or all objects in scene, if none selected" msgstr "" -"Ha engedélyezve van, lehetővé teszi, hogy az Újratöltés lemezről parancs " -"automatikusan megkeresse és betöltse a fájlokat meghivatkozáskor." +"Nagyítás kiválasztott objektumra\n" +"vagy minden objektumra a jelenetben, ha egyik sincs kijelölve" -msgid "" -"If enabled, allows the Reload from disk command to automatically find and " -"load the files when invoked.\n" -"If not enabled, the Reload from disk command will ask to select each file " -"using an open file dialog." -msgstr "" -"Ha engedélyezve van, akkor az Újratöltés lemezről parancs automatikusan " -"megkeres1 és betölti a fájlokat meghívásakor.\n" -"Ha nincs engedélyezve, az Újratöltés lemezről parancs kérni fogja az egyes " -"fájlok kiválasztását a fájl megnyitása párbeszédpanelen." +msgid "Zoom in" +msgstr "Nagyítás" -msgid "" -"If enabled, application will use the standard Windows system menu,\n" -"but on some combination of display scales it can looks ugly. If disabled, " -"old UI will be used." -msgstr "" -"Ha engedélyezve van, az alkalmazás a Windows szabványos rendszermenüjét " -"fogja használni, \n" -"de a kijelző egyes méretarányainak kombinációján ez csúnyán nézhet ki. \n" -"Ha kikapcsolva, a régi felhasználói felületet használja." +msgid "Zoom out" +msgstr "Kicsinyítés" -msgid "" -"If enabled, changes made using the sequential slider, in preview, apply only " -"to gcode top layer. If disabled, changes made using the sequential slider, " -"in preview, apply to the whole gcode." -msgstr "" -"Ha engedélyezve van, a szekvenciális csúszkával végzett módosítások az " -"előnézetben csak a g-kód legfelső rétegére vonatkoznak. Ha letiltja, a " -"szekvenciális csúszkával végzett módosítások az előnézetben a teljes g-kódra " -"vonatkoznak." +msgid "Switch between Editor/Preview" +msgstr "Váltás szerkesztő/előnézet között" -msgid "If enabled, PrusaSlicer will be open at the position it was closed" -msgstr "" -"Ha engedélyezve van, a PrusaSlicer azon a helyen fog megnyílni, ahol bezárták" +msgid "Switch between Tab" +msgstr "Lapok közötti váltás" -msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser." -msgstr "" -"Ha engedélyezve van, a PrusaSlicer nem nyitja meg a hiperhivatkozásokat a " -"böngészőjében." +msgid "Collapse/Expand the sidebar" +msgstr "Oldalsáv összezárása/nagyítása" -msgid "If enabled, random sequence of the selected extruders will be used." +msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" msgstr "" -"Ha engedélyezve van, a kiválasztott extruderek véletlenszerű sorrendjét " -"fogja használni." +"3Dconnexion eszközök beállításai párbeszédpanel megjelenítése/elrejtése, ha " +"engedélyezve van" -msgid "If enabled, renders object using the environment map." +msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" -"Ha engedélyezve van, az objektumot a környezeti térkép használatával " -"rendereli." +"3Dconnexion eszközök beállításai párbeszédpanel megjelenítése/elrejtése" -msgid "If enabled, reverses the direction of zoom with mouse wheel" -msgstr "Ha engedélyezve van, az egérgörgő zoom iránya megfordul" +msgid "Platter" +msgstr "Tálca" -msgid "" -"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " -"will be used." -msgstr "" -"Ha engedélyezve van, a Beállítások fülek menüelemként jelennek meg. Ha le " -"van tiltva, a régi felhasználói felület kerül megjelenítésre." +msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" +msgstr "Minden kütyü: Pásztázás - jobb egérgomb" -msgid "" -"If enabled, Slic3r downloads updates of built-in system presets in the " -"background. These updates are downloaded into a separate temporary location. " -"When a new preset version becomes available it is offered at application " -"startup." -msgstr "" -"Ha engedélyezve van, a Slic3er a háttérben letölti a beépített " -"Előbeállítások frissítéseit. Ezek a frissítések egy külön ideiglenes helyre " -"kerülnek letöltésre. Amikor egy új előbeállítások verzió elérhetővé válik, " -"azt az alkalmazás a következő indításkor felajánlja." +msgid "Gizmo move: Press to snap by 1mm" +msgstr "Gizmo mozdulat: Nyomja meg, hogy 1 mm-rel elpattanjon" -msgid "" -"If enabled, the 3D scene will be rendered in Retina resolution. If you are " -"experiencing 3D performance problems, disabling this option may help." -msgstr "" -"Ha engedélyezve van, a 3D jelenet Retina felbontásban kerül megjelenítésre. " -"Ha 3D-s teljesítményproblémák merülnek fel, ennek az opciónak a letiltása " -"segíthet." +msgid "Gizmo scale: Press to snap by 5%" +msgstr "Gizmo skála: 5%-kal történő elpattintáshoz nyomja meg" -msgid "" -"If enabled, the axes names and axes values will be colorized according to " -"the axes colors. If disabled, old UI will be used." -msgstr "" -"Ha engedélyezve van, a tengelyek nevei és értékei a tengelyek színének " -"megfelelően lesznek színezve.\n" -"Ha le van tiltva, akkor a régi felhasználói felület marad aktív." +msgid "Gizmo scale: Scale selection to fit print volume" +msgstr "Gizmo skála: Méretválasztás a nyomtatási térfogathoz igazodva" -msgid "" -"If enabled, the button for the collapse sidebar will be appeared in top " -"right corner of the 3D Scene" -msgstr "" -"Ha engedélyezve van, az oldalsáv összecsukása gombja megjelenik a 3D jelenet " -"jobb felső sarkában" +msgid "Gizmo scale: Press to activate one direction scaling" +msgstr "Gizmo skála: Nyomja meg az egyirányú skálázás aktiválásához" -msgid "" -"If enabled, the legacy 3DConnexion devices settings dialog is available by " -"pressing CTRL+M" +msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" -"Ha engedélyezve van, a régi 3DConnexion eszközök beállításai párbeszédablak " -"elérhető a CTRL+M billentyűkombináció megnyomásával" +"Gizmo skála: Nyomja meg a kiválasztott objektumok saját középpontjuk körüli " +"méretezéséhez" -msgid "" -"If enabled, the wipe tower will not be printed on layers with no " -"toolchanges. On layers with a toolchange, extruder will travel downward to " -"print the wipe tower. User is responsible for ensuring there is no collision " -"with the print." +msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" -"Ha engedélyezve van, akkor törlőtorony nem kerül kinyomtatásra " -"szerszámváltás nélküli rétegeken. A szerszámcserével rendelkező rétegeken az " -"extruder az aktuális magasság alá süllyed a törlőtorony nyomtatásához. A " -"felhasználó felelős azért, hogy ez ne okozzon ütközést a nyomtatás során." +"Gizmo forog: Nyomja meg a kiválasztott objektumok saját középpontjuk körül " +"történő elforgatásához" + +msgid "Gizmos" +msgstr "Gizmók" msgid "" -"If enabled, UI will use Dark mode colors. If disabled, old UI will be used." +"The following shortcuts are applicable when the specified gizmo is active" msgstr "" -"Ha engedélyezve van, a felhasználói felület a sötét mód színeit használja. " -"Ha le van tiltva, a régi felhasználói felület marad aktív." +"A következő parancsikonok akkor alkalmazhatók, ha a megadott szerkentyű aktív" -msgid "If enabled, use free camera. If not enabled, use constrained camera." -msgstr "" -"Ha engedélyezve van, szabad kamerát használ. Ha nincs engedélyezve, akkor " -"kötött kamerát használ." +msgid "Open a G-code file" +msgstr "G-kód fájl megnyitása" -msgid "" -"If enabled, use perspective camera. If not enabled, use orthographic camera." -msgstr "" -"A program perspektivikus kamerát használ, ha engedélyezve van. Ha nincs " -"engedélyezve, akkor ortografikusat." +msgid "Reload the platter from disk" +msgstr "Lemez újratöltése lemezről" -msgid "If enabled, useful hints are displayed at startup." -msgstr "Ha engedélyezve van, hasznos tippek jelennek meg indításkor." +msgid "Vertical slider - Move active thumb Up" +msgstr "Függőleges csúszka - Az aktív hüvelykujj felfelé mozgatása" -msgid "" -"If enabled, volumes will be always ordered inside the object. Correct order " -"is Model Part, Negative Volume, Modifier, Support Blocker and Support " -"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " -"Modifiers. But one of the model parts have to be on the first place." -msgstr "" -"Ha engedélyezve van, a térfogatok mindig az objektumon belül lesznek " -"rendezve. A helyes sorrend: Modellalkatrész, Negatív térfogat, Módosító, " -"Támaszték blokkoló és Támaszték kényszerítő. Ha ki van kapcsolva, akkor a " -"Modellalkatrész, a Negatív térfogat és a Módosító átrendezhető. De az első " -"helyen az egyik Modellalkatrésznek kell lennie." +msgid "Vertical slider - Move active thumb Down" +msgstr "Függőleges csúszka - Az aktív hüvelykujj lefelé mozgatása" -msgid "If enabled, you can change size of toolbar icons manually." -msgstr "" -"Ha engedélyezve van, manuálisan módosíthatja az eszköztár ikonjainak méretét." +msgid "Horizontal slider - Move active thumb Left" +msgstr "Vízszintes csúszka - Az aktív hüvelykujj balra mozgatása" -msgid "" -"If this is enabled, Slic3r will auto-center objects around the print bed " -"center." -msgstr "" -"Ha ez engedélyezve van, a Slic3r automatikusan középre igazítja az " -"objektumokat a tárgyasztal közepe körül." +msgid "Horizontal slider - Move active thumb Right" +msgstr "Vízszintes csúszka - Az aktív hüvelykujj jobbra mozgatása" -msgid "" -"If this is enabled, Slic3r will pre-process objects as soon as they're " -"loaded in order to save time when exporting G-code." -msgstr "" -"Ha ez engedélyezve van, a Slic3r a betöltés után azonnal előfeldolgozza az " -"objektumokat, hogy időt takarítson meg a G-kód exportálásakor." +msgid "On/Off one layer mode of the vertical slider" +msgstr "Függőleges csúszka egy rétegű módjának be/ki kapcsolása" -msgid "" -"If this is enabled, Slic3r will prompt the last output directory instead of " -"the one containing the input files." -msgstr "" -"Ha ez engedélyezve van, a Slic3r megjegyzi az utolsó kimeneti mappát, és azt " -"használja a bemeneti fájlokat tartalmazó mappa helyett." +msgid "Show/Hide Legend and Estimated printing time" +msgstr "Legenda és becsült nyomtatási idő megjelenítése/elrejtése" -msgid "" -"If you set this to a positive value, Z is quickly raised every time a " -"retraction is triggered. When using multiple extruders, only the setting for " -"the first extruder will be considered." -msgstr "" -"Ha ezt pozitív értékre állítja, a Z minden alkalommal gyorsan megemelkedik, " -"a visszahúzás aktiválásakor. Több extruder használata esetén csak az első " -"extruder beállítása lesz figyelembe véve." +msgid "Upper layer" +msgstr "Felső réteg" -msgid "" -"If you set this to a positive value, Z lift will only take place above the " -"specified absolute Z. You can tune this setting for skipping lift on the " -"first layers." -msgstr "" -"Ha ezt pozitív értékre állítja, a Z emelés csak a megadott abszolút Z felett " -"történik. Ezzel a beállítással ez emeléseket első rétegeknél kihagyhatja." +msgid "Lower layer" +msgstr "Alsó réteg" -msgid "" -"If you set this to a positive value, Z lift will only take place below the " -"specified absolute Z. You can tune this setting for limiting lift to the " -"first layers." -msgstr "" -"Ha ezt pozitív értékre állítja, a Z emelés csak a megadott abszolút Z alatt " -"történik. Ezzel a beállítással az emeléseket az első rétegekre korlátozhatja." +msgid "Upper Layer" +msgstr "Felső Réteg" -msgid "" -"If you want to process the output G-code through custom scripts, just list " -"their absolute paths here. Separate multiple scripts with a semicolon. " -"Scripts will be passed the absolute path to the G-code file as the first " -"argument, and they can access the Slic3r config settings by reading " -"environment variables." -msgstr "" -"Ha a kimeneti G-kódot egyéni szkriptekkel akarja feldolgozni, akkor itt adja " -"meg az abszolút elérési útvonalakat. Több szkriptet pontosvesszővel " -"választhat el egymástól. A szkriptek első argumentumként a G-kód fájl " -"abszolút elérési útvonalát kapják meg, és a környezeti változók olvasásával " -"hozzáférhetnek a Slic3r konfigurációs beállításaihoz." +msgid "Lower Layer" +msgstr "Alsó Réteg" -msgid "" -"If your firmware doesn't handle the extruder displacement you need the G-" -"code to take it into account. This option lets you specify the displacement " -"of each extruder with respect to the first one. It expects positive " -"coordinates (they will be subtracted from the XY coordinate)." -msgstr "" -"Ha az ön firmware nem kezeli az extruderek egymáshoz viszonyított helyzetét, " -"akkor a G-kódnak kell ezt figyelembe vennie. Ezzel az opcióval megadhatja az " -"egyes extruderek előzőhöz viszonyított helyzetét. Pozitív koordinátákat vár " -"(ezek le lesznek vonva az XY koordinátából)." +msgid "Show/Hide Legend & Estimated printing time" +msgstr "Megjelenítés/Magyarázat elrejtése & becsült nyomtatási idő" -msgid "" -"If your firmware requires relative E values, check this, otherwise leave it " -"unchecked. Most firmwares use absolute values." -msgstr "" -"Ha a firmware relatív E értékeket igényel, jelölje be ezt a lehetőséget, " -"egyébként hagyja üresen. A legtöbb firmware abszolút értékeket használ." +msgid "Preview" +msgstr "Előnézet" -msgid "Ignore HTTPS certificate revocation checks" -msgstr "Visszavont HTTPS tanúsítvány ellenőrzésének figyelmen kívül hagyása" +msgid "Move active thumb Up" +msgstr "Aktív hüvelykujj felfelé mozgatása" -msgid "" -"Ignore HTTPS certificate revocation checks in case of missing or offline " -"distribution points. One may want to enable this option for self signed " -"certificates if connection fails." -msgstr "" -"Visszavont HTTPS-tanúsítvány ellenőrzésének figyelmen kívül hagyása hiányzó " -"vagy offline terjesztési pontok esetén. Ezt az opciót saját aláírású " -"tanúsítványok esetén érdemes engedélyezni, ha a kapcsolat nem sikerül." +msgid "Move active thumb Down" +msgstr "Aktív hüvelykujj lefelé mozgatása" -msgid "Ignore non-existent config files" -msgstr "Nem létező konfigurációs fájlok figyelmen kívül hagyása" +msgid "Set upper thumb as active" +msgstr "Felső hüvelykujj aktívként való beállítása" -msgid "Ignores facets facing away from the camera." -msgstr "" -"Figyelmen kívül hagyja a kamerával ellentétes irányba néző felületeket." +msgid "Set lower thumb as active" +msgstr "Alsó hüvelykujj aktívként való beállítása" -msgid "Illegal instruction" -msgstr "Illegális utasítás" +msgid "Add color change marker for current layer" +msgstr "Színváltoztatási jelölő hozzáadása az aktuális réteghez" -msgid "Import" -msgstr "Importálás_" +msgid "Delete color change marker for current layer" +msgstr "Aktuális réteg színváltoztatási jelölőjének törlése" -msgid "Import &Config" -msgstr "Konfiguráció Importálása" +msgid "Move current slider thumb Up" +msgstr "Aktuális csúszka hüvelykujjának mozgatása Felfelé" -msgid "Import Config &Bundle" -msgstr "Konfigurációs Csomag Importálása" +msgid "Move current slider thumb Down" +msgstr "Aktuális csúszka hüvelykujj lefelé mozgatása" -msgid "Import Config from &Project" -msgstr "Konfiguráció Importálása Projektből" +msgid "Set upper thumb to current slider thumb" +msgstr "Felső hüvelykujj beállítása az aktuális csúszka hüvelykujjához" -msgid "Import Config from ini/amf/3mf/gcode" -msgstr "Konfiguráció importálása ini/amf/3mf/gcode fájlból" +msgid "Set lower thumb to current slider thumb" +msgstr "Az alsó hüvelykujj beállítása az aktuális csúszka hüvelykujjához" -msgid "Import config only" -msgstr "Csak a konfiguráció importálása" +msgid "" +"Press to speed up 5 times while moving thumb\n" +"with arrow keys or mouse wheel" +msgstr "" +"Nyomja meg 5-ször a gyorsításhoz, miközben a hüvelykujját mozgatja\n" +"a nyílbillentyűkkel vagy az görgővel" -msgid "Import file" -msgstr "Fájl importálása" +msgid "Vertical Slider" +msgstr "Függőleges csúszka" -msgid "Import geometry only" -msgstr "Csak geometria importálása" +msgid "" +"The following shortcuts are applicable in G-code preview when the vertical " +"slider is active" +msgstr "" +"A következő parancsikonok alkalmazhatók a G-kód előnézetben, ha a függőleges " +"csúszka aktív" -msgid "Import model and profile" -msgstr "Modell és profil importálása" +msgid "Move active thumb Left" +msgstr "Az aktív hüvelykujj balra mozgatása" -msgid "Import model only" -msgstr "Csak modell importálása" +msgid "Move active thumb Right" +msgstr "Az aktív hüvelykujj jobbra mozgatása" -msgid "Import Object" -msgstr "Objektum Importálása" +msgid "Set left thumb as active" +msgstr "Bal hüvelykujj aktívnak állítása" -msgid "Import Objects" -msgstr "Objektumok Importálása" +msgid "Set right thumb as active" +msgstr "Jobb hüvelykujj aktívnak állítása" -msgid "Import of the repaired 3mf file failed" -msgstr "A javított 3mf fájl importálása nem sikerült" +msgid "Move active slider thumb Left" +msgstr "Aktív csúszka hüvelykujj balra mozgatása" -msgid "Import profile only" -msgstr "Csak profil importálása" +msgid "Move active slider thumb Right" +msgstr "Aktív csúszka hüvelykujj jobbra mozgatása" -msgid "Import SL1 / SL1S Archive" -msgstr "SL1 / SL1S Archív Importálása" +msgid "Horizontal Slider" +msgstr "Vízszintes csúszka" -msgid "Import SLA archive" -msgstr "SLA archívum importálása" +msgid "" +"The following shortcuts are applicable in G-code preview when the horizontal " +"slider is active" +msgstr "" +"A következő parancsikonok alkalmazhatók a G-kód előnézetben, ha a vízszintes " +"csúszka aktív" -msgid "Import STL (Imperial Units)" -msgstr "STL (Angolszász mértékegységek) Importálása" +msgid "Open a new %s instance" +msgstr "Új %s példány megnyitása" -msgid "Import STL/OBJ/AM&F/3MF" -msgstr "STL/OBJ/AM&F/3MF Importálása" +msgid "G-code preview" +msgstr "G-kód előnézet" -msgid "Importing canceled." -msgstr "Importálás megszakítva." +msgid "Open G-code viewer" +msgstr "Megnyitja a G-kód nézegetőt" -msgid "Importing done." -msgstr "Importálás kész." +msgid "Open %s" +msgstr "Megnyitás: %s" -msgid "Importing SLA archive" -msgstr "SLA archívum importálása" +msgid "Open new G-code viewer" +msgstr "Új G-kód nézegető megnyitása" -msgid "in" -msgstr "in" +msgid "Remember to check for updates at %s" +msgstr "Ne felejtse el ellenőrizni a frissítéseket %s" -msgid "In the custom G-code were found reserved keywords:" -msgstr "Az egyéni G-kódban foglalt kulcsszavak találhatók:" +msgid "3D view" +msgstr "3D nézet" -msgid "In this mode you can select only other %s Items%s" -msgstr "Ebben az módban csak másik %s elemeket lehet kiválasztani %s" +msgid "Sliced preview" +msgstr "Szeletelt előnézet" -msgid "Inches" -msgstr "Angolszász" +msgid "Gcode preview" +msgstr "G-kód előnézet" -msgid "Incompatible bundles:" -msgstr "Nem kompatibilis csomagok:" +msgid "%s Releases" +msgstr "%s Kiadványok" -msgid "Incompatible presets" -msgstr "Nem kompatibilis előbeállítások" +msgid "Open the %s releases page in your browser" +msgstr "Nyissa meg a %s kiadványok oldalát a böngészőben" -msgid "Incompatible with this %s" -msgstr "Nem kompatibilis ezzel %s" +msgid "%s wiki" +msgstr "%s wiki" -msgid "Increase Instances" -msgstr "Példányszám Növelése" +msgid "Open the %s wiki in your browser" +msgstr "A %s wiki megnyitása a böngészőben" -msgid "Increase/decrease edit area" -msgstr "Szerkesztési terület növelése/csökkentése" +msgid "%s website" +msgstr "%s weboldal" -msgid "" -"indicates that some settings were changed and are not equal to the system " -"(or default) values for the current option group.\n" -"Click the UNLOCKED LOCK icon to reset all settings for current option group " -"to the system (or default) values." -msgstr "" -"azt jelzi, hogy bizonyos beállítások módosultak, és nem egyenlők az aktuális " -"opciócsoport rendszer- (vagy alapértelmezett) értékeivel.\n" -"Kattintson a NYITOTT LAKAT ikonra az aktuális opciócsoport összes " -"beállításának visszaállításához a rendszer (vagy az alapértelmezett) értékre." +msgid "Open the Slic3r website in your browser" +msgstr "Nyissa meg a Slic3r weboldalát a böngészőben" -msgid "" -"indicates that the settings are the same as the system (or default) values " -"for the current option group" -msgstr "" -"azt jelzi, hogy a beállítások megegyeznek az aktuális opciócsoport rendszer- " -"(vagy alapértelmezett) értékeivel" +msgid "Slic3r Manual" +msgstr "Slic3r kézikönyv" -msgid "" -"indicates that the settings were changed and are not equal to the last saved " -"preset for the current option group.\n" -"Click the BACK ARROW icon to reset all settings for the current option group " -"to the last saved preset." -msgstr "" -"azt jelzi, hogy a beállítások megváltoztak, és nem egyenlők az aktuális " -"opciócsoport utoljára mentett előbeállításával.\n" -"Kattintson a VISSZA NYÍL ikonra az aktuális opciócsoport összes " -"beállításának visszaállításához az utoljára mentett állapotra." +msgid "Open the Slic3r Manual in your browser" +msgstr "A Slic3r kézikönyv megnyitása a böngészőben" -msgid "Infill" -msgstr "Kitöltés" +msgid "System &Info" +msgstr "Rendszer &Infó" -msgid "infill" -msgstr "kitöltés _ nyomtatásakor" +msgid "Show system information" +msgstr "Rendszerinformációk megjelenítése" -msgid "Infill before perimeters" -msgstr "Kitöltés a kerületek előtt" +msgid "Show &Configuration Folder" +msgstr "&Konfigurációs mappa megjelenítése" -msgid "Infill extruder" -msgstr "Kitöltés extruder" +msgid "Show user configuration folder (datadir)" +msgstr "Felhasználói konfigurációs mappa megjelenítése (datadir)" -msgid "Infilling layers" -msgstr "Kitöltő rétegek" +msgid "Report an I&ssue" +msgstr "Probléma &jelentése" -msgid "Info" -msgstr "Info" +msgid "Report an issue on %s" +msgstr "Jelentsen egy problémát a %s témában" -msgid "Information" -msgstr "Információ" +msgid "&About %s" +msgstr "&Névjegy %s" -msgid "Inherits profile" -msgstr "Örököli a profilt" +msgid "Show about dialog" +msgstr "Mutasd a párbeszédpanelt" -msgid "Initial exposition time is out of printer profile bounds." -msgstr "A kezdeti expozíciós idő a nyomtató profiljának határain kívül esik." +msgid "Show the list of the keyboard shortcuts" +msgstr "A billentyűparancsok listájának megjelenítése" -msgid "Initial exposure time" -msgstr "Kezdeti expozíciós idő" +msgid "Iso" +msgstr "Iso" -msgid "Initial layer height" -msgstr "Első réteg magasság" +msgid "Iso View" +msgstr "Iso Nézet" -msgid "Inner brim only" -msgstr "Csak belső karima" +msgid "Top" +msgstr "Felső" -msgid "Input value is out of range" -msgstr "A bemeneti érték kívül esik a tartományon" +msgid "Top View" +msgstr "Felülnézet" -msgid "" -"Input value is out of range\n" -"Are you sure that %s is a correct value and that you want to continue?" -msgstr "" -"A bemeneti érték kívül esik a tartományon\n" -"Biztos benne, hogy %s a helyes érték, és folytatni szeretné?" +msgid "Bottom" +msgstr "Alsó" -msgid "Inspect / activate configuration snapshots" -msgstr "Konfigurációs pillanatfelvételek megtekintése / aktiválása" +msgid "Bottom View" +msgstr "Alulnézet" -msgid "Install" -msgstr "Telepítés" +msgid "Front" +msgstr "Első" -msgid "Instance %d" -msgstr "Példány %d" +msgid "Front View" +msgstr "Előlnézet" -msgid "Instance manipulation" -msgstr "Példány manipuláció" +msgid "Rear" +msgstr "Hátsó" -msgid "Instances" -msgstr "Példányok" +msgid "Rear View" +msgstr "Hátulnézet" -msgid "Instances to Separated Objects" -msgstr "Példányok külön objektumokká" +msgid "Left" +msgstr "Bal" -msgid "Interface loops" -msgstr "Interfész hurkok" +msgid "Left View" +msgstr "Balról nézet" -msgid "Interface pattern spacing" -msgstr "Interfész mintázat térköz" +msgid "Right" +msgstr "Jobb" -msgid "Interface shells" -msgstr "Interfész héjak" +msgid "Right View" +msgstr "Jobbról nézet" -msgid "internal error" -msgstr "belső hiba" +msgid "&New Project" +msgstr "&Új projekt" -msgid "Internal error: %1%" -msgstr "Belső hiba: %1%" +msgid "Start a new project" +msgstr "Új projekt indítása" -msgid "Internal infill" -msgstr "Belső kitöltés" +msgid "&Open Project" +msgstr "&Nyílt projekt" -msgid "Invalid data" -msgstr "Érvénytelen adat" +msgid "Open a project file" +msgstr "Projektfájl megnyitása" -msgid "Invalid file format." -msgstr "Nem megfelelő formátum." +msgid "Recent projects" +msgstr "Legutóbbi projektek" -msgid "invalid filename" -msgstr "érvénytelen fájlnév" +msgid "" +"The selected project is no longer available.\n" +"Do you want to remove it from the recent projects list?" +msgstr "" +"A kiválasztott projekt már nem elérhető.\n" +"Szeretné eltávolítani a legutóbbi projektek listájáról?" -msgid "Invalid Head penetration" -msgstr "Érvénytelen Fej benyúlás" +msgid "Error" +msgstr "Hiba" -msgid "invalid header or archive is corrupted" -msgstr "érvénytelen fejléc vagy sérült archívum" +msgid "&Save Project" +msgstr "&Projekt mentése" -msgid "" -"Invalid input format. Expected vector of dimensions in the following format: " -"\"%1%\"" -msgstr "" -"Érvénytelen bemeneti formátum. A méretek vektora a következő formátumban " -"lenne érvényes: \"%1%\"" +msgid "Save current project file" +msgstr "Aktuális projektfájl mentése" -msgid "Invalid numeric input." -msgstr "Érvénytelen numerikus bevitel." +msgid "Save Project &as" +msgstr "Projekt mentése &mint" -msgid "invalid parameter" -msgstr "érvénytelen paraméter" +msgid "Save current project file as" +msgstr "Aktuális projektfájl mentése" -msgid "Invalid pinhead diameter" -msgstr "Érvénytelen tűfej átmérő" +msgid "Import STL/OBJ/AM&F/3MF" +msgstr "STL/OBJ/AM&F/3MF importálása" -msgid "Ironing" -msgstr "Vasalás" +msgid "Load a model" +msgstr "Modell betöltése" -msgid "Ironing Type" -msgstr "Vasalás típusa" +msgid "Import STL (imperial units)" +msgstr "STL importálása (angol egységek)" -msgid "is licensed under the" -msgstr "engedélyezve van a következő szerint" +msgid "Load an model saved with imperial units" +msgstr "Angol mértékegységekkel mentett modell betöltése" -msgid "Iso" -msgstr "Izometrikus" +msgid "Import SL1 / SL1S archive" +msgstr "SL1 / SL1S archívum importálása" -msgid "Iso View" -msgstr "Izometrikus nézet" +msgid "Load an SL1 / Sl1S archive" +msgstr "SL1 / Sl1S archívum betöltése" -msgid "It can't be deleted or modified." -msgstr "Ezt nem lehet törölni vagy módosítani." +msgid "Import &Config" +msgstr "Importálás &Konfig" -msgid "" -"It may be beneficial to increase the extruder motor current during the " -"filament exchange sequence to allow for rapid ramming feed rates and to " -"overcome resistance when loading a filament with an ugly shaped tip." -msgstr "" -"Előnyös lehet az extrudermotor áramának növelése a filamentcsere során, hogy " -"elérhetővé tegye a tömörítéshez szükséges magas előtolási sebességet és az " -"ellenállás leküzdését deformált hegyű filament betöltésekor." +msgid "Load exported configuration file" +msgstr "Exportált konfigurációs fájl betöltése" -msgid "It's a last preset for this physical printer." -msgstr "Ez az utolsó előbeállítás ehhez a fizikai nyomtatóhoz." +msgid "Import Prusa Config" +msgstr "Prusa konfiguráció importálása" -msgid "It's impossible to print multi-part object(s) with SLA technology." -msgstr "" -"SLA technológiával nem lehetséges több részből álló objektum(ok) nyomtatása." +msgid "Load configuration file exported from PrusaSlicer" +msgstr "PrusaSlicerből exportált konfigurációs fájl betöltése" -msgid "It's not possible to delete the last related preset for the printer." -msgstr "Nem lehet törölni a nyomtató utolsó kapcsolódó előbeállítását." +msgid "Import Config from &project" +msgstr "Konfiguráció importálása a &projectből" -msgid "Jerk limits" -msgstr "Rántás korlátok" +msgid "Load configuration from project file" +msgstr "Konfiguráció betöltése a projektfájlból" -msgid "Jitter" -msgstr "Jitter" +msgid "Import Config &Bundle" +msgstr "Konfigurációs csomag &importálása" -msgid "Jump to height" -msgstr "Ugrás a magassághoz" +msgid "Load presets from a bundle" +msgstr "Előbeállítások betöltése egy csomagból" -msgid "" -"Jump to height %s\n" -"or Set ruler mode" -msgstr "" -"Ugrás a magasságra %s\n" -"vagy Vonalzó mód beállítása" +msgid "Import Prusa Config Bundle" +msgstr "Prusa Config csomag importálása" -msgid "" -"Jump to height %s\n" -"Set ruler mode\n" -"or Set extruder sequence for the entire print" -msgstr "" -"Ugrás a magasságra %s\n" -"Vonalzó mód beállítása\n" -"vagy Extruder sorrend beállítása a teljes nyomtatáshoz" +msgid "Load presets from a PrusaSlicer bundle" +msgstr "Előbeállítások betöltése egy PrusaSlicer csomagból" -msgid "Jump to move" -msgstr "Ugrás a mozgáshoz" +msgid "&Import" +msgstr "&Importálás" -msgid "Just switch to \"%1%\" preset" -msgstr "Csak váltson a(z) \"%1%\" előbeállításra" +msgid "Export &G-code" +msgstr "G-kód &exportálás" -msgid "Keep" -msgstr "Megtartás" +msgid "Export current plate as G-code" +msgstr "Aktuális tálca exportálása G-kódként" -msgid "Keep fan always on" -msgstr "Tartsa mindig bekapcsolva a ventilátort" +msgid "S&end G-code" +msgstr "G&-kód küldése" -msgid "Keep lower part" -msgstr "Alsó rész megtartása" +msgid "Send to print current plate as G-code" +msgstr "Küldés az aktuális tálca nyomtatásához G-kódként" -msgid "Keep min" -msgstr "Min. megtartása" +msgid "Export G-code to SD card / Flash drive" +msgstr "G-kód exportálása SD-kártyára / flash meghajtóra" -msgid "Keep the selected settings." -msgstr "A kiválasztott beállítások megtartása." +msgid "Export current plate as G-code to SD card / Flash drive" +msgstr "Az aktuális tálca exportálása G-kódként SD-kártyára / flash meghajtóra" -msgid "Keep upper part" -msgstr "Felső rész megtartása" +msgid "Export plate as &STL" +msgstr "Tálca exportálása &STL-ként" -msgid "Keyboard shortcuts" -msgstr "Gyorsbillentyűk" +msgid "Export current plate as STL" +msgstr "Aktuális tálca exportálása STL-ként" -msgid "Keyboard Shortcuts" -msgstr "Gyorsbillentyűk" +msgid "Export plate as STL &including supports" +msgstr "A tálca exportálása STL-ként &és a tartókkal együtt" -msgid "kg" -msgstr "kg" +msgid "Export current plate as STL including supports" +msgstr "Az aktuális tálca exportálása STL-ként, beleértve a támasztékokat is" -msgid "Label objects" -msgstr "Objektumok címkézése" +msgid "Export plate as &AMF" +msgstr "Lemez exportálása &AMF-ként" -msgid "Landscape" -msgstr "Tájkép" +msgid "Export current plate as AMF" +msgstr "Aktuális lemez exportálása AMF-ként" -msgid "Language" -msgstr "Nyelv" +msgid "Export &toolpaths as OBJ" +msgstr "Szerszámpályák &exportálása OBJ-ként" -msgid "Language selection" -msgstr "Nyelv kiválasztása" +msgid "Export toolpaths as OBJ" +msgstr "Szerszámpályák exportálása OBJ-ként" -msgid "Last instance of an object cannot be deleted." -msgstr "Egy objektum utolsó példánya nem törölhető." +msgid "Export &Config" +msgstr "Konfiguráció &exportálása" -msgid "Layer" -msgstr "Réteg" +msgid "Export current configuration to file" +msgstr "Aktuális konfiguráció exportálása fájlba" -msgid "Layer height" -msgstr "Réteg magasság" +msgid "Export Config &Bundle" +msgstr "Konfigurációs csomag &exportálása" + +msgid "Export all presets to file" +msgstr "Az összes előbeállítás exportálása fájlba" + +msgid "Export Config Bundle With Physical Printers" +msgstr "Konfigurációs csomag exportálása fizikai nyomtatókkal" + +msgid "Export all presets including physical printers to file" +msgstr "" +"Az összes előbeállítás exportálása, beleértve a fizikai nyomtatókat is, " +"fájlba" + +msgid "Export to &Prusa Config" +msgstr "Exportálás &Prusa konfigba" msgid "" -"Layer height is not valid.\n" -"\n" -"The layer height will be reset to 0.01." +"Export current configuration to file, with only settings compatible with " +"PrusaSlicer" msgstr "" -"A réteg magassága nem érvényes.\n" -"\n" -"A réteg magassága 0,01-re áll vissza." +"Az aktuális konfiguráció exportálása fájlba, csak a PrusaSlicerrel " +"kompatibilis beállításokat tartalmazva" -msgid "Layer height limits" -msgstr "Rétegmagasság korlátok" +msgid "&Export" +msgstr "&Exportálás" -msgid "Layer range Settings to modify" -msgstr "Módosítható rétegtartomány beálltások" +msgid "Ejec&t SD card / Flash drive" +msgstr "SD-kártya / pendrive kivétel&e" -msgid "layers" -msgstr "réteg(nél)" +msgid "Eject SD card / Flash drive after the G-code was exported to it." +msgstr "Adja ki az SD-kártyát / pendrive-ot, miután a G-kódot ráexportálta." -msgid "Layers" -msgstr "Rétegek" +msgid "Quick Slice" +msgstr "Gyors szeletelés" -msgid "Layers and perimeters" -msgstr "Rétegek és kerületek" +msgid "Slice a file into a G-code" +msgstr "Egy fájl G-kóddá szeletelése" -msgid "Leave \"%1%\" enabled" -msgstr "Hagyja engedélyezve a \"%1%\"-ot" +msgid "Quick Slice and Save As" +msgstr "Gyors szeletelés és mentés" -msgid "Left" -msgstr "Bal" +msgid "Slice a file into a G-code, save as" +msgstr "Szeleteljünk egy fájlt G-kóddá, mentsük másként" -msgid "Left click" -msgstr "Bal klikk" +msgid "Repeat Last Quick Slice" +msgstr "Utolsó gyors szeletelés megismétlése" -msgid "Left mouse button" -msgstr "Bal egérgomb" +msgid "Repeat last quick slice" +msgstr "Ismételje meg az utolsó gyors szeletelést" -msgid "Left mouse button:" -msgstr "Bal egérgomb:" +msgid "(Re)Slice No&w" +msgstr "(Újra)Szeletelj mos&t" -msgid "Left Preset Value" -msgstr "Bal Előbeállítás Értéke" +msgid "Start new slicing process" +msgstr "Új szeletelési folyamat indítása" -msgid "Left View" -msgstr "Balnézet" +msgid "&Repair STL file" +msgstr "&STL fájl javítása" -msgid "Legend/Estimated printing time" -msgstr "Magyarázat/becsült nyomtatási idő" +msgid "Automatically repair an STL file" +msgstr "STL fájl automatikus javítása" -msgid "Length" -msgstr "Hossz" +msgid "&G-code preview" +msgstr "&G-kód előnézet" -msgid "Length of the cooling tube to limit space for cooling moves inside it." -msgstr "" -"A hűtőcső hossza, ami limitálja a hűtéshez használható helyet annak a " -"belsejében." +msgid "&Quit" +msgstr "&Kilépés" -msgid "Length of the infill anchor" -msgstr "A kitöltőhorgony hossza" +msgid "Quit %s" +msgstr "Kilépés %s" -msgid "" -"License agreements of all following programs (libraries) are part of " -"application license agreement" -msgstr "" -"A következő programok (könyvtárak) licencszerződései az alkalmazás " -"licencszerződésének részét képezik" +msgid "&Select all" +msgstr "&Minden kijelölése" -msgid "" -"Lift the object above the bed when it is partially below. Enabled by " -"default, use --no-ensure-on-bed to disable." -msgstr "" -"Emelje az objektumot a tárgyasztal fölé, amikor az részben alatta van. " -"Alapértelmezés szerint engedélyezve van, kikapcsolásához használja a --no-" -"ensure-on-bed opciót." +msgid "Selects all objects" +msgstr "Minden objektum kiválasztása" -msgid "Lift Z" -msgstr "Z emelés" +msgid "D&eselect all" +msgstr "T&örölje az összes jelölést" -msgid "Lightning" -msgstr "Villám" +msgid "Deselects all objects" +msgstr "Minden objektum kijelölésének megszüntetése" -msgid "Limited" -msgstr "Korlátozott" +msgid "&Delete selected" +msgstr "&Kiválasztott törlése" -msgid "Line" -msgstr "Vonal" +msgid "Deletes the current selection" +msgstr "Törli az aktuális kijelölést" -msgid "Load" -msgstr "Betöltés" +msgid "Delete &all" +msgstr "Minden &törlése" -msgid "Load a model" -msgstr "Modell betöltése" +msgid "Deletes all objects" +msgstr "Minden objektum törlése" -msgid "Load an model saved with imperial units" -msgstr "Angolszász mértékegységekkel mentett modell importálása" +msgid "&Undo" +msgstr "&Visszavonás" -msgid "Load an SL1 / Sl1S archive" -msgstr "SL1 / Sl1S archív betöltése" +msgid "&Redo" +msgstr "&Mégis" -msgid "" -"Load and store settings at the given directory. This is useful for " -"maintaining different profiles or including configurations from a network " -"storage." -msgstr "" -"A beállítások betöltése és tárolása a megadott könyvtárban. Ez hasznos a " -"különböző profilok karbantartásához vagy a hálózaton tárolt konfigurációk " -"beviteléhez." +msgid "&Copy" +msgstr "&Másolás" -msgid "Load config file" -msgstr "Konfigurációs fájl betöltése" +msgid "Copy selection to clipboard" +msgstr "Kijelöltek másolása a vágólapra" -msgid "Load Config from ini/amf/3mf/gcode and merge" -msgstr "" -"Konfiguráció betöltése ini/amf/3mf/gcode fájlból, és hozzáadás a meglévőhöz" +msgid "&Paste" +msgstr "&Beillesztés" -msgid "Load configuration from project file" -msgstr "Konfiguráció betöltése projekt fájlból" +msgid "Paste clipboard" +msgstr "Beillesztés vágólapra" -msgid "" -"Load configuration from the specified file. It can be used more than once to " -"load options from multiple files." -msgstr "" -"Konfiguráció betöltése a megadott fájlból. Többször is használható " -"beállítások több fájlból történő betöltéséhez." +msgid "Re&load from disk" +msgstr "Új&ratöltés lemezről" -msgid "Load exported configuration file" -msgstr "Korábban exportált konfigurációs fájl betöltése" +msgid "Reload the plater from disk" +msgstr "A tálca újratöltése a lemezről" -msgid "Load File" -msgstr "Fájl Betöltése" +msgid "Searc&h" +msgstr "Keresé&s" -msgid "Load Files" -msgstr "Fájlok Betöltése" +msgid "Search in settings" +msgstr "Keresés a beállításokban" -msgid "Load Modifier" -msgstr "Módosító Betöltése" +msgid "3D &Plater Tab" +msgstr "3D &Tálca lap" -msgid "Load Part" -msgstr "Alkatrész Betöltése" +msgid "Show the editor of the input models" +msgstr "A bemeneti modellek szerkesztőjének megjelenítése" -msgid "Load presets from a bundle" -msgstr "Előbeállítások betöltése konfigurációs csomagból" +msgid "Layer previe&w Tab" +msgstr "Réteg előnéze&t lap" -msgid "Load Project" -msgstr "Projekt Betöltése" +msgid "Show the layers from the slicing process" +msgstr "A szeletelésből származó rétegek megjelenítése" -msgid "Load shape from STL..." -msgstr "Alakzat betöltése STL-ből..." +msgid "GCode Pre&view Tab" +msgstr "G-kód elő&nézeti lap" -msgid "Load..." -msgstr "Betöltés..." +msgid "Show the preview of the gcode output" +msgstr "A G-kód kimenet előnézetének megjelenítése" -msgid "loaded" -msgstr "betöltve_" +msgid "P&rint Settings Tab" +msgstr "N&yomtatási beállítások lap" -msgid "Loading" -msgstr "Betöltés" +msgid "Show the print settings" +msgstr "A nyomtatási beállítások megjelenítése" -msgid "Loading a configuration snapshot" -msgstr "Konfigurációs pillanatkép betöltése" +msgid "&Filament Settings Tab" +msgstr "&Nyomtatószál beállítások lap" -msgid "Loading a new project while the current project is modified." -msgstr "Új projekt betöltése az jelenlegi projekt módosítása közben." +msgid "Show the filament settings" +msgstr "Az izzószál beállítások megjelenítése" -msgid "Loading configuration" -msgstr "Konfiguráció betöltése" +msgid "Print&er Settings Tab" +msgstr "Nyomtat&ási beállítások lap" -msgid "Loading file" -msgstr "Fájl betöltése" +msgid "Show the printer settings" +msgstr "A nyomtató beállításainak megjelenítése" -msgid "Loading of a configuration bundle" -msgstr "Konfigurációs csomag betöltése" +msgid "Print &Host Upload Queue" +msgstr "Nyomtatás Gazdagép feltöltési várólista" -msgid "Loading of a configuration file" -msgstr "Konfigurációs fájl betöltése" +msgid "Display the Print Host Upload Queue window" +msgstr "Nyomtató gazdagép feltöltési várólista ablak" -msgid "Loading of a mode view" -msgstr "Mód nézet betöltése" +msgid "Show &labels" +msgstr "Címkék &megjelenítése" -msgid "Loading of current presets" -msgstr "Az aktuális előbeállítások betöltése" +msgid "Show object/instance labels in 3D scene" +msgstr "Objektum/példánycímkék megjelenítése a 3D jelenetben" -msgid "Loading repaired model" -msgstr "Javított modell betöltése" +msgid "&Collapse sidebar" +msgstr "&Oldalsáv bezárása" -msgid "Loading speed" -msgstr "Betöltési sebesség" +msgid "Collapse sidebar" +msgstr "Oldalsáv összecsukása" -msgid "Loading speed at the start" -msgstr "Betöltési sebesség kezdéskor" +msgid "Introduction" +msgstr "Bevezetés" -msgid "Local coordinates" -msgstr "Helyi koordináták" +msgid "How to use this menu and calibrations." +msgstr "A menü és a kalibrációk használata." -msgid "Lock supports under new islands" -msgstr "A támasztékok lezárása az új szigetek alatt" +msgid "Bed/Extruder leveling" +msgstr "Ágy/extruder szintezése" -msgid "LOCKED LOCK" -msgstr "ZÁRT LAKAT" +msgid "Create a test print to help you to level your printer bed." +msgstr "" +"Készítsen egy próbanyomatot, hogy segítsen kiegyenlíteni a nyomtatóágyat." + +msgid "Filament Flow calibration" +msgstr "Száláramlás kalibrálása" msgid "" -"LOCKED LOCK icon indicates that the settings are the same as the system (or " -"default) values for the current option group" +"Create a test print to help you to set your filament extrusion multiplier." msgstr "" -"ZÁRT LAKAT ikon azt jelzi, hogy a beállítások megegyeznek az aktuális " -"opciócsoport rendszer- (vagy alapértelmezett) értékeivel" +"Hozzon létre egy tesztnyomatot, hogy segítsen beállítani a szál extrudálási " +"szorzóját." -msgid "" -"LOCKED LOCK icon indicates that the value is the same as the system (or " -"default) value." +msgid "Filament temperature calibration" +msgstr "Szálhőmérséklet kalibrálás" + +msgid "Create a test print to help you to set your filament temperature." msgstr "" -"ZÁRT LAKAT ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy " -"alapértelmezett) értékével." +"Hozzon létre egy tesztnyomtatást, hogy segítsen beállítani a " +"szálhőmérsékletet." -msgid "Logging level" -msgstr "Naplózási szint" +msgid "Extruder retraction calibration" +msgstr "Extruder visszahúzás kalibrálása" -msgid "Loops (minimum)" -msgstr "Hurkok (minimum)" +msgid "Create a test print to help you to set your retraction length." +msgstr "" +"Készítsen egy próbanyomatot, amely segít a behúzási hossz beállításában." -msgid "Lowest Z height" -msgstr "Legalacsonyabb Z magasság" +msgid "Bridge flow calibration" +msgstr "Híd áramlási kalibráció" -msgid "Machine limits" -msgstr "Gépi limitek" +msgid "Create a test print to help you to set your bridge flow ratio." +msgstr "" +"Készítsen egy tesztnyomatot, amely segít a hídáramlási arány beállításában." + +msgid "Ironing pattern calibration" +msgstr "Vasalási minta kalibrálása" msgid "" -"Make sure the object is printable. This is usually caused by negligibly " -"small extrusions or by a faulty model. Try to repair the model or change its " -"orientation on the bed." +"Create a test print to help you to set your over-bridge flow ratio and " +"ironing pattern." msgstr "" -"Győződjön meg róla, hogy az objektum nyomtatható. Ezt általában " -"elhanyagolhatóan kis extrudálások vagy hibás modell okozza. Próbálja meg " -"kijavítani a modellt, vagy változtassa meg az tárgyasztalon való tájolását." +"Készítsen próbanyomatot, hogy segítsen beállítani a híd feletti áramlási " +"arányt és a vasalási mintát." -msgid "Manual editing" -msgstr "Kézi szerkesztés" +msgid "Print a calibration cube, for various calibration goals." +msgstr "Kalibrációs kocka nyomtatása, különböző kalibrációs célokhoz." -msgid "Masked SLA file exported to %1%" -msgstr "Maszkolt SLA fájl exportálva az alábbi helyre: %1%" +msgid "FreeCad python script" +msgstr "FreeCad python szkript" -msgid "Match single line" -msgstr "Egysoros egyeztetés" +msgid "Create an object by writing little easy script." +msgstr "Hozzon létre egy objektumot egy kis egyszerű szkript megírásával." -msgid "Mate&rial Settings Tab" -msgstr "Anyagbeállítások Lap" +msgid "Script help page" +msgstr "Szkript súgó oldal" -msgid "Material" -msgstr "Anyag" +msgid "How to use the FreeCad python script window." +msgstr "A FreeCad python szkript ablak használata." -msgid "Material printing profile" -msgstr "Anyag nyomtatási profil" +msgid "&File" +msgstr "&Fájl" -msgid "Material Settings" -msgstr "Alapanyag Beállítások" +msgid "&Edit" +msgstr "&Szerkeszt" -msgid "Material Settings Tab" -msgstr "Alapanyag Beállítások Fül" +msgid "&Window" +msgstr "&Ablak" -msgid "Max" -msgstr "Max" +msgid "&View" +msgstr "&Nézet" -msgid "Max bridge length" -msgstr "Híd max. hossza" +msgid "C&alibration" +msgstr "K&alibrálás" -msgid "Max bridges on a pillar" -msgstr "Max hidak egy pilléren" +msgid "&Generate" +msgstr "&Generál" -msgid "Max merge distance" -msgstr "Maximális összeolvadási távolság" +msgid "&Help" +msgstr "&Súgó" -msgid "Max pillar linking distance" -msgstr "Maximális oszlop áthidalási távolság" +msgid "&Open G-code" +msgstr "&G-kód megnyitása" -msgid "Max print height" -msgstr "Max nyomtatási magasság" +msgid "O&pen %s" +msgstr "M&egnyitás %s" -msgid "Max print speed" -msgstr "Max nyomtatási sebesség" +msgid "E&xport" +msgstr "E&xportálás" -msgid "Max volumetric slope negative" -msgstr "Maximális térfogati meredekség negatív" +msgid "S&end to print" +msgstr "N&yomtatásra küldés" -msgid "Max volumetric slope positive" -msgstr "Maximális térfogati meredekség pozitív" +msgid "Mate&rial Settings Tab" +msgstr "Anyag&beállítások lap" -msgid "Max volumetric speed" -msgstr "Max Térfogati sebesség" +msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" +msgstr "Válassza ki a szeletelendő fájlt (STL/OBJ/AMF/3MF/PRUSA):" -msgid "Maximal bridging distance" -msgstr "Maximális áthidalási távolság" +msgid "No previously sliced file." +msgstr "Nincs korábban szeletelt fájl." -msgid "Maximal distance between supports on sparse infill sections. " -msgstr "A támaszok közötti maximális távolság a ritkás kitöltésű részeken. " +msgid "Previously sliced file (" +msgstr "Korábban szeletelt fájl (" -msgid "Maximum acceleration E" -msgstr "Maximum gyorsulás E" +msgid ") not found." +msgstr ") nem található." -msgid "Maximum acceleration for travel moves" -msgstr "Maximum gyorsulás utazási mozgásokhoz" +msgid "File Not Found" +msgstr "Fájl nem található" -msgid "Maximum acceleration of the E axis" -msgstr "Maximum gyorsulás az E tengelyen" +msgid "Save %s file as:" +msgstr "%s fájl mentése mint:" -msgid "Maximum acceleration of the X axis" -msgstr "Maximum gyorsulás az X tengelyen" +msgid "SVG" +msgstr "SVG" -msgid "Maximum acceleration of the Y axis" -msgstr "Maximum gyorsulás az Y tengelyen" +msgid "G-code" +msgstr "G-kód" -msgid "Maximum acceleration of the Z axis" -msgstr "Maximum gyorsulás az Z tengelyen" +msgid "Save zip file as:" +msgstr "Zip-fájl mentése:" -msgid "Maximum acceleration when extruding" -msgstr "Maximum gyorsulás extrudáláskor" +msgid "Slicing" +msgstr "Szeletelés" -msgid "" -"Maximum acceleration when extruding (M204 P)\n" -"\n" -"Marlin (legacy) firmware flavor will use this also as travel acceleration " -"(M204 T)." -msgstr "" -"Maximum gyorsulás extrudáláskor (M204 P)\n" -"\n" -"A Marlin (régi) firmware ezt utazási gyorsulásként is használja (M204 T)." +msgid "Processing %s" +msgstr "Feldolgozás %s" -msgid "Maximum acceleration when retracting" -msgstr "Maximum gyorsulás visszahúzáskor" +msgid "%1% was successfully sliced." +msgstr "%1% sikeresen szeletelve." -msgid "Maximum acceleration when retracting (M204 R)" -msgstr "Maximum gyorsulás visszahúzáskor (M204 R)" +msgid "Slicing Done!" +msgstr "Szeletelés kész!" -msgid "Maximum acceleration X" -msgstr "Maximum gyorsulás X" +msgid "Select the STL file to repair:" +msgstr "Válassza ki a javítandó STL fájlt:" -msgid "Maximum acceleration Y" -msgstr "Maximum gyorsulás Y" +msgid "Save OBJ file (less prone to coordinate errors than STL) as:" +msgstr "" +"Az OBJ fájl mentése (kevésbé hajlamos a koordinátahibákra, mint az STL):" -msgid "Maximum acceleration Z" -msgstr "Maximum gyorsulás Z" +msgid "Your file was repaired." +msgstr "A fájl javítva lett." -msgid "Maximum accelerations" -msgstr "Maximum gyorsulások" +msgid "Repair" +msgstr "Javítás" -msgid "" -"Maximum deviation of exported G-code paths from their full resolution " -"counterparts. Very high resolution G-code requires huge amount of RAM to " -"slice and preview, also a 3D printer may stutter not being able to process a " -"high resolution G-code in a timely manner. On the other hand, a low " -"resolution G-code will produce a low poly effect and because the G-code " -"reduction is performed at each layer independently, visible artifacts may be " -"produced." -msgstr "" -"Az exportált szerszámpályák maximális eltérése a teljes felbontású " -"megfelelőiktől a G-kódban. A nagyon nagy felbontású G-kód nagy mennyiségű " -"RAM-ot igényel a szeleteléshez és az előnézethez, továbbá előfordulhat, hogy " -"a 3D nyomtató nem tudja időben feldolgozni a nagy felbontású G-kódot. " -"Másrészt az alacsony felbontású G-kód \"low poly\" effektust okoz, és mivel " -"a G-kód egyszerűsítése minden egyes rétegen egymástól függetlenül történik, " -"látható műtermékek keletkezhetnek." +msgid "Save configuration as:" +msgstr "Konfiguráció mentése mint:" -msgid "Maximum exposure time" -msgstr "Maximum expozíciós idő" +msgid "Select configuration to load:" +msgstr "Válassza ki a betöltendő konfigurációt:" -msgid "Maximum feedrate E" -msgstr "Maximum előtolási sebesség E" +msgid "Save presets bundle as:" +msgstr "Előbeállítások mentése:" -msgid "Maximum feedrate of the E axis" -msgstr "Maximum előtolási sebesség az E tengelyen" +msgid "%d presets successfully imported." +msgstr "%d előbeállítás sikeresen importálva." -msgid "Maximum feedrate of the X axis" -msgstr "Maximum előtolási sebesség az X tengelyen" +msgid "3Dconnexion settings" +msgstr "3Dconnexion beállítások" -msgid "Maximum feedrate of the Y axis" -msgstr "Maximum előtolási sebesség az Y tengelyen" +msgid "Device:" +msgstr "Eszköz:" -msgid "Maximum feedrate of the Z axis" -msgstr "Maximum előtolási sebesség az Z tengelyen" +msgid "Speed:" +msgstr "Sebesség:" -msgid "Maximum feedrate X" -msgstr "Maximum előtolási sebesség X" +msgid "Translation" +msgstr "Fordítás" -msgid "Maximum feedrate Y" -msgstr "Maximum előtolási sebesség Y" +msgid "Zoom" +msgstr "Nagyítás" -msgid "Maximum feedrate Z" -msgstr "Maximum előtolási sebesség Z" +msgid "Deadzone:" +msgstr "Holtzóna:" -msgid "Maximum feedrates" -msgstr "Maximum előtolások" +msgid "Options:" +msgstr "Opciók:" -msgid "Maximum initial exposure time" -msgstr "Maximum kezdeti expozíciós idő" +msgid "Swap Y/Z axes" +msgstr "Y/Z tengelyek cseréje" -msgid "Maximum jerk E" -msgstr "Maximum rántás E" +msgid "%s error" +msgstr "%s hiba" -msgid "Maximum jerk of the E axis" -msgstr "Maximum rántás az E tengelyen" +msgid "%s has encountered an error" +msgstr "%s hibát észlelt" -msgid "Maximum jerk of the X axis" -msgstr "Maximum rántás az X tengelyen" +msgid "%s information" +msgstr "%s információ" -msgid "Maximum jerk of the Y axis" -msgstr "Maximum rántás az Y tengelyen" - -msgid "Maximum jerk of the Z axis" -msgstr "Maximum rántás az Z tengelyen" +msgid "3D Mouse disconnected." +msgstr "3D egér lecsatlakoztatva." -msgid "Maximum jerk X" -msgstr "Maximum rántás X" +msgid "Configuration update is available." +msgstr "A konfiguráció frissítése elérhető." -msgid "Maximum jerk Y" -msgstr "Maximum rántás Y" +msgid "See more." +msgstr "Lásd még." -msgid "Maximum jerk Z" -msgstr "Maximum rántás Z" +msgid "New version is available." +msgstr "Új verzió elérhető." -msgid "Maximum length of the infill anchor" -msgstr "A kitöltőhorgony maximális hossza" +msgid "See Releases page." +msgstr "Lásd a Kiadványok oldalt." msgid "" -"Maximum number of bridges that can be placed on a pillar. Bridges hold " -"support point pinheads and connect to pillars as small branches." +"You have just added a G-code for color change, but its value is empty.\n" +"To export the G-code correctly, check the \"Color Change G-code\" in " +"\"Printer Settings > Custom G-code\"" msgstr "" -"Az egy pilléren elhelyezhető hidak maximális száma. A hidak tartják a " -"támasztópont tűfejeit, és kis ágakként csatlakoznak a pillérekhez." +"Most adott hozzá egy G-kódot a színváltáshoz, de az értéke üres.\n" +"A G-kód helyes exportálásához ellenőrizze a \"Színváltás G-kód\" opciót a " +"\"Nyomtatóbeállítások > Egyéni G-kód\" menüpontban." -msgid "Maximum width of a segmented region" -msgstr "Szegmentált régió maximális szélessége" +msgid "Export G-Code." +msgstr "G-kód exportálása." -msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "" -"A szegmentált régió maximális szélessége. A nulla kikapcsolja ezt a funkciót." +msgid "Open Folder." +msgstr "Mappa megnyitása." -msgid "Merge" -msgstr "Összevonás" +msgid "Eject drive" +msgstr "A meghajtó kiadása" -msgid "Merge all parts to the one single object" -msgstr "Az összes alkatrész összevonása egyetlen objektummá" +msgid "ERROR:" +msgstr "HIBA:" -msgid "Merged" -msgstr "Összevonva" +msgid "WARNING:" +msgstr "FIGYELEM:" -msgid "Merging slices and calculating statistics" -msgstr "Szeletek összefűzése és statisztika kiszámítása" +msgid "Slicing finished." +msgstr "A szeletelés befejeződött." -msgid "Mesh repair failed." -msgstr "Háló javítás nem sikerült." +msgid "Exporting finished." +msgstr "Az exportálás befejeződött." -msgid "" -"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." -msgstr "" -"Az üregesítendő térháló nem alkalmas az üregesítésre (nem foglal magába " -"térfogatot)." +msgid "Instances" +msgstr "Példák" -msgid "Message for pause print on current layer (%1% mm)." -msgstr "Üzenet a nyomtatás szüneteltetésekor az aktuális rétegen (%1% mm)." +msgid "Instance %d" +msgstr "Példák %d" -msgid "Min" -msgstr "Min" +msgid "Layers" +msgstr "Rétegek" -msgid "Min print speed" -msgstr "Min nyomtatási sebesség" +msgid "Range" +msgstr "Tartomány" -msgid "Minimal distance of the support points" -msgstr "A támasztási pontok minimális távolsága" +msgid "Should we open this hyperlink in your default browser?" +msgstr "" +"Meg kellene nyitnunk ezt a hiperhivatkozást az alapértelmezett böngészőben?" -msgid "Minimal filament extrusion length" -msgstr "Minimálisan elhasznált Filament" +msgid ": Open hyperlink" +msgstr ": Hiperhivatkozás megnyitása" -msgid "Minimal points distance" -msgstr "Pontok minimális távolsága" +msgid "Suppress to open hyperlink in browser" +msgstr "Hiperhivatkozás megnyitása a böngészőben" -msgid "Minimal purge on wipe tower" -msgstr "Minimális öblítés a törlőtornyon" +msgid "%s will remember your choice." +msgstr "%s emlékezni fog a választására." -msgid "Minimize application" -msgstr "Alkalmazás minimalizálása" +msgid "You will not be asked about it again on label hovering." +msgstr "A címke lebegtetésénél nem kérdezik meg újra." -msgid "Minimum bottom shell thickness" -msgstr "Minimális alsó héjvastagság" +msgid "" +"Visit \"Preferences\" and check \"%1%\"\n" +"to changes your choice." +msgstr "" +"Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" " +"lehetőséget.\n" +"a választás megváltoztatásához." -msgid "Minimum bottom shell thickness is %1% mm." -msgstr "Az alsó héj minimális vastagsága %1% mm." +msgid "%s: Don't ask me again" +msgstr "%s: Ne kérdezd újra" -msgid "Minimum exposure time" -msgstr "Minimális expozíciós idő" +msgid "" +"%s requires OpenGL 2.0 capable graphics driver to run correctly, \n" +"while OpenGL version %s, render %s, vendor %s was detected." +msgstr "" +"A %s helyes futtatásához OpenGL 2.0-képes grafikus vezérlőre van szükség, \n" +"míg az OpenGL verzió %s, render %s, vendor %s érzékelésre került." -msgid "Minimum feedrate when extruding" -msgstr "Minimum előtolási sebesség extrudáláskor" +msgid "You may need to update your graphics card driver." +msgstr "Lehet, hogy frissítenie kell a grafikus kártya illesztőprogramját." -msgid "Minimum feedrate when extruding (M205 S)" -msgstr "Minimum előtolási sebesség extrudáláskor (M205 S)" +msgid "" +"As a workaround, you may run %s with a software rendered 3D graphics by " +"running %s.exe with the --sw-renderer parameter." +msgstr "" +"Megoldásként futtathatja a %s programot szoftveresen renderelt 3D " +"grafikával, ha a %s.exe programot a --sw-renderer paraméterrel futtatja." -msgid "Minimum feedrates" -msgstr "Minimum előtolások" +msgid "Unsupported OpenGL version" +msgstr "Nem támogatott OpenGL verzió" -msgid "Minimum initial exposure time" -msgstr "Minimális kezdeti expozíciós idő" +msgid "" +"Unable to load the following shaders:\n" +"%s" +msgstr "" +"Nem sikerült betölteni a következő árnyékolókat:\n" +"%s" -msgid "Minimum shell thickness" -msgstr "Minimum héjvastagság" +msgid "Error loading shaders" +msgstr "Hiba a shaderek betöltésében" -msgid "Minimum thickness of a top / bottom shell" -msgstr "A felső/alsó héj minimális vastagsága" +msgid "Delete this preset from this printer device" +msgstr "Törli az előbeállítást erről a nyomtatóeszközről" -msgid "Minimum top shell thickness" -msgstr "Minimális felső héj vastagság" +msgid "This printer will be shown in the presets list as" +msgstr "" +"Ez a nyomtató az előbeállítások listájában a következőképpen jelenik meg" -msgid "Minimum top shell thickness is %1% mm." -msgstr "A felső héj minimális vastagsága %1% mm." +msgid "Type here the name of your printer device" +msgstr "Írja be ide a nyomtatóeszköz nevét" -msgid "Minimum travel after retraction" -msgstr "Minimális út visszahúzás után" +msgid "Descriptive name for the printer" +msgstr "A nyomtató leíró neve" -msgid "Minimum travel feedrate" -msgstr "Minimum utazási előtolás" +msgid "Add preset for this printer device" +msgstr "Előbeállítás hozzáadása ehhez a nyomtatóeszközhöz" -msgid "Minimum travel feedrate (M205 T)" -msgstr "Minimum utazási előtolás (M205 T)" +msgid "Print Host upload" +msgstr "Nyomtatás Gazdagép feltöltés" -msgid "Minimum wall thickness of a hollowed model." -msgstr "Az üreges modell minimális falvastagsága." +msgid "Test" +msgstr "Teszt" -msgid "Mirror horizontally" -msgstr "Tükrözés vízszintesen" +msgid "Could not get a valid Printer Host reference" +msgstr "Nem sikerült érvényes nyomtatógazda-hivatkozást szerezni" -msgid "Mirror Object" -msgstr "Objektum Tükrözése" +msgid "Success!" +msgstr "Siker!" -msgid "Mirror vertically" -msgstr "Tükrözés függőlegesen" +msgid "Refresh Printers" +msgstr "Nyomtatók frissítése" -msgid "Mismatched type of print host: %s" -msgstr "A nyomtató gazdagép típusa nem egyezik meg: %s" +msgid "" +"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" +"signed certificate." +msgstr "" +"A HTTPS CA fájl opcionális. Csak akkor van rá szükség, ha a HTTPS-t saját " +"aláírású tanúsítvánnyal használja." -msgid "Mixed" -msgstr "Vegyes" +msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" +msgstr "Tanúsítványfájlok (*.crt, *.pem)|*.crt;*.pem|Minden fájl|*.*" -msgid "ml" -msgstr "ml" +msgid "Open CA certificate file" +msgstr "CA tanúsítványfájl megnyitása" -msgid "mm" -msgstr "mm" +msgid "HTTPS CA File" +msgstr "HTTPS CA fájl" -msgid "mm (zero to disable)" -msgstr "mm (nulla a letiltáshoz)" +msgid "" +"On this system, %s uses HTTPS certificates from the system Certificate Store " +"or Keychain." +msgstr "" +"Ezen a rendszeren a %s HTTPS-tanúsítványokat használ a rendszer " +"tanúsítványtárolójából vagy kulcstárából." -msgid "mm or %" -msgstr "mm vagy %" +msgid "" +"To use a custom CA file, please import your CA file into Certificate Store / " +"Keychain." +msgstr "" +"Egyéni hitelesítésszolgáltatói fájl használatához kérjük, importálja a " +"hitelesítésszolgáltatói fájlt a tanúsítványtárolóba / kulcstárba." -msgid "mm or % (zero to disable)" -msgstr "mm vagy % (nulla esetén letiltva)" +msgid "The supplied name is empty. It can't be saved." +msgstr "A megadott név üres. Nem lehet elmenteni." -msgid "mm/s" -msgstr "mm/s" +msgid "You should change the name of your printer device." +msgstr "Meg kell változtatnia a nyomtatóeszköz nevét." -msgid "mm/s or %" -msgstr "mm/s vagy %" +msgid "Printer with name \"%1%\" already exists." +msgstr "A \"%1%\" nevű nyomtató már létezik." -msgid "mm/s²" -msgstr "mm/s²" +msgid "Replace?" +msgstr "Csere?" -msgid "mm²" -msgstr "mm²" +msgid "" +"Following printer preset(s) is duplicated:%1%The above preset for printer " +"\"%2%\" will be used just once." +msgstr "" +"A következő nyomtató előbeállítás(ok) duplikálódnak:%1%A fenti előbeállítás " +"a \"%2%\" nyomtatóhoz csak egyszer lesz használva." -msgid "mm³" -msgstr "mm³" +msgid "It's not possible to delete the last related preset for the printer." +msgstr "Nem lehet törölni a nyomtató utolsó kapcsolódó előbeállítását." -msgid "mm³/s" -msgstr "mm³/s" +msgid "Volume" +msgstr "Térfogat" -msgid "mm³/s²" -msgstr "mm³/s²" +msgid "Facets" +msgstr "Szempontok" -msgid "Mode" -msgstr "Mód" +msgid "Materials" +msgstr "Anyagok" -msgid "Model" -msgstr "Modell" +msgid "Manifold" +msgstr "Sokrétű" -msgid "model" -msgstr "modell" +msgid "Sliced Info" +msgstr "Szeletelt infó" -msgid "Model repair canceled" -msgstr "Modell javítás visszavonva" +msgid "Used Filament (m)" +msgstr "Szálhasználat (m)" -msgid "Model repair finished" -msgstr "Modell javítás kész" +msgid "Used Filament (mm³)" +msgstr "Szálhasználat (mm³)" -msgid "Modifications to the current profile will be saved." -msgstr "Az aktuális profil módosításai mentésre kerülnek." +msgid "Used Filament (g)" +msgstr "Szálhasználat (g)" -msgid "modified" -msgstr "módosított" +msgid "Used Material (unit)" +msgstr "Használt anyag (egység)" -msgid "Modifier" -msgstr "Módosító" +msgid "Cost (money)" +msgstr "Költség (pénz)" -msgid "Modifiers" -msgstr "Módosítók" +msgid "Number of tool changes" +msgstr "Szerszámcserék száma" -msgid "money/bottle" -msgstr "pénz/flakon" +msgid "Supports" +msgstr "Támasztékok" -msgid "money/kg" -msgstr "pénz/kg" +msgid "Select what kind of support do you need" +msgstr "Válassza ki, milyen támogatásra van szüksége" -msgid "Monotonic" -msgstr "Monotonikus" +msgid "Support on build plate only" +msgstr "Támogatás csak az ágytól" -msgid "More" -msgstr "Bővebben" +msgid "For support enforcers only" +msgstr "Csak a támogatást végrehajtóknak" -msgid "Mouse wheel" -msgstr "Egér görgő" +msgid "Everywhere" +msgstr "Mindenhol" -msgid "Mouse wheel:" -msgstr "Egér görgő:" +msgid "Brim" +msgstr "Perem" -msgid "Move" -msgstr "Mozgatás" +msgid "" +"This flag enables the brim that will be printed around each object on the " +"first layer." +msgstr "" +"Ez a jelző engedélyezi a peremet, amely az első réteg minden egyes objektuma " +"köré lesz nyomtatva." -msgid "Move active thumb Down" -msgstr "Aktív jelölő mozgatása Le" +msgid "Purging volumes" +msgstr "Tisztítási térfogatok" -msgid "Move active thumb Left" -msgstr "Az aktív jelölő balra mozgatása" +msgid "Pad" +msgstr "Párna" -msgid "Move active thumb Right" -msgstr "Az aktív jelölő jobbra mozgatása" +msgid "Select what kind of pad do you need" +msgstr "Válassza ki, milyen párnára van szüksége" -msgid "Move active thumb Up" -msgstr "Aktív jelölő mozgatása Fel" +msgid "Below object" +msgstr "Objektum alatt" -msgid "Move clipping plane" -msgstr "Vágási sík mozgatása" +msgid "Around object" +msgstr "Objektum körül" -msgid "Move drainage hole" -msgstr "Leeresztő furat mozgatása" +msgid "Send to printer" +msgstr "Nyomtatóra küldés" -msgid "Move Object" -msgstr "Objektum Mozgatása" +msgid "Slice now" +msgstr "Szeletelj most" -msgid "Move point" -msgstr "Pont mozgatása" +msgid "Hold Shift to Slice & Export G-code" +msgstr "Tartsa lenyomva a Shiftet a G-kód szeleteléséhez és exportálásához" -msgid "Move selection 10 mm in negative X direction" -msgstr "Kijelölés mozgatása 10 mm-rel negatív X irányban" +msgid "%d (%d shells)" +msgstr "%d (%d héjak)" -msgid "Move selection 10 mm in negative Y direction" -msgstr "Kijelölés mozgatása 10 mm-rel negatív Y irányban" +msgid "Auto-repaired (%d errors)" +msgstr "Automatikusan javított (%d hiba)" -msgid "Move selection 10 mm in positive X direction" -msgstr "Kijelölés mozgatása 10 mm-rel pozitív X irányban" +msgid "" +"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " +"facets reversed, %d backwards edges" +msgstr "" +"%d degenerált szempontok, %d élek javítva, %d szempontok eltávolítva, %d " +"szempontok hozzáadva, %d szempontok megfordítva, %d élek visszafelé" -msgid "Move selection 10 mm in positive Y direction" -msgstr "Kijelölés mozgatása 10 mm-rel pozitív Y irányban" +msgid "Yes" +msgstr "Igen" -msgid "Move support point" -msgstr "Támasztópont mozgatása" +msgid "Used Material (ml)" +msgstr "Használt anyag (ml)" -msgid "Movement" -msgstr "Mozgás" +msgid "object(s)" +msgstr "tárgy(ak)" -msgid "Movement in camera space" -msgstr "Mozgás a kameratérben" +msgid "supports and pad" +msgstr "támasztékok és párna" -msgid "Movement step set to 1 mm" -msgstr "A mozgatási lépték 1 mm-re állítása" +msgid "Used Filament (in)" +msgstr "Szálhasználat (be)" -msgid "" -"Multi material printers may need to prime or purge extruders on tool " -"changes. Extrude the excess material into the wipe tower." -msgstr "" -"A többféle anyaggal dolgozó nyomtatóknak szerszámváltáskor szükségük lehet " -"az extruderek előkészítésére vagy tisztítására. A felesleges anyagot a " -"törlőtoronyba extrudálja." - -msgid "Multi-part object detected" -msgstr "Több részből álló objektum észlelve" - -msgid "Multimaterial painting" -msgstr "Többanyagú festés" - -msgid "" -"Multiple %s devices found. Please only connect one at a time for flashing." -msgstr "" -"Több %s eszköz található. Kérjük, hogy a feltöltéshez egyszerre csak egyet " -"csatlakoztasson." - -msgid "" -"Multiple objects were loaded for a multi-material printer.\n" -"Instead of considering them as multiple objects, should I consider\n" -"these files to represent a single object having multiple parts?" -msgstr "" -"Több objektumot töltött be egy több-anyagos nyomtatóhoz.\n" -"Több különálló objektum helyett, egyetlen, több részből álló objektumként " -"kell betölteni őket?" +msgid "objects" +msgstr "tárgyak" -msgid "Multiply copies by creating a grid." -msgstr "Másolatok sokszorozása rács létrehozásával." +msgid "wipe tower" +msgstr "törlőtorony" -msgid "Multiply copies by this factor." -msgstr "Másolatok sokszorozása ezzel a tényezővel." +msgid "Color %1% at extruder %2%" +msgstr "Szín %1% az extrudernél %2%" -msgid "N/A" -msgstr "N/A" +msgid "Filament at extruder %1%" +msgstr "Szál az extruderben %1%" -msgid "Name" -msgstr "Név" +msgid "Used Filament (in³)" +msgstr "Szálhasználat (be³)" -msgid "Name of the printer" -msgstr "Nyomtató neve" +msgid "(including spool)" +msgstr "(orsóval együtt)" -msgid "" -"Name of the printer variant. For example, the printer variants may be " -"differentiated by a nozzle diameter." -msgstr "" -"A nyomtató változat neve. A nyomtató változatok például a fúvóka átmérője " -"alapján különböztethetők meg." +msgid "Cost" +msgstr "Költségek" -msgid "Name of the printer vendor." -msgstr "A nyomtató szállítójának neve." +msgid "normal mode" +msgstr "normál mód" -msgid "Name of the profile, from which this profile inherits." -msgstr "A profilnak a neve, amelytől ez a profil örököl." +msgid "stealth mode" +msgstr "csendes mód" -msgid "Names of presets related to the physical printer" -msgstr "A fizikai nyomtatóhoz tartozó előbeállítások nevei" +msgid "%s - Drop project file" +msgstr "%s - Projektfájl elhagyása" -msgid "Nearest" -msgstr "Legközelebbi" +msgid "Open as project" +msgstr "Megnyitás projektként" -msgid "Negative Volume" -msgstr "Negatív térfogat" +msgid "Import geometry only" +msgstr "Csak geometria importálása" -msgid "Network lookup" -msgstr "Hálózati keresés" +msgid "Import config only" +msgstr "Csak konfiguráció importálása" -msgid "New" -msgstr "Ú&j " +msgid "Select an action to apply to the file" +msgstr "Válassza ki a fájlra alkalmazandó műveletet" -msgid "New prerelease version %1% is available." -msgstr "Elérhető a(z) %1% új kiadás előtti verziója." +msgid "Action" +msgstr "Akció" -msgid "New printer preset selected" -msgstr "Új nyomtató előbeállítás kiválasztva" +msgid "Don't show again" +msgstr "Ne mutasd újra" -msgid "New Project" -msgstr "Új Projekt" +msgid "You can open only one .gcode file at a time." +msgstr "Egyszerre csak egy .gcode fájlt nyithat meg." -msgid "New release version %1% is available." -msgstr "Elérhető a(z) %1% új kiadott verziója." +msgid "Drag and drop G-code file" +msgstr "Húzza és tegye le a G-kód fájlt" -msgid "New Value" -msgstr "Új Érték" +msgid "Import Object" +msgstr "Objektum importálása" -msgid "New version of %s is available" -msgstr "A %s új verziója elérhető" +msgid "Load File" +msgstr "Fájl betöltése" -msgid "New version:" -msgstr "Új verzió:" +msgid "Load Files" +msgstr "Fájlok betöltése" -msgid "Next Redo action: %1%" -msgstr "Következő mégis művelet: %1%" +msgid "Fill bed" +msgstr "Ágy kitöltése" -msgid "Next Undo action: %1%" -msgstr "Következő visszavonás művelet: %1%" +msgid "Optimize Rotation" +msgstr "Forgatás optimalizálása" -msgid "No brim" -msgstr "Nincs karima" +msgid "Import SLA archive" +msgstr "SLA archívum importálása" msgid "" -"No color change event was added to the print. The print does not look like a " -"sign." +"Successfully unmounted. The device %s(%s) can now be safely removed from the " +"computer." msgstr "" -"A nyomtatáshoz nem adott hozzá színváltoztatási eseményt. A nyomtatás nem " -"úgy néz ki, mint a nézet." +"Sikeresen leválasztottuk. A %s(%s) eszköz most már biztonságosan " +"eltávolítható a számítógépről." -msgid "No errors detected" -msgstr "Nem észlelhető hiba" +msgid "Ejecting of device %s(%s) has failed." +msgstr "A %s(%s) eszköz kiadása sikertelen volt." -msgid "No extrusion" -msgstr "Nincs extrudálás" +msgid "New Project" +msgstr "Új projekt" -msgid "No extrusions were generated for objects." -msgstr "Az objektumokhoz nem készültek extrudálások." +msgid "Expand sidebar" +msgstr "Oldalsáv bővítése" -msgid "No pad can be generated for this model with the current configuration" -msgstr "" -"A jelenlegi konfigurációval nem lehet párnát generálni ehhez a modellhez" +msgid "Loading" +msgstr "Betöltés" -msgid "No previously sliced file." -msgstr "Nincs korábban szeletelt fájl." +msgid "Loading file" +msgstr "Fájl betöltése" -msgid "NO RAMMING AT ALL" -msgstr "EGYÁLTALÁN NINCS TÖMÖRÍTÉS" +msgid "Failed loading file \"%1%\" due to an invalid configuration." +msgstr "" +"A \"%1%\" fájl betöltése sikertelen volt érvénytelen konfiguráció miatt." -msgid "No sparse layers (EXPERIMENTAL)" -msgstr "Nincsenek ritkás rétegek (Kísérleti)" +msgid "" +"This file contains several objects positioned at multiple heights.\n" +"Instead of considering them as multiple objects, should I consider\n" +"this file as a single object having multiple parts?" +msgstr "" +"Ez a fájl több, magasságban elhelyezett objektumot tartalmaz.\n" +"Ahelyett, hogy több objektumnak tekinteném őket, inkább tekintsem úgy, hogy\n" +"ez a fájl egyetlen, több részből álló objektum?" -msgid "No support points will be placed closer than this threshold." +msgid "Multi-part object detected" +msgstr "Több részből álló objektum észlelve" + +msgid "" +"This file cannot be loaded in a simple mode. Do you want to switch to an " +"advanced mode?" msgstr "" -"Nem kerülnek támasztási pontok ennél a küszöbértéknél közelebb egymáshoz." +"Ez a fájl nem tölthető be egyszerű üzemmódban. Szeretne haladó módra váltani?" -msgid "No updates available" -msgstr "Nincs elérheő frissítés" +msgid "Detected advanced data" +msgstr "Érzékelt speciális adatok" -msgid "None" -msgstr "Egyik sem" +msgid "" +"You can't to add the object(s) from %s because of one or some of them " +"is(are) multi-part" +msgstr "" +"Nem lehet hozzáadni az objektum(ok)at a %s-ből, mert egy vagy néhány közülük " +"több részből áll(nak)" -msgid "Normal" -msgstr "Normál" +msgid "" +"Multiple objects were loaded for a multi-material printer.\n" +"Instead of considering them as multiple objects, should I consider\n" +"these files to represent a single object having multiple parts?" +msgstr "" +"Több objektumot töltöttek be egy több anyagból készült nyomathoz.\n" +"Ahelyett, hogy több objektumnak tekinteném őket, tekintsem\n" +"ezeket a fájlokat egyetlen, több részből álló objektumnak?" -msgid "Normal mode" -msgstr "Normál mód" +msgid "Loaded" +msgstr "Betöltve" -msgid "normal mode" -msgstr "normál mód" +msgid "" +"Your object appears to be too large, so it was automatically scaled down to " +"fit your print bed." +msgstr "" +"Az objektum túl nagynak tűnik, ezért automatikusan le lett méretezve, hogy " +"illeszkedjen a nyomtatóágyhoz." -msgid "not a ZIP archive" -msgstr "nem ZIP arcívum" +msgid "Object too large?" +msgstr "Túl nagy a tárgy?" -msgid "Not found:" -msgstr "Nem található:" +msgid "Export STL file:" +msgstr "STL fájl exportálása:" -msgid "Note" -msgstr "Megjegyzés" +msgid "Export AMF file:" +msgstr "AMF fájl exportálása:" -msgid "Note, that the selected preset will be deleted from this printer too." -msgid_plural "" -"Note, that the selected preset will be deleted from these printers too." -msgstr[0] "" -"Vegye figyelembe, hogy a kiválasztott előbeállítás törlődik erről a " -"nyomtatóról is." -msgstr[1] "" -"Vegye figyelembe, hogy a kiválasztott előbeállítás törlődik ezekről a " -"nyomtatókról is." +msgid "Save file as:" +msgstr "Fájl mentése mint:" -msgid "" -"Note, that this printer will be deleted after deleting the selected preset." -msgid_plural "" -"Note, that these printers will be deleted after deleting the selected preset." -msgstr[0] "" -"Vegye figyelembe, hogy ez a nyomtató is törlődik a kiválasztott előbeállítás " -"törlése után." -msgstr[1] "" -"Vegye figyelembe, hogy ezek a nyomtatók is törlődnek a kiválasztott " -"előbeállítás törlése után." +msgid "Export OBJ file:" +msgstr "OBJ fájl exportálása:" -msgid "NOTE:" -msgstr "MEGJEGYZÉS:" +msgid "Delete Object" +msgstr "Objektum törlése" -msgid "Note: AstroBox version at least 1.1.0 is required." -msgstr "Megjegyzés: Az AstroBox legalább 1.1.0-s verziója szükséges." +msgid "Reset Project" +msgstr "Projekt visszaállítása" msgid "" -"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " -"is required." +"The selected object can't be split because it contains more than one volume/" +"material." msgstr "" -"Megjegyzés: 2.00.02 vagy újabb firmware-rel és aktivált feltöltési " -"funkcióval rendelkező FlashAir szükséges." - -msgid "Note: OctoPrint version at least 1.1.0 is required." -msgstr "Megjegyzés: Az OctoPrint legalább 1.1.0-s verziója szükséges." - -msgid "Note: Repetier version at least 0.90.0 is required." -msgstr "Megjegyzés: A Repetier legalább 0.90.0-s verziója szükséges." +"A kijelölt objektum nem osztható fel, mert egynél több kötetet/anyagot " +"tartalmaz." -msgid "Note: some shortcuts work in (non)editing mode only." -msgstr "" -"Megjegyzés: egyes billentyűparancsok csak (nem)szerkesztési módban működnek." +msgid "Split to Objects" +msgstr "Felosztás objektumokra" -msgid "Note: This preset will be replaced after saving" -msgstr "Megjegyzés: Ez az előbeállítás a mentés után lecserélődik" +msgid "Invalid data" +msgstr "Érvénytelen adat" -msgid "Notes" -msgstr "Megjegyzések" +msgid "Ready to slice" +msgstr "Szeletelésre kész" -msgid "Notice" -msgstr "Megjegyzés" +msgid "Cancelling" +msgstr "Törlés" -msgid "Notify about new releases" -msgstr "Értesítés az új kiadásokról" +msgid "Another export job is currently running." +msgstr "Jelenleg egy másik exportálási feladat is fut." -msgid "nozzle" -msgstr "fúvóka" +msgid "Please select the file to reload" +msgstr "Kérjük, válassza ki az újratölteni kívánt fájlt" -msgid "Nozzle and Bed Temperatures" -msgstr "A fúvóka és a tárgyasztal hőmérséklete" +msgid "It is not allowed to change the file to reload" +msgstr "Nem megengedett a fájl módosítása az újratöltéshez" -msgid "Nozzle diameter" -msgstr "Fúvóka Átmérő" +msgid "Do you want to retry" +msgstr "Ismételjük meg" -msgid "Nozzle Diameter:" -msgstr "Fúvóka Átmérője:" +msgid "Reload from:" +msgstr "Újratöltés:" -msgid "Nozzle temperature" -msgstr "Fúvóka hőmérséklet" +msgid "Unable to reload:" +msgstr "Nem lehet újratölteni:" -msgid "Number of cooling moves" -msgstr "Hűtési lépések száma" +msgid "Error during reload" +msgstr "Hiba az újratöltéskor" -msgid "Number of extruders of the printer." -msgstr "A nyomtató Extrudereinek száma." +msgid "Reload all from disk" +msgstr "Újratöltés lemezről" msgid "" -"Number of interface layers to insert between the object(s) and support " -"material." +"ERROR: Please close all manipulators available from the left toolbar before " +"fixing the mesh." msgstr "" -"Az objektum(ok) és a támaszanyag közé beillesztendő interfész rétegek száma." +"HIBA: A háló rögzítése előtt zárja be a bal oldali eszköztáron elérhető " +"összes manipulátort." -msgid "" -"Number of interface layers to insert between the object(s) and support " -"material. Set to -1 to use support_material_interface_layers" +msgid "Fix through NetFabb" +msgstr "Javítás a NetFabb-on keresztül" + +msgid "Custom supports and seams were removed after repairing the mesh." msgstr "" -"Az objektum(ok) és a támaszanyag közé beillesztendő interfész rétegek száma. " -"Állítsa -1-re a support_material_interface_layers használatához" +"A háló javítása után eltávolították az egyedi támasztékokat és varratokat." -msgid "Number of pixels in" -msgstr "Pixelek száma" +msgid "There are active warnings concerning sliced models:" +msgstr "Aktív figyelmeztetések vannak a szeletelt modellekkel kapcsolatban:" -msgid "Number of pixels in X" -msgstr "Pixelek száma X irányban" +msgid "generated warnings" +msgstr "generált figyelmeztetések" -msgid "Number of pixels in Y" -msgstr "Pixelek száma Y irányban" +msgid "Cancelled" +msgstr "Törölve" -msgid "Number of solid layers to generate on bottom surfaces." -msgstr "Az alsó felületeken létrehozandó szilárd rétegek száma." +msgid "Remove the selected object" +msgstr "A kijelölt objektum eltávolítása" -msgid "Number of solid layers to generate on top and bottom surfaces." -msgstr "A felső és alsó felületeken létrehozandó tömör rétegek száma." +msgid "Add one more instance of the selected object" +msgstr "A kiválasztott objektum egy újabb példányának hozzáadása" -msgid "Number of solid layers to generate on top surfaces." -msgstr "A felső felületeken létrehozandó tömör rétegek száma." - -msgid "" -"Number of the layers needed for the exposure time fade from initial exposure " -"time to the exposure time" -msgstr "" -"A szükséges rétegek száma a kezdeti expozíciós időről az expozíciós időre " -"való átmenethez" +msgid "Remove one instance of the selected object" +msgstr "A kijelölt objektum egy példányának eltávolítása" -msgid "Number of tool changes" -msgstr "Szerszámcserék száma" +msgid "Set number of instances" +msgstr "Beállított példányok száma" -msgid "Object elevation" -msgstr "Objektum magassága" +msgid "Change the number of instances of the selected object" +msgstr "A kiválasztott objektum példányainak számának módosítása" -msgid "Object manipulation" -msgstr "Objektum manipuláció" +msgid "Fill bed with instances" +msgstr "Töltse meg az ágyat példányokkal" -msgid "Object name" -msgstr "Objektum neve" +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "" +"Töltse ki az ágy fennmaradó területét a kiválasztott objektum példányaival" -msgid "Object name: %1%" -msgstr "Objektum név: %1%" +msgid "Reload the selected object from disk" +msgstr "A kiválasztott objektum újratöltése a lemezről" -msgid "Object or Instance" -msgstr "Objektum vagy példány" +msgid "Export the selected object as STL file" +msgstr "A kiválasztott objektum exportálása STL fájlként" -msgid "Object reordered" -msgstr "Objektum átrendezve" +msgid "Along X axis" +msgstr "X tengelyen" -msgid "Object Settings to modify" -msgstr "Módosítható objektum beálltások" +msgid "Mirror the selected object along the X axis" +msgstr "A kijelölt objektum tükrözése az X tengely mentén" -msgid "" -"Object size from file %s appears to be zero.\n" -"This object has been removed from the model" -msgid_plural "" -"Objects size from file %s appears to be zero.\n" -"These objects have been removed from the model" -msgstr[0] "" -"A fájlban lévő %s objektum mérete nullának tűnik.\n" -"Ez az objektum eltávolításra került a modellből" -msgstr[1] "" -"A fájlban lévő %s objektumuk mérete nullának tűnik.\n" -"Ezek az objektumok eltávolításra kerültek a modellből" +msgid "Along Y axis" +msgstr "Y tengelyen" -msgid "Object too large?" -msgstr "Az objektum túl nagy?" +msgid "Mirror the selected object along the Y axis" +msgstr "A kijelölt objektum tükrözése az Y tengely mentén" -msgid "" -"Object will be used to purge the nozzle after a toolchange to save material " -"that would otherwise end up in the wipe tower and decrease print time. " -"Colours of the objects will be mixed as a result." -msgstr "" -"A szerszámcsere utáni tisztítás az objektum teljes egészén történik. Ez " -"csökkenti a hulladék mennyiségét, amely egyébként a törlőtoronyba kerülne, " -"emellett csökkenti a nyomtatási időt. Az objektumok színei emiatt keveredni " -"fognak." +msgid "Along Z axis" +msgstr "Z tengelyen" -msgid "object" -msgid_plural "objects" -msgstr[0] "objektum" -msgstr[1] "objektumok" +msgid "Mirror the selected object along the Z axis" +msgstr "A kijelölt objektum tükrözése a Z tengely mentén" -msgid "objects" -msgstr "objektumok" +msgid "Mirror" +msgstr "Tükör" -msgid "Objects List" -msgstr "Objektumok Listája" +msgid "Mirror the selected object" +msgstr "A kiválasztott objektum tükrözése" -msgid "Octagram Spiral" -msgstr "Octagram Spirál" +msgid "To objects" +msgstr "Tárgyakhoz" -msgid "OctoPrint version" -msgstr "OctoPrint verzió" +msgid "Split the selected object into individual objects" +msgstr "A kijelölt objektum egyes objektumokra bontása" -msgid "of a current Object" -msgstr "egy aktuális objektum_" +msgid "To parts" +msgstr "Alkatrészekhez" -msgid "Offset" -msgstr "Offset" +msgid "Split the selected object into individual sub-parts" +msgstr "A kijelölt objektum felosztása egyedi részekre" -msgid "Old Value" -msgstr "Régi Érték" +msgid "Split" +msgstr "Osztott" -msgid "" -"On OSX there is always only one instance of app running by default. However " -"it is allowed to run multiple instances of same app from the command line. " -"In such case this settings will allow only one instance." -msgstr "" -"OSX rendszeren alapértelmezés szerint mindig csak egy példány fut az " -"alkalmazásból. Mindazonáltal az alkalmazás több példánya is futtatható a " -"parancssorból. Ebben az esetben ez a beállítás csak egy példányt engedélyez." +msgid "Split the selected object" +msgstr "A kiválasztott objektum felosztása" -msgid "On overhangs only" -msgstr "Csak túlnyúlásokon" +msgid "Optimize orientation" +msgstr "Tájolás optimalizálása" -msgid "" -"On this system, %s uses HTTPS certificates from the system Certificate Store " -"or Keychain." +msgid "Optimize the rotation of the object for better print results." msgstr "" -"Ezen a rendszeren a %s HTTPS-tanúsítványokat használ a rendszer " -"tanúsítványtárolójából vagy kulcstárából." +"A jobb nyomtatási eredmények érdekében optimalizálja az objektum " +"elforgatását." -msgid "On/Off one layer mode of the vertical slider" -msgstr "A függőleges csúszka egyrétegű módjának Be/Kikapcsolása" - -msgid "One layer mode" -msgstr "Egyrétegű mód" - -msgid "One of the presets doesn't found" -msgstr "Az egyik előbeállítás nem található" +msgid "3D editor view" +msgstr "3D szerkesztő nézet" msgid "" -"One or more object were assigned an extruder that the printer does not have." +"%1% printer was active at the time the target Undo / Redo snapshot was " +"taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" -"Egy vagy több objektumhoz olyan extruder lett hozzárendelve, amely nincs a " -"nyomtatóban." - -msgid "Ongoing uploads" -msgstr "Folyamatban lévő feltöltések" +"%1% nyomtató aktív volt a célzott visszavonás/visszaállítás pillanatkép " +"elkészítésekor. A %1% nyomtatóra való váltás a %1% előbeállítások " +"újratöltését igényli." msgid "" -"Only a single object may be printed at a time in Spiral Vase mode. Either " -"remove all but the last object, or enable sequential mode by " -"\"complete_objects\"." +"You have unsaved changes, do you want to save your project or to remove all " +"settings and objects?" msgstr "" -"Spirálváza módban egyszerre csak egyetlen objektum nyomtatható. Vagy " -"távolítsa el az összes objektumot az utolsó kivételével, vagy engedélyezze a " -"szekvenciális módot a „complete_objects” paraméterrel." +"Vannak el nem mentett módosításai, el akarja menteni a projektet, vagy el " +"akarja távolítani az összes beállítást és objektumot?" -msgid "" -"Only create support if it lies on a build plate. Don't create support on a " -"print." -msgstr "" -"Csak akkor hozzon létre támaszt, ha az a tárgyasztalon nyugszik. Ne hozzon " -"létre támaszt a nyomtatáson." +msgid "Discard" +msgstr "Elvetés" -msgid "Only infill where needed" -msgstr "Kitöltés csak ott, ahol szükséges" +msgid "Load Project" +msgstr "Projekt betöltése" -msgid "Only lift Z" -msgstr "Csak a Z tengely emelése" +msgid "Import Objects" +msgstr "Objektumok importálása" -msgid "Only lift Z above" -msgstr "Z emelés csak efelett" +msgid "The selected file" +msgstr "A kijelölt fájl" -msgid "Only lift Z below" -msgstr "Z emelés csak ezalatt" +msgid "does not contain valid gcode." +msgstr "nem tartalmaz érvényes G-kódot." -msgid "Only retract when crossing perimeters" -msgstr "Visszahúzás csak kerület kereszezésekor" +msgid "Error while loading .gcode file" +msgstr "Hiba a .gcode fájl betöltése közben" -msgid "" -"Only the following installed printers are compatible with the selected " -"filaments" -msgstr "" -"Csak az alábbi telepített nyomtatók kompatibilisek a kiválasztott " -"filamentekkel" +msgid "All objects will be removed, continue?" +msgstr "Minden tárgyat eltávolítunk, folytatja?" -msgid "" -"Only the following installed printers are compatible with the selected SLA " -"materials" -msgstr "" -"Csak az alábbi telepített nyomtatók kompatibilisek a kiválasztott SLA " -"anyagokkal" +msgid "Delete Selected Objects" +msgstr "Kijelölt tárgyak törlése" -msgid "Ooze prevention" -msgstr "Szivárgás megelőzés" +msgid "Increase Instances" +msgstr "Instanciák növelése" -msgid "Ooze prevention is currently not supported with the wipe tower enabled." -msgstr "" -"A szivárgásmegelőzés jelenleg nem támogatott, ha a törlőtorony engedélyezve " -"van." +msgid "Decrease Instances" +msgstr "Instanciák csökkentése" -msgid "Open a G-code file" -msgstr "G-kód fájl megnyitása" +msgid "Enter the number of copies:" +msgstr "Írja be a példányszámot:" -msgid "Open a project file" -msgstr "Projekt fájl megnyitása" +msgid "Copies of the selected object" +msgstr "A kijelölt objektum másolatai" -msgid "Open as project" -msgstr "Megnyitás Projektként" +msgid "Set numbers of copies to %d" +msgstr "A másolatok számának beállítása %d-ra" -msgid "Open CA certificate file" -msgstr "CA tanúsítvány fájl megnyitása" +msgid "Cut by Plane" +msgstr "Síkkal vágva" -msgid "Open changelog page" -msgstr "Változáslista megnyitása" +msgid "Save G-code file as:" +msgstr "G-kód fájl mentése:" -msgid "Open download page" -msgstr "Letöltési oldal megnyitása" +msgid "Save SL1 / SL1S file as:" +msgstr "SL1 / SL1S fájl mentése:" -msgid "Open Folder." -msgstr "Mappa Megnyitása." +msgid "STL file exported to %s" +msgstr "STL fájl exportálva %s címre" -msgid "Open G-code file:" -msgstr "G-kód fájl megnyitása:" +msgid "AMF file exported to %s" +msgstr "AMF fájl exportálva %s címre" -msgid "Open G-code viewer" -msgstr "G-kód nézegető megnyitása" +msgid "Error exporting AMF file %s" +msgstr "Hiba az AMF fájl %s exportálásában" -msgid "Open hyperlink in default browser?" -msgstr "Hiperhivatkozás megnyitása az alapértelmezett böngészőben?" +msgid "3MF file exported to %s" +msgstr "3MF fájl exportálva %s címre" -msgid "Open new G-code viewer" -msgstr "Új G-kód nézegető megnyitása" +msgid "Error exporting 3MF file %s" +msgstr "Hiba a 3MF fájl %s exportálásában" -msgid "Open new instance" -msgstr "Új példány megnyitása" +msgid "Export" +msgstr "Exportálás" -msgid "Open New Instance" -msgstr "Új Példány Megnyitása" +msgid "Paste From Clipboard" +msgstr "Beillesztés vágólapról" -msgid "Open the dialog to modify shape gallery" -msgstr "Dialógusablak megnyitása az Alakzat Galéria szerkesztéséhez" +msgid "General" +msgstr "Általános" -msgid "Opening Configuration Wizard" -msgstr "Konfigurációs Varázsló Megnyitása" +msgid "Automation" +msgstr "Automatizálás" -msgid "Opening new project while some presets are unsaved." -msgstr "Új projekt megnyitása, miközben néhány előbeállítás nincs elmentve." +msgid "Auto-center parts" +msgstr "Autó-központi alkatrészek" msgid "" -"Opens Tip of the day notification in bottom right corner or shows another " -"tip if already opened." +"If this is enabled, Slic3r will auto-center objects around the print bed " +"center." msgstr "" -"Megnyitja a nap tippje értesítést a jobb alsó sarokban, vagy egy másik " -"tippet jelenít meg, ha már nyitva van." +"Ha ez be van kapcsolva, a Slic3r automatikusan a nyomtatóágy közepe köré " +"centrálja az objektumokat." -msgid "Optimize object rotation for best surface quality." -msgstr "" -"Az objektum forgatásának optimalizálása a legjobb felületminőség érdekében." +msgid "Background processing" +msgstr "Háttérfeldolgozás" msgid "" -"Optimize object rotation to have minimum amount of overhangs needing support " -"structures.\n" -"Note that this method will try to find the best surface of the object for " -"touching the print bed if no elevation is set." +"If this is enabled, Slic3r will pre-process objects as soon as they're " +"loaded in order to save time when exporting G-code." msgstr "" -"Optimalizálja az objektum forgását, hogy a lehető legkevesebb támasztékot " -"igénylő túlnyúlás legyen.\n" -"Vegye figyelembe, hogy ez a módszer megpróbálja megtalálni az objektum " -"legjobb felületét a tágyasztalhoz való érintkezéshez, amennyiben nincs " -"megadva magasság." +"Ha ez engedélyezve van, a Slic3r előfeldolgozza az objektumokat, amint " +"betöltődnek, hogy időt takarítson meg a G-kód exportálásakor." -msgid "Optimize orientation" -msgstr "Tájolás optimalizálása" - -msgid "Optimize Rotation" -msgstr "Tájolás Optimalizálása" +msgid "Switch to Preview when sliced" +msgstr "Váltás előnézetre szeleteléskor" msgid "" -"Optimize travel moves in order to minimize the crossing of perimeters. This " -"is mostly useful with Bowden extruders which suffer from oozing. This " -"feature slows down both the print and the G-code generation." +"When an object is sliced, it will switch your view from the curent view to " +"the preview (and then gcode-preview) automatically, depending on the option " +"choosen." msgstr "" -"Úgy optimalizálja az utazási mozgásokat, hogy minimalizálja a kerületek " -"keresztezését. Ez főként a szivárgástól szenvedő Bowden extrudereknél " -"hasznos. Ez a funkció lassítja a nyomtatást és a G-kód generálást." +"Amikor egy objektumot felszeletel, a kiválasztott opciótól függően " +"automatikusan átvált a nézet a jelenlegi nézetről az előnézetre (majd a " +"gcode-előnézetre)." -msgid "Options" -msgstr "Opciók" +msgid "Don't switch" +msgstr "Ne váltson" -msgid "Options for support material and raft" -msgstr "Támaszanyag és a tutaj lehetőségei" +msgid "Switch when possible" +msgstr "Váltás, ha lehetséges" -msgid "Options:" -msgstr "Opciók:" +msgid "Only if on platter" +msgstr "Csak ha tálcán" -msgid "or press \"+\" key" -msgstr "vagy nyomja meg a \"+\" billentyűt" +msgid "Only when GCode is ready" +msgstr "Csak ha a GCode készen áll" -msgid "Order object volumes by types" -msgstr "Objektum térfogatok rendezése típus szerint" +msgid "Presets and updates" +msgstr "Előbeállítások és frissítések" -msgid "Orientation found." -msgstr "Tájolás megtalálva." +msgid "" +"If enabled, Slic3r will check for the new versions of itself online. When a " +"new version becomes available a notification is displayed at the next " +"application startup (never during program usage). This is only a " +"notification mechanisms, no automatic installation is done." +msgstr "" +"Ha engedélyezve van, a Slic3r ellenőrzi, hogy vannak-e új verziói online. " +"Amikor egy új verzió elérhetővé válik, az alkalmazás következő indításakor " +"(soha nem a program használata közben) egy értesítés jelenik meg. Ez csak " +"egy értesítési mechanizmus, automatikus telepítés nem történik." -msgid "Orientation search canceled." -msgstr "Tájolás keresés visszavonva." +msgid "" +"If enabled, Slic3r downloads updates of built-in system presets in the " +"background. These updates are downloaded into a separate temporary location. " +"When a new preset version becomes available it is offered at application " +"startup." +msgstr "" +"Ha engedélyezve van, a Slic3r a háttérben tölti le a beépített rendszerbe " +"épített előbeállítások frissítéseit. Ezek a frissítések egy különálló " +"ideiglenes helyre kerülnek letöltésre. Amikor egy új előbeállítás verzió " +"elérhetővé válik, az alkalmazás indításakor felajánlja azt." -msgid "Origin" -msgstr "Origó" +msgid "Suppress \" - default - \" presets" +msgstr "Előbeállítások \" - alapértelmezett - \" elnyomása" -msgid "Other" -msgstr "Egyéb" +msgid "" +"Suppress \" - default - \" presets in the Print / Filament / Printer " +"selections once there are any other valid presets available." +msgstr "" +"Előbeállítások \" - alapértelmezett - \" elnyomása a Nyomtatás / Szál / " +"Nyomtató választásokban, ha más érvényes előbeállítások is rendelkezésre " +"állnak." -msgid "Other layers" -msgstr "További rétegek" +msgid "Show incompatible print and filament presets" +msgstr "Inkompatibilis nyomtatási és szálkészletek megjelenítése" -msgid "Other Vendors" -msgstr "További Gyártók" +msgid "" +"When checked, the print and filament presets are shown in the preset editor " +"even if they are marked as incompatible with the active printer" +msgstr "" +"Ha be van jelölve, a nyomtatási és szálelőállítások akkor is megjelennek az " +"előbeállítás-szerkesztőben, ha az aktív nyomtatóval nem kompatibilisnek " +"vannak jelölve" -msgid "Outer and inner brim" -msgstr "Külső és belső karima" +msgid "Main GUI always in expert mode" +msgstr "Fő felhasználói felület mindig szakértői módban" -msgid "Outer brim only" -msgstr "Csak külső karima" +msgid "" +"If enabled, the gui will be in expert mode even if the simple or advanced " +"mode is selected (but not the setting tabs)." +msgstr "" +"Ha engedélyezve van, a gui szakértői módban lesz, még akkor is, ha az " +"egyszerű vagy a haladó mód van kiválasztva (de a beállítások lapjai nem)." -msgid "Output File" -msgstr "Kimeneti Fájl" +msgid "Files" +msgstr "Fájlok" -msgid "Output file" -msgstr "Kimeneti fájl" +msgid "Export sources full pathnames to 3mf and amf" +msgstr "A források teljes elérési útvonalának exportálása 3mf és amf fájlba" -msgid "Output filename format" -msgstr "Kimeneti fájlnév formátum" +msgid "" +"If enabled, allows the Reload from disk command to automatically find and " +"load the files when invoked." +msgstr "" +"Ha engedélyezve van, lehetővé teszi, hogy a Reload from disk parancs " +"automatikusan megtalálja és betöltse a fájlokat." -msgid "Output Model Info" -msgstr "Modell Információ Kimenet" +msgid "If enabled, sets Slic3r as default application to open .3mf files." +msgstr "" +"Ha engedélyezve van, a Slic3r-t állítja be alapértelmezett alkalmazásként " +"a .3mf fájlok megnyitásához." -msgid "Output options" -msgstr "Kimeneti lehetőségek" +msgid "If enabled, sets Slic3r as default application to open .stl files." +msgstr "" +"Ha engedélyezve van, beállítja a Slic3r-t alapértelmezett alkalmazásként az ." +"stl fájlok megnyitásához." -msgid "Outside walls" -msgstr "Külső fal" +msgid "Remember output directory" +msgstr "Kimeneti könyvtár megjegyzése" -msgid "Overflow" -msgstr "Túlcsordulás" +msgid "" +"If this is enabled, Slic3r will prompt the last output directory instead of " +"the one containing the input files." +msgstr "" +"Ha ez be van kapcsolva, a Slic3r az utolsó kimeneti könyvtárat fogja kérni a " +"bemeneti fájlokat tartalmazó könyvtár helyett." -msgid "Overhang perimeter" -msgstr "Túllógó kerület" +msgid "Dialogs" +msgstr "Dialógusok" -msgid "Overhang threshold" -msgstr "Túlnyúlási küszöbértéke" +msgid "Show drop project dialog" +msgstr "Cseppprojekt dialógusok megjelenítése" -msgid "Overlap" -msgstr "Átfedés" +msgid "" +"When checked, whenever dragging and dropping a project file on the " +"application, shows a dialog asking to select the action to take on the file " +"to load." +msgstr "" +"Ha be van jelölve, amikor egy projektfájlt az alkalmazásra húz, megjelenik " +"egy párbeszédpanel, amelyben ki kell választani a betöltendő fájlra " +"vonatkozó műveletet." -msgid "P&rint Settings Tab" -msgstr "Nyomtatási Beállítások Fül" +msgid "Show overwrite dialog." +msgstr "Felülírási dialóguspanel megjelenítése." -msgid "Pad" -msgstr "Párna" +msgid "" +"If this is enabled, Slic3r will prompt for when overwriting files from save " +"dialogs." +msgstr "" +"Ha ez engedélyezve van, a Slic3r rákérdez, amikor felülírja a fájlokat a " +"mentési párbeszédpanelekből." -msgid "Pad around object" -msgstr "Párna az objektum körül" +msgid "Allow just a single %1% instance" +msgstr "Csak egyetlen %1% példány engedélyezése" -msgid "Pad around object everywhere" -msgstr "Párna az objektum körül mindenhol" +msgid "" +"On OSX there is always only one instance of app running by default. However " +"it is allowed to run multiple instances of same app from the command line. " +"In such case this settings will allow only one instance." +msgstr "" +"Az OSX rendszerben alapértelmezés szerint mindig csak egy példány fut az " +"alkalmazásból. Azonban ugyanazon alkalmazás több példánya is futtatható a " +"parancssorból. Ilyen esetben ez a beállítás csak egy példányt engedélyez." -msgid "Pad brim size" -msgstr "Párna karima mérete" +msgid "" +"If this is enabled, when starting Slic3r and another instance of the same " +"Slic3r is already running, that instance will be reactivated instead." +msgstr "" +"Ha ez engedélyezve van, akkor a Slic3r indításakor, ha ugyanannak a Slic3r-" +"nek egy másik példánya már fut, akkor az a példány fog újraindulni helyette." -msgid "Pad brim size is too small for the current configuration." -msgstr "A párna karimájának mérete túl kicsi a jelenlegi konfigurációhoz." +msgid "Ask for unsaved changes when closing application" +msgstr "Kérdezzen rá a nem mentett módosításokra az alkalmazás bezárásakor" -msgid "Pad object connector penetration" -msgstr "Párna objektum összekötő benyúlása" +msgid "When closing the application, always ask for unsaved changes" +msgstr "" +"Az alkalmazás bezárásakor mindig kérdezzen rá a nem mentett módosításokra" -msgid "Pad object connector stride" -msgstr "Párna objektum összekötő lépésköz" +msgid "Ask for unsaved changes when selecting new preset" +msgstr "" +"Új előbeállítás kiválasztásakor kérdezzen rá a nem mentett módosításokra" -msgid "Pad object connector width" -msgstr "Párna objektum összekötő szélessége" +msgid "Always ask for unsaved changes when selecting new preset" +msgstr "" +"Új előbeállítás kiválasztásakor mindig kérdezzen rá a nem mentett " +"változtatásokra" -msgid "Pad object gap" -msgstr "Párna objektum hézag" +msgid "Always keep current preset changes on a new project" +msgstr "" +"Mindig megtartja az aktuális előre beállított változtatásokat egy új " +"projektben" -msgid "Pad wall height" -msgstr "Párna fal magassága" +msgid "" +"When you create a new project, it will keep the current preset state, and " +"won't open the preset change dialog." +msgstr "" +"Amikor új projektet hoz létre, a program megtartja az aktuális előbeállítás " +"állapotát, és nem nyitja meg az előbeállítás módosítása párbeszédpanelt." -msgid "Pad wall slope" -msgstr "Párnafal meredekség" +msgid "Ask for unsaved project changes" +msgstr "Nem mentett projektmódosítások lekérdezése" -msgid "Pad wall thickness" -msgstr "Párna falvastagság" +msgid "" +"Always ask if you want to save your project change if you are going to loose " +"some changes. Or it will discard them by deafult." +msgstr "" +"Mindig kérdezd meg, hogy el akarod-e menteni a projektmódosítást, ha el " +"fogsz veszíteni néhány változtatást. Különben alapértelmezettként elveti " +"őket." -msgid "Page Down" -msgstr "Page Down" +msgid "Associate .gcode files to %1%" +msgstr ".gcode fájlok társítása %1%-hoz" -msgid "Page Up" -msgstr "Page Up" +msgid "If enabled, sets %1% as default application to open .gcode files." +msgstr "" +"Ha engedélyezve van, beállítja a %1%-ot alapértelmezett alkalmazásként a ." +"gcode fájlok megnyitásához." -msgid "Paint-on seam" -msgstr "Varrat festése" +msgid "Use Retina resolution for the 3D scene" +msgstr "Retina felbontás használata a 3D jelenethez" -msgid "Paint-on supports" -msgstr "Támaszték festés" +msgid "" +"If enabled, the 3D scene will be rendered in Retina resolution. If you are " +"experiencing 3D performance problems, disabling this option may help." +msgstr "" +"Ha engedélyezve van, a 3D jelenet Retina felbontásban kerül megjelenítésre. " +"Ha 3D-s teljesítményproblémák merülnek fel, ennek az opciónak a letiltása " +"segíthet." -msgid "Paints all facets inside, regardless of their orientation." -msgstr "Minden felületre fest, tájolástól függetlenül." +msgid "Splash screen" +msgstr "Kezdőképernyő" -msgid "Paints facets according to the chosen painting brush." -msgstr "A felületeket a választott festőecset szerint festi." +msgid "Show splash screen" +msgstr "Kezdőképernyő megjelenítése" + +msgid "Random splash screen" +msgstr "Véletlenszerű kezdőképernyő" + +msgid "Show a random splash screen image from the list at each startup" +msgstr "Minden indításkor egy véletlenszerűen kiválasztott kép megjelenítése" + +msgid "Splash screen image" +msgstr "Kezdőképernyő kép" + +msgid "Choose the image to use as splashscreen" +msgstr "Válassza ki a kezdőképernyőként használni kívánt képet" + +msgid "Others" +msgstr "Egyéb" + +msgid "Enable support for legacy 3DConnexion devices" +msgstr "A régebbi 3DConnexion eszközök támogatásának engedélyezése" msgid "" -"Paints neighboring facets whose relative angle is less or equal to set angle." +"If enabled, the legacy 3DConnexion devices settings dialog is available by " +"pressing CTRL+M" msgstr "" -"Olyan szomszédos oldalakat fest meg, amelyek relatív szöge kisebb vagy " -"egyenlő a beállított szöggel." +"Ha engedélyezve van, a régi 3DConnexion eszközök beállításai párbeszédpanel " +"a CTRL+M billentyűkombinációval érhető el" -msgid "Paints only one facet." -msgstr "Csak egy felületet fest meg." +msgid "Paths" +msgstr "Útvonalak" -msgid "parameter name" -msgstr "paraméter név" +msgid "FreeCAD path" +msgstr "FreeCAD útvonal" -msgid "Parameter validation" -msgstr "Paraméter hitelesítés" +msgid "" +"If it point to a valid freecad instance (the bin directory or the python " +"executable), you can use the built-in python script to quickly generate " +"geometry." +msgstr "" +"Ha ez egy érvényes freecad példányra mutat (a bin könyvtárra vagy a python " +"futtatható állományra), akkor a beépített python szkript segítségével " +"gyorsan generálhat geometriát." + +msgid "Camera" +msgstr "Kamera" + +msgid "Use perspective camera" +msgstr "Perspektív kamera használata" msgid "" -"Parsing of host response failed.\n" -"Message body: \"%1%\"\n" -"Error: \"%2%\"" +"If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" -"A host válasz elemzése nem sikerült. \n" -"Message body: \"%1%\" \n" -"Message: \"%2%\"" +"Ha engedélyezve van, használja a perspektivikus kamerát. Ha nincs " +"engedélyezve, ortográfiai kamerát használ." -msgid "Part" -msgstr "Alkatrész" +msgid "Use free camera" +msgstr "Szabad kamera használata" -msgid "Part manipulation" -msgstr "Alkatrész manipuláció" +msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgstr "" +"Ha engedélyezve van, használja a szabad kamerát. Ha nincs engedélyezve, " +"akkor korlátozott kamerát használ." -msgid "Part Settings to modify" -msgstr "Módosítható alkatrész beálltások" +msgid "Reverse direction of zoom with mouse wheel" +msgstr "A zoom irányának megfordítása az egérkerékkel" -msgid "Password" -msgstr "Jelszó" +msgid "If enabled, reverses the direction of zoom with mouse wheel" +msgstr "Ha engedélyezve van, megfordítja a zoom irányát az egérkerékkel" -msgid "Paste" -msgstr "Beillesztés" +msgid "GUI" +msgstr "GUI" -msgid "Paste clipboard" -msgstr "Beillesztés a vágólapról" +msgid "Controls" +msgstr "Vezérlők" -msgid "Paste from clipboard" -msgstr "Beillesztés a vágólapról" +msgid "Sequential slider applied only to top layer" +msgstr "Csak a legfelső rétegre alkalmazott szekvenciális csúszka" -msgid "Paste From Clipboard" -msgstr "Beillesztés Vágólapról" +msgid "" +"If enabled, changes made using the sequential slider, in preview, apply only " +"to gcode top layer. If disabled, changes made using the sequential slider, " +"in preview, apply to the whole gcode." +msgstr "" +"Ha engedélyezve vannak, a szekvenciális csúszkával végzett módosítások az " +"előnézetben csak a G-kód legfelső rétegére vonatkoznak. Ha letiltja, a " +"szekvenciális csúszkával végzett módosításokat az előnézetben, a teljes G-" +"kódra vonatkoznak." -msgid "Pattern" -msgstr "Mintázat" +msgid "Show sidebar collapse/expand button" +msgstr "Oldalsáv összecsukható/tágítható gomb megjelenítése" -msgid "Pattern angle" -msgstr "Mintázat szöge" +msgid "" +"If enabled, the button for the collapse sidebar will be appeared in top " +"right corner of the 3D Scene" +msgstr "" +"Ha engedélyezve van, a 3D jelenet jobb felső sarkában megjelenik az " +"összecsukható oldalsáv gombja" -msgid "Pattern spacing" -msgstr "Mintázat térköze" +msgid "" +"If enabled, the descriptions of configuration parameters in settings tabs " +"wouldn't work as hyperlinks. If disabled, the descriptions of configuration " +"parameters in settings tabs will work as hyperlinks." +msgstr "" +"Ha engedélyezve van, a beállítások lapjain a konfigurációs paraméterek " +"leírásai nem működnek hiperhivatkozásként. Ha letiltja, a beállítások " +"lapjain a konfigurációs paraméterek leírásai hiperhivatkozásként működnek." -msgid "Pattern used to generate support material." -msgstr "Támaszanyag létrehozásához használt mintázat." +msgid "Appearance" +msgstr "Megjelenés" -msgid "Pause" -msgstr "Felfüggesztés" +msgid "Use custom size for toolbar icons" +msgstr "Egyéni méret használata az eszköztár ikonjaihoz" -msgid "Pause print (\"%1%\")" -msgstr "Nyomtatás Szüneteltetése (\"%1%\")" +msgid "If enabled, you can change size of toolbar icons manually." +msgstr "" +"Ha engedélyezve van, az eszköztár ikonjainak méretét manuálisan módosíthatja." -msgid "Pause Print G-code" -msgstr "G-kód Nyomtatás Szüneteltetése" +msgid "Tab icon size" +msgstr "Lap ikon mérete" -msgid "Percentage" -msgstr "Százalék" +msgid "Size of the tab icons, in pixels. Set to 0 to remove icons." +msgstr "A lap ikonok mérete pixelben. Az ikonok eltávolításához állítsa 0-ra." -msgid "Perform cut" -msgstr "Vágás végrehajtása" +msgid "Display setting icons" +msgstr "Megjelenítő beállítások ikonjai" msgid "" -"Perform desktop integration (Sets this binary to be searchable by the " -"system)." +"The settings have a lock and dot to show how they are modified. You can hide " +"them by uncheking this option." msgstr "" -"Asztali integráció végrehajtása (beállítja, hogy a bináris fájl kereshető " -"legyen a rendszer számára)." +"A beállítások egy lakattal és egy ponttal jelzik a módosítás módját. Ezeket " +"elrejtheti, ha feloldja ezt az opciót." + +msgid "Use custom tooltip" +msgstr "Egyéni eszköztár használata" msgid "" -"Performance vs accuracy of calculation. Lower values may produce unwanted " -"artifacts." +"On some OS like MacOS or some Linux, tooltips can't stay on for a long time. " +"This setting replaces native tooltips with custom dialogs to improve " +"readability (only for settings).\n" +"Note that for the number controls, you need to hover the arrows to get the " +"custom tooltip. Also, it keeps the focus but will give it back when it " +"closes. It won't show up if you are editing the field." msgstr "" -"Teljesítmény kontra számítási pontosság. Az alacsonyabb értékek nemkívánatos " -"műtermékeket okozhatnak." +"Néhány operációs rendszeren, mint például a MacOS vagy néhány Linux, az " +"eszköztippek nem maradnak sokáig bekapcsolva. Ez a beállítás a natív " +"eszköztippeket egyéni párbeszédpanelekkel helyettesíti az olvashatóság " +"javítása érdekében (csak a beállítások esetében).\n" +"Vegye figyelembe, hogy a számvezérlők esetében a nyilak fölé kell mozgatnia " +"a nyilakat, hogy megjelenjen az egyéni eszköztipp. Emellett megtartja a " +"fókuszt, de bezáráskor visszaadja azt. Nem jelenik meg, ha éppen szerkeszti " +"a mezőt." -msgid "Perimeter" -msgstr "Kerület" +msgid "Colors" +msgstr "Színek" -msgid "Perimeter extruder" -msgstr "Kerület extruder" +msgid "Very dark gui color" +msgstr "Nagyon sötét gui szín" -msgid "perimeters" -msgstr "határ _ nyomtatásakor" +msgid "Very dark color, in the RGB hex format." +msgstr "Nagyon sötét szín, RGB hex formátumban." -msgid "Perimeters" -msgstr "Kerületek" +msgid "Mainly used as background or dark text color." +msgstr "Főleg háttérként vagy sötét szövegszínként használatos." -msgid "Physical Printer" -msgstr "Fizikai Nyomtató" +msgid "" +"Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): " +"0047c7" +msgstr "" +"Slic3r(sárga): ada230, PrusaSlicer(narancs): c46737, SuperSlicer(kék): 0047c7" -msgid "Physical printers" -msgstr "Fizikai nyomtatók" +msgid "Dark gui color" +msgstr "Sötét gui szín" -msgid "Pick another vendor supported by %s" -msgstr "A %s által támogatott egyéb gyártó kiválasztása" +msgid "Dark color, in the RGB hex format." +msgstr "Sötét szín, RGB hex formátumban." + +msgid "Mainly used as icon color." +msgstr "Főleg ikonszínként használják." msgid "" -"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " -"following format: \"XxY, XxY, ...\"" +"Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): " +"2172eb" msgstr "" -"A képméreteket .gcode és .sl1 / .sl1s fájlokban kell tárolni, a következő " -"formátumban: \"XxY, XxY, ...\"." - -msgid "Pillar connection mode" -msgstr "Pillér összekötési mód" +"Slic3r(sárga): cabe39, PrusaSlicer(narancs): ed6b21, SuperSlicer(kék): 2172eb" -msgid "Pillar diameter" -msgstr "Pillér átmérője" +msgid "Gui color" +msgstr "Gui szín" -msgid "Pillar widening factor" -msgstr "Pillérszélesítési tényező" +msgid "Main color, in the RGB hex format." +msgstr "Fő szín, RGB hex formátumban." -msgid "Pinhead diameter should be smaller than the pillar diameter." -msgstr "A tűfej átmérőjének kisebbnek kell lennie, az oszlop átmérőjénél." +msgid "" +"Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): " +"428dfd" +msgstr "" +"Slic3r(sárga): eddc21, PrusaSlicer(narancs): fd7e42, SuperSlicer(kék): 428dfd" -msgid "Pinhead front diameter" -msgstr "Tűfej elülső átmérője" +msgid "Light gui color" +msgstr "Világos gui szín" -msgid "Pinhead width" -msgstr "Tűfej szélessége" +msgid "Light color, in the RGB hex format." +msgstr "Világos szín, RGB hex formátumban." -msgid "Place bearings in slots and resume printing" -msgstr "Helyezze a csapágyakat a nyílásokba, és folytassa a nyomtatást" +msgid "" +"Slic3r(yellow): ffee38, PrusaSlicer(orange): feac8b, SuperSlicer(blue): " +"8bb9fe" +msgstr "" +"Slic3r(sárga): ffee38, PrusaSlicer(narancs): feac8b, SuperSlicer(kék): 8bb9fe" -msgid "Place on face" -msgstr "Felületre helyezés" +msgid "Very light gui color" +msgstr "Nagyon világos gui szín" -msgid "Plater" -msgstr "Tárgyasztal" +msgid "Very light color, in the RGB hex format." +msgstr "Nagyon világos szín, RGB hex formátumban." -msgid "Please check your object list before preset changing." -msgstr "Ellenőrizze az objektumlistát, előbeállítás váltás előtt." +msgid "Mainly used as light text color." +msgstr "Főleg világos szövegszínként használatos." msgid "" -"Please save your project and restart PrusaSlicer. We would be glad if you " -"reported the issue." +"Slic3r(yellow): fef48b, PrusaSlicer(orange): ff7d38, SuperSlicer(blue): " +"428cff" msgstr "" -"Mentse el a projektet, és indítsa újra a PrusaSlicert. Örülnénk, ha " -"jelentené a problémát." +"Slic3r(sárga): fef48b, PrusaSlicer(narancs): ff7d38, SuperSlicer(kék): 428cff" -msgid "Please select the file to reload" -msgstr "Válassza ki az újratöltendő fájlt" +msgid "Render" +msgstr "Renderelés" -msgid "Portions copyright" -msgstr "Az összetevők szerzői joga" +msgid "Use environment map" +msgstr "Környezeti térkép használata" -msgid "Portrait" -msgstr "Portré" +msgid "If enabled, renders object using the environment map." +msgstr "" +"Ha engedélyezve van, az objektumot a környezeti térkép használatával " +"rendereli." -msgid "Position" -msgstr "Pozíció" +msgid "You need to restart %s to make the changes effective." +msgstr "Újra kell indítania a %s-t, hogy a módosítások érvénybe lépjenek." -msgid "Position of perimeters starting points." -msgstr "A kerületi kiindulási pontok helyzete." +msgid "Are you sure?" +msgstr "Biztos benne?" -msgid "Post processing scripts shall modify G-code file in place." -msgstr "Az utófeldolgozási szkriptek a G-kód fájlt helyben módosítják." +msgid "Icon size in a respect to the default size" +msgstr "Az ikon mérete az alapértelmezett mérethez képest" -msgid "Post-processing scripts" -msgstr "Utófeldolgozó szkriptek" +msgid "Select toolbar icon size in respect to the default one." +msgstr "Az eszköztár ikonméretének kiválasztása az alapértelmezetthez képest." -msgid "Preferences" -msgstr "Beállítások" +msgid "Layout with the tab bar" +msgstr "Elrendezés a tabulátorral" -msgid "Preferred direction of the seam" -msgstr "A varrat preferált iránya" +msgid "Legacy layout" +msgstr "Örökölt elrendezés" -msgid "Preferred direction of the seam - jitter" -msgstr "Varrat preferált iránya - jitter" +msgid "Access via settings button in the top menu" +msgstr "Hozzáférés a felső menü beállítások gombjával" -msgid "Preparing infill" -msgstr "Kitöltés előkészítése" +msgid "Settings in non-modal window" +msgstr "Beállítások a nem modális ablakban" -msgid "Preparing settings tabs" -msgstr "A beállítások fül előkészítése" +msgid "Layout Options" +msgstr "Elrendezési opciók" -msgid "" -"Preselects faces by overhang angle. It is possible to restrict paintable " -"facets to only preselected faces when the option \"%1%\" is enabled." -msgstr "" -"A felületeket a túlnyúlási szög alapján választja ki. Ha a \"%1%\" opció " -"engedélyezve van, akkor a festhető lapokat az előre kiválasztott lapokra " -"korlátozhatja." +msgid "!! Can be unstable in some os distribution !!" +msgstr "!! Bizonyos OS disztribúciókban instabil lehet !!" -msgid "Preset \"%1%\" has the following unsaved changes:" +msgid "Choose how the windows are selectable and displayed:" msgstr "" -"A \"%1%\" előbeállítás a következő el nem mentett változásokat tartalmazza:" +"Válassza ki, hogy az ablakok hogyan legyenek kiválaszthatók és " +"megjeleníthetők:" msgid "" -"Preset \"%1%\" is not compatible with the new print profile and it has the " -"following unsaved changes:" +" Tab layout: all windows are in the application, all are selectable via a " +"tab." msgstr "" -"A \"%1%\" előbeállítás nem kompatibilis az új nyomtatási profillal, és a " -"következő el nem mentett változtatásokat tartalmazza:" +" Lap elrendezés: az összes ablak az alkalmazásban van, mindegyik " +"kiválasztható egy tabulátoron keresztül." msgid "" -"Preset \"%1%\" is not compatible with the new printer profile and it has the " -"following unsaved changes:" +"Old layout: all windows are in the application, settings are on the top tab " +"bar and the platter choice in on the bottom of the platter view." msgstr "" -"A \"%1%\" előbeállítás nem kompatibilis az új nyomtatóprofillal, és a " -"következő el nem mentett változtatásokat tartalmazza:" +"Régi elrendezés: az összes ablak az alkalmazásban van, a beállítások a felső " +"fülek sávján, a tányérválasztás pedig a tányérnézet alján." msgid "" -"Preset with name \"%1%\" already exists and is incompatible with selected " -"printer." +"Settings button: all windows are in the application, no tabs: you have to " +"clic on settings gears to switch to settings tabs." msgstr "" -"A \"%1%\" nevű előbeállítás már létezik, és nem kompatibilis a kiválasztott " -"nyomtatóval." - -msgid "Preset with name \"%1%\" already exists." -msgstr "A \"%1%\" nevű előbeállítás már létezik." +"Beállítások gomb: minden ablak az alkalmazásban van, nincsenek fülek: a " +"beállítások fogaskerekére kell kattintania, hogy a beállítások fülekre " +"váltson." msgid "" -"Presets are different.\n" -"Click this button to select the same preset for the right and left preset." +"Settings window: settings are displayed in their own window. You have to " +"clic on settings gears to show the settings window." msgstr "" -"Az előbeállítások különbözőek.\n" -"Erre a gombra kattintva ugyanazt az előbeállítást választhatja ki a jobb és " -"a bal előbeállításhoz." - -msgid "Presets are the same" -msgstr "Az előbeállítások megyegyeznek" +"Beállítások ablak: a beállítások saját ablakban jelennek meg. A beállítások " +"ablakának megjelenítéséhez a beállítások fogaskerekére kell kattintania." -msgid "Press %1%left mouse button to enter the exact value" -msgstr "Nyomja meg a %1% bal egérgombot a pontos érték megadásához" - -msgid "Press to activate deselection rectangle" -msgstr "Nyomja meg a kijelölés megszüntetése téglalap aktiválásához" +msgid "System presets" +msgstr "Rendszerbeállítások" -msgid "Press to activate selection rectangle" -msgstr "Nyomja meg a kiválasztási téglalap aktiválásához" +msgid "User presets" +msgstr "Felhasználói beállítások" -msgid "" -"Press to select multiple objects\n" -"or move multiple objects with mouse" -msgstr "" -"Nyomja meg a gombot több objektum kiválasztásához\n" -"vagy egérrel való mozgatásáshoz" +msgid "Incompatible presets" +msgstr "Inkompatibilis előbeállítások" -msgid "" -"Press to speed up 5 times while moving thumb\n" -"with arrow keys or mouse wheel" -msgstr "" -"Nyomja meg 5-szörös gyorsításhoz a jelölő\n" -"nyílbillentyűkkel vagy egérgörgővel való mozgatása közben" +msgid "Are you sure you want to delete \"%1%\" printer?" +msgstr "Biztos, hogy törölni szeretné a \"%1%\" nyomtatót?" -msgid "Preview" -msgstr "Előnézet" +msgid "Delete Physical Printer" +msgstr "Fizikai nyomtató törlése" -msgid "Preview hollowed and drilled model" -msgstr "Az üreges és kifúrt modell előnézete" +msgid "Click to edit preset" +msgstr "Klikk az előbeállítás szerkesztéséhez" -msgid "Previously sliced file (" -msgstr "A korábban szeletelt fájl (" +msgid "Add/Remove presets" +msgstr "Előbeállítások hozzáadása/eltávolítása" -msgid "Prime all printing extruders" -msgstr "Az összes nyomtató extruder előkészítése" +msgid "Add physical printer" +msgstr "Fizikai nyomtató felvétele" -msgid "print" -msgstr "nyomtatás" +msgid "Edit preset" +msgstr "Előbeállítás szerkesztése" -msgid "Print" -msgstr "Nyomtatás" +msgid "Edit physical printer" +msgstr "Fizikai nyomtató szerkesztése" -msgid "Print &Host Upload Queue" -msgstr "Nyomtató-feltöltési várakozási sor" +msgid "Delete physical printer" +msgstr "Fizikai nyomtató törlése" -msgid "" -"Print contour perimeters from the outermost one to the innermost one instead " -"of the default inverse order." -msgstr "" -"A kerületeket a legkülsőtől a legbelsőig nyomtatja az alapértelmezett " -"fordított sorrend helyett." +msgid "Physical printers" +msgstr "Fizikai nyomtatók" -msgid "Print Diameters" -msgstr "Nyomtatási átmérők" +msgid "Add/Remove filaments" +msgstr "Szálak hozzáadása/eltávolítása" -msgid "Print Host upload" -msgstr "Nyomtató feltöltés" +msgid "Add/Remove materials" +msgstr "Anyagok hozzáadása/eltávolítása" -msgid "Print host upload queue" -msgstr "Nyomtató-feltöltési várakozási sor" +msgid "Add/Remove printers" +msgstr "Nyomtatók hozzáadása/eltávolítása" -msgid "Print mode" -msgstr "Nyomtatási mód" +msgid "will run at %1%%% by default" +msgstr "alapértelmezés szerint %1%%%-on fog futni" -msgid "Print pauses" -msgstr "Nyomtátási szünetek" +msgid "at %1%%% over external perimeters" +msgstr "%1%%%-ban a külső határok felett" -msgid "Print settings" -msgstr "Nyomtatási beállítások" +msgid "at %1%%% over top fill surfaces" +msgstr "%1%%%-ban a felső töltőfelületek felett" -msgid "Print Settings" -msgstr "Nyomtatási Beállítások" +msgid "at %1%%% over all bridges" +msgstr "%1%%%-nál az összes hídnál" -msgid "Print Settings Tab" -msgstr "Nyomtatási Beállítások Fül" +msgid "at %1%%% over bridges" +msgstr "%1%%%-nál a hidak felett" -msgid "Print speed" -msgstr "Nyomtatási sebesség" +msgid "at %1%%% over infill bridges" +msgstr "%1%%%-nál a töltéshidak felett" -msgid "Print speed override" -msgstr "Nyomtatási sebesség felülbírálás" +msgid "except for the first %1% layers where the fan is disabled" +msgstr "kivéve az első %1% réteget, ahol a ventilátor ki van kapcsolva" -msgid "Print&er Settings Tab" -msgstr "Nyomtató Beállítások Fül" +msgid "except for the first layer where the fan is disabled" +msgstr "kivéve az első réteget, ahol a ventilátor ki van kapcsolva" -msgid "printer" -msgstr "nyomtató" +msgid " and will gradually speed-up to the above speeds over %1% layers" +msgstr " és fokozatosan felgyorsul a fenti sebességekig %1%-os rétegek felett" -msgid "Printer" -msgstr "Nyomtató" +msgid "will be turned off by default." +msgstr "alapértelmezés szerint ki lesz kapcsolva." -msgid "Printer absolute correction" -msgstr "Nyomtató abszolút korrekció" +msgid "" +"\n" +"\n" +"If estimated layer time is below ~%1%s, but still greater than ~%2%s, fan " +"will run at a proportionally increasing speed between %3%%% and %4%%%" +msgstr "" +"\n" +"\n" +"Ha a becsült rétegidő ~%1%s alatt van, de még mindig nagyobb, mint ~%2%s, a " +"ventilátor arányosan növekvő sebességgel fog működni %3%%% és %4%%% között" -msgid "Printer gamma correction" -msgstr "Nyomtató Gamma korrekció" +msgid "between %1%%% %2%%% over external perimeters" +msgstr "%1%%% %2%%% között a külső határok felett" -msgid "printer model" -msgstr "nyomtató modell" +msgid "between %1%%% %2%%% over bridges" +msgstr "%1%%% %2%%% között a hidak felett" -msgid "Printer notes" -msgstr "Nyomtató megjegyzések" +msgid "between %1%%% %2%%% over infill bridges" +msgstr "%1%%% %2%%% között a töltéshidak fölött" -msgid "Printer preset names" -msgstr "Nyomtató előbeállítás nevek" +msgid "" +"\n" +"\n" +"If estimated layer time is below ~%1%s" +msgstr "" +"\n" +"\n" +"Ha a becsült rétegidő kevesebb, mint ~%1%s" -msgid "Printer scaling correction" -msgstr "Nyomtató méretkorrekciója" +msgid "fan will run by default to %1%%%" +msgstr "a ventilátor alapértelmezés szerint %1%%%-ra fog futni" -msgid "Printer scaling correction in X axis" -msgstr "Nyomtató méretkorrekciója az X tengelyen" +msgid "" +"print speed will be reduced so that no less than %1%s are spent on that layer" +msgstr "" +"a nyomtatási sebességet úgy csökkentjük, hogy az adott rétegre legalább %1%-" +"nyi időt fordítunk" -msgid "Printer scaling correction in Y axis" -msgstr "Nyomtató méretkorrekciója az Y tengelyen" +msgid "" +"(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)" +msgstr "" +"(a sebesség azonban soha nem csökken %1%mm/mp alá vagy legfeljebb %2%%%-os " +"csökkenésig)" -msgid "Printer scaling correction in Z axis" -msgstr "Nyomtató méretkorrekciója a Z tengelyen" +msgid "(however, speed will never be reduced below %1%mm/s)" +msgstr "(a sebesség azonban soha nem csökken %1%mm/mp alá)" -msgid "Printer scaling X axis correction" -msgstr "Nyomtató méretkorrekciója az X tengelyen" +msgid "external perimeters" +msgstr "külső kerületeket" -msgid "Printer scaling Y axis correction" -msgstr "Printer scaling correction in Y axis" +msgid "perimeters" +msgstr "kerületek" -msgid "Printer scaling Z axis correction" -msgstr "Nyomtató méretkorrekciója a Z tengelyen" +msgid "infill" +msgstr "kitöltés" -msgid "Printer Settings" -msgstr "Nyomtató Beállítások" +msgid "solid infill" +msgstr "tömör kitöltés" -msgid "Printer Settings Tab" -msgstr "Nyomtató Beállítások Fül" +msgid "top solid infill" +msgstr "felső tömör kitöltés" -msgid "Printer technology" -msgstr "Nyomtató technológia" +msgid "support" +msgstr "támasztás" -msgid "Printer type" -msgstr "Nyomtató típusa" +msgid "support interface" +msgstr "támasztó felület" -msgid "Printer variant" -msgstr "Nyomtató változat" +msgid "%s flow rate is maximized " +msgstr "%s áramlási sebesség maximalizálva " -msgid "Printer vendor" -msgstr "Nyomtató szállítója" +msgid "First layer volumetric" +msgstr "Első réteg térfogat" -msgid "Printer with name \"%1%\" already exists." -msgstr "A \"%1%\" nevű nyomtató már létezik." +msgid "Bridging volumetric" +msgstr "Áthidaló térfogat" -msgid "Printer:" -msgstr "Nyomtató:" +msgid "Volumetric" +msgstr "Térfogat" msgid "" -"Printing with multiple extruders of differing nozzle diameters. If support " -"is to be printed with the current extruder (support_material_extruder == 0 " -"or support_material_interface_extruder == 0), all nozzles have to be of the " -"same diameter." +"by the print profile maximum volumetric rate of %3.2f mm³/s at filament " +"speed %3.2f mm/s." msgstr "" -"Nyomtatás több, különböző fúvókaátmérőjű extruderrel. Ha a támasztékot az " -"aktuális extruderrel kell nyomtatni (support_material_extruder == 0 vagy " -"support_material_interface_extruder == 0), akkor minden fúvókának azonos " -"átmérőjűnek kell lennie." +"a nyomtatási profil maximális térfogatgyorsasága %3,2f mm³/mp, %3,2f mm/mp " +"szálsebesség mellett." -msgid "Processing %s" -msgstr "Feldolgozás %s" +msgid "" +"when printing %s with a volumetric rate of %3.2f mm³/s at filament speed " +"%3.2f mm/s." +msgstr "" +"%s térfogatszázalékos %3,2f mm³/mp nyomtatásakor %3,2f mm/mp szálsebességgel." -msgid "Profile dependencies" -msgstr "Profilfüggőségek" +msgid "" +"Recommended object min thin wall thickness: Not available due to invalid " +"layer height." +msgstr "" +"Ajánlott tárgy min vékony falvastagság: Nem elérhető az érvénytelen " +"rétegmagasság miatt." -msgid "Profile:" -msgstr "Profil:" +msgid "Recommended object min (thick) wall thickness for layer height %.2f and" +msgstr "Ajánlott tárgy min (vastag) falvastagság rétegmagassághoz %.2f és" -msgid "Progress" -msgstr "Előrehaladás" +msgid "%d perimeter: %.2f mm" +msgstr "%d kerület: %.2f mm" -msgid "Progress:" -msgstr "Előrehaladás:" +msgid "" +"Recommended object thin wall thickness: Not available due to excessively " +"small extrusion width." +msgstr "" +"Ajánlott tárgy vékony falvastagság: Túlságosan kicsi extrudálási szélesség " +"miatt nem elérhető." -msgid "Project is loading" -msgstr "A projekt betöltődik" +msgid "" +"Ideally, the spacing between two extrusions shouldn't be lower than the " +"nozzle diameter. Below are the extrusion widths for a spacing equal to the " +"nozzle diameter.\n" +msgstr "" +"Ideális esetben a két extrudálás közötti távolság nem lehet kisebb, mint a " +"fúvóka átmérője. Az alábbiakban a fúvóka átmérőjével megegyező távolságra " +"vonatkozó extrudálási szélességeket találja.\n" -msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" -msgstr "A PrusaSlicer végzetes hibába ütközött: \"%1%\"" +msgid "" +"Recommended min extrusion width for the first layer (with a first layer " +"height of %1%) is %2$.3f mm (or %3%%%)\n" +msgstr "" +"Az első réteg ajánlott minimális extrudálási szélessége (az első réteg " +"magassága %1%) %2$.3f mm (vagy %3%%%).\n" -msgid "PrusaSlicer: Open hyperlink" -msgstr "PrusaSlicer: Hiperhivatkozás megnyitása" +msgid "" +"Recommended min extrusion width for other layers (with a layer height of " +"%1%) is %2$.3f mm (or %3%%%).\n" +msgstr "" +"Az ajánlott minimális extrudálási szélesség más rétegeknél (%1% " +"rétegmagassággal) %2$.3f mm (vagy %3%%%).\n" msgid "" -"Purging after toolchange will be done inside this object's infills. This " -"lowers the amount of waste but may result in longer print time due to " -"additional travel moves." +"Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" -"A szerszámcsere utáni tisztítás az objektum kitöltésén belül történik. Ez " -"csökkenti a hulladék mennyiségét, de a további mozgások miatt hosszabb " -"nyomtatási időt eredményezhet." +"Felső/alsó héjvastagság tipp: Nem áll rendelkezésre az érvénytelen " +"rétegmagasság miatt." -msgid "Purging volumes" -msgstr "Öblítési térfogatok" +msgid "Top shell is %1% mm thick for layer height %2% mm." +msgstr "A felső héj vastagsága %1% mm, rétegmagassága %2% mm." -msgid "Purging volumes - load/unload volumes" -msgstr "Öblítési mennyiségek - betöltött/kiürített téfogat" +msgid "Minimum top shell thickness is %1% mm." +msgstr "A felső héj minimális vastagsága %1% mm." -msgid "Purging volumes - matrix" -msgstr "Öblítési mennyiségek - mátrix" +msgid "Top is open." +msgstr "Felül nyitott." -msgid "Purpose of Machine Limits" -msgstr "A gépi korlátok célja" +msgid "Bottom shell is %1% mm thick for layer height %2% mm." +msgstr "Az alsó héj vastagsága %1% mm, rétegmagassága %2% mm." -msgid "Quality" -msgstr "Minőség" +msgid "Minimum bottom shell thickness is %1% mm." +msgstr "Az alsó héj minimális vastagsága %1% mm." -msgid "Quality / Speed" -msgstr "Minőség / Sebesség" +msgid "Bottom is open." +msgstr "Alul nyitott." -msgid "Quick" -msgstr "Gyors" +msgid "Send G-Code to printer host" +msgstr "G-kód küldése a nyomtató gazdagépnek" -msgid "Quick Slice" -msgstr "Gyors Szeletelés" +msgid "Upload to Printer Host with the following filename:" +msgstr "Töltse fel a gazdagépre a következő fájlnévvel:" -msgid "Quick Slice and Save As" -msgstr "Gyors Szeletelés és Mentés Másként" +msgid "Start printing after upload" +msgstr "Nyomtatás indítása feltöltés után" -msgid "Quit %s" -msgstr "Kilépés %s" +msgid "Use forward slashes ( / ) as a directory separator if needed." +msgstr "" +"Szükség esetén könyvtárelválasztóként használjon átlós írásjeleket ( / )." -msgid "Quit, I will move my data now" -msgstr "Kilépés, most áthelyezem az adataimat" +msgid "Group" +msgstr "Csoport" -msgid "Radius" -msgstr "Sugár" +msgid "ID" +msgstr "ID" -msgid "Raft" -msgstr "Tutaj" +msgid "Progress" +msgstr "Haladás" -msgid "Raft contact Z distance" -msgstr "Tutaj érintkezés Z távolság" +msgid "Status" +msgstr "Státusz" -msgid "Raft expansion" -msgstr "Tutaj kiterjesztés" +msgid "Host" +msgstr "Gazda" -msgid "Raft layers" -msgstr "Tutaj rétegek" +msgid "Filename" +msgstr "Fájlnév" -msgid "Ramming customization" -msgstr "Tömörítés testreszabása" +msgid "Error Message" +msgstr "Hibaüzenet" -msgid "" -"Ramming denotes the rapid extrusion just before a tool change in a single-" -"extruder MM printer. Its purpose is to properly shape the end of the " -"unloaded filament so it does not prevent insertion of the new filament and " -"can itself be reinserted later. This phase is important and different " -"materials can require different extrusion speeds to get the good shape. For " -"this reason, the extrusion rates during ramming are adjustable.\n" -"\n" -"This is an expert-level setting, incorrect adjustment will likely lead to " -"jams, extruder wheel grinding into filament etc." -msgstr "" -"A tömörítés az egy extruderes Többféle Anyaggal (MM) dolgozó nyomtatókban a " -"szerszámcsere előtti gyors extrudálást jelenti. Célja, hogy megfelelően " -"alakítsa a visszahúzott filament végét, hogy az ne akadályozza az új " -"filament betöltését, és később újra betölthető legyen. Ez a fázis fontos, és " -"a különböző anyagok különböző extrudálási sebességet igényelhetnek a " -"megfelelő forma eléréséhez. Ezért a tömörítés során alkalmazott extrudálási " -"sebességek állíthatóak.\n" -"\n" -"Ez egy szakértői szintű beállítás, a helytelen beállítás elakadásokhoz, az " -"extruder kerék filamentbe marásához stb. vezethet." +msgid "Cancel selected" +msgstr "Kijelöltek törlése" -msgid "Ramming line spacing" -msgstr "Tömörítési vonal térköze" +msgid "Show error message" +msgstr "Hibajelzés megjelenítése" -msgid "Ramming line width" -msgstr "Tömörítési vonal szélessége" +msgid "Enqueued" +msgstr "Beállítva" -msgid "Ramming parameters" -msgstr "Tömörítési paraméterek" +msgid "Uploading" +msgstr "Feltöltés" -msgid "Ramming settings" -msgstr "Tömörítési beállítások" +msgid "Completed" +msgstr "Befejezett" -msgid "Random" -msgstr "Véletlen" +msgid "Error uploading to print host:" +msgstr "Hiba a nyomtatási tárhelyre történő feltöltéskor:" -msgid "Random sequence" -msgstr "Véletlen sorrend" +msgid "NO RAMMING AT ALL" +msgstr "EGYÁLTALÁN NEM ÜTKÖZIK" -msgid "Range" -msgstr "Tartomány" +msgid "Volumetric speed" +msgstr "Térfogati sebesség" -msgid "Rasterizing layers" -msgstr "Rétegek raszterizálása" +msgid "mm³/s" +msgstr "mm³/mp" -msgid "Re&load from Disk" -msgstr "Újratöltés lemezről" +msgid "Save %s as:" +msgstr "Mentés %s mint:" -msgid "Re-configure" -msgstr "Újrakonfigurálás" +msgid "the following suffix is not allowed:" +msgstr "a következő utótag nem megengedett:" -msgid "Ready" -msgstr "Kész" +msgid "The supplied name is not available." +msgstr "A megadott név nem elérhető." -msgid "Rear" -msgstr "Hátul" +msgid "Cannot overwrite a system profile." +msgstr "Nem lehet felülírni egy rendszerprofilt." -msgid "Rear View" -msgstr "Hátulnézet" +msgid "Cannot overwrite an external profile." +msgstr "Nem lehet külső profilt felülírni." -msgid "Recent projects" -msgstr "Legutóbbi projektek" +msgid "Preset with name \"%1%\" already exists." +msgstr "A \"%1%\" nevű előbeállítás már létezik." msgid "" -"Recommended object thin wall thickness: Not available due to excessively " -"small extrusion width." +"Preset with name \"%1%\" already exists and is incompatible with selected " +"printer." msgstr "" -"Az objektum javasolt vékony falvastagsága: Nem elérhető a túl kicsi " -"extrudálási szélesség miatt." - -msgid "Recreating" -msgstr "Újralétrehozás_" +"A \"%1%\" nevű előbeállítás már létezik, és nem kompatibilis a kiválasztott " +"nyomtatóval." -msgid "Rectangular" -msgstr "Négyzetes" +msgid "Note: This preset will be replaced after saving" +msgstr "Megjegyzés: Ez az előbeállítás a mentés után lecserélődik" -msgid "Rectilinear" -msgstr "Egyenesvonalú" +msgid "The name cannot be empty." +msgstr "A név nem lehet üres." -msgid "Rectilinear grid" -msgstr "Egyenesvonalú háló" +msgid "The name cannot start with space character." +msgstr "A név nem kezdődhet szóközzel." -msgid "Redo" -msgstr "Mégis" +msgid "The name cannot end with space character." +msgstr "A név nem végződhet szóközzel." -msgid "Redo %1$d Action" -msgid_plural "Redo %1$d Actions" -msgstr[0] "%1$d Művelet Mégis" -msgstr[1] "%1$d Művelet Mégis" +msgid "Save preset" +msgstr "Előbeállítás mentése" -msgid "Redo History" -msgstr "Előzmények alkalmazása" +msgid "" +"You have selected physical printer \"%1%\" \n" +"with related printer preset \"%2%\"" +msgstr "" +"Ön a \"%1%\" fizikai nyomtatót választotta ki \n" +"a kapcsolódó \"%2%\" nyomtató előbeállítással." -msgid "Reduced overhang slopes" -msgstr "Csökkentett túlnyúlás meredekség" +msgid "What would you like to do with \"%1%\" preset after saving?" +msgstr "Mit szeretne tenni a \"%1%\" előbeállítással a mentés után?" -msgid "Reducing printing time" -msgstr "Nyomtatási idő csökkentése" +msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" +msgstr "Módosítsa a \"%1%\"-ot \"%2%\"-ra a \"%3%\" fizikai nyomtatóhoz." -msgid "Refresh Printers" -msgstr "Nyomtatók Frissítése" +msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" +msgstr "" +"\"%1%\" hozzáadása a \"%2%\" fizikai nyomtató következő előbeállításaként." -msgid "Regular" -msgstr "Általános" +msgid "Just switch to \"%1%\" preset" +msgstr "Csak váltson a \"%1%\" előbeállításra" -msgid "Regular expression" -msgstr "Reguláris kifejezés" +msgid "Stealth" +msgstr "Csendes" -msgid "Release only" -msgstr "Csak normál kiadás" +msgid "Normal" +msgstr "Normál" -msgid "Reload all from disk" -msgstr "Minden újratöltése lemezről" +msgid "Selection-Add" +msgstr "Kiválasztás-Hozzáadása" -msgid "Reload from disk" -msgstr "Újratöltés lemezről" +msgid "Selection-Remove" +msgstr "Kiválasztás-Eltávolítása" -msgid "Reload from:" -msgstr "Újratöltés innen:" +msgid "Selection-Add Object" +msgstr "Kiválasztás-Objektum hozzáadása" -msgid "Reload the plater from disk" -msgstr "Tárgyasztal újratöltése lemezről" +msgid "Selection-Remove Object" +msgstr "Kiválasztás-Objektum törlése" -msgid "Remaining errors" -msgstr "Fennmaradó hibák" +msgid "Selection-Add Instance" +msgstr "Kiválasztás-Példány hozzáadása" -msgid "Remaining time" -msgstr "Hátralévő idő" +msgid "Selection-Remove Instance" +msgstr "Kiválasztás-Példány törlése" -msgid "Remember my choice" -msgstr "Emlékezzen a választásomra" +msgid "Selection-Add All" +msgstr "Kijelölés-Összes hozzáadása" -msgid "Remember output directory" -msgstr "Emlékezzen a kimeneti könyvtárra" +msgid "Selection-Remove All" +msgstr "Kijelölés-Összes törlése" -msgid "Remove" -msgstr "Eltávolítás" +msgid "Scale To Fit" +msgstr "Méretre igazítás" -msgid "remove" -msgstr "eltávolít" +msgid "Set Printable Instance" +msgstr "Nyomtatható példány beállítása" -msgid "Remove all holes" -msgstr "Összes furat eltávolítása" +msgid "Set Unprintable Instance" +msgstr "Nyomtathatatlan példány beállítása" -msgid "Remove all points" -msgstr "Összes pont eltávolítása" +msgid "System Information" +msgstr "Rendszer információ" -msgid "Remove all selection" -msgstr "Az összes kijelölés eltávolítása" +msgid "Copy to Clipboard" +msgstr "Másolás a vágólapra" -msgid "Remove detail" -msgstr "Részlet eltávolítása" +msgid "Compatible printers" +msgstr "Kompatibilis nyomtatók" -msgid "Remove extruder from sequence" -msgstr "Extruder elávolítása a sorozatból" +msgid "Select the printers this profile is compatible with." +msgstr "Válassza ki azokat a nyomtatókat, amelyekkel ez a profil kompatibilis." -msgid "Remove instance" -msgstr "Példány eltávolítása" +msgid "Compatible print profiles" +msgstr "Kompatibilis nyomtatási profilok" -msgid "Remove Instance of the selected object" -msgstr "A kijelölt objektum egy példányának eltávolítása" +msgid "Select the print profiles this profile is compatible with." +msgstr "" +"Válassza ki azokat a nyomtatási profilokat, amelyekkel ez a profil " +"kompatibilis." -msgid "Remove layer range" -msgstr "Rétegtartomány eltávolítása" +msgid "Save current %s" +msgstr "Jelenlegi %s mentése" -msgid "Remove Multi Material painting" -msgstr "Többanyagú festés eltávolítása" +msgid "Delete this preset" +msgstr "Előbeállítás törlése" -msgid "Remove paint-on seam" -msgstr "Felfestett varratok eltávolítása" +msgid "" +"Hover the cursor over buttons to find more information \n" +"or click this button." +msgstr "" +"További információkért vigye a kurzort a gombok fölé \n" +"vagy kattintson erre a gombra." -msgid "Remove paint-on supports" -msgstr "Felfestett támasztékok eltávolítása" +msgid "Search in settings [%1%]" +msgstr "Keresés a beállításokban [%1%]" -msgid "Remove parameter" -msgstr "Paraméter eltávolítása" +msgid "Detach from system preset" +msgstr "Leválasztás a rendszer előre beállított értékéről" -msgid "Remove point" -msgstr "Pont eltávolítása" +msgid "" +"A copy of the current system preset will be created, which will be detached " +"from the system preset." +msgstr "" +"Létrejön az aktuális rendszer-előbeállítás másolata, amely leválik a " +"rendszer-előbeállításról." -msgid "Remove point from selection" -msgstr "Pont eltávolítása kijelölésből" +msgid "" +"The current custom preset will be detached from the parent system preset." +msgstr "" +"Az aktuális egyéni előbeállítás leválik a szülő rendszer előbeállításáról." -msgid "Remove selected holes" -msgstr "Kijelölt furatok eltávolítása" +msgid "Modifications to the current profile will be saved." +msgstr "Az aktuális profil módosításai mentésre kerülnek." -msgid "Remove selected points" -msgstr "Kijelölt pontok eltávolítása" +msgid "" +"This action is not revertable.\n" +"Do you want to proceed?" +msgstr "" +"Ez a művelet nem vonható vissza.\n" +"Szeretné folytatni?" -msgid "Remove selection" -msgstr "Kijelölés eltávolítása" +msgid "Detach preset" +msgstr "Előbeállítás leválasztása" -msgid "Remove user profiles (a snapshot will be taken beforehand)" -msgstr "Felhasználói profilok eltávolítása (előtte pillanatfelvétel készül)" +msgid "This is a default preset." +msgstr "Ez egy alapértelmezett előbeállítás." -msgid "Remove variable layer height" -msgstr "Változó rétegmagasság eltávolítása" +msgid "This is a system preset." +msgstr "Ez egy rendszerbeállítás." -msgid "Rename Object" -msgstr "Objektum átnevezése" +msgid "Current preset is inherited from the default preset." +msgstr "Az aktuális előbeállítás az alapértelmezett előbeállításból öröklődik." -msgid "Rename Sub-object" -msgstr "Al-objektum átnevezése" +msgid "Current preset is inherited from" +msgstr "Az aktuális előbeállítás a" -msgid "Renaming" -msgstr "Átnevezés" +msgid "It can't be deleted or modified." +msgstr "Nem lehet törölni vagy módosítani." msgid "" -"Renaming of the G-code after copying to the selected destination folder has " -"failed. Current path is %1%.tmp. Please try exporting again." +"Any modifications should be saved as a new preset inherited from this one." msgstr "" -"A G-kód átnevezése a kiválasztott célmappába másolás után nem sikerült. A " -"jelenlegi elérési út %1%.tmp. Kérjük, próbálja meg újra az exportálást." +"Minden módosítást egy új, ebből az előbeállításból örökölt új " +"előbeállításként kell elmenteni." -msgid "Render" -msgstr "Renderelés" +msgid "To do that please specify a new name for the preset." +msgstr "Ehhez adjon meg egy új nevet az előbeállításnak." -msgid "Render with a software renderer" -msgstr "Renderelés szoftveres renderelővel" +msgid "Additional information:" +msgstr "További információk:" -msgid "" -"Render with a software renderer. The bundled MESA software renderer is " -"loaded instead of the default OpenGL driver." -msgstr "" -"Renderelés szoftveres renderelővel. A mellékelt MESA szoftveres renderelő " -"töltődik be az alapértelmezett OpenGL-illesztőprogram helyett." +msgid "printer model" +msgstr "nyomtató modell" -msgid "Repair" -msgstr "Javítás" +msgid "default print profile" +msgstr "alapértelmezett nyomtatási profil" -msgid "Repaired 3MF file contains more than one object" -msgstr "A javított 3MF fájl egynél több objektumot tartalmaz" +msgid "default filament profile" +msgstr "alapértelmezett szálprofil" -msgid "Repaired 3MF file contains more than one volume" -msgstr "A javított 3MF fájl egynél több térfogatot tartalmaz" +msgid "default SLA material profile" +msgstr "alapértelmezett SLA anyagprofil" -msgid "Repaired 3MF file does not contain any object" -msgstr "A javított 3MF fájl nem tartalmaz objektumot" +msgid "default SLA print profile" +msgstr "alapértelmezett SLA nyomtatási profil" -msgid "Repaired 3MF file does not contain any volume" -msgstr "A javított 3MF fájl nem tartalmaz térfogatot" +msgid "full profile name" +msgstr "teljes profilnév" -msgid "Repairing model" -msgstr "Modell javítása" +msgid "symbolic profile name" +msgstr "szimbolikus profilnév" -msgid "Repairing model by the Netfabb service" -msgstr "Modell javítása a Netfabb szolgáltatással" +msgid "" +"Single Extruder Multi Material is selected, \n" +"and all extruders must have the same diameter.\n" +"Do you want to change the diameter for all extruders to first extruder " +"nozzle diameter value?" +msgstr "" +"Egyetlen extruder többféle anyag kiválasztása, \n" +"és minden extruder átmérőjének azonosnak kell lennie.\n" +"Szeretné az összes extruder átmérőjét az első extruder fúvókaátmérő értékére " +"módosítani?" -msgid "Repairing was canceled" -msgstr "A javítást vissza lett vonva" +msgid "Nozzle diameter" +msgstr "Fúvóka átmérő" -msgid "Repeat Last Quick Slice" -msgstr "Az Előző Gyors Szeletetelés Megismétlése" +msgid "Help / Details:" +msgstr "Súgó / Részletek:" -msgid "Repeat last quick slice" -msgstr "Az előző gyors szeletetelés megismétlése" +msgid "" +"If the perimeter overlap is set at 100%, the yellow areas should be filled " +"by the overlap.\n" +"If overlap is at 0%, width = spacing." +msgstr "" +"Ha a kerület átfedése 100%-ra van állítva, a sárga területeket az átfedésnek " +"kell kitöltenie.\n" +"Ha az átfedés 0%, akkor a szélesség = távolság." -msgid "Replace from:" -msgstr "Helyettesítés innen:" +msgid "" +"Note: All parameters from this group are moved to the Physical Printer " +"settings (see changelog).\n" +"\n" +"A new Physical Printer profile is created by clicking on the \"cog\" icon " +"right of the Printer profiles combo box, by selecting the \"Add physical " +"printer\" item in the Printer combo box. The Physical Printer profile editor " +"opens also when clicking on the \"cog\" icon in the Printer settings tab. " +"The Physical Printer profiles are being stored into %s/physical_printer " +"directory." +msgstr "" +"Megjegyzés: Az összes paraméter ebből a csoportból átkerül a Fizikai " +"nyomtató beállításaiba (lásd a változásnaplót).\n" +"\n" +"Egy új fizikai nyomtató profil létrehozásához kattintson a nyomtatóprofilok " +"kombinált mezőtől jobbra található \"fogaskerék\" ikonra, a nyomtató " +"kombinált mezőben a \"Fizikai nyomtató hozzáadása\" elem kiválasztásával. A " +"Fizikai nyomtató profilszerkesztő akkor is megnyílik, ha a nyomtató " +"beállításai lapon a \"fogaskerék\" ikonra kattint. A fizikai nyomtató " +"profilok a %s/physical_printer könyvtárban kerülnek tárolásra." -msgid "Replace with" -msgstr "Csere erre" +msgid "Ramming settings" +msgstr "Döngölési beállítások" -msgid "Replace with STL" -msgstr "Helyettesítés STL-lel" +msgid "Extruders" +msgstr "Extruderek" -msgid "Replace?" -msgstr "Lecseréli?" - -msgid "Report an I&ssue" -msgstr "Hibabejelentés" - -msgid "Report an issue on %s" -msgstr "Probléma bejelentése itt: %s" - -msgid "requires max. %s" -msgstr "max. %s szükséges" +msgid "Number of extruders of the printer." +msgstr "A nyomtató extrudereinek száma." -msgid "requires min. %s" -msgstr "min. %s szükséges" +msgid "Milling cutters" +msgstr "Marók" -msgid "requires min. %s and max. %s" -msgstr "min. %s és max. %s szükséges" +msgid "Number of milling heads." +msgstr "A marófejek száma." -msgid "Rescan" -msgstr "Újra keresés" +msgid "" +"This is a single extruder multimaterial printer, diameters of all extruders " +"will be set to the new value. Do you want to proceed?" +msgstr "" +"Ez egy egy extruderes, több anyagból készült nyomtató, az összes extruder " +"átmérője az új értékre lesz beállítva. Szeretné folytatni?" -msgid "Reset" -msgstr "Visszaállítás" +msgid "Reset to Filament Color" +msgstr "Szál színének visszaállítása" -msgid "Reset clipping plane" -msgstr "Vágási sík visszaállítása" +msgid "Filament Overrides" +msgstr "Szál felülbírálások" -msgid "Reset direction" -msgstr "Irány visszaállítása" +msgid "Volumetric flow hints not available" +msgstr "Nem állnak rendelkezésre térfogatáramlási adatok" -msgid "Reset Project" -msgstr "Projekt Újraindítása" +msgid "Machine limits" +msgstr "Gépi korlátok" -msgid "Reset rotation" -msgstr "Forgatás visszaállítása" +msgid "not-marlin/lerdge firmware compensation" +msgstr "not-marlin/lerdge firmware kompenzáció" -msgid "Reset Rotation" -msgstr "Forgatás Visszaállítása" +msgid "Machine Limits" +msgstr "Gépi korlátok" -msgid "Reset scale" -msgstr "Skála visszaállítása" +msgid "Values in this column are for Normal mode" +msgstr "Az ebben az oszlopban szereplő értékek a normál üzemmódra vonatkoznak" -msgid "Reset selection" -msgstr "Kijelölés visszaállítása" +msgid "Values in this column are for Stealth mode" +msgstr "" +"Az ebben az oszlopban szereplő értékek a Lopakodó üzemmódra vonatkoznak" -msgid "Reset to base" -msgstr "Alaphelyzetbe állítás" +msgid "Maximum feedrates" +msgstr "Maximális adagolási sebességek" -msgid "Reset to Filament Color" -msgstr "Filament színének visszaállítása" +msgid "Maximum accelerations" +msgstr "Maximális gyorsulások" -msgid "Restart application" -msgstr "Alkalmazás újraindítása" +msgid "Jerk limits" +msgstr "Rántási korlátok" -msgid "Restore window position on start" -msgstr "Ablak pozíciójának visszaállítása indításkor" +msgid "Minimum feedrates" +msgstr "Minimális adagolási sebességek" -msgid "Retract amount before wipe" -msgstr "Visszahúzott mennyiség törlés előtt" +msgid "Single extruder MM setup" +msgstr "Egy extruder MM beállítása" -msgid "Retract on layer change" -msgstr "Visszahúzás rétegváltáskor" +msgid "Single extruder multimaterial parameters" +msgstr "Egyetlen extruder többanyagú paraméterei" -msgid "Retraction" -msgstr "Visszahúzás" +msgid "Advanced wipe tower purge volume calculs" +msgstr "Fejlett törlőtorony tisztítási térfogat számítások" msgid "" -"Retraction is not triggered when travel moves are shorter than this length." +"The Wipe option is not available when using the Firmware Retraction mode.\n" +"\n" +"Shall I disable it in order to enable Firmware Retraction?" msgstr "" -"A visszahúzás nem lép működésbe, ha az utazási mozgás hossza ennél rövidebb." +"A Törlés opció nem érhető el a Firmware Retraction mód használatakor.\n" +"\n" +"Le kell tiltanom a firmware-visszavonás engedélyezéséhez?" -msgid "Retraction Length" -msgstr "Visszahúzás hossza" +msgid "Firmware Retraction" +msgstr "Firmware visszahúzás" -msgid "Retraction Length (Toolchange)" -msgstr "Visszahúzás Hossza (Szerszámváltás)" +msgid "Detached" +msgstr "Önálló" -msgid "Retraction Speed" -msgstr "Visszahúzási Sebesség" +msgid "remove" +msgstr "eltávolítás" -msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)" +msgid "delete" +msgstr "törlés" + +msgid "It's a last preset for this physical printer." +msgstr "Ez az utolsó előbeállítás ehhez a fizikai nyomtatóhoz." + +msgid "" +"Are you sure you want to delete \"%1%\" preset from the physical printer " +"\"%2%\"?" msgstr "" -"Visszahúzás, ha a szerszám ki van kapcsolva (több extruderes beállítások " -"speciális beállításai)" +"Biztos, hogy törölni szeretné a \"%1%\" előbeállítást a \"%2%\" fizikai " +"nyomtatóról?" -msgid "Retractions" -msgstr "Visszahúzások" +msgid "" +"The physical printer(s) below is based on the preset, you are going to " +"delete." +msgstr "Az alábbi fizikai nyomtató(k) a törlendő előbeállításon alapul(nak)." -msgid "Reverse direction of zoom with mouse wheel" -msgstr "Az egérgörgő zoom irányának megfordítása" +msgid "" +"Note, that selected preset will be deleted from this/those printer(s) too." +msgstr "" +"Vegye figyelembe, hogy a kiválasztott előbeállítások törlődnek a " +"nyomtató(k)ról is." -msgid "Revert color to default" -msgstr "Szín visszaállítása az alapértelmezettre" +msgid "" +"The physical printer(s) below is based only on the preset, you are going to " +"delete." +msgstr "" +"Az alábbi fizikai nyomtató(k) csak a törlendő előbeállításon alapul(nak)." -msgid "Revert conversion from imperial units" -msgstr "Konvertálás visszavonása (angolszász mértékegységről)" +msgid "" +"Note, that this/those printer(s) will be deleted after deleting of the " +"selected preset." +msgstr "" +"Vegye figyelembe, hogy ez/ezek a nyomtató(k) a kiválasztott előbeállítás " +"törlése után törlődnek." -msgid "Revert conversion from meters" -msgstr "Konvertálás visszavonása (metrikus mértékegységről)" +msgid "Are you sure you want to %1% the selected preset?" +msgstr "Biztos, hogy a kiválasztott előbeállítás %1% -át szeretné használni?" -msgid "Review the substitutions and adjust them if needed." -msgstr "Ellenőrizze a helyettesítéseket, és szükség esetén módosítsa azokat." +msgid "%1% Preset" +msgstr "%1% Előbeállítás" -msgid "Right" -msgstr "Jobb" +msgid "Set" +msgstr "Beállít" -msgid "Right button click the icon to change the object printable property" +msgid "" +"Machine limits will be emitted to G-code and used to estimate print time. " +"They are also used as safegard when generating gcode" msgstr "" -"Kattintson jobb gombbal az ikonra az objektum nyomtatható tulajdonságának " -"módosításához" +"A gépi határértékek G-kódba kerülnek, és a nyomtatási idő becslésére " +"szolgálnak. A G-kód generálásakor is használják őket, mint biztonsági " +"biztosítékot" -msgid "Right button click the icon to change the object settings" -msgstr "Kattintson jobb gombbal az ikonra az objektumbeálltások módosításához" +msgid "" +"(even if the acceleration is set to 3000 in the print profile, if this is at " +"1500, it won't export a gcode that will tell to go over 1500)." +msgstr "" +"(még akkor is, ha a gyorsulás 3000-re van állítva a nyomtatási profilban, ha " +"ez 1500-nál van, nem fog olyan G-kódot exportálni, amely azt mondja, hogy " +"1500 fölé menjen)." -msgid "Right button click the icon to fix STL through Netfabb" +msgid "" +"Grey values means that they can't be send to your firmware (no g-code " +"available)." msgstr "" -"Kkattintson jobb gombbal az ikonra az STL Netfabb-on történő javításhoz" +"A szürke értékek azt jelentik, hogy nem küldhetők el a firmware-nek (nem áll " +"rendelkezésre G-kód)." -msgid "Right click" -msgstr "Jobb klikk" +msgid "" +"Machine limits will NOT be emitted to G-code, however they will be used to " +"estimate print time, which may therefore not be accurate as the printer may " +"apply a different set of machine limits. They are also used as safegard when " +"generating gcode" +msgstr "" +"A gépi korlátok NEM kerülnek a G-kódba, azonban a nyomtatási idő becslésére " +"szolgálnak, ami ezért nem biztos, hogy pontos, mivel a nyomtató más gépi " +"korlátokat alkalmazhat. A G-kód generálásakor is biztonságot nyújtanak" -msgid "Right mouse button" -msgstr "Jobb egérgomb" +msgid "Machine limits are used as safegard when generating gcode" +msgstr "A G-kód generálásakor a gépi határokat biztonságként használják" -msgid "Right mouse button:" -msgstr "Jobb egérgomb:" +msgid "Machine limits are disabled. They are not used for anything." +msgstr "A gépi korlátok ki vannak kapcsolva. Nem használják őket semmire." -msgid "Right Preset Value" -msgstr "Jobb Előbeállítás Értéke" +msgid "LOCKED LOCK" +msgstr "LEZÁRT ZÁR" -msgid "Right View" -msgstr "Jobbnézet" +msgid "" +"indicates that the settings are the same as the system (or default) values " +"for the current option group" +msgstr "" +"azt jelzi, hogy a beállítások megegyeznek az aktuális opciócsoport rendszer- " +"(vagy alapértelmezett) értékeivel" -msgid "Rotate" -msgstr "Forgatás" +msgid "UNLOCKED LOCK" +msgstr "FELOLDOTT ZÁR" -msgid "Rotate around X" -msgstr "Forgatás X körül" +msgid "" +"indicates that some settings were changed and are not equal to the system " +"(or default) values for the current option group.\n" +"Click the UNLOCKED LOCK icon to reset all settings for current option group " +"to the system (or default) values." +msgstr "" +"azt jelzi, hogy bizonyos beállítások módosultak, és nem egyenlők az aktuális " +"opciócsoport rendszer- (vagy alapértelmezett) értékeivel.\n" +"Kattintson a FELOLDOTT ZÁR ikonra az aktuális opciócsoport összes " +"beállításának visszaállításához a rendszer (vagy az alapértelmezett) értékre." -msgid "Rotate around Y" -msgstr "Forgatás Y körül" +msgid "WHITE BULLET" +msgstr "FEHÉR GOLYÓ" -msgid "Rotate lower part upwards" -msgstr "Az alsó rész felfelé forgatása" +msgid "" +"for the left button: indicates a non-system (or non-default) preset,\n" +"for the right button: indicates that the settings hasn't been modified." +msgstr "" +"a bal oldali gomb esetében: nem rendszerbeli (vagy nem alapértelmezett) " +"előbeállítást jelez,\n" +"a jobb oldali gomb esetében: azt jelzi, hogy a beállítások nem lettek " +"módosítva." -msgid "Rotate selection 45 degrees CCW" -msgstr "Kijelölés elfordítása 45 fokkal óramutató járásával ellentétesen" +msgid "BACK ARROW" +msgstr "VISSZA NYÍL" -msgid "Rotate selection 45 degrees CW" -msgstr "Kijelölés elfordítása 45 fokkal óramutató járásával megegyezően" +msgid "" +"indicates that the settings were changed and are not equal to the last saved " +"preset for the current option group.\n" +"Click the BACK ARROW icon to reset all settings for the current option group " +"to the last saved preset." +msgstr "" +"azt jelzi, hogy a beállítások megváltoztak, és nem egyeznek meg az aktuális " +"opciós csoport utolsó mentett előbeállításával.\n" +"Kattintson a VISSZA NYÍL ikonra az aktuális opciós csoport összes " +"beállításának visszaállításához az utolsó mentett előbeállításra." -msgid "Rotate the model to have the lowest z height for faster print time." +msgid "" +"LOCKED LOCK icon indicates that the settings are the same as the system (or " +"default) values for the current option group" msgstr "" -"Forgassa úgy a modellt, hogy a Z magasság a legkisebb legyen, a rövidebb " -"nyomtatási idő érdekében." +"LEZÁRT ZÁR ikon azt jelzi, hogy a beállítások megegyeznek a rendszer (vagy " +"alapértelmezett) értékeivel az aktuális opciós csoportra vonatkozóan" -msgid "Rotation" -msgstr "Forgatás" +msgid "" +"UNLOCKED LOCK icon indicates that some settings were changed and are not " +"equal to the system (or default) values for the current option group.\n" +"Click to reset all settings for current option group to the system (or " +"default) values." +msgstr "" +"FELOLDOTT ZÁR ikon azt jelzi, hogy egyes beállítások megváltoztak, és nem " +"egyeznek meg az aktuális opciós csoport rendszer- (vagy alapértelmezett) " +"értékeivel.\n" +"Kattintson a gombra az aktuális opciós csoport összes beállításának a " +"rendszer (vagy alapértelmezett) értékekre történő visszaállításához." -msgid "Rotation angle around the X axis in degrees." -msgstr "Az X tengely körüli forgatási szög fokban." +msgid "WHITE BULLET icon indicates a non system (or non default) preset." +msgstr "" +"A FEHÉR GOLYÓ ikon nem rendszer (vagy nem alapértelmezett) előbeállítást " +"jelez." -msgid "Rotation angle around the Y axis in degrees." -msgstr "Az Y tengely körüli forgatási szög fokban." +msgid "" +"WHITE BULLET icon indicates that the settings are the same as in the last " +"saved preset for the current option group." +msgstr "" +"A FEHÉR GOLYÓ ikon azt jelzi, hogy a beállítások megegyeznek az aktuális " +"opciós csoport utolsó mentett előbeállításával." -msgid "Rotation angle around the Z axis in degrees." -msgstr "Az Z tengely körüli forgatási szög fokban." +msgid "" +"BACK ARROW icon indicates that the settings were changed and are not equal " +"to the last saved preset for the current option group.\n" +"Click to reset all settings for the current option group to the last saved " +"preset." +msgstr "" +"A VISSZA NYÍL ikon azt jelzi, hogy a beállítások megváltoztak, és nem " +"egyeznek meg az aktuális beállításcsoport utolsó mentett előbeállításával.\n" +"Kattintson a gombra az aktuális opciós csoport összes beállításának az " +"utolsó mentett előbeállításra történő visszaállításához." -msgid "Ruler mode" -msgstr "Vonalzó mód" +msgid "" +"LOCKED LOCK icon indicates that the value is the same as the system (or " +"default) value." +msgstr "" +"A LEZÁRT ZÁR ikon azt jelzi, hogy az érték megegyezik a rendszer (vagy " +"alapértelmezett) értékével." -msgid "Run %s" -msgstr "%s Fut_" +msgid "" +"UNLOCKED LOCK icon indicates that the value was changed and is not equal to " +"the system (or default) value.\n" +"Click to reset current value to the system (or default) value." +msgstr "" +"FELOLDOTT ZÁR ikon azt jelzi, hogy az értéket megváltoztatták, és az nem " +"egyenlő a rendszer (vagy alapértelmezett) értékkel.\n" +"Kattintson a gombra az aktuális értéknek a rendszer (vagy alapértelmezett) " +"értékre történő visszaállításához." -msgid "Running post-processing scripts" -msgstr "Utófeldolgozó szkriptek futtatása" +msgid "" +"WHITE BULLET icon indicates that the value is the same as in the last saved " +"preset." +msgstr "" +"A FEHÉR GOLYÓ ikon azt jelzi, hogy az érték megegyezik az utolsó elmentett " +"előbeállítással." -msgid "S&end G-code" -msgstr "G-kód Küldése" +msgid "" +"BACK ARROW icon indicates that the value was changed and is not equal to the " +"last saved preset.\n" +"Click to reset current value to the last saved preset." +msgstr "" +"A VISSZA NYÍL ikon azt jelzi, hogy az értéket megváltoztatták, és az nem " +"egyezik meg az utolsó elmentett előbeállítással.\n" +"Kattintson a gombra az aktuális értéknek az utolsó elmentett előbeállításra " +"történő visszaállításához." -msgid "S&end to print" -msgstr "Nyomtatásra küldés" +msgid "Material" +msgstr "Anyag" -msgid "Same as top" -msgstr "Megegyezik a felsővel" +msgid "Exposure" +msgstr "Expozíció" -msgid "Save" -msgstr "Mentés" +msgid "Corrections" +msgstr "Javítások" -msgid "Save %s as:" -msgstr "Mentés mint %s:" +msgid "Notes" +msgstr "Jegyzetek" -msgid "Save %s file as:" -msgstr "%s fájl mentése másként:" +msgid "Dependencies" +msgstr "Függőségek" -msgid "Save config file" -msgstr "Konfigurációs fájl mentése" +msgid "Profile dependencies" +msgstr "Profilfüggőségek" -msgid "Save configuration as:" -msgstr "Konfiguráció mentése a következőként:" +msgid "Layers and perimeters" +msgstr "Rétegek és kerületek" -msgid "Save configuration to the specified file." -msgstr "A konfiguráció mentése a megadott fájlba." +msgid "Support head" +msgstr "Támasztó fej" -msgid "Save current %s" -msgstr "Aktuális %s mentése" +msgid "Support pillar" +msgstr "Támasztó oszlop" -msgid "Save current project file" -msgstr "Aktuális projekt fájl mentése" +msgid "Connection of the support sticks and junctions" +msgstr "A támasztékok és csomópontok csatlakoztatása" -msgid "Save current project file as" -msgstr "Aktuális projekt fájl mentése másként" +msgid "Automatic generation" +msgstr "Automatikus generálás" -msgid "Save file as:" -msgstr "Fájl mentése mint:" +msgid "Hollowing" +msgstr "Vájat" -msgid "Save G-code file as:" -msgstr "G-kód fájl mentése másként:" +msgid "Output options" +msgstr "Kimeneti opciók" -msgid "Save OBJ file (less prone to coordinate errors than STL) as:" -msgstr "" -"OBJ fájl mentése (kevésbé hajlamos a koordinációs hibákra, mint az STL) a " -"másként:" - -msgid "Save preset" -msgstr "Előbeállítás mentése" - -msgid "Save presets bundle as:" -msgstr "Előbeállítási csomag mentése a következőként:" - -msgid "Save project" -msgstr "Projekt mentése" - -msgid "Save Project &as" -msgstr "Projekt mentése másként" +msgid "Output file" +msgstr "Kimeneti fájl" -msgid "Save project (3mf)" -msgstr "Projekt mentése (3mf)" +msgid "" +"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" +"To enable \"%1%\", please switch off \"%2%\"" +msgstr "" +"\"%1%\" ki van kapcsolva, mert \"%2%\" be van kapcsolva a \"%3%\" " +"kategóriában.\n" +"A \"%1%\" engedélyezéséhez kapcsolja ki a \"%2%\"-ot." -msgid "Save project as (3mf)" -msgstr "Projekt mentése másként (3mf)" +msgid "Object elevation" +msgstr "Objektum magassága" -msgid "Save SL1 / SL1S file as:" -msgstr "SL1 / SL1S fájl mentése másként:" +msgid "Pad around object" +msgstr "Párna körüli tárgy" -msgid "Save support points?" -msgstr "Támasztópontok mentése?" +msgid "Print Settings" +msgstr "Nyomtatás beállításai" -msgid "Save the selected options to preset \"%1%\"." -msgstr "A kiválasztott beállítások mentése a \"%1%\" előbeállításba." +msgid "Filament Settings" +msgstr "Szálbeállítások" -msgid "Save the selected options." -msgstr "A kiválasztott beállítások mentése." +msgid "Printer Settings" +msgstr "Nyomtatóbeállítások" -msgid "Save zip file as:" -msgstr "Zip fájl mentése másként:" +msgid "Material Settings" +msgstr "Anyagbeállítások" -msgid "Saving mesh into the 3MF container failed." -msgstr "A háló mentése a 3MF konténerbe nem sikerült." +msgid "Undef" +msgstr "Definiálatlan" -msgid "Scale" -msgstr "Skálázás" +msgid "%s is closing: Unsaved Changes" +msgstr "%s bezár: Nem mentett változtatások" -msgid "Scale factors" -msgstr "Skálázási tényezők" +msgid "Switching Presets: Unsaved Changes" +msgstr "Előbeállítások váltása: Nem mentett változtatások" -msgid "Scale To Fit" -msgstr "Skálázás mérethez igazítva" +msgid "Old Value" +msgstr "Régi érték" -msgid "Scale to Fit" -msgstr "Skálázás Mérethez Igazítva" +msgid "New Value" +msgstr "Új érték" -msgid "Scale to fit the given volume." -msgstr "A megadott térfogatra való skálázás." +msgid "Transfer" +msgstr "Áthelyezés" -msgid "Scaling factor or percentage." -msgstr "Skálázási tényező vagy százalék." +msgid "%s will remember your action." +msgstr "%s emlékezni fog a műveletére." -msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" +msgid "" +"You will not be asked about the unsaved changes the next time you close %s." msgstr "" -"Feltöltés ütemezése ide: „%1%”. Lásd: Ablak -> Nyomtató-feltöltési " -"várakozási sor" +"A következő bezárásakor nem fog rákérdezni a nem mentett módosításokra %s." -msgid "Seam painting" -msgstr "Varrat festés" +msgid "" +"You will not be asked about the unsaved changes the next time you switch a " +"preset." +msgstr "" +"A következő alkalommal, amikor egy előbeállítást vált, nem fog rákérdezni a " +"nem mentett módosításokra." -msgid "Seam position" -msgstr "Varrat pozíció" +msgid "" +"Visit \"Preferences\" and check \"%1%\"\n" +"to be asked about unsaved changes again." +msgstr "" +"Látogasson el a \"Beállítások\" oldalra, és jelölje be a \"%1%\" " +"lehetőséget\n" +"hogy ismét rákérdezzen a nem mentett módosításokra." -msgid "Seam preferred direction" -msgstr "A varrat preferált iránya" +msgid "" +"Some fields are too long to fit. Right mouse click reveals the full text." +msgstr "" +"Egyes mezők túl hosszúak ahhoz, hogy elférjenek. A jobb egérgombbal " +"megjelenik a teljes szöveg." -msgid "Seam preferred direction jitter" -msgstr "Varrat preferált iránya jitter" +msgid "All settings changes will be discarded." +msgstr "Minden beállítási változtatás elvetésre kerül." -msgid "Seams" -msgstr "Varratok" +msgid "Save the selected options." +msgstr "A kiválasztott opciók mentése." -msgid "Searc&h" -msgstr "Keresés" +msgid "Transfer the selected settings to the newly selected preset." +msgstr "" +"A kiválasztott beállítások átvitele az újonnan kiválasztott előbeállításba." -msgid "Search" -msgstr "Keresés" +msgid "Save the selected options to preset \"%1%\"." +msgstr "A kiválasztott beállítások mentése a \"%1%\" előbeállításba." -msgid "Search in English" -msgstr "Keresés Angolul" +msgid "Transfer the selected options to the newly selected preset \"%1%\"." +msgstr "" +"A kiválasztott beállítások átvitele az újonnan kiválasztott \"%1%\" " +"előbeállításba." -msgid "Search in settings" -msgstr "Keresés a beállításokban" +msgid "The following presets were modified:" +msgstr "A következő előbeállítások módosultak:" -msgid "Search in settings [%1%]" -msgstr "Keresés a beállításokban [%1%]" +msgid "Preset \"%1%\" has the following unsaved changes:" +msgstr "" +"A \"%1%\" előbeállítás a következő mentetlen módosításokkal rendelkezik:" -msgid "Searching for devices" -msgstr "Eszközök keresése" +msgid "" +"Preset \"%1%\" is not compatible with the new printer profile and it has the " +"following unsaved changes:" +msgstr "" +"A \"%1%\" előbeállítás nem kompatibilis az új nyomtatóprofillal, és a " +"következő mentetlen módosításokat tartalmazza:" -msgid "Searching for optimal orientation" -msgstr "Az optimális tájolás keresése" +msgid "" +"Preset \"%1%\" is not compatible with the new print profile and it has the " +"following unsaved changes:" +msgstr "" +"A \"%1%\" előbeállítás nem kompatibilis az új nyomtatási profillal, és a " +"következő mentetlen módosításokat tartalmazza:" -msgid "See Download page." -msgstr "Tekintse meg a Letöltési oldalt." +msgid "Extruders count" +msgstr "Extruderek száma" -msgid "See more." -msgstr "Továbbiak megjelenítése." +msgid "Capabilities" +msgstr "Kapacitások" -msgid "See Releases page." -msgstr "Tekintse meg a kiadások oldalt." +msgid "Old value" +msgstr "Régi érték" -msgid "Select a file" -msgstr "Válasszon egy fájlt" +msgid "New value" +msgstr "Új érték" -msgid "Select a gcode file:" -msgstr "Válasszon egy gcode fájlt:" +msgid "Update available" +msgstr "Frissítés elérhető" -msgid "Select all objects" -msgstr "Összes objektum kijelölése" +msgid "New version of %s is available" +msgstr "A %s új verziója elérhető" -msgid "Select all points" -msgstr "Összes pont kijelölése" +msgid "Current version:" +msgstr "Jelenlegi verzió:" -msgid "Select an action to apply to the file" -msgstr "Válassza ki a fájlra alkalmazandó műveletet" +msgid "New version:" +msgstr "Új verzió:" -msgid "Select by rectangle" -msgstr "Kijelölés téglalappal" +msgid "Changelog && Download" +msgstr "Változásnapló && Letöltések" -msgid "Select configuration to load:" -msgstr "A Betöltendő konfiguráció kiválasztása:" +msgid "Open changelog page" +msgstr "Változásnapló oldal megnyitása" -msgid "Select coordinate space, in which the transformation will be performed." -msgstr "" -"Válassza ki azt a koordináta rendszert, amelyben a transzformáció " -"végrehajtását szeretné." +msgid "Open download page" +msgstr "Letöltési oldal megnyitása" -msgid "Select Filament Settings Tab" -msgstr "Filament Beállítások Fül Kiválasztása" +msgid "Don't notify about new releases any more" +msgstr "Többé nem értesít az új kiadásokról" -msgid "Select presets to compare" -msgstr "Előbeállítások kiválasztása az összehasonlításhoz" +msgid "Opening Configuration Wizard" +msgstr "Konfigurációs varázsló megnyitása" -msgid "Select Print Settings Tab" -msgstr "Nyomtatási Beállítások Fül Kiválasztása" +msgid "Configuration update" +msgstr "Konfiguráció frissítés" -msgid "Select Printer Settings Tab" -msgstr "Nyomtató Beállítások Fül Kiválasztása" +msgid "" +"%s is not using the newest configuration available.\n" +"Configuration Wizard may not offer the latest printers, filaments and SLA " +"materials to be installed. " +msgstr "" +"%s nem a legújabb elérhető konfigurációt használja.\n" +"A Konfigurációs varázsló nem biztos, hogy a legújabb nyomtatókat, szálakat " +"és SLA anyagokat kínálja fel a telepítéshez. " -msgid "Select the language" -msgstr "Válassza ki a nyelvet" +msgid "Configuration update is available" +msgstr "A konfiguráció frissítése elérhető" -msgid "Select the new file" -msgstr "Válassza ki az új fájlt" +msgid "" +"Would you like to install it?\n" +"\n" +"Note that a full configuration snapshot will be created first. It can then " +"be restored at any time should there be a problem with the new version.\n" +"\n" +"Updated configuration bundles:" +msgstr "" +"Szeretné telepíteni?\n" +"\n" +"Vegye figyelembe, hogy először egy teljes konfigurációs pillanatkép jön " +"létre. Ez aztán bármikor visszaállítható, ha az új verzióval probléma " +"merülne fel.\n" +"\n" +"Frissített konfigurációs csomagok:" -msgid "Select the print profiles this profile is compatible with." -msgstr "Válassza ki az ezzel a profillal kompatibilis nyomtatási profilokat." +msgid "Comment:" +msgstr "Megjegyzés:" -msgid "Select the printers this profile is compatible with." -msgstr "Válassza ki az ezzel a profillal kompatibilis nyomtatókat." +msgid "Install" +msgstr "Telepítés" -msgid "Select the STL file to repair:" -msgstr "Válassza ki a javítandó STL fájlt:" +msgid "Don't install" +msgstr "Ne telepítse" -msgid "Select toolbar icon size in respect to the default one." -msgstr "" -"Válassza ki az eszköztár ikonjainak méretét az alapértelmezetthez képest." +msgid "%s incompatibility" +msgstr "%s inkompatibilitás" -msgid "Select type of part" -msgstr "Válassza ki az alkatrész típusát" +msgid "You must install a configuration update." +msgstr "Telepítenie kell egy konfigurációs frissítést." msgid "" -"Select YES if you want to delete all saved tool changes, \n" -"NO if you want all tool changes switch to color changes, \n" -"or CANCEL to leave it unchanged." +"%s will now start updates. Otherwise it won't be able to start.\n" +"\n" +"Note that a full configuration snapshot will be created first. It can then " +"be restored at any time should there be a problem with the new version.\n" +"\n" +"Updated configuration bundles:" msgstr "" -"Válassza az IGEN lehetőséget, ha törölni kívánja az összes mentett " -"eszközváltást, \n" -"NEM, ha azt szeretné, hogy az összes szerszámváltás színváltásra váltson, \n" -"vagy a VISSZAVONÁS lehetőséget, ha változatlanul szeretné hagyni." - -msgid "Selection-Add" -msgstr "Kiválasztás - Hozzáadás" +"%s most elindítja a frissítéseket. Ellenkező esetben nem fog tudni " +"elindulni.\n" +"\n" +"Vegye figyelembe, hogy először egy teljes konfigurációs pillanatkép jön " +"létre. Ez aztán bármikor visszaállítható, ha probléma merülne fel az új " +"verzióval.\n" +"\n" +"Frissített konfigurációs csomagok:" -msgid "Selection-Add All" -msgstr "Kiválasztás - Összes hozzáadása" +msgid "Exit %s" +msgstr "Kilépés %s" -msgid "Selection-Add from list" -msgstr "Kijelölés - hozzáadás listából" +msgid "%s configuration is incompatible" +msgstr "%s konfiguráció nem kompatibilis" -msgid "Selection-Add from rectangle" -msgstr "Kijelölés – Hozzáadás a téglalaphoz" +msgid "" +"This version of %s is not compatible with currently installed configuration " +"bundles.\n" +"This probably happened as a result of running an older %s after using a " +"newer one.\n" +"\n" +"You may either exit %s and try again with a newer version, or you may re-run " +"the initial configuration. Doing so will create a backup snapshot of the " +"existing configuration before installing files compatible with this %s." +msgstr "" +"A %s ezen verziója nem kompatibilis a jelenleg telepített konfigurációs " +"csomagokkal.\n" +"Ez valószínűleg egy régebbi %s futtatása miatt történt, miután egy újabbat " +"használt.\n" +"\n" +"Vagy kiléphet a %s-ből, és megpróbálhatja újra egy újabb verzióval, vagy " +"újra lefuttathatja az eredeti konfigurációt. Ezzel egy biztonsági mentést " +"készít a meglévő konfigurációról, mielőtt telepítené az ezzel a %s-szel " +"kompatibilis fájlokat." -msgid "Selection-Add Instance" -msgstr "Kiválasztás - Példány hozzáadása" +msgid "This %s version: %s" +msgstr "A %s verzió: %s" -msgid "Selection-Add Object" -msgstr "Kiválasztás - Objektum hozzáadása" +msgid "Incompatible bundles:" +msgstr "Nem kompatibilis csomagok:" -msgid "Selection-Remove" -msgstr "Kiválasztás - Törlés" +msgid "Re-configure" +msgstr "Újrakonfigurálás" -msgid "Selection-Remove All" -msgstr "Kiválasztás - Összes törlése" +msgid "" +"%s now uses an updated configuration structure.\n" +"\n" +"So called 'System presets' have been introduced, which hold the built-in " +"default settings for various printers. These System presets cannot be " +"modified, instead, users now may create their own presets inheriting " +"settings from one of the System presets.\n" +"An inheriting preset may either inherit a particular value from its parent " +"or override it with a customized value.\n" +"\n" +"Please proceed with the %s that follows to set up the new presets and to " +"choose whether to enable automatic preset updates." +msgstr "" +"%s mostantól frissített konfigurációs struktúrát használ.\n" +"\n" +"Bevezetésre kerültek az úgynevezett \"rendszer-előbeállítások\", amelyek a " +"különböző nyomtatók beépített alapértelmezett beállításait tartalmazzák. " +"Ezek a rendszer-előbeállítások nem módosíthatók, ehelyett a felhasználók " +"mostantól létrehozhatják saját előbeállításaikat, amelyek a rendszer-" +"előbeállítások valamelyikének beállításait öröklik.\n" +"Egy öröklődő előbeállítás örökölhet egy adott értéket a szülőjétől, vagy " +"felülírhatja azt egy testreszabott értékkel.\n" +"\n" +"Az új előbeállítások beállításához, valamint annak kiválasztásához, hogy " +"engedélyezni kívánja-e az automatikus előbeállítás-frissítéseket, kérjük, " +"folytassa a következő %s lépéseket." -msgid "Selection-Remove from list" -msgstr "Kijelölés - törlés listából" +msgid "For more information please visit Prusa wiki page:" +msgstr "További információkért látogasson el a Prusa wiki oldalára:" -msgid "Selection-Remove from rectangle" -msgstr "Kijelölés – Eltávolítás a téglalapból" +msgid "Configuration updates" +msgstr "Konfigurációs frissítések" -msgid "Selection-Remove Instance" -msgstr "Kiválasztás - Példány törlése" +msgid "No updates available" +msgstr "Nincsenek frissítések" -msgid "Selection-Remove Object" -msgstr "Kiválasztás - Objektum törlése" +msgid "%s has no configuration updates available." +msgstr "%s nem rendelkezik konfigurációs frissítésekkel." -msgid "Selects all objects" -msgstr "Az összes objektum kijelölése" +msgid "Ramming customization" +msgstr "Rammelés testreszabása" -msgid "Send G-code" -msgstr "G-kód küldése" +msgid "" +"Ramming denotes the rapid extrusion just before a tool change in a single-" +"extruder MM printer. Its purpose is to properly shape the end of the " +"unloaded filament so it does not prevent insertion of the new filament and " +"can itself be reinserted later. This phase is important and different " +"materials can require different extrusion speeds to get the good shape. For " +"this reason, the extrusion rates during ramming are adjustable.\n" +"\n" +"This is an expert-level setting, incorrect adjustment will likely lead to " +"jams, extruder wheel grinding into filament etc." +msgstr "" +"Az egy extruderes MM-nyomtatóban a szerszámcsere előtti gyors extrudálást " +"jelenti. Célja, hogy megfelelően alakítsa a kitöltetlen szál végét, hogy az " +"ne akadályozza az új szál behelyezését, és később újra behelyezhető legyen. " +"Ez a fázis fontos, és a különböző anyagok különböző extrudálási sebességet " +"igényelhetnek a megfelelő forma eléréséhez. Ezért a tömörítés során az " +"extrudálási sebességek állíthatóak.\n" +"\n" +"Ez egy szakértői szintű beállítás, a helytelen beállítás valószínűleg " +"elakadásokhoz, az extruder kerék filamentbe csiszolásához stb. vezet." -msgid "Send G-Code to printer host" -msgstr "G-kód küldése a nyomtató gazdagépének" +msgid "Total ramming time" +msgstr "Teljes betömési idő" -msgid "Send to print current plate as G-code" -msgstr "Az aktuális tárgyasztal küldése nyomtatóra G-kódként" +msgid "Total rammed volume" +msgstr "Teljes tömörített térfogat" -msgid "Send to printer" -msgstr "Küldés nyomtatóra" +msgid "Ramming line width" +msgstr "Tömörítési vonal szélessége" -msgid "Seq." -msgstr "Seq." +msgid "Ramming line spacing" +msgstr "Távolság a roppantósoron" -msgid "Sequential printing" -msgstr "Szekvenciális nyomtatás" +msgid "Wipe tower - Purging volume adjustment" +msgstr "Törlőtorony - Tisztítási mennyiség beállítása" -msgid "Sequential slider applied only to top layer" -msgstr "Szekvenciális csúszka csak a legfelső rétegre alkalmazva" +msgid "" +"Here you can adjust required purging volume (mm³) for any given pair of " +"tools." +msgstr "" +"Itt állíthatja be a szükséges öblítési térfogatot (mm³) bármely adott " +"szerszámpárhoz." -msgid "Serial port:" -msgstr "Soros port:" +msgid "Extruder changed to" +msgstr "Cserélt extruder" -msgid "Service name" -msgstr "Szolgáltatás neve" +msgid "unloaded" +msgstr "kiadott" -msgid "Set" -msgstr "Beállítás" +msgid "loaded" +msgstr "betöltött" -msgid "Set auto color changes" -msgstr "Automatikus színváltás beállítása" +msgid "Tool #" +msgstr "Szerszám #" -msgid "Set default extruder for the selected items" -msgstr "Alapértelmezett extruder beállítása a kiválasztott elemekhez" +msgid "" +"Total purging volume is calculated by summing two values below, depending on " +"which tools are loaded/unloaded." +msgstr "" +"A teljes tisztítási térfogatot az alábbi két érték összegzésével kell " +"kiszámítani, attól függően, hogy mely szerszámok vannak betöltve és kiadva." -msgid "Set extruder change for every" -msgstr "Extruder sorrend beállítás az összesre" +msgid "Volume to purge (mm³) when the filament is being" +msgstr "Tisztítandó térfogat (mm³), amikor az izzószálat" -msgid "Set extruder number for the selected items" -msgstr "Extruder számának beállítása a kiválasztott elemekhez" +msgid "From" +msgstr "Tól,-től" -msgid "Set extruder sequence" -msgstr "Extruder sorrend beállítás" +msgid "" +"Switching to simple settings will discard changes done in the advanced " +"mode!\n" +"\n" +"Do you want to proceed?" +msgstr "" +"Az egyszerű beállításokra váltás elveti a haladó módban végzett " +"változtatásokat!\n" +"\n" +"Akarod folytatni?" -msgid "Set extruder sequence for the entire print" -msgstr "Extruder sorrend beállítása a teljes nyomtatáshoz" +msgid "Show simplified settings" +msgstr "Egyszerűsített beállítások megjelenítése" -msgid "Set extruder(tool) sequence" -msgstr "Extruder (szerszám) sorrend beállítása" +msgid "Show advanced settings" +msgstr "Speciális beállítások megjelenítése" -msgid "Set left thumb as active" -msgstr "Bal jelölő beállítása aktívként" +msgid "Switch to the %s mode" +msgstr "Váltás a %s üzemmódra" -msgid "Set lower thumb as active" -msgstr "Alsó jelölő aktiválása" +msgid "Current mode is %s" +msgstr "Aktuális üzemmód %s" -msgid "Set Mirror" -msgstr "Tükrözés beállítása" +msgid "Mismatched type of print host: %s" +msgstr "A nyomtatóállomás típusa nem egyezik meg: %s" -msgid "Set numbers of copies to %d" -msgstr "A másolatok számának beállítása erre: %d" +msgid "Could not connect to %s" +msgstr "Nem tudott csatlakozni %s" -msgid "Set Orientation" -msgstr "Tájolás Beállítása" +msgid "Note: AstroBox version at least 1.1.0 is required." +msgstr "Megjegyzés: Az AstroBox legalább 1.1.0-s verziója szükséges." -msgid "Set Position" -msgstr "Helyzet Beállítása" +msgid "Unknown error occured" +msgstr "Ismeretlen hiba történt" -msgid "Set Printable" -msgstr "Beálltás nyomtathatónak" +msgid "Wrong password" +msgstr "Rossz jelszó" -msgid "Set Printable group" -msgstr "Csoport beállítása nyomtathatónak" +msgid "Could not get resources to create a new connection" +msgstr "Nem tudott erőforrásokat szerezni egy új kapcsolat létrehozásához" -msgid "Set Printable Instance" -msgstr "Példány beállítása nyomtathatónak" +msgid "Exporting source model" +msgstr "Forrásmodell exportálása" -msgid "Set right thumb as active" -msgstr "Jobb jelölő beállítása aktívként" +msgid "Failed loading the input model." +msgstr "Sikertelenül töltötte be a bemeneti modellt." -msgid "Set ruler mode" -msgstr "Vonalzó mód beállítása" +msgid "Repairing model by the Netfabb service" +msgstr "Modell javítása a Netfabb szolgáltatással" -msgid "Set Scale" -msgstr "Skálázás Beállítása" +msgid "Mesh repair failed." +msgstr "A hálójavítás nem sikerült." -msgid "Set selected items as Printable/Unprintable" -msgstr "A kiválasztott elemek beállítása nyomtatható/nem nyomtathatóként" +msgid "Loading repaired model" +msgstr "Javított modell betöltése" -msgid "Set settings tabs as menu items (experimental)" -msgstr "Beállítások fülsáv megjelenítése menüelemként (kísérleti)" +msgid "Saving mesh into the 3MF container failed." +msgstr "A háló mentése a 3MF konténerbe nem sikerült." -msgid "" -"Set the actual LCD display orientation inside the SLA printer. Portrait mode " -"will flip the meaning of display width and height parameters and the output " -"images will be rotated by 90 degrees." -msgstr "" -"Állítsa be az LCD-kijelző tényleges tájolását az SLA nyomtatóban. A portré " -"mód megfordítja a kijelző szélességi és magassági paramétereinek jelentését, " -"és a kimeneti képek 90 fokkal el lesznek forgatva." +msgid "Model fixing" +msgstr "Modell rögzítés" -msgid "Set the shape of your printer's bed." -msgstr "Állítsa be a nyomtató tárgyasztalának alakját." +msgid "Exporting model" +msgstr "Modell exportálása" -msgid "" -"Set this to the maximum height that can be reached by your extruder while " -"printing." -msgstr "" -"Állítsa ezt a maximális magasságra, amelyet az extruder nyomtatás közben " -"elérhet." +msgid "Export of a temporary 3mf file failed" +msgstr "Az ideiglenes 3mf fájl exportálása sikertelen" -msgid "" -"Set this to the vertical distance between your nozzle tip and (usually) the " -"X carriage rods. In other words, this is the height of the clearance " -"cylinder around your extruder, and it represents the maximum depth the " -"extruder can peek before colliding with other printed objects." -msgstr "" -"Állítsa be ezt az értéket a fúvókacsúcs és (általában) az X kocsirudak " -"közötti függőleges távolságra. Más szóval, ez az extruder körüli védőhenger " -"magassága, és ez jelenti azt a maximális mélységet, amelyre az extruder még " -"le tud süllyedni, mielőtt a már kinyomtatott objektumokkal ütközne." +msgid "Import of the repaired 3mf file failed" +msgstr "A javított 3mf fájl importálása nem sikerült" -msgid "Set Unprintable" -msgstr "Beálltás nem nyomtathatónak" +msgid "Repaired 3MF file does not contain any object" +msgstr "A javított 3MF fájl nem tartalmaz objektumot" -msgid "Set Unprintable group" -msgstr "Csoport beállítása nem nyomtathatónak" +msgid "Repaired 3MF file contains more than one object" +msgstr "A javított 3MF fájl egynél több objektumot tartalmaz" -msgid "Set Unprintable Instance" -msgstr "Példány beállítása nem nyomtathatónak" +msgid "Repaired 3MF file does not contain any volume" +msgstr "A javított 3MF fájl nem tartalmaz kötetet" -msgid "Set upper thumb as active" -msgstr "Felső jelölő aktiválása" +msgid "Repaired 3MF file contains more than one volume" +msgstr "A javított 3MF fájl egynél több kötetet tartalmaz" -msgid "" -"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" -"trace\n" -"For example. loglevel=2 logs fatal, error and warning level messages." -msgstr "" -"Naplózási érzékenység beállítása. 0: végzetes, 1: hiba, 2: figyelmeztetés, " -"3: információ, 4: hibakeresés, 5: nyomkövetés.\n" -"Például: loglevel=2 a végzetes, hiba és figyelmeztetés szintű üzeneteket " -"naplózza." +msgid "Model repair finished" +msgstr "Modelljavítás befejezve" -msgid "Settings" -msgstr "Beállítások" +msgid "Model repair canceled" +msgstr "Modelljavítás törölve" -msgid "Settings for height range" -msgstr "Magasságtartomány beállítások" +msgid "Model repaired successfully" +msgstr "Modell sikeresen javítva" -msgid "Settings in non-modal window" -msgstr "Beálltások külön ablakban" +msgid "Model Repair by the Netfabb service" +msgstr "Modelljavítás a Netfabb szolgáltatással" -msgid "Shall I adjust those settings for supports?" -msgstr "Módosítsam ezeket a beállításokat a támaszokhoz?" +msgid "Model repair failed:" +msgstr "Modelljavítás sikertelen:" -msgid "Shall I adjust those settings in order to enable Spiral Vase?" -msgstr "Módosítsam ezeket a beállításokat a Spirálváza engedélyezéséhez?" +msgid "Upload not enabled on FlashAir card." +msgstr "A FlashAir kártyán nincs engedélyezve a feltöltés." -msgid "Shall I adjust those settings in order to enable the Wipe Tower?" -msgstr "Módosítsam ezeket a beállításokat a törlőtorony engedélyezéséhez?" +msgid "" +"Note: FlashAir with firmware 2.00.02 or newer and activated upload function " +"is required." +msgstr "" +"Megjegyzés: 2.00.02 vagy újabb firmware-rel és aktivált feltöltési " +"funkcióval rendelkező FlashAir szükséges." -msgid "Shall I switch to rectilinear fill pattern?" -msgstr "Váltsak egyenes vonalú kitöltési mintára?" +msgid "" +"Could not detect system SSL certificate store. The slicer will be unable to " +"establish secure network connections." +msgstr "" +"Nem sikerült felismerni a rendszer SSL-tanúsítványtárolóját. A szeletelő nem " +"tud biztonságos hálózati kapcsolatot létrehozni." -msgid "Shall I synchronize support layers in order to enable the Wipe Tower?" -msgstr "Szinkronizáljam a támasz rétegeket a Törlőtorony engedélyezéséhez?" +msgid "The slicer detected system SSL certificate store in: %1%" +msgstr "" +"A szeletelő észlelte a rendszer SSL tanúsítványtárolóját a következő helyen: " +"%1%" -msgid "Shape" -msgstr "Alakzat" +msgid "" +"To specify the system certificate store manually, please set the %1% " +"environment variable to the correct CA bundle and restart the application." +msgstr "" +"A rendszer tanúsítványtárolójának manuális megadásához állítsa a %1% " +"környezeti változót a megfelelő hitelesítésszolgáltatói csomagra, és indítsa " +"újra az alkalmazást." -msgid "Shape Gallery" -msgstr "Alakzat Galéria" +msgid "" +"CURL init has failed. The slicer will be unable to establish network " +"connections. See logs for additional details." +msgstr "" +"A CURL init sikertelen. A szeletelő nem tud hálózati kapcsolatot létrehozni. " +"További részletekért lásd a naplófájlokat." -msgid "Shells" -msgstr "Héjak" +msgid "Note: OctoPrint version at least 1.1.0 is required." +msgstr "Megjegyzés: Az OctoPrint legalább 1.1.0-s verziója szükséges." -msgid "Shift + Left mouse button" -msgstr "Shift + Bal egérgomb" +msgid "Connection to %s works correctly." +msgstr "A %s kapcsolat helyesen működik." -msgid "Shift + Left mouse button:" -msgstr "Shift + Bal egérgomb:" +msgid "Could not connect to Prusa SLA" +msgstr "Nem tudott csatlakozni a Prusa SLA-hoz" -msgid "Shift + Right mouse button:" -msgstr "Shift + Jobb egérgomb:" +msgid "Connection to PrusaLink works correctly." +msgstr "A PrusaLinkhez való csatlakozás megfelelően működik." -msgid "Shift objects to bed" -msgstr "Tárgyak tárgyasztalba helyezése" +msgid "Could not connect to PrusaLink" +msgstr "Nem tudott csatlakozni a PrusaLinkhez" -msgid "Show" -msgstr "Megjelenítés" +msgid "Copying of file %1% to %2% failed: %3%" +msgstr "A %1% fájl másolása %2%-ra nem sikerült: %3%" -msgid "Show &Configuration Folder" -msgstr "Konfigurációs Mappa Megjelenítése" +msgid "Continue and install configuration updates?" +msgstr "Folytassa és telepítse a konfigurációs frissítéseket?" -msgid "Show &Labels" -msgstr "Címkék Mutatása" +msgid "requires min. %s and max. %s" +msgstr "min. %s és max. %s értéket igényel" -msgid "Show \"Tip of the day\" notification after start" -msgstr "A „Nap tippje” értesítés megjelenítése a program indításakor" +msgid "requires min. %s" +msgstr "min. %s szükséges" -msgid "Show about dialog" -msgstr "A Szerzőről szóló párbeszédpanel megnyitása" +msgid "requires max. %s" +msgstr "max. %s szükséges" -msgid "Show advanced settings" -msgstr "Haladó beállítások megjelenítése" +msgid "Open G-code file:" +msgstr "G-kód fájl megnyitása:" -msgid "Show all presets (including incompatible)" -msgstr "Minden előbeállítás megjelenítése (beleértve az inkompatibiliseket is)" +msgid "Can't process the repetier return message: missing field '%s'" +msgstr "" +"Nem lehet feldolgozni az ismétlődő visszatérési üzenetet: hiányzik a '%s' " +"mező" -msgid "Show drop project dialog" -msgstr "Húz és ejt párbeszédpanel megjelenítése" +msgid "Note: Repetier version at least 0.90.0 is required." +msgstr "Megjegyzés: Repetier legalább 0.90.0 verzió szükséges." -msgid "Show error message" -msgstr "Hibaüzenet megjelenítése" +msgid "" +"HTTP status: %1%\n" +"Message body: \"%2%\"" +msgstr "" +"HTTP állapot: %1%\n" +"Üzenet teste: \"%2%\"" -msgid "Show estimated print time" -msgstr "Becsült nyomtatási idő megjelenítése" +msgid "" +"Parsing of host response failed.\n" +"Message body: \"%1%\"\n" +"Error: \"%2%\"" +msgstr "" +"Az állomás válaszának elemzése sikertelen.\n" +"Üzenet teste: \"%1%\"\n" +"Hiba: \"%2%\"" -msgid "Show estimated print time on the ruler" -msgstr "Becsült nyomtatási idő megjelenítése a vonalzón" +msgid "" +"Enumeration of host printers failed.\n" +"Message body: \"%1%\"\n" +"Error: \"%2%\"" +msgstr "" +"Az állomásnyomtatók felsorolása sikertelen volt.\n" +"Üzenet teste: \"%1%\"\n" +"Hiba: \"%2%\"" -msgid "Show incompatible print and filament presets" -msgstr "Nem kompatibilis nyomtatási és filament előbeállítások megjelenítése" +msgid "Mixed" +msgstr "Kevert" -msgid "Show keyboard shortcuts list" -msgstr "A billentyűparancsok listájának megjelenítése" +msgid "Perimeter" +msgstr "Kerület" -msgid "Show normal mode" -msgstr "Normál mód mutatása" +msgid "There is an object with no extrusions on the first layer." +msgstr "" +"Az első rétegben van egy olyan objektum, amelynek nincsenek kitüremkedései." -msgid "Show object height" -msgstr "Objektum magasságának megjelenítése" +msgid "Empty layers detected, the output would not be printable." +msgstr "Ha üres rétegeket észlel, a kimenet nem lesz nyomtatható." -msgid "Show object height on the ruler" -msgstr "Objektum magasságának megjelenítése a vonalzón" +msgid "Print z" +msgstr "Nyomtatás z" -msgid "Show object/instance labels in 3D scene" -msgstr "Objektum/példánycímkék megjelenítése 3D-s jelenetben" +msgid "" +"This is usually caused by negligibly small extrusions or by a faulty model. " +"Try to repair the model or change its orientation on the bed." +msgstr "" +"Ezt általában elhanyagolhatóan kis extrudálások vagy hibás modell okozza. " +"Próbálja meg kijavítani a modellt, vagy változtassa meg a modell tájolását " +"az ágyon." -msgid "Show sidebar collapse/expand button" -msgstr "Az oldalsáv összecsukás/kibontás gombjának megjelenítése" +msgid "Gcode done" +msgstr "G-kód kész" -msgid "Show simplified settings" -msgstr "Egyszerű beállítások megjelenítése" +msgid "No extrusions were generated for objects." +msgstr "Az objektumokhoz nem generáltak kitüremkedéseket." -msgid "Show splash screen" -msgstr "Splash screen meglenítése" - -msgid "Show stealth mode" -msgstr "Lopakodó mód mutatása" - -msgid "Show supports" -msgstr "Támasztékok mutatása" - -msgid "Show system information" -msgstr "Rendszerinformáció mutatása" +msgid "" +"Your print is very close to the priming regions. Make sure there is no " +"collision." +msgstr "" +"A lenyomata nagyon közel van az alapozó régiókhoz. Győződjön meg róla, hogy " +"nincs ütközés." -msgid "Show the filament settings" -msgstr "Filament beállítások mutatása" +msgid "Generating G-code layer %s / %s" +msgstr "G-kód réteg generálása %s / %s" -msgid "Show the full list of print/G-code configuration options." +msgid "" +"Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." msgstr "" -"A nyomtatási/G-kód konfigurációs lehetőségek teljes listájának megjelenítése." +"Nem lehet kiszámítani a %1% extrudálási szélességet: %2%\" változó nem " +"elérhető." -msgid "Show the full list of SLA print configuration options." -msgstr "" -"Az SLA nyomtatási konfigurációs beállítások teljes listájának megjelenítése." +msgid "undefined error" +msgstr "definiálatlan hiba" -msgid "Show the list of the keyboard shortcuts" -msgstr "A billentyűparancsok listájának megjelenítése" +msgid "too many files" +msgstr "túl sok fájl" -msgid "Show the print settings" -msgstr "Nyomtatási beállítások mutatása" +msgid "file too large" +msgstr "túl nagy fájl" -msgid "Show the printer settings" -msgstr "Nyomtató beállítások mutatása" +msgid "unsupported method" +msgstr "nem támogatott eljárás" -msgid "Show this help." -msgstr "Ennek a súgónak a megjelenítése." +msgid "unsupported encryption" +msgstr "nem támogatott titkosítás" -msgid "Show Tip of the Day" -msgstr "Nap Tippje Mutatása" +msgid "unsupported feature" +msgstr "nem támogatott funkció" -msgid "Show user configuration folder (datadir)" -msgstr "Konfigurációs Mappa Megjelenítése (datadir)" +msgid "failed finding central directory" +msgstr "nem sikerült megtalálni a központi könyvtárat" -msgid "Show/Hide 3Dconnexion devices settings dialog" -msgstr "" -"3Dconnexion eszközök beállításai párbeszédpanel megjelenítése/elrejtése" +msgid "not a ZIP archive" +msgstr "nem ZIP archívum" -msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" -msgstr "" -"3Dconnexion eszközök beállításai párbeszédpanel megjelenítése/elrejtése, ha " -"engedélyezve van" +msgid "invalid header or archive is corrupted" +msgstr "érvénytelen fejléc vagy az archívum sérült" -msgid "Show/Hide G-code window" -msgstr "G-kód ablak megjelenítése/elrejtése" +msgid "unsupported multidisk archive" +msgstr "nem támogatott többlemezes archívum" -msgid "Show/Hide Legend and Estimated printing time" -msgstr "Jelmagyarázat és becsült nyomtatási idő megjelenítése/elrejtése" +msgid "decompression failed or archive is corrupted" +msgstr "a dekompresszió sikertelen vagy az archívum sérült" -msgid "Show/Hide object/instance labels" -msgstr "Objektum/példánycímkék megjelenítése/elrejtése" +msgid "compression failed" +msgstr "tömörítés sikertelen" -msgid "Simple mode" -msgstr "Egyszerű mód" +msgid "unexpected decompressed size" +msgstr "váratlan dekomprimált méret" -msgid "Single extruder MM setup" -msgstr "Egy extruders MM beállítása" +msgid "CRC-32 check failed" +msgstr "CRC-32 ellenőrzés sikertelen" -msgid "Single Extruder Multi Material" -msgstr "Egyetlen Extruder Többféle Anyag" +msgid "unsupported central directory size" +msgstr "nem támogatott központi könyvtár méret" -msgid "" -"Single Extruder Multi Material is selected, \n" -"and all extruders must have the same diameter.\n" -"Do you want to change the diameter for all extruders to first extruder " -"nozzle diameter value?" -msgstr "" -"Egyetlen Extruder Többféle Anyag van kiválasztva, \n" -"ezért minden extruder átmérőjének azonosnak kell lennie.\n" -"Szeretné az összes extruder fúvókaátmérőjét az első extruderéhez igazítani?" +msgid "allocation failed" +msgstr "allokáció sikertelen" -msgid "Single extruder multimaterial parameters" -msgstr "Egyetlen extruder többanyagú paraméterei" +msgid "file open failed" +msgstr "fájl megnyitása sikertelen" -msgid "Single instance mode" -msgstr "Egypéldányos mód" +msgid "file create failed" +msgstr "fájl létrehozása sikertelen" -msgid "Sinking" -msgstr "Süllyedés" +msgid "file write failed" +msgstr "fájl írása sikertelen" -msgid "Size" -msgstr "Méret" +msgid "file read failed" +msgstr "fájl olvasása sikertelen" -msgid "Size and coordinates" -msgstr "Méret és koordináták" +msgid "file close failed" +msgstr "fájl bezárása sikertelen" -msgid "Size in X and Y of the rectangular plate." -msgstr "A téglalap alakú lemez X és Y mérete." +msgid "file seek failed" +msgstr "fájlkeresés sikertelen" -msgid "Skirt" -msgstr "Szoknya" +msgid "file stat failed" +msgstr "fájl statisztika sikertelen" -msgid "Skirt and brim" -msgstr "Szoknya és karima" +msgid "invalid parameter" +msgstr "érvénytelen paraméter" -msgid "Skirt height" -msgstr "Szoknya magasság" +msgid "invalid filename" +msgstr "érvénytelen fájlnév" -msgid "Skirt Loops" -msgstr "Szoknya Hurkok" +msgid "buffer too small" +msgstr "túl kicsi puffer" -msgid "Skirt/Brim" -msgstr "Szoknya/Karima" +msgid "internal error" +msgstr "belső hiba" -msgid "SLA gizmo keyboard shortcuts" -msgstr "SLA gizmo gyorsbillentyűk" +msgid "file not found" +msgstr "fájl nem található" -msgid "SLA material" -msgstr "SLA anyag" +msgid "archive is too large" +msgstr "túl nagy az archívum" -msgid "SLA Material Profiles Selection" -msgstr "SLA Alapanyag Profilok Kiválasztása" +msgid "validation failed" +msgstr "érvényesítés sikertelen" -msgid "SLA material type" -msgstr "SLA anyag típus" +msgid "write calledback failed" +msgstr "visszaírás sikertelen" -msgid "SLA materials" -msgstr "SLA anyagok" +msgid "filament" +msgstr "nyomtatószál" -msgid "SLA Materials" -msgstr "SLA Anyagok" +msgid "All objects are outside of the print volume." +msgstr "Minden objektum a nyomtatási térfogaton kívül van." -msgid "SLA print" -msgstr "SLA nyomtatás" +msgid "The supplied settings will cause an empty print." +msgstr "A megadott beállítások üres nyomtatást eredményeznek." -msgid "SLA print material notes" -msgstr "SLA anyag megjegyzések" +msgid "Some objects are too close; your extruder will collide with them." +msgstr "Néhány objektum túl közel van; az extruder ütközni fog velük." -msgid "SLA print settings" -msgstr "SLA nyomtatási beállítások" +msgid "" +"Some objects are too tall and cannot be printed without extruder collisions." +msgstr "" +"Egyes objektumok túl magasak, és nem nyomtathatók extruder-ütközések nélkül." -msgid "SLA Support Points" -msgstr "SLA Támasztópontok" +msgid "" +"Only a single object may be printed at a time in Spiral Vase mode. Either " +"remove all but the last object, or enable sequential mode by " +"\"complete_objects\"." +msgstr "" +"Spirálváza módban egyszerre csak egyetlen tárgy nyomtatható. Vagy távolítsa " +"el az összes objektumot az utolsó kivételével, vagy engedélyezze a " +"szekvenciális módot a „complete_objects” paraméterrel." -msgid "SLA supports outside the print area were detected." -msgstr "SLA támaszték található a nyomtatási területen kívül." +msgid "" +"The Spiral Vase option can only be used when printing single material " +"objects." +msgstr "" +"A Spirálváza opció csak egyedi anyagú objektumok nyomtatásához használható." msgid "" -"Slic3r can upload G-code files to a printer host. This field must contain " -"the kind of the host." +"The wipe tower is only supported if all extruders have the same nozzle " +"diameter and use filaments of the same diameter." msgstr "" -"A Slic3r képes G-kód fájlokat feltölteni egy nyomtató-gazdára. Ennek a " -"mezőnek tartalmaznia kell a gazda típusát." +"A törlőtorony csak akkor támogatott, ha minden extrudernek azonos a fúvóka " +"átmérője, és azonos átmérőjű filamenteket használnak." msgid "" -"Slic3r can upload G-code files to a printer host. This field should contain " -"the API Key or the password required for authentication." +"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " +"and Repetier G-code flavors." msgstr "" -"A Slic3r képes G-kód fájlokat feltölteni egy nyomtatógazdára. Ennek a " -"mezőnek tartalmaznia kell az API-kulcsot vagy a hitelesítéshez szükséges " -"jelszót." +"A Wipe Tower jelenleg csak a Marlin, RepRap/Sprinter és Repetier G-kódos " +"szoftverekhez támogatott." msgid "" -"Slic3r can upload G-code files to a printer host. This field should contain " -"the hostname, IP address or URL of the printer host instance. Print host " -"behind HAProxy with basic auth enabled can be accessed by putting the user " -"name and password into the URL in the following format: https://username:" -"password@your-octopi-address/" +"The Wipe Tower is currently only supported with the relative extruder " +"addressing (use_relative_e_distances=1)." msgstr "" -"A Slic3r képes G-kód fájlokat feltölteni egy nyomtatógazdára. Ennek a " -"mezőnek tartalmaznia kell a nyomtatógazda példányának gazdanevét, IP-címét " -"vagy URL-címét. A HAProxy mögött lévő nyomtatógazda alapszintű hozzáférés " -"engedélyezése esetén az URL-címbe a felhasználónév és a jelszó beírásával " -"érhető el a következő formátumban: https://username:password@your-octopi-" -"address/" +"A Wipe Tower jelenleg csak a relatív extruder-címzéssel támogatott " +"(use_relative_e_distances=1)." -msgid "Slice" -msgstr "Szeletelés_" +msgid "Ooze prevention is currently not supported with the wipe tower enabled." +msgstr "" +"A szivárgás elleni védelem jelenleg nem támogatott, ha a törlőtorony " +"engedélyezett." -msgid "Slice a file into a G-code" -msgstr "Fájl szeletelése G-kódba" +msgid "" +"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." +msgstr "" +"A Wipe Tower jelenleg nem támogatja a volumetrikus E-t (use_volumetric_e=0)." -msgid "Slice a file into a G-code, save as" -msgstr "Fájl szeletelése G-kódba, mentés másként" +msgid "" +"The Wipe Tower is currently not supported for multimaterial sequential " +"prints." +msgstr "" +"A Wipe Tower jelenleg nem támogatott többanyagú szekvenciális nyomatokhoz." -msgid "Slice gap closing radius" -msgstr "Szelet hézagzárási sugara" +msgid "" +"The Wipe Tower is only supported for multiple objects if they have equal " +"layer heights" +msgstr "" +"A Wipe Tower csak akkor támogatott több objektum esetén, ha azonos " +"rétegmagasságúak" -msgid "Slice now" -msgstr "Szeletelés most" +msgid "" +"The Wipe Tower is only supported for multiple objects if they are printed " +"over an equal number of raft layers" +msgstr "" +"A Wipe Tower csak akkor támogatott több objektum esetén, ha azokat azonos " +"számú tutajrétegre nyomtatják" -msgid "Slice resolution" -msgstr "Szelet felbontása" +msgid "" +"The Wipe Tower is only supported for multiple objects if they are printed " +"with the same support_material_contact_distance" +msgstr "" +"A Wipe Tower csak akkor támogatott több objektum esetén, ha ugyanazzal a " +"support_material_contact_distance-vel vannak kinyomtatva" -msgid "Slice the model and export SLA printing layers as PNG." +msgid "" +"The Wipe Tower is only supported for multiple objects if they are sliced " +"equally." msgstr "" -"Szeletelje fel a modellt és exportálja az SLA nyomtatási rétegeket PNG " -"formátumban." +"A Wipe Tower csak akkor támogatott több objektum esetén, ha azok egyenlően " +"vannak felszeletelve." -msgid "Slice the model and export toolpaths as G-code." -msgstr "Szeletelje a modellt és exportálja a szerszámpályákat G-kódként." +msgid "" +"The Wipe tower is only supported if all objects have the same variable layer " +"height" +msgstr "" +"A törlőtorony csak akkor támogatott, ha minden objektum azonos változó " +"rétegmagassággal rendelkezik" msgid "" -"Slice the model as FFF or SLA based on the printer_technology configuration " -"value." +"One or more object were assigned an extruder that the printer does not have." msgstr "" -"A modell szeletelése FFF-, vagy SLA-ként a printer_technology konfigurációs " -"érték alapján." +"Egy vagy több objektumhoz olyan extrudert rendeltek, amely nem rendelkezik a " +"nyomtatóval." -msgid "Sliced Info" -msgstr "Szeletelt Info" +msgid "" +"Printing with multiple extruders of differing nozzle diameters. If support " +"is to be printed with the current extruder (support_material_extruder == 0 " +"or support_material_interface_extruder == 0), all nozzles have to be of the " +"same diameter." +msgstr "" +"Nyomtatás többféle, különböző fúvókaátmérőjű extruderrel. Ha a támasztékot " +"az aktuális extruderrel kell nyomtatni (support_material_extruder == 0 vagy " +"support_material_interface_extruder == 0), minden fúvókának azonos " +"átmérőjűnek kell lennie." -msgid "Sliced object \"%1%\" looks like a logo or a sign" +msgid "" +"For the Wipe Tower to work with the soluble supports, the support layers " +"need to be synchronized with the object layers." msgstr "" -"A \"%1%\" szeletelt objektum úgy néz ki, mint egy logó vagy egy felirat" +"Ahhoz, hogy a Wipe Tower működjön az oldható támasztékokkal, a " +"tartórétegeket szinkronizálni kell az objektumrétegekkel." -msgid "Slicing" -msgstr "Szeletelés" +msgid "" +"The Wipe Tower currently supports the non-soluble supports only if they are " +"printed with the current extruder without triggering a tool change. (both " +"support_material_extruder and support_material_interface_extruder need to be " +"set to 0)." +msgstr "" +"A Wipe Tower jelenleg csak akkor támogatja a nem oldódó támasztékokat, ha " +"azokat az aktuális extruderrel nyomtatják, szerszámcsere nélkül. (mind a " +"support_material_extruder, mind a support_material_interface_extruder " +"értéket 0-ra kell állítani)." -msgid "Slicing complete" -msgstr "Szeletelés elkészült" +msgid "Min layer height can't be greater than Max layer height" +msgstr "" +"A minimális rétegmagasság nem lehet nagyobb, mint a maximális rétegmagasság" -msgid "Slicing done" -msgstr "Szeletelés kész" +msgid "Max layer height can't be greater than nozzle diameter" +msgstr "A maximális rétegmagasság nem lehet nagyobb, mint a fúvóka átmérője" -msgid "Slicing Done!" -msgstr "Szeletelés Kész!" +msgid "First layer height can't be thinner than %s" +msgstr "Az első réteg magassága nem lehet vékonyabb, mint %s" -msgid "Slicing finished." -msgstr "Szeletelés kész." +msgid "First layer height can't be greater than %s" +msgstr "Az első réteg magassága nem lehet nagyobb, mint %s" -msgid "" -"Slicing had to be stopped due to an internal error: Inconsistent slice index." -msgstr "" -"A szeletelést belső hiba miatt le kellett állítani: Inkonzisztens szelet " -"index." +msgid "Layer height can't be higher than %s" +msgstr "A réteg magassága nem lehet magasabb, mint %s" -msgid "Slicing Mode" -msgstr "Szeletelési mód" +msgid "Layer height can't be greater than %s" +msgstr "A réteg magassága nem lehet nagyobb, mint %s" -msgid "Slicing model" -msgstr "Modell szeletelése" +msgid "Infilling layers" +msgstr "Kitöltő rétegek" -msgid "Slicing supports" -msgstr "Támasztók szeletelése" +msgid "Generating skirt" +msgstr "Szoknyát generál" -msgid "Slow" -msgstr "Lassú" +msgid "Generating brim" +msgstr "Peremet generál" -msgid "Slow down if layer print time is below" -msgstr "Lassítson, ha a rétegnyomtatási idő a következő idő alatt van" +msgid "Slicing done" +msgstr "Szeletelés kész" -msgid "Slow tilt" -msgstr "Lassú billentés" +msgid "Exporting G-code" +msgstr "G-kód exportálása" -msgid "Small pillar diameter percent" -msgstr "Kis pillér átmérője százalék" +msgid "Generating G-code" +msgstr "G-kód generálása" -msgid "Smart fill" -msgstr "Okos kitöltés" +msgid "Failed processing of the output_filename_format template." +msgstr "Az output_filename_format sablon feldolgozása sikertelen." -msgid "Smart fill angle" -msgstr "Okos kitöltés szög" +msgid "Printer technology" +msgstr "Nyomtató technológia" -msgid "Smooth" -msgstr "Sima" - -msgid "Smoothing" -msgstr "Simítás" +msgid "Bed shape" +msgstr "Ágy alakja" -msgid "Snapshot name" -msgstr "Pillanatkép neve" +msgid "Bed custom texture" +msgstr "Ágy egyedi textúra" -msgid "Snug" -msgstr "Simulékony" +msgid "Bed custom model" +msgstr "Ágy egyedi modell" -msgid "Solid" -msgstr "Félkövér" +msgid "Thumbnails size" +msgstr "Miniatűrök mérete" -msgid "Solid " -msgstr "Félkövér " +msgid "" +"Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " +"following format: \"XxY, XxY, ...\"" +msgstr "" +"A képméreteket .gcode és .sl1 / .sl1s fájlokban kell tárolni, a következő " +"formátumban: \"XxY, XxY, ...\"." -msgid "Solid infill" -msgstr "Tömör kitöltés" +msgid "Thumbnail color" +msgstr "Miniatűr színe" -msgid "solid infill" -msgstr "tömör kitöltés" +msgid "This is the color that will be enforced on objects in the thumbnails." +msgstr "" +"Ez az a szín, amely a miniatűrökben lévő objektumokon érvényesülni fog." -msgid "Solid infill every" -msgstr "Tömör kitöltés minden" +msgid "Enforce thumbnail color" +msgstr "Miniatűrök színének kikényszerítése" -msgid "Solid infill extruder" -msgstr "Tömör kitöltés extruder" +msgid "" +"Enforce a specific color on thumbnails. If not enforced, their color will be " +"the one defined by the filament." +msgstr "" +"Egy adott szín érvényre juttatása a miniatűrökön. Ha nincs érvényesítve, " +"akkor a színük a szál által meghatározott szín lesz." -msgid "Solid infill threshold area" -msgstr "Tömör kitöltés küszöbérték" +msgid "Print at the end" +msgstr "Nyomtatás a végén" -msgid "Solid layers" -msgstr "Tömör rétegek" +msgid "" +"Print the thumbnail code at the end of the gcode file instead of the front.\n" +"Be careful! Most firmwares expect it at the front, so be sure that your " +"firmware support it." +msgstr "" +"A miniatűr kódot a G-kód fájl eleje helyett a végén nyomtatja ki.\n" +"Legyen óvatos! A legtöbb firmware az elején várja el, ezért győződjön meg " +"róla, hogy a firmware támogatja." -msgid "Soluble material" -msgstr "Oldható anyag" +msgid "Bed on thumbnail" +msgstr "Ágy a miniatűrön" -msgid "Soluble material is most likely used for a soluble support." -msgstr "Az oldható anyagot általában oldható hordozóként használják." +msgid "Show the bed texture on the thumbnail picture." +msgstr "Mutasd meg az ágy textúráját a miniatűr képen." -msgid "" -"Some fields are too long to fit. Right mouse click reveals the full text." -msgstr "" -"Néhány mező túl hosszú ahhoz, hogy elférjen. A jobb egérgombbal történő " -"kattintással a teljes szöveg megjelenik." +msgid "Support on thumbnail" +msgstr "Támogatás a miniatűrökön" -msgid "Some filaments were uninstalled." -msgstr "Néhány filament eltávolításra került." +msgid "Show the supports (and pads) on the thumbnail picture." +msgstr "Mutassa meg a támaszokat (és a párnákat) a miniatűr képen." -msgid "Some objects are not visible during editing." -msgstr "Egyes objektumok nem láthatók szerkesztés közben." +msgid "Base Layer height" +msgstr "Alapréteg magassága" -msgid "Some objects are too close; your extruder will collide with them." +msgid "" +"This setting controls the height (and thus the total number) of the slices/" +"layers. Thinner layers give better accuracy but take more time to print." msgstr "" -"Néhány objektum túl közel van egymáshoz; az extruder ütközni fog velük." +"Ez a beállítás szabályozza a szeletek/rétegek magasságát (és így a teljes " +"számot). A vékonyabb rétegek nagyobb pontosságot adnak, de több időt vesz " +"igénybe a nyomtatás." + +msgid "Max print height" +msgstr "Max nyomtatási magasság" msgid "" -"Some objects are too tall and cannot be printed without extruder collisions." +"Set this to the maximum height that can be reached by your extruder while " +"printing." msgstr "" -"Néhány objektum túl magas, ezért nem nyomtathatók ki az extruder ütközése " -"nélkül." +"Állítsa be ezt a maximális magasságot, amelyet az extruder nyomtatás közben " +"elérhet." + +msgid "Slice gap closing radius" +msgstr "Szeletrés záró sugara" msgid "" -"Some objects can get along with a few smaller pads instead of a single big " -"one. This parameter defines how far the center of two smaller pads should " -"be. If theyare closer, they will get merged into one pad." +"Fill cracks smaller than 2x gap closing radius during the triangle mesh " +"slicing. The gap closing operation may reduce the final print resolution, " +"therefore it is advisable to keep the value reasonably low." msgstr "" -"Egyes objektumok egyetlen nagy párna helyett néhány kisebb párnával is " -"beérik. Ez a paraméter határozza meg, hogy a két kisebb párna középpontja " -"milyen messze legyen egymástól. Ha ennél közelebb vannak egymáshoz, akkor " -"egy párnává olvadnak össze." +"A háromszögháló szeletelése során a rés 2x-es zárási sugaránál kisebb " +"repedések kitöltése. A részárási művelet csökkentheti a végső nyomtatási " +"felbontást, ezért célszerű az értéket ésszerűen alacsonyan tartani." + +msgid "Hostname, IP or URL" +msgstr "Gazdanév, IP vagy URL" msgid "" -"Some presets are modified and the unsaved changes will not be captured by " -"the configuration snapshot." +"Slic3r can upload G-code files to a printer host. This field should contain " +"the hostname, IP address or URL of the printer host instance. Print host " +"behind HAProxy with basic auth enabled can be accessed by putting the user " +"name and password into the URL in the following format: https://username:" +"password@your-octopi-address/" msgstr "" -"Néhány előbeállítás módosult, és a nem mentett változásokat a konfigurációs " -"pillanatkép nem rögzíti." +"A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek " +"tartalmaznia kell a gazdagép példányának hostnevét, IP-címét vagy URL-címét. " +"A HAProxy mögött lévő nyomtatógazda alapszintű auth engedélyezéssel érhető " +"el, ha a felhasználónevet és a jelszót a következő formátumban írja be az " +"URL-be: https://username:password@your-octopi-address/" + +msgid "API Key / Password" +msgstr "API Kulcs / Jelszó" msgid "" -"Some presets are modified and the unsaved changes will not be exported into " -"configuration bundle." +"Slic3r can upload G-code files to a printer host. This field should contain " +"the API Key or the password required for authentication." msgstr "" -"Egyes előre beállított értékek módosultak, és a nem mentett módosítások nem " -"kerülnek exportálásra a konfigurációs csomagba." +"A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek " +"tartalmaznia kell az API-kulcsot vagy a hitelesítéshez szükséges jelszót." + +msgid "Name of the printer" +msgstr "A nyomtató neve" msgid "" -"Some printers or printer setups may have difficulties printing with a " -"variable layer height. Enabled by default." +"Custom CA certificate file can be specified for HTTPS OctoPrint connections, " +"in crt/pem format. If left blank, the default OS CA certificate repository " +"is used." msgstr "" -"Egyes nyomtatók vagy nyomtatóbeállítások nehézségekbe ütközhetnek a változó " -"rétegmagasságú nyomtatásnál. Alapértelmezés szerint engedélyezett." +"Egyedi hitelesítésszolgáltatói tanúsítványfájl adható meg a HTTPS OctoPrint " +"kapcsolatokhoz, crt/pem formátumban. Ha üresen hagyja, akkor az " +"alapértelmezett operációs rendszer hitelesítésszolgáltatói tanúsítványtárat " +"használja." -msgid "Some Printers were uninstalled." -msgstr "Néhány nyomtató eltávolításra került." +msgid "Password" +msgstr "Jelszó" -msgid "Some SLA materials were uninstalled." -msgstr "Néhány SLA anyag eltávolításra került." +msgid "Printer preset name" +msgstr "Nyomtató előre beállított neve" -msgid "Spacing" -msgstr "Térköz" +msgid "Related printer preset name" +msgstr "Kapcsolódó nyomtató előbeállítás neve" -msgid "Spacing between interface lines. Set zero to get a solid interface." -msgstr "" -"Térköz az interfész vonalai között. HA nullára állítja, akkor összefüggő " -"interfészt kap." +msgid "Authorization Type" +msgstr "Engedélyezés típusa" -msgid "Spacing between support material lines." -msgstr "Térköz a támaszanyag vonalai között." +msgid "API key" +msgstr "API kulcs" -msgid "Speed" -msgstr "Sebesség" +msgid "HTTP digest" +msgstr "HTTP kivonat" -msgid "Speed (mm/s)" -msgstr "Sebesség (mm/s)" +msgid "Allow empty layers" +msgstr "Üres rétegek engedélyezése" msgid "" -"Speed for movements along the Z axis.\n" -"When set to zero, the value is ignored and regular travel speed is used " -"instead." +"Prevent the gcode builder from triggering an exception if a full layer is " +"empty, and allow the print to start from thin air afterward." msgstr "" -"A Z tengely mentén történő mozgások sebessége.\n" -"Ha nullára van állítva, akkor az értéket figyelmen kívül hagyjuk, és " -"helyette a normál utazási sebességet használjuk." +"Megakadályozza, hogy a G-kód builder kivételt indítson, ha egy teljes réteg " +"üres, és lehetővé teszi, hogy a nyomtatás utána a levegőből induljon." -msgid "Speed for non-print moves" -msgstr "Sebesség nem nyomtatási mozgásokhoz" +msgid "Avoid crossing perimeters" +msgstr "Kerülje a határok átlépését" -msgid "Speed for print moves" -msgstr "Sebesség nyomtatási mozgásokhoz" +msgid "" +"Optimize travel moves in order to minimize the crossing of perimeters. This " +"is mostly useful with Bowden extruders which suffer from oozing. This " +"feature slows down both the print and the G-code generation." +msgstr "" +"Optimalizálja az utazási mozgásokat, hogy minimalizálja a peremterületek " +"keresztezését. Ez főként a szivárgástól szenvedő Bowden extrudereknél " +"hasznos. Ez a funkció lelassítja mind a nyomtatást, mind a G-kód generálását." -msgid "Speed for travel moves (jumps between distant extrusion points)." +msgid "Don't avoid crossing on 1st layer" +msgstr "Ne kerülje el a keresztezést az 1. rétegnél" + +msgid "Disable 'Avoid crossing perimeters' for the first layer." msgstr "" -"Az utazási mozgások sebessége (távoli extrudálási pontok közötti ugrások)." +"Kapcsolja ki a 'Kerülje a határok keresztezését' opciót az első rétegnél." -msgid "Speed of the first cooling move" -msgstr "Az első hűtési lépés sebessége" +msgid "Avoid crossing perimeters - Max detour length" +msgstr "Kerülje a határkerületek keresztezését - Maximális kerülőút hossza" -msgid "Speed of the last cooling move" -msgstr "Az utolsó hűtési lépés sebessége" +msgid "" +"The maximum detour length for avoid crossing perimeters. If the detour is " +"longer than this value, avoid crossing perimeters is not applied for this " +"travel path. Detour length can be specified either as an absolute value or " +"as percentage (for example 50%) of a direct travel path." +msgstr "" +"A kerülőút maximális hossza a keresztezési határok elkerülése érdekében. Ha " +"a kerülőút hosszabb ennél az értéknél, akkor a kerülőút nem kerül " +"alkalmazásra erre az útvonalra. A kerülőút hossza megadható abszolút " +"értékként vagy a közvetlen haladási útvonal százalékában (például 50%)." -msgid "Speed used at the very beginning of loading phase. " -msgstr "A betöltési fázis legelején használt sebesség. " +msgid "mm or % (zero to disable)" +msgstr "mm vagy % (nulla letiltja)" -msgid "Speed used for loading the filament on the wipe tower. " -msgstr "A filament törlőtoronyra való betöltéséhez használt sebesség. " +msgid "Other layers" +msgstr "Egyéb rétegek" msgid "" -"Speed used for unloading the filament on the wipe tower (does not affect " -"initial part of unloading just after ramming). " -msgstr "A filament törlőtoronynál való kiürítéséhez használt sebesség (nem befolyásolja a kiürítés kezdeti részét közvetlenül a tömörítés után). " +"Bed temperature for layers after the first one. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Ágyhőmérséklet a rétegek számára az első után. A nulla beállításával " +"letilthatja az ágyhőmérséklet-szabályozó parancsokat a kimeneten." -msgid "" -"Speed used for unloading the tip of the filament immediately after ramming. " -msgstr "A filament kiürítésének sebessége közvetlenül a tömörítés után. " +msgid "Bed temperature" +msgstr "Ágy hőmérséklet" -msgid "Speed:" -msgstr "Sebesség:" +msgid "Before layer change G-code" +msgstr "Rétegváltás előtt G-kód" -msgid "Sphere" -msgstr "Gömb" +msgid "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as {layer_num} and {layer_z}." +msgstr "" +"Ez az egyéni kód minden rétegváltáskor, közvetlenül a Z elmozdulás előtt " +"kerül beillesztésre. Vegye figyelembe, hogy helyőrző változókat használhat " +"az összes Slic3r-beállításhoz, valamint a {layer_num} és {layer_z} " +"értékekhez." -msgid "Spiral Vase" -msgstr "Spirál Váza" +msgid "Between objects G-code" +msgstr "Objektumok közötti G-kód" -msgid "Spiral vase" -msgstr "Spirál váza" +msgid "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S{first_layer_temperature}\" command wherever you want." +msgstr "" +"Ez a kód a szekvenciális nyomtatás használatakor az objektumok közé kerül. " +"Alapértelmezés szerint az extruder és az ágy hőmérséklete a nem várakozó " +"parancs segítségével visszaáll; azonban ha az M104, M109, M140 vagy M190 " +"kódot észleli ez az egyéni kód, a Slic3r nem ad hozzá hőmérséklet-" +"parancsokat. Vegye figyelembe, hogy minden Slic3r-beállításhoz használhat " +"helyőrző változókat, így bárhová beírhat egy \"M109 " +"S{first_layer_temperature}\" parancsot." -msgid "Split" -msgstr "Felbontás" +msgid "Number of solid layers to generate on bottom surfaces." +msgstr "Az alsó felületeken létrehozandó szilárd rétegek száma." -msgid "Split to objects" -msgstr "Objektumokra bontás" +msgid "Bottom solid layers" +msgstr "Alsó szilárd rétegek" -msgid "Split to Objects" -msgstr "Objektumokra Osztás" +msgid "" +"The number of bottom solid layers is increased above bottom_solid_layers if " +"necessary to satisfy minimum thickness of bottom shell." +msgstr "" +"Az alsó szilárd rétegek számát a bottom_solid_layers felett növelni kell, ha " +"szükséges az alsó héj minimális vastagságának teljesítéséhez." -msgid "Split to parts" -msgstr "Alkatrészekre bontás" +msgid "Minimum bottom shell thickness" +msgstr "Minimális alsó héjvastagság" -msgid "Split to Parts" -msgstr "Alkatrészekre bontás" +msgid "Bridge" +msgstr "Híd" -msgid "Split triangles" -msgstr "Háromszögek felosztása" +msgid "Bridge acceleration" +msgstr "Híd gyorsulás" -msgid "Splits bigger facets into smaller ones while the object is painted." -msgstr "Az objektum festése közben a nagyobb felületeket kisebbekre osztja." +msgid "" +"This is the acceleration your printer will use for bridges.\n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for bridges.\n" +"Note that it won't be applied to overhangs, they still use the perimeter " +"acceleration." +msgstr "" +"Ez az a gyorsítás, amelyet a nyomtató a hidakhoz használ.\n" +"Lehet az alapértelmezett gyorsítás %-ában\n" +"A nulla beállításával a hidak gyorsításvezérlése kikapcsolható.\n" +"Ne feledje, hogy a túlnyúlásokra nem lesz alkalmazva, azok továbbra is a " +"kerületi gyorsulást használják." -msgid "Spool weight" -msgstr "A spulni súlya" +msgid "mm/s² or %" +msgstr "mm/mp² vagy %" -msgid "Stack overflow" -msgstr "Verem túlcsordulás" +msgid "Bridging" +msgstr "Áthidalás" -msgid "Standard" -msgstr "Standard" +msgid "Bridging angle" +msgstr "Áthidaló szög" -msgid "Stars" -msgstr "Csillagok" +msgid "" +"Bridging angle override. If left to zero, the bridging angle will be " +"calculated automatically. Otherwise the provided angle will be used for all " +"bridges. Use 180° for zero angle." +msgstr "" +"Az áthidaló szög felülírása. Ha nullára hagyja, az áthidaló szög " +"automatikusan kiszámításra kerül. Ellenkező esetben a megadott szöget fogja " +"használni az összes hídnál. Használjon 180°-ot a nulla szöghez." -msgid "Start a new project" -msgstr "Új projekt elkezdése" +msgid "Bridges fan speed" +msgstr "Hidak hűtési sebessége" -msgid "Start at height" -msgstr "Kezdés ebben a magasságban" +msgid "" +"This fan speed is enforced during bridges and overhangs. It won't slow down " +"the fan if it's currently running at a higher speed.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Ez a ventilátorsebesség hidak és túlnyúlások során érvényesül. Nem lassítja " +"le a ventilátort, ha éppen nagyobb sebességgel működik.\n" +"A felülírás letiltásához állítsa -1-re.\n" +"Csak a disable_fan_first_layers által felülírható." -msgid "Start G-code" -msgstr "G-kód kezdete" +msgid "Infill bridges fan speed" +msgstr "Híd kitöltés hűtési sebessége" -msgid "Start new slicing process" -msgstr "Új szeletelés indítása" +msgid "" +"This fan speed is enforced during all infill bridges. It won't slow down the " +"fan if it's currently running at a higher speed.\n" +"Set to 1 to follow default speed.\n" +"Set to -1 to disable this override (internal bridges will use Bridges fan " +"speed).\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Ez a ventilátor fordulatszám minden hídkitöltésnél érvényesül. Nem lassítja " +"le a ventilátort, ha az éppen gyorsabban megy.\n" +"Az alapértelmezett sebesség követéséhez állítsa 1-re.\n" +"Állítsa -1-re, hogy letiltsa ezt a felülbírálást (a belső hidak " +"ventilátorsebességét használja).\n" +"Csak a disable_fan_first_layers segítségével írható felül." -msgid "Start the application" -msgstr "Az alkalmazás indítása" +msgid "Top fan speed" +msgstr "Max ventilátor sebesség" msgid "" -"Starting with %1% 2.3, configuration directory on Linux has changed " -"(according to XDG Base Directory Specification) to \n" -"%2%.\n" -"\n" -"This directory did not exist yet (maybe you run the new version for the " -"first time).\n" -"However, an old %1% configuration directory was detected in \n" -"%3%.\n" -"\n" -"Consider moving the contents of the old directory to the new location in " -"order to access your profiles, etc.\n" -"Note that if you decide to downgrade %1% in future, it will use the old " -"location again.\n" -"\n" -"What do you want to do now?" +"This fan speed is enforced during all top fills.\n" +"Set to 1 to disable the fan.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." msgstr "" -"A %1% 2.3-tól kezdve a konfigurációs könyvtár Linuxon (az XDG Base Directory " -"Specification szerint) %2%-ra változott.\n" -"\n" -"Ez a könyvtár még nem létezett (talán először futtatja az új verziót). A %3%-" -"ban azonban egy régi %1% konfigurációs könyvtárat észleltek.\n" -"\n" -"Fontolja meg a régi könyvtár tartalmának áthelyezését az új helyre, hogy " -"hozzáférhessen a profiljaihoz stb. \n" -"Vegye figyelembe, hogy ha a jövőben úgy dönt, hogy visszaáll a %1%-ra, a " -"program ismét a régi helyet fogja használni.\n" -"\n" -"Mit szeretne most tenni?" +"Ez a ventilátorsebesség minden felső töltésnél érvényesül.\n" +"A ventilátor kikapcsolásához állítsa 1-re.\n" +"A -1 értéket állítsa be a felülbírálat letiltásához.\n" +"Csak a disable_fan_first_layers paranccsal írható felül." -msgid "Status" -msgstr "Állapot" +msgid "Bridge flow ratio" +msgstr "Híd átfolyási aránya" -msgid "Status:" -msgstr "Státusz:" +msgid "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this." +msgstr "" +"Ez a tényező befolyásolja az áthidaló műanyag mennyiségét. Kicsit " +"csökkentheti, hogy húzza az extrudátumokat és megakadályozza a " +"megereszkedést, bár az alapbeállítások általában jók, és a hűtéssel is " +"érdemes kísérletezni (ventilátorral), mielőtt ezen csípkelődne." -msgid "Stealth" -msgstr "Lopakodó" +msgid "Above the bridges" +msgstr "A hidak felett" -msgid "Stealth mode" -msgstr "Lopakodó mód" +msgid "Above bridge flow ratio" +msgstr "Híd feletti áramlási arány" -msgid "stealth mode" -msgstr "lopakodó mód" - -msgid "Stop at height" -msgstr "Befejezés ebben a magasságban" +msgid "" +"Flow ratio to compensate for the gaps in a bridged top surface. Used for " +"ironing infillpattern to prevent regions where the low-flow pass does not " +"provide a smooth surface due to a lack of plastic. You can increase it " +"slightly to pull the top layer at the correct height. Recommended maximum: " +"120%." +msgstr "" +"Áramlási arány az áthidalt felső felület hézagainak kompenzálására. Vasalási " +"infillmintához használatos, hogy megelőzze azokat a régiókat, ahol az " +"alacsony áramlású átmenettel nem lehet sima felületet biztosítani a műanyag " +"hiánya miatt. Kicsit növelheti, hogy a felső réteget a megfelelő magasságban " +"húzza. Ajánlott maximális érték: 120%." -msgid "Stop them and continue anyway?" -msgstr "Megállítja őket, és akkor is folytatja?" +msgid "Min" +msgstr "Min" -msgid "Style" -msgstr "Stílus" +msgid "Min bridge density" +msgstr "Min. híd sűrűség" msgid "" -"Style and shape of the support towers. Projecting the supports into a " -"regular grid will create more stable supports, while snug support towers " -"will save material and reduce object scarring." +"Minimum density for bridge lines. If Lower than bridge_overlap, then the " +"overlap value can be lowered automatically down to this value. If the value " +"is higher, this parameter has no effect.\n" +"Default to 87.5% to allow a little void between the lines." msgstr "" -"A támaszok stílusa és formája. A támaszok szabályos rácsba vetítése " -"stabilabb támaszokat hoz létre, míg a simulékony támasz tornyok anyagot " -"takarítanak meg és csökkentik az objektumok hegesedését." +"Minimális sűrűség a hídvonalakhoz. Ha kisebb, mint a bridge_overlap, akkor " +"az átfedés értéke automatikusan lecsökkenthető erre az értékre. Ha az érték " +"magasabb, akkor ennek a paraméternek nincs hatása.\n" +"Alapértelmezett értéke 87,5%, hogy a vonalak között legyen egy kis üresség." -msgid "Success!" -msgstr "Siker!" +msgid "Max" +msgstr "Max" + +msgid "Max bridge density" +msgstr "Max híd sűrűség" msgid "" -"Successfully unmounted. The device %s(%s) can now be safely removed from the " -"computer." +"Maximum density for bridge lines. If you want more space between line (or " +"less), you can modify it. A value of 50% will create two times less lines, " +"and a value of 200% will create two time more lines that overlap each other." msgstr "" -"Sikeresen leválasztva. A %s(%s) eszköz most biztonságosan eltávolítható a " -"számítógépről." - -msgid "support" -msgstr "támasz" - -msgid "Support base diameter" -msgstr "A támasztó alapjának átmérője" +"A hídvonalak maximális sűrűsége. Ha több (vagy kevesebb) sortávolságot " +"szeretne, módosíthatja. Az 50%-os érték kétszer kevesebb vonalat hoz létre, " +"a 200%-os érték pedig kétszer több egymást átfedő vonalat." -msgid "Support base height" -msgstr "A támasztó alapjának magassága" +msgid "Bridges" +msgstr "Hidak" -msgid "Support base safety distance" -msgstr "A támasztó alapjának biztonsági távolsága" +msgid "Bridge speed" +msgstr "Híd sebesség" -msgid "Support Blocker" -msgstr "Támasz Blokkoló" +msgid "Speed for printing bridges." +msgstr "A hidak nyomtatásának sebessége." -msgid "Support Cubic" -msgstr "Támasztó Kocka" +msgid "mm/s" +msgstr "mm/mp" -msgid "Support Enforcer" -msgstr "Támasz Kényszerítő" +msgid "Internal bridges" +msgstr "Belső hidak" -msgid "Support Generator" -msgstr "Támasz generátor" +msgid "Internal bridge speed" +msgstr "Belső híd sebessége" -msgid "Support head" -msgstr "Támasztó fej" +msgid "" +"Speed for printing the bridges that support the top layer.\n" +"Can be a % of the bridge speed." +msgstr "" +"A felső réteget tartó hidak nyomtatásának sebessége.\n" +"A híd sebességének %-a lehet." -msgid "support interface" -msgstr "támasz felület" +msgid "mm/s or %" +msgstr "mm/mp vagy %" -msgid "Support material" -msgstr "Támaszanyag" +msgid "Brim inside holes" +msgstr "Perem belső lyukak" -msgid "Support material interface" -msgstr "Támaszanyag interfész" +msgid "" +"Allow to create a brim over an island when it's inside a hole (or surrounded " +"by an object)." +msgstr "" +"Lehetővé teszi, hogy egy sziget fölött peremet hozzon létre, ha az egy " +"lyukban van (vagy egy tárgy veszi körül)." -msgid "Support material/raft interface extruder" -msgstr "Támaszanyag interfész / tutaj extruder" +msgid "Brim width" +msgstr "Peremszélesség" -msgid "Support on build plate only" -msgstr "Támaszték csak tárgyasztalról" +msgid "" +"Horizontal width of the brim that will be printed around each object on the " +"first layer." +msgstr "" +"A perem vízszintes szélessége, amely az első réteg minden egyes objektuma " +"köré lesz nyomtatva." -msgid "Support parameter change" -msgstr "Támaszték paraméter változtatása" +msgid "Interior Brim width" +msgstr "Belső perem szélessége" -msgid "Support pillar" -msgstr "Támasztó pillér" +msgid "" +"Horizontal width of the brim that will be printed inside each object on the " +"first layer." +msgstr "" +"A perem vízszintes szélessége, amely az első réteg minden egyes objektumának " +"belsejébe kerül nyomtatásra." -msgid "Support points density" -msgstr "Támadztó pontok sűrűsége" +msgid "Brim ears" +msgstr "Keretes fülek" -msgid "Support points edit" -msgstr "Támasztópontok szerkesztése" +msgid "Only draw brim over the sharp edges of the model." +msgstr "Csak a modell éles szélei fölé húzza a karimát." -msgid "Supports" -msgstr "Támasztékok" +msgid "Max angle" +msgstr "Max szög" -msgid "supports and pad" -msgstr "támasztók és párna" +msgid "Brim ear max angle" +msgstr "Peremfül max. szög" -msgid "Supports remaining times" -msgstr "Hátralévő idő támogatása" +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~178, brim will be created on everything but straight sections." +msgstr "" +"Maximális szög, hogy egy peremfül megjelenhessen. \n" +"Ha 0-ra van állítva, nem jön létre perem. \n" +"Ha ~178-ra van állítva, a perem mindenhol létrejön, kivéve az egyenes " +"szakaszokon." -msgid "Supports stealth mode" -msgstr "Lopakodó mód támogatása" +msgid "Detection radius" +msgstr "Érzékelési sugár" -msgid "Suppress \" - default - \" presets" -msgstr "Az \" - alapértelmezett - \" előbeállítások elrejtése" +msgid "Brim ear detection length" +msgstr "Peremfül érzékelési hossza" msgid "" -"Suppress \" - default - \" presets in the Print / Filament / Printer " -"selections once there are any other valid presets available." +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" msgstr "" -"Ha engedélyezve van, akkor elrejti az \" - alapértelmezett - \" előre " -"beállított értékeket a Nyomtatás / Filament / Nyomtató kiválasztásában, ha " -"más érvényes előbeállítások állnak rendelkezésre." +"A geometriát az éles szögek dekódolása előtt megtizedelik. Ez a paraméter a " +"decimáláshoz szükséges eltérés minimális hosszát adja meg.\n" +"0 a kikapcsoláshoz" -msgid "Suppress to open hyperlink in browser" -msgstr "A hiperhivatkozások böngészőben való megnyitásának letiltása" +msgid "Pattern" +msgstr "Mintázat" -msgid "SVG" -msgstr "SVG" +msgid "Ear pattern" +msgstr "Fül mintázata" -msgid "Swap Y/Z axes" -msgstr "Az Y/Z tengely felcserélése" +msgid "" +"Pattern for the ear. The concentric is the default one. The rectilinear has " +"a perimeter around it, you can try it if the concentric has too many " +"problems to stick to the build plate." +msgstr "" +"Mintázat a fülhöz. A koncentrikus az alapértelmezett. A egyenes vonalúnak " +"van egy kerülete körül, ezt kipróbálhatja, ha a koncentrikusnak túl sok " +"problémája van azzal, hogy megtapadjon az építőlemezen." -msgid "Switch between Editor/Preview" -msgstr "Váltás Szerkesztő/Előnézet között" +msgid "Concentric" +msgstr "Koncentrikus" -msgid "Switch code to Change extruder" -msgstr "Kapcsolókód az Extruder váltáshoz" +msgid "Rectilinear" +msgstr "Egyenes vonalú" -msgid "Switch code to Color change (%1%) for:" -msgstr "Váltókód színváltáshoz (%1%) a következőhöz:" +msgid "Brim offset" +msgstr "Peremeltolás" -msgid "Switch to editing mode" -msgstr "Váltás szerkesztés módra" +msgid "" +"Distance between the brim and the part. Should be kept at 0 unless you " +"encounter great difficulties to separate them. It's subtracted to brim_width " +"and brim_width_interior, so it has to be lower than them" +msgstr "" +"A perem és az alkatrész közötti távolság. 0-nak kell tartani, kivéve, ha " +"nagy nehézségekbe ütközik a szétválasztásuk. A brim_width és a " +"brim_width_interior értékekből levonásra kerül, ezért alacsonyabbnak kell " +"lennie ezeknél" -msgid "Switch to Settings" -msgstr "Váltás a Beállításokra" +msgid "Chamber" +msgstr "Kamara" -msgid "Switching Presets: Unsaved Changes" -msgstr "Előbeállítások Átváltása: Nem Mentett Módosítások" +msgid "Chamber temperature" +msgstr "Kamra hőmérséklete" msgid "" -"Switching the printer technology from %1% to %2%.\n" -"Some %1% presets were modified, which will be lost after switching the " -"printer technology." +"Chamber temperature. Note that this setting doesn't do anything, but you can " +"access it in Start G-code, Tool change G-code and the other ones, like for " +"other temperature settings." msgstr "" -"A nyomtatási technológia átváltása %1%-ról %2%-ra. \n" -"Néhány %1% előbeállítás módosult, amelyek a nyomtatási technológia átváltása " -"után elvesznek." +"Kamrahőmérséklet. Vegye figyelembe, hogy ez a beállítás nem csinál semmit, " +"de a Start G-kódban, a Tool change G-kódban és a többiben elérheti, akárcsak " +"a többi hőmérséklet-beállításnál." + +msgid "Clip multi-part objects" +msgstr "Többrészes objektumok vágása" msgid "" -"Switching to simple settings will discard changes done in the advanced " -"mode!\n" -"\n" -"Do you want to proceed?" +"When printing multi-material objects, this settings will make Slic3r to clip " +"the overlapping object parts one by the other (2nd part will be clipped by " +"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" -"Az egyszerű beállításokra való váltással a speciális módban végzett " -"módosítások elvetésre kerülnek!\n" -"\n" -"Akarja folytatni?" +"Több anyagból készült objektumok nyomtatásakor ez a beállítás arra készteti " +"a Slic3r-t, hogy az átfedő objektumrészeket egymás után vágja le (a 2. részt " +"az 1. rész fogja levágni, a 3. részt az 1. és 2. rész fogja levágni stb.)." -msgid "symbolic profile name" -msgstr "szimbolikus profil név" +msgid "Colorprint height" +msgstr "Színnyomat magassága" + +msgid "Heights at which a filament change is to occur. " +msgstr "" +"Azok a magasságok, amelyeknél az nyomtatószál-váltásnak meg kell történnie. " + +msgid "Compatible printers condition" +msgstr "Kompatibilis nyomtatók állapota" msgid "" -"Synchronize support layers with the object print layers. This is useful with " -"multi-material printers, where the extruder switch is expensive." +"A boolean expression using the configuration values of an active printer " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active printer profile." msgstr "" -"Támasztórétegek szinkronizálása az objektum nyomtatási rétegekkel. Ez több-" -"anyagos nyomtatóknál hasznos, ahol az extruder váltás költséges művelet." +"Egy aktív nyomtatóprofil konfigurációs értékeit használó bólés kifejezés. Ha " +"a kifejezés értéke igaz, akkor ez a profil kompatibilisnek tekinthető az " +"aktív nyomtatóprofillal." -msgid "Synchronize with object layers" -msgstr "Szinkronizálás objektumrétegekkel" +msgid "Compatible print profiles condition" +msgstr "Kompatibilis nyomtatási profilok állapota" -msgid "System &Info" -msgstr "Rendszer információ" +msgid "" +"A boolean expression using the configuration values of an active print " +"profile. If this expression evaluates to true, this profile is considered " +"compatible with the active print profile." +msgstr "" +"Egy aktív nyomtatási profil konfigurációs értékeit használó bólés kifejezés. " +"Ha a kifejezés értéke igaz, akkor ez a profil kompatibilisnek tekinthető az " +"aktív nyomtatási profillal." -msgid "System Information" -msgstr "Rendszerinformáció" +msgid "Complete individual objects" +msgstr "Teljes egyedi objektumok" -msgid "System presets" -msgstr "Rendszer előbeállítások" +msgid "" +"When printing multiple objects or copies, this feature will complete each " +"object before moving onto next one (and starting it from its bottom layer). " +"This feature is useful to avoid the risk of ruined prints. Slic3r should " +"warn and prevent you from extruder collisions, but beware." +msgstr "" +"Több objektum vagy másolat nyomtatásakor ez a funkció minden egyes " +"objektumot befejez, mielőtt a következőre lépne (és annak alsó rétegéről " +"kezdené). Ez a funkció hasznos a tönkrement nyomatok kockázatának elkerülése " +"érdekében. A Slic3r-nek figyelmeztetnie kell és meg kell akadályoznia az " +"extruder ütközéseket, de vigyázzon." -msgid "Take Configuration &Snapshot" -msgstr "Konfigurációs Pillanatfelvétel Készítése" +msgid "Allow only one skirt loop" +msgstr "Csak egy szoknyahurok engedélyezése" -msgid "Taking a configuration snapshot" -msgstr "Konfigurációs pillanatkép készítése" +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the skirt around each object. if you prefer to have only one skirt for the " +"whole platter, use this option." +msgstr "" +"Ha a 'Teljes egyedi objektumok' opciót használja, az alapértelmezett " +"viselkedés az, hogy minden egyes objektum köré megrajzolja a szoknyát. ha " +"azt szeretné, hogy csak egy szoknya legyen az egész tálcán, használja ezt az " +"opciót." -msgid "Taking a configuration snapshot failed." -msgstr "A konfigurációs pillanatfelvétel készítése nem sikerült." +msgid "Print all brim at startup" +msgstr "Minden perem nyomtatása indításkor" -msgid "Temperature" -msgstr "Hőmérséklet" +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the brim at the beginning of each object. if you prefer to have more place " +"for you objects, you can print all the brims at the beginning, so ther is " +"less problem with collision." +msgstr "" +"Ha a 'Teljes egyedi objektumok' opciót használja, az alapértelmezett " +"viselkedés az, hogy a peremet minden objektum elején rajzolja meg. Ha több " +"helyet szeretne az objektumoknak, akkor az összes peremet az elején " +"nyomtathatja ki, így kevesebb probléma lesz az ütközéssel." -msgid "Temperature (°C)" -msgstr "Hőmérséklet (°C)" +msgid "Object sort" +msgstr "Objektum rendezés" msgid "" -"Temperature difference to be applied when an extruder is not active. Enables " -"a full-height \"sacrificial\" skirt on which the nozzles are periodically " -"wiped." +"When printing multiple objects or copies on after another, this will help " +"you to choose how it's ordered.\n" +"Object will sort them by the order of the right panel.\n" +"Lowest Y will sort them by their lowest Y point. Useful for printers with a " +"X-bar.\n" +"Lowest Z will sort them by their height, useful for delta printers." msgstr "" -"Hőmérsékletkülönbség a nem aktív extruderek esetén. Engedélyezi továbbá egy " -"teljes magasságú \"áldozati\" szoknyát amelyen a fúvókák időszakosan " -"tisztításra kerülnek." +"Ha több objektumot vagy másolatot nyomtat egymás után, ez segít kiválasztani " +"a sorrendet.\n" +"Az objektum a jobb oldali panel sorrendje szerint rendezi őket.\n" +"A Legalacsonyabb Y a legalacsonyabb Y pontjuk szerint fogja őket rendezni. " +"Hasznos az X-sávval rendelkező nyomtatóknál.\n" +"A Legalacsonyabb Z a magasságuk szerint rendezi őket, hasznos a delta " +"nyomtatóknál." -msgid "Temperature variation" -msgstr "Hőmérséklet-változás" +msgid "Right panel" +msgstr "Jobb oldali panel" -msgid "Temperatures" -msgstr "Hőmérséklet(ek)" +msgid "lowest Y" +msgstr "legkisebb Y" -msgid "Template Custom G-code" -msgstr "G-kód Egyedi Minta" +msgid "lowest Z" +msgstr "legkisebb Z" -msgid "Test" -msgstr "Teszt" +msgid "Enable auto cooling" +msgstr "Autom. hűtés bekapcsolása" -msgid "Text colors" -msgstr "Szöveg színek" +msgid "" +"This flag enables the automatic cooling logic that adjusts print speed and " +"fan speed according to layer printing time." +msgstr "" +"Ez a jelző engedélyezi az automatikus hűtési logikát, amely a nyomtatási " +"sebességet és a ventilátor sebességét a rétegnyomtatási időnek megfelelően " +"állítja be." -msgid "Texture" -msgstr "Textúra" +msgid "Cooling tube position" +msgstr "Hűtőcső pozíciója" -msgid "The %1% infill pattern is not supposed to work at 100%% density." -msgstr "A %1%-os kitöltési minta nem tud 100%%-os sűrűség mellett működni." +msgid "Distance of the center-point of the cooling tube from the extruder tip." +msgstr "A hűtőcső középpontjának távolsága az extruder csúcsától." -msgid "The %s device could not have been found" -msgstr "A %s eszköz nem található" +msgid "Cooling tube length" +msgstr "Hűtőcső hossza" + +msgid "Length of the cooling tube to limit space for cooling moves inside it." +msgstr "A hűtőcső hossza, hogy korlátozza a benne lévő hűtési mozgások helyét." + +msgid "Default acceleration" +msgstr "Alapértelmezett gyorsítás" msgid "" -"The %s device was not found.\n" -"If the device is connected, please press the Reset button next to the USB " -"connector ..." +"This is the acceleration your printer will be reset to after the role-" +"specific acceleration values are used (perimeter/infill). \n" +"You can set it as a % of the max of the X machine acceleration limit.\n" +"Set zero to prevent resetting acceleration at all." msgstr "" -"Az %s eszköz nem található.\n" -"Ha az eszköz csatlakoztatva van, kérem nyomja meg az USB csatlakozó mellett " -"található Reset gombot ..." +"Ez az a gyorsulás, amelyre a nyomtatót a szerepkör-specifikus gyorsulási " +"értékek használata után visszaállítják (kerület/kitöltés). \n" +"Ezt az X gépi gyorsulási határérték max. %-ában állíthatja be.\n" +"Ha nullát állít be, akkor a gyorsulás egyáltalán nem állítható vissza." + +msgid "Default filament profile" +msgstr "Alapért. szálprofil" msgid "" -"The active configuration was created by %1% %2%,\n" -"while a newer configuration was found in %3%\n" -"created by %1% %4%.\n" -"\n" -"Shall the newer configuration be imported?\n" -"If so, your active configuration will be backed up before importing the new " -"configuration." +"Default filament profile associated with the current printer profile. On " +"selection of the current printer profile, this filament profile will be " +"activated." msgstr "" -"Az aktív konfigurációt a %1% %2% hozta létre, míg a %3%-ban " -"egy újabb konfigurációt találtak, amelyet a %1% %4% hozott létre.\n" -"\n" -"Importáljuk az újabb konfigurációt? \n" -"Ha igen, akkor az aktív konfigurációról biztonsági másolat készül az új " -"konfiguráció importálása előtt." +"Az aktuális nyomtatóprofilhoz tartozó alapértelmezett szálprofil. Az " +"aktuális nyomtatóprofil kiválasztásakor ez az izzószál-profil aktiválódik." + +msgid "Default print profile" +msgstr "Alapért. nyomtatási profil" msgid "" -"The current custom preset will be detached from the parent system preset." +"Default print profile associated with the current printer profile. On " +"selection of the current printer profile, this print profile will be " +"activated." msgstr "" -"Az aktuális egyéni-előbeállítás leválik a szülő rendszer-előbeállításáról." +"Az aktuális nyomtatóprofilhoz tartozó alapértelmezett nyomtatási profil. Az " +"aktuális nyomtatóprofil kiválasztásakor ez a nyomtatási profil aktiválódik." + +msgid "Disable fan for the first" +msgstr "A ventilátor kikapcsolása az első" msgid "" -"The currently manipulated object is tilted (rotation angles are not " -"multiples of 90°).\n" -"Non-uniform scaling of tilted objects is only possible in the World " -"coordinate system,\n" -"once the rotation is embedded into the object coordinates." +"You can set this to a positive value to disable fan at all during the first " +"layers, so that it does not make adhesion worse." msgstr "" -"Az éppen manipulált objektum ferde (az elforgatási szögek nem 90° " -"többszörösei).\n" -"A ferde objektumok nem egységes skálázása csak a világkoordinátarendszerben " -"lehetséges,\n" -"miután a forgatás beágyazódik az objektum koordinátáiba." +"Ezt pozitív értékre is beállíthatja, hogy az első rétegeknél egyáltalán ne " +"legyen ventilátor, így nem rontja a tapadást." -msgid "The default angle for connecting support sticks and junctions." -msgstr "" -"Az alapértelmezett szög a támasztópálcák és csomópontok összekötéséhez." +msgid "Don't support bridges" +msgstr "Ne támogassa a hidakat" msgid "" -"The endings of the support pillars will be deployed on the gap between the " -"object and the pad. 'Support base safety distance' has to be greater than " -"the 'Pad object gap' parameter to avoid this." +"Experimental option for preventing support material from being generated " +"under bridged areas." msgstr "" -"A tartóoszlopok végződései az objektum és a párna közötti résen lesznek " -"elhelyezve. Ennek elkerülése érdekében a 'A támasztó alapjának biztonsági " -"távolsága' paraméternek nagyobbnak kell lennie, mint a 'Párna objektum " -"hézag' paraméternek." +"Kísérleti lehetőség a hordozóanyag keletkezésének megakadályozására az " +"áthidalt területek alatt." + +msgid "Draft shield" +msgstr "Pajzs tervezet" msgid "" -"The extruder to use (unless more specific extruder settings are specified). " -"This value overrides perimeter and infill extruders, but not the support " -"extruders." +"If enabled, the skirt will be as tall as a highest printed object. This is " +"useful to protect an ABS or ASA print from warping and detaching from print " +"bed due to wind draft." msgstr "" -"A használni kívánt extruder (kivéve, ha specifikusabb extruder-beállítások " -"vannak megadva). Ez az érték felülbírálja a perem- és a kitöltő " -"extrudereket, de a tartó extrudereket nem." +"Ha engedélyezve van, a szoknya olyan magas lesz, mint egy legmagasabb " +"nyomtatott tárgy. Ez hasznos az ABS- vagy ASA-nyomtatás védelmére, hogy a " +"szélhuzat miatt ne vetemedjen és ne váljon le a nyomtatóágyról." -msgid "The extruder to use when printing infill." -msgstr "A kitöltés nyomtatásához használt extruder." +msgid "Default distance between objects" +msgstr "Objektumok közötti alapértelmezett távolság" msgid "" -"The extruder to use when printing perimeters and brim. First extruder is 1." +"Default distance used for the auto-arrange feature of the platter.\n" +"Set to 0 to use the last value instead." msgstr "" -"A kerület és a karima nyomtatásához használt extruder. Az első extruder az 1-" -"es." +"A tányér automatikus rendezési funkciójának alapértelmezett távolsága.\n" +"Ha 0-ra állítja, akkor az utolsó értéket használja helyette." -msgid "The extruder to use when printing solid infill." -msgstr "A tömör kitöltés nyomtatásához használt extruder." +msgid "End G-code" +msgstr "G-kód vége" msgid "" -"The extruder to use when printing support material interface (1+, 0 to use " -"the current extruder to minimize tool changes). This affects raft too." +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." msgstr "" -"A támaszanyag interfész nyomtatásához használt extruder (1+, 0 az éppen " -"aktuális extruder használatához a szerszámváltások minimalizálása " -"érdekében). Ez hatással van a tutajra is." +"Ez a befejező eljárás a kimeneti fájl végére kerül. Vegye figyelembe, hogy a " +"Slic3r összes beállításához használhat helyőrző változókat." -msgid "The filament material type for use in custom G-codes." -msgstr "A filament típus egyedi G-kódokhoz használható." +msgid "Filament end G-code" +msgstr "Nyomtatószál G-kód vége" msgid "" -"The file where the output will be written (if not specified, it will be " -"based on the input file)." +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode (and before any toolchange from this filament in case of " +"multimaterial printers). Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." msgstr "" -"Az a fájl, ahová a kimenet kiírásra kerül (ha nincs megadva, akkor a " -"bemeneti fájlon alapul)." +"Ez a befejező eljárás a kimeneti fájl végére kerül, a nyomtató végének G-" +"kódja elé (és többanyagú nyomtatók esetén az adott szálból történő " +"szerszámváltás előtt). Vegye figyelembe, hogy minden Slic3r-beállításhoz " +"használhat helyőrző változókat. Ha több extruderrel rendelkezik, a G-kód " +"feldolgozása az extruder sorrendjében történik." -msgid "The firmware supports stealth mode" -msgstr "A firmware támogatja a lopakodó módot" +msgid "Ensure vertical shell thickness" +msgstr "Függőleges héjvastagság biztosítása" -msgid "The following characters are not allowed by a FAT file system:" -msgstr "A következő karaktereket a FAT fájlrendszer nem támogatja:" - -msgid "the following characters are not allowed:" -msgstr "a következő karakterek nem engedélyezettek:" +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers).\n" +"!! solid_over_perimeters may erase these surfaces !!" +msgstr "" +"A lejtős felületek közelében szilárd kitöltés hozzáadása a függőleges " +"héjvastagság garantálása érdekében (felső+alsó szilárd rétegek).\n" +"!! solid_over_perimeters törölheti ezeket a felületeket !!" -msgid "The following FFF printer models have no filament selected:" -msgstr "A következő FFF nyomtatókhoz nincs kiválasztva filament:" +msgid "Top Pattern" +msgstr "Felső minta" msgid "" -"The following line %s contains reserved keywords.\n" -"Please remove it, as it may cause problems in G-code visualization and " -"printing time estimation." -msgid_plural "" -"The following lines %s contain reserved keywords.\n" -"Please remove them, as they may cause problems in G-code visualization and " -"printing time estimation." -msgstr[0] "" -"A következő %s sor foglalt kulcsszavakat tartalmaz.\n" -"Kérjük, távolítsa el ezt, mivel problémákat okozhat a G-kód megjelenítésében " -"és a nyomtatási idő becslésében." -msgstr[1] "" -"A következő %s sorok foglalt kulcsszavakat tartalmaznak.\n" -"Kérjük, távolítsa el ezeket, mivel problémákat okozhat a G-kód " -"megjelenítésében és a nyomtatási idő becslésében." +"Fill pattern for top infill. This only affects the top visible layer, and " +"not its adjacent solid shells." +msgstr "" +"Töltse ki a felső kitöltés mintáját. Ez csak a felső látható réteget érinti, " +"a szomszédos tömör héjakat nem." -msgid "The following model was repaired successfully" -msgid_plural "The following models were repaired successfully" -msgstr[0] "A következő modell javítása sikerült" -msgstr[1] "A következő modellek javítása sikerült" +msgid "Monotonic (filled)" +msgstr "Monoton (töltött)" -msgid "The following preset was modified" -msgid_plural "The following presets were modified" -msgstr[0] "A következő előbeállítás módosult" -msgstr[1] "A következő előbeállítások módosultak" +msgid "Monotonic" +msgstr "Monoton" -msgid "" -"The following shortcuts are applicable in G-code preview when the horizontal " -"slider is active" -msgstr "" -"A következő billentyűparancsok használhatók a G-kód előnézetében, amikor a " -"vízszintes csúszka aktív" +msgid "Concentric (filled)" +msgstr "Koncentrikus (töltött)" + +msgid "Hilbert Curve" +msgstr "Hilbert görbe" + +msgid "Archimedean Chords" +msgstr "Arkhimédeszi akkordok" + +msgid "Octagram Spiral" +msgstr "Oktagram spirál" + +msgid "Sawtooth" +msgstr "Fűrészfog" + +msgid "Bottom fill pattern" +msgstr "Alsó kitöltési minta" msgid "" -"The following shortcuts are applicable in G-code preview when the vertical " -"slider is active" +"Fill pattern for bottom infill. This only affects the bottom visible layer, " +"and not its adjacent solid shells." msgstr "" -"A következő billentyűparancsok használhatók a G-kód előnézetében, amikor a " -"függőleges csúszka aktív" +"Kitöltési minta az alsó kitöltéshez. Ez csak az alsó látható réteget érinti, " +"a szomszédos tömör héjakat nem." + +msgid "Solid pattern" +msgstr "Szilárd minta" msgid "" -"The following shortcuts are applicable when the specified gizmo is active" +"Fill pattern for solid (internal) infill. This only affects the solid not-" +"visible layers. You should use rectilinear in most cases. You can try " +"ironing for translucent material. Rectilinear (filled) replaces zig-zag " +"patterns by a single big line & is more efficient for filling little spaces." msgstr "" -"A következő parancsikonok akkor alkalmazhatók, ha a megadott gizmo aktív" - -msgid "The following SLA printer models have no materials selected:" -msgstr "A következő SLA nyomtatókhoz nincs kiválasztva anyag:" +"Töltési minta tömör (belső) kitöltéshez. Ez csak a szilárd, nem látható " +"rétegeket érinti. A legtöbb esetben egyenes vonalat kell használni. Az " +"áttetsző anyagokhoz kipróbálhatja a vasalást. Az egyenes vonalú (töltött) " +"egyetlen nagy vonallal helyettesíti a cikk-cakk mintákat, és hatékonyabban " +"tölti ki a kis helyeket." -msgid "the following suffix is not allowed:" -msgstr "a következő utótag nem engedélyezett:" +msgid "Rectilinear (filled)" +msgstr "Egyenes (töltött)" -msgid "The following values were substituted:" -msgstr "A következő értékek helyettesítésre kerültek:" +msgid "Enforce 100% fill volume" +msgstr "100%-os töltési térfogat érvényesítése" msgid "" -"The gap between the object bottom and the generated pad in zero elevation " -"mode." +"Experimental option which modifies (in solid infill) fill flow to have the " +"exact amount of plastic inside the volume to fill (it generally changes the " +"flow from -7% to +4%, depending on the size of the surface to fill and the " +"overlap parameters, but it can go as high as +50% for infill in very small " +"areas where rectilinear doesn't have good coverage). It has the advantage to " +"remove the over-extrusion seen in thin infill areas, from the overlap ratio" msgstr "" -"Az objektum alja és a generált párna közötti hézag nulla magasságú módban." +"Kísérleti opció, amely módosítja (szilárd kitöltés esetén) a kitöltés " +"áramlását, hogy a kitöltendő térfogaton belül pontosan annyi műanyag legyen, " +"amennyi a kitöltendő térfogatban van (általában -7% és +4% között " +"változtatja az áramlást, a kitöltendő felület méretétől és az átfedési " +"paraméterektől függően, de akár +50%-ig is elmehet a nagyon kis területek " +"kitöltése esetén, ahol a egyenes vonalú nem jó a lefedettség). Előnye, hogy " +"az átfedési arányból kiküszöböli a vékony kitöltési területeken " +"tapasztalható túlterjedést" -msgid "The height of the pillar base cone" -msgstr "A pillér alapkúpjának magassága" +msgid "Default infill margin" +msgstr "Alapértelmezett kitöltési margó" msgid "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." +"This parameter grows the top/bottom/solid layers by the specified mm to " +"anchor them into the sparse infill and support the perimeters above. Put 0 " +"to deactivate it. Can be a % of the width of the perimeters." msgstr "" -"Az importált SLA-archívum nem tartalmazott előbeállításokat. Az aktuális SLA " -"előbeállítások kerülnek felhasználásra." +"Ez a paraméter a felső/alsó/szilárd rétegeket a megadott mm-rel növeli, hogy " +"a ritkás kitöltésbe rögzítse őket, és megtámassza a fenti kerületeket. A " +"kikapcsoláshoz tegye be a 0 értéket. Lehet a kerületek szélességének %-a." + +msgid "mm/%" +msgstr "mm/%" + +msgid "Bridged" +msgstr "Áthidalt" + +msgid "Bridge margin" +msgstr "Hídszegély" msgid "" -"The last color change data was saved for a multi extruder printing with tool " -"changes for whole print." +"This parameter grows the bridged solid infill layers by the specified mm to " +"anchor them into the sparse infill and over the perimeters below. Put 0 to " +"deactivate it. Can be a % of the width of the external perimeter." msgstr "" -"Az utolsó színváltási adatok több extruderrel történő nyomtatáshoz a teljes " -"nyomtatásra vonatkozó szerszámváltásokkal együtt elmentésre kerültek." +"Ez a paraméter a megadott mm-rel növeli az áthidalt tömör kitöltési " +"rétegeket, hogy azokat a ritkás kitöltésbe és az alatta lévő kerületek fölé " +"rögzítse. A kikapcsoláshoz tegye be a 0 értéket. Lehet a külső kerület " +"szélességének %-a." -msgid "The last color change data was saved for a multi extruder printing." -msgstr "" -"Az utolsó színváltási adatokat több extruderrel történő nyomtatáshoz " -"mentették el." +msgid "External perimeters" +msgstr "Külső kerületek" -msgid "The last color change data was saved for a single extruder printing." -msgstr "" -"Az utolsó színváltási adatokat egyetlen extruderrel történő nyomtatáshoz " -"mentették el." +msgid "External perimeters width" +msgstr "Külső kerület szélessége" msgid "" -"The max distance of two pillars to get linked with each other. A zero value " -"will prohibit pillar cascading." -msgstr "" -"Két oszlop maximális távolsága, amelyeket még össze lehet kötni egymással. A " -"nulla érték tiltja az oszlopok kaszkádosítását." +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.05 x nozzle diameter will be used. If expressed as percentage " +"(for example 112.5%), it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Állítsa ezt a nullától eltérő értékre a külső kerületek kézi kihúzási " +"szélességének beállításához. Ha nulla marad, akkor az alapértelmezett " +"extrudálási szélesség kerül felhasználásra, ha be van állítva, ellenkező " +"esetben 1,05 x fúvókaátmérő lesz használatos. Ha százalékban fejezik ki " +"(például 112,5%), akkor a fúvóka átmérője alapján számítják ki.\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása a " +"kerületi 'Átfedés' százalékos és az alapértelmezett rétegmagasság " +"felhasználásával történik." -msgid "The max length of a bridge" -msgstr "A híd maximális hossza" +msgid "mm or %" +msgstr "mm vagy %" + +msgid "External perimeters spacing" +msgstr "Külső kerületek távolsága" + +msgid "" +"Like the External perimeters width, but this value is the distance between " +"the edge and the 'frontier' to the next perimeter.\n" +"Setting the spacing will deactivate the width setting, and vice versa.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Mint a külső kerületek szélessége, de ez az érték a széle és a következő " +"kerület „határa” közötti távolság.\n" +"A távolság beállítása deaktiválja a szélesség beállítását, és fordítva.\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása a " +"kerületi 'Átfedés' százalékos és az alapértelmezett rétegmagasság " +"felhasználásával történik." + +msgid "Cutting corners" +msgstr "Sarkok vágása" + +msgid "Ext. peri. cut corners" +msgstr "Ext. ker. vágott sarkokat" + +msgid "" +"Activate this option to modify the flow to acknowledge that the nozzle is " +"round and the corners will have a round shape, and so change the flow to " +"realize that and avoid over-extrusion. 100% is activated, 0% is deactivated " +"and 50% is half-activated.\n" +"Note: At 100% this changes the flow by ~5% over a very small distance " +"(~nozzle diameter), so it shouldn't be noticeable unless you have a very big " +"nozzle and a very precise printer.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Aktiválja ezt az opciót az áramlás módosításához, hogy tudomásul vegye, hogy " +"a fúvóka kerek, és a sarkok kerek alakúak lesznek, és így az áramlást úgy " +"módosítsa, hogy ezt megvalósítsa, és elkerülje a túlzott extrudálást. A " +"100% aktiválva van, a 0% kikapcsolva, az 50% pedig félig aktiválva.\n" +"Megjegyzés: 100%-nál ez ~5%-kal változtatja meg az áramlást egy nagyon kis " +"távolságon (~fúvókaátmérő), így ez nem lehet észrevehető, hacsak nincs " +"nagyon nagy fúvókája és nagyon precíz nyomtatója.\n" +"Ez nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Lehet, " +"hogy eltávolítjuk, ha nincs rá szükség." + +msgid "External perimeter fan speed" +msgstr "Külső kerületi ventilátor sebessége" + +msgid "" +"When set to a non-zero value this fan speed is used only for external " +"perimeters (visible ones). \n" +"Set to 1 to disable the fan.\n" +"Set to -1 to use the normal fan speed on external perimeters.External " +"perimeters can benefit from higher fan speed to improve surface finish, " +"while internal perimeters, infill, etc. benefit from lower fan speed to " +"improve layer adhesion." +msgstr "" +"Ha nem nulla értékre van állítva, ez a ventilátorsebesség csak a külső " +"kerületeknél (látható) használatos.\n" +"A ventilátor kikapcsolásához állítsa 1-re.\n" +"Állítsa -1-re a normál ventilátorsebesség használatához a külső kerületeken. " +"A külső kerületek számára előnyös lehet a magasabb ventilátorsebesség a " +"felületminőség javítása érdekében, míg a belső kerületek, a kitöltés stb. az " +"alacsonyabb ventilátorsebesség előnyeit élvezheti a réteg tapadása érdekében." + +msgid "external perimeter overlap" +msgstr "külső kerület átfedés" + +msgid "Ext. peri. overlap" +msgstr "Ext. ker. átfedés" + +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"external one, to reduce the impact of the perimeters' artifacts. 100% means " +"that no gap is left, and 0% means that the external perimeter isn't " +"contributing to the overlap with the 'inner' one.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Ez a beállítás lehetővé teszi, hogy csökkentse az átfedést a periméterek és " +"a külső kerületek között, hogy csökkentse a kerületek műtárgyainak hatását. " +"A 100% azt jelenti, hogy nem marad rés, a 0% pedig azt, hogy a külső kerület " +"nem járul hozzá a \"belső\" kerület átfedéséhez.\n" +"Ez nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Ha nincs " +"rá szükség, eltávolítható." + +msgid "perimeter overlap" +msgstr "kerületi átfedés" + +msgid "Perimeter overlap" +msgstr "Kerületi átfedés" + +msgid "" +"This setting allows you to reduce the overlap between the perimeters, to " +"reduce the impact of the perimeters' artifacts. 100% means that no gap is " +"left, and 0% means that perimeters are not touching each other anymore.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Ez a beállítás lehetővé teszi a peremterületek közötti átfedés csökkentését, " +"hogy csökkentse a peremterületek leletének hatását. A 100% azt jelenti, hogy " +"nem marad rés, a 0% pedig azt, hogy a kerületek már nem érnek egymáshoz.\n" +"Ez nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Ha nincs " +"rá szükség, eltávolítható." + +msgid "Better bonding" +msgstr "Jobb kötés" + +msgid "Perimeter bonding" +msgstr "Kerületi kötés" + +msgid "" +"This setting may slightly degrade the quality of your external perimeter, in " +"exchange for a better bonding between perimeters.Use it if you have great " +"difficulties with perimeter bonding, for example with high temperature " +"filaments.\n" +"This percentage is the % of overlap between perimeters, a bit like " +"perimeter_overlap and external_perimeter_overlap, but in reverse. You have " +"to set perimeter_overlap and external_perimeter_overlap to 100%, or this " +"setting has no effect. 0: no effect, 50%: half of the nozzle will be over an " +"already extruded perimeter while extruding a new one, unless it's an " +"external one).\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Ez a beállítás kissé ronthatja a külső kerület minőségét, cserébe a kerület " +"közötti jobb kötésért.Akkor használja, ha nagy nehézségei vannak a " +"kerületkötéssel, például magas hőmérsékletű szálak esetén.\n" +"Ez a százalék a periméterek közötti átfedés százalékos aránya, kicsit olyan, " +"mint a perimeter_overlap és a external_perimeter_overlap, de fordítva. A " +"perimeter_overlap és a external_perimeter_overlap értékét 100%-ra kell " +"állítani, különben ennek a beállításnak nincs hatása. 0: nincs hatása, 50%: " +"a fúvóka fele egy már extrudált kerület fölött lesz, miközben egy újat " +"extrudál, kivéve, ha külső kerületről van szó).\n" +"Ez nagyon kísérleti jellegű, kérjük, számolj be a hasznosságáról. Lehet, " +"hogy eltávolításra kerül, ha nincs rá szükség." + +msgid "External" +msgstr "Külső" + +msgid "External perimeters speed" +msgstr "Külső kerületi sebesség" msgid "" -"The minimum distance of the pillar base from the model in mm. Makes sense in " -"zero elevation mode where a gap according to this parameter is inserted " -"between the model and the pad." +"This separate setting will affect the speed of external perimeters (the " +"visible ones). If expressed as percentage (for example: 80%) it will be " +"calculated on the perimeters speed setting above. Set zero for auto." msgstr "" -"Az pillér alapjának legkisebb távolsága a modelltől mm-ben. Értelemszerűen a " -"nulla magasságú módban van értelme, ahol a modell és a pillér közé egy ennek " -"a paraméternek megfelelő rés kerül beillesztésre." +"Ez a különálló beállítás a külső (látható) peremek sebességét befolyásolja. " +"Ha százalékban van megadva (például: 80%), akkor a fenti peremkörök " +"sebességének beállítása alapján kerül kiszámításra. A nulla automatikus " +"érték." -msgid "The name cannot be empty." -msgstr "A név nem lehet üres." +msgid "first" +msgstr "első" -msgid "The name cannot be the same as a preset alias name." -msgstr "A név nem lehet azonos egy előbeállítás helyettesítő(alias) nevével." +msgid "External perimeters first" +msgstr "Először a külső kerületek" -msgid "The name cannot end with space character." -msgstr "A név nem végződhet szóközzel." +msgid "" +"Print contour perimeters from the outermost one to the innermost one instead " +"of the default inverse order." +msgstr "" +"Nyomtasson kontúr kerületeket a legkülsőtől a legbelsőig az alapértelmezett " +"fordított sorrend helyett." -msgid "The name cannot start with space character." -msgstr "A név nem kezdődhet szóközzel." +msgid "In vase mode (no seam)" +msgstr "Váza módban (nincs varrás)" + +msgid "ExternalPerimeter in vase mode" +msgstr "Külső kerület váza módban" msgid "" -"The number of bottom solid layers is increased above bottom_solid_layers if " -"necessary to satisfy minimum thickness of bottom shell." +"Print contour perimeters in two circles, in a continuous way, like for a " +"vase mode. It needs the external_perimeters_first parameter to work. \n" +"Doesn't work for the first layer, as it may damage the bed overwise. \n" +"Note that it will use min_layer_height from your hardware setting as the " +"base height (it doesn't start at 0), so be sure to put here the lowest value " +"your printer can handle. if it's not lower than two times the current layer " +"height, it falls back to the normal algorithm, as there is not enough room " +"to do two loops." msgstr "" -"Megnöveli az alsó szilárd rétegek számát a bottom_solid_layers fölé, ha " -"szükséges az alsó héj minimális vastagságának teljesítéséhez." +"Nyomtasson kontúr kerületeket két körben, folyamatosan, mint egy váza " +"módhoz. Működéséhez szükség van az external_perimeters_first paraméterre.\n" +"Az első rétegnél nem működik, mert túlságosan károsíthatja az ágyat.\n" +"Vegye figyelembe, hogy alapmagasságként a hardverbeállítások " +"min_layer_height-ját fogja használni (nem 0-val kezdődik), ezért ügyeljen " +"arra, hogy a nyomtató által kezelhető legalacsonyabb értéket adja meg. ha " +"nem kisebb, mint az aktuális rétegmagasság kétszerese, akkor visszaesik a " +"normál algoritmusra, mivel nincs elég hely két hurok megtételére." + +msgid "Only for outer side" +msgstr "Csak a külső oldalon" + +msgid "Ext peri first for outer side" +msgstr "Ext. ker. először a külső oldalra" msgid "" -"The number of top solid layers is increased above top_solid_layers if " -"necessary to satisfy minimum thickness of top shell. This is useful to " -"prevent pillowing effect when printing with variable layer height." +"Only do the vase trick on the external side. Useful when the thickness is " +"too low." msgstr "" -"A felső szilárd rétegek számát a top_solid_layers érték fölé lesz növelve, " -"amennyiben ez szükséges a felső héj minimális vastagságának kielégítéséhez.\n" -"Ez hasznos a változó rétegmagasságú nyomtatásnál a \" párnásodás\" effektus " -"elkerülése érdekében." +"A váza trükköt csak a külső oldalon végezze. Hasznos, ha a vastagság túl " +"kicsi." -msgid "The object is too small" -msgstr "Az objektum túl kicsi" +msgid "Only for inner side" +msgstr "Csak a belső oldalra" + +msgid "ext peri first for inner side" +msgstr "ext ker először a belső oldalhoz" msgid "" -"The object will be raised by this number of layers, and support material " -"will be generated under it." +"Only do the vase trick on the external side. Useful when you only want to " +"remove seam from screw hole." msgstr "" -"Az objektum ennyi réteggel megemeljük, és alatta támasztékot (tutaj) hozunk " -"létre." +"A váza trükköt csak a külső oldalon végezze. Akkor hasznos, ha csak a " +"varrást szeretné eltávolítani a csavarlyukból." + +msgid "Perimeters loop" +msgstr "Kerületi hurok" msgid "" -"The percentage of smaller pillars compared to the normal pillar diameter " -"which are used in problematic areas where a normal pilla cannot fit." +"Join the perimeters to create only one continuous extrusion without any z-" +"hop. Long inside travel (from external to holes) are not extruded to give " +"some space to the infill." msgstr "" -"A kisebb pillérek normál pillérek átmérőjéhez viszonyított aránya, amelyeket " -"olyan problémás helyeken használnak, ahol egy normál pillér nem fér el." +"Csatlakoztassa a kerületeket, hogy egyetlen folyamatos extrudálást hozzon " +"létre Z-hop nélkül. A hosszú belső út (a külsőtől a lyukakig) nincs " +"extrudálva, hogy némi teret adjon a kitöltésnek." + +msgid "Seam position" +msgstr "Varrás helyzete" + +msgid "Perimeter loop seam" +msgstr "Kerületi hurokvarrás" + +msgid "Position of perimeters starting points." +msgstr "A kerület kezdőpontjainak helyzete." + +msgid "Nearest" +msgstr "Legközelebb" + +msgid "filling horizontal gaps on slopes" +msgstr "vízszintes rések kitöltése lejtőkön" + +msgid "Extra perimeters (do nothing)" +msgstr "Extra kerületek (ne csinálj semmit)" msgid "" -"The percentage of the bed area. \n" -"If the print area exceeds the specified value, \n" -"then a slow tilt will be used, otherwise - a fast tilt" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported.\n" +"If you succeed in triggering the algorithm behind this setting, please send " +"me a message. Personally, I think it's useless." msgstr "" -"A tárgyasztalhoz viszonyított százalékos arány. \n" -"Ha a nyomtatott felület tárgyasztalhoz viszonyított százalékos aránya " -"meghaladja a megadott értéket, \n" -"akkor lassú billenés, ellenkező esetben gyors billenés fog történni" +"Ha szükséges, adjon hozzá további kerületeket, hogy elkerülje a rések " +"elkerülését a ferde falakban. A Slic3r folyamatosan bővíti a kerületeket, " +"amíg a fenti hurok több mint 70%-a nem támogatott.\n" +"Ha sikerül elindítani a beállítás mögötti algoritmust, kérjük, küldjön " +"üzenetet. Személy szerint szerintem felesleges." + +msgid "On overhangs" +msgstr "Túlnyúlásokon" + +msgid "Extra perimeters over overhangs" +msgstr "Extra kerületek a túlnyúlások felett" msgid "" -"The physical printer below is based on the preset, you are going to delete." -msgid_plural "" -"The physical printers below are based on the preset, you are going to delete." -msgstr[0] "" -"Az alábbi fizikai nyomtató azon az előbeállításon alapul, amelyet törölni " -"készül." -msgstr[1] "" -"Az alábbi fizikai nyomtatók azon az előbeállításon alapulnak, amelyet " -"törölni készül." +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters until all overhangs are filled.\n" +"!! this is a very slow algorithm !!\n" +"If you use this setting, strongly consider also using overhangs_reverse." +msgstr "" +"Ha szükséges, adjon hozzá további kerületeket, hogy elkerülje a rések " +"elkerülését a ferde falakban. A Slic3r folyamatosan bővíti a kerületeket, " +"amíg az összes túlnyúlást meg nem töltik.\n" +"!! ez egy nagyon lassú algoritmus!!\n" +"Ha ezt a beállítást használja, erősen fontolja meg az overhangs_reverse " +"használatát is." + +msgid "On odd layers" +msgstr "Páratlan rétegeken" + +msgid "Extra perimeter on odd layers" +msgstr "Extra kerület a páratlan rétegeken" msgid "" -"The physical printer below is based only on the preset, you are going to " -"delete." -msgid_plural "" -"The physical printers below are based only on the preset, you are going to " -"delete." -msgstr[0] "" -"Az alábbi fizikai nyomtató csak azon az előbeállításon alapul, amelyet " -"törölni készül." -msgstr[1] "" -"Az alábbi fizikai nyomtatók csak azon az előbeállításon alapulnak, amelyet " -"törölni készül." +"Add one perimeter every odd layer. With this, infill is taken into the " +"sandwich and you may be able to reduce drastically the infill/perimeter " +"overlap setting. " +msgstr "" +"Adjon hozzá egy kerületet minden páratlan réteghez. Ezzel a kitöltés bekerül " +"a szendvicsbe, és drasztikusan csökkentheti a kitöltés/kerület átfedés " +"beállítását " + +msgid "Only one perimeter on First layer" +msgstr "Csak egy kerület az első rétegen" msgid "" -"The places where the brim will be printed around each object on the first " -"layer." +"Use only one perimeter on first layer, to give more space to the top infill " +"pattern." msgstr "" -"Azok a helyek, ahol a karima az első réteg minden egyes objektuma köré " -"kinyomtatásra kerül." +"Csak egy kerületet használjon az első rétegen, hogy több hely maradjon a " +"felső kitöltési mintának." + +msgid "Only one perimeter on Top surfaces" +msgstr "Csak egy kerület a felső felületeken" msgid "" -"The preset below was temporarily installed on the active instance of " -"PrusaSlicer" -msgid_plural "" -"The presets below were temporarily installed on the active instance of " -"PrusaSlicer" -msgstr[0] "" -"Az alábbi_ előbeállítás ideiglenesen telepítve lett a PrusaSlicer aktív " -"példányára" -msgstr[1] "" -"Az alábbi_ előbeállítások ideiglenesen telepítve lettek a PrusaSlicer aktív " -"példányára" +"Use only one perimeter on flat top surface, to give more space to the top " +"infill pattern." +msgstr "" +"Csak egy kerületet használjon sík felső felületen, hogy több hely maradjon a " +"felső kitöltési mintának." -msgid "The preset modifications are successfully saved" -msgid_plural "The presets modifications are successfully saved" -msgstr[0] "Az előbeállítás módosításai sikeresen elmentésre kerültek" -msgstr[1] "Az előbeállítások módosításai sikeresen elmentésre kerültek" +msgid "Only one peri - other algo" +msgstr "Csak egy peri - másik algo" -msgid "The printer multiplexes filaments into a single hot end." -msgstr "A nyomtató a filamenteket egyetlen 'hot endbe' fűzi." +msgid "" +"If you have some problem with the 'Only one perimeter on Top surfaces' " +"option, you can try to activate this on the problematic layer." +msgstr "" +"Ha problémája van a „Csak egy kerület a felső felületeken” opcióval, akkor " +"megpróbálhatja aktiválni a problémás rétegen." -msgid "The provided file name is not valid." -msgstr "A megadott fájlnév érvénytelen." +msgid "" +"The extruder to use (unless more specific extruder settings are specified). " +"This value overrides perimeter and infill extruders, but not the support " +"extruders." +msgstr "" +"A használandó extruder (kivéve, ha konkrétabb extruderbeállítások vannak " +"megadva). Ez az érték felülírja a kerületi és kitöltő extrudereket, de nem a " +"támasztó extrudereket." -msgid "The provided name is not valid;" -msgstr "A megadott név érvénytelen;" +msgid "First layer extruder" +msgstr "Első rétegű extruder" msgid "" -"The selected 3MF contains FDM supports painted object using a newer version " -"of PrusaSlicer and is not compatible." +"The extruder to use (unless more specific extruder settings are specified) " +"for the first layer." msgstr "" -"A kiválasztott 3MF a PrusaSlicer újabb verziójával készült FDM támaszték " -"festett objektumot tartalmaz, és nem kompatibilis." +"Az első réteghez használandó extruder (hacsak nincsenek konkrétabb " +"extruderbeállítások megadva)." + +msgid "Extruder clearance height" +msgstr "Extruder szabad magassága" msgid "" -"The selected 3MF contains multi-material painted object using a newer " -"version of PrusaSlicer and is not compatible." +"Set this to the vertical distance between your nozzle tip and (usually) the " +"X carriage rods. In other words, this is the height of the clearance " +"cylinder around your extruder, and it represents the maximum depth the " +"extruder can peek before colliding with other printed objects." msgstr "" -"A kiválasztott 3MF a PrusaSlicer újabb verziójával készült, több anyagos " -"festett objektumot tartalmaz, és nem kompatibilis." +"Állítsa be ezt a fúvókacsúcs és (általában) az X kocsirudak közötti " +"függőleges távolságra. Más szóval, ez az extruder körüli távolsági henger " +"magassága, és ez jelenti azt a maximális mélységet, amelyet az extruder meg " +"tud nézni, mielőtt más nyomtatott objektumokkal ütközne." + +msgid "Extruder clearance radius" +msgstr "Extruder távolsági sugár" msgid "" -"The selected 3MF contains seam painted object using a newer version of " -"PrusaSlicer and is not compatible." +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the platter.\n" +"Set zero to disable clearance checking." msgstr "" -"A kiválasztott 3MF a PrusaSlicer egy újabb verziójával készült varrat " -"festett objektumot tartalmaz, és nem kompatibilis." +"Állítsa ezt az extruder körüli távolságra. Ha az extruder nincs középre " +"állítva, a biztonság érdekében válassza a legnagyobb értéket. Ez a beállítás " +"az ütközések ellenőrzésére és a grafikus előnézet megjelenítésére szolgál a " +"tányéron.\n" +"Állítsa nullára a távolságellenőrzés letiltásához." -msgid "The selected file" -msgstr "A kiválasztott fájl" +msgid "Extruder Color" +msgstr "Extruder színe" -msgid "The selected file contains no geometry." -msgstr "A kiválasztott fájl nem tartalmaz geometriát." +msgid "This is only used in Slic3r interface as a visual help." +msgstr "Ezt csak a Slic3r felületen használják vizuális segítségként." + +msgid "Extruder offset" +msgstr "Extruder eltolás" msgid "" -"The selected file contains several disjoint areas. This is not supported." +"If your firmware doesn't handle the extruder displacement you need the G-" +"code to take it into account. This option lets you specify the displacement " +"of each extruder with respect to the first one. It expects positive " +"coordinates (they will be subtracted from the XY coordinate)." msgstr "" -"A kiválasztott fájl több szétválasztott területet tartalmaz. Ez nem " -"támogatott." +"Ha a firmware nem kezeli az extruder elmozdulását, szüksége van a G-kódra, " +"hogy figyelembe vegye. Ezzel az opcióval megadhatja az egyes extruderek " +"elmozdulását az elsőhöz képest. Pozitív koordinátákat vár (ezeket kivonják " +"az XY koordinátából)." + +msgid "Extruder temp offset" +msgstr "Extruder hőmérséklet-eltolás" msgid "" -"The selected object couldn't be split because it contains only one part." +"This offset will be added to all extruder temperatures set in the filament " +"settings.\n" +"Note that you should set 'M104 S{first_layer_temperature{initial_extruder} + " +"extruder_temperature_offset{initial_extruder}}'\n" +"instead of 'M104 S{first_layer_temperature}' in the start_gcode" msgstr "" -"A kijelölt objektumot nem lehetett felbontani, mert csak egy alkatrészt " -"tartalmaz." +"Ez az eltolás hozzáadódik az izzószál-beállításokban beállított összes " +"extruder-hőmérséklethez.\n" +"Vegye figyelembe, hogy az „M104 S{first_layer_temperature{initial_extruder} " +"+ extruder_temperature_offset{initial_extruder}}” értéket kell beállítania.\n" +"az „M104 S{first_layer_temperature}” helyett a start_gcode-ban" + +msgid "Extruder fan offset" +msgstr "Extruder ventilátor eltolás" msgid "" -"The selected object couldn't be split because it contains only one solid " -"part." +"This offset wil be added to all fan values set in the filament properties. " +"It won't make them go higher than 100% nor lower than 0%." msgstr "" -"A kijelölt objektumot nem lehetett szétválasztani, mert csak egy szilárd " -"alkatrészt tartalmaz." +"Ez az eltolás hozzáadódik a nyomtatószál tulajdonságaiban beállított összes " +"ventilátorértékhez. Ez nem fogja őket 100%-nál magasabbra és 0%-nál " +"alacsonyabbra állítani." + +msgid "Extrusion axis" +msgstr "Extrudáló tengely" msgid "" -"The selected project is no longer available.\n" -"Do you want to remove it from the recent projects list?" +"Use this option to set the axis letter associated with your printer's " +"extruder (usually E but some printers use A)." msgstr "" -"A kiválasztott projekt már nem elérhető.\n" -"El szeretné távolítani a legutóbbi projektek listájáról?" +"Ezzel a lehetőséggel állíthatja be a nyomtató extruderéhez tartozó " +"tengelybetűt (általában E, de egyes nyomtatók A betűt használnak)." + +msgid "Extrusion multiplier" +msgstr "Extrudálási szorzó" msgid "" -"The sequential print is on.\n" -"It's impossible to apply any custom G-code for objects printing sequentually." +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 0.9 and 1.1. If you think you need to change this " +"more, check filament diameter and your firmware E steps." msgstr "" -"A szekvenciális nyomtatás aktív.\n" -"Ilyenkor nem lehet az objektumokhoz egyéni G-kódot adni." +"Ez a tényező arányosan változtatja az áramlás mennyiségét. Lehet, hogy ezt a " +"beállítást finomítani kell a szép felületkezelés és a megfelelő egyfalú " +"szélesség eléréséhez. A szokásos értékek 0,9 és 1,1 között vannak. Ha úgy " +"gondolja, hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament " +"átmérőt és a firmware E lépéseket." msgid "" -"The sequential print is on.\n" -"It's impossible to apply any custom G-code for objects printing " -"sequentually.\n" -"This code won't be processed during G-code generation." +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 90% and 110%. If you think you need to change this " +"more, check filament diameter and your firmware E steps. This print setting " +"is multiplied against the extrusion_multiplier from the filament tab. Its " +"only purpose is to offer the same functionality but on a per-object basis." +msgstr "" +"Ez a tényező arányosan változtatja az áramlás mennyiségét. Lehet, hogy ezt a " +"beállítást finomítani kell a szép felületkezelés és a megfelelő egyfalú " +"szélesség eléréséhez. A szokásos értékek 90% és 110% között vannak. Ha úgy " +"gondolja, hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament " +"átmérőjét és a firmware E lépéseit. Ezt a nyomtatási beállítást megszorozzuk " +"a filament fül extrusion_multiplier értékével. Egyetlen célja, hogy ugyanazt " +"a funkciót kínálja, de objektumonként." + +msgid "Default extrusion width" +msgstr "Alapértelmezett extrudálási szélesség" + +msgid "" +"This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width " +"fields. It's useless when all other width fields have a value.Set this to a " +"non-zero value to allow a manual extrusion width. If left to zero, Slic3r " +"derives extrusion widths from the nozzle diameter (see the tooltips for " +"perimeter extrusion width, infill extrusion width etc). If expressed as " +"percentage (for example: 105%), it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Ez a DEFAULT extrudálási szélesség. CSAK a 0 szélességű mezők Pótlására " +"használható. Használhatatlan, ha az összes többi szélességi mezőnek van " +"értéke.Állítsa be ezt a mezőt nem nulla értékre, hogy lehetővé tegye a " +"manuális extrudálási szélességet. Ha nullán hagyja, a Slic3r a fúvóka " +"átmérőjéből származtatja az extrudálás szélességét (lásd a perem extrudálás " +"szélességére, a kitöltő extrudálás szélességére stb. vonatkozó " +"eszköztanácsokat). Ha százalékban van megadva (például: 105%), akkor a " +"fúvóka átmérője fölött lesz kiszámítva.\n" +"Beállíthatja a 'Spacing' (távolság) vagy a 'Width' (szélesség) értéket; a " +"másik értéket a perem 'Overlap' (átfedés) százalékos értékei és az " +"alapértelmezett rétegmagasság alapján számítja ki." + +msgid "Default extrusion spacing" +msgstr "Alapértelmezett extrudálási távolság" + +msgid "" +"This is the DEFAULT extrusion spacing. It's convert to a width and this " +"width can be used to REPLACE 0-width fields. It's useless when all width " +"fields have a value.Like Default extrusion width but spacing is the distance " +"between two lines (as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Ez a DEFAULT extrudálási távolság. Szélességgé konvertálódik, és ez a " +"szélesség használható a 0 szélességű mezők Pótlására. Használhatatlan, ha " +"minden szélesség mezőnek van értéke. mint az alapértelmezett extrudálási " +"szélesség, de a távolság a két vonal közötti távolság (mivel egy kicsit " +"átfedik egymást, ez nem ugyanaz).\n" +"Vagy a 'Spacing', vagy a 'Width' értéket állíthatod be; a másikat a rendszer " +"kiszámítja, a perem 'Overlap' százalékos értékeit és az alapértelmezett " +"rétegmagasságot használva." + +msgid "Keep fan always on" +msgstr "Tartsa a ventilátort mindig bekapcsolva" + +msgid "" +"If this is enabled, fan will continuously run at base speed if no other " +"setting overrides that speed. Useful for PLA, harmful for ABS." +msgstr "" +"Ha ez engedélyezve van, a ventilátor folyamatosan az alapsebességen fog " +"működni, ha nincs más beállítás, amely felülírja ezt a sebességet. Hasznos " +"PLA esetén, káros ABS esetén." + +msgid "Enable fan if layer print time is below" +msgstr "A ventilátor engedélyezése, ha a réteg nyomtatási ideje" + +msgid "" +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the default and " +"maximum speeds.\n" +"Set zero to disable." +msgstr "" +"Ha a rétegnyomtatási idő becsült értéke ez alatt a másodpercszám alatt van, " +"a ventilátor bekapcsol, és a sebességét az alapértelmezett és a maximális " +"sebesség interpolálásával számítja ki.\n" +"A kikapcsoláshoz állítsa be a nullát." + +msgid "approximate seconds" +msgstr "megközelítőleg másodpercek" + +msgid "Filament color" +msgstr "Nyomtatószál színe" + +msgid "This is only used in the Slic3r interface as a visual help." +msgstr "Ezt csak a Slic3r felületén használjuk vizuális segítségként." + +msgid "Custom variables" +msgstr "Egyéni változók" + +msgid "Custom Filament variables" +msgstr "Egyedi nyomtatószál változók" + +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. The variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"These variables will be available as an array in the custom gcode (one item " +"per extruder), don't forget to use them with the {current_extruder} index to " +"get the current value. If a filament has a typo on the variable that change " +"its type, then the parser will convert evrything to strings.\n" +"Advice: before using a variable, it's safer to use the function " +"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " +"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " +"'string'." +msgstr "" +"Hozzáadhatja az egyéni kódú makrókhoz elérhető adatokat.\n" +"Minden sorban egy változót definiálhat.\n" +"A formátum 'változó_név=érték'. A változó neve csak [a-zA-Z0-9] karaktereket " +"vagy '_' betűket tartalmazhat.\n" +"Az int vagy float értékként elemezhető érték numerikus értékként lesz " +"elérhető.\n" +"A dupla idézőjelekbe zárt értékek (idézőjelek nélkül) karakterláncként " +"lesznek elérhetőek.\n" +"A csak 'true' vagy 'false' értéket felvevők értékek boolean értékek " +"lesznek.)\n" +"Minden más értéket stringként elemezünk, ahogy van.\n" +"Ezek a változók tömbként lesznek elérhetőek az egyéni gkódban " +"(extruderenként egy elem), ne felejtsd el használni őket a " +"{current_extruder} indexszel, hogy megkapd az aktuális értéket. Ha egy " +"szálon elírás van a változóban, ami megváltoztatja a típusát, akkor az " +"elemző mindent stringre fog konvertálni.\n" +"Tanács: Mielőtt használsz egy változót, biztonságosabb az " +"'default_XXX(variable_name, default_value)' függvényt használni (zárójelbe " +"zárva, mivel ez egy szkript) arra az esetre, ha nincs beállítva. Az XXX " +"helyettesíthető 'int' 'bool' 'double' 'string' értékkel." + +msgid "Filament notes" +msgstr "Nyomtatószál jegyzetek" + +msgid "You can put your notes regarding the filament here." +msgstr "Ide teheti fel jegyzeteit a nyomtatószálról." + +msgid "Max speed" +msgstr "Max sebesség" + +msgid "" +"Maximum speed allowed for this filament. Limits the maximum speed of a print " +"to the minimum of the print speed and the filament speed. Set zero for no " +"limit." +msgstr "" +"A maximális megengedett sebesség ennél az izzószálnál. A nyomtatás maximális " +"sebességét a nyomtatási sebesség és a szálsebesség minimumára korlátozza. A " +"korlátozás nélküli értéket nullára állítja." + +msgid "Max volumetric speed" +msgstr "Maximális térfogati sebesség" + +msgid "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set zero for no limit." +msgstr "" +"A maximális megengedett térfogatsebesség ennél az izzószálnál. A nyomtatás " +"maximális térfogatsebességét a nyomtatási és a szálak térfogatsebességének " +"minimumára korlátozza. A korlátozás nélküli érték nulla." + +msgid "Max speed on the wipe tower" +msgstr "Maximális sebesség a törlőtornyon" + +msgid "" +"This setting is used to set the maximum speed when extruding inside the wipe " +"tower (use M220). In %, set 0 to disable and use the Filament type instead.\n" +"If disabled, these filament types will have a defaut value of:\n" +" - PVA: 80% to 60%\n" +" - SCAFF: 35%\n" +" - FLEX: 35%\n" +" - OTHERS: 100%\n" +"Note that the wipe tower reset the speed at 100% for the unretract in any " +"case.\n" +"If using marlin, M220 B/R is used to save the speed override before the wipe " +"tower print." +msgstr "" +"Ez a beállítás a maximális sebesség beállítására szolgál a törlőtoronyban " +"történő extrudáláskor (használja az M220-at). A %-ban állítsa be a 0 értéket " +"a letiltáshoz, és használja helyette a Filament type (Szál típus) értéket.\n" +"Ha ki van kapcsolva, ezek a szál típusok defaut értéket kapnak:\n" +" - PVA: 80% és 60% között\n" +" - SCAFF: 35%\n" +" - FLEX: 35%\n" +" - EGYÉB: 100%\n" +"Vegye figyelembe, hogy a törlőtorony minden esetben 100%-ra állítja vissza a " +"sebességet a visszahúzásnál.\n" +"Marlin használata esetén az M220 B/R-t kell használni a sebesség " +"felülírásának mentésére a törlőtorony nyomtatása előtt." + +msgid "Loading speed" +msgstr "Betöltési sebesség" + +msgid "Speed used for loading the filament on the wipe tower. " +msgstr "" +"Az izzószálnak a törlőtoronyba történő betöltéséhez használt sebesség. " + +msgid "Toolchange temperature enabled" +msgstr "Fejcsere hőmérséklet engedélyezve" + +msgid "Determines whether toolchange temperatures will be applied" +msgstr "" +"Meghatározza, hogy a szerszámcsere hőmérsékletek alkalmazásra kerülnek-e" + +msgid "Fast mode" +msgstr "Gyors mód" + +msgid "" +"Experimental: drops nozzle temperature during cooling moves instead of prior " +"to extraction to reduce wait time." +msgstr "" +"Kísérleti: a várakozási idő csökkentése érdekében a fúvóka hőmérsékletét a " +"hűtési mozgások során, nem pedig a kivonás előtt csökkenti." + +msgid "Use part fan to cool hotend" +msgstr "Használjon részventilátort a hotend hűtéséhez" + +msgid "" +"Experimental setting. May enable the hotend to cool down faster during " +"toolchanges" +msgstr "" +"Kísérleti környezet. Lehetővé teheti a nozzle gyorsabb lehűlését a " +"szerszámcserék során" + +msgid "Toolchange part fan speed" +msgstr "Szerszámcsere tárgyhűtő sebessége" + +msgid "" +"Experimental setting. Fan speeds that are too high can clash with the " +"hotend's PID routine." +msgstr "" +"Kísérleti környezet. A túl magas ventilátorsebesség összeütközésbe kerülhet " +"a fűtőberendezés PID rutinjával." + +msgid "Enable Skinnydip string reduction" +msgstr "Skinnydip húrcsökkentés engedélyezése" + +msgid "" +"Skinnydip performs a secondary dip into the meltzone to burn off fine " +"strings of filament" +msgstr "" +"A Skinnydip másodlagos merítést végez az olvadékzónába a finom szálak " +"leégetése érdekében" + +msgid "Pause in melt zone" +msgstr "Szünet az olvadási zónában" + +msgid "" +"Stay in melt zone for this amount of time before extracting the filament. " +"Not usually necessary." +msgstr "" +"Maradjon az olvadási zónában ennyi ideig, mielőtt kihúzza az izzószálat. " +"Általában nem szükséges." + +msgid "milliseconds" +msgstr "ezredmásodperc" + +msgid "Pause before extraction " +msgstr "Szünet a kihúzás előtt " + +msgid "" +"Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily " +"needed" +msgstr "" +"Hasznos lehet annak elkerülésére, hogy a bondtech fogaskerekek deformálják a " +"forró hegyeket, de általában nincs rá szükség" + +msgid "Speed to move into melt zone" +msgstr "Az olvadási zónába való belépés sebessége" + +msgid "usually not necessary to change this" +msgstr "általában nem szükséges ezt megváltoztatni" + +msgid "mm/sec" +msgstr "mm/mp" + +msgid "Speed to extract from melt zone" +msgstr "Az olvadási zónából való kiemelés sebessége" + +msgid "Toolchange temperature" +msgstr "Fejcsere hőmérséklet" + +msgid "" +"To further reduce stringing, it can be helpful to set a lower temperature " +"just prior to extracting filament from the hotend." +msgstr "" +"A felfűzés további csökkentése érdekében hasznos lehet alacsonyabb " +"hőmérsékletet beállítani közvetlenül a fűtőfejből való kivonás előtt." + +msgid "Insertion distance" +msgstr "Beillesztési távolság" + +msgid "" +"For stock extruders, usually 40-42mm. For bondtech extruder upgrade, " +"usually 30-32mm. Start with a low value and gradually increase it until " +"strings are gone. If there are blobs on your wipe tower, your value is too " +"high." +msgstr "" +"A készleten lévő extrudereknél általában 40-42 mm. Bondtech extruder " +"upgrade esetén általában 30-32 mm. Kezdje alacsony értékkel, és fokozatosan " +"növelje, amíg a szálak el nem tűnnek. Ha pacák vannak a törlőtornyon, akkor " +"az érték túl magas." + +msgid "Loading speed at the start" +msgstr "Betöltési sebesség induláskor" + +msgid "Speed used at the very beginning of loading phase. " +msgstr "A betöltési fázis legelején használt sebesség. " + +msgid "Unloading speed" +msgstr "Kiadási sebesség" + +msgid "" +"Speed used for unloading the filament on the wipe tower (does not affect " +"initial part of unloading just after ramming). " +msgstr "" +"A nyomtatószálnak törlőtoronyra történő kiadásához használt sebesség (nem " +"befolyásolja a kiadás kezdeti részét közvetlenül a döngölés után). " + +msgid "Unloading speed at the start" +msgstr "Kiadási sebesség induláskor" + +msgid "" +"Speed used for unloading the tip of the filament immediately after ramming. " +msgstr "" +"A nyomtatószál hegyének azonnali döngölés utáni tehermentesítésére használt " +"sebesség " + +msgid "Delay after unloading" +msgstr "Késés a kiadás után" + +msgid "" +"Time to wait after the filament is unloaded. May help to get reliable " +"toolchanges with flexible materials that may need more time to shrink to " +"original dimensions. " +msgstr "" +"Várakozási idő az izzószál kitöltése után. Segíthet megbízható " +"szerszámcserékhez jutni olyan rugalmas anyagok esetében, amelyeknek több " +"időre van szükségük ahhoz, hogy az eredeti méretre zsugorodjanak. " + +msgid "Number of cooling moves" +msgstr "Hűtési mozgások száma" + +msgid "" +"Filament is cooled by being moved back and forth in the cooling tubes. " +"Specify desired number of these moves." +msgstr "" +"A nyomtatószálat a hűtőcsövekben előre-hátra mozgatva hűtik. Adja meg ezen " +"mozgások kívánt számát." + +msgid "Speed of the first cooling move" +msgstr "Az első hűtési lépés sebessége" + +msgid "Cooling moves are gradually accelerated, starting at this speed. " +msgstr "A hűtési mozgások fokozatos gyorsulása, ezzel a sebességgel indulnak. " + +msgid "Minimal purge on wipe tower" +msgstr "Minimális öblítés a törlőtoronyon" + +msgid "" +"After a tool change, the exact position of the newly loaded filament inside " +"the nozzle may not be known, and the filament pressure is likely not yet " +"stable. Before purging the print head into an infill or a sacrificial " +"object, Slic3r will always prime this amount of material into the wipe tower " +"to produce successive infill or sacrificial object extrusions reliably." +msgstr "" +"Szerszámcsere után előfordulhat, hogy az újonnan betöltött nyomtatószál " +"pontos helyzete a fúvókán belül nem ismert, és a nyomtatószál nyomása " +"valószínűleg még nem stabil. Mielőtt a nyomtatófejet egy kitöltésbe vagy egy " +"feláldozható tárgyba öblítené, a Slic3r mindig ezt az anyagmennyiséget " +"alapozza a törlőtoronyba, hogy megbízhatóan hozzon létre egymás utáni " +"kitöltéseket vagy áldozati tárgyak extrudálásait." + +msgid "mm³" +msgstr "mm³" + +msgid "Speed of the last cooling move" +msgstr "Az utolsó hűtési lépés sebessége" + +msgid "Cooling moves are gradually accelerated towards this speed. " +msgstr "A hűtési mozgások fokozatosan felgyorsulnak erre a sebességre " + +msgid "Filament load time" +msgstr "Izzószál betöltési ideje" + +msgid "" +"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " +"filament during a tool change (when executing the T code). This time is " +"added to the total print time by the G-code time estimator." +msgstr "" +"Az idő, amíg a nyomtató firmware-je (vagy a Multi Material Unit 2.0) új " +"izzószálat tölt be a szerszámcsere során (a T kód végrehajtásakor). Ezt az " +"időt a G-kód időbecslő hozzáadja a teljes nyomtatási időhöz." + +msgid "Ramming parameters" +msgstr "Döngölési paraméterek" + +msgid "" +"This string is edited by RammingDialog and contains ramming specific " +"parameters." +msgstr "" +"Ezt a karakterláncot a RammingDialog szerkeszti, és a döngölésre jellemző " +"paramétereket tartalmazza." + +msgid "Filament unload time" +msgstr "Szál kiadási idő" + +msgid "" +"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " +"filament during a tool change (when executing the T code). This time is " +"added to the total print time by the G-code time estimator." +msgstr "" +"Az az idő, amíg a nyomtató firmware (vagy a Multi Material Unit 2.0) " +"szerszámcsere közben (a T kód végrehajtásakor) kitölti a szálat. Ezt az időt " +"a G-kód időbecslője hozzáadja a teljes nyomtatási időhöz." + +msgid "" +"Enter your filament diameter here. Good precision is required, so use a " +"caliper and do multiple measurements along the filament, then compute the " +"average." +msgstr "" +"Adja meg itt az izzószál átmérőjét. Jó pontosságra van szükség, ezért " +"használjon mérőkalapácsot, és végezzen több mérést a szál mentén, majd " +"számítsa ki az átlagot." + +msgid "Shrinkage" +msgstr "Zsugorodás" + +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling " +"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"compensate. Only the filament used for the perimeter is taken into account.\n" +"Be sure to allow enough space between objects, as this compensation is done " +"after the checks." +msgstr "" +"Adja meg azt a zsugorodási százalékot, amelyet a szál hűtés után kap (94%, " +"ha 100 mm helyett 94 mm-t mér). Az alkatrész xy-ban skálázódik, hogy " +"kompenzálja ezt. Csak a kerülethez használt filament kerül figyelembe " +"vételre.\n" +"Ügyeljen arra, hogy elegendő helyet hagyjon az objektumok között, mivel ez a " +"kompenzáció az ellenőrzések után történik." + +msgid "Max line overlap" +msgstr "Max vonalátfedés" + +msgid "" +"This setting will ensure that all 'overlap' are not higher than this value. " +"This is useful for filaments that are too viscous, as the line can't flow " +"under the previous one." +msgstr "" +"Ez a beállítás biztosítja, hogy az összes \"átfedés\" ne legyen nagyobb " +"ennél az értéknél. Ez a túlságosan viszkózus szálaknál hasznos, mivel a " +"vonal nem tud az előző alatt folyni." + +msgid "Density" +msgstr "Sűrűség" + +msgid "" +"Enter your filament density here. This is only for statistical information. " +"A decent way is to weigh a known length of filament and compute the ratio of " +"the length to volume. Better is to calculate the volume directly through " +"displacement." +msgstr "" +"Adja meg itt a nyomtatószál sűrűségét. Ez csak statisztikai információ. Egy " +"tisztességes módszer, ha egy ismert hosszúságú szálat megmérünk, és " +"kiszámítjuk a hossz és a térfogat arányát. Jobb, ha a térfogatot közvetlenül " +"az elmozduláson keresztül számítja ki." + +msgid "g/cm³" +msgstr "g/cm³" + +msgid "Filament type" +msgstr "Szál típusa" + +msgid "The filament material type for use in custom G-codes." +msgstr "Az egyéni G-kódokban használt nyomtatószál típusa." + +msgid "Soluble material" +msgstr "Oldható anyag" + +msgid "Soluble material is most likely used for a soluble support." +msgstr "Az oldható anyagot valószínűleg oldható hordozónak használják." + +msgid "Filament cost" +msgstr "Szál költség" + +msgid "" +"Enter your filament cost per kg here. This is only for statistical " +"information." +msgstr "" +"Adja meg itt a fonal kilogrammonkénti költségét. Ez csak statisztikai " +"információként szolgál." + +msgid "money/kg" +msgstr "pénz/kg" + +msgid "Spool weight" +msgstr "Tekercs súlya" + +msgid "" +"Enter weight of the empty filament spool. One may weigh a partially consumed " +"filament spool before printing and one may compare the measured weight with " +"the calculated weight of the filament with the spool to find out whether the " +"amount of filament on the spool is sufficient to finish the print." +msgstr "" +"Adja meg az üres fonalspulni súlyát. A nyomtatás előtt megmérhetjük a " +"részben elfogyasztott szálspirált, és összehasonlíthatjuk a mért súlyt az " +"orsón lévő szál számított súlyával, hogy megtudjuk, elegendő-e az orsón lévő " +"szál mennyisége a nyomtatás befejezéséhez." + +msgid "(Unknown)" +msgstr "(Ismeretlen)" + +msgid "Fill" +msgstr "Kitöltés" + +msgid "Fill angle" +msgstr "Kitöltési szög" + +msgid "" +"Default base angle for infill orientation. Cross-hatching will be applied to " +"this. Bridges will be infilled using the best direction Slic3r can detect, " +"so this setting does not affect them." +msgstr "" +"Alapértelmezett alapszög a kitöltés tájolásához. Erre kereszt-sorozat lesz " +"alkalmazva. A hidak a Slic3r által legjobban érzékelt irányban lesznek " +"kitöltve, így ez a beállítás nem befolyásolja őket." + +msgid "Fill angle increment" +msgstr "Kitöltési szög növekedése" + +msgid "" +"Add this angle each layer to the base angle for infill. May be useful for " +"art, or to be sure to hit every object's feature even with very low infill. " +"Still experimental, tell me what makes it useful, or the problems that arise " +"using it." +msgstr "" +"Adja hozzá ezt a szöget minden rétegben a kitöltés alapszögéhez. Hasznos " +"lehet a művészethez, vagy ahhoz, hogy biztosan eltalálja minden objektum " +"jellemzőjét, még nagyon alacsony kitöltés esetén is. Még kísérleti, mondd " +"el, mitől lesz hasznos, vagy milyen problémák merülnek fel a használatával." + +msgid "Fill density" +msgstr "Kitöltési sűrűség" + +msgid "Density of internal infill, expressed in the range 0% - 100%." +msgstr "A belső kitöltés sűrűsége, 0% és 100% között kifejezve." + +msgid "Fill pattern" +msgstr "Kitöltési minta" + +msgid "Fill pattern for general low-density infill." +msgstr "Kitöltési minta általános kis sűrűségű kitöltéshez." + +msgid "Grid" +msgstr "Rács" + +msgid "Triangles" +msgstr "Háromszög" + +msgid "Stars" +msgstr "Csillag" + +msgid "Cubic" +msgstr "Kocka" + +msgid "Line" +msgstr "Vonal" + +msgid "Honeycomb" +msgstr "Méhsejt" + +msgid "3D Honeycomb" +msgstr "3D Méhsejt" + +msgid "Gyroid" +msgstr "Giroid" + +msgid "Scattered Rectilinear" +msgstr "Elszórt egyenes vonalú" + +msgid "Adaptive Cubic" +msgstr "Adaptív kocka" + +msgid "Support Cubic" +msgstr "Támaszték kocka" + +msgid "Top fill" +msgstr "Felső kitöltés" + +msgid "Top fill flow ratio" +msgstr "Felső kitöltési áramlási arány" + +msgid "" +"You can increase this to over-extrude on the top layer if there is not " +"enough plastic to make a good fill." +msgstr "" +"Ezt növelheti, hogy a felső réteget túlnyomja, ha nincs elég műanyag a jó " +"kitöltéshez." + +msgid "First layer" +msgstr "Első réteg" + +msgid "First layer flow ratio" +msgstr "Első réteg áramlási aránya" + +msgid "" +"You can increase this to over-extrude on the first layer if there is not " +"enough plastic because your bed isn't levelled.\n" +"Note: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED! " +"Use this setting only as last resort after all calibrations failed." +msgstr "" +"Ezt növelheti az első réteg túlnyomó részének, ha nincs elég műanyag, mert " +"az ágya nincs kiegyenlítve.\n" +"Megjegyzés: NE HASZNÁLJA EZT, ha az egyetlen problémája az ágy " +"kiegyenlítése, KIEGYENLÍTENI AZ ÁGYAT! Ezt a beállítást csak végső " +"megoldásként használja, miután minden kalibráció sikertelen volt." + +msgid "XY First layer compensation" +msgstr "XY Első réteg kompenzáció" + +msgid "" +"The first layer will be grown / shrunk in the XY plane by the configured " +"value to compensate for the 1st layer squish aka an Elephant Foot effect. " +"(should be negative = inwards)" +msgstr "" +"Az első réteg az XY síkban a beállított értékkel növekszik/zsugorodik, hogy " +"kompenzálja az 1. réteg összenyomódását, azaz az Elefántláb-effektust. " +"(negatívnak kell lennie = befelé)" + +msgid "height in layers" +msgstr "magasság rétegenként" + +msgid "XY First layer compensation height in layers" +msgstr "XY Első rétegkompenzáció magassága rétegekben" + +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be gradually shrunk less, up to the layer indicated by " +"this value." +msgstr "" +"Azon rétegek száma, amelyeken az elefántláb-kompenzáció aktív lesz. Az első " +"réteg az elefántláb-kompenzáció értékével zsugorodik, majd a következő " +"rétegek fokozatosan kisebbre zsugorodnak, egészen az ezen érték által " +"megadott rétegig." + +msgid "Ironing width" +msgstr "Vasalási szélesség" + +msgid "" +"This is the width of the ironing pass, in a % of the top infill extrusion " +"width, should not be more than 50% (two times more lines, 50% overlap). It's " +"not necessary to go below 25% (four times more lines, 75% overlap). \n" +"If you have problems with your ironing process, don't forget to look at the " +"flow->above bridge flow, as this setting should be set to min 110% to let " +"you have enough plastic in the top layer. A value too low will make your " +"extruder eat the filament." +msgstr "" +"Ez a nyomtatási menet szélessége, a felső kitöltés extrudálás szélességének " +"%-ában, nem lehet több mint 50% (kétszer több vonal, 50%-os átfedés). Nem " +"szükséges 25% alá menni (négyszer több vonal, 75%-os átfedés). \n" +"Ha problémái vannak a vasalással, ne felejtse el megnézni a áramlás->híd " +"feletti áramlás-t, mivel ezt a beállítást min. 110%-ra kell állítani, hogy " +"elegendő műanyag legyen a felső rétegben. A túl alacsony értéktől az " +"extruder megeszi a filamentet." + +msgid "Distribution" +msgstr "Forgalmazás" + +msgid "Ironing flow distribution" +msgstr "Vasalási áramlás eloszlása" + +msgid "" +"This is the percentage of the flow that is used for the second ironing pass. " +"Typical 10-20%. Should not be higher than 20%, unless you have your top " +"extrusion width greatly superior to your nozzle width. A value too low and " +"your extruder will eat the filament. A value too high and the first pass " +"won't print well." +msgstr "" +"Ez az áramlásnak az a százaléka, amelyet a második nyomtatási menetre " +"használnak fel. Általában 10-20%. Nem lehet 20%-nál nagyobb, kivéve, ha a " +"felső extrudálás szélessége jóval nagyobb, mint a fúvóka szélessége. Egy túl " +"alacsony érték és az extruder megeszi a szálakat. Túl magas érték esetén az " +"első menet nem fog jól nyomtatni." + +msgid "First layer acceleration" +msgstr "Első réteg gyorsulás" + +msgid "" +"This is the acceleration your printer will use for first layer.\n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for first layer." +msgstr "" +"Ez az a gyorsulás, amelyet a nyomtató az első réteghez használ.\n" +"Lehet az alapértelmezett gyorsítás %-ában\n" +"A nulla beállítással az első réteg gyorsításvezérlése letiltható." + +msgid "First layer bed temperature" +msgstr "Első réteg ágyhőmérséklet" + +msgid "" +"Heated build plate temperature for the first layer. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Fűtött építőlemez hőmérséklete az első réteghez. Állítsa nullára az " +"ágyhőmérséklet-szabályozó parancsok letiltásához a kimeneten." + +msgid "First layer width" +msgstr "Első réteg szélessége" + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 140%) it will be computed over the " +"nozzle diameter of the nozzle used for the type of extrusion. If set to " +"zero, it will use the default extrusion width.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Az első réteg kézi extrudálási szélességének beállításához állítsa be ezt a " +"nem nulla értékre. Ezzel vastagabb extrudátumokat kényszeríthet a jobb " +"tapadás érdekében. Ha százalékban van megadva (például 140%), akkor az " +"értéket az extrudálás típusához használt fúvóka fúvókaátmérőjére kell " +"számítani. Ha nullára van állítva, akkor az alapértelmezett extrudálási " +"szélességet használja.\n" +"Beállíthatja a 'Spacing' (Távolság) vagy a 'Width' (Szélesség) értéket; a " +"másik értéket a perem 'Overlap' (Átfedés) százalékos értékei és az " +"alapértelmezett rétegmagasság alapján számítja ki." + +msgid "First layer spacing" +msgstr "Első réteg távolsága" + +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Mint az Első réteg szélessége, de a távolság a két sor közötti távolság " +"(mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Spacing' vagy a 'Width' értéket állíthatod be; a másik értéket a perem " +"'Overlap' százalékos értékei és az alapértelmezett rétegmagasság alapján " +"számítja ki a rendszer." + +msgid "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 75%) over the lowest nozzle diameter used in by the object." +msgstr "" +"Ha nagyon alacsony rétegmagassággal nyomtat, akkor is érdemes lehet " +"vastagabb alsó réteget nyomtatni, hogy javítsa a tapadást és a nem tökéletes " +"építőlemezek toleranciáját. Ez kifejezhető abszolút értékként vagy " +"százalékban (például: 75%) az objektum által használt legkisebb " +"fúvókaátmérőhöz képest." + +msgid "Default first layer speed" +msgstr "Alapértelmezett első réteg sebessége" + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum to all the print moves (but infill) of the first layer.\n" +"If expressed as a percentage it will scale the current speed.\n" +"Set it at 100% to remove any first layer speed modification (but for infill)." +msgstr "" +"Ha abszolút értékként van megadva mm/mp-ben, akkor ez a sebesség az első " +"réteg minden nyomtatási műveletére (kivéve a kitöltést) maximálisan " +"érvényes.\n" +"Ha százalékban van megadva, akkor az aktuális sebességet skálázza.\n" +"Ha 100%-ra állítja be, akkor az első réteg sebességének módosítása megszűnik " +"(kivéve a kitöltésnél)." + +msgid "Max infill" +msgstr "Max kitöltés" + +msgid "Infill max first layer speed" +msgstr "Kitöltés max első réteg sebessége" + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum for all infill print moves of the first layer.\n" +"If expressed as a percentage it will scale the current infill speed.\n" +"Set it at 100% to remove any infill first layer speed modification.\n" +"Set zero to disable (using first_layer_speed instead)." +msgstr "" +"Ha abszolút értékként van megadva mm/mp-ben, akkor ez a sebesség az első " +"réteg összes kitöltési nyomtatási mozgására maximális értékként kerül " +"alkalmazásra.\n" +"Ha százalékos értékként van megadva, akkor az aktuális kitöltési sebességet " +"skálázza.\n" +"Ha 100%-ra állítja be, akkor az első réteg kitöltési sebességének módosítása " +"megszűnik.\n" +"Ha nullára állítja, akkor letiltja (helyette a first_layer_speed-et " +"használja)." + +msgid "Min first layer speed" +msgstr "Min. első réteg sebessége" + +msgid "" +"Minimum speed when printing the first layer.\n" +"Set zero to disable." +msgstr "" +"Minimális sebesség az első réteg nyomtatásakor.\n" +"A letiltáshoz állítsa nullára." + +msgid "First layer nozzle temperature" +msgstr "Első réteg fúvókahőmérséklet" + +msgid "" +"Extruder nozzle temperature for first layer. If you want to control " +"temperature manually during print, set zero to disable temperature control " +"commands in the output file." +msgstr "" +"Extruder fúvóka hőmérséklete az első réteghez. Ha a hőmérsékletet manuálisan " +"szeretné szabályozni a nyomtatás során, állítsa be a nullát a hőmérséklet-" +"szabályozási parancsok letiltásához a kimeneti fájlban." + +msgid "Full fan speed at layer" +msgstr "Max. ventilátorsebesség a rétegnél" + +msgid "" +"Fan speed will be ramped up linearly from zero at layer " +"\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " +"\"full_fan_speed_layer\" will be ignored if lower than " +"\"disable_fan_first_layers\", in which case the fan will be running at " +"maximum allowed speed at layer \"disable_fan_first_layers\" + 1." +msgstr "" +"A ventilátor sebessége lineárisan emelkedik a \"disable_fan_first_layers\" " +"rétegnél lévő nullától a \"full_fan_speed_layer\" rétegnél lévő maximumig. A " +"\"full_fan_speed_layer\" értéket figyelmen kívül hagyjuk, ha az alacsonyabb, " +"mint a \"disable_fan_first_layers\" érték, ebben az esetben a ventilátor a " +"\"disable_fan_fan_first_layers\" + 1 értéken a maximális megengedett " +"sebességgel fog működni." + +msgid "Enable Gap fill" +msgstr "Hézagkitöltés aktiválása" + +msgid "" +"Enable gap fill algorithm. It will extrude small lines between perimeters " +"when there is not enough space for another perimeter or an infill." +msgstr "" +"Hézagkitöltő algoritmus engedélyezése. A program kis vonalakat húz a " +"peremvonalak közé, ha nincs elég hely egy másik peremvonalhoz vagy " +"kitöltéshez." + +msgid "after last perimeter" +msgstr "utolsó kerület után" + +msgid "Gapfill after last perimeter" +msgstr "Hézagkitöltés az utolsó kerület után" + +msgid "" +"All gaps, between the last perimeter and the infill, which are thinner than " +"a perimeter will be filled by gapfill." +msgstr "" +"Az utolsó kerület és a kitöltés közötti minden olyan hézagot, amely " +"vékonyabb, mint egy kerület, hézagkitöltéssel kell kitölteni." + +msgid "Min surface" +msgstr "Min. felület" + +msgid "Min gap-fill surface" +msgstr "Min. hézagkitöltő felület" + +msgid "" +"This setting represents the minimum mm² for a gapfill extrusion to be " +"created.\n" +"Can be a % of (perimeter width)²" +msgstr "" +"Ez a beállítás jelenti a minimális mm²-t a létrehozandó hézagkitöltő " +"extrudáláshoz.\n" +"Lehet a (kerületi szélesség)² %-ában." + +msgid "Gap fill overlap" +msgstr "Hézagkitöltés átfedés" + +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"gap fill. 100% means that no gaps are left, and 0% means that the gap fill " +"won't touch the perimeters.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Ez a beállítás lehetővé teszi a peremek és a hézagkitöltés közötti átfedés " +"csökkentését. A 100% azt jelenti, hogy nem maradnak hézagok, a 0% pedig azt, " +"hogy a hézagkitöltés nem érinti a kerületeket.\n" +"Ez nagyon kísérleti jellegű, kérjük, számoljon be a hasznosságáról. Lehet, " +"hogy eltávolításra kerül, ha nincs rá szükség." + +msgid "Gap fill speed" +msgstr "Hézagkitöltési sebesség" + +msgid "" +"Speed for filling small gaps using short zigzag moves. Keep this reasonably " +"low to avoid too much shaking and resonance issues.\n" +"Gap fill extrusions are ignored from the automatic volumetric speed " +"computation, unless you set it to 0." +msgstr "" +"Gyorsaság a kis rések kitöltéséhez rövid cikk-cakkos mozdulatokkal. Tartsa " +"ezt ésszerűen alacsonyan, hogy elkerülje a túl sok rázkódást és a " +"rezonanciaproblémákat.\n" +"A hézagkitöltő kitolásokat az automatikus térfogatsebesség-számítás " +"figyelmen kívül hagyja, hacsak nem állítja 0-ra." + +msgid "Verbose G-code" +msgstr "Bővebb G-kód" + +msgid "" +"Enable this to get a commented G-code file, with each line explained by " +"descriptive text. If you print from an SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" +"Ha engedélyezi ezt a funkciót, akkor egy kommentált G-kód fájlt kap, " +"amelyben minden egyes sorhoz leíró szöveg tartozik. Ha SD-kártyáról nyomtat, " +"a fájl többletsúlya miatt a firmware lelassulhat." + +msgid "Illegal characters" +msgstr "Illegális karakterek" + +msgid "Illegal characters for filename" +msgstr "Illegális karakterek a fájlnévben" + +msgid "" +"All characters that are written here will be replaced by '_' when writing " +"the gcode file name.\n" +"If the first charater is '[' or '(', then this field will be considered as a " +"regexp (enter '[^a-zA-Z0-9]' to only use ascii char)." +msgstr "" +"A G-kód fájlnév írásakor az ide írt karakterek helyébe a '_' karakter lép.\n" +"Ha az első karakter '[' vagy '(', akkor ezt a mezőt regexp-nek kell " +"tekinteni (írja be a '[^a-zA-Z0-9]' karaktert, ha csak ascii karaktereket " +"akar használni)." + +msgid "G-code flavor" +msgstr "G-kód íz" + +msgid "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." +msgstr "" +"Egyes G/M-kódú parancsok, köztük a hőmérséklet-szabályozás és mások, nem " +"univerzálisak. Állítsa be ezt az opciót a nyomtató firmware-ére a " +"kompatibilis kimenet érdekében. A \"No extrusion\" ízlés megakadályozza, " +"hogy a Slic3r egyáltalán exportáljon bármilyen extrudálási értéket." + +msgid "No extrusion" +msgstr "Nincs extrudálás" + +msgid "" +"All characters that are written here will be replaced by '_' when writing " +"the gcode file name.\n" +"If the first charater is '[' or '(', then this field will be considered as a " +"regexp (enter '[^a-zA-Z]' to only use ascii char)." +msgstr "" +"A G-kód fájlnév írásakor az ide írt karakterek helyébe a '_' karakter lép.\n" +"Ha az első karakter '[' vagy '(', akkor ezt a mezőt regexp-nek kell " +"tekinteni (írja be a '[^a-zA-Z]' karaktert, ha csak ascii karaktereket akar " +"használni)." + +msgid "Label objects" +msgstr "Címkeobjektumok" + +msgid "" +"Enable this to add comments into the G-Code labeling print moves with what " +"object they belong to, which is useful for the Octoprint CancelObject " +"plugin. This settings is NOT compatible with Single Extruder Multi Material " +"setup and Wipe into Object / Wipe into Infill." +msgstr "" +"Ha engedélyezi ezt a beállítást, akkor a G-kódba megjegyzéseket adhat, " +"amelyekben a nyomtatási mozgásokhoz tartozó objektumokat jelöljük, ami " +"hasznos az Octoprint CancelObject plugin számára. Ez a beállítás NEM " +"kompatibilis a Single Extruder Multi Material beállítással és a Wipe into " +"Object / Wipe into Infill beállítással." + +msgid "xyz decimals" +msgstr "xyz tizedesjegyek" + +msgid "Choose how many digits after the dot for xyz coordinates." +msgstr "" +"Válassza ki, hogy az XYZ-koordinátákhoz hány számjegyet használjon a pont " +"után." + +msgid "Extruder decimals" +msgstr "Extruder tizedesjegyek" + +msgid "Choose how many digits after the dot for extruder moves." +msgstr "" +"Válassza ki, hogy a pont után hány számjegy következzen az extruder " +"mozgatásához." + +msgid "High extruder current on filament swap" +msgstr "Magas extruderáram szálcserénél" + +msgid "" +"It may be beneficial to increase the extruder motor current during the " +"filament exchange sequence to allow for rapid ramming feed rates and to " +"overcome resistance when loading a filament with an ugly shaped tip." +msgstr "" +"Előnyös lehet az extrudermotor áramának növelése a szálcsere-szekvencia " +"során, hogy lehetővé tegye a gyors tömörítő előtolási sebességet és az " +"ellenállás leküzdését a csúnya alakú végű szál betöltésekor." + +msgid "Infill acceleration" +msgstr "Kitöltési gyorsulás" + +msgid "" +"This is the acceleration your printer will use for infill.\n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for infill." +msgstr "" +"Ez az a gyorsulás, amelyet a nyomtató a kitöltéshez használ.\n" +"Az alapértelmezett gyorsítás %-ában megadható\n" +"A nullát állítsa be a kitöltés gyorsításvezérlés kikapcsolásához." + +msgid "Combine infill every" +msgstr "Kombinál minden kitöltést" + +msgid "" +"This feature allows you to combine infill and speed up your print by " +"extruding thicker infill layers while preserving thin perimeters, thus " +"accuracy." +msgstr "" +"Ez a funkció lehetővé teszi a kitöltés kombinálását és a nyomtatás " +"felgyorsítását a vastagabb kitöltőrétegek extrudálásával, miközben megőrzi a " +"vékony perimétereket, így a pontosságot." + +msgid "Combine infill every n layers" +msgstr "Kombinálja a kitöltést minden n rétegben" + +msgid "Length of the infill anchor" +msgstr "A kitöltő horgony hossza" + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than infill_anchor_max is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to this parameter, but no longer than anchor_length_max. \n" +"Set this parameter to zero to disable anchoring perimeters connected to a " +"single infill line." +msgstr "" +"Csatlakoztasson egy kitöltési vonalat egy belső kerülethez egy további " +"kerület rövid szakaszával. Ha százalékban van kifejezve (példa: 15%), akkor " +"azt a kitöltési extrudálás szélességére kell számítani. A Slic3r megpróbál " +"két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha " +"nem talál ilyen, az infill_anchor_max értéknél rövidebb kerületi szegmenst, " +"akkor a kitöltési vonal csak az egyik oldalon csatlakozik egy kerületi " +"szegmenshez, és a felvett kerületi szegmens hossza erre a paraméterre " +"korlátozódik, de nem lehet hosszabb, mint a anchor_length_max érték. \n" +"Ha ezt a paramétert nullára állítja, akkor az egyetlen kitöltési vonalhoz " +"csatlakozó kerületi szakaszok lehorgonyzását kikapcsolja." + +msgid "0 (no open anchors)" +msgstr "0 (nincs nyitott horgony)" + +msgid "1000 (unlimited)" +msgstr "1000 (korlátlan)" + +msgid "Maximum length of the infill anchor" +msgstr "A kitöltő horgony maximális hossza" + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than this parameter is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to infill_anchor, but no longer than this parameter. \n" +"If set to 0, the old algorithm for infill connection will be used, it should " +"create the same result as with 1000 & 0." +msgstr "" +"Csatlakoztasson egy kitöltési vonalat egy belső kerülethez egy további " +"kerület rövid szakaszával. Ha százalékban van kifejezve (példa: 15%), akkor " +"azt a kitöltési extrudálás szélességére kell számítani. A Slic3r megpróbál " +"két közeli kitöltési vonalat egy rövid kerületi szegmenssel összekötni. Ha " +"nem talál ennél a paraméternél rövidebb kerületi szegmenst, akkor a " +"kitöltési vonal csak az egyik oldalon kapcsolódik egy kerületi szegmenshez, " +"és a felvett kerületi szegmens hossza az infill_anchor értékre korlátozódik, " +"de nem lehet hosszabb, mint ez a paraméter. \n" +"Ha 0-ra van állítva, akkor a régi algoritmus kerül alkalmazásra a kitöltés " +"összekapcsolására, ugyanolyan eredményt kell adnia, mint az 1000 & 0 értékek " +"esetén." + +msgid "0 (Simple connect)" +msgstr "0 (egyszerű kapcsolat)" + +msgid "Dense infill layer" +msgstr "Sűrű kitöltő réteg" + +msgid "" +"Enables the creation of a support layer under the first solid layer. This " +"allows you to use a lower infill ratio without compromising the top quality. " +"The dense infill is laid out with a 50% infill density." +msgstr "" +"Lehetővé teszi az első szilárd réteg alatti alátámasztó réteg létrehozását. " +"Ez lehetővé teszi, hogy alacsonyabb kitöltési arányt használjon anélkül, " +"hogy a csúcsminőség romlana. A sűrű kitöltés 50%-os kitöltési sűrűséggel " +"kerül lefektetésre." + +msgid "Connection of sparse infill lines" +msgstr "Ritkás kitöltési vonalak csatlakoztatása" + +msgid "" +"Give to the infill algorithm if the infill needs to be connected, and on " +"which perimeters Can be useful for art or with high infill/perimeter " +"overlap. The result may vary between infill types." +msgstr "" +"Adja meg a kitöltési algoritmusnak, ha a kitöltést össze kell kötni, és mely " +"kerületeken lehet hasznos a művelet vagy a nagy kitöltés/kerületi átfedés " +"esetén. Az eredmény kitöltési típusonként eltérő lehet." + +msgid "Connected" +msgstr "Csatlakoztatva" + +msgid "Connected to hole perimeters" +msgstr "A lyukak pereméhez csatlakozik" + +msgid "Connected to outer perimeters" +msgstr "Külső kerülethez csatlakozik" + +msgid "Not connected" +msgstr "Nincs csatlakoztatva" + +msgid "Connection of top infill lines" +msgstr "A felső kitöltő vonalak csatlakoztatása" + +msgid "Connection of bottom infill lines" +msgstr "Alsó kitöltő vonalak csatlakoztatása" + +msgid "Connection of solid infill lines" +msgstr "Tömör kitöltési vonalak csatlakoztatása" + +msgid "Algorithm" +msgstr "Algoritmus" + +msgid "Dense infill algorithm" +msgstr "Sűrű kitöltési algoritmus" + +msgid "" +"Choose the way the dense layer is laid out. The automatic option lets it try " +"to draw the smallest surface with only strait lines inside the sparse " +"infill. The Anchored option just slightly enlarges (by 'Default infill " +"margin') the surfaces that need a better support." +msgstr "" +"Válassza ki a sűrű réteg elrendezésének módját. Az automatikus opció " +"lehetővé teszi, hogy a legkisebb felületet csak szűk vonalakkal próbálja " +"megrajzolni a ritka kitöltésen belül. A Rögzített opció csak kissé megnöveli " +"(az 'Alapértelmezett kitöltési margóval') azokat a felületeket, amelyeknek " +"jobb alátámasztásra van szükségük." + +msgid "Automatic" +msgstr "Automatikus" + +msgid "Automatic, unless full" +msgstr "Automatikus, kivéve, ha teljes" + +msgid "Automatic, only for small areas" +msgstr "Automatikus, csak kis területekre" + +msgid "Automatic, or anchored if too big" +msgstr "Automatikus, vagy lehorgonyzott, ha túl nagy" + +msgid "Anchored" +msgstr "Horgonyzott" + +msgid "Infill extruder" +msgstr "Kitöltő extruder" + +msgid "The extruder to use when printing infill." +msgstr "A kitöltés nyomtatásához használt extruder." + +msgid "Infill width" +msgstr "Kitöltési szélesség" + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left as zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Állítsa ezt a nullától eltérő értékre a kitöltés kézi kihúzási szélességének " +"beállításához. Ha nulla marad, akkor az alapértelmezett extrudálási " +"szélesség kerül felhasználásra, ha be van állítva, ellenkező esetben 1,125 x " +"fúvókaátmérő lesz használatos. Érdemes zsírosabb extrudátumokat használni, " +"hogy felgyorsítsa a feltöltést és erősebbé tegye az alkatrészeket. Ha " +"százalékban fejezik ki (például 110%), akkor a fúvóka átmérője alapján " +"számítják ki.\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása az " +"alapértelmezett rétegmagasság használatával történik." + +msgid "Infill spacing" +msgstr "Kitöltési távolság" + +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Mint az Első réteg szélessége, de a térköz a két vonal közötti távolság " +"(mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"Beállíthatja a 'Térköz' vagy a 'Szélesség' értéket; a másik kiszámítása az " +"alapértelmezett rétegmagasság használatával történik." + +msgid "Infill before perimeters" +msgstr "Kitöltés a peremek előtt" + +msgid "" +"This option will switch the print order of perimeters and infill, making the " +"latter first." +msgstr "" +"Ez az opció megváltoztatja a kerületek és a kitöltés nyomtatási sorrendjét, " +"és ez utóbbi lesz az első." + +msgid "Only infill where needed" +msgstr "Csak ott töltse ki, ahol szükséges" + +msgid "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, this slows " +"down the G-code generation due to the multiple checks involved." +msgstr "" +"Ez a lehetőség a födémek alátámasztásához ténylegesen szükséges területekre " +"korlátozza a kitöltést (belső támasztóanyagként működik). Ha engedélyezve " +"van, ez lelassítja a G-kód generálását a többszörös ellenőrzés miatt." + +msgid "Infill/perimeters encroachment" +msgstr "Kitöltés/kerületek beavatkozás" + +msgid "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width.\n" +"Don't put a value higher than 50% (of the perimeter width), as it will fuse " +"with it and follow the perimeter." +msgstr "" +"Ez a beállítás további átfedést alkalmaz a kitöltés és a kerületek között a " +"jobb tapadás érdekében. Elméletileg erre nincs szükség, de a visszacsapás " +"hézagokat okozhat. Ha százalékban fejezzük ki (példa: 15%), akkor a kerületi " +"extrudálási szélességre számítjuk.\n" +"Ne adjon meg 50%-nál nagyobb értéket (a kerület szélességének), mert az " +"összeolvad vele és követi a kerületet." + +msgid "Sparse" +msgstr "Ritka" + +msgid "Sparse infill speed" +msgstr "Ritkás kitöltési sebesség" + +msgid "Speed for printing the internal fill. Set zero for auto." +msgstr "" +"A belső kitöltés nyomtatási sebessége. Állítsa be nullával automatikusra." + +msgid "Inherits profile" +msgstr "Örökli a profilt" + +msgid "Name of the profile, from which this profile inherits." +msgstr "A profil neve, amelyből a profil öröklődik." + +msgid "Interface shells" +msgstr "Interfész héjak" + +msgid "" +"Force the generation of solid shells between adjacent materials/volumes. " +"Useful for multi-extruder prints with translucent materials or manual " +"soluble support material." +msgstr "" +"Kényszerítse a szilárd héjak létrehozását a szomszédos anyagok/térfogatok " +"között. Hasznos több extruderes nyomatokhoz áttetsző anyagokkal vagy " +"manuálisan oldható hordozóanyaggal." + +msgid "Enable ironing" +msgstr "Vasalás bekapcsolása" + +msgid "" +"Enable ironing of the top layers with the hot print head for smooth surface" +msgstr "" +"Engedélyezze a felső rétegek vasalását a forró nyomtatófejjel a sima felület " +"érdekében" + +msgid "Ironing angle" +msgstr "Vasalási szög" + +msgid "Ironing angle. if negative, it will use the fill angle." +msgstr "Vasalási szög. Ha negatív, akkor a kitöltési szöget fogja használni." + +msgid "Ironing Type" +msgstr "Vasalás típusa" + +msgid "All top surfaces" +msgstr "Minden felső felület" + +msgid "Topmost surface only" +msgstr "Csak a felső felület" + +msgid "All solid surfaces" +msgstr "Minden szilárd felület" + +msgid "Flow rate" +msgstr "Áramlási sebesség" + +msgid "" +"Percent of a flow rate relative to object's normal layer height. It's the " +"percentage of the layer that will be over-extruded on top to do the ironing." +msgstr "" +"Az áramlási sebesség százaléka az objektum normál rétegmagasságához " +"viszonyítva. Ez annak a rétegnek a százalékos aránya, amelyet túlnyomnak a " +"tetejére a vasalás elvégzéséhez." + +msgid "Spacing between ironing lines" +msgstr "A vasalási vonalak közötti távolságtartás" + +msgid "Distance between ironing lines" +msgstr "A vasalási vonalak közötti távolság" + +msgid "" +"Ironing speed. Used for the ironing pass of the ironing infill pattern, and " +"the post-process infill. Can be defined as mm.s, or a % of the top solid " +"infill speed.\n" +"Ironing extrusions are ignored from the automatic volumetric speed " +"computation." +msgstr "" +"Vasalási sebesség. A vasalási kitöltési minta vasalási menetéhez és a " +"kitöltés utáni vasaláshoz használatos. Meghatározható mm-ben vagy a felső " +"tömör kitöltési sebesség %-ában.\n" +"A vasalási extrudálások figyelmen kívül maradnak az automatikus " +"térfogatsebesség-számításnál." + +msgid "After layer change G-code" +msgstr "Rétegváltás után G-kód" + +msgid "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as {layer_num} and " +"{layer_z}." +msgstr "" +"Ezt az egyéni kódot minden rétegváltáskor beillesztjük, közvetlenül a Z " +"elmozdulás után, és mielőtt az extruder az első rétegpontra mozdulna. Vegye " +"figyelembe, hogy használhat helyőrző változókat az összes Slic3r " +"beállításhoz, valamint a {layer_num} és {layer_z} értékekhez." + +msgid "" +"This custom code is inserted at every extrusion type change.Note that you " +"can use placeholder variables for all Slic3r settings as well as " +"{last_extrusion_role}, {extrusion_role}, {layer_num} and {layer_z}. The " +"'extrusion_role' strings can take these string values: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " +"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " +"SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the " +"role of the extrusion is not unique, not exactly inside another category or " +"not known." +msgstr "" +"Ezt az egyéni kódot a rendszer minden kihúzástípus-módosításkor beilleszti. " +"Vegye figyelembe, hogy használhat helyőrző változókat az összes Slic3r " +"beállításhoz, valamint a {last_extrusion_role}, {extrusion_role}, " +"{layer_num} és {layer_z} paraméterekhez. Az 'extrusion_role' karakterláncok " +"a következő karakterlánc-értékeket vehetik fel: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " +"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " +"SupportMaterialInterface, WipeTower, Mixed}. A Mixed csak akkor használható, " +"ha az extrudálás szerepe nem egyedi, nem pontosan más kategóriában belül, " +"vagy nem ismert." + +msgid "Exact last layer height" +msgstr "Pontos utolsó rétegmagasság" + +msgid "" +"This setting controls the height of last object layers to put the last layer " +"at the exact highest height possible. Experimental." +msgstr "" +"Ez a beállítás szabályozza az utolsó objektumrétegek magasságát, hogy az " +"utolsó réteg pontosan a lehető legmagasabbra kerüljön. Kísérleti." + +msgid "Supports remaining times" +msgstr "Támogatja a hátralévő időket" + +msgid "" +"Emit something at 1 minute intervals into the G-code to let the firmware " +"show accurate remaining time." +msgstr "" +"Küldjön valamit 1 perces időközönként a G-kódba, hogy a firmware pontosan " +"mutassa a hátralévő időt." + +msgid "Method" +msgstr "Módszer" + +msgid "Supports remaining times method" +msgstr "Támogatja a fennmaradó idők módszerét" + +msgid "" +"M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute " +"intervals into the G-code to let the firmware show accurate remaining time. " +"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " +"firmware supports M73 Qxx Sxx for the silent mode.\n" +"M117: Send a command to display a message to the printer, this is 'Time " +"Left .h..m..s'." +msgstr "" +"M73: M73 P{nyomtatott százalék} R{maradó idő percben} 1 perces időközönként " +"a G-kódba, hogy a firmware pontosan mutassa a hátralévő időt. Jelenleg csak " +"a Prusa i3 MK3 firmware ismeri fel az M73-at. Az i3 MK3 firmware is " +"támogatja az M73 Qxx Sxx Sxx-t a csendes üzemmódban.\n" +"M117: Küldjön egy parancsot a nyomtatónak egy üzenet megjelenítésére, ez a " +"'Time Left .h..m..s'." + +msgid "M117" +msgstr "M117" + +msgid "M73" +msgstr "M73" + +msgid "Supports stealth mode" +msgstr "Támogatja a lopakodó módot" + +msgid "The firmware supports stealth mode" +msgstr "A firmware támogatja a lopakodó üzemmódot" + +msgid "Fan startup delay" +msgstr "Ventilátor indítási késleltetés" + +msgid "" +"Move the fan start in the past by at least this delay (in seconds, you can " +"use decimals). It assumes infinite acceleration for this time estimation, " +"and will only take into account G1 and G0 moves.\n" +"It won't move fan comands from custom gcodes (they act as a sort of " +"'barrier').\n" +"It won't move fan comands into the start gcode if the 'only custom start " +"gcode' is activated.\n" +"Use 0 to deactivate." +msgstr "" +"A ventilátor indítását legalább ennyi késleltetéssel (másodpercben, " +"tizedesjegyeket is használhat) tolja a múltba. Ehhez az időbecsléshez " +"végtelen gyorsulást feltételez, és csak a G1 és G0 mozgásokat veszi " +"figyelembe.\n" +"Az egyéni G-kódokból származó ventilátorparancsokat nem mozgatja (ezek " +"egyfajta \"akadálynak\" hatnak).\n" +"Nem mozgatja a ventilátorparancsokat a start G-kódba, ha a 'csak egyéni " +"start G-kód' opció be van kapcsolva.\n" +"A kikapcsoláshoz állítsa 0-ra." + +msgid "Allow fan delay on overhangs" +msgstr "Engedélyezze a ventilátor késleltetését a túlnyúlásoknál" + +msgid "Will only take into account the delay for the cooling of overhangs." +msgstr "Csak a túlnyúlások hűtésének késleltetését veszi figyelembe." + +msgid "Fan KickStart time" +msgstr "Fan KickStart idő" + +msgid "" +"Add a M106 S255 (max speed for fan) for this amount of seconds before going " +"down to the desired speed to kick-start the cooling fan.\n" +"This value is used for a 0->100% speedup, it will go down if the delta is " +"lower.\n" +"Set to 0 to deactivate." +msgstr "" +"Adjon hozzá egy M106 S255-öt (a ventilátor maximális fordulatszáma) ennyi " +"másodpercig, mielőtt a kívánt fordulatszámra csökkenne, hogy beindítsa a " +"hűtőventilátort.\n" +"Ezt az értéket 0->100%-os felgyorsítás esetén használjuk, ha a delta kisebb, " +"akkor lefelé megy.\n" +"A kikapcsoláshoz állítsa 0-ra." + +msgid "Min height for travel" +msgstr "Min. utazási magasság" + +msgid "" +"When an extruder travels to an object (from the start position or from an " +"object to another), the nozzle height is guaranteed to be at least at this " +"value.\n" +"It's made to ensure the nozzle won't hit clips or things you have on your " +"bed. But be careful to not put a clip in the 'convex shape' of an object.\n" +"Set to 0 to disable." +msgstr "" +"Amikor az extruder egy objektumhoz halad (a kiindulási pozícióból vagy egy " +"objektumtól egy másikhoz), a fúvóka magassága garantáltan legalább ezen az " +"értéken van.\n" +"Ez azért készült, hogy a fúvóka ne ütközzön klipszeknek vagy az ágyon lévő " +"tárgyaknak. De vigyázzon, hogy ne tegyen klipszet egy objektum \"domború " +"alakjába\".\n" +"A letiltáshoz állítsa 0-ra." + +msgid "How to apply limits" +msgstr "Hogyan kell alkalmazni a korlátokat" + +msgid "Purpose of Machine Limits" +msgstr "A gépi korlátok célja" + +msgid "" +"How to apply the Machine Limits.\n" +"* In every case, they will be used as safeguards: Even if you use a print " +"profile that sets an acceleration of 5000, if in your machine limits the " +"acceleration is 4000, the outputted gcode will use the 4000 limit.\n" +"* You can also use it as a safeguard and to have a better printing time " +"estimate.\n" +"* You can also use it as a safeguard, to have a better printing time " +"estimate and emit the limits at the begining of the gcode file, with M201 " +"M202 M203 M204 and M205 commands. If you want only to write a sub-set, " +"choose the 'for time estimate' option and write your own gcodes in the " +"custom gcode section." +msgstr "" +"Hogyan kell alkalmazni a gépi korlátozást.\n" +"* Minden esetben biztosítékként kerülnek alkalmazásra: Még ha olyan " +"nyomtatási profilt használ is, amely 5000-es gyorsulást állít be, ha a gépi " +"korlátokban a gyorsulás 4000-es, a kiadott G-kód a 4000-es korlátot fogja " +"használni.\n" +"* Védelemként és a nyomtatási idő jobb megbecsülése érdekében is " +"használhatja.\n" +"* Ezt biztosítékként is használhatja, hogy a nyomtatási időt jobban " +"megbecsülje, és a G-kód fájl elején kiadja a korlátozásokat az M201 M202 " +"M203 M204 és M205 parancsokkal. Ha csak egy részhalmazt szeretne írni, " +"válassza az 'időbecsléshez' opciót, és írja meg saját G-kódját az egyéni G-" +"kód részbe." + +msgid "Also emit limits to G-code" +msgstr "A G-kódra vonatkozó határértékek kibocsátása is" + +msgid "Use also for time estimate" +msgstr "Használja az időbecsléshez is" + +msgid "Use only as safeguards" +msgstr "Csak biztosítékként használható" + +msgid "Disable" +msgstr "Letiltás" + +msgid "Maximum feedrate X" +msgstr "Maximális előtolás X" + +msgid "Maximum feedrate Y" +msgstr "Maximális előtolás Y" + +msgid "Maximum feedrate Z" +msgstr "Maximális előtolás Z" + +msgid "Maximum feedrate E" +msgstr "Maximális előtolás E" + +msgid "Maximum feedrate of the X axis" +msgstr "Az X tengely maximális előtolása" + +msgid "Maximum feedrate of the Y axis" +msgstr "Az Y tengely maximális előtolása" + +msgid "Maximum feedrate of the Z axis" +msgstr "A Z tengely maximális előtolása" + +msgid "Maximum feedrate of the E axis" +msgstr "Az E tengely maximális előtolása" + +msgid "Maximum acceleration X" +msgstr "Maximális gyorsulás X" + +msgid "Maximum acceleration Y" +msgstr "Maximális gyorsulás Y" + +msgid "Maximum acceleration Z" +msgstr "Maximális gyorsulás Z" + +msgid "Maximum acceleration E" +msgstr "Maximális gyorsulás E" + +msgid "Maximum acceleration of the X axis" +msgstr "Az X tengely maximális gyorsulása" + +msgid "Maximum acceleration of the Y axis" +msgstr "Az Y tengely maximális gyorsulása" + +msgid "Maximum acceleration of the Z axis" +msgstr "A Z tengely maximális gyorsulása" + +msgid "Maximum acceleration of the E axis" +msgstr "Az E tengely maximális gyorsulása" + +msgid "mm/s²" +msgstr "mm/mp²" + +msgid "Maximum jerk X" +msgstr "Maximális rántás X" + +msgid "Maximum jerk Y" +msgstr "Maximális rántás Y" + +msgid "Maximum jerk Z" +msgstr "Maximális rántás Z" + +msgid "Maximum jerk E" +msgstr "Maximális rántás E" + +msgid "Maximum jerk of the X axis" +msgstr "Az X tengely maximális rántása" + +msgid "Maximum jerk of the Y axis" +msgstr "Az Y tengely maximális rántása" + +msgid "Maximum jerk of the Z axis" +msgstr "A Z tengely maximális rántása" + +msgid "Maximum jerk of the E axis" +msgstr "Az E tengely maximális rántása" + +msgid "Minimum feedrate when extruding" +msgstr "Minimális előtolás extrudáláskor" + +msgid "Minimum feedrate when extruding (M205 S)" +msgstr "Minimális előtolás extrudáláskor (M205 S)" + +msgid "Minimum travel feedrate" +msgstr "Minimális utazási előtolás" + +msgid "Minimum travel feedrate (M205 T)" +msgstr "Minimális utazási előtolás (M205 T)" + +msgid "Maximum acceleration when extruding" +msgstr "Maximális gyorsulás extrudáláskor" + +msgid "Maximum acceleration when extruding (M204 P)" +msgstr "Maximális gyorsulás extrudáláskor (M204 P)" + +msgid "Maximum acceleration when retracting" +msgstr "Maximális gyorsulás visszahúzáskor" + +msgid "Maximum acceleration when retracting (M204 R)" +msgstr "Maximális gyorsulás visszahúzáskor (M204 R)" + +msgid "Maximum acceleration when travelling" +msgstr "Maximális gyorsulás utazás közben" + +msgid "Maximum acceleration when travelling (M204 T)" +msgstr "Maximális gyorsulás utazás közben (M204 T)" + +msgid "Maximum G1 per second" +msgstr "Maximum G1 másodpercenként" + +msgid "" +"If your firmware stops while printing, it may have its gcode queue full. Set " +"this parameter to merge extrusions into bigger ones to reduce the number of " +"gcode commands the printer has to process each second.\n" +"On 8bit controlers, a value of 150 is typical.\n" +"Note that reducing your printing speed (at least for the external " +"extrusions) will reduce the number of time this will triggger and so " +"increase quality.\n" +"Set zero to disable." +msgstr "" +"Ha a firmware megáll nyomtatás közben, akkor lehet, hogy a G-kód várólistája " +"megtelt. Állítsa be ezt a paramétert, hogy nagyobb extrudálásokat " +"egyesítsen, hogy csökkentse a nyomtatónak másodpercenként feldolgozandó G-" +"kód parancsok számát.\n" +"A 8 bites vezérlőknél a 150-es érték a jellemző.\n" +"Vegye figyelembe, hogy a nyomtatási sebesség csökkentése (legalábbis a külső " +"extrudálások esetében) csökkenti a kiváltások számát, és így növeli a " +"minőséget.\n" +"Adjon meg nulla értéket a letiltáshoz." + +msgid "Max fan speed" +msgstr "Max. ventilátor sebesség" + +msgid "" +"This setting represents the maximum speed of your fan, used when the layer " +"print time is Very short." +msgstr "" +"Ez a beállítás a ventilátor maximális sebességét jelenti, amelyet akkor " +"használ, ha a rétegnyomtatási idő Nagyon rövid." + +msgid "Max layer height" +msgstr "Max. rétegmagasság" + +msgid "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. \n" +"Can be a % of the nozzle diameter.\n" +"If set to 0, layer height is limited to 75% of the nozzle diameter." +msgstr "" +"Ez a legnagyobb nyomtatható rétegmagasság ennél az extrudernél, amely a " +"változó rétegmagasság és a támasztóréteg magasságának felső határértékeként " +"szolgál. A maximális ajánlott rétegmagasság az extrudálás szélességének " +"75%-a az ésszerű rétegközi tapadás elérése érdekében. \n" +"Lehet a fúvóka átmérőjének %-a.\n" +"Ha 0-ra van állítva, a rétegmagasság a fúvókaátmérő 75%-ára korlátozódik." + +msgid "Max print speed" +msgstr "Max. nyomtatási sebesség" + +msgid "" +"When setting other speed settings to 0, Slic3r will autocalculate the " +"optimal speed in order to keep constant extruder pressure. This experimental " +"setting is used to set the highest print speed you want to allow." +msgstr "" +"Ha más sebességbeállításokat 0-ra állít, a Slic3r automatikusan kiszámítja " +"az optimális sebességet, hogy az extrudernyomás állandó maradjon. Ez a " +"kísérleti beállítás a legnagyobb nyomtatási sebesség beállítására szolgál." + +msgid "Max speed reduction" +msgstr "Max. sebességcsökkentés" + +msgid "" +"This setting control by how much the speed can be reduced to increase the " +"layer time. It's a maximum reduction, so a lower value makes the minimum " +"speed higher. Set to 90% if you don't want the speed to go below 10% of the " +"current speed.\n" +"Set zero to disable" +msgstr "" +"Ez a beállítás szabályozza, hogy mennyivel csökkenthető a sebesség a " +"rétegezési idő növelése érdekében. Ez egy maximális csökkentés, így egy " +"alacsonyabb érték a minimális sebességet növeli. Állítsa 90%-ra, ha nem " +"szeretné, hogy a sebesség az aktuális sebesség 10%-a alá csökkenjen.\n" +"Adjon meg nulla értéket a letiltáshoz" + +msgid "" +"This experimental setting is used to set the maximum volumetric speed your " +"extruder supports." +msgstr "" +"Ez a kísérleti beállítás az extruder által támogatott maximális " +"térfogatsebesség beállítására szolgál." + +msgid "Max volumetric slope positive" +msgstr "Max. térfogati meredekség pozitív" + +msgid "" +"This experimental setting is used to limit the speed of change in extrusion " +"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " +"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" +"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." +msgstr "" +"Ez a kísérleti beállítás az extrudálási sebesség változásának sebességét " +"korlátozza. Az 1,8mm³/mp² érték biztosítja, hogy az 1,8mm³/mp extrudálási " +"sebesség (0,45mm extrudálási szélesség, 0,2mm extrudálási magasság, 20mm/mp " +"előtolási sebesség) és 5,4mm³/mp (60 mm/mp előtolási sebesség) közötti " +"változás legalább 2 másodpercig tart." + +msgid "mm³/s²" +msgstr "mm³/mp²" + +msgid "Max volumetric slope negative" +msgstr "Max. térfogati meredekség negatív" + +msgid "Default fan speed" +msgstr "Alapértelmezett ventilátor sebesség" + +msgid "" +"This setting represents the base fan speed this filament needs, or at least " +"the minimum PWM your fan needs to work." +msgstr "" +"Ez a beállítás jelenti a ventilátor alapsebességét, amelyre ennek az " +"nyomtatószálnak szüksége van, vagy legalábbis azt a minimális PWM-et, " +"amelyre a ventilátornak szüksége van a működéshez." + +msgid "Fan PWM from 0-100" +msgstr "Ventilátor PWM 0-100" + +msgid "" +"Set this if your printer uses control values from 0-100 instead of 0-255." +msgstr "" +"Ezt akkor állítsa be, ha a nyomtató 0-255 helyett 0-100 közötti értékeket " +"használ." + +msgid "Min layer height" +msgstr "Min. rétegmagasság" + +msgid "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm.\n" +"Can be a % of the nozzle diameter." +msgstr "" +"Ez a legalacsonyabb nyomtatható rétegmagasság ennél az extrudernél, és " +"korlátozza a változó rétegmagasság felbontását. A tipikus értékek 0,05 mm és " +"0,1 mm között vannak.\n" +"Lehet a fúvóka átmérőjének %-a." + +msgid "Minimum extrusion length" +msgstr "Minimális extrudálási hossz" + +msgid "" +"[Deprecated] Prefer using max_gcode_per_second instead, as it's much better " +"when you have very different speeds for features.\n" +"Too many too small commands may overload the firmware / connection. Put a " +"higher value here if you see strange slowdown.\n" +"Set zero to disable." +msgstr "" +"[Deprecated] Használja inkább a max_gcode_per_second-ot, mivel ez sokkal " +"jobb, ha a funkciók sebessége nagyon eltérő.\n" +"A túl sok túl kicsi parancs túlterhelheti a firmware-t / kapcsolatot. Tegyen " +"ide magasabb értéket, ha furcsa lassulást tapasztal.\n" +"A kikapcsoláshoz állítsa nullára." + +msgid "Minimum top width for infill" +msgstr "Minimális felső szélesség a kitöltéshez" + +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width." +msgstr "" +"Ha egy felső felületet kell nyomtatni, és azt részben egy másik réteg " +"takarja, akkor nem lesz figyelembe véve egy olyan felső rétegnél, ahol a " +"szélessége ez alatt az érték alatt van. Ez hasznos lehet ahhoz, hogy az 'egy " +"kerület a tetején' ne váltson ki olyan felületen, amelyet csak kerületnek " +"kell fednie. Ez az érték lehet mm vagy a kerület extrudálási szélességének " +"%-a." + +msgid "Min print speed" +msgstr "Min. nyomtatási sebesség" + +msgid "Slic3r will never scale the speed below this one." +msgstr "A Slic3r soha nem skálázza a sebességet ez alá." + +msgid "Minimal filament extrusion length" +msgstr "Minimális szál extrudálási hossza" + +msgid "" +"Generate no less than the number of skirt loops required to consume the " +"specified amount of filament on the bottom layer. For multi-extruder " +"machines, this minimum applies to each extruder." +msgstr "" +"Legalább annyi szoknyahurkot kell létrehozni, amennyi az alsó réteg " +"meghatározott mennyiségű nyomtatószál elhasználásához szükséges. Több " +"extruderes gépnél ez a minimum minden egyes extruderre vonatkozik." + +msgid "Configuration notes" +msgstr "Konfigurációs jegyzetek" + +msgid "" +"Here you can put your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" +"Itt helyezheti el személyes jegyzeteit. Ez a szöveg a G-kód fejlécének " +"megjegyzéseihez kerül hozzáadásra." + +msgid "" +"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" +msgstr "Ez az extruder fúvókájának átmérője (például: 0,5, 0,35 stb.)" + +msgid "Host Type" +msgstr "Gazdatípus" + +msgid "" +"Slic3r can upload G-code files to a printer host. This field must contain " +"the kind of the host." +msgstr "" +"A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek " +"tartalmaznia kell a gazdagép típusát." + +msgid "Custom Print variables" +msgstr "Egyedi nyomtatási változók" + +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. the variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"Advice: before using a variable, it's safer to use the function " +"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " +"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " +"'string'." +msgstr "" +"Hozzáadhatja az egyéni kódú makrókhoz elérhető adatokat.\n" +"Minden sorban egy változót definiálhat.\n" +"A formátum 'variable_name=value'. A változó neve csak [a-zA-Z0-9] vagy '_' " +"karaktereket tartalmazhat.\n" +"Az int vagy float értékként elemezhető érték numerikus értékként lesz " +"elérhető.\n" +"A dupla idézőjelek közé zárt érték stringként (idézőjelek nélkül) lesz " +"elérhető.\n" +"A csak 'true' vagy 'false' értéket felvevők értékek boolean értékek " +"lesznek.)\n" +"Minden más értéket stringként elemzünk, ahogy van.\n" +"Tanács: mielőtt egy változót használna, biztonságosabb a " +"'default_XXX(variable_name, default_value)' függvényt használni (zárójelben, " +"mivel szkriptről van szó) arra az esetre, ha az nincs beállítva. Az XXX " +"helyettesíthető 'int' 'bool' 'double' 'string' értékkel." + +msgid "" +"Slic3r can upload G-code files to a printer host. This field should contain " +"the hostname, IP address or URL of the printer host instance." +msgstr "" +"A Slic3r képes G-kód fájlokat feltölteni egy gazdagépre. Ennek a mezőnek " +"tartalmaznia kell a gazdagép példányának hostnevét, IP-címét vagy URL-címét." + +msgid "Only retract when crossing perimeters" +msgstr "Csak a kerületek átlépésekor húzza vissza" + +msgid "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will probably be invisible)." +msgstr "" +"Letiltja a visszahúzást, ha az utazási útvonal nem haladja meg a felső réteg " +"határait (és így valószínűleg láthatatlan lesz az esetleges trutyi)." + +msgid "Enable" +msgstr "Engedélyez" + +msgid "" +"This option will drop the temperature of the inactive extruders to prevent " +"oozing. It will enable a tall skirt automatically and move extruders outside " +"such skirt when changing temperatures." +msgstr "" +"Ez az opció csökkenti az inaktív extruderek hőmérsékletét, hogy " +"megakadályozza a szivárgást. Automatikusan engedélyezi a magas szoknyát, és " +"a hőmérséklet változásakor az extrudereket a szoknyán kívülre helyezi." + +msgid "Output filename format" +msgstr "Kimeneti fájlnév formátum" + +msgid "" +"You can use all configuration options as variables inside this template. For " +"example: {layer_height}, {fill_density} etc. You can also use {timestamp}, " +"{year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " +"{input_filename}, {input_filename_base}." +msgstr "" +"Ebben a sablonban az összes konfigurációs opciót használhatja változóként. " +"Például: {layer_height}, {fill_density} stb. Használhatja továbbá a " +"{timestamp}, {year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " +"{input_filename}, {input_filename_base} értékeket." + +msgid "Overhangs" +msgstr "Túlnyúlások" + +msgid "Overhangs speed" +msgstr "Túlnyúlások sebessége" + +msgid "" +"Speed for printing overhangs.\n" +"Can be a % of the bridge speed." +msgstr "" +"Gyorsaság a túlnyúlások nyomtatásához.\n" +"Lehet a híd sebességének %-a." + +msgid "'As bridge' speed threshold" +msgstr "\"Hídként\" sebességküszöb" + +msgid "Overhang bridge speed threshold" +msgstr "Túlnyúló híd sebességküszöb" + +msgid "" +"Minimum unsupported width for an extrusion to apply the bridge fan & " +"overhang speed to this overhang. Can be in mm or in a % of the nozzle " +"diameter. Set to 0 to deactivate." +msgstr "" +"Egy extrudálás minimális nem alátámasztott szélessége, hogy a hídventilátor " +"és a túlnyúlás sebességét erre a túlnyúlásra lehessen alkalmazni. Megadható " +"mm-ben vagy a fúvóka átmérőjének %-ában. A kikapcsoláshoz állítsa 0-ra." + +msgid "'As bridge' flow threshold" +msgstr "\"Hídként\" áramlási küszöbérték" + +msgid "Overhang bridge flow threshold" +msgstr "Túlnyúló híd áramlási küszöbérték" + +msgid "" +"Minimum unsupported width for an extrusion to apply the bridge flow to this " +"overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to " +"deactivate." +msgstr "" +"Egy extrudálás minimális nem alátámasztott szélessége, hogy a hídáramlást " +"erre a túlnyúlásra lehessen alkalmazni. Megadható mm-ben vagy a fúvóka " +"átmérőjének %-ában. A kikapcsoláshoz állítsa 0-ra." + +msgid "Reverse on odd" +msgstr "Páratlan fordítottja" + +msgid "Overhang reversal" +msgstr "Túlnyúlás megfordítása" + +msgid "" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on odd layers. This alternating pattern can drastically improve " +"steep overhang.\n" +"!! this is a very slow algorithm (it uses the same results as " +"extra_perimeters_overhangs) !!" +msgstr "" +"Extrudálja a páratlan rétegeknél a túlnyúlás feletti részeket a fordított " +"irányban. Ez a váltakozó mintázat drasztikusan javíthatja a meredek " +"túlnyúlásokat.\n" +"!!! Ez egy nagyon lassú algoritmus (ugyanazokat az eredményeket használja, " +"mint az extra_perimeters_overhangs) !!!" + +msgid "Reverse threshold" +msgstr "Fordított küszöb" + +msgid "Overhang reversal threshold" +msgstr "Túlnyúlás megfordítási küszöbértéke" + +msgid "" +"Number of mm the overhang need to be for the reversal to be considered " +"useful. Can be a % of the perimeter width." +msgstr "" +"A túlnyúlás millimétereinek száma ahhoz, hogy a visszafordítás hasznosnak " +"minősüljön. Lehet a kerületi szélesség %-ában." + +msgid "No perimeters on bridge areas" +msgstr "A hídterületeken nincs kerület" + +msgid "" +"Experimental option to remove perimeters where there is nothing under them " +"and where a bridged infill should be better. \n" +" * Remove perimeters: remove the unsupported perimeters, leave the bridge " +"area as-is.\n" +" * Keep only bridges: remove the perimeters in the bridge areas, keep only " +"bridges that end in solid area.\n" +" * Keep bridges and overhangs: remove the unsupported perimeters, keep only " +"bridges that end in solid area, fill the rest with overhang perimeters" +"+bridges.\n" +" * Fill the voids with bridges: remove the unsupported perimeters, draw " +"bridges over the whole hole.* !! this one can escalate to problems with " +"overhangs shaped like /\\, so you should use it only on one layer at a time " +"via the height-range modifier!\n" +"!!Computationally intensive!!. " +msgstr "" +"Kísérleti lehetőség a peremek eltávolítására ott, ahol nincs alatta semmi, " +"és ahol egy áthidalt kitöltés jobb lenne. \n" +" * Kerületek eltávolítása: távolítsa el a nem alátámasztott kerületeket, a " +"híd területét hagyja úgy, ahogy van.\n" +" * Csak a hidak megtartása: a hídterületekről eltávolítja a kerületeket, " +"csak a szilárd területen végződő hidakat tartja meg.\n" +" * Tartsa meg a hidakat és a túlnyúlásokat: távolítsa el a nem alátámasztott " +"kerületeket, csak a szilárd területen végződő hidakat tartsa meg, a többit " +"töltse ki túlnyúlások kerületével+hidakkal.\n" +" * Töltse ki az üres helyeket hidakkal: távolítsa el a nem alátámasztott " +"kerületeket, rajzoljon hidakat az egész lyuk fölé. * !!! ez a megoldás a /\\ " +"alakú túlnyúlásoknál problémákhoz vezethet, ezért egyszerre csak egy rétegen " +"használja a magassági tartománymódosítón keresztül!\n" +"!!!Számításigényes!!! " + +msgid "Disabled" +msgstr "Tiltva" + +msgid "Remove perimeters" +msgstr "Kerületek eltávolítása" + +msgid "Keep only bridges" +msgstr "Csak hidakat tart meg" + +msgid "Keep bridges and overhangs" +msgstr "Hidak és a túlnyúlások megtartása" + +msgid "Fill the voids with bridges" +msgstr "Üres helyek kitöltése hidakkal" + +msgid "Filament parking position" +msgstr "Nyomtatószál parkolási pozíció" + +msgid "" +"Distance of the extruder tip from the position where the filament is parked " +"when unloaded. This should match the value in printer firmware. " +msgstr "" +"Az extruder csúcsának távolsága attól a helyzettől, ahol a szálcserekor " +"parkol. Ennek meg kell egyeznie a nyomtató firmware-jében szereplő értékkel. " + +msgid "Extra loading distance" +msgstr "Extra rakodási távolság" + +msgid "" +"When set to zero, the distance the filament is moved from parking position " +"during load is exactly the same as it was moved back during unload. When " +"positive, it is loaded further, if negative, the loading move is shorter " +"than unloading. " +msgstr "" +"Ha nullára van állítva, akkor a nyomtatószálat a betöltés során a " +"parkolóhelyzetből pontosan ugyanannyit mozdítják el, mint amennyit a kiadás " +"során visszatolnak. Ha pozitív, akkor tovább töltődik, ha negatív, akkor a " +"betöltési mozgás rövidebb, mint a kiadás. " + +msgid "Perimeters" +msgstr "Kerületek" + +msgid "Perimeter acceleration" +msgstr "Kerületi gyorsulás" + +msgid "" +"This is the acceleration your printer will use for perimeters. \n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for perimeters." +msgstr "" +"Ez az a gyorsítás, amelyet a nyomtató a kerületekhez használ. \n" +"Lehet az alapértelmezett gyorsulás %-a\n" +"Adjon meg nulla értéket a kerületek gyorsításvezérlésének kikapcsolásához." + +msgid "Round corners" +msgstr "Lekerekített sarkok" + +msgid "Round corners for perimeters" +msgstr "Lekerekített sarkok a kerületekhez" + +msgid "" +"Internal perimeters will go around sharp corners by turning around instead " +"of making the same sharp corner. This can help when there are visible holes " +"in sharp corners on perimeters. It also help to print the letters on the " +"benchy stern.\n" +"Can incur some more processing time, and corners are a bit less sharp." +msgstr "" +"A belső kerületek az éles sarkokat úgy kerülik meg, hogy megfordulnak, " +"ahelyett, hogy ugyanazt az éles sarkot csinálnák meg. Ez akkor segíthet, ha " +"a kerületeken éles sarkokban látható lyukak vannak. Ez is segít a betűk " +"nyomtatásában a padkás faron.\n" +"Valamivel több feldolgozási idővel járhat, és a sarkok kicsit kevésbé élesek." + +msgid "Perimeter extruder" +msgstr "Kerületi extruder" + +msgid "" +"The extruder to use when printing perimeters and brim. First extruder is 1." +msgstr "" +"Az extruder, amelyet a kerület és a perem nyomtatásához használ. Az első " +"extruder az 1." + +msgid "Perimeter width" +msgstr "Kerületi szélesség" + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 105%) " +"it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Állítsa be ezt nem nulla értékre, ha a peremek manuális extrudálási " +"szélességét szeretné beállítani. A pontosabb felületek elérése érdekében " +"érdemes vékonyabb extrudátumokat használni. Ha nulla értéken hagyja, akkor " +"az alapértelmezett extrudálási szélességet fogja használni, ha be van " +"állítva, ellenkező esetben 1,125x fúvókaátmérő lesz használva. Ha " +"százalékban van megadva (pl. 105%), akkor a fúvókaátmérőre lesz kiszámítva.\n" +"A 'Távolság' vagy a 'Szélesség' beállítható; a másik értéket a perem " +"'Átfedés' százalékos értékei és az alapértelmezett rétegmagasság alapján " +"számítja ki a rendszer." + +msgid "Perimeter spacing" +msgstr "Kerületi távolság" + +msgid "" +"Like Perimeter width but spacing is the distance between two perimeter lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Mint a kerületi szélesség, de a távolság a két kerületi vonal közötti " +"távolság (mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Távolság' vagy a 'Szélesség' beállítható; a másik értéket a peremvonal " +"'Átfedés' százalékos értéke és az alapértelmezett rétegmagasság alapján " +"számítja ki a rendszer." + +msgid "Internal" +msgstr "Belső" + +msgid "Internal perimeters speed" +msgstr "Belső kerületi sebesség" + +msgid "" +"Speed for perimeters (contours, aka vertical shells). Set zero for auto." +msgstr "" +"Sebesség a kerületekre (kontúrok, más néven függőleges héjak). Állítsa " +"nullára az automatikus értékhez." + +msgid "Perimeters count" +msgstr "Peremek száma" + +msgid "" +"This option sets the number of perimeters to generate for each layer. Note " +"that Slic3r may increase this number automatically when it detects sloping " +"surfaces which benefit from a higher number of perimeters if the Extra " +"Perimeters option is enabled." +msgstr "" +"Ez az opció beállítja az egyes rétegeknél létrehozandó peremterületek " +"számát. Vegye figyelembe, hogy a Slic3r automatikusan megnövelheti ezt a " +"számot, ha olyan lejtős felületeket észlel, amelyeknek előnyös a nagyobb " +"számú kerület, ha az Extra kerületek opció engedélyezve van." + +msgid "(minimum)." +msgstr "(minimális)." + +msgid "Post-processing scripts" +msgstr "Szkriptek utófeldolgozása" + +msgid "" +"If you want to process the output G-code through custom scripts, just list " +"their absolute paths here. Separate multiple scripts with a semicolon. " +"Scripts will be passed the absolute path to the G-code file as the first " +"argument, and they can access the Slic3r config settings by reading " +"environment variables." +msgstr "" +"Ha a kimeneti G-kódot egyéni szkripteken keresztül akarja feldolgozni, csak " +"adja meg itt az abszolút elérési útvonalakat. Több szkriptet pontosvesszővel " +"válasszon el. A szkriptek első argumentumként a G-kód fájl abszolút elérési " +"útvonalát kapják meg, és a környezeti változók olvasásával hozzáférhetnek a " +"Slic3r konfigurációs beállításaihoz." + +msgid "Custom Printer variables" +msgstr "Egyedi nyomtató változók" + +msgid "Printer type" +msgstr "Nyomtató típus" + +msgid "Type of the printer." +msgstr "A nyomtató típusa." + +msgid "Printer notes" +msgstr "Nyomtató jegyzetek" + +msgid "You can put your notes regarding the printer here." +msgstr "A nyomtatóval kapcsolatos megjegyzéseit itt teheti meg." + +msgid "Printer vendor" +msgstr "Nyomtató gyártója" + +msgid "Name of the printer vendor." +msgstr "A nyomtató gyártójának neve." + +msgid "Printer variant" +msgstr "Nyomtató változat" + +msgid "" +"Name of the printer variant. For example, the printer variants may be " +"differentiated by a nozzle diameter." +msgstr "" +"A nyomtatóváltozat neve. A nyomtatóváltozatokat például a fúvóka átmérője " +"alapján lehet megkülönböztetni." + +msgid "Solid first layer" +msgstr "Tömör első réteg" + +msgid "" +"Use a solid layer instead of a raft for the layer that touches the build " +"plate." +msgstr "Az ággyal érintkező réteghez használjon tömör réteget a raft helyett." + +msgid "Raft layers" +msgstr "Tutaj rétegek" + +msgid "" +"The object will be raised by this number of layers, and support material " +"will be generated under it." +msgstr "" +"Az objektumot ennyi réteggel emeljük meg, és alatta támasztóanyagot hozunk " +"létre." + +msgid "Resolution" +msgstr "Felbontás" + +msgid "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more details than printers can render. Set zero to disable any " +"simplification and use full resolution from input. \n" +"Note: Slic3r has an internal working resolution of 0.0001mm.\n" +"Infill & Thin areas are simplified up to 0.0125mm." +msgstr "" +"Minimális részletfelbontás, a bemeneti fájl egyszerűsítésére szolgál a " +"szeletelési feladat felgyorsítása és a memóriahasználat csökkentése miatt. A " +"nagy felbontású modellek gyakran több részletet tartalmaznak, mint amennyit " +"a nyomtatók renderelni tudnak. A nulla beállítással kikapcsolható minden " +"egyszerűsítés, és a bemenetről származó teljes felbontás használható. \n" +"Megjegyzés: A Slic3r belső felbontása 0,0001mm.\n" +"A kitöltés és a vékony területek 0,0125 mm-ig egyszerűsödnek." + +msgid "Internal resolution" +msgstr "Belső felbontás" + +msgid "" +"Minimum detail resolution, used for internal structures (gapfill and some " +"infill patterns).\n" +"Don't put a too-small value (0.05mm is way too low for many printers), as it " +"may create too many very small segments that may be difficult to display and " +"print." +msgstr "" +"Minimális részletfelbontás, belső struktúrákhoz (hézagkitöltés és néhány " +"kitöltési minta).\n" +"Ne adjon túl kicsi értéket (0,05mm a legtöbb nyomtatónak túl alacsony), mert " +"túl sok nagyon kicsi szegmenst hozhat létre, melyeket nehéz megjeleníteni és " +"nyomtatni." + +msgid "Minimum travel after retraction" +msgstr "Minimális út behúzás után" + +msgid "" +"Retraction is not triggered when travel moves are shorter than this length." +msgstr "A behúzás nem lép működésbe, ha a mozgások hossza ennél rövidebb." + +msgid "Retract amount before wipe" +msgstr "Visszahúzott mennyiség törlés előtt" + +msgid "" +"With bowden extruders, it may be wise to do some amount of quick retract " +"before doing the wipe movement." +msgstr "" +"A bowdenes extruderekkel célszerű lehet, ha a törlőmozgást megelőzően " +"bizonyos mennyiségű gyors visszahúzást végez." + +msgid "Retract on layer change" +msgstr "Visszahúzás rétegváltáskor" + +msgid "This flag enforces a retraction whenever a Z move is done (before it)." +msgstr "" +"Ez a jelző visszavonást kényszerít, amikor egy Z lépés történik (előtte)." + +msgid "Length" +msgstr "Hossz" + +msgid "Retraction Length" +msgstr "Visszahúzási hossz" + +msgid "" +"When retraction is triggered, filament is pulled back by the specified " +"amount (the length is measured on raw filament, before it enters the " +"extruder)." +msgstr "" +"Amikor a visszahúzás beindul, a szál a megadott mennyiséggel visszahúzódik " +"(a hosszúságot a nyers szálon mérik, ami az extruder előtt van)." + +msgid "mm (zero to disable)" +msgstr "mm (nulla a letiltáshoz)" + +msgid "Retraction length" +msgstr "Visszahúzási hossz" + +msgid "" +"Override the retract_length setting from the printer config. Used for " +"calibration. Set negative to disable" +msgstr "" +"A nyomtató konfigjában megadott retract_length érték felülírása. " +"Kalibráláshoz használatos. Negatív érték letiltja" + +msgid "Retraction Length (Toolchange)" +msgstr "Visszahúzási hossz (szerszámcsere)" + +msgid "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder).\n" +"Note: This value will be unretracted when this extruder will load the next " +"time." +msgstr "" +"Ha a visszahúzás a fejcsere előtt aktiválódik, a szál a megadott " +"mennyiséggel visszahúzódik (a hosszúságot a nyers szálon mérik, ami az " +"extruder előtt van).\n" +"Megjegyzés: Ez az érték lesz visszahúzva, amikor ez az extruder legközelebb " +"betölt." + +msgid "Lift Z" +msgstr "Z emelés" + +msgid "" +"If you set this to a positive value, Z is quickly raised every time a " +"retraction is triggered. When using multiple extruders, only the setting for " +"the first extruder will be considered." +msgstr "" +"Ha ezt pozitív értékre állítja, a Z minden alkalommal gyorsan megemelkedik, " +"amikor a visszahúzás elindul. Több extruder használata esetén csak az első " +"extruder beállítása lesz figyelembe véve." + +msgid "Above Z" +msgstr "Z felett" + +msgid "Only lift Z above" +msgstr "Csak a Z-t emelje feljebb" + +msgid "" +"If you set this to a positive value, Z lift will only take place above the " +"specified absolute Z. You can tune this setting for skipping lift on the " +"first layers." +msgstr "" +"Ha ezt pozitív értékre állítja, a Z emelés csak a megadott abszolút Z felett " +"történik. Ezt a beállítást az első rétegek emelésének kihagyásához " +"hangolhatja." + +msgid "Below Z" +msgstr "Z alatt" + +msgid "Only lift Z below" +msgstr "Csak a Z-t emelje fel" + +msgid "" +"If you set this to a positive value, Z lift will only take place below the " +"specified absolute Z. You can tune this setting for limiting lift to the " +"first layers." +msgstr "" +"Ha ezt pozitív értékre állítja, a Z emelés csak a megadott abszolút Z alatt " +"történik. Ezt a beállítást úgy hangolhatja, hogy az emelést az első " +"rétegekre korlátozza." + +msgid "Enforce on first layer" +msgstr "Kényszerítés az első rétegen" + +msgid "Enforce lift on first layer" +msgstr "Az első réteg felhúzásának kényszerítése" + +msgid "" +"Select this option to enforce z-lift on the first layer.\n" +"Useful to still use the lift on the first layer even if the 'Only lift Z " +"below' (retract_lift_above) is higher than 0." +msgstr "" +"Válassza ezt az opciót, ha a Z-emelést az első rétegre kívánja " +"kényszeríteni.\n" +"Hasznos, ha az első rétegen akkor is használjuk az emelést, ha a 'Csak alsó " +"Z emelés' (retract_lift_above) értéke 0-nál nagyobb." + +msgid "On surfaces" +msgstr "Felületeken" + +msgid "Lift only on" +msgstr "Emelés csak" + +msgid "Select this option to not use/enforce the z-lift on a top surface." +msgstr "" +"Válassza ezt az opciót, ha nem kívánja használni/megerősíteni a Z-emelést a " +"felső felületen." + +msgid "Extra length on restart" +msgstr "Extra hossz az újraindításkor" + +msgid "" +"When the retraction is compensated after the travel move, the extruder will " +"push this additional amount of filament. This setting is rarely needed." +msgstr "" +"Amikor a visszahúzás kompenzálásra kerül az elmozdulás után, az extruder ezt " +"a további szálmennyiséget tolja ki. Erre a beállításra ritkán van szükség." + +msgid "Extrat length on toolchange restart" +msgstr "Extrat hossz a szerszámcsere újraindításakor" + +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament (but not on the first extruder after " +"start, as it should already be loaded)." +msgstr "" +"Amikor a visszahúzás kompenzálásra kerül a szerszámváltás után, az extruder " +"ezt a további szálmennyiséget tolja ki (de nem az indítás utáni első " +"extruderen, mivel annak már be kell lennie töltve)." + +msgid "Retraction Speed" +msgstr "Visszahúzási sebesség" + +msgid "The speed for retractions (this only applies to the extruder motor)." +msgstr "A behúzási sebesség (ez csak az extruder motorjára vonatkozik)." + +msgid "Deretraction Speed" +msgstr "Kivonási sebesség" + +msgid "" +"The speed for loading of a filament into extruder after retraction (this " +"only applies to the extruder motor). If left as zero, the retraction speed " +"is used." +msgstr "" +"Az extruderbe visszahúzás után a szál betöltésének sebessége (ez csak az " +"extrudermotorra vonatkozik). Ha nulla marad, akkor a visszahúzási sebességet " +"használja a rendszer." + +msgid "" +"Position of perimeters' starting points.\n" +" " +msgstr "" +"A kerület kezdőpontjainak helyzete.\n" +" " + +msgid "Cost-based" +msgstr "Költségalapú" + +msgid "Random" +msgstr "Véletlen" + +msgid "Aligned" +msgstr "Igazított" + +msgid "Angle cost" +msgstr "Szögköltség" + +msgid "Seam angle cost" +msgstr "Varrásszög költsége" + +msgid "" +"Cost of placing the seam at a bad angle. The worst angle (max penalty) is " +"when it's flat." +msgstr "" +"A varrat rossz szögben történő elhelyezésének költsége. A legrosszabb szög " +"(maximális hiba) az, ha lapos." + +msgid "Travel cost" +msgstr "Utazási költség" + +msgid "Seam travel cost" +msgstr "Varrás utazási költsége" + +msgid "" +"Cost of moving the extruder. The highest penalty is when the point is the " +"furthest from the position of the extruder before extruding the external " +"perimeter" +msgstr "" +"Az extruder áthelyezésének költségei. A legnagyobb baj akkor van, amikor a " +"pont a legtávolabb van az extruder pozíciójától a külső kerület extrudálása " +"előtt" + +msgid "Seam gap" +msgstr "Varrás hézag" + +msgid "" +"To avoid visible seam, the extrusion can be stoppped a bit before the end of " +"the loop.\n" +"Can be a mm or a % of the current extruder diameter." +msgstr "" +"A látható varrat elkerülése érdekében az extrudálás egy kicsit a hurok vége " +"előtt megállítható.\n" +"Ez lehet mm vagy az extruder aktuális átmérőjének egy %-a." + +msgid "Direction" +msgstr "Irány" + +msgid "Preferred direction of the seam" +msgstr "A varrat preferált iránya" + +msgid "Seam preferred direction" +msgstr "A varrás előnyben részesített iránya" + +msgid "Jitter" +msgstr "Remegés" + +msgid "Seam preferred direction jitter" +msgstr "A varrat előnyben részesített iránya remegés" + +msgid "Preferred direction of the seam - jitter" +msgstr "A varrat preferált iránya - remegés" + +msgid "Skirt brim" +msgstr "Szoknya perem" + +msgid "Extra skirt lines on the first layer." +msgstr "Extra szoknyavonalak az első rétegben." + +msgid "lines" +msgstr "vonalak" + +msgid "Distance from object" +msgstr "Távolság a tárgytól" + +msgid "" +"Distance between skirt and object(s). Set zero to attach the skirt to the " +"object(s) and get a brim for better adhesion." +msgstr "" +"A szoknya és a tárgy(ak) közötti távolság. Állítsa be a nullát, hogy a " +"szoknyát a tárgy(ak)hoz rögzítse, és a jobb tapadás érdekében kapjon peremet." + +msgid "from brim" +msgstr "peremtől" + +msgid "Skirt distance from brim" +msgstr "Szoknyatávolság a peremtől" + +msgid "The distance is computed from the brim and not from the objects" +msgstr "A távolságot a peremtől és nem a tárgyaktól kell számítani" + +msgid "Skirt height" +msgstr "Szoknya magassága" + +msgid "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." +msgstr "" +"A szoknya magassága rétegekben kifejezve. Állítsa ezt magas értékre, ha a " +"szoknyát a huzat elleni védőpajzsként kívánja használni." + +msgid "Skirt width" +msgstr "Szoknya szélessége" + +msgid "" +"Horizontal width of the skirt that will be printed around each object. If " +"left as zero, first layer extrusion width will be used if set and the skirt " +"is only 1 layer height, or perimeter extrusion width will be used (using the " +"computed value if not set)." +msgstr "" +"Az egyes objektumok köré nyomtatott szoknya vízszintes szélessége. Ha nullán " +"hagyja, akkor az első réteg extrudálási szélessége lesz használva, ha be van " +"állítva, és a szoknya csak 1 réteg magasságú, vagy a perem extrudálási " +"szélessége lesz használva (a számított értéket használja, ha nincs " +"beállítva)." + +msgid "Loops (minimum)" +msgstr "Hurkok (minimum)" + +msgid "Skirt Loops" +msgstr "Szoknya hurkok" + +msgid "" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"zero to disable skirt completely." +msgstr "" +"A szoknyahurkok száma. Ha a Minimális extrudálási hossz opció be van " +"állítva, a hurkok száma nagyobb lehet, mint az itt beállított. A szoknya " +"teljes kikapcsolásához állítsa be a nullát." + +msgid "Slow down if layer print time is below" +msgstr "Lassítson, ha a réteg nyomtatási ideje" + +msgid "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value, if possible.\n" +"Set zero to disable." +msgstr "" +"Ha a rétegnyomtatási idő becsült értéke ez alatt a másodpercszám alatt van, " +"a nyomtatási mozgások sebessége csökken, hogy a nyomtatási időt lehetőség " +"szerint erre az értékre növelje.\n" +"Letiltáshoz állítsa be a nullát." + +msgid "Small perimeters speed" +msgstr "Kis kerületi sebesség" + +msgid "" +"This separate setting will affect the speed of perimeters having radius <= " +"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " +"be calculated on the perimeters speed setting above.\n" +"Set zero to disable." +msgstr "" +"Ez a különálló beállítás a <= 6,5 mm sugarú körvonalak (általában lyukak) " +"sebességét befolyásolja. Ha százalékban van megadva (például: 80%), akkor a " +"fenti peremkerületek sebességének beállítása alapján kerül kiszámításra.\n" +"A nulla beállítással kikapcsolható." + +msgid "Min length" +msgstr "Min. hossz" + +msgid "Min small perimeters length" +msgstr "Min. kis kerületi hossz" + +msgid "" +"This sets the threshold for small perimeter length. Every loop with a length " +"lower than this will be printed at small perimeter speed\n" +"Can be a mm value or a % of the nozzle diameter." +msgstr "" +"Ez határozza meg a kis kerület hosszának küszöbértékét. Minden olyan hurok, " +"amelynek hossza ennél kisebb, kis kerületi sebességgel lesz kinyomtatva.\n" +"Lehet mm-es érték vagy a fúvóka átmérőjének %-a." + +msgid "Max length" +msgstr "Max. hossz" + +msgid "Max small perimeters length" +msgstr "Max. kis kerületi hossz" + +msgid "" +"This sets the end of the threshold for small perimeter length. Every " +"perimeter loop lower than this will see their speed reduced a bit, from " +"their normal speed at this length down to small perimeter speed.\n" +"Can be a mm or a % of the nozzle diameter." +msgstr "" +"Ez határozza meg a kis kerületi hosszra vonatkozó küszöbérték végét. Minden " +"ennél alacsonyabb kerületi hurok esetében a sebesség egy kicsit csökken, a " +"normál sebességről ezen a hosszon a kis kerületi sebességre.\n" +"Lehet egy mm vagy a fúvóka átmérőjének egy %-a." + +msgid "Min convex angle" +msgstr "Min. konvex szög" + +msgid "Curve smoothing minimum angle (convex)" +msgstr "Görbe simítás minimális szöge (konvex)" + +msgid "" +"Minimum (convex) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimális (konvex) szög egy csúcsnál, hogy lehetővé tegye a simítást (görbét " +"próbál létrehozni a csúcs körül). 180: semmi sem lesz simítva, 0: minden " +"szöget simít." + +msgid "Min concave angle" +msgstr "Min. homorú szög" + +msgid "Curve smoothing minimum angle (concave)" +msgstr "Görbe simítás minimális szöge (homorú)" + +msgid "" +"Minimum (concave) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimális (homorú) szög egy csúcsnál, hogy lehetővé tegye a simítást (görbét " +"próbál létrehozni a csúcs körül). 180: semmi sem lesz simítva, 0: minden " +"szöget simít." + +msgid "Precision" +msgstr "Precíziós" + +msgid "Curve smoothing precision" +msgstr "Görbe simítás pontossága" + +msgid "" +"These parameters allow the slicer to smooth the angles in each layer. The " +"precision will be at least the new precision of the curve. Set to 0 to " +"deactivate.\n" +"Note: as it uses the polygon's edges and only works in the 2D planes, you " +"must have a very clean or hand-made 3D model.\n" +"It's really only useful to smoothen functional models or very wide angles." +msgstr "" +"Ezek a paraméterek lehetővé teszik, hogy a szeletelő az egyes rétegek " +"szögeit simítsa. A pontosság legalább a görbe új pontossága lesz. A " +"kikapcsoláshoz állítsa 0-ra.\n" +"Megjegyzés: mivel a poligon éleit használja, és csak a 2D-s síkokban " +"működik, nagyon tiszta vagy kézzel készített 3D-s modellre van szükség.\n" +"Valójában csak funkcionális modellek vagy nagyon széles szögek simításához " +"hasznos." + +msgid "cutoff" +msgstr "levágás" + +msgid "Curve smoothing cutoff dist" +msgstr "Görbe simító vágási távolság" + +msgid "" +"Maximum distance between two points to allow adding new ones. Allow to avoid " +"distorting long strait areas.\n" +"Set zero to disable." +msgstr "" +"Két pont közötti maximális távolság, amely lehetővé teszi új pontok " +"hozzáadását. A hosszú egyenes területek torzításának elkerülése érdekében.\n" +"Letiltáshoz állítsa nullára." + +msgid "Solid infill threshold area" +msgstr "Tömör kitöltési küszöbterület" + +msgid "" +"Force solid infill for regions having a smaller area than the specified " +"threshold." +msgstr "" +"Tömör kitöltés kikényszerítése a megadott küszöbértéknél kisebb területű " +"régiók esetében." + +msgid "mm²" +msgstr "mm²" + +msgid "Solid infill extruder" +msgstr "Tömör kitöltő extruder" + +msgid "The extruder to use when printing solid infill." +msgstr "A tömör kitöltőanyag nyomtatásához használt extruder." + +msgid "Solid infill every" +msgstr "Tömör kitöltés minden" + +msgid "" +"This feature allows you to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." +msgstr "" +"Ez a funkció lehetővé teszi, hogy adott számú rétegenként egy tömör réteget " +"kényszerítsen ki. Nulla a letiltáshoz. Ezt bármilyen értékre beállíthatja " +"(például 9999); a Slic3r automatikusan kiválasztja a maximálisan lehetséges " +"kombinálandó rétegek számát a fúvóka átmérőjének és a rétegmagasságnak " +"megfelelően." + +msgid "Solid infill width" +msgstr "Tömör kitöltés szélessége" + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left as zero, default extrusion width will be used if " +"set, otherwise 1.125 x nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Állítsa be ezt nem nulla értékre, ha kézi extrudálási szélességet szeretne " +"beállítani a tömör felületek kitöltéséhez. Ha nulla értéken hagyja, akkor az " +"alapértelmezett extrudálási szélesség kerül alkalmazásra, ha be van állítva, " +"ellenkező esetben 1,125 x fúvókaátmérő lesz használva. Ha százalékban van " +"megadva (például 110%), akkor a fúvóka átmérője alapján kerül kiszámításra.\n" +"A 'Távolság' vagy a 'Szélesség:' értéket is megadhatja; a másik értéket az " +"alapértelmezett rétegmagasság felhasználásával számítja ki a rendszer." + +msgid "Solid spacing" +msgstr "Tömör távolság" + +msgid "Solid infill spacing" +msgstr "Tömör kitöltési távolság" + +msgid "" +"Like Solid infill width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Mint a tömör kitöltés szélessége, de a távolságtartás a két vonal közötti " +"távolság (mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Távolság' vagy a 'Szélesség' értéket állíthatod be; a másik értéket a " +"rendszer kiszámítja, az alapértelmezett rétegmagasságot használva." + +msgid "Solid" +msgstr "Tömör" + +msgid "Solid infill speed" +msgstr "Tömör kitöltési sebesség" + +msgid "" +"Speed for printing solid regions (top/bottom/internal horizontal shells). " +"This can be expressed as a percentage (for example: 80%) over the default " +"infill speed. Set zero for auto." +msgstr "" +"Sebesség a tömör régiók nyomtatásához (felső/alsó/belső vízszintes héjak). " +"Ez az alapértelmezett kitöltési sebességhez képest százalékban (például: " +"80%) fejezhető ki. Az automatikus értéket nullára állítsa be." + +msgid "Solid layers" +msgstr "Tömör rétegek" + +msgid "Number of solid layers to generate on top and bottom surfaces." +msgstr "A felső és alsó felületeken létrehozandó tömör rétegek száma." + +msgid "Minimum thickness of a top / bottom shell" +msgstr "A felső/alsó héj minimális vastagsága" + +msgid "Spiral vase" +msgstr "Spirális váza" + +msgid "" +"This feature will raise Z gradually while printing a single-walled object in " +"order to remove any visible seam. This option requires a single perimeter, " +"no infill, no top solid layers and no support material. You can still set " +"any number of bottom solid layers as well as skirt/brim loops. It won't work " +"when printing more than one single object." +msgstr "" +"Ez a funkció fokozatosan megemeli a Z értéket az egyfalú objektum nyomtatása " +"közben, hogy eltávolítsa a látható varratokat. Ez az opció egyetlen kerület, " +"kitöltés, felső tömör rétegek és támasztóanyag nélkül. Továbbra is " +"beállíthat tetszőleges számú alsó tömör réteget, valamint szoknya-/" +"szegélyhurkokat. Egynél több objektum nyomtatásakor nem fog működni." + +msgid "Temperature variation" +msgstr "Hőmérsékletváltozás" + +msgid "" +"Temperature difference to be applied when an extruder is not active. Enables " +"a full-height \"sacrificial\" skirt on which the nozzles are periodically " +"wiped." +msgstr "" +"Hőmérsékletkülönbség, amelyet akkor kell alkalmazni, ha az extruder nem " +"aktív. Lehetővé teszi egy teljes magasságú \"áldozati\" szegélyt, amelyen a " +"fúvókákat időszakosan letörlik." + +msgid "Start G-code" +msgstr "G-kód indítása" + +msgid "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder has just started heating, but before " +"extruder has finished heating. If Slic3r detects M104 or M190 in your custom " +"codes, such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S{first_layer_temperature}\" command wherever you want.\n" +" placeholders: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, " +"bounding_box[minx,miny,maxx,maxy]" +msgstr "" +"Ez az indítási eljárás az elején kerül beiktatásra, miután az ágy elérte a " +"célhőmérsékletet és az extruder épp elkezdte a fűtést, de még a befejezése " +"előtt van. Ha a Slic3r az M104 vagy M190 parancsot észleli az egyéni " +"kódokban, akkor ezek a parancsok nem lesznek automatikusan előre téve, így " +"Ön szabadon testre szabhatja a fűtési parancsok és más egyéni műveletek " +"sorrendjét. Ne feledje, hogy minden Slic3r-beállításhoz használhat helyőrző " +"változókat, így bárhová beírhat egy \"M109 S{first_layer_temperature}\" " +"parancsot.\n" +" helyőrző: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, " +"bounding_box[minx,miny,maxx,maxy]" + +msgid "Only custom Start G-code" +msgstr "Csak egyéni Start G-kód" + +msgid "" +"Ensure that the slicer won't add heating, fan, extruder... commands before " +"or just after your start-gcode.If set to true, you have to write a good and " +"complete start_gcode, as no checks are made anymore." +msgstr "" +"Biztosítja, hogy a szeletelő ne adjon fűtés, ventilátor, extruder... " +"parancsokat a start-G-kód előtt vagy után. Ha true-ra van állítva, akkor egy " +"jó és teljes start_gcode-ot kell írni, mivel már nem történik ellenőrzés." + +msgid "Filament start G-code" +msgstr "Szál indítási G-kód" + +msgid "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode (and after any toolchange to this filament in case of multi-material " +"printers). This is used to override settings for a specific filament. If " +"Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " +"will not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S{first_layer_temperature}\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." +msgstr "" +"Ez az indítási eljárás az elején, a nyomtató indítási G-kódja után (és több " +"anyagból készült nyomatok esetén az adott szálra történő szerszámváltás " +"után) kerül beillesztésre. Ez egy adott szálra vonatkozó beállítások " +"felülbírálására szolgál. Ha a Slic3r az M104, M109, M140 vagy M190 kódokat " +"észleli az egyéni kódokban, akkor ezek a parancsok nem lesznek automatikusan " +"előfűzve, így Ön szabadon testre szabhatja a fűtési parancsok és egyéb " +"egyéni műveletek sorrendjét. Ne feledje, hogy minden Slic3r-beállításhoz " +"használhat helyőrző változókat, így bárhová beírhat egy \"M109 " +"S{first_layer_temperature}\" parancsot. Ha több extruderrel rendelkezik, a G-" +"kód az extruder sorrendjében kerül feldolgozásra." + +msgid "Model rounding precision" +msgstr "A modell kerekítési pontossága" + +msgid "" +"This is the rounding error of the input object. It's used to align points " +"that should be in the same line.\n" +"Set zero to disable." +msgstr "" +"Ez a bemeneti objektum kerekítési hibája. Olyan pontok igazítására szolgál, " +"amelyeknek egy vonalban kellene lenniük.\n" +"A kikapcsoláshoz állítson be nullát." + +msgid "Color change G-code" +msgstr "Színváltás G-kód" + +msgid "This G-code will be used as a code for the color change" +msgstr "Ez a G-kód lesz a színváltás kódjaként használva" + +msgid "Pause Print G-code" +msgstr "Nyomtatási szünet G-kód" + +msgid "This G-code will be used as a code for the pause print" +msgstr "Ez a G-kód lesz a nyomtatási szünet kódjaként használva" + +msgid "Custom G-code" +msgstr "Egyedi G-kód" + +msgid "This G-code will be used as a custom code" +msgstr "Ezt a G-kódot egyéni kódként fogjuk használni" + +msgid "Single Extruder Multi Material" +msgstr "Egyetlen extruder több anyag" + +msgid "The printer multiplexes filaments into a single hot end." +msgstr "A nyomtató a szálakat egyetlen forró végbe multiplexeli." + +msgid "Prime all printing extruders" +msgstr "Az összes nyomtató extruder alapozása" + +msgid "" +"If enabled, all printing extruders will be primed at the front edge of the " +"print bed at the start of the print." +msgstr "" +"Ha engedélyezve van, akkor a nyomtatás kezdetén az összes nyomtató extruder " +"a nyomtatóágy elülső szélénél lesz alapozva." + +msgid "No sparse layers (EXPERIMENTAL)" +msgstr "Nincsenek ritkás rétegek (Kísérleti)" + +msgid "" +"If enabled, the wipe tower will not be printed on layers with no " +"toolchanges. On layers with a toolchange, extruder will travel downward to " +"print the wipe tower. User is responsible for ensuring there is no collision " +"with the print." +msgstr "" +"Ha engedélyezve van, a törlőtorony nem lesz nyomtatva a szerszámváltás " +"nélküli rétegekre. A szerszámcserével rendelkező rétegeken az extruder " +"lefelé halad a törlőtorony nyomtatásához. A felhasználó felelős azért, hogy " +"ne legyen ütközés a nyomtatással." + +msgid "No solid infill over" +msgstr "Nincs tömör kitöltés" + +msgid "No solid infill over perimeters" +msgstr "Nincs tömör kitöltés a kerületeken" + +msgid "" +"In sloping areas, when you have a number of top / bottom solid layers and " +"few perimeters, it may be necessary to put some solid infill above/below " +"the perimeters to fulfill the top/bottom layers criteria.\n" +"By setting this to something higher than 0, you can control this behaviour, " +"which might be desirable if \n" +"undesirable solid infill is being generated on slopes.\n" +"The number set here indicates the number of layers between the inside of the " +"part and the air at and beyond which solid infill should no longer be added " +"above/below. If this setting is equal or higher than the top/bottom solid " +"layer count, it won't do anything. If this setting is set to 1, it will " +"evict all solid fill above/below perimeters. \n" +"Set zero to disable.\n" +"!! ensure_vertical_shell_thickness needs to be activated so this algorithm " +"can work !!." +msgstr "" +"Lejtős területeken, amikor számos felső/alsó tömör réteggel és kevés " +"peremmel rendelkezik, szükség lehet arra, hogy a peremek fölé/alá tömör " +"kitöltést helyezzen el, hogy teljesítse a felső/alsó rétegek kritériumait.\n" +"A 0-nál nagyobb értékre állítva ezt a viselkedést szabályozhatja, ami " +"kívánatos lehet, ha nemkívánatos tömör kitöltés keletkezik a lejtőkön.\n" +"Az itt beállított szám jelzi, hogy hány réteg van az alkatrész belseje és a " +"levegő között, amelynél és azon túl a szilárd kitöltés már nem adható hozzá " +"felül/alul. Ha ez a beállítás egyenlő vagy nagyobb, mint a felső/alsó " +"szilárd rétegszám, akkor nem csinál semmit. Ha ez a beállítás 1-re van " +"állítva, akkor minden szilárd kitöltést kiűz a peremterületek felett/" +"alatt. \n" +"Ha nullát állít be, akkor letiltja.\n" +"!! ensure_vertical_shell_thickness aktiválva kell lennie, hogy ez az " +"algoritmus működhessen !!." + +msgid "Generate support material" +msgstr "Támaszanyag létrehozása" + +msgid "Enable support material generation." +msgstr "Támaszanyag-generálás engedélyezése." + +msgid "Auto generated supports" +msgstr "Automatikusan generált támaszok" + +msgid "" +"If checked, supports will be generated automatically based on the overhang " +"threshold value. If unchecked, supports will be generated inside the " +"\"Support Enforcer\" volumes only." +msgstr "" +"Ha be van jelölve, a támaszok automatikusan generálódnak a túlnyúlás " +"küszöbértéke alapján. Ha nincs bejelölve, a támaszok csak a \"Support " +"Enforcer\" köteteken belül lesznek generálva." + +msgid "XY separation between an object and its support" +msgstr "XY elválasztás egy tárgy és a tartószerkezet között" + +msgid "" +"XY separation between an object and its support. If expressed as percentage " +"(for example 50%), it will be calculated over external perimeter width." +msgstr "" +"XY elválasztás egy tárgy és a tartószerkezet között. Ha százalékban van " +"megadva (például 50%), akkor a külső kerület szélességére kell számítani." + +msgid "Pattern angle" +msgstr "Minta szög" + +msgid "Support pattern angle" +msgstr "Támasztási mintázat szöge" + +msgid "" +"Use this setting to rotate the support material pattern on the horizontal " +"plane." +msgstr "" +"Ezzel a beállítással elforgathatja a támaszanyag mintázatát a vízszintes " +"síkban." + +msgid "" +"Only create support if it lies on a build plate. Don't create support on a " +"print." +msgstr "" +"Csak akkor hozzon létre támasztékot, ha az egy építőlemezen fekszik. Ne " +"hozzon létre támasztékot a nyomtatáson." + +msgid "Type" +msgstr "Típus" + +msgid "Support contact distance type" +msgstr "Támasz érintkezési távolság típusa" + +msgid "" +"How to compute the vertical z-distance.\n" +"From filament: it uses the nearest bit of the filament. When a bridge is " +"extruded, it goes below the current plane.\n" +"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is " +"extruded.\n" +"None: No z-offset. Useful for Soluble supports.\n" +msgstr "" +"A függőleges z-távolság kiszámítása.\n" +"A nyomtatószálból: a szál legközelebbi bitjét használja. Amikor egy híd " +"extrudálódik, az az aktuális sík alá kerül.\n" +"A síkból: a sík-Z-t használja. Ugyanaz, mint a 'nyomtatószálból', ha nincs " +"'híd' extrudálva.\n" +"Nincs: Nincs Z-eltolás. Hasznos az oldható támaszok esetében.\n" + +msgid "From filament" +msgstr "Nyomtatószálból" + +msgid "From plane" +msgstr "Síkból" + +msgid "None (soluble)" +msgstr "Nincs (oldható)" + +msgid "Contact distance on top of supports" +msgstr "Érintkezési távolság a támaszok tetején" + +msgid "" +"The vertical distance between support material interface and the object(when " +"the object is printed on top of the support). Setting this to 0 will also " +"prevent Slic3r from using bridge flow and speed for the first object layer. " +"Can be a % of the extruding width used for the interface layers." +msgstr "" +"A támaszanyag és a tárgy közötti függőleges távolság (ha a tárgy a támasz " +"tetejére van nyomtatva). Ennek 0-ra állítása megakadályozza azt is, hogy a " +"Slic3r az első tárgyrétegnél a híd áramlását és sebességét használja. Lehet " +"a határfelületi rétegeknél használt extrudálási szélesség %-a." + +msgid "Contact distance under the bottom of supports" +msgstr "Érintkezési távolság a támaszok alja alatt" + +msgid "" +"The vertical distance between object and support material interface(when the " +"support is printed on top of the object). Can be a % of the extruding width " +"used for the interface layers." +msgstr "" +"A függőleges távolság a tárgy és a támaszanyag határfelülete között (amikor " +"a támaszt a tárgy tetejére nyomtatják). Lehet a határfelületi rétegekhez " +"használt extrudálási szélesség %-a." + +msgid "Enforce support for the first" +msgstr "Támaszték biztosítása az első" + +msgid "" +"Generate support material for the specified number of layers counting from " +"bottom, regardless of whether normal support material is enabled or not and " +"regardless of any angle threshold. This is useful for getting more adhesion " +"of objects having a very thin or poor footprint on the build plate." +msgstr "" +"Támogatóanyagot generál a megadott számú réteghez, alulról számolva, " +"függetlenül attól, hogy a normál támogatóanyag engedélyezve van-e vagy sem, " +"és függetlenül bármilyen szögküszöbtől. Ez hasznos a nagyon vékony vagy " +"gyenge talppal rendelkező objektumok nagyobb tapadásának eléréséhez az ágyon." + +msgid "Enforce support for the first n layers" +msgstr "Az első n réteg támogatásának kikényszerítése" + +msgid "Support material extruder" +msgstr "Támaszanyag-extruder" + +msgid "" +"The extruder to use when printing support material (1+, 0 to use the current " +"extruder to minimize tool changes)." +msgstr "" +"A hordozóanyag nyomtatásához használandó extruder (1+, 0 az aktuális " +"extruder használatához a szerszámcserék minimalizálása érdekében)." + +msgid "Support material width" +msgstr "Támaszanyag szélessége" + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left as zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter." +msgstr "" +"Állítsa ezt a nullától eltérő értékre a hordozóanyag kézi extrudálási " +"szélességének beállításához. Ha nulla marad, akkor az alapértelmezett " +"extrudálási szélesség kerül felhasználásra, ha be van állítva, ellenkező " +"esetben a fúvóka átmérője lesz használatos. Ha százalékban adja meg (például " +"110%), akkor a fúvóka átmérője alapján lesz számolva." + +msgid "Interface loops" +msgstr "Interfész hurkok" + +msgid "" +"Cover the top contact layer of the supports with loops. Disabled by default." +msgstr "" +"Fedje le a tartók felső érintkezési rétegét hurkokkal. Alapértelmezés " +"szerint letiltva." + +msgid "Support material/raft interface extruder" +msgstr "Támaszanyag/tutaj interfész extruder" + +msgid "" +"The extruder to use when printing support material interface (1+, 0 to use " +"the current extruder to minimize tool changes). This affects raft too." +msgstr "" +"A támaszanyag-felület nyomtatásakor használandó extruder (1+, 0 az aktuális " +"extruder használatához a szerszámváltások minimalizálása érdekében). Ez " +"hatással van a tutajra is." + +msgid "Interface layers" +msgstr "Interfész rétegek" + +msgid "" +"Number of interface layers to insert between the object(s) and support " +"material." +msgstr "" +"Az objektum(ok) és a tartóanyag közé beillesztendő illesztő rétegek száma." + +msgid "Interface pattern spacing" +msgstr "Felületi mintázat távolsága" + +msgid "Spacing between interface lines. Set zero to get a solid interface." +msgstr "" +"Az interfészvonalak közötti távolság. Ha nullát állítunk be, akkor egy tömör " +"felületet kapunk." + +msgid "Interface" +msgstr "Felület" + +msgid "Support interface speed" +msgstr "Támogatási interfész sebesség" + +msgid "" +"Speed for printing support material interface layers. If expressed as " +"percentage (for example 50%) it will be calculated over support material " +"speed." +msgstr "" +"Sebesség a hordozóanyag-felületi rétegek nyomtatásához. Ha százalékban van " +"megadva (például 50%), akkor a sebességet a hordozóanyag sebességére kell " +"számítani." + +msgid "Support pattern" +msgstr "Támaszték minta" + +msgid "Pattern used to generate support material." +msgstr "Támaszték létrehozásához használt minta." + +msgid "Rectilinear grid" +msgstr "Derékszögű rács" + +msgid "Support interface pattern" +msgstr "Támogatási interfész minta" + +msgid "Pattern for interface layers." +msgstr "Mintázat az interfészrétegekhez." + +msgid "Pattern spacing" +msgstr "Mintatávolság" + +msgid "Spacing between support material lines." +msgstr "Távolság a támaszték vonalak között." + +msgid "Support speed" +msgstr "Támaszték sebessége" + +msgid "Speed for printing support material." +msgstr "A támaszték nyomtatásának sebessége." + +msgid "Synchronize with object layers" +msgstr "Szinkronizálás objektumrétegekkel" + +msgid "" +"Synchronize support layers with the object print layers. This is useful with " +"multi-material printers, where the extruder switch is expensive." +msgstr "" +"A támogatási rétegek szinkronizálása a tárgynyomtatási rétegekkel. Ez több " +"anyagból készült nyomtatóknál hasznos, ahol az extruder váltása költséges." + +msgid "Overhang threshold" +msgstr "Túlnyúlási küszöbérték" + +msgid "" +"Support material will not be generated for overhangs whose slope angle (90° " +"= vertical) is above the given threshold. In other words, this value " +"represent the most horizontal slope (measured from the horizontal plane) " +"that you can print without support material. Set zero for automatic " +"detection (recommended)." +msgstr "" +"A támogatási anyag nem generálódik olyan túlnyúlásokhoz, amelyek lejtési " +"szöge (90° = függőleges) meghaladja a megadott küszöbértéket. Más szóval, ez " +"az érték jelenti a legnagyobb vízszintes lejtést (a vízszintes síkból " +"mérve), amelyet alátámasztó anyag nélkül nyomtathat. Az automatikus " +"felismeréshez állítsa be a nullát (ajánlott)." + +msgid "With sheath around the support" +msgstr "A támaszték körüli burkolattal" + +msgid "" +"Add a sheath (a single perimeter line) around the base support. This makes " +"the support more reliable, but also more difficult to remove." +msgstr "" +"Adjon hozzá egy burkolatot (egyetlen kerületi vonalat) az alaptartó körül. " +"Ez megbízhatóbbá teszi a támasztékot, de nehezebbé is teszi annak " +"eltávolítását." + +msgid "" +"Extruder nozzle temperature for layers after the first one. Set zero to " +"disable temperature control commands in the output G-code." +msgstr "" +"Az extruder fúvóka hőmérséklete az első réteg utáni rétegeknél. A nulla " +"beállításával letilthatja a hőmérséklet-szabályozási parancsokat a kimeneti " +"G-kódban." + +msgid "Nozzle temperature" +msgstr "Fúvóka hőmérséklete" + +msgid "" +"Override the temperature of the extruder. Avoid making too many changes, it " +"won't stop for cooling/heating. 0 to disable. May only work on Height range " +"modifiers." +msgstr "" +"Az extruder hőmérsékletének felülbírálása. Kerülje a túl sok módosítást, nem " +"áll meg a hűtés/fűtés. 0 a letiltáshoz. Csak a magassági tartomány " +"módosítókon működhet." + +msgid "Z-lift override" +msgstr "Z-emelés felülbírálása" + +msgid "" +"Set the new lift-z value for this override. 0 will disable the z-lift. -& to " +"disable. May only work on Height range modifiers." +msgstr "" +"Állítsa be az új lift-z értéket ehhez a felülbíráláshoz. A 0 kikapcsolja a z-" +"emelést. -& a letiltáshoz. Csak a Height range módosítókon működhet." + +msgid "Overlapping external perimeter" +msgstr "Átfedő külső kerület" + +msgid "" +"Allow outermost perimeter to overlap itself to avoid the use of thin walls. " +"Note that flow isn't adjusted and so this will result in over-extruding and " +"undefined behavior." +msgstr "" +"Engedje meg, hogy a legkülső kerület átfedje önmagát, hogy elkerülje a " +"vékony falak használatát. Vegye figyelembe, hogy az áramlás nincs beállítva, " +"így ez túlnyúlást és meghatározatlan viselkedést fog eredményezni." + +msgid "Overlapping all perimeters" +msgstr "Minden határ átfedése" + +msgid "Allow all perimeters to overlap, instead of just external ones." +msgstr "Engedélyezze a határok átfedését, nem csak a külső kerületeket." + +msgid "Thin walls" +msgstr "Vékony falak" + +msgid "" +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace). If unchecked, Slic3r may try to fit " +"perimeters where it's not possible, creating some overlap leading to over-" +"extrusion." +msgstr "" +"Egyetlen szélességű falak felismerése (olyan részek, ahol két extrudálás nem " +"fér el, és egyetlen nyomvonalba kell őket összezsúfolnunk). Ha nincs " +"bejelölve, akkor a Slic3r megpróbálhat olyan kerületeket illeszteni, ahol ez " +"nem lehetséges, és így átfedések keletkeznek, ami túlzott extrudáláshoz " +"vezet." + +msgid "Min width" +msgstr "Min. szélesség" + +msgid "Thin walls min width" +msgstr "Vékony falak min szélesség" + +msgid "" +"Minimum width for the extrusion to be extruded (widths lower than the nozzle " +"diameter will be over-extruded at the nozzle diameter). If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter. The " +"default behavior of PrusaSlicer is with a 33% value. Put 100% to avoid any " +"sort of over-extrusion." +msgstr "" +"Az extrudálandó extrudátum minimális szélessége (a fúvóka átmérőjénél kisebb " +"szélességű extrudátumokat a fúvóka átmérőjénél túl extrudálják). Ha " +"százalékban van megadva (pl. 110%), akkor a fúvóka átmérője felett kell " +"számítani. A PrusaSlicer alapértelmezett viselkedése 33%-os értékkel " +"történik. Tegyen 100%-ot, hogy elkerüljön mindenféle túlnyúlást." + +msgid "Overlap" +msgstr "Átfedés" + +msgid "Thin wall overlap" +msgstr "Vékony fal átfedés" + +msgid "" +"Overlap between the thin wall and the perimeters. Can be a % of the external " +"perimeter width (default 50%)" +msgstr "" +"Átfedés a vékony fal és a peremek között. A külső kerület szélességének %-a " +"lehet (alapértelmezett 50%)." + +msgid "Merging with perimeters" +msgstr "Összeolvadás a kerületekkel" + +msgid "Thin wall merge" +msgstr "Vékony fal egyesítés" + +msgid "" +"Allow the external perimeter to merge the thin walls in the path. You can " +"deactivate this if you are using thin walls as a custom support, to reduce " +"adhesion a little." +msgstr "" +"Hagyja, hogy a külső kerület összeolvadjon a vékony falakkal az útvonalban. " +"Ezt kikapcsolhatja, ha vékony falakat használ egyéni támasztékként, hogy egy " +"kicsit csökkentse a tapadást." + +msgid "Thin walls speed" +msgstr "Vékony falak sebessége" + +msgid "" +"Speed for thin walls (external extrusions that are alone because the obect " +"is too thin at these places)." +msgstr "" +"Sebesség vékony falakhoz (külső extrudálások, amelyek egyedül vannak, mert " +"az obekt túl vékony ezeken a helyeken)." + +msgid "Threads" +msgstr "Szálak" + +msgid "" +"Threads are used to parallelize long-running tasks. Optimal threads number " +"is slightly above the number of available cores/processors." +msgstr "" +"A szálak a hosszú futású feladatok párhuzamosítására szolgálnak. Az " +"optimális szálak száma valamivel a rendelkezésre álló magok/processzorok " +"száma felett van." + +msgid "Time estimation compensation" +msgstr "Időbecslés kompenzáció" + +msgid "" +"This setting allows you to modify the time estimation by a % amount. As " +"Slic3r only uses the Marlin algorithm, it's not precise enough if another " +"firmware is used." +msgstr "" +"Ez a beállítás lehetővé teszi, hogy az időbecslést %-ban módosítsa. Mivel a " +"Slic3r csak a Marlin algoritmust használja, nem elég pontos, ha más firmware-" +"t használ." + +msgid "Tool change G-code" +msgstr "Szerszámcsere G-kód" + +msgid "" +"This custom code is inserted at every extruder change. If you don't leave " +"this empty, you are expected to take care of the toolchange yourself - " +"Slic3r will not output any other G-code to change the filament. You can use " +"placeholder variables for all Slic3r settings as well as {previous_extruder} " +"and {next_extruder}, so e.g. the standard toolchange command can be scripted " +"as T{next_extruder}.!! Warning !!: if any character is written here, Slic3r " +"won't output any toochange command by itself." +msgstr "" +"Ez az egyéni kód minden egyes extruder-váltáskor beillesztésre kerül. Ha ezt " +"nem hagyja üresen, akkor elvárható, hogy a szerszámváltásról maga " +"gondoskodjon - a Slic3r nem fog más G-kódot kiadni a szálcseréhez. " +"Használhat helyőrző változókat az összes Slic3r beállításhoz, valamint a " +"{previous_extruder} és {next_extruder}, így pl. a standard toolchange " +"parancsot T{next_extruder} szkriptként lehet beírni!!! Figyelmeztetés !!!: " +"ha bármilyen karaktert ide írunk, a Slic3r önmagában nem ad ki semmilyen " +"toochange parancsot." + +msgid "Tool name" +msgstr "Eszköz neve" + +msgid "" +"Only used for Klipper, where you can name the extruder. If not set, will be " +"'extruderX' with 'X' replaced by the extruder number." +msgstr "" +"Csak a Klipper esetében használatos, ahol az extruder nevét adhatja meg. Ha " +"nincs beállítva, akkor 'extruderX' lesz, ahol az 'X' helyébe az extruder " +"száma lép." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left as zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Állítsa be ezt a nem nulla értékre, ha a felső felületek kitöltéséhez kézi " +"extrudálási szélességet szeretne beállítani. Érdemes vékonyabb " +"extrudátumokat használni, hogy minden keskeny területet kitöltsön, és simább " +"felületet kapjon. Ha nulla értéken hagyja, akkor az alapértelmezett " +"extrudálási szélességet fogja használni, ha be van állítva, ellenkező " +"esetben a fúvóka átmérőjét fogja használni. Ha százalékban van megadva (pl. " +"110%), akkor a fúvókaátmérőre lesz kiszámítva.\n" +"A 'Spacing' (távolság) vagy a 'Width' (szélesség) beállítható; a másik " +"értéket az alapértelmezett rétegmagasság felhasználásával számítja ki a " +"rendszer." + +msgid "Top solid spacing" +msgstr "Felső tömör távolság" + +msgid "" +"Like Top solid infill width but spacing is the distance between two lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Mint a Top tömör kitöltés szélessége, de a távolság a két vonal közötti " +"távolság (mivel egy kicsit átfedik egymást, ez nem ugyanaz).\n" +"A 'Spacing' vagy a 'Width' értéket állíthatod be; a másik értéket a rendszer " +"kiszámítja, az alapértelmezett rétegmagasságot használva." + +msgid "Top solid" +msgstr "Felső tömör" + +msgid "Top solid speed" +msgstr "Felső tömör sebesség" + +msgid "" +"Speed for printing top solid layers (it only applies to the uppermost " +"external layers and not to their internal solid layers). You may want to " +"slow down this to get a nicer surface finish. This can be expressed as a " +"percentage (for example: 80%) over the solid infill speed above. Set zero " +"for auto." +msgstr "" +"Sebesség a felső tömör rétegek nyomtatásához (csak a legfelső külső " +"rétegekre vonatkozik, a belső tömör rétegekre nem). Ezt érdemes lassítani, " +"hogy szebb felületet kapjon. Ez a fenti tömör kitöltési sebességhez képest " +"százalékban (például: 80%) is kifejezhető. Állítsa be a nullát az " +"automatikus beállításhoz." + +msgid "Top layers" +msgstr "Felső rétegek" + +msgid "Number of solid layers to generate on top surfaces." +msgstr "A felső felületeken létrehozandó tömör rétegek száma." + +msgid "Top solid layers" +msgstr "Felső tömör rétegek" + +msgid "" +"The number of top solid layers is increased above top_solid_layers if " +"necessary to satisfy minimum thickness of top shell. This is useful to " +"prevent pillowing effect when printing with variable layer height." +msgstr "" +"A felső tömör rétegek számát a top_solid_layers felett növeljük, ha " +"szükséges a felső héj minimális vastagságának kielégítéséhez. Ez hasznos a " +"változó rétegmagasságú nyomtatásnál a \"pillowing\" hatás elkerülése " +"érdekében." + +msgid "Minimum top shell thickness" +msgstr "Minimális felső héjvastagság" + +msgid "Travel acceleration" +msgstr "Utazás gyorsítása" + +msgid "" +"Acceleration for travel moves (jumps between distant extrusion points).\n" +"Note that the deceleration of a travel will use the acceleration value of " +"the extrusion that will be printed after it (if any)" +msgstr "" +"Gyorsítás az utazási mozgásokhoz (távoli extrudálási pontok közötti " +"ugrások).\n" +"Vegye figyelembe, hogy az utazás lassítása az utána nyomtatott extrudálás " +"gyorsulási értékét használja (ha van ilyen)." + +msgid "Travel speed" +msgstr "Utazási sebesség" + +msgid "Speed for travel moves (jumps between distant extrusion points)." +msgstr "" +"Az utazási mozgások sebessége (távoli extrudálási pontok közötti ugrások)." + +msgid "Z Travel" +msgstr "Z utazás" + +msgid "Z travel speed" +msgstr "Z utazási sebesség" + +msgid "" +"Speed for movements along the Z axis.\n" +"When set to zero, this value is ignored and regular travel speed is used " +"instead." +msgstr "" +"A Z tengely mentén történő mozgások sebessége.\n" +"Ha nullára van állítva, ezt az értéket figyelmen kívül hagyja, és helyette a " +"normál haladási sebességet használja." + +msgid "Use firmware retraction" +msgstr "Firmware-es visszahúzás használata" + +msgid "" +"This experimental setting uses G10 and G11 commands to have the firmware " +"handle the retraction. This is only supported in recent Marlin." +msgstr "" +"Ez a kísérleti beállítás a G10 és G11 parancsokat használja, hogy a firmware " +"kezelje a behúzást. Ezt csak a legújabb Marlin támogatja." + +msgid "Use relative E distances" +msgstr "Relatív E távolságok használata" + +msgid "" +"If your firmware requires relative E values, check this, otherwise leave it " +"unchecked. Most firmwares use absolute values." +msgstr "" +"Ha a firmware relatív E értékeket igényel, jelölje be ezt a lehetőséget, " +"egyébként hagyja bejelölve. A legtöbb firmware abszolút értékeket használ." + +msgid "Use volumetric E" +msgstr "Használjon volumetrikus E" + +msgid "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." +msgstr "" +"Ez a kísérleti beállítás lineáris milliméter helyett köbmilliméterben adja " +"ki az E értékeket. Ha a firmware még nem ismeri az izzószál átmérő(ke)t, " +"akkor olyan parancsokat adhat, mint az 'M200 D{filament_diameter_0} T0' " +"parancsot a start G-kódba, hogy bekapcsolja a volumetrikus üzemmódot, és a " +"Slic3r-ben kiválasztott izzószálhoz tartozó izzószál-átmérőt használja. Ezt " +"csak a legújabb Marlin támogatja." + +msgid "Enable variable layer height feature" +msgstr "A változó rétegmagasság funkció engedélyezése" + +msgid "" +"Some printers or printer setups may have difficulties printing with a " +"variable layer height. Enabled by default." +msgstr "" +"Egyes nyomtatók vagy nyomtatóbeállítások nehézségekbe ütközhetnek a változó " +"rétegmagasságú nyomtatással. Alapértelmezés szerint engedélyezve." + +msgid "Wipe while retracting" +msgstr "Visszahúzás közben törölje le" + +msgid "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders.\n" +"Note that as a wipe only happens when there is a retraction, the 'only " +"retract when crossing perimeters' print setting can greatly reduce the " +"number of wipes." +msgstr "" +"Ez a jelző a fúvókát visszahúzás közben mozgatja, hogy a szivárgó " +"extrudereknél minimalizálja a lehetséges foltok kialakulását.\n" +"Vegye figyelembe, hogy mivel a törlés csak akkor történik, ha visszahúzás " +"történik, a 'csak a peremek keresztezésekor visszahúzás' nyomtatási " +"beállítás jelentősen csökkentheti a törlések számát." + +msgid "Wipe only when crossing perimeters" +msgstr "Csak a határok átlépésekor törölje le" + +msgid "" +"Don't wipe when you don't cross a perimeter. Need " +"'only_retract_when_crossing_perimeters'and 'wipe' enabled." +msgstr "" +"Ne töröld le, ha nem lépsz át egy határt. Szükség van a " +"'only_retract_when_crossing_perimeters'és a 'wipe' engedélyezésére." + +msgid "Wipe speed" +msgstr "Törlési sebesség" + +msgid "" +"Speed in mm/s of the wipe. If it's faster, it will try to go further away, " +"as the wipe time is set by ( 100% - 'retract before wipe') * 'retaction " +"length' / 'retraction speed'.\n" +"If set to zero, the travel speed is used." +msgstr "" +"A törlő sebessége mm/mp-ben. Ha gyorsabb, akkor megpróbál messzebbre menni, " +"mivel a törlési időt a ( 100% - 'visszahúzás törlés előtt') * 'visszahúzás " +"hossza' / 'visszahúzás sebessége' érték határozza meg.\n" +"Ha nullára van állítva, akkor az utazási sebességet használja." + +msgid "Enable wipe tower" +msgstr "Törlőtorony engedélyezése" + +msgid "" +"Multi material printers may need to prime or purge extruders on tool " +"changes. Extrude the excess material into the wipe tower." +msgstr "" +"A több anyagból nyomtatóknak szerszámváltáskor szükségük lehet az extruderek " +"alapozására vagy tisztítására. Extrudálja a felesleges anyagot a " +"törlőtoronyba." + +msgid "Purging volumes - load/unload volumes" +msgstr "Kötetek tisztítása - kötetek betöltése/kiürítése" + +msgid "" +"This vector saves required volumes to change from/to each tool used on the " +"wipe tower. These values are used to simplify creation of the full purging " +"volumes below. " +msgstr "" +"Ez a vektor megtakarítja a törlőtornyon használt egyes szerszámok közötti " +"váltáshoz szükséges mennyiségeket. Ezek az értékek az alábbi teljes " +"tisztítási kötetek létrehozásának egyszerűsítésére szolgálnak. " + +msgid "Purging volumes - matrix" +msgstr "Tisztítási mennyiségek - mátrix" + +msgid "" +"This matrix describes volumes (in cubic milimetres) required to purge the " +"new filament on the wipe tower for any given pair of tools. " +msgstr "" +"Ez a mátrix bármely adott szerszámpár esetében leírja a törlőtoronyban lévő " +"új szálak tisztításához szükséges térfogatokat (köbmilliméterben). " + +msgid "Enable advanced wiping volume" +msgstr "Fokozott törlési kötet engedélyezése" + +msgid "" +"Allow Slic3r to compute the purge volume via smart computations. Use the " +"pigment% of each filament and following parameters" +msgstr "" +"Engedélyezze, hogy a Slic3r intelligens számítások segítségével kiszámítsa a " +"tisztítási mennyiséget. Használja az egyes szálak pigment %-át és a " +"következő paramétereket" + +msgid "Nozzle volume" +msgstr "Fúvóka térfogata" + +msgid "" +"The volume of melted plastic inside your nozzle. Used by 'advanced wiping'." +msgstr "" +"A fúvókában lévő olvadt műanyag térfogata. A 'fejlett törlés' által használt." + +msgid "mm3" +msgstr "mm3" + +msgid "Pigment percentage" +msgstr "Pigment százalék" + +msgid "" +"The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/" +"natural, 0.2-0.5 for white and 1 for black." +msgstr "" +"A pigment % a szálhoz (0 és 1 között, 1=100%). 0 az áttetsző/természetes, " +"0,2-0,5 a fehér és 1 a fekete." + +msgid "Multiplier" +msgstr "Szorzótényező" + +msgid "Auto-wipe multiplier" +msgstr "Automata törlésszorzó" + +msgid "" +"The volume multiplier used to compute the final volume to extrude by the " +"algorithm." +msgstr "" +"Az algoritmus által extrudálandó végső térfogat kiszámításához használt " +"térfogatszorzó." + +msgid "Auto-wipe algorithm" +msgstr "Automata törlő algoritmus" + +msgid "" +"Algorithm for the advanced wipe.\n" +"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" +"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " +"volume_mult * (pigmentBefore-pigmentAfter)^3\n" +"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / " +"(0.5+pigmentAfter)" +msgstr "" +"Algoritmus a fejlett törléshez.\n" +"Lineáris : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" +"Kvadratikus: térfogat = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " +"volume_mult * (pigmentBefore-pigmentAfter)^3\n" +"Hiperbola: térfogat = nozzle + volume_mult * (0.5+pigmentBefore) / " +"(0.5+pigmentAfter)" + +msgid "Linear" +msgstr "Lineáris" + +msgid "Quadratric" +msgstr "Kvadratikus" + +msgid "Hyperbola" +msgstr "Hiperbola" + +msgid "Wipe tower brim width" +msgstr "Törlőtorony peremszélesség" + +msgid "" +"Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) " +"only one nozzle diameter." +msgstr "" +"A perem szélessége a törlőtorony esetében. Megadható mm-ben vagy a " +"(feltételezett) egyetlen fúvóka átmérőjének %-ában." + +msgid "Wipe tower X" +msgstr "X törlő torony" + +msgid "X coordinate of the left front corner of a wipe tower" +msgstr "A törlőtorony bal első sarkának X-koordinátája" + +msgid "Wipe tower Y" +msgstr "Y törlő torony" + +msgid "Y coordinate of the left front corner of a wipe tower" +msgstr "A törlőtorony bal első sarkának Y koordinátája" + +msgid "Wipe tower Width" +msgstr "Törölje a torony szélességét" + +msgid "Width of a wipe tower" +msgstr "Egy törlőtorony szélessége" + +msgid "Wipe tower rotation angle" +msgstr "Törlőtorony forgási szöge" + +msgid "Wipe tower rotation angle with respect to x-axis." +msgstr "Törlőtorony forgási szöge az x-tengelyhez képest." + +msgid "Wipe into this object's infill" +msgstr "Töröljön bele az objektum kitöltésébe" + +msgid "" +"Purging after toolchange will be done inside this object's infills. This " +"lowers the amount of waste but may result in longer print time due to " +"additional travel moves." +msgstr "" +"A szerszámcsere utáni tisztítás az objektum kitöltésein belül történik. Ez " +"csökkenti a hulladék mennyiségét, de a további mozgások miatt hosszabb " +"nyomtatási időt eredményezhet." + +msgid "Wipe into this object" +msgstr "Törölje le ezt az objektumot" + +msgid "" +"Object will be used to purge the nozzle after a toolchange to save material " +"that would otherwise end up in the wipe tower and decrease print time. " +"Colours of the objects will be mixed as a result." +msgstr "" +"Az objektumot a fúvóka szerszámcsere utáni tisztítására használják, hogy " +"megtakarítsák az anyagot, amely egyébként a törlőtoronyba kerülne, és " +"csökkentsék a nyomtatási időt. Az objektumok színei ennek eredményeképpen " +"keverednek." + +msgid "Extra Wipe for external perimeters" +msgstr "Extra törlés a külső határokhoz" + +msgid "" +"When the external perimeter loop extrusion ends, a wipe is done, going " +"slightly inside the print. The number in this settting increases the wipe by " +"moving the nozzle along the loop again before the final wipe." +msgstr "" +"Amikor a külső peremhurok extrudálása véget ér, egy törlés történik, kissé a " +"nyomtatás belsejébe haladva. A szám ebben a beállításban növeli a törlést " +"azáltal, hogy a fúvókát a hurok mentén újra mozgatja a végső törlés előtt." + +msgid "Maximal bridging distance" +msgstr "Maximális áthidalási távolság" + +msgid "Maximal distance between supports on sparse infill sections. " +msgstr "Maximális távolság a támaszok között a ritkás kitöltésű szakaszokon. " + +msgid "Outer" +msgstr "Külső" + +msgid "Outer XY size compensation" +msgstr "Külső XY méretkompenzáció" + +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'exterior' shell of the object.\n" +" !!! it's recommended you put the same value into the 'Inner XY size " +"compensation', unless you are sure you don't have horizontal holes. !!! " +msgstr "" +"Az objektum az XY-síkban a beállított értékkel növekszik/zsugorodik (negatív " +"= befelé, pozitív = kifelé). Ez hasznos lehet a méretek finomhangolásához.\n" +"Ez csak az objektum \"külső\" héjára vonatkozik.\n" +" !!! Ajánlott ugyanezt az értéket a 'Belső XY méretkompenzáció' értékébe is " +"betenni, kivéve, ha biztos vagy benne, hogy nincsenek vízszintes lyukak. !!! " + +msgid "Inner" +msgstr "Belső" + +msgid "Inner XY size compensation" +msgstr "Belső XY méretkompenzáció" + +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'inner' shell of the object (!!! horizontal " +"holes break the shell !!!)" +msgstr "" +"Az objektum az XY-síkban a beállított értékkel növekszik/zsugorodik (negatív " +"= befelé, pozitív = kifelé). Ez hasznos lehet a méretek finomhangolásához.\n" +"Ez csak az objektum \"belső\" héjára vonatkozik (!!! vízszintes lyukak " +"megtörik a héjat !!!)" + +msgid "XY compensation" +msgstr "XY kompenzáció" + +msgid "XY holes compensation" +msgstr "X-Y lyukak kompenzálása" + +msgid "" +"The convex holes will be grown / shrunk in the XY plane by the configured " +"value (negative = inwards, positive = outwards, should be negative as the " +"holes are always a bit smaller irl). This might be useful for fine-tuning " +"hole sizes.\n" +"This setting behaves the same as 'Inner XY size compensation' but only for " +"convex shapes. It's added to 'Inner XY size compensation', it does not " +"replace it. " +msgstr "" +"A domború lyukak az XY síkban a beállított értékkel nőnek/zsugorodnak " +"(negatív = befelé, pozitív = kifelé, negatívnak kell lennie, mivel a lyukak " +"mindig egy kicsit kisebbek irl). Ez hasznos lehet a lyukméretek " +"finomhangolásához.\n" +"Ez a beállítás ugyanúgy viselkedik, mint a 'Belső XY méretkompenzáció', de " +"csak konvex alakzatok esetén. Hozzáadódik a 'Belső XY méretkompenzáció' " +"beállításhoz, nem helyettesíti azt. " + +msgid "Threshold" +msgstr "Küszöbérték" + +msgid "XY holes threshold" +msgstr "XY lyukak küszöbértéke" + +msgid "" +"Maximum area for the hole where the hole_size_compensation will apply fully. " +"After that, it will decrease down to 0 for four times this area. Set to 0 to " +"let the hole_size_compensation apply fully for all detected holes" +msgstr "" +"A lyuk maximális területe, ahol a hole_size_compensation teljes mértékben " +"érvényesül. Ezután ennek a területnek a négyszeresére, 0-ra csökken. A 0 " +"értékre állítva a hole_size_compensation minden észlelt lyukra teljes " +"mértékben érvényesül" + +msgid "Convert round holes to polyholes" +msgstr "Kerek lyukak átalakítása többlyukúvá" + +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" +"Keressen olyan majdnem kör alakú lyukakat, amelyek egynél több rétegen " +"átívelnek, és alakítsa át a geometriát polilyukakká. A fúvókaméret és a " +"(legnagyobb) átmérő segítségével számítsa ki a polilyukakat.\n" +"Lásd http://hydraraptor.blogspot.com/2011/02/polyholes.html" + +msgid "Roundness margin" +msgstr "Kerekítési különbözet" + +msgid "Polyhole detection margin" +msgstr "Polyhole észlelési határérték" + +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" +"Egy pont maximális eltérése a kör becsült sugarától.\n" +"Mivel a hengereket gyakran különböző méretű háromszögekként exportálják, " +"előfordulhat, hogy a pontok nem a kör kerületén vannak. Ez a beállítás némi " +"mozgásteret biztosít a felismerés kiszélesítéséhez.\n" +"Többnyire mm-ben vagy a sugár %-ában." + +msgid "Twisting" +msgstr "Csavarodás" + +msgid "Polyhole twist" +msgstr "Polyhole twist" + +msgid "Rotate the polyhole every layer." +msgstr "Forgassa el a polihole-t minden rétegben." + +msgid "Z offset" +msgstr "Z eltolás" + +msgid "" +"This value will be added (or subtracted) from all the Z coordinates in the " +"output G-code. It is used to compensate for bad Z endstop position: for " +"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " +"print bed, set this to -0.3 (or fix your endstop)." +msgstr "" +"Ez az érték hozzáadódik (vagy kivonásra kerül) az összes Z koordinátához a " +"kimeneti G-kódban. A rossz Z végállás pozíciójának kompenzálására szolgál: " +"például ha a végállás nullája valójában 0,3 mm-re hagyja a fúvókát a " +"nyomtatási ágytól, állítsa ezt -0,3-ra (vagy javítsa a végállást)." + +msgid "Z full step" +msgstr "Z teljes lépés" + +msgid "" +"Set this to the height moved when your Z motor (or equivalent) turns one " +"step.If your motor needs 200 steps to move your head/platter by 1mm, this " +"field should be 1/200 = 0.005.\n" +"Note that the gcode will write the z values with 6 digits after the dot if " +"z_step is set (it's 3 digits if it's disabled).\n" +"Set zero to disable." +msgstr "" +"Állítsa be ezt a magasságot, amelyet a Z-motor (vagy azzal egyenértékű " +"motor) egy lépéssel történő fordulatakor mozgat.Ha a motornak 200 lépésre " +"van szüksége a fej/lemez 1 mm-es mozgatásához, akkor ennek a mezőnek 1/200 = " +"0,005-nek kell lennie.\n" +"Vegye figyelembe, hogy a gcode a z értékeket a pont után 6 számjeggyel írja " +"ki, ha a z_step be van állítva (3 számjegyű, ha ki van kapcsolva).\n" +"A letiltáshoz állítson be nullát." + +msgid "Milling cutter" +msgstr "Marógép" + +msgid "" +"The milling cutter to use (unless more specific extruder settings are " +"specified). " +msgstr "" +"A használni kívánt marógép (kivéve, ha specifikusabb extruder-beállítások " +"vannak megadva). " + +msgid "Milling diameter" +msgstr "Marási átmérő" + +msgid "This is the diameter of your cutting tool." +msgstr "Ez a vágószerszám átmérője." + +msgid "Tool offset" +msgstr "Szerszám eltolás" + +msgid "Tool z offset" +msgstr "Szerszám z eltolás" + +msgid "Tool z lift" +msgstr "Szerszám Z emelés" + +msgid "Amount of lift for travel." +msgstr "Az utazáshoz szükséges felhajtóerő." + +msgid "G-Code to switch to this toolhead" +msgstr "G-kód az eszközfej váltáshoz" + +msgid "" +"Put here the gcode to change the toolhead (called after the g-code " +"T{next_extruder}). You have access to {next_extruder} and " +"{previous_extruder}. next_extruder is the 'extruder number' of the new " +"milling tool, it's equal to the index (begining at 0) of the milling tool " +"plus the number of extruders. previous_extruder is the 'extruder number' of " +"the previous tool, it may be a normal extruder, if it's below the number of " +"extruders. The number of extruder is available at {extruder} and the number " +"of milling tool is available at {milling_cutter}." +msgstr "" +"Tegye ide a szerszámfej cseréjéhez szükséges g-kódot (a T{next_extruder} g-" +"kód után hívjuk). Hozzáférésed van a {next_extruder} és {previous_extruder} " +"értékekhez. next_extruder az új marószerszám 'extruder száma', ez egyenlő a " +"marószerszám indexével (0-val kezdődik) plusz az extruderek számával. " +"previous_extruder az előző szerszám 'extruder száma', ez lehet egy normál " +"extruder, ha az extruderek száma alatt van. Az extruder száma a {extruder}, " +"a marószerszám száma pedig a {milling_cutter} alatt érhető el." + +msgid "G-Code to switch from this toolhead" +msgstr "G-kód az eszközfej váltásához" + +msgid "" +"Enter here the gcode to end the toolhead action, like stopping the spindle. " +"You have access to {next_extruder} and {previous_extruder}. " +"previous_extruder is the 'extruder number' of the current milling tool, it's " +"equal to the index (begining at 0) of the milling tool plus the number of " +"extruders. next_extruder is the 'extruder number' of the next tool, it may " +"be a normal extruder, if it's below the number of extruders. The number of " +"extruder is available at {extruder}and the number of milling tool is " +"available at {milling_cutter}." +msgstr "" +"Adja meg itt a gkódot a szerszámfej műveletének befejezéséhez, például az " +"orsó leállításához. Hozzáférése van a {next_extruder} és {previous_extruder} " +"értékekhez. previous_extruder az aktuális marószerszám \"extruder száma\", " +"ez egyenlő a marószerszám indexével (0-val kezdődik) plusz az extruderek " +"számával. next_extruder a következő szerszám \"extruder száma\", ez egy " +"normál extruder lehet, ha az extruderek száma alatt van. Az extruder száma a " +"{extruder} alatt, a marószerszám száma pedig a {milling_cutter} alatt érhető " +"el." + +msgid "Milling post-processing" +msgstr "Marás utófeldolgozása" + +msgid "" +"If activated, at the end of each layer, the printer will switch to a milling " +"head and mill the external perimeters.\n" +"You should set the 'Milling extra XY size' to a value high enough to have " +"enough plastic to mill. Also, be sure that your piece is firmly glued to the " +"bed." +msgstr "" +"Ha aktiválva van, a nyomtató minden egyes réteg végén átvált a marófejre, és " +"a külső peremvonalakat marja.\n" +"A 'Milling extra XY size' értéket elég magasra kell állítani ahhoz, hogy " +"elegendő műanyag legyen a maráshoz. Győződjön meg arról is, hogy a darabja " +"szilárdan az ágyhoz van ragasztva." + +msgid "Milling extra XY size" +msgstr "Extra XY méretű marás" + +msgid "" +"This increases the size of the object by a certain amount to have enough " +"plastic to mill. You can set a number of mm or a percentage of the " +"calculated optimal extra width (from flow calculation)." +msgstr "" +"Ezáltal a tárgy mérete egy bizonyos mennyiséggel megnő, hogy elegendő " +"műanyag maradjon a maráshoz. Beállíthat egy mm-es számot vagy a számított " +"optimális extra szélesség százalékát (az áramlási számításból)." + +msgid "Milling only after" +msgstr "Marás csak azután" + +msgid "" +"This setting restricts the post-process milling to a certain height, to " +"avoid milling the bed. It can be a mm or a % of the first layer height (so " +"it can depend on the object)." +msgstr "" +"Ez a beállítás az utólagos marást egy bizonyos magasságra korlátozza, hogy " +"elkerülje az ágy marását. Ez lehet mm vagy az első réteg magasságának %-a " +"(tehát az objektumtól függhet)." + +msgid "Milling Speed" +msgstr "Marási sebesség" + +msgid "Speed for milling tool." +msgstr "A marószerszám sebessége." + +msgid "Display width" +msgstr "Kijelző szélessége" + +msgid "Width of the display" +msgstr "A kijelző szélessége" + +msgid "Display height" +msgstr "Kijelző magasság" + +msgid "Height of the display" +msgstr "A kijelző magassága" + +msgid "Number of pixels in" +msgstr "Képpontok száma" + +msgid "Number of pixels in X" +msgstr "X képpontok száma" + +msgid "Number of pixels in Y" +msgstr "Y képpontok száma" + +msgid "Display horizontal mirroring" +msgstr "Vízszintes tükrözés kijelzése" + +msgid "Mirror horizontally" +msgstr "Vízszintes tükör" + +msgid "Enable horizontal mirroring of output images" +msgstr "A kimeneti képek vízszintes tükrözésének engedélyezése" + +msgid "Display vertical mirroring" +msgstr "Függőleges tükrözés kijelzése" + +msgid "Mirror vertically" +msgstr "Függőleges tükör" + +msgid "Enable vertical mirroring of output images" +msgstr "A kimeneti képek függőleges tükrözésének engedélyezése" + +msgid "Display orientation" +msgstr "Kijelző tájolása" + +msgid "" +"Set the actual LCD display orientation inside the SLA printer. Portrait mode " +"will flip the meaning of display width and height parameters and the output " +"images will be rotated by 90 degrees." +msgstr "" +"Állítsa be az aktuális LCD-kijelző tájolását az SLA nyomtatóban. A portré " +"mód megfordítja a kijelző szélességi és magassági paramétereinek jelentését, " +"és a kimeneti képek 90 fokkal el lesznek forgatva." + +msgid "Landscape" +msgstr "Tájkép" + +msgid "Portrait" +msgstr "Portré" + +msgid "Fast" +msgstr "Gyors" + +msgid "Fast tilt" +msgstr "Gyors dőlés" + +msgid "Time of the fast tilt" +msgstr "Gyors dőlés ideje" + +msgid "Slow" +msgstr "Lassú" + +msgid "Slow tilt" +msgstr "Lassú dőlés" + +msgid "Time of the slow tilt" +msgstr "Lassú dőlés ideje" + +msgid "Area fill" +msgstr "Területkitöltés" + +msgid "" +"The percentage of the bed area. \n" +"If the print area exceeds the specified value, \n" +"then a slow tilt will be used, otherwise - a fast tilt" +msgstr "" +"Az ágyterület százalékos aránya. \n" +"Ha a nyomtatási terület meghaladja a megadott értéket, \n" +"akkor lassú billenés, ellenkező esetben gyors billenés lesz használatban" + +msgid "Printer scaling correction" +msgstr "Nyomtató méretezés korrekció" + +msgid "Printer absolute correction" +msgstr "Nyomtató abszolút korrekció" + +msgid "" +"Will inflate or deflate the sliced 2D polygons according to the sign of the " +"correction." +msgstr "" +"A szeletelt 2D poligonokat a korrekció előjelének megfelelően felfújja vagy " +"leereszti." + +msgid "minimum width" +msgstr "minimális szélesség" + +msgid "" +"Minimum width of features to maintain when doing the first layer " +"compensation." +msgstr "" +"A jellemzők minimális szélessége, amelyet az első rétegkompenzáció során meg " +"kell tartani." + +msgid "Printer gamma correction" +msgstr "Nyomtató gamma korrekció" + +msgid "" +"This will apply a gamma correction to the rasterized 2D polygons. A gamma " +"value of zero means thresholding with the threshold in the middle. This " +"behaviour eliminates antialiasing without losing holes in polygons." +msgstr "" +"Ez gammakorrekciót alkalmaz a raszterizált 2D poligonokra. A nulla " +"gammaérték a középső küszöbértékkel történő küszöbértékelést jelenti. Ez a " +"viselkedés kiküszöböli az antialiasinget anélkül, hogy a poligonok lyukai " +"elvesznének." + +msgid "SLA material type" +msgstr "SLA anyagtípus" + +msgid "Initial layer height" +msgstr "Kezdeti rétegmagasság" + +msgid "Bottle volume" +msgstr "Palack térfogata" + +msgid "ml" +msgstr "ml" + +msgid "Bottle weight" +msgstr "Palack súlya" + +msgid "kg" +msgstr "kg" + +msgid "g/ml" +msgstr "g/ml" + +msgid "money/bottle" +msgstr "pénz/palack" + +msgid "Faded layers" +msgstr "Fakó rétegek" + +msgid "" +"Number of the layers needed for the exposure time fade from initial exposure " +"time to the exposure time" +msgstr "" +"A kezdeti expozíciós időtől az expozíciós időig terjedő expozíciós időhöz " +"szükséges rétegek száma" + +msgid "Minimum exposure time" +msgstr "Min. expozíciós idő" + +msgid "Maximum exposure time" +msgstr "Max. expozíciós idő" + +msgid "Exposure time" +msgstr "Expozíciós idő" + +msgid "Minimum initial exposure time" +msgstr "Min. kezdeti expozíciós idő" + +msgid "Maximum initial exposure time" +msgstr "Max. kezdeti expozíciós idő" + +msgid "Initial exposure time" +msgstr "Kezdő expozíciós idő" + +msgid "Correction for expansion" +msgstr "Korrekció a bővítéshez" + +msgid "SLA print material notes" +msgstr "SLA nyomtatott anyag jegyzetek" + +msgid "You can put your notes regarding the SLA print material here." +msgstr "SLA nyomtatott anyagával kapcsolatos jegyzeteit itt teheti fel." + +msgid "Default SLA material profile" +msgstr "Alapértelmezett SLA anyagprofil" + +msgid "Generate supports" +msgstr "Támasztékok generálása" + +msgid "Generate supports for the models" +msgstr "Támasztékok generálása a modellekhez" + +msgid "Pinhead front diameter" +msgstr "Tűfej elülső átmérője" + +msgid "Diameter of the pointing side of the head" +msgstr "A fej mutató oldalának átmérője" + +msgid "Head penetration" +msgstr "Fej behatolás" + +msgid "How much the pinhead has to penetrate the model surface" +msgstr "Mennyire kell a tűhegynek behatolnia a modell felületébe" + +msgid "Pinhead width" +msgstr "Tűfej szélessége" + +msgid "Width from the back sphere center to the front sphere center" +msgstr "Szélesség a hátsó gömb középpontjától az első gömb középpontjáig" + +msgid "Pillar diameter" +msgstr "Pillér átmérője" + +msgid "Diameter in mm of the support pillars" +msgstr "A tartóoszlopok átmérője mm-ben" + +msgid "Small pillar diameter percent" +msgstr "Kis oszlop átmérő százalék" + +msgid "" +"The percentage of smaller pillars compared to the normal pillar diameter " +"which are used in problematic areas where a normal pilla cannot fit." +msgstr "" +"A normál oszlopátmérőhöz képest kisebb oszlopok aránya, amelyeket olyan " +"problémás területeken használnak, ahol egy normál oszlop nem fér el." + +msgid "Max bridges on a pillar" +msgstr "Max hidak egy pilléren" + +msgid "" +"Maximum number of bridges that can be placed on a pillar. Bridges hold " +"support point pinheads and connect to pillars as small branches." +msgstr "" +"Az egy pillérre helyezhető hidak maximális száma. A hidak tartják a " +"támaszpont tűfejeket, és kis ágakként csatlakoznak a pillérekhez." + +msgid "Pillar connection mode" +msgstr "Pillér csatlakozási mód" + +msgid "" +"Controls the bridge type between two neighboring pillars. Can be zig-zag, " +"cross (double zig-zag) or dynamic which will automatically switch between " +"the first two depending on the distance of the two pillars." +msgstr "" +"Két szomszédos pillér közötti híd típusát szabályozza. Lehet cikk-cakk, " +"kereszt (dupla cikk-cakk) vagy dinamikus, amely automatikusan vált az első " +"kettő között a két pillér távolságától függően." + +msgid "Zig-Zag" +msgstr "Cikcakk" + +msgid "Cross" +msgstr "Kereszt" + +msgid "Dynamic" +msgstr "Dinamikus" + +msgid "Pillar widening factor" +msgstr "Pillérszélesítési tényező" + +msgid "" +"Merging bridges or pillars into other pillars can increase the radius. Zero " +"means no increase, one means full increase." +msgstr "" +"A hidak vagy pillérek más pillérekbe való beolvasztása növelheti a sugarat. " +"A nulla azt jelenti, hogy nincs növekedés, az egy pedig teljes növekedést " +"jelent." + +msgid "Support base diameter" +msgstr "Támasz alap átmérője" + +msgid "Diameter in mm of the pillar base" +msgstr "Az oszlop alapjának átmérője mm-ben" + +msgid "Support base height" +msgstr "Támasz alap magassága" + +msgid "The height of the pillar base cone" +msgstr "Az oszlop alapkúpjának magassága" + +msgid "Support base safety distance" +msgstr "Tartóalap biztonsági távolsága" + +msgid "" +"The minimum distance of the pillar base from the model in mm. Makes sense in " +"zero elevation mode where a gap according to this parameter is inserted " +"between the model and the pad." +msgstr "" +"Az oszlop alapjának minimális távolsága a modelltől mm-ben. A nulla " +"magasságú üzemmódban van értelme, ahol a modell és a pillér közé egy ennek a " +"paraméternek megfelelő rés kerül beillesztésre." + +msgid "Critical angle" +msgstr "Kritikus szög" + +msgid "The default angle for connecting support sticks and junctions." +msgstr "" +"Az alapértelmezett szög a támasztópálcák és csomópontok összekötéséhez." + +msgid "Max bridge length" +msgstr "Max híd hossza" + +msgid "The max length of a bridge" +msgstr "A híd maximális hossza" + +msgid "Max pillar linking distance" +msgstr "Max. pillérkapcsolási távolság" + +msgid "" +"The max distance of two pillars to get linked with each other. A zero value " +"will prohibit pillar cascading." +msgstr "" +"Két oszlop maximális távolsága, hogy összekapcsolódjon egymással. A nulla " +"érték tiltja az oszlopok kaszkádosítását." + +msgid "" +"How much the supports should lift up the supported object. If this value is " +"zero, the bottom of the model geometry will be considered as part of the pad." +"If \"Pad around object\" is enabled, this value is ignored." +msgstr "" +"Mennyivel emeljék fel a támasztékok a támogatott tárgyat. Ha ez az érték " +"nulla, akkor a modellgeometria alsó része a kitámasztás részének tekintendő." +"Ha a \"Pad around object\" (Támasztás az objektum körül) opció engedélyezve " +"van, ez az érték figyelmen kívül marad." + +msgid "This is a relative measure of support points density." +msgstr "Ez a támogatási pontok sűrűségének relatív mérőszáma." + +msgid "Minimal distance of the support points" +msgstr "A támaszpontok minimális távolsága" + +msgid "No support points will be placed closer than this threshold." +msgstr "Ennél a küszöbértéknél közelebb nem helyeznek alátámasztási pontokat." + +msgid "Use pad" +msgstr "Használjon padot" + +msgid "Add a pad underneath the supported model" +msgstr "Adjon hozzá egy padot a támogatott modell alá" + +msgid "Pad wall thickness" +msgstr "Pad falvastagság" + +msgid "The thickness of the pad and its optional cavity walls." +msgstr "A betét és az opcionális üregfalak vastagsága." + +msgid "Pad wall height" +msgstr "Pad fal magassága" + +msgid "" +"Defines the pad cavity depth. Set zero to disable the cavity. Be careful " +"when enabling this feature, as some resins may produce an extreme suction " +"effect inside the cavity, which makes peeling the print off the vat foil " +"difficult." +msgstr "" +"Meghatározza a betét üregének mélységét. Az üreg kikapcsolásához állítsa be " +"a nullát. Legyen óvatos, amikor ezt a funkciót engedélyezi, mivel egyes " +"gyanták extrém szívóhatást fejthetnek ki az üregben, ami megnehezíti a " +"nyomtatás lehúzását a kádfóliáról." + +msgid "Pad brim size" +msgstr "Pad perem mérete" + +msgid "How far should the pad extend around the contained geometry" +msgstr "" +"Milyen messzire kell kiterjednie a padnak a tartalmazott geometria körül" + +msgid "Max merge distance" +msgstr "Max. egyesítési távolság" + +msgid "" +"Some objects can get along with a few smaller pads instead of a single big " +"one. This parameter defines how far the center of two smaller pads should " +"be. If theyare closer, they will get merged into one pad." +msgstr "" +"Egyes tárgyak egyetlen nagy pad helyett néhány kisebb paddal is " +"elboldogulnak. Ez a paraméter határozza meg, hogy a két kisebb pad " +"középpontja milyen messze legyen egymástól. Ha közelebb vannak egymáshoz, " +"akkor egy paddá olvadnak össze." + +msgid "Pad wall slope" +msgstr "Pad fal lejtése" + +msgid "" +"The slope of the pad wall relative to the bed plane. 90 degrees means " +"straight walls." +msgstr "" +"A betétfal lejtése az ágy síkjához képest. A 90 fok egyenes falat jelent." + +msgid "Create pad around object and ignore the support elevation" +msgstr "" +"Hozzon létre padot az objektum körül és hagyja figyelmen kívül a támasz " +"magasságát" + +msgid "Pad around object everywhere" +msgstr "Pad körül tárgy mindenhol" + +msgid "Force pad around object everywhere" +msgstr "Erőpad az objektum körül mindenhol" + +msgid "Pad object gap" +msgstr "Pad tárgy hézag" + +msgid "" +"The gap between the object bottom and the generated pad in zero elevation " +"mode." +msgstr "Az objektum alja és a generált pad közötti rés nulla magassági módban." + +msgid "Pad object connector stride" +msgstr "Pad objektum csatlakozó lépés" + +msgid "" +"Distance between two connector sticks which connect the object and the " +"generated pad." +msgstr "" +"Az objektumot és a generált padot összekötő két csatlakozó pálca közötti " +"távolság." + +msgid "Pad object connector width" +msgstr "Pad objektum csatlakozó szélessége" + +msgid "" +"Width of the connector sticks which connect the object and the generated pad." +msgstr "" +"Az objektumot és a generált padot összekötő csatlakozó pálcikák szélessége." + +msgid "Pad object connector penetration" +msgstr "Pad objektum csatlakozó behatolása" + +msgid "How much should the tiny connectors penetrate into the model body." +msgstr "Az apró csatlakozóknak mennyire kell behatolniuk a modell testébe." + +msgid "Enable hollowing" +msgstr "Üregesítés engedélyezése" + +msgid "Hollow out a model to have an empty interior" +msgstr "Üregesítsük ki a modellt, hogy üres belső teret kapjunk" + +msgid "Wall thickness" +msgstr "Falvastagság" + +msgid "Minimum wall thickness of a hollowed model." +msgstr "Az üreges modell minimális falvastagsága." + +msgid "Accuracy" +msgstr "Pontosság" + +msgid "" +"Performance vs accuracy of calculation. Lower values may produce unwanted " +"artifacts." +msgstr "" +"Teljesítmény vs. számítási pontosság. Az alacsonyabb értékek nemkívánatos " +"leleteket eredményezhetnek." + +msgid "" +"Hollowing is done in two steps: first, an imaginary interior is calculated " +"deeper (offset plus the closing distance) in the object and then it's " +"inflated back to the specified offset. A greater closing distance makes the " +"interior more rounded. At zero, the interior will resemble the exterior the " +"most." +msgstr "" +"Az üregesítés két lépésben történik: először egy képzeletbeli belső teret " +"számolunk ki az objektum mélyebbre (eltolás plusz a zárótávolság), majd " +"visszatöltjük a megadott eltolásig. A nagyobb zárótávolság lekerekíti a " +"belső teret. Nulla értéknél a belső tér leginkább a külsőhöz fog hasonlítani." + +msgid "Output Format" +msgstr "Kimeneti formátum" + +msgid "Select the output format for this printer." +msgstr "Válassza ki a nyomtató kimeneti formátumát." + +msgid "Masked CWS" +msgstr "Maszkolt CWS" + +msgid "Prusa SL1" +msgstr "Prusa SL1" + +msgid "Export OBJ" +msgstr "OBJ exportálása" + +msgid "Export the model(s) as OBJ." +msgstr "Exportálja a modellt OBJ formátumban." + +msgid "Export SLA" +msgstr "SLA exportálása" + +msgid "Slice the model and export SLA printing layers as PNG." +msgstr "" +"Szeletelje a modellt és exportálja az SLA nyomtatási rétegeket PNG " +"formátumban." + +msgid "Export 3MF" +msgstr "3MF exportálása" + +msgid "Export the model(s) as 3MF." +msgstr "Exportálja a modellt 3MF formátumban." + +msgid "Export AMF" +msgstr "AMF exportálása" + +msgid "Export the model(s) as AMF." +msgstr "Exportálja a modellt AMF-ként." + +msgid "Export STL" +msgstr "STL exportálása" + +msgid "Export the model(s) as STL." +msgstr "Exportálja a modellt STL formátumban." + +msgid "Slice the model and export toolpaths as G-code." +msgstr "Szeletelje a modellt és exportálja a szerszámpályákat G-kódként." + +msgid "G-code viewer" +msgstr "G-kód nézegető" + +msgid "Visualize an already sliced and saved G-code" +msgstr "Egy felszeletelt és elmentett G-kód vizualizálása" + +msgid "Slice" +msgstr "Szeletelés" + +msgid "" +"Slice the model as FFF or SLA based on the printer_technology configuration " +"value." +msgstr "" +"A modell FFF vagy SLA szeletelése a printer_technology konfigurációs érték " +"alapján." + +msgid "Help" +msgstr "Súgó" + +msgid "Show this help." +msgstr "Mutasd a súgót." + +msgid "Help (FFF options)" +msgstr "Súgó (FFF opciók)" + +msgid "Show the full list of print/G-code configuration options." +msgstr "" +"A nyomtatási/G-kód konfigurációs lehetőségek teljes listájának megjelenítése." + +msgid "Help (SLA options)" +msgstr "Súgó (SLA opciók)" + +msgid "Show the full list of SLA print configuration options." +msgstr "" +"Az SLA nyomtatási konfigurációs lehetőségek teljes listájának megjelenítése." + +msgid "Output Model Info" +msgstr "Kimeneti modell infó" + +msgid "Write information about the model to the console." +msgstr "A modellre vonatkozó információk írása a konzolra." + +msgid "Save config file" +msgstr "Konfig fájl mentése" + +msgid "Save configuration to the specified file." +msgstr "Konfiguráció mentése megadott fájlba." + +msgid "Align XY" +msgstr "XY igazítása" + +msgid "Align the model to the given point." +msgstr "Igazítsa a modellt a megadott ponthoz." + +msgid "Cut model at the given Z." +msgstr "Vágja le a modellt az adott Z-nél." + +msgid "Center" +msgstr "Központ" + +msgid "Center the print around the given center." +msgstr "A nyomtatás központosítása a megadott középpont körül." + +msgid "Don't arrange" +msgstr "Ne rendezd" + +msgid "" +"Do not rearrange the given models before merging and keep their original XY " +"coordinates." +msgstr "" +"Az egyesítés előtt ne rendezze át az adott modelleket, és tartsa meg az " +"eredeti XY-koordinátákat." + +msgid "Duplicate" +msgstr "Duplikált" + +msgid "Multiply copies by this factor." +msgstr "Szorozza meg ezzel a tényezővel." + +msgid "Duplicate by grid" +msgstr "Duplikálás rács szerint" + +msgid "Multiply copies by creating a grid." +msgstr "Sokszorozás egy rács létrehozásával." + +msgid "" +"Arrange the supplied models in a plate and merge them in a single model in " +"order to perform actions once." +msgstr "" +"Rendezze el a mellékelt modelleket egy lemezen, és egyesítse őket egyetlen " +"modellben, hogy egyszeri műveletet hajthasson végre." + +msgid "" +"Try to repair any non-manifold meshes (this option is implicitly added " +"whenever we need to slice the model to perform the requested action)." +msgstr "" +"Próbálja megjavítani a nem sokrétű hálót (ez az opció implicit módon " +"hozzáadódik, ha a modellt fel kell szeletelnünk a kért művelet " +"végrehajtásához)." + +msgid "Rotation angle around the Z axis in degrees." +msgstr "A Z tengely körüli elforgatási szög fokban." + +msgid "Rotate around X" +msgstr "Forgatás X körül" + +msgid "Rotation angle around the X axis in degrees." +msgstr "Az X tengely körüli elforgatási szög fokban." + +msgid "Rotate around Y" +msgstr "Forgatás Y körül" + +msgid "Rotation angle around the Y axis in degrees." +msgstr "Az Y tengely körüli elforgatási szög fokban." + +msgid "Scaling factor or percentage." +msgstr "Skálázási tényező vagy százalék." + +msgid "" +"Detect unconnected parts in the given model(s) and split them into separate " +"objects." +msgstr "" +"Az adott modell(ek)ben az összekapcsolatlan részek felismerése és különálló " +"objektumokra bontása." + +msgid "Scale to Fit" +msgstr "Méretre igazít" + +msgid "Scale to fit the given volume." +msgstr "A megadott térfogatra való méretezés." + +msgid "Ignore non-existent config files" +msgstr "Nem létező konfigurációs fájlok figyelmen kívül hagyása" + +msgid "Do not fail if a file supplied to --load does not exist." +msgstr "Nem hiba, ha a --load-nak megadott fájl nem létezik." + +msgid "" +"Forward-compatibility rule when loading configurations from config files and " +"project files (3MF, AMF)." +msgstr "" +"Előre kompatibilitási szabály konfigurációs fájlok és projektfájlok (3MF, " +"AMF) konfigurációinak betöltésekor." + +msgid "" +"This version of Slic3r may not understand configurations produced by newest " +"Slic3r versions. For example, newer Slic3r may extend the list of supported " +"firmware flavors. One may decide to bail out or to substitute an unknown " +"value with a default silently or verbosely." +msgstr "" +"A Slic3r ezen verziója nem feltétlenül érti a legújabb Slic3r verziók által " +"létrehozott konfigurációkat. Az újabb Slic3r például kibővítheti a " +"támogatott firmware-verziók listáját. Az ember dönthet úgy, hogy kihátrál, " +"vagy egy ismeretlen értéket csendben vagy verbálisan egy alapértelmezett " +"értékkel helyettesít." + +msgid "Load config file" +msgstr "Konfig fájl betöltése" + +msgid "" +"Load configuration from the specified file. It can be used more than once to " +"load options from multiple files." +msgstr "" +"Konfiguráció betöltése a megadott fájlból. Többször is használható több " +"fájlból történő beállítások betöltéséhez." + +msgid "Output File" +msgstr "Kimeneti fájl" + +msgid "" +"The file where the output will be written (if not specified, it will be " +"based on the input file)." +msgstr "" +"Az a fájl, ahová a kimenet íródik (ha nincs megadva, a kimenet a bemeneti " +"fájlon alapul)." + +msgid "Single instance mode" +msgstr "Egypéldányos üzemmód" + +msgid "" +"If enabled, the command line arguments are sent to an existing instance of " +"GUI Slic3r, or an existing Slic3r window is activated. Overrides the " +"\"single_instance\" configuration value from application preferences." +msgstr "" +"Ha engedélyezve van, a parancssori argumentumokat a Slic3r GUI egy meglévő " +"példányának küldi el, vagy egy meglévő Slic3r ablakot aktivál. Felülírja a " +"\"single_instance\" konfigurációs értéket az alkalmazás beállításaiból." + +msgid "Data directory" +msgstr "Adatkönyvtár" + +msgid "" +"Load and store settings at the given directory. This is useful for " +"maintaining different profiles or including configurations from a network " +"storage." +msgstr "" +"A beállítások betöltése és tárolása a megadott könyvtárban. Ez hasznos a " +"különböző profilok karbantartásához vagy a hálózati tárolóból származó " +"konfigurációk felvételéhez." + +msgid "Logging level" +msgstr "Naplózási szint" + +msgid "" +"Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" +"trace\n" +"For example. loglevel=2 logs fatal, error and warning level messages." +msgstr "" +"Naplózási érzékenység beállítása. 0:fatal, 1:error, 2:warning, 3:info, 4:" +"debug, 5:trace\n" +"Például: loglevel=2 a fatal, error és warning szintű üzeneteket naplózza." + +msgid "Render with a software renderer" +msgstr "Renderelés szoftveres renderelővel" + +msgid "" +"Render with a software renderer. The bundled MESA software renderer is " +"loaded instead of the default OpenGL driver." +msgstr "" +"Renderelés szoftveres renderelővel. A csomagban található MESA szoftveres " +"renderelő betöltődik az alapértelmezett OpenGL illesztőprogram helyett." + +msgid "Processing triangulated mesh" +msgstr "Háromszögháló feldolgozása" + +msgid "Generating perimeters" +msgstr "Kerületek generálása" + +msgid "Generating perimeters: layer %s / %s" +msgstr "Kerületek generálása: réteg %s / %s" + +msgid "Preparing infill" +msgstr "Kitöltés előkészítése" + +msgid "Infilling layer %s / %s" +msgstr "Kitöltési réteg %s / %s" + +msgid "Generating support material" +msgstr "Támasztékok létrehozása" + +msgid "Pad brim size is too small for the current configuration." +msgstr "A pad karimája túl kicsi az aktuális konfigurációhoz." + +msgid "" +"Cannot proceed without support points! Add support points or disable support " +"generation." +msgstr "" +"Alátámasztás nélkül nem lehet továbblépni! Adjon hozzá alátámasztást, vagy " +"tiltsa le az alátámasztás generálást." + +msgid "" +"Elevation is too low for object. Use the \"Pad around object\" feature to " +"print the object without elevation." +msgstr "" +"A magasság túl alacsony a tárgyhoz. Használja a \"Pad around object\" " +"funkciót a tárgy magasság nélküli nyomtatásához." + +msgid "" +"The endings of the support pillars will be deployed on the gap between the " +"object and the pad. 'Support base safety distance' has to be greater than " +"the 'Pad object gap' parameter to avoid this." +msgstr "" +"A tartóoszlopok végei a tárgy és a pad közötti résen helyezkednek el. Ennek " +"elkerülése érdekében a 'Support base safety distance' paraméternek " +"nagyobbnak kell lennie, mint a 'Pad object gap' paraméternek." + +msgid "Exposition time is out of printer profile bounds." +msgstr "Az expozíciós idő a nyomtató profiljának határain kívül esik." + +msgid "Initial exposition time is out of printer profile bounds." +msgstr "A kezdeti expozíciós idő a nyomtató profiljának határain kívül esik." + +msgid "Hollowing model" +msgstr "Üreges modell" + +msgid "Drilling holes into model." +msgstr "Lyukak fúrása a modellbe." + +msgid "Slicing model" +msgstr "Szeletelési modell" + +msgid "Generating support points" +msgstr "Támaszpontok létrehozása" + +msgid "Generating support tree" +msgstr "Támogatási fa generálása" + +msgid "Generating pad" +msgstr "Generáló pad" + +msgid "Slicing supports" +msgstr "Szeletelés támogatás" + +msgid "Merging slices and calculating statistics" +msgstr "Szeletek összevonása és statisztikák kiszámítása" + +msgid "Rasterizing layers" +msgstr "Raszterizálási rétegek" + +msgid "Too many overlapping holes." +msgstr "Túl sok az egymást átfedő lyuk." + +msgid "" +"Drilling holes into the mesh failed. This is usually caused by broken model. " +"Try to fix it first." +msgstr "" +"A lyukak fúrása a hálóba nem sikerült. Ezt általában a törött modell okozza. " +"Először próbálja meg kijavítani." + +msgid "" +"Slicing had to be stopped due to an internal error: Inconsistent slice index." +msgstr "" +"A szeletelést belső hiba miatt le kellett állítani: Inconsistent slice index." + +msgid "Visualizing supports" +msgstr "Támogatások vizualizálása" + +msgid "No pad can be generated for this model with the current configuration" +msgstr "" +"A jelenlegi konfigurációval nem lehet padot generálni ehhez a modellhez" + +msgid "" +"There are unprintable objects. Try to adjust support settings to make the " +"objects printable." +msgstr "" +"Vannak nyomtathatatlan tárgyak. Próbálja meg módosítani a támogatási " +"beállításokat, hogy az objektumok nyomtathatóvá váljanak." + +msgid "Error with zip archive" +msgstr "Hiba a zip archívummal" + +msgid "%1$d backward edge" +msgid_plural "%1$d backward edges" +msgstr[0] "%1$d hátsó él" +msgstr[1] "%1$d hátsó él" + +msgid "%1$d degenerate facet" +msgid_plural "%1$d degenerate facets" +msgstr[0] "%1$d degenerált felület" +msgstr[1] "%1$d degenerált felület" + +msgid "%1$d edge fixed" +msgid_plural "%1$d edges fixed" +msgstr[0] "%1$d él javtva" +msgstr[1] "%1$d él javtva" + +msgid "%1$d facet removed" +msgid_plural "%1$d facets removed" +msgstr[0] "%1$d felület eltávolítva" +msgstr[1] "%1$d felület eltávolítva" + +msgid "%1$d facet reversed" +msgid_plural "%1$d facets reversed" +msgstr[0] "%1$d felület megfordítva" +msgstr[1] "%1$d felületek megfordítva" + +msgid "%1$d object was loaded with custom seam." +msgid_plural "%1$d objects were loaded with custom seam." +msgstr[0] "%1$d objektum betöltésre került egyéni varrattal." +msgstr[1] "%1$d objektum betöltésre került egyéni varrattal." + +msgid "%1$d object was loaded with custom supports." +msgid_plural "%1$d objects were loaded with custom supports." +msgstr[0] "%1$d objektum betöltésre került egyéni támasztékokkal." +msgstr[1] "%1$d objektum betöltésre került egyéni támasztékokkal." + +msgid "%1$d object was loaded with multimaterial painting." +msgid_plural "%1$d objects were loaded with multimaterial painting." +msgstr[0] "%1$d objektum betöltésre került többanyagú festéssel." +msgstr[1] "%1$d objektum betöltésre került többanyagú festéssel." + +msgid "%1$d object was loaded with partial sinking." +msgid_plural "%1$d objects were loaded with partial sinking." +msgstr[0] "%1$d objektum betöltésre került részleges süllyedéssel." +msgstr[1] "%1$d objektum betöltésre került részleges süllyedéssel." + +msgid "%1$d object was loaded with variable layer height." +msgid_plural "%1$d objects were loaded with variable layer height." +msgstr[0] "%1$d objektum betöltésre került változó rétegmagassággal." +msgstr[1] "%1$d objektum betöltésre került változó rétegmagassággal." + +msgid "%1$d open edge" +msgid_plural "%1$d open edges" +msgstr[0] "%1$d nyitott él" +msgstr[1] "%1$d nyitott él" + +msgid "%1% (%2$d shell)" +msgid_plural "%1% (%2$d shells)" +msgstr[0] "%1% (%2$d héj)" +msgstr[1] "%1% (%2$d héjak)" + +msgid "" +"%1% marked with * are not compatible with some installed " +"printers." +msgstr "" +"A *-gal megjelölt %1% nem kompatibilisek az összes telepített " +"nyomtatóval." + +msgid "%s has a warning" +msgstr "%s figyelmeztet_" + +msgid "%s info" +msgstr "%s info" + +msgid "%s warning" +msgstr "%s figyelmeztetés" + +msgid "&Collapse Sidebar" +msgstr "Oldalsáv Összecsukása" + +msgid "&Delete Selected" +msgstr "Kijelöltek törlése" + +msgid "&Fullscreen" +msgstr "Teljes Képernyő" + +msgid "&G-code Preview" +msgstr "G-Kód Előnézet" + +msgid "&Select All" +msgstr "Összes kijelőlése" + +msgid "(Some lines not shown)" +msgstr "(Néhány sor nem látható)" + +msgid "0 (off)" +msgstr "0 (kikapcsolva)" + +msgid "1 (light)" +msgstr "1 (könnyű)" + +msgid "2 (default)" +msgstr "2 (alapértelmezett)" + +msgid "3 (heavy)" +msgstr "3 (nehéz)" + +msgid "A new filament was installed and it will be activated." +msgstr "Új filament lett telepítve, és aktiválásra fog kerülni." + +msgid "A new Printer was installed and it will be activated." +msgstr "Új nyomtató lett telepítve, és aktiválásra került." + +msgid "A new SLA material was installed and it will be activated." +msgstr "Új SLA anyag lett telepítve, és aktiválásra került." + +msgid "A new vendor was installed and one of its printers will be activated" +msgid_plural "" +"New vendors were installed and one of theirs printers will be activated" +msgstr[0] "" +"Új gyártó került telepítésre, és annak egyik nyomtatója aktiválásra került" +msgstr[1] "" +"Új gyártók kerültek telepítésre, és azok egyik nyomtatója aktiválásra került" + +msgid "" +"A slower printing profile might be necessary when using materials with " +"higher viscosity or with some hollowed parts. It slows down the tilt " +"movement and adds a delay before exposure." +msgstr "" +"Nagyobb viszkozitású anyagok vagy üreges alkatrészek esetén lassabb " +"nyomtatási profilra lehet szükség. Lelassítja a billenőmozgást, és " +"késleltetést ad hozzá az expozíció előtt." + +msgid "Abort" +msgstr "Megszakítás" + +msgid "Acceleration control (advanced)" +msgstr "Gyorsulásszabályozás (Haladó)" + +msgid "Access violation" +msgstr "Hozzáférés megsértése" + +msgid "Add" +msgstr "Hozzáadás" + +msgid "Add Shape from Gallery" +msgstr "Alakzat Hozzáadása a Galériából" + +msgid "Add Shapes from Gallery" +msgstr "Alakzatok Hozzáadása a Galériából" + +msgid "All installed printers are compatible with the selected %1%." +msgstr "Minden telepített nyomtató kompatibilis a kiválasztott %1% -val." + +msgid "All non-solid parts (modifiers) were deleted" +msgstr "Minden nem szilárd alkatrész (módosító) törlésre került" + +msgid "All settings changes will not be saved" +msgstr "A beállítások módosításai nem kerülnek mentésre" + +msgid "All user presets will be deleted." +msgstr "Az összes felhasználói előbeállítás törlésre kerül." + +msgid "All walls" +msgstr "Összes fal" + +msgid "Allow next color repetition" +msgstr "Színismétlés engedélyezése" + +msgid "Allows painting only on facets selected by: \"%1%\"" +msgstr "Csak a \"%1%\" által kiválasztott felületekre enged festeni." + +msgid "Always ask for unsaved changes in presets when creating new project" +msgstr "" +"Mindig kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " +"projektet hoz létre" + +msgid "" +"Always ask for unsaved changes in presets when selecting new preset or " +"resetting a preset" +msgstr "" +"Mindig kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " +"előbeállítást választ vagy visszaállít egy előbeállítást" + +msgid "" +"An existing configuration was found in %3%\n" +"created by %1% %2%.\n" +"\n" +"Shall this configuration be imported?" +msgstr "" +"A %1% %2% által létrehozott %3%-ban egy meglévő konfigurációt " +"találtunk.\n" +"\n" +"Importáljuk ezt a meglévő konfigurációt?" + +msgid "" +"An object has custom support enforcers which will not be used because " +"supports are disabled." +msgstr "" +"Egy objektumnak vannak olyan egyéni támaszték kényszerítői, amelyek nem " +"lesznek használva, mivel a támasztékok le vannak tiltva." + +msgid "Apply" +msgstr "Alkalmaz" + +msgid "Apply color change automatically" +msgstr "Színváltás alkalmazása automatikusan" + +msgid "Apply to all the remaining small objects being loaded." +msgstr "Alkalmazza az összes hátralévő betöltendő kis objektumra." + +msgid "" +"Arrangement ignored the following objects which can't fit into a single " +"bed:\n" +"%s" +msgstr "" +"Az elrendezés figyelmen kívül hagyta a következő objektumokat, amelyek nem " +"férnek el a tárgyasztalon:\n" +"%s" + +msgid "Ask for unsaved changes in presets when creating new project" +msgstr "" +"Kérdezzen rá az előbeállítások nem mentett módosításaira, amikor új " +"projektet hoz létre" + +msgid "Ask for unsaved changes in presets when selecting new preset" +msgstr "" +"Kérdezzen rá az előbeállítások nem mentett módosításaira új előbeállítás " +"kiválasztásakor" + +msgid "Ask for unsaved changes in project" +msgstr "Kérdezzen rá a projektben nem mentett változtatásokra" + +msgid "" +"Ask to save unsaved changes in presets when closing the application or when " +"loading a new project" +msgstr "" +"Kérdezzen rá az előbeállítások nem mentett módosításainak mentésére az " +"alkalmazás bezárásakor vagy új projekt betöltésekor" + +msgid "Auto-repaired %1$d error" +msgid_plural "Auto-repaired %1$d errors" +msgstr[0] "Automatikusan megjavított %1$d hiba" +msgstr[1] "Automatikusan megjavított %1$d hibák" + +msgid "Autospeed (advanced)" +msgstr "Automatikus Sebesség (haladó)" + +msgid "Bail out on unknown configuration values" +msgstr "Kilépés ismeretlen konfigurációs értékek esetén" + +msgid "Bed" +msgstr "Tárgyasztal" + +msgid "Best surface quality" +msgstr "Legjobb felületminőség" + +msgid "Between objects G-code (for sequential printing)" +msgstr "G-kód Objektumok Között (egymás utáni nyomtatáshoz)" + +msgid "Bottom interface layers" +msgstr "Alsó interfész rétegek" + +msgid "Brim separation gap" +msgstr "Karima elválasztó hézag" + +msgid "Brim type" +msgstr "Karima típus" + +msgid "Brush" +msgstr "Ecset" + +msgid "Cancel upload" +msgstr "Feltöltés visszavonása" + +msgid "CANCELED" +msgstr "VISSZAVONVA" + +msgid "Case insensitive" +msgstr "Nagy- és kisbetű érzékeny" + +msgid "Change extruder color" +msgstr "Az Extruder színének változtatása" + +msgid "Changelog & Download" +msgstr "Változáslista & Letöltés" + +msgid "Changes for the critical options" +msgstr "Változtatások a kritikus opciókhoz" + +msgid "Check for Configuration Updates" +msgstr "Konfigurációs Frissítések Keresése" + +msgid "Clear Undo / Redo stack on new project" +msgstr "A Visszavonás/Mégis előzmények törlése új projektnél" + +msgid "" +"Clear Undo / Redo stack on new project or when an existing project is loaded." +msgstr "" +"A Visszavonás/Mégis előzmények törlése új projektnél vagy egy meglévő " +"projekt betöltésekor." + +msgid "Close holes" +msgstr "Lyukak bezárása" + +msgid "Closing radius" +msgstr "Zárási sugár" + +msgid "Color Change G-code" +msgstr "G-kód Színváltás" + +msgid "Compare Presets" +msgstr "Előbeállítások Összehasonlítása" + +msgid "Compare presets" +msgstr "Előbeállítások összehasonlítása" + +msgid "Compare this preset with some another" +msgstr "Ennek az előbeállításnak az összehasonlítása egy másikkal" + +msgid "Compared presets has different printer technology" +msgstr "" +"Az összehasonlított előbeállítások különböző nyomtatási technológiával " +"rendelkeznek" + +msgid "COMPLETED" +msgstr "KÉSZ" + +msgid "Configuration is edited in ConfigWizard" +msgstr "A konfiguráció szerkesztése a ConfigWizardban történik_" + +msgid "Configuration is editing from ConfigWizard" +msgstr "Konfiguráció szerkesztése a ConfigWizardból_" + +msgid "" +"Configuration Updates causes a lost of preset modification.\n" +"So, check unsaved changes and save them if necessary." +msgstr "" +"A Konfigurációs frissítések hatására az előre beállított módosítások " +"elvesznek. \n" +"Ezért ellenőrizze a nem mentett módosításokat, és szükség esetén mentse el " +"azokat." + +msgid "Continue" +msgstr "Folytatás" + +msgid "continue" +msgstr "folytatás" + +msgid "Continue and import newer configuration?" +msgstr "Folytatás és az újabb konfiguráció importálása?" + +msgid "Convert from meters" +msgstr "Konvertálás metrikus mértékegységről" + +msgid "Cooling" +msgstr "Hűtés" + +msgid "Correction for expansion in X axis" +msgstr "Terjeszkedés miatti korrekció az X tengelyen" + +msgid "Correction for expansion in Y axis" +msgstr "Terjeszkedés miatti korrekció az Y tengelyen" + +msgid "Correction for expansion in Z axis" +msgstr "Terjeszkedés miatti korrekció az Z tengelyen" + +msgid "" +"Cracks smaller than 2x gap closing radius are being filled during the " +"triangle mesh slicing. The gap closing operation may reduce the final print " +"resolution, therefore it is advisable to keep the value reasonably low." msgstr "" -"A szekvenciális nyomtatás aktív.\n" -"Ilyenkor nem lehet az objektumokhoz egyéni G-kódot adni.\n" -"Ez a kód nem kerül feldolgozásra a G-kód generálásakor." +"A szelet hézagzárási sugár 2x-esénél kisebb hézagok a háromszögháló " +"szeletelése során feltöltésre kerülnek. A hézagzárási művelet csökkentheti a " +"végső nyomtatási felbontást, ezért célszerű az értékét ésszerűen alacsonyan " +"tartani." -msgid "The size of the object can be specified in inches" -msgstr "Az objektum mérete Inch-ben is megadható" +msgid "Creating a new project" +msgstr "Új projekt létrehozása" -msgid "The size of the object is zero" -msgstr "Az objektum mérete zéró" +msgid "Creating a new project while some presets are modified." +msgstr "Új projekt létrehozása néhány előbeállítás módosítása közben." + +msgid "Creating a new project while the current project is modified." +msgstr "Új projekt létrehozása a jelenlegi projekt módosítása közben." + +msgid "Custom printer was installed and it will be activated." +msgstr "Egyedi nyomtató lett telepítve, és aktiválásra került." + +msgid "" +"Custom supports, seams and multimaterial painting were removed after " +"repairing the mesh." +msgstr "" +"Az egyedi támasztékok, varratok és a többanyagú festés eltávolításra került " +"háló javítása után." + +msgid "D&eselect All" +msgstr "Összes Kijelölés Megszüntetése" + +msgid "Dark mode (experimental)" +msgstr "Sötét mód (kísérleti)" + +msgid "Delete &All" +msgstr "Összes törlése" + +msgid "Delete All Objects" +msgstr "Az Összes Objektum Törlése" + +msgid "Density of the first raft or support layer." +msgstr "A támasz vagy tutaj első rétegének sűrűsége." + +msgid "Desktop Integration" +msgstr "Asztal integráció" + +msgid "Desktop integration failed." +msgstr "Az asztal integrációja nem sikerült." + +msgid "Desktop integration was successful." +msgstr "Az asztal integrációja sikeres volt." + +msgid "differs from the original file" +msgstr "különbözik az eredeti fájltól" + +msgid "Disable \"%1%\"" +msgstr "\"%1%\" letiltása" + +msgid "Display" +msgstr "Kijelző" + +msgid "Divide by zero" +msgstr "Nullával osztás" + +msgid "Do you want to continue changing the configuration?" +msgstr "Folytatja a konfiguráció módosítását?" + +msgid "Do you want to replace it" +msgstr "Szeretné helyettesíteni" + +msgid "Do you want to save the changes to \"%1%\"?" +msgstr "Menti a változásokat a következőhöz: \"%1%\"?" + +msgid "Don't import" +msgstr "Ne importálja" + +msgid "Don't save" +msgstr "Ne mentse" + +msgid "Edit" +msgstr "Szerkesztés" + +msgid "Eigen vectorization supported:" +msgstr "Támogatott saját vektorizálás:" + +msgid "Ejec&t SD Card / Flash Drive" +msgstr "SD Kártya / Flash meghajtó eltávolítása" + +msgid "Empty layer between %1% and %2%." +msgstr "Üres réteg %1% és %2% között." + +msgid "Enable dark mode" +msgstr "Sötét mód engedélyezése" + +msgid "" +"Enable reading unknown configuration values by silently substituting them " +"with defaults." +msgstr "" +"Ismeretlen konfigurációs értékek olvasásának engedélyezése. Az " +"alapértelmezett értékek helyettesítése csendben." + +msgid "" +"Enable reading unknown configuration values by verbosely substituting them " +"with defaults." +msgstr "" +"Ismeretlen konfigurációs értékek olvasásának engedélyezése. Az " +"alapértelmezett értékek helyettesítése megjegyzéssel." + +msgid "Enable supports for enforcers only" +msgstr "Támasztékok engedélyezése csak a kényszerítőkre" + +msgid "Enabled" +msgstr "Engedélyezve" + +msgid "Ensure on bed" +msgstr "Ágyra igazítás" + +msgid "ERROR" +msgstr "HIBA" + +msgid "Error during replace" +msgstr "Hiba helyettesítés közben" + +msgid "" +"ERROR: Please close all manipulators available from the left toolbar first" +msgstr "" +"HIBA: Először zárja be a bal oldali eszköztárból elérhető összes manipulátort" + +msgid "Estimated printing times" +msgstr "Becsült nyomtatási idő" + +msgid "Even-odd" +msgstr "Páros - Páratlan" + +msgid "" +"Expansion of the first raft or support layer to improve adhesion to print " +"bed." +msgstr "" +"Az első tutaj-, vagy támaszréteg túlnyúlása a tárgyasztalhoz való tapadás " +"javítása érdekében." + +msgid "Expansion of the raft in XY plane for better stability." +msgstr "A tutaj XY síkban történő kiterjesztése a jobb stabilitás érdekében." + +msgid "Export &Toolpaths as OBJ" +msgstr "Szerszámpálya Exportálása OBJ-ként" + +msgid "Export G-code to SD Card / Flash Drive" +msgstr "G-kód Exportálása SD Kártyára / Flash memóriára" + +msgid "Export Plate as &STL" +msgstr "Tárgyasztal Exportálása STL-ként" + +msgid "Export Plate as STL &Including Supports" +msgstr "Tárgyasztal Exportálása STL-ként támasztékokkal együtt" + +msgid "Export." +msgstr "Exportálás." + +msgid "Exporting configuration bundle" +msgstr "Konfigurációs csomag exportálása" + +msgid "Exporting." +msgstr "Exportálás." + +msgid "Extrusion width" +msgstr "Extrudálási szélesség" + +msgid "Failed to drill some holes into the model" +msgstr "Néhány lyukat nem sikerült a modellbe fúrni" + +msgid "Filament End G-code" +msgstr "Filament Vége G-kód" + +msgid "Filament properties" +msgstr "Filament tulajdonságok" + +msgid "Filament Start G-code" +msgstr "Filament Kezdete G-kód" + +msgid "File for the replace wasn't selected" +msgstr "A helyettesítéshez nem volt fájl kiválasztva" + +msgid "Find" +msgstr "Keresés" + +msgid "Find / replace patterns in G-code lines and substitute them." +msgstr "A G-kód sorokban található mintázatok keresése/behelyettesítése." + +msgid "First layer density" +msgstr "Első réteg sűrűsége" + +msgid "First layer expansion" +msgstr "Első réteg túlnyúlása" + +msgid "" +"First layer height is not valid.\n" +"\n" +"The first layer height will be reset to 0.01." +msgstr "" +"Az első réteg magassága nem érvényes.\n" +"\n" +"Az első réteg magassága 0,01-re áll vissza." + +msgid "First layer speed" +msgstr "Sebesség az első rétegnél" + +msgid "First object layer over raft interface" +msgstr "Első objektum réteg a tutaj felett" + +msgid "Fixing through NetFabb" +msgstr "Javítás a NetFabb segítségével" + +msgid "Flash Printer &Firmware" +msgstr "Nyomtató &Firmware Feltöltése" + +msgid "Floating reserved operand" +msgstr "Lebegő lefoglalt operandus_" + +msgid "Flow" +msgstr "Áramlás" + +msgid "" +"Following printer preset is duplicated:%1%The above preset for printer \"%2%" +"\" will be used just once." +msgid_plural "" +"Following printer presets are duplicated:%1%The above presets for printer " +"\"%2%\" will be used just once." +msgstr[0] "" +"A következő nyomtató előbeállítás duplikálódott:%1% A fenti előbeállítás a " +"\"%2%\" nyomtatóhoz csak egyszer kerül felhasználásra." +msgstr[1] "" +"A következő nyomtató előbeállítások duplikálódtak:%1% A fenti előbeállítások " +"a \"%2%\" nyomtatóhoz csak egyszer kerülnek felhasználásra." + +msgid "" +"Following printer profiles has no default filament: %1%Please select one " +"manually." +msgstr "" +"A következő nyomtatóprofilokhoz nem tartozik alapértelmezett filament: " +"%1%Kérem, válasszon egyet manuálisan." msgid "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer preset first before importing that SLA archive." +"Following printer profiles has no default material: %1%Please select one " +"manually." msgstr "" -"Az SLA archívum nem tartalmaz előbeállításokat. Kérjük, aktiváljon néhány " -"SLA nyomtató előbeállítást az SLA archívum importálása előtt." +"A következő nyomtatóprofilokhoz nem tartozik alapértelmezett anyag: " +"%1%Kérjük, válasszon egyet manuálisan." + +msgid "Folowing model repair failed" +msgid_plural "Folowing models repair failed" +msgstr[0] "A következő modell javítása nem sikerült" +msgstr[1] "A következő modellek javítása nem sikerült" msgid "" -"The slope of the pad wall relative to the bed plane. 90 degrees means " -"straight walls." +"For a multipart object, this value isn't accurate.\n" +"It doesn't take account of intersections and negative volumes." msgstr "" -"A párnafal meredeksége a tárgyasztal síkjához képest. A 90 fok egyenes falat " -"jelent." +"Egy többrészes objektum esetében ez az érték nem pontos.\n" +"Nem veszi figyelembe a metszeteket és a negatív térfogatokat." + +msgid "For new project all modifications will be reseted" +msgstr "Új projekt esetén az összes módosítás visszaállításra kerül" msgid "" -"The Spiral Vase option can only be used when printing single material " -"objects." +"For snug supports, the support regions will be merged using morphological " +"closing operation. Gaps smaller than the closing radius will be filled in." msgstr "" -"A Spirálváza opció csak egyféle anyagból álló objektum nyomtatásához " -"használható." +"Simulékony támaszok esetén a támaszrégiókat morfológiai zárási művelet " +"segítségével egyesítjük. A zárási sugárnál kisebb hézagok kitöltésre " +"kerülnek." -msgid "The supplied name is empty. It can't be saved." -msgstr "A megadott név üres. Nem menthető el." +msgid "Found reserved keywords in" +msgstr "Fenntartott kulcsszavakat találtam az" -msgid "The supplied name is not available." -msgstr "A megadott név nem elérhető." +msgid "Fullscreen" +msgstr "Teljes képernyő" -msgid "The supplied name is not valid;" -msgstr "A megadott név érvénytelen;" +msgid "Fuzzy Skin" +msgstr "Fuzzy bőr" -msgid "The supplied settings will cause an empty print." -msgstr "A megadott beállítások üres nyomtatáshoz vezetnek." +msgid "Fuzzy skin (experimental)" +msgstr "Fuzzy bőr (kísérleti)" -msgid "The thickness of the pad and its optional cavity walls." -msgstr "A párna és az opcionális üreg falainak vastagsága." +msgid "Fuzzy skin point distance" +msgstr "Fuzzy bőr pont távolság" -msgid "The uploads are still ongoing" -msgstr "A feltöltések még mindig folyamatban vannak" +msgid "Fuzzy skin thickness" +msgstr "Fuzzy bőr vastagság" -msgid "" -"The vertical distance between object and raft. Ignored for soluble interface." -msgstr "" -"Az objektum és a tutaj közötti függőleges távolság. Oldható határfelület " -"esetén figyelmen kívül hagyva." +msgid "Fuzzy skin type." +msgstr "Fuzzy bőr típusa." -msgid "" -"The Wipe option is not available when using the Firmware Retraction mode.\n" -"\n" -"Shall I disable it in order to enable Firmware Retraction?" -msgstr "" -"A Törlés opció nem érhető el a Firmware visszahúzás mód használatakor.\n" -"\n" -"Kikapcsolja a Törlést, hogy engedélyezze a Firmware visszahúzást?" +msgid "G-code resolution" +msgstr "G-kód felbontása" -msgid "" -"The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." -msgstr "" -"A törlőtorony jelenleg nem támogatja a volumetrikus E-t (use_volumetric_e=0)." +msgid "G-code substitutions" +msgstr "G-kód helyettesítések" -msgid "" -"The Wipe Tower currently supports the non-soluble supports only if they are " -"printed with the current extruder without triggering a tool change. (both " -"support_material_extruder and support_material_interface_extruder need to be " -"set to 0)." -msgstr "" -"A törlőtorony jelenleg csak akkor támogatja a nem oldható támasztékokat, ha " -"azok az aktuális extruderrel nyomtathatók szerszámváltás nélkül. (mind a " -"support_material_extruder, mind a support_material_interface_extruder " -"értékét 0-ra kell állítani)." +msgid "Generating skirt and brim" +msgstr "Szoknya és karima generálása" -msgid "" -"The Wipe Tower currently supports the non-soluble supports only\n" -"if they are printed with the current extruder without triggering a tool " -"change.\n" -"(both support_material_extruder and support_material_interface_extruder need " -"to be set to 0)." -msgstr "" -"A törlőtorony jelenleg csak a nem oldódó támaszokat támogatja\n" -"ha az aktuális extruderrel nyomtatják szerszámcsere kiváltása nélkül.\n" -"(mind a support_material_extruder, mind a " -"support_material_interface_extruder értéket 0-ra kell állítani)." +msgid "Gizmo FDM paint-on seam" +msgstr "Gizmo FDM varrat festés" -msgid "" -"The Wipe Tower is currently not supported for multimaterial sequential " -"prints." -msgstr "" -"A törlőtorony jelenleg nem támogatott a több anyagos szekvenciális nyomatok " -"esetében." +msgid "Gizmo FDM paint-on supports" +msgstr "Gizmo FDM támaszték festés" -msgid "" -"The Wipe Tower is currently only supported with the relative extruder " -"addressing (use_relative_e_distances=1)." -msgstr "" -"A törlőtorony jelenleg csak relatív extruder címzéssel " -"(use_relative_e_distances=1) támogatott." +msgid "Gizmo Multi Material painting" +msgstr "Gizmo Többanyagú festés" -msgid "" -"The Wipe Tower is only supported for multiple objects if they are printed " -"over an equal number of raft layers" -msgstr "" -"A törlőtorony csak akkor támogatott több objektum nyomtatása esetén, ha azok " -"azonos számú tutaj rétegre vannak nyomtatva" +msgid "Highlight overhang by angle" +msgstr "Túlnyúlás kijelölése szöggel" -msgid "" -"The Wipe Tower is only supported for multiple objects if they are printed " -"with the same support_material_contact_distance" -msgstr "" -"A törlőtorony csak akkor támogatott több objektum esetében, ha azok azonos " -"support_material_contact_distance paraméterbeálltással vannak nyomtatva" +msgid "Horizontal shells" +msgstr "Vízszintes héjak" -msgid "" -"The Wipe Tower is only supported for multiple objects if they are sliced " -"equally." +msgid "If enabled, a repetition of the next random color will be allowed." msgstr "" -"A törlőtorony csak akkor támogatott több objektum esetén, ha azok egyformán " -"vannak felszeletelve." +"Ha engedélyezve van, a következő véletlenszerű szín megegyezhet az " +"aktuálissal." msgid "" -"The Wipe Tower is only supported for multiple objects if they have equal " -"layer heights" +"If enabled, application will use the standard Windows system menu,\n" +"but on some combination of display scales it can looks ugly. If disabled, " +"old UI will be used." msgstr "" -"A törlőtorony csak akkor támogatott több objektum nyomtatásához, ha azok " -"azonos rétegmagassággal rendelkeznek" +"Ha engedélyezve van, az alkalmazás a Windows szabványos rendszermenüjét " +"fogja használni, \n" +"de a kijelző egyes méretarányainak kombinációján ez csúnyán nézhet ki. \n" +"Ha kikapcsolva, a régi felhasználói felületet használja." -msgid "" -"The wipe tower is only supported if all extruders have the same nozzle " -"diameter and use filaments of the same diameter." +msgid "If enabled, PrusaSlicer will be open at the position it was closed" msgstr "" -"A törlőtorony csak akkor támogatott, ha minden extruder azonos " -"fúvókaátmérővel rendelkezik és azonos átmérőjű filamentet használ." +"Ha engedélyezve van, a PrusaSlicer azon a helyen fog megnyílni, ahol bezárták" -msgid "" -"The Wipe tower is only supported if all objects have the same variable layer " -"height" +msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser." msgstr "" -"A törlőtorony csak akkor támogatott, ha minden objektumnak ugyanaz a változó " -"rétegmagassága" - -msgid "There are active warnings concerning sliced models:" -msgstr "Aktív figyelmeztetések vonatkoznak a szeletelt modellekre:" +"Ha engedélyezve van, a PrusaSlicer nem nyitja meg a hiperhivatkozásokat a " +"böngészőjében." -msgid "" -"There are unprintable objects. Try to adjust support settings to make the " -"objects printable." +msgid "If enabled, random sequence of the selected extruders will be used." msgstr "" -"Vannak nem nyomtatható objektumok. Próbálja meg módosítani a támasztó " -"beállításokat, hogy az objektumok nyomtathatóvá váljanak." +"Ha engedélyezve van, a kiválasztott extruderek véletlenszerű sorrendjét " +"fogja használni." msgid "" -"There is a color change for extruder that has not been used before.\n" -"Check your settings to avoid redundant color changes." +"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " +"will be used." msgstr "" -"Az extrudernek olyan színre kellene váltania, amelyet korábban nem " -"használtak.\n" -"Ellenőrizze a beállításokat a felesleges színváltások elkerülése érdekében." +"Ha engedélyezve van, a Beállítások fülek menüelemként jelennek meg. Ha le " +"van tiltva, a régi felhasználói felület kerül megjelenítésre." msgid "" -"There is a color change for extruder that won't be used till the end of " -"print job.\n" -"This code won't be processed during G-code generation." +"If enabled, the axes names and axes values will be colorized according to " +"the axes colors. If disabled, old UI will be used." msgstr "" -"Színváltás tartozik egy olyan extruderhez, amelyet a nyomtatási feladat " -"végéig nem használnak.\n" -"Ez a kód nem kerül feldolgozásra a G-kód generálásakor." +"Ha engedélyezve van, a tengelyek nevei és értékei a tengelyek színének " +"megfelelően lesznek színezve.\n" +"Ha le van tiltva, akkor a régi felhasználói felület marad aktív." msgid "" -"There is an extruder change set to the same extruder.\n" -"This code won't be processed during G-code generation." -msgstr "" -"Az aktuáli extruderrel megegyező extruderre való váltás van beállítva.\n" -"Ez a kód nem kerül feldolgozásra a G-kód generálásakor." - -msgid "There is an object with no extrusions in the first layer." +"If enabled, UI will use Dark mode colors. If disabled, old UI will be used." msgstr "" -"Van egy olyan objektum, amihez nem tartozik extrudálás az első rétegen." +"Ha engedélyezve van, a felhasználói felület a sötét mód színeit használja. " +"Ha le van tiltva, a régi felhasználói felület marad aktív." -msgid "This %s version: %s" -msgstr "Ez a %s verzió: %s" +msgid "If enabled, useful hints are displayed at startup." +msgstr "Ha engedélyezve van, hasznos tippek jelennek meg indításkor." msgid "" -"This action is not revertible.\n" -"Do you want to proceed?" +"If enabled, volumes will be always ordered inside the object. Correct order " +"is Model Part, Negative Volume, Modifier, Support Blocker and Support " +"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " +"Modifiers. But one of the model parts have to be on the first place." msgstr "" -"Ez a művelet nem visszavonható.\n" -"Akarja folytatni?" +"Ha engedélyezve van, a térfogatok mindig az objektumon belül lesznek " +"rendezve. A helyes sorrend: Modellalkatrész, Negatív térfogat, Módosító, " +"Támaszték blokkoló és Támaszték kényszerítő. Ha ki van kapcsolva, akkor a " +"Modellalkatrész, a Negatív térfogat és a Módosító átrendezhető. De az első " +"helyen az egyik Modellalkatrésznek kell lennie." -msgid "This action will cause deletion of all ticks on vertical slider." -msgstr "" -"Ez a művelet a függőleges csúszkán lévő összes jelölő törléséhez vezet." +msgid "Ignore HTTPS certificate revocation checks" +msgstr "Visszavont HTTPS tanúsítvány ellenőrzésének figyelmen kívül hagyása" msgid "" -"This experimental setting is used to limit the speed of change in extrusion " -"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " -"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" -"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." +"Ignore HTTPS certificate revocation checks in case of missing or offline " +"distribution points. One may want to enable this option for self signed " +"certificates if connection fails." msgstr "" -"Ez a kísérleti beállítás az extrudálási sebesség változásának sebességét " -"korlátozza. Az 1,8 mm³/s² érték biztosítja, hogy az 1,8 mm³/s extrudálási " -"sebesség (0,45 mm extrudálási szélesség, 0,2 mm extrudálási magasság, 20 mm/" -"s előtolási sebesség) és 5,4 mm³/s (60 mm/s előtolási sebesség) közötti " -"átmenet legalább 2 másodpercig tartson." +"Visszavont HTTPS-tanúsítvány ellenőrzésének figyelmen kívül hagyása hiányzó " +"vagy offline terjesztési pontok esetén. Ezt az opciót saját aláírású " +"tanúsítványok esetén érdemes engedélyezni, ha a kapcsolat nem sikerül." -msgid "" -"This experimental setting uses G10 and G11 commands to have the firmware " -"handle the retraction. This is only supported in recent Marlin." -msgstr "" -"Ez a kísérleti beállítás a G10 és G11 parancsokat használja, hogy a firmware " -"kezelje a visszahúzást. Ezt csak a legújabb Marlin támogatja." +msgid "Illegal instruction" +msgstr "Illegális utasítás" -msgid "" -"This factor changes the amount of flow proportionally. You may need to tweak " -"this setting to get nice surface finish and correct single wall widths. " -"Usual values are between 0.9 and 1.1. If you think you need to change this " -"more, check filament diameter and your firmware E steps." -msgstr "" -"Ez a tényező arányosan változtatja az áramlás mennyiségét. Lehet, hogy ezt a " -"beállítást finomítani kell a szép felület és a megfelelő egyfalú szélesség " -"eléréséhez. A szokásos értékek 0,9 és 1,1 között vannak. Ha úgy gondolja, " -"hogy ezt még jobban meg kell változtatnia, ellenőrizze a filament átmérőjét " -"és a firmware E lépéseit." +msgid "Import" +msgstr "Importálás_" -msgid "" -"This feature will raise Z gradually while printing a single-walled object in " -"order to remove any visible seam. This option requires a single perimeter, " -"no infill, no top solid layers and no support material. You can still set " -"any number of bottom solid layers as well as skirt/brim loops. It won't work " -"when printing more than one single object." -msgstr "" -"Ez a funkció fokozatosan megemeli a Z értékét az egyfalú objektum nyomtatása " -"közben, hogy eltávolítsa a látható varratokat. Ez az opció egyetlen " -"kerületet igényel, kitöltés, felső szilárd rétegek és támaszanyag nélkül. " -"Továbbra is beállíthat tetszőleges számú alsó tömör réteget, valamint " -"szoknya-/karima hurkokat. Egynél több objektum nyomtatásakor nem fog működni." +msgid "Import Config from &Project" +msgstr "Konfiguráció Importálása Projektből" -msgid "" -"This file cannot be loaded in a simple mode. Do you want to switch to an " -"advanced mode?" -msgstr "" -"Ez a fájl nem tölthető be egyszerű módban. Szeretne haladó módra váltani?" +msgid "Import SL1 / SL1S Archive" +msgstr "SL1 / SL1S Archív Importálása" -msgid "" -"This file contains several objects positioned at multiple heights.\n" -"Instead of considering them as multiple objects, should \n" -"the file be loaded as a single object having multiple parts?" -msgstr "" -"Ez a fájl több, különböző magasságban elhelyezett objektumot tartalmaz.\n" -"Több különálló objektum helyett, egyetlen, több részből álló objektumként " -"kell betölteni őket?" +msgid "Import STL (Imperial Units)" +msgstr "STL (Angolszász mértékegységek) Importálása" + +msgid "In the custom G-code were found reserved keywords:" +msgstr "Az egyéni G-kódban foglalt kulcsszavak találhatók:" + +msgid "Inner brim only" +msgstr "Csak belső karima" + +msgid "Internal error: %1%" +msgstr "Belső hiba: %1%" + +msgid "Keep" +msgstr "Megtartás" + +msgid "Keep the selected settings." +msgstr "A kiválasztott beállítások megtartása." msgid "" -"This firmware hex file does not match the printer model.\n" -"The hex file is intended for: %s\n" -"Printer reported: %s\n" +"Layer height is not valid.\n" "\n" -"Do you want to continue and flash this hex file anyway?\n" -"Please only continue if you are sure this is the right thing to do." +"The layer height will be reset to 0.01." msgstr "" -"Ez a firmware hexa fájl nem egyezik a nyomtató modelljével.\n" -"A hexa fájl ehhez a nyomtatóhoz való: %s\n" -"Az alábbi nyomató van csatlakoztatva: %s\n" +"A réteg magassága nem érvényes.\n" "\n" -"Mindenképpen folytatni akarja és feltölti a fájlt?\n" -"Kérjük, csak akkor folytassa, ha biztos benne, hogy ez a helyes lépés." +"A réteg magassága 0,01-re áll vissza." -msgid "" -"This flag enables the automatic cooling logic that adjusts print speed and " -"fan speed according to layer printing time." -msgstr "" -"Ez a jelölő engedélyezi az automatikus hűtési logikát, amely a nyomtatási " -"sebességet és a ventilátor sebességét a rétegnyomtatási időnek megfelelően " -"állítja be." +msgid "Layer height limits" +msgstr "Rétegmagasság korlátok" -msgid "This G-code will be used as a code for the color change" -msgstr "Ezt a G-kódot a színváltás kódjaként fogjuk használni" +msgid "Leave \"%1%\" enabled" +msgstr "Hagyja engedélyezve a \"%1%\"-ot" -msgid "This G-code will be used as a code for the pause print" -msgstr "Ezt a G-kódot a nyomtatás szüneteltetés kódjaként fogjuk használni" +msgid "Left Preset Value" +msgstr "Bal Előbeállítás Értéke" -msgid "This G-code will be used as a custom code" -msgstr "Ezt a G-kódot egyéni kódként fogjuk használni" +msgid "" +"Lift the object above the bed when it is partially below. Enabled by " +"default, use --no-ensure-on-bed to disable." +msgstr "" +"Emelje az objektumot a tárgyasztal fölé, amikor az részben alatta van. " +"Alapértelmezés szerint engedélyezve van, kikapcsolásához használja a --no-" +"ensure-on-bed opciót." -msgid "This is a default preset." -msgstr "Ez az alapértelmezett előbeállítás." +msgid "Lightning" +msgstr "Villám" -msgid "This is a relative measure of support points density." -msgstr "Ez a támasztási pontok sűrűségének relatív mérőszáma." +msgid "Limited" +msgstr "Korlátozott" -msgid "" -"This is a single extruder multimaterial printer, diameters of all extruders " -"will be set to the new value. Do you want to proceed?" -msgstr "" -"Ez egy egy-extruderes, többféle anyagot használó nyomtató, az összes " -"extruder átmérője az új értékre lesz beállítva. Szeretné folytatni?" +msgid "Load Modifier" +msgstr "Módosító Betöltése" -msgid "This is a system preset." -msgstr "Ez a rendszer előbeállítás." +msgid "Loading a configuration snapshot" +msgstr "Konfigurációs pillanatkép betöltése" -msgid "This is only used in the Slic3r interface as a visual help." -msgstr "Ezt csak a Slic3r felületén használjuk vizuális segítségként." +msgid "Loading a new project while the current project is modified." +msgstr "Új projekt betöltése az jelenlegi projekt módosítása közben." -msgid "" -"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" -msgstr "Ez az extruder fúvókájának átmérője (például: 0,5, 0,35 stb.)" +msgid "Loading of a configuration bundle" +msgstr "Konfigurációs csomag betöltése" -msgid "This is wipe tower layer" -msgstr "Ez egy törlőtorony réteg" +msgid "Loading of a configuration file" +msgstr "Konfigurációs fájl betöltése" -msgid "" -"This matrix describes volumes (in cubic milimetres) required to purge the " -"new filament on the wipe tower for any given pair of tools. " -msgstr "Ez a mátrix bármely adott szerszámpár esetében leírja az új filament tisztításához szükséges, a törlőtoronyba töltenő térfogatokat (köbmilliméterben). " +msgid "Lowest Z height" +msgstr "Legalacsonyabb Z magasság" msgid "" -"This may cause problems in g-code visualization and printing time estimation." +"Make sure the object is printable. This is usually caused by negligibly " +"small extrusions or by a faulty model. Try to repair the model or change its " +"orientation on the bed." msgstr "" -"Ez problémákat okozhat a g-kód megjelenítésében és a nyomtatási idő " -"becslésében." +"Győződjön meg róla, hogy az objektum nyomtatható. Ezt általában " +"elhanyagolhatóan kis extrudálások vagy hibás modell okozza. Próbálja meg " +"kijavítani a modellt, vagy változtassa meg az tárgyasztalon való tájolását." -msgid "" -"This operation is irreversible.\n" -"Do you want to proceed?" -msgstr "" -"Ez a művelet nem visszavonható.\n" -"Akarja folytatni?" +msgid "Match single line" +msgstr "Egysoros egyeztetés" -msgid "" -"This option sets the number of perimeters to generate for each layer. Note " -"that Slic3r may increase this number automatically when it detects sloping " -"surfaces which benefit from a higher number of perimeters if the Extra " -"Perimeters option is enabled." -msgstr "" -"Ez az opció beállítja az egyes rétegeknél létrehozandó kerületek számát. " -"Vegye figyelembe, hogy a Slic3r automatikusan megnövelheti ezt a számot, ha " -"olyan ferde felületet észlel, amely számára előnyös a nagyobb számú kerület, " -"amennyiben az Extra kerület opció engedélyezve van." +msgid "Material printing profile" +msgstr "Anyag nyomtatási profil" + +msgid "Maximum acceleration for travel moves" +msgstr "Maximum gyorsulás utazási mozgásokhoz" msgid "" -"This option will drop the temperature of the inactive extruders to prevent " -"oozing. It will enable a tall skirt automatically and move extruders outside " -"such skirt when changing temperatures." +"Maximum acceleration when extruding (M204 P)\n" +"\n" +"Marlin (legacy) firmware flavor will use this also as travel acceleration " +"(M204 T)." msgstr "" -"Ez az opció csökkenti az inaktív extruderek hőmérsékletét, hogy " -"megakadályozza a szivárgást. Automatikusan engedélyezi a magas szoknyát, és " -"az extrudereket a szoknyán kívülre helyezi a hőmérséklet változtatás idejére." +"Maximum gyorsulás extrudáláskor (M204 P)\n" +"\n" +"A Marlin (régi) firmware ezt utazási gyorsulásként is használja (M204 T)." msgid "" -"This option will switch the print order of perimeters and infill, making the " -"latter first." +"Maximum deviation of exported G-code paths from their full resolution " +"counterparts. Very high resolution G-code requires huge amount of RAM to " +"slice and preview, also a 3D printer may stutter not being able to process a " +"high resolution G-code in a timely manner. On the other hand, a low " +"resolution G-code will produce a low poly effect and because the G-code " +"reduction is performed at each layer independently, visible artifacts may be " +"produced." msgstr "" -"Ez az opció felcseréli kerület és a kitöltés nyomtatási sorrendjét, így az " -"utóbbi lesz az első." +"Az exportált szerszámpályák maximális eltérése a teljes felbontású " +"megfelelőiktől a G-kódban. A nagyon nagy felbontású G-kód nagy mennyiségű " +"RAM-ot igényel a szeleteléshez és az előnézethez, továbbá előfordulhat, hogy " +"a 3D nyomtató nem tudja időben feldolgozni a nagy felbontású G-kódot. " +"Másrészt az alacsony felbontású G-kód \"low poly\" effektust okoz, és mivel " +"a G-kód egyszerűsítése minden egyes rétegen egymástól függetlenül történik, " +"látható műtermékek keletkezhetnek." -msgid "This printer will be shown in the presets list as" -msgstr "" -"Ez a nyomtató az előbeállítások listájában a következőképpen jelenik meg" +msgid "Maximum width of a segmented region" +msgstr "Szegmentált régió maximális szélessége" -msgid "" -"This setting controls the height (and thus the total number) of the slices/" -"layers. Thinner layers give better accuracy but take more time to print." +msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" -"Ez a beállítás szabályozza a szeletek/rétegek magasságát (és így a teljes " -"számát). A vékonyabb rétegek nagyobb pontosságot adnak, de több időt vesz " -"igénybe a nyomtatás." +"A szegmentált régió maximális szélessége. A nulla kikapcsolja ezt a funkciót." msgid "" -"This string is edited by RammingDialog and contains ramming specific " -"parameters." +"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." msgstr "" -"Ez a karakterlánc a TömörítésPárbeszéd ablakban szerkeszthető, és a " -"tömörítéssel kapcsolatos paramétereket tartalmaz." +"Az üregesítendő térháló nem alkalmas az üregesítésre (nem foglal magába " +"térfogatot)." -msgid "" -"This value will be added (or subtracted) from all the Z coordinates in the " -"output G-code. It is used to compensate for bad Z endstop position: for " -"example, if your endstop zero actually leaves the nozzle 0.3mm far from the " -"print bed, set this to -0.3 (or fix your endstop)." -msgstr "" -"Ez az érték hozzáadódik (vagy kivonásra kerül) az összes Z koordinátához a " -"kimeneti G-kódban. A Z tengely végállás pozíciójának kompenzálására szolgál: " -"például ha a végállás nullája valójában 0,3 mm-re hagyja a fúvókát a " -"tárgyasztal felett, akkor állítsa ezt az értéke -0,3-ra (vagy javítsa meg a " -"végállást)." +msgid "Minimize application" +msgstr "Alkalmazás minimalizálása" -msgid "" -"This vector saves required volumes to change from/to each tool used on the " -"wipe tower. These values are used to simplify creation of the full purging " -"volumes below. " -msgstr "Ez a vektor tárolja a törlőtornyon használt egyes szerszámok közötti váltáshoz szükséges mennyiségeket. Ezek az értékek az alábbi teljes öblítési mennyiségek létrehozásának egyszerűsítésére szolgálnak. " +msgid "Minimum shell thickness" +msgstr "Minimum héjvastagság" -msgid "" -"This version of %s is not compatible with currently installed configuration " -"bundles.\n" -"This probably happened as a result of running an older %s after using a " -"newer one.\n" -"\n" -"You may either exit %s and try again with a newer version, or you may re-run " -"the initial configuration. Doing so will create a backup snapshot of the " -"existing configuration before installing files compatible with this %s." -msgstr "" -"A %s ezen verziója nem kompatibilis a jelenleg telepített konfigurációs " -"csomagokkal. \n" -"Ez valószínűleg azért történt, mert egy régebbi %s-t futtatott azután, hogy " -"egy korábban újabbat használt.\n" -"\n" -"Vagy kiléphet a %s-ből, és megpróbálhatja újra egy újabb verzióval, vagy " -"újra lefuttathatja az eredeti konfigurációt. Ezzel létrehoz egy biztonsági " -"mentést a meglévő konfigurációról, mielőtt telepítené az ezzel a %s-szel " -"kompatibilis fájlokat." +msgid "Modifiers" +msgstr "Módosítók" -msgid "" -"This will apply a gamma correction to the rasterized 2D polygons. A gamma " -"value of zero means thresholding with the threshold in the middle. This " -"behaviour eliminates antialiasing without losing holes in polygons." -msgstr "" -"Ez gammakorrekciót alkalmaz a raszterizált 2D sokszögekre. A nulla gamma " -"korrekció a középső gammaérték küszöbként való alkalmazását jelenti. Ez a " -"viselkedés megszünteti az élsimítást anélkül, hogy a sokszögek lyukai " -"elvesznének." +msgid "More" +msgstr "Bővebben" -msgid "Threads" -msgstr "Szálak" +msgid "Multimaterial painting" +msgstr "Többanyagú festés" -msgid "" -"Threads are used to parallelize long-running tasks. Optimal threads number " -"is slightly above the number of available cores/processors." -msgstr "" -"A szálak a hosszú futási idejű feladatok párhuzamosítására szolgálnak. A " -"szálak optimális száma valamivel a rendelkezésre álló magok/processzorok " -"száma felett van." +msgid "Names of presets related to the physical printer" +msgstr "A fizikai nyomtatóhoz tartozó előbeállítások nevei" -msgid "Tilt" -msgstr "Billentés" +msgid "Negative Volume" +msgstr "Negatív térfogat" -msgid "Tilt time" -msgstr "Billentési idő" +msgid "New prerelease version %1% is available." +msgstr "Elérhető a(z) %1% új kiadás előtti verziója." -msgid "Time" -msgstr "Idő" +msgid "New printer preset selected" +msgstr "Új nyomtató előbeállítás kiválasztva" -msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." -msgstr "" -"Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " -"2.0) új filamentet tölt be a szerszámcsere során (a T kód végrehajtásakor). " -"Ezt az időt a G-kód időbecslő hozzáadja a teljes nyomtatási időhöz." +msgid "New release version %1% is available." +msgstr "Elérhető a(z) %1% új kiadott verziója." + +msgid "No brim" +msgstr "Nincs karima" msgid "" -"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " -"filament during a tool change (when executing the T code). This time is " -"added to the total print time by the G-code time estimator." +"No color change event was added to the print. The print does not look like a " +"sign." msgstr "" -"Az az idő, amíg a nyomtató vezérlő szoftvere (vagy a Multi Material Unit " -"2.0) az előző Filamenet kiüríti a szerszámcsere során (a T kód " -"végrehajtásakor). Ezt az időt a G-kód időbecslő hozzáadja a teljes " -"nyomtatási időhöz." +"A nyomtatáshoz nem adott hozzá színváltoztatási eseményt. A nyomtatás nem " +"úgy néz ki, mint a nézet." -msgid "Time of the fast tilt" -msgstr "A gyors billenés időtartama" +msgid "No errors detected" +msgstr "Nem észlelhető hiba" -msgid "Time of the slow tilt" -msgstr "A lassú billentés időtartama" +msgid "Note, that the selected preset will be deleted from this printer too." +msgid_plural "" +"Note, that the selected preset will be deleted from these printers too." +msgstr[0] "" +"Vegye figyelembe, hogy a kiválasztott előbeállítás törlődik erről a " +"nyomtatóról is." +msgstr[1] "" +"Vegye figyelembe, hogy a kiválasztott előbeállítás törlődik ezekről a " +"nyomtatókról is." msgid "" -"Time to wait after the filament is unloaded. May help to get reliable " -"toolchanges with flexible materials that may need more time to shrink to " -"original dimensions. " -msgstr "A várakozási idő az filament kiürítése után. Segíthet megbízható szerszámcserét elérni rugalmas anyagok esetén, amelyeknek több időre lehet szükségük ahhoz, hogy az eredeti méretükre zsugorodjanak. " - -msgid "to" -msgstr "hoz_" +"Note, that this printer will be deleted after deleting the selected preset." +msgid_plural "" +"Note, that these printers will be deleted after deleting the selected preset." +msgstr[0] "" +"Vegye figyelembe, hogy ez a nyomtató is törlődik a kiválasztott előbeállítás " +"törlése után." +msgstr[1] "" +"Vegye figyelembe, hogy ezek a nyomtatók is törlődnek a kiválasztott " +"előbeállítás törlése után." -msgid "To do that please specify a new name for the preset." -msgstr "Ehhez adjon meg egy új nevet az előbeállításnak." +msgid "NOTE:" +msgstr "MEGJEGYZÉS:" -msgid "" -"To specify the system certificate store manually, please set the %1% " -"environment variable to the correct CA bundle and restart the application." -msgstr "" -"A rendszer tanúsítványtárolójának manuális megadásához állítsa a %1% " -"környezeti változót a megfelelő CA csomagra, és indítsa újra az alkalmazást." +msgid "Notify about new releases" +msgstr "Értesítés az új kiadásokról" msgid "" -"To use a custom CA file, please import your CA file into Certificate Store / " -"Keychain." +"Number of interface layers to insert between the object(s) and support " +"material. Set to -1 to use support_material_interface_layers" msgstr "" -"Egyéni CA fájl használatához kérjük, importálja a CA fájlt a " -"Tanúsítványtárolóba / Kulcstárba." - -msgid "Toggle %c axis mirroring" -msgstr "%c tengely tükrözésének váltása" - -msgid "too many files" -msgstr "túl sok fájl" - -msgid "Too many overlapping holes." -msgstr "Túl sok átfedő furat." +"Az objektum(ok) és a támaszanyag közé beillesztendő interfész rétegek száma. " +"Állítsa -1-re a support_material_interface_layers használatához" -msgid "Tool" -msgstr "Eszköz" +msgid "Object name: %1%" +msgstr "Objektum név: %1%" -msgid "Tool #" -msgstr "Szerszám #" +msgid "" +"Object size from file %s appears to be zero.\n" +"This object has been removed from the model" +msgid_plural "" +"Objects size from file %s appears to be zero.\n" +"These objects have been removed from the model" +msgstr[0] "" +"A fájlban lévő %s objektum mérete nullának tűnik.\n" +"Ez az objektum eltávolításra került a modellből" +msgstr[1] "" +"A fájlban lévő %s objektumuk mérete nullának tűnik.\n" +"Ezek az objektumok eltávolításra kerültek a modellből" -msgid "Tool change G-code" -msgstr "G-kód Szerszám Váltás" +msgid "object" +msgid_plural "objects" +msgstr[0] "objektum" +msgstr[1] "objektumok" -msgid "Tool changes" -msgstr "Eszköz váltások" +msgid "Objects List" +msgstr "Objektumok Listája" -msgid "Tool marker" -msgstr "Szerszám jelölő" +msgid "On overhangs only" +msgstr "Csak túlnyúlásokon" -msgid "Tool position" -msgstr "Szerszám pozíció" +msgid "One of the presets doesn't found" +msgstr "Az egyik előbeállítás nem található" -msgid "Tool type" -msgstr "Eszköz típus" +msgid "Only lift Z" +msgstr "Csak a Z tengely emelése" -msgid "Toolchange parameters with single extruder MM printers" +msgid "" +"Only the following installed printers are compatible with the selected " +"filaments" msgstr "" -"Szerszámváltási paraméterek egy extruderes Több Anyagos (MM) nyomtatónál" - -msgid "Top" -msgstr "Felül" +"Csak az alábbi telepített nyomtatók kompatibilisek a kiválasztott " +"filamentekkel" msgid "" -"Top / bottom shell thickness hint: Not available due to invalid layer height." +"Only the following installed printers are compatible with the selected SLA " +"materials" msgstr "" -"Felső/alsó héj vastagságra vonatkozó tipp: Nem érhető el az érvénytelen " -"rétegmagasság miatt." - -msgid "Top interface layers" -msgstr "Felső interfész rétegek" - -msgid "Top is open." -msgstr "Felső rész nyitott." - -msgid "Top shell is %1% mm thick for layer height %2% mm." -msgstr "A felső héj %1% mm vastag a %2% mm rétegmagassághoz." - -msgid "Top solid infill" -msgstr "Felső tömör kitöltés" +"Csak az alábbi telepített nyomtatók kompatibilisek a kiválasztott SLA " +"anyagokkal" -msgid "top solid infill" -msgstr "felső tömör kitöltés" +msgid "Ooze prevention" +msgstr "Szivárgás megelőzés" -msgid "Top solid layers" -msgstr "Felső tömör rétegek" +msgid "Open hyperlink in default browser?" +msgstr "Hiperhivatkozás megnyitása az alapértelmezett böngészőben?" -msgid "Top View" -msgstr "Felülnézet" +msgid "Open New Instance" +msgstr "Új Példány Megnyitása" -msgid "Topmost surface only" -msgstr "Csak a legfelső felület" +msgid "Open the dialog to modify shape gallery" +msgstr "Dialógusablak megnyitása az Alakzat Galéria szerkesztéséhez" -msgid "Total" -msgstr "Összes" +msgid "Opening new project while some presets are unsaved." +msgstr "Új projekt megnyitása, miközben néhány előbeállítás nincs elmentve." msgid "" -"Total purging volume is calculated by summing two values below, depending on " -"which tools are loaded/unloaded." +"Opens Tip of the day notification in bottom right corner or shows another " +"tip if already opened." msgstr "" -"A teljes öblítési térfogatot az alábbi két érték összegzésével kell " -"kiszámítani, attól függően, hogy mely szerszámok vannak kiürítve/betöltve." - -msgid "Total rammed volume" -msgstr "Teljes tömörített térfogat" - -msgid "Total ramming time" -msgstr "Teljes tömörítési idő" - -msgid "Transfer" -msgstr "Átvitel" +"Megnyitja a nap tippje értesítést a jobb alsó sarokban, vagy egy másik " +"tippet jelenít meg, ha már nyitva van." -msgid "Transfer the selected options to the newly selected preset \"%1%\"." +msgid "Optimize object rotation for best surface quality." msgstr "" -"A kiválasztott beállítások átvitele az újonnan kijelölt \"%1%\" " -"előbeállításba." +"Az objektum forgatásának optimalizálása a legjobb felületminőség érdekében." -msgid "Transfer the selected settings to the newly selected preset." +msgid "" +"Optimize object rotation to have minimum amount of overhangs needing support " +"structures.\n" +"Note that this method will try to find the best surface of the object for " +"touching the print bed if no elevation is set." msgstr "" -"A kiválasztott beállítások átvitele az újonnan kijelölt előbeállításba." - -msgid "Translate" -msgstr "Eltolás" +"Optimalizálja az objektum forgását, hogy a lehető legkevesebb támasztékot " +"igénylő túlnyúlás legyen.\n" +"Vegye figyelembe, hogy ez a módszer megpróbálja megtalálni az objektum " +"legjobb felületét a tágyasztalhoz való érintkezéshez, amennyiben nincs " +"megadva magasság." -msgid "Translation" -msgstr "Eltolás" +msgid "Options for support material and raft" +msgstr "Támaszanyag és a tutaj lehetőségei" -msgid "Travel" -msgstr "Utazás" +msgid "Order object volumes by types" +msgstr "Objektum térfogatok rendezése típus szerint" -msgid "Triangles" -msgstr "Háromszögek" +msgid "Other" +msgstr "Egyéb" -msgid "" -"Try to repair any non-manifold meshes (this option is implicitly added " -"whenever we need to slice the model to perform the requested action)." -msgstr "" -"Próbálja megjavítani a nem 'manifold' hálót (ez az opció implicit módon " -"hozzáadódik, ha a modellt fel kell szeletelnünk a kért művelet " -"végrehajtásához)." +msgid "Outer and inner brim" +msgstr "Külső és belső karima" -msgid "Type" -msgstr "Típus" +msgid "Outer brim only" +msgstr "Csak külső karima" -msgid "Type here the name of your printer device" -msgstr "Írja be ide a nyomtatóeszköz nevét" +msgid "Outside walls" +msgstr "Külső fal" -msgid "Type of the printer." -msgstr "A nyomtató típusa." +msgid "Overflow" +msgstr "Túlcsordulás" -msgid "Type:" -msgstr "Típus:" +msgid "Paint-on seam" +msgstr "Varrat festése" -msgid "Unable to drill the current configuration of holes into the model." -msgstr "Nem lehet a furatok jelenlegi konfigurációját a modellbe fúrni." +msgid "Paints facets according to the chosen painting brush." +msgstr "A felületeket a választott festőecset szerint festi." msgid "" -"Unable to load the following shaders:\n" -"%s" +"Paints neighboring facets whose relative angle is less or equal to set angle." msgstr "" -"Nem sikerült betölteni a következő Shaderekett:\n" -"%s" - -msgid "Unable to reload:" -msgstr "Újratöltés sikertelen:" - -msgid "Unable to replace with more than one volume" -msgstr "Nem lehet egynél több térfogattal helyettesíteni" - -msgid "Undef" -msgstr "Nem definált" +"Olyan szomszédos oldalakat fest meg, amelyek relatív szöge kisebb vagy " +"egyenlő a beállított szöggel." -msgid "Undef category" -msgstr "Nem definiált kategória" +msgid "Paints only one facet." +msgstr "Csak egy felületet fest meg." -msgid "Undef group" -msgstr "Nem definiált csoport" +msgid "" +"Perform desktop integration (Sets this binary to be searchable by the " +"system)." +msgstr "" +"Asztali integráció végrehajtása (beállítja, hogy a bináris fájl kereshető " +"legyen a rendszer számára)." -msgid "Undefined" -msgstr "Meghatározatlan" +msgid "Plater" +msgstr "Tárgyasztal" -msgid "undefined error" -msgstr "ismeretlen hiba" +msgid "" +"Please save your project and restart PrusaSlicer. We would be glad if you " +"reported the issue." +msgstr "" +"Mentse el a projektet, és indítsa újra a PrusaSlicert. Örülnénk, ha " +"jelentené a problémát." -msgid "Underflow" -msgstr "Alulcsordulás" +msgid "Post processing scripts shall modify G-code file in place." +msgstr "Az utófeldolgozási szkriptek a G-kód fájlt helyben módosítják." -msgid "Undo" -msgstr "Visszavonás" +msgid "" +"Preselects faces by overhang angle. It is possible to restrict paintable " +"facets to only preselected faces when the option \"%1%\" is enabled." +msgstr "" +"A felületeket a túlnyúlási szög alapján választja ki. Ha a \"%1%\" opció " +"engedélyezve van, akkor a festhető lapokat az előre kiválasztott lapokra " +"korlátozhatja." -msgid "Undo %1$d Action" -msgid_plural "Undo %1$d Actions" -msgstr[0] "%1$d Művelet Visszavonása" -msgstr[1] "%1$d Művelet Visszavonása" +msgid "" +"Presets are different.\n" +"Click this button to select the same preset for the right and left preset." +msgstr "" +"Az előbeállítások különbözőek.\n" +"Erre a gombra kattintva ugyanazt az előbeállítást választhatja ki a jobb és " +"a bal előbeállításhoz." -msgid "Undo / Redo is processing" -msgstr "Visszavonás / Mégis folyamatban" +msgid "Presets are the same" +msgstr "Az előbeállítások megyegyeznek" -msgid "Undo desktop integration failed." -msgstr "Az asztal integrációjának visszavonása nem volt sikeres." +msgid "Print speed" +msgstr "Nyomtatási sebesség" -msgid "Undo desktop integration was successful." -msgstr "Az asztal integrációjának visszavonása sikeres volt." +msgid "Print speed override" +msgstr "Nyomtatási sebesség felülbírálás" -msgid "Undo History" -msgstr "Előzmények visszavonása" +msgid "Printer preset names" +msgstr "Nyomtató előbeállítás nevek" -msgid "unexpected decompressed size" -msgstr "váratlan kicsomagolt méret" +msgid "Printer scaling correction in X axis" +msgstr "Nyomtató méretkorrekciója az X tengelyen" -msgid "Unknown" -msgstr "Ismeretlen" +msgid "Printer scaling correction in Y axis" +msgstr "Nyomtató méretkorrekciója az Y tengelyen" -msgid "Unknown error occured" -msgstr "Ismeretlen hiba történt" +msgid "Printer scaling correction in Z axis" +msgstr "Nyomtató méretkorrekciója a Z tengelyen" -msgid "Unknown error occured during exporting G-code." -msgstr "Ismeretlen hiba történt a G-kód exportálása közben." +msgid "Printer scaling X axis correction" +msgstr "Nyomtató méretkorrekciója az X tengelyen" -msgid "unloaded" -msgstr "kiürítve_" +msgid "Printer scaling Y axis correction" +msgstr "Printer scaling correction in Y axis" -msgid "Unloading speed" -msgstr "Kiürítési sebesség" +msgid "Printer scaling Z axis correction" +msgstr "Nyomtató méretkorrekciója a Z tengelyen" -msgid "Unloading speed at the start" -msgstr "Kiürítési sebesség kezdéskor" +msgid "Project is loading" +msgstr "A projekt betöltődik" -msgid "UNLOCKED LOCK" -msgstr "NYITOTT LAKAT" +msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" +msgstr "A PrusaSlicer végzetes hibába ütközött: \"%1%\"" -msgid "" -"UNLOCKED LOCK icon indicates that some settings were changed and are not " -"equal to the system (or default) values for the current option group.\n" -"Click to reset all settings for current option group to the system (or " -"default) values." -msgstr "" -"NYITOTT LAKAT ikon azt jelzi, hogy bizonyos beállítások módosultak, és nem " -"egyenlők az aktuális opciócsoport rendszer- (vagy alapértelmezett) " -"értékével.\n" -"Kattintson az aktuális opciócsoport összes beállításának visszaállításához a " -"rendszer (vagy az alapértelmezett) értékre." +msgid "PrusaSlicer: Open hyperlink" +msgstr "PrusaSlicer: Hiperhivatkozás megnyitása" -msgid "" -"UNLOCKED LOCK icon indicates that the value was changed and is not equal to " -"the system (or default) value.\n" -"Click to reset current value to the system (or default) value." -msgstr "" -"NYITOTT LAKAT ikon azt jelzi, hogy az érték megváltozott, és nem egyenlő a " -"rendszer (vagy az alapértelmezett) értékkel.\n" -"Kattintson az aktuális érték visszaállításához a rendszer (vagy " -"alapértelmezett) értékre." +msgid "Raft" +msgstr "Tutaj" -msgid "Unsaved Changes" -msgstr "Nem Mentett Változások" +msgid "Raft contact Z distance" +msgstr "Tutaj érintkezés Z távolság" -msgid "Unselect gizmo or clear selection" -msgstr "Gizmo kijelölésének megszüntetése, vagy kijelölés megszüntetése" +msgid "Raft expansion" +msgstr "Tutaj kiterjesztés" -msgid "unsupported central directory size" -msgstr "nem támogatott központi könyvtár méret" +msgid "Random sequence" +msgstr "Véletlen sorrend" -msgid "unsupported encryption" -msgstr "nem támogatott titkosítás" +msgid "Re&load from Disk" +msgstr "Újratöltés lemezről" -msgid "unsupported feature" -msgstr "nem támogatott funkció" +msgid "Reduced overhang slopes" +msgstr "Csökkentett túlnyúlás meredekség" -msgid "unsupported method" -msgstr "nem támogatott eljárás" +msgid "Reducing printing time" +msgstr "Nyomtatási idő csökkentése" -msgid "unsupported multidisk archive" -msgstr "nem támogatott többlemezes archívum" +msgid "Regular" +msgstr "Általános" -msgid "Unsupported OpenGL version" -msgstr "Nem támogatott OpenGL verzió" +msgid "Regular expression" +msgstr "Reguláris kifejezés" -msgid "Unsupported selection" -msgstr "Nem támogatott kijelölés" +msgid "Release only" +msgstr "Csak normál kiadás" -msgid "Untitled" -msgstr "Névtelen" +msgid "Remaining errors" +msgstr "Fennmaradó hibák" -msgid "up to" -msgstr "legfeljebb" +msgid "Remove Multi Material painting" +msgstr "Többanyagú festés eltávolítása" -msgid "Update available" -msgstr "Frissítés elérhető" +msgid "Remove paint-on seam" +msgstr "Felfestett varratok eltávolítása" -msgid "Update built-in Presets automatically" -msgstr "Beépített Előbeállítások automatikus frissítése" +msgid "Remove paint-on supports" +msgstr "Felfestett támasztékok eltávolítása" -msgid "Updates" -msgstr "Frissítések" +msgid "Remove variable layer height" +msgstr "Változó rétegmagasság eltávolítása" -msgid "" -"Updates are never applied without user's consent and never overwrite user's " -"customized settings." -msgstr "" -"A frissítések soha nem kerülnek telepítésre a felhasználó beleegyezése " -"nélkül, és soha nem írják felül a felhasználó egyéni beállításait." +msgid "Repairing model" +msgstr "Modell javítása" -msgid "Updating" -msgstr "Frissítés" +msgid "Repairing was canceled" +msgstr "A javítást vissza lett vonva" -msgid "Upgrade" -msgstr "Frissítés" +msgid "Replace from:" +msgstr "Helyettesítés innen:" -msgid "Upload" -msgstr "Feltöltés" +msgid "Replace with" +msgstr "Csere erre" -msgid "Upload a firmware image into an Arduino based printer" -msgstr "Firmware feltöltése Arduino alapú nyomtatóra" +msgid "Replace with STL" +msgstr "Helyettesítés STL-lel" -msgid "Upload and Print" -msgstr "Feltöltés és Nyomtatás" +msgid "Restart application" +msgstr "Alkalmazás újraindítása" -msgid "Upload and Simulate" -msgstr "Feltöltés és Szimuláció" +msgid "Restore window position on start" +msgstr "Ablak pozíciójának visszaállítása indításkor" -msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "A feltöltött fájl neve nem végződik „%s”-ra. Szeretné folytatni?" +msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)" +msgstr "" +"Visszahúzás, ha a szerszám ki van kapcsolva (több extruderes beállítások " +"speciális beállításai)" -msgid "Upload not enabled on FlashAir card." -msgstr "A FlashAir kártyán nincs engedélyezve a feltöltés." +msgid "Revert color to default" +msgstr "Szín visszaállítása az alapértelmezettre" -msgid "Upload to Printer Host with the following filename:" -msgstr "Feltöltés a Nyomtató gazdagépére a következő fájlnévvel:" +msgid "Revert conversion from meters" +msgstr "Konvertálás visszavonása (metrikus mértékegységről)" -msgid "Uploading" -msgstr "Feltöltés" +msgid "Right Preset Value" +msgstr "Jobb Előbeállítás Értéke" -msgid "" -"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " -"close all holes in the model." +msgid "Rotate the model to have the lowest z height for faster print time." msgstr "" -"A 3DLabPrint repülőgépmodellekhez használja a \"Páros-páratlan\" opciót. " -"Használja a \"Lyukak bezárása\" opciót a modellen lévő összes lyuk " -"bezárásához." +"Forgassa úgy a modellt, hogy a Z magasság a legkisebb legyen, a rövidebb " +"nyomtatási idő érdekében." -msgid "Use another extruder" -msgstr "Másik extruder használata" +msgid "Same as top" +msgstr "Megegyezik a felsővel" -msgid "Use colors for axes values in Manipulation panel" -msgstr "Használjon színeket a tengelyértékekhez a Manipuláció panelen" +msgid "Save project" +msgstr "Projekt mentése" -msgid "Use custom size for toolbar icons" -msgstr "Egyéni méretet használata az eszköztár ikonjaihoz" +msgid "Save support points?" +msgstr "Támasztópontok mentése?" -msgid "Use environment map" -msgstr "Környezeti térkép használata" +msgid "Seams" +msgstr "Varratok" -msgid "Use firmware retraction" -msgstr "Firmware visszahúzás használata" +msgid "See Download page." +msgstr "Tekintse meg a Letöltési oldalt." -msgid "Use for search" -msgstr "Kereséshez használja" +msgid "Select a file" +msgstr "Válasszon egy fájlt" -msgid "Use forward slashes ( / ) as a directory separator if needed." -msgstr "Ha szükséges, használjon perjeleket ( / ) könyvtárelválasztóként." +msgid "Select presets to compare" +msgstr "Előbeállítások kiválasztása az összehasonlításhoz" -msgid "Use free camera" -msgstr "Szabad kamera használata" +msgid "Select the new file" +msgstr "Válassza ki az új fájlt" -msgid "Use inches" -msgstr "Inch használata" +msgid "Sequential printing" +msgstr "Szekvenciális nyomtatás" -msgid "Use pad" -msgstr "Párna használata" +msgid "Set auto color changes" +msgstr "Automatikus színváltás beállítása" -msgid "Use perspective camera" -msgstr "Perspektivikus kamera használata" +msgid "Set default extruder for the selected items" +msgstr "Alapértelmezett extruder beállítása a kiválasztott elemekhez" -msgid "Use relative E distances" -msgstr "Relatív E távolságok használata" +msgid "Set extruder number for the selected items" +msgstr "Extruder számának beállítása a kiválasztott elemekhez" -msgid "Use Retina resolution for the 3D scene" -msgstr "Retina felbontás használata 3D jelenethez" +msgid "Set Printable group" +msgstr "Csoport beállítása nyomtathatónak" -msgid "Use system menu for application" -msgstr "Rendszermenü használata az alkalmazáshoz" +msgid "Set selected items as Printable/Unprintable" +msgstr "A kiválasztott elemek beállítása nyomtatható/nem nyomtathatóként" -msgid "" -"Use this setting to rotate the support material pattern on the horizontal " -"plane." -msgstr "" -"Ezzel a beállítással elforgathatja a támaszanyag mintázatát a vízszintes " -"síkon." +msgid "Set settings tabs as menu items (experimental)" +msgstr "Beállítások fülsáv megjelenítése menüelemként (kísérleti)" -msgid "Use volumetric E" -msgstr "Használjon volumetrikus E paramétert" +msgid "Set Unprintable group" +msgstr "Csoport beállítása nem nyomtathatónak" -msgid "used" -msgstr "használatban" +msgid "Shape Gallery" +msgstr "Alakzat Galéria" -msgid "Used filament" -msgstr "Felhasznált filament" +msgid "Shift objects to bed" +msgstr "Tárgyak tárgyasztalba helyezése" -msgid "Used Filament (g)" -msgstr "Felhasznált Filament (g)" +msgid "Show &Labels" +msgstr "Címkék Mutatása" -msgid "Used Filament (in)" -msgstr "Felhasznált Filament (in)" +msgid "Show \"Tip of the day\" notification after start" +msgstr "A „Nap tippje” értesítés megjelenítése a program indításakor" -msgid "Used Filament (in³)" -msgstr "Felhasznált Filament (in³)" +msgid "Show all presets (including incompatible)" +msgstr "Minden előbeállítás megjelenítése (beleértve az inkompatibiliseket is)" -msgid "Used Filament (m)" -msgstr "Felhasznált Filament (m)" +msgid "Show Tip of the Day" +msgstr "Nap Tippje Mutatása" -msgid "Used Filament (mm³)" -msgstr "Felhasznált Filament (mm³)" +msgid "Show/Hide G-code window" +msgstr "G-kód ablak megjelenítése/elrejtése" -msgid "Used Material (ml)" -msgstr "Felhasznált Anyag (ml)" +msgid "Sinking" +msgstr "Süllyedés" -msgid "Used Material (unit)" -msgstr "Felhasznált Alapanyag (egység)" +msgid "Size and coordinates" +msgstr "Méret és koordináták" -msgid "User" -msgstr "Felhasználó" +msgid "Skirt and brim" +msgstr "Szoknya és karima" -msgid "User presets" -msgstr "Felhasználói előbeállítások" +msgid "Skirt/Brim" +msgstr "Szoknya/Karima" -msgid "validation failed" -msgstr "validáció sikertelen" +msgid "SLA materials" +msgstr "SLA anyagok" -msgid "Value is the same as the system value" -msgstr "Az érték megegyezik a rendszerváltozóval" +msgid "Slice resolution" +msgstr "Szelet felbontása" -msgid "" -"Value was changed and is not equal to the system value or the last saved " -"preset" +msgid "Sliced object \"%1%\" looks like a logo or a sign" msgstr "" -"Az érték megváltozott, és nem egyenlő a rendszerváltozóval vagy az utoljára " -"mentett előbeállítással" - -msgid "Values in this column are for Normal mode" -msgstr "Ez az oszlop a Normál módra vonatkozik" +"A \"%1%\" szeletelt objektum úgy néz ki, mint egy logó vagy egy felirat" -msgid "Values in this column are for Stealth mode" -msgstr "Ez az oszlop a Lopakodó módra vonatkozik" +msgid "Slicing Mode" +msgstr "Szeletelési mód" -msgid "Variable layer height" -msgstr "Változó rétegmagasság" +msgid "Smart fill" +msgstr "Okos kitöltés" -msgid "Variable layer height - Adaptive" -msgstr "Változó rétegmagasság - Adaptív" +msgid "Smart fill angle" +msgstr "Okos kitöltés szög" -msgid "Variable layer height - Manual edit" -msgstr "Változó rétegmagasság - Kézi szerkesztés" +msgid "Snug" +msgstr "Simulékony" -msgid "Variable layer height - Reset" -msgstr "Változó rétegmagasság - Reset" +msgid "Solid " +msgstr "Félkövér " -msgid "Variable layer height - Smooth all" -msgstr "Változó rétegmagasság - Sima összes" +msgid "Some filaments were uninstalled." +msgstr "Néhány filament eltávolításra került." -msgid "variants" -msgstr "változatok" +msgid "Some objects are not visible during editing." +msgstr "Egyes objektumok nem láthatók szerkesztés közben." -msgid "vendor" -msgstr "gyártó" +msgid "" +"Some presets are modified and the unsaved changes will not be captured by " +"the configuration snapshot." +msgstr "" +"Néhány előbeállítás módosult, és a nem mentett változásokat a konfigurációs " +"pillanatkép nem rögzíti." -msgid "Vendor:" -msgstr "Gyártó:" +msgid "" +"Some presets are modified and the unsaved changes will not be exported into " +"configuration bundle." +msgstr "" +"Egyes előre beállított értékek módosultak, és a nem mentett módosítások nem " +"kerülnek exportálásra a konfigurációs csomagba." -msgid "Verbose G-code" -msgstr "Bővebb G-kód" +msgid "Some Printers were uninstalled." +msgstr "Néhány nyomtató eltávolításra került." -msgid "Version" -msgstr "Verzió" +msgid "Some SLA materials were uninstalled." +msgstr "Néhány SLA anyag eltávolításra került." -msgid "version" -msgstr "verzió" +msgid "" +"Speed for movements along the Z axis.\n" +"When set to zero, the value is ignored and regular travel speed is used " +"instead." +msgstr "" +"A Z tengely mentén történő mozgások sebessége.\n" +"Ha nullára van állítva, akkor az értéket figyelmen kívül hagyjuk, és " +"helyette a normál utazási sebességet használjuk." -msgid "Vertical shells" -msgstr "Függőleges héjak" +msgid "Speed for non-print moves" +msgstr "Sebesség nem nyomtatási mozgásokhoz" -msgid "Vertical Slider" -msgstr "Függőleges Csúszka" +msgid "Speed for print moves" +msgstr "Sebesség nyomtatási mozgásokhoz" -msgid "Vertical slider - Move active thumb Down" -msgstr "Függőleges csúszka - Aktív jelölő mozgatása Le" +msgid "Split triangles" +msgstr "Háromszögek felosztása" -msgid "Vertical slider - Move active thumb Up" -msgstr "Függőleges csúszka - Aktív jelölő mozgatása Fel" +msgid "Splits bigger facets into smaller ones while the object is painted." +msgstr "Az objektum festése közben a nagyobb felületeket kisebbekre osztja." -msgid "View" -msgstr "Nézet" +msgid "Stack overflow" +msgstr "Verem túlcsordulás" -msgid "View mode" -msgstr "Megjelenítési mód" +msgid "Style" +msgstr "Stílus" msgid "" -"Visit \"Preferences\" and check \"%1%\"\n" -"to be asked about unsaved changes again." +"Style and shape of the support towers. Projecting the supports into a " +"regular grid will create more stable supports, while snug support towers " +"will save material and reduce object scarring." msgstr "" -"Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" " -"lehetőséget.\n" -"hogy újra rákérdezzen a nem mentett módosításokra." +"A támaszok stílusa és formája. A támaszok szabályos rácsba vetítése " +"stabilabb támaszokat hoz létre, míg a simulékony támasz tornyok anyagot " +"takarítanak meg és csökkentik az objektumok hegesedését." msgid "" -"Visit \"Preferences\" and check \"%1%\"\n" -"to changes your choice." +"Switching the printer technology from %1% to %2%.\n" +"Some %1% presets were modified, which will be lost after switching the " +"printer technology." msgstr "" -"Látogasson el a \"Beállítások\" menüpontba, és jelölje be a \"%1%\" \n" -"lehetőséget a választása módosításához." - -msgid "Visualize an already sliced and saved G-code" -msgstr "Egy már felszeletelt és elmentett G-kód megjelenítése" - -msgid "Visualizing supports" -msgstr "Támasztékok vizualizálása" +"A nyomtatási technológia átváltása %1%-ról %2%-ra. \n" +"Néhány %1% előbeállítás módosult, amelyek a nyomtatási technológia átváltása " +"után elvesznek." -msgid "Volume" -msgstr "Térfogat" +msgid "Taking a configuration snapshot" +msgstr "Konfigurációs pillanatkép készítése" -msgid "Volume to purge (mm³) when the filament is being" -msgstr "Tisztítandó térfogat (mm³), amikor a filament" +msgid "Taking a configuration snapshot failed." +msgstr "A konfigurációs pillanatfelvétel készítése nem sikerült." -msgid "Volumes in Object reordered" -msgstr "Az objektumban lévő térfogatok átrendezve" +msgid "Temperature (°C)" +msgstr "Hőmérséklet (°C)" -msgid "Volumetric" -msgstr "A volumetrikus" +msgid "Template Custom G-code" +msgstr "G-kód Egyedi Minta" -msgid "Volumetric flow hints not available" -msgstr "Térfogatáramlási tippek nem állnak rendelkezésre" +msgid "Text colors" +msgstr "Szöveg színek" -msgid "Volumetric flow rate" -msgstr "Térfogatáram" +msgid "" +"The active configuration was created by %1% %2%,\n" +"while a newer configuration was found in %3%\n" +"created by %1% %4%.\n" +"\n" +"Shall the newer configuration be imported?\n" +"If so, your active configuration will be backed up before importing the new " +"configuration." +msgstr "" +"Az aktív konfigurációt a %1% %2% hozta létre, míg a %3%-ban " +"egy újabb konfigurációt találtak, amelyet a %1% %4% hozott létre.\n" +"\n" +"Importáljuk az újabb konfigurációt? \n" +"Ha igen, akkor az aktív konfigurációról biztonsági másolat készül az új " +"konfiguráció importálása előtt." -msgid "Volumetric flow rate (mm³/s)" -msgstr "Térfogatáram (mm³/s)" +msgid "The following characters are not allowed by a FAT file system:" +msgstr "A következő karaktereket a FAT fájlrendszer nem támogatja:" -msgid "Volumetric speed" -msgstr "Térfogati sebesség" +msgid "" +"The following line %s contains reserved keywords.\n" +"Please remove it, as it may cause problems in G-code visualization and " +"printing time estimation." +msgid_plural "" +"The following lines %s contain reserved keywords.\n" +"Please remove them, as they may cause problems in G-code visualization and " +"printing time estimation." +msgstr[0] "" +"A következő %s sor foglalt kulcsszavakat tartalmaz.\n" +"Kérjük, távolítsa el ezt, mivel problémákat okozhat a G-kód megjelenítésében " +"és a nyomtatási idő becslésében." +msgstr[1] "" +"A következő %s sorok foglalt kulcsszavakat tartalmaznak.\n" +"Kérjük, távolítsa el ezeket, mivel problémákat okozhat a G-kód " +"megjelenítésében és a nyomtatási idő becslésében." -msgid "Wall thickness" -msgstr "Falvastagság" +msgid "The following model was repaired successfully" +msgid_plural "The following models were repaired successfully" +msgstr[0] "A következő modell javítása sikerült" +msgstr[1] "A következő modellek javítása sikerült" -msgid "Warning" -msgstr "Figyelmeztetés" +msgid "The following preset was modified" +msgid_plural "The following presets were modified" +msgstr[0] "A következő előbeállítás módosult" +msgstr[1] "A következő előbeállítások módosultak" -msgid "WARNING:" -msgstr "FIGYELMEZTETÉS:" +msgid "" +"The imported SLA archive did not contain any presets. The current SLA " +"presets were used as fallback." +msgstr "" +"Az importált SLA-archívum nem tartalmazott előbeállításokat. Az aktuális SLA " +"előbeállítások kerülnek felhasználásra." -msgid "Welcome" -msgstr "Üdvözlés" +msgid "The name cannot be the same as a preset alias name." +msgstr "A név nem lehet azonos egy előbeállítás helyettesítő(alias) nevével." -msgid "Welcome to the %s Configuration Assistant" -msgstr "Üdvözli a %s Konfigurációs Asszisztens" +msgid "The object is too small" +msgstr "Az objektum túl kicsi" -msgid "Welcome to the %s Configuration Wizard" -msgstr "Üdvözöli a %s Konfigurációs Varázsló" +msgid "" +"The physical printer below is based on the preset, you are going to delete." +msgid_plural "" +"The physical printers below are based on the preset, you are going to delete." +msgstr[0] "" +"Az alábbi fizikai nyomtató azon az előbeállításon alapul, amelyet törölni " +"készül." +msgstr[1] "" +"Az alábbi fizikai nyomtatók azon az előbeállításon alapulnak, amelyet " +"törölni készül." -msgid "What would you like to do with \"%1%\" preset after saving?" -msgstr "Mit szeretne tenni a \"%1%\" előbeállítással a mentés után?" +msgid "" +"The physical printer below is based only on the preset, you are going to " +"delete." +msgid_plural "" +"The physical printers below are based only on the preset, you are going to " +"delete." +msgstr[0] "" +"Az alábbi fizikai nyomtató csak azon az előbeállításon alapul, amelyet " +"törölni készül." +msgstr[1] "" +"Az alábbi fizikai nyomtatók csak azon az előbeállításon alapulnak, amelyet " +"törölni készül." msgid "" -"When checked, the print and filament presets are shown in the preset editor " -"even if they are marked as incompatible with the active printer" +"The places where the brim will be printed around each object on the first " +"layer." msgstr "" -"Ha be van jelölve, a nyomtatási és filament előbeállítások akkor is " -"megjelennek az előbeállítás szerkesztőben, ha az aktív nyomtatóval nem " -"kompatibilisként vannak megjelölve" +"Azok a helyek, ahol a karima az első réteg minden egyes objektuma köré " +"kinyomtatásra kerül." msgid "" -"When checked, whenever dragging and dropping a project file on the " -"application, shows a dialog asking to select the action to take on the file " -"to load." -msgstr "" -"Ha be van jelölve, amikor egy projektfájlt az alkalmazásra húz és ejt, " -"megjelenik egy párbeszédpanel, amelyben ki kell választani a betöltendő " -"fájlra vonatkozó műveletet." +"The preset below was temporarily installed on the active instance of " +"PrusaSlicer" +msgid_plural "" +"The presets below were temporarily installed on the active instance of " +"PrusaSlicer" +msgstr[0] "" +"Az alábbi_ előbeállítás ideiglenesen telepítve lett a PrusaSlicer aktív " +"példányára" +msgstr[1] "" +"Az alábbi_ előbeállítások ideiglenesen telepítve lettek a PrusaSlicer aktív " +"példányára" + +msgid "The preset modifications are successfully saved" +msgid_plural "The presets modifications are successfully saved" +msgstr[0] "Az előbeállítás módosításai sikeresen elmentésre kerültek" +msgstr[1] "Az előbeállítások módosításai sikeresen elmentésre kerültek" + +msgid "The provided file name is not valid." +msgstr "A megadott fájlnév érvénytelen." + +msgid "The provided name is not valid;" +msgstr "A megadott név érvénytelen;" msgid "" -"When printing multi-material objects, this settings will make Slic3r to clip " -"the overlapping object parts one by the other (2nd part will be clipped by " -"the 1st, 3rd part will be clipped by the 1st and 2nd etc)." +"The selected 3MF contains FDM supports painted object using a newer version " +"of PrusaSlicer and is not compatible." msgstr "" -"Több anyagból készült objektumok nyomtatásakor ez a beállítás arra utasítja " -"a Slic3r-t, hogy az átfedő objektumrészeket egymás után vágja le (2. részbe " -"belevág az 1. rész, a 3. részbe belevág 1. és 2. rész, stb.)." +"A kiválasztott 3MF a PrusaSlicer újabb verziójával készült FDM támaszték " +"festett objektumot tartalmaz, és nem kompatibilis." msgid "" -"When printing multiple objects or copies, this feature will complete each " -"object before moving onto next one (and starting it from its bottom layer). " -"This feature is useful to avoid the risk of ruined prints. Slic3r should " -"warn and prevent you from extruder collisions, but beware." +"The selected 3MF contains multi-material painted object using a newer " +"version of PrusaSlicer and is not compatible." msgstr "" -"Több objektum vagy másolat nyomtatásakor ez a funkció minden egyes " -"objektumot befejez, mielőtt a következőre lépne (és azt az alsó rétegről " -"kezdi). Ez a funkció hasznos az elhibázott nyomtatások kockázatának " -"elkerülése érdekében. A Slic3r elvileg figyelmeztet és megakadályozza az " -"extruder ütközéseket, de azért figyeljen." +"A kiválasztott 3MF a PrusaSlicer újabb verziójával készült, több anyagos " +"festett objektumot tartalmaz, és nem kompatibilis." msgid "" -"When retraction is triggered, filament is pulled back by the specified " -"amount (the length is measured on raw filament, before it enters the " -"extruder)." +"The selected 3MF contains seam painted object using a newer version of " +"PrusaSlicer and is not compatible." msgstr "" -"A visszahúzáskor a filament az itt megadott mértékben visszahúzódik (a " -"hosszúság a nyers szálon mérendő, mielőtt az belépne az extruderbe)." +"A kiválasztott 3MF a PrusaSlicer egy újabb verziójával készült varrat " +"festett objektumot tartalmaz, és nem kompatibilis." msgid "" -"When set to zero, the distance the filament is moved from parking position " -"during load is exactly the same as it was moved back during unload. When " -"positive, it is loaded further, if negative, the loading move is shorter " -"than unloading. " -msgstr "Ha nullára van állítva, akkor a filamentet a betöltés során a parkolóhelyzetből pontosan ugyanannyira kerül előtolásra, mint amennyire a kiürítéskor vissza lett húzva. Ha pozitív, akkor tovább töltődik, ha negatív, akkor a betöltési mozgás rövidebb, mint a kiürítési. " +"The selected object couldn't be split because it contains only one solid " +"part." +msgstr "" +"A kijelölt objektumot nem lehetett szétválasztani, mert csak egy szilárd " +"alkatrészt tartalmaz." msgid "" -"When the retraction is compensated after the travel move, the extruder will " -"push this additional amount of filament. This setting is rarely needed." +"The sequential print is on.\n" +"It's impossible to apply any custom G-code for objects printing sequentually." msgstr "" -"Amikor a visszahúzás kompenzálásra kerül utazási mozgás után, az extruder " -"ezt a további szálmennyiséget nyomja előre. Erre a beállításra ritkán van " -"szükség." - -msgid "WHITE BULLET" -msgstr "SZÜRKE PÖTTY" +"A szekvenciális nyomtatás aktív.\n" +"Ilyenkor nem lehet az objektumokhoz egyéni G-kódot adni." -msgid "WHITE BULLET icon indicates a non system (or non default) preset." -msgstr "" -"A SZÜRKE PÖTTY ikon a rendszeren kívüli (vagy nem alapértelmezett) " -"előbeállítást jelzi." +msgid "The size of the object is zero" +msgstr "Az objektum mérete zéró" msgid "" -"WHITE BULLET icon indicates that the settings are the same as in the last " -"saved preset for the current option group." +"The SLA archive doesn't contain any presets. Please activate some SLA " +"printer preset first before importing that SLA archive." msgstr "" -"A SZÜRKE PÖTTY ikon azt jelzi, hogy a beállítások megegyeznek az aktuális " -"opciócsoport utoljára mentett előbeállításával." +"Az SLA archívum nem tartalmaz előbeállításokat. Kérjük, aktiváljon néhány " +"SLA nyomtató előbeállítást az SLA archívum importálása előtt." msgid "" -"WHITE BULLET icon indicates that the value is the same as in the last saved " -"preset." +"The vertical distance between object and raft. Ignored for soluble interface." msgstr "" -"A SZÜRKE PÖTTY azt jelzi, hogy az érték megegyezik az utoljára mentett " -"előbeállítással." - -msgid "Whole word" -msgstr "Teljes szó" - -msgid "Width" -msgstr "Szélesség" - -msgid "Width (mm)" -msgstr "Szélesség (mm)" - -msgid "Width from the back sphere center to the front sphere center" -msgstr "Szélesség a hátsó gömb középpontjától az első gömb középpontjáig" +"Az objektum és a tutaj közötti függőleges távolság. Oldható határfelület " +"esetén figyelmen kívül hagyva." -msgid "Width of a wipe tower" -msgstr "A törlőtorony szélessége" +msgid "There is an object with no extrusions in the first layer." +msgstr "" +"Van egy olyan objektum, amihez nem tartozik extrudálás az első rétegen." msgid "" -"Width of the connector sticks which connect the object and the generated pad." +"This action is not revertible.\n" +"Do you want to proceed?" msgstr "" -"Az objektumot és a generált párnát összekötő csatlakozó pálcák szélessége." +"Ez a művelet nem visszavonható.\n" +"Akarja folytatni?" -msgid "Width of the display" -msgstr "Kijelző szélessége" +msgid "This action will cause deletion of all ticks on vertical slider." +msgstr "" +"Ez a művelet a függőleges csúszkán lévő összes jelölő törléséhez vezet." msgid "" -"Will inflate or deflate the sliced 2D polygons according to the sign of the " -"correction." +"This file contains several objects positioned at multiple heights.\n" +"Instead of considering them as multiple objects, should \n" +"the file be loaded as a single object having multiple parts?" msgstr "" -"A szeletelt 2D poligonokat megnöveli vagy összezsugorítja a korrekció " -"előjelének megfelelően." - -msgid "Wipe" -msgstr "Törlés" - -msgid "Wipe into this object" -msgstr "Törlés ebbe az objektumba" - -msgid "Wipe into this object's infill" -msgstr "Törlés az objektum kitöltésébe" - -msgid "Wipe Tower" -msgstr "Törlőtorony" - -msgid "Wipe tower" -msgstr "Törlőtorony" - -msgid "wipe tower" -msgstr "törlőtorony" - -msgid "Wipe tower - Purging volume adjustment" -msgstr "Törlőtorony - Öblítési mennyiség beállítása" - -msgid "Wipe tower brim width" -msgstr "Törlőtorony karima szélesség" - -msgid "Wipe tower parameters" -msgstr "Törlőtorony paraméterek" - -msgid "Wipe tower rotation angle" -msgstr "Törlőtorony forgatási szöge" - -msgid "Wipe tower rotation angle with respect to x-axis." -msgstr "Törlőtorony forgatási szöge az x-tengelyhez képest." +"Ez a fájl több, különböző magasságban elhelyezett objektumot tartalmaz.\n" +"Több különálló objektum helyett, egyetlen, több részből álló objektumként " +"kell betölteni őket?" -msgid "Wipe while retracting" -msgstr "Törlés visszahúzás közben" +msgid "This is wipe tower layer" +msgstr "Ez egy törlőtorony réteg" msgid "" -"With bowden extruders, it may be wise to do some amount of quick retract " -"before doing the wipe movement." +"This may cause problems in g-code visualization and printing time estimation." msgstr "" -"A bowdenes extruderekkel célszerű lehet, ha a törlőmozgást megelőzően " -"bizonyos mennyiségű gyors visszahúzást végez." +"Ez problémákat okozhat a g-kód megjelenítésében és a nyomtatási idő " +"becslésében." -msgid "" -"With draft shield active, the skirt will be printed skirt_distance from the " -"object, possibly intersecting brim.\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt_height.\n" -"This is useful to protect an ABS or ASA print from warping and detaching " -"from print bed due to wind draft." -msgstr "" -"Ha a huzatvédő aktív, akkor szoknyát az objektumtól 'szoknya_távolságra' " -"nyomtatjuk ki, esetleg a karimát metsző módon.\n" -"Engedélyezve = a szoknya olyan magas, mint a legmagasabb nyomtatott " -"objektum.\n" -"Korlátozott = a szoknya olyan magas, mint a 'szoknya_magasság' által " -"meghatározott magasság.\n" -"Ez a funkció hasznos ABS vagy ASA munkadarabok védelmére, hogy azok huzat " -"miatt ne vetemedjenek meg és ne váljanak le a nyomtatóágyról." +msgid "Tilt" +msgstr "Billentés" -msgid "With sheath around the support" -msgstr "Burkolat a támasz körül" +msgid "Tilt time" +msgstr "Billentési idő" -msgid "World coordinates" -msgstr "Világ koordináták" +msgid "Tool type" +msgstr "Eszköz típus" -msgid "" -"Would you like to install it?\n" -"\n" -"Note that a full configuration snapshot will be created first. It can then " -"be restored at any time should there be a problem with the new version.\n" -"\n" -"Updated configuration bundles:" +msgid "Toolchange parameters with single extruder MM printers" msgstr "" -"Szeretné telepíteni?\n" -"\n" -"Felhívjuk a figyelmet arra, hogy először egy teljes konfigurációs " -"pillanatfelvétel készül. Ez a későbbiekben bármikor visszaállítható, ha " -"probléma merülne fel az új verzióval.\n" -"\n" -"Frissített konfigurációs csomagok:" +"Szerszámváltási paraméterek egy extruderes Több Anyagos (MM) nyomtatónál" -msgid "write calledback failed" -msgstr "írás calledback sikertelen" +msgid "Top interface layers" +msgstr "Felső interfész rétegek" -msgid "Write information about the model to the console." -msgstr "A modellre vonatkozó információk írása a konzolra." +msgid "Total" +msgstr "Összes" -msgid "Wrong password" -msgstr "Rossz jelszó" +msgid "Unable to drill the current configuration of holes into the model." +msgstr "Nem lehet a furatok jelenlegi konfigurációját a modellbe fúrni." -msgid "X coordinate of the left front corner of a wipe tower" -msgstr "A törlőtorony bal első sarkának X-koordinátája" +msgid "Unable to replace with more than one volume" +msgstr "Nem lehet egynél több térfogattal helyettesíteni" -msgid "XY separation between an object and its support" -msgstr "XY elválasztás egy objektum és annak támasztója között" +msgid "Undef category" +msgstr "Nem definiált kategória" -msgid "" -"XY separation between an object and its support. If expressed as percentage " -"(for example 50%), it will be calculated over external perimeter width." -msgstr "" -"XY elválasztás egy objektum és a támasztószerkezet között. Ha százalékban " -"van megadva (például 50%), akkor a külső kerület szélességére kell számítani." +msgid "Undef group" +msgstr "Nem definiált csoport" -msgid "Y coordinate of the left front corner of a wipe tower" -msgstr "A törlőtorony bal első sarkának Y koordinátája" +msgid "Underflow" +msgstr "Alulcsordulás" -msgid "" -"You are currently editing SLA support points. Please, apply or discard your " -"changes first." -msgstr "" -"Jelenleg SLA támasztási pontokat szerkeszt. Kérjük, először alkalmazza vagy " -"dobja el a módosításokat." +msgid "Undo / Redo is processing" +msgstr "Visszavonás / Mégis folyamatban" -msgid "You are opening %1% version %2%." -msgstr "Ön a %1% %2% verzióját nyitja meg." +msgid "Undo desktop integration failed." +msgstr "Az asztal integrációjának visszavonása nem volt sikeres." -msgid "You can keep presets modifications to the new project or discard them" -msgstr "" -"Az előbeállítások módosításait megtarthatja az új projekthez, vagy elvetheti " -"őket" +msgid "Undo desktop integration was successful." +msgstr "Az asztal integrációjának visszavonása sikeres volt." -msgid "" -"You can keep presets modifications to the new project, discard them or save " -"changes as new presets.\n" -"Note, if changes will be saved then new project wouldn't keep them" -msgstr "" -"Az előbeállítások módosításait megtarthatja az új projekthez, elvetheti " -"őket, vagy új előbeállításként elmentheti a változtatásokat.\n" -"Megjegyzés: ha a módosítások elmentésre kerülnek, akkor az új projekt nem " -"tartja meg őket" +msgid "Unsaved Changes" +msgstr "Nem Mentett Változások" -msgid "You can open only one .gcode file at a time." -msgstr "Egyszerre csak egy .gcode fájlt nyithat meg." +msgid "Untitled" +msgstr "Névtelen" -msgid "You can put your notes regarding the filament here." -msgstr "A filamenttel kapcsolatos jegyzeteit ide teheti." +msgid "Updating" +msgstr "Frissítés" -msgid "You can put your notes regarding the printer here." -msgstr "A nyomtatóval kapcsolatos megjegyzéseit ide írhatja be." +msgid "Upload" +msgstr "Feltöltés" -msgid "You can put your notes regarding the SLA print material here." -msgstr "Az SLA anyaggal kapcsolatos jegyzeteit ide írhatja." +msgid "Upload and Print" +msgstr "Feltöltés és Nyomtatás" -msgid "" -"You can set this to a positive value to disable fan at all during the first " -"layers, so that it does not make adhesion worse." -msgstr "" -"Beállíthatja egy pozitív értékre, hogy az első megadott számú rétegnél " -"teljesen letiltsa a ventilátort, így az nem rontja a tapadást." +msgid "Upload and Simulate" +msgstr "Feltöltés és Szimuláció" -msgid "You can't change a type of the last solid part of the object." -msgstr "Az objektum utolsó tömör részének típusát nem lehet megváltoztatni." +msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" +msgstr "A feltöltött fájl neve nem végződik „%s”-ra. Szeretné folytatni?" msgid "" -"You can't to add the object(s) from %s because of one or some of them " -"is(are) multi-part" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." msgstr "" -"Nem lehet hozzáadni az objektum(ok)at %s-ből, mert az egyik vagy néhány " -"közülük több részből áll(nak)" +"A 3DLabPrint repülőgépmodellekhez használja a \"Páros-páratlan\" opciót. " +"Használja a \"Lyukak bezárása\" opciót a modellen lévő összes lyuk " +"bezárásához." -msgid "You cannot load SLA project with a multi-part object on the bed" -msgstr "" -"Nem tölthet be olyan SLA projektet, amelyben több részből álló objektum van " -"a tárgyasztalon" +msgid "Use colors for axes values in Manipulation panel" +msgstr "Használjon színeket a tengelyértékekhez a Manipuláció panelen" -msgid "" -"You cannot use non-uniform scaling mode for multiple objects/parts selection" -msgstr "" -"Nem használhat nem egységes méretezési módot több objektum/alkatrész " -"kijelölése esetén" +msgid "Use system menu for application" +msgstr "Rendszermenü használata az alkalmazáshoz" -msgid "" -"You have just added a G-code for color change, but its value is empty.\n" -"To export the G-code correctly, check the \"Color Change G-code\" in " -"\"Printer Settings > Custom G-code\"" -msgstr "" -"Nemrég hozzáadott egy G-kódot a színváltáshoz, de az értéke üres.\n" -"A G-kód helyes exportálásához jelölje be a \"G-kód színének módosítása\" " -"lehetőséget a \"Nyomtatóbeállítások > Egyéni G-kód\" részben." +msgid "Used filament" +msgstr "Felhasznált filament" + +msgid "Vertical shells" +msgstr "Függőleges héjak" + +msgid "Whole word" +msgstr "Teljes szó" + +msgid "Wipe tower parameters" +msgstr "Törlőtorony paraméterek" msgid "" -"You have selected physical printer \"%1%\" \n" -"with related printer preset \"%2%\"" +"With draft shield active, the skirt will be printed skirt_distance from the " +"object, possibly intersecting brim.\n" +"Enabled = skirt is as tall as the highest printed object.\n" +"Limited = skirt is as tall as specified by skirt_height.\n" +"This is useful to protect an ABS or ASA print from warping and detaching " +"from print bed due to wind draft." msgstr "" -"Ön a \"%1%\" fizikai nyomtatót választotta ki \n" -"a kapcsolódó \"%2%\" nyomtató-előbeállítással." +"Ha a huzatvédő aktív, akkor szoknyát az objektumtól 'szoknya_távolságra' " +"nyomtatjuk ki, esetleg a karimát metsző módon.\n" +"Engedélyezve = a szoknya olyan magas, mint a legmagasabb nyomtatott " +"objektum.\n" +"Korlátozott = a szoknya olyan magas, mint a 'szoknya_magasság' által " +"meghatározott magasság.\n" +"Ez a funkció hasznos ABS vagy ASA munkadarabok védelmére, hogy azok huzat " +"miatt ne vetemedjenek meg és ne váljanak le a nyomtatóágyról." msgid "" -"You have the following presets with saved options for \"Print Host upload\"" +"You are currently editing SLA support points. Please, apply or discard your " +"changes first." msgstr "" -"A következő előbeállítások állnak rendelkezésre a \"Nyomtató feltöltés\" " -"mentett beállításaival" - -msgid "You may need to update your graphics card driver." -msgstr "Lehet, hogy frissítenie kell a grafikus kártya illesztőprogramját." +"Jelenleg SLA támasztási pontokat szerkeszt. Kérjük, először alkalmazza vagy " +"dobja el a módosításokat." -msgid "You must install a configuration update." -msgstr "Telepítenie kell egy konfigurációs frissítést." +msgid "You are opening %1% version %2%." +msgstr "Ön a %1% %2% verzióját nyitja meg." -msgid "You should change the name of your printer device." -msgstr "Meg kell változtatnia a nyomtatója nevét." +msgid "You can keep presets modifications to the new project or discard them" +msgstr "" +"Az előbeállítások módosításait megtarthatja az új projekthez, vagy elvetheti " +"őket" -msgid "You started your selection with %s Item." -msgstr "A kiválasztást a %s elemmel kezdte." +msgid "" +"You can keep presets modifications to the new project, discard them or save " +"changes as new presets.\n" +"Note, if changes will be saved then new project wouldn't keep them" +msgstr "" +"Az előbeállítások módosításait megtarthatja az új projekthez, elvetheti " +"őket, vagy új előbeállításként elmentheti a változtatásokat.\n" +"Megjegyzés: ha a módosítások elmentésre kerülnek, akkor az új projekt nem " +"tartja meg őket" msgid "" "You will be notified about new release after startup acordingly: All = " @@ -9421,63 +15322,6 @@ msgstr "" "Az előbeállítások nem mentett módosításaira legközelebb nem kérdez rá a " "rendszer előbeállítás váltáskor" -msgid "Your current changes will delete all saved color changes." -msgstr "" -"Az aktuális módosítások törlik az összes korábban elmentett színváltást." - -msgid "Your current changes will delete all saved extruder (tool) changes." -msgstr "" -"Az aktuális módosításai törlik az összes mentett Extruder (eszköz) " -"módosítást." - -msgid "Your file was repaired." -msgstr "A fájlja javításra került." - -msgid "" -"Your object appears to be too large, so it was automatically scaled down to " -"fit your print bed." -msgstr "" -"Az objektum túl nagynak tűnik, ezért automatikusan le lett méretezve, hogy " -"illeszkedjen a tárgyasztalhoz." - -msgid "" -"Your print is very close to the priming regions. Make sure there is no " -"collision." -msgstr "" -"A nyomtatás nagyon közel van az alapozó régiókhoz. Győződjön meg róla, hogy " -"nincs ütközés." - -msgid "Z offset" -msgstr "Z ofszet" - -msgid "Zig-Zag" -msgstr "Cikk-Cakk" - -msgid "Zoom" -msgstr "Zoom" - -msgid "Zoom in" -msgstr "Zoom közelítés" - -msgid "Zoom out" -msgstr "Zoom távolítás" - -msgid "Zoom to Bed" -msgstr "Zoom a tárgyasztalra" - -msgid "" -"Zoom to selected object\n" -"or all objects in scene, if none selected" -msgstr "" -"Nagyítás a kiválasztott objektumra\n" -"vagy az összes objektumra a jelenetben, ha egy sincs kiválasztva" - -msgid "°C" -msgstr "°C" - -msgid "Fill pattern" -msgstr "Kitöltés mintázata" - msgid "" "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap " "community." @@ -9545,21 +15389,9 @@ msgstr "" "beállításokat jeleníti meg. A másik kettő fokozatosan kifinomultabb " "finomhangolást kínál, haladó, illetve szakértő felhasználók számára." -msgid "FFF Technology Printers" -msgstr "FFF Techológiájú Nyomtatók" - -msgid "SLA Technology Printers" -msgstr "SLA Techológiájú Nyomtatók" - msgid "Select all standard printers" msgstr "Az összes standard nyomtató kiválasztása" -msgid "Prusa FFF Technology Printers" -msgstr "Prusa FFF Technológiájú Nyomtatók" - -msgid "Prusa MSLA Technology Printers" -msgstr "Prusa MSLA Technológiájú Nyomtatók" - msgid "" "Performing desktop integration failed - boost::filesystem::canonical did not " "return appimage path." @@ -9837,21 +15669,6 @@ msgstr "" "nyomtató beállításaiban. \n" "A beállítások a fizikai nyomtatók beállításaiban lesznek elérhetőek." -msgid "Simple" -msgstr "Egyszerű" - -msgid "Simple View Mode" -msgstr "Egyszerű Megjelenítési Mód" - -msgid "Advanced View Mode" -msgstr "Haladó Megjelenítési Mód" - -msgid "Expert" -msgstr "Szakértő" - -msgid "Expert View Mode" -msgstr "Szakértő Megjelenítési Mód" - msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." @@ -9880,147 +15697,18 @@ msgstr "Párna és Támasztó" msgid "Extrusion Width" msgstr "Extrudálási Szélesség" -msgid "Add part" -msgstr "Alkatrész hozzáadása" - msgid "Add negative volume" msgstr "Negatív térfogat hozzáadása" -msgid "Add modifier" -msgstr "Módosító hozzáadása" - -msgid "Add support blocker" -msgstr "Támasz blokkoló hozzáadása" - -msgid "Add support enforcer" -msgstr "Támasz kényszerítő hozzáadása" - -msgid "Select showing settings" -msgstr "Válassza ki a megjelentés beállításait" - -msgid "Quick Add Settings (%s)" -msgstr "Gyors hozzáadás beállításai (%s)" - -msgid "Remove the selected object" -msgstr "A kijelölt objektum eltávolítása" - -msgid "Box" -msgstr "Doboz" - -msgid "Cylinder" -msgstr "Henger" - -msgid "Slab" -msgstr "Lemez" - msgid "Gallery" msgstr "Galéria" -msgid "Height range Modifier" -msgstr "Magasságtartomány módosító" - -msgid "Add settings" -msgstr "Beállítások hozzáadása" - -msgid "Change type" -msgstr "Típus módosítása" - -msgid "Set as a Separated Object" -msgstr "Legyen különálló objektum" - -msgid "Set as a Separated Objects" -msgstr "Legyenek különálló objektumok" - -msgid "Printable" -msgstr "Nyomtatható" - -msgid "Rename" -msgstr "Átnevezés" - -msgid "Fix through the Netfabb" -msgstr "Javítás Netfabb-bal" - -msgid "Export as STL" -msgstr "Exportálás STL-ként" - -msgid "Reload the selected volumes from disk" -msgstr "A kiválasztott térfogatok újra betöltésé a lemezről" - msgid "Replace the selected volume with new STL" msgstr "A kiválasztott térfogat cseréje új STL-lel" -msgid "Set extruder for selected items" -msgstr "Extruder beállítása a kiválasztott elemekhez" - -msgid "Scale to print volume" -msgstr "Skálázás a nyomtatási térfogathoz" - -msgid "Scale the selected object to fit the print volume" -msgstr "" -"Méretezze a kiválasztott objektumot a (maximális) nyomtatási térfogathoz" - -msgid "Merge objects to the one multipart object" -msgstr "Objektumok összevonása egy többrészes objektumba" - -msgid "Along X axis" -msgstr "X tengely mentén" - -msgid "Mirror the selected object along the X axis" -msgstr "A kijelölt objektum tükrözése az X tengely mentén" - -msgid "Along Y axis" -msgstr "Y tengely mentén" - -msgid "Mirror the selected object along the Y axis" -msgstr "A kijelölt objektum tükrözése az Y tengely mentén" - -msgid "Along Z axis" -msgstr "Z tengely mentén" - -msgid "Mirror the selected object along the Z axis" -msgstr "A kijelölt objektum tükrözése az Z tengely mentén" - -msgid "Mirror" -msgstr "Tükrözés" - -msgid "Mirror the selected object" -msgstr "A kijelölt objektum tükrözése" - -msgid "To objects" -msgstr "Objektumokra" - -msgid "Split the selected object into individual objects" -msgstr "A kijelölt objektum különálló objektumokra bontása" - -msgid "To parts" -msgstr "Alkatrészekre" - msgid "Split the selected object into individual parts" msgstr "A kijelölt objektum különálló alkatrészekre bontása" -msgid "Split the selected object" -msgstr "A kijelölt objektum felbontása" - -msgid "Add one more instance of the selected object" -msgstr "A kijelölt objektum egy újabb példányának hozzáadása" - -msgid "Remove one instance of the selected object" -msgstr "A kijelölt objektum egy példányának eltávolítása" - -msgid "Set number of instances" -msgstr "Példányok számának megadása" - -msgid "Change the number of instances of the selected object" -msgstr "A kijelölt objektum példányszámának módosítása" - -msgid "Fill bed with instances" -msgstr "Tárgyasztal kitöltése példányokkal" - -msgid "Fill the remaining area of bed with instances of the selected object" -msgstr "" -"Tárgyasztal fennmaradó területének kitöltése a kiválasztott objektum " -"példányaival" - msgid "Generic" msgstr "Általános" @@ -10142,31 +15830,6 @@ msgstr "" "A nyomtatási gazdán keresztül csatlakoztatott nyomtatókhoz való csatlakozás " "meghiúsult." -msgid "Select what kind of support do you need" -msgstr "Válassza ki, milyen támaszra van szüksége" - -msgid "For support enforcers only" -msgstr "Csak támaszték kényszerítőkre" - -msgid "Everywhere" -msgstr "Mindenhol" - -msgid "" -"This flag enables the brim that will be printed around each object on the " -"first layer." -msgstr "" -"Ez a jelölő engedélyezi a karimát, amely az első réteg minden objektuma köré " -"kerül nyomtatásra." - -msgid "Select what kind of pad do you need" -msgstr "Válassza ki, milyen párnára van szüksége" - -msgid "Below object" -msgstr "Objektum alatt" - -msgid "Around object" -msgstr "Objektum körül" - msgid "" "You will not be asked about it again, when: \n" "- Closing PrusaSlicer,\n" @@ -10286,9 +15949,6 @@ msgstr "" "Új elrendezés, a fülsáv elérése felső menüben található beállítások gombbal " "lehetséges" -msgid "Layout Options" -msgstr "Elrendezési lehetőségek" - msgid "" "If estimated layer time is below ~%1%s, fan will run at %2%%% and print " "speed will be reduced so that no less than %3%s are spent on that layer " @@ -10524,12 +16184,6 @@ msgstr "" msgid "For more information please visit our wiki page:" msgstr "További információkért kérjük, látogasson el a wiki oldalunkra:" -msgid "Switch to the %s mode" -msgstr "Váltás %s módra" - -msgid "Current mode is %s" -msgstr "Az aktuális mód %s" - msgid "Connection to AstroBox works correctly." msgstr "A kapcsolat az AstroBox-szal megfelelően működik." @@ -10713,20 +16367,6 @@ msgstr "" msgid "This fan speed is enforced during all bridges and overhangs." msgstr "Ez a ventilátorsebesség minden híd és túlnyúlás során érvényesül." -msgid "" -"This factor affects the amount of plastic for bridging. You can decrease it " -"slightly to pull the extrudates and prevent sagging, although default " -"settings are usually good and you should experiment with cooling (use a fan) " -"before tweaking this." -msgstr "" -"Ez a tényező befolyásolja az áthidaló műanyag mennyiségét. Kicsit " -"csökkentheti, hogy jobban feszítse az extrudátumot és megakadályozza a " -"megereszkedést, bár az alapbeállítások általában jók, és a hűtéssel is " -"érdemes kísérletezni (ventilátorral), mielőtt ezen módosítana." - -msgid "Speed for printing bridges." -msgstr "A hidak nyomtatási sebessége." - msgid "" "The horizontal width of the brim that will be printed around each object on " "the first layer. When raft is used, no brim is generated (use " @@ -10791,13 +16431,6 @@ msgstr "" msgid "Top fill pattern" msgstr "Felső kitöltés mintázata" -msgid "" -"Fill pattern for top infill. This only affects the top visible layer, and " -"not its adjacent solid shells." -msgstr "" -"Kitöltési minta a felső kitöltéshez. Ez csak az felső külső látható réteget " -"érinti, a szomszédos tömör héjakat nem." - msgid "Aligned Rectilinear" msgstr "Igazított Egyenes" @@ -10932,9 +16565,6 @@ msgstr "A hűtési lépések fokozatosan felgyorsulnak ettől a sebességtől ke msgid "Cooling moves are gradually accelerating towards this speed." msgstr "A hűtési lépések fokozatosan felgyorsulnak erre a sebességre." -msgid "Fill pattern for general low-density infill." -msgstr "Kitöltés mintázata általános alacsony sűrűségű kitöltéshez." - msgid "" "This is the acceleration your printer will use for first layer. Set zero to " "disable acceleration control for first layer." @@ -11258,13 +16888,6 @@ msgstr "" "érdekében. Ez a kísérleti beállítás a legnagyobb ön által megengedett " "nyomtatási sebesség beállítására szolgál." -msgid "" -"This experimental setting is used to set the maximum volumetric speed your " -"extruder supports." -msgstr "" -"Ez a kísérleti beállítás az extruder által támogatott maximális " -"térfogatsebesség beállítására szolgál." - msgid "This setting represents the minimum PWM your fan needs to work." msgstr "" "Ez a beállítás azt a minimális PWM-et (impulzusszélesség moduláció) jelenti, " @@ -11584,15 +17207,6 @@ msgstr "" "használni. Ha százalékban van megadva (például 90%), akkor a rétegmagasságra " "lesz kiszámítva." -msgid "" -"Speed for printing support material interface layers. If expressed as " -"percentage (for example 50%) it will be calculated over support material " -"speed." -msgstr "" -"Sebesség a támasztó interfész rétegeinek nyomtatásához. Ha százalékban van " -"megadva (például 50%), akkor a sebességet a támasztó nyomtatási sebességére " -"kell számítani." - msgid "Interface pattern" msgstr "Interfész mintázat" @@ -11606,9 +17220,6 @@ msgstr "" "(Rectilinear), míg az oldható támaszanyag interfész alapértelmezett " "mintázata a koncentrikus (Concentric)." -msgid "Speed for printing support material." -msgstr "Támaszanyag nyomtatásának sebessége." - msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " @@ -15854,9 +21465,6 @@ msgstr "XPM: hiányos szín meghatározás '%s'!" msgid "XPM: malformed colour definition '%s' at line %d!" msgstr "XPM: hiányos szín meghatározás '%s'!" -msgid "Yes" -msgstr "Igen" - msgid "You cannot Clear an overlay that is not inited" msgstr "Nem tud könyvtárat hozzáadni ehhez a szakaszhoz." -- cgit v1.2.3 From 699a13374a949b5bb061ee36a3424f55aab03318 Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 14:25:30 +0200 Subject: Add character ranges for lithuanian supermerill/SuperSlicer#2876 --- src/slic3r/GUI/ImGuiWrapper.cpp | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/src/slic3r/GUI/ImGuiWrapper.cpp b/src/slic3r/GUI/ImGuiWrapper.cpp index 7aeadde1e..88216dfc2 100644 --- a/src/slic3r/GUI/ImGuiWrapper.cpp +++ b/src/slic3r/GUI/ImGuiWrapper.cpp @@ -169,6 +169,17 @@ void ImGuiWrapper::set_language(const std::string &language) 0x27E8, 0x27E9, // hungarian 0, }; + static const ImWchar ranges_lithuanian[] = { + 0x0020, 0x01FF, // Basic Latin + Latin Supplement + 0x2010, 0x2011, // ranges_lithuanian https://character-table.netlify.app/lithuanian/ + 0x2013, 0x2014, // ranges_lithuanian + 0x201C, 0x201E, // ranges_lithuanian + 0x2026, 0x2026, // ranges_lithuanian + 0x2030, 0x2030, // ranges_lithuanian + 0x20AC, 0x20AC, // ranges_lithuanian + 0x2212, 0x2212, // ranges_lithuanian + 0, + }; static const ImWchar ranges_vietnamese[] = { 0x0020, 0x00FF, // Basic Latin @@ -182,7 +193,7 @@ void ImGuiWrapper::set_language(const std::string &language) 0, }; m_font_cjk = false; - if (lang == "cs" || lang == "pl" || lang == "hu") { + if (lang == "cs" || lang == "pl" || lang == "hu" || lang == "li") { ranges = ranges_latin2; } else if (lang == "ru" || lang == "uk") { ranges = ImGui::GetIO().Fonts->GetGlyphRangesCyrillic(); // Default + about 400 Cyrillic characters @@ -192,6 +203,8 @@ void ImGuiWrapper::set_language(const std::string &language) ranges = ranges_vietnamese; } else if (lang == "hu") { ranges = ranges_hungarian; + } else if (lang == "li") { + ranges = ranges_lithuanian; } else if (lang == "ja") { ranges = ImGui::GetIO().Fonts->GetGlyphRangesJapanese(); // Default + Hiragana, Katakana, Half-Width, Selection of 1946 Ideographs m_font_cjk = true; -- cgit v1.2.3 From bf33a9656def9eb91485380d7cf45ec34e7ab182 Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 14:34:36 +0200 Subject: upadted czech translation, thanks to @renemosner supermerill/SuperSlicer#2691 --- resources/localization/cs/Slic3r.po | 5912 ++++++++++++++-- resources/localization/cs/TODO.po | 9697 +++++--------------------- resources/localization/cs/cs_database.po | 10464 ++++++++++++++++++++++------- 3 files changed, 14833 insertions(+), 11240 deletions(-) diff --git a/resources/localization/cs/Slic3r.po b/resources/localization/cs/Slic3r.po index 2e3e6c5c5..a1917ba27 100644 --- a/resources/localization/cs/Slic3r.po +++ b/resources/localization/cs/Slic3r.po @@ -5,15 +5,18 @@ msgid "" msgstr "" "Project-Id-Version: Slic3r\n" -"POT-Creation-Date: 2022-04-15 00:00\n" -"PO-Revision-Date: 2022-04-15 00:00\n" -"Last-Translator:\n" +"POT-Creation-Date: 2022-07-12 00:00\n" +"PO-Revision-Date: 2022-07-12 00:00\n" +"Last-Translator: renemosner\n" "Language-Team:\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language:cs_CZ\n" +msgid "!! Can be unstable in some os distribution !!" +msgstr "!! V některých distribucích OS může být nestabilní !!" + msgid "%1$d backward edge" msgid_plural "%1$d backward edges" msgstr[0] "‪%1$d‬ zpětná hrana" @@ -109,11 +112,14 @@ msgid "%1% Preset" msgstr "%1% Přednastavení" msgid "%1% was substituted with %2%" -msgstr "%2% bylo nahrazeno hodnotou %1%" +msgstr "%1% bylo nahrazeno hodnotou %2%" msgid "%1% was successfully sliced." msgstr "%1% byl úspěšně naslicován." +msgid "%d perimeter: %.2f mm" +msgstr "%d perimetr: %.2f mm" + msgid "%d presets successfully imported." msgstr "%d přednastavení úspěšně importováno." @@ -135,21 +141,37 @@ msgstr "%s chyba" msgid "%s Family" msgstr "%s Rodina" +msgid "%s flow rate is maximized " +msgstr "%s průtok je maximalizován " + +msgid "%s GUI initialization failed" +msgstr "%s inicializace GUI selhala" + msgid "%s has a warning" msgstr "%s obsahuje varování" +msgid "" +"%s has encountered a localization error. Please report to %s team, what " +"language was active and in which scenario this issue happened. Thank you.\n" +"\n" +"The application will now terminate." +msgstr "" +"%s narazil na chybu lokalizace. Nahlaste prosím týmu %s co jazyk byl aktivní a ve " +"kterém scénáři k tomuto problému došlo. Děkuji.\n" +"\n" +"Aplikace bude nyní ukončena." + msgid "%s has encountered an error" -msgstr "Došlo k chybě v programu %s" +msgstr "%s Došlo k chybě v programu" msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" -"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. " -"Pokud jste si jisti, že máte v systému dostatek paměti RAM, může to být také " -"chyba programu a v takovém případě bychom byli rádi, kdybyste nám to " -"nahlásili." +"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. Pokud jste " +"si jisti, že máte v systému dostatek paměti RAM, může to být také chyba programu a " +"v takovém případě bychom byli rádi, kdybyste nám to nahlásili." msgid "" "%s has encountered an error. It was likely caused by running out of memory. " @@ -158,10 +180,9 @@ msgid "" "\n" "The application will now terminate." msgstr "" -"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. " -"Pokud jste si jisti, že máte v systému dostatek paměti RAM, může to být také " -"chyba programu a v takovém případě bychom byli rádi, kdybyste nám to " -"nahlásili.\n" +"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. Pokud jste " +"si jisti, že máte v systému dostatek paměti RAM, může to být také chyba programu a " +"v takovém případě bychom byli rádi, kdybyste nám to nahlásili.\n" "\n" "Aplikace se nyní ukončí." @@ -169,7 +190,7 @@ msgid "%s has no configuration updates available." msgstr "%s nemá k dispozici žádné aktualizace konfigurace." msgid "%s incompatibility" -msgstr "Není kompatibilní s %s" +msgstr "%s Není kompatibilní s" msgid "%s info" msgstr "%s info" @@ -177,6 +198,15 @@ msgstr "%s info" msgid "%s information" msgstr "%s informace" +msgid "" +"%s is not using the newest configuration available.\n" +"Configuration Wizard may not offer the latest printers, filaments and SLA " +"materials to be installed. " +msgstr "" +"%s nepoužívá nejnovější dostupnou konfiguraci.\n" +"Průvodce konfigurací nemusí nabízet nejnovější tiskárny, vlákna a SLA materiály k " +"instalaci. " + msgid "" "%s now uses an updated configuration structure.\n" "\n" @@ -192,16 +222,21 @@ msgid "" msgstr "" "%s nyní používá aktualizovanou konfigurační strukturu.\n" "\n" -"Byly uvedeny takzvaná \"Systémová přednastavení\", která obsahují výchozí " -"nastavení pro rozličné tiskárny. Tato systémová přednastavení nemohou být " -"upravena, místo toho si nyní uživatel může vytvořit svá vlastní " -"přednastavení tím, že zdědí nastavení z jednoho ze systémových " -"přednastavení.\n" -"Nově vytvořené přednastavení může buď zdědit určitou hodnotu od svého " -"předchůdce nebo ji přepsat upravenou hodnotou.\n" +"Byly uvedeny takzvaná \"Systémová přednastavení\", která obsahují výchozí nastavení " +"pro rozličné tiskárny. Tato systémová přednastavení nemohou být upravena, místo " +"toho si nyní uživatel může vytvořit svá vlastní přednastavení tím, že zdědí " +"nastavení z jednoho ze systémových přednastavení.\n" +"Nově vytvořené přednastavení může buď zdědit určitou hodnotu od svého předchůdce " +"nebo ji přepsat upravenou hodnotou.\n" "\n" -"Při nastavování nových předvoleb postupujte podle pokynů v %s a vyberte, zda " -"chcete povolit automatické přednastavené aktualizace." +"Při nastavování nových předvoleb postupujte podle pokynů v %s a vyberte, zda chcete " +"povolit automatické přednastavené aktualizace." + +msgid "%s Releases" +msgstr "%s Vydání" + +msgid "%s version" +msgstr "%s verze" msgid "%s View Mode" msgstr "%s Režim zobrazení" @@ -209,6 +244,12 @@ msgstr "%s Režim zobrazení" msgid "%s warning" msgstr "%s varování" +msgid "%s website" +msgstr "%s webová stránka" + +msgid "%s wiki" +msgstr "%s wiki" + msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" "\n" @@ -219,11 +260,24 @@ msgid "" msgstr "" "%s nyní spustí aktualizaci. Jinak nebude moci být spuštěn.\n" "\n" -"Nejprve bude vytvořen kompletní snímek konfigurace a v případě problému s " -"novou verzí lze provést obnovu.\n" +"Nejprve bude vytvořen kompletní snímek konfigurace a v případě problému s novou " +"verzí lze provést obnovu.\n" "\n" "Aktualizované balíčky konfigurace:" +msgid "" +"%s's user interfaces comes in three variants:\n" +"Simple, Advanced, and Expert.\n" +"The Simple mode shows only the most frequently used settings relevant for " +"regular 3D printing. The other two offer progressively more sophisticated " +"fine-tuning, they are suitable for advanced and expert users, respectively." +msgstr "" +"Uživatelská rozhraní %s jsou k dispozici ve třech variantách:\n" +"Jednoduché, pokročilé a expertní.\n" +"Jednoduchý režim zobrazuje pouze nejčastěji používaná nastavení relevantní pro " +"běžný 3D tisk. Další dva nabízejí postupně sofistikovanějšíjemné ladění, jsou " +"vhodné pro pokročilé a zkušené uživatele." + msgid "" "%s\n" "Do you want to continue?" @@ -232,7 +286,7 @@ msgstr "" "Chcete pokračovat?" msgid "&About %s" -msgstr "&O %su" +msgstr "&O %s" msgid "&Collapse Sidebar" msgstr "&Sbalit Postranní panel" @@ -241,7 +295,7 @@ msgid "&Configuration" msgstr "&Konfigurace" msgid "&Configuration Snapshots" -msgstr "Zálohy konfigura&ce" +msgstr "&Zálohy konfigurace" msgid "&Copy" msgstr "&Kopírovat" @@ -256,7 +310,7 @@ msgid "&Export" msgstr "&Exportovat" msgid "&Filament Settings Tab" -msgstr "Panel Nastavení &filamentu" +msgstr "&Panel Nastavení Filamentu" msgid "&File" msgstr "&Soubor" @@ -270,6 +324,9 @@ msgstr "&Fullscreen" msgid "&G-code Preview" msgstr "&G-code Prohlížeč" +msgid "&Generate" +msgstr "&Generovat" + msgid "&Help" msgstr "&Pomoc" @@ -283,7 +340,7 @@ msgid "&New Project" msgstr "&Nový projekt" msgid "&Next >" -msgstr "&Další>" +msgstr "&Další >" msgid "&Open G-code" msgstr "&Otevřít G-code" @@ -292,19 +349,19 @@ msgid "&Open Project" msgstr "&Otevřít projekt" msgid "&Paste" -msgstr "Vloži&t" +msgstr "&Vložit" msgid "&Preferences" -msgstr "Nas&tavení" +msgstr "&Nastavení" msgid "&Quit" -msgstr "Ukonči&t" +msgstr "&Ukončit" msgid "&Redo" msgstr "&Vpřed" msgid "&Repair STL file" -msgstr "Op&ravit soubor STL" +msgstr "&Opravit soubor STL" msgid "&Save Project" msgstr "&Uložit projekt" @@ -321,9 +378,29 @@ msgstr "&Zobrazení" msgid "&Window" msgstr "&Okno" +msgid "'As bridge' flow threshold" +msgstr "Práh průtoku Jako most" + +msgid "'As bridge' speed threshold" +msgstr "Práh rychlosti Jako most" + msgid "(All)" msgstr "(Všechny)" +msgid "" +"(even if the acceleration is set to 3000 in the print profile, if this is at " +"1500, it won't export a gcode that will tell to go over 1500)." +msgstr "" +"(i když je zrychlení nastaveno na 3000 v profilu tisku, pokud je to na 1500, " +"nevyexportuje gcode, který řekne, že má jít přes 1500)." + +msgid "" +"(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)" +msgstr "(rychlost však nebude nikdy snížena pod %1%mm/s nebo až o %2%%% snížení)" + +msgid "(however, speed will never be reduced below %1%mm/s)" +msgstr "(rychlost však nebude nikdy snížena pod %1%mm/s)" + msgid "(including spool)" msgstr "(včetně cívky)" @@ -351,15 +428,21 @@ msgstr "0 (žádné otevřené kotvy)" msgid "0 (off)" msgstr "0 (vypnuto)" +msgid "0 (Simple connect)" +msgstr "0 (Jednoduché připojení)" + msgid "1 (light)" msgstr "1 (slabé)" msgid "1000 (unlimited)" -msgstr "1 000 (neomezeně)" +msgstr "1000 (neomezeně)" msgid "2 (default)" msgstr "2 (výchozí)" +msgid "2x10°" +msgstr "2x10°" + msgid "3 (heavy)" msgstr "3 (silné)" @@ -370,14 +453,42 @@ msgid "3D Honeycomb" msgstr "3D Plástev" msgid "3D Mouse disconnected." -msgstr "3D myš odpojena." +msgstr "3D Myš odpojena." + +msgid "3D view" +msgstr "3D Pohled" msgid "3Dconnexion settings" -msgstr "Nastavení 3DConnexion" +msgstr "Nastavení 3D Připojení" + +msgid "3x10°" +msgstr "3x10°" + +msgid "3x5°" +msgstr "3x5°" + +msgid "4x10°" +msgstr "4x10°" + +msgid "5x5°" +msgstr "5x5°" msgid "< &Back" msgstr "<&Zpět" +msgid "" +"[Deprecated] Prefer using max_gcode_per_second instead, as it's much better " +"when you have very different speeds for features.\n" +"Too many too small commands may overload the firmware / connection. Put a " +"higher value here if you see strange slowdown.\n" +"Set zero to disable." +msgstr "" +"[Zastaralé] Raději místo toho použijte max_gcode_per_second, protože je to mnohem " +"lepší když máte velmi rozdílné rychlosti pro funkce.\n" +"Příliš mnoho příliš malých příkazů může přetížit firmware / připojení. Vložte zde " +"vyšší hodnota, pokud uvidíte podivné zpomalení.\n" +"Nastavit nulu pro zakázání." + msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" @@ -399,23 +510,43 @@ msgstr "" "V kódu layer_gcode byl nalezen kód \"G92 E0\", který není kompatibilní s " "absolutním adresováním extruderu." +msgid "" +"\n" +"\n" +"If estimated layer time is below ~%1%s" +msgstr "" +"\n" +"\n" +"Pokud je odhadovaný čas vrstvy pod ~%1%s" + +msgid "" +"\n" +"\n" +"If estimated layer time is below ~%1%s, but still greater than ~%2%s, fan " +"will run at a proportionally increasing speed between %3%%% and %4%%%" +msgstr "" +"\n" +"\n" +"Pokud je odhadovaná doba vrstvy nižší než ~%1%s, ale stále větší než ~%2%s, " +"ventilátor poběží úměrně rostoucí rychlostí mezi %3%%% a %4%%%" + msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" -"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. " -"Pokud je tento logický výraz pravdivý, potom je tento profil považován za " -"kompatibilní s aktivním profilem tiskárny." +"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. Pokud " +"je tento logický výraz pravdivý, potom je tento profil považován za kompatibilní s " +"aktivním profilem tiskárny." msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" -"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. " -"Pokud je tento logický výraz pravdivý, potom je tento profil považován za " -"kompatibilní s aktivním profilem tiskárny." +"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. Pokud " +"je tento logický výraz pravdivý, potom je tento profil považován za kompatibilní s " +"aktivním profilem tiskárny." msgid "" "A copy of the current system preset will be created, which will be detached " @@ -449,8 +580,8 @@ msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" -"Obecným pravidlem je 60 °C pro PLA a 110 °C pro ABS. Zadejte nula, pokud " -"nemáte vyhřívanou podložku." +"Obecným pravidlem je 60 °C pro PLA a 110 °C pro ABS. Zadejte nula, pokud nemáte " +"vyhřívanou podložku." msgid "" "A slower printing profile might be necessary when using materials with " @@ -473,12 +604,21 @@ msgstr "O %s" msgid "above" msgstr "nad" +msgid "Above bridge flow ratio" +msgstr "Poměr průtoku nad mostem" + +msgid "Above the bridges" +msgstr "Nad mosty" + msgid "Above Z" msgstr "Nad Z" msgid "Acceleration control (advanced)" msgstr "Kontrola akcelerací (pokročilé)" +msgid "Access via settings button in the top menu" +msgstr "Přístup přes tlačítko nastavení v horní nabídce" + msgid "Access violation" msgstr "Porušení přístupu" @@ -510,7 +650,19 @@ msgid "Add" msgstr "Přidat" msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" -msgstr "Přidat \"%1%\" jako další přednasatevení pro fyzickou tikárnu \"%2%\"" +msgstr "Přidat \"%1%\" jako další přednastavení pro fyzickou tiskárnu \"%2%\"" + +msgid "" +"Add a M106 S255 (max speed for fan) for this amount of seconds before going " +"down to the desired speed to kick-start the cooling fan.\n" +"This value is used for a 0->100% speedup, it will go down if the delta is " +"lower.\n" +"Set to 0 to deactivate." +msgstr "" +"Přidejte M106 S255 (Max rychlost pro ventilátor) na toto množství sekund, než " +"odejdete snížit na požadovanou rychlost, aby se nastartoval chladicí ventilátor.\n" +"Tato hodnota se používá pro zrychlení 0->100% sníží se, pokud je delta nižší.\n" +"Nastavte na 0 pro deaktivaci." msgid "Add a pad underneath the supported model" msgstr "Pod podepíraný model přidá podložku" @@ -541,8 +693,8 @@ msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" -"Přidat změnu barvy - Levé tlačítko myši pro předdefinovanou barvu, nebo " -"Shift + Levé tlačítko myši pro výběr vlastní barvy" +"Přidat změnu barvy - Levé tlačítko myši pro předdefinovanou barvu, nebo Shift + " +"Levé tlačítko myši pro výběr vlastní barvy" msgid "Add color change marker for current layer" msgstr "Přidat značku změny barvy pro aktuální vrstvu" @@ -583,6 +735,38 @@ msgstr "Přidat rozsah vrstev" msgid "Add Layers" msgstr "Přidat Vrstvy" +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters until all overhangs are filled.\n" +"!! this is a very slow algorithm !!\n" +"If you use this setting, strongly consider also using overhangs_reverse." +msgstr "" +"V případě potřeby přidejte další Perimetry, abyste se vyhnuli mezerám ve šikmých " +"stěnách. Slic3r stále přidává Perimetry, dokud nejsou vyplněny všechny převisy.\n" +"!! toto je velmi pomalý algoritmus!!\n" +"Pokud použijete toto nastavení, rozhodně zvažte použití obráceného převisu." + +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported.\n" +"If you succeed in triggering the algorithm behind this setting, please send " +"me a message. Personally, I think it's useless." +msgstr "" +"V případě potřeby přidejte další Perimetry, abyste se vyhnuli mezerám ve šikmých " +"stěnách. Slic3r stále přidává Perimetry, dokud není více než 70 % smyčky " +"bezprostředně najde podporováno.\n" +"Pokud se vám podaří spustit algoritmus za tímto nastavením, pošlete prosím Mně " +"zprávu. Osobně si myslím, že je to zbytečné." + +msgid "" +"Add one perimeter every odd layer. With this, infill is taken into the " +"sandwich and you may be able to reduce drastically the infill/perimeter " +"overlap setting. " +msgstr "" +"Každé liché vrstvě přidejte jeden Perimetr. Tím se výplň převezme do sendvič a " +"možná budete schopni drasticky zmenšit výplň/Perimetr nastavení překrytí. " + msgid "Add pause print" msgstr "Přidat pozastavení tisku" @@ -614,7 +798,7 @@ msgid "Add Settings for Object" msgstr "Přidání nastavení pro Objekty" msgid "Add Settings for Sub-object" -msgstr "Přidání nastavení pro Dílčí objeky" +msgstr "Přidání nastavení pro Dílčí objekt" msgid "Add Shape" msgstr "Přidat Tvar" @@ -625,6 +809,15 @@ msgstr "Přidání tvaru z galerie" msgid "Add Shapes from Gallery" msgstr "Přidat tvary z galerie" +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers).\n" +"!! solid_over_perimeters may erase these surfaces !!" +msgstr "" +"Přidejte plnou výplň blízko šikmých ploch, abyste zaručili vertikální " +"skořepinutloušťka (horní + spodní plné vrstvy).\n" +"!! solid_over_perimeters mohou tyto povrchy vymazat!!" + msgid "Add support point" msgstr "Přidání podpěrného bodu" @@ -634,14 +827,25 @@ msgstr "Přidání podpěr" msgid "Add supports by angle" msgstr "Přidat podpěry dle úhlu" +msgid "" +"Add this angle each layer to the base angle for infill. May be useful for " +"art, or to be sure to hit every object's feature even with very low infill. " +"Still experimental, tell me what makes it useful, or the problems that arise " +"using it." +msgstr "" +"Přidejte tento úhel každé vrstvy k základnímu úhlu pro výplň. Může být užitečné pro " +"umění, nebo abyste měli jistotu, že zasáhnete rysy každého objektu i s velmi nízkou " +"výplní.Stále experimentální, řekněte mi, v čem je užitečný nebo jaké problémy se " +"objevujípoužívat to." + msgid "Add..." msgstr "Přidat..." msgid "Add/Remove filaments" -msgstr "Přidání / Odebrání filamentů" +msgstr "Přidání/Odebrání filamentů" msgid "Add/Remove materials" -msgstr "Přidání / Odebrání materiálů" +msgstr "Přidání/Odebrání materiálů" msgid "Add/Remove presets" msgstr "Přidat/Odebrat přednastavení" @@ -658,20 +862,25 @@ msgstr "Další nastavení" msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." -msgstr "" -"Dále je před nainstalováním aktualizace vytvořena záloha veškerého nastavení." +msgstr "Dále je před nainstalováním aktualizace vytvořena záloha veškerého nastavení." msgid "Address" msgstr "Adresa" msgid "Advanced" -msgstr "Pokročilý" +msgstr "Pokročilé" + +msgid "Advanced Infill options" +msgstr "Pokročilé možnosti výplně" msgid "Advanced mode" msgstr "Pokročilý režim" +msgid "Advanced wipe tower purge volume calculs" +msgstr "Pokročilý výpočet objemu čištění stírací věže" + msgid "Advanced: Output log" -msgstr "Pokročilý:  Výstupní log" +msgstr "Pokročilý: Výstupní log" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -680,14 +889,33 @@ msgid "" "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Po výměně nástroje nemusí být známa přesná poloha nově zavedeného filamentu " -"uvnitř trysky a tlak filamentu pravděpodobně ještě není stabilní. Před " -"vyčištěním tiskové hlavy do výplně nebo do objektu bude Slic3r toto množství " -"materiálu vždy vytlačovat do čistící věže, aby se spolehlivě vytvořily " -"následné výplně nebo objekty." +"Po výměně nástroje nemusí být známa přesná poloha nově zavedeného filamentu uvnitř " +"trysky a tlak filamentu pravděpodobně ještě není stabilní. Před vyčištěním tiskové " +"hlavy do výplně nebo do objektu bude Slic3r toto množství materiálu vždy vytlačovat " +"do čistící věže, aby se spolehlivě vytvořily následné výplně nebo objekty." + +msgid "after last perimeter" +msgstr "Po posledním perimetru" msgid "After layer change G-code" -msgstr "G-code po změně vrstvy" +msgstr "G-Code po změně vrstvy" + +msgid "Algorithm" +msgstr "Algoritmus" + +msgid "" +"Algorithm for the advanced wipe.\n" +"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" +"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " +"volume_mult * (pigmentBefore-pigmentAfter)^3\n" +"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / " +"(0.5+pigmentAfter)" +msgstr "" +"Algoritmus pro pokročilé vymazání.\n" +"Lineární: objem = tryska + objem mult * (pigment Před pigmentem Po)\n" +"Quadratic: objem = tryska + objem mult * (pigment Před pigmentem Po)+volume mult * " +"(pigment Before pigment After)^3\n" +"Hyperbola: objem = tryska + objem mult * (0,5 + pigment předtím) / (0,5+pigment po)" msgid "Align the model to the given point." msgstr "Zarovnejte model s daným bodem." @@ -701,9 +929,26 @@ msgstr "Zarovnaný" msgid "All" msgstr "Všechny" -msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" +msgid "" +"All characters that are written here will be replaced by '_' when writing " +"the gcode file name.\n" +"If the first charater is '[' or '(', then this field will be considered as a " +"regexp (enter '[^a-zA-Z0-9]' to only use ascii char)." msgstr "" -"Všechna gizma: Rotace - levé talčítko myši; Posun - pravé tlačítko myši" +"Všechny znaky, které jsou zde napsány, budou při psaní nahrazeny '_'název souboru " +"gcode.\n" +"Pokud je první znak '[' nebo '(', bude toto pole považováno za regexp (zadejte '[^a-" +"zA-Z0-9]', chcete-li použít pouze ascii znak)." + +msgid "" +"All gaps, between the last perimeter and the infill, which are thinner than " +"a perimeter will be filled by gapfill." +msgstr "" +"Všechny mezery mezi posledním perimetrem a výplní, které jsou tenčí než perimetr " +"bude vyplněn mezerou." + +msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" +msgstr "Všechna gizma: Rotace - levé tlačítko myši; Posun - pravé tlačítko myši" msgid "All installed printers are compatible with the selected %1%." msgstr "Všechny instalované tiskárny jsou kompatibilní s vybraným %1%." @@ -741,12 +986,52 @@ msgstr "Všechny stěny" msgid "allocation failed" msgstr "alokace selhala" +msgid "Allow empty layers" +msgstr "Povolit prázdné vrstvy" + +msgid "Allow fan delay on overhangs" +msgstr "Povolit zpoždění ventilátoru na převisech" + +msgid "Allow just a single %1% instance" +msgstr "Povolit pouze jednu %1% instanci" + msgid "Allow next color repetition" msgstr "Povolit další opakování barvy" +msgid "Allow only one skirt loop" +msgstr "Povolit pouze jednu smyčku sukně" + +msgid "" +"Allow Slic3r to compute the purge volume via smart computations. Use the " +"pigment% of each filament and following parameters" +msgstr "" +"Umožněte Slic3r vypočítat objem čištění pomocí inteligentních výpočtů. Použijte " +"pigment% z každého vlákna a následující parametry" + +msgid "" +"Allow the external perimeter to merge the thin walls in the path. You can " +"deactivate this if you are using thin walls as a custom support, to reduce " +"adhesion a little." +msgstr "" +"Umožněte vnějšímu perimetru spojit tenké stěny v cestě. Můžete deaktivujte, pokud " +"používáte tenké stěny jako vlastní podporu, abyste snížili trochu adheze." + +msgid "" +"Allow to create a brim over an island when it's inside a hole (or surrounded " +"by an object)." +msgstr "" +"Umožněte vytvořit okraj nad ostrůvkem, když je uvnitř díry (nebo je obklopen " +"předmětem)." + msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "Umožňuje malovat pouze na fasety vybrané pomocí: \"%1%\"" +msgid "Also emit limits to G-code" +msgstr "Vysílat také limity pro G-kód" + +msgid "Also for all perimeters" +msgstr "Také pro všechny perimetry" + msgid "Alt + Mouse wheel" msgstr "Alt + kolečko myši" @@ -764,6 +1049,9 @@ msgstr "" "Při výběru nového přednastavení nebo resetování přednastavení se vždy " "dotazovat na neuložené změny přednastavení" +msgid "Amount of lift for travel." +msgstr "Množství zdvihu pro cestování." + msgid "" "An existing configuration was found in %3%\n" "created by %1% %2%.\n" @@ -792,6 +1080,21 @@ msgstr "" "Byl detekován objekt mimo tiskovou oblast.\n" "Pro pokračování ve slicování vyřešte tento problém." +msgid "Anchor solid infill by X mm" +msgstr "Plná výplň kotvy o X mm" + +msgid "Anchored" +msgstr "Ukotvený" + +msgid " and will gradually speed-up to the above speeds over %1% layers" +msgstr " a postupně se zrychlí na výše uvedené rychlosti přes %1% vrstev" + +msgid "Angle" +msgstr "Úhel" + +msgid "Angle cost" +msgstr "Cena úhlu" + msgid "Another export job is currently running." msgstr "V současné době běží jiná úloha exportu." @@ -801,8 +1104,7 @@ msgstr "Šipky" msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" -"Jakékoliv úpravy by měly být uloženy jako nové přednastavení zděděná z " -"tohoto." +"Jakékoliv úpravy by měly být uloženy jako nové přednastavení zděděná z tohoto." msgid "API key" msgstr "API klíč" @@ -810,6 +1112,9 @@ msgstr "API klíč" msgid "API Key / Password" msgstr "API klíč / Heslo" +msgid "Appearance" +msgstr "Vzhled" + msgid "Application preferences" msgstr "Nastavení aplikace" @@ -822,6 +1127,9 @@ msgstr "Aplikovat změny" msgid "Apply color change automatically" msgstr "Automaticky aplikovat změnu barvy" +msgid "Apply on" +msgstr "Použít na" + msgid "Apply to all the remaining small objects being loaded." msgstr "Použít na všechny zbývající malé načítané objekty." @@ -850,8 +1158,7 @@ msgstr "Opravdu chcete pokračovat?" msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" -msgstr "" -"Opravdu chcete odstranit přednastavení \"%1%\" z fyzické tiskárny \"%2%\"?" +msgstr "Opravdu chcete odstranit přednastavení \"%1%\" z fyzické tiskárny \"%2%\"?" msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "Opravdu chcete odstranit tiskárnu \"%1%\"?" @@ -862,6 +1169,9 @@ msgstr "Jste si jisti, že chcete odstranit všechna nahrazení?" msgid "Are you sure you want to do it?" msgstr "Opravdu to chcete udělat?" +msgid "Are you sure?" +msgstr "Jsi si jistý?" + msgid "Area fill" msgstr "Zaplněná plocha" @@ -878,8 +1188,8 @@ msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" -"Uspořádejte modely na tiskovou podložku a slučte je do jednoho modelu, " -"abyste s nimi mohli provádět akce jednou." +"Uspořádejte modely na tiskovou podložku a slučte je do jednoho modelu, abyste s " +"nimi mohli provádět akce jednou." msgid "" "Arrangement ignored the following objects which can't fit into a single " @@ -911,6 +1221,9 @@ msgstr "Šipka vpravo" msgid "Arrow Up" msgstr "Šipka nahoru" +msgid "Artwork model by" +msgstr "Umělecký model od" + msgid "Ask for unsaved changes in presets when creating new project" msgstr "" "Dotázat se na neuložené změny v přednastavení při vytváření nového projektu" @@ -928,6 +1241,30 @@ msgstr "" "Dotazovat se na uložení neuložených změn v přednastavení při zavírání " "aplikace nebo při načítání nového projektu" +msgid "Associate .3mf files to %1%" +msgstr "Přidružit soubory .3mf k %1%" + +msgid "Associate .gcode files to %1%" +msgstr "Přidružit soubory .gcode k %1%" + +msgid "Associate .stl files to %1%" +msgstr "Přidružit soubory .stl k %1%" + +msgid "at %1%%% over all bridges" +msgstr "na %1%%% přes všechny mosty" + +msgid "at %1%%% over bridges" +msgstr "na %1%%% přes mosty" + +msgid "at %1%%% over external perimeters" +msgstr "na %1%%% přes vnější perimetry" + +msgid "at %1%%% over infill bridges" +msgstr "při %1%%% přes výplňové můstky" + +msgid "at %1%%% over top fill surfaces" +msgstr "na %1%%% nad horními výplňovými plochami" + msgid "Attention!" msgstr "Pozor!" @@ -950,6 +1287,12 @@ msgstr[1] "%1$d automaticky opravené chyby" msgstr[2] "%1$d automaticky opravené chyby" msgstr[3] "%1$d automaticky opravených chyb" +msgid "Auto-wipe algorithm" +msgstr "Algoritmus automatického mazání" + +msgid "Auto-wipe multiplier" +msgstr "Násobitel automatického vymazání" + msgid "Autodetected" msgstr "Automaticky detekováno" @@ -959,15 +1302,30 @@ msgstr "Automatické generování podpěrných bodů" msgid "Autogeneration will erase all manually edited points." msgstr "Automatické generování vymaže všechny ručně vytvořené body." +msgid "Automatic" +msgstr "Automatický" + msgid "Automatic generation" msgstr "Automatické generování" msgid "Automatic updates" msgstr "Automatické aktualizace" +msgid "Automatic, only for small areas" +msgstr "Automaticky, pouze pro malé oblasti" + +msgid "Automatic, or anchored if too big" +msgstr "Automatické nebo ukotvené, pokud je příliš velké" + +msgid "Automatic, unless full" +msgstr "Automatické nebo ukotvené, pokud je příliš velké" + msgid "Automatically repair an STL file" msgstr "Automaticky opravit STL soubor" +msgid "Automation" +msgstr "Automatizace" + msgid "Autospeed (advanced)" msgstr "Automatická rychlost (pokročilé)" @@ -975,7 +1333,7 @@ msgid "Avoid crossing perimeters" msgstr "Vyhnout se přejíždění perimetrů" msgid "Avoid crossing perimeters - Max detour length" -msgstr "Vyhnout se přejíždění perimetrů - maximální délka objízdné cesty" +msgstr "Vyhnout se přejíždění perimetrů - Max délka objízdné cesty" msgid "BACK ARROW" msgstr "ŠIPKA ZPĚT" @@ -988,16 +1346,16 @@ msgid "" msgstr "" "Ikona ŠIPKY ZPĚT indikuje, že došlo ke změně nastavení, které není shodné s " "naposledy uloženým přednastavením pro aktuální skupinu nastavení.\n" -"Klikněte pro reset všech nastavení pro aktuální skupinu nastavení na " -"naposledy uložené přednastavení." +"Klikněte pro reset všech nastavení pro aktuální skupinu nastavení na naposledy " +"uložené přednastavení." msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" -"Ikona ŠIPKY ZPĚT indikuje, že se hodnota změnila a není shodná s naposledy " -"uloženým přednastavením.\n" +"Ikona ŠIPKY ZPĚT indikuje, že se hodnota změnila a není shodná s naposledy uloženým " +"přednastavením.\n" "Klikněte pro reset současné hodnoty na naposledy uložené přednastavení." msgid "Background processing" @@ -1009,6 +1367,9 @@ msgstr "Záchrana při neznámých hodnotách konfigurace" msgid "Balanced" msgstr "Vyvážené" +msgid "Base Layer height" +msgstr "Výška vrstvy" + msgid "Bed" msgstr "Tisková podložka" @@ -1018,6 +1379,9 @@ msgstr "Vlastní model podložky" msgid "Bed custom texture" msgstr "Vlastní textura podložky" +msgid "Bed on thumbnail" +msgstr "Postel na miniatuře" + msgid "Bed Shape" msgstr "Tvar tiskové podložky" @@ -1030,26 +1394,57 @@ msgstr "Tvar a rozměr podložky" msgid "Bed temperature" msgstr "Teplota tiskové podložky" +msgid "" +"Bed temperature for layers after the first one. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Teplota lože pro vrstvy po první. Nastavte nulu pro deaktivaci lůžka příkazy řízení " +"teploty na výstupu." + msgid "Bed Temperature:" msgstr "Teplota tiskové podložky:" +msgid "Bed/Extruder leveling" +msgstr "Vyrovnání lůžka/extrudéru" + msgid "Before layer change G-code" -msgstr "G-code před změnou vrstvy" +msgstr "G-Code před změnou vrstvy" msgid "Before roll back" msgstr "Před vrácením zpět" +msgid "Behavior" +msgstr "Chování" + msgid "Below Z" msgstr "Pod Z" msgid "Best surface quality" msgstr "Nejlepší kvalita povrchu" +msgid "Better bonding" +msgstr "Lepší spojení" + +msgid "between %1%%% %2%%% over bridges" +msgstr "mezi %1%%% %2%%% přes mosty" + +msgid "between %1%%% %2%%% over external perimeters" +msgstr "mezi %1%%% %2%%% přes vnější perimetry" + +msgid "between %1%%% %2%%% over infill bridges" +msgstr "mezi %1%%% %2%%% přes výplňové můstky" + +msgid "Between extrusion role change G-code" +msgstr "Mezi změnou role G-kódu vytlačování" + msgid "Between objects G-code" -msgstr "G-code mezi objekty" +msgstr "G-Code mezi objekty" msgid "Between objects G-code (for sequential printing)" -msgstr "G-code mezi objekty (pro sekvenční tisk)" +msgstr "G-Code mezi objekty (pro sekvenční tisk)" + +msgid "Big" +msgstr "Velký" msgid "Block seam" msgstr "Blokace švu" @@ -1067,7 +1462,7 @@ msgid "Bottle weight" msgstr "Hmotnost láhve" msgid "Bottom" -msgstr "Zespod" +msgstr "Spodní" msgid "Bottom fill pattern" msgstr "Vzor spodní výplně" @@ -1088,7 +1483,19 @@ msgid "Bottom View" msgstr "Pohled zespod" msgid "Bridge" -msgstr "Most" +msgstr "Mosty" + +msgid "Bridge acceleration" +msgstr "Zrychlení mostu" + +msgid "Bridge calibration" +msgstr "Kalibrace mostu" + +msgid "Bridge flow" +msgstr "Průtok mostu" + +msgid "Bridge flow calibration" +msgstr "Kalibrace průtoku mostu" msgid "Bridge flow ratio" msgstr "Poměr průtoku při vytváření mostů" @@ -1096,12 +1503,30 @@ msgstr "Poměr průtoku při vytváření mostů" msgid "Bridge infill" msgstr "Výplň mostů" +msgid "Bridge lines density" +msgstr "Hustota mostových čar" + +msgid "Bridge margin" +msgstr "Okraj mostu" + +msgid "Bridge speed" +msgstr "Rychlost mostu" + +msgid "Bridge speed and fan" +msgstr "Rychlost mostu a ventilátoru" + +msgid "Bridged" +msgstr "Přemostěný" + msgid "Bridges" msgstr "Mosty" msgid "Bridges fan speed" msgstr "Rychlost ventilátoru při vytváření mostů" +msgid "Bridging" +msgstr "Přemostění" + msgid "Bridging angle" msgstr "Úhel vytváření mostů" @@ -1110,16 +1535,31 @@ msgid "" "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" -"Přepsání úhlu vytváření mostů. Nastavením hodnoty na nulu se bude úhel " -"vytváření mostů vypočítávat automaticky. Při zadání jiného úhlu bude pro " -"všechny mosty použitý zadaný úhel. Pro nulový úhel zadejte 180°." +"Přepsání úhlu vytváření mostů. Nastavením hodnoty na nulu se bude úhel vytváření " +"mostů vypočítávat automaticky. Při zadání jiného úhlu bude pro všechny mosty " +"použitý zadaný úhel. Pro nulový úhel zadejte 180°." msgid "Bridging volumetric" -msgstr "Volumetrická hodnota mostů" +msgstr "Objemová hodnota mostů" msgid "Brim" msgstr "Límec" +msgid "Brim configuration" +msgstr "Konfigurace límce" + +msgid "Brim ear detection length" +msgstr "Délka detekce límcového ucha" + +msgid "Brim ear max angle" +msgstr "Max úhel okraje ucha" + +msgid "Brim ears" +msgstr "Límec" + +msgid "Brim inside holes" +msgstr "Límec vnitřních otvorů" + msgid "Brim separation gap" msgstr "Odsazení límce" @@ -1144,6 +1584,14 @@ msgstr "Velikost štětce" msgid "buffer too small" msgstr "buffer je příliš malý" +msgid "" +"But since this version of %s we don't show this information in Printer " +"Settings anymore.\n" +"Settings will be available in physical printers settings." +msgstr "" +"Ale od této verze %s tyto informace v tiskárně nezobrazujemeUž nastavení.\n" +"Nastavení bude k dispozici v nastavení fyzických tiskáren." + msgid "Buttons And Text Colors Description" msgstr "Barvy pro textové popisky a tlačítka" @@ -1152,16 +1600,38 @@ msgid "" "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" -"Ve výchozím stavu budou při vytváření nové tiskárny pojmenovány jako " -"„Printer N“.\n" +"Ve výchozím stavu budou při vytváření nové tiskárny pojmenovány jako \"Printer N\".\n" "Poznámka: Tento název lze později změnit v nastavení fyzických tiskáren" +msgid "" +"by the print profile maximum volumetric rate of %3.2f mm³/s at filament " +"speed %3.2f mm/s." +msgstr "" +"podle tiskového profilu maximální objemová rychlost %3.2f mm³/s na filamentu " +"rychlost %3.2f mm/s." + +msgid "C&alibration" +msgstr "Kalibrace" + +msgid "Calibration cube" +msgstr "Kalibrační kostka" + msgid "Camera" msgstr "Kamera" msgid "Camera view" msgstr "Pohled kamery" +msgid "" +"Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily " +"needed" +msgstr "" +"Může být užitečné, aby se zabránilo tomu, že ozubená kola bondtech deformují horké " +"hroty, ale ne běžněpotřeboval" + +msgid "Can't process the repetier return message: missing field '%s'" +msgstr "Nelze zpracovat opakovanou návratovou zprávu: chybí pole '%s'" + msgid "Cancel" msgstr "Zrušit" @@ -1185,8 +1655,7 @@ msgstr "Ukončování..." msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." -msgstr "" -"Nelze vypočítat šířku extrudování pro %1%: Proměnná \"%2%\" není dostupná." +msgstr "Nelze vypočítat šířku extrudování pro %1%: Proměnná \"%2%\" není dostupná." msgid "" "Cannot insert a new layer range after the current layer range.\n" @@ -1248,6 +1717,21 @@ msgstr "Vycentrujte tisk kolem daného středu." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "Soubory s certifikátem (*.crt, *.pem)|*.crt;*.pem|Všechny soubory|*.*" +msgid "Chamber" +msgstr "Komora" + +msgid "Chamber temperature" +msgstr "Teplota v komoře" + +msgid "" +"Chamber temperature. Note that this setting doesn't do anything, but you can " +"access it in Start G-code, Tool change G-code and the other ones, like for " +"other temperature settings." +msgstr "" +"Teplota v komoře. Všimněte si, že toto nastavení nic nedělá, ale můžete přistupte k " +"němu v kódu Start G-code, Tool Change G-code a dalších, jako pro jiná nastavení " +"teploty." + msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "Změnit \"%1%\" na\"%2%\" pro tuto fyzickou tiskárnu \"%3%\"" @@ -1301,19 +1785,26 @@ msgstr "Zkontrolujte aktualizace konfigurace" msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" -"Vyberte soubor, ze kterého chcete importovat texturu pro tiskovou podložku " -"(PNG/SVG):" +"Vyberte soubor, ze kterého chcete importovat texturu pro tiskovou podložku (PNG/" +"SVG):" msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "Zvolit soubor ke slicování (STL/OBJ/AMF/3MF/PRUSA):" msgid "Choose an STL file to import bed model from:" -msgstr "" -"Vyberte STL soubor, ze kterého chcete importovat model tiskové podložky:" +msgstr "Vyberte STL soubor, ze kterého chcete importovat model tiskové podložky:" msgid "Choose an STL file to import bed shape from:" -msgstr "" -"Vyberte STL soubor, ze kterého chcete importovat tvar tiskové podložky:" +msgstr "Vyberte STL soubor, ze kterého chcete importovat tvar tiskové podložky:" + +msgid "Choose how many digits after the dot for extruder moves." +msgstr "Vyberte, kolik číslic za tečkou pro extruder se pohybuje." + +msgid "Choose how many digits after the dot for xyz coordinates." +msgstr "Vyberte, kolik číslic za tečkou pro souřadnice xyz." + +msgid "Choose how the windows are selectable and displayed:" +msgstr "Vyberte způsob výběru a zobrazení oken:" msgid "Choose one file (3MF/AMF):" msgstr "Vyberte jeden soubor (3MF/AMF):" @@ -1321,15 +1812,37 @@ msgstr "Vyberte jeden soubor (3MF/AMF):" msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "Vyberte jeden soubor (GCODE/.GCO/.G/.ngc/NGC):" +msgid "Choose one file (py):" +msgstr "Vyberte jeden soubor (py):" + msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "Vyberte jeden nebo více souborů (STL/OBJ/AMF/3MF/PRUSA):" msgid "Choose SLA archive:" msgstr "Vyberte SLA archiv:" +msgid "Choose the image to use as splashscreen" +msgstr "Vyberte obrázek, který chcete použít jako úvodní obrazovku" + msgid "Choose the type of firmware used by your printer." msgstr "Vyberte typ firmware používaný vaší tiskárnou." +msgid "" +"Choose the way the dense layer is laid out. The automatic option lets it try " +"to draw the smallest surface with only strait lines inside the sparse " +"infill. The Anchored option just slightly enlarges (by 'Default infill " +"margin') the surfaces that need a better support." +msgstr "" +"Vyberte způsob rozložení husté vrstvy. Automatická možnost to nechá zkusitnakreslit " +"nejmenší povrch pouze s úžinami uvnitř řídkéhoinfill. Možnost Ukotvená se jen mírně " +"zvětší (podle 'Výchozí výplň margin) povrchy, které potřebují lepší podporu." + +msgid "Chrono" +msgstr "Chrono" + +msgid "Chronology" +msgstr "Chronologie" + msgid "Circle" msgstr "Kruh" @@ -1352,8 +1865,7 @@ msgid "Click right mouse button to show arrangement options" msgstr "Kliknutím pravým tlačítkem myši zobrazíte možnosti uspořádání" msgid "Click the icon to change the object printable property" -msgstr "" -"Klepnutím na ikonu změníte příznak objektu, zda se bude tisknout či nikoliv" +msgstr "Klepnutím na ikonu změníte příznak objektu, zda se bude tisknout či nikoliv" msgid "Click the icon to change the object settings" msgstr "Pro změnu nastavení objektu klikněte na ikonu" @@ -1385,6 +1897,9 @@ msgstr "Vzdálenost uzavření" msgid "Closing radius" msgstr "Poloměr uzavření" +msgid "Col/C" +msgstr "Col/C" + msgid "Collapse sidebar" msgstr "Sbalit postranní panel" @@ -1394,6 +1909,9 @@ msgstr "Sbalit/Rozbalit postranní panel" msgid "Color" msgstr "Barva" +msgid "Color %1% at extruder %2%" +msgstr "Barva %1% na extrudéru %2%" + msgid "Color change" msgstr "Změna barvy" @@ -1407,17 +1925,26 @@ msgid "Color Change G-code" msgstr "G-code pro změnu barvy" msgid "Color change G-code" -msgstr "G-code pro změnu barvy" +msgstr "G-Code pro změnu barvy" msgid "Color changes" msgstr "Změny barev" +msgid "Color override" +msgstr "Přepsání barvy" + msgid "Color Print" msgstr "Barevný tisk" msgid "Colorprint height" msgstr "Výška barevného tisku" +msgid "Colors" +msgstr "Barvy" + +msgid "Colour Change G-code" +msgstr "Změna barvy G-kód" + msgid "Combine infill every" msgstr "Kombinovat výplň každou" @@ -1469,6 +1996,9 @@ msgstr "komprese se nezdařila" msgid "Concentric" msgstr "Koncentrický" +msgid "Concentric (filled)" +msgstr "Soustředný (vyplněný)" + msgid "Configuration &Assistant" msgstr "Průvodce n&astavením" @@ -1482,15 +2012,14 @@ msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" -"Byl načten konfigurační balík, ale některé konfigurační hodnoty nebyly " -"rozpoznány." +"Byl načten konfigurační balík, ale některé konfigurační hodnoty nebyly rozpoznány." msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" -"Byl načten konfigurační soubor \"%1%\", ale některé konfigurační hodnoty " -"nebyly rozpoznány." +"Byl načten konfigurační soubor \"%1%\", ale některé konfigurační hodnoty nebyly " +"rozpoznány." msgid "Configuration is edited in ConfigWizard" msgstr "Nastavení se upravuje v Průvodci konfigurace" @@ -1529,12 +2058,87 @@ msgstr "Průvodce nastavením" msgid "Confirmation" msgstr "Potvrzení" +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than infill_anchor_max is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to this parameter, but no longer than anchor_length_max. \n" +"Set this parameter to zero to disable anchoring perimeters connected to a " +"single infill line." +msgstr "" +"Připojte výplňovou čáru k vnitřnímu perimetru s krátkým segmentem dodatečný " +"perimetr. Pokud je vyjádřen v procentech (příklad: 15%), je to vypočteno přes šířku " +"vysunutí výplně. Slic3r se pokusí spojit dvě blízkovyplňte čáry do krátkého " +"obvodového segmentu. Pokud takový obvodový segment neexistuje je nalezen kratší než " +"infill_anchor_max, výplňový řádek je připojen k obvodový segment pouze na jedné " +"straně a délka obvodového segmentuVzaté je omezeno na tento parametr, ale ne déle " +"než anchor_length_max. \n" +"Nastavte tento parametr na nulu pro zakázání kotevních perimetrů připojených k " +"jediný výplňový řádek." + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than this parameter is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to infill_anchor, but no longer than this parameter. \n" +"If set to 0, the old algorithm for infill connection will be used, it should " +"create the same result as with 1000 & 0." +msgstr "" +"Připojte výplňovou čáru k vnitřnímu perimetru s krátkým segmentem dodatečný " +"perimetr. Pokud je vyjádřen v procentech (příklad: 15%), je to vypočteno přes šířku " +"vysunutí výplně. Slic3r se pokusí spojit dvě blízkovyplňte čáry do krátkého " +"obvodového segmentu. Pokud takový obvodový segment neexistuje kratší než tento " +"parametr je nalezen, výplňový řádek je připojen k obvodový segment pouze na jedné " +"straně a délka obvodového segmentuTaken je omezen na infill_anchor, ale ne déle než " +"tento parametr. \n" +"Pokud je nastaveno na 0, použije se starý algoritmus pro připojení infill, měl " +"byvytvořit stejný výsledek jako s 1000 & 0." + +msgid "Connected" +msgstr "Připojeno" + +msgid "Connected to hole perimeters" +msgstr "Připojeno k perimetrům otvorů" + +msgid "Connected to outer perimeters" +msgstr "Připojeno k vnějším perimetrům" + +msgid "Connection length" +msgstr "Délka připojení" + +msgid "Connection of bottom infill lines" +msgstr "Připojení spodních výplňových linek" + +msgid "Connection of solid infill lines" +msgstr "Připojení plných výplňových linek" + +msgid "Connection of sparse infill lines" +msgstr "Spojení řídkých výplňových čar" + msgid "Connection of the support sticks and junctions" msgstr "Spojení podpůrných tyčí a spojek" +msgid "Connection of top infill lines" +msgstr "Připojení horních výplňových linek" + +msgid "Connection to %s works correctly." +msgstr "Připojení k %s funguje správně." + msgid "Connection to PrusaLink works correctly." msgstr "Připojení k PrusaLinku funguje správně." +msgid "Contact distance on top of supports" +msgstr "Kontaktní vzdálenost na horní straně podpěr" + +msgid "Contact distance under the bottom of supports" +msgstr "Kontaktní vzdálenost pod spodní částí podpěr" + msgid "Continue" msgstr "Pokračovat" @@ -1550,14 +2154,34 @@ msgstr "Pokračovat a instalovat aktualizace konfigurace?" msgid "Continue to activate a configuration snapshot %1%?" msgstr "Pokračovat v aktivaci zálohy konfigurace %1%?" +msgid "" +"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " +"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand " +"Rémi and numerous others." +msgstr "" +"Příspěvky Henrika Brixe Andersena, Nicolase Dandrimonta, Marka Hindesse,Petr " +"Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtěch Bubník, DurandRémi a mnoho " +"dalších." + +msgid "" +"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " +"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and " +"numerous others." +msgstr "" +"Příspěvky Vojtěcha Bubníka, Enrica Turriho, Duranda Remiho, OleksandryIushchenko, " +"Tamas Meszaros, Lukáš Matena, Vojtěch Král, David Kocik and řada dalších." + +msgid "Controls" +msgstr "Řízení" + msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" -"Řídí typ mostu mezi dvěma sousedními sloupky. Může být zig-zag, cross " -"(dvojitý zig-zag) nebo dynamic, který automaticky přepíná mezi prvními dvěma " -"v závislosti na vzdálenosti dvou sloupků." +"Řídí typ mostu mezi dvěma sousedními sloupky. Může být zig-zag, cross (dvojitý zig-" +"zag) nebo dynamic, který automaticky přepíná mezi prvními dvěma v závislosti na " +"vzdálenosti dvou sloupků." msgid "Convert from imperial units" msgstr "Převod z imperiálních jednotek" @@ -1565,9 +2189,24 @@ msgstr "Převod z imperiálních jednotek" msgid "Convert from meters" msgstr "Převod z metrů" +msgid "Convert round holes to polyholes" +msgstr "Převést kulaté díry na mnohonásobné díry" + +msgid "Convert round vertical holes to polyholes" +msgstr "Převést kulaté svislé otvory na mnohonásobné otvory" + msgid "Cooling" msgstr "Chlazení" +msgid "Cooling fan" +msgstr "Chladící Ventilator" + +msgid "Cooling moves are gradually accelerated towards this speed. " +msgstr "Chlazení se postupně zrychluje směrem k této rychlosti. " + +msgid "Cooling moves are gradually accelerated, starting at this speed. " +msgstr "Chlazení se postupně zrychluje, počínaje touto rychlostí. " + msgid "Cooling tube length" msgstr "Délka chladící trubičky" @@ -1599,15 +2238,15 @@ msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" -"Kopírování dočasného G-codu bylo dokončeno, ale exportovaný G-code nemohl " -"být během kontroly kopírování otevřen. Výstupní G-cod je v %1%.tmp." +"Kopírování dočasného G-codu bylo dokončeno, ale exportovaný G-code nemohl být během " +"kontroly kopírování otevřen. Výstupní G-cod je v %1%.tmp." msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"Kopírování dočasného G-codu bylo dokončeno, ale původní G-code na %1% nemohl " -"být během kontroly kopírování otevřen. Výstupní G-code je v %2%.tmp." +"Kopírování dočasného G-codu bylo dokončeno, ale původní G-code na %1% nemohl být " +"během kontroly kopírování otevřen. Výstupní G-code je v %2%.tmp." msgid "Copying of the temporary G-code to the output G-code failed" msgstr "Kopírování dočasného G-codu do výstupního G-codu selhalo" @@ -1626,9 +2265,9 @@ msgid "" "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" -"Kopírování dočasného G-codu do výstupního G-codu se nezdařilo. Může to být " -"problém s cílovým zařízením. Zkuste exportovat znovu nebo použijte jiné " -"zařízení. Poškozený výstupní G-code je v %1%.tmp." +"Kopírování dočasného G-codu do výstupního G-codu se nezdařilo. Může to být problém " +"s cílovým zařízením. Zkuste exportovat znovu nebo použijte jiné zařízení. Poškozený " +"výstupní G-code je v %1%.tmp." msgid "Copyright" msgstr "Autorská práva" @@ -1654,15 +2293,43 @@ msgstr "Náklady" msgid "Cost (money)" msgstr "Cena (peníze)" +msgid "" +"Cost of moving the extruder. The highest penalty is when the point is the " +"furthest from the position of the extruder before extruding the external " +"perimeter" +msgstr "" +"Náklady na přesun extruderu. Nejvyšší pokuta je, když je bod nejdále od pozice " +"extruderu před vytlačením vnějšího perimetru" + +msgid "" +"Cost of placing the seam at a bad angle. The worst angle (max penalty) is " +"when it's flat." +msgstr "" +"Náklady na umístění švu ve špatném úhlu. Nejhorší úhel (Max penalizace) je když je " +"to ploché." + +msgid "Cost-based" +msgstr "Na základě nákladů" + msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "Objekty nelze uspořádat! Některé geometrie mohou být neplatné." +msgid "Could not connect to %s" +msgstr "Nelze se připojit k %s" + msgid "Could not connect to Prusa SLA" msgstr "Nelze se připojit k Prusa SLA" msgid "Could not connect to PrusaLink" msgstr "Nelze se připojit k PrusaLinku" +msgid "" +"Could not detect system SSL certificate store. The slicer will be unable to " +"establish secure network connections." +msgstr "" +"Nelze zjistit systémové úložiště certifikátů SSL. Průřez nebude schopen nastavte " +"zabezpečená síťová připojení." + msgid "Could not get a valid Printer Host reference" msgstr "Nelze získat platný odkaz na tiskový server" @@ -1672,8 +2339,7 @@ msgstr "Nelze získat prostředky pro vytvoření nového spojení" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Zakrýt smyčkami horní kontaktní vrstvu podpěr. Ve výchozím nastavení " -"zakázáno." +"Zakrýt smyčkami horní kontaktní vrstvu podpěr. Ve výchozím nastavení zakázáno." msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " @@ -1687,9 +2353,36 @@ msgstr "" msgid "CRC-32 check failed" msgstr "CRC-32 kontrola selhala" -msgid "Create pad around object and ignore the support elevation" +msgid "Create a test print to help you to level your printer bed." +msgstr "Vytvořte zkušební tisk, který vám pomůže vyrovnat postel tiskárny." + +msgid "Create a test print to help you to set your bridge flow ratio." +msgstr "Vytvořte zkušební tisk, který vám pomůže nastavit poměr průtoku mostu." + +msgid "" +"Create a test print to help you to set your filament extrusion multiplier." +msgstr "" +"Vytvořte zkušební tisk, který vám pomůže nastavit multiplikátor vytlačování " +"filamentu." + +msgid "Create a test print to help you to set your filament temperature." +msgstr "Vytvořte zkušební tisk, který vám pomůže nastavit teplotu vlákna." + +msgid "" +"Create a test print to help you to set your over-bridge flow ratio and " +"ironing pattern." msgstr "" -"Vytvoří podložku kolem objektu a ignorujte nadzvednutí objektu podpěrami" +"Vytvořte zkušební tisk, který vám pomůže nastavit poměr přemostění průtoku a vzor " +"na ironing." + +msgid "Create a test print to help you to set your retraction length." +msgstr "Vytvořte zkušební tisk, který vám pomůže nastavit délku zatažení." + +msgid "Create an object by writing little easy script." +msgstr "Vytvořte objekt napsáním malého jednoduchého skriptu." + +msgid "Create pad around object and ignore the support elevation" +msgstr "Vytvoří podložku kolem objektu a ignorujte nadzvednutí objektu podpěrami" msgid "Creating a new project" msgstr "Vytváření nového projektu" @@ -1715,6 +2408,13 @@ msgstr "Ctrl + kolečko myši" msgid "Cubic" msgstr "Kubický" +msgid "" +"CURL init has failed. The slicer will be unable to establish network " +"connections. See logs for additional details." +msgstr "" +"Inicializace CURL selhala. Slicer nebude schopen vytvořit síťpřipojení. Další " +"podrobnosti naleznete v protokolech." + msgid "Current preset is inherited from" msgstr "Aktuální nastavení je zděděné od" @@ -1724,6 +2424,21 @@ msgstr "Aktuální nastavení je zděděno z výchozího nastavení." msgid "Current version:" msgstr "Aktuální verze:" +msgid "Curve smoothing" +msgstr "Vyhlazení křivek" + +msgid "Curve smoothing cutoff dist" +msgstr "Mezní vzdálenost vyhlazení křivky" + +msgid "Curve smoothing minimum angle (concave)" +msgstr "Minimální úhel vyhlazování křivky (konkávní)" + +msgid "Curve smoothing minimum angle (convex)" +msgstr "Minimální úhel vyhlazování křivky (konvexní)" + +msgid "Curve smoothing precision" +msgstr "Přesnost vyhlazování křivek" + msgid "Custom" msgstr "Vlastní" @@ -1732,9 +2447,11 @@ msgid "" "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" -"Pro HTTPS připojení OctoPrintu lze zadat vlastní CA certifikát ve formátu " -"crt/pem. Pokud zůstane pole prázdné, použije se výchozí úložiště certifikátů " -"OS CA." +"Pro HTTPS připojení OctoPrintu lze zadat vlastní CA certifikát ve formátu crt/pem. " +"Pokud zůstane pole prázdné, použije se výchozí úložiště certifikátů OS CA." + +msgid "Custom Filament variables" +msgstr "Vlastní proměnné vlákna" msgid "Custom G-code" msgstr "Vlastní G-code" @@ -1745,12 +2462,18 @@ msgstr "Vlastní G-code v současné vrstvě (%1% mm)." msgid "Custom G-codes" msgstr "Vlastní G-cody" +msgid "Custom Print variables" +msgstr "Vlastní tiskové proměnné" + msgid "Custom Printer" msgstr "Vlastní tiskárna" msgid "Custom Printer Setup" msgstr "Vlastní nastavení tiskárny" +msgid "Custom Printer variables" +msgstr "Vlastní proměnné tiskárny" + msgid "Custom printer was installed and it will be activated." msgstr "Vlastní tiskárna byla nainstalována a bude aktivována." @@ -1767,6 +2490,9 @@ msgstr "" msgid "Custom template (\"%1%\")" msgstr "Vlastní šablona (\"%1%\")" +msgid "Custom variables" +msgstr "Vlastní proměnné" + msgid "Cut" msgstr "Řezat" @@ -1776,6 +2502,12 @@ msgstr "Řez Rovinou" msgid "Cut model at the given Z." msgstr "Rozříznout model v dané výšce Z." +msgid "cutoff" +msgstr "Odříznout" + +msgid "Cutting corners" +msgstr "Řezání rohů" + msgid "D&eselect All" msgstr "Odznačit Vš&e" @@ -1795,19 +2527,22 @@ msgid "Decrease Instances" msgstr "Odebrání Instancí" msgid "default" -msgstr "výchozí" +msgstr "Výchozí" msgid "Default" msgstr "Výchozí" +msgid "Default acceleration" +msgstr "Výchozí zrychlení" + msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" -"Výchozí úhel pro orientaci výplně. Bude pro něj použito křížové šrafování. " -"Mosty budou vyplněny nejlepším směrem, který Slic3r dokáže rozpoznat, takže " -"toto nastavení je neovlivní." +"Výchozí úhel pro orientaci výplně. Bude pro něj použito křížové šrafování. Mosty " +"budou vyplněny nejlepším směrem, který Slic3r dokáže rozpoznat, takže toto " +"nastavení je neovlivní." msgid "Default color" msgstr "Výchozí barva" @@ -1815,9 +2550,25 @@ msgstr "Výchozí barva" msgid "default color" msgstr "výchozí barva" +msgid "Default distance between objects" +msgstr "Výchozí vzdálenost mezi objekty" + +msgid "" +"Default distance used for the auto-arrange feature of the platter.\n" +"Set to 0 to use the last value instead." +msgstr "" +"Výchozí vzdálenost použitá pro funkci automatického uspořádání talíře.\n" +"Nastavte na 0, chcete-li místo toho použít poslední hodnotu." + +msgid "Default extrusion spacing" +msgstr "Výchozí rozestup vysunutí" + msgid "Default extrusion width" msgstr "Výchozí šířka extruze" +msgid "Default fan speed" +msgstr "Výchozí rychlost ventilátoru" + msgid "default filament profile" msgstr "výchozí profil filamentu" @@ -1829,8 +2580,14 @@ msgid "" "selection of the current printer profile, this filament profile will be " "activated." msgstr "" -"Výchozí materiálový profil spojený se současným profilem tiskárny. Při " -"výběru současného profilu tiskárny se aktivuje tento materiálový profil." +"Výchozí materiálový profil spojený se současným profilem tiskárny. Při výběru " +"současného profilu tiskárny se aktivuje tento materiálový profil." + +msgid "Default first layer speed" +msgstr "Výchozí rychlost první vrstvy" + +msgid "Default infill margin" +msgstr "Výchozí okraj výplně" msgid "default print profile" msgstr "výchozí tiskový profil" @@ -1861,6 +2618,17 @@ msgstr "výchozí hodnota" msgid "Define a custom printer profile" msgstr "Vytvořit vlastní tiskový profil" +msgid "" +"Defines the pad cavity depth. Set zero to disable the cavity. Be careful " +"when enabling this feature, as some resins may produce an extreme suction " +"effect inside the cavity, which makes peeling the print off the vat foil " +"difficult." +msgstr "" +"Definuje hloubku dutiny podložky. Pro deaktivaci dutiny nastavte nulu. Buďte " +"opatrní.při povolení této funkce, protože některé pryskyřice mohou produkovat " +"extrémní sáníefekt uvnitř dutiny, který umožňuje odlupování tisku z vanové " +"fólieobtížný." + msgid "Delay after unloading" msgstr "Zpoždění po vyjmutí" @@ -1954,11 +2722,17 @@ msgstr "Smazat všechny objekty" msgid "Deletes the current selection" msgstr "Smaže aktuální výběr" +msgid "Dense infill algorithm" +msgstr "Algoritmus husté výplně" + +msgid "Dense infill layer" +msgstr "Hustá výplňová vrstva" + msgid "Density" msgstr "Hustota" msgid "Density of internal infill, expressed in the range 0% - 100%." -msgstr "Hustota vnitřní výplně vyjádřená v rozmezí 0 až 100 %." +msgstr "Hustota vnitřní výplně, vyjádřená v rozmezí 0% - 100%." msgid "Density of the first raft or support layer." msgstr "Hustota prvního vrstvy raftu nebo podpěrné vrstvy." @@ -1966,6 +2740,12 @@ msgstr "Hustota prvního vrstvy raftu nebo podpěrné vrstvy." msgid "Dependencies" msgstr "Závislosti" +msgid "Dere." +msgstr "Deretractrkce." + +msgid "Deretraction" +msgstr "Deretractrkce" + msgid "Deretraction Speed" msgstr "Rychlost deretrakce" @@ -2002,19 +2782,38 @@ msgstr "Oddělení přednastavení" msgid "Detached" msgstr "Odpojeno" +msgid "" +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace). If unchecked, Slic3r may try to fit " +"perimeters where it's not possible, creating some overlap leading to over-" +"extrusion." +msgstr "" +"Detekujte stěny o jedné šířce (části, kde se dva výlisky nevejdou a my potřebujeme " +"sbalit je do jediné stopy). Pokud není zaškrtnuto, Slic3r se může pokusit " +"přizpůsobit perimetry, kde to není možné, vytváří se určité překrytí vedoucí k pře-" +"extruze." + msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "" -"Rozpoznat nepřipojené části daného modelu(ů) a rozdělit je do samostatných " -"objektů." +"Rozpoznat nepřipojené části daného modelu(ů) a rozdělit je do samostatných objektů." msgid "Detected advanced data" msgstr "Byla detekována data z pokročilého režimu" +msgid "Detection radius" +msgstr "Detekční rádius" + +msgid "Determines whether toolchange temperatures will be applied" +msgstr "Určuje, zda budou použity teploty pro výměnu nástrojů" + msgid "Device:" msgstr "Zařízení:" +msgid "Dialogs" +msgstr "Dialogy" + msgid "Diameter" msgstr "Průměr" @@ -2030,15 +2829,26 @@ msgstr "Průměr konce podpůrného hrotu" msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." -msgstr "" -"Průměr tiskové podložky. Přepokládaný počátek (0,0) je umístěn uprostřed." +msgstr "Průměr tiskové podložky. Předpokládaný počátek (0,0) je umístěn uprostřed." msgid "differs from the original file" msgstr "liší se od původního souboru" +msgid "Dimension:" +msgstr "Rozměr:" + +msgid "Dimensional accuracy (default)" +msgstr "Rozměrová přesnost (výchozí)" + msgid "Direction" msgstr "Směr" +msgid "Disable" +msgstr "Zakázat" + +msgid "Disable 'Avoid crossing perimeters' for the first layer." +msgstr "U první vrstvy deaktivujte 'Vyvarujte se překračování perimetrů'." + msgid "Disable \"%1%\"" msgstr "Zakázat \"%1%\"" @@ -2048,6 +2858,13 @@ msgstr "Vypnutí chlazení pro prvních" msgid "Disabled" msgstr "Zakázáno" +msgid "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will probably be invisible)." +msgstr "" +"Deaktivuje zatažení, když dráha jízdy nepřesahuje horní vrstvu perimetry (a tudíž " +"jakýkoli sliz bude pravděpodobně neviditelný)." + msgid "Discard" msgstr "Zahodit" @@ -2066,9 +2883,15 @@ msgstr "Výška displeje" msgid "Display horizontal mirroring" msgstr "Horizontální zrcadlení displeje" +msgid "Display mirroring" +msgstr "Zrcadlení displeje" + msgid "Display orientation" msgstr "Orientace displeje" +msgid "Display setting icons" +msgstr "Ikony nastavení zobrazení" + msgid "Display the Print Host Upload Queue window" msgstr "Zobrazit okno s frontou nahrávání do tiskového serveru" @@ -2078,14 +2901,19 @@ msgstr "Vertikální zrcadlení displeje" msgid "Display width" msgstr "Šířka displeje" +msgid "Distance" +msgstr "Vzdálenost" + msgid "Distance between ironing lines" -msgstr "Vzdálenost mezi žehlicími tahy" +msgstr "Vzdálenost mezi ironing tahy" msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." -msgstr "" -"Rozteč mezi dvěmi spojkami, které spojují objekt s vygenerovanou podložkou." +msgstr "Rozteč mezi dvěma spojkami, které spojují objekt s vygenerovanou podložkou." + +msgid "Distance from object" +msgstr "Vzdálenost od objektu" msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " @@ -2099,8 +2927,11 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware. " msgstr "" -"Vzdálenost špičky extruderu od místa, kde je zaparkován filament při " -"vytažení. Měla by se shodovat s hodnotou ve firmware tiskárny. " +"Vzdálenost špičky extruderu od místa, kde je zaparkován filament při vytažení. Měla " +"by se shodovat s hodnotou ve firmware tiskárny. " + +msgid "Distribution" +msgstr "Rozdělení" msgid "Divide by zero" msgstr "Dělení nulou" @@ -2154,6 +2985,9 @@ msgstr "neobsahuje platný G-code." msgid "Don't arrange" msgstr "Neuspořádávat" +msgid "Don't avoid crossing on 1st layer" +msgstr "Nevyhýbejte se křížení v 1. vrstvě" + msgid "Don't import" msgstr "Neimportovat" @@ -2172,6 +3006,16 @@ msgstr "Znovu nezobrazovat" msgid "Don't support bridges" msgstr "Nevytvářet podpěry pod mosty" +msgid "Don't switch" +msgstr "Neprepinejte" + +msgid "" +"Don't wipe when you don't cross a perimeter. Need " +"'only_retract_when_crossing_perimeters'and 'wipe' enabled." +msgstr "" +"Neutírejte, když nepřekročíte perimetr. " +"Potřebujte'only_retract_when_crossing_perimeters'a 'wipe' povoleno." + msgid "Downgrade" msgstr "Downgrade" @@ -2191,8 +3035,8 @@ msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" -"Vrtání otvorů do meshe selhalo. Je to obvykle způsobené poškozeným modelem. " -"Zkuste ho nejprve opravit." +"Vrtání otvorů do meshe selhalo. Je to obvykle způsobené poškozeným modelem. Zkuste " +"ho nejprve opravit." msgid "Drop to bed" msgstr "Spadnout na podložku" @@ -2212,6 +3056,12 @@ msgstr "Dynamic" msgid "E&xport" msgstr "E&xportovat" +msgid "Each militer add this value to the retraction value." +msgstr "Každý militr přičte tuto hodnotu k hodnotě zatažení." + +msgid "Ear pattern" +msgstr "Ušní vzor" + msgid "Edit" msgstr "Upravit" @@ -2219,14 +3069,13 @@ msgid "Edit color" msgstr "Upravit barvu" msgid "Edit current color - Right click the colored slider segment" -msgstr "" -"Upravit aktuální barvu - Klik pravým tlačítkem na barevný segment posuvníku" +msgstr "Upravit aktuální barvu - Klik pravým tlačítkem na barevný segment posuvníku" msgid "Edit custom G-code" msgstr "Upravit vlastní G-code" msgid "Edit Height Range" -msgstr "Úprava Rozsahu vrstev" +msgstr "Úprava Rozsahu Vrstev" msgid "Edit pause print message" msgstr "Upravit zprávu při pozastavení tisku" @@ -2268,8 +3117,15 @@ msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" -"Nadzvednutí objektu je příliš malé. Pomocí funkce „Podložka okolo objektu“ " -"můžete objekt vytisknout bez nadzvednutí nad podložku." +"Nadzvednutí objektu je příliš malé. Pomocí funkce „Podložka okolo objektu“ můžete " +"objekt vytisknout bez nadzvednutí nad podložku." + +msgid "" +"Emit something at 1 minute intervals into the G-code to let the firmware " +"show accurate remaining time." +msgstr "" +"Vysílejte něco v 1 minutových intervalech do G-kódu, abyste nechali " +"firmwarezobrazit přesný zbývající čas." msgid "Empty layer between %1% and %2%." msgstr "Prázdná vrstva mezi %1% a %2%." @@ -2277,6 +3133,9 @@ msgstr "Prázdná vrstva mezi %1% a %2%." msgid "Enable" msgstr "Zapnout" +msgid "Enable advanced wiping volume" +msgstr "Povolit pokročilou hlasitost stírání" + msgid "Enable auto cooling" msgstr "Zapnutí automatického chlazení" @@ -2286,6 +3145,16 @@ msgstr "Aktivace tmavého režimu" msgid "Enable fan if layer print time is below" msgstr "Zapnout ventilátor, pokud je doba tisku vrstvy kratší než" +msgid "Enable Gap fill" +msgstr "Povolit výplň tenkých stěn" + +msgid "" +"Enable gap fill algorithm. It will extrude small lines between perimeters " +"when there is not enough space for another perimeter or an infill." +msgstr "" +"Povolit algoritmus vyplňování tenkých stěn. Mezi perimetry vytlačí malé čárykdyž není " +"dostatek místa pro další perimetr nebo výplň." + msgid "Enable hollowing" msgstr "Povolit tvorbu dutin" @@ -2293,12 +3162,15 @@ msgid "Enable horizontal mirroring of output images" msgstr "Zapne horizontální zrcadlení výstupních obrázků" msgid "Enable ironing" -msgstr "Zapnout ironing" +msgstr "Zapnout Ironing" msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "Pro hladké vrchní vrstvy povolte ironing pomocí ohřáté tiskové hlavy" +msgid "Enable ironing post-process" +msgstr "Zapnout ironing následný proces" + msgid "" "Enable reading unknown configuration values by silently substituting them " "with defaults." @@ -2316,8 +3188,11 @@ msgstr "" msgid "Enable rotations (slow)" msgstr "Povolit rotace (pomalé)" +msgid "Enable Skinnydip string reduction" +msgstr "Povolit redukci řetězce Skinnydip" + msgid "Enable support for legacy 3DConnexion devices" -msgstr "Povolit podporu pro starší zařízení 3DConnexion" +msgstr "Povolit podporu pro starší zařízení 3D Připojení" msgid "Enable support material generation." msgstr "Zapne generování podpěr." @@ -2331,10 +3206,19 @@ msgid "" "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"Zapněte tuto možnost, chcete-li do G-Code přidávat komentáře, které budou " -"určovat, příslušnost tiskových pohybů k jednotlivým objektům. To je užitečné " -"pro Octoprint plugin CancelObject. Nastavení NENÍ kompatibilní se Single " -"Extruder Multi Material konfigurací a s čištěním trysky do objektu / výplně." +"Zapněte tuto možnost, chcete-li do G-Code přidávat komentáře, které budou určovat, " +"příslušnost tiskových pohybů k jednotlivým objektům. To je užitečné pro Octoprint " +"plugin CancelObject. Nastavení NENÍ kompatibilní se Single Extruder Multi Material " +"konfigurací a s čištěním trysky do objektu / výplně." + +msgid "" +"Enable this to get a commented G-code file, with each line explained by " +"descriptive text. If you print from an SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" +"Povolením této možnosti získáte soubor s komentářem G-kódu, přičemž každý řádek " +"bude vysvětlen popisný text. Pokud tisknete z karty SD, další hmotnost soubor by " +"mohl zpomalit firmware." msgid "Enable variable layer height feature" msgstr "Zapnout variabilní výšku vrstev" @@ -2342,15 +3226,43 @@ msgstr "Zapnout variabilní výšku vrstev" msgid "Enable vertical mirroring of output images" msgstr "Zapne vertikální zrcadlení výstupních obrázků" +msgid "Enable wipe tower" +msgstr "Povolit stírací věž" + msgid "Enabled" msgstr "Povoleno" +msgid "" +"Enables the creation of a support layer under the first solid layer. This " +"allows you to use a lower infill ratio without compromising the top quality. " +"The dense infill is laid out with a 50% infill density." +msgstr "" +"Umožňuje vytvoření podpůrné vrstvy pod první plnou vrstvou. Umožňuje používat nižší " +"poměr výplně, aniž by byla ohrožena špičková kvalita. Hustá výplň je položena s " +"50% hustotou výplně." + msgid "End G-code" msgstr "Konec G-code" msgid "Enforce" msgstr "Vynutit" +msgid "Enforce 100% fill volume" +msgstr "Vynutit 100% objem výplně" + +msgid "" +"Enforce a specific color on thumbnails. If not enforced, their color will be " +"the one defined by the filament." +msgstr "" +"Vynutit konkrétní barvu na miniaturách. Pokud nebude vynucena, jejich barva bude " +"ten definovaný vláknem." + +msgid "Enforce lift on first layer" +msgstr "Vynutit zvednutí na první vrstvě" + +msgid "Enforce on first layer" +msgstr "Vynutit na první vrstvě" + msgid "Enforce seam" msgstr "Vynucení švu" @@ -2363,12 +3275,24 @@ msgstr "Vynutit podpěry pro prvních n vrstev" msgid "Enforce supports" msgstr "Vynucení podpěr" +msgid "Enforce thumbnail color" +msgstr "Vynutit barvu miniatur" + msgid "Enqueued" msgstr "Zařazeno do fronty" msgid "Ensure on bed" msgstr "Zajistit položení na podložku" +msgid "" +"Ensure that the slicer won't add heating, fan, extruder... commands before " +"or just after your start-gcode.If set to true, you have to write a good and " +"complete start_gcode, as no checks are made anymore." +msgstr "" +"Ujistěte se, že slicer nepřidá příkazy ohřevu, ventilátoru, extrudéru... dřívenebo " +"těsně za vaším start-gcode. Pokud je nastaveno na true, musíte napsat dobrý a " +"dokončete start_gcode, protože se již neprovádějí žádné kontroly." + msgid "Ensure vertical shell thickness" msgstr "Zajistit tloušťku svislých stěn" @@ -2378,19 +3302,35 @@ msgstr "Zadejte hledaný výraz" msgid "Enter custom G-code used on current layer" msgstr "Vložte vlastní G-code použitý v této vrstvě" +msgid "" +"Enter here the gcode to end the toolhead action, like stopping the spindle. " +"You have access to {next_extruder} and {previous_extruder}. " +"previous_extruder is the 'extruder number' of the current milling tool, it's " +"equal to the index (begining at 0) of the milling tool plus the number of " +"extruders. next_extruder is the 'extruder number' of the next tool, it may " +"be a normal extruder, if it's below the number of extruders. The number of " +"extruder is available at {extruder}and the number of milling tool is " +"available at {milling_cutter}." +msgstr "" +"Sem zadejte gkód pro ukončení činnosti nástrojové hlavy, jako je zastavení vřetena." +"Máte přístup k {next extruder} a {previou extruder}.předchozí extruder je číslo " +"extrudéru aktuálního frézovacího nástroje, je torovná se indexu (začínající 0) " +"frézovacího nástroje plus číslo extruders. next extruder je 'číslo extrudéru' " +"dalšího nástroje, může buďte normálním extruderem, pokud je nižší než počet " +"extruderů. Počet extruder je dostupný na {extruder} a počet frézovacích nástrojů je " +"k dispozici na {milling_cutter}." + msgid "Enter new name" msgstr "Zadejte nový název" msgid "Enter short message shown on Printer display when a print is paused" msgstr "" -"Zadejte krátkou zprávu, která se zobrazí na displeji tiskárny při " -"pozastavení tisku" +"Zadejte krátkou zprávu, která se zobrazí na displeji tiskárny při pozastavení tisku" msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." -msgstr "" -"Zadejte požadovanou teplotu filamentu, aby se spojil s vyhřívanou podložkou." +msgstr "Zadejte požadovanou teplotu filamentu, aby se spojil s vyhřívanou podložkou." msgid "Enter the diameter of your filament." msgstr "Zadejte průměr vašeho filamentu." @@ -2407,6 +3347,19 @@ msgstr "Zadejte pohyb v rámci vrstvy, na který chcete přejít" msgid "Enter the number of copies:" msgstr "Zadejte počet kopií:" +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling " +"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"compensate. Only the filament used for the perimeter is taken into account.\n" +"Be sure to allow enough space between objects, as this compensation is done " +"after the checks." +msgstr "" +"Zadejte procento smrštění, které vlákno získá po ochlazení(94 %, pokud naměříte 94 " +"mm místo 100 mm). Součást bude zmenšena v xy na kompenzovat. Zohledňuje se pouze " +"vlákno použité pro perimetr.\n" +"Ujistěte se, že je mezi objekty dostatek prostoru, protože tato kompenzace se " +"provádí po kontrolách." + msgid "Enter the temperature needed for extruding your filament." msgstr "Zadejte požadovanou teplotu pro extruzi vašeho filamentu." @@ -2419,13 +3372,12 @@ msgstr "" "Zadejte hmotnost prázdné cívky. Díky tomu budete moci určit, zda máte na " "cívce dostatečné množství filamentu pro dokončení tisku. Zvážíte cívku s " "částečně spotřebovaným filamentem a hodnotu porovnáte s vypočtenou hmotností " -"vypočítanou PrusaSlicerem." +"vypočítanou SuperSlicerem." msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." -msgstr "" -"Zde zadejte cenu filamentu za kg. Slouží pouze pro statistické informace." +msgstr "Zde zadejte cenu filamentu za kg. Slouží pouze pro statistické informace." msgid "" "Enter your filament density here. This is only for statistical information. " @@ -2433,9 +3385,9 @@ msgid "" "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" -"Zde zadejte hustotu filamentu. Toto je pouze pro statistické informace. " -"Přípustný způsob je zvážit známou délku filamentu a vypočítat poměr délky k " -"objemu. Je lepší vypočítat objem přímo přes posun." +"Zde zadejte hustotu filamentu. Toto je pouze pro statistické informace. Přípustný " +"způsob je zvážit známou délku filamentu a vypočítat poměr délky k objemu. Je lepší " +"vypočítat objem přímo přes posun." msgid "" "Enter your filament diameter here. Good precision is required, so use a " @@ -2475,6 +3427,22 @@ msgstr "Chyba při načítání shaderů" msgid "Error Message" msgstr "Chybová hláška" +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error." +msgstr "" +"Chyba při analýze konfiguračního souboru %1%, pravděpodobně je poškozen. Zkuste " +"ručně smažte soubor, abyste se zotavili z chyby." + +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error. Your user profiles will not be " +"affected." +msgstr "" +"Chyba při analýze konfiguračního souboru %1%, pravděpodobně je poškozen. Zkuste " +"ručně smažte soubor, abyste se zotavili z chyby. Vaše uživatelské profily nebudou " +"postižené." + msgid "Error uploading to print host:" msgstr "Chyba při nahrávání do tiskového serveru:" @@ -2516,6 +3484,18 @@ msgstr "Paritní vyplňování" msgid "Event" msgstr "Akce" +msgid "Exact last layer height" +msgstr "Přesná výška poslední vrstvy" + +msgid "Exact pattern" +msgstr "Přesný vzor" + +msgid "except for the first %1% layers where the fan is disabled" +msgstr "kromě prvních %1% vrstev, kde je ventilátor deaktivován" + +msgid "except for the first layer where the fan is disabled" +msgstr "kromě první vrstvy, kde je vypnutý ventilátor" + msgid "Exit %s" msgstr "Ukončit %s" @@ -2535,8 +3515,73 @@ msgstr "Rozšíření raftu v rovině XY pro lepší stabilitu." msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." -msgstr "" -"Experimentální nastavení pro zabránění tvorbě podpěr v oblastech po mosty." +msgstr "Experimentální nastavení pro zabránění tvorbě podpěr v oblastech po mosty." + +msgid "" +"Experimental option to remove perimeters where there is nothing under them " +"and where a bridged infill should be better. \n" +" * Remove perimeters: remove the unsupported perimeters, leave the bridge " +"area as-is.\n" +" * Keep only bridges: remove the perimeters in the bridge areas, keep only " +"bridges that end in solid area.\n" +" * Keep bridges and overhangs: remove the unsupported perimeters, keep only " +"bridges that end in solid area, fill the rest with overhang perimeters" +"+bridges.\n" +" * Fill the voids with bridges: remove the unsupported perimeters, draw " +"bridges over the whole hole.* !! this one can escalate to problems with " +"overhangs shaped like /\\, so you should use it only on one layer at a time " +"via the height-range modifier!\n" +"!!Computationally intensive!!. " +msgstr "" +"Experimentální možnost odstranění perimetrů tam, kde pod nimi nic není kde by " +"přemostěná výplň měla být lepší. \n" +" * Odstraňte perimetry: odstraňte nepodporované perimetry, opusťte most plocha tak " +"jak je.\n" +" * Ponechat pouze mosty: odstranit perimetry v oblastech mostů, ponechat pouze " +"mosty, které končí pevnou plochou.\n" +" * Zachovat mosty a převisy: odstranit nepodepřené perimetry, ponechat pouze mosty, " +"které končí pevnou plochou, vyplňte zbytek perimetry převisů+mosty.\n" +" * Vyplňte prázdné prostory mosty: odstraňte nepodepřené perimetry, nakreslete " +"mosty přes celou díru.* !! tohle může eskalovat až k problémůmpřesahy ve tvaru /" +"\\, takže byste jej měli používat vždy pouze na jedné vrstvě přes modifikátor " +"rozsahu výšky!\n" +"!!Výpočetně náročné!!. " + +msgid "" +"Experimental option which modifies (in solid infill) fill flow to have the " +"exact amount of plastic inside the volume to fill (it generally changes the " +"flow from -7% to +4%, depending on the size of the surface to fill and the " +"overlap parameters, but it can go as high as +50% for infill in very small " +"areas where rectilinear doesn't have good coverage). It has the advantage to " +"remove the over-extrusion seen in thin infill areas, from the overlap ratio" +msgstr "" +"Experimentální možnost, která upravuje (v plné výplni) průtok plnění tak, aby měl " +"přesné množství plastu uvnitř objemu, který se má vyplnit (obecně se tím mění " +"průtok od -7% do +4%, v závislosti na velikosti povrchu, který se má vyplnit, a " +"překrývající se parametry, ale u velmi malých výplní to může dosáhnout až " +"+50%oblasti, kde přímočarý nemá dobré pokrytí). Výhodou je, že odstraňte nadměrné " +"vytlačování pozorované v tenkých oblastech výplně z poměru překrytí" + +msgid "" +"Experimental setting. Fan speeds that are too high can clash with the " +"hotend's PID routine." +msgstr "" +"Experimentální nastavení. Příliš vysoké otáčky ventilátoru mohou být v rozporu s " +"hotendova PID rutina." + +msgid "" +"Experimental setting. May enable the hotend to cool down faster during " +"toolchanges" +msgstr "" +"Experimentální nastavení. Může umožnit rychlejší ochlazení hotendu během výměny " +"nástrojů" + +msgid "" +"Experimental: drops nozzle temperature during cooling moves instead of prior " +"to extraction to reduce wait time." +msgstr "" +"Experimentální: pokles teploty trysky během chladicích pohybů namísto předchozíhok " +"extrakci, aby se zkrátila doba čekání." msgid "Expert mode" msgstr "Expertní režim" @@ -2580,18 +3625,19 @@ msgstr "Exportovat Konfigurační balík včetně fyzických tiskáren" msgid "Export current configuration to file" msgstr "Exportovat současnou konfiguraci do souboru" +msgid "" +"Export current configuration to file, with only settings compatible with " +"PrusaSlicer" +msgstr "" +"Exportovat aktuální konfiguraci do souboru, pouze s nastavením kompatibilním s " +"PrusaSlicer" + msgid "Export current plate as G-code" msgstr "Exportovat stávající plochu do G-code" msgid "Export current plate as G-code to SD card / Flash drive" msgstr "Exportovat aktuální podložku jako G-code na SD kartu / Flash disk" -msgid "Export current plate as STL" -msgstr "Exportovat stávající plochu jako STL" - -msgid "Export current plate as STL including supports" -msgstr "Exportovat stávající plochu včetně podpěr jako STL" - msgid "" "Export full pathnames of models and parts sources into 3mf and amf files" msgstr "Exportovat úplné zdrojové cesty modelů a dílů do souborů 3mf a amf" @@ -2614,12 +3660,6 @@ msgstr "Exportovat OBJ soubor:" msgid "Export of a temporary 3mf file failed" msgstr "Export dočasného 3MF souboru selhalo" -msgid "Export Plate as &STL" -msgstr "Exportovat Plochu jako &STL" - -msgid "Export Plate as STL &Including Supports" -msgstr "Exportovat T&iskovou plochu včetně podpěr jako STL" - msgid "Export SLA" msgstr "Exportovat SLA" @@ -2644,6 +3684,9 @@ msgstr "Exportovat model(y) jako OBJ." msgid "Export the model(s) as STL." msgstr "Exportovat model(y) jako STL." +msgid "Export to &Prusa Config" +msgstr "Exportovat do &Prusa Config" + msgid "Export to SD card / Flash drive" msgstr "Export na SD kartu / Flash disk" @@ -2677,9 +3720,36 @@ msgstr "Osvit" msgid "Exposure time" msgstr "Doba osvitu" +msgid "ext peri first for inner side" +msgstr "extra perimetr first pro vnitřní stranu" + +msgid "Ext peri first for outer side" +msgstr "Extra peri první pro vnější stranu" + +msgid "Ext. peri. cut corners" +msgstr "Vnější obvodové řezané rohy" + +msgid "Ext. peri. overlap" +msgstr "Vnější peri. překrytí" + +msgid "External" +msgstr "Vnější" + msgid "External perimeter" msgstr "Vnější perimetr" +msgid "external perimeter" +msgstr "Vnější perimetr" + +msgid "External perimeter fan speed" +msgstr "Rychlost ventilátoru vnějšího perimetru" + +msgid "External perimeter first" +msgstr "Nejprve vnější perimetr" + +msgid "external perimeter overlap" +msgstr "překrytí vnějšího perimetru" + msgid "external perimeters" msgstr "vnější perimetry" @@ -2689,12 +3759,57 @@ msgstr "Vnější perimetry" msgid "External perimeters first" msgstr "Nejprve tisknout vnější perimetry" +msgid "External perimeters spacing" +msgstr "Vzdálenost vnějších perimetrů" + +msgid "External perimeters speed" +msgstr "Rychlost vnějšího perimetru" + +msgid "External perimeters width" +msgstr "Šířka vnějšího perimetru" + msgid "Extra length on restart" msgstr "Extra vzdálenost při návratu" msgid "Extra loading distance" msgstr "Extra délka při zavádění" +msgid "Extra perimeter on odd layers" +msgstr "Extra perimetr na lichých vrstvách" + +msgid "Extra perimeters" +msgstr "Extra perimetr" + +msgid "Extra perimeters (do nothing)" +msgstr "Extra perimetr (nedělat nic)" + +msgid "Extra perimeters over overhangs" +msgstr "Extra perimetr přes převisy" + +msgid "Extra skirt lines on the first layer." +msgstr "Extra linie obrysu v první vrstvě." + +msgid "Extra unretraction" +msgstr "Extra vzdálenost při návratu" + +msgid "Extra Wipe for external perimeters" +msgstr "Extra očistit pro vnější perimetri" + +msgid "Extrat length on toolchange restart" +msgstr "Extra délka při restartu výměny nástroje" + +msgid "" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on odd layers. This alternating pattern can drastically improve " +"steep overhang.\n" +"!! this is a very slow algorithm (it uses the same results as " +"extra_perimeters_overhangs) !!" +msgstr "" +"Vysunout perimetry, které mají část přes přesah v opačném směrusměr na lichých " +"vrstvách. Tento střídající se vzor může výrazně zlepšitstrmý převis.\n" +"!! toto je velmi pomalý algoritmus (používá stejné výsledky jako " +"extra_perimeters_overhangs) !!" + msgid "Extruder" msgstr "Extruder" @@ -2707,12 +3822,49 @@ msgstr "Extruder (nástroj) se změní na Extruder \"%1%\"" msgid "Extruder changed to" msgstr "Extruder změněn na" +msgid "Extruder clearance (mm)" +msgstr "Kolizní oblast extrudéru (mm)" + +msgid "Extruder clearance height" +msgstr "Světlá výška extrudéru" + +msgid "Extruder clearance radius" +msgstr "Poloměr vůle extrudéru" + msgid "Extruder Color" msgstr "Barva extruderu" +msgid "Extruder decimals" +msgstr "Extruder desetinná místa" + +msgid "Extruder fan offset" +msgstr "Offset ventilátoru extrudéru" + +msgid "" +"Extruder nozzle temperature for first layer. If you want to control " +"temperature manually during print, set zero to disable temperature control " +"commands in the output file." +msgstr "" +"Teplota trysky extrudéru pro první vrstvu. Pokud chcete kontrolovat teplota ručně " +"během tisku, nastavte nulu pro deaktivaci ovládání teplotypříkazy ve výstupním " +"souboru." + +msgid "" +"Extruder nozzle temperature for layers after the first one. Set zero to " +"disable temperature control commands in the output G-code." +msgstr "" +"Teplota trysky extrudéru pro vrstvy po první. Nastavte nulu na zakázat příkazy " +"řízení teploty ve výstupním G-kódu." + msgid "Extruder offset" msgstr "Odsazení extruderu" +msgid "Extruder retraction calibration" +msgstr "Kalibrace retrakce extrudéru" + +msgid "Extruder temp offset" +msgstr "Offset teploty extrudéru" + msgid "Extruders" msgstr "Extrudery" @@ -2725,6 +3877,9 @@ msgstr "Extruze" msgid "Extrusion axis" msgstr "Osa extruderu" +msgid "Extrusion direction" +msgstr "Pokyny extruze" + msgid "Extrusion multiplier" msgstr "Násobič extruze" @@ -2758,12 +3913,24 @@ msgstr "Aktivace konfiguračního snapshotu se nezdařila." msgid "Failed to drill some holes into the model" msgstr "Některé otvory se do modelu nepodařilo se vyvrtat" +msgid "Fan" +msgstr "Ventilátor" + +msgid "Fan KickStart time" +msgstr "Ventilátor Doba spuštění ventilátoru" + +msgid "Fan PWM from 0-100" +msgstr "PWM ventilátoru od 0-100" + msgid "Fan speed" msgstr "Rychlost ventilátoru" msgid "Fan Speed (%)" msgstr "Rychlost ventilátoru (%)" +msgid "Fan speed - default" +msgstr "Rychlost ventilátoru - výchozí" + msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " @@ -2771,15 +3938,24 @@ msgid "" "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" -"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě " -"\"disable_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". " -"Hodnota \"full_fan_speed_layer\" bude ignorována, pokud je nižší než " -"\"disable_fan_first_layers\", v takovém případě se bude ventilátor točit na " -"maximální povolenou hodnotu ve vrstvě \"disable_fan_first_layers\" + 1." +"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě \"disable_fan_first_layers\" " +"na maximum ve vrstvě \"full_fan_speed_layer\". Hodnota \"full_fan_speed_layer\" " +"bude ignorována, pokud je nižší než \"disable_fan_first_layers\", v takovém případě " +"se bude ventilátor točit na maximální povolenou hodnotu ve vrstvě " +"\"disable_fan_first_layers\" + 1." + +msgid "Fan startup delay" +msgstr "Zpoždění spuštění ventilátoru" + +msgid "fan will run by default to %1%%%" +msgstr "ventilátor poběží ve výchozím nastavení na %1%%%" msgid "Fast" msgstr "Rychlý" +msgid "Fast mode" +msgstr "Rychlý mód" + msgid "Fast tilt" msgstr "Rychlý náklon" @@ -2789,6 +3965,9 @@ msgstr "Fatální chyba" msgid "Fatal error, exception catched: %1%" msgstr "Závažná chyba, zachycená výjimka: %1%" +msgid "Feature" +msgstr "Vlastnosti" + msgid "Feature type" msgstr "Typ" @@ -2807,18 +3986,30 @@ msgstr "Průměr filamentu a trysky" msgid "Filament at extruder %1%" msgstr "Filament v extruderu %1%" +msgid "Filament color" +msgstr "Barva vlákna" + +msgid "Filament cost" +msgstr "Cena vlákna" + msgid "Filament Diameter:" msgstr "Průměr filamentu:" msgid "Filament End G-code" msgstr "Filament Konec G-code" +msgid "Filament end G-code" +msgstr "G-Code konce vlákna" + +msgid "Filament Flow calibration" +msgstr "Kalibrace průtoku vlákna" + msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" -"Filament je chlazen pohyby tam a zpět v chladicí trubičce. Zadejte " -"požadovaný počet těchto pohybů." +"Filament je chlazen pohyby tam a zpět v chladicí trubičce. Zadejte požadovaný počet " +"těchto pohybů." msgid "Filament load time" msgstr "Doba zavádění filamentu" @@ -2839,14 +4030,20 @@ msgid "Filament properties" msgstr "Vlastnosti filamentu" msgid "Filament Settings" -msgstr "Nastavení filamentu" +msgstr "Nastavení Filamentu" msgid "Filament Settings Tab" -msgstr "Panel Nastavení filamentu" +msgstr "Panel Nastavení Filamentu" msgid "Filament Start G-code" msgstr "Filament Začátek G-code" +msgid "Filament start G-code" +msgstr "G-Code startu vlákna" + +msgid "Filament temperature calibration" +msgstr "Kalibrace teploty vlákna" + msgid "Filament type" msgstr "Typ filamentu" @@ -2901,15 +4098,30 @@ msgstr "Soubory" msgid "Files association" msgstr "Asociace souborů" +msgid "Fill" +msgstr "Výplně" + msgid "Fill angle" msgstr "Úhel výplně" +msgid "Fill angle increment" +msgstr "Přírůstek úhlu výplně" + msgid "Fill bed" msgstr "Vyplnit podložku" msgid "Fill density" msgstr "Hustota výplně" +msgid "Fill the voids with bridges" +msgstr "Vyplňte mezery mostů" + +msgid "filling horizontal gaps on slopes" +msgstr "vyplnění vodorovných mezer na svazích" + +msgid "Filtering" +msgstr "Filtrování" + msgid "Find" msgstr "Najít" @@ -2940,18 +4152,36 @@ msgstr "prvního" msgid "First layer" msgstr "První vrstva" +msgid "first layer" +msgstr "První vrstva" + +msgid "First layer acceleration" +msgstr "Zrychlení první vrstvy" + msgid "First layer bed temperature" msgstr "Teplota tiskové podložky při první vrstvě" +msgid "First layer calibration" +msgstr "Kalibrace první vrstvy" + msgid "First layer density" msgstr "Hustota první vrstvy" msgid "First layer expansion" msgstr "Rozšíření první vrstvy" +msgid "First layer extruder" +msgstr "Extrudér první vrstvy" + +msgid "First layer flow ratio" +msgstr "Poměr průtoku první vrstvy" + msgid "First layer height" msgstr "Výška první vrstvy" +msgid "First layer height can't be greater than %s" +msgstr "Výška první vrstvy nemůže být větší než %s" + msgid "" "First layer height is not valid.\n" "\n" @@ -2964,11 +4194,17 @@ msgstr "" msgid "First layer nozzle temperature" msgstr "Teplota trysky při první vrstvě" +msgid "First layer spacing" +msgstr "Výška první vrstvy" + msgid "First layer speed" msgstr "Rychlost první vrstvy" msgid "First layer volumetric" -msgstr "Volumetrická hodnota první vrstvy" +msgstr "Objemová hodnota první vrstvy" + +msgid "First layer width" +msgstr "Šířka první vrstvy" msgid "First object layer over raft interface" msgstr "První vrstva objektu nad raftem" @@ -3006,9 +4242,28 @@ msgstr "Plovoucí rezervovaný operand" msgid "Flow" msgstr "Průtok" +msgid "Flow calibration" +msgstr "Kalibrace průtoku" + msgid "Flow rate" msgstr "Průtok" +msgid "Flow ratio" +msgstr "Průtok" + +msgid "" +"Flow ratio to compensate for the gaps in a bridged top surface. Used for " +"ironing infillpattern to prevent regions where the low-flow pass does not " +"provide a smooth surface due to a lack of plastic. You can increase it " +"slightly to pull the top layer at the correct height. Recommended maximum: " +"120%." +msgstr "" +"Poměr průtoku pro kompenzaci mezer v přemostěném horním povrchu. Používá se pro " +"ironing vzor výplně, aby se zabránilo regionům, kde neprochází " +"nízkoprůtokposkytněte hladký povrch kvůli nedostatku plastu. Můžete ho " +"zvětšitmírně, aby se vrchní vrstva vytáhla ve správné výšce. Doporučené maximum: " +"120 %." + msgid "" "Following printer preset is duplicated:%1%The above preset for printer \"%2%" "\" will be used just once." @@ -3049,6 +4304,9 @@ msgstr[1] "Opravy modelů se nezdařily" msgstr[2] "Opravy modelů se nezdařily" msgstr[3] "Opravy modelů se nezdařily" +msgid "Font size" +msgstr "Velikost písma" + msgid "" "For a multipart object, this value isn't accurate.\n" "It doesn't take account of intersections and negative volumes." @@ -3056,6 +4314,9 @@ msgstr "" "Pro vícedílný objekt není tato hodnota přesná.\n" "Nezohledňuje průniky a negativní objemy." +msgid "For more information please visit Prusa wiki page:" +msgstr "Pro více informací navštivte wiki stránku Prusa:" + msgid "For new project all modifications will be reseted" msgstr "U nového projektu budou všechny změny resetovány" @@ -3066,6 +4327,16 @@ msgstr "" "V případě přiléhavých podpor se oblasti podpor sloučí pomocí morfologické " "uzavírací operace. Mezery menší než poloměr uzavření budou vyplněny." +msgid "" +"For stock extruders, usually 40-42mm. For bondtech extruder upgrade, " +"usually 30-32mm. Start with a low value and gradually increase it until " +"strings are gone. If there are blobs on your wipe tower, your value is too " +"high." +msgstr "" +"Pro standardní extrudéry, obvykle 40-42 mm. Pro upgrade extruderu bondtech,obvykle " +"30-32 mm. Začněte s nízkou hodnotou a postupně ji zvyšujte, dokud řetězce jsou " +"pryč. Pokud jsou na vaší stírací věži kapky, vaše hodnota je přílišvysoký." + msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." @@ -3094,37 +4365,55 @@ msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" -"Vynucení plné výplně pro oblasti, které mají menší plochu, než je stanovená " -"prahová hodnota." +"Vynucení plné výplně pro oblasti, které mají menší plochu, než je stanovená prahová " +"hodnota." msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" -"Vynucení vytváření pevných skořepin mezi sousedními materiály/objemy. " -"Užitečné pro tisk s více extrudery s průsvitnými materiály nebo ručně " -"rozpustným podpůrným materiálem." +"Vynucení vytváření pevných skořepin mezi sousedními materiály/objemy. Užitečné pro " +"tisk s více extrudery s průsvitnými materiály nebo ručně rozpustným podpůrným " +"materiálem." msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" -"Pravidlo dopředné kompatibility při načítání konfigurací z konfiguračních " -"souborů a souborů projektů (3MF, AMF)." +"Pravidlo dopředné kompatibility při načítání konfigurací z konfiguračních souborů a " +"souborů projektů (3MF, AMF)." msgid "Found reserved keywords in" msgstr "Nalezená vyhrazená klíčová slova v" +msgid "FreeCAD path" +msgstr "Cesta FreeCAD" + +msgid "FreeCad python script" +msgstr "FreeCad python skript" + +msgid "FreePySCAD : script engine for FreeCAD" +msgstr "FreePySCAD: skriptovací stroj pro FreeCAD" + msgid "from" msgstr "z" msgid "From" msgstr "Předchozí extruder" +msgid "from brim" +msgstr "Od límce" + +msgid "From filament" +msgstr "Filament" + msgid "From Object List You can't delete the last solid part from object." msgstr "Ze seznamu objektů nemůžete smazat poslední část objektu." +msgid "From plane" +msgstr "Z letadla" + msgid "Front" msgstr "Zepředu" @@ -3156,7 +4445,10 @@ msgid "Fuzzy skin type." msgstr "Typ členitého povrchu." msgid "G-code" -msgstr "G-code" +msgstr "G-Code" + +msgid "G-Code" +msgstr "G-Code" msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" @@ -3166,13 +4458,13 @@ msgstr "" "Editace způsobí změny v posuvníku." msgid "G-code file exported to %1%" -msgstr "G-code byl exportován do %1%" +msgstr "G-Code byl exportován do %1%" msgid "G-code flavor" -msgstr "Druh G-code" +msgstr "Druh G-Code" msgid "G-code preview" -msgstr "Náhled G-codu" +msgstr "Náhled G-Code" msgid "G-code resolution" msgstr "G-code rozlišení" @@ -3180,8 +4472,14 @@ msgstr "G-code rozlišení" msgid "G-code substitutions" msgstr "Nahrazení G-codu" +msgid "G-Code to switch from this toolhead" +msgstr "G-Code pro přechod z této nástrojové hlavy" + +msgid "G-Code to switch to this toolhead" +msgstr "G-Code pro přepnutí na tento nástroj" + msgid "G-code viewer" -msgstr "Prohlížeč G-codu" +msgstr "Prohlížeč G-Codu" msgid "g/cm³" msgstr "g/cm³" @@ -3190,19 +4488,52 @@ msgid "g/ml" msgstr "g/ml" msgid "Gap fill" -msgstr "Výplň tenkých stěn" +msgstr "Výplň mezery" + +msgid "Gap Fill" +msgstr "Vyplnit mezery" + +msgid "Gap fill overlap" +msgstr "Překrytí výplně mezery" + +msgid "Gap fill speed" +msgstr "Rychlost výplě mezery" + +msgid "Gapfill after last perimeter" +msgstr "Vyplnit mezery po posledním perimetru" + +msgid "Gcode done" +msgstr "Gcode hotovo" + +msgid "GCode Pre&view Tab" +msgstr "Karta & G-Code Prohližeč" + +msgid "Gcode precision" +msgstr "Přesnost G-Codu" + +msgid "Gcode preview" +msgstr "G-Code Prohlížeč" msgid "General" msgstr "Obecné" +msgid "Generate" +msgstr "Generovat" + +msgid "Generate 10% intervals around current value" +msgstr "Generovat 10% intervaly kolem aktuální hodnoty" + +msgid "Generate 2% intervals below current value" +msgstr "Generovat 2% intervaly pod aktuální hodnotou" + msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" "Nevygenerovat méně než je počet obrysových smyček potřebných ke spotřebování " -"specifikovaného množství filamentu na spodní vrstvu. U strojů s více " -"extrudery platí toto minimum pro každý extruder." +"specifikovaného množství filamentu na spodní vrstvu. U strojů s více extrudery " +"platí toto minimum pro každý extruder." msgid "Generate support material" msgstr "Generovat podpěry" @@ -3213,10 +4544,10 @@ msgid "" "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" -"Vygeneruje podpěry pro zadaný počet vrstev počítaných od spodního okraje, " -"bez ohledu na to, zda jsou povoleny standartní podpěry nebo nikoliv a bez " -"ohledu na jakýkoli prah úhlu. To je užitečné pro získání větší přilnavosti " -"předmětů s velmi tenkou nebo špatnou stopou na tiskové podložce." +"Vygeneruje podpěry pro zadaný počet vrstev počítaných od spodního okraje, bez " +"ohledu na to, zda jsou povoleny standardní podpěry nebo nikoliv a bez ohledu na " +"jakýkoli práh úhlu. To je užitečné pro získání větší přilnavosti předmětů s velmi " +"tenkou nebo špatnou stopou na tiskové podložce." msgid "Generate supports" msgstr "Generovat podpěry" @@ -3227,9 +4558,15 @@ msgstr "Generovat podpěry modelů" msgid "generated warnings" msgstr "generovaná varování" +msgid "Generating brim" +msgstr "Generování límce" + msgid "Generating G-code" msgstr "Generování G-code" +msgid "Generating G-code layer %s / %s" +msgstr "Generování vrstvy G-kódu %s / %s" + msgid "Generating index buffers" msgstr "Generování indexových bufferů" @@ -3239,6 +4576,12 @@ msgstr "Generování podložky" msgid "Generating perimeters" msgstr "Generování perimetrů" +msgid "Generating perimeters: layer %s / %s" +msgstr "Generování perimetrů: vrstva %s / %s" + +msgid "Generating skirt" +msgstr "Generování obrysových smyček" + msgid "Generating skirt and brim" msgstr "Generování obrysu a límce" @@ -3257,6 +4600,15 @@ msgstr "Generování cest nástroje" msgid "Generating vertex buffer" msgstr "Generování vrcholového bufferu" +msgid "" +"Give to the infill algorithm if the infill needs to be connected, and on " +"which perimeters Can be useful for art or with high infill/perimeter " +"overlap. The result may vary between infill types." +msgstr "" +"Pokud je potřeba připojit výplň, dejte na algoritmus výplně a zapnětekteré " +"perimetry mohou být užitečné pro umění nebo s vysokou výplní/perimetrem přesah. " +"Výsledek se může u různých typů výplně lišit." + msgid "Gizmo cut" msgstr "Gizmo řez" @@ -3283,8 +4635,7 @@ msgstr "Gizmo rotace" msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" -"Gizmo rotace: Stiskni pro rotaci vybraných objektů kolem jejich vlastních " -"středů" +"Gizmo rotace: Stiskni pro rotaci vybraných objektů kolem jejich vlastních středů" msgid "Gizmo scale" msgstr "Gizmo měřítko" @@ -3294,8 +4645,8 @@ msgstr "Gizmo měřítko: Stiskem aktivujete změnu velikosti pouze v jednom sm msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" -"Gizmo měřítko: Stiskni pro změnu velikosti vybraných objektů v jejich " -"vlastních středech" +"Gizmo měřítko: Stiskni pro změnu velikosti vybraných objektů v jejich vlastních " +"středech" msgid "Gizmo scale: Press to snap by 5%" msgstr "Gizmo měřítko: Stiskni pro 5% krok" @@ -3327,12 +4678,22 @@ msgstr "Gizma" msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, verze 3" +msgid "Goal:" +msgstr "Cíl:" + msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" -"Je zapotřebí velká přesnost, proto použijte posuvné měřítko (šupleru) a " -"proveďte několik měření po délce filamentu, poté vypočítejte průměr." +"Je zapotřebí velká přesnost, proto použijte posuvné měřítko (šupleru) a proveďte " +"několik měření po délce filamentu, poté vypočítejte průměr." + +msgid "" +"Grey values means that they can't be send to your firmware (no g-code " +"available)." +msgstr "" +"Šedé hodnoty znamenají, že je nelze odeslat do vašeho firmwaru (bez g-kódu k " +"dispozici)." msgid "Grid" msgstr "Mřížka" @@ -3358,12 +4719,29 @@ msgstr "Průnik podpěry do modelu" msgid "Head penetration should not be greater than the head width." msgstr "Průnik hrotu podpěry by neměl být větší než je tloušťka hrotu podpěry." +msgid "" +"Heated build plate temperature for the first layer. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Teplota vyhřívané stavební desky pro první vrstvu. Nastavením nuly deaktivujete " +"postelpříkazy řízení teploty na výstupu." + msgid "Height" msgstr "Výška" msgid "Height (mm)" msgstr "Výška (mm)" +msgid "height in layers" +msgstr "Výška ve vrstvách" + +msgid "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." +msgstr "" +"Výška obrysu vyjádřená ve vrstvách. Nastavte tuto hodnotu vysokou, pro použití " +"obrysu jako stínění proti průvanu." + msgid "Height of the display" msgstr "Výška displeje" @@ -3380,8 +4758,8 @@ msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" -"Ahoj, vítejte v %su! Tento %s vám pomůže se základní konfigurací; jen " -"několik nastavení a budete připraveni tisknout." +"Ahoj, vítejte v %su! Tento %s vám pomůže se základní konfigurací; jen několik " +"nastavení a budete připraveni tisknout." msgid "Help" msgstr "Nápověda" @@ -3392,12 +4770,21 @@ msgstr "Nápověda (pro FFF)" msgid "Help (SLA options)" msgstr "Nápověda (pro SLA)" +msgid "Help / Details:" +msgstr "Nápověda / podrobnosti:" + msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" -"Zde můžete upravit požadovaný objem čištění (mm³) pro kteroukoliv dvojici " -"extruderů." +"Zde můžete upravit požadovaný objem čištění (mm³) pro kteroukoliv dvojici extruderů." + +msgid "" +"Here you can put your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" +"Sem můžete vkládat své osobní poznámky. Tento text bude přidán do G-kóduzáhlaví " +"komentáře." msgid "Hide ruler" msgstr "Skrýt pravítko" @@ -3442,11 +4829,10 @@ msgid "" "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" -"Tvorba dutiny se provádí ve dvou krocích: nejprve se imaginární vnitřní " -"stěna vypočítá hlouběji (offset plus vzdálenost uzavření) v objektu a poté " -"se nafoukne zpět na zadaný offset. Díky větší vzdálenosti uzavření je " -"vnitřek modelu zaoblenější. Při nulové hodnotě se vnitřek modelu nejvíce " -"podobá vnějšku modelu." +"Tvorba dutiny se provádí ve dvou krocích: nejprve se imaginární vnitřní stěna " +"vypočítá hlouběji (offset plus vzdálenost uzavření) v objektu a poté se nafoukne " +"zpět na zadaný offset. Díky větší vzdálenosti uzavření je vnitřek modelu " +"zaoblenější. Při nulové hodnotě se vnitřek modelu nejvíce podobá vnějšku modelu." msgid "Hollowing model" msgstr "Vydutění modelu" @@ -3457,6 +4843,9 @@ msgstr "Změna parametru dutiny" msgid "Honeycomb" msgstr "Plástev" +msgid "horizontal" +msgstr "horizontální" + msgid "Horizontal shells" msgstr "Vodorovné stěny" @@ -3469,6 +4858,24 @@ msgstr "Horizontální posuvník - Pohyb aktivním ukazatelem vlevo" msgid "Horizontal slider - Move active thumb Right" msgstr "Horizontální posuvník - Pohyb aktivním ukazatelem vpravo" +msgid "" +"Horizontal width of the brim that will be printed inside each object on the " +"first layer." +msgstr "" +"Tato vlajka zapíná límec, který bude vytištěn kolem každého objektu při první " +"vrstvě." + +msgid "" +"Horizontal width of the skirt that will be printed around each object. If " +"left as zero, first layer extrusion width will be used if set and the skirt " +"is only 1 layer height, or perimeter extrusion width will be used (using the " +"computed value if not set)." +msgstr "" +"Horizontální šířka sukně, která bude vytištěna kolem každého předmětu.necháno jako " +"nula, použije se šířka vysunutí první vrstvy, pokud je nastavena a sukněje pouze 1 " +"výška vrstvy, nebo se použije obvodová šířka vysunutí (pomocí vypočítaná hodnota, " +"pokud není nastavena)." + msgid "Host" msgstr "Server" @@ -3497,9 +4904,61 @@ msgstr "Jak hluboko mají spojky proniknou do modelu." msgid "How much the pinhead has to penetrate the model surface" msgstr "Jak moc hrot podpěry pronikne do povrchu modelu" +msgid "" +"How much the supports should lift up the supported object. If this value is " +"zero, the bottom of the model geometry will be considered as part of the pad." +"If \"Pad around object\" is enabled, this value is ignored." +msgstr "" +"Jak moc by podpěry měly zvednout podepřený objekt. Pokud je tato hodnota nula, " +"spodní část geometrie modelu bude považována za součást podložky.Pokud je povoleno " +"\"Pad around object\", tato hodnota je ignorována." + msgid "How to apply limits" msgstr "Uplatnění limitů" +msgid "" +"How to apply the Machine Limits.\n" +"* In every case, they will be used as safeguards: Even if you use a print " +"profile that sets an acceleration of 5000, if in your machine limits the " +"acceleration is 4000, the outputted gcode will use the 4000 limit.\n" +"* You can also use it as a safeguard and to have a better printing time " +"estimate.\n" +"* You can also use it as a safeguard, to have a better printing time " +"estimate and emit the limits at the begining of the gcode file, with M201 " +"M202 M203 M204 and M205 commands. If you want only to write a sub-set, " +"choose the 'for time estimate' option and write your own gcodes in the " +"custom gcode section." +msgstr "" +"Jak použít omezení stroje.\n" +"* V každém případě budou použity jako ochrana: I když použijete tiskprofil, který " +"nastavuje zrychlení na 5000, pokud ve vašem stroji omezuje zrychlení je 4000, " +"vydaný kód gcode použije limit 4000.\n" +"* Můžete jej také použít jako ochranu a pro kratší dobu tiskuodhad.\n" +"* Můžete to také použít jako ochranu, abyste měli lepší čas tiskuodhadnout a " +"odeslat limity na začátku souboru gcode s M201Příkazy M202 M203 M204 a M205. Pokud " +"chcete zapsat pouze podmnožinu, vyberte možnost pro časový odhad a napište své " +"vlastní gcodes do vlastní sekce gcode." + +msgid "" +"How to compute the vertical z-distance.\n" +"From filament: it uses the nearest bit of the filament. When a bridge is " +"extruded, it goes below the current plane.\n" +"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is " +"extruded.\n" +"None: No z-offset. Useful for Soluble supports.\n" +msgstr "" +"Jak vypočítat vertikální z-vzdálenost.\n" +"Z vlákna: používá nejbližší kousek vlákna. Když je můstekvytlačený, jde pod " +"aktuální rovinu.\n" +"Z roviny: používá rovinu-z. Stejné jako z vlákna, pokud není mostextrudovaný.\n" +"Žádný: Bez posunu z. Užitečné pro solubilní podpory.\n" + +msgid "How to use the FreeCad python script window." +msgstr "Jak používat okno skriptu FreeCad python." + +msgid "How to use this menu and calibrations." +msgstr "Jak používat toto menu a kalibrace." + msgid "HTTP digest" msgstr "HTTP digest" @@ -3517,8 +4976,11 @@ msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"Soubor HTTPS CA je volitelný. Je nutný pouze pokud použijte HTTPS certifikát " -"s vlastním podpisem." +"Soubor HTTPS CA je volitelný. Je nutný pouze pokud použijte HTTPS certifikát s " +"vlastním podpisem." + +msgid "Hyperbola" +msgstr "Hyperbola" msgid "Icon size in a respect to the default size" msgstr "Velikost ikon vůči výchozí velikosti" @@ -3526,14 +4988,50 @@ msgstr "Velikost ikon vůči výchozí velikosti" msgid "ID" msgstr "ID" +msgid "" +"Ideally, the spacing between two extrusions shouldn't be lower than the " +"nozzle diameter. Below are the extrusion widths for a spacing equal to the " +"nozzle diameter.\n" +msgstr "" +"V ideálním případě by vzdálenost mezi dvěma výstupky neměla být menší než průměr " +"trysky. Níže jsou uvedeny šířky vytlačování pro rozteč rovnající se průměr trysky.\n" + +msgid "idx" +msgstr "idx" + +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width." +msgstr "" +"Pokud musí být potištěn horní povrch a je částečně pokryt jinou vrstvou, nebude " +"uvažována v horní vrstvě, kde je její šířka pod touto hodnotou. To může být " +"užitečné k tomu, aby se jeden perimetr nahoře spustil plocha, která by měla být " +"pokryta pouze perimetry. Tato hodnota může být mm nebo % šířky obvodového vysunutí." + +msgid "" +"If activated, at the end of each layer, the printer will switch to a milling " +"head and mill the external perimeters.\n" +"You should set the 'Milling extra XY size' to a value high enough to have " +"enough plastic to mill. Also, be sure that your piece is firmly glued to the " +"bed." +msgstr "" +"Pokud je aktivována, na konci každé vrstvy se tiskárna přepne na frézováníhlavu a " +"frézu na vnější perimetry.\n" +"Měli byste nastavit 'Frézování extra XY velikosti' na hodnotu dostatečně vysokou, " +"abyste měli dost plastu na frézování. Také se ujistěte, že je váš kus pevně " +"přilepen k postel." + msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" "Pokud je zaškrtnuto, budou podpěry generovány automaticky na základě prahové " -"hodnoty převisu. Pokud není zaškrtnuto, bude podpěra generována pouze v " -"místech, kde je umístěn objekt pro \"Vynucení podpěr\"." +"hodnoty převisu. Pokud není zaškrtnuto, bude podpěra generována pouze v místech, " +"kde je umístěn objekt pro \"Vynucení podpěr\"." msgid "" "If enabled, %s checks for new application versions online. When a new " @@ -3541,10 +5039,10 @@ msgid "" "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" -"Pokud je povoleno, kontroluje %s nově dostupné verze. V případě, že je nová " -"verze k dispozici, zobrazí se notifikace při dalším startu programu (nikdy " -"během užívání aplikace). Tento systém slouží pouze pro upozornění uživatele, " -"nedochází k automatické instalaci." +"Pokud je povoleno, kontroluje %s nově dostupné verze. V případě, že je nová verze k " +"dispozici, zobrazí se notifikace při dalším startu programu (nikdy během užívání " +"aplikace). Tento systém slouží pouze pro upozornění uživatele, nedochází k " +"automatické instalaci." msgid "" "If enabled, %s downloads updates of built-in system presets in the " @@ -3553,8 +5051,8 @@ msgid "" "startup." msgstr "" "Pokud je povoleno, stáhne %s na pozadí aktualizace vestavěných systémových " -"přednastavení. Tyto aktualizace jsou staženy do dočasného umístění. Pokud je " -"k dispozici nové přednastavení, zobrazí se upozornění při startu programu." +"přednastavení. Tyto aktualizace jsou staženy do dočasného umístění. Pokud je k " +"dispozici nové přednastavení, zobrazí se upozornění při startu programu." msgid "If enabled, a repetition of the next random color will be allowed." msgstr "Pokud je povoleno, bude povoleno opakování další náhodné barvy." @@ -3563,15 +5061,15 @@ msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" -"Pokud je tato možnost povolena, všechny tiskové extrudery na začátku tisku " -"vytlačí na předním okraji podložky malé množství materiálu." +"Pokud je tato možnost povolena, všechny tiskové extrudery na začátku tisku vytlačí " +"na předním okraji podložky malé množství materiálu." msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" -"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z " -"disku“ automaticky vyhledat a načíst soubory." +"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z disku“ " +"automaticky vyhledat a načíst soubory." msgid "" "If enabled, allows the Reload from disk command to automatically find and " @@ -3579,10 +5077,10 @@ msgid "" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" -"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z " -"disku“ automaticky vyhledat a načíst soubory.\n" -"Pokud není povoleno, funkce „Znovu načíst z disku“ požádá o zadání cest ke " -"každému souboru pomocí dialogového okna." +"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z disku“ " +"automaticky vyhledat a načíst soubory.\n" +"Pokud není povoleno, funkce „Znovu načíst z disku“ požádá o zadání cest ke každému " +"souboru pomocí dialogového okna." msgid "" "If enabled, application will use the standard Windows system menu,\n" @@ -3598,8 +5096,8 @@ msgid "" "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" -"Pokud je povoleno, pohyby sekvenčního posuvníku v náhledu gcodu se aplikují " -"pouze na horní vrstvu. Pokud je zakázáno, aplikují se na celý gcode." +"Pokud je povoleno, pohyby sekvenčního posuvníku v náhledu G-codu se aplikují pouze " +"na horní vrstvu. Pokud je zakázáno, aplikují se na celý G-code." msgid "If enabled, PrusaSlicer will be open at the position it was closed" msgstr "" @@ -3621,12 +5119,24 @@ msgstr "Pokud je povoleno, vykreslí objekt za pomoci mapy prostředí." msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "Pokud je povoleno, při zoomu obrátí funkci kolečka myši" -msgid "" -"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " -"will be used." +msgid "If enabled, sets %1% as default application to open .gcode files." msgstr "" -"Pokud je tato možnost povolena, budou karty Nastavení umístěny jako položky " -"nabídky. Pokud je zakázáno, bude použito původní uživatelské rozhraní." +"Pokud je povoleno, nastaví %1% jako výchozí aplikaci pro otevírání souborů .gcode." + +msgid "If enabled, sets Slic3r as default application to open .3mf files." +msgstr "" +"Pokud je povoleno, nastaví Slic3r jako výchozí aplikaci pro otevírání souborů .3mf." + +msgid "If enabled, sets Slic3r as default application to open .stl files." +msgstr "" +"Pokud je povoleno, nastaví Slic3r jako výchozí aplikaci pro otevírání souborů .stl." + +msgid "" +"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " +"will be used." +msgstr "" +"Pokud je tato možnost povolena, budou karty Nastavení umístěny jako položky " +"nabídky. Pokud je zakázáno, bude použito původní uživatelské rozhraní." msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " @@ -3634,17 +5144,16 @@ msgid "" "When a new preset version becomes available it is offered at application " "startup." msgstr "" -"Pokud je povoleno, stáhne Slic3r na pozadí aktualizace vestavěných " -"systémových přednastavení. Tyto aktualizace jsou staženy do dočasného " -"umístění. Pokud je k dispozici nové přednastavení, zobrazí se upozornění při " -"startu programu." +"Pokud je povoleno, stáhne Slic3r na pozadí aktualizace vestavěných systémových " +"přednastavení. Tyto aktualizace jsou staženy do dočasného umístění. Pokud je k " +"dispozici nové přednastavení, zobrazí se upozornění při startu programu." msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" -"Pokud je tato volba povolena, bude 3D scéna vykreslena v rozlišení Retina. " -"Pokud dochází k potížím s výkonem, zkuste tuto volbu vypnout." +"Pokud je tato volba povolena, bude 3D scéna vykreslena v rozlišení Retina. Pokud " +"dochází k potížím s výkonem, zkuste tuto volbu vypnout." msgid "" "If enabled, the axes names and axes values will be colorized according to " @@ -3660,12 +5169,28 @@ msgstr "" "Pokud je povoleno, bude v pravém horním rohu 3D scény zobrazeno tlačítko pro " "ovládání bočního panelu" +msgid "" +"If enabled, the command line arguments are sent to an existing instance of " +"GUI Slic3r, or an existing Slic3r window is activated. Overrides the " +"\"single_instance\" configuration value from application preferences." +msgstr "" +"Pokud je povoleno, argumenty příkazového řádku se odesílají do existující instance " +"GUI Slic3r nebo existující okno Slic3r je aktivováno. Přepíše Hodnota konfigurace" +"\"single_instance\" z předvoleb aplikace." + +msgid "" +"If enabled, the gui will be in expert mode even if the simple or advanced " +"mode is selected (but not the setting tabs)." +msgstr "" +"Pokud je povoleno, gui bude v expertním režimu, i když jednoduchý nebo pokročilýje " +"vybrán režim (ale ne karty nastavení)." + msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" -"Pokud je povoleno, je dialogové okno nastavení pro starší zařízení " -"3DConnexion k dispozici stisknutím kombinace kláves CTRL + M" +"Pokud je povoleno, je dialogové okno nastavení pro starší zařízení 3DConnexion k " +"dispozici stisknutím kombinace kláves CTRL + M" msgid "" "If enabled, the wipe tower will not be printed on layers with no " @@ -3673,10 +5198,9 @@ msgid "" "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"Pokud je tato možnost povolena, nebude čistící věž vytištěna ve vrstvách bez " -"změny barvy. U vrstev s výměnou sjede extruder směrem dolů a vytiskne vrstvu " -"čistící věže. Uživatel je odpovědný za to, že nedojde ke kolizi tiskové " -"hlavy s tiskem." +"Pokud je tato možnost povolena, nebude čistící věž vytištěna ve vrstvách bez změny " +"barvy. U vrstev s výměnou sjede extruder směrem dolů a vytiskne vrstvu čistící " +"věže. Uživatel je odpovědný za to, že nedojde ke kolizi tiskové hlavy s tiskem." msgid "" "If enabled, UI will use Dark mode colors. If disabled, old UI will be used." @@ -3686,14 +5210,14 @@ msgstr "" msgid "If enabled, use free camera. If not enabled, use constrained camera." msgstr "" -"Pokud je zaškrtnuto, použije „free kameru“. Pokud není, použije " -"„constrained kameru“." +"Pokud je zaškrtnuto, použije „volnou kameru“. Pokud není, použije „omezenou " +"kameru“." msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" -"Pokud je zaškrtnuto, použije perspektivní kameru. Pokud není, použije " -"ortografickou kameru." +"Pokud je zaškrtnuto, použije perspektivní kameru. Pokud není, použije ortografickou " +"kameru." msgid "If enabled, useful hints are displayed at startup." msgstr "" @@ -3712,15 +5236,84 @@ msgstr "" "objemů a Modifikátorů. Jeden z modelů však musí být na prvním místě." msgid "If enabled, you can change size of toolbar icons manually." +msgstr "Pokud je zaškrtnuto, můžete nastavit velikost ikon na panelu nástrojů." + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum for all infill print moves of the first layer.\n" +"If expressed as a percentage it will scale the current infill speed.\n" +"Set it at 100% to remove any infill first layer speed modification.\n" +"Set zero to disable (using first_layer_speed instead)." msgstr "" -"Pokud je zaškrtnuto, můžete nastavit velikost ikon na panelu nástrojů." +"Pokud je vyjádřena jako absolutní hodnota v mm/s, bude tato rychlost použita jako " +"maximum pro všechny výplňové tiskové pohyby první vrstvy.\n" +"Pokud je vyjádřeno v procentech, změní se aktuální rychlost výplně.\n" +"Nastavte jej na 100 %, abyste odstranili jakoukoli úpravu rychlosti první vrstvy " +"výplně.\n" +"Nastavte nulu na zakázání (místo toho použijte rychlost_první_vrstvay)." + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum to all the print moves (but infill) of the first layer.\n" +"If expressed as a percentage it will scale the current speed.\n" +"Set it at 100% to remove any first layer speed modification (but for infill)." +msgstr "" +"Pokud je vyjádřena jako absolutní hodnota v mm/s, bude tato rychlost použita jako " +"maximálně na všechny tiskové pohyby (kromě výplně) první vrstvy.\n" +"Pokud je vyjádřeno v procentech, změní se aktuální rychlost.\n" +"Nastavte jej na 100 % abyste odstranili jakoukoli úpravu rychlosti první vrstvy " +"(ale pro výplň)." + +msgid "" +"If it point to a valid freecad instance (the bin directory or the python " +"executable), you can use the built-in python script to quickly generate " +"geometry." +msgstr "" +"Pokud ukazuje na platnou instanci freecadu (adresář bin nebo python spustitelný, " +"můžete použít vestavěný skript python k rychlému vygenerování geometrie." + +msgid "" +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the default and " +"maximum speeds.\n" +"Set zero to disable." +msgstr "" +"Pokud je doba tisku vrstvy odhadována pod tento počet sekund, ventilátor bude " +"povoleno a jeho rychlost bude vypočítána interpolací výchozího nastavení a " +"maximální rychlosti.\n" +"Nastavit nulu pro zakázání." + +msgid "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value, if possible.\n" +"Set zero to disable." +msgstr "" +"Pokud se doba tisku vrstvy odhaduje pod tento počet sekund, tisk se posunerychlost " +"bude zmenšena, aby se doba trvání prodloužila na tuto hodnotu, pokud je to možné.\n" +"Nastavit nulu pro zakázání." + +msgid "" +"If the perimeter overlap is set at 100%, the yellow areas should be filled " +"by the overlap.\n" +"If overlap is at 0%, width = spacing." +msgstr "" +"Pokud je překrytí perimetru nastaveno na 100 %, žluté oblasti by měly být " +"vyplněnypřekrytím.\n" +"Pokud je překrytí 0 %, šířka = mezera." + +msgid "" +"If this is enabled, fan will continuously run at base speed if no other " +"setting overrides that speed. Useful for PLA, harmful for ABS." +msgstr "" +"Pokud je toto povoleno, ventilátor poběží nepřetržitě základní rychlostí, pokud " +"žádná jinánastavení přepíše tuto rychlost. Užitečné pro PLA, škodlivé pro ABS." msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" -"Pokud je tato možnost povolena, Slic3r bude automaticky centrovat objekty " -"kolem středu tiskové plochy." +"Pokud je tato možnost povolena, Slic3r bude automaticky centrovat objekty kolem " +"středu tiskové plochy." msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " @@ -3729,38 +5322,56 @@ msgstr "" "Pokud je tato možnost povolena, Slic3r předprojektuje objekty, jakmile budou " "načteny, aby šetřil čas při exportu G-code." +msgid "" +"If this is enabled, Slic3r will prompt for when overwriting files from save " +"dialogs." +msgstr "" +"Pokud je toto povoleno, Slic3r zobrazí výzvu k přepsání souborů z uloženídialogy." + msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" -"Pokud je tato volba povolena, Slic3r vyvolá poslední výstupní adresář " -"namísto toho, který obsahuje vstupní soubory." +"Pokud je tato volba povolena, Slic3r vyvolá poslední výstupní adresář namísto toho, " +"který obsahuje vstupní soubory." + +msgid "" +"If this is enabled, when starting Slic3r and another instance of the same " +"Slic3r is already running, that instance will be reactivated instead." +msgstr "" +"Pokud je toto povoleno, při spuštění Slic3r a další instance stejného Slic3r již " +"běží, tato instance bude místo toho znovu aktivována." + +msgid "" +"If you have some problem with the 'Only one perimeter on Top surfaces' " +"option, you can try to activate this on the problematic layer." +msgstr "" +"Pokud máte nějaký problém s 'Pouze jeden perimetr na horních plochách'možnost, " +"můžete to zkusit aktivovat na problematické vrstvě." msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" -"Zadáním kladné hodnoty, se Z rychle přizvedne při každém vyvolání retrakce. " -"Při použití více extruderů bude použito pouze nastavení pro první extruder." +"Zadáním kladné hodnoty, se Z rychle přizvedne při každém vyvolání retrakce. Při " +"použití více extruderů bude použito pouze nastavení pro první extruder." msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" -"Zadáním kladné hodnoty se zdvih Z uskuteční pouze nad zadanou absolutní " -"hodnotou Z. Toto nastavení můžete zvolit pro přeskočení přizvednutí u " -"prvních vrstev." +"Zadáním kladné hodnoty se zdvih Z uskuteční pouze nad zadanou absolutní hodnotou Z. " +"Toto nastavení můžete zvolit pro přeskočení přizvednutí u prvních vrstev." msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" -"Zadáním kladné hodnoty se zdvih Z uskuteční pouze pod zadanou absolutní " -"hodnotou Z. Toto nastavení můžete zvolit pro přeskočení přizvednutí u " -"prvních vrstev." +"Zadáním kladné hodnoty se zdvih Z uskuteční pouze pod zadanou absolutní hodnotou Z. " +"Toto nastavení můžete zvolit pro přeskočení přizvednutí u prvních vrstev." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -3769,10 +5380,10 @@ msgid "" "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" -"Pokud chcete zpracovat výstupní G-code pomocí vlastních skriptů, stačí zde " -"uvést jejich absolutní cesty. Oddělte více skriptů středníkem. Skripty " -"předají absolutní cestu k souboru G-code jako první argument a mohou " -"přistupovat k nastavení konfigurace Slic3ru čtením proměnných prostředí." +"Pokud chcete zpracovat výstupní G-code pomocí vlastních skriptů, stačí zde uvést " +"jejich absolutní cesty. Oddělte více skriptů středníkem. Skripty předají absolutní " +"cestu k souboru G-code jako první argument a mohou přistupovat k nastavení " +"konfigurace Slic3ru čtením proměnných prostředí." msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" @@ -3780,17 +5391,34 @@ msgid "" "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" -"Pokud firmware nezpracovává umístění extruderu správně, potřebujete aby to " -"vzal G-code v úvahu. Toto nastavení umožňuje určit odsazení každého " -"extruderu vzhledem k prvnímu. Očekávají se pozitivní souřadnice (budou " -"odečteny od souřadnice XY)." +"Pokud firmware nezpracovává umístění extruderu správně, potřebujete aby to vzal G-" +"code v úvahu. Toto nastavení umožňuje určit odsazení každého extruderu vzhledem k " +"prvnímu. Očekávají se pozitivní souřadnice (budou odečteny od souřadnice XY)." msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" -"Pokud váš firmware vyžaduje relativní hodnoty E, zaškrtněte toto, jinak " -"nechte nezaškrtnuté. Většina firmwarů používá absolutní hodnoty." +"Pokud váš firmware vyžaduje relativní hodnoty E, zaškrtněte toto, jinak nechte " +"nezaškrtnuté. Většina firmwarů používá absolutní hodnoty." + +msgid "" +"If your firmware stops while printing, it may have its gcode queue full. Set " +"this parameter to merge extrusions into bigger ones to reduce the number of " +"gcode commands the printer has to process each second.\n" +"On 8bit controlers, a value of 150 is typical.\n" +"Note that reducing your printing speed (at least for the external " +"extrusions) will reduce the number of time this will triggger and so " +"increase quality.\n" +"Set zero to disable." +msgstr "" +"Pokud se váš firmware během tisku zastaví, může mít frontu gcode plnou. Set tento " +"parametr pro sloučení vysunutí do větších, aby se snížil počet příkazy gcode, které " +"musí tiskárna každou sekundu zpracovat.\n" +"U 8bitových ovladačů je typická hodnota 150.\n" +"Všimněte si, že snížení rychlosti tisku (alespoň pro vnější extruze) zkrátí dobu, " +"po kterou se to spustí, a tak zvýšit kvalitu.\n" +"Nastavit nulu pro zakázání." msgid "Ignore HTTPS certificate revocation checks" msgstr "Ignorování kontrol revokace HTTPS certifikátu" @@ -3810,6 +5438,12 @@ msgstr "Ignorovat neexistující konfigurační soubory" msgid "Ignores facets facing away from the camera." msgstr "Ignoruje fasety směřující pryč od kamery." +msgid "Illegal characters" +msgstr "Zakázané znaky" + +msgid "Illegal characters for filename" +msgstr "Neplatné znaky pro název souboru" + msgid "Illegal instruction" msgstr "Nepovolený příkaz" @@ -3855,6 +5489,12 @@ msgstr "Import opraveného 3MF souboru selhal" msgid "Import profile only" msgstr "Importovat pouze profil" +msgid "Import Prusa Config" +msgstr "Importovat Konfiguraci" + +msgid "Import Prusa Config Bundle" +msgstr "Exportovat Konfigurační Balík" + msgid "Import SL1 / SL1S Archive" msgstr "Importovat SL1 / SL1S Archiv" @@ -3867,6 +5507,9 @@ msgstr "Importovat STL (imperiální jednotky)" msgid "Import STL/OBJ/AM&F/3MF" msgstr "Importovat STL/OBJ/AM&F/3MF" +msgid "Import STL/OBJ/AMF/3MF without config, keep platter" +msgstr "Importovat STL/OBJ/AMF/3MF bez konfigurace, ponechat talíř" + msgid "Importing canceled." msgstr "Import zrušen." @@ -3877,7 +5520,37 @@ msgid "Importing SLA archive" msgstr "Importuje se SLA archiv" msgid "in" -msgstr "in" +msgstr "v" + +msgid "" +"In sloping areas, when you have a number of top / bottom solid layers and " +"few perimeters, it may be necessary to put some solid infill above/below " +"the perimeters to fulfill the top/bottom layers criteria.\n" +"By setting this to something higher than 0, you can control this behaviour, " +"which might be desirable if \n" +"undesirable solid infill is being generated on slopes.\n" +"The number set here indicates the number of layers between the inside of the " +"part and the air at and beyond which solid infill should no longer be added " +"above/below. If this setting is equal or higher than the top/bottom solid " +"layer count, it won't do anything. If this setting is set to 1, it will " +"evict all solid fill above/below perimeters. \n" +"Set zero to disable.\n" +"!! ensure_vertical_shell_thickness needs to be activated so this algorithm " +"can work !!." +msgstr "" +"V šikmých oblastech, když máte několik horních / spodních plných vrstev a málo " +"perimetrů, může být nutné dát nějakou pevnou výplň nad/pod perimetry pro splnění " +"kritérií horní/spodní vrstvy.\n" +"Pokud toto nastavíte na něco vyššího než 0, můžete toto chování ovládat,což by " +"mohlo být žádoucí, pokud \n" +"na svazích se vytváří nežádoucí pevná výplň.\n" +"Číslo zde nastavené udává počet vrstev mezi vnitřkem část a vzduch, na který a za " +"nímž by se již neměla přidávat pevná výplňnad/pod. Pokud je toto nastavení stejné " +"nebo vyšší než horní/dolní plné počet vrstev, nic to neudělá. Pokud je toto " +"nastavení nastaveno na 1, vykliďte veškerou pevnou výplň nad/pod perimetry. \n" +"Nastavit nulu pro zakázání.\n" +"!! secure_vertical_shell_thickness musí být aktivován, takže tento algoritmus může " +"fungovat!!." msgid "In the custom G-code were found reserved keywords:" msgstr "Ve vlastním G-kódu byla nalezena vyhrazená klíčová slova:" @@ -3885,6 +5558,9 @@ msgstr "Ve vlastním G-kódu byla nalezena vyhrazená klíčová slova:" msgid "In this mode you can select only other %s Items%s" msgstr "V tomto režimu můžete vybrat pouze jinou/jiný %s %s" +msgid "In vase mode (no seam)" +msgstr "V režimu vázy (bez švu)" + msgid "Inches" msgstr "Palce" @@ -3903,6 +5579,9 @@ msgstr "Přidání Instancí" msgid "Increase/decrease edit area" msgstr "Zvětšit / zmenšit oblast úprav" +msgid "increment" +msgstr "Přírůstek" + msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" @@ -3911,15 +5590,15 @@ msgid "" msgstr "" "indikuje, že některá nastavení byla změněna a nejsou shodná se systémovými " "(výchozími) hodnotami pro danou skupinu nastavení.\n" -"Klikněte na ikonu ODEMKNUTÉHO ZÁMKU pro reset všech nastavení aktuální " -"skupiny nastavení na systémové (nebo výchozí) hodnoty." +"Klikněte na ikonu ODEMKNUTÉHO ZÁMKU pro reset všech nastavení aktuální skupiny " +"nastavení na systémové (nebo výchozí) hodnoty." msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" -"indikuje, že nastavení jsou stejná jako systémové (výchozí) hodnoty pro " -"aktuální skupinu nastavení" +"indikuje, že nastavení jsou stejná jako systémové (výchozí) hodnoty pro aktuální " +"skupinu nastavení" msgid "" "indicates that the settings were changed and are not equal to the last saved " @@ -3927,8 +5606,8 @@ msgid "" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" -"indikuje, že došlo ke změně nastavení, které není shodné s naposledy " -"uloženým přednastavením pro aktuální skupinu nastavení.\n" +"indikuje, že došlo ke změně nastavení, které není shodné s naposledy uloženým " +"přednastavením pro aktuální skupinu nastavení.\n" "Klikněte na ikonu ŠIPKY ZPĚT pro reset všech nastavení pro aktuální skupinu " "nastavení na naposledy uložené přednastavení." @@ -3936,14 +5615,41 @@ msgid "Infill" msgstr "Výplň" msgid "infill" -msgstr "výplň" +msgstr "Výplň" + +msgid "Infill acceleration" +msgstr "Zrychlení výplně" msgid "Infill before perimeters" msgstr "Tisknout výplň před tiskem perimetrů" +msgid "Infill bridges" +msgstr "Výplň mostů" + +msgid "Infill bridges fan speed" +msgstr "Rychlost ventilátoru výplní mostů" + msgid "Infill extruder" msgstr "Extruder pro výplň" +msgid "Infill max first layer speed" +msgstr "Max rychlost vyplnění první vrstvy" + +msgid "Infill spacing" +msgstr "Mezery výplně" + +msgid "Infill speed" +msgstr "Rychlost výplně" + +msgid "Infill width" +msgstr "Šířka výplně" + +msgid "Infill/perimeters encroachment" +msgstr "Přesah pro výplně/perimetry" + +msgid "Infilling layer %s / %s" +msgstr "Vyplňování vrstvy %s / %s" + msgid "Infilling layers" msgstr "Generování výplně vrstev" @@ -3965,9 +5671,15 @@ msgstr "Doba počátečního osvitu" msgid "Initial layer height" msgstr "Výška první vrstvy" +msgid "Inner" +msgstr "Vnitřní" + msgid "Inner brim only" msgstr "Pouze vnitřní límec" +msgid "Inner XY size compensation" +msgstr "Vnitřní kompenzace velikosti XY" + msgid "Input value is out of range" msgstr "Zadaná hodnota je mimo rozsah" @@ -3978,6 +5690,9 @@ msgstr "" "Vstupní hodnota je mimo povolený rozsah\n" "Jste si jisti, že %s je správná hodnota a že chcete pokračovat?" +msgid "Insertion distance" +msgstr "Vzdálenost vložení" + msgid "Inspect / activate configuration snapshots" msgstr "Zkontrolovat / aktivovat zálohy konfigurace" @@ -3996,6 +5711,9 @@ msgstr "Instance" msgid "Instances to Separated Objects" msgstr "Změna instance na samostatný objekt" +msgid "Interface" +msgstr "Kontaktní vrstvy" + msgid "Interface loops" msgstr "Kontaktní smyčky" @@ -4005,6 +5723,24 @@ msgstr "Rozteč kontaktních vrstev" msgid "Interface shells" msgstr "Mezilehlé stěny" +msgid "Interior Brim width" +msgstr "Vnitřní šířka límce" + +msgid "Internal" +msgstr "Vnitřní" + +msgid "Internal bridge infill" +msgstr "Vnitřní výplň mostu" + +msgid "Internal bridge speed" +msgstr "Vnitřní rychlost mostu" + +msgid "Internal bridges " +msgstr "Vnitřní mosty " + +msgid "Internal bridges" +msgstr "Vnitřní mosty" + msgid "internal error" msgstr "interní chyba" @@ -4014,6 +5750,30 @@ msgstr "Vnitřní chyba: %1%" msgid "Internal infill" msgstr "Vnitřní výplň" +msgid "Internal perimeter" +msgstr "Vnitřní perimetr" + +msgid "Internal perimeters speed" +msgstr "Rychlost vnitřních perimetrů" + +msgid "" +"Internal perimeters will go around sharp corners by turning around instead " +"of making the same sharp corner. This can help when there are visible holes " +"in sharp corners on perimeters. It also help to print the letters on the " +"benchy stern.\n" +"Can incur some more processing time, and corners are a bit less sharp." +msgstr "" +"Vnitřní perimetry budou obcházet ostré rohy tím, že se místo toho otočívytvoření " +"stejného ostrého rohu. To může pomoci, když jsou viditelné díryv ostrých rozích na " +"perimetrech. Pomáhá také tisknout písmena na lavičková záď.\n" +"Může trvat delší dobu zpracování a rohy jsou o něco méně ostré." + +msgid "Internal resolution" +msgstr "Interní rozlišení" + +msgid "Introduction" +msgstr "Úvod" + msgid "Invalid data" msgstr "Neplatná data" @@ -4033,8 +5793,7 @@ msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" -"Neplatný vstupní formát. Očekává se vektor rozměrů v následujícím formátu: " -"\"%1%\"" +"Neplatný vstupní formát. Očekává se vektor rozměrů v následujícím formátu: \"%1%\"" msgid "Invalid numeric input." msgstr "Neplatný číselný vstup." @@ -4048,8 +5807,32 @@ msgstr "Průměr hrotu podpěry je neplatný" msgid "Ironing" msgstr "Ironing" +msgid "Ironing angle" +msgstr "Úhel ironing" + +msgid "Ironing angle. if negative, it will use the fill angle." +msgstr "Úhel ironing. je-li záporný, použije úhel výplně." + +msgid "Ironing flow distribution" +msgstr "Rozdělení proudu ironing" + +msgid "Ironing infill pattern tuning" +msgstr "Ladění vzoru výplně ironing" + +msgid "Ironing pattern calibration" +msgstr "Kalibrace vzoru ironing" + +msgid "Ironing post-process (This will go on top of infills and perimeters)" +msgstr "Následný proces ironing (bude pokračovat na výplních a perimetrech)" + +msgid "Ironing speed" +msgstr "Rychlost ironing" + msgid "Ironing Type" -msgstr "Způsob vyhlazování" +msgstr "Způsob Ironing" + +msgid "Ironing width" +msgstr "Šířka ironing" msgid "is licensed under the" msgstr "je licencován pod" @@ -4068,9 +5851,9 @@ msgid "" "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"Může být užitečné zvýšit proud motoru extruderu během sekvence výměny " -"filamentu, aby se umožnily vysoké rychlosti zavádění filamentu a aby se " -"překonal odpor při zavádění filamentu s ošklivě tvarovanou špičkou." +"Může být užitečné zvýšit proud motoru extruderu během sekvence výměny filamentu, " +"aby se umožnily vysoké rychlosti zavádění filamentu a aby se překonal odpor při " +"zavádění filamentu s ošklivě tvarovanou špičkou." msgid "It's a last preset for this physical printer." msgstr "Toto je poslední přednastavení pro tuto fyzickou tiskárnu." @@ -4081,12 +5864,29 @@ msgstr "SLA technologií nelze tisknout vícedílné objekty." msgid "It's not possible to delete the last related preset for the printer." msgstr "Není možné odstranit poslední související přednastavení tiskárny." +msgid "" +"It's not possible to use a bigger value for the brim offset than the brim " +"width, as it won't extrude anything. Brim offset have to be lower than the " +"brim width." +msgstr "" +"Není možné použít větší hodnotu pro odsazení okraje než okrajšířka, protože nebude " +"nic vytlačovat. Odsazení okraje musí být nižší než šířka okraje." + msgid "Jerk limits" -msgstr "Ryv limity" +msgstr "Jerk (Ryv) limity" msgid "Jitter" msgstr "Rozkmit (Jitter)" +msgid "" +"Join the perimeters to create only one continuous extrusion without any z-" +"hop. Long inside travel (from external to holes) are not extruded to give " +"some space to the infill." +msgstr "" +"Spojte perimetry, abyste vytvořili pouze jedno souvislé vysunutí bez jakéhokoli z-" +"hop. Dlouhé vnitřní dráhy (od vnějších k otvorům) nejsou vytlačovány, aby nějaký " +"prostor k výplni." + msgid "Jump to height" msgstr "Přechod do výšky" @@ -4115,6 +5915,9 @@ msgstr "Pouze se přepnout do profilu \"%1%\"" msgid "Keep" msgstr "Ponechat" +msgid "Keep bridges and overhangs" +msgstr "Zachovat mosty a převisy" + msgid "Keep fan always on" msgstr "Ventilátor vždy zapnutý" @@ -4124,6 +5927,9 @@ msgstr "Zachovat spodní část" msgid "Keep min" msgstr "Zachovat minima" +msgid "Keep only bridges" +msgstr "Nechte si jen mosty" + msgid "Keep the selected settings." msgstr "Zachovejte vybraná nastavení." @@ -4139,6 +5945,9 @@ msgstr "Klávesové zkratky" msgid "kg" msgstr "kg" +msgid "Kickstart duration" +msgstr "Trvání počátečního startu" + msgid "Label objects" msgstr "Označování objektů" @@ -4160,6 +5969,9 @@ msgstr "Vrstva" msgid "Layer height" msgstr "Výška vrstvy" +msgid "Layer height can't be greater than %s" +msgstr "Výška vrstvy nemůže být větší než %s" + msgid "" "Layer height is not valid.\n" "\n" @@ -4172,9 +5984,27 @@ msgstr "" msgid "Layer height limits" msgstr "Výškové limity vrstvy" +msgid "Layer previe&w Tab" +msgstr "Karta Náhled na Slicování" + msgid "Layer range Settings to modify" msgstr "Nastavení pro vrstvy v rozsahu" +msgid "Layer Time" +msgstr "Čas vrstvy" + +msgid "Layer time" +msgstr "Čas vrstvy" + +msgid "Layer Time (log)" +msgstr "Čas vrstvy (protokol)" + +msgid "Layer time (log)" +msgstr "Čas vrstvy (protokol)" + +msgid "Layer time goal" +msgstr "Čas vrstvy" + msgid "layers" msgstr "vrstva(y)" @@ -4184,6 +6014,9 @@ msgstr "Vrstvy" msgid "Layers and perimeters" msgstr "Vrstvy a perimetry" +msgid "Layout with the tab bar" +msgstr "Rozvržení s lištou karet" + msgid "Leave \"%1%\" enabled" msgstr "Ponechat možnost \"%1%\" povolenou" @@ -4205,6 +6038,12 @@ msgstr "Hodnota levého přednastavení" msgid "Left View" msgstr "Pohled zleva" +msgid "Legacy layout" +msgstr "Starší rozvržení" + +msgid "Legend" +msgstr "Legenda" + msgid "Legend/Estimated printing time" msgstr "Legenda / Odhadovaný čas tisku" @@ -4213,8 +6052,8 @@ msgstr "Vzdálenost" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" -"Délka kovové trubičky určené pro ochlazení a zformování filamentu po " -"vytažení z extruderu." +"Délka kovové trubičky určené pro ochlazení a zformování filamentu po vytažení z " +"extruderu." msgid "Length of the infill anchor" msgstr "Délka výplňové kotvy" @@ -4223,8 +6062,11 @@ msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" -"Licenční ujednání všech následujících programů (knihoven) je součástí " -"licenční smlouvy" +"Licenční ujednání všech následujících programů (knihoven) je součástí licenční " +"smlouvy" + +msgid "Lift only on" +msgstr "Pouze zvedání" msgid "" "Lift the object above the bed when it is partially below. Enabled by " @@ -4236,15 +6078,92 @@ msgstr "" msgid "Lift Z" msgstr "Zvednout Z" +msgid "Lift z enforcement" +msgstr "Vynucení zvednutí Z" + msgid "Lightning" msgstr "Lightning" +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Jako šířka první vrstvy, ale mezera je vzdálenost mezi dvěma řádky (jako trochu se " +"překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Jako šířka první vrstvy, ale mezera je vzdálenost mezi dvěma řádky (jako trochu se " +"překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí procenta " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"Like Perimeter width but spacing is the distance between two perimeter lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Jako šířka perimetru, ale mezera je vzdálenost mezi dvěma obvodovými čarami(jak se " +"trochu překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí procenta " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"Like Solid infill width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Jako šířka výplně Solid, ale mezera je vzdálenost mezi dvěma řádky (jako trochu se " +"překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Like the External perimeters width, but this value is the distance between " +"the edge and the 'frontier' to the next perimeter.\n" +"Setting the spacing will deactivate the width setting, and vice versa.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Stejně jako šířka vnějšího perimetru, ale tato hodnota je vzdálenost mezi okraj a " +"'hranice' k dalšímu perimetru.\n" +"Nastavením mezery deaktivujete nastavení šířky a naopak.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí procenta " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"Like Top solid infill width but spacing is the distance between two lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Jako šířka horní plné výplně, ale mezera je vzdálenost mezi dvěma řádky(jak se " +"trochu překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí výchozí " +"výšky vrstvy." + msgid "Limited" msgstr "Omezené" msgid "Line" msgstr "Čára" +msgid "Linear" +msgstr "Čára" + +msgid "lines" +msgstr "čára" + msgid "Load" msgstr "Načíst" @@ -4262,14 +6181,17 @@ msgid "" "maintaining different profiles or including configurations from a network " "storage." msgstr "" -"Načtěte a uložte nastavení z/do daného adresáře. To je užitečné pro " -"udržování různých profilů nebo konfigurací ze síťového úložiště." +"Načtěte a uložte nastavení z/do daného adresáře. To je užitečné pro udržování " +"různých profilů nebo konfigurací ze síťového úložiště." msgid "Load config file" msgstr "Načíst konfigurační soubor" msgid "Load Config from ini/amf/3mf/gcode and merge" -msgstr "Načíst konfiguraci zesouboru ini/amf/3mf/gcode a sloučit" +msgstr "Načíst konfiguraci ze souboru ini/amf/3mf/gcode a sloučit" + +msgid "Load configuration file exported from PrusaSlicer" +msgstr "Načíst konfigurační soubor exportovaný z PrusaSlicer" msgid "Load configuration from project file" msgstr "Načíst konfiguraci z projektu" @@ -4278,8 +6200,8 @@ msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" -"Načíst konfiguraci ze zadaného souboru. Může být použito vícekrát než jednou " -"pro načtení z více souborů." +"Načíst konfiguraci ze zadaného souboru. Může být použito vícekrát než jednou pro " +"načtení z více souborů." msgid "Load exported configuration file" msgstr "Načíst exportovaný konfigurační soubor" @@ -4299,6 +6221,9 @@ msgstr "Přidání části" msgid "Load presets from a bundle" msgstr "Načíst přednastavení z balíku" +msgid "Load presets from a PrusaSlicer bundle" +msgstr "Načíst předvolby z balíčku PrusaSlicer" + msgid "Load Project" msgstr "Načíst Projekt" @@ -4360,15 +6285,18 @@ msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" -"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že nastavení jsou stejná jako systémové " -"(nebo výchozí) hodnoty pro aktuální skupinu nastavení" +"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že nastavení jsou stejná jako systémové (nebo " +"výchozí) hodnoty pro aktuální skupinu nastavení" msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" -"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že hodnota je shodná se systémovou " -"(výchozí) hodnotou." +"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že hodnota je shodná se systémovou (výchozí) " +"hodnotou." + +msgid "Log time" +msgstr "Čas přihlášení" msgid "Logging level" msgstr "Úroveň logování" @@ -4376,12 +6304,67 @@ msgstr "Úroveň logování" msgid "Loops (minimum)" msgstr "Smyček (minimálně)" +msgid "lowest Y" +msgstr "nejnižší Y" + +msgid "lowest Z" +msgstr "nejnižší Z" + msgid "Lowest Z height" msgstr "Nejnižší výška v ose Z" +msgid "M117" +msgstr "M117" + +msgid "M73" +msgstr "M73" + +msgid "" +"M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute " +"intervals into the G-code to let the firmware show accurate remaining time. " +"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " +"firmware supports M73 Qxx Sxx for the silent mode.\n" +"M117: Send a command to display a message to the printer, this is 'Time " +"Left .h..m..s'." +msgstr "" +"M73: Emit M73 P{procento vytištěno} R{zbývající čas v minutách} v 1 minutěintervaly " +"do G-kódu, aby firmware ukazoval přesný zbývající čas.V tuto chvíli pouze firmware " +"Prusa i3 MK3 rozpoznává M73. Také i3 MK3firmware podporuje M73 Qxx Sxx pro tichý " +"režim.\n" +"M117: Odešlete příkaz k zobrazení zprávy do tiskárny, toto je 'Čas Doleva .h..m..s'." + msgid "Machine limits" msgstr "Limity stroje" +msgid "Machine Limits" +msgstr "Limity stroje" + +msgid "Machine limits are disabled. They are not used for anything." +msgstr "Strojové limity jsou deaktivovány. K ničemu se nepoužívají." + +msgid "Machine limits are used as safegard when generating gcode" +msgstr "Limity stroje se používají jako ochrana při generování gcode" + +msgid "" +"Machine limits will be emitted to G-code and used to estimate print time. " +"They are also used as safegard when generating gcode" +msgstr "" +"Limity stroje budou vysílány do G-kódu a použity k odhadu doby tisku.Používají se " +"také jako ochrana při generování gcode" + +msgid "" +"Machine limits will NOT be emitted to G-code, however they will be used to " +"estimate print time, which may therefore not be accurate as the printer may " +"apply a different set of machine limits. They are also used as safegard when " +"generating gcode" +msgstr "" +"Limity strojů NEBUDOU vysílány do G-kódu, ale budou použity k odhadněte dobu tisku, " +"která proto nemusí být přesná, protože tiskárna můžepoužijte jinou sadu limitů " +"stroje. Používají se také jako ochrana, když generování gcode" + +msgid "Main GUI always in expert mode" +msgstr "Hlavní GUI vždy v expertním režimu" + msgid "" "Make sure the object is printable. This is usually caused by negligibly " "small extrusions or by a faulty model. Try to repair the model or change its " @@ -4391,9 +6374,18 @@ msgstr "" "extruzemi nebo vadným modelem. Zkuste model opravit nebo změnit jeho " "orientaci na podložce." +msgid "Manual by Gary Hodgson. Inspired by the RepRap community." +msgstr "Manuál od Garyho Hodgsona. Inspirováno komunitou RepRap." + msgid "Manual editing" msgstr "Manuální úprava" +msgid "Marker" +msgstr "Popisovač" + +msgid "Masked CWS" +msgstr "Maskovaný CWS" + msgid "Masked SLA file exported to %1%" msgstr "Soubor pro SLA byl exportován do %1%" @@ -4401,7 +6393,7 @@ msgid "Match single line" msgstr "Shoda na jednom řádku" msgid "Mate&rial Settings Tab" -msgstr "Panel Nastavení mate&riálu" +msgstr "Panel Nastavení Mate&riálu" msgid "Material" msgstr "Materiál" @@ -4413,37 +6405,79 @@ msgid "Material Settings" msgstr "Nastavení materiálu" msgid "Material Settings Tab" -msgstr "Panel Nastavení materiálu" +msgstr "Panel Nastavení Materiálu" + +msgid "material_correction" +msgstr "materiál_korekce" msgid "Max" -msgstr "Maximum" +msgstr "Max" + +msgid "max %s version" +msgstr "max %s verze" + +msgid "Max angle" +msgstr "Max úhel" + +msgid "Max bridge density" +msgstr "Max hustota mostu" msgid "Max bridge length" -msgstr "Maximální délka mostu" +msgstr "Max délka mostu" msgid "Max bridges on a pillar" msgstr "Max počet mostů na sloupu" +msgid "Max fan speed" +msgstr "Max rychlost ventilátoru" + +msgid "Max infill" +msgstr "Max výplň" + +msgid "Max layer height" +msgstr "Max výška tisku" + +msgid "Max layer height can't be greater than nozzle diameter" +msgstr "Max výška vrstvy nemůže být větší než průměr trysky" + +msgid "Max length" +msgstr "Max délka" + +msgid "Max line overlap" +msgstr "Max překrytí čar" + msgid "Max merge distance" -msgstr "Maximální vzdálenost pro sloučení" +msgstr "Max vzdálenost pro sloučení" msgid "Max pillar linking distance" -msgstr "Max. vzdálenost propojení podpěr" +msgstr "Max vzdálenost propojení podpěr" msgid "Max print height" -msgstr "Maximální výška tisku" +msgstr "Max výška tisku" msgid "Max print speed" -msgstr "Maximální rychlost tisku" +msgstr "Max rychlost tisku" + +msgid "Max small perimeters length" +msgstr "Max délka malého perimetru" + +msgid "Max speed" +msgstr "Max rychlost" + +msgid "Max speed on the wipe tower" +msgstr "Max rychlost na čistící věži" + +msgid "Max speed reduction" +msgstr "Snížení rychlosti Max" msgid "Max volumetric slope negative" -msgstr "Maximální negativní objemový sklon" +msgstr "Max negativní objemový sklon" msgid "Max volumetric slope positive" -msgstr "Maximální pozitivní objemový sklon" +msgstr "Max pozitivní objemový sklon" msgid "Max volumetric speed" -msgstr "Maximální objemová rychlost" +msgstr "Max objemová rychlost" msgid "Maximal bridging distance" msgstr "Maximální vzdálenost přemostění" @@ -4489,6 +6523,9 @@ msgstr "Maximální zrychlení při retrakci" msgid "Maximum acceleration when retracting (M204 R)" msgstr "Maximální zrychlení při retrakci (M204 R)" +msgid "Maximum acceleration when travelling (M204 T)" +msgstr "Maximální zrychlení při cestování (M204 T)" + msgid "Maximum acceleration X" msgstr "Maximální zrychlení X" @@ -4501,6 +6538,46 @@ msgstr "Maximální zrychlení Z" msgid "Maximum accelerations" msgstr "Maximální zrychlení" +msgid "" +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~178, brim will be created on everything but straight sections." +msgstr "" +"Maximální úhel, aby se objevilo oko s okrajem. \n" +"Pokud je nastaveno na 0, nebude vytvořen žádný okraj. \n" +"Pokud je nastaveno na ~178, okraj se vytvoří na všem kromě úseků průlivu." + +msgid "" +"Maximum area for the hole where the hole_size_compensation will apply fully. " +"After that, it will decrease down to 0 for four times this area. Set to 0 to " +"let the hole_size_compensation apply fully for all detected holes" +msgstr "" +"Maximální plocha pro díru, kde se plně uplatní kompenzace velikosti hole.Poté se " +"sníží na 0 na čtyřnásobek této oblasti. Nastavte na 0 na nechte hodnotu " +"hole_size_compensation plně aplikovat na všechny zjištěné díry" + +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" +"Maximální odchylka bodu od odhadovaného poloměru kruhu.\n" +"Vzhledem k tomu, že válce jsou často exportovány jako trojúhelníky různé velikosti, " +"body nemusí být na perimetru kruhu. Toto nastavení vám umožňuje určitou volnost " +"rozšířit detekci.\n" +"V mm nebo v % poloměru." + +msgid "" +"Maximum density for bridge lines. If you want more space between line (or " +"less), you can modify it. A value of 50% will create two times less lines, " +"and a value of 200% will create two time more lines that overlap each other." +msgstr "" +"Maximální hustota pro můstkové linky. Pokud chcete více prostoru mezi linkami (nebo " +"méně), můžete jej upravit. Hodnota 50 % vytvoří dvakrát méně řádků, a hodnota 200 % " +"vytvoří dvakrát více čar, které se navzájem překrývají." + msgid "" "Maximum deviation of exported G-code paths from their full resolution " "counterparts. Very high resolution G-code requires huge amount of RAM to " @@ -4517,6 +6594,15 @@ msgstr "" "vytvoří low poly efekt a protože redukce G-codu se provádí v každé vrstvě " "nezávisle, mohou vznikat viditelné artefakty." +msgid "" +"Maximum distance between two points to allow adding new ones. Allow to avoid " +"distorting long strait areas.\n" +"Set zero to disable." +msgstr "" +"Maximální vzdálenost mezi dvěma body, aby bylo možné přidat nové. Povolit vyhnout " +"senarušuje dlouhé oblasti průlivu.\n" +"Nastavit nulu pro zakázání." + msgid "Maximum exposure time" msgstr "Maximální doba osvitu" @@ -4547,32 +6633,35 @@ msgstr "Maximální rychlost posuvu Z" msgid "Maximum feedrates" msgstr "Maximální rychlosti posuvu" +msgid "Maximum G1 per second" +msgstr "Maximální G1 za sekundu" + msgid "Maximum initial exposure time" msgstr "Maximální doba počátečního osvitu" msgid "Maximum jerk E" -msgstr "Maximální ryv E" +msgstr "Max Jerk (Ryv) E" msgid "Maximum jerk of the E axis" -msgstr "Maximální ryv (jerk) osy E" +msgstr "Max Jerk (Ryv) osy E" msgid "Maximum jerk of the X axis" -msgstr "Maximální ryv (jerk) osy X" +msgstr "Max Jerk (Ryv) osy X" msgid "Maximum jerk of the Y axis" -msgstr "Maximální ryv (jerk) osy Y" +msgstr "Max Jerk (Ryv) osy Y" msgid "Maximum jerk of the Z axis" -msgstr "Maximální ryv (jerk) osy Z" +msgstr "Max Jerk (Ryv) osy Z" msgid "Maximum jerk X" -msgstr "Maximální ryv X" +msgstr "Max Jerk (Ryv) X" msgid "Maximum jerk Y" -msgstr "Maximální ryv Y" +msgstr "Max Jerk (Ryv) Y" msgid "Maximum jerk Z" -msgstr "Maximální ryv Z" +msgstr "Max Jerk (Ryv) Z" msgid "Maximum length of the infill anchor" msgstr "Maximální délka výplňové kotvy" @@ -4581,8 +6670,25 @@ msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" -"Maximální počet mostů, které mohou být umístěny na podpěrný sloup. Mosty " -"drží hroty podpěr a připojují se ke sloupům jako malé větve." +"Maximální počet mostů, které mohou být umístěny na podpěrný sloup. Mosty drží hroty " +"podpěr a připojují se ke sloupům jako malé větve." + +msgid "" +"Maximum speed allowed for this filament. Limits the maximum speed of a print " +"to the minimum of the print speed and the filament speed. Set zero for no " +"limit." +msgstr "" +"Maximální povolená rychlost pro toto vlákno. Omezuje maximální rychlost tiskuna " +"minimum rychlosti tisku a rychlosti vlákna. Nastavte nulu pro ne omezit." + +msgid "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set zero for no limit." +msgstr "" +"Maximální objemová rychlost povolená pro toto vlákno. Omezuje maximální objemová " +"rychlost tisku na minimum tisku a objemová vlákna Rychlost. Nastavte nulu pro žádný " +"limit." msgid "Maximum width of a segmented region" msgstr "Maximální šířka segmentované oblasti" @@ -4599,9 +6705,19 @@ msgstr "Sloučit všechny části do jednoho jediného objektu" msgid "Merged" msgstr "Sloučení" +msgid "" +"Merging bridges or pillars into other pillars can increase the radius. Zero " +"means no increase, one means full increase." +msgstr "" +"Sloučení mostů nebo pilířů do jiných pilířů může zvýšit poloměr. Nulaznamená žádný " +"nárůst, jeden znamená plný nárůst." + msgid "Merging slices and calculating statistics" msgstr "Slučování tiskových vrstev a výpočet statistik" +msgid "Merging with perimeters" +msgstr "Sloučení s perimetry" + msgid "Mesh repair failed." msgstr "Oprava meshe selhala." @@ -4613,11 +6729,74 @@ msgstr "" msgid "Message for pause print on current layer (%1% mm)." msgstr "Zpráva při pozastavení tisku na aktuální vrstvě ve výšce (%1% mm)." +msgid "Method" +msgstr "Metoda" + +msgid "Mill" +msgstr "Mlýn" + +msgid "Milling cutter" +msgstr "Fréza" + +msgid "Milling cutters" +msgstr "Frézy" + +msgid "Milling diameter" +msgstr "Průměr frézování" + +msgid "Milling extra XY size" +msgstr "Frézování extra velikosti XY" + +msgid "Milling only after" +msgstr "Frézování až po" + +msgid "Milling post-processing" +msgstr "Následné zpracování frézováním" + +msgid "Milling Speed" +msgstr "Rychlost frézování" + +msgid "milliseconds" +msgstr "milisekundy" + msgid "Min" -msgstr "Minimum" +msgstr "Min" + +msgid "min %s version" +msgstr "min %s verze" + +msgid "Min bridge density" +msgstr "Min hustota mostu" + +msgid "Min concave angle" +msgstr "Min úhel vyhlazování křivky (konkávní)" + +msgid "Min convex angle" +msgstr "Min konvexní úhel" + +msgid "Min first layer speed" +msgstr "Min rychlost první vrstvy" + +msgid "Min height for travel" +msgstr "Min výška pro cestování" + +msgid "Min layer height" +msgstr "Min výška vrstvy" + +msgid "Min layer height can't be greater than Max layer height" +msgstr "Min výška vrstvy nemůže být větší než Max výška vrstvy" + +msgid "Min length" +msgstr "Min délka" msgid "Min print speed" -msgstr "Minimální rychlost tisku" +msgstr "Rychlost tisku Min " + +msgid "Min small perimeters length" +msgstr "Min délka malých perimetrů" + +msgid "Min surface" +msgstr "Min povrch" msgid "Min width" msgstr "Min šířka" @@ -4637,15 +6816,73 @@ msgstr "Minimální vytlačený objem na čistící věži" msgid "Minimize application" msgstr "Minimalizace aplikace" +msgid "" +"Minimum (concave) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimální (konkávní) úhel ve vrcholu umožňující vyhlazení (pokus o vytvoření křivka " +"kolem vrcholu). 180 : nic nebude hladké, 0 : všechny úhly budou být vyhlazený." + +msgid "" +"Minimum (convex) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimální (konvexní) úhel ve vrcholu umožňující vyhlazení (pokus o vytvoření křivka " +"kolem vrcholu). 180 : nic nebude hladké, 0 : všechny úhly budou být vyhlazený." + msgid "Minimum bottom shell thickness" msgstr "Minimální tloušťka spodní skořepiny" msgid "Minimum bottom shell thickness is %1% mm." msgstr "Minimální tloušťka spodní skořepiny je %1% mm." +msgid "" +"Minimum density for bridge lines. If Lower than bridge_overlap, then the " +"overlap value can be lowered automatically down to this value. If the value " +"is higher, this parameter has no effect.\n" +"Default to 87.5% to allow a little void between the lines." +msgstr "" +"Minimální hustota pro mostní vedení. Pokud je nižší než bridge_overlap, pak hodnotu " +"překrytí lze automaticky snížit až na tuto hodnotu. Pokud je hodnota je vyšší, " +"tento parametr nemá žádný vliv.\n" +"Výchozí hodnota je 87,5% aby mezi řádky byla malá mezera." + +msgid "" +"Minimum detail resolution, used for internal structures (gapfill and some " +"infill patterns).\n" +"Don't put a too-small value (0.05mm is way too low for many printers), as it " +"may create too many very small segments that may be difficult to display and " +"print." +msgstr "" +"Minimální rozlišení detailů, používané pro vnitřní struktury (gapfill a některé " +"vzory výplně).\n" +"Neuvádějte příliš malou hodnotu (0,05 mm je pro mnoho tiskáren příliš málo), " +"protože může vytvořit příliš mnoho velmi malých segmentů, které může být obtížné " +"zobrazit a tisk." + +msgid "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more details than printers can render. Set zero to disable any " +"simplification and use full resolution from input. \n" +"Note: Slic3r has an internal working resolution of 0.0001mm.\n" +"Infill & Thin areas are simplified up to 0.0125mm." +msgstr "" +"Minimální rozlišení detailů, používané ke zjednodušení vstupního souboru pro " +"urychlení úloha slicování a snižování využití paměti. Modely s vysokým rozlišením " +"často nesou více detailů, než mohou tiskárny vykreslit. Nastavením nuly zakážete " +"jakékoli zjednodušení a využití plného rozlišení ze vstupu. \n" +"Poznámka: Slic3r má vnitřní pracovní rozlišení 0,0001 mm.\n" +"Výplňové a tenké oblasti jsou zjednodušeny až na 0,0125 mm." + msgid "Minimum exposure time" msgstr "Minimální doba osvitu" +msgid "Minimum extrusion length" +msgstr "Minimální délka extruze" + msgid "Minimum feedrate when extruding" msgstr "Minimální rychlosti posuvu během extruze" @@ -4658,9 +6895,19 @@ msgstr "Minimální rychlosti posuvu" msgid "Minimum initial exposure time" msgstr "Minimální doba počátečního osvitu" +msgid "Minimum retraction" +msgstr "Minimální retrakce" + msgid "Minimum shell thickness" msgstr "Minimální tloušťka skořepiny" +msgid "" +"Minimum speed when printing the first layer.\n" +"Set zero to disable." +msgstr "" +"Minimální rychlost při tisku první vrstvy.\"\n" +"Nastavit nulu pro zakázání." + msgid "Minimum thickness of a top / bottom shell" msgstr "Minimální tloušťka vrchní / spodní skořepiny" @@ -4670,6 +6917,9 @@ msgstr "Minimální tloušťka vrchní skořepiny" msgid "Minimum top shell thickness is %1% mm." msgstr "Minimální tloušťka vrchní skořepiny je %1% mm." +msgid "Minimum top width for infill" +msgstr "Minimální horní šířka pro výplň" + msgid "Minimum travel after retraction" msgstr "Minimální dráha extruderu po retrakci" @@ -4682,6 +6932,31 @@ msgstr "Minimální rychlost při přesunu (M205 T)" msgid "Minimum wall thickness of a hollowed model." msgstr "Minimální tloušťka stěny dutého modelu." +msgid "minimum width" +msgstr "minimální šířka" + +msgid "Minimum width" +msgstr "Minimální šířka" + +msgid "" +"Minimum width for the extrusion to be extruded (widths lower than the nozzle " +"diameter will be over-extruded at the nozzle diameter). If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter. The " +"default behavior of PrusaSlicer is with a 33% value. Put 100% to avoid any " +"sort of over-extrusion." +msgstr "" +"Minimální šířka pro vytlačování, které má být vytlačeno (šířky menší než tryska " +"průměr bude nadprůměrně vytlačen na průměru trysky). Pokud je vyjádřen jako " +"procento (například 110%) bude vypočítáno z průměru trysky.Výchozí chování " +"PrusaSlicer je s 33% hodnotou. Dejte 100%, abyste se vyhnuli nějaké nadměrné " +"vytlačování." + +msgid "" +"Minimum width of features to maintain when doing the first layer " +"compensation." +msgstr "" +"Minimální šířka prvků, které je třeba zachovat při vytváření první vrstvykompenzace." + msgid "Mirror horizontally" msgstr "Zrcadlit horizontálně" @@ -4712,15 +6987,27 @@ msgstr "mm nebo %" msgid "mm or % (zero to disable)" msgstr "mm nebo % (nula pro deaktivaci)" +msgid "mm/%" +msgstr "mm/%" + msgid "mm/s" msgstr "mm/s" msgid "mm/s or %" msgstr "mm/s nebo %" +msgid "mm/sec" +msgstr "mm/sec" + msgid "mm/s²" msgstr "mm/s²" +msgid "mm/s² or %" +msgstr "mm/s² nebo %" + +msgid "mm3" +msgstr "mm3" + msgid "mm²" msgstr "mm²" @@ -4748,6 +7035,9 @@ msgstr "Oprava modelu byla zrušena" msgid "Model repair finished" msgstr "Oprava modelu byla dokončena" +msgid "Model rounding precision" +msgstr "Přesnost zaokrouhlování modelu" + msgid "Modifications to the current profile will be saved." msgstr "Úpravy aktuálního profilu budou uloženy." @@ -4760,6 +7050,9 @@ msgstr "Modifikátor" msgid "Modifiers" msgstr "Modifikátory" +msgid "Modifying slices" +msgstr "Úprava Slicování" + msgid "money/bottle" msgstr "cena/láhev" @@ -4769,6 +7062,9 @@ msgstr "cena/kg" msgid "Monotonic" msgstr "Monotónní" +msgid "Monotonic (filled)" +msgstr "Monotónní (plněné)" + msgid "More" msgstr "Více" @@ -4820,6 +7116,25 @@ msgstr "Posun výběru o 10 mm v kladném směru osy Y" msgid "Move support point" msgstr "Posun podpěrného bodu" +msgid "" +"Move the fan start in the past by at least this delay (in seconds, you can " +"use decimals). It assumes infinite acceleration for this time estimation, " +"and will only take into account G1 and G0 moves.\n" +"It won't move fan comands from custom gcodes (they act as a sort of " +"'barrier').\n" +"It won't move fan comands into the start gcode if the 'only custom start " +"gcode' is activated.\n" +"Use 0 to deactivate." +msgstr "" +"Posuňte start ventilátoru v minulosti alespoň o toto zpoždění (v sekundách, můžete " +"použijte desetinná místa). Předpokládá nekonečné zrychlení pro tento časový odhad,a " +"bude brát v úvahu pouze pohyby G1 a G0.\n" +"Nepřesune příkazy pro fanoušky z vlastních kódů gcode (fungují jako jakési " +"'bariéra').\n" +"Nepřesune příkazy ventilátoru do startovacího gcode, pokud je jediný vlastní " +"startgcode je aktivován.\n" +"Pro deaktivaci použijte 0." + msgid "Movement" msgstr "Přejezd" @@ -4833,20 +7148,31 @@ msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" -"Multimateriálové tiskárny mohou potřebovat, aby při výměně nástrojů " -"vyčistili extrudery. Vytlačí přebytečný materiál do čistící věže." +"Multimateriálové tiskárny mohou potřebovat, aby při výměně nástrojů vyčistili " +"extrudery. Vytlačí přebytečný materiál do čistící věže." msgid "Multi-part object detected" msgstr "Detekován objekt obsahující více částí" +msgid "Multimaterial" +msgstr "Multimateriál" + msgid "Multimaterial painting" msgstr "Multimateriálové malování" +msgid "Multimaterial toolchange string reduction" +msgstr "Multimateriálová redukce struny pro výměnu nástrojů" + +msgid "Multimaterial toolchange temperature" +msgstr "Multimateriálová teplota výměny nástrojů" + msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" -"Bylo nalezeno více zařízení %s . Během flashování mějte připojené pouze " -"jedno." +"Bylo nalezeno více zařízení %s . Během flashování mějte připojené pouze jedno." + +msgid "Multiple extruders" +msgstr "Více extruderů" msgid "" "Multiple objects were loaded for a multi-material printer.\n" @@ -4857,6 +7183,9 @@ msgstr "" "Mají být vloženy jako jeden objekt obsahující více částí, \n" "namísto vložení několika objektů?" +msgid "Multiplier" +msgstr "Násobitel" + msgid "Multiply copies by creating a grid." msgstr "Vynásobí kopie vytvořením mřížky." @@ -4869,6 +7198,9 @@ msgstr "N/A" msgid "Name" msgstr "Název" +msgid "Name and Size" +msgstr "Jméno a velikost" + msgid "Name of the printer" msgstr "Název tiskárny" @@ -4876,8 +7208,8 @@ msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" -"Název varianty tiskárny. Varianty tiskárny mohou být například rozlišeny " -"podle průměru trysky." +"Název varianty tiskárny. Varianty tiskárny mohou být například rozlišeny podle " +"průměru trysky." msgid "Name of the printer vendor." msgstr "Název výrobce tiskárny." @@ -4888,6 +7220,15 @@ msgstr "Název profilu, ze kterého tento profil zdědí." msgid "Names of presets related to the physical printer" msgstr "Názvy přednastavení souvisejících s fyzickou tiskárnou" +msgid "Nb down:" +msgstr "Nb dolů:" + +msgid "Nb tests:" +msgstr "Nb testy:" + +msgid "Nb up:" +msgstr "Nb nahoru:" + msgid "Nearest" msgstr "Nejbližší" @@ -4909,6 +7250,9 @@ msgstr "Zvoleno nové přednastavení tiskárny" msgid "New Project" msgstr "Nový Projekt" +msgid "New project, clear platter" +msgstr "Nový projekt, čistý stůl" + msgid "New release version %1% is available." msgstr "K dispozici je nová verze %1%." @@ -4942,18 +7286,26 @@ msgid "No extrusion" msgstr "Žádná extruze" msgid "No extrusions were generated for objects." -msgstr "" -"Při tisku objektů nebyly vygenerovány žádné extruze tiskového materiálu." +msgstr "Při tisku objektů nebyly vygenerovány žádné extruze tiskového materiálu." msgid "No pad can be generated for this model with the current configuration" msgstr "Pro aktuální model nelze vygenerovat žádnou podložku" +msgid "No perimeters on bridge areas" +msgstr "Žádné perimetry v oblastech mostu" + msgid "No previously sliced file." msgstr "Žádné dříve slicované soubory." msgid "NO RAMMING AT ALL" msgstr "ŽÁDNÁ RAPIDNÍ EXTRUZE" +msgid "No solid infill over" +msgstr "Žádná plná výplň" + +msgid "No solid infill over perimeters" +msgstr "Žádná plná výplň po perimetru" + msgid "No sparse layers (EXPERIMENTAL)" msgstr "Bez řídkých vrstev (EXPERIMENTÁLNÍ)" @@ -4966,6 +7318,9 @@ msgstr "Žádné aktualizace nejsou dostupné" msgid "None" msgstr "Žádné" +msgid "None (soluble)" +msgstr "Žádný (rozpustný)" + msgid "Normal" msgstr "Normální" @@ -4978,12 +7333,21 @@ msgstr "normální režim" msgid "not a ZIP archive" msgstr "není ZIP archiv" +msgid "Not connected" +msgstr "Nepřipojený" + msgid "Not found:" msgstr "Nenalezeno:" +msgid "Not on first layer" +msgstr "Ne v první vrstvě" + msgid "Note" msgstr "Poznámka" +msgid "Note that only Multiple of 5 can be engraved in the part" +msgstr "Všimněte si, že do dílu lze vyrýt pouze násobek 5" + msgid "Note, that the selected preset will be deleted from this printer too." msgid_plural "" "Note, that the selected preset will be deleted from these printers too." @@ -5012,6 +7376,26 @@ msgstr[3] "" msgid "NOTE:" msgstr "POZNÁMKA:" +msgid "" +"Note: All parameters from this group are moved to the Physical Printer " +"settings (see changelog).\n" +"\n" +"A new Physical Printer profile is created by clicking on the \"cog\" icon " +"right of the Printer profiles combo box, by selecting the \"Add physical " +"printer\" item in the Printer combo box. The Physical Printer profile editor " +"opens also when clicking on the \"cog\" icon in the Printer settings tab. " +"The Physical Printer profiles are being stored into %s/physical_printer " +"directory." +msgstr "" +"Poznámka: Všechny parametry z této skupiny jsou přesunuty do fyzické " +"tiskárnynastavení (viz changelog).\n" +"\n" +"Nový profil fyzické tiskárny se vytvoří kliknutím na ikonu \"ozubená\" vpravo od " +"rozbalovacího pole Profily tiskáren, výběrem možnosti \"Přidat fyzickoutiskárna\" v " +"rozbalovacím seznamu Tiskárna. Editor profilu fyzické tiskárny otevře se také po " +"kliknutí na ikonu \"ozubené kolečko\" na kartě Nastavení tiskárny.Profily fyzické " +"tiskárny se ukládají do %s/physical_printeradresář." + msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "Poznámka: Je vyžadována verze AstroBoxu nejméně 1.1.0." @@ -5019,8 +7403,8 @@ msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" -"Poznámka: Vyžaduje se FlashAir s firmwarem 2.00.02 nebo novějším a " -"aktivovanou funkcí nahrávání." +"Poznámka: Vyžaduje se FlashAir s firmwarem 2.00.02 nebo novějším a aktivovanou " +"funkcí nahrávání." msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "Poznámka: Je vyžadován OctoPrint ve verzi alespoň 1.1.0." @@ -5032,7 +7416,7 @@ msgid "Note: some shortcuts work in (non)editing mode only." msgstr "Poznámka: některé zkratky nefungují v režimu editace." msgid "Note: This preset will be replaced after saving" -msgstr "Upozornění: Taoto přednastavení bude po uložení nahrazeno" +msgstr "Upozornění: Toto přednastavení bude po uložení nahrazeno" msgid "Notes" msgstr "Poznámky" @@ -5058,16 +7442,19 @@ msgstr "Průměr trysky:" msgid "Nozzle temperature" msgstr "Teplota trysky" +msgid "Nozzle volume" +msgstr "Objem trysky" + msgid "Number of cooling moves" msgstr "Počet chladících pohybů" msgid "Number of extruders of the printer." -msgstr "Počet extrudérů tiskárny." +msgstr "Počet extruderů tiskárny." msgid "" "Number of interface layers to insert between the object(s) and support " "material." -msgstr "Počet interface vrstev vložených mezi objekt (objekty) a podpěry." +msgstr "Počet kontaktních vrstev vložených mezi objekt (objekty) a podpěry." msgid "" "Number of interface layers to insert between the object(s) and support " @@ -5076,6 +7463,24 @@ msgstr "" "Počet kontaktních vrstev, které se vloží mezi objekt(y) a podpěry. Nastavte " "na -1, chcete-li použít support_material_interface_layers" +msgid "" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"zero to disable skirt completely." +msgstr "" +"Počet smyček pro sukni. Pokud je možnost Minimální délka vysunutí set, počet smyček " +"může být větší než ten nakonfigurovaný zde. Set nula pro úplné vypnutí sukně." + +msgid "Number of milling heads." +msgstr "Počet frézovacích hlav." + +msgid "" +"Number of mm the overhang need to be for the reversal to be considered " +"useful. Can be a % of the perimeter width." +msgstr "" +"Počet mm přesahu, který musí být, aby bylo možné zvážit obrácení užitečné. Může být " +"% z šířky perimetru." + msgid "Number of pixels in" msgstr "Počet pixelů v ose" @@ -5097,12 +7502,14 @@ msgstr "Počet vrchních generovaných plných vrstev." msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" -msgstr "" -"Počet vrstev potřebných pro přechod z počáteční doby osvitu na dobu osvitu" +msgstr "Počet vrstev potřebných pro přechod z počáteční doby osvitu na dobu osvitu" msgid "Number of tool changes" msgstr "Počet změn nástroje" +msgid "O&pen %s" +msgstr "O&otevřít %s" + msgid "Object elevation" msgstr "Nadzvednutí objektu" @@ -5119,7 +7526,7 @@ msgid "Object or Instance" msgstr "Objekt nebo Instanci" msgid "Object reordered" -msgstr "Zěna pořadí objektů" +msgstr "Změna pořadí objektů" msgid "Object Settings to modify" msgstr "Změna nastavení objektu" @@ -5143,6 +7550,9 @@ msgstr[3] "" "Velikost objektů ze souboru %s se zdá být nulová.\n" "Tento objekty byly z modelu odstraněny." +msgid "Object sort" +msgstr "Řazení objektů" + msgid "Object too large?" msgstr "Objekt moc velký?" @@ -5151,9 +7561,9 @@ msgid "" "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" -"Objekty budou použity k vyčištění barvy filamentu v trysce po změně " -"extruderu, aby se ušetřil materiál, který by jinak skončil v čistící věži. " -"Výsledkem budou objekty s náhodně mixovanými barvami." +"Objekty budou použity k vyčištění barvy filamentu v trysce po změně extruderu, aby " +"se ušetřil materiál, který by jinak skončil v čistící věži. Výsledkem budou objekty " +"s náhodně mixovanými barvami." msgid "object" msgid_plural "objects" @@ -5180,27 +7590,70 @@ msgstr "současného Objektu" msgid "Offset" msgstr "Odsazení" +msgid "Offsets (for multi-extruder printers)" +msgstr "Offsety (pro tiskárny s více Extrudery)" + +msgid "" +"Old layout: all windows are in the application, settings are on the top tab " +"bar and the platter choice in on the bottom of the platter view." +msgstr "" +"Staré rozvržení: všechna okna jsou v aplikaci, nastavení jsou na horní kartě bar a " +"výběr talíře ve spodní části zobrazení talíře." + msgid "Old Value" msgstr "Stará hodnota" +msgid "On" +msgstr "Na" + +msgid "On first layer" +msgstr "Na první vrstvě" + +msgid "On odd layers" +msgstr "Na lichých vrstvách" + msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"Na OSX je ve výchozím nastavení vždy spuštěna pouze jedna instance aplikace. " -"Je však povoleno spouštět více instancí stejné aplikace z příkazového řádku. " -"V takovém případě toto nastavení povolí pouze jednu instanci." +"Na OSX je ve výchozím nastavení vždy spuštěna pouze jedna instance aplikace. Je " +"však povoleno spouštět více instancí stejné aplikace z příkazového řádku. V takovém " +"případě toto nastavení povolí pouze jednu instanci." + +msgid "On overhangs" +msgstr "Na převisech" msgid "On overhangs only" msgstr "Pouze na převisech" +msgid "" +"On some OS like MacOS or some Linux, tooltips can't stay on for a long time. " +"This setting replaces native tooltips with custom dialogs to improve " +"readability (only for settings).\n" +"Note that for the number controls, you need to hover the arrows to get the " +"custom tooltip. Also, it keeps the focus but will give it back when it " +"closes. It won't show up if you are editing the field." +msgstr "" +"Na některých operačních systémech, jako je MacOS nebo Linux, nemohou popisky zůstat " +"zapnuté po dlouhou dobu.Toto nastavení nahrazuje nativní popisky vlastními dialogy " +"pro zlepšeníčitelnost (pouze pro nastavení).\n" +"Všimněte si, že pro ovládací prvky čísel musíte umístit kurzor na šipky, abyste " +"získali vlastní nápověda. Také zachová fokus, ale vrátí ho, když Zavírá se. " +"Nezobrazí se, pokud pole upravujete." + +msgid "On surfaces" +msgstr "Na površích" + msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"V tomto systému používá %s certifikáty HTTPS ze systému Certificate Store " -"nebo Keychain." +"V tomto systému používá %s certifikáty HTTPS ze systému Certificate Store nebo " +"Keychain." + +msgid "On top surfaces" +msgstr "Na horních plochách" msgid "On/Off one layer mode of the vertical slider" msgstr "Zapnou/vypnout režim jedné vrstvy vertikálního posuvníku" @@ -5215,6 +7668,12 @@ msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "Jeden nebo více objektů bylo přiřazeno extruderu, který tiskárna nemá." +msgid "one test" +msgstr "jeden test" + +msgid "One-loop perimeters" +msgstr "Perimetry s One-loop (RC)" + msgid "Ongoing uploads" msgstr "Probíhá nahrávání" @@ -5223,16 +7682,48 @@ msgid "" "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" -"V režimu spirálové vázy lze současně tisknout pouze jeden objekt. Buď " -"odeberte všechny objekty kromě posledního, nebo povolte sekvenční režim " -"pomocí \"complete_objects\"." +"V režimu spirálové vázy lze současně tisknout pouze jeden objekt. Buď odeberte " +"všechny objekty kromě posledního, nebo povolte sekvenční režim pomocí " +"\"complete_objects\"." msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" -"Podpěry vytvářet pouze v případě, že leží na tiskové podložce. Nevytváří " -"podpěry na výtisky." +"Podpěry vytvářet pouze v případě, že leží na tiskové podložce. Nevytváří podpěry na " +"výtisky." + +msgid "Only custom Start G-code" +msgstr "Pouze vlastní počáteční G-kód" + +msgid "" +"Only do the vase trick on the external side. Useful when the thickness is " +"too low." +msgstr "" +"Udělejte trik s vázou pouze na vnější straně. Užitečné, když je tloušťka příliš " +"nízká." + +msgid "" +"Only do the vase trick on the external side. Useful when you only want to " +"remove seam from screw hole." +msgstr "" +"Udělejte trik s vázou pouze na vnější straně. Užitečné, když chcete jen odstraňte " +"šev z otvoru pro šroub." + +msgid "Only draw brim over the sharp edges of the model." +msgstr "Nakreslete límec pouze přes ostré hrany modelu." + +msgid "Only for inner side" +msgstr "Pouze pro vnitřní stranu" + +msgid "Only for outer side" +msgstr "Pouze pro vnější stranu" + +msgid "Only for overhangs" +msgstr "Pouze pro převisy" + +msgid "Only if on platter" +msgstr "Jen pokud na podnose" msgid "Only infill where needed" msgstr "Výplň pouze kde je potřeba" @@ -5246,6 +7737,18 @@ msgstr "Zvednout Z pouze nad" msgid "Only lift Z below" msgstr "Zvednout Z pouze pod" +msgid "Only one peri - other algo" +msgstr "Pouze jedno peri - jiné algo" + +msgid "Only one perimeter" +msgstr "Pouze jeden perimeter" + +msgid "Only one perimeter on First layer" +msgstr "Pouze jeden perimeter na první vrstvě" + +msgid "Only one perimeter on Top surfaces" +msgstr "Pouze jeden perimeter na horních plochách" + msgid "Only retract when crossing perimeters" msgstr "Provést retrakci pouze při přejíždění perimetrů" @@ -5263,17 +7766,33 @@ msgstr "" "S vybranými SLA materiály jsou kompatibilní pouze následující nainstalované " "tiskárny" +msgid "" +"Only used for Klipper, where you can name the extruder. If not set, will be " +"'extruderX' with 'X' replaced by the extruder number." +msgstr "" +"Používá se pouze pro Klipper, kde můžete extruder pojmenovat. Pokud není nastaveno, " +"bude 'extruderX' s 'X' nahrazeným číslem extruderu." + +msgid "Only when GCode is ready" +msgstr "Pouze kdyz je G-Code pripraven" + msgid "Ooze prevention" msgstr "Prevence odkapávání" msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" -"V současné době není funkce \"Prevence odkapávání\" filamentu podporována " -"společně s povolenou čistící věží." +"V současné době není funkce \"Prevence odkapávání\" filamentu podporována společně " +"s povolenou čistící věží." + +msgid "Open %s" +msgstr "Otevřít %s" msgid "Open a G-code file" msgstr "Otevřít G-code" +msgid "Open a new %s instance" +msgstr "Otevřít novou instanci %s" + msgid "Open a project file" msgstr "Otevřít soubor s projektem" @@ -5310,9 +7829,24 @@ msgstr "Otevřít novou instanci" msgid "Open New Instance" msgstr "Otevřít Novou Instanci" +msgid "Open project STL/OBJ/AMF/3MF with config, clear platter" +msgstr "Otevřít projekt STL/OBJ/AMF/3MF s konfigurací, čistý talíř" + +msgid "Open the %s releases page in your browser" +msgstr "Otevřete ve svém prohlížeči stránku vydání %s" + +msgid "Open the %s wiki in your browser" +msgstr "Otevřete %s wiki ve svém prohlížeči" + msgid "Open the dialog to modify shape gallery" msgstr "Otevřete dialogové okno pro úpravu galerie tvarů" +msgid "Open the Slic3r Manual in your browser" +msgstr "Otevřete ve svém prohlížeči příručku Slic3r" + +msgid "Open the Slic3r website in your browser" +msgstr "Otevřete webovou stránku Slic3r ve svém prohlížeči" + msgid "Opening Configuration Wizard" msgstr "Otevírání průvodce nastavením" @@ -5353,9 +7887,9 @@ msgid "" "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" -"Optimalizovat rychloposuny do pořadí aby se minimalizovalo přejíždění " -"perimetrů. Nejvíce užitečné u Bowdenových extruderů které trpí na vytékání " -"filamentu. Toto nastavení zpomaluje tisk i generování G-code." +"Optimalizovat rychloposuny do pořadí aby se minimalizovalo přejíždění perimetrů. " +"Nejvíce užitečné u Bowdenových extruderů které trpí na vytékání filamentu. Toto " +"nastavení zpomaluje tisk i generování G-code." msgid "Options" msgstr "Volby" @@ -5363,6 +7897,9 @@ msgstr "Volby" msgid "Options for support material and raft" msgstr "Volby pro podpěry a raft" +msgid "Options for support material interface" +msgstr "Možnosti kontaktního podpůrného materiálu" + msgid "Options:" msgstr "Možnosti:" @@ -5390,12 +7927,18 @@ msgstr "Ostatní vrstvy" msgid "Other Vendors" msgstr "Ostatní výrobci" +msgid "Outer" +msgstr "Vnější" + msgid "Outer and inner brim" msgstr "Vnější a vnitřní límec" msgid "Outer brim only" msgstr "Pouze vnější okraj" +msgid "Outer XY size compensation" +msgstr "Vnější kompenzace velikosti XY" + msgid "Output File" msgstr "Výstupní soubor" @@ -5405,6 +7948,9 @@ msgstr "Výstupní soubor" msgid "Output filename format" msgstr "Formát názvu výstupního souboru" +msgid "Output Format" +msgstr "Výstupní formát" + msgid "Output Model Info" msgstr "Info o výstupním modelu" @@ -5414,20 +7960,72 @@ msgstr "Možnosti výstupu" msgid "Outside walls" msgstr "Vnější stěny" +msgid "Over-Bridge calibration" +msgstr "Kalibrace přemostění" + +msgid "Over-bridge calibration" +msgstr "Kalibrace přemostění" + msgid "Overflow" msgstr "Přetečení" +msgid "Overhang bridge flow threshold" +msgstr "Práh toku převislého mostu" + +msgid "Overhang bridge speed threshold" +msgstr "Práh rychlosti převislého mostu" + msgid "Overhang perimeter" msgstr "Perimetr převisu" +msgid "Overhang reversal" +msgstr "Zvrat převisu" + +msgid "Overhang reversal threshold" +msgstr "Práh obrácení převisu" + msgid "Overhang threshold" msgstr "Mezní úhel převisu" +msgid "Overhangs" +msgstr "Převisy" + +msgid "Overhangs speed" +msgstr "Rychlost Převisů" + msgid "Overlap" msgstr "Překrytí" +msgid "" +"Overlap between the thin wall and the perimeters. Can be a % of the external " +"perimeter width (default 50%)" +msgstr "" +"Přesah mezi tenkou stěnou a perimetery. Může být % vnějšího šířka perimeteru " +"(výchozí 50%)" + +msgid "Overlapping all perimeters" +msgstr "Překrývající se všechny perimetery" + +msgid "Overlapping external perimeter" +msgstr "Překrývající se vnější perimeter" + +msgid "" +"Override the retract_length setting from the printer config. Used for " +"calibration. Set negative to disable" +msgstr "" +"Přepsat nastavení retract_length z konfigurace tiskárny. Používá se pro " +"calibration. Set negative to disable" + +msgid "" +"Override the temperature of the extruder. Avoid making too many changes, it " +"won't stop for cooling/heating. 0 to disable. May only work on Height range " +"modifiers." +msgstr "" +"Přepište teplotu extrudéru. Neprovádějte příliš mnoho změn, to nezastaví se kvůli " +"chlazení/topení. 0 pro deaktivaci. Může fungovat pouze v rozsahu výškymodifikátory." + msgid "P&rint Settings Tab" -msgstr "Panel Nastavení &tisku" +msgstr "Panel Nastavení &Tisku" msgid "Pad" msgstr "Podložka" @@ -5531,12 +8129,23 @@ msgstr "Vložit ze schránky" msgid "Paste From Clipboard" msgstr "Vložení ze schránky" +msgid "Paths" +msgstr "Cesty" + msgid "Pattern" msgstr "Vzor" msgid "Pattern angle" msgstr "Úhel vzoru" +msgid "" +"Pattern for the ear. The concentric is the default one. The rectilinear has " +"a perimeter around it, you can try it if the concentric has too many " +"problems to stick to the build plate." +msgstr "" +"Vzor pro ucho. Soustředný je výchozí. Přímý má perimetr kolem něj, můžete to " +"zkusit, pokud má soustředný příliš mnohoproblémy s lepením na stavební desku." + msgid "Pattern spacing" msgstr "Rozteč podpěr" @@ -5546,11 +8155,24 @@ msgstr "Vzor použitý pro generování podpěr." msgid "Pause" msgstr "Pozastavení" +msgid "Pause before extraction " +msgstr "Pauza před extrakcí " + +msgid "Pause in melt zone" +msgstr "Pauza v zóně tání" + msgid "Pause print (\"%1%\")" msgstr "Pozastavení tisku (\"%1%\")" msgid "Pause Print G-code" -msgstr "G-code pro pozastavení tisku" +msgstr "G-Code pro pozastavení tisku" + +msgid "" +"Percent of a flow rate relative to object's normal layer height. It's the " +"percentage of the layer that will be over-extruded on top to do the ironing." +msgstr "" +"Procento průtoku vzhledem k normální výšce vrstvy objektu. Je to procento vrstvy, " +"která bude nadměrně vytlačena nahoře za účelem ironing." msgid "Percentage" msgstr "Procentuálně" @@ -5569,21 +8191,59 @@ msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" -"Rychlost vs. přesnost výpočtu. Nižší hodnoty mohou způsobit nežádoucí " -"artefakty." +"Rychlost vs. přesnost výpočtu. Nižší hodnoty mohou způsobit nežádoucí artefakty." msgid "Perimeter" msgstr "Perimetr" +msgid "perimeter" +msgstr "Perimetr" + +msgid "Perimeter acceleration" +msgstr "Zrychlení Perimetru" + +msgid "Perimeter anchor" +msgstr "Kotva perimetru" + +msgid "Perimeter bonding" +msgstr "Spojení perimetru" + msgid "Perimeter extruder" msgstr "Extruder pro perimetry" +msgid "Perimeter loop seam" +msgstr "Obvodový smyčkový šev" + +msgid "perimeter overlap" +msgstr "přesah perimetru" + +msgid "Perimeter overlap" +msgstr "Přesah perimetru" + +msgid "Perimeter spacing" +msgstr "Obvodová vzdálenost" + +msgid "Perimeter speed" +msgstr "Rychlost perimetru" + +msgid "Perimeter width" +msgstr "Šířka perimetru" + msgid "perimeters" msgstr "perimetry" msgid "Perimeters" msgstr "Perimetry" +msgid "Perimeters & Shell" +msgstr "Perimetry a skořepina" + +msgid "Perimeters count" +msgstr "Počet perimetrů" + +msgid "Perimeters loop" +msgstr "Perimetery s jednou smyčkou" + msgid "Physical Printer" msgstr "Fyzická tiskárna" @@ -5591,14 +8251,17 @@ msgid "Physical printers" msgstr "Fyzické tiskárny" msgid "Pick another vendor supported by %s" -msgstr "Vyberte si jiného výrobce, který je podporováný programem %s" +msgstr "Vyberte si jiného výrobce, který je podporovaný programem %s" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"Velikosti obrázků budou uloženy do souborů .gcode / .sl1 / .sl1s, v " -"následujícím formátu: \"XxY, XxY, ...\"" +"Velikosti obrázků budou uloženy do souborů .gcode / .sl1 / .sl1s, v následujícím " +"formátu: \"XxY, XxY, ...\"" + +msgid "Pigment percentage" +msgstr "Procento pigmentu" msgid "Pillar connection mode" msgstr "Způsob propojení podpěr" @@ -5627,6 +8290,9 @@ msgstr "Umístit plochou na podložku" msgid "Plater" msgstr "Podložka" +msgid "Platter" +msgstr "Jen pokud na podnose" + msgid "Please check your object list before preset changing." msgstr "Před změnou nastavení zkontrolujte prosím seznam objektů." @@ -5640,6 +8306,12 @@ msgstr "" msgid "Please select the file to reload" msgstr "Vyberte soubor, který chcete znovu načíst" +msgid "Polyhole detection margin" +msgstr "Detekovat okraj mnohonásobného otvoru" + +msgid "Polyhole twist" +msgstr "Kroucení mnohonásobného otvoru" + msgid "Portions copyright" msgstr "Autorská práva" @@ -5655,8 +8327,17 @@ msgstr "Pozice začátku perimetrů." msgid "Post processing scripts shall modify G-code file in place." msgstr "Post-processing skripty musí G-code upravit in place." +msgid "Post-processing milling" +msgstr "Následné-Zpracování frézováním" + +msgid "Post-processing script" +msgstr "Následné-Zpracování skript" + msgid "Post-processing scripts" -msgstr "Post-processing skripty" +msgstr "Následné-Zpracování skript" + +msgid "Precision" +msgstr "Přesnost" msgid "Preferences" msgstr "Nastavení" @@ -5694,8 +8375,8 @@ msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" -"Přednastavení \"%1%\" není kompatibilní s novým profilem tiskárny a má " -"následující neuložené změny:" +"Přednastavení \"%1%\" není kompatibilní s novým profilem tiskárny a má následující " +"neuložené změny:" msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " @@ -5707,6 +8388,9 @@ msgstr "" msgid "Preset with name \"%1%\" already exists." msgstr "Přednastavení s názvem \"%1%\" již existuje." +msgid "Presets and updates" +msgstr "Aktualizace" + msgid "" "Presets are different.\n" "Click this button to select the same preset for the right and left preset." @@ -5741,6 +8425,13 @@ msgstr "" "5× zrychlíte pohyb posuvníku pomocí\n" "šipek nebo kolečkem myši" +msgid "" +"Prevent the gcode builder from triggering an exception if a full layer is " +"empty, and allow the print to start from thin air afterward." +msgstr "" +"Zabránit staviteli gcode ve spuštění výjimky, pokud je plná vrstvavyprázdněte a " +"poté nechte tisk začít ze vzduchu." + msgid "Preview" msgstr "Náhled" @@ -5762,12 +8453,38 @@ msgstr "Tisk" msgid "Print &Host Upload Queue" msgstr "Fronta na&hrávání do tiskového serveru" +msgid "Print a calibration cube, for various calibration goals." +msgstr "Vytiskněte si kalibrační kostku pro různé kalibrační cíle." + +msgid "Print all brim at startup" +msgstr "Při spuštění vytiskněte všechny límce" + +msgid "Print at the end" +msgstr "Konec G-code" + msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" -"Tisk obrysových perimetrů od vnějších po vnitřní namísto opačného výchozího " -"pořadí." +"Tisk obrysových perimetrů od vnějších po vnitřní namísto opačného výchozího pořadí." + +msgid "" +"Print contour perimeters in two circles, in a continuous way, like for a " +"vase mode. It needs the external_perimeters_first parameter to work. \n" +"Doesn't work for the first layer, as it may damage the bed overwise. \n" +"Note that it will use min_layer_height from your hardware setting as the " +"base height (it doesn't start at 0), so be sure to put here the lowest value " +"your printer can handle. if it's not lower than two times the current layer " +"height, it falls back to the normal algorithm, as there is not enough room " +"to do two loops." +msgstr "" +"Tisk obrysových Perimeterů ve dvou kruzích souvisle, jako v režimu vázy. Ke své " +"činnosti potřebuje parametr external_perimeters_first. \n" +"Nefunguje pro první vrstvu, protože může poškodit postel. \n" +"Všimněte si, že jako základní výšku použije min_layer_height z vašeho hardwarového " +"nastavení (nezačíná na 0), takže nezapomeňte zadat nejnižší hodnotu, kterou vaše " +"tiskárna zvládne. pokud není nižší než dvojnásobek aktuální výšky vrstvy , vrátí se " +"zpět k normálnímu algoritmu, protože není dostatek místa pro provedení dvou smyček." msgid "Print Diameters" msgstr "Parametry extruderu" @@ -5784,14 +8501,17 @@ msgstr "Režim tisku" msgid "Print pauses" msgstr "Pauzy tisku" +msgid "Print remaining times" +msgstr "Podpora zbývajících tiskových časů" + msgid "Print settings" -msgstr "Nastavení tisku" +msgstr "Nastavení Tisku" msgid "Print Settings" -msgstr "Nastavení tisku" +msgstr "Nastavení Tisku" msgid "Print Settings Tab" -msgstr "Panel Nastavení tisku" +msgstr "Panel Nastavení Tisku" msgid "Print speed" msgstr "Rychlost tisku" @@ -5799,8 +8519,22 @@ msgstr "Rychlost tisku" msgid "Print speed override" msgstr "Přepsání rychlosti tisku" +msgid "" +"print speed will be reduced so that no less than %1%s are spent on that layer" +msgstr "" +"rychlost tisku bude snížena tak, aby na tuto vrstvu nebylo vynaloženo méně než %1%s" + +msgid "" +"Print the thumbnail code at the end of the gcode file instead of the front.\n" +"Be careful! Most firmwares expect it at the front, so be sure that your " +"firmware support it." +msgstr "" +"Vytiskněte kód miniatury na konec souboru gcode místo na přední stranu.\n" +"Buďte opatrní! Většina firmwarů to očekává na přední straně, takže se ujistěte, že " +"to váš firmware podporuje." + msgid "Print&er Settings Tab" -msgstr "Panel Nastav&ení tiskárny" +msgstr "Panel Nastav&ení Tiskárny" msgid "printer" msgstr "tiskárna" @@ -5845,10 +8579,10 @@ msgid "Printer scaling Z axis correction" msgstr "Korekce měřítka v ose Z" msgid "Printer Settings" -msgstr "Nastavení tiskárny" +msgstr "Nastavení Tiskárny" msgid "Printer Settings Tab" -msgstr "Panel Nastavení tiskárny" +msgstr "Panel Nastavení Tiskárny" msgid "Printer technology" msgstr "Technologie tisku" @@ -5874,14 +8608,16 @@ msgid "" "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" -"Tisk s více extrudery různých průměrů trysek. Má-li být podpěra tisknuta " -"aktuálním extruderem (support_material_extruder == 0 nebo " -"support_material_interface_extruder == 0), musí mít všechny trysky stejný " -"průměr." +"Tisk s více extrudery různých průměrů trysek. Má-li být podpěra tisknuta aktuálním " +"extruderem (support_material_extruder == 0 nebo support_material_interface_extruder " +"== 0), musí mít všechny trysky stejný průměr." msgid "Processing %s" msgstr "Zpracovávám %s" +msgid "Processing limit" +msgstr "Limit zpracování" + msgid "Profile dependencies" msgstr "Profilové závislosti" @@ -5897,6 +8633,9 @@ msgstr "Průběh:" msgid "Project is loading" msgstr "Projekt se načítá" +msgid "Prusa SL1" +msgstr "Importovat archiv SL1 / SL1S" + msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" msgstr "PrusaSlicer narazil na fatální chybu: \"%1%\"" @@ -5908,9 +8647,9 @@ msgid "" "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" -"Vyčištění trysky po změně extruderu se provede uvnitř výplní tohoto objektu. " -"Tím se sníží množství odpadu, ale může to mít za následek delší dobu tisku " -"kvůli dalším pohybům." +"Vyčištění trysky po změně extruderu se provede uvnitř výplní tohoto objektu. Tím se " +"sníží množství odpadu, ale může to mít za následek delší dobu tisku kvůli dalším " +"pohybům." msgid "Purging volumes" msgstr "Objemy čištění" @@ -5924,6 +8663,27 @@ msgstr "Objemy čištění - matice" msgid "Purpose of Machine Limits" msgstr "Účel limitů stroje" +msgid "" +"Put here the gcode to change the toolhead (called after the g-code T" +"{next_extruder}). You have access to {next_extruder} and " +"{previous_extruder}. next_extruder is the 'extruder number' of the new " +"milling tool, it's equal to the index (begining at 0) of the milling tool " +"plus the number of extruders. previous_extruder is the 'extruder number' of " +"the previous tool, it may be a normal extruder, if it's below the number of " +"extruders. The number of extruder is available at {extruder} and the number " +"of milling tool is available at {milling_cutter}." +msgstr "" +"Sem vložte gcode pro změnu hlavy nástroje (nazývá se po g-kódu T{next_extruder}). " +"Máte přístup k {next_extruder} a {previous_extruder}. next_extruder je ‚číslo " +"extrudéru‘ nového frézovacího nástroje, rovná se index (začínající na 0) " +"frézovacího nástroje plus počet extruderů. previous_extruder je „číslo extrudéru“ " +"předchozího nástroje, může to být běžný extrudér, pokud je nižší než počet " +"extruderů. Počet extruderů je k dispozici na {extruder} a počet frézovacích " +"nástrojů je k dispozici na {milling_cutter}." + +msgid "Quadratric" +msgstr "Kvadratický" + msgid "Quality" msgstr "Kvalita" @@ -5933,6 +8693,9 @@ msgstr "Kvalita / Rychlost" msgid "Quick" msgstr "Rychlé" +msgid "Quick Save" +msgstr "Rychlé Slicování a Uložit jako" + msgid "Quick Slice" msgstr "Rychlé Slicování" @@ -5974,13 +8737,12 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"Rapidní extruze označuje rychlé vytlačení filamentu těsně před jeho výměnou " -"za jiný v multi material tiskárně s jedním extruderem. Účelem je správně " -"vytvarovat konec vysouvaného filamentu tak, aby neblokoval zasunutí nového " -"filamentu a také mohl být sám později opětovně zasunut. Tento proces je " -"důležitý a rozdílné materiály mohou pro získání optimálního tvaru vyžadovat " -"různé rychlosti extruze. Z tohoto důvodu jsou objemové průtoky při rapidní " -"extruzi uživatelsky upravitelné.\n" +"Rapidní extruze označuje rychlé vytlačení filamentu těsně před jeho výměnou za jiný " +"v multi material tiskárně s jedním extruderem. Účelem je správně vytvarovat konec " +"vysouvaného filamentu tak, aby neblokoval zasunutí nového filamentu a také mohl být " +"sám později opětovně zasunut. Tento proces je důležitý a rozdílné materiály mohou " +"pro získání optimálního tvaru vyžadovat různé rychlosti extruze. Z tohoto důvodu " +"jsou objemové průtoky při rapidní extruzi uživatelsky upravitelné.\n" "\n" "Toto nastavení je určeno pro pokročilé uživatele, nesprávné nastavení velmi " "pravděpodobně povede k zaseknutí filamentu, vybroušení filamentu podávacím " @@ -6028,12 +8790,35 @@ msgstr "Pohled zezadu" msgid "Recent projects" msgstr "N&edávné projekty" +msgid "" +"Recommended min extrusion width for other layers (with a layer height of " +"%1%) is %2$.3f mm (or %3%%%).\n" +msgstr "" +"Doporučená min šířka vysunutí pro ostatní vrstvy (s výškou vrstvy %1%) je %2$.3f mm " +"(nebo %3%%%).\n" + +msgid "" +"Recommended min extrusion width for the first layer (with a first layer " +"height of %1%) is %2$.3f mm (or %3%%%)\n" +msgstr "" +"Doporučená min šířka vysunutí pro první vrstvu (s výškou první vrstvy %1%) je " +"%2$.3f mm (nebo %3%%%)\n" + +msgid "Recommended object min (thick) wall thickness for layer height %.2f and" +msgstr "Doporučená min tloušťka stěny objektu pro výšku vrstvy %.2f a" + +msgid "" +"Recommended object min thin wall thickness: Not available due to invalid " +"layer height." +msgstr "" +"Doporučený objekt min. tloušťka tenké stěny: Není k dispozici kvůli neplatné výšce " +"vrstvy." + msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" -"Doporučená tloušťka stěny objektu: Není k dispozici kvůli příliš malé šířce " -"extruze." +"Doporučená tloušťka stěny objektu: Není k dispozici kvůli příliš malé šířce extruze." msgid "Recreating" msgstr "Obnovení" @@ -6044,6 +8829,9 @@ msgstr "Obdélníkový" msgid "Rectilinear" msgstr "Přímočarý" +msgid "Rectilinear (filled)" +msgstr "Přímý (vyplněný)" + msgid "Rectilinear grid" msgstr "Přímočará mřížka" @@ -6052,10 +8840,10 @@ msgstr "Vpřed" msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" -msgstr[0] "%1$d Akce Vpřed" -msgstr[1] "%1$d Akce Vpřed" -msgstr[2] "%1$d Akcí Vpřed" -msgstr[3] "%1$d Akcí Vpřed" +msgstr[0] "Vpřed %1$d Akce" +msgstr[1] "Vpřed %1$d Akcí" +msgstr[2] "Vpřed %1$d Akci" +msgstr[3] "Vpřed %1$d Akci" msgid "Redo History" msgstr "Historie operací Vpřed" @@ -6087,9 +8875,15 @@ msgstr "Znovu načíst z disku" msgid "Reload from:" msgstr "Znovu načíst z:" +msgid "Reload platter from disk" +msgstr "Vše znovu načíst z disku" + msgid "Reload the plater from disk" msgstr "Znovu načíst podložku z disku" +msgid "Reload the platter from disk" +msgstr "Vše znovu načíst z disku" + msgid "Remaining errors" msgstr "Zbylé chyby" @@ -6123,6 +8917,9 @@ msgstr "Ubrat detail" msgid "Remove extruder from sequence" msgstr "Odebrat extruder ze seznamu" +msgid "Remove fil. slowdown" +msgstr "Odebrat" + msgid "Remove instance" msgstr "Odebrat instanci" @@ -6144,6 +8941,9 @@ msgstr "Odstranění malování podpěr" msgid "Remove parameter" msgstr "Odebrat parametr" +msgid "Remove perimeters" +msgstr "Odstraňte Perimetery" + msgid "Remove point" msgstr "Odebrat bod" @@ -6178,8 +8978,8 @@ msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" -"Přejmenování G-codu po zkopírování do vybrané cílové složky se nezdařilo. " -"Aktuální cesta je %1%.tmp. Zkuste to prosím znovu." +"Přejmenování G-codu po zkopírování do vybrané cílové složky se nezdařilo. Aktuální " +"cesta je %1%.tmp. Zkuste to prosím znovu." msgid "Render" msgstr "Render" @@ -6191,8 +8991,8 @@ msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" -"Vykreslení pomocí softwaru. Namísto výchozího ovladače OpenGL je načten " -"dodaný softwarový renderer MESA." +"Vykreslení pomocí softwaru. Namísto výchozího ovladače OpenGL je načten dodaný " +"softwarový renderer MESA." msgid "Repair" msgstr "Oprava" @@ -6290,6 +9090,9 @@ msgstr "Restart aplikace" msgid "Restore window position on start" msgstr "Obnovení polohy okna při spuštění" +msgid "Retr." +msgstr "Zezadu." + msgid "Retract amount before wipe" msgstr "Délka retrakce před očištěním" @@ -6299,15 +9102,19 @@ msgstr "Retrakce při změně vrstvy" msgid "Retraction" msgstr "Retrakce" +msgid "Retraction calibration" +msgstr "Kalibrace retrakce" + msgid "" "Retraction is not triggered when travel moves are shorter than this length." -msgstr "" -"Retrakce není spuštěna, pokud jsou rychloposuny pojezdu kratší než tato " -"délka." +msgstr "Retrakce není spuštěna, pokud jsou rychloposuny pojezdu kratší než tato délka." msgid "Retraction Length" msgstr "Vzdálenost retrakce" +msgid "Retraction length" +msgstr "Vzdálenost retrakce" + msgid "Retraction Length (Toolchange)" msgstr "Vzdálenost retrakce (při změně extruderu)" @@ -6315,16 +9122,24 @@ msgid "Retraction Speed" msgstr "Rychlost retrakce" msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)" -msgstr "" -"Retrakce pro neaktivní extruder (pokročilé nastavení pro tiskárny typu " +msgstr "Retrakce pro neaktivní extruder (pokročilé nastavení pro tiskárny typu " "MultiMaterial)" +msgid "Retraction wipe" +msgstr "Retrakce očištění" + msgid "Retractions" msgstr "Retrakce" msgid "Reverse direction of zoom with mouse wheel" msgstr "Reverzovat funkci kolečka myši při zoomu" +msgid "Reverse on odd" +msgstr "Reverzní na liché" + +msgid "Reverse threshold" +msgstr "Reverzní práh" + msgid "Revert color to default" msgstr "Vrátit barvu na výchozí" @@ -6341,16 +9156,13 @@ msgid "Right" msgstr "Zprava" msgid "Right button click the icon to change the object printable property" -msgstr "" -"Klepnutím pravým tlačítkem myši na ikonu změníte nastavení tisku pro objekt" +msgstr "Klepnutím pravým tlačítkem myši na ikonu změníte nastavení tisku pro objekt" msgid "Right button click the icon to change the object settings" msgstr "Klepnutím pravým tlačítkem myši na ikonu změníte nastavení objektu" msgid "Right button click the icon to fix STL through Netfabb" -msgstr "" -"Klepnutím pravým tlačítkem myši se spustí oprava STL souboru pomocí služby " -"Netfabb" +msgstr "Klepnutím pravým tlačítkem myši se spustí oprava STL souboru pomocí služby Netfabb" msgid "Right click" msgstr "Pravý klik" @@ -6361,6 +9173,9 @@ msgstr "Pravé tlačítko myši" msgid "Right mouse button:" msgstr "Pravé tlačítko myši:" +msgid "Right panel" +msgstr "Pravý panel" + msgid "Right Preset Value" msgstr "Hodnota pravého přednastavení" @@ -6380,15 +9195,18 @@ msgid "Rotate lower part upwards" msgstr "Otočit spodní část řezem dolů" msgid "Rotate selection 45 degrees CCW" -msgstr "Otočení výběru o 45 ° proti směru hodinových ručiček" +msgstr "Otočení výběru o 45° proti směru hodinových ručiček" msgid "Rotate selection 45 degrees CW" -msgstr "Otočení výběru o 45 ° po směru hodinových ručiček" +msgstr "Otočení výběru o 45° po směru hodinových ručiček" msgid "Rotate the model to have the lowest z height for faster print time." msgstr "" "Otočit model tak, aby měl co nejmenší výšku, čímž se zkrátí doba tisku." +msgid "Rotate the polyhole every layer." +msgstr "Otočte polyhole každou vrstvu." + msgid "Rotation" msgstr "Otáčení" @@ -6401,20 +9219,32 @@ msgstr "Úhel otočení kolem osy Y ve stupních." msgid "Rotation angle around the Z axis in degrees." msgstr "Úhel otočení kolem osy Z ve stupních." +msgid "Round corners" +msgstr "Zaoblení roh" + +msgid "Round corners for perimeters" +msgstr "Zaoblené rohy pro perimetry" + +msgid "Roundness margin" +msgstr "Zaoblený okraj" + msgid "Ruler mode" msgstr "Režim pravítka" msgid "Run %s" msgstr "Spustit %s" +msgid "Run the fan at default speed when possible" +msgstr "Pokud je to možné, spusťte ventilátor na výchozí rychlost" + msgid "Running post-processing scripts" -msgstr "Vykonávají se postprodukční skripty" +msgstr "Vykonávají se Následné-Zpracování skripty" msgid "S&end G-code" -msgstr "Od&eslat G-code" +msgstr "&Odeslat G-code" msgid "S&end to print" -msgstr "Od&eslat do tiskárny" +msgstr "&Odeslat do tiskárny" msgid "Same as top" msgstr "Stejné jako vrchní" @@ -6480,7 +9310,7 @@ msgid "Save support points?" msgstr "Uložit podpěrné body?" msgid "Save the selected options to preset \"%1%\"." -msgstr "Uloží vybraná nastaneví do přednastavení \"%1%\"." +msgstr "Uloží vybraná nastavení do přednastavení \"%1%\"." msgid "Save the selected options." msgstr "Uložte vybrané možnosti." @@ -6491,6 +9321,9 @@ msgstr "Uložit ZIP soubor jako:" msgid "Saving mesh into the 3MF container failed." msgstr "Ukládání meshe do 3MF kontejneru selhalo." +msgid "Sawtooth" +msgstr "Pilový zub" + msgid "Scale" msgstr "Měřítko" @@ -6509,14 +9342,30 @@ msgstr "Změnit velikost, aby se objekt vešel do zadaného tiskového prostoru. msgid "Scaling factor or percentage." msgstr "Procentuální měřítko." +msgid "Scattered Rectilinear" +msgstr "Přímočará" + msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "" -"Plánování nahrávání do `%1%`. Viz Okno -> Fronta nahrávaní do tiskového " -"serveru" +msgstr "Plánování nahrávání do `%1%`. Viz Okno -> Fronta nahrávaní do tiskového serveru" + +msgid "Script help page" +msgstr "Stránka nápovědy skriptu" + +msgid "Seam" +msgstr "Šev" + +msgid "Seam angle cost" +msgstr "Cena úhlu švu" + +msgid "Seam gap" +msgstr "Mezera švu" msgid "Seam painting" msgstr "Malování pozice švu" +msgid "Seam Position" +msgstr "Pozice švu" + msgid "Seam position" msgstr "Pozice švu" @@ -6526,6 +9375,9 @@ msgstr "Preferovaný směr švu" msgid "Seam preferred direction jitter" msgstr "Seam preferred direction jitter" +msgid "Seam travel cost" +msgstr "Náklady" + msgid "Seams" msgstr "Švy" @@ -6535,6 +9387,17 @@ msgstr "Vy&hledávání" msgid "Search" msgstr "Vyhledávání" +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" +"Hledejte téměř kruhové díry, které přesahují jednu vrstvu, a převeďte geometrii na " +"mnohonásobné díry. K výpočtu vícenásobné díry použijte velikost trysky a (největší) " +"průměr.\"\n" +"Viz http://hydraraptor.blogspot.com/2011/02/polyholes.html" + msgid "Search in English" msgstr "Hledat v angličtině" @@ -6559,18 +9422,28 @@ msgstr "Více." msgid "See Releases page." msgstr "Viz stránka s releasy." +msgid "Select 3d editor Tab" +msgstr "Zobrazení 3D editoru" + msgid "Select a file" msgstr "Vyberte soubor" msgid "Select a gcode file:" msgstr "Vyberte soubor gcode:" +msgid "" +"Select a goal, this will change settings to increase the effects to search." +msgstr "Vyberte cíl, tím se změní nastavení, aby se zvýšil efekt vyhledávání." + msgid "Select all objects" msgstr "Vybrat všechny objekty" msgid "Select all points" msgstr "Vybrat všechny body" +msgid "Select all standard printers in this page" +msgstr "Vyberte všechny standardní tiskárny na této stránce" + msgid "Select an action to apply to the file" msgstr "Vyberte jak chcete na soubor otevřít" @@ -6586,6 +9459,12 @@ msgstr "Vyberte souřadnicový prostor, ve kterém bude provedena transformace." msgid "Select Filament Settings Tab" msgstr "Zobrazit panel Nastavení filamentu" +msgid "Select Gcode preview Tab" +msgstr "G-Code Prohlížeč" + +msgid "Select Layer Preview Tab" +msgstr "Zobrazit panel Nastavení filamentu" + msgid "Select presets to compare" msgstr "Zvolte přednastavení k porovnání" @@ -6601,15 +9480,63 @@ msgstr "Výběr jazyka" msgid "Select the new file" msgstr "Vyberte nový soubor" +msgid "Select the number milimeters for the tower." +msgstr "Vyberte číslo extruderu." + +msgid "Select the number of tests" +msgstr "Vyberte číslo extruderu" + +msgid "" +"Select the number of tests with higher temperature than the current one." +msgstr "Vyberte počet testů s vyšší teplotou než je aktuální." + +msgid "Select the number of tests with lower temperature than the current one." +msgstr "Vyberte počet testů s nižší teplotou než je aktuální." + +msgid "" +"Select the number tower to print, and by how many degrees C to decrease each " +"time." +msgstr "Vyberte počet testů s nižší teplotou než je aktuální." + +msgid "Select the output format for this printer." +msgstr "Výstupní formát." + msgid "Select the print profiles this profile is compatible with." msgstr "Vyberte tiskové profily, s nimiž je tento profil kompatibilní." msgid "Select the printers this profile is compatible with." msgstr "Vyberte tiskárny, s nimiž je tento profil kompatibilní." +msgid "" +"Select the step in % between two tests.\n" +"Note that only multiple of 5 are engraved on the parts." +msgstr "" +"Vyberte krok v % mezi dvěma testy.\n" +"Všimněte si, že na součástech je vyryto pouze násobek 5." + +msgid "" +"Select the step in celcius between two tests.\n" +"Note that only multiple of 5 are engraved on the part." +msgstr "" +"Vyberte krok ve stupních Celsia mezi dvěma testy.\n" +"Všimněte si, že na součásti jsou vyryty pouze násobky 5." + msgid "Select the STL file to repair:" msgstr "Vyberte STL soubor k opravě:" +msgid "" +"Select this option to enforce z-lift on the first layer.\n" +"Useful to still use the lift on the first layer even if the 'Only lift Z " +"below' (retract_lift_above) is higher than 0." +msgstr "" +"Vyberte tuto možnost, chcete-li vynutit z-lift na první vrstvě.\n" +"Je užitečné stále používat zdvih na první vrstvě, i když je Pouze zdvih Z pod " +"(retract_lift_above) vyšší než 0." + +msgid "Select this option to not use/enforce the z-lift on a top surface." +msgstr "" +"Vyberte tuto možnost, pokud nechcete používat/vynucovat z-lift na horním povrchu." + msgid "Select toolbar icon size in respect to the default one." msgstr "Vyberte velikost ikon na panelu nástrojů vzhledem k výchozí velikosti." @@ -6626,40 +9553,40 @@ msgstr "" "nebo ZRUŠIT pro ponechání beze změny." msgid "Selection-Add" -msgstr "Výběr - Přidání" +msgstr "Výběr-Přidání" msgid "Selection-Add All" -msgstr "Výběr - Označení všeho" +msgstr "Výběr-Označení všeho" msgid "Selection-Add from list" -msgstr "Výběr - Přidání v seznamu" +msgstr "Výběr-Přidání v seznamu" msgid "Selection-Add from rectangle" -msgstr "Výběr - Přidání obdélníkovým výběrem" +msgstr "Výběr-Přidání obdélníkovým výběrem" msgid "Selection-Add Instance" -msgstr "Výběr - Přidání Instance" +msgstr "Výběr-Přidání Instance" msgid "Selection-Add Object" -msgstr "Výběr - Přidání Objektu" +msgstr "Výběr-Přidání Objektu" msgid "Selection-Remove" -msgstr "Výběr - Odebrání" +msgstr "Výběr-Odebrání" msgid "Selection-Remove All" -msgstr "Výběr - Zrušení" +msgstr "Výběr-Zrušení" msgid "Selection-Remove from list" -msgstr "Výběr - Odebrání v seznamu" +msgstr "Výběr-Odebrání v seznamu" msgid "Selection-Remove from rectangle" -msgstr "Výběr - Odebrání obdélníkovým výběrem" +msgstr "Výběr-Odebrání obdélníkovým výběrem" msgid "Selection-Remove Instance" -msgstr "Výběr - Odebrání Instance" +msgstr "Výběr-Odebrání Instance" msgid "Selection-Remove Object" -msgstr "Výběr - Odebrání Objektu" +msgstr "Výběr-Odebrání Objektu" msgid "Selects all objects" msgstr "Vybrat všechny objekty" @@ -6762,19 +9689,166 @@ msgid "" "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" -"Nastavte skutečnou orientaci LCD displeje uvnitř SLA tiskárny. Režim " -"Orientace na výšku převrátí význam parametrů šířky a výšky a výstupní obrazy " -"budou otočeny o 90 stupňů." +"Nastavte skutečnou orientaci LCD displeje uvnitř SLA tiskárny. Režim Orientace na " +"výšku převrátí význam parametrů šířky a výšky a výstupní obrazy budou otočeny o 90 " +"stupňů." + +msgid "" +"Set the new lift-z value for this override. 0 will disable the z-lift. -& to " +"disable. May only work on Height range modifiers." +msgstr "" +"Nastavte novou hodnotu lift-z pro toto přepsání. 0 deaktivuje z-lift. -& pro " +"deaktivaci. Může fungovat pouze s modifikátory rozsahu výšky." msgid "Set the shape of your printer's bed." msgstr "Nastavte tvar a rozměry vaší tiskové podložky." +msgid "" +"Set this if your printer uses control values from 0-100 instead of 0-255." +msgstr "Nastavte, pokud vaše tiskárna používá kontrolní hodnoty od 0-100 místo 0-255." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.05 x nozzle diameter will be used. If expressed as percentage " +"(for example 112.5%), it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Nastavte toto na nenulovou hodnotu pro nastavení ruční šířky vysunutí pro vnější " +"Perimetery. Pokud ponecháte nulu, použije se výchozí šířka vysunutí, pokud je " +"nastavena, jinak se použije 1,05 x průměr trysky. Pokud je vyjádřeno v procentech " +"(například 112,5 % ), bude vypočítána přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' Perimeteru a výchozí výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 140%) it will be computed over the " +"nozzle diameter of the nozzle used for the type of extrusion. If set to " +"zero, it will use the default extrusion width.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu, chcete-li nastavit šířku ručního " +"vytlačování pro první vrstvu. Toto můžete použít k vynucení tučnějších extrudátů " +"pro lepší přilnavost. Pokud je vyjádřeno v procentech (například 140%), bude " +"vypočítáno přes průměr trysky tryska použitá pro typ vytlačování. Pokud je " +"nastavena na nulu, použije výchozí šířku vysunutí.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' Perimeteru a výchozí výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left as zero, default extrusion width will be used if " +"set, otherwise 1.125 x nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Nastavte toto na nenulovou hodnotu, chcete-li nastavit ruční šířku vysunutí pro " +"výplň pro pevné povrchy. Pokud ponecháte hodnotu nula, použije se výchozí šířka " +"vysunutí, pokud je nastavena, jinak se použije 1,125 x průměr trysky. Pokud je " +"vyjádřeno v procentech (např. příklad 110 %) bude vypočítán přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left as zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu, chcete-li nastavit šířku ručního " +"vysunutí pro výplň pro horní povrchy. Možná budete chtít použít tenčí vytlačení k " +"vyplnění všech úzkých oblastí a získat hladší povrch. Pokud ponecháte hodnotu nula, " +"použije se výchozí šířka vysunutí pokud je nastaveno, jinak se použije průměr " +"trysky. Pokud je vyjádřen v procentech (například 110 %), bude počítán přes průměr " +"trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left as zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Nastavte toto na nenulovou hodnotu pro nastavení ruční šířky vytlačování pro výplň. " +"Pokud ponecháte nulu, použije se výchozí šířka vysunutí, pokud je nastavena, jinak " +"se použije 1,125 x průměr trysky. Možná budete chtít použít tučnější vytlačování k " +"urychlení vyplňte výplň a zpevněte díly. Pokud je vyjádřeno v procentech (například " +"110 %), bude to vypočítáno podle průměru trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 105%) " +"it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu pro nastavení šířky ručního vysunutí pro " +"Perimetery. Možná budete chtít použít tenčí vytlačování, abyste získali přesnější " +"povrchy. Pokud ponecháte nulu, použije se výchozí šířka vysunutí, pokud je " +"nastavena, jinak bude 1,125 x průměr trysky Pokud je vyjádřeno v procentech " +"(například 105 %), bude vypočítáno přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' Perimeteru a výchozí výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left as zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu, chcete-li nastavit šířku ručního " +"vysunutí pro nosný materiál. Pokud ponecháte hodnotu nula, použije se výchozí šířka " +"vysunutí, pokud je nastavena, jinak se použije průměr trysky. Pokud je vyjádřen v " +"procentech (například 110 %) bude vypočítána přes průměr trysky." + +msgid "" +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the platter.\n" +"Set zero to disable clearance checking." +msgstr "" +"Nastavte poloměr vůle kolem vašeho extruderu. Pokud extruder není vycentrován, " +"zvolte pro bezpečnost největší hodnotu. Toto nastavení se používá ke kontrole " +"kolizí a k zobrazení grafického náhledu na talíři.\n" +"Nastavte nulu pro deaktivaci kontroly vůlí." + +msgid "" +"Set this to the height moved when your Z motor (or equivalent) turns one " +"step.If your motor needs 200 steps to move your head/platter by 1mm, this " +"field should be 1/200 = 0.005.\n" +"Note that the gcode will write the z values with 6 digits after the dot if " +"z_step is set (it's 3 digits if it's disabled).\n" +"Set zero to disable." +msgstr "" +"Nastavte toto na výšku posunutou, když se motor Z (nebo ekvivalent) otočí o jeden " +"krok. Pokud váš motor potřebuje 200 kroků, aby posunul hlavu/talíř o 1 mm, toto " +"pole by mělo být 1/200 = 0,005.\n" +"Všimněte si, že gcode zapíše hodnoty z s 6 číslicemi za tečkou, pokud je nastaven " +"z_step (jsou to 3 číslice, pokud je zakázán).\n" +"Nastavit nulu pro zakázání." + msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" -"Nastavte tuto hodnotu na maximální výšku, která může být dosažena extruderem " -"během tisku." +"Nastavte tuto hodnotu na maximální výšku, která může být dosažena extruderem během " +"tisku." msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " @@ -6782,10 +9856,9 @@ msgid "" "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" -"Zadejte vertikální vzdálenost mezi tryskou a (obvykle) tyčemi osy X. Jinými " -"slovy, je to výška kolizního prostoru okolo extruderu a představuje " -"maximální hloubku, které může extruder dosáhnout před kolizí s jinými, již " -"vytištěnými, objekty." +"Zadejte vertikální vzdálenost mezi tryskou a (obvykle) tyčemi osy X. Jinými slovy, " +"je to výška kolizního prostoru okolo extruderu a představuje maximální hloubku, " +"které může extruder dosáhnout před kolizí s jinými, již vytištěnými, objekty." msgid "Set Unprintable" msgstr "Odebrán příznak Tisknout objekt" @@ -6804,19 +9877,33 @@ msgid "" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" -"Zvolte úroveň logování: 0:fatalní chyby, 1:chyby, 2:varování, 3:info, 4:" -"ladění, 5:trasování\n" +"Zvolte úroveň logování: 0:fatální chyby, 1:chyby, 2:varování, 3:info, 4:ladění, 5:" +"trasování\n" "Například. loglevel=2 zaznamenává fatální chyby, chyby a varovné zprávy." msgid "Settings" msgstr "Nastavení" +msgid "" +"Settings button: all windows are in the application, no tabs: you have to " +"clic on settings gears to switch to settings tabs." +msgstr "" +"Tlačítko Nastavení: všechna okna jsou v aplikaci, žádné karty: pro přepnutí na " +"karty nastavení musíte kliknout na ozubená kola nastavení." + msgid "Settings for height range" msgstr "Nastavení pro výškový rozsah" msgid "Settings in non-modal window" msgstr "Nastavení v nemodálním okně" +msgid "" +"Settings window: settings are displayed in their own window. You have to " +"clic on settings gears to show the settings window." +msgstr "" +"Okno nastavení: nastavení se zobrazí ve vlastním okně. Chcete-li zobrazit okno " +"nastavení, musíte kliknout na ozubená kola nastavení." + msgid "Shall I adjust those settings for supports?" msgstr "Mám upravit tato nastavení pro podpěry?" @@ -6826,6 +9913,9 @@ msgstr "Mám tato nastavení upravit tak, aby bylo možné povolit režim Váza? msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "Mám tato nastavení upravit tak, aby bylo možné povolit Čistící Věž?" +msgid "Shall I switch the brim offset to 0?" +msgstr "Mám přepnout offset límce na 0?" + msgid "Shall I switch to rectilinear fill pattern?" msgstr "Mám přepnout na přímočarý vzor výplně?" @@ -6853,6 +9943,9 @@ msgstr "Shift + Pravé tlačítko myši:" msgid "Shift objects to bed" msgstr "Posunout objekty na podložku" +msgid "Short layer time - began to increase base fan speed" +msgstr "Krátká doba vrstvy - začala se zvyšovat základní rychlost ventilátoru" + msgid "Show" msgstr "Zobrazit" @@ -6904,6 +9997,9 @@ msgstr "Zobrazit výšku objektu na pravítku" msgid "Show object/instance labels in 3D scene" msgstr "Zobrazit popisky objektů / instancí ve 3D scéně" +msgid "Show overwrite dialog." +msgstr "Zobrazit dialogové okno přepisu." + msgid "Show sidebar collapse/expand button" msgstr "Zobrazit tlačítko sbalit/rozbalit postranní panel" @@ -6922,6 +10018,12 @@ msgstr "Zobrazit podpěry" msgid "Show system information" msgstr "Zobrazit systémové informace" +msgid "Show the bed texture on the thumbnail picture." +msgstr "Ukázat texturu postele na miniaturním obrázku." + +msgid "Show the editor of the input models" +msgstr "Zobrazit editor vstupních modelů" + msgid "Show the filament settings" msgstr "Zobrazit nastavení filamentu" @@ -6931,15 +10033,24 @@ msgstr "Zobrazit kompletní seznam možností konfigurace tisku / G-codu." msgid "Show the full list of SLA print configuration options." msgstr "Zobrazit kompletní seznam možností konfigurace SLA tisku." +msgid "Show the layers from the slicing process" +msgstr "Zobrazit vrstvy z procesu slicování" + msgid "Show the list of the keyboard shortcuts" msgstr "Zobrazit seznam klávesových zkratek" +msgid "Show the preview of the gcode output" +msgstr "Zobrazit náhled výstupu gcode" + msgid "Show the print settings" msgstr "Zobrazit nastavení tisku" msgid "Show the printer settings" msgstr "Zobrazit nastavení tiskárny" +msgid "Show the supports (and pads) on the thumbnail picture." +msgstr "Zobrazit podpěry (a podložky) na obrázku miniatury." + msgid "Show this help." msgstr "Zobrazí tuto nápovědu." @@ -6953,8 +10064,7 @@ msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "Zobrazit / skrýt dialogové okno nastavení zařízení 3Dconnexion" msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" -msgstr "" -"Zobrazit/skrýt okno s nastavením 3Dconnexion zařízení, pokud je zaškrtnuto" +msgstr "Zobrazit/skrýt okno s nastavením 3Dconnexion zařízení, pokud je zaškrtnuto" msgid "Show/Hide G-code window" msgstr "Zobrazit/skrýt okno s G-code" @@ -6965,6 +10075,9 @@ msgstr "Zobrazit/skrýt legendu a odhadované tiskové časy" msgid "Show/Hide object/instance labels" msgstr "Zobrazit/skrýt popisky objektů/instancí" +msgid "Shrinkage" +msgstr "Smrštění" + msgid "Simple mode" msgstr "Jednoduchý režim" @@ -6972,7 +10085,7 @@ msgid "Single extruder MM setup" msgstr "Nastavení jednoho extruderu MM" msgid "Single Extruder Multi Material" -msgstr "MultiMaterial tisk s jedním extrudérem" +msgstr "Tisk s jedním extruderem Multi-Material" msgid "" "Single Extruder Multi Material is selected, \n" @@ -6982,8 +10095,7 @@ msgid "" msgstr "" "Je zvolená Multi Materiálová tiskárna s jedním extruderem,\n" "a proto všechny extrudery musí mít stejný průměr.\n" -"Chcete nastavit průměry všech extruderových trysek podle průměru prvního " -"extruderu?" +"Chcete nastavit průměry všech extruderových trysek podle průměru prvního extruderu?" msgid "Single extruder multimaterial parameters" msgstr "Parametry jednoho multi materiálového extruderu" @@ -6995,26 +10107,53 @@ msgid "Sinking" msgstr "Potopení" msgid "Size" -msgstr "OfFile||Velikost" +msgstr "Rozměr" msgid "Size and coordinates" msgstr "Rozměry a počátek" +msgid "Size for Gcode" +msgstr "Velikost pro G-code" + msgid "Size in X and Y of the rectangular plate." msgstr "Rozměr obdélníkové tiskové podložky v ose X a Y." +msgid "Size of the tab icons, in pixels. Set to 0 to remove icons." +msgstr "Velikost ikon karet v pixelech. Nastavením na 0 ikony odstraníte." + +msgid "" +"Skinnydip performs a secondary dip into the meltzone to burn off fine " +"strings of filament" +msgstr "" +"Skinnydip provádí sekundární ponoření do zóny tání, aby spálilo jemné vlákna vlákna" + msgid "Skirt" msgstr "Obrys" +msgid "skirt" +msgstr "Obrys" + +msgid "Skirt & Brim" +msgstr "Obrys a límec" + msgid "Skirt and brim" msgstr "Obrys a límec" +msgid "Skirt brim" +msgstr "Obrys límce" + +msgid "Skirt distance from brim" +msgstr "Vzdálenost Obrysu od límce" + msgid "Skirt height" msgstr "Výška obrysu" msgid "Skirt Loops" msgstr "Počet obrysových smyček" +msgid "Skirt width" +msgstr "Šířka obrysu" + msgid "Skirt/Brim" msgstr "Obrys/Límec" @@ -7051,19 +10190,12 @@ msgstr "SLA Podpěrné Body" msgid "SLA supports outside the print area were detected." msgstr "Byly zjištěny SLA podpěry mimo tiskovou oblast." -msgid "" -"Slic3r can upload G-code files to a printer host. This field must contain " -"the kind of the host." -msgstr "" -"Slic3r může nahrát soubory G-code do tiskového serveru. Toto pole musí " -"obsahovat druh tiskového serveru." - msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" -"Slic3r může nahrát soubory do tiskového serveru. Toto pole by mělo obsahovat " -"klíč API požadovaný pro ověření." +"Slic3r může nahrát soubory do tiskového serveru. Toto pole by mělo obsahovat klíč " +"API požadovaný pro ověření." msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " @@ -7072,11 +10204,20 @@ msgid "" "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" -"Slic3r může nahrávat G-cody do tiskového serveru. Toto pole by mělo " -"obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " -"tiskovému serveru za HAProxy se zapnutým ověřením basic auth lze přistupovat " -"zadáním uživatelského jména a hesla do adresy URL v následujícím formátu: " -"https://username: password@your-octopi-address/" +"Slic3r může nahrávat G-cody do tiskového serveru. Toto pole by mělo obsahovat název " +"hostitele, IP adresu nebo URL tiskového serveru. K tiskovému serveru za HAProxy " +"se zapnutým ověřením basic auth lze přistupovat zadáním uživatelského jména a hesla " +"do adresy URL v následujícím formátu: https://username: password@your-octopi-" +"address/" + +msgid "Slic3r logo designed by Corey Daniels." +msgstr "Logo Slic3r navrhl Corey Daniels." + +msgid "Slic3r Manual" +msgstr "Manuál Slic3r" + +msgid "Slic3r will never scale the speed below this one." +msgstr "Slic3r nikdy nezvýší rychlost pod tuto." msgid "Slice" msgstr "Slicovat" @@ -7115,6 +10256,9 @@ msgstr "Informace o slicování" msgid "Sliced object \"%1%\" looks like a logo or a sign" msgstr "Slicovaný objekt \"%1%\" vypadá jako logo nebo nápis" +msgid "Sliced preview" +msgstr "Náhled na Slicování" + msgid "Slicing" msgstr "Slicování" @@ -7133,8 +10277,7 @@ msgstr "Slicování dokončeno." msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" -"Slicování muselo být zastaveno kvůli vnitřní chybě: Nekonzistentní index " -"řezů." +"Slicování muselo být zastaveno kvůli vnitřní chybě: Nekonzistentní index řezů." msgid "Slicing Mode" msgstr "Režim slicování" @@ -7154,6 +10297,15 @@ msgstr "Zpomalit tisk pokud je doba tisku kratší než" msgid "Slow tilt" msgstr "Pomalý náklon" +msgid "Small" +msgstr "Malý" + +msgid "Small perimeter speed" +msgstr "Rychlost malých perimetrů" + +msgid "Small perimeters speed" +msgstr "Rychlost na malých Perimetrech" + msgid "Small pillar diameter percent" msgstr "Procentní průměr malých pilířů" @@ -7176,7 +10328,7 @@ msgid "Snug" msgstr "Přiléhavý" msgid "Solid" -msgstr "Plný" +msgstr "Plná Výplň" msgid "Solid " msgstr "Plný " @@ -7185,7 +10337,7 @@ msgid "Solid infill" msgstr "Plná výplň" msgid "solid infill" -msgstr "plná výplň" +msgstr "Plná výplň" msgid "Solid infill every" msgstr "Plná výplň každou" @@ -7193,12 +10345,24 @@ msgstr "Plná výplň každou" msgid "Solid infill extruder" msgstr "Extruder pro plnou výplň" +msgid "Solid infill spacing" +msgstr "Mezera pevné výplně" + +msgid "Solid infill speed" +msgstr "Rychlost plné výplně" + msgid "Solid infill threshold area" msgstr "Prahová oblast s plnou výplní" +msgid "Solid infill width" +msgstr "Šířka plné výplně" + msgid "Solid layers" msgstr "Plných vrstev" +msgid "Solid spacing" +msgstr "Pevné rozestupy" + msgid "Soluble material" msgstr "Rozpustný materiál" @@ -7208,12 +10372,23 @@ msgstr "Rozpustný materiál je převážně používán pro tisk rozpustných p msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" -"Některá pole jsou příliš dlouhá a nevejdou se. Kliknutím pravým tlačítkem " -"myši zobrazíte celý text." +"Některá pole jsou příliš dlouhá a nevejdou se. Kliknutím pravým tlačítkem myši " +"zobrazíte celý text." msgid "Some filaments were uninstalled." msgstr "Některé filamenty byly odinstalovány." +msgid "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." +msgstr "" +"Některé příkazy G/M-kódu, včetně ovládání teploty a dalších, nejsou univerzální. " +"Nastavte tuto možnost na firmware vaší tiskárny, abyste získali kompatibilní " +"výstup. Příchuť \"No extrusion\" zabraňuje Slic3r exportovat jakoukoli hodnotu " +"extruze." + msgid "Some objects are not visible during editing." msgstr "Některé objekty nejsou během úprav viditelné." @@ -7222,17 +10397,16 @@ msgstr "Některé objekty jsou příliš blízko; Extruder do nich narazí." msgid "" "Some objects are too tall and cannot be printed without extruder collisions." -msgstr "" -"Některé objekty jsou příliš vysoké a nelze je tisknout bez kolizí extruderu." +msgstr "Některé objekty jsou příliš vysoké a nelze je tisknout bez kolizí extruderu." msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" -"Některé objekty mohou být na několika menších podložkách namísto jedné " -"velké. Tento parametr definuje, jak daleko může být střed dvou menších " -"podložek. Pokud budou blíže, budou sloučeny do jedné podložky." +"Některé objekty mohou být na několika menších podložkách namísto jedné velké. Tento " +"parametr definuje, jak daleko může být střed dvou menších podložek. Pokud budou " +"blíže, budou sloučeny do jedné podložky." msgid "" "Some presets are modified and the unsaved changes will not be captured by " @@ -7252,8 +10426,8 @@ msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" -"Některé tiskárny nebo nastavení tiskárny mohou mít potíže s tiskem s " -"proměnnou výškou vrstvy. Ve výchozím nastavení je zapnuto." +"Některé tiskárny nebo nastavení tiskárny mohou mít potíže s tiskem s proměnnou " +"výškou vrstvy. Ve výchozím nastavení je zapnuto." msgid "Some Printers were uninstalled." msgstr "Některé tiskárny byly odinstalovány." @@ -7264,20 +10438,35 @@ msgstr "Některé SLA materiály byly odinstalovány." msgid "Spacing" msgstr "Vzdálenost" +msgid "spacing" +msgstr "Vzdálenost" + msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" -"Rozteč linií kontaktních vrstev. Nastavte nulu pro získání plných " -"kontaktních vrstev." +"Rozteč linií kontaktních vrstev. Nastavte 0 pro získání plných kontaktních " +"vrstev." + +msgid "Spacing between ironing lines" +msgstr "Rozteč mezi ironing linkami" msgid "Spacing between support material lines." msgstr "Rozteč linií podpěr." +msgid "Sparse" +msgstr "Výplň" + +msgid "Sparse infill speed" +msgstr "Spojení řídkých výplňových čar" + msgid "Speed" msgstr "Rychlost" msgid "Speed (mm/s)" msgstr "Rychlost (mm/s)" +msgid "Speed for milling tool." +msgstr "Rychlost pro frézovací nástroj." + msgid "" "Speed for movements along the Z axis.\n" "When set to zero, the value is ignored and regular travel speed is used " @@ -7293,15 +10482,39 @@ msgstr "Netiskové rychlosti" msgid "Speed for print moves" msgstr "Rychlosti pohybů tiskárny" +msgid "" +"Speed for printing the bridges that support the top layer.\n" +"Can be a % of the bridge speed." +msgstr "" +"Rychlost tisku mostů, které podporují horní vrstvu.\n" +"Může to být % z rychlosti mostu." + msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "Rychlost posunů (přejezdy mezi body extruze)." +msgid "" +"Speed in mm/s of the wipe. If it's faster, it will try to go further away, " +"as the wipe time is set by ( 100% - 'retract before wipe') * 'retaction " +"length' / 'retraction speed'.\n" +"If set to zero, the travel speed is used." +msgstr "" +"Rychlost stírání v mm/s. Pokud je rychlejší, pokusí se jet dále, protože doba " +"stírání je nastavena pomocí ( 100 % - 'zatažení před setřením') * 'délka zpětné " +"vazby' / 'rychlost zatažení'. \n" +"Pokud je nastaveno na nulu, použije se rychlost pojezdu." + msgid "Speed of the first cooling move" msgstr "Rychlost prvního pohybu chlazení" msgid "Speed of the last cooling move" msgstr "Rychlost posledního pohybu chlazení" +msgid "Speed to extract from melt zone" +msgstr "Rychlost extrakce ze zóny tání" + +msgid "Speed to move into melt zone" +msgstr "Rychlost přesunu do zóny tání" + msgid "Speed used at the very beginning of loading phase. " msgstr "Rychlost použitá na samém počátku zaváděcí fáze. " @@ -7312,18 +10525,20 @@ msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming). " msgstr "" -"Rychlost vysouvání filamentu při výměně na čistící věži (úvodní část " -"vysunutí okamžitě po rapidní extruzi není ovlivněna). " +"Rychlost vysouvání filamentu při výměně na čistící věži (úvodní část vysunutí " +"okamžitě po rapidní extruzi není ovlivněna). " msgid "" "Speed used for unloading the tip of the filament immediately after ramming. " msgstr "" -"Rychlost použitá při vysouvání špičky filamentu bezprostředně po rapidní " -"extruzi. " +"Rychlost použitá při vysouvání špičky filamentu bezprostředně po rapidní extruzi. " msgid "Speed:" msgstr "Rychlost:" +msgid "Speedup time" +msgstr "Čas zrychlení" + msgid "Sphere" msgstr "Koule" @@ -7333,6 +10548,12 @@ msgstr "Spirálová Váza" msgid "Spiral vase" msgstr "Spirálová váza" +msgid "Splash screen" +msgstr "Úvodní obrazovka" + +msgid "Splash screen image" +msgstr "Obrázek úvodní obrazovky" + msgid "Split" msgstr "Rozdělit" @@ -7363,6 +10584,16 @@ msgstr "Přetečení zásobníku" msgid "Standard" msgstr "Běžné" +msgid "Standard Cube" +msgstr "Standardní kostka" + +msgid "" +"Standard cubic xyz cube, with a flat top. Better for infill/perimeter " +"overlap calibration." +msgstr "" +"Standardní krychle xyz krychle s plochým vrcholem. Lepší pro kalibraci výplně/" +"přesahu perimetru." + msgid "Stars" msgstr "Hvězdy" @@ -7378,8 +10609,11 @@ msgstr "Začátek G-code" msgid "Start new slicing process" msgstr "Zahájit nový slicovací proces" +msgid "Start temp:" +msgstr "Počáteční teplota:" + msgid "Start the application" -msgstr "Spusťit aplikaci" +msgstr "Spustit aplikaci" msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " @@ -7398,17 +10632,17 @@ msgid "" "\n" "What do you want to do now?" msgstr "" -"Počínaje %1% 2.3 se konfigurační adresář v systému Linux změnil (podle " -"specifikace XDG Base Directory) na %2%.\n" +"Počínaje %1% 2.3 se konfigurační adresář v systému Linux změnil (podle specifikace " +"XDG Base Directory) na %2%.\n" "\n" "Tento adresář ještě neexistoval (možná používáte novou verzi poprvé).\n" "Byl však zjištěn starý konfigurační adresář %1% v\n" "%3%.\n" "\n" -"Zvažte přesunutí obsahu starého adresáře do nového umístění za účelem " -"přístupu k vašim profilům atd.\n" -"Pamatujte, že pokud se v budoucnu rozhodnete %1% downgradovat, použije znovu " -"staré umístění.\n" +"Zvažte přesunutí obsahu starého adresáře do nového umístění za účelem přístupu k " +"vašim profilům atd.\n" +"Pamatujte, že pokud se v budoucnu rozhodnete %1% downgradovat, použije znovu staré " +"umístění.\n" "\n" "Co chcete udělat?" @@ -7418,6 +10652,12 @@ msgstr "Stav" msgid "Status:" msgstr "Stav:" +msgid "" +"Stay in melt zone for this amount of time before extracting the filament. " +"Not usually necessary." +msgstr "" +"Zůstaňte v zóně tání po tuto dobu, než vytáhnete vlákno. Obvykle to není nutné." + msgid "Stealth" msgstr "Tichý" @@ -7427,6 +10667,12 @@ msgstr "Tichý režim" msgid "stealth mode" msgstr "tichý režim" +msgid "Step:" +msgstr "Krok:" + +msgid "Steps:" +msgstr "Kroky:" + msgid "Stop at height" msgstr "Skončit ve výšce" @@ -7452,8 +10698,14 @@ msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" -"Odpojení proběhlo úspěšné. Zařízení %s(%s) lze nyní bezpečně odebrat z " -"počítače." +"Odpojení proběhlo úspěšné. Zařízení %s(%s) lze nyní bezpečně odebrat z počítače." + +msgid "" +"SuperSlicer is a skinned version of Slic3r, based on PrusaSlicer by Prusa " +"and the original Slic3r by Alessandro Ranellucci & the RepRap community." +msgstr "" +"SuperSlicer je skinovaná verze Slic3r, založená na PrusaSlicer od Prusa a původní " +"Slic3r od Alessandra Ranellucciho a komunity RepRap." msgid "support" msgstr "podpěry" @@ -7470,6 +10722,9 @@ msgstr "Bezpečná vzdálenost podpěrné základny" msgid "Support Blocker" msgstr "Blokátor podpěr" +msgid "Support contact distance type" +msgstr "Typ vzdálenosti kontaktu podpory" + msgid "Support Cubic" msgstr "Kubický podepíraný" @@ -7485,21 +10740,57 @@ msgstr "Hrot podpěry" msgid "support interface" msgstr "kontaktní vrstva podpěr" +msgid "Support interface pattern" +msgstr "Vzor kontaktní vrstvy podpěr" + +msgid "Support interface speed" +msgstr "Rychlost kontaktní vrstvy podpěr" + msgid "Support material" msgstr "Podpěry" +msgid "support material" +msgstr "Podpěry" + +msgid "Support material extruder" +msgstr "Extrudér podpůrného materiálu" + msgid "Support material interface" msgstr "Kontaktní vrstvy podpěr" +msgid "Support material width" +msgstr "Šířka nosného materiálu" + +msgid "" +"Support material will not be generated for overhangs whose slope angle (90° " +"= vertical) is above the given threshold. In other words, this value " +"represent the most horizontal slope (measured from the horizontal plane) " +"that you can print without support material. Set zero for automatic " +"detection (recommended)." +msgstr "" +"Podpěrný materiál nebude generován pro převisy, jejichž úhel sklonu (90° = " +"vertikální) je nad daným prahem. Jinými slovy, tato hodnota představuje nejvíce " +"horizontální sklon (měřeno od horizontální roviny), který můžete vytisknout bez " +"podpůrného materiálu. Nastavte nulu pro automatickou detekci (doporučeno)." + msgid "Support material/raft interface extruder" msgstr "Extruder pro kontaktní podpěry/raft" msgid "Support on build plate only" msgstr "Pouze na tiskové podložce" +msgid "Support on thumbnail" +msgstr "Podpora na miniatuře" + msgid "Support parameter change" msgstr "Změna nastavení podpěr" +msgid "Support pattern" +msgstr "Vzor podpory" + +msgid "Support pattern angle" +msgstr "Úhel nosného vzoru" + msgid "Support pillar" msgstr "Podpěrný pilíř" @@ -7509,6 +10800,12 @@ msgstr "Hustota podpěrných bodů" msgid "Support points edit" msgstr "Úprava podpěrných bodů" +msgid "Support speed" +msgstr "Rychlost podpěr" + +msgid "Supporting dense layer" +msgstr "Podpůrná hustá vrstva" + msgid "Supports" msgstr "Podpěry" @@ -7518,9 +10815,19 @@ msgstr "podpěry a podložka" msgid "Supports remaining times" msgstr "Podpora zbývajících tiskových časů" +msgid "Supports remaining times method" +msgstr "Podporuje metodu zbývajících časů" + msgid "Supports stealth mode" msgstr "Podporuje tichý režim" +msgid "" +"Supports work better, if the following feature is enabled:\n" +"- overhangs with bridge speed & fan" +msgstr "" +"Podpory fungují lépe, pokud je povolena následující funkce:\n" +"- převisy s rychlostí mostu a ventilátorem" + msgid "Suppress \" - default - \" presets" msgstr "Potlačit “ - výchozí - “ přednastavení" @@ -7528,8 +10835,8 @@ msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" -"Potlačit “ - výchozí - “ přednastavení v nabídkách Tisk / Filament / " -"Tiskárna, jakmile budou k dispozici další platné předvolby." +"Potlačit “ - výchozí - “ přednastavení v nabídkách Tisk / Filament / Tiskárna, " +"jakmile budou k dispozici další platné předvolby." msgid "Suppress to open hyperlink in browser" msgstr "Potlačit otevírání hypertextových odkazů v prohlížeči" @@ -7543,6 +10850,9 @@ msgstr "Zaměnit osy Y/Z" msgid "Switch between Editor/Preview" msgstr "Přepínání mezi Editorem/Náhledem" +msgid "Switch between Tab" +msgstr "Přepnout mezi záložkou" + msgid "Switch code to Change extruder" msgstr "Zaměnit za příkaz na Změnu extruderu" @@ -7552,12 +10862,25 @@ msgstr "Zaměnit za příkaz na Změnu barvy (%1%) pro:" msgid "Switch to editing mode" msgstr "Přepnout do režimu editace" +msgid "Switch to Preview when sliced" +msgstr "Při Slicování přepnout na náhled" + msgid "Switch to Settings" msgstr "Přepnout do Nastavení" +msgid "Switch when possible" +msgstr "Prepnout kdyz je to mozne" + msgid "Switching Presets: Unsaved Changes" msgstr "Přepnutí na jiné přednastavení: Neuložené změny" +msgid "" +"Switching the language will trigger application restart.\n" +"You will lose content of the platter." +msgstr "" +"Přepnutí jazyka spustí restart aplikace.\n" +"Přijdete o obsah talíře." + msgid "" "Switching the printer technology from %1% to %2%.\n" "Some %1% presets were modified, which will be lost after switching the " @@ -7573,8 +10896,7 @@ msgid "" "\n" "Do you want to proceed?" msgstr "" -"Přepnutím do jednoduchého nastavení ztratíte změny provedené v pokročilém " -"režimu!\n" +"Přepnutím do jednoduchého nastavení ztratíte změny provedené v pokročilém režimu!\n" "\n" "Opravdu chcete pokračovat?" @@ -7585,8 +10907,8 @@ msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" -"Synchronizování vrstev podpěr s vrstvami objektu. Toto je velmi užitečné u " -"multi-materiálových tiskáren, kde je přepínání extruderů drahé." +"Synchronizování vrstev podpěr s vrstvami objektu. Toto je velmi užitečné u multi-" +"materiálových tiskáren, kde je přepínání extruderů drahé." msgid "Synchronize with object layers" msgstr "Synchronizovat s vrstvami objektu" @@ -7600,6 +10922,14 @@ msgstr "Systémové informace" msgid "System presets" msgstr "Systémová přednastavení" +msgid "Tab icon size" +msgstr "Velikost ikony karty" + +msgid "" +" Tab layout: all windows are in the application, all are selectable via a " +"tab." +msgstr " Rozložení karet: všechna okna jsou v aplikaci, všechna lze vybrat pomocí záložka." + msgid "Take Configuration &Snapshot" msgstr "Prové&st Zálohu konfigurace" @@ -7609,24 +10939,35 @@ msgstr "Pořizování konfiguračního snapshotu" msgid "Taking a configuration snapshot failed." msgstr "Pořizování konfiguračního snapshotu selhalo." +msgid "Temp" +msgstr "Teplota" + +msgid "Temp decr:" +msgstr "Snížení teploty:" + msgid "Temperature" msgstr "Teplota" msgid "Temperature (°C)" msgstr "Teplota (°C)" +msgid "Temperature calibration" +msgstr "Kalibrace teploty" + msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" -"Teplotní rozdíl, který se použije v případě, že extruder není aktivní. " -"Umožňuje “obětní” obrysy v plné výšce objektu, na kterém jsou trysky " -"periodicky očištěny." +"Teplotní rozdíl, který se použije v případě, že extruder není aktivní. Umožňuje " +"“obětní” obrysy v plné výšce objektu, na kterém jsou trysky periodicky očištěny." msgid "Temperature variation" msgstr "Kolísání teploty" +msgid "Temperature °C" +msgstr "Teplota °C" + msgid "Temperatures" msgstr "Teploty" @@ -7636,6 +10977,9 @@ msgstr "Šablona s vlastním G-code" msgid "Test" msgstr "Test" +msgid "Test Flow Ratio" +msgstr "Poměr zkušebního průtoku" + msgid "Text colors" msgstr "Podbarvení textu" @@ -7653,8 +10997,8 @@ msgid "" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" -"Zařízení %s nebylo nalezeno. Pokud je zařízení připojeno, stiskněte tlačítko " -"Reset vedle USB konektoru ..." +"Zařízení %s nebylo nalezeno. Pokud je zařízení připojeno, stiskněte tlačítko Reset " +"vedle USB konektoru ..." msgid "" "The active configuration was created by %1% %2%,\n" @@ -7673,6 +11017,22 @@ msgstr "" "Pokud ano, bude aktivní konfigurace před importem nové konfigurace " "zálohována." +msgid "" +"The convex holes will be grown / shrunk in the XY plane by the configured " +"value (negative = inwards, positive = outwards, should be negative as the " +"holes are always a bit smaller irl). This might be useful for fine-tuning " +"hole sizes.\n" +"This setting behaves the same as 'Inner XY size compensation' but only for " +"convex shapes. It's added to 'Inner XY size compensation', it does not " +"replace it. " +msgstr "" +"Konvexní otvory se zvětší/smrští v rovině XY o nakonfigurovanou hodnotu (záporný = " +"dovnitř, pozitivní = ven, měl by být negativní, protože otvory jsou vždy o něco " +"menší). To může být užitečné pro jemné doladění velikosti otvorů .\n" +"Toto nastavení se chová stejně jako 'Kompenzace velikosti vnitřní XY', ale pouze " +"pro konvexní tvary. Je přidáno do 'Kompenzace velikosti vnitřní XY', nenahrazuje " +"ji. " + msgid "" "The current custom preset will be detached from the parent system preset." msgstr "" @@ -7687,21 +11047,29 @@ msgid "" "once the rotation is embedded into the object coordinates." msgstr "" "Momentálně upravovaný objekt je pootočený (rotační úhly nejsou násobky 90°). " -"Nejednotné škálování nakloněných objektů je ve světových koordinátech možné " -"pouze tehdy, když je informace o rotacích zapsána do koordinátů daného " -"objektu." +"Nejednotné škálování nakloněných objektů je ve světových koordinátech možné pouze " +"tehdy, když je informace o rotacích zapsána do koordinátů daného objektu." msgid "The default angle for connecting support sticks and junctions." msgstr "Výchozí úhel pro připojení nosných tyčí a spojek." +msgid "The distance is computed from the brim and not from the objects" +msgstr "Vzdálenost se počítá od okraje a ne od objektů" + msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" -"Konce podpěrných sloupů budou rozmístěny mezi předmět a podložku. Proto musí " -"být „Bezpečná vzdálenost podpěrné základny“ větší než parametr „Mezera " -"Podložka-Objekt“." +"Konce podpěrných sloupů budou rozmístěny mezi předmět a podložku. Proto musí být " +"„Bezpečná vzdálenost podpěrné základny“ větší než parametr „Mezera Podložka-Objekt“." + +msgid "" +"The extruder to use (unless more specific extruder settings are specified) " +"for the first layer." +msgstr "" +"Extrudér, který se má použít (pokud nejsou specifikována konkrétnější nastavení " +"extrudéru) pro první vrstvu." msgid "" "The extruder to use (unless more specific extruder settings are specified). " @@ -7709,27 +11077,32 @@ msgid "" "extruders." msgstr "" "Extruder, který chcete použít (pokud nejsou zvoleny specifičtější nastavení " -"extruderu). Tato hodnota přepíše nastavení perimetrového a výplňového " -"exrtuderu, ale ne nastavení extruderu pro podpěry." +"extruderu). Tato hodnota přepíše nastavení perimetrového a výplňového exrtuderu, " +"ale ne nastavení extruderu pro podpěry." msgid "The extruder to use when printing infill." msgstr "Extruder který se použije pro tisk výplní." msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." -msgstr "" -"Extruder, který se používá při tisku perimetrů a límce. První extruder je 1." +msgstr "Extruder, který se používá při tisku perimetrů a límce. První extruder je 1." msgid "The extruder to use when printing solid infill." msgstr "Extruder který bude použit při tisku plných výplní." +msgid "" +"The extruder to use when printing support material (1+, 0 to use the current " +"extruder to minimize tool changes)." +msgstr "" +"Extrudér, který se má použít při tisku podpůrného materiálu (1+, 0 pro použití " +"aktuálního extrudéru k minimalizaci změn nástroje)." + msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" -"Extruder, který se použije při tisku kontaktních vrstev podpěr (1+, 0 pro " -"použití aktuálního extruderu, aby se minimalizovaly změny nástroje). To " -"ovlivňuje i raft." +"Extruder, který se použije při tisku kontaktních vrstev podpěr (1+, 0 pro použití " +"aktuálního extruderu, aby se minimalizovaly změny nástroje). To ovlivňuje i raft." msgid "The filament material type for use in custom G-codes." msgstr "Typ filamentu pro použití ve vlastních G-code." @@ -7744,6 +11117,15 @@ msgstr "" msgid "The firmware supports stealth mode" msgstr "Firmware podporuje tichý režim" +msgid "" +"The first layer will be grown / shrunk in the XY plane by the configured " +"value to compensate for the 1st layer squish aka an Elephant Foot effect. " +"(should be negative = inwards)" +msgstr "" +"První vrstva se zvětší / smrští v rovině XY o nakonfigurovanou hodnotu, aby se " +"kompenzovalo smáčknutí 1. vrstvy neboli efekt sloní nohy. (mělo by být záporné = " +"dovnitř)" + msgid "The following characters are not allowed by a FAT file system:" msgstr "Následující znaky nejsou v souborovém systému FAT povoleny:" @@ -7796,8 +11178,8 @@ msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" -"Následující zkratky jsou použitelné v náhledu G-codu, když je aktivní " -"vodorovný posuvník" +"Následující zkratky jsou použitelné v náhledu G-codu, když je aktivní vodorovný " +"posuvník" msgid "" "The following shortcuts are applicable in G-code preview when the vertical " @@ -7808,8 +11190,7 @@ msgstr "" msgid "" "The following shortcuts are applicable when the specified gizmo is active" -msgstr "" -"Následující klávesové zkratky jsou funkční při patřičném aktivním gizmu" +msgstr "Následující klávesové zkratky jsou funkční při patřičném aktivním gizmu" msgid "The following SLA printer models have no materials selected:" msgstr "Následující modely SLA tiskáren nemají vybrané žádné materiály:" @@ -7824,8 +11205,16 @@ msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" -"Mezera mezi spodkem objektu a generovanou podložkou v režimu nulového " -"nadzvednutí." +"Mezera mezi spodkem objektu a generovanou podložkou v režimu nulového nadzvednutí." + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" +"Geometrie bude decimována před detekcí ostrých úhlů. Tento parametr udává minimální " +"délku odchylky pro decimaci.\n" +"0 pro deaktivaci" msgid "The height of the pillar base cone" msgstr "Výška ukotvení podpěrného kužele" @@ -7837,12 +11226,20 @@ msgstr "" "Importovaný archiv SLA neobsahoval žádné přednastavení. Aktuální SLA " "přednastavení bylo použito jako záložní." +msgid "" +"The infill / perimeter encroachment can't be higher than half of the " +"perimeter width.\n" +"Are you sure to use this value?" +msgstr "" +"Zasahování výplně / perimetru nemůže být větší než polovina šířky perimetru.\n" +"Opravdu použijete tuto hodnotu?" + msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" -"Poslední změny barev byly uloženy pro tisk s více extrudery se změnami " -"nástrojů během celého tisku." +"Poslední změny barev byly uloženy pro tisk s více extrudery se změnami nástrojů " +"během celého tisku." msgid "The last color change data was saved for a multi extruder printing." msgstr "Poslední změny barev byly uloženy pro tisk s více extrudery." @@ -7854,20 +11251,36 @@ msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" -"Maximální vzdálenost dvou podpůrných pilířů pro vzájemné provázání. Nulová " -"hodnota zakáže provazování." +"Max vzdálenost dvou podpůrných pilířů pro vzájemné provázání. Nulová hodnota zakáže " +"provazování." msgid "The max length of a bridge" -msgstr "Maximální délka přemostění" +msgstr "Max délka přemostění" + +msgid "" +"The maximum detour length for avoid crossing perimeters. If the detour is " +"longer than this value, avoid crossing perimeters is not applied for this " +"travel path. Detour length can be specified either as an absolute value or " +"as percentage (for example 50%) of a direct travel path." +msgstr "" +"Maximální délka objížďky pro vyhnutí se perimetrům přechodu. Pokud je objížďka " +"delší než tato hodnota, nepoužije se perimetry vyhnutí se přechodu pro tuto " +"cestovní trasu. Délku objížďky lze zadat buď jako absolutní hodnotu, nebo v " +"procentech (například 50 %) přímou cestovní cestu." + +msgid "" +"The milling cutter to use (unless more specific extruder settings are " +"specified). " +msgstr "Fréza k použití (pokud není specifikováno přesnější nastavení extruderu). " msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" -"Minimální vzdálenost základny podpěr od modelu v mm. Dává smysl v režimu " -"nulového nadzvednutí nad podložku, kde je mezera podle tohoto parametru " -"vložena mezi model a podložku." +"Minimální vzdálenost základny podpěr od modelu v mm. Dává smysl v režimu nulového " +"nadzvednutí nad podložku, kde je mezera podle tohoto parametru vložena mezi model a " +"podložku." msgid "The name cannot be empty." msgstr "Název nesmí být prázdný." @@ -7885,36 +11298,69 @@ msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" -"Počet spodních plných vrstev je navýšen nad zadaný počet " -"bottom_solid_layers, je-li to nutné k dosažení minimální tloušťky spodní " -"skořepiny." +"Počet spodních plných vrstev je navýšen nad zadaný počet bottom_solid_layers, je-li " +"to nutné k dosažení minimální tloušťky spodní skořepiny." + +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be gradually shrunk less, up to the layer indicated by " +"this value." +msgstr "" +"Počet vrstev, na kterých bude aktivní kompenzace sloní nohy. První vrstva se " +"zmenšuje o hodnotu kompenzace sloní nohy, další vrstvy se pak postupně zmenšují až " +"na vrstvu označenou touto hodnotou." msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" -"Počet vrchních plných vrstev je navýšen nad zadaný počet top_solid_layers, " -"je-li to nutné k dosažení minimální tloušťky vrchní skořepiny. Zabrání se " -"tak tzv. „pillowing“ efektu při tisku s proměnnou výškou vrstvy." +"Počet vrchních plných vrstev je navýšen nad zadaný počet top_solid_layers, je-li to " +"nutné k dosažení minimální tloušťky vrchní skořepiny. Zabrání se tak tzv. " +"„pillowing“ efektu při tisku s proměnnou výškou vrstvy." msgid "The object is too small" msgstr "Objekt je příliš malý" +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'exterior' shell of the object.\n" +" !!! it's recommended you put the same value into the 'Inner XY size " +"compensation', unless you are sure you don't have horizontal holes. !!! " +msgstr "" +"Objekt se zvětší/zmenší v rovině XY o nakonfigurovanou hodnotu (záporná = dovnitř, " +"kladná = ven). To může být užitečné pro jemné doladění velikostí.\n" +"Toto platí pouze pro 'vnější' plášť objektu.\n" +" !!! doporučujeme zadat stejnou hodnotu do 'Kompenzace vnitřní velikosti XY', pokud " +"si nejste jisti, že nemáte vodorovné otvory. !!! " + +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'inner' shell of the object (!!! horizontal " +"holes break the shell !!!)" +msgstr "" +"Objekt se zvětší/zmenší v rovině XY o nakonfigurovanou hodnotu (záporná = dovnitř, " +"kladná = ven). To může být užitečné pro jemné doladění velikostí.\n" +"Tohle platí pouze pro 'vnitřní' plášť předmětu (!!! horizontální otvory rozbijí " +"plášť !!!)" + msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" -"Objekt se zvýší tímto počtem vrstev a pod ním bude vytvořen podpůrný " -"materiál." +"Objekt se zvýší tímto počtem vrstev a pod ním bude vytvořen podpůrný materiál." msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" -"Procentuální velikost menších podpěrných pilířů oproti průměru normálních " -"pilířů. Menší pilíře jsou použity v problematických místech, kam se normální " -"nevejdou." +"Procentuální velikost menších podpěrných pilířů oproti průměru normálních pilířů. " +"Menší pilíře jsou použity v problematických místech, kam se normální nevejdou." msgid "" "The percentage of the bed area. \n" @@ -7961,11 +11407,27 @@ msgstr[3] "" "Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " "chystáte odstranit." +msgid "" +"The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/" +"natural, 0.2-0.5 for white and 1 for black." +msgstr "" +"Pigment % pro toto vlákno (mezi 0 a 1, 1 = 100%). 0 pro průsvitné/přirozené, " +"0,2-0,5 pro bílé a 1 pro černé." + msgid "" "The places where the brim will be printed around each object on the first " "layer." msgstr "Místa, kde bude kolem každého objektu v první vrstvě vytištěn límec." +msgid "" +"The position of the model origin (point with coordinates x:0, y:0, z:0) " +"needs to be in the middle of the print bed area. If you load a custom model " +"and it appears misaligned, the origin is not set properly." +msgstr "" +"Pozice počátku modelu (bod se souřadnicemi x:0, y:0, z:0) musí být uprostřed " +"oblasti tiskové podložky. Pokud načtete vlastní model a zdá se, že není zarovnaný, " +"počátek není správně nastavit." + msgid "" "The preset below was temporarily installed on the active instance of " "PrusaSlicer" @@ -8031,8 +11493,7 @@ msgstr "Vybraný soubor neobsahuje geometrii." msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" -"Vybraný soubor obsahuje několik nespojených ploch. Tato možnost není " -"podporována." +"Vybraný soubor obsahuje několik nespojených ploch. Tato možnost není podporována." msgid "" "The selected object couldn't be split because it contains only one part." @@ -8068,6 +11529,13 @@ msgstr "" "Není možné použít jakýkoliv vlastní G-kód pro objekty tisknuté sekvenčně.\n" "Během generování G-kódu nebude tento kód zpracován." +msgid "" +"The settings have a lock and dot to show how they are modified. You can hide " +"them by uncheking this option." +msgstr "" +"Nastavení jsou opatřena zámkem a tečkou, aby bylo vidět, jak jsou upravena. Můžete " +"je skrýt zrušením zaškrtnutí této možnosti." + msgid "The size of the object can be specified in inches" msgstr "Velikost objektu lze určit v palcích" @@ -8081,16 +11549,29 @@ msgstr "" "SLA archiv neobsahuje žádné přednastavení. Před importem tohoto SLA archivu " "nejprve aktivujte některé přednastavení SLA tiskárny." +msgid "The slicer detected system SSL certificate store in: %1%" +msgstr "Průřez zjistil systémové úložiště certifikátů SSL v: %1%" + msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "Sklon bočnic vzhledem k podložce. 90 stupňů znamená kolmé stěny." +msgid "" +"The speed for loading of a filament into extruder after retraction (this " +"only applies to the extruder motor). If left as zero, the retraction speed " +"is used." +msgstr "" +"Rychlost pro zavádění vlákna do extrudéru po zatažení (toto platí pouze pro motor " +"extrudéru). Pokud je ponecháno na nule, použije se rychlost zatahování." + +msgid "The speed for retractions (this only applies to the extruder motor)." +msgstr "Rychlost pro zasouvání (toto platí pouze pro motor extrudéru)." + msgid "" "The Spiral Vase option can only be used when printing single material " "objects." -msgstr "" -"Možnost \"Spirálová váza\" lze použít pouze při tisku jedním materiálem." +msgstr "Možnost \"Spirálová váza\" lze použít pouze při tisku jedním materiálem." msgid "The supplied name is empty. It can't be saved." msgstr "Název je prázdný. Nelze uložit." @@ -8116,6 +11597,17 @@ msgstr "" "Verikální vzdálenost mezi objektem a raftem. Ignorováno pro rozpustné " "podpěry." +msgid "" +"The volume multiplier used to compute the final volume to extrude by the " +"algorithm." +msgstr "" +"Násobitel objemu používaný k výpočtu konečného objemu, který má algoritmus vytlačit." + +msgid "" +"The volume of melted plastic inside your nozzle. Used by 'advanced wiping'." +msgstr "" +"Objem roztaveného plastu uvnitř vaší trysky. Používá se 'pokročilým stíráním'." + msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" @@ -8127,8 +11619,7 @@ msgstr "" msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." -msgstr "" -"Čistíví Věž v současné době nepodporuje volumetric E (use_volumetric_e = 0)." +msgstr "Čistící Věž v současné době nepodporuje objemové E (use_volumetric_e = 0)." msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " @@ -8137,9 +11628,9 @@ msgid "" "set to 0)." msgstr "" "Čistící věž v současné době podporuje pouze nerozpustné podpěry\n" -"pokud jsou vytištěny s aktuálním extrudérem bez spuštění výměny nástroje.\n" -"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je " -"třeba nastavit na 0)." +"pokud jsou vytištěny s aktuálním extruderem bez spuštění výměny nástroje.\n" +"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je třeba " +"nastavit na 0)." msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" @@ -8149,15 +11640,21 @@ msgid "" "to be set to 0)." msgstr "" "Čistící věž v současné době podporuje pouze nerozpustné podpěry\n" -"pokud jsou vytištěny s aktuálním extrudérem bez spuštění výměny nástroje.\n" -"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je " -"třeba nastavit na 0)." +"pokud jsou vytištěny s aktuálním extruderem bez spuštění výměny nástroje.\n" +"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je třeba " +"nastavit na 0)." msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." +msgstr "Čistící věž není momentálně podporována pro multimateriálové sekvenční tisky." + +msgid "" +"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " +"and Repetier G-code flavors." msgstr "" -"Čistící věž není momentálně podporována pro multimateriálové sekvenční tisky." +"Čistící věz je v současné době podporován pouze pro varianty Marlin, RepRap/Sprinter " +"a Repetier G-code." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -8170,29 +11667,29 @@ msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" -"Čistící věž pro více objektů je možná pouze v případě, že objekty mají " -"stejný počet raft vrstev" +"Čistící věž pro více objektů je možná pouze v případě, že objekty mají stejný počet " +"raft vrstev" msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" -"Čistící věž pro více objektů je možná pouze v případě, že objekty mají " -"shodný parametr support_material_contact_distance" +"Čistící věž pro více objektů je možná pouze v případě, že objekty mají shodný " +"parametr support_material_contact_distance" msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" -"Čistící věž je při více objektech možná pouze v případě, že objekty jsou " -"slicovány stejně." +"Čistící věž je při více objektech možná pouze v případě, že objekty jsou slicovány " +"stejně." msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" -"Čistící věž je při více objektech možná pouze v případě, že objekty mají " -"všechny vrstvy stejné výšky" +"Čistící věž je při více objektech možná pouze v případě, že objekty mají všechny " +"vrstvy stejné výšky" msgid "" "The wipe tower is only supported if all extruders have the same nozzle " @@ -8215,8 +11712,8 @@ msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" -"Nacházejí se zde netisknutelné objekty. Zkuste upravit nastavení podpěr tak, " -"aby bylo možné objekty vytisknout." +"Nacházejí se zde netisknutelné objekty. Zkuste upravit nastavení podpěr tak, aby " +"bylo možné objekty vytisknout." msgid "" "There is a color change for extruder that has not been used before.\n" @@ -8230,8 +11727,7 @@ msgid "" "print job.\n" "This code won't be processed during G-code generation." msgstr "" -"Dochází zde ke změně barvy u extruderu, který již do konce tisku nebude " -"použit.\n" +"Dochází zde ke změně barvy u extruderu, který již do konce tisku nebude použit.\n" "Tento kód nebude během generování G-kódu zpracován." msgid "" @@ -8244,6 +11740,39 @@ msgstr "" msgid "There is an object with no extrusions in the first layer." msgstr "Je zde objekt, který nemá v první vrstvě žádné extrudování." +msgid "" +"These parameters allow the slicer to smooth the angles in each layer. The " +"precision will be at least the new precision of the curve. Set to 0 to " +"deactivate.\n" +"Note: as it uses the polygon's edges and only works in the 2D planes, you " +"must have a very clean or hand-made 3D model.\n" +"It's really only useful to smoothen functional models or very wide angles." +msgstr "" +"Tyto parametry umožňují sliceru vyhladit úhly v každé vrstvě. Přesnost bude " +"přinejmenším nová přesnost křivky. Deaktivujete nastavením na 0.\"\n" +"Poznámka: protože používá hrany polygonu a funguje pouze ve 2D rovinách, musíte mít " +"velmi čistý nebo ručně vyrobený 3D model.\"\n" +"Je to opravdu užitečné pouze pro vyhlazení funkčních modelů nebo velmi širokých " +"úhlů." + +msgid "Thin wall" +msgstr "Tenké stěny" + +msgid "Thin wall merge" +msgstr "Sloučení tenkých stěn" + +msgid "Thin wall overlap" +msgstr "Překrytí tenké stěny" + +msgid "Thin walls" +msgstr "Tenké stěny" + +msgid "Thin walls min width" +msgstr "Tenké stěny min šířka" + +msgid "Thin walls speed" +msgstr "Rychlost tenkých stěn" + msgid "This %s version: %s" msgstr "Tento %s verze: %s" @@ -8257,24 +11786,111 @@ msgstr "" msgid "This action will cause deletion of all ticks on vertical slider." msgstr "Tato akce způsobí odstranění všech značek na vertikálním posuvníku." +msgid "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 S" +"{first_layer_temperature}\" command wherever you want." +msgstr "" +"Tento kód je vložen mezi objekty při použití sekvenčního tisku. Ve výchozím " +"nastavení se teplota extrudéru a lože resetuje pomocí příkazu bez čekání; pokud " +"jsou však v tomto uživatelském kódu detekovány M104, M109, M140 nebo M190, Slic3r " +"nepřidá příkazy teploty. Poznámka že můžete použít zástupné proměnné pro všechna " +"nastavení Slic3r, takže můžete zadat příkaz \"M109 S{first_layer_temperature}\" " +"kamkoli budete chtít." + +msgid "" +"This custom code is inserted at every extrusion type change.Note that you " +"can use placeholder variables for all Slic3r settings as well as " +"{last_extrusion_role}, {extrusion_role}, {layer_num} and {layer_z}. The " +"'extrusion_role' strings can take these string values: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " +"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " +"SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the " +"role of the extrusion is not unique, not exactly inside another category or " +"not known." +msgstr "" +"Tento vlastní kód se vkládá při každé změně typu vysunutí. Všimněte si, že můžete " +"použít zástupné proměnné pro všechna nastavení Slic3r a také pro " +"{last_extrusion_role}, {extrusion_role}, {layer_num} a {layer_z}. Řetězce " +"'extrusion_role' mohou převzít tyto hodnoty řetězce: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, " +"BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, " +"Mixed }. Mixed se používá pouze v případě, že role vysunutí není jedinečná, není " +"přesně v jiné kategorii nebo neznámý." + +msgid "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as {layer_num} and " +"{layer_z}." +msgstr "" +"Tento vlastní kód se vkládá při každé změně vrstvy, hned po pohybu Z a předtím, než " +"se extruder přesune do bodu první vrstvy. Všimněte si, že můžete použít zástupné " +"proměnné pro všechna nastavení Slic3r a také {layer_num} a {layer_z}." + +msgid "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as {layer_num} and {layer_z}." +msgstr "" +"Tento vlastní kód je vložen při každé změně vrstvy, těsně před pohybem Z. Všimněte " +"si, že můžete použít zástupné proměnné pro všechna nastavení Slic3r a také " +"{layer_num} a {layer_z}." + +msgid "" +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode (and before any toolchange from this filament in case of " +"multimaterial printers). Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." +msgstr "" +"Tato end procedura je vložena na konec výstupního souboru, před gcode konce " +"tiskárny (a před jakoukoli výměnou nástroje z tohoto vlákna v případě " +"multimateriálových tiskáren). Pamatujte, že můžete použít zástupné proměnné pro " +"všechna nastavení Slic3r. Pokud máte více extruderů, je gcode zpracován v pořadí " +"extruderů." + +msgid "" +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." +msgstr "" +"Tato end procedura je vložena na konec výstupního souboru. Všimněte si, že můžete " +"použít zástupné proměnné pro všechna nastavení Slic3r." + msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" -"Toto experimentální nastavení se používá k omezení rychlosti změny " -"objemového průtoku. Hodnota 1,8mm³/s² zajišťuje, že změna objemového průtoku " -"z 1,8 mm³/s (šířka extruze 0,45 mm, výška extruze 0,2 mm, rychlost posuvu 20 " -"mm/s) na 5,4 mm³/s (rychlost posuvu 60 mm/s) potrvá nejméně 2 sekundy." +"Toto experimentální nastavení se používá k omezení rychlosti změny objemového " +"průtoku. Hodnota 1,8mm³/s² zajišťuje, že změna objemového průtoku z 1,8 mm³/s " +"(šířka extruze 0,45 mm, výška extruze 0,2 mm, rychlost posuvu 20 mm/s) na 5,4 mm³/s " +"(rychlost posuvu 60 mm/s) potrvá nejméně 2 sekundy." msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" -"Toto experimentální nastavení používá příkazy G10 a G11, aby si firmware " -"poradil s retrakcí. Toto je podporováno pouze v posledních verzích firmwaru " -"Marlin." +"Toto experimentální nastavení používá příkazy G10 a G11, aby si firmware poradil s " +"retrakcí. Toto je podporováno pouze v posledních verzích firmwaru Marlin." + +msgid "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." +msgstr "" +"Toto experimentální nastavení používá na výstupu hodnoty E v kubických milimetrech " +"místo v lineárních milimetrech. Pokud váš firmware ještě nezná průměr(y) vlákna, " +"můžete do svého počátečního G-kódu vložit příkazy jako 'M200 D{filament_diameter_0} " +"T0' za účelem zapnutí objemového režimu a použití průměru vlákna přiřazeného k " +"vláknu vybranému v Slic3r. Toto je podporováno pouze v nejnovější verzi Marlin." msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " @@ -8282,10 +11898,82 @@ msgid "" "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" -"Tento faktor mění poměrné množství průtoku. Možná bude třeba toto nastavení " -"vyladit pro dosažení hezkého povrchu a správné šířky jednotlivých stěn. " -"Obvyklé hodnoty jsou mezi 0,9 a 1,1. Pokud si myslíte, že hodnotu " -"potřebujete změnit více, zkontrolujte průměr filamentu a E kroky ve firmwaru." +"Tento faktor mění poměrné množství průtoku. Možná bude třeba toto nastavení vyladit " +"pro dosažení hezkého povrchu a správné šířky jednotlivých stěn. Obvyklé hodnoty " +"jsou mezi 0,9 a 1,1. Pokud si myslíte, že hodnotu potřebujete změnit více, " +"zkontrolujte průměr filamentu a E kroky ve firmwaru." + +msgid "" +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 90% and 110%. If you think you need to change this " +"more, check filament diameter and your firmware E steps. This print setting " +"is multiplied against the extrusion_multiplier from the filament tab. Its " +"only purpose is to offer the same functionality but on a per-object basis." +msgstr "" +"Tento faktor proporcionálně mění množství průtoku. Možná budete muset toto " +"nastavení vyladit, abyste získali pěknou povrchovou úpravu a správné šířky " +"jednotlivých stěn. Obvyklé hodnoty jsou mezi 90 % a 110 %. Pokud si myslíte, že je " +"potřeba toto změnit více, zkontrolujte vlákno průměr a vaše kroky firmwaru E. Toto " +"nastavení tisku se vynásobí proti extrusion_multiplier na kartě filament. Jeho " +"jediným účelem je nabídnout stejnou funkcionalitu, ale na základě jednotlivých " +"objektů." + +msgid "" +"This fan speed is enforced during all infill bridges. It won't slow down the " +"fan if it's currently running at a higher speed.\n" +"Set to 1 to follow default speed.\n" +"Set to -1 to disable this override (internal bridges will use Bridges fan " +"speed).\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Tato rychlost ventilátoru je vynucena během všech výplňových mostů. Nezpomalí " +"ventilátor, pokud aktuálně běží na vyšší rychlost.\n" +"Nastavte na 1, abyste dodrželi výchozí rychlost.\n" +"Nastavením na -1 toto přepsání deaktivujete (interní mosty budou používat rychlost " +"ventilátoru mostů).\n" +"Lze přepsat pouze pomocí disable_fan_first_layers." + +msgid "" +"This fan speed is enforced during all top fills.\n" +"Set to 1 to disable the fan.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Tato rychlost ventilátoru je vynucena při všech horních plněních.\n" +"Nastavením na 1 deaktivujete ventilátor.\n" +"Pokud chcete toto přepsání deaktivovat, nastavte na -1.\n" +"Lze přepsat pouze pomocí disable_fan_first_layers." + +msgid "" +"This fan speed is enforced during bridges and overhangs. It won't slow down " +"the fan if it's currently running at a higher speed.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Tato rychlost ventilátoru je vynucena během mostů a převisů. Nezpomalí ventilátor, " +"pokud aktuálně běží na vyšší rychlost.\n" +"Pokud chcete toto přepsání deaktivovat, nastavte na -1.\n" +"Lze přepsat pouze pomocí disable_fan_first_layers." + +msgid "" +"This feature allows you to combine infill and speed up your print by " +"extruding thicker infill layers while preserving thin perimeters, thus " +"accuracy." +msgstr "" +"Tato funkce umožňuje kombinovat výplně a urychlit tisk vytlačením silnějších " +"výplňových vrstev při zachování tenkých perimetrů, tedy přesnosti." + +msgid "" +"This feature allows you to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." +msgstr "" +"Tato funkce vám umožňuje vynutit vytvoření pevné vrstvy pro každý daný počet " +"vrstev. Nula pro deaktivaci. Tuto hodnotu můžete nastavit na libovolnou hodnotu " +"(například 9999); Slic3r automaticky vybere maximální možný počet vrstev ke spojení " +"podle průměru trysky a výška vrstvy." msgid "" "This feature will raise Z gradually while printing a single-walled object in " @@ -8294,19 +11982,18 @@ msgid "" "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" -"Tato funkce zvýší postupně Z při tisku jednovrstvého objektu, aby se " -"odstranil jakýkoli viditelný šev. Tato volba vyžaduje jediný obvod, žádnou " -"výplň, žádné vrchní plné vrstvy a žádný podpůrný materiál. Můžete stále " -"nastavit libovolný počet spodních plných vrstev, stejně jako obrysové " -"smyčky / límec. Při tisku více než jednoho samostatného objektu nebude toto " -"nastavení fungovat." +"Tato funkce zvýší postupně Z při tisku jednovrstvého objektu, aby se odstranil " +"jakýkoli viditelný šev. Tato volba vyžaduje jediný perimetr, žádnou výplň, žádné " +"vrchní plné vrstvy a žádný podpůrný materiál. Můžete stále nastavit libovolný počet " +"spodních plných vrstev, stejně jako obrysové smyčky / límec. Při tisku více než " +"jednoho samostatného objektu nebude toto nastavení fungovat." msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" -"Tento soubor nelze načíst v jednoduchém režimu. Chcete přepnout do " -"pokročilého režimu?" +"Tento soubor nelze načíst v jednoduchém režimu. Chcete přepnout do pokročilého " +"režimu?" msgid "" "This file contains several objects positioned at multiple heights.\n" @@ -8336,8 +12023,23 @@ msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" -"Zapne výpočet automatického chlazení, který upravuje rychlost tisku a " -"ventilátoru v závislosti na délce tisku jedné vrstvy." +"Zapne výpočet automatického chlazení, který upravuje rychlost tisku a ventilátoru v " +"závislosti na délce tisku jedné vrstvy." + +msgid "This flag enforces a retraction whenever a Z move is done (before it)." +msgstr "Tento příznak vynucuje stažení vždy, když je proveden pohyb Z (před ním)." + +msgid "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders.\n" +"Note that as a wipe only happens when there is a retraction, the 'only " +"retract when crossing perimeters' print setting can greatly reduce the " +"number of wipes." +msgstr "" +"Tento příznak přesune trysku při zatahování, aby se minimalizovala možná skvrna na " +"netěsných extrudérech.\n" +"Všimněte si, že utírání se děje pouze při zatažení, nastavení tisku 'pouze při " +"překročení perimetru' může výrazně snížit počet stírání." msgid "This G-code will be used as a code for the color change" msgstr "Tento G-code bude použit jako kód pro změnu barvy" @@ -8348,6 +12050,15 @@ msgstr "Tento G-code bude použit jako kód pro pozastavení tisku" msgid "This G-code will be used as a custom code" msgstr "Tento G-code bude použit jako vlastní kód" +msgid "" +"This increases the size of the object by a certain amount to have enough " +"plastic to mill. You can set a number of mm or a percentage of the " +"calculated optimal extra width (from flow calculation)." +msgstr "" +"Tím se zvětší velikost objektu o určité množství, aby bylo dost plastu na " +"frézování. Můžete nastavit počet mm nebo procento vypočítané optimální extra šířky " +"(z výpočtu průtoku)." + msgid "This is a default preset." msgstr "Toto je výchozí přednastavení." @@ -8358,19 +12069,106 @@ msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" -"Jedná se o multimateriálovou tiskárnu s jedním extruderem, průměry všech " -"extruderů se nastaví na novou hodnotu. Chcete pokračovat?" +"Jedná se o multimateriálovou tiskárnu s jedním extruderem, průměry všech extruderů " +"se nastaví na novou hodnotu. Chcete pokračovat?" msgid "This is a system preset." msgstr "Toto je systémové přednastavení." +msgid "This is only used in Slic3r interface as a visual help." +msgstr "Toto je v Slic3ru jako názorná pomoc." + msgid "This is only used in the Slic3r interface as a visual help." msgstr "Toto je v Slic3ru jako názorná pomoc." +msgid "This is the color that will be enforced on objects in the thumbnails." +msgstr "Toto je barva, která bude vynucena na objektech v miniaturách." + +msgid "" +"This is the DEFAULT extrusion spacing. It's convert to a width and this " +"width can be used to REPLACE 0-width fields. It's useless when all width " +"fields have a value.Like Default extrusion width but spacing is the distance " +"between two lines (as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Toto je VÝCHOZÍ rozestup vysunutí. Převádí se na šířku a tuto šířku lze použít k " +"NAHRAZENÍ polí o šířce 0. Je to zbytečné, když všechna pole šířky mají hodnotu. " +"Stejně jako výchozí šířka vysunutí, ale mezera je vzdálenost mezi dvěma řádky (jako " +"trochu se překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "This is the diameter of your cutting tool." +msgstr "Toto je průměr vašeho řezného nástroje." + msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "Průměr trysky extruderu (například: 0.5, 0.35 atd.)" +msgid "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. \n" +"Can be a % of the nozzle diameter.\n" +"If set to 0, layer height is limited to 75% of the nozzle diameter." +msgstr "" +"Toto je nejvyšší tisknutelná výška vrstvy pro tento extrudér, která se používá k " +"omezení proměnlivé výšky vrstvy a výšky nosné vrstvy. Maximální doporučená výška " +"vrstvy je 75 % šířky vytlačování, aby se dosáhlo rozumné přilnavosti mezi " +"vrstvami. \n" +"Může být % z průměru trysky.\n" +"Pokud je nastaveno na 0, výška vrstvy je omezena na 75 % průměru trysky." + +msgid "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm.\n" +"Can be a % of the nozzle diameter." +msgstr "" +"Toto je nejnižší výška tisknutelné vrstvy pro tento extrudér a omezuje rozlišení " +"pro proměnnou výšku vrstvy. Typické hodnoty jsou mezi 0,05 mm a 0,1 mm.\n" +"Může být % z průměru trysky." + +msgid "" +"This is the percentage of the flow that is used for the second ironing pass. " +"Typical 10-20%. Should not be higher than 20%, unless you have your top " +"extrusion width greatly superior to your nozzle width. A value too low and " +"your extruder will eat the filament. A value too high and the first pass " +"won't print well." +msgstr "" +"Toto je procento toku použitého pro druhý ironing průchod. Obvykle 10–20 %. Nemělo " +"by být vyšší než 20 %, pokud nemáte šířku horního vytlačování výrazně větší než " +"šířku trysky. Příliš nízká hodnota váš extrudér sežere vlákno. Příliš vysoká " +"hodnota a první průchod nebude dobře tisknout." + +msgid "" +"This is the rounding error of the input object. It's used to align points " +"that should be in the same line.\n" +"Set zero to disable." +msgstr "" +"Toto je chyba zaokrouhlení vstupního objektu. Používá se k zarovnání bodů, které by " +"měly být na stejném řádku.\n" +"Nastavit nulu pro zakázání." + +msgid "" +"This is the width of the ironing pass, in a % of the top infill extrusion " +"width, should not be more than 50% (two times more lines, 50% overlap). It's " +"not necessary to go below 25% (four times more lines, 75% overlap). \n" +"If you have problems with your ironing process, don't forget to look at the " +"flow->above bridge flow, as this setting should be set to min 110% to let " +"you have enough plastic in the top layer. A value too low will make your " +"extruder eat the filament." +msgstr "" +"Toto je šířka ironing průchodu, v % šířky extruze horní výplně, by neměla být " +"větší než 50 % (dvakrát více čar, 50 % překrytí). Není nutné jít pod 25 % " +"(čtyřikrát více řádky, 75% překrytí). \n" +"Pokud máte problémy s procesem ironing, nezapomeňte se podívat na průtok -> nad " +"průtokem můstku, protože toto nastavení by mělo být nastaveno na min. 110 %, abyste " +"měli dostatek plastu v horní vrstvě. Příliš nízká hodnota přiměje váš extrudér " +"sežrat vlákno." + msgid "This is wipe tower layer" msgstr "Toto je vrstva čistící věže" @@ -8378,13 +12176,33 @@ msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools. " msgstr "" -"Tato matice popisuje objemy (v kubických milimetrech) nutné k vyčištění " -"nového filamentu na čistící věži pro danou dvojici nástrojů. " +"Tato matice popisuje objemy (v kubických milimetrech) nutné k vyčištění nového " +"filamentu na čistící věži pro danou dvojici nástrojů. " msgid "" "This may cause problems in g-code visualization and printing time estimation." msgstr "Může to způsobit problémy při vizualizaci g-codu a odhadu doby tisku." +msgid "" +"This offset wil be added to all fan values set in the filament properties. " +"It won't make them go higher than 100% nor lower than 0%." +msgstr "" +"Toto posunutí bude přidáno ke všem hodnotám ventilátoru nastaveným ve vlastnostech " +"vlákna. Nedonutí je jít výše než 100 % ani nižší než 0 %." + +msgid "" +"This offset will be added to all extruder temperatures set in the filament " +"settings.\n" +"Note that you should set 'M104 S{first_layer_temperature{initial_extruder} + " +"extruder_temperature_offset{initial_extruder}}'\n" +"instead of 'M104 S{first_layer_temperature}' in the start_gcode" +msgstr "" +"Tento posun bude přidán ke všem teplotám extruderu nastaveným v nastavení vlákna.\n" +"Všimněte si, že byste měli nastavit 'M104 " +"S{first_layer_temperature{initial_extruder} + " +"extruder_temperature_offset{initial_extruder}}'\n" +"místo 'M104 S{first_layer_temperature}' v start_gcode" + msgid "" "This operation is irreversible.\n" "Do you want to proceed?" @@ -8398,27 +12216,120 @@ msgid "" "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" -"Tato volba nastavuje počet perimetrů, které je třeba vygenerovat pro každou " -"vrstvu. Slic3r může toto číslo automaticky zvýšit, pokud detekuje šikmé " -"plochy, které se tisknou lépe s vyšším počtem perimetrů, pokud je zapnuta " -"možnost Extra perimetry." +"Tato volba nastavuje počet perimetrů, které je třeba vygenerovat pro každou vrstvu. " +"Slic3r může toto číslo automaticky zvýšit, pokud detekuje šikmé plochy, které se " +"tisknou lépe s vyšším počtem perimetrů, pokud je zapnuta možnost Extra perimetry." msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" -"Tato volba sníží teplotu neaktivních extruderů, aby u nich nedošlo k " -"vytékání." +"Tato volba sníží teplotu neaktivních extruderů, aby u nich nedošlo k vytékání." + +msgid "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, this slows " +"down the G-code generation due to the multiple checks involved." +msgstr "" +"Tato možnost omezí výplň na oblasti skutečně potřebné pro podepření stropů (bude " +"fungovat jako vnitřní podpůrný materiál). Pokud je povolena, zpomaluje generování G-" +"kódu kvůli vícenásobným kontrolám." msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "Tato volba obrátí pořadí tisku perimetrů a výplní." +msgid "" +"This parameter grows the bridged solid infill layers by the specified mm to " +"anchor them into the sparse infill and over the perimeters below. Put 0 to " +"deactivate it. Can be a % of the width of the external perimeter." +msgstr "" +"Tento parametr zvětší přemostěné pevné výplňové vrstvy o zadaný mm, aby je ukotvil " +"do řídké výplně a přes perimetry pod ním. Zadáním 0 jej deaktivujete. Může to být % " +"z šířky vnějšího perimetru." + +msgid "" +"This parameter grows the top/bottom/solid layers by the specified mm to " +"anchor them into the sparse infill and support the perimeters above. Put 0 " +"to deactivate it. Can be a % of the width of the perimeters." +msgstr "" +"Tento parametr zvětší horní/spodní/plné vrstvy o zadaný mm, aby je ukotvil do řídké " +"výplně a podpořil perimetry nad nimi. Zadáním 0 jej deaktivujete. Může to být % z " +"šířky perimetrů." + msgid "This printer will be shown in the presets list as" msgstr "Tato tiskárna se v seznamu přednastavení zobrazí jako" +msgid "" +"This sets the end of the threshold for small perimeter length. Every " +"perimeter loop lower than this will see their speed reduced a bit, from " +"their normal speed at this length down to small perimeter speed.\n" +"Can be a mm or a % of the nozzle diameter." +msgstr "" +"Tím se nastavuje konec prahu pro malou délku perimetru . U každé obvodové smyčky " +"nižší než tato se jejich rychlost o něco sníží, z normální rychlosti na této délce " +"na malou rychlost perimetru .\n" +"Může být mm nebo % z průměru trysky." + +msgid "" +"This sets the threshold for small perimeter length. Every loop with a length " +"lower than this will be printed at small perimeter speed\n" +"Can be a mm value or a % of the nozzle diameter." +msgstr "" +"Toto nastavuje práh pro malou délku perimetru . Každá smyčka s délkou menší než " +"tato bude vytištěna malou rychlostí perimetru \n" +"Může to být hodnota mm nebo % z průměru trysky." + +msgid "" +"This setting allows you to modify the time estimation by a % amount. As " +"Slic3r only uses the Marlin algorithm, it's not precise enough if another " +"firmware is used." +msgstr "" +"Toto nastavení vám umožňuje upravit odhad času o procentuální hodnotu. Protože " +"Slic3r používá pouze Marlin algoritmus, není dostatečně přesný, pokud je použit " +"jiný firmware." + +msgid "" +"This setting allows you to reduce the overlap between the perimeters, to " +"reduce the impact of the perimeters' artifacts. 100% means that no gap is " +"left, and 0% means that perimeters are not touching each other anymore.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Toto nastavení umožňuje snížit překrytí mezi perimetry a snížit dopad artefaktů " +"perimetrů. 100 % znamená, že nezůstala žádná mezera, a 0 % znamená, že se perimetry " +"již vzájemně nedotýkají.\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být " +"odstraněn, pokud pro něj není použití." + +msgid "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width.\n" +"Don't put a value higher than 50% (of the perimeter width), as it will fuse " +"with it and follow the perimeter." +msgstr "" +"Toto nastavení aplikuje další překrytí mezi výplní a perimetry pro lepší spojení. " +"Teoreticky by to nemělo být potřeba, ale vůle může způsobit mezery. Pokud je " +"vyjádřena v procentech (příklad: 15%), počítá se přes perimetrovou šířku vysunutí.\n" +"Nezadávejte hodnotu vyšší než 50 % (šířky perimetru), protože se s ní spojí a bude " +"sledovat perimetr." + +msgid "" +"This setting control by how much the speed can be reduced to increase the " +"layer time. It's a maximum reduction, so a lower value makes the minimum " +"speed higher. Set to 90% if you don't want the speed to go below 10% of the " +"current speed.\n" +"Set zero to disable" +msgstr "" +"Toto nastavení řídí, o kolik lze snížit rychlost, aby se prodloužila doba vrstvy. " +"Jde o maximální snížení, takže nižší hodnota zvyšuje minimální rychlost. Nastavte " +"na 90 %, pokud nechcete, aby rychlost klesla pod 10 % aktuální rychlosti.\n" +"Pro deaktivaci nastavte nulu" + msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." @@ -8427,11 +12338,151 @@ msgstr "" "poskytuje lepší přesnost, ale tiskne se déle." msgid "" -"This string is edited by RammingDialog and contains ramming specific " -"parameters." +"This setting controls the height of last object layers to put the last layer " +"at the exact highest height possible. Experimental." msgstr "" +"Toto nastavení řídí výšku posledních vrstev objektů, aby byla poslední vrstva " +"přesně v nejvyšší možné výšce. Experimentální." + +msgid "" +"This setting is used to set the maximum speed when extruding inside the wipe " +"tower (use M220). In %, set 0 to disable and use the Filament type instead.\n" +"If disabled, these filament types will have a defaut value of:\n" +" - PVA: 80% to 60%\n" +" - SCAFF: 35%\n" +" - FLEX: 35%\n" +" - OTHERS: 100%\n" +"Note that the wipe tower reset the speed at 100% for the unretract in any " +"case.\n" +"If using marlin, M220 B/R is used to save the speed override before the wipe " +"tower print." +msgstr "" +"Toto nastavení se používá k nastavení maximální rychlosti při vytlačování uvnitř " +"stírací věže (použijte M220). V %, nastavte 0 pro deaktivaci a místo toho použijte " +"typ vlákna.\n" +"Pokud je zakázáno, tyto typy vláken budou mít výchozí hodnotu:\n" +" - PVA: 80 % až 60 %\n" +" - SCAFF: 35 %\n" +" - FLEX: 35 %\n" +" - OSTATNÍ: 100 %\n" +"Všimněte si, že stírací věž v každém případě resetovala rychlost na 100% pro " +"odtažení.\n" +"Pokud používáte marlin, M220 B/R se používá k uložení přepsání rychlosti před " +"tiskem stírací věže." + +msgid "" +"This setting may slightly degrade the quality of your external perimeter, in " +"exchange for a better bonding between perimeters.Use it if you have great " +"difficulties with perimeter bonding, for example with high temperature " +"filaments.\n" +"This percentage is the % of overlap between perimeters, a bit like " +"perimeter_overlap and external_perimeter_overlap, but in reverse. You have " +"to set perimeter_overlap and external_perimeter_overlap to 100%, or this " +"setting has no effect. 0: no effect, 50%: half of the nozzle will be over an " +"already extruded perimeter while extruding a new one, unless it's an " +"external one).\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Toto nastavení může mírně zhoršit kvalitu vašeho vnějšího perimetru výměnou za " +"lepší spojení mezi perimetry. Použijte jej, pokud máte velké potíže s lepením po " +"perimetru, například s vysokoteplotními vlákny.\n" +"Toto procento je % překrytí mezi perimetry, trochu jako perimeter_overlap a " +"external_perimeter_overlap, ale obráceně. Musíte nastavit perimeter_overlap a " +"external_perimeter_overlap na 100 %, jinak toto nastavení nemá žádný vliv. 0: žádný " +"účinek, 50 %: polovina tryska bude při vytlačování nové přes již vytlačený " +"perimetr, pokud se nejedná o externí).\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být " +"odstraněno, pokud pro to není k ničemu." + +msgid "" +"This setting represents the base fan speed this filament needs, or at least " +"the minimum PWM your fan needs to work." +msgstr "" +"Toto nastavení představuje základní rychlost ventilátoru, kterou toto vlákno " +"potřebuje, nebo alespoň minimální PWM, kterou váš ventilátor potřebuje k provozu." + +msgid "" +"This setting represents the maximum speed of your fan, used when the layer " +"print time is Very short." +msgstr "" +"Toto nastavení představuje maximální rychlost vašeho ventilátoru, která se používá, " +"když je doba tisku vrstvy velmi krátká." + +msgid "" +"This setting represents the minimum mm² for a gapfill extrusion to be " +"created.\n" +"Can be a % of (perimeter width)²" +msgstr "" +"Toto nastavení představuje minimální mm² pro vytvoření vytlačování s výplní mezer.\n" +"Může být % z (šířky perimetru)²" + +msgid "" +"This setting restricts the post-process milling to a certain height, to " +"avoid milling the bed. It can be a mm or a % of the first layer height (so " +"it can depend on the object)." +msgstr "" +"Toto nastavení omezuje následné frézování na určitou výšku, aby se zabránilo " +"frézování lože. Může to být mm nebo % výšky první vrstvy (může tedy záviset na " +"objektu)." + +msgid "" +"This setting will ensure that all 'overlap' are not higher than this value. " +"This is useful for filaments that are too viscous, as the line can't flow " +"under the previous one." +msgstr "" +"Toto nastavení zajistí, že všechny 'překryvy' nebudou vyšší než tato hodnota. To je " +"užitečné pro vlákna, která jsou příliš viskózní, protože šňůra nemůže podlévat " +"předchozí." + +msgid "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode (and after any toolchange to this filament in case of multi-material " +"printers). This is used to override settings for a specific filament. If " +"Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " +"will not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 S" +"{first_layer_temperature}\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." +msgstr "" +"Tato procedura spouštění se vkládá na začátek, po každém gkódu spuštění tiskárny (a " +"po jakékoli změně nástroje na toto vlákno v případě tiskáren s více materiály). " +"Používá se k přepsání nastavení pro konkrétní vlákno. Pokud Slic3r detekuje M104, " +"M109, M140 nebo M190 ve vašich vlastních kódech, takové příkazy nebudou automaticky " +"přidávány před, takže si můžete sami přizpůsobit pořadí příkazů vytápění a dalších " +"vlastních akcí. Všimněte si, že pro všechna nastavení Slic3r můžete použít zástupné " +"proměnné, takže můžete zadat Příkaz \"M109 S{first_layer_temperature}\" kdekoli " +"chcete. Pokud máte více extruderů, gcode se zpracovává v pořadí extruderů." + +msgid "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder has just started heating, but before " +"extruder has finished heating. If Slic3r detects M104 or M190 in your custom " +"codes, such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S{first_layer_temperature}\" command wherever you want.\n" +" placeholders: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, bounding_box" +"[minx,miny,maxx,maxy]" +msgstr "" +"Tato procedura spouštění je vložena na začátku poté, co lože dosáhlo cílové teploty " +"a extrudér právě začal zahřívat, ale předtím, než extrudér dokončil ohřev. Pokud " +"Slic3r detekuje M104 nebo M190 ve vašich vlastních kódech, takové příkazy nebudou " +"automaticky přidány, takže můžete si upravit pořadí příkazů ohřevu a dalších " +"vlastních akcí. Všimněte si, že pro všechna nastavení Slic3r můžete použít zástupné " +"proměnné, takže příkaz \"M109 S{first_layer_temperature}\" můžete zadat kamkoli " +"chcete.\n" +" zástupné symboly: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx," +"miny,maxx,maxy]" + +msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." +msgstr "" +"This string is edited by RammingDialog and contains ramming specific parameters." msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -8439,19 +12490,19 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" -"Tato hodnota bude přidána (nebo odečtena) ze všech souřadnic Z ve výstupním " -"G-code. Používá se ke kompenzování špatné pozice endstopu Z. Například pokud " -"endstop 0 skutečně ponechá trysku 0,3 mm daleko od tiskové podložky, " -"nastavte hodnotu -0,3 (nebo dolaďte svůj koncový doraz)." +"Tato hodnota bude přidána (nebo odečtena) ze všech souřadnic Z ve výstupním G-code. " +"Používá se ke kompenzování špatné pozice endstopu Z. Například pokud endstop 0 " +"skutečně ponechá trysku 0,3 mm daleko od tiskové podložky, nastavte hodnotu -0,3 " +"(nebo dolaďte svůj koncový doraz)." msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below. " msgstr "" -"Tento vektor ukládá potřebné objemy pro změnu z/na každý extruder používaný " -"na čistící věži. Tyto hodnoty jsou použity pro zjednodušení vytvoření " -"celkových objemů čištění níže. " +"Tento vektor ukládá potřebné objemy pro změnu z/na každý extruder používaný na " +"čistící věži. Tyto hodnoty jsou použity pro zjednodušení vytvoření celkových objemů " +"čištění níže. " msgid "" "This version of %s is not compatible with currently installed configuration " @@ -8463,23 +12514,22 @@ msgid "" "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" -"Tato verze %s není kompatibilní se současně nainstalovanými balíčky " -"nastavení.\n" +"Tato verze %s není kompatibilní se současně nainstalovanými balíčky nastavení.\n" "Tato situace nejspíše nastala spuštěním starší verze %s po používání novější " "verze.\n" "\n" -"Můžete buď ukončit %s a zkusit to znovu s novou verzí, nebo můžete znovu " -"spustit výchozí konfiguraci. Před instalací kompatibilního nastavení s touto " -"verzí %s dojde k vytvoření zálohy současné konfigurace." +"Můžete buď ukončit %s a zkusit to znovu s novou verzí, nebo můžete znovu spustit " +"výchozí konfiguraci. Před instalací kompatibilního nastavení s touto verzí %s dojde " +"k vytvoření zálohy současné konfigurace." msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" -"Aplikuje gamma korekci na rastrové 2D polygony. Hodnota nula znamená " -"nastavení prahové hodnoty doprostřed. Toto chování eliminuje antialiasing " -"bez ztráty otvorů v polygonech." +"Aplikuje gamma korekci na rastrové 2D polygony. Hodnota nula znamená nastavení " +"prahové hodnoty doprostřed. Toto chování eliminuje antialiasing bez ztráty otvorů v " +"polygonech." msgid "Threads" msgstr "Vlákna" @@ -8488,8 +12538,26 @@ msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" -"Vlákna jsou používána pro paralelizaci časově náročnějších úloh. Optimální " -"počet vláken je mírně nad počtem dostupných jader/procesorů." +"Vlákna jsou používána pro paralelizaci časově náročnějších úloh. Optimální počet " +"vláken je mírně nad počtem dostupných jader/procesorů." + +msgid "Threshold" +msgstr "Prahová hodnota" + +msgid "threshold for" +msgstr "Prahová hodnota pro" + +msgid "Thumbnail color" +msgstr "Barva miniatury" + +msgid "Thumbnail options" +msgstr "Možnosti miniatur" + +msgid "Thumbnails" +msgstr "Miniatury" + +msgid "Thumbnails size" +msgstr "Velikost náhledů" msgid "Tilt" msgstr "Náklon" @@ -8500,14 +12568,20 @@ msgstr "Doba náklonu" msgid "Time" msgstr "Čas" +msgid "time" +msgstr "Čas" + +msgid "Time estimation compensation" +msgstr "Kompenzace podle časového odhadu" + msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" -"Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí " -"nový filament během jeho výměny (při provádění kódu T). Tento čas je přidán " -"k celkové době tisku pomocí G-code odhadovače tiskového času." +"Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí nový " +"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k celkové " +"době tisku pomocí G-code odhadovače tiskového času." msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " @@ -8515,8 +12589,8 @@ msgid "" "added to the total print time by the G-code time estimator." msgstr "" "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) vysouvá " -"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k " -"celkové době tisku pomocí G-code odhadovače tiskového času." +"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k celkové " +"době tisku pomocí G-code odhadovače tiskového času." msgid "Time of the fast tilt" msgstr "Doba trvání rychlého náklonu" @@ -8529,16 +12603,30 @@ msgid "" "toolchanges with flexible materials that may need more time to shrink to " "original dimensions. " msgstr "" -"Doba čekání po vysunutí filamentu. Může pomoci ke spolehlivé změně extruderu " -"s flexibilními materiály, které potřebují více času ke smrštění na původní " -"rozměry. " +"Doba čekání po vysunutí filamentu. Může pomoci ke spolehlivé změně extruderu s " +"flexibilními materiály, které potřebují více času ke smrštění na původní rozměry. " msgid "to" -msgstr "do" +msgstr "na" + +msgid "" +"To avoid visible seam, the extrusion can be stoppped a bit before the end of " +"the loop.\n" +"Can be a mm or a % of the current extruder diameter." +msgstr "" +"Aby se zabránilo viditelnému švu, lze vytlačování zastavit chvíli před koncem " +"smyčky.\n" +"Může být mm nebo % z aktuálního průměru extrudéru." msgid "To do that please specify a new name for the preset." +msgstr "Chcete-li akci provést, prosím nejdříve zadejte nový název přednastavení." + +msgid "" +"To further reduce stringing, it can be helpful to set a lower temperature " +"just prior to extracting filament from the hotend." msgstr "" -"Chcete-li akci provést, prosím nejdříve zadejte nový název přednastavení." +"Pro další snížení navlékání může být užitečné nastavit nižší teplotu těsně před " +"vyjmutím vlákna z hotendu." msgid "" "To specify the system certificate store manually, please set the %1% " @@ -8551,8 +12639,8 @@ msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"Chcete-li použít vlastní soubor CA, importujte soubor CA do Certificate " -"Store / Keychain." +"Chcete-li použít vlastní soubor CA, importujte soubor CA do Certificate Store / " +"Keychain." msgid "Toggle %c axis mirroring" msgstr "Přepnout zrcadlení podle osy %c" @@ -8570,7 +12658,7 @@ msgid "Tool #" msgstr "Nástroj #" msgid "Tool change G-code" -msgstr "G-code pro výměnu nástroje" +msgstr "G-Code pro výměnu nástroje" msgid "Tool changes" msgstr "Výměny nástroje" @@ -8578,35 +12666,83 @@ msgstr "Výměny nástroje" msgid "Tool marker" msgstr "Vizualizace nástroje" +msgid "Tool name" +msgstr "Název nástroje" + +msgid "Tool offset" +msgstr "Odsazení nástroje" + msgid "Tool position" msgstr "Poloha nástroje" msgid "Tool type" msgstr "Typ nástroje" +msgid "Tool z lift" +msgstr "Tool z lift" + +msgid "Tool z offset" +msgstr "Odsazení nástroje z" + +msgid "Tool/C" +msgstr "Nástroj/C" + msgid "Toolchange parameters with single extruder MM printers" msgstr "Parametry při výměně (Multi Material s jedním extruderem)" +msgid "Toolchange part fan speed" +msgstr "Rychlost ventilátoru dílu pro výměnu nástrojů" + +msgid "Toolchange temperature" +msgstr "Teplota při výměně nástroje" + +msgid "Toolchange temperature enabled" +msgstr "Teplota výměny nástrojů povolena" + msgid "Top" -msgstr "Vrchních" +msgstr "Vrchní" msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" -"Nápověda pro tloušťku vrchní / spodní skořepiny: Není k dipozici z důvodu " -"neplatné výšky vrstvy." +"Nápověda pro tloušťku vrchní / spodní skořepiny: Není k dipozici z důvodu neplatné " +"výšky vrstvy." + +msgid "Top fan speed" +msgstr "Nejvyšší rychlost ventilátoru" + +msgid "Top fill" +msgstr "Vrchní výplň" + +msgid "Top fill flow ratio" +msgstr "Poměr průtoku vrchní výplně" + +msgid "Top flow calibration" +msgstr "Kalibrace horního průtoku" + +msgid "top infill" +msgstr "Vrchní výplň" msgid "Top interface layers" msgstr "Vrchní kontaktní vrstvy" msgid "Top is open." -msgstr "Horní část je otevřená." +msgstr "Vrchní část je otevřená." + +msgid "Top layers" +msgstr "Vrchní vrstvy" msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "Tloušťka vrchní skořepiny je %1% mm při výšce vrstvy %2% mm." +msgid "Top solid " +msgstr "Vrchní plná " + +msgid "Top solid" +msgstr "Vrchní plná" + msgid "Top solid infill" -msgstr "Vrchní plné výplně" +msgstr "Vrchní plná výplň" msgid "top solid infill" msgstr "vrchní plná výplň" @@ -8614,6 +12750,12 @@ msgstr "vrchní plná výplň" msgid "Top solid layers" msgstr "Vrchních plných vrstev" +msgid "Top solid spacing" +msgstr "Vrchní pevná mezera" + +msgid "Top solid speed" +msgstr "Nejvyšší plná rychlost" + msgid "Top View" msgstr "Pohled svrchu" @@ -8627,8 +12769,8 @@ msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" -"Celkový objem čištění je spočítán jako součet dvou hodnot níže v závislosti " -"na tom, které extrudery jsou zavedeny/vyjmuty." +"Celkový objem čištění je spočítán jako součet dvou hodnot níže v závislosti na tom, " +"které extrudery jsou zavedeny/vyjmuty." msgid "Total rammed volume" msgstr "Celkový objem rapidní extruze" @@ -8654,6 +12796,15 @@ msgstr "Translace" msgid "Travel" msgstr "Rychloposun" +msgid "Travel acceleration" +msgstr "Cestovní zrychlení" + +msgid "Travel cost" +msgstr "Cena cesty" + +msgid "Travel speed" +msgstr "Rychloposun" + msgid "Triangles" msgstr "Trojúhelníky" @@ -8661,8 +12812,14 @@ msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" -"Pokuste se opravit nemanifoldní meshe (tato možnost je implicitně přidána " -"vždy, když potřebujeme řezat model)." +"Pokuste se opravit nemanifoldní meshe (tato možnost je implicitně přidána vždy, " +"když potřebujeme řezat model)." + +msgid "Tuning ironing" +msgstr "Ladění ironing" + +msgid "Twisting" +msgstr "Kroucení" msgid "Type" msgstr "Typ" @@ -8715,10 +12872,9 @@ msgstr "Zpět" msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" -msgstr[0] "%1$d Akce Zpět" -msgstr[1] "%1$d Akce Zpět" -msgstr[2] "%1$d Akcí Zpět" -msgstr[3] "%1$d Akcí Zpět" +msgstr[0] "Zpět %1$d Akce" +msgstr[1] "Zpět %1$d Akce" +msgstr[2] "Zpět %1$d Akcí" msgid "Undo / Redo is processing" msgstr "Zpět / Vpřed se zpracovává" @@ -8762,18 +12918,17 @@ msgid "" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" -"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že některá nastavení byla změněna a nejsou " -"shodná se systémovými (výchozími) hodnotami pro danou skupinu nastavení. " -"Klikněte pro reset všech nastavení aktuální skupiny nastavení na systémové " -"hodnoty." +"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že některá nastavení byla změněna a nejsou shodná " +"se systémovými (výchozími) hodnotami pro danou skupinu nastavení. Klikněte pro " +"reset všech nastavení aktuální skupiny nastavení na systémové hodnoty." msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" -"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že se hodnota změnila a není shodná se " -"systémovou (nebo výchozí) hodnotou.\n" +"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že se hodnota změnila a není shodná se systémovou " +"(nebo výchozí) hodnotou.\n" "Klikněte pro reset současné hodnoty na systémovou hodnotu." msgid "Unsaved Changes" @@ -8822,8 +12977,8 @@ msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" -"Aktualizace nejsou nikdy nainstalovány bez vědomí uživatele a nikdy " -"nepřepíšou upravená uživatelská nastavení." +"Aktualizace nejsou nikdy nainstalovány bez vědomí uživatele a nikdy nepřepíšou " +"upravená uživatelská nastavení." msgid "Updating" msgstr "Probíhá aktualizace" @@ -8862,6 +13017,9 @@ msgstr "" "Pro modely letadel 3DLabPrint použijte \"Paritní vyplňování\". Použijte " "\"Uzavírání děr\" pro uzavření všech otvorů v modelu." +msgid "Use also for time estimate" +msgstr "Použít také pro odhad času" + msgid "Use another extruder" msgstr "Použít jiný extruder" @@ -8871,6 +13029,9 @@ msgstr "Podbarvení hodnot os v panelu Manipulace s objektem" msgid "Use custom size for toolbar icons" msgstr "Použít vlastní velikost ikon na panelu nástrojů" +msgid "Use custom tooltip" +msgstr "Použít vlastní popisek" + msgid "Use environment map" msgstr "Použít mapu prostředí" @@ -8889,9 +13050,29 @@ msgstr "Scéna v režimu „free camera“" msgid "Use inches" msgstr "Používat palce" +msgid "Use only as safeguards" +msgstr "Používejte pouze jako ochranu" + +msgid "" +"Use only one perimeter on first layer, to give more space to the top infill " +"pattern." +msgstr "" +"Použijte pouze jeden perimetr na první vrstvě, abyste poskytli více prostoru " +"hornímu vzoru výplně." + +msgid "" +"Use only one perimeter on flat top surface, to give more space to the top " +"infill pattern." +msgstr "" +"Používejte pouze jeden perimetr na plochém horním povrchu, abyste poskytli více " +"prostoru hornímu vzoru výplně." + msgid "Use pad" msgstr "Použít podložku" +msgid "Use part fan to cool hotend" +msgstr "K chlazení hotendu použijte ventilátor" + msgid "Use perspective camera" msgstr "Perspektivní zobrazení scény" @@ -8904,13 +13085,20 @@ msgstr "Pro 3D scénu použít rozlišení Retina" msgid "Use system menu for application" msgstr "V PrusaSliceru používat systémové nabídky" +msgid "" +"Use this option to set the axis letter associated with your printer's " +"extruder (usually E but some printers use A)." +msgstr "" +"Tuto volbu použijte k nastavení písmene osy spojeného s extruderem vaší tiskárny " +"(obvykle E, ale některé tiskárny používají A)." + msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "Toto nastavení použijte pro horizontální otočení vzoru." msgid "Use volumetric E" -msgstr "Použít volumetrickou hodnotu E" +msgstr "Použít objemovou hodnotu E" msgid "used" msgstr "použitý" @@ -8945,18 +13133,28 @@ msgstr "Uživatel" msgid "User presets" msgstr "Uživatelská přednastavení" +msgid "usually not necessary to change this" +msgstr "obvykle to není nutné měnit" + msgid "validation failed" msgstr "validace selhala" +msgid "Value is the same as the last saved preset, but is not the system value" +msgstr "" +"Hodnota je stejná jako poslední uložená předvolba, ale není systémovou hodnotou" + msgid "Value is the same as the system value" msgstr "Hodnota je shodná se systémovou hodnotou" +msgid "Value isn't taken into account, it's computed over an other field." +msgstr "Hodnota se nebere v úvahu, počítá se přes jiné pole." + msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" -"Hodnota byla změněna a není shodná se systémovou hodnotou nebo naposled " -"uloženým přednastavením" +"Hodnota byla změněna a není shodná se systémovou hodnotou nebo naposled uloženým " +"přednastavením" msgid "Values in this column are for Normal mode" msgstr "Hodnoty v tomto sloupci jsou pro Normální režim" @@ -8983,7 +13181,7 @@ msgid "variants" msgstr "varianty" msgid "vendor" -msgstr "výrobce" +msgstr "Výrobce" msgid "Vendor:" msgstr "Výrobce:" @@ -8997,6 +13195,12 @@ msgstr "Verze" msgid "version" msgstr "verze" +msgid "vertical" +msgstr "svislé" + +msgid "Vertical Hole shrinking compensation" +msgstr "Kompenzace zmenšování vertikální díry" + msgid "Vertical shells" msgstr "Svislé stěny" @@ -9009,6 +13213,9 @@ msgstr "Vertikální posuvník - Pohyb aktivním ukazatelem dolů" msgid "Vertical slider - Move active thumb Up" msgstr "Vertikální posuvník - Pohyb aktivním ukazatelem nahoru" +msgid "Very short layer time - began to decrease extrusion rate" +msgstr "Velmi krátká doba vrstvy - začít snižovat rychlost extruze" + msgid "View" msgstr "Zobrazení" @@ -9031,6 +13238,9 @@ msgstr "Vizualizuje již naslicovaný a uložený G-code" msgid "Visualizing supports" msgstr "Vizualizace podpěr" +msgid "Vol. flow" +msgstr "Obj. průtok" + msgid "Volume" msgstr "Objem" @@ -9041,7 +13251,7 @@ msgid "Volumes in Object reordered" msgstr "Změna pořadí Těles v Objektu" msgid "Volumetric" -msgstr "Volumetrický" +msgstr "Objemový" msgid "Volumetric flow hints not available" msgstr "Doporučení pro objemový průtok nejsou k dispozici" @@ -9055,6 +13265,19 @@ msgstr "Objemový průtok (mm³/s)" msgid "Volumetric speed" msgstr "Objemová rychlost" +msgid "Volumetric speed for Autospeed" +msgstr "Objemová rychlost pro Automatickou rychlost" + +msgid "Voron Cube" +msgstr "Voronova kostka" + +msgid "" +"Voron cubic cube with many features inside, with a bearing slot on top. " +"Better to check dimensional accuracy." +msgstr "" +"Voronská krychlová kostka s mnoha prvky uvnitř, s ložiskovou drážkou nahoře. Lepší " +"kontrolovat rozměrovou přesnost." + msgid "Wall thickness" msgstr "Tloušťka stěny" @@ -9076,6 +13299,29 @@ msgstr "Vítejte v %s Konfiguračním průvodci" msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "Co chcete udělat s přednastavením \"%1%\" po uložení?" +msgid "" +"When an extruder travels to an object (from the start position or from an " +"object to another), the nozzle height is guaranteed to be at least at this " +"value.\n" +"It's made to ensure the nozzle won't hit clips or things you have on your " +"bed. But be careful to not put a clip in the 'convex shape' of an object.\n" +"Set to 0 to disable." +msgstr "" +"Když extruder cestuje k objektu (z výchozí pozice nebo z objektu do jiného), je " +"zaručeno, že výška trysky bude alespoň na této hodnotě.\n" +"Je vyrobena tak, aby zajistila, že tryska nenarazí do klipů nebo věcí, které máte " +"na posteli. Dejte si ale pozor, abyste klip nevložili do 'konvexního tvaru' " +"předmětu.\"\n" +"Nastavte na 0 pro zakázání." + +msgid "" +"When an object is sliced, it will switch your view from the curent view to " +"the preview (and then gcode-preview) automatically, depending on the option " +"choosen." +msgstr "" +"Když je objekt rozřezán, přepne váš pohled z aktuálního pohledu na náhled (a poté " +"gcode-preview) automaticky, v závislosti na zvolené možnosti." + msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" @@ -9088,16 +13334,36 @@ msgid "" "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" -"Je-li zaškrtnuto, při každém přetažení souboru s projektem do aplikace se " -"zobrazí dialogové okno s výzvou k výběru akce, kterou se má soubor načíst." +"Je-li zaškrtnuto, při každém přetažení souboru s projektem do aplikace se zobrazí " +"dialogové okno s výzvou k výběru akce, kterou se má soubor načíst." + +msgid "" +"when printing %s with a volumetric rate of %3.2f mm³/s at filament speed " +"%3.2f mm/s." +msgstr "" +"při tisku %s objemovou rychlostí %3.2f mm³/s při rychlosti vlákna %3.2f mm/s." msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" -"Připnutí překrývajících se objektů jeden k druhému při Multimateriálovém " -"tisku. (Druhá část se připne k první, třetí část k první a druhé, atd.)" +"Připnutí překrývajících se objektů jeden k druhému při Multimateriálovém tisku. " +"(Druhá část se připne k první, třetí část k první a druhé, atd.)" + +msgid "" +"When printing multiple objects or copies on after another, this will help " +"you to choose how it's ordered.\n" +"Object will sort them by the order of the right panel.\n" +"Lowest Y will sort them by their lowest Y point. Useful for printers with a " +"X-bar.\n" +"Lowest Z will sort them by their height, useful for delta printers." +msgstr "" +"Když tisknete více objektů nebo kopií po sobě, pomůže vám to vybrat, jak to bude " +"uspořádáno.\n" +"Objekt je seřadí podle pořadí na pravém panelu.\n" +"Nejnižší Y je seřadí podle nejnižšího bodu Y. Užitečné pro tiskárny s X-bar.\n" +"Nejnižší Z je seřadí podle jejich výšky, což je užitečné pro delta tiskárny." msgid "" "When printing multiple objects or copies, this feature will complete each " @@ -9105,19 +13371,57 @@ msgid "" "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" -"Při tisku více objektů nebo kopií tiskárna kompletně dokončí jeden objekt, " -"předtím než začne tisknout druhý (začíná od spodní vrstvy). Tato vlastnost " -"je výhodná z důvodů snížení rizika zničených výtisků. Slic3r by měl varovat " -"při možné kolizi extruderu s objektem a zabránit mu, přesto doporučujeme " -"obezřetnost." +"Při tisku více objektů nebo kopií tiskárna kompletně dokončí jeden objekt, předtím " +"než začne tisknout druhý (začíná od spodní vrstvy). Tato vlastnost je výhodná z " +"důvodů snížení rizika zničených výtisků. Slic3r by měl varovat při možné kolizi " +"extruderu s objektem a zabránit mu, přesto doporučujeme obezřetnost." + +msgid "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 75%) over the lowest nozzle diameter used in by the object." +msgstr "" +"Při tisku s velmi malými výškami vrstev můžete přesto chtít tisknout silnější " +"spodní vrstvu, abyste zlepšili přilnavost a toleranci pro nedokonalé stavební " +"desky. To lze vyjádřit jako absolutní hodnotu nebo jako procento (například: 75 %) " +"nad nejnižší průměr trysky používaný objektem." + +msgid "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder).\n" +"Note: This value will be unretracted when this extruder will load the next " +"time." +msgstr "" +"Když se před výměnou nástroje spustí zatahování, vlákno se vytáhne zpět o zadanou " +"hodnotu (délka se měří na surovém vláknu, než vstoupí do extrudéru).\n" +"Poznámka: Tato hodnota bude zrušena, když se tento extruder načte příště." msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" -"Při spuštění retrakce se filament zatáhne zpět o zadané množství (délka se " -"měří na surovém filamentu, než vstoupí do extruderu)." +"Při spuštění retrakce se filament zatáhne zpět o zadané množství (délka se měří na " +"surovém filamentu, než vstoupí do extruderu)." + +msgid "" +"When set to a non-zero value this fan speed is used only for external " +"perimeters (visible ones). \n" +"Set to 1 to disable the fan.\n" +"Set to -1 to use the normal fan speed on external perimeters.External " +"perimeters can benefit from higher fan speed to improve surface finish, " +"while internal perimeters, infill, etc. benefit from lower fan speed to " +"improve layer adhesion." +msgstr "" +"Při nastavení na nenulovou hodnotu se tato rychlost ventilátoru používá pouze pro " +"vnější perimetry (viditelné). \n" +"Nastavením na 1 deaktivujete ventilátor.\n" +"Nastavte na -1 pro použití normální rychlosti ventilátoru na vnějších perimetrech. " +"Externí perimetry mohou těžit z vyšší rychlosti ventilátoru pro zlepšení povrchové " +"úpravy, zatímco vnitřní perimetry, výplň atd. těží z nižší rychlosti ventilátoru " +"pro zlepšení adheze vrstvy." msgid "" "When set to zero, the distance the filament is moved from parking position " @@ -9125,10 +13429,28 @@ msgid "" "positive, it is loaded further, if negative, the loading move is shorter " "than unloading. " msgstr "" -"Když je hodnota nastavena na nulu, vzdálenost o kterou se filament posune " -"během zavádění, je stejná, jako zpětný posun během vysouvání filamentu. Je-" -"li hodnota kladná, je filament posunut více,. Je-li hodnota záporná, posun " -"při zavádění je kratší než při vysouvání. " +"Když je hodnota nastavena na nulu, vzdálenost o kterou se filament posune během " +"zavádění, je stejná, jako zpětný posun během vysouvání filamentu. Je-li hodnota " +"kladná, je filament posunut více,. Je-li hodnota záporná, posun při zavádění je " +"kratší než při vysouvání. " + +msgid "" +"When the external perimeter loop extrusion ends, a wipe is done, going " +"slightly inside the print. The number in this settting increases the wipe by " +"moving the nozzle along the loop again before the final wipe." +msgstr "" +"Když vysunutí vnější perimetrové smyčky skončí, provede se setření, mírně dovnitř " +"tisku. Číslo v tomto nastavení zvýší setření tím, že před posledním setřením znovu " +"posunete trysku podél smyčky." + +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament (but not on the first extruder after " +"start, as it should already be loaded)." +msgstr "" +"Když je zatažení kompenzováno po výměně nástroje, extrudér zatlačí toto dodatečné " +"množství vlákna (ale ne na první extrudér po spuštění, protože by již měl být " +"nabitý)." msgid "" "When the retraction is compensated after the travel move, the extruder will " @@ -9137,12 +13459,30 @@ msgstr "" "Když je retrakce kompenzována po rychloposunu, extruder vytlačuje toto další " "množství filamentu. Toto nastavení je zřídkakdy potřeba." +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the brim at the beginning of each object. if you prefer to have more place " +"for you objects, you can print all the brims at the beginning, so ther is " +"less problem with collision." +msgstr "" +"Při použití Dokončení jednotlivých objektů je výchozím chováním nakreslit okraj na " +"začátek každého objektu. Pokud chcete mít pro své objekty více místa, můžete " +"vytisknout všechny okraje na začátku, takže je méně problémů s kolizí." + +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the skirt around each object. if you prefer to have only one skirt for the " +"whole platter, use this option." +msgstr "" +"Při použití 'Dokončení jednotlivých objektů' je výchozím chováním nakreslit sukni " +"kolem každého objektu. Pokud dáváte přednost pouze jedné sukni pro celý talíř, " +"použijte tuto možnost." + msgid "WHITE BULLET" msgstr "BÍLÁ TEČKA" msgid "WHITE BULLET icon indicates a non system (or non default) preset." -msgstr "" -"Ikona BÍLÉ TEČKY indikuje nesystémové (nebo jiné než výchozí) přednastavení." +msgstr "Ikona BÍLÉ TEČKY indikuje nesystémové (nebo jiné než výchozí) přednastavení." msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " @@ -9155,8 +13495,7 @@ msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" -"Ikona BÍLÉ TEČKY indikuje, že je hodnota shodná s naposledy uloženým " -"přednastavením." +"Ikona BÍLÉ TEČKY indikuje, že je hodnota shodná s naposledy uloženým přednastavením." msgid "Whole word" msgstr "Celé slovo" @@ -9164,6 +13503,12 @@ msgstr "Celé slovo" msgid "Width" msgstr "Šířka" +msgid "width" +msgstr "Šířka" + +msgid "Width & Flow" +msgstr "Šířka a průtok" + msgid "Width (mm)" msgstr "Šířka (mm)" @@ -9173,6 +13518,13 @@ msgstr "Šířka od středu zadní koule ke středu přední koule" msgid "Width of a wipe tower" msgstr "Šířka čistící věže" +msgid "" +"Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) " +"only one nozzle diameter." +msgstr "" +"Šířka okraje pro stírací věž. Může být v mm nebo v % z (předpokládaného) průměru " +"pouze jedné trysky." + msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "Šířka spojek, které spojují objekt s vygenerovanou podložkou." @@ -9180,22 +13532,40 @@ msgstr "Šířka spojek, které spojují objekt s vygenerovanou podložkou." msgid "Width of the display" msgstr "Šířka displeje" +msgid "width&spacing combo" +msgstr "Vzdálenost" + +msgid "will be turned off by default." +msgstr "bude ve výchozím nastavení vypnuto." + msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" -"Vytvoří offset každé vrstvy v rovině XY. Kladná hodnota - offset směrem ven, " -"plocha polygonu se zvětší. Záporná hodnota - offset směrem dovnitř, plocha " -"polygonu se zmenší." +"Vytvoří offset každé vrstvy v rovině XY. Kladná hodnota - offset směrem ven, plocha " +"polygonu se zvětší. Záporná hodnota - offset směrem dovnitř, plocha polygonu se " +"zmenší." + +msgid "Will only take into account the delay for the cooling of overhangs." +msgstr "Bude zohledňovat pouze zpoždění chlazení převisů." + +msgid "will run at %1%%% by default" +msgstr "ve výchozím nastavení poběží na %1%%%" msgid "Wipe" msgstr "Čištění" msgid "Wipe into this object" -msgstr "Vyčistit do tohoto objektu" +msgstr "Očistit do tohoto objektu" msgid "Wipe into this object's infill" -msgstr "Vyčištění do výplně tohoto objektu" +msgstr "Očistit do výplně tohoto objektu" + +msgid "Wipe only when crossing perimeters" +msgstr "Očistit pouze při překračování perimetrů" + +msgid "Wipe speed" +msgstr "Rychlost očištění" msgid "Wipe Tower" msgstr "Čistící Věž" @@ -9215,12 +13585,24 @@ msgstr "Šířka límce čistící věže" msgid "Wipe tower parameters" msgstr "Parametry čistící věže" +msgid "Wipe tower position" +msgstr "Pozice čistící věže" + msgid "Wipe tower rotation angle" msgstr "Úhel natočení čistící věže" msgid "Wipe tower rotation angle with respect to x-axis." msgstr "Úhel natočení čistící věže s ohledem na osu X." +msgid "Wipe tower Width" +msgstr "Čistící věž Šířka" + +msgid "Wipe tower X" +msgstr "Čistící věž X" + +msgid "Wipe tower Y" +msgstr "Čistící věž Y" + msgid "Wipe while retracting" msgstr "Očistit při retrakci" @@ -9228,8 +13610,8 @@ msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" -"U bowdenových extrudérů může být vhodné provést rychlé retrakce než se " -"spustí očištění." +"U bowdenových extruderů může být vhodné provést rychlé retrakce než se spustí " +"očištění." msgid "" "With draft shield active, the skirt will be printed skirt_distance from the " @@ -9262,8 +13644,8 @@ msgid "" msgstr "" "Přejete si spustit instalaci?\n" "\n" -"Nejprve bude provedena kompletní záloha nastavení. V případě problémů s " -"novou verzí ji bude možné kdykoliv obnovit.\n" +"Nejprve bude provedena kompletní záloha nastavení. V případě problémů s novou verzí " +"ji bude možné kdykoliv obnovit.\n" "\n" "Aktualizované balíčky nastavení:" @@ -9279,6 +13661,24 @@ msgstr "Chybné heslo" msgid "X coordinate of the left front corner of a wipe tower" msgstr "X souřadnice levého předního rohu čistící věže" +msgid "xy" +msgstr "xy" + +msgid "XY compensation" +msgstr "XY Kompenzace" + +msgid "XY First layer compensation" +msgstr "XY Kompenzace první vrstvy" + +msgid "XY First layer compensation height in layers" +msgstr "XY Výška kompenzace první vrstvy ve vrstvách" + +msgid "XY holes compensation" +msgstr "Kompenzace XY děr" + +msgid "XY holes threshold" +msgstr "Práh XY děr" + msgid "XY separation between an object and its support" msgstr "XY vzdálenost mezi objektem a podpěrami" @@ -9286,8 +13686,11 @@ msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" -"XY vzdálenost mezi objektem a podpěrami. Pokud je vyjádřeno procenty " -"(například 50%), bude vypočítána z šířky perimetru." +"XY vzdálenost mezi objektem a podpěrami. Pokud je vyjádřeno procenty (například " +"50%), bude vypočítána z šířky perimetru." + +msgid "xyz decimals" +msgstr "XYZ desetinná místa" msgid "Y coordinate of the left front corner of a wipe tower" msgstr "Y souřadnice levého předního rohu čistící věže" @@ -9301,6 +13704,85 @@ msgstr "" msgid "You are opening %1% version %2%." msgstr "Otevíráte %1% verze %2%." +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. the variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"Advice: before using a variable, it's safer to use the function 'default_XXX" +"(variable_name, default_value)' (enclosed in bracket as it's a script) in " +"case it's not set. You can replace XXX by 'int' 'bool' 'double' 'string'." +msgstr "" +"Můžete přidat data přístupná pro vlastní makra gcode.\n" +"Každý řádek může definovat jednu proměnnou.\n" +"Formát je 'název_proměnné=hodnota'. Název proměnné by měl mít pouze [a-zA-Z0-9] " +"znaky nebo '_'.\n" +"Hodnota, kterou lze analyzovat jako int nebo float, bude k dispozici jako číselná hodnota.\n" +"Hodnota, která je uzavřena do dvojitých uvozovek, bude k dispozici jako řetězec (bez " +"uvozovky)\n" +"Hodnota, která nabývá pouze hodnot 'true' nebo 'false', bude logická)\n" +"Každá další hodnota bude analyzována jako řetězec tak, jak je.\n" +"Rada: před použitím proměnné je bezpečnější použít funkci" +"'default_XXX(název_proměnné, výchozí_hodnota)' (uzavřeno v závorce, protože se jedná o skript) " +"v případě, že není nastaven. XXX můžete nahradit výrazem 'int' 'bool' 'double' 'řetězec'." + +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. The variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"These variables will be available as an array in the custom gcode (one item " +"per extruder), don't forget to use them with the {current_extruder} index to " +"get the current value. If a filament has a typo on the variable that change " +"its type, then the parser will convert evrything to strings.\n" +"Advice: before using a variable, it's safer to use the function 'default_XXX" +"(variable_name, default_value)' (enclosed in bracket as it's a script) in " +"case it's not set. You can replace XXX by 'int' 'bool' 'double' 'string'." +msgstr "" +"Můžete přidat data přístupná pro vlastní makra gcode.\n" +"Každý řádek může definovat jednu proměnnou.\n" +"Formát je 'název_proměnné=hodnota'. Název proměnné by měl mít pouze [a-zA-Z0-9] " +"znaky nebo '_'.\n" +"Hodnota, kterou lze analyzovat jako int nebo float, bude k dispozici jako číselná hodnota.\n" +"Hodnota, která je uzavřena do dvojitých uvozovek, bude k dispozici jako řetězec (bez " +"uvozovky)\n" +"Hodnota, která nabývá pouze hodnot 'true' nebo 'false', bude logická)\n" +"Každá další hodnota bude analyzována jako řetězec tak, jak je.\n" +"Tyto proměnné budou dostupné jako pole ve vlastním gcode (jedna položka na " +"extruder), nezapomeňte je použít s indexem {current_extruder}, abyste získali " +"aktuální hodnota. Pokud má vlákno v proměnné překlep, který mění jeho typ, pak " +"analyzátor převede vše na řetězce.\n" +"Rada: před použitím proměnné je bezpečnější použít funkci" +"'default_XXX(název_proměnné, výchozí_hodnota)' (uzavřeno v závorce, protože se jedná o skript) " +"v případě, že není nastaven. XXX můžete nahradit výrazem 'int' 'bool' 'double' 'řetězec'." + +msgid "" +"You can choose the dimension of the cube. It's a simple scale, you can " +"modify it in the right panel yourself if you prefer. It's just quicker to " +"select it here." +msgstr "" +"Můžete si vybrat rozměr krychle. Je to jednoduché měřítko, pokud chcete, můžete si " +"ho upravit v pravém panelu sami. Jen je rychlejší vybrat ho zde." + +msgid "" +"You can increase this to over-extrude on the top layer if there is not " +"enough plastic to make a good fill." +msgstr "" +"Můžete to zvýšit, abyste přetlačili horní vrstvu, pokud není dostatek plastu pro " +"vytvoření dobré výplně." + msgid "You can keep presets modifications to the new project or discard them" msgstr "Úpravy přednastavení můžete v novém projektu ponechat nebo je zahodit" @@ -9329,28 +13811,35 @@ msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" -"Nastavením počtu prvních vrstev s vypnutým chlazením pro nezhoršování " -"přilnavosti." +"Nastavením počtu prvních vrstev s vypnutým chlazením pro nezhoršování přilnavosti." + +msgid "" +"You can use all configuration options as variables inside this template. For " +"example: {layer_height}, {fill_density} etc. You can also use {timestamp}, " +"{year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " +"{input_filename}, {input_filename_base}." +msgstr "" +"V této šabloně můžete jako proměnné použít všechny možnosti konfigurace. Například: " +"{layer_height}, {fill_density} atd. Můžete také použít {timestamp}, {year}, " +"{month}, {day}, {hour}, { minute}, {second}, {version}, {input_filename}, " +"{input_filename_base}." msgid "You can't change a type of the last solid part of the object." msgstr "Nelze změnit typ poslední plné části objektu." msgid "" -"You can't to add the object(s) from %s because of one or some of them " -"is(are) multi-part" +"You can't to add the object(s) from %s because of one or some of them is" +"(are) multi-part" msgstr "" -"Nemůžete přidat objekt(y) z %s, protože jeden nebo některé z nich je(jsou) " -"vícedílné" +"Nemůžete přidat objekt(y) z %s, protože jeden nebo některé z nich je(jsou) vícedílné" msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" -"Nelze načíst SLA projekt s objektem na podložce, který je složený z více " -"částí" +"Nelze načíst SLA projekt s objektem na podložce, který je složený z více částí" msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" -msgstr "" -"Nemůžete použít nestejnoměrnou změnu měřítka pro více vybraných objektů/částí" +msgstr "Nemůžete použít nestejnoměrnou změnu měřítka pro více vybraných objektů/částí" msgid "" "You have just added a G-code for color change, but its value is empty.\n" @@ -9371,8 +13860,8 @@ msgstr "" msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" -"Následující přednastavení máte s uloženým nastavením pro „Nahrávání do " -"tiskového serveru“" +"Následující přednastavení máte s uloženým nastavením pro „Nahrávání do tiskového " +"serveru“" msgid "You may need to update your graphics card driver." msgstr "Možná budete muset aktualizovat ovladač grafické karty." @@ -9415,8 +13904,7 @@ msgstr "Vaše aktuálně provedené změny odstraní všechny uložené změny b msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" -"Vaše aktuálně provedené změny odstraní všechny uložené změny extruderu " -"(nástroje)." +"Vaše aktuálně provedené změny odstraní všechny uložené změny extruderu (nástroje)." msgid "Your file was repaired." msgstr "Váš soubor byl opraven." @@ -9425,18 +13913,32 @@ msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" -"Váš objekt se zdá být příliš velký, takže byl automaticky zmenšen, aby se " -"vešel na tiskovou podložku." +"Váš objekt se zdá být příliš velký, takže byl automaticky zmenšen, aby se vešel na " +"tiskovou podložku." msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." -msgstr "" -"Váš tisk je velmi blízko čistícím oblastem. Zajistěte, aby nedošlo ke kolizi." +msgstr "Váš tisk je velmi blízko čistícím oblastem. Zajistěte, aby nedošlo ke kolizi." + +msgid "Z full step" +msgstr "Z úplný krok" msgid "Z offset" msgstr "Odsazení Z" +msgid "Z Travel" +msgstr "Z cestování" + +msgid "Z travel speed" +msgstr "Rychlost jízdy Z" + +msgid "Z-lift override" +msgstr "Přemostění Z-lift" + +msgid "Z-offset" +msgstr "Z-offset" + msgid "Zig-Zag" msgstr "Zig-Zag" diff --git a/resources/localization/cs/TODO.po b/resources/localization/cs/TODO.po index d87691fb6..a893bf990 100644 --- a/resources/localization/cs/TODO.po +++ b/resources/localization/cs/TODO.po @@ -1,26 +1,11 @@ -#: src/slic3r/GUI/PresetHints.cpp:78 src/slic3r/GUI/PresetHints.cpp:118 -#: src/slic3r/GUI/PresetHints.cpp:135 -#, possible-boost-format -msgid " and will gradually speed-up to the above speeds over %1% layers" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1125 -msgid "" -" Tab layout: all windows are in the application, all are selectable via a " -"tab." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1123 -msgid "!! Can be unstable in some os distribution !!" +#: src/libslic3r/PrintConfig.cpp:5243 +msgid "$ per hour" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5227 -msgid "$ per hour" +#: ../../ui_layout/default/print.ui : l281 +msgid "% of perimeter flow" msgstr "" @@ -30,7 +15,7 @@ msgid "%1% is closing" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1390 +#: src/slic3r/GUI/GUI_App.cpp:1392 #, possible-boost-format msgid "%1% started after a crash" msgstr "" @@ -39,35 +24,49 @@ msgstr "" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:910 #, possible-boost-format #Similar to me: %1% will remember your action. +# 2 changes: %s will remember your action. +# translation: %s si zapamatuje vaši akci. +# 7 changes: %s will remember your choice. +# translation: %s si zapamatuje vaši volbu. # 11 changes: PrusaSlicer will remember your action. # translation: PrusaSlicer si vaši akci zapamatuje. msgid "%1% will remember your action." msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:3341 src/slic3r/GUI/Plater.cpp:1720 +#: src/slic3r/GUI/GUI_App.cpp:3343 src/slic3r/GUI/Plater.cpp:1756 #, possible-boost-format #Similar to me: %1% will remember your choice. +# 2 changes: %s will remember your choice. +# translation: %s si zapamatuje vaši volbu. +# 7 changes: %s will remember your action. +# translation: %s si zapamatuje vaši akci. # 11 changes: PrusaSlicer will remember your choice. # translation: PrusaSlicer si zapamatuje vaši volbu. msgid "%1% will remember your choice." msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:3345 src/slic3r/GUI/Plater.cpp:1726 +#: src/slic3r/GUI/GUI_App.cpp:3347 src/slic3r/GUI/Plater.cpp:1762 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:913 #, possible-boost-format +#Similar to me: %1%: Don't ask me again +# 2 changes: %s: Don't ask me again +# translation: %s: Už se mě neptat msgid "%1%: Don't ask me again" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:3334 +#: src/slic3r/GUI/GUI_App.cpp:3336 #, possible-boost-format +#Similar to me: %1%: Open hyperlink +# 3 changes: : Open hyperlink +# translation: : Otevřít hypertextový odkaz msgid "%1%: Open hyperlink" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1391 +#: src/slic3r/GUI/GUI_App.cpp:1393 #, possible-boost-format #Similar to me: %5% crashed last time when attempting to set window position.\nWe are sorry for the inconvenience, it unfortunately happens with certain multiple-monitor setups.\nMore precise reason for the crash: \"%1%\".\nFor more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n\nTo avoid this problem, consider disabling \"%4%\" in \"Preferences\". Otherwise, the application will most likely crash again next time. # 11 changes: PrusaSlicer crashed last time when attempting to set window position.\nWe are sorry for the inconvenience, it unfortunately happens with certain multiple-monitor setups.\nMore precise reason for the crash: \"%1%\".\nFor more information see our GitHub issue tracker: \"%2%\" and \"%3%\"\n\nTo avoid this problem, consider disabling \"%4%\" in \"Preferences\". Otherwise, the application will most likely crash again next time. @@ -84,8702 +83,2293 @@ msgid "" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:459 src/slic3r/GUI/PresetHints.cpp:464 -#, possible-c-format, possible-boost-format -#Similar to me: %d perimeter: %.2f mm -# 7 changes: %d lines: %.2f mm -# translation: %d perimetry: %.2f mm -msgid "%d perimeter: %.2f mm" +#: src/slic3r/GUI/OpenGLManager.cpp:258 +#Similar to me: %s requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %1%, render %2%, vendor %3% was detected. +# 6 changes: %s requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected. +# translation: %s vyžaduje ke správnému fungování grafický ovladač podporující OpenGL 2.0, \nzatímco verze OpenGL %s, render %s, byl zjištěn dodavatel. +# 16 changes: PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected. +# translation: PrusaSlicer vyžaduje grafický ovladač s funkčním OpenGL 2.0. Zatímco byla detekována verze OpenGL %s, render %s, výrobce %s. +msgid "" +"%s requires OpenGL 2.0 capable graphics driver to run correctly, \n" +"while OpenGL version %1%, render %2%, vendor %3% was detected." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:388 -#, possible-c-format, possible-boost-format -#Similar to me: %s flow rate is maximized -# 4 changes: flow rate is maximized -# translation: průtok je maximalizován -msgid "%s flow rate is maximized " +#: src/slic3r/GUI/MainFrame.cpp:1868 +#Similar to me: 3D &Platter Tab +# 1 changes: 3D &Plater Tab +# translation: Karta 3D &Pohled +# 4 changes: &Plater Tab +# translation: &Panel Podložka +msgid "3D &Platter Tab" msgstr "" - -#: src/slic3r/GUI/GUI_Init.cpp:83 src/slic3r/GUI/GUI_Init.cpp:86 -#, possible-c-format, possible-boost-format -#Similar to me: %s GUI initialization failed -# 10 changes: PrusaSlicer GUI initialization failed -# translation: Inicializace grafického uživatelského rozhraní PrusaSliceru se nezdařila -msgid "%s GUI initialization failed" +#: ../../ui_layout/default/print.ui +msgid "_" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:720 -#, possible-c-format, possible-boost-format -#Similar to me: %s has encountered a localization error. Please report to %s team, what language was active and in which scenario this issue happened. Thank you.\n\nThe application will now terminate. -# 20 changes: PrusaSlicer has encountered a localization error. Please report to PrusaSlicer team, what language was active and in which scenario this issue happened. Thank you.\n\nThe application will now terminate. -# translation: V aplikaci PrusaSlicer došlo k chybě v lokalizaci. Nahlaste PrusaSlicer týmu, jaký jazyk byl aktivní a ve kterém scénáři k tomuto problému došlo. Děkujeme.\n\nAplikace bude nyní ukončena. +#: src/libslic3r/PrintConfig.cpp:2583 msgid "" -"%s has encountered a localization error. Please report to %s team, what " -"language was active and in which scenario this issue happened. Thank you.\n" -"\n" -"The application will now terminate." +"A percentage of the perimeter flow (mm3/s) is used as a limit for the gap " +"fill flow, and so the gapfill may reduce its speed when the gap fill " +"extrusions became too thick. This allow you to use a high gapfill speed, to " +"print the thin gapfill quickly and reduce the difference in flow rate for " +"the gapfill.\n" +"Set zero to deactivate." msgstr "" -#: src/slic3r/GUI/UpdateDialogs.cpp:95 +#: src/libslic3r/PrintConfig.cpp:5400 #, possible-c-format, possible-boost-format -#Similar to me: %s is not using the newest configuration available.\nConfiguration Wizard may not offer the latest printers, filaments and SLA materials to be installed. -# 11 changes: PrusaSlicer is not using the newest configuration available.\nConfiguration Wizard may not offer the latest printers, filaments and SLA materials to be installed. -# translation: PrusaSlicer nepoužívá nejnovější dostupnou konfiguraci.\nPrůvodce nastavením proto nemusí k instalaci nabízet nejnovější tiskárny, filamenty a SLA materiály. msgid "" -"%s is not using the newest configuration available.\n" -"Configuration Wizard may not offer the latest printers, filaments and SLA " -"materials to be installed. " +"Acceleration for travel moves (jumps between distant extrusion points).\n" +"Can be a % of the default acceleration\n" +"Set zero to use default acceleration for travel moves." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1559 +#: src/libslic3r/PrintConfig.cpp:1434 #, possible-c-format, possible-boost-format -msgid "%s Releases" -msgstr "" - - -#: src/slic3r/GUI/OpenGLManager.cpp:258 -#Similar to me: %s requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %1%, render %2%, vendor %3% was detected. -# 16 changes: PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \nwhile OpenGL version %s, render %s, vendor %s was detected. -# translation: PrusaSlicer vyžaduje grafický ovladač s funkčním OpenGL 2.0. Zatímco byla detekována verze OpenGL %s, render %s, výrobce %s. +#Similar to me: Activate this option to modify the flow to acknowledge that the nozzle is round and the corners will have a round shape, and so change the flow to realize that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\nNote: At 100% this changes the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer. +# 106 changes: Activate this option to modify the flow to acknowledge that the nozzle is round and the corners will have a round shape, and so change the flow to realize that and avoid over-extrusion. 100% is activated, 0% is deactivated and 50% is half-activated.\nNote: At 100% this changes the flow by ~5% over a very small distance (~nozzle diameter), so it shouldn't be noticeable unless you have a very big nozzle and a very precise printer.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it. +# translation: Aktivujte tuto možnost, chcete-li upravit průtok, abyste potvrdili, že tryska je kulatý a rohy budou mít kulatý tvar, a tak změňte tok na uvědomte si to a vyhněte se nadměrnému vytlačování. 100 % je aktivováno, 0 % je deaktivovánoa 50 % je napůl aktivováno.\nPoznámka: Při 100% to změní průtok o ~5% na velmi malou vzdálenost.(~průměr trysky), takže by to nemělo být patrné, pokud nemáte velmi velký tryska a velmi přesná tiskárna.\nJe to velmi experimentální, prosím podejte zprávu o užitečnosti. Může to býtodstraněno, pokud pro to není použití. msgid "" -"%s requires OpenGL 2.0 capable graphics driver to run correctly, \n" -"while OpenGL version %1%, render %2%, vendor %3% was detected." +"Activate this option to modify the flow to acknowledge that the nozzle is " +"round and the corners will have a round shape, and so change the flow to " +"realize that and avoid over-extrusion. 100% is activated, 0% is deactivated " +"and 50% is half-activated.\n" +"Note: At 100% this changes the flow by ~5% over a very small distance " +"(~nozzle diameter), so it shouldn't be noticeable unless you have a very big " +"nozzle and a very precise printer." msgstr "" - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 -#, possible-c-format, possible-boost-format -#Similar to me: %s version -# 3 changes: version -# translation: verze -# 4 changes: %s error -# translation: %s chyba -# 4 changes: New version: -# translation: Nová verze: -msgid "%s version" +#: ../../ui_layout/default/print.ui +#Similar to me: advanced +# 1 changes: Advanced +# translation: Pokročilé +# 3 changes: Balanced +# translation: Vyvážené +msgid "advanced" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1563 -#, possible-c-format, possible-boost-format -#Similar to me: %s website -# 2 changes: %s &Website -# translation: %s &Webová stránka -msgid "%s website" +#: src/libslic3r/PrintConfig.cpp:4220 +#Similar to me: All surfaces +# 3 changes: On surfaces +# translation: Na površích +# 4 changes: All top surfaces +# translation: Všechny horní povrchy +# 4 changes: Min surface +# translation: Min povrch +msgid "All surfaces" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1561 -#, possible-c-format, possible-boost-format -msgid "%s wiki" +#: src/slic3r/GUI/ImGuiWrapper.cpp:1009 src/slic3r/GUI/Search.cpp:628 +#Similar to me: All tags +# 3 changes: All walls +# translation: Všechny stěny +msgid "All tags" msgstr "" -#: src/slic3r/GUI/ConfigWizard.cpp:1299 -#, possible-c-format, possible-boost-format -#Similar to me: %s's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\nThe Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively. -# 10 changes: PrusaSlicer's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\nThe Simple mode shows only the most frequently used settings relevant for regular 3D printing. The other two offer progressively more sophisticated fine-tuning, they are suitable for advanced and expert users, respectively. -# translation: Uživatelské rozhraní PrusaSlicer je k dispozici ve třech variantách:\nJednoduché, pokročilé a expertní.\nJednoduchý režim zobrazuje pouze nejčastěji používaná nastavení relevantní pro běžný 3D tisk. Další dva nabízejí detailnější doladění a proto jsou vhodné pro pokročilé a expertní uživatele. +#: src/libslic3r/PrintConfig.cpp:5149 msgid "" -"%s's user interfaces comes in three variants:\n" -"Simple, Advanced, and Expert.\n" -"The Simple mode shows only the most frequently used settings relevant for " -"regular 3D printing. The other two offer progressively more sophisticated " -"fine-tuning, they are suitable for advanced and expert users, respectively." +"Allow all perimeters to overlap, instead of just external ones.\n" +"100% means that perimeters can overlap completly on top of each other.\n" +"0% will deactivate this setting" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1997 -#Similar to me: &Generate -# 3 changes: General -# translation: Obecné -msgid "&Generate" +#: src/libslic3r/PrintConfig.cpp:5138 +#Similar to me: Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that flow isn't adjusted and so this will result in over-extruding and undefined behavior.\n100% means that perimeters can overlap completly on top of each other.\n0% will deactivate this setting +# 105 changes: Allow outermost perimeter to overlap itself to avoid the use of thin walls. Note that flow isn't adjusted and so this will result in over-extruding and undefined behavior. +# translation: Umožněte vnějšímu perimetru, aby se překrýval, abyste se vyhnuli použití tenkých stěn. Všimněte si, že tok není upraven, takže to povede k nadměrnému vytlačování a. +msgid "" +"Allow outermost perimeter to overlap itself to avoid the use of thin walls. " +"Note that flow isn't adjusted and so this will result in over-extruding and " +"undefined behavior.\n" +"100% means that perimeters can overlap completly on top of each other.\n" +"0% will deactivate this setting" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3701 -msgid "'As bridge' flow threshold" +#: src/slic3r/GUI/Preferences.cpp:353 +#Similar to me: Always ask for unsaved changes in presets, when: \n- Closing Slic3r while some presets are modified,\n- Loading a new project while some presets are modified +# 6 changes: Always ask for unsaved changes in presets, when: \n- Closing PrusaSlicer while some presets are modified,\n- Loading a new project while some presets are modified +# translation: Vždy se dotázat na neuložené změny přednastavení během: \n- zavírání PrusaSliceru, pokud došlo k úpravě některých přednastavení,\n- načítání nového projektu, pokud došlo k úpravě některých přednastavení. +# 45 changes: You will not be asked about the unsaved changes in presets the next time you: \n- Closing PrusaSlicer while some presets are modified,\n- Loading a new project while some presets are modified +# translation: Příště již nebudete dotázáni na neuložené změny během: \n- zavírání PrusaSliceru, pokud došlo k úpravě některých přednastavení,\n- načítání nového projektu, zatímco v přednastavení máte neuložené změny. +msgid "" +"Always ask for unsaved changes in presets, when: \n" +"- Closing Slic3r while some presets are modified,\n" +"- Loading a new project while some presets are modified" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3689 -msgid "'As bridge' speed threshold" +#: src/slic3r/GUI/Preferences.cpp:344 +#Similar to me: Always ask for unsaved changes in project, when: \n- Closing Slic3r,\n- Loading or creating a new project +# 6 changes: Always ask for unsaved changes in project, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project +# translation: Vždy se dotázat na neuložené změny přednastavení během: \n- zavírání PrusaSliceru,\n- načítání nebo vytváření nového projektu. +# 37 changes: You will not be asked about it again, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project +# translation: Nebudete znovu dotázáni při:\n- zavření PrusaSliceru,\n- načítání nebo vytváření nového projektu. +# 40 changes: Always ask for unsaved changes in presets when selecting new preset or resetting a preset +# translation: Při výběru nového přednastavení nebo resetování přednastavení se vždy dotazovat na neuložené změny přednastavení +msgid "" +"Always ask for unsaved changes in project, when: \n" +"- Closing Slic3r,\n" +"- Loading or creating a new project" msgstr "" -#: src/slic3r/GUI/Tab.cpp:4742 src/slic3r/GUI/Tab.cpp:4750 -#: src/slic3r/GUI/Tab.cpp:4754 +#: src/slic3r/GUI/OpenGLManager.cpp:265 +#, possible-boost-format +#Similar to me: As a workaround, you may run %1% with a software rendered 3D graphics by running %2%.exe with the --sw-renderer parameter. +# 4 changes: As a workaround, you may run %s with a software rendered 3D graphics by running %s.exe with the --sw-renderer parameter. +# translation: Jako řešení můžete spustit %s se softwarově vykreslenou 3D grafikou pomocí spuštění %s.exe s parametrem --sw-renderer. +# 23 changes: As a workaround, you may run PrusaSlicer with a software rendered 3D graphics by running prusa-slicer.exe with the --sw-renderer parameter. +# translation: PrusaSlicer můžete spustit se softwarovým vykreslováním 3D grafiky pomocí spuštění programu prusa-slicer.exe s parametrem --sw-renderer. msgid "" -"(even if the acceleration is set to 3000 in the print profile, if this is at " -"1500, it won't export a gcode that will tell to go over 1500)." +"As a workaround, you may run %1% with a software rendered 3D graphics by " +"running %2%.exe with the --sw-renderer parameter." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:145 -#, possible-boost-format -msgid "" -"(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)" +#: src/slic3r/GUI/Preferences.cpp:374 +msgid "Ask for 'new project' on 'Delete all'" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:148 +#: src/slic3r/GUI/PresetHints.cpp:58 src/slic3r/GUI/PresetHints.cpp:101 #, possible-boost-format -msgid "(however, speed will never be reduced below %1%mm/s)" +#Similar to me: at %1%%% over support interface surfaces +# 14 changes: at %1%%% over top fill surfaces +# translation: na %1%%% nad horními výplňovými plochami +msgid "at %1%%% over support interface surfaces" msgstr "" +#: ../../ui_layout/default/extruder.ui : l39 +msgid "At end" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:2783 -msgid "0 (Simple connect)" +#: ../../ui_layout/default/extruder.ui : l38 +msgid "At start" msgstr "" -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "2x10°" +#: src/slic3r/GUI/Field.cpp:611 +msgid "" +"Auto Speed will try to maintain a constant flow rate accross all print " +"moves.\n" +"It is not recommended to include gap moves to the Auto Speed calculation(by " +"setting this value to 0).\n" +"Very thin gap extrusions will often not max out the flow rate of your " +"printer.\n" +"As a result, this will cause Auto Speed to lower the speeds of all other " +"print moves to match the low flow rate of these thin gaps." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1873 -#Similar to me: 3D &Platter Tab -# 4 changes: &Plater Tab -# translation: &Panel Podložka -msgid "3D &Platter Tab" +#: src/slic3r/GUI/Tab.cpp:4920 +#Similar to me: BACK ARROW icon indicates that the values this widget control were changed and at least one is not equal to the last saved preset.\nClick to reset current all values to the last saved preset. +# 42 changes: BACK ARROW icon indicates that the value was changed and is not equal to the last saved preset.\nClick to reset current value to the last saved preset. +# translation: Ikona ŠIPKY ZPĚT indikuje, že se hodnota změnila a není shodná s naposledy uloženým přednastavením.\nKlikněte pro reset současné hodnoty na naposledy uložené přednastavení. +msgid "" +"BACK ARROW icon indicates that the values this widget control were changed " +"and at least one is not equal to the last saved preset.\n" +"Click to reset current all values to the last saved preset." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:360 src/slic3r/GUI/MainFrame.cpp:462 -#: src/slic3r/GUI/MainFrame.cpp:671 src/slic3r/GUI/MainFrame.cpp:714 -msgid "3D view" +#: src/libslic3r/PrintConfig.cpp:5489 +msgid "" +"Before extruding an external perimeter, this flag will place the nozzle a " +"bit inward and in advance of the seam position before unretracting. It will " +"then move to the seam position before extruding." msgstr "" -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "3x10°" +#: src/slic3r/GUI/SysInfoDialog.cpp:150 +#, possible-boost-format +#Similar to me: Blacklisted libraries loaded into %1% process: +# 11 changes: Blacklisted libraries loaded into PrusaSlicer process: +# translation: Blacklistované knihovny byly načteny do procesu PrusaSlicer: +msgid "Blacklisted libraries loaded into %1% process:" msgstr "" -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "3x5°" +#: src/libslic3r/PrintConfig.cpp:721 +#Similar to me: Bridge flow baseline +# 6 changes: Bridge flow ratio +# translation: Poměr průtoku při vytváření mostů +msgid "Bridge flow baseline" msgstr "" - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "4x10°" +#: ../../ui_layout/default/print.ui +#Similar to me: Bridge type +# 3 changes: Brim type +# translation: Typ límce +# 4 changes: Bridge flow +# translation: Průtok mostu +# 4 changes: Bridge speed +# translation: Rychlost mostu +msgid "Bridge type" msgstr "" -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "5x5°" +#: src/libslic3r/PrintConfig.cpp:869 src/libslic3r/PrintConfig.cpp:919 +msgid "Brim & Skirt" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3489 -msgid "" -"[Deprecated] Prefer using max_gcode_per_second instead, as it's much better " -"when you have very different speeds for features.\n" -"Too many too small commands may overload the firmware / connection. Put a " -"higher value here if you see strange slowdown.\n" -"Set zero to disable." +#: src/libslic3r/PrintConfig.cpp:870 +#Similar to me: Brim & Skirt acceleration +# 9 changes: Bridge acceleration +# translation: Zrychlení mostu +# 9 changes: Perimeter acceleration +# translation: Zrychlení Perimetru +# 10 changes: First layer acceleration +# translation: Zrychlení první vrstvy +msgid "Brim & Skirt acceleration" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:124 -#, possible-boost-format -msgid "" -"\n" -"\n" -"If estimated layer time is below ~%1%s" +#: src/libslic3r/PrintConfig.cpp:920 +msgid "Brim & Skirt speed" +msgstr "" + +#: ../../ui_layout/default/printer_fff.ui +#Similar to me: build volume +# 4 changes: build %lu +# translation: sestavení %lu +msgid "build volume" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:88 -#, possible-boost-format -#Similar to me: \n\nIf estimated layer time is below ~%1%s, but still greater than ~%2%s, fan will run at a proportionally increasing speed between %3%%% and %4%%% -# 32 changes: If estimated layer time is greater, but still below ~%1%s, fan will run at a proportionally decreasing speed between %2%%% and %3%%%. -# translation: Pokud je odhadovaný čas vrstvy delší, ale stále pod ~%1%s, bude ventilátor pracovat s plynule klesající rychlostí mezi %2%%% a %3%%%. +#: src/libslic3r/PrintConfig.cpp:5509 +#, possible-c-format, possible-boost-format msgid "" -"\n" -"\n" -"If estimated layer time is below ~%1%s, but still greater than ~%2%s, fan " -"will run at a proportionally increasing speed between %3%%% and %4%%%" +"By how much the 'wipe inside' can dive inside the object (if possible)?\n" +"In % of the perimeter width.\n" +"Note: don't put a value higher than 50% if you have only one perimeter, or " +"150% for two perimeter, etc... or it will ooze instead of wipe." msgstr "" -#: ../../ui_layout/default/print.ui -msgid "_" + +#: src/slic3r/GUI/ConfigWizard.cpp:152 +#, possible-boost-format +msgid "Can't open directory '%1%'. Config bundles from here can't be loaded." msgstr "" -#: src/libslic3r/PrintConfig.cpp:760 -#Similar to me: Above bridge flow ratio -# 7 changes: Bridge flow ratio -# translation: Poměr průtoku při vytváření mostů -msgid "Above bridge flow ratio" +#: src/libslic3r/PrintConfig.cpp:2581 +msgid "Cap gapfill speed with perimeter flow" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:759 -msgid "Above the bridges" +#: ../../ui_layout/default/print.ui : l281 +msgid "Cap with" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5384 -#, possible-c-format, possible-boost-format -msgid "" -"Acceleration for travel moves (jumps between distant extrusion points).\n" -"Can be a % of the default acceleration\n" -"Set zero to use default acceleration for travel moves." +#: src/libslic3r/PrintConfig.cpp:2580 +msgid "Cap with perimeter flow" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:1089 -#Similar to me: Access via settings button in the top menu -# 13 changes: New layout, access via settings button in the top menu -# translation: Nové rozvržení, přístup přes tlačítko nastavení v horním menu -msgid "Access via settings button in the top menu" +#: src/libslic3r/PrintConfig.cpp:6198 +msgid "Casting" msgstr "" +#: ../../ui_layout/default/print.ui : l393 +msgid "Change the bridge type and the bridge overlap to compute the same extrusions as when the PrusaSlicer 'thick bridge' isn't selected.\nAs long as it's selected, it will modify them.\nUnselect it to deactivate this enforcement." +msgstr "" -#: src/libslic3r/PrintConfig.cpp:1433 -#, possible-c-format, possible-boost-format -msgid "" -"Activate this option to modify the flow to acknowledge that the nozzle is " -"round and the corners will have a round shape, and so change the flow to " -"realize that and avoid over-extrusion. 100% is activated, 0% is deactivated " -"and 50% is half-activated.\n" -"Note: At 100% this changes the flow by ~5% over a very small distance " -"(~nozzle diameter), so it shouldn't be noticeable unless you have a very big " -"nozzle and a very precise printer." +#: ../../ui_layout/default/print.ui : l4 +msgid "Change the perimeter extrusion widths to ensure that there is an exact number of perimeters for this wall thickness value. It won't put the perimeter width below the nozzle diameter, and up to double.\nNote that the value displayed is just a view of the current perimeter thickness, like the info text below. The number of perimeters used to compute this value is one loop, or the custom variable 'wall_thickness_lines' (advanced mode) if defined.\nIf the value is too low, it will revert the widths to the saved value.\nIf the value is set to 0, it will show 0." msgstr "" -#: src/libslic3r/PrintConfig.cpp:3180 -#, possible-c-format, possible-boost-format +#: src/slic3r/GUI/Preferences.cpp:921 +#Similar to me: Changing some options will trigger application restart.\nYou will lose the content of the platter. +# 1 changes: Changing some options will trigger application restart.\nYou will lose the content of the plater. +# translation: Změnou nastavení se aplikace restartuje.\nZtratíte objekty na tiskové podložce. +# 21 changes: Switching the language will trigger application restart.\nYou will lose content of the platter. +# translation: Přepnutí jazyka spustí restart aplikace.\nPřijdete o obsah talíře. +# 22 changes: Switching the language will trigger application restart.\nYou will lose content of the plater. +# translation: Přepnutím jazyka se aplikace restartuje.\nZtratíte obsah scény. msgid "" -"Add a M106 S255 (max speed for fan) for this amount of seconds before going " -"down to the desired speed to kick-start the cooling fan.\n" -"This value is used for a 0->100% speedup, it will go down if the delta is " -"lower.\n" -"Set to 0 to deactivate." +"Changing some options will trigger application restart.\n" +"You will lose the content of the platter." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1546 -msgid "" -"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " -"keeps adding perimeters until all overhangs are filled.\n" -"!! this is a very slow algorithm !!\n" -"If you use this setting, strongly consider also using overhangs_reverse." +#: src/slic3r/GUI/Preferences.cpp:716 +msgid "Check for problematic dynamic libraries" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1534 -#, possible-c-format, possible-boost-format +#: src/slic3r/GUI/Preferences.cpp:652 msgid "" -"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " -"keeps adding perimeters, until more than 70% of the loop immediately above " -"is supported.\n" -"If you succeed in triggering the algorithm behind this setting, please send " -"me a message. Personally, I think it's useless." +"Choose the gui package to use. It controls colors, settings layout, quick " +"settings, tags (simple/expert)." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1557 -msgid "" -"Add one perimeter every odd layer. With this, infill is taken into the " -"sandwich and you may be able to reduce drastically the infill/perimeter " -"overlap setting. " +#: src/libslic3r/PrintConfig.cpp:494 +#Similar to me: Client Certificate File +# 8 changes: Open CA certificate file +# translation: Otevřít soubor s certifikátem CA +msgid "Client Certificate File" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1264 -#Similar to me: Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers).\n!! solid_over_perimeters may erase these surfaces !! -# 54 changes: Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers). -# translation: Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn (vrchních a spodních plných vrstev). +#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:432 msgid "" -"Add solid infill near sloping surfaces to guarantee the vertical shell " -"thickness (top+bottom solid layers).\n" -"!! solid_over_perimeters may erase these surfaces !!" +"Client certificate file is optional. It is only needed if you use 2-way ssl." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2183 -msgid "" -"Add this angle each layer to the base angle for infill. May be useful for " -"art, or to be sure to hit every object's feature even with very low infill. " -"Still experimental, tell me what makes it useful, or the problems that arise " -"using it." +#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:418 +#Similar to me: Client certificate files (*.pfx, *.p12)|*.pfx;*.p12|All files|*.* +# 17 changes: Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.* +# translation: Soubory s certifikátem (*.crt, *.pem)|*.crt;*.pem|Všechny soubory|*.* +msgid "Client certificate files (*.pfx, *.p12)|*.pfx;*.p12|All files|*.*" msgstr "" -#: ../../ui_layout/default/print.ui -#Similar to me: advanced -# 1 changes: Advanced -# translation: Pokročilý -# 3 changes: Balanced -# translation: Vyvážené -msgid "advanced" -msgstr "" -#: ../../ui_layout/default/print.ui -msgid "Advanced Infill options" +#: src/slic3r/GUI/MainFrame.cpp:247 +#, possible-boost-format +#Similar to me: Closing %1% while some presets are modified. +# 11 changes: Closing PrusaSlicer while some presets are modified. +# translation: Zavírání PrusaSliceru. Některá přednastavení jsou změněná. +# 17 changes: Creating a new project while some presets are modified. +# translation: Vytváření nového projektu. Některá přednastavení jsou upravená. +msgid "Closing %1% while some presets are modified." msgstr "" -#: src/slic3r/GUI/Tab.cpp:3153 -msgid "Advanced wipe tower purge volume calculs" +#: src/slic3r/GUI/MainFrame.cpp:240 +#, possible-boost-format +#Similar to me: Closing %1%. Current project is modified. +# 11 changes: Closing PrusaSlicer. Current project is modified. +# translation: Zavírání PrusaSliceru. Aktuální projekt je upravený. +msgid "Closing %1%. Current project is modified." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2579 -#Similar to me: after last perimeter -# 6 changes: External perimeter -# translation: Vnější perimetr -# 7 changes: external perimeters -# translation: vnější perimetry -# 7 changes: External perimeters -# translation: Vnější perimetry -msgid "after last perimeter" +#: src/slic3r/GUI/Preferences.cpp:797 +msgid "Color template used by the icons on the platter." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2874 src/libslic3r/PrintConfig.cpp:5578 -msgid "Algorithm" +#: src/slic3r/Utils/OctoPrint.cpp:324 +#Similar to me: Could not connect to Monoprice lcd +# 10 changes: Could not connect to OctoPrint +# translation: Nelze se spojit s OctoPrintem +# 11 changes: Could not connect to Prusa SLA +# translation: Nelze se připojit k Prusa SLA +# 11 changes: Could not connect to Repetier +# translation: Nelze se připojit k Repetieru +msgid "Could not connect to Monoprice lcd" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5580 -msgid "" -"Algorithm for the advanced wipe.\n" -"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" -"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " -"volume_mult * (pigmentBefore-pigmentAfter)^3\n" -"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / " -"(0.5+pigmentAfter)" +#: src/slic3r/GUI/Plater.cpp:5635 +#Similar to me: Create a new project? +# 4 changes: Creating a new project +# translation: Vytváření nového projektu +# 6 changes: Start a new project +# translation: Vytvořit nový projekt +msgid "Create a new project?" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2636 -msgid "" -"All characters that are written here will be replaced by '_' when writing " -"the gcode file name.\n" -"If the first charater is '[' or '(', then this field will be considered as a " -"regexp (enter '[^a-zA-Z0-9]' to only use ascii char)." +#: src/slic3r/GUI/MainFrame.cpp:1975 +msgid "Create an mosaic-like tile with filament changes." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2582 +#: src/libslic3r/PrintConfig.cpp:496 +#Similar to me: Custom Client certificate file can be specified for 2-way ssl authentication, in p12/pfx format. If left blank, no client certificate is used. +# 56 changes: Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used. +# translation: Pro HTTPS připojení OctoPrintu lze zadat vlastní CA certifikát ve formátu crt/pem. Pokud zůstane pole prázdné, použije se výchozí úložiště certifikátů OS CA. msgid "" -"All gaps, between the last perimeter and the infill, which are thinner than " -"a perimeter will be filled by gapfill." +"Custom Client certificate file can be specified for 2-way ssl " +"authentication, in p12/pfx format. If left blank, no client certificate is " +"used." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4204 -#Similar to me: All surfaces -# 4 changes: All top surfaces -# translation: Všechny horní povrchy -msgid "All surfaces" +#: src/libslic3r/PrintConfig.cpp:5411 +msgid "Decelerate with target acceleration" msgstr "" -#: src/slic3r/GUI/ImGuiWrapper.cpp:1008 src/slic3r/GUI/Search.cpp:555 -#Similar to me: All tags -# 3 changes: All walls -# translation: Všechny stěny -msgid "All tags" +#: src/libslic3r/PrintConfig.cpp:1177 +#Similar to me: Default speed +# 4 changes: Default fan speed +# translation: Výchozí rychlost ventilátoru +# 5 changes: Default color +# translation: Výchozí barva +# 5 changes: Infill speed +# translation: Rychlost výplně +msgid "Default speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5133 -msgid "" -"Allow all perimeters to overlap, instead of just external ones.\n" -"100% means that perimeters can overlap completly on top of each other.\n" -"0% will deactivate this setting" +#: src/libslic3r/PrintConfig.cpp:6199 +msgid "Dental" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:558 src/libslic3r/PrintConfig.cpp:559 -msgid "Allow empty layers" +#: ../../ui_layout/default/extruder.ui : l40 +#Similar to me: Depth +# 2 changes: tenth +# translation: desátého +msgid "Depth" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3171 -msgid "Allow fan delay on overhangs" +#: src/libslic3r/PrintConfig.cpp:4355 +msgid "" +"Distance between skirt and object(s) ; or from the brim if using draft " +"shield or you set 'skirt_distance_from_brim'." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:322 src/slic3r/GUI/Preferences.cpp:326 -#, possible-boost-format -#Similar to me: Allow just a single %1% instance -# 11 changes: Allow just a single PrusaSlicer instance -# translation: Povolit pouze jednu instanci PrusaSliceru -msgid "Allow just a single %1% instance" +#: src/slic3r/GUI/Plater.cpp:5627 +#Similar to me: Erase all objects +# 6 changes: Deletes all objects +# translation: Smazat všechny objekty +# 6 changes: Label objects +# translation: Označování objektů +# 6 changes: Select all objects +# translation: Vybrat všechny objekty +msgid "Erase all objects" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1025 -msgid "Allow only one skirt loop" +#: src/slic3r/GUI/MainFrame.cpp:1731 +#Similar to me: Export &Plate +# 5 changes: Export &G-code +# translation: Exportovat &G-code +# 5 changes: Export G-code +# translation: Exportovat G-code +msgid "Export &Plate" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5122 -msgid "" -"Allow outermost perimeter to overlap itself to avoid the use of thin walls. " -"Note that flow isn't adjusted and so this will result in over-extruding and " -"undefined behavior.\n" -"100% means that perimeters can overlap completly on top of each other.\n" -"0% will deactivate this setting" +#: src/slic3r/GUI/MainFrame.cpp:1731 +msgid "Export current plate (options available in the dialog)" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5548 -#, possible-c-format, possible-boost-format -msgid "" -"Allow Slic3r to compute the purge volume via smart computations. Use the " -"pigment% of each filament and following parameters" +#: src/slic3r/GUI/Preferences.cpp:303 +msgid "Export headers with date and time" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5178 -msgid "" -"Allow the external perimeter to merge the thin walls in the path. You can " -"deactivate this if you are using thin walls as a custom support, to reduce " -"adhesion a little." +#: src/slic3r/GUI/Plater.cpp:6003 +#Similar to me: Export Platter: +# 6 changes: Exact pattern +# translation: Přesný vzor +# 6 changes: Support pattern +# translation: Vzor podpory +msgid "Export Platter:" msgstr "" -#: src/libslic3r/PrintConfig.cpp:825 -msgid "" -"Allow to create a brim over an island when it's inside a hole (or surrounded " -"by an object)." +#: src/libslic3r/PrintConfig.cpp:1469 +#Similar to me: External Perimeter acceleration +# 9 changes: Perimeter acceleration +# translation: Zrychlení Perimetru +# 11 changes: External perimeter first +# translation: Nejprve vnější perimetr +# 12 changes: External perimeter fan speed +# translation: Rychlost ventilátoru vnějšího perimetru +msgid "External Perimeter acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3215 -msgid "Also emit limits to G-code" +#: src/libslic3r/PrintConfig.cpp:1505 +#Similar to me: External perimeters in vase mode +# 3 changes: ExternalPerimeter in vase mode +# translation: Vnější perimetr v režimu vázy +# 10 changes: External perimeter fan speed +# translation: Rychlost ventilátoru vnějšího perimetru +# 10 changes: External perimeters speed +# translation: Rychlost vnějšího perimetru +msgid "External perimeters in vase mode" msgstr "" -#: ../../ui_layout/default/print.ui : l46 -#Similar to me: Also for all perimeters -# 9 changes: external perimeters -# translation: vnější perimetry -# 9 changes: External perimeters -# translation: Vnější perimetry -# 9 changes: Small perimeters -# translation: Malé perimetry -msgid "Also for all perimeters" + +#: src/slic3r/GUI/GCodeViewer.cpp:3453 +msgid "Extrusion section (mm³/mm)" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:346 -#Similar to me: Always ask for unsaved changes in presets, when: \n- Closing Slic3r while some presets are modified,\n- Loading a new project while some presets are modified -# 6 changes: Always ask for unsaved changes in presets, when: \n- Closing PrusaSlicer while some presets are modified,\n- Loading a new project while some presets are modified -# translation: Vždy se dotázat na neuložené změny přednastavení během: \n- zavírání PrusaSliceru, pokud došlo k úpravě některých přednastavení,\n- načítání nového projektu, pokud došlo k úpravě některých přednastavení. -# 45 changes: You will not be asked about the unsaved changes in presets the next time you: \n- Closing PrusaSlicer while some presets are modified,\n- Loading a new project while some presets are modified -# translation: Příště již nebudete dotázáni na neuložené změny během: \n- zavírání PrusaSliceru, pokud došlo k úpravě některých přednastavení,\n- načítání nového projektu, zatímco v přednastavení máte neuložené změny. -msgid "" -"Always ask for unsaved changes in presets, when: \n" -"- Closing Slic3r while some presets are modified,\n" -"- Loading a new project while some presets are modified" +#: src/libslic3r/GCode.cpp:789 +msgid "Extrusion type change G-code" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:337 -#Similar to me: Always ask for unsaved changes in project, when: \n- Closing Slic3r,\n- Loading or creating a new project -# 6 changes: Always ask for unsaved changes in project, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project -# translation: Vždy se dotázat na neuložené změny přednastavení během: \n- zavírání PrusaSliceru,\n- načítání nebo vytváření nového projektu. -# 37 changes: You will not be asked about it again, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project -# translation: Nebudete znovu dotázáni při:\n- zavření PrusaSliceru,\n- načítání nebo vytváření nového projektu. -# 40 changes: Always ask for unsaved changes in presets when selecting new preset or resetting a preset -# translation: Při výběru nového přednastavení nebo resetování přednastavení se vždy dotazovat na neuložené změny přednastavení +#: src/libslic3r/PrintConfig.cpp:1306 msgid "" -"Always ask for unsaved changes in project, when: \n" -"- Closing Slic3r,\n" -"- Loading or creating a new project" +"Fill pattern for bottom infill. This only affects the bottom visible layer, " +"and not its adjacent solid shells.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:360 -msgid "Always keep current preset changes on a new project" +#: src/libslic3r/PrintConfig.cpp:2235 +msgid "" +"Fill pattern for general low-density infill.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5939 -msgid "Amount of lift for travel." -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Anchor solid infill by X mm" +#: src/libslic3r/PrintConfig.cpp:1334 +#Similar to me: Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear in most cases. You can try ironing for translucent material. Rectilinear (filled) replaces zig-zag patterns by a single big line & is more efficient for filling little spaces.\nIf you want an 'aligned' pattern, set 90° to the fill angle increment setting. +# 80 changes: Fill pattern for solid (internal) infill. This only affects the solid not-visible layers. You should use rectilinear in most cases. You can try ironing for translucent material. Rectilinear (filled) replaces zig-zag patterns by a single big line & is more efficient for filling little spaces. +# translation: Vzor výplně pro pevnou (vnitřní) výplň. To ovlivní pouze těleso ne-viditelné vrstvy. Ve většině případů byste měli používat přímočaré. Můžete zkusit ironing pro průsvitný materiál. Přímé (plněné) nahrazuje cik-cak vzory na jedné velké linii a je efektivnější pro vyplnění malých míst. +msgid "" +"Fill pattern for solid (internal) infill. This only affects the solid not-" +"visible layers. You should use rectilinear in most cases. You can try " +"ironing for translucent material. Rectilinear (filled) replaces zig-zag " +"patterns by a single big line & is more efficient for filling little " +"spaces.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2890 -msgid "Anchored" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Angle -# 2 changes: Single -# translation: Jednoduché -msgid "Angle" +#: src/libslic3r/PrintConfig.cpp:1275 +msgid "" +"Fill pattern for top infill. This only affects the top visible layer, and " +"not its adjacent solid shells.\n" +"If you want an 'aligned' pattern, set 90° to the fill angle increment " +"setting." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4273 -msgid "Angle cost" +#: src/libslic3r/Print.cpp:836 +#, possible-c-format, possible-boost-format +#Similar to me: First layer height can't be lower than %s +# 5 changes: First layer height can't be greater than %s +# translation: Výška první vrstvy nemůže být větší než %s +# 5 changes: First layer height can't be thinner than %s +# translation: Výška první vrstvy nemůže být tenčí než %s +# 11 changes: Layer height can't be higher than %s +# translation: Výška vrstvy nemůže být vyšší než %s +msgid "First layer height can't be lower than %s" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:572 -msgid "Appearance" +#: src/slic3r/GUI/Tab.cpp:3028 +#Similar to me: Flat time compensation +# 7 changes: XY Size Compensation +# translation: Kompenzace XY rozměrů +# 8 changes: XY holes compensation +# translation: Kompenzace XY děr +msgid "Flat time compensation" msgstr "" -#: ../../ui_layout/default/print.ui -#Similar to me: Apply on -# 3 changes: Apply -# translation: Použít -msgid "Apply on" + +#: src/libslic3r/PrintConfig.cpp:6197 +msgid "Flexible" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:968 -msgid "Are you sure?" +#: src/slic3r/GUI/Preferences.cpp:506 +msgid "Focusing platter on mouse over" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1194 -msgid "Artwork model by" +#: src/libslic3r/PrintConfig.cpp:406 +#Similar to me: Format of G-code thumbnails +# 10 changes: G-code thumbnails +# translation: Náhledy G-codu +msgid "Format of G-code thumbnails" msgstr "" -#: src/slic3r/GUI/OpenGLManager.cpp:265 -#, possible-boost-format -#Similar to me: As a workaround, you may run %1% with a software rendered 3D graphics by running %2%.exe with the --sw-renderer parameter. -# 23 changes: As a workaround, you may run PrusaSlicer with a software rendered 3D graphics by running prusa-slicer.exe with the --sw-renderer parameter. -# translation: PrusaSlicer můžete spustit se softwarovým vykreslováním 3D grafiky pomocí spuštění programu prusa-slicer.exe s parametrem --sw-renderer. +#: src/libslic3r/PrintConfig.cpp:407 msgid "" -"As a workaround, you may run %1% with a software rendered 3D graphics by " -"running %2%.exe with the --sw-renderer parameter." +"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " +"QOI for low memory firmware" msgstr "" -#: src/slic3r/GUI/ConfigWizard.cpp:1286 src/slic3r/GUI/Preferences.cpp:280 -#, possible-boost-format -msgid "Associate .3mf files to %1%" +#: src/libslic3r/PrintConfig.cpp:2567 +#Similar to me: Gap fill acceleration +# 4 changes: Infill acceleration +# translation: Zrychlení výplně +# 7 changes: Default acceleration +# translation: Výchozí zrychlení +# 7 changes: Travel acceleration +# translation: Cestovní zrychlení +msgid "Gap fill acceleration" msgstr "" - -#: src/slic3r/GUI/Preferences.cpp:383 -#, possible-boost-format -msgid "Associate .gcode files to %1%" +#: ../../ui_layout/default/extruder.ui +msgid "General wipe" msgstr "" -#: src/slic3r/GUI/ConfigWizard.cpp:1287 src/slic3r/GUI/Preferences.cpp:287 -#, possible-boost-format -msgid "Associate .stl files to %1%" +#: src/slic3r/GUI/Preferences.cpp:785 +#Similar to me: Gui Colors +# 2 changes: Gui color +# translation: Upravit barvu +# 4 changes: Colors +# translation: Barvy +msgid "Gui Colors" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:62 -#, possible-boost-format -msgid "at %1%%% over all bridges" +#: src/libslic3r/PrintConfig.cpp:6200 +msgid "Heat-resistant" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:64 src/slic3r/GUI/PresetHints.cpp:104 -#, possible-boost-format -msgid "at %1%%% over bridges" +#: src/slic3r/GUI/Preferences.cpp:623 +msgid "Hide tooltips on slice buttons" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:52 src/slic3r/GUI/PresetHints.cpp:93 -#, possible-boost-format -msgid "at %1%%% over external perimeters" +#: src/libslic3r/PrintConfig.cpp:833 +#Similar to me: Horizontal width of the brim that will be printed around each object on the first layer.\nWhen raft is used, no brim is generated (use raft_first_layer_expansion). +# 7 changes: The horizontal width of the brim that will be printed around each object on the first layer. When raft is used, no brim is generated (use raft_first_layer_expansion). +# translation: Horizontální šířka límce, který bude vytištěn kolem každého objektu v první vrstvě. Při použití raftu se nevytvoří žádný límec (použijte raft_first_layer_expansion). +msgid "" +"Horizontal width of the brim that will be printed around each object on the " +"first layer.\n" +"When raft is used, no brim is generated (use raft_first_layer_expansion)." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:68 src/slic3r/GUI/PresetHints.cpp:70 -#: src/slic3r/GUI/PresetHints.cpp:109 -#, possible-boost-format -msgid "at %1%%% over infill bridges" +#: src/slic3r/GUI/Preferences.cpp:689 +msgid "Icon" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:58 src/slic3r/GUI/PresetHints.cpp:101 -#, possible-boost-format -msgid "at %1%%% over support interface surfaces" +#: src/slic3r/GUI/Preferences.cpp:508 +msgid "" +"If disabled, moving the mouse over the platter panel will not change the " +"focus but some shortcuts from the platter may not work. If enabled, moving " +"the mouse over the platter panel will move focus there, and away from the " +"current control." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:55 src/slic3r/GUI/PresetHints.cpp:98 -#, possible-boost-format -msgid "at %1%%% over top fill surfaces" +#: src/libslic3r/PrintConfig.cpp:2458 +#Similar to me: If expressed as absolute value in mm/s, this speed will be usedf as a max over all the print moves of the first object layer above raft interface, regardless of their type.\nIf expressed as a percentage it will scale the current speed (max 100%).\nSet it at 100% to remove this speed modification. +# 92 changes: If expressed as absolute value in mm/s, this speed will be applied to all the print moves of the first object layer above raft interface, regardless of their type. If expressed as a percentage (for example: 40%) it will scale the default speeds. +# translation: Pokud je vyjádřena jako absolutní hodnota v mm / s, bude tato rychlost použita pro všechny pohyby tisku první vrstvy nad raftem bez ohledu na jejich typ. Pokud je hodnota vyjádřena procenty (například: 40%), změní v závislosti na výchozích rychlostech. +# 110 changes: If expressed as absolute value in mm/s, this speed will be applied as a maximum to all the print moves (but infill) of the first layer.\nIf expressed as a percentage it will scale the current speed.\nSet it at 100% to remove any first layer speed modification (but for infill). +# translation: Pokud je vyjádřena jako absolutní hodnota v mm/s, bude tato rychlost použita jako maximálně na všechny tiskové pohyby (kromě výplně) první vrstvy.\nPokud je vyjádřeno v procentech, změní se aktuální rychlost.\nNastavte jej na 100 % abyste odstranili jakoukoli úpravu rychlosti první vrstvy (ale pro výplň). +msgid "" +"If expressed as absolute value in mm/s, this speed will be usedf as a max " +"over all the print moves of the first object layer above raft interface, " +"regardless of their type.\n" +"If expressed as a percentage it will scale the current speed (max 100%).\n" +"Set it at 100% to remove this speed modification." msgstr "" -#: ../../ui_layout/default/extruder.ui : l39 -msgid "At end" -msgstr "" -#: ../../ui_layout/default/extruder.ui : l38 -msgid "At start" +#: src/libslic3r/PrintConfig.cpp:5414 +msgid "" +"If selected, the deceleration of a travel will use the acceleration value of " +"the extrusion that will be printed after it (if any) " msgstr "" -#: src/slic3r/GUI/Field.cpp:611 +#: src/slic3r/GUI/Preferences.cpp:305 msgid "" -"Auto Speed will try to maintain a constant flow rate accross all print " -"moves.\n" -"It is not recommended to include gap moves to the Auto Speed calculation(by " -"setting this value to 0).\n" -"Very thin gap extrusions will often not max out the flow rate of your " -"printer.\n" -"As a result, this will cause Auto Speed to lower the speeds of all other " -"print moves to match the low flow rate of these thin gaps." +"If this is enabled, Slic3r will add the date of the export to the first line " +"of any exported config and gcode file. Note that some software may rely on " +"that to work, be careful and report any problem if you deactivate it." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5579 -msgid "Auto-wipe algorithm" +#: src/slic3r/GUI/Preferences.cpp:812 +#, possible-c-format, possible-boost-format +msgid "" +"If you use a color with higher than 80% saturation and/or value, these will " +"be increased. If lower, they will be decreased." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5570 -#Similar to me: Auto-wipe multiplier -# 7 changes: Extrusion multiplier -# translation: Násobič extruze -msgid "Auto-wipe multiplier" +#: src/slic3r/GUI/Plater.cpp:5960 +msgid "Include modifiers" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2886 -msgid "Automatic" +#: src/slic3r/GUI/Plater.cpp:5961 +#Similar to me: Include presets +# 6 changes: Compare presets +# translation: Porovnání přednastavení +msgid "Include presets" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2888 -msgid "Automatic, only for small areas" +#: src/slic3r/GUI/Plater.cpp:5958 +#Similar to me: Include supports +# 5 changes: Enforce supports +# translation: Vynucení podpěr +# 6 changes: Add supports +# translation: Přidání podpěr +# 6 changes: Block supports +# translation: Blokování podpěr +msgid "Include supports" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2889 -msgid "Automatic, or anchored if too big" +#: src/libslic3r/PrintConfig.cpp:669 +#Similar to me: Internal bridges acceleration +# 11 changes: Bridge acceleration +# translation: Zrychlení mostu +# 11 changes: Internal bridge speed +# translation: Vnitřní rychlost mostu +msgid "Internal bridges acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2887 -msgid "Automatic, unless full" +#: src/libslic3r/PrintConfig.cpp:3793 +#Similar to me: Internal Perimeter acceleration +# 9 changes: Perimeter acceleration +# translation: Zrychlení Perimetru +# 12 changes: Internal perimeters speed +# translation: Rychlost vnitřních perimetrů +msgid "Internal Perimeter acceleration" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:181 -#Similar to me: Automation -# 4 changes: Duration -# translation: Doba trvání -# 4 changes: Information -# translation: Informace -# 4 changes: Rotation -# translation: Otáčení -msgid "Automation" +#: src/libslic3r/PrintConfig.cpp:3035 +#Similar to me: Ironing acceleration +# 5 changes: Bridge acceleration +# translation: Zrychlení mostu +# 5 changes: Infill acceleration +# translation: Zrychlení výplně +# 6 changes: Travel acceleration +# translation: Cestovní zrychlení +msgid "Ironing acceleration" msgstr "" -#: src/slic3r/GUI/Tab.cpp:4918 -#Similar to me: BACK ARROW icon indicates that the values this widget control were changed and at least one is not equal to the last saved preset.\nClick to reset current all values to the last saved preset. -# 42 changes: BACK ARROW icon indicates that the value was changed and is not equal to the last saved preset.\nClick to reset current value to the last saved preset. -# translation: Ikona ŠIPKY ZPĚT indikuje, že se hodnota změnila a není shodná s naposledy uloženým přednastavením.\nKlikněte pro reset současné hodnoty na naposledy uložené přednastavení. +#: src/libslic3r/PrintConfig.cpp:3094 +#Similar to me: Ironing speed. Used for the ironing pass of the ironing infill pattern, and the post-process infill.\nThis can be expressed as a percentage (for example: 80%) over the Top Solid Infill speed.\nIroning extrusions are ignored from the automatic volumetric speed computation. +# 44 changes: Ironing speed. Used for the ironing pass of the ironing infill pattern, and the post-process infill. Can be defined as mm.s, or a % of the top solid infill speed.\nIroning extrusions are ignored from the automatic volumetric speed computation. +# translation: Rychlost ironing. Používá se pro ironing průchod vzoru ironing výplně a výplň po zpracování. Může být definována jako mm.s nebo % horního tělesa rychlost výplně.\nVýlisky na ironing jsou ignorovány z automatické objemové rychlosti výpočet. msgid "" -"BACK ARROW icon indicates that the values this widget control were changed " -"and at least one is not equal to the last saved preset.\n" -"Click to reset current all values to the last saved preset." +"Ironing speed. Used for the ironing pass of the ironing infill pattern, and " +"the post-process infill.\n" +"This can be expressed as a percentage (for example: 80%) over the Top Solid " +"Infill speed.\n" +"Ironing extrusions are ignored from the automatic volumetric speed " +"computation." msgstr "" -#: src/libslic3r/PrintConfig.cpp:426 -#Similar to me: Base Layer height -# 5 changes: First layer height -# translation: Výška první vrstvy -# 5 changes: Layer height -# translation: Výška vrstvy -msgid "Base Layer height" +#: src/slic3r/GUI/Preferences.cpp:826 +msgid "" +"It can be a good idea to use a bit darker color, as some hues can be a bit " +"difficult to read." msgstr "" -#: src/libslic3r/PrintConfig.cpp:399 -#Similar to me: Bed on thumbnail -# 6 changes: Change thumbnail -# translation: Změnit náhled -msgid "Bed on thumbnail" +#: src/slic3r/GUI/Preferences.cpp:798 +msgid "" +"It may need a lighter color, as it's used to replace white on top of a dark " +"background." msgstr "" -#: src/libslic3r/PrintConfig.cpp:597 -#Similar to me: Bed temperature for layers after the first one. Set zero to disable bed temperature control commands in the output. -# 8 changes: Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output. -# translation: Teplota tiskové podložky pro další vrstvy po první vrstvě. Nastavením na hodnotu nula vypnete ovládací příkazy teploty tiskové podložky ve výstupu. -# 25 changes: Nozzle temperature for layers after the first one. Set this to zero to disable temperature control commands in the output G-code. -# translation: Teplota trysky od druhé vrstvy dále. Nastavte tuto hodnotu na nulu, abyste zakázali příkazy pro řízení teploty ve výstupním G-codu. -# 38 changes: Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output. -# translation: Teplota vyhřívané tiskové podložky pro první vrstvu. Nastavením tuto hodnoty na nulu vypnete příkazy pro řízení teploty ve vrstvě ve výstupu. -msgid "" -"Bed temperature for layers after the first one. Set zero to disable bed " -"temperature control commands in the output." +#: src/libslic3r/PrintConfig.cpp:737 +msgid "Keep current flow" msgstr "" - -#: src/slic3r/GUI/MainFrame.cpp:1951 -msgid "Bed/Extruder leveling" +#: ../../ui_layout/default/print.ui +msgid "Layer count" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5473 -msgid "" -"Before extruding an external perimeter, this flag will place the nozzle a " -"bit inward and in advance of the seam position before unretracting. It will " -"then move to the seam position before extruding." +#: src/libslic3r/Print.cpp:855 +#, possible-c-format, possible-boost-format +#Similar to me: Layer height can't be lower than %s +# 4 changes: Layer height can't be higher than %s +# translation: Výška vrstvy nemůže být vyšší než %s +# 5 changes: Layer height can't be greater than %s +# translation: Výška vrstvy nemůže být větší než %s +# 12 changes: First layer height can't be greater than %s +# translation: Výška první vrstvy nemůže být větší než %s +msgid "Layer height can't be lower than %s" msgstr "" -#: ../../ui_layout/default/filament.ui -msgid "Behavior" + +#: src/slic3r/GUI/Tab.cpp:4915 +#Similar to me: LOCKED LOCK icon indicates that the values this widget control are all the same as the system (or default) values. +# 27 changes: LOCKED LOCK icon indicates that the value is the same as the system (or default) value. +# translation: Ikona ZAMKNUTÉHO ZÁMKU indikuje, že hodnota je shodná se systémovou (výchozí) hodnotou. +msgid "" +"LOCKED LOCK icon indicates that the values this widget control are all the " +"same as the system (or default) values." msgstr "" -#: src/libslic3r/PrintConfig.cpp:3790 -msgid "Better bonding" +#: src/libslic3r/PrintConfig.cpp:3161 +msgid "M73 & M117" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:106 -#, possible-boost-format -msgid "between %1%%% %2%%% over bridges" +#: src/slic3r/GUI/Preferences.cpp:811 +msgid "Main color template." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:95 -#, possible-boost-format -msgid "between %1%%% %2%%% over external perimeters" +#: src/slic3r/GUI/Preferences.cpp:809 +msgid "Main Gui color template" msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:111 -#, possible-boost-format -msgid "between %1%%% %2%%% over infill bridges" +#: src/libslic3r/PrintConfig.cpp:3400 +#Similar to me: Max print speed for Autospeed +# 9 changes: Volumetric speed for Autospeed +# translation: Objemová rychlost pro Automatickou rychlost +msgid "Max print speed for Autospeed" msgstr "" -#: ../../ui_layout/default/printer_fff.ui -msgid "Between extrusion role change G-code" -msgstr "" -#: ../../ui_layout/default/printer_fff.ui : l45 -msgid "Big" +#: src/libslic3r/PrintConfig.cpp:2456 +#Similar to me: Max speed of object first layer over raft interface +# 5 changes: Speed of object first layer over raft interface +# translation: Rychlost první vrstvy objektu nad raftem +# 17 changes: First object layer over raft interface +# translation: První vrstva objektu nad raftem +msgid "Max speed of object first layer over raft interface" msgstr "" -#: src/slic3r/GUI/SysInfoDialog.cpp:150 -#, possible-boost-format -#Similar to me: Blacklisted libraries loaded into %1% process: -# 11 changes: Blacklisted libraries loaded into PrusaSlicer process: -# translation: Blacklistované knihovny byly načteny do procesu PrusaSlicer: -msgid "Blacklisted libraries loaded into %1% process:" +#: src/libslic3r/PrintConfig.cpp:5506 +msgid "Max Wipe deviation" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:654 -#Similar to me: Bridge acceleration -# 7 changes: Bridge flow ratio -# translation: Poměr průtoku při vytváření mostů -# 7 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Bridge acceleration" +#: ../../ui_layout/default/print.ui : l280 +#Similar to me: maximum speed +# 5 changes: Max fan speed +# translation: Max rychlost ventilátoru +# 5 changes: Max speed +# translation: Max rychlost +msgid "maximum speed" msgstr "" -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:57 -#Similar to me: Bridge calibration -# 6 changes: Bridge flow ratio -# translation: Poměr průtoku při vytváření mostů -msgid "Bridge calibration" +#: src/libslic3r/PrintConfig.cpp:5507 +msgid "Maximum Wipe deviation to the inside" msgstr "" -#: ../../ui_layout/default/print.ui : l58 -msgid "Bridge flow" + +#: src/libslic3r/GCode.cpp:818 +#Similar to me: Milling End G-code +# 5 changes: Filament End G-code +# translation: Filament Konec G-code +# 6 changes: Filament end G-code +# translation: G-Code konce vlákna +msgid "Milling End G-code" msgstr "" -#: src/libslic3r/PrintConfig.cpp:720 -#Similar to me: Bridge flow baseline -# 6 changes: Bridge flow ratio -# translation: Poměr průtoku při vytváření mostů -msgid "Bridge flow baseline" +#: src/libslic3r/GCode.cpp:811 +#Similar to me: Milling Start G-code +# 5 changes: Filament Start G-code +# translation: Filament Začátek G-code +# 6 changes: Filament start G-code +# translation: G-Code startu vlákna +# 8 changes: Start G-code +# translation: Začátek G-code +msgid "Milling Start G-code" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1961 -#Similar to me: Bridge flow calibration -# 6 changes: Bridge flow ratio -# translation: Poměr průtoku při vytváření mostů -msgid "Bridge flow calibration" +#: src/libslic3r/PrintConfig.cpp:2601 +msgid "Min surface for gap filling" msgstr "" -#: ../../ui_layout/default/print.ui -#Similar to me: Bridge lines density -# 8 changes: First layer density -# translation: Hustota první vrstvy -msgid "Bridge lines density" + +#: src/libslic3r/PrintConfig.cpp:6755 +msgid "Minimum resolution in nanometers" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1384 -msgid "Bridge margin" +#: src/libslic3r/PrintConfig.cpp:3708 +#, possible-c-format, possible-boost-format +#Similar to me: Minimum unsupported width for an extrusion to apply the bridge fan & overhang speed to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate overhangs. +# 10 changes: Minimum unsupported width for an extrusion to apply the bridge fan & overhang speed to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Minimální nepodporovaná šířka pro vytlačování pro použití mostového ventilátoru & rychlost přesahu k tomuto přesahu. Může být v mm nebo v % trysky průměr. Pro deaktivaci nastavte na 0. +# 28 changes: Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Minimální nepodporovaná šířka pro vytlačování pro aplikaci mostního toku na totopřesah. Může být v mm nebo v % průměru trysky. Nastavte na 0 až deaktivovat. +msgid "" +"Minimum unsupported width for an extrusion to apply the bridge fan & " +"overhang speed to this overhang. Can be in mm or in a % of the nozzle " +"diameter. Set to 0 to deactivate overhangs." msgstr "" -#: src/libslic3r/PrintConfig.cpp:798 -#Similar to me: Bridge speed -# 4 changes: Print speed -# translation: Rychlost tisku -msgid "Bridge speed" +#: src/libslic3r/PrintConfig.cpp:3720 +#, possible-c-format, possible-boost-format +#Similar to me: Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate bridge flow for overhangs. +# 26 changes: Minimum unsupported width for an extrusion to apply the bridge flow to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Minimální nepodporovaná šířka pro vytlačování pro aplikaci mostního toku na totopřesah. Může být v mm nebo v % průměru trysky. Nastavte na 0 až deaktivovat. +# 44 changes: Minimum unsupported width for an extrusion to apply the bridge fan & overhang speed to this overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to deactivate. +# translation: Minimální nepodporovaná šířka pro vytlačování pro použití mostového ventilátoru & rychlost přesahu k tomuto přesahu. Může být v mm nebo v % trysky průměr. Pro deaktivaci nastavte na 0. +msgid "" +"Minimum unsupported width for an extrusion to apply the bridge flow to this " +"overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to " +"deactivate bridge flow for overhangs." msgstr "" -#: ../../ui_layout/default/print.ui : l57 -msgid "Bridge speed and fan" -msgstr "" -#: ../../ui_layout/default/print.ui -#Similar to me: Bridge type -# 3 changes: Brim type -# translation: Typ límce -# 4 changes: Printer type -# translation: Typ tiskárny -# 4 changes: Change type -# translation: Změnit typ -msgid "Bridge type" +#: src/libslic3r/PrintConfig.cpp:1182 +msgid "mm/s for %-based speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1383 -#Similar to me: Bridged -# 1 changes: Bridge -# translation: Most -# 1 changes: Bridges -# translation: Mosty -msgid "Bridged" +#: src/slic3r/GUI/MainFrame.cpp:1975 +msgid "Mosaic from picture" msgstr "" -#: src/libslic3r/PrintConfig.cpp:681 -#Similar to me: Bridging -# 3 changes: Bridge -# translation: Most -# 3 changes: Bridges -# translation: Mosty -# 3 changes: Origin -# translation: Počátek -msgid "Bridging" +#: src/slic3r/GUI/GUI.cpp:350 +#, possible-boost-format +#Similar to me: Most likely the configuration was produced by a newer version of %1% or PrusaSlicer. +# 19 changes: Most likely the configuration was produced by a newer version of +# translation: S největší pravděpodobností byla konfigurace vytvořena novější verzí +# 24 changes: Most likely the configuration was produced by a newer version of PrusaSlicer or by some PrusaSlicer fork. +# translation: Konfiguraci pravděpodobně vytvořila novější verze programu PrusaSlicer nebo nějaký fork PrusaSliceru. +msgid "" +"Most likely the configuration was produced by a newer version of %1% or " +"PrusaSlicer." msgstr "" -#: src/libslic3r/PrintConfig.cpp:868 src/libslic3r/PrintConfig.cpp:918 -msgid "Brim & Skirt" +#: src/libslic3r/PrintConfig.cpp:4221 +msgid "Not on top" msgstr "" -#: src/libslic3r/PrintConfig.cpp:869 -msgid "Brim & Skirt acceleration" +#: src/libslic3r/PrintConfig.cpp:910 +#Similar to me: Offset of brim from the printed object. Should be kept at 0 unless you encounter great difficulties to separate them.\nIt's subtracted to brim_width and brim_width_interior, so it has to be lower than them. The offset is applied after the first layer XY compensation (elephant foot). +# 108 changes: Distance between the brim and the part. Should be kept at 0 unless you encounter great difficulties to separate them. It's subtracted to brim_width and brim_width_interior, so it has to be lower than them +# translation: Vzdálenost mezi okrajem a částí. Měla by být udržována na 0, pokud čelit velkým potížím při jejich oddělení. Odečítá se to od šířky okrajea brim_width_interior, takže musí být nižší než oni +msgid "" +"Offset of brim from the printed object. Should be kept at 0 unless you " +"encounter great difficulties to separate them.\n" +"It's subtracted to brim_width and brim_width_interior, so it has to be lower " +"than them. The offset is applied after the first layer XY compensation " +"(elephant foot)." msgstr "" -#: src/libslic3r/PrintConfig.cpp:919 -msgid "Brim & Skirt speed" +#: src/libslic3r/PrintConfig.cpp:4222 +msgid "Only on top" msgstr "" -#: src/slic3r/GUI/ConfigManipulation.cpp:228 -#Similar to me: Brim configuration -# 6 changes: &Configuration -# translation: &Konfigurace -# 6 changes: Loading configuration -# translation: Načítání konfigurace -msgid "Brim configuration" +#: src/slic3r/GUI/Plater.cpp:5959 +#Similar to me: Only selected objects +# 7 changes: Delete Selected Objects +# translation: Odstranit vybrané objekty +msgid "Only selected objects" msgstr "" -#: src/libslic3r/PrintConfig.cpp:883 -msgid "Brim ear detection length" +#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:419 +#Similar to me: Open Client certificate file +# 5 changes: Open CA certificate file +# translation: Otevřít soubor s certifikátem CA +msgid "Open Client certificate file" msgstr "" -#: src/libslic3r/PrintConfig.cpp:858 -msgid "Brim ear max angle" +#: src/slic3r/GUI/Plater.cpp:1116 +#Similar to me: Option tags: +# 4 changes: Options: +# translation: Možnosti: +msgid "Option tags:" msgstr "" -#: src/libslic3r/PrintConfig.cpp:849 src/libslic3r/PrintConfig.cpp:850 -msgid "Brim ears" +#: src/slic3r/GUI/Plater.cpp:1128 +msgid "Option use another tags than the current mode." msgstr "" +#: ../../ui_layout/default/print.ui +msgid "Other extrusions acceleration" +msgstr "" -#: src/libslic3r/PrintConfig.cpp:822 src/libslic3r/PrintConfig.cpp:823 -msgid "Brim inside holes" +#: ../../ui_layout/default/print.ui +#Similar to me: Other speed +# 4 changes: Wipe speed +# translation: Rychlost očištění +msgid "Other speed" msgstr "" -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: build volume -# 4 changes: build %lu -# translation: sestavení %lu -msgid "build volume" +#: ../../ui_layout/default/printer_sla.ui +#Similar to me: Output +# 2 changes: Outset +# translation: Návrší +msgid "Output" msgstr "" +#: ../../ui_layout/default/print.ui : l295 +msgid "Over raft" +msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1809 -#, possible-c-format, possible-boost-format -#Similar to me: But since this version of %s we don't show this information in Printer Settings anymore.\nSettings will be available in physical printers settings. -# 10 changes: But since this version of PrusaSlicer we don't show this information in Printer Settings anymore.\nSettings will be available in physical printers settings. -# translation: Ale od této verze PrusaSliceru již nebudeme tyto informace zobrazovat v Nastavení tiskárny.\nNastavení bude k dispozici v nastavení fyzických tiskáren. -msgid "" -"But since this version of %s we don't show this information in Printer " -"Settings anymore.\n" -"Settings will be available in physical printers settings." + +#: src/libslic3r/PrintConfig.cpp:3679 +#Similar to me: Overhang acceleration +# 7 changes: Bridge acceleration +# translation: Zrychlení mostu +# 7 changes: Default acceleration +# translation: Výchozí zrychlení +# 7 changes: Travel acceleration +# translation: Cestovní zrychlení +msgid "Overhang acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5493 +#: src/libslic3r/PrintConfig.cpp:5016 #, possible-c-format, possible-boost-format msgid "" -"By how much the 'wipe inside' can dive inside the object (if possible)?\n" -"In % of the perimeter width.\n" -"Note: don't put a value higher than 50% if you have only one perimeter, or " -"150% for two perimeter, etc... or it will ooze instead of wipe." +"Pattern for interface layers.\n" +"Note that 'Hilbert', 'Ironing' and '(filled)' patterns are meant to be used " +"with soluble supports and 100% fill interface layer." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:392 +#: src/libslic3r/PrintConfig.cpp:2547 #, possible-c-format, possible-boost-format +#Similar to me: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall.\nCan be a % of the nozzle diameter. +# 36 changes: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall. +# translation: Perimetry se rozdělí na více segmentů vložením bodů členitého povrchu. Snížením vzdálenosti bodů členitého povrchu se zvýší počet náhodně posunutých bodů na obvodové stěně. msgid "" -"by the print profile maximum volumetric rate of %3.2f mm³/s at filament " -"speed %3.2f mm/s." +"Perimeters will be split into multiple segments by inserting Fuzzy skin " +"points. Lowering the Fuzzy skin point distance will increase the number of " +"randomly offset points on the perimeter wall.\n" +"Can be a % of the nozzle diameter." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1996 -msgid "C&alibration" +#: src/slic3r/GUI/Preferences.cpp:795 +msgid "Platter icons Color template" msgstr "" -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:61 -#: src/slic3r/GUI/MainFrame.cpp:1966 -msgid "Calibration cube" +#: src/libslic3r/PrintConfig.cpp:4273 +msgid "" +"Position of perimeters' starting points.\n" +"Cost-based option let you choose the angle and travel cost. A high angle " +"cost will place the seam where it can be hidden by a corner, the travel cost " +"place the seam near the last position (often at the end of the previous " +"infill)." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:1901 -msgid "" -"Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily " -"needed" +#: ../../ui_layout/default/print.ui : l72 +msgid "Position of perimeters' starting points.\nCustom can be defined in Advanced or Expert mode. Cost-based settings let you choose the angle and travel cost. A high angle cost will place the seam where it can be hidden by a corner, the travel cost place the seam near the last position (often at the end of the previous infill)." msgstr "" -#: src/slic3r/GUI/ConfigWizard.cpp:152 -#, possible-boost-format -msgid "Can't open directory '%1%'. Config bundles from here can't be loaded." +#: src/libslic3r/PrintConfig.cpp:5789 +#Similar to me: Preferred orientation +# 8 changes: Optimize orientation +# translation: Optimalizovat orientaci +msgid "Preferred orientation" msgstr "" -#: src/slic3r/Utils/Repetier.cpp:68 src/slic3r/Utils/Repetier.cpp:72 -#, possible-c-format, possible-boost-format -msgid "Can't process the repetier return message: missing field '%s'" +#: src/libslic3r/PrintConfig.cpp:4036 +#Similar to me: Raft first layer density +# 6 changes: First layer density +# translation: Hustota první vrstvy +msgid "Raft first layer density" msgstr "" -#: src/libslic3r/PrintConfig.cpp:6182 -msgid "Casting" +#: src/libslic3r/PrintConfig.cpp:4047 +#Similar to me: Raft first layer expansion +# 6 changes: First layer expansion +# translation: Rozšíření první vrstvy +msgid "Raft first layer expansion" msgstr "" -#: src/libslic3r/PrintConfig.cpp:949 -msgid "Chamber" +#: src/libslic3r/PrintConfig.cpp:5791 +msgid "Rotate stl around z axes while adding them to the bed." msgstr "" -#: src/libslic3r/PrintConfig.cpp:950 -#Similar to me: Chamber temperature -# 6 changes: Bed temperature -# translation: Teplota tiskové podložky -# 6 changes: Nozzle temperature -# translation: Teplota trysky -msgid "Chamber temperature" +#: src/slic3r/GUI/GUI_Preview.cpp:257 +#Similar to me: Section +# 1 changes: Sections +# translation: Sekce +# 2 changes: Action +# translation: Akce +# 2 changes: Selection +# translation: Výběr +msgid "Section" msgstr "" -#: src/libslic3r/PrintConfig.cpp:952 -msgid "" -"Chamber temperature. Note that this setting doesn't do anything, but you can " -"access it in Start G-code, Tool change G-code and the other ones, like for " -"other temperature settings." +#: src/slic3r/GUI/Preferences.cpp:646 +msgid "Settings layout and colors" msgstr "" -#: ../../ui_layout/default/print.ui : l391 -msgid "Change the bridge type and the bridge overlap to compute the same extrusions as when the PrusaSlicer 'thick bridge' isn't selected.\nAs long as it's selected, it will modify them.\nUnselect it to deactivate this enforcement." +#: ../../ui_layout/default/print.ui : l56 +msgid "Simple widget to enable/disable the overhangs detection (using 55% and 75% for the two thresholds)\nUse the expert mode to get more detailled widgets" msgstr "" -#: ../../ui_layout/default/print.ui : l4 -msgid "Change the perimeter extrusion width to ensure that there is an exact number of perimeters for this wall value. It won't put the width below the nozzle diameter, and up to double the size of the nozzle." +#: ../../ui_layout/default/print.ui : l393 +msgid "Simulate Prusa 'no thick bridge'" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:902 -#Similar to me: Changing some options will trigger application restart.\nYou will lose the content of the platter. -# 1 changes: Changing some options will trigger application restart.\nYou will lose the content of the plater. -# translation: Změnou nastavení se aplikace restartuje.\nZtratíte objekty na tiskové podložce. -# 22 changes: Switching the language will trigger application restart.\nYou will lose content of the plater. -# translation: Přepnutím jazyka se aplikace restartuje.\nZtratíte obsah scény. +#: src/slic3r/GUI/Preferences.cpp:592 +#, possible-c-format, possible-boost-format msgid "" -"Changing some options will trigger application restart.\n" -"You will lose the content of the platter." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:461 -msgid "Check for problematic dynamic libraries" +"Size of the font, and most of the gui (but not the menu and dialog ones). " +"Set to 0 to let the Operating System decide.\n" +"Please don't set this preference unless your OS scaling factor doesn't " +"works. Set 10 for 100% scaling, and 20 for 200% scaling." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2699 -msgid "Choose how many digits after the dot for extruder moves." +#: src/libslic3r/PrintConfig.cpp:6754 +msgid "SLA output precision" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2692 -msgid "Choose how many digits after the dot for xyz coordinates." +#: src/libslic3r/PrintConfig.cpp:3581 +#Similar to me: Slic3r can upload G-code files to a printer host. This field must contain the kind of the host.\nPrusaLink is only available for prusa printer. +# 48 changes: Slic3r can upload G-code files to a printer host. This field must contain the kind of the host. +# translation: Slic3r může nahrát soubory G-code do tiskového serveru. Toto pole musí obsahovat druh tiskového serveru. +# 55 changes: Slic3r can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication. +# translation: Slic3r může nahrát soubory do tiskového serveru. Toto pole by mělo obsahovat klíč API požadovaný pro ověření. +msgid "" +"Slic3r can upload G-code files to a printer host. This field must contain " +"the kind of the host.\n" +"PrusaLink is only available for prusa printer." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:1124 -msgid "Choose how the windows are selectable and displayed:" +#: src/slic3r/Config/Snapshot.cpp:600 +msgid "Slic3r error" msgstr "" -#: src/slic3r/GUI/FreeCADDialog.cpp:307 src/slic3r/GUI/FreeCADDialog.cpp:347 -#Similar to me: Choose one file (py): -# 7 changes: Choose one file (3MF/AMF): -# translation: Vyberte jeden soubor (3MF/AMF): -# 8 changes: Choose one PNG file: -# translation: Vyberte jeden PNG soubor: -msgid "Choose one file (py):" +#: src/slic3r/Config/Snapshot.cpp:599 +#Similar to me: Slic3r has encountered an error while taking a configuration snapshot. +# 6 changes: PrusaSlicer has encountered an error while taking a configuration snapshot. +# translation: PrusaSlicer narazil na chybu při pořizování zálohy konfigurace. +msgid "Slic3r has encountered an error while taking a configuration snapshot." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:692 +#: src/slic3r/GUI/Preferences.cpp:827 +#Similar to me: Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): 275cad +# 11 changes: Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): 2172eb +# translation: Slic3r (žlutá): cabe39, PrusaSlicer (oranžová): ed6b21, SuperSlicer (modrá): 2172eb +# 15 changes: Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): 428dfd +# translation: Slic3r (žlutá): eddc21, PrusaSlicer (oranžová): fd7e42, SuperSlicer (modrá): 428dfd +# 16 changes: Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): 0047c7 +# translation: Slic3r (žlutý): ada230, PrusaSlicer (oranžový): c46737, SuperSlicer (modrý): 0047c7 msgid "" -"Choose the gui package to use. It controls colors, settings layout, quick " -"settings, tags (simple/expert)." +"Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " +"275cad" msgstr "" -#: src/slic3r/GUI/Preferences.cpp:420 -msgid "Choose the image to use as splashscreen" +#: src/slic3r/GUI/Preferences.cpp:813 +#Similar to me: Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): 296acc +# 11 changes: Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): 2172eb +# translation: Slic3r (žlutá): cabe39, PrusaSlicer (oranžová): ed6b21, SuperSlicer (modrá): 2172eb +# 15 changes: Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): 0047c7 +# translation: Slic3r (žlutý): ada230, PrusaSlicer (oranžový): c46737, SuperSlicer (modrý): 0047c7 +# 16 changes: Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): 428dfd +# translation: Slic3r (žlutá): eddc21, PrusaSlicer (oranžová): fd7e42, SuperSlicer (modrá): 428dfd +msgid "" +"Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " +"296acc" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2877 +#: src/slic3r/GUI/Preferences.cpp:799 +#Similar to me: Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): 3d83ed +# 11 changes: Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): 2172eb +# translation: Slic3r (žlutá): cabe39, PrusaSlicer (oranžová): ed6b21, SuperSlicer (modrá): 2172eb +# 14 changes: Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): 428dfd +# translation: Slic3r (žlutá): eddc21, PrusaSlicer (oranžová): fd7e42, SuperSlicer (modrá): 428dfd +# 16 changes: Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): 0047c7 +# translation: Slic3r (žlutý): ada230, PrusaSlicer (oranžový): c46737, SuperSlicer (modrý): 0047c7 msgid "" -"Choose the way the dense layer is laid out. The automatic option lets it try " -"to draw the smallest surface with only strait lines inside the sparse " -"infill. The Anchored option just slightly enlarges (by 'Default infill " -"margin') the surfaces that need a better support." +"Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " +"3d83ed" msgstr "" -#: src/slic3r/GUI/GUI_Preview.cpp:255 -msgid "Chrono" +#: src/libslic3r/PrintConfig.cpp:4698 +#Similar to me: Solid acceleration +# 5 changes: Bridge acceleration +# translation: Zrychlení mostu +# 5 changes: Infill acceleration +# translation: Zrychlení výplně +# 6 changes: Travel acceleration +# translation: Cestovní zrychlení +msgid "Solid acceleration" msgstr "" -#: src/slic3r/GUI/GCodeViewer.cpp:3451 src/slic3r/GUI/GUI_Preview.cpp:255 -msgid "Chronology" +#: src/libslic3r/PrintConfig.cpp:4483 +#Similar to me: Solid fill overlap +# 5 changes: Gap fill overlap +# translation: Překrytí výplně mezery +# 6 changes: Solid infill every +# translation: Plná výplň každou +# 6 changes: Thin wall overlap +# translation: Překrytí tenké stěny +msgid "Solid fill overlap" msgstr "" -#: src/libslic3r/PrintConfig.cpp:493 -#Similar to me: Client Certificate File -# 8 changes: Open CA certificate file -# translation: Otevřít soubor s certifikátem CA -msgid "Client Certificate File" +#: src/libslic3r/PrintConfig.cpp:1332 +#Similar to me: Solid fill pattern +# 4 changes: Top fill pattern +# translation: Vzor výplně horní vrstvy +# 5 changes: Bottom fill pattern +# translation: Vzor spodní výplně +# 5 changes: Solid pattern +# translation: Plný vzor +msgid "Solid fill pattern" msgstr "" -#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:432 +#: src/slic3r/GUI/Preferences.cpp:718 msgid "" -"Client certificate file is optional. It is only needed if you use 2-way ssl." +"Some software like (for example) ASUS Sonic Studio injects a DLL (library) " +"that is known to create some instabilities. This option let Slic3r check at " +"startup if they are loaded." msgstr "" -#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:418 -#Similar to me: Client certificate files (*.pfx, *.p12)|*.pfx;*.p12|All files|*.* -# 17 changes: Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.* -# translation: Soubory s certifikátem (*.crt, *.pem)|*.crt;*.pem|Všechny soubory|*.* -msgid "Client certificate files (*.pfx, *.p12)|*.pfx;*.p12|All files|*.*" +#: src/libslic3r/PrintConfig.cpp:2233 +#Similar to me: Sparse fill pattern +# 6 changes: Bottom fill pattern +# translation: Vzor spodní výplně +# 6 changes: Top fill pattern +# translation: Vzor výplně horní vrstvy +msgid "Sparse fill pattern" msgstr "" +#: ../../ui_layout/default/print.ui +#Similar to me: Sparse infill pattern +# 6 changes: Sparse infill speed +# translation: Spojení řídkých výplňových čar +# 8 changes: Bottom fill pattern +# translation: Vzor spodní výplně +# 8 changes: Dense infill layer +# translation: Hustá výplňová vrstva +msgid "Sparse infill pattern" +msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:247 -#, possible-boost-format -#Similar to me: Closing %1% while some presets are modified. -# 11 changes: Closing PrusaSlicer while some presets are modified. -# translation: Zavírání PrusaSliceru. Některá přednastavení jsou změněná. -# 17 changes: Creating a new project while some presets are modified. -# translation: Vytváření nového projektu. Některá přednastavení jsou upravená. -msgid "Closing %1% while some presets are modified." + +#: src/libslic3r/PrintConfig.cpp:2626 +#Similar to me: Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues.\nGap fill extrusions are ignored from the automatic volumetric speed computation, unless you set it to 0.\nThis can be expressed as a percentage (for example: 80%) over the Internal Perimeter speed. +# 93 changes: Speed for filling small gaps using short zigzag moves. Keep this reasonably low to avoid too much shaking and resonance issues.\nGap fill extrusions are ignored from the automatic volumetric speed computation, unless you set it to 0. +# translation: Rychlost pro vyplnění malých mezer pomocí krátkých klikatých pohybů. Udržujte ji přiměřeně nízkou, abyste se vyhnuli příliš velkým problémům s chvěním a rezonancí.\"\nVysunutí výplně mezery se při automatickém výpočtu objemové rychlosti ignoruje, pokud ji nenastavíte na 0. +msgid "" +"Speed for filling small gaps using short zigzag moves. Keep this reasonably " +"low to avoid too much shaking and resonance issues.\n" +"Gap fill extrusions are ignored from the automatic volumetric speed " +"computation, unless you set it to 0.\n" +"This can be expressed as a percentage (for example: 80%) over the Internal " +"Perimeter speed." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:240 -#, possible-boost-format -#Similar to me: Closing %1%. Current project is modified. -# 11 changes: Closing PrusaSlicer. Current project is modified. -# translation: Zavírání PrusaSliceru. Aktuální projekt je upravený. -msgid "Closing %1%. Current project is modified." +#: src/libslic3r/PrintConfig.cpp:3918 +msgid "" +"Speed for perimeters (contours, aka vertical shells).\n" +"This can be expressed as a percentage (for example: 80%) over the Default " +"speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/slic3r/GUI/GUI_Preview.cpp:1175 -#Similar to me: Col/C -# 2 changes: Color -# translation: Barva -msgid "Col/C" +#: src/libslic3r/PrintConfig.cpp:801 +msgid "" +"Speed for printing bridges.\n" +"This can be expressed as a percentage (for example: 60%) over the Default " +"speed.\n" +"Set zero to use the autospeed for this feature" msgstr "" -#: src/slic3r/GUI/Plater.cpp:1300 src/slic3r/GUI/Plater.cpp:1312 -#: src/slic3r/GUI/Plater.cpp:1360 src/slic3r/GUI/Plater.cpp:1375 -#, possible-boost-format -#Similar to me: Color %1% at extruder %2% -# 9 changes: Filament at extruder %1% -# translation: Filament v extruderu %1% -msgid "Color %1% at extruder %2%" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Color override" +#: src/libslic3r/PrintConfig.cpp:3695 +#, possible-c-format, possible-boost-format +msgid "" +"Speed for printing overhangs.\n" +"Can be a % of the bridge speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:778 -msgid "Color template used by the icons on the platter." +#: src/libslic3r/PrintConfig.cpp:4551 +#Similar to me: Speed for printing solid regions (top/bottom/internal horizontal shells). \nThis can be expressed as a percentage (for example: 80%) over the Default speed.\nSet zero to use autospeed for this feature. +# 39 changes: Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed. Set zero for auto. +# translation: Rychlost pro tisk plných oblastí (horní/spodní/vnitřní horizontální skořepiny). Lze ji vyjádřit jako procento (například: 80%) oproti výchozí rychlosti plnění. Nastavte nulu pro auto. +# 39 changes: Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed above. Set to zero for auto. +# translation: Rychlost tisku plných oblastí (vrchní / spodní / vnitřní vodorovné stěny). Může být vyjádřeno procenty (například: 80%) oproti výchozí rychlosti vyplnění. Pro automatické nastavení zadejte nulu. +msgid "" +"Speed for printing solid regions (top/bottom/internal horizontal shells). \n" +"This can be expressed as a percentage (for example: 80%) over the Default " +"speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:733 -#Similar to me: Colors -# 1 changes: Color -# translation: Barva -# 2 changes: &Color -# translation: &Barva -# 2 changes: Colour -# translation: Barva -msgid "Colors" +#: src/libslic3r/PrintConfig.cpp:4988 +#Similar to me: Speed for printing support material interface layers.\nIf expressed as percentage (for example 50%) it will be calculated over support material speed.\nSet zero to use autospeed for this feature. +# 47 changes: Speed for printing support material interface layers. If expressed as percentage (for example 50%) it will be calculated over support material speed. +# translation: Rychlost tisku podpěrných kontaktních vrstev. Pokud je vyjádřen procentní podíl (například 50%), vypočítá se podle rychlosti tisku podpěr. +msgid "" +"Speed for printing support material interface layers.\n" +"If expressed as percentage (for example 50%) it will be calculated over " +"support material speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:731 -msgid "Colors and Dark mode" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Colour Change G-code -# 1 changes: Color Change G-code -# translation: G-code pro změnu barvy -# 2 changes: Color change G-code -# translation: G-code pro změnu barvy -# 5 changes: Tool change G-code -# translation: G-code pro výměnu nástroje -msgid "Colour Change G-code" +#: src/libslic3r/PrintConfig.cpp:5051 +msgid "" +"Speed for printing support material.\n" +"This can be expressed as a percentage (for example: 80%) over the Default " +"speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1292 src/libslic3r/PrintConfig.cpp:1322 -#: src/libslic3r/PrintConfig.cpp:1353 src/libslic3r/PrintConfig.cpp:5017 -msgid "Concentric (filled)" +#: src/libslic3r/PrintConfig.cpp:2984 +msgid "" +"Speed for printing the internal fill.\n" +"This can be expressed as a percentage (for example: 80%) over the Solid " +"Infill speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2746 -#Similar to me: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. \nSet this parameter to zero to disable anchoring perimeters connected to a single infill line. -# 8 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line. -# translation: Připojení výplně k vnitřnímu perimetru krátkým segmentem dalšího perimetru. Pokud je vyjádřeno v procentech (příklad: 15%), vypočítává se z šířky extruze infilu. PrusaSlicer se pokouší spojit dvě blízké výplňová čáry krátkým obvodovým perimetrem. Pokud není nalezen žádný takový obvodový perimetr kratší než infill_anchor_max, je výplňová čára spojena s obvodovým perimetrem pouze na jedné straně a délka odebraného obvodového perimetru je omezena na tento parametr, ale ne dále než anchor_length_max. Nastavením tohoto parametru na nulu deaktivujete kotvící perimetry připojené k jedné výplňové čáře. -# 96 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring. -# translation: Připojení výplně k vnitřnímu perimetru krátkým segmentem dalšího perimetru. Pokud je vyjádřeno v procentech (příklad: 15%), vypočítává se z šířky extruze infilu. PrusaSlicer se pokouší spojit dvě blízké výplňová čáry krátkým obvodovým perimetrem. Pokud není nalezen žádný takový obvodový perimetr kratší než tento parametr, je výplňová čára spojena s obvodovým perimetrem pouze na jedné straně a délka odebraného obvodového perimetru je omezena na infill_anchor, ale ne delší než tento parametr. Nastavením tohoto parametru na nulu ukotvení zakážete. -msgid "" -"Connect an infill line to an internal perimeter with a short segment of an " -"additional perimeter. If expressed as percentage (example: 15%) it is " -"calculated over infill extrusion width. Slic3r tries to connect two close " -"infill lines to a short perimeter segment. If no such perimeter segment " -"shorter than infill_anchor_max is found, the infill line is connected to a " -"perimeter segment at just one side and the length of the perimeter segment " -"taken is limited to this parameter, but no longer than anchor_length_max. \n" -"Set this parameter to zero to disable anchoring perimeters connected to a " -"single infill line." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2773 -#Similar to me: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Slic3r tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. \nIf set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0. -# 100 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring. -# translation: Připojení výplně k vnitřnímu perimetru krátkým segmentem dalšího perimetru. Pokud je vyjádřeno v procentech (příklad: 15%), vypočítává se z šířky extruze infilu. PrusaSlicer se pokouší spojit dvě blízké výplňová čáry krátkým obvodovým perimetrem. Pokud není nalezen žádný takový obvodový perimetr kratší než tento parametr, je výplňová čára spojena s obvodovým perimetrem pouze na jedné straně a délka odebraného obvodového perimetru je omezena na infill_anchor, ale ne delší než tento parametr. Nastavením tohoto parametru na nulu ukotvení zakážete. -# 133 changes: Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. PrusaSlicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line. -# translation: Připojení výplně k vnitřnímu perimetru krátkým segmentem dalšího perimetru. Pokud je vyjádřeno v procentech (příklad: 15%), vypočítává se z šířky extruze infilu. PrusaSlicer se pokouší spojit dvě blízké výplňová čáry krátkým obvodovým perimetrem. Pokud není nalezen žádný takový obvodový perimetr kratší než infill_anchor_max, je výplňová čára spojena s obvodovým perimetrem pouze na jedné straně a délka odebraného obvodového perimetru je omezena na tento parametr, ale ne dále než anchor_length_max. Nastavením tohoto parametru na nulu deaktivujete kotvící perimetry připojené k jedné výplňové čáře. +#: src/libslic3r/PrintConfig.cpp:5361 +#Similar to me: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish.\nThis can be expressed as a percentage (for example: 80%) over the Solid Infill speed.\nSet zero to use autospeed for this feature. +# 34 changes: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set to zero for auto. +# translation: Rychlost tisku vrchních plných vrstev (vztahuje se pouze na nejvyšší horní vrstvy a nikoli na jejich vnitřní plné vrstvy). Rychlost lze zpomalit, abyste získali hezčí povrchovou úpravu. Může být vyjádřena procenty (například: 80%) z rychlosti plné výplně materiálu výše. Pro automatické nastavení zadejte nulu. +# 36 changes: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set zero for auto. +# translation: Rychlost tisku horních plných vrstev (platí pouze pro nejsvrchnější vnější vrstvy, nikoli pro jejich vnitřní plné vrstvy). Chcete-li získat hezčí povrchovou úpravu, můžete ji zpomalit. Lze ji vyjádřit v procentech (například: 80%) nad rychlost plného plnění výše. Nastavte nulu pro auto. msgid "" -"Connect an infill line to an internal perimeter with a short segment of an " -"additional perimeter. If expressed as percentage (example: 15%) it is " -"calculated over infill extrusion width. Slic3r tries to connect two close " -"infill lines to a short perimeter segment. If no such perimeter segment " -"shorter than this parameter is found, the infill line is connected to a " -"perimeter segment at just one side and the length of the perimeter segment " -"taken is limited to infill_anchor, but no longer than this parameter. \n" -"If set to 0, the old algorithm for infill connection will be used, it should " -"create the same result as with 1000 & 0." +"Speed for printing top solid layers (it only applies to the uppermost " +"external layers and not to their internal solid layers). You may want to " +"slow down this to get a nicer surface finish.\n" +"This can be expressed as a percentage (for example: 80%) over the Solid " +"Infill speed.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2803 src/libslic3r/PrintConfig.cpp:2821 -#: src/libslic3r/PrintConfig.cpp:2839 src/libslic3r/PrintConfig.cpp:2857 -msgid "Connected" +#: src/libslic3r/PrintConfig.cpp:5217 +msgid "" +"Speed for thin walls (external extrusions that are alone because the obect " +"is too thin at these places).\n" +"This can be expressed as a percentage (for example: 80%) over the External " +"Perimeter speed.\n" +"Set zero to use autospeed for this feature." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:2804 src/libslic3r/PrintConfig.cpp:2822 -#: src/libslic3r/PrintConfig.cpp:2840 src/libslic3r/PrintConfig.cpp:2858 -msgid "Connected to hole perimeters" +#: ../../ui_layout/default/print.ui +#Similar to me: Support & Other +# 5 changes: Support Blocker +# translation: Blokátor podpěr +# 5 changes: Support pattern +# translation: Vzor podpory +# 6 changes: Support Enforcer +# translation: Vynucení podpěr +msgid "Support & Other" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2823 -#: src/libslic3r/PrintConfig.cpp:2841 src/libslic3r/PrintConfig.cpp:2859 -msgid "Connected to outer perimeters" -msgstr "" - -#: ../../ui_layout/default/print.ui : l143 -#Similar to me: Connection length -# 6 changes: Retraction Length -# translation: Vzdálenost retrakce -msgid "Connection length" +#: src/libslic3r/PrintConfig.cpp:4739 +#Similar to me: Support acceleration +# 6 changes: Default acceleration +# translation: Výchozí zrychlení +# 6 changes: Support Generator +# translation: Generátor Podpěr +# 7 changes: Bridge acceleration +# translation: Zrychlení mostu +msgid "Support acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2829 -msgid "Connection of bottom infill lines" +#: src/libslic3r/PrintConfig.cpp:4761 +#Similar to me: Support interface acceleration +# 9 changes: Support interface pattern +# translation: Vzor kontaktní vrstvy podpěr +# 10 changes: Support interface speed +# translation: Rychlost kontaktní vrstvy podpěr +msgid "Support interface acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2847 -msgid "Connection of solid infill lines" +#: src/libslic3r/PrintConfig.cpp:4901 +#Similar to me: Support interface fan speed +# 4 changes: Support interface speed +# translation: Rychlost kontaktní vrstvy podpěr +# 7 changes: Support interface pattern +# translation: Vzor kontaktní vrstvy podpěr +msgid "Support interface fan speed" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:2793 -msgid "Connection of sparse infill lines" +#: ../../ui_layout/default/print.ui +#Similar to me: Support Material +# 1 changes: Support material +# translation: Podpěry +# 2 changes: support material +# translation: Podpěry +# 5 changes: Support pattern +# translation: Vzor podpory +msgid "Support Material" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2811 -msgid "Connection of top infill lines" +#: src/libslic3r/PrintConfig.cpp:5062 +msgid "Support tower style" msgstr "" -#: src/slic3r/Utils/OctoPrint.cpp:303 -#, possible-c-format, possible-boost-format -#Similar to me: Connection to %s works correctly. -# 4 changes: Connection to Duet works correctly. -# translation: Připojení k Duet funguje správně. -# 7 changes: Connection to AstroBox works correctly. -# translation: Připojení k AstroBoxu funguje správně. -# 8 changes: Connection to PrusaLink works correctly. -# translation: Připojení k PrusaLinku funguje správně. -msgid "Connection to %s works correctly." +#: src/slic3r/GUI/Preferences.cpp:1136 +#Similar to me: Tab layout Options +# 5 changes: Layout Options +# translation: Možnosti rozložení +msgid "Tab layout Options" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4808 -msgid "Contact distance on top of supports" +#: src/slic3r/GUI/Search.cpp:375 src/slic3r/GUI/Search.cpp:434 +msgid "tags" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4825 -msgid "Contact distance under the bottom of supports" +#: src/slic3r/GUI/Preferences.cpp:823 +msgid "Text color template" msgstr "" -#: src/slic3r/GUI/AboutDialog.cpp:277 -#Similar to me: Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand Rémi and numerous others. -# 13 changes: Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and numerous others. -# translation: Příspěvky od Henrika Brixa Andersena, Nicolase Dandrimonta, Marka Hindessa, Petra Ledviny, Josefa Lenoxe, Y. Sapira, Mika Sheldrakeho, Vojtěcha Bubnika a mnoha dalších. +#: src/slic3r/GUI/Plater.cpp:2648 +#, possible-boost-format +#Similar to me: The dimensions of the object from file %1% seem to be defined in inches.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of the object?" +msgid_plural "The dimensions of some objects from file %1% seem to be defined in inches.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of these objects? +# 26 changes: The dimensions of the object from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" +msgid_plural "The dimensions of some objects from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? +# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v palcích.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? +# 36 changes: The dimensions of the object from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" +msgid_plural "The dimensions of some objects from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? +# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v metrech.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? msgid "" -"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " -"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand " -"Rémi and numerous others." -msgstr "" +"The dimensions of the object from file %1% seem to be defined in inches.\n" +"The internal unit of %2% is a millimeter. Do you want to recalculate the " +"dimensions of the object?" +msgid_plural "" +"The dimensions of some objects from file %1% seem to be defined in inches.\n" +"The internal unit of %2% is a millimeter. Do you want to recalculate the " +"dimensions of these objects?" +msgstr[0] "" +msgstr[1] "" -#: src/slic3r/GUI/GUI_App.cpp:285 -#Similar to me: Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others. -# 13 changes: Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others. -# translation: Příspěvky od Vojtěcha Bubníka, Enrica Turriho, Oleksandry Iushchenko, Tamáse Mészárose, Lukáše Matěny, Vojtěcha Krále, Davida Kocíka a řady dalších. +#: src/slic3r/GUI/Plater.cpp:2626 +#, possible-boost-format +#Similar to me: The dimensions of the object from file %1% seem to be defined in meters.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of the object?" +msgid_plural "The dimensions of some objects from file %1% seem to be defined in meters.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of these objects? +# 26 changes: The dimensions of the object from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" +msgid_plural "The dimensions of some objects from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? +# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v metrech.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? +# 36 changes: The dimensions of the object from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" +msgid_plural "The dimensions of some objects from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? +# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v palcích.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? msgid "" -"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " -"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and " -"numerous others." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:535 -#Similar to me: Controls -# 3 changes: Contents -# translation: Obsah -msgid "Controls" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5718 src/libslic3r/PrintConfig.cpp:5719 -msgid "Convert round holes to polyholes" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Convert round vertical holes to polyholes" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Cooling fan -# 4 changes: Cooling -# translation: Chlazení -msgid "Cooling fan" -msgstr "" +"The dimensions of the object from file %1% seem to be defined in meters.\n" +"The internal unit of %2% is a millimeter. Do you want to recalculate the " +"dimensions of the object?" +msgid_plural "" +"The dimensions of some objects from file %1% seem to be defined in meters.\n" +"The internal unit of %2% is a millimeter. Do you want to recalculate the " +"dimensions of these objects?" +msgstr[0] "" +msgstr[1] "" -#: src/libslic3r/PrintConfig.cpp:2017 -#Similar to me: Cooling moves are gradually accelerated towards this speed. -# 4 changes: Cooling moves are gradually accelerating towards this speed. -# translation: Chladící pohyby se postupně zrychlují až k této rychlosti. -# 16 changes: Cooling moves are gradually accelerating beginning at this speed. -# translation: Chladicí pohyby se postupně zrychlují a začínají touto rychlostí. -msgid "Cooling moves are gradually accelerated towards this speed. " +#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:187 +#Similar to me: The file does not exist. +# 4 changes: : file does not exist! +# translation: : soubor neexistuje! +# 9 changes: Directory does not exist +# translation: Adresář neexistuje +msgid "The file does not exist." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1996 -#Similar to me: Cooling moves are gradually accelerated, starting at this speed. -# 10 changes: Cooling moves are gradually accelerating beginning at this speed. -# translation: Chladicí pohyby se postupně zrychlují a začínají touto rychlostí. -# 14 changes: Cooling moves are gradually accelerating towards this speed. -# translation: Chladící pohyby se postupně zrychlují až k této rychlosti. -msgid "Cooling moves are gradually accelerated, starting at this speed. " +#: src/libslic3r/PrintConfig.cpp:2536 +#, possible-c-format, possible-boost-format +#Similar to me: The maximum distance that each skin point can be offset (both ways), measured perpendicular to the perimeter wall.\nCan be a % of the nozzle diameter. +# 36 changes: The maximum distance that each skin point can be offset (both ways), measured perpendicular to the perimeter wall. +# translation: Maximální vzdálenost, o kterou může být každý bod pláště posunut (oběma směry), měřeno kolmo k obvodové stěně. +msgid "" +"The maximum distance that each skin point can be offset (both ways), " +"measured perpendicular to the perimeter wall.\n" +"Can be a % of the nozzle diameter." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4286 +#: src/slic3r/GUI/Plater.cpp:1127 msgid "" -"Cost of moving the extruder. The highest penalty is when the point is the " -"furthest from the position of the extruder before extruding the external " -"perimeter" +"The option you selected in the search dialog isn't available in the current " +"mode/tags. Do you want to switch to the option tag?" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4276 +#: src/slic3r/GUI/Plater.cpp:6284 +#Similar to me: The platter is empty.\nDo you want to save the project? +# 1 changes: The plater is empty.\nDo you want to save the project? +# translation: Tisková podložka je prázdná.\nChcete projekt uložit? msgid "" -"Cost of placing the seam at a bad angle. The worst angle (max penalty) is " -"when it's flat." +"The platter is empty.\n" +"Do you want to save the project?" msgstr "" -#: src/libslic3r/PrintConfig.cpp:4265 -msgid "Cost-based" +#: src/slic3r/GUI/ConfigManipulation.cpp:90 +#, possible-c-format, possible-boost-format +#Similar to me: The Spiral Vase mode requires:\n- one perimeter\n- no top solid layers\n- 0% fill density\n- no support material\n- Ensure vertical shell thickness enabled\n- disabled 'no solid infill over perimeters'\n- unchecked 'exact last layer height'\n- unchecked 'dense infill'\n- unchecked 'extra perimeters'- unchecked 'gap fill after last perimeter'- disabled 'no solid fill over X perimeters' +# 134 changes: The Spiral Vase mode requires:\n- one perimeter\n- no top solid layers\n- 0% fill density\n- no support material\n- Ensure vertical shell thickness enabled\n- unchecked 'exact last layer height'\n- unchecked 'dense infill'\n- unchecked 'extra perimeters' +# translation: Režim spirálové vázy vyžaduje:\n- jeden perimetr\n- žádné horní plné vrstvy\n- 0% hustota výplně\n- žádný podpůrný materiál\n- Ujistěte se, že je povolena svislá tloušťka skořepiny\n- nezaškrtnuto 'přesná výška poslední vrstvy'\n- nezaškrtnuto 'hustá výplň'\n- nezaškrtnuté 'extra perimetry' +msgid "" +"The Spiral Vase mode requires:\n" +"- one perimeter\n" +"- no top solid layers\n" +"- 0% fill density\n" +"- no support material\n" +"- Ensure vertical shell thickness enabled\n" +"- disabled 'no solid infill over perimeters'\n" +"- unchecked 'exact last layer height'\n" +"- unchecked 'dense infill'\n" +"- unchecked 'extra perimeters'- unchecked 'gap fill after last perimeter'- " +"disabled 'no solid fill over X perimeters'" msgstr "" -#: src/slic3r/Utils/AstroBox.cpp:85 src/slic3r/Utils/FlashAir.cpp:69 -#: src/slic3r/Utils/OctoPrint.cpp:176 src/slic3r/Utils/Repetier.cpp:88 +#: src/libslic3r/PrintConfig.cpp:4843 #, possible-c-format, possible-boost-format -#Similar to me: Could not connect to %s -# 4 changes: Could not connect to Duet -# translation: Nelze se připojit k Duet -# 7 changes: Could not connect to AstroBox -# translation: Nelze se připojit k AstroBoxu -# 7 changes: Could not connect to FlashAir -# translation: Nelze se spojit s FlashAir -msgid "Could not connect to %s" +#Similar to me: The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the nozzle diameter.\nIf set to zero, support_material_contact_distance will be used for both top and bottom contact Z distances. +# 91 changes: The vertical distance between the object top surface and the support material interface. If set to zero, support_material_contact_distance will be used for both top and bottom contact Z distances. +# translation: Vertikální vzdálenost mezi horním povrchem objektu a podpěr. Pokud je nastavena na nulu, použije se hodnota support_material_contact_distance, která určí shodnou vzdálenost mezi podpěry a horním/spodní povrchem objektu v ose Z. +# 94 changes: The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the extruding width used for the interface layers. +# translation: Vertikální vzdálenost mezi objektem a kontaktní vrstvou (když je podpora vytištěna na horní straně objektu). Může to být % šířky extruze použitá pro kontaktní vrstvy. +msgid "" +"The vertical distance between object and support material interface(when the " +"support is printed on top of the object). Can be a % of the nozzle " +"diameter.\n" +"If set to zero, support_material_contact_distance will be used for both top " +"and bottom contact Z distances." msgstr "" -#: src/slic3r/Utils/Http.cpp:106 -#Similar to me: Could not detect system SSL certificate store. The slicer will be unable to establish secure network connections. -# 6 changes: Could not detect system SSL certificate store. PrusaSlicer will be unable to establish secure network connections. -# translation: Úložiště systémových certifikátů SSL se nepodařilo zjistit. PrusaSlicer nebude schopen navázat zabezpečené síťové připojení. +#: src/libslic3r/PrintConfig.cpp:4826 +#, possible-c-format, possible-boost-format +#Similar to me: The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the nozzle diameter. +# 37 changes: The vertical distance between support material interface and the object(when the object is printed on top of the support). Setting this to 0 will also prevent Slic3r from using bridge flow and speed for the first object layer. Can be a % of the extruding width used for the interface layers. +# translation: Vertikální vzdálenost mezi rozhraním nosného materiálu a objektem (když je objekt vytištěn na vršek podložky). Nastavením této hodnoty na 0 také zabráníte Slic3r v použití mostního toku a rychlosti pro první vrstvu objektu. Může být % šířka vytlačování použitá pro vrstvy rozhraní. msgid "" -"Could not detect system SSL certificate store. The slicer will be unable to " -"establish secure network connections." +"The vertical distance between support material interface and the object(when " +"the object is printed on top of the support). Setting this to 0 will also " +"prevent Slic3r from using bridge flow and speed for the first object layer. " +"Can be a % of the nozzle diameter." msgstr "" -#: src/slic3r/GUI/Plater.cpp:5670 -#Similar to me: Create a new project? -# 4 changes: Creating a new project -# translation: Vytváření nového projektu -# 6 changes: Start a new project -# translation: Vytvořit nový projekt -msgid "Create a new project?" +#: src/slic3r/GUI/Preferences.cpp:625 +msgid "These tooltip may be bothersome. You can hide them with this option." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1951 -msgid "Create a test print to help you to level your printer bed." +#: src/libslic3r/PrintConfig.cpp:5200 +#Similar to me: Thin Walls +# 1 changes: Thin walls +# translation: Tenké stěny +# 2 changes: Thin wall +# translation: Tenké stěny +msgid "Thin Walls" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1961 -msgid "Create a test print to help you to set your bridge flow ratio." +#: src/libslic3r/PrintConfig.cpp:5201 +#Similar to me: Thin walls acceleration +# 7 changes: Infill acceleration +# translation: Zrychlení výplně +# 8 changes: Default acceleration +# translation: Výchozí zrychlení +# 8 changes: Travel acceleration +# translation: Cestovní zrychlení +msgid "Thin walls acceleration" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1954 +#: src/libslic3r/PrintConfig.cpp:5277 +#Similar to me: This custom code is inserted at every extruder change. If you don't leave this empty, you are expected to take care of the toolchange yourself - Slic3r will not output any other G-code to change the filament. You can use placeholder variables for all Slic3r settings as well as {toolchange_z}, {layer_z}, {layer_num}, {max_layer_z}, {previous_extruder} and {next_extruder}, so e.g. the standard toolchange command can be scripted as T{next_extruder}.!! Warning !!: if any character is written here, Slic3r won't output any toochange command by itself. +# 55 changes: This custom code is inserted at every extruder change. If you don't leave this empty, you are expected to take care of the toolchange yourself - Slic3r will not output any other G-code to change the filament. You can use placeholder variables for all Slic3r settings as well as {previous_extruder} and {next_extruder}, so e.g. the standard toolchange command can be scripted as T{next_extruder}.!! Warning !!: if any character is written here, Slic3r won't output any toochange command by itself. +# translation: Tento vlastní kód se vkládá při každé výměně extruderu. Pokud toto nenecháte prázdné, očekává se, že se o výměnu nástroje postaráte sami - Slic3r nebude vydávat žádný jiný G-kód pro změnu vlákna. Můžete použít zástupné proměnné pro všechna nastavení Slic3r a také {previous_extruder} a {next_extruder}, takže např. standardní příkaz toolchange lze naskriptovat jako T{next_extruder}.!! Upozornění!!: pokud je zde napsán jakýkoli znak, Slic3r nevypíše žádnou změnu příkaz sám o sobě. msgid "" -"Create a test print to help you to set your filament extrusion multiplier." +"This custom code is inserted at every extruder change. If you don't leave " +"this empty, you are expected to take care of the toolchange yourself - " +"Slic3r will not output any other G-code to change the filament. You can use " +"placeholder variables for all Slic3r settings as well as {toolchange_z}, " +"{layer_z}, {layer_num}, {max_layer_z}, {previous_extruder} and " +"{next_extruder}, so e.g. the standard toolchange command can be scripted as T" +"{next_extruder}.!! Warning !!: if any character is written here, Slic3r " +"won't output any toochange command by itself." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1956 -msgid "Create a test print to help you to set your filament temperature." +#: src/libslic3r/PrintConfig.cpp:749 +#Similar to me: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this.\nFor reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * (nozzle diameter) * PI/4 +# 101 changes: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this. +# translation: Tato hodnota určuje množství vytlačeného plastu při vytváření mostů. Mírným snížením této hodnoty můžete předejít pronášení, i když přednastavené hodnoty jsou většinou dobré a je lepší experimentovat s chlazením (využitím ventilátoru) než s touto hodnotou. +msgid "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this.\n" +"For reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * " +"(nozzle diameter) * PI/4" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1963 +#: src/libslic3r/PrintConfig.cpp:4903 +#Similar to me: This fan speed is enforced during all support interfaces, to be able to weaken their bonding with a high fan speed.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers. +# 71 changes: This fan speed is enforced during all top fills.\nSet to 1 to disable the fan.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers. +# translation: Tato rychlost ventilátoru je vynucena při všech horních plněních.\nNastavením na 1 deaktivujete ventilátor.\nPokud chcete toto přepsání deaktivovat, nastavte na -1.\nLze přepsat pouze pomocí disable_fan_first_layers. +# 81 changes: This fan speed is enforced during bridges and overhangs. It won't slow down the fan if it's currently running at a higher speed.\nSet to -1 to disable this override.\nCan only be overriden by disable_fan_first_layers. +# translation: Tato rychlost ventilátoru je vynucena během mostů a převisů. Nezpomalí ventilátor, pokud aktuálně běží na vyšší rychlost.\nPokud chcete toto přepsání deaktivovat, nastavte na -1.\nLze přepsat pouze pomocí disable_fan_first_layers. msgid "" -"Create a test print to help you to set your over-bridge flow ratio and " -"ironing pattern." +"This fan speed is enforced during all support interfaces, to be able to " +"weaken their bonding with a high fan speed.\n" +"Set to 1 to disable the fan.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1958 -msgid "Create a test print to help you to set your retraction length." +#: src/libslic3r/PrintConfig.cpp:5498 +msgid "" +"This flag will wipe the nozzle a bit inward after extruding an external " +"perimeter. The wipe_extra_perimeter is executed first, then this move inward " +"before the retraction wipe. Note that the retraction wipe will follow the " +"exact external perimeter (center) line if this parameter is disabled, and " +"will follow the inner side of the external periemter line if enabled" msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1980 -msgid "Create an mosaic-like tile with filament changes." +#: src/libslic3r/PrintConfig.cpp:1148 +#Similar to me: This is the acceleration your printer will be reset to after the role-specific acceleration values are used (perimeter/infill). \nAccelerations from the left column can also be expressed as a percentage of this value.\nThis can be expressed as a percentage (for example: 80%) over the machine Max Acceleration for X axis.\nSet zero to prevent resetting acceleration at all. +# 137 changes: This is the acceleration your printer will be reset to after the role-specific acceleration values are used (perimeter/infill). \nYou can set it as a % of the max of the X machine acceleration limit.\nSet zero to prevent resetting acceleration at all. +# translation: Toto je zrychlení, na které bude vaše tiskárna resetována po použití hodnot zrychlení specifických pro roli (perimetr/výplň). \nMůžete to nastavit jako % z maxima limitu zrychlení X stroje.\nNastavte nulu, abyste vůbec zabránili resetování zrychlení. +msgid "" +"This is the acceleration your printer will be reset to after the role-" +"specific acceleration values are used (perimeter/infill). \n" +"Accelerations from the left column can also be expressed as a percentage of " +"this value.\n" +"This can be expressed as a percentage (for example: 80%) over the machine " +"Max Acceleration for X axis.\n" +"Set zero to prevent resetting acceleration at all." msgstr "" -#: src/slic3r/GUI/MainFrame.cpp:1975 -msgid "Create an object by writing little easy script." +#: src/libslic3r/PrintConfig.cpp:657 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for bridges.\nCan be a % of the default acceleration\nSet zero to use default acceleration for bridges. +# 28 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 29 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 34 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. +msgid "" +"This is the acceleration your printer will use for bridges.\n" +"Can be a % of the default acceleration\n" +"Set zero to use default acceleration for bridges." msgstr "" -#: src/slic3r/Utils/Http.cpp:124 -#Similar to me: CURL init has failed. The slicer will be unable to establish network connections. See logs for additional details. -# 6 changes: CURL init has failed. PrusaSlicer will be unable to establish network connections. See logs for additional details. -# translation: CURL init selhal. PrusaSlicer nebude schopen navázat síťová připojení. Další podrobnosti najdete v logu. +#: src/libslic3r/PrintConfig.cpp:872 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for brim and skirt. \nCan be a % of the support acceleration\nSet zero to use support acceleration. +# 47 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 50 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 53 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"CURL init has failed. The slicer will be unable to establish network " -"connections. See logs for additional details." -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Curve smoothing" +"This is the acceleration your printer will use for brim and skirt. \n" +"Can be a % of the support acceleration\n" +"Set zero to use support acceleration." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1134 -msgid "Curve smoothing cutoff dist" +#: src/libslic3r/PrintConfig.cpp:1471 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for external perimeters. \nCan be a % of the internal perimeter acceleration\nSet zero to use internal perimeter acceleration for external perimeters. +# 54 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 69 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. +# 69 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +msgid "" +"This is the acceleration your printer will use for external perimeters. \n" +"Can be a % of the internal perimeter acceleration\n" +"Set zero to use internal perimeter acceleration for external perimeters." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1104 -msgid "Curve smoothing minimum angle (concave)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1089 -msgid "Curve smoothing minimum angle (convex)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1118 -msgid "Curve smoothing precision" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:495 -#Similar to me: Custom Client certificate file can be specified for 2-way ssl authentication, in p12/pfx format. If left blank, no client certificate is used. -# 56 changes: Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used. -# translation: Pro HTTPS připojení OctoPrintu lze zadat vlastní CA certifikát ve formátu crt/pem. Pokud zůstane pole prázdné, použije se výchozí úložiště certifikátů OS CA. -msgid "" -"Custom Client certificate file can be specified for 2-way ssl " -"authentication, in p12/pfx format. If left blank, no client certificate is " -"used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1769 -msgid "Custom Filament variables" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3595 -msgid "Custom Print variables" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3943 -#Similar to me: Custom Printer variables -# 9 changes: Custom Printer Setup -# translation: Vlastní nastavení tiskárny -msgid "Custom Printer variables" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1768 src/libslic3r/PrintConfig.cpp:3594 -#: src/libslic3r/PrintConfig.cpp:3942 -#Similar to me: Custom variables -# 6 changes: Custom Printer -# translation: Vlastní tiskárna -msgid "Custom variables" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1133 -msgid "cutoff" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1430 -msgid "Cutting corners" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5395 -msgid "Decelerate with target acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1146 -#Similar to me: Default acceleration -# 8 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Default acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1226 -msgid "Default distance between objects" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1228 -msgid "" -"Default distance used for the auto-arrange feature of the platter.\n" -"Set to 0 to use the last value instead." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1720 -#Similar to me: Default extrusion spacing -# 7 changes: Default extrusion width -# translation: Výchozí šířka extruze -msgid "Default extrusion spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3452 src/libslic3r/PrintConfig.cpp:3453 -msgid "Default fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2443 -#Similar to me: Default first layer speed -# 9 changes: First layer speed -# translation: Rychlost první vrstvy -msgid "Default first layer speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1372 -msgid "Default infill margin" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1176 -#Similar to me: Default speed -# 5 changes: Default color -# translation: Výchozí barva -# 5 changes: Default font -# translation: Výchozí typ písma -msgid "Default speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6558 -#Similar to me: Defines the pad cavity depth. Set zero to disable the cavity. Be careful when enabling this feature, as some resins may produce an extreme suction effect inside the cavity, which makes peeling the print off the vat foil difficult. -# 3 changes: Defines the pad cavity depth. Set to zero to disable the cavity. Be careful when enabling this feature, as some resins may produce an extreme suction effect inside the cavity, which makes peeling the print off the vat foil difficult. -# translation: Definuje hloubku dutiny. Chcete-li dutinu vypnout, nastavte ji na nulu. Při povolování této funkce buďte opatrní, protože některé pryskyřice mohou způsobit extrémní sací efekt uvnitř dutiny, což ztěžuje odlupování tisku z fólie ve vaničce. -msgid "" -"Defines the pad cavity depth. Set zero to disable the cavity. Be careful " -"when enabling this feature, as some resins may produce an extreme suction " -"effect inside the cavity, which makes peeling the print off the vat foil " -"difficult." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2875 -msgid "Dense infill algorithm" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2865 src/libslic3r/PrintConfig.cpp:2866 -msgid "Dense infill layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6183 -msgid "Dental" -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l40 -#Similar to me: Depth -# 2 changes: tenth -# translation: desátého -msgid "Depth" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1172 -#Similar to me: Dere. -# 2 changes: Done. -# translation: Hotovo. -msgid "Dere." -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l26 -#Similar to me: Deretraction -# 1 changes: Deretractions -# translation: Deretrakce -# 3 changes: Retraction -# translation: Retrakce -# 4 changes: Direction -# translation: Směr -msgid "Deretraction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5144 -msgid "" -"Detect single-width walls (parts where two extrusions don't fit and we need " -"to collapse them into a single trace). If unchecked, Slic3r may try to fit " -"perimeters where it's not possible, creating some overlap leading to over-" -"extrusion." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:882 -msgid "Detection radius" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1854 -msgid "Determines whether toolchange temperatures will be applied" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:304 -msgid "Dialogs" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:39 -#Similar to me: Dimension: -# 4 changes: Direction -# translation: Směr -msgid "Dimension:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:34 -msgid "Dimensional accuracy (default)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3218 -#Similar to me: Disable -# 1 changes: Disabled -# translation: Zakázáno -msgid "Disable" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:578 -msgid "Disable 'Avoid crossing perimeters' for the first layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3636 -#Similar to me: Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will probably be invisible). -# 6 changes: Disables retraction when the travel path does not exceed the upper layer's perimeters (and thus any ooze will be probably invisible). -# translation: Vypne retrakce, pokud dráha nepřekročí perimetr vrchní vrstvy (a proto bude pravděpodobně jakékoliv odkapávání neviditelné). -msgid "" -"Disables retraction when the travel path does not exceed the upper layer's " -"perimeters (and thus any ooze will probably be invisible)." -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui -msgid "Display mirroring" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:647 -msgid "Display setting icons" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Distance -# 3 changes: Instances -# translation: Instance -msgid "Distance" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4339 -msgid "" -"Distance between skirt and object(s) ; or from the brim if using draft " -"shield or you set 'skirt_distance_from_brim'." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4337 -#Similar to me: Distance from object -# 5 changes: Distance from brim/object -# translation: Vzdálenost od límce/objektu -msgid "Distance from object" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2341 -msgid "Distribution" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:576 -msgid "Don't avoid crossing on 1st layer" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:206 -msgid "Don't switch" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5504 -msgid "" -"Don't wipe when you don't cross a perimeter. Need " -"'only_retract_when_crossing_perimeters'and 'wipe' enabled." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:32 -msgid "Each militer add this value to the retraction value." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:894 -#Similar to me: Ear pattern -# 4 changes: Fill pattern -# translation: Vzor výplně -msgid "Ear pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3128 -msgid "" -"Emit something at 1 minute intervals into the G-code to let the firmware " -"show accurate remaining time." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5547 -msgid "Enable advanced wiping volume" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2556 -msgid "Enable Gap fill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2558 +#: src/libslic3r/PrintConfig.cpp:2371 +#Similar to me: This is the acceleration your printer will use for first layer of object above raft interface.\nIf set to %, all accelerations will be reduced by that ratio.\nSet zero to disable acceleration control for first layer of object above raft interface. +# 64 changes: This is the acceleration your printer will use for first layer of object above raft interface. Set zero to disable acceleration control for first layer of object above raft interface. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu objektu nad raftem. Nastavením nuly vypnete řízení zrychlení pro první vrstvu objektu nad raftem. msgid "" -"Enable gap fill algorithm. It will extrude small lines between perimeters " -"when there is not enough space for another perimeter or an infill." -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Enable ironing post-process" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1884 -msgid "Enable Skinnydip string reduction" +"This is the acceleration your printer will use for first layer of object " +"above raft interface.\n" +"If set to %, all accelerations will be reduced by that ratio.\n" +"Set zero to disable acceleration control for first layer of object above " +"raft interface." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2626 -#Similar to me: Enable this to get a commented G-code file, with each line explained by descriptive text. If you print from an SD card, the additional weight of the file could make your firmware slow down. -# 5 changes: Enable this to get a commented G-code file, with each line explained by a descriptive text. If you print from SD card, the additional weight of the file could make your firmware slow down. -# translation: Aktivací získáte komentovaný soubor G-code, přičemž každý řádek je doplněn popisným textem. Pokud tisknete z SD karty, dodatečné informace v souboru můžou zpomalit firmware. +#: src/libslic3r/PrintConfig.cpp:2569 +#Similar to me: This is the acceleration your printer will use for gap fills. \nThis can be expressed as a percentage over the perimeter acceleration.\nSet zero to use perimeter acceleration for gap fills. +# 69 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. msgid "" -"Enable this to get a commented G-code file, with each line explained by " -"descriptive text. If you print from an SD card, the additional weight of the " -"file could make your firmware slow down." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5519 -msgid "Enable wipe tower" +"This is the acceleration your printer will use for gap fills. \n" +"This can be expressed as a percentage over the perimeter acceleration.\n" +"Set zero to use perimeter acceleration for gap fills." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2868 +#: src/libslic3r/PrintConfig.cpp:671 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for internal bridges. \nCan be a % of the default acceleration\nSet zero to use bridge acceleration for internal bridges. +# 37 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 37 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 41 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"Enables the creation of a support layer under the first solid layer. This " -"allows you to use a lower infill ratio without compromising the top quality. " -"The dense infill is laid out with a 50% infill density." +"This is the acceleration your printer will use for internal bridges. \n" +"Can be a % of the default acceleration\n" +"Set zero to use bridge acceleration for internal bridges." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1361 +#: src/libslic3r/PrintConfig.cpp:3795 #, possible-c-format, possible-boost-format -msgid "Enforce 100% fill volume" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:386 -msgid "" -"Enforce a specific color on thumbnails. If not enforced, their color will be " -"the one defined by the filament." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4186 -msgid "Enforce lift on first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4185 -msgid "Enforce on first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:385 -msgid "Enforce thumbnail color" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4605 +#Similar to me: This is the acceleration your printer will use for internal perimeters. \nCan be a % of the default acceleration\nSet zero to use default acceleration for internal perimeters. +# 28 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 41 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 42 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"Ensure that the slicer won't add heating, fan, extruder... commands before " -"or just after your start-gcode.If set to true, you have to write a good and " -"complete start_gcode, as no checks are made anymore." +"This is the acceleration your printer will use for internal perimeters. \n" +"Can be a % of the default acceleration\n" +"Set zero to use default acceleration for internal perimeters." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5961 +#: src/libslic3r/PrintConfig.cpp:3037 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for ironing. \nCan be a % of the top solid infill acceleration\nSet zero to use top solid infill acceleration for ironing. +# 49 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 57 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 58 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"Enter here the gcode to end the toolhead action, like stopping the spindle. " -"You have access to {next_extruder} and {previous_extruder}. " -"previous_extruder is the 'extruder number' of the current milling tool, it's " -"equal to the index (begining at 0) of the milling tool plus the number of " -"extruders. next_extruder is the 'extruder number' of the next tool, it may " -"be a normal extruder, if it's below the number of extruders. The number of " -"extruder is available at {extruder}and the number of milling tool is " -"available at {milling_cutter}." +"This is the acceleration your printer will use for ironing. \n" +"Can be a % of the top solid infill acceleration\n" +"Set zero to use top solid infill acceleration for ironing." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2062 +#: src/libslic3r/PrintConfig.cpp:3681 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for overhangs.\nCan be a % of the bridge acceleration\nSet zero to to use bridge acceleration for overhangs. +# 40 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 41 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 44 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"Enter the shrinkage percentage that the filament will get after cooling " -"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " -"compensate. Only the filament used for the perimeter is taken into account.\n" -"Be sure to allow enough space between objects, as this compensation is done " -"after the checks." -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:5661 -#Similar to me: Erase all objects -# 6 changes: Deletes all objects -# translation: Smazat všechny objekty -# 6 changes: Label objects -# translation: Označování objektů -# 6 changes: Select all objects -# translation: Vybrat všechny objekty -msgid "Erase all objects" +"This is the acceleration your printer will use for overhangs.\n" +"Can be a % of the bridge acceleration\n" +"Set zero to to use bridge acceleration for overhangs." msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:945 src/slic3r/GUI/GUI_App.cpp:1042 -#, possible-boost-format -#Similar to me: Error parsing %1% config file, it is probably corrupted. Try to manually delete the file to recover from the error. -# 16 changes: Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to manually delete the file to recover from the error. -# translation: Chyba při zpracování konfiguračního souboru PrusaGCodeVieweru. Je pravděpodobně poškozený. Pro zotavení zkuste soubor ručně odstranit. +#: src/libslic3r/PrintConfig.cpp:4700 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for solid infills. \nCan be a % of the default acceleration\nSet zero to use default acceleration for solid infills. +# 25 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 35 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 38 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"Error parsing %1% config file, it is probably corrupted. Try to manually " -"delete the file to recover from the error." +"This is the acceleration your printer will use for solid infills. \n" +"Can be a % of the default acceleration\n" +"Set zero to use default acceleration for solid infills." msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:940 src/slic3r/GUI/GUI_App.cpp:1037 -#, possible-boost-format -#Similar to me: Error parsing %1% config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected. -# 11 changes: Error parsing PrusaSlicer config file, it is probably corrupted. Try to manually delete the file to recover from the error. Your user profiles will not be affected. -# translation: Chyba při načítání konfiguračního souboru PrusaSliceru. Soubor je pravděpodobně poškozen. Zkuste soubor ručně smazat . Vaše uživatelské profily nebudou ovlivněny. -# 57 changes: Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to manually delete the file to recover from the error. -# translation: Chyba při zpracování konfiguračního souboru PrusaGCodeVieweru. Je pravděpodobně poškozený. Pro zotavení zkuste soubor ručně odstranit. +#: src/libslic3r/PrintConfig.cpp:2735 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for Sparse infill.\nCan be a % of the solid infill acceleration\nSet zero to use solid infill acceleration for infill. +# 38 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 50 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. +# 52 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. msgid "" -"Error parsing %1% config file, it is probably corrupted. Try to manually " -"delete the file to recover from the error. Your user profiles will not be " -"affected." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3119 -#Similar to me: Exact last layer height -# 8 changes: First layer height -# translation: Výška první vrstvy -# 8 changes: Initial layer height -# translation: Výška první vrstvy -# 9 changes: Variable layer height -# translation: Variabilní výška vrstvy -msgid "Exact last layer height" -msgstr "" - - -#: src/slic3r/GUI/ImGuiWrapper.cpp:1007 src/slic3r/GUI/Search.cpp:554 -#Similar to me: Exact pattern -# 5 changes: Fill pattern -# translation: Vzor výplně -msgid "Exact pattern" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:74 src/slic3r/GUI/PresetHints.cpp:114 -#: src/slic3r/GUI/PresetHints.cpp:131 -#, possible-boost-format -msgid "except for the first %1% layers where the fan is disabled" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:76 src/slic3r/GUI/PresetHints.cpp:116 -#: src/slic3r/GUI/PresetHints.cpp:133 -msgid "except for the first layer where the fan is disabled" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3736 -msgid "" -"Experimental option to remove perimeters where there is nothing under them " -"and where a bridged infill should be better. \n" -" * Remove perimeters: remove the unsupported perimeters, leave the bridge " -"area as-is.\n" -" * Keep only bridges: remove the perimeters in the bridge areas, keep only " -"bridges that end in solid area.\n" -" * Keep bridges and overhangs: remove the unsupported perimeters, keep only " -"bridges that end in solid area, fill the rest with overhang perimeters" -"+bridges.\n" -" * Fill the voids with bridges: remove the unsupported perimeters, draw " -"bridges over the whole hole.* !! this one can escalate to problems with " -"overhangs shaped like /\\, so you should use it only on one layer at a time " -"via the height-range modifier!\n" -"!!Computationally intensive!!. " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1363 -msgid "" -"Experimental option which modifies (in solid infill) fill flow to have the " -"exact amount of plastic inside the volume to fill (it generally changes the " -"flow from -7% to +4%, depending on the size of the surface to fill and the " -"overlap parameters, but it can go as high as +50% for infill in very small " -"areas where rectilinear doesn't have good coverage). It has the advantage to " -"remove the over-extrusion seen in thin infill areas, from the overlap ratio" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1875 -msgid "" -"Experimental setting. Fan speeds that are too high can clash with the " -"hotend's PID routine." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1868 -msgid "" -"Experimental setting. May enable the hotend to cool down faster during " -"toolchanges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1861 -msgid "" -"Experimental: drops nozzle temperature during cooling moves instead of prior " -"to extraction to reduce wait time." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1762 -msgid "" -"Export current configuration to file, with only settings compatible with " -"PrusaSlicer" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1762 -#Similar to me: Export to &Prusa Config -# 9 changes: Export &Config -# translation: Exportovat Konfigura&ci -msgid "Export to &Prusa Config" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1524 -msgid "ext peri first for inner side" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1516 -msgid "Ext peri first for outer side" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1431 -msgid "Ext. peri. cut corners" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1456 -msgid "Ext. peri. overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1467 src/libslic3r/PrintConfig.cpp:1481 -#Similar to me: External -# 3 changes: Material -# translation: Materiál -msgid "External" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: external perimeter -# 1 changes: External perimeter -# translation: Vnější perimetr -# 1 changes: external perimeters -# translation: vnější perimetry -# 2 changes: External perimeters -# translation: Vnější perimetry -msgid "external perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1468 -#Similar to me: External Perimeter acceleration -# 12 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -msgid "External Perimeter acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1441 -#Similar to me: External perimeter fan speed -# 8 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 9 changes: External perimeters -# translation: Vnější perimetry -# 10 changes: External perimeter -# translation: Vnější perimetr -msgid "External perimeter fan speed" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: External perimeter first -# 1 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 5 changes: External perimeters -# translation: Vnější perimetry -# 6 changes: External perimeter -# translation: Vnější perimetr -msgid "External perimeter first" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1455 -#Similar to me: external perimeter overlap -# 8 changes: external perimeters -# translation: vnější perimetry -# 8 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 9 changes: External perimeter -# translation: Vnější perimetr -msgid "external perimeter overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1504 -#Similar to me: External perimeters in vase mode -# 11 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 11 changes: Extra perimeters if needed -# translation: Extra perimetry (pokud jsou potřeba) -msgid "External perimeters in vase mode" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1414 -#Similar to me: External perimeters spacing -# 7 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 8 changes: External perimeters -# translation: Vnější perimetry -# 9 changes: External perimeter -# translation: Vnější perimetr -msgid "External perimeters spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1482 -#Similar to me: External perimeters speed -# 5 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 6 changes: External perimeters -# translation: Vnější perimetry -# 7 changes: External perimeter -# translation: Vnější perimetr -msgid "External perimeters speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1396 -#Similar to me: External perimeters width -# 4 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 6 changes: External perimeters -# translation: Vnější perimetry -# 7 changes: External perimeter -# translation: Vnější perimetr -msgid "External perimeters width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1555 -msgid "Extra perimeter on odd layers" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Extra perimeters -# 3 changes: External perimeters -# translation: Vnější perimetry -# 4 changes: External perimeter -# translation: Vnější perimetr -# 4 changes: external perimeters -# translation: vnější perimetry -msgid "Extra perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1532 -#Similar to me: Extra perimeters (do nothing) -# 10 changes: Extra perimeters if needed -# translation: Extra perimetry (pokud jsou potřeba) -msgid "Extra perimeters (do nothing)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1544 -#Similar to me: Extra perimeters over overhangs -# 12 changes: Extra perimeters if needed -# translation: Extra perimetry (pokud jsou potřeba) -msgid "Extra perimeters over overhangs" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4331 -msgid "Extra skirt lines on the first layer." -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l46 -msgid "Extra unretraction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5655 -msgid "Extra Wipe for external perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4223 -#Similar to me: Extrat length on toolchange restart -# 12 changes: Extra length on restart -# translation: Extra vzdálenost při návratu -msgid "Extrat length on toolchange restart" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3717 -msgid "" -"Extrude perimeters that have a part over an overhang in the reverse " -"direction on odd layers. This alternating pattern can drastically improve " -"steep overhang.\n" -"!! this is a very slow algorithm (it uses the same results as " -"extra_perimeters_overhangs) !!" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Extruder clearance (mm) -# 5 changes: Extruder clearance -# translation: Kolizní oblast extruderu -msgid "Extruder clearance (mm)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1599 -#Similar to me: Extruder clearance height -# 7 changes: Extruder clearance -# translation: Kolizní oblast extruderu -msgid "Extruder clearance height" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1613 -#Similar to me: Extruder clearance radius -# 7 changes: Extruder clearance -# translation: Kolizní oblast extruderu -msgid "Extruder clearance radius" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2697 -msgid "Extruder decimals" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1658 -#Similar to me: Extruder fan offset -# 4 changes: Extruder offset -# translation: Odsazení extruderu -msgid "Extruder fan offset" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2496 -#Similar to me: Extruder nozzle temperature for first layer. If you want to control temperature manually during print, set zero to disable temperature control commands in the output file. -# 27 changes: Nozzle temperature for the first layer. If you want to control temperature manually during print, set this to zero to disable temperature control commands in the output G-code. -# translation: Teplota trysky pro první vrstvu. Chcete-li během tisku ručně ovládat teplotu, nastavte tuto hodnotu na nulu, aby se ve výstupním G-codu neobjevily příkazy pro řízení teploty. -msgid "" -"Extruder nozzle temperature for first layer. If you want to control " -"temperature manually during print, set zero to disable temperature control " -"commands in the output file." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5093 -#Similar to me: Extruder nozzle temperature for layers after the first one. Set zero to disable temperature control commands in the output G-code. -# 18 changes: Nozzle temperature for layers after the first one. Set this to zero to disable temperature control commands in the output G-code. -# translation: Teplota trysky od druhé vrstvy dále. Nastavte tuto hodnotu na nulu, abyste zakázali příkazy pro řízení teploty ve výstupním G-codu. -# 33 changes: Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output. -# translation: Teplota tiskové podložky pro další vrstvy po první vrstvě. Nastavením na hodnotu nula vypnete ovládací příkazy teploty tiskové podložky ve výstupu. -# 51 changes: Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output. -# translation: Teplota vyhřívané tiskové podložky pro první vrstvu. Nastavením tuto hodnoty na nulu vypnete příkazy pro řízení teploty ve vrstvě ve výstupu. -msgid "" -"Extruder nozzle temperature for layers after the first one. Set zero to " -"disable temperature control commands in the output G-code." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1958 -msgid "Extruder retraction calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1647 -#Similar to me: Extruder temp offset -# 5 changes: Extruder offset -# translation: Odsazení extruderu -msgid "Extruder temp offset" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Extrusion direction -# 7 changes: Extrusion width -# translation: Šířka extruze -# 7 changes: Extrusion Width -# translation: Šíře extruze -msgid "Extrusion direction" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3453 -msgid "Extrusion section (mm³/mm)" -msgstr "" - - -#: src/libslic3r/GCode.cpp:789 -msgid "Extrusion type change G-code" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:251 src/slic3r/GUI/PresetHints.cpp:46 -msgid "Fan" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3178 -msgid "Fan KickStart time" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3464 -msgid "Fan PWM from 0-100" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Fan speed - default" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3159 -msgid "Fan startup delay" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:127 -#, possible-boost-format -msgid "fan will run by default to %1%%%" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1860 -msgid "Fast mode" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:247 -#Similar to me: Feature -# 2 changes: Texture -# translation: Textura -msgid "Feature" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1759 -#Similar to me: Filament color -# 4 changes: Filament notes -# translation: Poznámky k filamentu -# 5 changes: Filament type -# translation: Typ filamentu -# 5 changes: First color -# translation: První barva -msgid "Filament color" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2136 -#Similar to me: Filament cost -# 4 changes: Filament notes -# translation: Poznámky k filamentu -# 4 changes: Filament type -# translation: Typ filamentu -# 4 changes: Filaments -# translation: Filamenty -msgid "Filament cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1248 -#Similar to me: Filament end G-code -# 1 changes: Filament End G-code -# translation: Filament Konec G-code -# 5 changes: Filament Start G-code -# translation: Filament Začátek G-code -msgid "Filament end G-code" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1954 -msgid "Filament Flow calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4612 -#Similar to me: Filament start G-code -# 1 changes: Filament Start G-code -# translation: Filament Začátek G-code -# 5 changes: Filament End G-code -# translation: Filament Konec G-code -msgid "Filament start G-code" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1956 -msgid "Filament temperature calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2180 -#Similar to me: Fill -# 1 changes: File -# translation: Soubor -msgid "Fill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2181 -msgid "Fill angle increment" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1305 -msgid "" -"Fill pattern for bottom infill. This only affects the bottom visible layer, " -"and not its adjacent solid shells.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2234 -msgid "" -"Fill pattern for general low-density infill.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1333 -msgid "" -"Fill pattern for solid (internal) infill. This only affects the solid not-" -"visible layers. You should use rectilinear in most cases. You can try " -"ironing for translucent material. Rectilinear (filled) replaces zig-zag " -"patterns by a single big line & is more efficient for filling little " -"spaces.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1274 -msgid "" -"Fill pattern for top infill. This only affects the top visible layer, and " -"not its adjacent solid shells.\n" -"If you want an 'aligned' pattern, set 90° to the fill angle increment " -"setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3753 -msgid "Fill the voids with bridges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1531 -msgid "filling horizontal gaps on slopes" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Filtering -# 3 changes: Filter -# translation: Filtr -msgid "Filtering" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: first layer -# 1 changes: First layer -# translation: První vrstva -# 4 changes: First page -# translation: První stránka -msgid "first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2355 -#Similar to me: First layer acceleration -# 8 changes: First layer expansion -# translation: Rozšíření první vrstvy -msgid "First layer acceleration" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBedDialog.cpp:37 -#Similar to me: First layer calibration -# 8 changes: First layer expansion -# translation: Rozšíření první vrstvy -# 9 changes: First layer height -# translation: Výška první vrstvy -# 9 changes: First layer volumetric -# translation: Volumetrická hodnota první vrstvy -msgid "First layer calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1582 -#Similar to me: First layer extruder -# 7 changes: First layer expansion -# translation: Rozšíření první vrstvy -# 7 changes: First layer speed -# translation: Rychlost první vrstvy -# 8 changes: First layer density -# translation: Hustota první vrstvy -msgid "First layer extruder" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2292 -#Similar to me: First layer flow ratio -# 8 changes: First layer volumetric -# translation: Volumetrická hodnota první vrstvy -msgid "First layer flow ratio" -msgstr "" - - -#: src/libslic3r/Print.cpp:848 -#, possible-c-format, possible-boost-format -#Similar to me: First layer height can't be greater than %s -# 15 changes: First layer height can't be greater than nozzle diameter -# translation: Výška první vrstvy nesmí být větší než průměr trysky -msgid "First layer height can't be greater than %s" -msgstr "" - - -#: src/libslic3r/Print.cpp:835 -#, possible-c-format, possible-boost-format -msgid "First layer height can't be lower than %s" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2413 -#Similar to me: First layer spacing -# 5 changes: First layer speed -# translation: Rychlost první vrstvy -# 6 changes: First layer density -# translation: Hustota první vrstvy -# 6 changes: First layer expansion -# translation: Rozšíření první vrstvy -msgid "First layer spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2393 -#Similar to me: First layer width -# 5 changes: First layer height -# translation: Výška první vrstvy -# 5 changes: First layer speed -# translation: Rychlost první vrstvy -# 6 changes: Display width -# translation: Šířka displeje -msgid "First layer width" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:3026 -#Similar to me: Flat time compensation -# 7 changes: XY Size Compensation -# translation: Kompenzace XY rozměrů -msgid "Flat time compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6181 -msgid "Flexible" -msgstr "" - - -#: src/slic3r/GUI/CalibrationFlowDialog.cpp:42 -msgid "Flow calibration" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Flow ratio -# 2 changes: Flow rate -# translation: Průtok -msgid "Flow ratio" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:763 -msgid "" -"Flow ratio to compensate for the gaps in a bridged top surface. Used for " -"ironing infillpattern to prevent regions where the low-flow pass does not " -"provide a smooth surface due to a lack of plastic. You can increase it " -"slightly to pull the top layer at the correct height. Recommended maximum: " -"120%." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:563 -msgid "Focusing platter on mouse over" -msgstr "" - - -#: src/slic3r/GUI/UpdateDialogs.cpp:282 -#Similar to me: For more information please visit Prusa wiki page: -# 4 changes: For more information please visit our wiki page: -# translation: Pro více informací prosím navštivte naší wiki stránku: -msgid "For more information please visit Prusa wiki page:" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1937 -msgid "" -"For stock extruders, usually 40-42mm. For bondtech extruder upgrade, " -"usually 30-32mm. Start with a low value and gradually increase it until " -"strings are gone. If there are blobs on your wipe tower, your value is too " -"high." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:405 -#Similar to me: Format of G-code thumbnails -# 10 changes: G-code thumbnails -# translation: Náhledy G-codu -msgid "Format of G-code thumbnails" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:406 -msgid "" -"Format of G-code thumbnails: PNG for best quality, JPG for smallest size, " -"QOI for low memory firmware" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:477 -msgid "FreeCAD path" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1975 -msgid "FreeCad python script" -msgstr "" - - -#: src/slic3r/GUI/FreeCADDialog.cpp:138 -msgid "FreePySCAD : script engine for FreeCAD" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4346 -#Similar to me: from brim -# 3 changes: No brim -# translation: Bez límce -msgid "from brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4800 -#Similar to me: From filament -# 4 changes: Used filament -# translation: Použito filamentu -# 5 changes: filament -# translation: filament -# 5 changes: Filament -# translation: Filament -msgid "From filament" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4801 -msgid "From plane" -msgstr "" - -#: ../../ui_layout/default/milling.ui -#Similar to me: G-Code -# 1 changes: G-code -# translation: G-code -msgid "G-Code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5959 -msgid "G-Code to switch from this toolhead" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5945 -msgid "G-Code to switch to this toolhead" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Gap Fill -# 1 changes: Gap fill -# translation: Výplň tenkých stěn -msgid "Gap Fill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2566 -#Similar to me: Gap fill acceleration -# 8 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Gap fill acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2597 src/libslic3r/PrintConfig.cpp:2598 -msgid "Gap fill overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2611 -msgid "Gap fill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2580 -msgid "Gapfill after last perimeter" -msgstr "" - - -#: src/libslic3r/GCode.cpp:931 -msgid "Gcode done" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1879 -msgid "GCode Pre&view Tab" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Gcode precision -# 6 changes: G-code preview -# translation: Náhled G-codu -msgid "Gcode precision" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:362 src/slic3r/GUI/MainFrame.cpp:466 -#: src/slic3r/GUI/MainFrame.cpp:673 src/slic3r/GUI/MainFrame.cpp:716 -#Similar to me: Gcode preview -# 1 changes: G-code preview -# translation: Náhled G-codu -# 3 changes: &G-code Preview -# translation: &G-code Prohlížeč -msgid "Gcode preview" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "General wipe" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBedDialog.cpp:29 -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:73 -#: src/slic3r/GUI/CalibrationTempDialog.cpp:52 -#: src/slic3r/GUI/FreeCADDialog.cpp:261 -#Similar to me: Generate -# 2 changes: General -# translation: Obecné -# 3 changes: Generic -# translation: Obecný -msgid "Generate" -msgstr "" - - -#: src/slic3r/GUI/CalibrationFlowDialog.cpp:30 -#, possible-c-format, possible-boost-format -msgid "Generate 10% intervals around current value" -msgstr "" - - -#: src/slic3r/GUI/CalibrationFlowDialog.cpp:33 -#, possible-c-format, possible-boost-format -msgid "Generate 2% intervals below current value" -msgstr "" - - -#: src/libslic3r/Print.cpp:1132 -#Similar to me: Generating brim -# 4 changes: Generating pad -# translation: Generování podložky -# 6 changes: Generating G-code -# translation: Generování G-code -msgid "Generating brim" -msgstr "" - - -#: src/libslic3r/GCode.cpp:3261 -#, possible-c-format, possible-boost-format -msgid "Generating G-code layer %s / %s" -msgstr "" - - -#: src/libslic3r/PrintObject.cpp:369 -#, possible-c-format, possible-boost-format -msgid "Generating perimeters: layer %s / %s" -msgstr "" - - -#: src/libslic3r/Print.cpp:1075 -#Similar to me: Generating skirt -# 5 changes: Generating pad -# translation: Generování podložky -# 6 changes: Generating G-code -# translation: Generování G-code -msgid "Generating skirt" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2795 src/libslic3r/PrintConfig.cpp:2813 -#: src/libslic3r/PrintConfig.cpp:2831 src/libslic3r/PrintConfig.cpp:2849 -msgid "" -"Give to the infill algorithm if the infill needs to be connected, and on " -"which perimeters Can be useful for art or with high infill/perimeter " -"overlap. The result may vary between infill types." -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:43 -msgid "Goal:" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4744 -msgid "" -"Grey values means that they can't be send to your firmware (no g-code " -"available)." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:766 -msgid "Gui Colors" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6184 -msgid "Heat-resistant" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2382 -#Similar to me: Heated build plate temperature for the first layer. Set zero to disable bed temperature control commands in the output. -# 8 changes: Heated build plate temperature for the first layer. Set this to zero to disable bed temperature control commands in the output. -# translation: Teplota vyhřívané tiskové podložky pro první vrstvu. Nastavením tuto hodnoty na nulu vypnete příkazy pro řízení teploty ve vrstvě ve výstupu. -# 38 changes: Bed temperature for layers after the first one. Set this to zero to disable bed temperature control commands in the output. -# translation: Teplota tiskové podložky pro další vrstvy po první vrstvě. Nastavením na hodnotu nula vypnete ovládací příkazy teploty tiskové podložky ve výstupu. -msgid "" -"Heated build plate temperature for the first layer. Set zero to disable bed " -"temperature control commands in the output." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2313 -msgid "height in layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4356 -msgid "" -"Height of skirt expressed in layers. Set this to a tall value to use skirt " -"as a shield against drafts." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2243 -msgid "Help / Details:" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3548 -#Similar to me: Here you can put your personal notes. This text will be added to the G-code header comments. -# 11 changes: You can put here your personal notes. This text will be added to the G-code header comments. -# translation: Zde můžete zadat své osobní poznámky. Tento text bude přidán do komentáře záhlaví G code. -msgid "" -"Here you can put your personal notes. This text will be added to the G-code " -"header comments." -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui : l15 -msgid "horizontal" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:832 -#Similar to me: Horizontal width of the brim that will be printed around each object on the first layer.\nWhen raft is used, no brim is generated (use raft_first_layer_expansion). -# 7 changes: The horizontal width of the brim that will be printed around each object on the first layer. When raft is used, no brim is generated (use raft_first_layer_expansion). -# translation: Horizontální šířka límce, který bude vytištěn kolem každého objektu v první vrstvě. Při použití raftu se nevytvoří žádný límec (použijte raft_first_layer_expansion). -msgid "" -"Horizontal width of the brim that will be printed around each object on the " -"first layer.\n" -"When raft is used, no brim is generated (use raft_first_layer_expansion)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:842 -#Similar to me: Horizontal width of the brim that will be printed inside each object on the first layer. -# 22 changes: This flag enables the brim that will be printed around each object on the first layer. -# translation: Tato vlajka zapíná límec, který bude vytištěn kolem každého objektu při první vrstvě. -# 27 changes: The places where the brim will be printed around each object on the first layer. -# translation: Místa, kde bude kolem každého objektu v první vrstvě vytištěn límec. -msgid "" -"Horizontal width of the brim that will be printed inside each object on the " -"first layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4366 -msgid "" -"Horizontal width of the skirt that will be printed around each object. If " -"left as zero, first layer extrusion width will be used if set and the skirt " -"is only 1 layer height, or perimeter extrusion width will be used (using the " -"computed value if not set)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6511 -msgid "" -"How much the supports should lift up the supported object. If this value is " -"zero, the bottom of the model geometry will be considered as part of the pad." -"If \"Pad around object\" is enabled, this value is ignored." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3204 -msgid "" -"How to apply the Machine Limits.\n" -"* In every case, they will be used as safeguards: Even if you use a print " -"profile that sets an acceleration of 5000, if in your machine limits the " -"acceleration is 4000, the outputted gcode will use the 4000 limit.\n" -"* You can also use it as a safeguard and to have a better printing time " -"estimate.\n" -"* You can also use it as a safeguard, to have a better printing time " -"estimate and emit the limits at the begining of the gcode file, with M201 " -"M202 M203 M204 and M205 commands. If you want only to write a sub-set, " -"choose the 'for time estimate' option and write your own gcodes in the " -"custom gcode section." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4792 -msgid "" -"How to compute the vertical z-distance.\n" -"From filament: it uses the nearest bit of the filament. When a bridge is " -"extruded, it goes below the current plane.\n" -"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is " -"extruded.\n" -"None: No z-offset. Useful for Soluble supports.\n" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1977 -msgid "How to use the FreeCad python script window." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1948 -msgid "How to use this menu and calibrations." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5590 -msgid "Hyperbola" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:426 -msgid "Icon" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:494 -msgid "" -"Ideally, the spacing between two extrusions shouldn't be lower than the " -"nozzle diameter. Below are the extrusion widths for a spacing equal to the " -"nozzle diameter.\n" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "idx" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3501 -#, possible-c-format, possible-boost-format -msgid "" -"If a top surface has to be printed and it's partially covered by another " -"layer, it won't be considered at a top layer where its width is below this " -"value. This can be useful to not let the 'one perimeter on top' trigger on " -"surface that should be covered only by perimeters. This value can be a mm or " -"a % of the perimeter extrusion width." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5975 -msgid "" -"If activated, at the end of each layer, the printer will switch to a milling " -"head and mill the external perimeters.\n" -"You should set the 'Milling extra XY size' to a value high enough to have " -"enough plastic to mill. Also, be sure that your piece is firmly glued to the " -"bed." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:565 -msgid "" -"If disabled, moving the mouse over the platter panel will not change the " -"focus but some shortcuts from the platter may not work. If enabled, moving " -"the mouse over the platter panel will move focus there, and away from the " -"current control." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:385 -#, possible-boost-format -#Similar to me: If enabled, sets %1% as default application to open .gcode files. -# 16 changes: If enabled, sets PrusaSlicer as default application to open .3mf files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .3mf. -# 16 changes: If enabled, sets PrusaSlicer as default application to open .stl files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .stl. -# 25 changes: If enabled, sets PrusaSlicer G-code Viewer as default application to open .gcode files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .gcode. -msgid "If enabled, sets %1% as default application to open .gcode files." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:282 -#Similar to me: If enabled, sets Slic3r as default application to open .3mf files. -# 6 changes: If enabled, sets PrusaSlicer as default application to open .3mf files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .3mf. -# 9 changes: If enabled, sets PrusaSlicer as default application to open .stl files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .stl. -# 25 changes: If enabled, sets PrusaSlicer G-code Viewer as default application to open .gcode files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .gcode. -msgid "If enabled, sets Slic3r as default application to open .3mf files." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:289 -#Similar to me: If enabled, sets Slic3r as default application to open .stl files. -# 6 changes: If enabled, sets PrusaSlicer as default application to open .stl files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .stl. -# 9 changes: If enabled, sets PrusaSlicer as default application to open .3mf files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .3mf. -# 25 changes: If enabled, sets PrusaSlicer G-code Viewer as default application to open .gcode files. -# translation: Pokud je zašktnuto, PrusaSlicer bude výchozí aplikaci pro otevírání souborů .gcode. -msgid "If enabled, sets Slic3r as default application to open .stl files." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:8442 -#Similar to me: If enabled, the command line arguments are sent to an existing instance of GUI Slic3r, or an existing Slic3r window is activated. Overrides the \"single_instance\" configuration value from application preferences. -# 12 changes: If enabled, the command line arguments are sent to an existing instance of GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides the \"single_instance\" configuration value from application preferences. -# translation: Pokud je povoleno, argumenty příkazového řádku se odešlou do existující instance grafického uživatelského rozhraní PrusaSlicer,u nebo se aktivuje existující okno PrusaSlicer. Přepíše hodnotu konfigurace „single_instance“ z nastavení aplikace. -msgid "" -"If enabled, the command line arguments are sent to an existing instance of " -"GUI Slic3r, or an existing Slic3r window is activated. Overrides the " -"\"single_instance\" configuration value from application preferences." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:262 -msgid "" -"If enabled, the gui will be in expert mode even if the simple or advanced " -"mode is selected (but not the setting tabs)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2471 -#, possible-c-format, possible-boost-format -msgid "" -"If expressed as absolute value in mm/s, this speed will be applied as a " -"maximum for all infill print moves of the first layer.\n" -"If expressed as a percentage it will scale the current infill speed.\n" -"Set it at 100% to remove any infill first layer speed modification.\n" -"Set zero to disable (using first_layer_speed instead)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2445 -#, possible-c-format, possible-boost-format -msgid "" -"If expressed as absolute value in mm/s, this speed will be applied as a " -"maximum to all the print moves (but infill) of the first layer.\n" -"If expressed as a percentage it will scale the current speed.\n" -"Set it at 100% to remove any first layer speed modification (but for infill)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2457 -#Similar to me: If expressed as absolute value in mm/s, this speed will be usedf as a max over all the print moves of the first object layer above raft interface, regardless of their type.\nIf expressed as a percentage it will scale the current speed (max 100%).\nSet it at 100% to remove this speed modification. -# 92 changes: If expressed as absolute value in mm/s, this speed will be applied to all the print moves of the first object layer above raft interface, regardless of their type. If expressed as a percentage (for example: 40%) it will scale the default speeds. -# translation: Pokud je vyjádřena jako absolutní hodnota v mm / s, bude tato rychlost použita pro všechny pohyby tisku první vrstvy nad raftem bez ohledu na jejich typ. Pokud je hodnota vyjádřena procenty (například: 40%), změní v závislosti na výchozích rychlostech. -msgid "" -"If expressed as absolute value in mm/s, this speed will be usedf as a max " -"over all the print moves of the first object layer above raft interface, " -"regardless of their type.\n" -"If expressed as a percentage it will scale the current speed (max 100%).\n" -"Set it at 100% to remove this speed modification." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:479 -msgid "" -"If it point to a valid freecad instance (the bin directory or the python " -"executable), you can use the built-in python script to quickly generate " -"geometry." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1747 -#Similar to me: If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the default and maximum speeds.\nSet zero to disable. -# 29 changes: If layer print time is estimated below this number of seconds, fan will be enabled and its speed will be calculated by interpolating the minimum and maximum speeds. -# translation: Pokud je doba tisku vrstvy odhadnuta jako kratší než tato nastavená hodnota ve vteřinách, ventilátor bude aktivován a jeho rychlost bude vypočtena interpolací minimální a maximální rychlosti. -msgid "" -"If layer print time is estimated below this number of seconds, fan will be " -"enabled and its speed will be calculated by interpolating the default and " -"maximum speeds.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4406 -#Similar to me: If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value, if possible.\nSet zero to disable. -# 35 changes: If layer print time is estimated below this number of seconds, print moves speed will be scaled down to extend duration to this value. -# translation: Pokud je doba tisku vrstvy odhadnuta kratší než tento počet sekund, rychlost tisku se zpomalí, aby se prodloužila doba tisku této vrstvy. -msgid "" -"If layer print time is estimated below this number of seconds, print moves " -"speed will be scaled down to extend duration to this value, if possible.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5398 -msgid "" -"If selected, the deceleration of a travel will use the acceleration value of " -"the extrusion that will be printed after it (if any) " -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2263 -msgid "" -"If the perimeter overlap is set at 100%, the yellow areas should be filled " -"by the overlap.\n" -"If overlap is at 0%, width = spacing." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1738 -msgid "" -"If this is enabled, fan will continuously run at base speed if no other " -"setting overrides that speed. Useful for PLA, harmful for ABS." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:315 -msgid "" -"If this is enabled, Slic3r will prompt for when overwriting files from save " -"dialogs." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:328 -#Similar to me: If this is enabled, when starting Slic3r and another instance of the same Slic3r is already running, that instance will be reactivated instead. -# 12 changes: If this is enabled, when starting PrusaSlicer and another instance of the same PrusaSlicer is already running, that instance will be reactivated instead. -# translation: Pokud je tato možnost povolena, tak v případě již běžícího PrusaSliceru bude při pokusu spuštění dalšího PrusaSliceru aktivována právě tato instance. -msgid "" -"If this is enabled, when starting Slic3r and another instance of the same " -"Slic3r is already running, that instance will be reactivated instead." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3629 -msgid "" -"If you have some problem with the 'Only one perimeter on Top surfaces' " -"option, you can try to activate this on the problematic layer." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:793 -#, possible-c-format, possible-boost-format -msgid "" -"If you use a color with higher than 80% saturation and/or value, these will " -"be increased. If lower, they will be decreased." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3347 -msgid "" -"If your firmware stops while printing, it may have its gcode queue full. Set " -"this parameter to merge extrusions into bigger ones to reduce the number of " -"gcode commands the printer has to process each second.\n" -"On 8bit controlers, a value of 150 is typical.\n" -"Note that reducing your printing speed (at least for the external " -"extrusions) will reduce the number of time this will triggger and so " -"increase quality.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2633 -msgid "Illegal characters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2634 -msgid "Illegal characters for filename" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1709 -#Similar to me: Import Prusa Config -# 6 changes: Import &Config -# translation: Importovat Konfigura&ci -msgid "Import Prusa Config" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1719 -#Similar to me: Import Prusa Config Bundle -# 7 changes: Import Config &Bundle -# translation: Importovat Konfigurační &Balík -# 9 changes: Export Config &Bundle -# translation: Exportovat Konfigurační &Balík -msgid "Import Prusa Config Bundle" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:83 -#Similar to me: Import STL/OBJ/AMF/3MF without config, keep platter -# 1 changes: Import STL/OBJ/AMF/3MF without config, keep plater -# translation: Importovat STL/OBJ/AMF/3MF bez konfigurace, zachová stávající podložku -# 17 changes: Open project STL/OBJ/AMF/3MF with config, clear plater -# translation: Otevřít projekt STL/OBJ/AMF/3MF s konfigurací, odstranit modely na podložce -msgid "Import STL/OBJ/AMF/3MF without config, keep platter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4700 -msgid "" -"In sloping areas, when you have a number of top / bottom solid layers and " -"few perimeters, it may be necessary to put some solid infill above/below " -"the perimeters to fulfill the top/bottom layers criteria.\n" -"By setting this to something higher than 0, you can control this behaviour, " -"which might be desirable if \n" -"undesirable solid infill is being generated on slopes.\n" -"The number set here indicates the number of layers between the inside of the " -"part and the air at and beyond which solid infill should no longer be added " -"above/below. If this setting is equal or higher than the top/bottom solid " -"layer count, it won't do anything. If this setting is set to 1, it will " -"evict all solid fill above/below perimeters. \n" -"Set zero to disable.\n" -"!! ensure_vertical_shell_thickness needs to be activated so this algorithm " -"can work !!." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1503 -msgid "In vase mode (no seam)" -msgstr "" - -#: ../../ui_layout/default/print.ui : l171 -msgid "increment" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2720 -#Similar to me: Infill acceleration -# 7 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Infill acceleration" -msgstr "" - -#: ../../ui_layout/default/filament.ui : l35 -#Similar to me: Infill bridges -# 5 changes: Thick bridges -# translation: Silné přemostění -msgid "Infill bridges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:706 -#Similar to me: Infill bridges fan speed -# 8 changes: Bridges fan speed -# translation: Rychlost ventilátoru při vytváření mostů -msgid "Infill bridges fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2469 -msgid "Infill max first layer speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2923 -msgid "Infill spacing" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Infill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2904 -msgid "Infill width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2954 -#Similar to me: Infill/perimeters encroachment -# 10 changes: Infill/perimeters overlap -# translation: Přesah pro výplň/perimetry -msgid "Infill/perimeters encroachment" -msgstr "" - - -#: src/libslic3r/PrintObject.cpp:553 src/libslic3r/PrintObject.cpp:574 -#, possible-c-format, possible-boost-format -#Similar to me: Infilling layer %s / %s -# 7 changes: Infilling layers -# translation: Generování výplně vrstev -msgid "Infilling layer %s / %s" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5684 -#Similar to me: Inner -# 2 changes: Enter -# translation: Enter -# 2 changes: Index -# translation: Rejstřík -# 2 changes: Insert -# translation: Insert -msgid "Inner" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5685 -#Similar to me: Inner XY size compensation -# 8 changes: XY Size Compensation -# translation: Kompenzace XY rozměrů -msgid "Inner XY size compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1936 -msgid "Insertion distance" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4744 src/libslic3r/PrintConfig.cpp:4969 -msgid "Interface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:840 -msgid "Interior Brim width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3776 src/libslic3r/PrintConfig.cpp:3899 -#Similar to me: Internal -# 3 changes: Material -# translation: Materiál -msgid "Internal" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:284 src/libslic3r/ExtrusionEntity.cpp:286 -#: src/libslic3r/ExtrusionEntity.cpp:321 -#Similar to me: Internal bridge infill -# 7 changes: Internal infill -# translation: Vnitřní výplň -msgid "Internal bridge infill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:812 -msgid "Internal bridge speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:811 -msgid "Internal bridges" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:667 -msgid "Internal bridges " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:668 -msgid "Internal bridges acceleration" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/ExtrusionEntity.cpp:278 -#: src/libslic3r/ExtrusionEntity.cpp:305 -#Similar to me: Internal perimeter -# 2 changes: External perimeter -# translation: Vnější perimetr -# 3 changes: external perimeters -# translation: vnější perimetry -# 3 changes: External perimeters -# translation: Vnější perimetry -msgid "Internal perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3777 -msgid "Internal Perimeter acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3900 -#Similar to me: Internal perimeters speed -# 7 changes: External perimeters first -# translation: Nejprve tisknout vnější perimetry -# 8 changes: external perimeters -# translation: vnější perimetry -# 8 changes: External perimeters -# translation: Vnější perimetry -msgid "Internal perimeters speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3892 -msgid "" -"Internal perimeters will go around sharp corners by turning around instead " -"of making the same sharp corner. This can help when there are visible holes " -"in sharp corners on perimeters. It also help to print the letters on the " -"benchy stern.\n" -"Can incur some more processing time, and corners are a bit less sharp." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4078 -msgid "Internal resolution" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1948 -msgid "Introduction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3022 -#Similar to me: Ironing acceleration -# 8 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Ironing acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3035 -#Similar to me: Ironing angle -# 4 changes: Bridging angle -# translation: Úhel vytváření mostů -# 4 changes: Ironing Type -# translation: Způsob vyhlazování -msgid "Ironing angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3037 -msgid "Ironing angle. if negative, it will use the fill angle." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2342 -msgid "Ironing flow distribution" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Ironing infill pattern tuning" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1963 -msgid "Ironing pattern calibration" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Ironing post-process (This will go on top of infills and perimeters)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3079 -#Similar to me: Ironing speed -# 4 changes: Ironing Type -# translation: Způsob vyhlazování -# 4 changes: Loading speed -# translation: Rychlost zavádění -# 4 changes: Print speed -# translation: Rychlost tisku -msgid "Ironing speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3081 -msgid "" -"Ironing speed. Used for the ironing pass of the ironing infill pattern, and " -"the post-process infill.\n" -"This can be expressed as a percentage (for example: 80%) over the Top Solid " -"Infill speed.\n" -"Ironing extrusions are ignored from the automatic volumetric speed " -"computation." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2327 -#Similar to me: Ironing width -# 5 changes: Brim width -# translation: Šířka límce -# 5 changes: Ironing Type -# translation: Způsob vyhlazování -# 5 changes: Min width -# translation: Min šířka -msgid "Ironing width" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:807 -msgid "" -"It can be a good idea to use a bit darker color, as some hues can be a bit " -"difficult to read." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:779 -msgid "" -"It may need a lighter color, as it's used to replace white on top of a dark " -"background." -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:224 -msgid "" -"It's not possible to use a bigger value for the brim offset than the brim " -"width, as it won't extrude anything. Brim offset have to be lower than the " -"brim width." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3857 -msgid "" -"Join the perimeters to create only one continuous extrusion without any z-" -"hop. Long inside travel (from external to holes) are not extruded to give " -"some space to the infill." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3752 -msgid "Keep bridges and overhangs" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:736 -msgid "Keep current flow" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3751 -msgid "Keep only bridges" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui : l40 -msgid "Kickstart duration" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Layer count" -msgstr "" - - -#: src/libslic3r/Print.cpp:867 -#, possible-c-format, possible-boost-format -msgid "Layer height can't be greater than %s" -msgstr "" - - -#: src/libslic3r/Print.cpp:854 -#, possible-c-format, possible-boost-format -msgid "Layer height can't be lower than %s" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1876 -msgid "Layer previe&w Tab" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3449 -#Similar to me: Layer Time -# 4 changes: Paper size -# translation: Velikost papíru -msgid "Layer Time" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:253 -#Similar to me: Layer time -# 4 changes: Paper size -# translation: Velikost papíru -msgid "Layer time" -msgstr "" - - -#: src/slic3r/GUI/GCodeViewer.cpp:3450 -msgid "Layer Time (log)" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:254 -msgid "Layer time (log)" -msgstr "" - -#: ../../ui_layout/default/filament.ui : l48 -msgid "Layer time goal" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1087 src/slic3r/GUI/Preferences.cpp:1105 -msgid "Layout with the tab bar" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1088 src/slic3r/GUI/Preferences.cpp:1106 -msgid "Legacy layout" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1180 -msgid "Legend" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4196 -msgid "Lift only on" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "Lift z enforcement" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2925 -msgid "" -"Like First layer width but spacing is the distance between two lines (as " -"they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2415 -msgid "" -"Like First layer width but spacing is the distance between two lines (as " -"they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3839 -msgid "" -"Like Perimeter width but spacing is the distance between two perimeter lines " -"(as they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4519 -msgid "" -"Like Solid infill width but spacing is the distance between two lines (as " -"they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1416 -msgid "" -"Like the External perimeters width, but this value is the distance between " -"the edge and the 'frontier' to the next perimeter.\n" -"Setting the spacing will deactivate the width setting, and vice versa.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5315 -msgid "" -"Like Top solid infill width but spacing is the distance between two lines " -"(as they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5588 -#Similar to me: Linear -# 2 changes: Line -# translation: Čára -msgid "Linear" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4332 -#Similar to me: lines -# 2 changes: Files -# translation: Soubory -# 2 changes: Line -# translation: Čára -# 2 changes: files -# translation: soubory -msgid "lines" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1709 -msgid "Load configuration file exported from PrusaSlicer" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1719 -#Similar to me: Load presets from a PrusaSlicer bundle -# 12 changes: Load presets from a bundle -# translation: Načíst přednastavení z balíku -msgid "Load presets from a PrusaSlicer bundle" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4913 -#Similar to me: LOCKED LOCK icon indicates that the values this widget control are all the same as the system (or default) values. -# 27 changes: LOCKED LOCK icon indicates that the value is the same as the system (or default) value. -# translation: Ikona ZAMKNUTÉHO ZÁMKU indikuje, že hodnota je shodná se systémovou (výchozí) hodnotou. -msgid "" -"LOCKED LOCK icon indicates that the values this widget control are all the " -"same as the system (or default) values." -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:254 -msgid "Log time" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1053 -msgid "lowest Y" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1054 -msgid "lowest Z" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3146 -msgid "M117" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3147 -msgid "M73" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3148 -msgid "M73 & M117" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3136 -#Similar to me: M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode.\nM117: Send a command to display a message to the printer, this is 'Time Left .h..m..s'. -# 98 changes: Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute intervals into the G-code to let the firmware show accurate remaining time. As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 firmware supports M73 Qxx Sxx for the silent mode. -# translation: Vkládání M73 P[počet vytištěných procent] R[zbývající čas v minutách] v 1 minutových intervalech do G-codu, aby firmware ukázal přesný zbývající čas. M73 nyní rozpoznává pouze firmware tiskárny Prusa i3 MK3. Firmware i3 MK3 také podporuje M73 Qxx Sxx pro tichý režim. -msgid "" -"M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute " -"intervals into the G-code to let the firmware show accurate remaining time. " -"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " -"firmware supports M73 Qxx Sxx for the silent mode.\n" -"M117: Send a command to display a message to the printer, this is 'Time " -"Left .h..m..s'." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:3032 -#Similar to me: Machine Limits -# 1 changes: Machine limits -# translation: Limity stroje -msgid "Machine Limits" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4757 -msgid "Machine limits are disabled. They are not used for anything." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4753 -msgid "Machine limits are used as safegard when generating gcode" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4740 -msgid "" -"Machine limits will be emitted to G-code and used to estimate print time. " -"They are also used as safegard when generating gcode" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4747 -#Similar to me: Machine limits will NOT be emitted to G-code, however they will be used to estimate print time, which may therefore not be accurate as the printer may apply a different set of machine limits. They are also used as safegard when generating gcode -# 53 changes: Machine limits will NOT be emitted to G-code, however they will be used to estimate print time, which may therefore not be accurate as the printer may apply a different set of machine limits. -# translation: Limity stroje NEBUDOU aplikovány do G-codu, ale budou použity k odhadu doby tisku, což však nemusí být přesné, protože tiskárna může použít jinou sadu limitů. -msgid "" -"Machine limits will NOT be emitted to G-code, however they will be used to " -"estimate print time, which may therefore not be accurate as the printer may " -"apply a different set of machine limits. They are also used as safegard when " -"generating gcode" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:792 -msgid "Main color template." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:260 -msgid "Main GUI always in expert mode" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:790 -msgid "Main Gui color template" -msgstr "" - - -#: src/slic3r/GUI/AboutDialog.cpp:278 -msgid "Manual by Gary Hodgson. Inspired by the RepRap community." -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1179 -msgid "Marker" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6732 -msgid "Masked CWS" -msgstr "" - -#: ../../ui_layout/default/sla_material.ui -msgid "material_correction" -msgstr "" - - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:78 -#, possible-c-format, possible-boost-format -msgid "max %s version" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:857 -msgid "Max angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:786 -#Similar to me: Max bridge density -# 4 changes: Max bridge length -# translation: Maximální délka mostu -msgid "Max bridge density" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3358 -#Similar to me: Max fan speed -# 4 changes: Max print speed -# translation: Maximální rychlost tisku -# 5 changes: Fan speed -# translation: Rychlost ventilátoru -msgid "Max fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2468 -#Similar to me: Max infill -# 4 changes: Gap fill -# translation: Výplň tenkých stěn -# 4 changes: infill -# translation: výplň -msgid "Max infill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3370 -#Similar to me: Max layer height -# 5 changes: First layer height -# translation: Výška první vrstvy -# 5 changes: Layer height -# translation: Výška vrstvy -# 5 changes: Max print height -# translation: Maximální výška tisku -msgid "Max layer height" -msgstr "" - - -#: src/libslic3r/Print.cpp:824 -#Similar to me: Max layer height can't be greater than nozzle diameter -# 5 changes: First layer height can't be greater than nozzle diameter -# translation: Výška první vrstvy nesmí být větší než průměr trysky -# 5 changes: Layer height can't be greater than nozzle diameter -# translation: Výška vrstvy nemůže být větší než je průměr trysky -msgid "Max layer height can't be greater than nozzle diameter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4444 -#Similar to me: Max length -# 4 changes: Max height: -# translation: Max šířka: -msgid "Max length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2074 -msgid "Max line overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3387 -msgid "Max print speed for Autospeed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4445 -msgid "Max small perimeters length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1801 -#Similar to me: Max speed -# 2 changes: Fan speed -# translation: Rychlost ventilátoru -msgid "Max speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2455 -#Similar to me: Max speed of object first layer over raft interface -# 5 changes: Speed of object first layer over raft interface -# translation: Rychlost první vrstvy objektu nad raftem -# 17 changes: First object layer over raft interface -# translation: První vrstva objektu nad raftem -msgid "Max speed of object first layer over raft interface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1825 -msgid "Max speed on the wipe tower" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3400 -msgid "Max speed reduction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5490 -msgid "Max Wipe deviation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3338 -#Similar to me: Maximum acceleration when travelling (M204 T) -# 7 changes: Maximum acceleration when retracting (M204 R) -# translation: Maximální zrychlení při retrakci (M204 R) -# 10 changes: Maximum acceleration for travel moves (M204 T) -# translation: Maximální zrychlení pro posuny (M204 T) -# 15 changes: Maximum acceleration when retracting -# translation: Maximální zrychlení při retrakci -msgid "Maximum acceleration when travelling (M204 T)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:860 -msgid "" -"Maximum angle to let a brim ear appear. \n" -"If set to 0, no brim will be created. \n" -"If set to ~178, brim will be created on everything but straight sections." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5710 -msgid "" -"Maximum area for the hole where the hole_size_compensation will apply fully. " -"After that, it will decrease down to 0 for four times this area. Set to 0 to " -"let the hole_size_compensation apply fully for all detected holes" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5731 -#, possible-c-format, possible-boost-format -msgid "" -"Maximum defection of a point to the estimated radius of the circle.\n" -"As cylinders are often exported as triangles of varying size, points may not " -"be on the circle circumference. This setting allows you some leway to " -"broaden the detection.\n" -"In mm or in % of the radius." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:789 -msgid "" -"Maximum density for bridge lines. If you want more space between line (or " -"less), you can modify it. A value of 50% will create two times less lines, " -"and a value of 200% will create two time more lines that overlap each other." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1136 -msgid "" -"Maximum distance between two points to allow adding new ones. Allow to avoid " -"distorting long strait areas.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3345 -msgid "Maximum G1 per second" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1803 -#Similar to me: Maximum speed allowed for this filament. Limits the maximum speed of a print to the minimum of the print speed and the filament speed. Set zero for no limit. -# 48 changes: Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit. -# translation: Maximální povolený objem průtoku pro tento filament. Omezuje maximální rychlost průtoku pro tisk až na minimální rychlost průtoku pro tisk a filament. Zadejte nulu pro nastavení bez omezení. -msgid "" -"Maximum speed allowed for this filament. Limits the maximum speed of a print " -"to the minimum of the print speed and the filament speed. Set zero for no " -"limit." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1815 -#Similar to me: Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set zero for no limit. -# 3 changes: Maximum volumetric speed allowed for this filament. Limits the maximum volumetric speed of a print to the minimum of print and filament volumetric speed. Set to zero for no limit. -# translation: Maximální povolený objem průtoku pro tento filament. Omezuje maximální rychlost průtoku pro tisk až na minimální rychlost průtoku pro tisk a filament. Zadejte nulu pro nastavení bez omezení. -msgid "" -"Maximum volumetric speed allowed for this filament. Limits the maximum " -"volumetric speed of a print to the minimum of print and filament volumetric " -"speed. Set zero for no limit." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5491 -msgid "Maximum Wipe deviation to the inside" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6439 -#Similar to me: Merging bridges or pillars into other pillars can increase the radius. Zero means no increase, one means full increase. -# 2 changes: Merging bridges or pillars into another pillars can increase the radius. Zero means no increase, one means full increase. -# translation: Sloučení mostů nebo podpěr do jiných podpěr může zvýšit poloměr. Hodnota 0 znamená žádné zvýšení, hodnota 1 znamená maximální zvýšení. -msgid "" -"Merging bridges or pillars into other pillars can increase the radius. Zero " -"means no increase, one means full increase." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5175 -msgid "Merging with perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3133 -msgid "Method" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:291 src/libslic3r/ExtrusionEntity.cpp:293 -#: src/libslic3r/ExtrusionEntity.cpp:335 -msgid "Mill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5891 -msgid "Milling cutter" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2414 -msgid "Milling cutters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5907 -#Similar to me: Milling diameter -# 4 changes: Pillar diameter -# translation: Průměr podpěry -# 6 changes: Hole diameter -# translation: Průměr otvoru -msgid "Milling diameter" -msgstr "" - - -#: src/libslic3r/GCode.cpp:818 -#Similar to me: Milling End G-code -# 5 changes: Filament End G-code -# translation: Filament Konec G-code -msgid "Milling End G-code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5981 -msgid "Milling extra XY size" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5992 -msgid "Milling only after" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5973 -msgid "Milling post-processing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6002 -#Similar to me: Milling Speed -# 4 changes: Filling bed -# translation: Vyplňování podložky -# 5 changes: Loading speed -# translation: Rychlost zavádění -msgid "Milling Speed" -msgstr "" - - -#: src/libslic3r/GCode.cpp:811 -#Similar to me: Milling Start G-code -# 5 changes: Filament Start G-code -# translation: Filament Začátek G-code -# 8 changes: Start G-code -# translation: Začátek G-code -msgid "Milling Start G-code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1893 src/libslic3r/PrintConfig.cpp:1902 -msgid "milliseconds" -msgstr "" - - -#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:76 -#, possible-c-format, possible-boost-format -msgid "min %s version" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:773 -#Similar to me: Min bridge density -# 6 changes: Max bridge length -# translation: Maximální délka mostu -msgid "Min bridge density" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1103 -msgid "Min concave angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1088 -msgid "Min convex angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2483 -#Similar to me: Min first layer speed -# 5 changes: First layer speed -# translation: Rychlost první vrstvy -msgid "Min first layer speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3189 -msgid "Min height for travel" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3473 -#Similar to me: Min layer height -# 4 changes: First layer height -# translation: Výška první vrstvy -# 5 changes: Display height -# translation: Výška displeje -# 5 changes: Layer height -# translation: Výška vrstvy -msgid "Min layer height" -msgstr "" - - -#: src/libslic3r/Print.cpp:823 -#Similar to me: Min layer height can't be greater than Max layer height -# 18 changes: First layer height can't be greater than nozzle diameter -# translation: Výška první vrstvy nesmí být větší než průměr trysky -# 19 changes: Layer height can't be greater than nozzle diameter -# translation: Výška vrstvy nemůže být větší než je průměr trysky -msgid "Min layer height can't be greater than Max layer height" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4430 -#Similar to me: Min length -# 4 changes: Min width -# translation: Min šířka -# 4 changes: Min height: -# translation: Min výška: -msgid "Min length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4431 -msgid "Min small perimeters length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2587 -msgid "Min surface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2588 -msgid "Min surface for gap filling" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1106 -msgid "" -"Minimum (concave) angle at a vertex to enable smoothing (trying to create a " -"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " -"be smoothened." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1091 -msgid "" -"Minimum (convex) angle at a vertex to enable smoothing (trying to create a " -"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " -"be smoothened." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:776 -#, possible-c-format, possible-boost-format -msgid "" -"Minimum density for bridge lines. If Lower than bridge_overlap, then the " -"overlap value can be lowered automatically down to this value. If the value " -"is higher, this parameter has no effect.\n" -"Default to 87.5% to allow a little void between the lines." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4080 -msgid "" -"Minimum detail resolution, used for internal structures (gapfill and some " -"infill patterns).\n" -"Don't put a too-small value (0.05mm is way too low for many printers), as it " -"may create too many very small segments that may be difficult to display and " -"print." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4052 -#Similar to me: Minimum detail resolution, used to simplify the input file for speeding up the slicing job and reducing memory usage. High-resolution models often carry more details than printers can render. Set zero to disable any simplification and use full resolution from input. \nNote: Slic3r has an internal working resolution of 0.0001mm.\nInfill & Thin areas are simplified up to 0.0125mm. -# 119 changes: Minimum detail resolution, used to simplify the input file for speeding up the slicing job and reducing memory usage. High-resolution models often carry more detail than printers can render. Set to zero to disable any simplification and use full resolution from input. -# translation: Minimální rozlišení detailů, které se používají pro zjednodušení vstupního souboru pro urychlení slicovací úlohy a snížení využití paměti. Modely s vysokým rozlišením často obsahují více detailů než tiskárny dokážou vykreslit. Nastavte na nulu, chcete-li zakázat jakékoli zjednodušení a použít vstup v plném rozlišení. -msgid "" -"Minimum detail resolution, used to simplify the input file for speeding up " -"the slicing job and reducing memory usage. High-resolution models often " -"carry more details than printers can render. Set zero to disable any " -"simplification and use full resolution from input. \n" -"Note: Slic3r has an internal working resolution of 0.0001mm.\n" -"Infill & Thin areas are simplified up to 0.0125mm." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3487 -msgid "Minimum extrusion length" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6739 -msgid "Minimum resolution in nanometers" -msgstr "" - -#: ../../ui_layout/default/extruder.ui : l45 -#Similar to me: Minimum retraction -# 7 changes: Minimum feedrates -# translation: Minimální rychlosti posuvu -msgid "Minimum retraction" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2485 -msgid "" -"Minimum speed when printing the first layer.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3499 -msgid "Minimum top width for infill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3692 -#, possible-c-format, possible-boost-format -msgid "" -"Minimum unsupported width for an extrusion to apply the bridge fan & " -"overhang speed to this overhang. Can be in mm or in a % of the nozzle " -"diameter. Set to 0 to deactivate overhangs." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3704 -#, possible-c-format, possible-boost-format -msgid "" -"Minimum unsupported width for an extrusion to apply the bridge flow to this " -"overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to " -"deactivate bridge flow for overhangs." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6140 -#Similar to me: minimum width -# 5 changes: Brim width -# translation: Šířka límce -# 5 changes: Min width -# translation: Min šířka -# 5 changes: Pinhead width -# translation: Šířka podpěrného hrotu -msgid "minimum width" -msgstr "" - -#: ../../ui_layout/default/print.ui : l29 -#Similar to me: Minimum width -# 4 changes: Min width -# translation: Min šířka -# 5 changes: Brim width -# translation: Šířka límce -# 5 changes: Pinhead width -# translation: Šířka podpěrného hrotu -msgid "Minimum width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5154 -msgid "" -"Minimum width for the extrusion to be extruded (widths lower than the nozzle " -"diameter will be over-extruded at the nozzle diameter). If expressed as " -"percentage (for example 110%) it will be computed over nozzle diameter. The " -"default behavior of PrusaSlicer is with a 33% value. Put 100% to avoid any " -"sort of over-extrusion." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6142 -#Similar to me: Minimum width of features to maintain when doing the first layer compensation. -# 12 changes: Minimum width of features to maintain when doing elephant foot compensation. -# translation: Minimální šířka prvků, které je třeba zachovat při provádění kompenzace rozplácnutí první vrstvy. -msgid "" -"Minimum width of features to maintain when doing the first layer " -"compensation." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2337 -#Similar to me: mm/% -# 1 changes: mm/s -# translation: mm/s -msgid "mm/%" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1181 -msgid "mm/s for %-based speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1911 src/libslic3r/PrintConfig.cpp:1920 -#Similar to me: mm/sec -# 2 changes: mm/s -# translation: mm/s -# 2 changes: mm/s² -# translation: mm/s² -msgid "mm/sec" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:659 src/libslic3r/PrintConfig.cpp:673 -#: src/libslic3r/PrintConfig.cpp:874 src/libslic3r/PrintConfig.cpp:1152 -#: src/libslic3r/PrintConfig.cpp:1473 src/libslic3r/PrintConfig.cpp:2360 -#: src/libslic3r/PrintConfig.cpp:2571 src/libslic3r/PrintConfig.cpp:2725 -#: src/libslic3r/PrintConfig.cpp:3027 src/libslic3r/PrintConfig.cpp:3668 -#: src/libslic3r/PrintConfig.cpp:3782 src/libslic3r/PrintConfig.cpp:4687 -#: src/libslic3r/PrintConfig.cpp:4728 src/libslic3r/PrintConfig.cpp:4750 -#: src/libslic3r/PrintConfig.cpp:5190 src/libslic3r/PrintConfig.cpp:5334 -#: src/libslic3r/PrintConfig.cpp:5387 -#Similar to me: mm/s² or % -# 1 changes: mm/s or % -# translation: mm/s nebo % -# 3 changes: mm or % -# translation: mm nebo % -msgid "mm/s² or %" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5555 src/libslic3r/PrintConfig.cpp:5572 -#Similar to me: mm3 -# 1 changes: mm -# translation: mm -# 1 changes: mm² -# translation: mm² -# 1 changes: mm³ -# translation: mm³ -msgid "mm3" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3533 src/libslic3r/PrintConfig.cpp:3534 -msgid "Model rounding precision" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Modifying slices" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1290 src/libslic3r/PrintConfig.cpp:1320 -#: src/libslic3r/PrintConfig.cpp:1351 -msgid "Monotonic (filled)" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1980 -msgid "Mosaic from picture" -msgstr "" - - -#: src/slic3r/GUI/GUI.cpp:350 -#, possible-boost-format -#Similar to me: Most likely the configuration was produced by a newer version of %1% or PrusaSlicer. -# 24 changes: Most likely the configuration was produced by a newer version of PrusaSlicer or by some PrusaSlicer fork. -# translation: Konfiguraci pravděpodobně vytvořila novější verze programu PrusaSlicer nebo nějaký fork PrusaSliceru. -msgid "" -"Most likely the configuration was produced by a newer version of %1% or " -"PrusaSlicer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3161 -msgid "" -"Move the fan start in the past by at least this delay (in seconds, you can " -"use decimals). It assumes infinite acceleration for this time estimation, " -"and will only take into account G1 and G0 moves.\n" -"It won't move fan comands from custom gcodes (they act as a sort of " -"'barrier').\n" -"It won't move fan comands into the start gcode if the 'only custom start " -"gcode' is activated.\n" -"Use 0 to deactivate." -msgstr "" - -#: ../../ui_layout/default/filament.ui -#Similar to me: Multimaterial -# 5 changes: Material -# translation: Materiál -# 5 changes: SLA material -# translation: SLA materiál -msgid "Multimaterial" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Multimaterial toolchange string reduction" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Multimaterial toolchange temperature" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Multiple extruders -# 1 changes: Multiple Extruders -# translation: Více Extruderů -# 7 changes: Infill extruder -# translation: Extruder pro výplň -msgid "Multiple extruders" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5569 -msgid "Multiplier" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -msgid "Name and Size" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:42 -msgid "Nb down:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:42 -msgid "Nb tests:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:45 -msgid "Nb up:" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:77 -#Similar to me: New project, clear platter -# 1 changes: New project, clear plater -# translation: Nový projekt, odstranit modely na podložce -msgid "New project, clear platter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3734 -msgid "No perimeters on bridge areas" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4695 -#Similar to me: No solid infill over -# 6 changes: Solid infill every -# translation: Plná výplň každou -# 7 changes: Top solid infill -# translation: Vrchní plné výplně -# 7 changes: top solid infill -# translation: vrchní plná výplň -msgid "No solid infill over" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4696 -msgid "No solid infill over perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4802 -#Similar to me: None (soluble) -# 4 changes: 0 (soluble) -# translation: 0 (rozpustné) -msgid "None (soluble)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2806 src/libslic3r/PrintConfig.cpp:2824 -#: src/libslic3r/PrintConfig.cpp:2842 src/libslic3r/PrintConfig.cpp:2860 -msgid "Not connected" -msgstr "" - -#: ../../ui_layout/default/print.ui : l41 -msgid "Not on first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4205 -msgid "Not on top" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:46 -msgid "Note that only Multiple of 5 can be engraved in the part" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2324 -#, possible-c-format, possible-boost-format -#Similar to me: Note: All parameters from this group are moved to the Physical Printer settings (see changelog).\n\nA new Physical Printer profile is created by clicking on the \"cog\" icon right of the Printer profiles combo box, by selecting the \"Add physical printer\" item in the Printer combo box. The Physical Printer profile editor opens also when clicking on the \"cog\" icon in the Printer settings tab. The Physical Printer profiles are being stored into %s/physical_printer directory. -# 10 changes: Note: All parameters from this group are moved to the Physical Printer settings (see changelog).\n\nA new Physical Printer profile is created by clicking on the \"cog\" icon right of the Printer profiles combo box, by selecting the \"Add physical printer\" item in the Printer combo box. The Physical Printer profile editor opens also when clicking on the \"cog\" icon in the Printer settings tab. The Physical Printer profiles are being stored into PrusaSlicer/physical_printer directory. -# translation: Poznámka: Všechna nastavení z této sekce jsou přesunuta do nastavení Fyzické tiskárny (viz changelog).\n\nNový profil Fyzické tiskárny lze vytvořit kliknutím na ikonu „ozubeného kolečka“ vpravo od pole se seznamem profilů tiskáren a výběrem položky „Přidat fyzickou tiskárnu“. Editor fyzické tiskárny se otevře po kliknutí na ikonu „ozubeného kolečka“ na kartě Nastavení tiskárny. Profily fyzických tiskáren se ukládají do adresáře PrusaSlicer/physical_printer directory. -msgid "" -"Note: All parameters from this group are moved to the Physical Printer " -"settings (see changelog).\n" -"\n" -"A new Physical Printer profile is created by clicking on the \"cog\" icon " -"right of the Printer profiles combo box, by selecting the \"Add physical " -"printer\" item in the Printer combo box. The Physical Printer profile editor " -"opens also when clicking on the \"cog\" icon in the Printer settings tab. " -"The Physical Printer profiles are being stored into %s/physical_printer " -"directory." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5553 -#Similar to me: Nozzle volume -# 3 changes: Bottle volume -# translation: Objem láhve -msgid "Nozzle volume" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4382 -#Similar to me: Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set zero to disable skirt completely. -# 8 changes: Number of loops for the skirt. If the Minimum Extrusion Length option is set, the number of loops might be greater than the one configured here. Set this to zero to disable skirt completely. -# translation: Počet obrysových smyček. Je-li nastavena možnost Minimální délka extruze, počet obrysových smyček může být větší než počet zde nakonfigurovaných. Nastavte tuto hodnotu na nulu, pro úplné deaktivování. -msgid "" -"Number of loops for the skirt. If the Minimum Extrusion Length option is " -"set, the number of loops might be greater than the one configured here. Set " -"zero to disable skirt completely." -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:2415 -#Similar to me: Number of milling heads. -# 8 changes: Number of cooling moves -# translation: Počet chladících pohybů -msgid "Number of milling heads." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3726 -#, possible-c-format, possible-boost-format -msgid "" -"Number of mm the overhang need to be for the reversal to be considered " -"useful. Can be a % of the perimeter width." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:2071 -#, possible-c-format, possible-boost-format -msgid "O&pen %s" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1041 -#Similar to me: Object sort -# 4 changes: Object name -# translation: Jméno objektu -# 4 changes: Objects List -# translation: Seznam Objektů -msgid "Object sort" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:909 -msgid "" -"Offset of brim from the printed object. Should be kept at 0 unless you " -"encounter great difficulties to separate them.\n" -"It's subtracted to brim_width and brim_width_interior, so it has to be lower " -"than them. The offset is applied after the first layer XY compensation " -"(elephant foot)." -msgstr "" - -#: ../../ui_layout/default/extruder.ui -#Similar to me: Offsets (for multi-extruder printers) -# 7 changes: Position (for multi-extruder printers) -# translation: Pozice (pro tiskárny s více extrudery) -msgid "Offsets (for multi-extruder printers)" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1129 -msgid "" -"Old layout: all windows are in the application, settings are on the top tab " -"bar and the platter choice in on the bottom of the platter view." -msgstr "" - -#: ../../ui_layout/default/print.ui : l187 -msgid "On" -msgstr "" - -#: ../../ui_layout/default/print.ui : l27 -#Similar to me: On first layer -# 4 changes: First layer -# translation: První vrstva -msgid "On first layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1554 -#Similar to me: On odd layers -# 5 changes: Add Layers -# translation: Přidat Vrstvy -# 5 changes: Faded layers -# translation: Vrstvy počátečního osvitu -# 5 changes: Other layers -# translation: Ostatní vrstvy -msgid "On odd layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1543 -msgid "On overhangs" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:658 -msgid "" -"On some OS like MacOS or some Linux, tooltips can't stay on for a long time. " -"This setting replaces native tooltips with custom dialogs to improve " -"readability (only for settings).\n" -"Note that for the number controls, you need to hover the arrows to get the " -"custom tooltip. Also, it keeps the focus but will give it back when it " -"closes. It won't show up if you are editing the field." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4195 -msgid "On surfaces" -msgstr "" - -#: ../../ui_layout/default/print.ui : l28 -#Similar to me: On top surfaces -# 3 changes: All top surfaces -# translation: Všechny horní povrchy -msgid "On top surfaces" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:47 -msgid "one test" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: One-loop perimeters -# 7 changes: Overhang perimeter -# translation: Perimetr převisu -# 7 changes: Small perimeters -# translation: Malé perimetry -msgid "One-loop perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4603 -#Similar to me: Only custom Start G-code -# 9 changes: Filament Start G-code -# translation: Filament Začátek G-code -msgid "Only custom Start G-code" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1518 -msgid "" -"Only do the vase trick on the external side. Useful when the thickness is " -"too low." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1526 -msgid "" -"Only do the vase trick on the external side. Useful when you only want to " -"remove seam from screw hole." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:852 -msgid "Only draw brim over the sharp edges of the model." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1523 -msgid "Only for inner side" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1515 -msgid "Only for outer side" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui : l38 -msgid "Only for overhangs" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:208 -msgid "Only if on platter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4206 -msgid "Only on top" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3627 -msgid "Only one peri - other algo" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Only one perimeter -# 6 changes: Overhang perimeter -# translation: Perimetr převisu -msgid "Only one perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3613 -msgid "Only one perimeter on First layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3620 -msgid "Only one perimeter on Top surfaces" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5275 -msgid "" -"Only used for Klipper, where you can name the extruder. If not set, will be " -"'extruderX' with 'X' replaced by the extruder number." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:209 -msgid "Only when GCode is ready" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:92 src/slic3r/GUI/MainFrame.cpp:2071 -#, possible-c-format, possible-boost-format -msgid "Open %s" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:78 src/slic3r/GUI/MainFrame.cpp:92 -#: src/slic3r/GUI/MainFrame.cpp:1913 -#, possible-c-format, possible-boost-format -#Similar to me: Open a new %s instance -# 5 changes: Open new instance -# translation: Otevřít novou instanci -# 7 changes: Open New Instance -# translation: Otevřít Novou Instanci -msgid "Open a new %s instance" -msgstr "" - - -#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:419 -#Similar to me: Open Client certificate file -# 5 changes: Open CA certificate file -# translation: Otevřít soubor s certifikátem CA -msgid "Open Client certificate file" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:78 -#Similar to me: Open project STL/OBJ/AMF/3MF with config, clear platter -# 1 changes: Open project STL/OBJ/AMF/3MF with config, clear plater -# translation: Otevřít projekt STL/OBJ/AMF/3MF s konfigurací, odstranit modely na podložce -# 17 changes: Import STL/OBJ/AMF/3MF without config, keep plater -# translation: Importovat STL/OBJ/AMF/3MF bez konfigurace, zachová stávající podložku -msgid "Open project STL/OBJ/AMF/3MF with config, clear platter" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1559 -#, possible-c-format, possible-boost-format -#Similar to me: Open the %s releases page in your browser -# 8 changes: Open the software releases page in your browser -# translation: Otevřít stránku s verzemi tohoto softwaru ve vašem prohlížeči -# 10 changes: Open the %s website in your browser -# translation: Otevřít webovou stránku %s v prohlížeči -msgid "Open the %s releases page in your browser" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1561 -#, possible-c-format, possible-boost-format -#Similar to me: Open the %s wiki in your browser -# 5 changes: Open the %s website in your browser -# translation: Otevřít webovou stránku %s v prohlížeči -msgid "Open the %s wiki in your browser" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1570 -#Similar to me: Open the Slic3r Manual in your browser -# 13 changes: Open the %s website in your browser -# translation: Otevřít webovou stránku %s v prohlížeči -msgid "Open the Slic3r Manual in your browser" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1563 -#Similar to me: Open the Slic3r website in your browser -# 6 changes: Open the %s website in your browser -# translation: Otevřít webovou stránku %s v prohlížeči -msgid "Open the Slic3r website in your browser" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Options for support material interface -# 6 changes: Options for support material and raft -# translation: Volby pro podpěry a raft -# 13 changes: Support material interface -# translation: Kontaktní vrstvy podpěr -msgid "Options for support material interface" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5672 -#Similar to me: Outer -# 2 changes: Other -# translation: Ostatní -# 2 changes: Enter -# translation: Enter -# 2 changes: Outset -# translation: Návrší -msgid "Outer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5673 -#Similar to me: Outer XY size compensation -# 8 changes: XY Size Compensation -# translation: Kompenzace XY rozměrů -msgid "Outer XY size compensation" -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui -#Similar to me: Output -# 2 changes: Outset -# translation: Návrší -msgid "Output" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6727 -#Similar to me: Output Format -# 5 changes: Output File -# translation: Výstupní soubor -msgid "Output Format" -msgstr "" - -#: ../../ui_layout/default/print.ui : l293 -msgid "Over raft" -msgstr "" - - -#: src/slic3r/GUI/CalibrationOverBridgeDialog.cpp:30 -msgid "Over-Bridge calibration" -msgstr "" - - -#: src/slic3r/GUI/CalibrationOverBridgeDialog.cpp:47 -msgid "Over-bridge calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3663 -msgid "Overhang acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3702 -#Similar to me: Overhang bridge flow threshold -# 12 changes: Overhang threshold -# translation: Mezní úhel převisu -msgid "Overhang bridge flow threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3690 -msgid "Overhang bridge speed threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3715 -msgid "Overhang reversal" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3724 -#Similar to me: Overhang reversal threshold -# 9 changes: Overhang threshold -# translation: Mezní úhel převisu -msgid "Overhang reversal threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3662 src/libslic3r/PrintConfig.cpp:3676 -msgid "Overhangs" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3677 -msgid "Overhangs speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5167 -msgid "" -"Overlap between the thin wall and the perimeters. Can be a % of the external " -"perimeter width (default 50%)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5130 src/libslic3r/PrintConfig.cpp:5131 -#Similar to me: Overlapping all perimeters -# 9 changes: Overhang perimeter -# translation: Perimetr převisu -# 10 changes: Generating perimeters -# translation: Generování perimetrů -msgid "Overlapping all perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5119 src/libslic3r/PrintConfig.cpp:5120 -msgid "Overlapping external perimeter" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4131 -msgid "" -"Override the retract_length setting from the printer config. Used for " -"calibration. Set negative to disable" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5106 -msgid "" -"Override the temperature of the extruder. Avoid making too many changes, it " -"won't stop for cooling/heating. 0 to disable. May only work on Height range " -"modifiers." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:473 -#Similar to me: Paths -# 2 changes: Pages -# translation: Strany -msgid "Paths" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5000 -#, possible-c-format, possible-boost-format -msgid "" -"Pattern for interface layers.\n" -"Note that 'Hilbert', 'Ironing' and '(filled)' patterns are meant to be used " -"with soluble supports and 100% fill interface layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:896 -msgid "" -"Pattern for the ear. The concentric is the default one. The rectilinear has " -"a perimeter around it, you can try it if the concentric has too many " -"problems to stick to the build plate." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1900 -msgid "Pause before extraction " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1891 -msgid "Pause in melt zone" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3060 -msgid "" -"Percent of a flow rate relative to object's normal layer height. It's the " -"percentage of the layer that will be over-extruded on top to do the ironing." -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: perimeter -# 1 changes: Perimeter -# translation: Perimetr -# 1 changes: perimeters -# translation: perimetry -# 2 changes: Perimeters -# translation: Perimetry -msgid "perimeter" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Perimeter acceleration -# 8 changes: Maximum accelerations -# translation: Maximální zrychlení -# 8 changes: Parameter validation -# translation: Validace parametru -msgid "Perimeter acceleration" -msgstr "" - -#: ../../ui_layout/default/print.ui : l144 -msgid "Perimeter anchor" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3791 -msgid "Perimeter bonding" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3864 -msgid "Perimeter loop seam" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3876 -msgid "perimeter overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3877 -msgid "Perimeter overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3837 -#Similar to me: Perimeter spacing -# 6 changes: Pattern spacing -# translation: Rozteč podpěr -msgid "Perimeter spacing" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Perimeter speed -# 5 changes: Perimeters -# translation: Perimetry -# 5 changes: Print speed -# translation: Rychlost tisku -# 6 changes: Perimeter -# translation: Perimetr -msgid "Perimeter speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3817 -#Similar to me: Perimeter width -# 6 changes: Brim width -# translation: Šířka límce -# 6 changes: Perimeter -# translation: Perimetr -# 6 changes: Perimeters -# translation: Perimetry -msgid "Perimeter width" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Perimeters & Shell" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3914 -#Similar to me: Perimeters count -# 6 changes: Perimeters -# translation: Perimetry -msgid "Perimeters count" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3854 src/libslic3r/PrintConfig.cpp:3855 -#Similar to me: Perimeters loop -# 5 changes: Perimeters -# translation: Perimetry -# 6 changes: Perimeter -# translation: Perimetr -# 6 changes: perimeters -# translation: perimetry -msgid "Perimeters loop" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2546 -#, possible-c-format, possible-boost-format -#Similar to me: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall.\nCan be a % of the nozzle diameter. -# 36 changes: Perimeters will be split into multiple segments by inserting Fuzzy skin points. Lowering the Fuzzy skin point distance will increase the number of randomly offset points on the perimeter wall. -# translation: Perimetry se rozdělí na více segmentů vložením bodů členitého povrchu. Snížením vzdálenosti bodů členitého povrchu se zvýší počet náhodně posunutých bodů na obvodové stěně. -msgid "" -"Perimeters will be split into multiple segments by inserting Fuzzy skin " -"points. Lowering the Fuzzy skin point distance will increase the number of " -"randomly offset points on the perimeter wall.\n" -"Can be a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5560 -msgid "Pigment percentage" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:182 src/slic3r/GUI/MainFrame.cpp:368 -#: src/slic3r/GUI/MainFrame.cpp:460 src/slic3r/GUI/MainFrame.cpp:637 -#: src/slic3r/GUI/MainFrame.cpp:640 src/slic3r/GUI/MainFrame.cpp:699 -#: src/slic3r/GUI/MainFrame.cpp:742 src/slic3r/GUI/MainFrame.cpp:745 -#Similar to me: Platter -# 1 changes: Plater -# translation: Podložka -# 2 changes: Pattern -# translation: Vzor -msgid "Platter" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:776 -msgid "Platter icons Color template" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5729 -msgid "Polyhole detection margin" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5742 -msgid "Polyhole twist" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4257 -msgid "" -"Position of perimeters' starting points.\n" -"Cost-based option let you choose the angle and travel cost. A high angle " -"cost will place the seam where it can be hidden by a corner, the travel cost " -"place the seam near the last position (often at the end of the previous " -"infill)." -msgstr "" - -#: ../../ui_layout/default/print.ui : l72 -msgid "Position of perimeters' starting points.\nCustom can be defined in Advanced or Expert mode. Cost-based settings let you choose the angle and travel cost. A high angle cost will place the seam where it can be hidden by a corner, the travel cost place the seam near the last position (often at the end of the previous infill)." -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Post-processing milling -# 7 changes: Post-processing scripts -# translation: Post-processing skripty -msgid "Post-processing milling" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Post-processing script -# 1 changes: Post-processing scripts -# translation: Post-processing skripty -msgid "Post-processing script" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1117 -msgid "Precision" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5773 -#Similar to me: Preferred orientation -# 8 changes: Optimize orientation -# translation: Optimalizovat orientaci -msgid "Preferred orientation" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:225 -msgid "Presets and updates" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:561 -msgid "" -"Prevent the gcode builder from triggering an exception if a full layer is " -"empty, and allow the print to start from thin air afterward." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1966 -msgid "Print a calibration cube, for various calibration goals." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1033 -msgid "Print all brim at startup" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:392 -msgid "Print at the end" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1506 -msgid "" -"Print contour perimeters in two circles, in a continuous way, like for a " -"vase mode. It needs the external_perimeters_first parameter to work. \n" -"Doesn't work for the first layer, as it may damage the bed overwise. \n" -"Note that it will use min_layer_height from your hardware setting as the " -"base height (it doesn't start at 0), so be sure to put here the lowest value " -"your printer can handle. if it's not lower than two times the current layer " -"height, it falls back to the normal algorithm, as there is not enough room " -"to do two loops." -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Print remaining times -# 7 changes: Supports remaining times -# translation: Podpora zbývajících tiskových časů -# 8 changes: Remaining time -# translation: Zbývající čas -# 8 changes: Remaining time: -# translation: Zbývající čas: -msgid "Print remaining times" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:141 -#, possible-boost-format -msgid "" -"print speed will be reduced so that no less than %1%s are spent on that layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:393 -msgid "" -"Print the thumbnail code at the end of the gcode file instead of the front.\n" -"Be careful! Most firmwares expect it at the front, so be sure that your " -"firmware support it." -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -#Similar to me: Processing limit -# 5 changes: Processing %s -# translation: Zpracovávám %s -msgid "Processing limit" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6733 -msgid "Prusa SL1" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5947 -msgid "" -"Put here the gcode to change the toolhead (called after the g-code " -"T{next_extruder}). You have access to {next_extruder} and " -"{previous_extruder}. next_extruder is the 'extruder number' of the new " -"milling tool, it's equal to the index (begining at 0) of the milling tool " -"plus the number of extruders. previous_extruder is the 'extruder number' of " -"the previous tool, it may be a normal extruder, if it's below the number of " -"extruders. The number of extruder is available at {extruder} and the number " -"of milling tool is available at {milling_cutter}." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5589 -msgid "Quadratric" -msgstr "" - - -#: src/slic3r/GUI/FreeCADDialog.cpp:249 -#Similar to me: Quick Save -# 3 changes: Quick Slice -# translation: Rychlé Slicování -msgid "Quick Save" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4020 -#Similar to me: Raft first layer density -# 6 changes: First layer density -# translation: Hustota první vrstvy -msgid "Raft first layer density" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4031 -#Similar to me: Raft first layer expansion -# 6 changes: First layer expansion -# translation: Rozšíření první vrstvy -msgid "Raft first layer expansion" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:497 -#, possible-boost-format -msgid "" -"Recommended min extrusion width for other layers (with a layer height of " -"%1%) is %2$.3f mm (or %3%%%).\n" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:495 -#, possible-boost-format -msgid "" -"Recommended min extrusion width for the first layer (with a first layer " -"height of %1%) is %2$.3f mm (or %3%%%)\n" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:458 -#, possible-c-format, possible-boost-format -#Similar to me: Recommended object min (thick) wall thickness for layer height %.2f and -# 8 changes: Recommended object thin wall thickness for layer height %.2f and -# translation: Doporučená tloušťka stěny objektu pro výšku vrstvy %.2f a -msgid "Recommended object min (thick) wall thickness for layer height %.2f and" -msgstr "" - - -#: src/slic3r/GUI/PresetHints.cpp:417 -#Similar to me: Recommended object min thin wall thickness: Not available due to invalid layer height. -# 4 changes: Recommended object thin wall thickness: Not available due to invalid layer height. -# translation: Doporučená tloušťka stěny objektu: Není k dispozici kvůli neplatné výšce vrstvy. -# 28 changes: Top / bottom shell thickness hint: Not available due to invalid layer height. -# translation: Nápověda pro tloušťku vrchní / spodní skořepiny: Není k dipozici z důvodu neplatné výšky vrstvy. -# 31 changes: Recommended object thin wall thickness: Not available due to excessively small extrusion width. -# translation: Doporučená tloušťka stěny objektu: Není k dispozici kvůli příliš malé šířce extruze. -msgid "" -"Recommended object min thin wall thickness: Not available due to invalid " -"layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1349 -#Similar to me: Rectilinear (filled) -# 6 changes: Rectilinear grid -# translation: Přímočará mřížka -msgid "Rectilinear (filled)" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:102 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:104 -#: src/slic3r/GUI/KBShortcutsDialog.cpp:210 -#Similar to me: Reload platter from disk -# 1 changes: Reload plater from disk -# translation: Znovu načíst podložku z disku -# 5 changes: Reload the plater from disk -# translation: Znovu načíst podložku z disku -# 6 changes: Reload all from disk -# translation: Vše znovu načíst z disku -msgid "Reload platter from disk" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:208 src/slic3r/GUI/MainFrame.cpp:1855 -#: src/slic3r/GUI/MainFrame.cpp:2060 -#Similar to me: Reload the platter from disk -# 1 changes: Reload the plater from disk -# translation: Znovu načíst podložku z disku -# 5 changes: Reload plater from disk -# translation: Znovu načíst podložku z disku -# 10 changes: Reload all from disk -# translation: Vše znovu načíst z disku -msgid "Reload the platter from disk" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:67 -msgid "Remove fil. slowdown" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3750 -#Similar to me: Remove perimeters -# 3 changes: Remove parameter -# translation: Odebrat parametr -# 5 changes: Small perimeters -# translation: Malé perimetry -msgid "Remove perimeters" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1171 -#Similar to me: Retr. -# 2 changes: Rear -# translation: Zezadu -# 2 changes: Return -# translation: Return -msgid "Retr." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:105 -msgid "Retraction calibration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4129 -#Similar to me: Retraction length -# 1 changes: Retraction Length -# translation: Vzdálenost retrakce -# 6 changes: Retraction Speed -# translation: Rychlost retrakce -msgid "Retraction length" -msgstr "" - -#: ../../ui_layout/default/extruder.ui -#Similar to me: Retraction wipe -# 4 changes: Retraction Speed -# translation: Rychlost retrakce -# 5 changes: Retraction -# translation: Retrakce -# 5 changes: Retractions -# translation: Retrakce -msgid "Retraction wipe" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3714 -msgid "Reverse on odd" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3723 -#Similar to me: Reverse threshold -# 6 changes: Overhang threshold -# translation: Mezní úhel převisu -msgid "Reverse threshold" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1052 -#Similar to me: Right panel -# 4 changes: Right View -# translation: Pohled zprava -msgid "Right panel" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5775 -msgid "Rotate stl around z axes while adding them to the bed." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5744 -msgid "Rotate the polyhole every layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3889 -msgid "Round corners" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3890 -msgid "Round corners for perimeters" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5728 -msgid "Roundness margin" -msgstr "" - -#: ../../ui_layout/default/filament.ui : l31 -msgid "Run the fan at default speed when possible" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1296 src/libslic3r/PrintConfig.cpp:5015 -#Similar to me: Sawtooth -# 3 changes: Smooth -# translation: Vyhladit -msgid "Sawtooth" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2271 -#Similar to me: Scattered Rectilinear -# 7 changes: Aligned Rectilinear -# translation: Zarovnaný přímočarý -msgid "Scattered Rectilinear" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1977 -msgid "Script help page" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Seam -# 1 changes: Seams -# translation: Švy -msgid "Seam" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4274 -msgid "Seam angle cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4293 -msgid "Seam gap" -msgstr "" - - -#: src/slic3r/GUI/GUI_ObjectList.cpp:3798 -#Similar to me: Seam Position -# 1 changes: Seam position -# translation: Pozice švu -# 2 changes: Set Position -# translation: Nastavení pozice -# 5 changes: Position -# translation: Pozice -msgid "Seam Position" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4284 -msgid "Seam travel cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5721 -msgid "" -"Search for almost-circular holes that span more than one layer and convert " -"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " -"compute the polyhole.\n" -"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:257 -#Similar to me: Section -# 1 changes: Sections -# translation: Sekce -# 2 changes: Action -# translation: Akce -# 2 changes: Selection -# translation: Výběr -msgid "Section" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 -#Similar to me: Select 3d editor Tab -# 7 changes: Select Plater Tab -# translation: Zobrazit panel Podložka -msgid "Select 3d editor Tab" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:35 -msgid "" -"Select a goal, this will change settings to increase the effects to search." -msgstr "" - - -#: src/slic3r/GUI/ConfigWizard.cpp:2949 -#Similar to me: Select all standard printers in this page -# 13 changes: Select all standard printers -# translation: Vybrat všechny standardní tiskárny -msgid "Select all standard printers in this page" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:110 -msgid "Select Gcode preview Tab" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:109 -msgid "Select Layer Preview Tab" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:36 -msgid "Select the number milimeters for the tower." -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:36 -#Similar to me: Select the number of tests -# 10 changes: Select the new file -# translation: Vyberte nový soubor -msgid "Select the number of tests" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:39 -msgid "" -"Select the number of tests with higher temperature than the current one." -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:36 -msgid "Select the number of tests with lower temperature than the current one." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:49 -msgid "" -"Select the number tower to print, and by how many degrees C to decrease each " -"time." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6728 -msgid "Select the output format for this printer." -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:32 -msgid "" -"Select the step in % between two tests.\n" -"Note that only multiple of 5 are engraved on the parts." -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:32 -msgid "" -"Select the step in celcius between two tests.\n" -"Note that only multiple of 5 are engraved on the part." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4188 -msgid "" -"Select this option to enforce z-lift on the first layer.\n" -"Useful to still use the lift on the first layer even if the 'Only lift Z " -"below' (retract_lift_above) is higher than 0." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4198 -msgid "Select this option to not use/enforce the z-lift on a top surface." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5113 -msgid "" -"Set the new lift-z value for this override. 0 will disable the z-lift. -& to " -"disable. May only work on Height range modifiers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3466 -msgid "" -"Set this if your printer uses control values from 0-100 instead of 0-255." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1398 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.05 x nozzle diameter will be used. If expressed as percentage (for example 112.5%), it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. -# 150 changes: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%), it will be computed over layer height. -# translation: Nastavením na kladnou hodnotu, definuje šířku manuální extruze pro vnější obvod. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je hodnota vyjádřena jako procento (například 200%), vypočítá se podle výšky vrstvy. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for external " -"perimeters. If left zero, default extrusion width will be used if set, " -"otherwise 1.05 x nozzle diameter will be used. If expressed as percentage " -"(for example 112.5%), it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2395 -msgid "" -"Set this to a non-zero value to set a manual extrusion width for first " -"layer. You can use this to force fatter extrudates for better adhesion. If " -"expressed as percentage (for example 140%) it will be computed over the " -"nozzle diameter of the nozzle used for the type of extrusion. If set to " -"zero, it will use the default extrusion width.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4501 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left as zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height. -# 109 changes: Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Zadejte kladnou hodnotu, chcete-li nastavit manuálně šířku extruze pro výplň plných povrchů. Pokud je ponechána nula, použije se standardní šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je vyjádřena procenty (například 90%), bude vypočtena z výšky vrstvy. -# 131 changes: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%), it will be computed over layer height. -# translation: Nastavením na kladnou hodnotu, definuje šířku manuální extruze pro vnější obvod. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je hodnota vyjádřena jako procento (například 200%), vypočítá se podle výšky vrstvy. -# 138 changes: Set this to a non-zero value to set a manual extrusion width for support material. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Zadejte kladnou hodnotu, chcete-li nastavit manuálně šířku extruze pro podpěry. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je nastavena, jinak se použije průměr trysky. Pokud je vyjádřena procenty (například 90%), bude vypočtena z výšky vrstvy. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"solid surfaces. If left as zero, default extrusion width will be used if " -"set, otherwise 1.125 x nozzle diameter will be used. If expressed as " -"percentage (for example 110%) it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5297 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If left as zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height. -# 109 changes: Set this to a non-zero value to set a manual extrusion width for infill for top surfaces. You may want to use thinner extrudates to fill all narrow regions and get a smoother finish. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Zadejte kladnou hodnotu, chcete-li nastavit manuálně šířku extruze pro výplň vrchních ploch. Možná budete chtít použít tenčí extruzi, abyste vyplnili všechny úzké oblasti a získali hladší povrch. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je nastavena, jinak se použije průměr trysky. Pokud je vyjádřena procenty (například 90%), bude vypočtena z výšky vrstvy. -# 173 changes: Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%) it will be computed over layer height. -# translation: Nastavením na kladnou hodnotu nastavíte manuálně šířku vytlačování perimetrů. Chcete-li získat přesnější povrchy, můžete použít tenčí extruze. Pokud je ponechána nula, použije se standardní šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je vyjádřeno procenty (například 200%), vypočte se z výšky vrstvy. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill for " -"top surfaces. You may want to use thinner extrudates to fill all narrow " -"regions and get a smoother finish. If left as zero, default extrusion width " -"will be used if set, otherwise nozzle diameter will be used. If expressed as " -"percentage (for example 110%) it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2906 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for infill. If left as zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. You may want to use fatter extrudates to speed up the infill and make your parts stronger. If expressed as percentage (for example 110%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using default layer height. -# 109 changes: Set this to a non-zero value to set a manual extrusion width for infill. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. You may want to use fatter extrudates to speed up the infill and make your parts stronger. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Nastavením kladné hodnoty povolíte manuální nastavení šířky extruze pro výplň. Pokud je ponechána nula, použije se standardní šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Je možné, že budete chtít použít tlustší extruze, pro zrychlení výplně a zpevnění vašich výtisků. Pokud je vyjádřeno jako procenty (například 90%), bude vypočteno z výšky vrstvy. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for infill. If " -"left as zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. You may want to use fatter extrudates to speed " -"up the infill and make your parts stronger. If expressed as percentage (for " -"example 110%) it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3819 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 105%) it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. -# 146 changes: Set this to a non-zero value to set a manual extrusion width for perimeters. You may want to use thinner extrudates to get more accurate surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%) it will be computed over layer height. -# translation: Nastavením na kladnou hodnotu nastavíte manuálně šířku vytlačování perimetrů. Chcete-li získat přesnější povrchy, můžete použít tenčí extruze. Pokud je ponechána nula, použije se standardní šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je vyjádřeno procenty (například 200%), vypočte se z výšky vrstvy. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for perimeters. " -"You may want to use thinner extrudates to get more accurate surfaces. If " -"left zero, default extrusion width will be used if set, otherwise 1.125 x " -"nozzle diameter will be used. If expressed as percentage (for example 105%) " -"it will be computed over nozzle diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4872 -#Similar to me: Set this to a non-zero value to set a manual extrusion width for support material. If left as zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 110%) it will be computed over nozzle diameter. -# 18 changes: Set this to a non-zero value to set a manual extrusion width for support material. If left zero, default extrusion width will be used if set, otherwise nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Zadejte kladnou hodnotu, chcete-li nastavit manuálně šířku extruze pro podpěry. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je nastavena, jinak se použije průměr trysky. Pokud je vyjádřena procenty (například 90%), bude vypočtena z výšky vrstvy. -# 43 changes: Set this to a non-zero value to set a manual extrusion width for external perimeters. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 200%), it will be computed over layer height. -# translation: Nastavením na kladnou hodnotu, definuje šířku manuální extruze pro vnější obvod. Pokud je ponechána nula, použije se výchozí šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je hodnota vyjádřena jako procento (například 200%), vypočítá se podle výšky vrstvy. -# 47 changes: Set this to a non-zero value to set a manual extrusion width for infill for solid surfaces. If left zero, default extrusion width will be used if set, otherwise 1.125 x nozzle diameter will be used. If expressed as percentage (for example 90%) it will be computed over layer height. -# translation: Zadejte kladnou hodnotu, chcete-li nastavit manuálně šířku extruze pro výplň plných povrchů. Pokud je ponechána nula, použije se standardní šířka extruze, pokud je nastavena, jinak se použije průměr trysky 1,125 x. Pokud je vyjádřena procenty (například 90%), bude vypočtena z výšky vrstvy. -msgid "" -"Set this to a non-zero value to set a manual extrusion width for support " -"material. If left as zero, default extrusion width will be used if set, " -"otherwise nozzle diameter will be used. If expressed as percentage (for " -"example 110%) it will be computed over nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1614 -#Similar to me: Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the platter.\nSet zero to disable clearance checking. -# 42 changes: Set this to the clearance radius around your extruder. If the extruder is not centered, choose the largest value for safety. This setting is used to check for collisions and to display the graphical preview in the plater. -# translation: Zadejte horizontální rádius kolizního prostoru okolo extruderu. Pokud tryska není v centru tohoto rádiusu, zvolte nejdelší vzdálenost. Toto nastavení slouží ke kontrole kolizí a zobrazení grafického náhledu na podložce. -msgid "" -"Set this to the clearance radius around your extruder. If the extruder is " -"not centered, choose the largest value for safety. This setting is used to " -"check for collisions and to display the graphical preview in the platter.\n" -"Set zero to disable clearance checking." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5761 -msgid "" -"Set this to the height moved when your Z motor (or equivalent) turns one " -"step.If your motor needs 200 steps to move your head/platter by 1mm, this " -"field should be 1/200 = 0.005.\n" -"Note that the gcode will write the z values with 6 digits after the dot if " -"z_step is set (it's 3 digits if it's disabled).\n" -"Set zero to disable." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1130 -msgid "" -"Settings button: all windows are in the application, no tabs: you have to " -"clic on settings gears to switch to settings tabs." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:686 -msgid "Settings layout and colors" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1131 -msgid "" -"Settings window: settings are displayed in their own window. You have to " -"clic on settings gears to show the settings window." -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:227 -msgid "Shall I switch the brim offset to 0?" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Short layer time - began to increase base fan speed" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:313 -msgid "Show overwrite dialog." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:400 -msgid "Show the bed texture on the thumbnail picture." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1873 -msgid "Show the editor of the input models" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1876 -msgid "Show the layers from the slicing process" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1879 -#Similar to me: Show the preview of the gcode output -# 14 changes: Shows a preview of the font. -# translation: Zobrazí náhled písma. -msgid "Show the preview of the gcode output" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:421 -msgid "Show the supports (and pads) on the thumbnail picture." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2061 -msgid "Shrinkage" -msgstr "" - -#: ../../ui_layout/default/print.ui : l56 -msgid "Simple widget to enable/disable the overhangs detection (using 55% and 75% for the two thresholds)\nUse the expert mode to get more detailled widgets" -msgstr "" - -#: ../../ui_layout/default/print.ui : l391 -msgid "Simulate Prusa 'no thick bridge'" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Size for Gcode" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:640 -msgid "Size of the tab icons, in pixels. Set to 0 to remove icons." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1885 -msgid "" -"Skinnydip performs a secondary dip into the meltzone to burn off fine " -"strings of filament" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: skirt -# 1 changes: Skirt -# translation: Obrys -# 2 changes: shift -# translation: shift -msgid "skirt" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Skirt & Brim -# 3 changes: Skirt/Brim -# translation: Obrys/Límec -# 4 changes: Skirt and brim -# translation: Obrys a límec -msgid "Skirt & Brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4329 -#Similar to me: Skirt brim -# 2 changes: Skirt/Brim -# translation: Obrys/Límec -# 4 changes: Skirt and brim -# translation: Obrys a límec -msgid "Skirt brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4347 -msgid "Skirt distance from brim" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4364 -#Similar to me: Skirt width -# 4 changes: Brim width -# translation: Šířka límce -# 4 changes: Min width -# translation: Min šířka -msgid "Skirt width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6738 -msgid "SLA output precision" -msgstr "" - - -#: src/slic3r/GUI/AboutDialog.cpp:276 src/slic3r/GUI/GUI_App.cpp:283 -msgid "" -"Slic3r contains sizable contributions from Prusa Research. Original work by " -"Alessandro Ranellucci and the RepRap community." -msgstr "" - - -#: src/slic3r/Config/Snapshot.cpp:600 -msgid "Slic3r error" -msgstr "" - - -#: src/slic3r/Config/Snapshot.cpp:599 -#Similar to me: Slic3r has encountered an error while taking a configuration snapshot. -# 6 changes: PrusaSlicer has encountered an error while taking a configuration snapshot. -# translation: PrusaSlicer narazil na chybu při pořizování zálohy konfigurace. -msgid "Slic3r has encountered an error while taking a configuration snapshot." -msgstr "" - - -#: src/slic3r/GUI/AboutDialog.cpp:279 -msgid "Slic3r logo designed by Corey Daniels." -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:1569 -msgid "Slic3r Manual" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3514 -#Similar to me: Slic3r will never scale the speed below this one. -# 17 changes: Slic3r will not scale speed down below this speed. -# translation: Slic3r nebude měnit rychlost pod tuto rychlost. -msgid "Slic3r will never scale the speed below this one." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:808 -msgid "" -"Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " -"275cad" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:794 -msgid "" -"Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " -"296acc" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:780 -msgid "" -"Slic3r(yellow): ccbe29, PrusaSlicer(orange): cc6429, SuperSlicer(blue): " -"3d83ed" -msgstr "" - - -#: src/slic3r/GUI/MainFrame.cpp:361 src/slic3r/GUI/MainFrame.cpp:464 -#: src/slic3r/GUI/MainFrame.cpp:672 src/slic3r/GUI/MainFrame.cpp:715 -#Similar to me: Sliced preview -# 5 changes: G-code preview -# translation: Náhled G-codu -msgid "Sliced preview" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui : l44 -#Similar to me: Small -# 2 changes: Scale -# translation: Měřítko -msgid "Small" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Small perimeter speed -# 5 changes: Small perimeters -# translation: Malé perimetry -msgid "Small perimeter speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4418 -#Similar to me: Small perimeters speed -# 6 changes: Small perimeters -# translation: Malé perimetry -msgid "Small perimeters speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4682 -#Similar to me: Solid acceleration -# 7 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Solid acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4467 -#Similar to me: Solid fill overlap -# 6 changes: Solid infill every -# translation: Plná výplň každou -msgid "Solid fill overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1331 -#Similar to me: Solid fill pattern -# 4 changes: Top fill pattern -# translation: Vzor výplně horní vrstvy -# 5 changes: Bottom fill pattern -# translation: Vzor spodní výplně -# 7 changes: Solid infill every -# translation: Plná výplň každou -msgid "Solid fill pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4517 -#Similar to me: Solid infill spacing -# 7 changes: Solid infill every -# translation: Plná výplň každou -# 8 changes: Solid infill -# translation: Plná výplň -# 8 changes: Solid infill extruder -# translation: Extruder pro plnou výplň -msgid "Solid infill spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4533 -#Similar to me: Solid infill speed -# 4 changes: Solid infill every -# translation: Plná výplň každou -# 6 changes: Solid infill -# translation: Plná výplň -# 7 changes: solid infill -# translation: plná výplň -msgid "Solid infill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4499 -#Similar to me: Solid infill width -# 5 changes: Solid infill every -# translation: Plná výplň každou -# 6 changes: Solid infill -# translation: Plná výplň -# 7 changes: solid infill -# translation: plná výplň -msgid "Solid infill width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4516 -msgid "Solid spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2644 -#Similar to me: Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents Slic3r from exporting any extrusion value at all. -# 6 changes: Some G/M-code commands, including temperature control and others, are not universal. Set this option to your printer's firmware to get a compatible output. The \"No extrusion\" flavor prevents PrusaSlicer from exporting any extrusion value at all. -# translation: Některé příkazy G/M-code, včetně řízení teplot a další, nejsou univerzální. Vyberte typ firmware, který používá vaše tiskárna pro dosažení kompatibilního výstupu. Příkazy typu \"No extrusion\" zabraňují PrusaSliceru zcela exportovat jakoukoliv hodnotu extruze. -msgid "" -"Some G/M-code commands, including temperature control and others, are not " -"universal. Set this option to your printer's firmware to get a compatible " -"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " -"extrusion value at all." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:463 -msgid "" -"Some software like (for example) ASUS Sonic Studio injects a DLL (library) " -"that is known to create some instabilities. This option let Slic3r check at " -"startup if they are loaded." -msgstr "" - -#: ../../ui_layout/default/print.ui : l337 -#Similar to me: spacing -# 1 changes: Spacing -# translation: Vzdálenost -msgid "spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3069 -#Similar to me: Spacing between ironing lines -# 4 changes: Spacing between ironing passes -# translation: Mezery mezi žehlicími tahy -# 7 changes: Distance between ironing lines -# translation: Vzdálenost mezi žehlicími tahy -msgid "Spacing between ironing lines" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2719 src/libslic3r/PrintConfig.cpp:2968 -#Similar to me: Sparse -# 2 changes: Stars -# translation: Hvězdy -# 2 changes: Space -# translation: Mezerník -msgid "Sparse" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2232 -#Similar to me: Sparse fill pattern -# 6 changes: Bottom fill pattern -# translation: Vzor spodní výplně -# 6 changes: Top fill pattern -# translation: Vzor výplně horní vrstvy -msgid "Sparse fill pattern" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Sparse infill pattern -# 8 changes: Bottom fill pattern -# translation: Vzor spodní výplně -# 8 changes: Top fill pattern -# translation: Vzor výplně horní vrstvy -msgid "Sparse infill pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2969 -msgid "Sparse infill speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2613 -msgid "" -"Speed for filling small gaps using short zigzag moves. Keep this reasonably " -"low to avoid too much shaking and resonance issues.\n" -"Gap fill extrusions are ignored from the automatic volumetric speed " -"computation, unless you set it to 0.\n" -"This can be expressed as a percentage (for example: 80%) over the Internal " -"Perimeter speed." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6004 -#Similar to me: Speed for milling tool. -# 9 changes: Speed for print moves -# translation: Rychlosti pohybů tiskárny -msgid "Speed for milling tool." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3902 -msgid "" -"Speed for perimeters (contours, aka vertical shells).\n" -"This can be expressed as a percentage (for example: 80%) over the Default " -"speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:800 -msgid "" -"Speed for printing bridges.\n" -"This can be expressed as a percentage (for example: 60%) over the Default " -"speed.\n" -"Set zero to use the autospeed for this feature" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3679 -#, possible-c-format, possible-boost-format -msgid "" -"Speed for printing overhangs.\n" -"Can be a % of the bridge speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4535 -#Similar to me: Speed for printing solid regions (top/bottom/internal horizontal shells). \nThis can be expressed as a percentage (for example: 80%) over the Default speed.\nSet zero to use autospeed for this feature. -# 39 changes: Speed for printing solid regions (top/bottom/internal horizontal shells). This can be expressed as a percentage (for example: 80%) over the default infill speed above. Set to zero for auto. -# translation: Rychlost tisku plných oblastí (vrchní / spodní / vnitřní vodorovné stěny). Může být vyjádřeno procenty (například: 80%) oproti výchozí rychlosti vyplnění. Pro automatické nastavení zadejte nulu. -msgid "" -"Speed for printing solid regions (top/bottom/internal horizontal shells). \n" -"This can be expressed as a percentage (for example: 80%) over the Default " -"speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4972 -#Similar to me: Speed for printing support material interface layers.\nIf expressed as percentage (for example 50%) it will be calculated over support material speed.\nSet zero to use autospeed for this feature. -# 47 changes: Speed for printing support material interface layers. If expressed as percentage (for example 50%) it will be calculated over support material speed. -# translation: Rychlost tisku podpěrných interface vrstev. Pokud je vyjádřen procentní podíl (například 50%), vypočítá se podle rychlosti tisku podpěr. -msgid "" -"Speed for printing support material interface layers.\n" -"If expressed as percentage (for example 50%) it will be calculated over " -"support material speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5035 -msgid "" -"Speed for printing support material.\n" -"This can be expressed as a percentage (for example: 80%) over the Default " -"speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:814 -#, possible-c-format, possible-boost-format -msgid "" -"Speed for printing the bridges that support the top layer.\n" -"Can be a % of the bridge speed." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2971 -msgid "" -"Speed for printing the internal fill.\n" -"This can be expressed as a percentage (for example: 80%) over the Solid " -"Infill speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5345 -#Similar to me: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish.\nThis can be expressed as a percentage (for example: 80%) over the Solid Infill speed.\nSet zero to use autospeed for this feature. -# 34 changes: Speed for printing top solid layers (it only applies to the uppermost external layers and not to their internal solid layers). You may want to slow down this to get a nicer surface finish. This can be expressed as a percentage (for example: 80%) over the solid infill speed above. Set to zero for auto. -# translation: Rychlost tisku vrchních plných vrstev (vztahuje se pouze na nejvyšší horní vrstvy a nikoli na jejich vnitřní plné vrstvy). Rychlost lze zpomalit, abyste získali hezčí povrchovou úpravu. Může být vyjádřena procenty (například: 80%) z rychlosti plné výplně materiálu výše. Pro automatické nastavení zadejte nulu. -msgid "" -"Speed for printing top solid layers (it only applies to the uppermost " -"external layers and not to their internal solid layers). You may want to " -"slow down this to get a nicer surface finish.\n" -"This can be expressed as a percentage (for example: 80%) over the Solid " -"Infill speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5201 -msgid "" -"Speed for thin walls (external extrusions that are alone because the obect " -"is too thin at these places).\n" -"This can be expressed as a percentage (for example: 80%) over the External " -"Perimeter speed.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5512 -msgid "" -"Speed in mm/s of the wipe. If it's faster, it will try to go further away, " -"as the wipe time is set by ( 100% - 'retract before wipe') * 'retaction " -"length' / 'retraction speed'.\n" -"If set to zero, the travel speed is used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1918 -msgid "Speed to extract from melt zone" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1909 -msgid "Speed to move into melt zone" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Speedup time" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:405 -#Similar to me: Splash screen -# 5 changes: Show splash screen -# translation: Zobrazovat úvodní obrazovku -msgid "Splash screen" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:418 -msgid "Splash screen image" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:47 -#Similar to me: Standard Cube -# 5 changes: Standard -# translation: Běžné -msgid "Standard Cube" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:49 -msgid "" -"Standard cubic xyz cube, with a flat top. Better for infill/perimeter " -"overlap calibration." -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:60 -msgid "Start temp:" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1892 -msgid "" -"Stay in melt zone for this amount of time before extracting the filament. " -"Not usually necessary." -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:39 -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:53 -#Similar to me: Step: -# 2 changes: Stop -# translation: Zastavit -msgid "Step:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:48 -msgid "Steps:" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Support & Other -# 5 changes: Support Blocker -# translation: Blokátor podpěr -# 6 changes: Support Enforcer -# translation: Vynucení podpěr -# 6 changes: Support head -# translation: Hrot podpěry -msgid "Support & Other" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4723 -#Similar to me: Support acceleration -# 6 changes: Support Generator -# translation: Generátor Podpěr -# 8 changes: Maximum accelerations -# translation: Maximální zrychlení -msgid "Support acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4790 -msgid "Support contact distance type" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4745 -msgid "Support interface acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4885 -msgid "Support interface fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4998 -#Similar to me: Support interface pattern -# 9 changes: support interface -# translation: kontaktní vrstva podpěr -# 9 changes: Interface pattern -# translation: Vzor kontaktní vrstvy -# 10 changes: Bottom interface layers -# translation: Spodní kontaktní vrstvy -msgid "Support interface pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4970 -#Similar to me: Support interface speed -# 7 changes: support interface -# translation: kontaktní vrstva podpěr -msgid "Support interface speed" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: support material -# 1 changes: Support material -# translation: Podpěry -# 5 changes: support interface -# translation: kontaktní vrstva podpěr -msgid "support material" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Support Material -# 1 changes: Support material -# translation: Podpěry -# 6 changes: Support head -# translation: Hrot podpěry -# 6 changes: support interface -# translation: kontaktní vrstva podpěr -msgid "Support Material" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4860 -#Similar to me: Support material extruder -# 7 changes: Support material interface -# translation: Kontaktní vrstvy podpěr -# 9 changes: Support material -# translation: Podpěry -# 10 changes: Support base diameter -# translation: Průměr podpěrné základny -msgid "Support material extruder" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4870 -#Similar to me: Support material width -# 6 changes: Support material -# translation: Podpěry -# 8 changes: Support material interface -# translation: Kontaktní vrstvy podpěr -msgid "Support material width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5070 -#Similar to me: Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set zero for automatic detection (recommended). -# 3 changes: Support material will not be generated for overhangs whose slope angle (90° = vertical) is above the given threshold. In other words, this value represent the most horizontal slope (measured from the horizontal plane) that you can print without support material. Set to zero for automatic detection (recommended). -# translation: Podpěry nebudou vytvořeny pro převisy, jejichž úhel sklonu (90° = vertikální) je nad danou prahovou hodnotou. Jinými slovy, tato hodnota představuje největší horizontální sklon (měřený od horizontální roviny), který můžete tisknout bez podpěrného materiálu. Nastavte na nulu pro automatickou detekci (doporučeno). -msgid "" -"Support material will not be generated for overhangs whose slope angle (90° " -"= vertical) is above the given threshold. In other words, this value " -"represent the most horizontal slope (measured from the horizontal plane) " -"that you can print without support material. Set zero for automatic " -"detection (recommended)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:420 -msgid "Support on thumbnail" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4983 -#Similar to me: Support pattern -# 5 changes: Support material -# translation: Podpěry -# 5 changes: Support pillar -# translation: Podpěrný pilíř -# 6 changes: Support Blocker -# translation: Blokátor podpěr -msgid "Support pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4772 -#Similar to me: Support pattern angle -# 7 changes: Support material -# translation: Podpěry -# 8 changes: Support parameter change -# translation: Změna nastavení podpěr -msgid "Support pattern angle" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5033 -#Similar to me: Support speed -# 3 changes: Support head -# translation: Hrot podpěry -# 5 changes: Support Cubic -# translation: Kubický podepíraný -# 5 changes: Supports -# translation: Podpěry -msgid "Support speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5046 -msgid "Support tower style" -msgstr "" - -#: ../../ui_layout/default/print.ui : l24 -msgid "Supporting dense layer" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3134 -#Similar to me: Supports remaining times method -# 7 changes: Supports remaining times -# translation: Podpora zbývajících tiskových časů -msgid "Supports remaining times method" -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:247 -#Similar to me: Supports work better, if the following feature is enabled:\n- overhangs with bridge speed & fan -# 24 changes: Supports work better, if the following feature is enabled:\n- Detect bridging perimeters -# translation: Podpěry fungují lépe, pokud je povolena funkce:\n- Detekovat perimetry přemostění -msgid "" -"Supports work better, if the following feature is enabled:\n" -"- overhangs with bridge speed & fan" -msgstr "" - - -#: src/slic3r/GUI/KBShortcutsDialog.cpp:164 -msgid "Switch between Tab" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:200 -msgid "Switch to Preview when sliced" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:207 -msgid "Switch when possible" -msgstr "" - - -#: src/slic3r/GUI/GUI_App.cpp:2610 -#Similar to me: Switching the language will trigger application restart.\nYou will lose content of the platter. -# 1 changes: Switching the language will trigger application restart.\nYou will lose content of the plater. -# translation: Přepnutím jazyka se aplikace restartuje.\nZtratíte obsah scény. -# 22 changes: Changing some options will trigger application restart.\nYou will lose the content of the plater. -# translation: Změnou nastavení se aplikace restartuje.\nZtratíte objekty na tiskové podložce. -msgid "" -"Switching the language will trigger application restart.\n" -"You will lose content of the platter." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:638 -msgid "Tab icon size" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:1117 -#Similar to me: Tab layout Options -# 5 changes: Layout Options -# translation: Možnosti rozložení -msgid "Tab layout Options" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:252 -msgid "Temp" -msgstr "" - - -#: src/slic3r/GUI/CalibrationRetractionDialog.cpp:63 -msgid "Temp decr:" -msgstr "" - - -#: src/slic3r/GUI/CalibrationTempDialog.cpp:60 -#Similar to me: Temperature calibration -# 4 changes: Temperature variation -# translation: Kolísání teploty -msgid "Temperature calibration" -msgstr "" - -#: ../../ui_layout/default/filament.ui -#Similar to me: Temperature °C -# 2 changes: Temperature (°C) -# translation: Teplota (°C) -# 3 changes: Temperature -# translation: Teplota -# 3 changes: Temperatures -# translation: Teploty -msgid "Temperature °C" -msgstr "" - - -#: src/slic3r/GUI/CalibrationBridgeDialog.cpp:45 -msgid "Test Flow Ratio" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:804 -msgid "Text color template" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5698 -msgid "" -"The convex holes will be grown / shrunk in the XY plane by the configured " -"value (negative = inwards, positive = outwards, should be negative as the " -"holes are always a bit smaller irl). This might be useful for fine-tuning " -"hole sizes.\n" -"This setting behaves the same as 'Inner XY size compensation' but only for " -"convex shapes. It's added to 'Inner XY size compensation', it does not " -"replace it. " -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:2627 -#, possible-boost-format -#Similar to me: The dimensions of the object from file %1% seem to be defined in inches.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of the object?" -msgid_plural "The dimensions of some objects from file %1% seem to be defined in inches.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of these objects? -# 26 changes: The dimensions of the object from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" -msgid_plural "The dimensions of some objects from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? -# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v palcích.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? -# 36 changes: The dimensions of the object from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" -msgid_plural "The dimensions of some objects from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? -# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v metrech.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? -msgid "" -"The dimensions of the object from file %1% seem to be defined in inches.\n" -"The internal unit of %2% is a millimeter. Do you want to recalculate the " -"dimensions of the object?" -msgid_plural "" -"The dimensions of some objects from file %1% seem to be defined in inches.\n" -"The internal unit of %2% is a millimeter. Do you want to recalculate the " -"dimensions of these objects?" -msgstr[0] "" -msgstr[1] "" - - -#: src/slic3r/GUI/Plater.cpp:2605 -#, possible-boost-format -#Similar to me: The dimensions of the object from file %1% seem to be defined in meters.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of the object?" -msgid_plural "The dimensions of some objects from file %1% seem to be defined in meters.\nThe internal unit of %2% is a millimeter. Do you want to recalculate the dimensions of these objects? -# 26 changes: The dimensions of the object from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" -msgid_plural "The dimensions of some objects from file %s seem to be defined in meters.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? -# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v metrech.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? -# 36 changes: The dimensions of the object from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of the object?" -msgid_plural "The dimensions of some objects from file %s seem to be defined in inches.\nThe internal unit of PrusaSlicer is a millimeter. Do you want to recalculate the dimensions of these objects? -# translation: Zdá se, že rozměry objektů ze souboru %s jsou definovány v palcích.\nInterní jednotkou PrusaSliceru je milimetr. Chcete přepočítat rozměry objektů? -msgid "" -"The dimensions of the object from file %1% seem to be defined in meters.\n" -"The internal unit of %2% is a millimeter. Do you want to recalculate the " -"dimensions of the object?" -msgid_plural "" -"The dimensions of some objects from file %1% seem to be defined in meters.\n" -"The internal unit of %2% is a millimeter. Do you want to recalculate the " -"dimensions of these objects?" -msgstr[0] "" -msgstr[1] "" - - -#: src/libslic3r/PrintConfig.cpp:4349 -msgid "The distance is computed from the brim and not from the objects" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1584 -msgid "" -"The extruder to use (unless more specific extruder settings are specified) " -"for the first layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4862 -#Similar to me: The extruder to use when printing support material (1+, 0 to use the current extruder to minimize tool changes). -# 16 changes: The extruder to use when printing support material, raft and skirt (1+, 0 to use the current extruder to minimize tool changes). -# translation: Extruder, který se používá při tisku podpěr, raftu a obrysu (1+, 0 pro použití aktuálního extruderu pro co nejméně změn nástroje). -# 33 changes: The extruder to use when printing support material interface (1+, 0 to use the current extruder to minimize tool changes). This affects raft too. -# translation: Extruder, který se použije při tisku kontaktních vrstev podpěr (1+, 0 pro použití aktuálního extruderu, aby se minimalizovaly změny nástroje). To ovlivňuje i raft. -msgid "" -"The extruder to use when printing support material (1+, 0 to use the current " -"extruder to minimize tool changes)." -msgstr "" - - -#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:187 -#Similar to me: The file does not exist. -# 4 changes: : file does not exist! -# translation: : soubor neexistuje! -# 9 changes: Directory does not exist -# translation: Adresář neexistuje -msgid "The file does not exist." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2306 -#Similar to me: The first layer will be grown / shrunk in the XY plane by the configured value to compensate for the 1st layer squish aka an Elephant Foot effect. (should be negative = inwards) -# 39 changes: The first layer will be shrunk in the XY plane by the configured value to compensate for the 1st layer squish aka an Elephant Foot effect. -# translation: První vrstva bude v rovině XY zmenšena nakonfigurovanou hodnotou, která kompenzuje rozplácnutí první vrstvy. -msgid "" -"The first layer will be grown / shrunk in the XY plane by the configured " -"value to compensate for the 1st layer squish aka an Elephant Foot effect. " -"(should be negative = inwards)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:885 -msgid "" -"The geometry will be decimated before dectecting sharp angles. This " -"parameter indicates the minimum length of the deviation for the decimation.\n" -"0 to deactivate" -msgstr "" - - -#: src/slic3r/GUI/Field.cpp:452 -msgid "" -"The infill / perimeter encroachment can't be higher than half of the " -"perimeter width.\n" -"Are you sure to use this value?" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:585 -#Similar to me: The maximum detour length for avoid crossing perimeters. If the detour is longer than this value, avoid crossing perimeters is not applied for this travel path. Detour length can be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. -# 4 changes: The maximum detour length for avoid crossing perimeters. If the detour is longer than this value, avoid crossing perimeters is not applied for this travel path. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. -# translation: Maximální délka objízdné trasy s cílem, aby nedošlo k přejetí přes perimetry. Pokud je objízdná trasa delší než tato hodnota, nebude dodrženo omezení přejíždění přes perimetry. Délka objízdné trasy může být zadána buď jako absolutní hodnota, nebo jako procento (například 50%) přímé cesty. -msgid "" -"The maximum detour length for avoid crossing perimeters. If the detour is " -"longer than this value, avoid crossing perimeters is not applied for this " -"travel path. Detour length can be specified either as an absolute value or " -"as percentage (for example 50%) of a direct travel path." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2535 -#, possible-c-format, possible-boost-format -#Similar to me: The maximum distance that each skin point can be offset (both ways), measured perpendicular to the perimeter wall.\nCan be a % of the nozzle diameter. -# 36 changes: The maximum distance that each skin point can be offset (both ways), measured perpendicular to the perimeter wall. -# translation: Maximální vzdálenost, o kterou může být každý bod pláště posunut (oběma směry), měřeno kolmo k obvodové stěně. -msgid "" -"The maximum distance that each skin point can be offset (both ways), " -"measured perpendicular to the perimeter wall.\n" -"Can be a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5893 -msgid "" -"The milling cutter to use (unless more specific extruder settings are " -"specified). " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2316 -msgid "" -"The number of layers on which the elephant foot compensation will be active. " -"The first layer will be shrunk by the elephant foot compensation value, then " -"the next layers will be gradually shrunk less, up to the layer indicated by " -"this value." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5675 -msgid "" -"The object will be grown/shrunk in the XY plane by the configured value " -"(negative = inwards, positive = outwards). This might be useful for fine-" -"tuning sizes.\n" -"This one only applies to the 'exterior' shell of the object.\n" -" !!! it's recommended you put the same value into the 'Inner XY size " -"compensation', unless you are sure you don't have horizontal holes. !!! " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5687 -#Similar to me: The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning sizes.\nThis one only applies to the 'inner' shell of the object (!!! horizontal holes break the shell !!!) -# 97 changes: The object will be grown/shrunk in the XY plane by the configured value (negative = inwards, positive = outwards). This might be useful for fine-tuning hole sizes. -# translation: Objekt bude roztažen / smrštěn v rovině XY nastavenou hodnotou (negativní = směrem dovnitř, pozitivní = směrem ven). To může být užitečné pro jemné doladění otvorů. -msgid "" -"The object will be grown/shrunk in the XY plane by the configured value " -"(negative = inwards, positive = outwards). This might be useful for fine-" -"tuning sizes.\n" -"This one only applies to the 'inner' shell of the object (!!! horizontal " -"holes break the shell !!!)" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5561 -msgid "" -"The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/" -"natural, 0.2-0.5 for white and 1 for black." -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:6119 -#Similar to me: The platter is empty.\nDo you want to save the project? -# 1 changes: The plater is empty.\nDo you want to save the project? -# translation: Tisková podložka je prázdná.\nChcete projekt uložit? -msgid "" -"The platter is empty.\n" -"Do you want to save the project?" -msgstr "" - - -#: src/slic3r/GUI/BedShapeDialog.cpp:355 -msgid "" -"The position of the model origin (point with coordinates x:0, y:0, z:0) " -"needs to be in the middle of the print bed area. If you load a custom model " -"and it appears misaligned, the origin is not set properly." -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:649 -msgid "" -"The settings have a lock and dot to show how they are modified. You can hide " -"them by uncheking this option." -msgstr "" - - -#: src/slic3r/Utils/Http.cpp:111 -#, possible-boost-format -#Similar to me: The slicer detected system SSL certificate store in: %1% -# 6 changes: PrusaSlicer detected system SSL certificate store in: %1% -# translation: PrusaSlicer detekoval úložiště SSL certifikátu v: %1% -msgid "The slicer detected system SSL certificate store in: %1%" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4247 -#Similar to me: The speed for loading of a filament into extruder after retraction (this only applies to the extruder motor). If left as zero, the retraction speed is used. -# 5 changes: The speed for loading of a filament into extruder after retraction (it only applies to the extruder motor). If left to zero, the retraction speed is used. -# translation: Rychlost vtlačení filamentu do extruderu po retrakci (vztahuje se pouze na motor extruderu). Pokud je ponecháno na nulu, použije se rychlost retrakce. -msgid "" -"The speed for loading of a filament into extruder after retraction (this " -"only applies to the extruder motor). If left as zero, the retraction speed " -"is used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4236 -#Similar to me: The speed for retractions (this only applies to the extruder motor). -# 3 changes: The speed for retractions (it only applies to the extruder motor). -# translation: Rychlost retrakce (toto nastavení platí pouze pro motor extruderu). -msgid "The speed for retractions (this only applies to the extruder motor)." -msgstr "" - - -#: src/slic3r/GUI/ConfigManipulation.cpp:88 -#, possible-c-format, possible-boost-format -msgid "" -"The Spiral Vase mode requires:\n" -"- one perimeter\n" -"- no top solid layers\n" -"- 0% fill density\n" -"- no support material\n" -"- Ensure vertical shell thickness enabled\n" -"- disabled 'no solid infill over perimeters'\n" -"- unchecked 'exact last layer height'\n" -"- unchecked 'dense infill'\n" -"- unchecked 'extra perimeters'" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4827 -#, possible-c-format, possible-boost-format -#Similar to me: The vertical distance between object and support material interface(when the support is printed on top of the object). Can be a % of the nozzle diameter.\nIf set to zero, support_material_contact_distance will be used for both top and bottom contact Z distances. -# 91 changes: The vertical distance between the object top surface and the support material interface. If set to zero, support_material_contact_distance will be used for both top and bottom contact Z distances. -# translation: Vertikální vzdálenost mezi horním povrchem objektu a podpěr. Pokud je nastavena na nulu, použije se hodnota support_material_contact_distance, která určí shodnou vzdálenost mezi podpěry a horním/spodní povrchem objektu v ose Z. -msgid "" -"The vertical distance between object and support material interface(when the " -"support is printed on top of the object). Can be a % of the nozzle " -"diameter.\n" -"If set to zero, support_material_contact_distance will be used for both top " -"and bottom contact Z distances." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4810 -#, possible-c-format, possible-boost-format -msgid "" -"The vertical distance between support material interface and the object(when " -"the object is printed on top of the support). Setting this to 0 will also " -"prevent Slic3r from using bridge flow and speed for the first object layer. " -"Can be a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5571 -msgid "" -"The volume multiplier used to compute the final volume to extrude by the " -"algorithm." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5554 -msgid "" -"The volume of melted plastic inside your nozzle. Used by 'advanced wiping'." -msgstr "" - - -#: src/libslic3r/Print.cpp:683 -#Similar to me: The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter and Repetier G-code flavors. -# 16 changes: The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors. -# translation: Čistící věž je v současné době možná pouze pro G-cody určené pro Marlin, RepRap/Sprinter, RepRapFirmware a Repetier. -msgid "" -"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " -"and Repetier G-code flavors." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1120 -msgid "" -"These parameters allow the slicer to smooth the angles in each layer. The " -"precision will be at least the new precision of the curve. Set to 0 to " -"deactivate.\n" -"Note: as it uses the polygon's edges and only works in the 2D planes, you " -"must have a very clean or hand-made 3D model.\n" -"It's really only useful to smoothen functional models or very wide angles." -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Thin extrusions acceleration" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Thin extrusions speed" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:285 src/libslic3r/ExtrusionEntity.cpp:287 -#: src/libslic3r/ExtrusionEntity.cpp:323 -msgid "Thin wall" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5176 -msgid "Thin wall merge" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5165 -msgid "Thin wall overlap" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5141 src/libslic3r/PrintConfig.cpp:5142 -#: src/libslic3r/PrintConfig.cpp:5198 -#Similar to me: Thin walls -# 4 changes: All walls -# translation: Všechny stěny -msgid "Thin walls" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5184 -msgid "Thin Walls" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5185 -msgid "Thin walls acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5152 -msgid "Thin walls min width" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5199 -msgid "Thin walls speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:623 -#Similar to me: This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S{first_layer_temperature}\" command wherever you want. -# 2 changes: This code is inserted between objects when using sequential printing. By default extruder and bed temperature are reset using non-wait command; however if M104, M109, M140 or M190 are detected in this custom code, Slic3r will not add temperature commands. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. -# translation: Tento kód je vložen mezi objekty, pokud je použit sekvenční tisk. Ve výchozím nastavení je resetován extruder a tisková podložka pomocí non-wait (nečekacím) příkazem; nicméně pokud jsou příkazy M104, M109, 140 nebo M190 detekovány v tomto vlastním kódu, Slic3r nebude přidávat teplotní příkazy. Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru, takže můžete vložit příkaz “M109 S[first_layer_temperature]” kamkoliv chcete. -msgid "" -"This code is inserted between objects when using sequential printing. By " -"default extruder and bed temperature are reset using non-wait command; " -"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " -"will not add temperature commands. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S{first_layer_temperature}\" command wherever you want." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5261 -msgid "" -"This custom code is inserted at every extruder change. If you don't leave " -"this empty, you are expected to take care of the toolchange yourself - " -"Slic3r will not output any other G-code to change the filament. You can use " -"placeholder variables for all Slic3r settings as well as {toolchange_z}, " -"{layer_z}, {layer_num}, {max_layer_z}, {previous_extruder} and " -"{next_extruder}, so e.g. the standard toolchange command can be scripted as " -"T{next_extruder}.!! Warning !!: if any character is written here, Slic3r " -"won't output any toochange command by itself." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3106 -msgid "" -"This custom code is inserted at every extrusion type change.Note that you " -"can use placeholder variables for all Slic3r settings as well as " -"{last_extrusion_role}, {extrusion_role}, {layer_num} and {layer_z}. The " -"'extrusion_role' strings can take these string values: { Perimeter, " -"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " -"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " -"SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the " -"role of the extrusion is not unique, not exactly inside another category or " -"not known." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3093 -#Similar to me: This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as {layer_num} and {layer_z}. -# 4 changes: This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Tento vlastní kód je vložen při každé změně vrstvy, hned po pohybu Z a předtím, než se extruder přesune na první bod vrstvy. Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru, stejně tak jako [layer_num] a [layer_z]. -# 59 changes: This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Tento vlastní kód je vložen pro každou změnu vrstvy, předtím než se pohne Z. Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru stejně tak jako [layer_num] a [layer_z]. -msgid "" -"This custom code is inserted at every layer change, right after the Z move " -"and before the extruder moves to the first layer point. Note that you can " -"use placeholder variables for all Slic3r settings as well as {layer_num} and " -"{layer_z}." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:611 -#Similar to me: This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as {layer_num} and {layer_z}. -# 4 changes: This custom code is inserted at every layer change, right before the Z move. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Tento vlastní kód je vložen pro každou změnu vrstvy, předtím než se pohne Z. Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru stejně tak jako [layer_num] a [layer_z]. -# 59 changes: This custom code is inserted at every layer change, right after the Z move and before the extruder moves to the first layer point. Note that you can use placeholder variables for all Slic3r settings as well as [layer_num] and [layer_z]. -# translation: Tento vlastní kód je vložen při každé změně vrstvy, hned po pohybu Z a předtím, než se extruder přesune na první bod vrstvy. Můžete přidávat zástupné proměnné pro veškeré nastavení Slic3ru, stejně tak jako [layer_num] a [layer_z]. -msgid "" -"This custom code is inserted at every layer change, right before the Z move. " -"Note that you can use placeholder variables for all Slic3r settings as well " -"as {layer_num} and {layer_z}." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1250 -#Similar to me: This end procedure is inserted at the end of the output file, before the printer end gcode (and before any toolchange from this filament in case of multimaterial printers). Note that you can use placeholder variables for all Slic3r settings. If you have multiple extruders, the gcode is processed in extruder order. -# 6 changes: This end procedure is inserted at the end of the output file, before the printer end gcode (and before any toolchange from this filament in case of multimaterial printers). Note that you can use placeholder variables for all PrusaSlicer settings. If you have multiple extruders, the gcode is processed in extruder order. -# translation: Tento kód je vložen na konec výstupního souboru před tím, než tiskárna dokončí gcode (a před všechny změny extruderu z tohoto filamentu v případě multimateriálových tiskáren). Můžete přidávat zástupné proměnné pro veškeré nastavení PrusaSliceru. Pokud máte tiskárnu s více extrudery, G-code je zpracováván v pořadí extruderů. -msgid "" -"This end procedure is inserted at the end of the output file, before the " -"printer end gcode (and before any toolchange from this filament in case of " -"multimaterial printers). Note that you can use placeholder variables for all " -"Slic3r settings. If you have multiple extruders, the gcode is processed in " -"extruder order." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1238 -#Similar to me: This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all Slic3r settings. -# 6 changes: This end procedure is inserted at the end of the output file. Note that you can use placeholder variables for all PrusaSlicer settings. -# translation: Tento kód je vložen na konec výstupního souboru. Můžete také přidávat zástupné proměnné pro veškeré nastavení PrusaSliceru. -msgid "" -"This end procedure is inserted at the end of the output file. Note that you " -"can use placeholder variables for all Slic3r settings." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5444 -#Similar to me: This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin. -# 2 changes: This experimental setting uses outputs the E values in cubic millimeters instead of linear millimeters. If your firmware doesn't already know filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] T0' in your start G-code in order to turn volumetric mode on and use the filament diameter associated to the filament selected in Slic3r. This is only supported in recent Marlin. -# translation: Toto experimentální nastavení používá výstupní hodnoty E v kubických milimetrech místo lineárních milimetrů. Pokud firmware dosud nezná průměr (průměry) filamentu, můžete v počátečním G-code zadat příkazy jako “M200 D [filament_diameter_0] T0”, pro zapnutí volumetrického režimu a použití průměru filamentu přidruženého k vybranému filamentu ve Slic3ru. Toto je podporováno pouze v posledních verzích firmwaru Marlin. -msgid "" -"This experimental setting uses outputs the E values in cubic millimeters " -"instead of linear millimeters. If your firmware doesn't already know " -"filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} " -"T0' in your start G-code in order to turn volumetric mode on and use the " -"filament diameter associated to the filament selected in Slic3r. This is " -"only supported in recent Marlin." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:748 -#Similar to me: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this.\nFor reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * (nozzle diameter) * PI/4 -# 101 changes: This factor affects the amount of plastic for bridging. You can decrease it slightly to pull the extrudates and prevent sagging, although default settings are usually good and you should experiment with cooling (use a fan) before tweaking this. -# translation: Tato hodnota určuje množství vytlačeného plastu při vytváření mostů. Mírným snížením této hodnoty můžete předejít pronášení, i když přednastavené hodnoty jsou většinou dobré a je lepší experimentovat s chlazením (využitím ventilátoru) než s touto hodnotou. -msgid "" -"This factor affects the amount of plastic for bridging. You can decrease it " -"slightly to pull the extrudates and prevent sagging, although default " -"settings are usually good and you should experiment with cooling (use a fan) " -"before tweaking this.\n" -"For reference, the default bridge flow is (in mm3/mm): (nozzle diameter) * " -"(nozzle diameter) * PI/4" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1689 -#Similar to me: This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 90% and 110%. If you think you need to change this more, check filament diameter and your firmware E steps. This print setting is multiplied against the extrusion_multiplier from the filament tab. Its only purpose is to offer the same functionality but on a per-object basis. -# 174 changes: This factor changes the amount of flow proportionally. You may need to tweak this setting to get nice surface finish and correct single wall widths. Usual values are between 0.9 and 1.1. If you think you need to change this more, check filament diameter and your firmware E steps. -# translation: Tento faktor mění poměrné množství průtoku. Možná bude třeba toto nastavení vyladit pro dosažení hezkého povrchu a správné šířky jednotlivých stěn. Obvyklé hodnoty jsou mezi 0,9 a 1,1. Pokud si myslíte, že hodnotu potřebujete změnit více, zkontrolujte průměr filamentu a E kroky ve firmwaru. -msgid "" -"This factor changes the amount of flow proportionally. You may need to tweak " -"this setting to get nice surface finish and correct single wall widths. " -"Usual values are between 90% and 110%. If you think you need to change this " -"more, check filament diameter and your firmware E steps. This print setting " -"is multiplied against the extrusion_multiplier from the filament tab. Its " -"only purpose is to offer the same functionality but on a per-object basis." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:708 -msgid "" -"This fan speed is enforced during all infill bridges. It won't slow down the " -"fan if it's currently running at a higher speed.\n" -"Set to 1 to follow default speed.\n" -"Set to -1 to disable this override (internal bridges will use Bridges fan " -"speed).\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4887 -msgid "" -"This fan speed is enforced during all support interfaces, to be able to " -"weaken their bonding with a high fan speed.\n" -"Set to 1 to disable the fan.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5283 -msgid "" -"This fan speed is enforced during all top fills.\n" -"Set to 1 to disable the fan.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:695 -msgid "" -"This fan speed is enforced during bridges and overhangs. It won't slow down " -"the fan if it's currently running at a higher speed.\n" -"Set to -1 to disable this override.\n" -"Can only be overriden by disable_fan_first_layers." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2735 -#Similar to me: This feature allows you to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy. -# 4 changes: This feature allows to combine infill and speed up your print by extruding thicker infill layers while preserving thin perimeters, thus accuracy. -# translation: Tato funkce umožňuje kombinovat výplň a urychlit tisk pomocí extruzí silnějších výplňových vrstev při zachování tenkých perimetrů, a tím i přesnosti. -msgid "" -"This feature allows you to combine infill and speed up your print by " -"extruding thicker infill layers while preserving thin perimeters, thus " -"accuracy." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4488 -#Similar to me: This feature allows you to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height. -# 4 changes: This feature allows to force a solid layer every given number of layers. Zero to disable. You can set this to any value (for example 9999); Slic3r will automatically choose the maximum possible number of layers to combine according to nozzle diameter and layer height. -# translation: Tato funkce umožňuje vynucení plné vrstvy za každý daný počet vrstev. Pro vypnutí nastavte nulu. Můžete nastavit libovolnou hodnotu (například 9999); Slic3r automaticky zvolí maximální počet vrstev, které se budou kombinovat podle průměru trysky a výšky vrstvy. -msgid "" -"This feature allows you to force a solid layer every given number of layers. " -"Zero to disable. You can set this to any value (for example 9999); Slic3r " -"will automatically choose the maximum possible number of layers to combine " -"according to nozzle diameter and layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4111 -#Similar to me: This flag enforces a retraction whenever a Z move is done (before it). -# 12 changes: This flag enforces a retraction whenever a Z move is done. -# translation: Tato možnost vyvolá retrakci, kdykoli je proveden pohyb Z. -msgid "This flag enforces a retraction whenever a Z move is done (before it)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5464 -msgid "" -"This flag will move the nozzle while retracting to minimize the possible " -"blob on leaky extruders.\n" -"Note that as a wipe only happens when there is a retraction, the 'only " -"retract when crossing perimeters' print setting can greatly reduce the " -"number of wipes." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5482 -msgid "" -"This flag will wipe the nozzle a bit inward after extruding an external " -"perimeter. The wipe_extra_perimeter is executed first, then this move inward " -"before the retraction wipe. Note that the retraction wipe will follow the " -"exact external perimeter (center) line if this parameter is disabled, and " -"will follow the inner side of the external periemter line if enabled" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5983 -msgid "" -"This increases the size of the object by a certain amount to have enough " -"plastic to mill. You can set a number of mm or a percentage of the " -"calculated optimal extra width (from flow calculation)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1627 -#Similar to me: This is only used in Slic3r interface as a visual help. -# 4 changes: This is only used in the Slic3r interface as a visual help. -# translation: Toto je v Slic3ru jako názorná pomoc. -msgid "This is only used in Slic3r interface as a visual help." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1147 -msgid "" -"This is the acceleration your printer will be reset to after the role-" -"specific acceleration values are used (perimeter/infill). \n" -"Accelerations from the left column can also be expressed as a percentage of " -"this value.\n" -"This can be expressed as a percentage (for example: 80%) over the machine " -"Max Acceleration for X axis.\n" -"Set zero to prevent resetting acceleration at all." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:656 -#, possible-c-format, possible-boost-format -#Similar to me: This is the acceleration your printer will use for bridges.\nCan be a % of the default acceleration\nSet zero to use default acceleration for bridges. -# 51 changes: This is the acceleration your printer will use for bridges. Set zero to disable acceleration control for bridges. -# translation: Toto je zrychlení, které vaše tiskárna použije při vytváření mostů. Nastavením na nulu vypnete ovládání akcelerace pro mosty. -msgid "" -"This is the acceleration your printer will use for bridges.\n" -"Can be a % of the default acceleration\n" -"Set zero to use default acceleration for bridges." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:871 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for brim and skirt. \n" -"Can be a % of the support acceleration\n" -"Set zero to use support acceleration." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1470 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for external perimeters. \n" -"Can be a % of the internal perimeter acceleration\n" -"Set zero to use internal perimeter acceleration for external perimeters." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2370 -#Similar to me: This is the acceleration your printer will use for first layer of object above raft interface.\nIf set to %, all accelerations will be reduced by that ratio.\nSet zero to disable acceleration control for first layer of object above raft interface. -# 64 changes: This is the acceleration your printer will use for first layer of object above raft interface. Set zero to disable acceleration control for first layer of object above raft interface. -# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu objektu nad raftem. Nastavením nuly vypnete řízení zrychlení pro první vrstvu objektu nad raftem. -msgid "" -"This is the acceleration your printer will use for first layer of object " -"above raft interface.\n" -"If set to %, all accelerations will be reduced by that ratio.\n" -"Set zero to disable acceleration control for first layer of object above " -"raft interface." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2568 -msgid "" -"This is the acceleration your printer will use for gap fills. \n" -"This can be expressed as a percentage over the perimeter acceleration.\n" -"Set zero to use perimeter acceleration for gap fills." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:670 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for internal bridges. \n" -"Can be a % of the default acceleration\n" -"Set zero to use bridge acceleration for internal bridges." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3779 -#, possible-c-format, possible-boost-format -#Similar to me: This is the acceleration your printer will use for internal perimeters. \nCan be a % of the default acceleration\nSet zero to use default acceleration for internal perimeters. -# 69 changes: This is the acceleration your printer will use for perimeters. Set zero to disable acceleration control for perimeters. -# translation: Toto je zrychlení, které vaše tiskárna použije pro perimetry. Nastavením na nulu vypnete ovládání akcelerace pro perimetry. -msgid "" -"This is the acceleration your printer will use for internal perimeters. \n" -"Can be a % of the default acceleration\n" -"Set zero to use default acceleration for internal perimeters." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3024 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for ironing. \n" -"Can be a % of the top solid infill acceleration\n" -"Set zero to use top solid infill acceleration for ironing." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3665 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for overhangs.\n" -"Can be a % of the bridge acceleration\n" -"Set zero to to use bridge acceleration for overhangs." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4684 -#, possible-c-format, possible-boost-format -#Similar to me: This is the acceleration your printer will use for solid infills. \nCan be a % of the default acceleration\nSet zero to use default acceleration for solid infills. -# 65 changes: This is the acceleration your printer will use for infill. Set zero to disable acceleration control for infill. -# translation: Toto je zrychlení, které vaše tiskárna použije pro výplň. Nastavte nulu, chcete-li vypnout řízení zrychlení pro výplň. -msgid "" -"This is the acceleration your printer will use for solid infills. \n" -"Can be a % of the default acceleration\n" -"Set zero to use default acceleration for solid infills." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2722 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for Sparse infill.\n" -"Can be a % of the solid infill acceleration\n" -"Set zero to use solid infill acceleration for infill." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4747 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for support material " -"interfaces. \n" -"Can be a % of the support material acceleration\n" -"Set zero to use support acceleration for support material interfaces." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4725 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for support material. \n" -"Can be a % of the default acceleration\n" -"Set zero to use default acceleration for support material." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5187 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for thin walls. \n" -"Can be a % of the external perimeter acceleration\n" -"Set zero to use external perimeter acceleration for thin walls." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5331 -#, possible-c-format, possible-boost-format -msgid "" -"This is the acceleration your printer will use for top solid infills. \n" -"Can be a % of the solid infill acceleration\n" -"Set zero to use solid infill acceleration for top solid infills." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:379 -msgid "This is the color that will be enforced on objects in the thumbnails." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1722 -msgid "" -"This is the DEFAULT extrusion spacing. It's convert to a width and this " -"width can be used to REPLACE 0-width fields. It's useless when all width " -"fields have a value.Like Default extrusion width but spacing is the distance " -"between two lines (as they overlap a bit, it's not the same).\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1703 -msgid "" -"This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width " -"fields. It's useless when all other width fields have a value.\n" -"Set this to a non-zero value to allow a manual extrusion width. If left to " -"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " -"tooltips for perimeter extrusion width, infill extrusion width etc). If " -"expressed as percentage (for example: 105%), it will be computed over nozzle " -"diameter.\n" -"You can set either 'Spacing', or 'Width'; the other will be calculated, " -"using the perimeter 'Overlap' percentages and default layer height." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5909 -msgid "This is the diameter of your cutting tool." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3372 -#, possible-c-format, possible-boost-format -#Similar to me: This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. \nCan be a % of the nozzle diameter.\nIf set to 0, layer height is limited to 75% of the nozzle diameter. -# 38 changes: This is the highest printable layer height for this extruder, used to cap the variable layer height and support layer height. Maximum recommended layer height is 75% of the extrusion width to achieve reasonable inter-layer adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter. -# translation: Toto je největší možná výška vrstvy pro tento extruder, který se používá k zakrytí výšky proměnné vrstvy a výšky podpůrné vrstvy. Maximální doporučená výška vrstvy činí 75% šířky vytlačování, aby se dosáhlo přiměřené přilnavosti mezi vrstvami. Pokud je nastavena hodnota 0, je výška vrstvy omezena na 75% průměru trysky. -msgid "" -"This is the highest printable layer height for this extruder, used to cap " -"the variable layer height and support layer height. Maximum recommended " -"layer height is 75% of the extrusion width to achieve reasonable inter-layer " -"adhesion. \n" -"Can be a % of the nozzle diameter.\n" -"If set to 0, layer height is limited to 75% of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3475 -#, possible-c-format, possible-boost-format -#Similar to me: This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm.\nCan be a % of the nozzle diameter. -# 36 changes: This is the lowest printable layer height for this extruder and limits the resolution for variable layer height. Typical values are between 0.05 mm and 0.1 mm. -# translation: Nejmenší tisknutelná výška vrstvy pro tento extruder. Omezuje rozlišení pro výšku proměnné vrstvy. Typické hodnoty jsou mezi 0,05 mm a 0,1 mm. -msgid "" -"This is the lowest printable layer height for this extruder and limits the " -"resolution for variable layer height. Typical values are between 0.05 mm and " -"0.1 mm.\n" -"Can be a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2357 -#Similar to me: This is the maximum acceleration your printer will use for first layer.\nIf set to %, all accelerations will be reduced by that ratio.\nSet zero to disable acceleration control for first layer. -# 72 changes: This is the acceleration your printer will use for first layer. Set zero to disable acceleration control for first layer. -# translation: Toto je zrychlení, které vaše tiskárna použije pro první vrstvu. Nastavte nulu pro vypnutí řízení zrychlení pro první vrstvu. -msgid "" -"This is the maximum acceleration your printer will use for first layer.\n" -"If set to %, all accelerations will be reduced by that ratio.\n" -"Set zero to disable acceleration control for first layer." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2344 -msgid "" -"This is the percentage of the flow that is used for the second ironing pass. " -"Typical 10-20%. Should not be higher than 20%, unless you have your top " -"extrusion width greatly superior to your nozzle width. A value too low and " -"your extruder will eat the filament. A value too high and the first pass " -"won't print well." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1177 -msgid "" -"This is the reference speed that other 'main' speed can reference to by a " -"%.\n" -"This setting doesn't do anything by itself, and so is deactivated unless a " -"speed depends on it (a % from the left column).\n" -"This can be expressed as a percentage (for example: 80%) over the machine " -"Max Feedrate for X axis.\n" -"Set zero to use autospeed for speed fields using a % of this setting." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3536 -msgid "" -"This is the rounding error of the input object. It's used to align points " -"that should be in the same line.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2329 -msgid "" -"This is the width of the ironing pass, in a % of the top infill extrusion " -"width, should not be more than 50% (two times more lines, 50% overlap). It's " -"not necessary to go below 25% (four times more lines, 75% overlap). \n" -"If you have problems with your ironing process, don't forget to look at the " -"flow->above bridge flow, as this setting should be set to min 110% to let " -"you have enough plastic in the top layer. A value too low will make your " -"extruder eat the filament." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1660 -msgid "" -"This offset wil be added to all fan values set in the filament properties. " -"It won't make them go higher than 100% nor lower than 0%." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1649 -msgid "" -"This offset will be added to all extruder temperatures set in the filament " -"settings.\n" -"Note that you should set 'M104 S{first_layer_temperature{initial_extruder} + " -"extruder_temperature_offset{initial_extruder}}'\n" -"instead of 'M104 S{first_layer_temperature}' in the start_gcode" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2947 -#Similar to me: This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, this slows down the G-code generation due to the multiple checks involved. -# 5 changes: This option will limit infill to the areas actually needed for supporting ceilings (it will act as internal support material). If enabled, slows down the G-code generation due to the multiple checks involved. -# translation: Tato volba omezuje výplň na plochy skutečně potřebné pro podpěru stropů (bude se chovat jako vnitřní podpěrný materiál). Je-li tato volba zapnuta, zpomaluje generování G-code kvůli několikanásobným kontrolám. -msgid "" -"This option will limit infill to the areas actually needed for supporting " -"ceilings (it will act as internal support material). If enabled, this slows " -"down the G-code generation due to the multiple checks involved." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1386 -#, possible-c-format, possible-boost-format -msgid "" -"This parameter grows the bridged solid infill layers by the specified mm to " -"anchor them into the sparse infill and over the perimeters below. Put 0 to " -"deactivate it. Can be a % of the width of the external perimeter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1374 -#, possible-c-format, possible-boost-format -msgid "" -"This parameter grows the top/bottom/solid layers by the specified mm to " -"anchor them into the sparse infill and support the perimeters above. Put 0 " -"to deactivate it. Can be a % of the width of the perimeters." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:921 -#Similar to me: This separate setting will affect the speed of brim and skirt. \nIf expressed as percentage (for example: 80%) it will be calculated over the Support speed setting.\nSet zero to use autospeed for this feature. -# 74 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Toto oddělené nastavení ovlivní rychlost tisku vnějších perimetrů (těch viditelných). Pokud je hodnota vyjádřena procenty (například: 80%), bude rychlost vypočítána z hodnoty rychlosti tisku perimetrů, nastavené výše. Nastavte nulu pro automatický výpočet. -# 83 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Toto oddělené nastavení ovlivní rychlost perimetrů o poloměru <= 6,5 mm (obvykle díry). Pokud je vyjádřeno jako procentní podíl (například: 80%), vypočte se z výše uvedeného nastavení rychlosti perimetrů. Pro automatické nastavení zadejte nulu. -msgid "" -"This separate setting will affect the speed of brim and skirt. \n" -"If expressed as percentage (for example: 80%) it will be calculated over the " -"Support speed setting.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1484 -#Similar to me: This separate setting will affect the speed of external perimeters (the visible ones). \nIf expressed as percentage (for example: 80%) it will be calculated over the Internal Perimeters speed setting.\nSet zero to use autospeed for this feature. -# 45 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Toto oddělené nastavení ovlivní rychlost tisku vnějších perimetrů (těch viditelných). Pokud je hodnota vyjádřena procenty (například: 80%), bude rychlost vypočítána z hodnoty rychlosti tisku perimetrů, nastavené výše. Nastavte nulu pro automatický výpočet. -# 79 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Toto oddělené nastavení ovlivní rychlost perimetrů o poloměru <= 6,5 mm (obvykle díry). Pokud je vyjádřeno jako procentní podíl (například: 80%), vypočte se z výše uvedeného nastavení rychlosti perimetrů. Pro automatické nastavení zadejte nulu. -msgid "" -"This separate setting will affect the speed of external perimeters (the " -"visible ones). \n" -"If expressed as percentage (for example: 80%) it will be calculated over the " -"Internal Perimeters speed setting.\n" -"Set zero to use autospeed for this feature." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4420 -#Similar to me: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes).\nIf expressed as percentage (for example: 80%) it will be calculated on the Internal Perimeters speed setting above.\nSet zero to disable. -# 25 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Toto oddělené nastavení ovlivní rychlost perimetrů o poloměru <= 6,5 mm (obvykle díry). Pokud je vyjádřeno jako procentní podíl (například: 80%), vypočte se z výše uvedeného nastavení rychlosti perimetrů. Pro automatické nastavení zadejte nulu. -# 59 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. -# translation: Toto oddělené nastavení ovlivní rychlost tisku vnějších perimetrů (těch viditelných). Pokud je hodnota vyjádřena procenty (například: 80%), bude rychlost vypočítána z hodnoty rychlosti tisku perimetrů, nastavené výše. Nastavte nulu pro automatický výpočet. -msgid "" -"This separate setting will affect the speed of perimeters having radius <= " -"6.5mm (usually holes).\n" -"If expressed as percentage (for example: 80%) it will be calculated on the " -"Internal Perimeters speed setting above.\n" -"Set zero to disable." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4447 -#, possible-c-format, possible-boost-format -msgid "" -"This sets the end of the threshold for small perimeter length. Every " -"perimeter loop lower than this will see their speed reduced a bit, from " -"their normal speed at this length down to small perimeter speed.\n" -"Can be a mm or a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4433 -#, possible-c-format, possible-boost-format -msgid "" -"This sets the threshold for small perimeter length. Every loop with a length " -"lower than this will be printed at small perimeter speed\n" -"Can be a mm value or a % of the nozzle diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:722 -msgid "" -"This setting allow you to choose the base for the bridge flow compute, the " -"result will be multiplied by the bridge flow to have the final result.\n" -"A bridge is an extrusion with nothing under it to flatten it, and so it " -"can't have a 'rectangle' shape but a circle one.\n" -" * The default way to compute a bridge flow is to use the nozzle diameter as " -"the diameter of the extrusion cross-section. It shouldn't be higher than " -"that to prevent sagging.\n" -" * A second way to compute a bridge flow is to use the current layer height, " -"so it shouldn't protrude below it. Note that may create too thin extrusions " -"and so a bad bridge quality.\n" -" * A Third way to compute a bridge flow is to continue to use the current " -"flow/section (mm3 per mm). If there is no current flow, it will use the " -"solid infill one. To use if you have some difficulties with the big flow " -"changes from perimeter and infill flow to bridge flow and vice-versa, the " -"bridge flow ratio let you compensate for the change in speed. \n" -"The preview will display the expected shape of the bridge extrusion " -"(cylinder), don't expect a magical thick and solid air to flatten the " -"extrusion magically." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3417 -#, possible-c-format, possible-boost-format -msgid "" -"This setting allow you to set the desired flow rate for the autospeed " -"algorithm. It tries to keep a constant feedrate for the entire object.\n" -"The autospeed is only enable on speed field that have a value of 0. If a " -"speed field is a % of a 0 field, then it will be a % of the value it should " -"have got from the autospeed.\n" -"If this field is set to 0, then there is no autospeed. If a speed value i " -"still set to 0, it will get the max speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5234 -#, possible-c-format -msgid "" -"This setting allows you to modify the time estimation by a % amount. As " -"Slic3r only uses the Marlin algorithm, it's not precise enough if another " -"firmware is used." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5252 -msgid "" -"This setting allows you to modify the time estimation by a flat amount for " -"each toolchange." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5243 -msgid "" -"This setting allows you to modify the time estimation by a flat amount to " -"compensate for start script, the homing routine, and other things." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4469 -#, possible-c-format, possible-boost-format -msgid "" -"This setting allows you to reduce the overlap between the lines of the solid " -"fill, to reduce the % filled if you see overextrusion signs on solid areas. " -"Note that you should be sure that your flow (filament extrusion multiplier) " -"is well calibrated and your filament max overlap is set before thinking to " -"modify this." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1458 -#, possible-c-format -msgid "" -"This setting allows you to reduce the overlap between the perimeters and the " -"external one, to reduce the impact of the perimeters' artifacts. 100% means " -"that no gap is left, and 0% means that the external perimeter isn't " -"contributing to the overlap with the 'inner' one." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2600 -#, possible-c-format -msgid "" -"This setting allows you to reduce the overlap between the perimeters and the " -"gap fill. 100% means that no gaps are left, and 0% means that the gap fill " -"won't touch the perimeters.\n" -"May be useful if you can see the gapfill on the exterrnal surface, to reduce " -"that artifact." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3879 -#, possible-c-format -msgid "" -"This setting allows you to reduce the overlap between the perimeters, to " -"reduce the impact of the perimeters' artifacts. 100% means that no gap is " -"left, and 0% means that perimeters are not touching each other anymore.\n" -"It's very experimental, please report about the usefulness. It may be " -"removed if there is no use for it." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5225 -msgid "" -"This setting allows you to set how much an hour of printing time is costing " -"you in printer maintenance, loan, human albor, etc." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2956 -#Similar to me: This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width.\nDon't put a value higher than 50% (of the perimeter width), as it will fuse with it and follow the perimeter. -# 111 changes: This setting applies an additional overlap between infill and perimeters for better bonding. Theoretically this shouldn't be needed, but backlash might cause gaps. If expressed as percentage (example: 15%) it is calculated over perimeter extrusion width. -# translation: Toto nastavení uplatňuje dodatečné překrytí mezi výplní a obvodem pro lepší spojení. Teoreticky by to nemělo být potřeba, ale reakce by mohla způsobit mezery. Pokud je vyjádřeno procenty (například: 15%), vypočítá se z šířky extruze perimetrů. -msgid "" -"This setting applies an additional overlap between infill and perimeters for " -"better bonding. Theoretically this shouldn't be needed, but backlash might " -"cause gaps. If expressed as percentage (example: 15%) it is calculated over " -"perimeter extrusion width.\n" -"Don't put a value higher than 50% (of the perimeter width), as it will fuse " -"with it and follow the perimeter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3402 -#, possible-c-format, possible-boost-format -msgid "" -"This setting control by how much the speed can be reduced to increase the " -"layer time. It's a maximum reduction, so a lower value makes the minimum " -"speed higher. Set to 90% if you don't want the speed to go below 10% of the " -"current speed.\n" -"Set zero to disable" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3121 -msgid "" -"This setting controls the height of last object layers to put the last layer " -"at the exact highest height possible. Experimental." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1826 -msgid "" -"This setting is used to set the maximum speed when extruding inside the wipe " -"tower (use M220). In %, set 0 to disable and use the Filament type instead.\n" -"If disabled, these filament types will have a defaut value of:\n" -" - PVA: 80% to 60%\n" -" - SCAFF: 35%\n" -" - FLEX: 35%\n" -" - OTHERS: 100%\n" -"Note that the wipe tower reset the speed at 100% for the unretract in any " -"case.\n" -"If using marlin, M220 B/R is used to save the speed override before the wipe " -"tower print." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3793 -msgid "" -"This setting may slightly degrade the quality of your external perimeter, in " -"exchange for a better bonding between perimeters.Use it if you have great " -"difficulties with perimeter bonding, for example with high temperature " -"filaments.\n" -"This percentage is the % of overlap between perimeters, a bit like " -"perimeter_overlap and external_perimeter_overlap, but in reverse. You have " -"to set perimeter_overlap and external_perimeter_overlap to 100%, or this " -"setting has no effect. 0: no effect, 50%: half of the nozzle will be over an " -"already extruded perimeter while extruding a new one, unless it's an " -"external one).\n" -"It's very experimental, please report about the usefulness. It may be " -"removed if there is no use for it." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3455 -msgid "" -"This setting represents the base fan speed this filament needs, or at least " -"the minimum PWM your fan needs to work." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3360 -msgid "" -"This setting represents the maximum speed of your fan, used when the layer " -"print time is Very short." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2590 -#, possible-c-format, possible-boost-format -msgid "" -"This setting represents the minimum mm² for a gapfill extrusion to be " -"created.\n" -"Can be a % of (perimeter width)²" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5994 -#, possible-c-format, possible-boost-format -msgid "" -"This setting restricts the post-process milling to a certain height, to " -"avoid milling the bed. It can be a mm or a % of the first layer height (so " -"it can depend on the object)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2075 -msgid "" -"This setting will ensure that all 'overlap' are not higher than this value. " -"This is useful for filaments that are too viscous, as the line can't flow " -"under the previous one." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4614 -#Similar to me: This start procedure is inserted at the beginning, after any printer start gcode (and after any toolchange to this filament in case of multi-material printers). This is used to override settings for a specific filament. If Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S{first_layer_temperature}\" command wherever you want. If you have multiple extruders, the gcode is processed in extruder order. -# 14 changes: This start procedure is inserted at the beginning, after any printer start gcode (and after any toolchange to this filament in case of multi-material printers). This is used to override settings for a specific filament. If PrusaSlicer detects M104, M109, M140 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. If you have multiple extruders, the gcode is processed in extruder order. -# translation: Tento kód je vložen na začátek tisku. Jakmile tiskárna začne zpracovávat gcode (a po jakékoliv změně extruderu na tento filament v případě multimateriálového tisku). Slouží k přepsání nastavení pro konkrétní filament. Pokud PrusaSlicer detekuje příkazy M104, M109, M140 nebo M190 v uživatelsky definovaném kódu, tyto příkazy nebudou automaticky připojeny, takže si můžete přizpůsobit pořadí příkazů předehřevu a dalších vlastních akcí. Také můžete přidávat zástupné proměnné pro veškeré nastavení PrusaSliceru, takže můžete vložit příkaz “M109 S[first_layer_temperature]” kamkoliv chcete. Pokud máte tiskárnu s více extrudery, G-code je zpracováván v pořadí extruderů. -# 220 changes: This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If PrusaSlicer detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. -# translation: Tento kód je vložen na začátek tisku. Po okamžiku dosažení požadované teploty podložky a začátku nahřívání extruderu a před dokončení předehřevu trysky. Pokud PrusaSlicer detekuje příkazy M104, M190 v uživatelsky definovaném kódu, tyto příkazy nebudou automaticky připojeny, takže si můžete přizpůsobit pořadí příkazů předehřevu a dalších vlastních akcí. Také můžete přidávat zástupné proměnné pro veškeré nastavení PrusaSliceru, takže můžete vložit příkaz “M109 S[first_layer_temperature]” kamkoliv chcete. -msgid "" -"This start procedure is inserted at the beginning, after any printer start " -"gcode (and after any toolchange to this filament in case of multi-material " -"printers). This is used to override settings for a specific filament. If " -"Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " -"will not be prepended automatically so you're free to customize the order of " -"heating commands and other custom actions. Note that you can use placeholder " -"variables for all Slic3r settings, so you can put a \"M109 " -"S{first_layer_temperature}\" command wherever you want. If you have multiple " -"extruders, the gcode is processed in extruder order." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4588 -#Similar to me: This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder has just started heating, but before extruder has finished heating. If Slic3r detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all Slic3r settings, so you can put a \"M109 S{first_layer_temperature}\" command wherever you want.\n placeholders: initial_extruder, total_layer_count, has_wipe_tower, has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx,miny,maxx,maxy] -# 187 changes: This start procedure is inserted at the beginning, after bed has reached the target temperature and extruder just started heating, and before extruder has finished heating. If PrusaSlicer detects M104 or M190 in your custom codes, such commands will not be prepended automatically so you're free to customize the order of heating commands and other custom actions. Note that you can use placeholder variables for all PrusaSlicer settings, so you can put a \"M109 S[first_layer_temperature]\" command wherever you want. -# translation: Tento kód je vložen na začátek tisku. Po okamžiku dosažení požadované teploty podložky a začátku nahřívání extruderu a před dokončení předehřevu trysky. Pokud PrusaSlicer detekuje příkazy M104, M190 v uživatelsky definovaném kódu, tyto příkazy nebudou automaticky připojeny, takže si můžete přizpůsobit pořadí příkazů předehřevu a dalších vlastních akcí. Také můžete přidávat zástupné proměnné pro veškeré nastavení PrusaSliceru, takže můžete vložit příkaz “M109 S[first_layer_temperature]” kamkoliv chcete. -msgid "" -"This start procedure is inserted at the beginning, after bed has reached the " -"target temperature and extruder has just started heating, but before " -"extruder has finished heating. If Slic3r detects M104 or M190 in your custom " -"codes, such commands will not be prepended automatically so you're free to " -"customize the order of heating commands and other custom actions. Note that " -"you can use placeholder variables for all Slic3r settings, so you can put a " -"\"M109 S{first_layer_temperature}\" command wherever you want.\n" -" placeholders: initial_extruder, total_layer_count, has_wipe_tower, " -"has_single_extruder_multi_material_priming, total_toolchanges, " -"bounding_box[minx,miny,maxx,maxy]" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:806 -msgid "This template will be used for drawing button text on hover." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:8419 -#Similar to me: This version of Slic3r may not understand configurations produced by the newest Slic3r versions. For example, newer Slic3r may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. -# 18 changes: This version of PrusaSlicer may not understand configurations produced by the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. -# translation: Tato verze PrusaSliceru nemusí být kompatibilní s konfiguracemi vytvořenými nejnovějšími verzemi PrusaSliceru. Novější verze PrusaSliceru mohou například rozšířit seznam podporovaných druhů firmwaru. Lze se rozhodnout, že to budeme ignorovat, nebo že neznámou hodnotu nahradíme výchozí hodnotou. -msgid "" -"This version of Slic3r may not understand configurations produced by the " -"newest Slic3r versions. For example, newer Slic3r may extend the list of " -"supported firmware flavors. One may decide to bail out or to substitute an " -"unknown value with a default silently or verbosely." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5707 -msgid "Threshold" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "threshold for" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:377 -msgid "Thumbnail color" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Thumbnail options" -msgstr "" - -#: ../../ui_layout/default/printer_fff.ui -msgid "Thumbnails" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:367 -msgid "Thumbnails size" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:253 -#Similar to me: time -# 1 changes: Time -# translation: Čas -# 1 changes: Lime -# translation: Limetková -msgid "time" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5223 -msgid "Time cost" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:3022 src/libslic3r/PrintConfig.cpp:5232 -msgid "Time estimation compensation" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5241 -msgid "Time for start custom gcode" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5250 -msgid "Time for toolchange" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4295 -#, possible-c-format, possible-boost-format -msgid "" -"To avoid visible seam, the extrusion can be stoppped a bit before the end of " -"the loop.\n" -"Can be a mm or a % of the current extruder diameter." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1928 -msgid "" -"To further reduce stringing, it can be helpful to set a lower temperature " -"just prior to extracting filament from the hotend." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5273 -#Similar to me: Tool name -# 3 changes: Tool type -# translation: Typ nástroje -msgid "Tool name" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5916 -#Similar to me: Tool offset -# 4 changes: Z offset -# translation: Odsazení Z -msgid "Tool offset" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5937 -msgid "Tool z lift" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5928 -msgid "Tool z offset" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:1174 -#Similar to me: Tool/C -# 2 changes: Tool -# translation: Nástroj -# 2 changes: Tool # -# translation: Nástroj # -msgid "Tool/C" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1874 -msgid "Toolchange part fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1927 -#Similar to me: Toolchange temperature -# 8 changes: Nozzle temperature -# translation: Teplota trysky -msgid "Toolchange temperature" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1853 -msgid "Toolchange temperature enabled" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5281 -#Similar to me: Top fan speed -# 5 changes: Fan speed -# translation: Rychlost ventilátoru -msgid "Top fan speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2281 -#Similar to me: Top fill -# 2 changes: Gap fill -# translation: Výplň tenkých stěn -# 3 changes: Top View -# translation: Pohled svrchu -msgid "Top fill" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2282 -msgid "Top fill flow ratio" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1272 -#Similar to me: Top fill Pattern -# 1 changes: Top fill pattern -# translation: Vzor výplně horní vrstvy -# 6 changes: Bottom fill pattern -# translation: Vzor spodní výplně -# 6 changes: Fill pattern -# translation: Vzor výplně -msgid "Top fill Pattern" -msgstr "" - - -#: src/slic3r/GUI/CalibrationOverBridgeDialog.cpp:31 -msgid "Top flow calibration" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: top infill -# 4 changes: Gap fill -# translation: Výplň tenkých stěn -# 4 changes: infill -# translation: výplň -# 4 changes: Solid infill -# translation: Plná výplň -msgid "top infill" -msgstr "" - -#: ../../ui_layout/default/print.ui : l23 -#Similar to me: Top infill pattern -# 2 changes: Top fill pattern -# translation: Vzor výplně horní vrstvy -# 6 changes: Bottom fill pattern -# translation: Vzor spodní výplně -# 7 changes: Fill pattern -# translation: Vzor výplně -msgid "Top infill pattern" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5359 -#Similar to me: Top layers -# 4 changes: Add Layers -# translation: Přidat Vrstvy -# 4 changes: layers -# translation: vrstva(y) -# 4 changes: Raft layers -# translation: Vrstev raftu -msgid "Top layers" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5342 -msgid "Top solid" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5328 -msgid "Top solid " -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5329 -msgid "Top solid acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5313 -#Similar to me: Top solid spacing -# 6 changes: Top solid infill -# translation: Vrchní plné výplně -# 6 changes: Top solid layers -# translation: Vrchních plných vrstev -msgid "Top solid spacing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5343 -#Similar to me: Top solid speed -# 5 changes: Top solid layers -# translation: Vrchních plných vrstev -# 6 changes: Top solid infill -# translation: Vrchní plné výplně -msgid "Top solid speed" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:6180 -msgid "Tough" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5382 -msgid "Travel acceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:4283 -msgid "Travel cost" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5404 -msgid "Travel speed" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Tuning ironing" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5741 -#Similar to me: Twisting -# 3 changes: Editing -# translation: Editace -# 3 changes: Printing -# translation: Tisk -msgid "Twisting" -msgstr "" - - -#: src/slic3r/GUI/Tab.cpp:4914 -#Similar to me: UNLOCKED LOCK icon indicates that the values this widget control were changed and at least one is not equal to the system (or default) value.\nClick to reset current all values to the system (or default) values. -# 43 changes: UNLOCKED LOCK icon indicates that the value was changed and is not equal to the system (or default) value.\nClick to reset current value to the system (or default) value. -# translation: Ikona ODEMKNUTÉHO ZÁMKU indikuje, že se hodnota změnila a není shodná se systémovou (nebo výchozí) hodnotou.\nKlikněte pro reset současné hodnoty na systémovou hodnotu. -msgid "" -"UNLOCKED LOCK icon indicates that the values this widget control were " -"changed and at least one is not equal to the system (or default) value.\n" -"Click to reset current all values to the system (or default) values." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3216 -#Similar to me: Use also for time estimate -# 5 changes: Use for time estimate -# translation: Použít pro odhad času -msgid "Use also for time estimate" -msgstr "" - - -#: src/slic3r/GUI/Preferences.cpp:656 -msgid "Use custom tooltip" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3217 -msgid "Use only as safeguards" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3615 -msgid "" -"Use only one perimeter on first layer, to give more space to the top infill " -"pattern." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3622 -msgid "" -"Use only one perimeter on flat top surface, to give more space to the top " -"infill pattern." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1867 -msgid "Use part fan to cool hotend" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5396 -msgid "Use target acceleration for travel deceleration" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1670 -#Similar to me: Use this option to set the axis letter associated with your printer's extruder (usually E but some printers use A). -# 3 changes: Use this option to set the axis letter associated to your printer's extruder (usually E but some printers use A). -# translation: Touto volbou nastavíte písmeno osy přidružené k extruderu tiskárny (obvykle E, ale některé tiskárny používají A). -msgid "" -"Use this option to set the axis letter associated with your printer's " -"extruder (usually E but some printers use A)." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:1919 -msgid "usually not necessary to change this" -msgstr "" - - -#: src/slic3r/GUI/ButtonsDescription.cpp:58 -msgid "Value is the same as the last saved preset, but is not the system value" -msgstr "" - - -#: src/slic3r/GUI/ButtonsDescription.cpp:61 -msgid "Value isn't taken into account, it's computed over an other field." -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui : l16 -msgid "vertical" -msgstr "" - -#: ../../ui_layout/default/print.ui -msgid "Vertical Hole shrinking compensation" -msgstr "" - -#: ../../ui_layout/default/filament.ui -msgid "Very short layer time - began to decrease extrusion rate" -msgstr "" - - -#: src/slic3r/GUI/GUI_Preview.cpp:256 -msgid "Vol. flow" -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3415 -msgid "Volumetric speed for Autospeed" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:52 -msgid "Voron Cube" -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:54 -msgid "" -"Voron cubic cube with many features inside, with a bearing slot on top. " -"Better to check dimensional accuracy." -msgstr "" - -#: ../../ui_layout/default/print.ui : l4 -#Similar to me: Wall Thickness -# 1 changes: Wall thickness -# translation: Tloušťka stěny -msgid "Wall Thickness" +"This is the acceleration your printer will use for Sparse infill.\n" +"Can be a % of the solid infill acceleration\n" +"Set zero to use solid infill acceleration for infill." msgstr "" -#: src/slic3r/GUI/FreeCADDialog.cpp:255 +#: src/libslic3r/PrintConfig.cpp:4763 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for support material interfaces. \nCan be a % of the support material acceleration\nSet zero to use support acceleration for support material interfaces. +# 65 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 72 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. +# 73 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. msgid "" -"What to do with the result? insert it into the existing platter or replacing " -"the current platter by a new one?" +"This is the acceleration your printer will use for support material " +"interfaces. \n" +"Can be a % of the support material acceleration\n" +"Set zero to use support acceleration for support material interfaces." msgstr "" -#: src/libslic3r/PrintConfig.cpp:3191 +#: src/libslic3r/PrintConfig.cpp:4741 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for support material. \nCan be a % of the default acceleration\nSet zero to use default acceleration for support material. +# 34 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 37 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. +# 38 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. msgid "" -"When an extruder travels to an object (from the start position or from an " -"object to another), the nozzle height is guaranteed to be at least at this " -"value.\n" -"It's made to ensure the nozzle won't hit clips or things you have on your " -"bed. But be careful to not put a clip in the 'convex shape' of an object.\n" -"Set to 0 to disable." +"This is the acceleration your printer will use for support material. \n" +"Can be a % of the default acceleration\n" +"Set zero to use default acceleration for support material." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:202 +#: src/libslic3r/PrintConfig.cpp:5203 +#, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for thin walls. \nCan be a % of the external perimeter acceleration\nSet zero to use external perimeter acceleration for thin walls. +# 55 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 61 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 62 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"When an object is sliced, it will switch your view from the curent view to " -"the preview (and then gcode-preview) automatically, depending on the option " -"choosen." +"This is the acceleration your printer will use for thin walls. \n" +"Can be a % of the external perimeter acceleration\n" +"Set zero to use external perimeter acceleration for thin walls." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:395 +#: src/libslic3r/PrintConfig.cpp:5347 #, possible-c-format, possible-boost-format +#Similar to me: This is the acceleration your printer will use for top solid infills. \nCan be a % of the solid infill acceleration\nSet zero to use solid infill acceleration for top solid infills. +# 45 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 53 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. +# 57 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. msgid "" -"when printing %s with a volumetric rate of %3.2f mm³/s at filament speed " -"%3.2f mm/s." +"This is the acceleration your printer will use for top solid infills. \n" +"Can be a % of the solid infill acceleration\n" +"Set zero to use solid infill acceleration for top solid infills." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1043 +#: src/libslic3r/PrintConfig.cpp:1704 +#Similar to me: This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width fields. It's useless when all other width fields have a value.\nSet this to a non-zero value to allow a manual extrusion width. If left to zero, Slic3r derives extrusion widths from the nozzle diameter (see the tooltips for perimeter extrusion width, infill extrusion width etc). If expressed as percentage (for example: 105%), it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. +# 2 changes: This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width fields. It's useless when all other width fields have a value.Set this to a non-zero value to allow a manual extrusion width. If left to zero, Slic3r derives extrusion widths from the nozzle diameter (see the tooltips for perimeter extrusion width, infill extrusion width etc). If expressed as percentage (for example: 105%), it will be computed over nozzle diameter.\nYou can set either 'Spacing', or 'Width'; the other will be calculated, using the perimeter 'Overlap' percentages and default layer height. +# translation: Toto je VÝCHOZÍ šířka vysunutí. Používá se POUZE k NAHRAZENÍ polí o šířce 0. Je to k ničemu, když všechna ostatní pole šířky mají hodnotu. Nastavte tuto hodnotu na nenulovou hodnotu, abyste povolili šířku ručního vysunutí. Pokud je ponecháno na nule, Slic3r odvozuje šířky vytlačování z průměru trysky (viz popisky pro šířku vysunutí po perimetru, šířku vysunutí výplně atd.). Pokud je vyjádřena v procentech (například: 105 %), bude vypočítána přes průměr trysky.\nMůžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent 'překrytí' perimetru a výchozí výšky vrstvy. msgid "" -"When printing multiple objects or copies on after another, this will help " -"you to choose how it's ordered.\n" -"Object will sort them by the order of the right panel.\n" -"Lowest Y will sort them by their lowest Y point. Useful for printers with a " -"X-bar.\n" -"Lowest Z will sort them by their height, useful for delta printers." +"This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width " +"fields. It's useless when all other width fields have a value.\n" +"Set this to a non-zero value to allow a manual extrusion width. If left to " +"zero, Slic3r derives extrusion widths from the nozzle diameter (see the " +"tooltips for perimeter extrusion width, infill extrusion width etc). If " +"expressed as percentage (for example: 105%), it will be computed over nozzle " +"diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2430 +#: src/libslic3r/PrintConfig.cpp:2358 +#Similar to me: This is the maximum acceleration your printer will use for first layer.\nIf set to %, all accelerations will be reduced by that ratio.\nSet zero to disable acceleration control for first layer. +# 52 changes: This is the acceleration your printer will use for first layer.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for first layer. +# translation: Toto je zrychlení, které tiskárna použije pro první vrstvu.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu. +# 70 changes: This is the acceleration your printer will use for infill.\nCan be a % of the default acceleration\nSet zero to disable acceleration control for infill. +# translation: Toto je zrychlení, které tiskárna použije pro vyplnění.\nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci ovládání zrychlení pro výplň. +# 71 changes: This is the acceleration your printer will use for perimeters. \nCan be a % of the default acceleration\nSet zero to disable acceleration control for perimeters. +# translation: Toto je zrychlení, které tiskárna použije pro perimetry. \nMůže být % výchozího zrychlení\nNastavte nulu pro deaktivaci řízení zrychlení pro perimetry. msgid "" -"When printing with very low layer heights, you might still want to print a " -"thicker bottom layer to improve adhesion and tolerance for non perfect build " -"plates. This can be expressed as an absolute value or as a percentage (for " -"example: 75%) over the lowest nozzle diameter used in by the object." +"This is the maximum acceleration your printer will use for first layer.\n" +"If set to %, all accelerations will be reduced by that ratio.\n" +"Set zero to disable acceleration control for first layer." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4138 -#Similar to me: When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder).\nNote: This value will be unretracted when this extruder will load the next time. -# 82 changes: When retraction is triggered before changing tool, filament is pulled back by the specified amount (the length is measured on raw filament, before it enters the extruder). -# translation: Při výměně nástroje se spustí retrakce a filament se zatáhne zpět o zadané množství (délka se měří na surovém filamentu, než vstoupí do extruderu). +#: src/libslic3r/PrintConfig.cpp:1178 msgid "" -"When retraction is triggered before changing tool, filament is pulled back " -"by the specified amount (the length is measured on raw filament, before it " -"enters the extruder).\n" -"Note: This value will be unretracted when this extruder will load the next " -"time." +"This is the reference speed that other 'main' speed can reference to by a " +"%.\n" +"This setting doesn't do anything by itself, and so is deactivated unless a " +"speed depends on it (a % from the left column).\n" +"This can be expressed as a percentage (for example: 80%) over the machine " +"Max Feedrate for X axis.\n" +"Set zero to use autospeed for speed fields using a % of this setting." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1442 +#: src/libslic3r/PrintConfig.cpp:922 +#Similar to me: This separate setting will affect the speed of brim and skirt. \nIf expressed as percentage (for example: 80%) it will be calculated over the Support speed setting.\nSet zero to use autospeed for this feature. +# 74 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. +# translation: Toto oddělené nastavení ovlivní rychlost tisku vnějších perimetrů (těch viditelných). Pokud je hodnota vyjádřena procenty (například: 80%), bude rychlost vypočítána z hodnoty rychlosti tisku perimetrů, nastavené výše. Nastavte nulu pro automatický výpočet. +# 76 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set zero for auto. +# translation: Toto samostatné nastavení ovlivní rychlost vnějších perimetrů (viditelných). Pokud je vyjádřeno v procentech (například: 80%), bude vypočítáno podle výše uvedeného nastavení rychlosti perimetru. Nastavte nulu pro auto. +# 83 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. +# translation: Toto oddělené nastavení ovlivní rychlost perimetrů o poloměru <= 6,5 mm (obvykle díry). Pokud je vyjádřeno jako procentní podíl (například: 80%), vypočte se z výše uvedeného nastavení rychlosti perimetrů. Pro automatické nastavení zadejte nulu. msgid "" -"When set to a non-zero value this fan speed is used only for external " -"perimeters (visible ones). \n" -"Set to 1 to disable the fan.\n" -"Set to -1 to use the normal fan speed on external perimeters.External " -"perimeters can benefit from higher fan speed to improve surface finish, " -"while internal perimeters, infill, etc. benefit from lower fan speed to " -"improve layer adhesion." +"This separate setting will affect the speed of brim and skirt. \n" +"If expressed as percentage (for example: 80%) it will be calculated over the " +"Support speed setting.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/libslic3r/PrintConfig.cpp:3389 -#Similar to me: When setting other speed settings to 0, Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow.\nThis can be expressed as a percentage (for example: 100%) over the machine Max Feedrate for X axis. -# 102 changes: When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow. -# translation: Pokud jsou všechna ostatní nastavení rychlosti na hodnotě nula, Slic3r automaticky vypočítá optimální rychlost pro udržení konstantního tlaku v extruderu. Toto experimentální nastavení slouží k nastavení nejvyšší rychlosti tisku, kterou chcete povolit. +#: src/libslic3r/PrintConfig.cpp:1485 +#Similar to me: This separate setting will affect the speed of external perimeters (the visible ones). \nIf expressed as percentage (for example: 80%) it will be calculated over the Internal Perimeters speed setting.\nSet zero to use autospeed for this feature. +# 45 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. +# translation: Toto oddělené nastavení ovlivní rychlost tisku vnějších perimetrů (těch viditelných). Pokud je hodnota vyjádřena procenty (například: 80%), bude rychlost vypočítána z hodnoty rychlosti tisku perimetrů, nastavené výše. Nastavte nulu pro automatický výpočet. +# 47 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set zero for auto. +# translation: Toto samostatné nastavení ovlivní rychlost vnějších perimetrů (viditelných). Pokud je vyjádřeno v procentech (například: 80%), bude vypočítáno podle výše uvedeného nastavení rychlosti perimetru. Nastavte nulu pro auto. +# 79 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. +# translation: Toto oddělené nastavení ovlivní rychlost perimetrů o poloměru <= 6,5 mm (obvykle díry). Pokud je vyjádřeno jako procentní podíl (například: 80%), vypočte se z výše uvedeného nastavení rychlosti perimetrů. Pro automatické nastavení zadejte nulu. msgid "" -"When setting other speed settings to 0, Slic3r will autocalculate the " -"optimal speed in order to keep constant extruder pressure. This experimental " -"setting is used to set the highest print speed you want to allow.\n" -"This can be expressed as a percentage (for example: 100%) over the machine " -"Max Feedrate for X axis." +"This separate setting will affect the speed of external perimeters (the " +"visible ones). \n" +"If expressed as percentage (for example: 80%) it will be calculated over the " +"Internal Perimeters speed setting.\n" +"Set zero to use autospeed for this feature." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5656 +#: src/libslic3r/PrintConfig.cpp:4436 +#Similar to me: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes).\nIf expressed as percentage (for example: 80%) it will be calculated on the Internal Perimeters speed setting above.\nSet zero to disable. +# 12 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above.\nSet zero to disable. +# translation: Toto samostatné nastavení ovlivní rychlost perimetrů s poloměrem <= 6,5 mm (obvykle otvory). Pokud je vyjádřeno v procentech (například: 80%), bude vypočítáno podle výše uvedeného nastavení rychlosti perimetrů.\nNastavit nulu pro zakázání. +# 25 changes: This separate setting will affect the speed of perimeters having radius <= 6.5mm (usually holes). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set to zero for auto. +# translation: Toto oddělené nastavení ovlivní rychlost perimetrů o poloměru <= 6,5 mm (obvykle díry). Pokud je vyjádřeno jako procentní podíl (například: 80%), vypočte se z výše uvedeného nastavení rychlosti perimetrů. Pro automatické nastavení zadejte nulu. +# 56 changes: This separate setting will affect the speed of external perimeters (the visible ones). If expressed as percentage (for example: 80%) it will be calculated on the perimeters speed setting above. Set zero for auto. +# translation: Toto samostatné nastavení ovlivní rychlost vnějších perimetrů (viditelných). Pokud je vyjádřeno v procentech (například: 80%), bude vypočítáno podle výše uvedeného nastavení rychlosti perimetru. Nastavte nulu pro auto. msgid "" -"When the external perimeter loop extrusion ends, a wipe is done, going " -"slightly inside the print. The number in this settting increases the wipe by " -"moving the nozzle along the loop again before the final wipe." +"This separate setting will affect the speed of perimeters having radius <= " +"6.5mm (usually holes).\n" +"If expressed as percentage (for example: 80%) it will be calculated on the " +"Internal Perimeters speed setting above.\n" +"Set zero to disable." msgstr "" -#: src/libslic3r/PrintConfig.cpp:4224 -#Similar to me: When the retraction is compensated after changing tool, the extruder will push this additional amount of filament (but not on the first extruder after start, as it should already be loaded). -# 68 changes: When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed. -# translation: Když je retrakce kompenzována po rychloposunu, extruder vytlačuje toto další množství filamentu. Toto nastavení je zřídkakdy potřeba. -# 76 changes: When the retraction is compensated after changing tool, the extruder will push this additional amount of filament. -# translation: Když je retrakce kompenzována po změně nástroje, extruder vytlačuje toto další množství filamentu. +#: src/libslic3r/PrintConfig.cpp:723 msgid "" -"When the retraction is compensated after changing tool, the extruder will " -"push this additional amount of filament (but not on the first extruder after " -"start, as it should already be loaded)." +"This setting allow you to choose the base for the bridge flow compute, the " +"result will be multiplied by the bridge flow to have the final result.\n" +"A bridge is an extrusion with nothing under it to flatten it, and so it " +"can't have a 'rectangle' shape but a circle one.\n" +" * The default way to compute a bridge flow is to use the nozzle diameter as " +"the diameter of the extrusion cross-section. It shouldn't be higher than " +"that to prevent sagging.\n" +" * A second way to compute a bridge flow is to use the current layer height, " +"so it shouldn't protrude below it. Note that may create too thin extrusions " +"and so a bad bridge quality.\n" +" * A Third way to compute a bridge flow is to continue to use the current " +"flow/section (mm3 per mm). If there is no current flow, it will use the " +"solid infill one. To use if you have some difficulties with the big flow " +"changes from perimeter and infill flow to bridge flow and vice-versa, the " +"bridge flow ratio let you compensate for the change in speed. \n" +"The preview will display the expected shape of the bridge extrusion " +"(cylinder), don't expect a magical thick and solid air to flatten the " +"extrusion magically." msgstr "" -#: src/libslic3r/PrintConfig.cpp:1035 +#: src/libslic3r/PrintConfig.cpp:3430 +#, possible-c-format, possible-boost-format msgid "" -"When using 'Complete individual objects', the default behavior is to draw " -"the brim at the beginning of each object. if you prefer to have more place " -"for you objects, you can print all the brims at the beginning, so ther is " -"less problem with collision." +"This setting allow you to set the desired flow rate for the autospeed " +"algorithm. It tries to keep a constant feedrate for the entire object.\n" +"The autospeed is only enable on speed field that have a value of 0. If a " +"speed field is a % of a 0 field, then it will be a % of the value it should " +"have got from the autospeed.\n" +"If this field is set to 0, then there is no autospeed. If a speed value i " +"still set to 0, it will get the max speed" msgstr "" -#: src/libslic3r/PrintConfig.cpp:1027 +#: src/libslic3r/PrintConfig.cpp:5268 msgid "" -"When using 'Complete individual objects', the default behavior is to draw " -"the skirt around each object. if you prefer to have only one skirt for the " -"whole platter, use this option." +"This setting allows you to modify the time estimation by a flat amount for " +"each toolchange." msgstr "" -#: src/slic3r/GUI/Preferences.cpp:362 +#: src/libslic3r/PrintConfig.cpp:5259 msgid "" -"When you create a new project, it will keep the current preset state, and " -"won't open the preset change dialog." +"This setting allows you to modify the time estimation by a flat amount to " +"compensate for start script, the homing routine, and other things." msgstr "" -#: src/slic3r/GUI/Tab.cpp:4917 -#Similar to me: WHITE BULLET icon indicates that the values this widget control are all the same as in the last saved preset. -# 26 changes: WHITE BULLET icon indicates that the value is the same as in the last saved preset. -# translation: Ikona BÍLÉ TEČKY indikuje, že je hodnota shodná s naposledy uloženým přednastavením. +#: src/libslic3r/PrintConfig.cpp:4485 +#, possible-c-format, possible-boost-format msgid "" -"WHITE BULLET icon indicates that the values this widget control are all the " -"same as in the last saved preset." +"This setting allows you to reduce the overlap between the lines of the solid " +"fill, to reduce the % filled if you see overextrusion signs on solid areas. " +"Note that you should be sure that your flow (filament extrusion multiplier) " +"is well calibrated and your filament max overlap is set before thinking to " +"modify this." msgstr "" -#: ../../ui_layout/default/print.ui : l336 -#Similar to me: width -# 1 changes: Width -# translation: Šířka -# 2 changes: fifth -# translation: pátého -# 2 changes: ninth -# translation: devátého -msgid "width" -msgstr "" -#: ../../ui_layout/default/print.ui -msgid "Width & Flow" +#: src/libslic3r/PrintConfig.cpp:1459 +#, possible-c-format +#Similar to me: This setting allows you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters' artifacts. 100% means that no gap is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one. +# 106 changes: This setting allows you to reduce the overlap between the perimeters and the external one, to reduce the impact of the perimeters' artifacts. 100% means that no gap is left, and 0% means that the external perimeter isn't contributing to the overlap with the 'inner' one.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it. +# translation: Toto nastavení vám umožňuje snížit překrytí mezi perimetry a vnějším perimetrem, abyste snížili dopad artefaktů perimetru. 100 % znamená, že nezůstane žádná mezera, a 0 % znamená, že vnější perimetr nepřispívá k překrývají s 'vnitřním'.\nJe to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být odstraněno, pokud pro to není k ničemu. +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"external one, to reduce the impact of the perimeters' artifacts. 100% means " +"that no gap is left, and 0% means that the external perimeter isn't " +"contributing to the overlap with the 'inner' one." msgstr "" -#: src/libslic3r/PrintConfig.cpp:5596 -#, possible-c-format, possible-boost-format +#: src/libslic3r/PrintConfig.cpp:2613 +#, possible-c-format +#Similar to me: This setting allows you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps are left, and 0% means that the gap fill won't touch the perimeters.\nMay be useful if you can see the gapfill on the exterrnal surface, to reduce that artifact. +# 79 changes: This setting allows you to reduce the overlap between the perimeters and the gap fill. 100% means that no gaps are left, and 0% means that the gap fill won't touch the perimeters.\nIt's very experimental, please report about the usefulness. It may be removed if there is no use for it. +# translation: Toto nastavení umožňuje snížit překrytí mezi perimetry a výplní mezery. 100 % znamená, že nezůstanou žádné mezery, a 0 % znamená, že výplň mezery se nebude dotýkat perimetrů.\nJe to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být odstraněno, pokud pro to není k ničemu. msgid "" -"Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) " -"only one nozzle diameter." -msgstr "" - -#: ../../ui_layout/default/print.ui : l349 -msgid "width&spacing combo" +"This setting allows you to reduce the overlap between the perimeters and the " +"gap fill. 100% means that no gaps are left, and 0% means that the gap fill " +"won't touch the perimeters.\n" +"May be useful if you can see the gapfill on the exterrnal surface, to reduce " +"that artifact." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:81 -msgid "will be turned off by default." +#: src/libslic3r/PrintConfig.cpp:5241 +msgid "" +"This setting allows you to set how much an hour of printing time is costing " +"you in printer maintenance, loan, human albor, etc." msgstr "" -#: src/libslic3r/PrintConfig.cpp:3173 -msgid "Will only take into account the delay for the cooling of overhangs." +#: src/slic3r/GUI/Preferences.cpp:825 +msgid "This template will be used for drawing button text on hover." msgstr "" -#: src/slic3r/GUI/PresetHints.cpp:49 -#, possible-boost-format -msgid "will run at %1%%% by default" +#: src/libslic3r/PrintConfig.cpp:8462 +#Similar to me: This version of Slic3r may not understand configurations produced by the newest Slic3r versions. For example, newer Slic3r may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. +# 4 changes: This version of Slic3r may not understand configurations produced by newest Slic3r versions. For example, newer Slic3r may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. +# translation: Tato verze Slic3r nemusí rozumět konfiguracím vytvořeným nejnovějšími verzemi Slic3r. Například novější Slic3r může rozšířit seznam podporovaných variant firmwaru. Člověk se může rozhodnout vykoupit nebo nahradit neznámou hodnotu výchozím potichu nebo podrobně. +# 18 changes: This version of PrusaSlicer may not understand configurations produced by the newest PrusaSlicer versions. For example, newer PrusaSlicer may extend the list of supported firmware flavors. One may decide to bail out or to substitute an unknown value with a default silently or verbosely. +# translation: Tato verze PrusaSliceru nemusí být kompatibilní s konfiguracemi vytvořenými nejnovějšími verzemi PrusaSliceru. Novější verze PrusaSliceru mohou například rozšířit seznam podporovaných druhů firmwaru. Lze se rozhodnout, že to budeme ignorovat, nebo že neznámou hodnotu nahradíme výchozí hodnotou. +msgid "" +"This version of Slic3r may not understand configurations produced by the " +"newest Slic3r versions. For example, newer Slic3r may extend the list of " +"supported firmware flavors. One may decide to bail out or to substitute an " +"unknown value with a default silently or verbosely." msgstr "" -#: ../../ui_layout/default/extruder.ui -msgid "Wipe inside" + +#: src/libslic3r/PrintConfig.cpp:5239 +msgid "Time cost" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5471 src/libslic3r/PrintConfig.cpp:5480 -msgid "Wipe inside at start" +#: src/libslic3r/PrintConfig.cpp:5257 +msgid "Time for start custom gcode" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5502 -#Similar to me: Wipe only when crossing perimeters -# 11 changes: Only retract when crossing perimeters -# translation: Provést retrakci pouze při přejíždění perimetrů -# 13 changes: Avoid crossing perimeters -# translation: Vyhnout se přejíždění perimetrů -msgid "Wipe only when crossing perimeters" +#: src/libslic3r/PrintConfig.cpp:5266 +msgid "Time for toolchange" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5510 -#Similar to me: Wipe speed -# 4 changes: Fan speed -# translation: Rychlost ventilátoru -# 4 changes: Print speed -# translation: Rychlost tisku -# 4 changes: Wipe Tower -# translation: Čistící Věž -msgid "Wipe speed" +#: src/libslic3r/PrintConfig.cpp:1273 +#Similar to me: Top fill Pattern +# 1 changes: Top fill pattern +# translation: Vzor výplně horní vrstvy +# 5 changes: Top Pattern +# translation: Horní vzor +# 6 changes: Bottom fill pattern +# translation: Vzor spodní výplně +msgid "Top fill Pattern" msgstr "" -#: ../../ui_layout/default/print.ui -#Similar to me: Wipe tower position -# 7 changes: The top position. -# translation: Horní pozice. -msgid "Wipe tower position" +#: ../../ui_layout/default/print.ui : l23 +#Similar to me: Top infill pattern +# 2 changes: Top fill pattern +# translation: Vzor výplně horní vrstvy +# 6 changes: Bottom fill pattern +# translation: Vzor spodní výplně +# 7 changes: Fill pattern +# translation: Vzor výplně +msgid "Top infill pattern" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5622 -#Similar to me: Wipe tower Width -# 6 changes: Wipe tower -# translation: Čistící věž -# 6 changes: Wipe tower brim width -# translation: Šířka límce čistící věže -msgid "Wipe tower Width" +#: src/libslic3r/PrintConfig.cpp:5345 +#Similar to me: Top solid acceleration +# 7 changes: Travel acceleration +# translation: Cestovní zrychlení +# 8 changes: Default acceleration +# translation: Výchozí zrychlení +# 8 changes: Infill acceleration +# translation: Zrychlení výplně +msgid "Top solid acceleration" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5606 -#Similar to me: Wipe tower X -# 2 changes: Wipe tower -# translation: Čistící věž -# 3 changes: Wipe Tower -# translation: Čistící Věž -# 3 changes: wipe tower -# translation: čistící věž -msgid "Wipe tower X" +#: src/libslic3r/PrintConfig.cpp:6196 +msgid "Tough" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5614 -#Similar to me: Wipe tower Y -# 2 changes: Wipe tower -# translation: Čistící věž -# 3 changes: Wipe Tower -# translation: Čistící Věž -# 3 changes: wipe tower -# translation: čistící věž -msgid "Wipe tower Y" +#: src/slic3r/GUI/Tab.cpp:4916 +#Similar to me: UNLOCKED LOCK icon indicates that the values this widget control were changed and at least one is not equal to the system (or default) value.\nClick to reset current all values to the system (or default) values. +# 43 changes: UNLOCKED LOCK icon indicates that the value was changed and is not equal to the system (or default) value.\nClick to reset current value to the system (or default) value. +# translation: Ikona ODEMKNUTÉHO ZÁMKU indikuje, že se hodnota změnila a není shodná se systémovou (nebo výchozí) hodnotou.\nKlikněte pro reset současné hodnoty na systémovou hodnotu. +msgid "" +"UNLOCKED LOCK icon indicates that the values this widget control were " +"changed and at least one is not equal to the system (or default) value.\n" +"Click to reset current all values to the system (or default) values." msgstr "" -#: ../../ui_layout/default/printer_sla.ui : l9 -msgid "X" + +#: src/libslic3r/PrintConfig.cpp:5412 +msgid "Use target acceleration for travel deceleration" msgstr "" -#: ../../ui_layout/default/print.ui : l285 -msgid "xy" +#: ../../ui_layout/default/print.ui : l4 +#Similar to me: Wall Thickness +# 1 changes: Wall thickness +# translation: Tloušťka stěny +msgid "Wall Thickness" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5695 -#Similar to me: XY compensation -# 6 changes: XY Size Compensation -# translation: Kompenzace XY rozměrů -msgid "XY compensation" +#: src/slic3r/GUI/FreeCADDialog.cpp:255 +#Similar to me: What to do with the result? insert it into the existing platter or replacing the current platter by a new one? +# 2 changes: What to do with the result? insert it into the existing plater or replacing the current plater by a new one? +# translation: Co dělat s výsledkem? vložit jej do stávajícího talíře nebo vyměnit stávající talíř za nový? +msgid "" +"What to do with the result? insert it into the existing platter or replacing " +"the current platter by a new one?" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2304 -#Similar to me: XY First layer compensation -# 9 changes: First layer expansion -# translation: Rozšíření první vrstvy -# 10 changes: XY Size Compensation -# translation: Kompenzace XY rozměrů -msgid "XY First layer compensation" +#: src/libslic3r/PrintConfig.cpp:3402 +#Similar to me: When setting other speed settings to 0, Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow.\nThis can be expressed as a percentage (for example: 100%) over the machine Max Feedrate for X axis. +# 101 changes: When setting other speed settings to 0, Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow. +# translation: Při nastavení dalších nastavení rychlosti na 0 Slic3r automaticky vypočítá optimální rychlost, aby byl zachován konstantní tlak extrudéru. Toto experimentální nastavení se používá k nastavení nejvyšší rychlosti tisku, kterou chcete povolit. +# 102 changes: When setting other speed settings to 0 Slic3r will autocalculate the optimal speed in order to keep constant extruder pressure. This experimental setting is used to set the highest print speed you want to allow. +# translation: Pokud jsou všechna ostatní nastavení rychlosti na hodnotě nula, Slic3r automaticky vypočítá optimální rychlost pro udržení konstantního tlaku v extruderu. Toto experimentální nastavení slouží k nastavení nejvyšší rychlosti tisku, kterou chcete povolit. +msgid "" +"When setting other speed settings to 0, Slic3r will autocalculate the " +"optimal speed in order to keep constant extruder pressure. This experimental " +"setting is used to set the highest print speed you want to allow.\n" +"This can be expressed as a percentage (for example: 100%) over the machine " +"Max Feedrate for X axis." msgstr "" -#: src/libslic3r/PrintConfig.cpp:2314 -msgid "XY First layer compensation height in layers" +#: src/slic3r/GUI/Preferences.cpp:376 +msgid "" +"When you click on the garbage can (or ctrl+del), ask for the action to do. " +"If disable, it will erase all object without asking" msgstr "" -#: src/libslic3r/PrintConfig.cpp:5696 -#Similar to me: XY holes compensation -# 5 changes: XY Size Compensation -# translation: Kompenzace XY rozměrů -msgid "XY holes compensation" +#: src/slic3r/GUI/Tab.cpp:4919 +#Similar to me: WHITE BULLET icon indicates that the values this widget control are all the same as in the last saved preset. +# 26 changes: WHITE BULLET icon indicates that the value is the same as in the last saved preset. +# translation: Ikona BÍLÉ TEČKY indikuje, že je hodnota shodná s naposledy uloženým přednastavením. +msgid "" +"WHITE BULLET icon indicates that the values this widget control are all the " +"same as in the last saved preset." msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5708 -msgid "XY holes threshold" +#: ../../ui_layout/default/extruder.ui +msgid "Wipe inside" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2690 -msgid "xyz decimals" +#: src/libslic3r/PrintConfig.cpp:5487 src/libslic3r/PrintConfig.cpp:5496 +msgid "Wipe inside at start" +msgstr "" + +#: ../../ui_layout/default/printer_sla.ui : l9 +msgid "X" msgstr "" #: ../../ui_layout/default/printer_sla.ui : l10 @@ -8787,7 +2377,7 @@ msgid "Y" msgstr "" -#: src/slic3r/GUI/GUI_App.cpp:1080 +#: src/slic3r/GUI/GUI_App.cpp:1082 #, possible-c-format, possible-boost-format #Similar to me: You are running a 32 bit build of %s on 64-bit Windows.\n32 bit build of %s will likely not be able to utilize all the RAM available in the system.\nPlease download and install a 64 bit build of %s.\nDo you wish to continue? # 71 changes: You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n32 bit build of PrusaSlicer will likely not be able to utilize all the RAM available in the system.\nPlease download and install a 64 bit build of PrusaSlicer from https://www.prusa3d.cz/prusaslicer/.\nDo you wish to continue? @@ -8801,57 +2391,10 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:3597 src/libslic3r/PrintConfig.cpp:3945 -msgid "" -"You can add data accessible to custom-gcode macros.\n" -"Each line can define one variable.\n" -"The format is 'variable_name=value'. the variable name should only have [a-" -"zA-Z0-9] characters or '_'.\n" -"A value that can be parsed as a int or float will be avaible as a numeric " -"value.\n" -"A value that is enclosed by double-quotes will be available as a string " -"(without the quotes)\n" -"A value that only takes values as 'true' or 'false' will be a boolean)\n" -"Every other value will be parsed as a string as-is.\n" -"Advice: before using a variable, it's safer to use the function " -"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " -"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " -"'string'." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:1771 -msgid "" -"You can add data accessible to custom-gcode macros.\n" -"Each line can define one variable.\n" -"The format is 'variable_name=value'. The variable name should only have [a-" -"zA-Z0-9] characters or '_'.\n" -"A value that can be parsed as a int or float will be avaible as a numeric " -"value.\n" -"A value that is enclosed by double-quotes will be available as a string " -"(without the quotes)\n" -"A value that only takes values as 'true' or 'false' will be a boolean)\n" -"Every other value will be parsed as a string as-is.\n" -"These variables will be available as an array in the custom gcode (one item " -"per extruder), don't forget to use them with the {current_extruder} index to " -"get the current value. If a filament has a typo on the variable that change " -"its type, then the parser will convert evrything to strings.\n" -"Advice: before using a variable, it's safer to use the function " -"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " -"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " -"'string'." -msgstr "" - - -#: src/slic3r/GUI/CalibrationCubeDialog.cpp:30 -msgid "" -"You can choose the dimension of the cube. It's a simple scale, you can " -"modify it in the right panel yourself if you prefer. It's just quicker to " -"select it here." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:2295 +#: src/libslic3r/PrintConfig.cpp:2296 +#Similar to me: You can increase this to over-extrude on the first layer if there is not enough plastic because your bed isn't levelled.\nNote: DON'T USE THIS if your only problem is bed leveling, LEVEL YOUR BED! Use this setting only as last resort after all calibrations failed. +# 1 changes: You can increase this to over-extrude on the first layer if there is not enough plastic because your bed isn't levelled.\nNote: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED! Use this setting only as last resort after all calibrations failed. +# translation: Pokud není dostatek plastu, protože vaše postel není vyrovnána, můžete to zvýšit tak, aby došlo k nadměrnému vytlačení první vrstvy.\nPoznámka: NEPOUŽÍVEJTE TOTO, pokud je vaším jediným problémem vyrovnání postele, VYROVNĚTE POSTEL! Toto nastavení používejte pouze jako poslední možnost poté, co všechny kalibrace selhaly. msgid "" "You can increase this to over-extrude on the first layer if there is not " "enough plastic because your bed isn't levelled.\n" @@ -8860,26 +2403,7 @@ msgid "" msgstr "" -#: src/libslic3r/PrintConfig.cpp:2285 -msgid "" -"You can increase this to over-extrude on the top layer if there is not " -"enough plastic to make a good fill." -msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:3653 -#Similar to me: You can use all configuration options as variables inside this template. For example: {layer_height}, {fill_density} etc. You can also use {timestamp}, {year}, {month}, {day}, {hour}, {minute}, {second}, {version}, {input_filename}, {input_filename_base}. -# 24 changes: You can use all configuration options as variables inside this template. For example: [layer_height], [fill_density] etc. You can also use [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base]. -# translation: V této šabloně můžete použít všechny možnosti konfigurace jako proměnné. Můžete například použít: [layer_height], [fill_density] etc. Také můžete použít [timestamp], [year], [month], [day], [hour], [minute], [second], [version], [input_filename], [input_filename_base]. -msgid "" -"You can use all configuration options as variables inside this template. For " -"example: {layer_height}, {fill_density} etc. You can also use {timestamp}, " -"{year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " -"{input_filename}, {input_filename_base}." -msgstr "" - - -#: src/slic3r/GUI/Plater.cpp:1721 +#: src/slic3r/GUI/Plater.cpp:1757 #, possible-boost-format #Similar to me: You will not be asked about it again, when: \n- Closing %1%,\n- Loading or creating a new project # 11 changes: You will not be asked about it again, when: \n- Closing PrusaSlicer,\n- Loading or creating a new project @@ -8905,48 +2429,19 @@ msgid "" "- Loading a new project while some presets are modified" msgstr "" -#: ../../ui_layout/default/print.ui : l286 -msgid "z" -msgstr "" - -#: ../../ui_layout/default/printer_sla.ui : l28 -msgid "Z" -msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5760 -msgid "Z full step" +#: src/slic3r/GUI/Plater.cpp:1115 +msgid "Your current tags:" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5414 -#Similar to me: Z Travel -# 1 changes: Z travel -# translation: Posun v ose Z -# 2 changes: Travel -# translation: Rychloposun -msgid "Z Travel" +#: ../../ui_layout/default/print.ui : l288 +msgid "z" msgstr "" - -#: src/libslic3r/PrintConfig.cpp:5415 -msgid "Z travel speed" +#: ../../ui_layout/default/printer_sla.ui : l28 +msgid "Z" msgstr "" #: ../../ui_layout/default/printer_fff.ui msgid "z utilities" msgstr "" - - -#: src/libslic3r/PrintConfig.cpp:5111 -msgid "Z-lift override" -msgstr "" - -#: ../../ui_layout/default/print.ui -#Similar to me: Z-offset -# 1 changes: Z offset -# translation: Odsazení Z -# 3 changes: Offset -# translation: Odsazení -msgid "Z-offset" -msgstr "" diff --git a/resources/localization/cs/cs_database.po b/resources/localization/cs/cs_database.po index 626c11bd2..602cc5b01 100644 --- a/resources/localization/cs/cs_database.po +++ b/resources/localization/cs/cs_database.po @@ -1,104 +1,36 @@ -msgid "%1$d backward edge" -msgid_plural "%1$d backward edges" -msgstr[0] "‪%1$d‬ zpětná hrana" -msgstr[1] "‪%1$d‬ zpětných hran" -msgstr[2] "‪%1$d‬ zpětných hran" -msgstr[3] "‪%1$d‬ zpětných hran" - -msgid "%1$d degenerate facet" -msgid_plural "%1$d degenerate facets" -msgstr[0] "%1$d degenerovaná faseta" -msgstr[1] "%1$d degenerované fasety" -msgstr[2] "%1$d degenerované fasety" -msgstr[3] "%1$d degenerovaných faset" - -msgid "%1$d edge fixed" -msgid_plural "%1$d edges fixed" -msgstr[0] "Opraveno ‪%1$d‬ hrana" -msgstr[1] "Opraveno ‪%1$d‬ hran" -msgstr[2] "Opraveno ‪%1$d‬ hran" -msgstr[3] "Opraveno ‪%1$d‬ hran" - -msgid "%1$d facet removed" -msgid_plural "%1$d facets removed" -msgstr[0] "%1$d odstraněna faseta" -msgstr[1] "%1$d odstraněné fasety" -msgstr[2] "%1$d odstraněné fasety" -msgstr[3] "%1$d odstraněných fasetů" - -msgid "%1$d facet reversed" -msgid_plural "%1$d facets reversed" -msgstr[0] "%1$d otočená faseta" -msgstr[1] "%1$d otočené fasety" -msgstr[2] "%1$d otočené fasety" -msgstr[3] "%1$d otočenách faset" - -msgid "%1$d object was loaded with custom seam." -msgid_plural "%1$d objects were loaded with custom seam." -msgstr[0] "%1$d objekt byl načten s vlastním švem." -msgstr[1] "%1$d objekty byly načteny s vlastním švem." -msgstr[2] "%1$d objektů bylo načteno s vlastním švem." -msgstr[3] "%1$d objektů bylo načteno s vlastním švem." - -msgid "%1$d object was loaded with custom supports." -msgid_plural "%1$d objects were loaded with custom supports." -msgstr[0] "%1$d objekt byl načten s vlastními podpěrami." -msgstr[1] "%1$d objekty byly načteny s vlastními podpěrami." -msgstr[2] "%1$d objektů bylo načteno s vlastními podpěrami." -msgstr[3] "%1$d objektů bylo načteno s vlastními podpěrami." - -msgid "%1$d object was loaded with multimaterial painting." -msgid_plural "%1$d objects were loaded with multimaterial painting." -msgstr[0] "%1$d objekt byl načten s multimateriálovým malováním." -msgstr[1] "%1$d objekty byly načteny s multimateriálovým malováním." -msgstr[2] "%1$d objektů bylo načteno s multimateriálovým malováním." -msgstr[3] "%1$d objektů bylo načteno s multimateriálovým malováním." - -msgid "%1$d object was loaded with partial sinking." -msgid_plural "%1$d objects were loaded with partial sinking." -msgstr[0] "%1$d objekt byl načten s částečným potopením pod podložku." -msgstr[1] "%1$d objekty byly načteny s částečným potopením pod podložku." -msgstr[2] "%1$d objektů bylo načteno s částečným potopením pod podložku." -msgstr[3] "%1$d objektů bylo načteno s částečným potopením pod podložku." - -msgid "%1$d object was loaded with variable layer height." -msgid_plural "%1$d objects were loaded with variable layer height." -msgstr[0] "%1$d objekt byl načten s proměnnou výškou vrstvy." -msgstr[1] "%1$d objekty byly načteny s proměnnou výškou vrstvy." -msgstr[2] "%1$d objektů bylo načteno s proměnnou výškou vrstvy." -msgstr[3] "%1$d objektů bylo načteno s proměnnou výškou vrstvy." - -msgid "%1$d open edge" -msgid_plural "%1$d open edges" -msgstr[0] "%1$d otevřená hrana" -msgstr[1] "%1$d otevřené hrany" -msgstr[2] "%1$d otevřených hran" -msgstr[3] "%1$d otevřených hran" +msgid "!! Can be unstable in some os distribution !!" +msgstr "!! V některých distribucích OS může být nestabilní !!" -msgid "%1% (%2$d shell)" -msgid_plural "%1% (%2$d shells)" -msgstr[0] "%1% (%2$d stěna)" -msgstr[1] "%1% (%2$d stěny)" -msgstr[2] "%1% (%2$d stěny)" -msgstr[3] "%1% (%2$d stěn)" +msgid "%1% Preset" +msgstr "%1% Přednastavení" msgid "" -"%1% marked with * are not compatible with some installed " -"printers." +"%1% printer was active at the time the target Undo / Redo snapshot was " +"taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" -"%1% označené * nejsou kompatibilní s některými nainstalovanými " -"tiskárnami." - -msgid "%1% Preset" -msgstr "%1% Přednastavení" +"%1% tiskárna byla aktivní v době, kdy byly pořízeny kroky Zpět / Vpřed. Přepnutí na " +"tiskárnu %1% vyžaduje opětovné načtení předvoleb %1%." msgid "%1% was substituted with %2%" -msgstr "%2% bylo nahrazeno hodnotou %1%" +msgstr "%1% bylo nahrazeno hodnotou %2%" msgid "%1% was successfully sliced." msgstr "%1% byl úspěšně naslicován." +msgid "%d (%d shells)" +msgstr "%d (%d obalů)" + +msgid "" +"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " +"facets reversed, %d backwards edges" +msgstr "" +"%d poškozených faset, %d okrajů opraveno, %d faset odstraněno, %d faset přidáno, %d " +"faset navráceno, %d zadních okrajů" + +msgid "%d perimeter: %.2f mm" +msgstr "%d perimetr: %.2f mm" + msgid "%d presets successfully imported." msgstr "%d přednastavení úspěšně importováno." @@ -120,21 +52,34 @@ msgstr "%s chyba" msgid "%s Family" msgstr "%s Rodina" -msgid "%s has a warning" -msgstr "%s obsahuje varování" +msgid "%s flow rate is maximized " +msgstr "%s průtok je maximalizován " + +msgid "%s GUI initialization failed" +msgstr "%s inicializace GUI selhala" + +msgid "" +"%s has encountered a localization error. Please report to %s team, what " +"language was active and in which scenario this issue happened. Thank you.\n" +"\n" +"The application will now terminate." +msgstr "" +"%s narazil na chybu lokalizace. Nahlaste prosím týmu %s co jazyk byl aktivní a ve " +"kterém scénáři k tomuto problému došlo. Děkuji.\n" +"\n" +"Aplikace bude nyní ukončena." msgid "%s has encountered an error" -msgstr "Došlo k chybě v programu %s" +msgstr "%s Došlo k chybě v programu" msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" -"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. " -"Pokud jste si jisti, že máte v systému dostatek paměti RAM, může to být také " -"chyba programu a v takovém případě bychom byli rádi, kdybyste nám to " -"nahlásili." +"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. Pokud jste " +"si jisti, že máte v systému dostatek paměti RAM, může to být také chyba programu a " +"v takovém případě bychom byli rádi, kdybyste nám to nahlásili." msgid "" "%s has encountered an error. It was likely caused by running out of memory. " @@ -143,10 +88,9 @@ msgid "" "\n" "The application will now terminate." msgstr "" -"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. " -"Pokud jste si jisti, že máte v systému dostatek paměti RAM, může to být také " -"chyba programu a v takovém případě bychom byli rádi, kdybyste nám to " -"nahlásili.\n" +"%s zaznamenal chybu. Bylo to pravděpodobně způsobeno nedostatkem paměti. Pokud jste " +"si jisti, že máte v systému dostatek paměti RAM, může to být také chyba programu a " +"v takovém případě bychom byli rádi, kdybyste nám to nahlásili.\n" "\n" "Aplikace se nyní ukončí." @@ -154,14 +98,23 @@ msgid "%s has no configuration updates available." msgstr "%s nemá k dispozici žádné aktualizace konfigurace." msgid "%s incompatibility" -msgstr "Není kompatibilní s %s" - -msgid "%s info" -msgstr "%s info" +msgstr "%s Není kompatibilní s" msgid "%s information" msgstr "%s informace" +msgid "%s is closing: Unsaved Changes" +msgstr "%s se zavírá: Neuložené změny" + +msgid "" +"%s is not using the newest configuration available.\n" +"Configuration Wizard may not offer the latest printers, filaments and SLA " +"materials to be installed. " +msgstr "" +"%s nepoužívá nejnovější dostupnou konfiguraci.\n" +"Průvodce konfigurací nemusí nabízet nejnovější tiskárny, vlákna a SLA materiály k " +"instalaci. " + msgid "" "%s now uses an updated configuration structure.\n" "\n" @@ -177,22 +130,37 @@ msgid "" msgstr "" "%s nyní používá aktualizovanou konfigurační strukturu.\n" "\n" -"Byly uvedeny takzvaná \"Systémová přednastavení\", která obsahují výchozí " -"nastavení pro rozličné tiskárny. Tato systémová přednastavení nemohou být " -"upravena, místo toho si nyní uživatel může vytvořit svá vlastní " -"přednastavení tím, že zdědí nastavení z jednoho ze systémových " -"přednastavení.\n" -"Nově vytvořené přednastavení může buď zdědit určitou hodnotu od svého " -"předchůdce nebo ji přepsat upravenou hodnotou.\n" +"Byly uvedeny takzvaná \"Systémová přednastavení\", která obsahují výchozí nastavení " +"pro rozličné tiskárny. Tato systémová přednastavení nemohou být upravena, místo " +"toho si nyní uživatel může vytvořit svá vlastní přednastavení tím, že zdědí " +"nastavení z jednoho ze systémových přednastavení.\n" +"Nově vytvořené přednastavení může buď zdědit určitou hodnotu od svého předchůdce " +"nebo ji přepsat upravenou hodnotou.\n" "\n" -"Při nastavování nových předvoleb postupujte podle pokynů v %s a vyberte, zda " -"chcete povolit automatické přednastavené aktualizace." +"Při nastavování nových předvoleb postupujte podle pokynů v %s a vyberte, zda chcete " +"povolit automatické přednastavené aktualizace." + +msgid "%s Releases" +msgstr "%s Vydání" + +msgid "" +"%s requires OpenGL 2.0 capable graphics driver to run correctly, \n" +"while OpenGL version %s, render %s, vendor %s was detected." +msgstr "" +"%s vyžaduje ke správnému fungování grafický ovladač podporující OpenGL 2.0, \n" +"zatímco verze OpenGL %s, render %s, byl zjištěn dodavatel." + +msgid "%s version" +msgstr "%s verze" msgid "%s View Mode" msgstr "%s Režim zobrazení" -msgid "%s warning" -msgstr "%s varování" +msgid "%s website" +msgstr "%s webová stránka" + +msgid "%s wiki" +msgstr "%s wiki" msgid "" "%s will now start updates. Otherwise it won't be able to start.\n" @@ -204,11 +172,33 @@ msgid "" msgstr "" "%s nyní spustí aktualizaci. Jinak nebude moci být spuštěn.\n" "\n" -"Nejprve bude vytvořen kompletní snímek konfigurace a v případě problému s " -"novou verzí lze provést obnovu.\n" +"Nejprve bude vytvořen kompletní snímek konfigurace a v případě problému s novou " +"verzí lze provést obnovu.\n" "\n" "Aktualizované balíčky konfigurace:" +msgid "%s will remember your action." +msgstr "%s si zapamatuje vaši akci." + +msgid "%s will remember your choice." +msgstr "%s si zapamatuje vaši volbu." + +msgid "" +"%s's user interfaces comes in three variants:\n" +"Simple, Advanced, and Expert.\n" +"The Simple mode shows only the most frequently used settings relevant for " +"regular 3D printing. The other two offer progressively more sophisticated " +"fine-tuning, they are suitable for advanced and expert users, respectively." +msgstr "" +"Uživatelská rozhraní %s jsou k dispozici ve třech variantách:\n" +"Jednoduché, pokročilé a expertní.\n" +"Jednoduchý režim zobrazuje pouze nejčastěji používaná nastavení relevantní pro " +"běžný 3D tisk. Další dva nabízejí postupně sofistikovanějšíjemné ladění, jsou " +"vhodné pro pokročilé a zkušené uživatele." + +msgid "%s: Don't ask me again" +msgstr "%s: Už se mě neptat" + msgid "" "%s\n" "Do you want to continue?" @@ -217,22 +207,22 @@ msgstr "" "Chcete pokračovat?" msgid "&About %s" -msgstr "&O %su" +msgstr "&O %s" -msgid "&Collapse Sidebar" -msgstr "&Sbalit Postranní panel" +msgid "&Collapse sidebar" +msgstr "&Sbalit postranní panel" msgid "&Configuration" msgstr "&Konfigurace" msgid "&Configuration Snapshots" -msgstr "Zálohy konfigura&ce" +msgstr "&Zálohy konfigurace" msgid "&Copy" msgstr "&Kopírovat" -msgid "&Delete Selected" -msgstr "Sma&zat vybrané" +msgid "&Delete selected" +msgstr "&Smazat vybrané" msgid "&Edit" msgstr "&Editovat" @@ -241,7 +231,7 @@ msgid "&Export" msgstr "&Exportovat" msgid "&Filament Settings Tab" -msgstr "Panel Nastavení &filamentu" +msgstr "&Panel Nastavení Filamentu" msgid "&File" msgstr "&Soubor" @@ -249,11 +239,11 @@ msgstr "&Soubor" msgid "&Finish" msgstr "&Dokončit" -msgid "&Fullscreen" -msgstr "&Fullscreen" +msgid "&G-code preview" +msgstr "&G-Code Prohlížeč" -msgid "&G-code Preview" -msgstr "&G-code Prohlížeč" +msgid "&Generate" +msgstr "&Generovat" msgid "&Help" msgstr "&Pomoc" @@ -268,7 +258,7 @@ msgid "&New Project" msgstr "&Nový projekt" msgid "&Next >" -msgstr "&Další>" +msgstr "&Další >" msgid "&Open G-code" msgstr "&Otevřít G-code" @@ -277,25 +267,25 @@ msgid "&Open Project" msgstr "&Otevřít projekt" msgid "&Paste" -msgstr "Vloži&t" +msgstr "&Vložit" msgid "&Preferences" -msgstr "Nas&tavení" +msgstr "&Nastavení" msgid "&Quit" -msgstr "Ukonči&t" +msgstr "&Ukončit" msgid "&Redo" msgstr "&Vpřed" msgid "&Repair STL file" -msgstr "Op&ravit soubor STL" +msgstr "&Opravit soubor STL" msgid "&Save Project" msgstr "&Uložit projekt" -msgid "&Select All" -msgstr "Vybrat &Vše" +msgid "&Select all" +msgstr "&Vybrat vše" msgid "&Undo" msgstr "&Zpět" @@ -306,9 +296,29 @@ msgstr "&Zobrazení" msgid "&Window" msgstr "&Okno" +msgid "'As bridge' flow threshold" +msgstr "Práh průtoku Jako most" + +msgid "'As bridge' speed threshold" +msgstr "Práh rychlosti Jako most" + msgid "(All)" msgstr "(Všechny)" +msgid "" +"(even if the acceleration is set to 3000 in the print profile, if this is at " +"1500, it won't export a gcode that will tell to go over 1500)." +msgstr "" +"(i když je zrychlení nastaveno na 3000 v profilu tisku, pokud je to na 1500, " +"nevyexportuje gcode, který řekne, že má jít přes 1500)." + +msgid "" +"(however, speed will never be reduced below %1%mm/s or up to %2%%% reduction)" +msgstr "(rychlost však nebude nikdy snížena pod %1%mm/s nebo až o %2%%% snížení)" + +msgid "(however, speed will never be reduced below %1%mm/s)" +msgstr "(rychlost však nebude nikdy snížena pod %1%mm/s)" + msgid "(including spool)" msgstr "(včetně cívky)" @@ -321,9 +331,6 @@ msgstr "(Znovu)Slicovat" msgid "(Re)Slice No&w" msgstr "&(Znovu) Slicovat" -msgid "(Some lines not shown)" -msgstr "(Některé řádky nejsou zobrazeny)" - msgid "(Unknown)" msgstr "(Neznámý)" @@ -333,20 +340,17 @@ msgstr ") nebyl nalezen." msgid "0 (no open anchors)" msgstr "0 (žádné otevřené kotvy)" -msgid "0 (off)" -msgstr "0 (vypnuto)" - -msgid "1 (light)" -msgstr "1 (slabé)" +msgid "0 (Simple connect)" +msgstr "0 (Jednoduché připojení)" msgid "1000 (unlimited)" -msgstr "1 000 (neomezeně)" +msgstr "1000 (neomezeně)" -msgid "2 (default)" -msgstr "2 (výchozí)" +msgid "2x10°" +msgstr "2x10°" -msgid "3 (heavy)" -msgstr "3 (silné)" +msgid "3D &Plater Tab" +msgstr "Karta 3D &Pohled" msgid "3D editor view" msgstr "Zobrazení 3D editoru" @@ -355,14 +359,48 @@ msgid "3D Honeycomb" msgstr "3D Plástev" msgid "3D Mouse disconnected." -msgstr "3D myš odpojena." +msgstr "3D Myš odpojena." + +msgid "3D view" +msgstr "3D Pohled" msgid "3Dconnexion settings" -msgstr "Nastavení 3DConnexion" +msgstr "Nastavení 3D Připojení" + +msgid "3MF file exported to %s" +msgstr "Soubor 3MF byl exportován do %s" + +msgid "3x10°" +msgstr "3x10°" + +msgid "3x5°" +msgstr "3x5°" + +msgid "4x10°" +msgstr "4x10°" + +msgid "5x5°" +msgstr "5x5°" + +msgid ": Open hyperlink" +msgstr ": Otevřít hypertextový odkaz" msgid "< &Back" msgstr "<&Zpět" +msgid "" +"[Deprecated] Prefer using max_gcode_per_second instead, as it's much better " +"when you have very different speeds for features.\n" +"Too many too small commands may overload the firmware / connection. Put a " +"higher value here if you see strange slowdown.\n" +"Set zero to disable." +msgstr "" +"[Zastaralé] Raději místo toho použijte max_gcode_per_second, protože je to mnohem " +"lepší když máte velmi rozdílné rychlosti pro funkce.\n" +"Příliš mnoho příliš malých příkazů může přetížit firmware / připojení. Vložte zde " +"vyšší hodnota, pokud uvidíte podivné zpomalení.\n" +"Nastavit nulu pro zakázání." + msgid "" "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n" "To enable \"%1%\", please switch off \"%2%\"" @@ -371,62 +409,48 @@ msgstr "" "Chcete-li povolit \"%1%\",, vypněte \"%2%\"" msgid "" -"\"G92 E0\" was found in before_layer_gcode, which is incompatible with " -"absolute extruder addressing." +"\n" +"\n" +"If estimated layer time is below ~%1%s" msgstr "" -"V before_layer_gcode byl nalezen kód \"G92 E0\", který není kompatibilní s " -"absolutním adresováním extruderu." +"\n" +"\n" +"Pokud je odhadovaný čas vrstvy pod ~%1%s" msgid "" -"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " -"extruder addressing." +"\n" +"\n" +"If estimated layer time is below ~%1%s, but still greater than ~%2%s, fan " +"will run at a proportionally increasing speed between %3%%% and %4%%%" msgstr "" -"V kódu layer_gcode byl nalezen kód \"G92 E0\", který není kompatibilní s " -"absolutním adresováním extruderu." +"\n" +"\n" +"Pokud je odhadovaná doba vrstvy nižší než ~%1%s, ale stále větší než ~%2%s, " +"ventilátor poběží úměrně rostoucí rychlostí mezi %3%%% a %4%%%" msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" -"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. " -"Pokud je tento logický výraz pravdivý, potom je tento profil považován za " -"kompatibilní s aktivním profilem tiskárny." +"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. Pokud " +"je tento logický výraz pravdivý, potom je tento profil považován za kompatibilní s " +"aktivním profilem tiskárny." msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" -"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. " -"Pokud je tento logický výraz pravdivý, potom je tento profil považován za " -"kompatibilní s aktivním profilem tiskárny." +"Logický výraz může používat konfigurační hodnoty aktivního profilu tiskárny. Pokud " +"je tento logický výraz pravdivý, potom je tento profil považován za kompatibilní s " +"aktivním profilem tiskárny." msgid "" "A copy of the current system preset will be created, which will be detached " "from the system preset." msgstr "Bude vytvořena oddělená kopie aktuálního systémového přednastavení." -msgid "A new filament was installed and it will be activated." -msgstr "Byl nainstalován nový filament a bude aktivován." - -msgid "A new Printer was installed and it will be activated." -msgstr "Byla nainstalována nová tiskárna, která bude aktivována." - -msgid "A new SLA material was installed and it will be activated." -msgstr "Byl nainstalován nový SLA materiál a bude aktivován." - -msgid "A new vendor was installed and one of its printers will be activated" -msgid_plural "" -"New vendors were installed and one of theirs printers will be activated" -msgstr[0] "Byl instalován nový výrobce a jedna z jeho tiskáren bude aktivována" -msgstr[1] "" -"Byli nainstalováni noví výrobci a bude aktivována jedna z jejich tiskáren" -msgstr[2] "" -"Byli nainstalováni noví výrobci a bude aktivována jedna z jejich tiskáren" -msgstr[3] "" -"Byli nainstalováni noví výrobci a bude aktivována jedna z jejich tiskáren" - msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "Obecným pravidlem je 160 až 230 °C pro PLA a 215 až 250 °C pro ABS." @@ -434,38 +458,41 @@ msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "" -"Obecným pravidlem je 60 °C pro PLA a 110 °C pro ABS. Zadejte nula, pokud " -"nemáte vyhřívanou podložku." - -msgid "" -"A slower printing profile might be necessary when using materials with " -"higher viscosity or with some hollowed parts. It slows down the tilt " -"movement and adds a delay before exposure." -msgstr "" -"Pomalejší tiskový profil může být nutný při použití materiálů s vyšší " -"viskozitou nebo u některých dutých dílů. Zpomaluje pohyb tiltu a přidává " -"zpoždění před osvitem." +"Obecným pravidlem je 60 °C pro PLA a 110 °C pro ABS. Zadejte nula, pokud nemáte " +"vyhřívanou podložku." msgid "A toolpath outside the print area was detected." msgstr "Byla detekována cesta mimo tiskovou oblast." -msgid "Abort" -msgstr "Přerušit" - msgid "About %s" msgstr "O %s" msgid "above" msgstr "nad" +msgid "Above bridge flow ratio" +msgstr "Poměr průtoku nad mostem" + +msgid "Above the bridges" +msgstr "Nad mosty" + msgid "Above Z" msgstr "Nad Z" msgid "Acceleration control (advanced)" msgstr "Kontrola akcelerací (pokročilé)" -msgid "Access violation" -msgstr "Porušení přístupu" +msgid "" +"Acceleration for travel moves (jumps between distant extrusion points).\n" +"Note that the deceleration of a travel will use the acceleration value of " +"the extrusion that will be printed after it (if any)" +msgstr "" +"Zrychlení pro pojezdové pohyby (skoky mezi vzdálenými vysunutými body).\n" +"Všimněte si, že při zpomalení jízdy se použije hodnota zrychlení extruze, která " +"bude vytištěna po něm (pokud existuje)" + +msgid "Access via settings button in the top menu" +msgstr "Přístup přes tlačítko nastavení v horní nabídce" msgid "Accuracy" msgstr "Přesnost" @@ -479,6 +506,27 @@ msgstr "Akce" msgid "Activate" msgstr "Aktivovat" +msgid "" +"Activate this option to modify the flow to acknowledge that the nozzle is " +"round and the corners will have a round shape, and so change the flow to " +"realize that and avoid over-extrusion. 100% is activated, 0% is deactivated " +"and 50% is half-activated.\n" +"Note: At 100% this changes the flow by ~5% over a very small distance " +"(~nozzle diameter), so it shouldn't be noticeable unless you have a very big " +"nozzle and a very precise printer.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Aktivujte tuto možnost, chcete-li upravit průtok, abyste potvrdili, že tryska je " +"kulatý a rohy budou mít kulatý tvar, a tak změňte tok na uvědomte si to a vyhněte " +"se nadměrnému vytlačování. 100 % je aktivováno, 0 % je deaktivovánoa 50 % je napůl " +"aktivováno.\n" +"Poznámka: Při 100% to změní průtok o ~5% na velmi malou vzdálenost.(~průměr " +"trysky), takže by to nemělo být patrné, pokud nemáte velmi velký tryska a velmi " +"přesná tiskárna.\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může to " +"býtodstraněno, pokud pro to není použití." + msgid "Active" msgstr "Aktivní" @@ -491,11 +539,20 @@ msgstr "Adaptivní" msgid "Adaptive Cubic" msgstr "Kubický adaptivní" -msgid "Add" -msgstr "Přidat" - msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\"" -msgstr "Přidat \"%1%\" jako další přednasatevení pro fyzickou tikárnu \"%2%\"" +msgstr "Přidat \"%1%\" jako další přednastavení pro fyzickou tiskárnu \"%2%\"" + +msgid "" +"Add a M106 S255 (max speed for fan) for this amount of seconds before going " +"down to the desired speed to kick-start the cooling fan.\n" +"This value is used for a 0->100% speedup, it will go down if the delta is " +"lower.\n" +"Set to 0 to deactivate." +msgstr "" +"Přidejte M106 S255 (Max rychlost pro ventilátor) na toto množství sekund, než " +"odejdete snížit na požadovanou rychlost, aby se nastartoval chladicí ventilátor.\n" +"Tato hodnota se používá pro zrychlení 0->100% sníží se, pokud je delta nižší.\n" +"Nastavte na 0 pro deaktivaci." msgid "Add a pad underneath the supported model" msgstr "Pod podepíraný model přidá podložku" @@ -526,8 +583,8 @@ msgid "" "Add color change - Left click for predefined color or Shift + Left click for " "custom color selection" msgstr "" -"Přidat změnu barvy - Levé tlačítko myši pro předdefinovanou barvu, nebo " -"Shift + Levé tlačítko myši pro výběr vlastní barvy" +"Přidat změnu barvy - Levé tlačítko myši pro předdefinovanou barvu, nebo Shift + " +"Levé tlačítko myši pro výběr vlastní barvy" msgid "Add color change marker for current layer" msgstr "Přidat značku změny barvy pro aktuální vrstvu" @@ -568,21 +625,68 @@ msgstr "Přidat rozsah vrstev" msgid "Add Layers" msgstr "Přidat Vrstvy" -msgid "Add pause print" -msgstr "Přidat pozastavení tisku" +msgid "Add modifier" +msgstr "Přidat modifikátor" -msgid "Add physical printer" -msgstr "Přidat fyzickou tiskárnu" +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters until all overhangs are filled.\n" +"!! this is a very slow algorithm !!\n" +"If you use this setting, strongly consider also using overhangs_reverse." +msgstr "" +"V případě potřeby přidejte další Perimetry, abyste se vyhnuli mezerám ve šikmých " +"stěnách. Slic3r stále přidává Perimetry, dokud nejsou vyplněny všechny převisy.\n" +"!! toto je velmi pomalý algoritmus!!\n" +"Pokud použijete toto nastavení, rozhodně zvažte použití obráceného převisu." -msgid "Add point" -msgstr "Přidat bod" +msgid "" +"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " +"keeps adding perimeters, until more than 70% of the loop immediately above " +"is supported.\n" +"If you succeed in triggering the algorithm behind this setting, please send " +"me a message. Personally, I think it's useless." +msgstr "" +"V případě potřeby přidejte další Perimetry, abyste se vyhnuli mezerám ve šikmých " +"stěnách. Slic3r stále přidává Perimetry, dokud není více než 70 % smyčky " +"bezprostředně najde podporováno.\n" +"Pokud se vám podaří spustit algoritmus za tímto nastavením, pošlete prosím Mně " +"zprávu. Osobně si myslím, že je to zbytečné." -msgid "Add point to selection" -msgstr "Přidat bod k výběru" +msgid "Add one more instance of the selected object" +msgstr "Přidejte jednu nebo více instancí vybraného objektu" + +msgid "" +"Add one perimeter every odd layer. With this, infill is taken into the " +"sandwich and you may be able to reduce drastically the infill/perimeter " +"overlap setting. " +msgstr "" +"Každé liché vrstvě přidejte jeden Perimetr. Tím se výplň převezme do sendvič a " +"možná budete schopni drasticky zmenšit výplň/Perimetr nastavení překrytí. " + +msgid "Add part" +msgstr "Přidat díl" + +msgid "Add pause print" +msgstr "Přidat pozastavení tisku" + +msgid "Add physical printer" +msgstr "Přidat fyzickou tiskárnu" + +msgid "Add point" +msgstr "Přidat bod" + +msgid "Add point to selection" +msgstr "Přidat bod k výběru" msgid "Add preset for this printer device" msgstr "Přidat přednastavení pro tuto tiskárnu" +msgid "Add seam position" +msgstr "Přidat polohu švu" + +msgid "Add settings" +msgstr "Přidat nastavení" + msgid "Add Settings Bundle for Height range" msgstr "Přidání Skupiny nastavení pro Výškový rozsah" @@ -599,16 +703,25 @@ msgid "Add Settings for Object" msgstr "Přidání nastavení pro Objekty" msgid "Add Settings for Sub-object" -msgstr "Přidání nastavení pro Dílčí objeky" +msgstr "Přidání nastavení pro Dílčí objekt" msgid "Add Shape" msgstr "Přidat Tvar" -msgid "Add Shape from Gallery" -msgstr "Přidání tvaru z galerie" +msgid "" +"Add solid infill near sloping surfaces to guarantee the vertical shell " +"thickness (top+bottom solid layers).\n" +"!! solid_over_perimeters may erase these surfaces !!" +msgstr "" +"Přidejte plnou výplň blízko šikmých ploch, abyste zaručili vertikální " +"skořepinutloušťka (horní + spodní plné vrstvy).\n" +"!! solid_over_perimeters mohou tyto povrchy vymazat!!" -msgid "Add Shapes from Gallery" -msgstr "Přidat tvary z galerie" +msgid "Add support blocker" +msgstr "Přidat blokátor podpěr" + +msgid "Add support enforcer" +msgstr "Přidat vynucení podpěr" msgid "Add support point" msgstr "Přidání podpěrného bodu" @@ -619,14 +732,25 @@ msgstr "Přidání podpěr" msgid "Add supports by angle" msgstr "Přidat podpěry dle úhlu" +msgid "" +"Add this angle each layer to the base angle for infill. May be useful for " +"art, or to be sure to hit every object's feature even with very low infill. " +"Still experimental, tell me what makes it useful, or the problems that arise " +"using it." +msgstr "" +"Přidejte tento úhel každé vrstvy k základnímu úhlu pro výplň. Může být užitečné pro " +"umění, nebo abyste měli jistotu, že zasáhnete rysy každého objektu i s velmi nízkou " +"výplní.Stále experimentální, řekněte mi, v čem je užitečný nebo jaké problémy se " +"objevujípoužívat to." + msgid "Add..." msgstr "Přidat..." msgid "Add/Remove filaments" -msgstr "Přidání / Odebrání filamentů" +msgstr "Přidání/Odebrání filamentů" msgid "Add/Remove materials" -msgstr "Přidání / Odebrání materiálů" +msgstr "Přidání/Odebrání materiálů" msgid "Add/Remove presets" msgstr "Přidat/Odebrat přednastavení" @@ -643,20 +767,28 @@ msgstr "Další nastavení" msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." -msgstr "" -"Dále je před nainstalováním aktualizace vytvořena záloha veškerého nastavení." +msgstr "Dále je před nainstalováním aktualizace vytvořena záloha veškerého nastavení." msgid "Address" msgstr "Adresa" msgid "Advanced" -msgstr "Pokročilý" +msgstr "Pokročilé" + +msgid "Advanced Infill options" +msgstr "Pokročilé možnosti výplně" msgid "Advanced mode" msgstr "Pokročilý režim" +msgid "Advanced View Mode" +msgstr "Pokročilý režim" + +msgid "Advanced wipe tower purge volume calculs" +msgstr "Pokročilý výpočet objemu čištění stírací věže" + msgid "Advanced: Output log" -msgstr "Pokročilý:  Výstupní log" +msgstr "Pokročilý: Výstupní log" msgid "" "After a tool change, the exact position of the newly loaded filament inside " @@ -665,14 +797,33 @@ msgid "" "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" -"Po výměně nástroje nemusí být známa přesná poloha nově zavedeného filamentu " -"uvnitř trysky a tlak filamentu pravděpodobně ještě není stabilní. Před " -"vyčištěním tiskové hlavy do výplně nebo do objektu bude Slic3r toto množství " -"materiálu vždy vytlačovat do čistící věže, aby se spolehlivě vytvořily " -"následné výplně nebo objekty." +"Po výměně nástroje nemusí být známa přesná poloha nově zavedeného filamentu uvnitř " +"trysky a tlak filamentu pravděpodobně ještě není stabilní. Před vyčištěním tiskové " +"hlavy do výplně nebo do objektu bude Slic3r toto množství materiálu vždy vytlačovat " +"do čistící věže, aby se spolehlivě vytvořily následné výplně nebo objekty." + +msgid "after last perimeter" +msgstr "Po posledním perimetru" msgid "After layer change G-code" -msgstr "G-code po změně vrstvy" +msgstr "G-Code po změně vrstvy" + +msgid "Algorithm" +msgstr "Algoritmus" + +msgid "" +"Algorithm for the advanced wipe.\n" +"Linear : volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)\n" +"Quadratic: volume = nozzle + volume_mult * (pigmentBefore-pigmentAfter)+ " +"volume_mult * (pigmentBefore-pigmentAfter)^3\n" +"Hyperbola: volume = nozzle + volume_mult * (0.5+pigmentBefore) / " +"(0.5+pigmentAfter)" +msgstr "" +"Algoritmus pro pokročilé vymazání.\n" +"Lineární: objem = tryska + objem mult * (pigment Před pigmentem Po)\n" +"Quadratic: objem = tryska + objem mult * (pigment Před pigmentem Po)+volume mult * " +"(pigment Before pigment After)^3\n" +"Hyperbola: objem = tryska + objem mult * (0,5 + pigment předtím) / (0,5+pigment po)" msgid "Align the model to the given point." msgstr "Zarovnejte model s daným bodem." @@ -686,15 +837,40 @@ msgstr "Zarovnaný" msgid "All" msgstr "Všechny" -msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" +msgid "" +"All characters that are written here will be replaced by '_' when writing " +"the gcode file name.\n" +"If the first charater is '[' or '(', then this field will be considered as a " +"regexp (enter '[^a-zA-Z0-9]' to only use ascii char)." msgstr "" -"Všechna gizma: Rotace - levé talčítko myši; Posun - pravé tlačítko myši" +"Všechny znaky, které jsou zde napsány, budou při psaní nahrazeny '_'název souboru " +"gcode.\n" +"Pokud je první znak '[' nebo '(', bude toto pole považováno za regexp (zadejte '[^a-" +"zA-Z0-9]', chcete-li použít pouze ascii znak)." -msgid "All installed printers are compatible with the selected %1%." -msgstr "Všechny instalované tiskárny jsou kompatibilní s vybraným %1%." +msgid "" +"All characters that are written here will be replaced by '_' when writing " +"the gcode file name.\n" +"If the first charater is '[' or '(', then this field will be considered as a " +"regexp (enter '[^a-zA-Z]' to only use ascii char)." +msgstr "" +"Všechny znaky, které jsou zde napsány, budou při psaní nahrazeny '_'název souboru " +"gcode.\n" +"Pokud je první znak '[' nebo '(', bude toto pole považováno za regexp (zadejte '[^a-" +"zA-Z]', chcete-li použít pouze ascii znak)." -msgid "All non-solid parts (modifiers) were deleted" -msgstr "Všechny modifikátory byly odstraněny" +msgid "" +"All gaps, between the last perimeter and the infill, which are thinner than " +"a perimeter will be filled by gapfill." +msgstr "" +"Všechny mezery mezi posledním perimetrem a výplní, které jsou tenčí než perimetr " +"bude vyplněn mezerou." + +msgid "All gizmos: Rotate - left mouse button; Pan - right mouse button" +msgstr "Všechna gizma: Rotace - levé tlačítko myši; Posun - pravé tlačítko myši" + +msgid "All installed printers are compatible with the selected filament." +msgstr "Všechny instalované tiskárny jsou kompatibilní s vybraným filamentem." msgid "All objects are outside of the print volume." msgstr "Všechny objekty jsou mimo tiskový prostor." @@ -705,9 +881,6 @@ msgstr "Všechny objekty budou odebrány, pokračovat?" msgid "All settings changes will be discarded." msgstr "Všechny změny v nastavení budou zahozeny." -msgid "All settings changes will not be saved" -msgstr "Všechny změny nastavení se neuloží" - msgid "All solid surfaces" msgstr "Všechny plné povrchy" @@ -717,55 +890,93 @@ msgstr "Všechny běžné" msgid "All top surfaces" msgstr "Všechny horní povrchy" -msgid "All user presets will be deleted." -msgstr "Všechna uživatelská přednastavení budou odstraněna." - -msgid "All walls" -msgstr "Všechny stěny" - msgid "allocation failed" msgstr "alokace selhala" -msgid "Allow next color repetition" -msgstr "Povolit další opakování barvy" +msgid "Allow all perimeters to overlap, instead of just external ones." +msgstr "Umožněte překrytí všech perimetrů, nikoli pouze vnějších." -msgid "Allows painting only on facets selected by: \"%1%\"" -msgstr "Umožňuje malovat pouze na fasety vybrané pomocí: \"%1%\"" +msgid "Allow empty layers" +msgstr "Povolit prázdné vrstvy" -msgid "Alt + Mouse wheel" -msgstr "Alt + kolečko myši" +msgid "Allow fan delay on overhangs" +msgstr "Povolit zpoždění ventilátoru na převisech" -msgid "Alternate nozzles:" -msgstr "Alternativní trysky:" +msgid "Allow just a single %1% instance" +msgstr "Povolit pouze jednu %1% instanci" -msgid "Always ask for unsaved changes in presets when creating new project" +msgid "Allow only one skirt loop" +msgstr "Povolit pouze jednu smyčku sukně" + +msgid "" +"Allow outermost perimeter to overlap itself to avoid the use of thin walls. " +"Note that flow isn't adjusted and so this will result in over-extruding and " +"undefined behavior." msgstr "" -"Při vytváření nového projektu se vždy zeptat na neuložené změny přednastavení" +"Umožněte vnějšímu perimetru, aby se překrýval, abyste se vyhnuli použití tenkých " +"stěn. Všimněte si, že tok není upraven, takže to povede k nadměrnému vytlačování a." msgid "" -"Always ask for unsaved changes in presets when selecting new preset or " -"resetting a preset" +"Allow Slic3r to compute the purge volume via smart computations. Use the " +"pigment% of each filament and following parameters" msgstr "" -"Při výběru nového přednastavení nebo resetování přednastavení se vždy " -"dotazovat na neuložené změny přednastavení" +"Umožněte Slic3r vypočítat objem čištění pomocí inteligentních výpočtů. Použijte " +"pigment% z každého vlákna a následující parametry" msgid "" -"An existing configuration was found in %3%\n" -"created by %1% %2%.\n" -"\n" -"Shall this configuration be imported?" +"Allow the external perimeter to merge the thin walls in the path. You can " +"deactivate this if you are using thin walls as a custom support, to reduce " +"adhesion a little." msgstr "" -"Stávající konfigurace byla nalezena ve složce %3%\n" -"vytvořená programem %1% %2%.\n" -"\n" -"Má být tato konfigurace importována?" +"Umožněte vnějšímu perimetru spojit tenké stěny v cestě. Můžete deaktivujte, pokud " +"používáte tenké stěny jako vlastní podporu, abyste snížili trochu adheze." msgid "" -"An object has custom support enforcers which will not be used because " -"supports are disabled." +"Allow to create a brim over an island when it's inside a hole (or surrounded " +"by an object)." msgstr "" -"Na objektu jsou definované vynucené podpěry, které nebudou použity, protože " -"podpěry jsou zakázány." +"Umožněte vytvořit okraj nad ostrůvkem, když je uvnitř díry (nebo je obklopen " +"předmětem)." + +msgid "Along X axis" +msgstr "Podél osy X" + +msgid "Along Y axis" +msgstr "Podél osy Y" + +msgid "Along Z axis" +msgstr "Podél osy Z" + +msgid "Also emit limits to G-code" +msgstr "Vysílat také limity pro G-kód" + +msgid "Also for all perimeters" +msgstr "Také pro všechny perimetry" + +msgid "Alt + Mouse wheel" +msgstr "Alt + kolečko myši" + +msgid "Alternate nozzles:" +msgstr "Alternativní trysky:" + +msgid "Always ask for unsaved changes when selecting new preset" +msgstr "Při výběru nového přednastavení se vždy dotázat na neuložené změny" + +msgid "" +"Always ask if you want to save your project change if you are going to loose " +"some changes. Or it will discard them by deafult." +msgstr "" +"Vždy se zeptejte, zda chcete uložit změnu projektu, pokud ztratíteNějaké změny. " +"Nebo je zahodí." + +msgid "Always keep current preset changes on a new project" +msgstr "Vždy zachovat aktuální přednastavené změny v novém projektu" + +msgid "AMF file exported to %s" +msgstr "Soubor AMF byl exportován do %s" + +msgid "Amount of lift for travel." +msgstr "Množství zdvihu pro cestování." msgid "An object outside the print area was detected." msgstr "Byl detekován objekt mimo tiskovou oblast." @@ -777,6 +988,21 @@ msgstr "" "Byl detekován objekt mimo tiskovou oblast.\n" "Pro pokračování ve slicování vyřešte tento problém." +msgid "Anchor solid infill by X mm" +msgstr "Plná výplň kotvy o X mm" + +msgid "Anchored" +msgstr "Ukotvený" + +msgid " and will gradually speed-up to the above speeds over %1% layers" +msgstr " a postupně se zrychlí na výše uvedené rychlosti přes %1% vrstev" + +msgid "Angle" +msgstr "Úhel" + +msgid "Angle cost" +msgstr "Cena úhlu" + msgid "Another export job is currently running." msgstr "V současné době běží jiná úloha exportu." @@ -786,8 +1012,7 @@ msgstr "Šipky" msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "" -"Jakékoliv úpravy by měly být uloženy jako nové přednastavení zděděná z " -"tohoto." +"Jakékoliv úpravy by měly být uloženy jako nové přednastavení zděděná z tohoto." msgid "API key" msgstr "API klíč" @@ -795,20 +1020,17 @@ msgstr "API klíč" msgid "API Key / Password" msgstr "API klíč / Heslo" +msgid "Appearance" +msgstr "Vzhled" + msgid "Application preferences" msgstr "Nastavení aplikace" -msgid "Apply" -msgstr "Použít" - msgid "Apply changes" msgstr "Aplikovat změny" -msgid "Apply color change automatically" -msgstr "Automaticky aplikovat změnu barvy" - -msgid "Apply to all the remaining small objects being loaded." -msgstr "Použít na všechny zbývající malé načítané objekty." +msgid "Apply on" +msgstr "Použít na" msgid "approximate seconds" msgstr "vteřin přibližně" @@ -835,21 +1057,23 @@ msgstr "Opravdu chcete pokračovat?" msgid "" "Are you sure you want to delete \"%1%\" preset from the physical printer " "\"%2%\"?" -msgstr "" -"Opravdu chcete odstranit přednastavení \"%1%\" z fyzické tiskárny \"%2%\"?" +msgstr "Opravdu chcete odstranit přednastavení \"%1%\" z fyzické tiskárny \"%2%\"?" msgid "Are you sure you want to delete \"%1%\" printer?" msgstr "Opravdu chcete odstranit tiskárnu \"%1%\"?" -msgid "Are you sure you want to delete all substitutions?" -msgstr "Jste si jisti, že chcete odstranit všechna nahrazení?" - msgid "Are you sure you want to do it?" msgstr "Opravdu to chcete udělat?" +msgid "Are you sure?" +msgstr "Jsi si jistý?" + msgid "Area fill" msgstr "Zaplněná plocha" +msgid "Around object" +msgstr "Okolo objektu" + msgid "Arrange" msgstr "Uspořádat" @@ -863,17 +1087,8 @@ msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" -"Uspořádejte modely na tiskovou podložku a slučte je do jednoho modelu, " -"abyste s nimi mohli provádět akce jednou." - -msgid "" -"Arrangement ignored the following objects which can't fit into a single " -"bed:\n" -"%s" -msgstr "" -"Uspořádání ignorovalo následující objekty, které se nevejdou na jednu " -"podložku:\n" -"%s" +"Uspořádejte modely na tiskovou podložku a slučte je do jednoho modelu, abyste s " +"nimi mohli provádět akce jednou." msgid "Arranging" msgstr "Uspořádávání" @@ -896,22 +1111,48 @@ msgstr "Šipka vpravo" msgid "Arrow Up" msgstr "Šipka nahoru" -msgid "Ask for unsaved changes in presets when creating new project" +msgid "Artwork model by" +msgstr "Umělecký model od" + +msgid "" +"As a workaround, you may run %s with a software rendered 3D graphics by " +"running %s.exe with the --sw-renderer parameter." msgstr "" -"Dotázat se na neuložené změny v přednastavení při vytváření nového projektu" +"Jako řešení můžete spustit %s se softwarově vykreslenou 3D grafikou pomocí spuštění " +"%s.exe s parametrem --sw-renderer." -msgid "Ask for unsaved changes in presets when selecting new preset" -msgstr "Zeptat se na neuložené změny v přednastavení při výběru nového profilu" +msgid "Ask for unsaved changes when closing application" +msgstr "Zeptat se na neuložené změny při zavírání aplikace" -msgid "Ask for unsaved changes in project" -msgstr "Dotázat se na neuložené změny v projektu" +msgid "Ask for unsaved changes when selecting new preset" +msgstr "Zeptat se na neuložené změny při výběru nového profilu" -msgid "" -"Ask to save unsaved changes in presets when closing the application or when " -"loading a new project" -msgstr "" -"Dotazovat se na uložení neuložených změn v přednastavení při zavírání " -"aplikace nebo při načítání nového projektu" +msgid "Ask for unsaved project changes" +msgstr "Požádat o neuložené změny projektu" + +msgid "Associate .3mf files to %1%" +msgstr "Přidružit soubory .3mf k %1%" + +msgid "Associate .gcode files to %1%" +msgstr "Přidružit soubory .gcode k %1%" + +msgid "Associate .stl files to %1%" +msgstr "Přidružit soubory .stl k %1%" + +msgid "at %1%%% over all bridges" +msgstr "na %1%%% přes všechny mosty" + +msgid "at %1%%% over bridges" +msgstr "na %1%%% přes mosty" + +msgid "at %1%%% over external perimeters" +msgstr "na %1%%% přes vnější perimetry" + +msgid "at %1%%% over infill bridges" +msgstr "při %1%%% přes výplňové můstky" + +msgid "at %1%%% over top fill surfaces" +msgstr "na %1%%% nad horními výplňovými plochami" msgid "Attention!" msgstr "Pozor!" @@ -928,12 +1169,17 @@ msgstr "Auto-centrování objektů" msgid "Auto-generate points" msgstr "Automatické generování bodů" -msgid "Auto-repaired %1$d error" -msgid_plural "Auto-repaired %1$d errors" -msgstr[0] "%1$d automaticky opravená chyba" -msgstr[1] "%1$d automaticky opravené chyby" -msgstr[2] "%1$d automaticky opravené chyby" -msgstr[3] "%1$d automaticky opravených chyb" +msgid "Auto-repaired (%d errors)" +msgstr "Automaticky opraveno (%d chyb)" + +msgid "Auto-repaired (%d errors):" +msgstr "Automaticky opraveno ( %d chyb):" + +msgid "Auto-wipe algorithm" +msgstr "Algoritmus automatického mazání" + +msgid "Auto-wipe multiplier" +msgstr "Násobitel automatického vymazání" msgid "Autodetected" msgstr "Automaticky detekováno" @@ -944,15 +1190,36 @@ msgstr "Automatické generování podpěrných bodů" msgid "Autogeneration will erase all manually edited points." msgstr "Automatické generování vymaže všechny ručně vytvořené body." +msgid "Automatic" +msgstr "Automatický" + msgid "Automatic generation" msgstr "Automatické generování" msgid "Automatic updates" msgstr "Automatické aktualizace" +msgid "Automatic, only for small areas" +msgstr "Automaticky, pouze pro malé oblasti" + +msgid "Automatic, or anchored if too big" +msgstr "Automatické nebo ukotvené, pokud je příliš velké" + +msgid "Automatic, unless full" +msgstr "Automatické nebo ukotvené, pokud je příliš velké" + msgid "Automatically repair an STL file" msgstr "Automaticky opravit STL soubor" +msgid "Automation" +msgstr "Automatizace" + +msgid "Autoset by angle" +msgstr "Automaticky podle úhlu" + +msgid "Autoset custom supports" +msgstr "Automatické nastavení podpěr" + msgid "Autospeed (advanced)" msgstr "Automatická rychlost (pokročilé)" @@ -960,7 +1227,7 @@ msgid "Avoid crossing perimeters" msgstr "Vyhnout se přejíždění perimetrů" msgid "Avoid crossing perimeters - Max detour length" -msgstr "Vyhnout se přejíždění perimetrů - maximální délka objízdné cesty" +msgstr "Vyhnout se přejíždění perimetrů - Max délka objízdné cesty" msgid "BACK ARROW" msgstr "ŠIPKA ZPĚT" @@ -973,27 +1240,30 @@ msgid "" msgstr "" "Ikona ŠIPKY ZPĚT indikuje, že došlo ke změně nastavení, které není shodné s " "naposledy uloženým přednastavením pro aktuální skupinu nastavení.\n" -"Klikněte pro reset všech nastavení pro aktuální skupinu nastavení na " -"naposledy uložené přednastavení." +"Klikněte pro reset všech nastavení pro aktuální skupinu nastavení na naposledy " +"uložené přednastavení." msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" -"Ikona ŠIPKY ZPĚT indikuje, že se hodnota změnila a není shodná s naposledy " -"uloženým přednastavením.\n" +"Ikona ŠIPKY ZPĚT indikuje, že se hodnota změnila a není shodná s naposledy uloženým " +"přednastavením.\n" "Klikněte pro reset současné hodnoty na naposledy uložené přednastavení." msgid "Background processing" msgstr "Zpracování na pozadí" -msgid "Bail out on unknown configuration values" -msgstr "Záchrana při neznámých hodnotách konfigurace" +msgid "backwards edges" +msgstr "zadní okraje" msgid "Balanced" msgstr "Vyvážené" +msgid "Base Layer height" +msgstr "Výška vrstvy" + msgid "Bed" msgstr "Tisková podložka" @@ -1003,6 +1273,9 @@ msgstr "Vlastní model podložky" msgid "Bed custom texture" msgstr "Vlastní textura podložky" +msgid "Bed on thumbnail" +msgstr "Postel na miniatuře" + msgid "Bed Shape" msgstr "Tvar tiskové podložky" @@ -1015,26 +1288,60 @@ msgstr "Tvar a rozměr podložky" msgid "Bed temperature" msgstr "Teplota tiskové podložky" +msgid "" +"Bed temperature for layers after the first one. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Teplota lože pro vrstvy po první. Nastavte nulu pro deaktivaci lůžka příkazy řízení " +"teploty na výstupu." + msgid "Bed Temperature:" msgstr "Teplota tiskové podložky:" +msgid "Bed/Extruder leveling" +msgstr "Vyrovnání lůžka/extrudéru" + msgid "Before layer change G-code" -msgstr "G-code před změnou vrstvy" +msgstr "G-Code před změnou vrstvy" msgid "Before roll back" msgstr "Před vrácením zpět" +msgid "Behavior" +msgstr "Chování" + +msgid "Below object" +msgstr "Pod objektem" + msgid "Below Z" msgstr "Pod Z" -msgid "Best surface quality" -msgstr "Nejlepší kvalita povrchu" +msgid "Better bonding" +msgstr "Lepší spojení" + +msgid "between %1%%% %2%%% over bridges" +msgstr "mezi %1%%% %2%%% přes mosty" + +msgid "between %1%%% %2%%% over external perimeters" +msgstr "mezi %1%%% %2%%% přes vnější perimetry" + +msgid "between %1%%% %2%%% over infill bridges" +msgstr "mezi %1%%% %2%%% přes výplňové můstky" + +msgid "Between extrusion role change G-code" +msgstr "Mezi změnou role G-kódu vytlačování" msgid "Between objects G-code" -msgstr "G-code mezi objekty" +msgstr "G-Code mezi objekty" msgid "Between objects G-code (for sequential printing)" -msgstr "G-code mezi objekty (pro sekvenční tisk)" +msgstr "G-Code mezi objekty (pro sekvenční tisk)" + +msgid "Big" +msgstr "Velký" + +msgid "Block" +msgstr "Blokovat" msgid "Block seam" msgstr "Blokace švu" @@ -1052,14 +1359,11 @@ msgid "Bottle weight" msgstr "Hmotnost láhve" msgid "Bottom" -msgstr "Zespod" +msgstr "Spodní" msgid "Bottom fill pattern" msgstr "Vzor spodní výplně" -msgid "Bottom interface layers" -msgstr "Spodní kontaktní vrstvy" - msgid "Bottom is open." msgstr "Spodní část je otevřená." @@ -1072,8 +1376,23 @@ msgstr "Plné spodní vrstvy" msgid "Bottom View" msgstr "Pohled zespod" +msgid "Box" +msgstr "Kostka" + msgid "Bridge" -msgstr "Most" +msgstr "Mosty" + +msgid "Bridge acceleration" +msgstr "Zrychlení mostu" + +msgid "Bridge calibration" +msgstr "Kalibrace mostu" + +msgid "Bridge flow" +msgstr "Průtok mostu" + +msgid "Bridge flow calibration" +msgstr "Kalibrace průtoku mostu" msgid "Bridge flow ratio" msgstr "Poměr průtoku při vytváření mostů" @@ -1081,12 +1400,30 @@ msgstr "Poměr průtoku při vytváření mostů" msgid "Bridge infill" msgstr "Výplň mostů" +msgid "Bridge lines density" +msgstr "Hustota mostových čar" + +msgid "Bridge margin" +msgstr "Okraj mostu" + +msgid "Bridge speed" +msgstr "Rychlost mostu" + +msgid "Bridge speed and fan" +msgstr "Rychlost mostu a ventilátoru" + +msgid "Bridged" +msgstr "Přemostěný" + msgid "Bridges" msgstr "Mosty" msgid "Bridges fan speed" msgstr "Rychlost ventilátoru při vytváření mostů" +msgid "Bridging" +msgstr "Přemostění" + msgid "Bridging angle" msgstr "Úhel vytváření mostů" @@ -1095,21 +1432,33 @@ msgid "" "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" -"Přepsání úhlu vytváření mostů. Nastavením hodnoty na nulu se bude úhel " -"vytváření mostů vypočítávat automaticky. Při zadání jiného úhlu bude pro " -"všechny mosty použitý zadaný úhel. Pro nulový úhel zadejte 180°." +"Přepsání úhlu vytváření mostů. Nastavením hodnoty na nulu se bude úhel vytváření " +"mostů vypočítávat automaticky. Při zadání jiného úhlu bude pro všechny mosty " +"použitý zadaný úhel. Pro nulový úhel zadejte 180°." msgid "Bridging volumetric" -msgstr "Volumetrická hodnota mostů" +msgstr "Objemová hodnota mostů" msgid "Brim" msgstr "Límec" -msgid "Brim separation gap" -msgstr "Odsazení límce" +msgid "Brim configuration" +msgstr "Konfigurace límce" -msgid "Brim type" -msgstr "Typ límce" +msgid "Brim ear detection length" +msgstr "Délka detekce límcového ucha" + +msgid "Brim ear max angle" +msgstr "Max úhel okraje ucha" + +msgid "Brim ears" +msgstr "Límec" + +msgid "Brim inside holes" +msgstr "Límec vnitřních otvorů" + +msgid "Brim offset" +msgstr "Odsazení límce" msgid "Brim width" msgstr "Šířka límce" @@ -1117,9 +1466,6 @@ msgstr "Šířka límce" msgid "Browse" msgstr "Procházet" -msgid "Brush" -msgstr "Štětec" - msgid "Brush shape" msgstr "Tvar štětce" @@ -1129,6 +1475,14 @@ msgstr "Velikost štětce" msgid "buffer too small" msgstr "buffer je příliš malý" +msgid "" +"But since this version of %s we don't show this information in Printer " +"Settings anymore.\n" +"Settings will be available in physical printers settings." +msgstr "" +"Ale od této verze %s tyto informace v tiskárně nezobrazujemeUž nastavení.\n" +"Nastavení bude k dispozici v nastavení fyzických tiskáren." + msgid "Buttons And Text Colors Description" msgstr "Barvy pro textové popisky a tlačítka" @@ -1137,28 +1491,44 @@ msgid "" "creation.\n" "Note: This name can be changed later from the physical printers settings" msgstr "" -"Ve výchozím stavu budou při vytváření nové tiskárny pojmenovány jako " -"„Printer N“.\n" +"Ve výchozím stavu budou při vytváření nové tiskárny pojmenovány jako \"Printer N\".\n" "Poznámka: Tento název lze později změnit v nastavení fyzických tiskáren" +msgid "" +"by the print profile maximum volumetric rate of %3.2f mm³/s at filament " +"speed %3.2f mm/s." +msgstr "" +"podle tiskového profilu maximální objemová rychlost %3.2f mm³/s na filamentu " +"rychlost %3.2f mm/s." + +msgid "C&alibration" +msgstr "Kalibrace" + +msgid "Calibration cube" +msgstr "Kalibrační kostka" + msgid "Camera" msgstr "Kamera" msgid "Camera view" msgstr "Pohled kamery" +msgid "" +"Can be useful to avoid bondtech gears deforming hot tips, but not ordinarily " +"needed" +msgstr "" +"Může být užitečné, aby se zabránilo tomu, že ozubená kola bondtech deformují horké " +"hroty, ale ne běžněpotřeboval" + +msgid "Can't process the repetier return message: missing field '%s'" +msgstr "Nelze zpracovat opakovanou návratovou zprávu: chybí pole '%s'" + msgid "Cancel" msgstr "Zrušit" msgid "Cancel selected" msgstr "Zrušit vybrané" -msgid "Cancel upload" -msgstr "Zrušit nahrávání" - -msgid "CANCELED" -msgstr "ZRUŠENO" - msgid "Cancelled" msgstr "Zrušeno" @@ -1170,8 +1540,7 @@ msgstr "Ukončování..." msgid "" "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible." -msgstr "" -"Nelze vypočítat šířku extrudování pro %1%: Proměnná \"%2%\" není dostupná." +msgstr "Nelze vypočítat šířku extrudování pro %1%: Proměnná \"%2%\" není dostupná." msgid "" "Cannot insert a new layer range after the current layer range.\n" @@ -1218,9 +1587,6 @@ msgstr "Možnosti" msgid "Capture a configuration snapshot" msgstr "Vytvořit aktuální zálohu konfigurace" -msgid "Case insensitive" -msgstr "Nerozlišovat malá a velká písmena" - msgid "Category" msgstr "Kategorie" @@ -1233,6 +1599,21 @@ msgstr "Vycentrujte tisk kolem daného středu." msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "Soubory s certifikátem (*.crt, *.pem)|*.crt;*.pem|Všechny soubory|*.*" +msgid "Chamber" +msgstr "Komora" + +msgid "Chamber temperature" +msgstr "Teplota v komoře" + +msgid "" +"Chamber temperature. Note that this setting doesn't do anything, but you can " +"access it in Start G-code, Tool change G-code and the other ones, like for " +"other temperature settings." +msgstr "" +"Teplota v komoře. Všimněte si, že toto nastavení nic nedělá, ale můžete přistupte k " +"němu v kódu Start G-code, Tool Change G-code a dalších, jako pro jiná nastavení " +"teploty." + msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"" msgstr "Změnit \"%1%\" na\"%2%\" pro tuto fyzickou tiskárnu \"%3%\"" @@ -1251,9 +1632,6 @@ msgstr "Změnit Extruder" msgid "Change extruder (N/A)" msgstr "Změnit extruder (N/A)" -msgid "Change extruder color" -msgstr "Změna barvy extruderu" - msgid "Change Extruders" msgstr "Změnit Extrudery" @@ -1266,11 +1644,14 @@ msgstr "Změna typu části" msgid "Change point head diameter" msgstr "Změna průměru hrotu" -msgid "Changelog & Download" -msgstr "Changelog & Stažení" +msgid "Change the number of instances of the selected object" +msgstr "Změní počet instancí vybraného objektu" -msgid "Changes for the critical options" -msgstr "Změny u kritických voleb" +msgid "Change type" +msgstr "Změnit typ" + +msgid "Changelog && Download" +msgstr "Changelog && Stažení" msgid "Changing of an application language" msgstr "Změnit jazyk aplikace" @@ -1278,27 +1659,34 @@ msgstr "Změnit jazyk aplikace" msgid "Check for application updates" msgstr "Zkontrolovat aktualizace aplikace" -msgid "Check for Configuration Updates" -msgstr "Kontrola aktualizace konfigurací" - msgid "Check for configuration updates" msgstr "Zkontrolujte aktualizace konfigurace" +msgid "Check for updates" +msgstr "Zkontrolovat akt&ualizace" + msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" -"Vyberte soubor, ze kterého chcete importovat texturu pro tiskovou podložku " -"(PNG/SVG):" +"Vyberte soubor, ze kterého chcete importovat texturu pro tiskovou podložku (PNG/" +"SVG):" msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "Zvolit soubor ke slicování (STL/OBJ/AMF/3MF/PRUSA):" msgid "Choose an STL file to import bed model from:" -msgstr "" -"Vyberte STL soubor, ze kterého chcete importovat model tiskové podložky:" +msgstr "Vyberte STL soubor, ze kterého chcete importovat model tiskové podložky:" msgid "Choose an STL file to import bed shape from:" -msgstr "" -"Vyberte STL soubor, ze kterého chcete importovat tvar tiskové podložky:" +msgstr "Vyberte STL soubor, ze kterého chcete importovat tvar tiskové podložky:" + +msgid "Choose how many digits after the dot for extruder moves." +msgstr "Vyberte, kolik číslic za tečkou pro extruder se pohybuje." + +msgid "Choose how many digits after the dot for xyz coordinates." +msgstr "Vyberte, kolik číslic za tečkou pro souřadnice xyz." + +msgid "Choose how the windows are selectable and displayed:" +msgstr "Vyberte způsob výběru a zobrazení oken:" msgid "Choose one file (3MF/AMF):" msgstr "Vyberte jeden soubor (3MF/AMF):" @@ -1306,30 +1694,43 @@ msgstr "Vyberte jeden soubor (3MF/AMF):" msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):" msgstr "Vyberte jeden soubor (GCODE/.GCO/.G/.ngc/NGC):" +msgid "Choose one file (py):" +msgstr "Vyberte jeden soubor (py):" + msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "Vyberte jeden nebo více souborů (STL/OBJ/AMF/3MF/PRUSA):" msgid "Choose SLA archive:" msgstr "Vyberte SLA archiv:" +msgid "Choose the image to use as splashscreen" +msgstr "Vyberte obrázek, který chcete použít jako úvodní obrazovku" + msgid "Choose the type of firmware used by your printer." msgstr "Vyberte typ firmware používaný vaší tiskárnou." +msgid "" +"Choose the way the dense layer is laid out. The automatic option lets it try " +"to draw the smallest surface with only strait lines inside the sparse " +"infill. The Anchored option just slightly enlarges (by 'Default infill " +"margin') the surfaces that need a better support." +msgstr "" +"Vyberte způsob rozložení husté vrstvy. Automatická možnost to nechá zkusitnakreslit " +"nejmenší povrch pouze s úžinami uvnitř řídkéhoinfill. Možnost Ukotvená se jen mírně " +"zvětší (podle 'Výchozí výplň margin) povrchy, které potřebují lepší podporu." + +msgid "Chrono" +msgstr "Chrono" + +msgid "Chronology" +msgstr "Chronologie" + msgid "Circle" msgstr "Kruh" msgid "Circular" msgstr "Kruhový" -msgid "Clear Undo / Redo stack on new project" -msgstr "Vymazat historii operací Zpět / Vpřed" - -msgid "" -"Clear Undo / Redo stack on new project or when an existing project is loaded." -msgstr "" -"Vymazat historii operací Zpět a Vpřed při otevírání či vytváření nového " -"projektu." - msgid "Click right mouse button to open/close History" msgstr "Stisk pravého tlačítka myši pro zobrazení/skrytí Historie" @@ -1337,8 +1738,7 @@ msgid "Click right mouse button to show arrangement options" msgstr "Kliknutím pravým tlačítkem myši zobrazíte možnosti uspořádání" msgid "Click the icon to change the object printable property" -msgstr "" -"Klepnutím na ikonu změníte příznak objektu, zda se bude tisknout či nikoliv" +msgstr "Klepnutím na ikonu změníte příznak objektu, zda se bude tisknout či nikoliv" msgid "Click the icon to change the object settings" msgstr "Pro změnu nastavení objektu klikněte na ikonu" @@ -1361,14 +1761,11 @@ msgstr "Řez rovinou" msgid "Close" msgstr "Zavřít" -msgid "Close holes" -msgstr "Uzavírání děr" - msgid "Closing distance" msgstr "Vzdálenost uzavření" -msgid "Closing radius" -msgstr "Poloměr uzavření" +msgid "Col/C" +msgstr "Col/C" msgid "Collapse sidebar" msgstr "Sbalit postranní panel" @@ -1379,6 +1776,9 @@ msgstr "Sbalit/Rozbalit postranní panel" msgid "Color" msgstr "Barva" +msgid "Color %1% at extruder %2%" +msgstr "Barva %1% na extrudéru %2%" + msgid "Color change" msgstr "Změna barvy" @@ -1388,21 +1788,27 @@ msgstr "Změna barvy (\"%1%\")" msgid "Color change (\"%1%\") for Extruder %2%" msgstr "Změna barvy (\"%1%\") pro Extruder %2%" -msgid "Color Change G-code" -msgstr "G-code pro změnu barvy" - msgid "Color change G-code" -msgstr "G-code pro změnu barvy" +msgstr "G-Code pro změnu barvy" msgid "Color changes" msgstr "Změny barev" +msgid "Color override" +msgstr "Přepsání barvy" + msgid "Color Print" msgstr "Barevný tisk" msgid "Colorprint height" msgstr "Výška barevného tisku" +msgid "Colors" +msgstr "Barvy" + +msgid "Colour Change G-code" +msgstr "Změna barvy G-kód" + msgid "Combine infill every" msgstr "Kombinovat výplň každou" @@ -1415,18 +1821,6 @@ msgstr "Příkazy" msgid "Comment:" msgstr "Komentář:" -msgid "Compare Presets" -msgstr "Porovnání přednastavení" - -msgid "Compare presets" -msgstr "Porovnání přednastavení" - -msgid "Compare this preset with some another" -msgstr "Porovnat toto přednastavení s jiným" - -msgid "Compared presets has different printer technology" -msgstr "Srovnávaná přednastavení mají odlišnou technologii tisku" - msgid "Compatible print profiles" msgstr "Kompatibilní tiskové profily" @@ -1442,9 +1836,6 @@ msgstr "Stav kompatibilních tiskáren" msgid "Complete individual objects" msgstr "Dokončení individuálních objektů" -msgid "COMPLETED" -msgstr "DOKONČENO" - msgid "Completed" msgstr "Dokončeno" @@ -1454,6 +1845,9 @@ msgstr "komprese se nezdařila" msgid "Concentric" msgstr "Koncentrický" +msgid "Concentric (filled)" +msgstr "Soustředný (vyplněný)" + msgid "Configuration &Assistant" msgstr "Průvodce n&astavením" @@ -1467,21 +1861,14 @@ msgid "" "Configuration bundle was loaded, however some configuration values were not " "recognized." msgstr "" -"Byl načten konfigurační balík, ale některé konfigurační hodnoty nebyly " -"rozpoznány." +"Byl načten konfigurační balík, ale některé konfigurační hodnoty nebyly rozpoznány." msgid "" "Configuration file \"%1%\" was loaded, however some configuration values " "were not recognized." msgstr "" -"Byl načten konfigurační soubor \"%1%\", ale některé konfigurační hodnoty " -"nebyly rozpoznány." - -msgid "Configuration is edited in ConfigWizard" -msgstr "Nastavení se upravuje v Průvodci konfigurace" - -msgid "Configuration is editing from ConfigWizard" -msgstr "Konfigurace se upravuje z nástroje Průvodce nastavením" +"Byl načten konfigurační soubor \"%1%\", ale některé konfigurační hodnoty nebyly " +"rozpoznány." msgid "Configuration notes" msgstr "Poznámky k nastavení" @@ -1501,33 +1888,92 @@ msgstr "Je k dispozici aktualizace konfigurace." msgid "Configuration updates" msgstr "Aktualizace nastavení" -msgid "" -"Configuration Updates causes a lost of preset modification.\n" -"So, check unsaved changes and save them if necessary." -msgstr "" -"Aktualizace konfigurace způsobí ztrátu změn v přednastaveních.\n" -"Zkontrolujte tedy neuložené změny a případně je uložte." - msgid "Configuration Wizard" msgstr "Průvodce nastavením" msgid "Confirmation" msgstr "Potvrzení" +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than infill_anchor_max is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to this parameter, but no longer than anchor_length_max. \n" +"Set this parameter to zero to disable anchoring perimeters connected to a " +"single infill line." +msgstr "" +"Připojte výplňovou čáru k vnitřnímu perimetru s krátkým segmentem dodatečný " +"perimetr. Pokud je vyjádřen v procentech (příklad: 15%), je to vypočteno přes šířku " +"vysunutí výplně. Slic3r se pokusí spojit dvě blízkovyplňte čáry do krátkého " +"obvodového segmentu. Pokud takový obvodový segment neexistuje je nalezen kratší než " +"infill_anchor_max, výplňový řádek je připojen k obvodový segment pouze na jedné " +"straně a délka obvodového segmentuVzaté je omezeno na tento parametr, ale ne déle " +"než anchor_length_max. \n" +"Nastavte tento parametr na nulu pro zakázání kotevních perimetrů připojených k " +"jediný výplňový řádek." + +msgid "" +"Connect an infill line to an internal perimeter with a short segment of an " +"additional perimeter. If expressed as percentage (example: 15%) it is " +"calculated over infill extrusion width. Slic3r tries to connect two close " +"infill lines to a short perimeter segment. If no such perimeter segment " +"shorter than this parameter is found, the infill line is connected to a " +"perimeter segment at just one side and the length of the perimeter segment " +"taken is limited to infill_anchor, but no longer than this parameter. \n" +"If set to 0, the old algorithm for infill connection will be used, it should " +"create the same result as with 1000 & 0." +msgstr "" +"Připojte výplňovou čáru k vnitřnímu perimetru s krátkým segmentem dodatečný " +"perimetr. Pokud je vyjádřen v procentech (příklad: 15%), je to vypočteno přes šířku " +"vysunutí výplně. Slic3r se pokusí spojit dvě blízkovyplňte čáry do krátkého " +"obvodového segmentu. Pokud takový obvodový segment neexistuje kratší než tento " +"parametr je nalezen, výplňový řádek je připojen k obvodový segment pouze na jedné " +"straně a délka obvodového segmentuTaken je omezen na infill_anchor, ale ne déle než " +"tento parametr. \n" +"Pokud je nastaveno na 0, použije se starý algoritmus pro připojení infill, měl " +"byvytvořit stejný výsledek jako s 1000 & 0." + +msgid "Connected" +msgstr "Připojeno" + +msgid "Connected to hole perimeters" +msgstr "Připojeno k perimetrům otvorů" + +msgid "Connected to outer perimeters" +msgstr "Připojeno k vnějším perimetrům" + +msgid "Connection length" +msgstr "Délka připojení" + +msgid "Connection of bottom infill lines" +msgstr "Připojení spodních výplňových linek" + +msgid "Connection of solid infill lines" +msgstr "Připojení plných výplňových linek" + +msgid "Connection of sparse infill lines" +msgstr "Spojení řídkých výplňových čar" + msgid "Connection of the support sticks and junctions" msgstr "Spojení podpůrných tyčí a spojek" +msgid "Connection of top infill lines" +msgstr "Připojení horních výplňových linek" + +msgid "Connection to %s works correctly." +msgstr "Připojení k %s funguje správně." + msgid "Connection to PrusaLink works correctly." msgstr "Připojení k PrusaLinku funguje správně." -msgid "Continue" -msgstr "Pokračovat" - -msgid "continue" -msgstr "pokračovat" +msgid "Contact distance on top of supports" +msgstr "Kontaktní vzdálenost na horní straně podpěr" -msgid "Continue and import newer configuration?" -msgstr "Pokračovat a importovat novější konfiguraci?" +msgid "Contact distance under the bottom of supports" +msgstr "Kontaktní vzdálenost pod spodní částí podpěr" msgid "Continue and install configuration updates?" msgstr "Pokračovat a instalovat aktualizace konfigurace?" @@ -1535,24 +1981,59 @@ msgstr "Pokračovat a instalovat aktualizace konfigurace?" msgid "Continue to activate a configuration snapshot %1%?" msgstr "Pokračovat v aktivaci zálohy konfigurace %1%?" +msgid "Continue with applying configuration changes?" +msgstr "Pokračovat v provádění změn konfigurace?" + +msgid "" +"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, " +"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik, Durand " +"Rémi and numerous others." +msgstr "" +"Příspěvky Henrika Brixe Andersena, Nicolase Dandrimonta, Marka Hindesse,Petr " +"Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtěch Bubník, DurandRémi a mnoho " +"dalších." + +msgid "" +"Contributions by Vojtech Bubnik, Enrico Turri, Durand Remi, Oleksandra " +"Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and " +"numerous others." +msgstr "" +"Příspěvky Vojtěcha Bubníka, Enrica Turriho, Duranda Remiho, OleksandryIushchenko, " +"Tamas Meszaros, Lukáš Matena, Vojtěch Král, David Kocik and řada dalších." + +msgid "Controls" +msgstr "Řízení" + msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" -"Řídí typ mostu mezi dvěma sousedními sloupky. Může být zig-zag, cross " -"(dvojitý zig-zag) nebo dynamic, který automaticky přepíná mezi prvními dvěma " -"v závislosti na vzdálenosti dvou sloupků." +"Řídí typ mostu mezi dvěma sousedními sloupky. Může být zig-zag, cross (dvojitý zig-" +"zag) nebo dynamic, který automaticky přepíná mezi prvními dvěma v závislosti na " +"vzdálenosti dvou sloupků." msgid "Convert from imperial units" msgstr "Převod z imperiálních jednotek" -msgid "Convert from meters" -msgstr "Převod z metrů" +msgid "Convert round holes to polyholes" +msgstr "Převést kulaté díry na mnohonásobné díry" + +msgid "Convert round vertical holes to polyholes" +msgstr "Převést kulaté svislé otvory na mnohonásobné otvory" msgid "Cooling" msgstr "Chlazení" +msgid "Cooling fan" +msgstr "Chladící Ventilator" + +msgid "Cooling moves are gradually accelerated towards this speed. " +msgstr "Chlazení se postupně zrychluje směrem k této rychlosti. " + +msgid "Cooling moves are gradually accelerated, starting at this speed. " +msgstr "Chlazení se postupně zrychluje, počínaje touto rychlostí. " + msgid "Cooling tube length" msgstr "Délka chladící trubičky" @@ -1584,15 +2065,15 @@ msgid "" "Copying of the temporary G-code has finished but the exported code couldn't " "be opened during copy check. The output G-code is at %1%.tmp." msgstr "" -"Kopírování dočasného G-codu bylo dokončeno, ale exportovaný G-code nemohl " -"být během kontroly kopírování otevřen. Výstupní G-cod je v %1%.tmp." +"Kopírování dočasného G-codu bylo dokončeno, ale exportovaný G-code nemohl být během " +"kontroly kopírování otevřen. Výstupní G-cod je v %1%.tmp." msgid "" "Copying of the temporary G-code has finished but the original code at %1% " "couldn't be opened during copy check. The output G-code is at %2%.tmp." msgstr "" -"Kopírování dočasného G-codu bylo dokončeno, ale původní G-code na %1% nemohl " -"být během kontroly kopírování otevřen. Výstupní G-code je v %2%.tmp." +"Kopírování dočasného G-codu bylo dokončeno, ale původní G-code na %1% nemohl být " +"během kontroly kopírování otevřen. Výstupní G-code je v %2%.tmp." msgid "Copying of the temporary G-code to the output G-code failed" msgstr "Kopírování dočasného G-codu do výstupního G-codu selhalo" @@ -1611,9 +2092,9 @@ msgid "" "problem with target device, please try exporting again or using different " "device. The corrupted output G-code is at %1%.tmp." msgstr "" -"Kopírování dočasného G-codu do výstupního G-codu se nezdařilo. Může to být " -"problém s cílovým zařízením. Zkuste exportovat znovu nebo použijte jiné " -"zařízení. Poškozený výstupní G-code je v %1%.tmp." +"Kopírování dočasného G-codu do výstupního G-codu se nezdařilo. Může to být problém " +"s cílovým zařízením. Zkuste exportovat znovu nebo použijte jiné zařízení. Poškozený " +"výstupní G-code je v %1%.tmp." msgid "Copyright" msgstr "Autorská práva" @@ -1621,15 +2102,6 @@ msgstr "Autorská práva" msgid "Correction for expansion" msgstr "Korekce expanze" -msgid "Correction for expansion in X axis" -msgstr "Korekce roztažnosti v ose X" - -msgid "Correction for expansion in Y axis" -msgstr "Korekce roztažnosti v ose Y" - -msgid "Correction for expansion in Z axis" -msgstr "Korekce roztažnosti v ose Z" - msgid "Corrections" msgstr "Korekce" @@ -1639,15 +2111,43 @@ msgstr "Náklady" msgid "Cost (money)" msgstr "Cena (peníze)" +msgid "" +"Cost of moving the extruder. The highest penalty is when the point is the " +"furthest from the position of the extruder before extruding the external " +"perimeter" +msgstr "" +"Náklady na přesun extruderu. Nejvyšší pokuta je, když je bod nejdále od pozice " +"extruderu před vytlačením vnějšího perimetru" + +msgid "" +"Cost of placing the seam at a bad angle. The worst angle (max penalty) is " +"when it's flat." +msgstr "" +"Náklady na umístění švu ve špatném úhlu. Nejhorší úhel (Max penalizace) je když je " +"to ploché." + +msgid "Cost-based" +msgstr "Na základě nákladů" + msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "Objekty nelze uspořádat! Některé geometrie mohou být neplatné." +msgid "Could not connect to %s" +msgstr "Nelze se připojit k %s" + msgid "Could not connect to Prusa SLA" msgstr "Nelze se připojit k Prusa SLA" msgid "Could not connect to PrusaLink" msgstr "Nelze se připojit k PrusaLinku" +msgid "" +"Could not detect system SSL certificate store. The slicer will be unable to " +"establish secure network connections." +msgstr "" +"Nelze zjistit systémové úložiště certifikátů SSL. Průřez nebude schopen nastavte " +"zabezpečená síťová připojení." + msgid "Could not get a valid Printer Host reference" msgstr "Nelze získat platný odkaz na tiskový server" @@ -1657,33 +2157,41 @@ msgstr "Nelze získat prostředky pro vytvoření nového spojení" msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" -"Zakrýt smyčkami horní kontaktní vrstvu podpěr. Ve výchozím nastavení " -"zakázáno." +"Zakrýt smyčkami horní kontaktní vrstvu podpěr. Ve výchozím nastavení zakázáno." + +msgid "CRC-32 check failed" +msgstr "CRC-32 kontrola selhala" + +msgid "Create a test print to help you to level your printer bed." +msgstr "Vytvořte zkušební tisk, který vám pomůže vyrovnat postel tiskárny." + +msgid "Create a test print to help you to set your bridge flow ratio." +msgstr "Vytvořte zkušební tisk, který vám pomůže nastavit poměr průtoku mostu." msgid "" -"Cracks smaller than 2x gap closing radius are being filled during the " -"triangle mesh slicing. The gap closing operation may reduce the final print " -"resolution, therefore it is advisable to keep the value reasonably low." +"Create a test print to help you to set your filament extrusion multiplier." msgstr "" -"Praskliny menší než 2x poloměr uzavření mezery se vyplní během slicování " -"trojúhelníkových sítí. Operace uzavírání mezery může snížit konečné " -"rozlišení tisku, proto je vhodné udržovat rozumně nízkou hodnotu." +"Vytvořte zkušební tisk, který vám pomůže nastavit multiplikátor vytlačování " +"filamentu." -msgid "CRC-32 check failed" -msgstr "CRC-32 kontrola selhala" +msgid "Create a test print to help you to set your filament temperature." +msgstr "Vytvořte zkušební tisk, který vám pomůže nastavit teplotu vlákna." -msgid "Create pad around object and ignore the support elevation" +msgid "" +"Create a test print to help you to set your over-bridge flow ratio and " +"ironing pattern." msgstr "" -"Vytvoří podložku kolem objektu a ignorujte nadzvednutí objektu podpěrami" +"Vytvořte zkušební tisk, který vám pomůže nastavit poměr přemostění průtoku a vzor " +"na ironing." -msgid "Creating a new project" -msgstr "Vytváření nového projektu" +msgid "Create a test print to help you to set your retraction length." +msgstr "Vytvořte zkušební tisk, který vám pomůže nastavit délku zatažení." -msgid "Creating a new project while some presets are modified." -msgstr "Vytváření nového projektu. Některá přednastavení jsou upravená." +msgid "Create an object by writing little easy script." +msgstr "Vytvořte objekt napsáním malého jednoduchého skriptu." -msgid "Creating a new project while the current project is modified." -msgstr "Vytvoření nového projektu. Současný projekt byl změněn." +msgid "Create pad around object and ignore the support elevation" +msgstr "Vytvoří podložku kolem objektu a ignorujte nadzvednutí objektu podpěrami" msgid "Critical angle" msgstr "Kritický úhel" @@ -1700,6 +2208,16 @@ msgstr "Ctrl + kolečko myši" msgid "Cubic" msgstr "Kubický" +msgid "" +"CURL init has failed. The slicer will be unable to establish network " +"connections. See logs for additional details." +msgstr "" +"Inicializace CURL selhala. Slicer nebude schopen vytvořit síťpřipojení. Další " +"podrobnosti naleznete v protokolech." + +msgid "Current mode is %s" +msgstr "Aktuální režim je %s" + msgid "Current preset is inherited from" msgstr "Aktuální nastavení je zděděné od" @@ -1709,6 +2227,21 @@ msgstr "Aktuální nastavení je zděděno z výchozího nastavení." msgid "Current version:" msgstr "Aktuální verze:" +msgid "Curve smoothing" +msgstr "Vyhlazení křivek" + +msgid "Curve smoothing cutoff dist" +msgstr "Mezní vzdálenost vyhlazení křivky" + +msgid "Curve smoothing minimum angle (concave)" +msgstr "Minimální úhel vyhlazování křivky (konkávní)" + +msgid "Curve smoothing minimum angle (convex)" +msgstr "Minimální úhel vyhlazování křivky (konvexní)" + +msgid "Curve smoothing precision" +msgstr "Přesnost vyhlazování křivek" + msgid "Custom" msgstr "Vlastní" @@ -1717,9 +2250,11 @@ msgid "" "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" -"Pro HTTPS připojení OctoPrintu lze zadat vlastní CA certifikát ve formátu " -"crt/pem. Pokud zůstane pole prázdné, použije se výchozí úložiště certifikátů " -"OS CA." +"Pro HTTPS připojení OctoPrintu lze zadat vlastní CA certifikát ve formátu crt/pem. " +"Pokud zůstane pole prázdné, použije se výchozí úložiště certifikátů OS CA." + +msgid "Custom Filament variables" +msgstr "Vlastní proměnné vlákna" msgid "Custom G-code" msgstr "Vlastní G-code" @@ -1730,28 +2265,30 @@ msgstr "Vlastní G-code v současné vrstvě (%1% mm)." msgid "Custom G-codes" msgstr "Vlastní G-cody" +msgid "Custom Print variables" +msgstr "Vlastní tiskové proměnné" + msgid "Custom Printer" msgstr "Vlastní tiskárna" msgid "Custom Printer Setup" msgstr "Vlastní nastavení tiskárny" -msgid "Custom printer was installed and it will be activated." -msgstr "Vlastní tiskárna byla nainstalována a bude aktivována." +msgid "Custom Printer variables" +msgstr "Vlastní proměnné tiskárny" msgid "Custom profile name:" msgstr "Vlastní název profilu:" -msgid "" -"Custom supports, seams and multimaterial painting were removed after " -"repairing the mesh." -msgstr "" -"Po opravě modelu byly odstraněny vlastní podpěry, švy a multimateriálové " -"malování." +msgid "Custom supports and seams were removed after repairing the mesh." +msgstr "Po opravě modelu byly odstraněny vlastní podpěry a švy." msgid "Custom template (\"%1%\")" msgstr "Vlastní šablona (\"%1%\")" +msgid "Custom variables" +msgstr "Vlastní proměnné" + msgid "Cut" msgstr "Řezat" @@ -1761,11 +2298,23 @@ msgstr "Řez Rovinou" msgid "Cut model at the given Z." msgstr "Rozříznout model v dané výšce Z." -msgid "D&eselect All" -msgstr "Odznačit Vš&e" +msgid "cutoff" +msgstr "Odříznout" -msgid "Dark mode (experimental)" -msgstr "Tmavý režim (experimentální)" +msgid "Cutting corners" +msgstr "Řezání rohů" + +msgid "Cylinder" +msgstr "Válec" + +msgid "D&eselect all" +msgstr "Odznačit vš&e" + +msgid "Dark color, in the RGB hex format." +msgstr "Tmavá barva, v hexadecimálním formátu RGB." + +msgid "Dark gui color" +msgstr "Tmavá barva gui" msgid "Data directory" msgstr "Složka Data" @@ -1780,19 +2329,22 @@ msgid "Decrease Instances" msgstr "Odebrání Instancí" msgid "default" -msgstr "výchozí" +msgstr "Výchozí" msgid "Default" msgstr "Výchozí" +msgid "Default acceleration" +msgstr "Výchozí zrychlení" + msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" -"Výchozí úhel pro orientaci výplně. Bude pro něj použito křížové šrafování. " -"Mosty budou vyplněny nejlepším směrem, který Slic3r dokáže rozpoznat, takže " -"toto nastavení je neovlivní." +"Výchozí úhel pro orientaci výplně. Bude pro něj použito křížové šrafování. Mosty " +"budou vyplněny nejlepším směrem, který Slic3r dokáže rozpoznat, takže toto " +"nastavení je neovlivní." msgid "Default color" msgstr "Výchozí barva" @@ -1800,9 +2352,25 @@ msgstr "Výchozí barva" msgid "default color" msgstr "výchozí barva" +msgid "Default distance between objects" +msgstr "Výchozí vzdálenost mezi objekty" + +msgid "" +"Default distance used for the auto-arrange feature of the platter.\n" +"Set to 0 to use the last value instead." +msgstr "" +"Výchozí vzdálenost použitá pro funkci automatického uspořádání talíře.\n" +"Nastavte na 0, chcete-li místo toho použít poslední hodnotu." + +msgid "Default extrusion spacing" +msgstr "Výchozí rozestup vysunutí" + msgid "Default extrusion width" msgstr "Výchozí šířka extruze" +msgid "Default fan speed" +msgstr "Výchozí rychlost ventilátoru" + msgid "default filament profile" msgstr "výchozí profil filamentu" @@ -1814,8 +2382,14 @@ msgid "" "selection of the current printer profile, this filament profile will be " "activated." msgstr "" -"Výchozí materiálový profil spojený se současným profilem tiskárny. Při " -"výběru současného profilu tiskárny se aktivuje tento materiálový profil." +"Výchozí materiálový profil spojený se současným profilem tiskárny. Při výběru " +"současného profilu tiskárny se aktivuje tento materiálový profil." + +msgid "Default first layer speed" +msgstr "Výchozí rychlost první vrstvy" + +msgid "Default infill margin" +msgstr "Výchozí okraj výplně" msgid "default print profile" msgstr "výchozí tiskový profil" @@ -1846,6 +2420,20 @@ msgstr "výchozí hodnota" msgid "Define a custom printer profile" msgstr "Vytvořit vlastní tiskový profil" +msgid "" +"Defines the pad cavity depth. Set zero to disable the cavity. Be careful " +"when enabling this feature, as some resins may produce an extreme suction " +"effect inside the cavity, which makes peeling the print off the vat foil " +"difficult." +msgstr "" +"Definuje hloubku dutiny podložky. Pro deaktivaci dutiny nastavte nulu. Buďte " +"opatrní.při povolení této funkce, protože některé pryskyřice mohou produkovat " +"extrémní sáníefekt uvnitř dutiny, který umožňuje odlupování tisku z vanové " +"fólieobtížný." + +msgid "degenerate facets" +msgstr "degenerace facetů" + msgid "Delay after unloading" msgstr "Zpoždění po vyjmutí" @@ -1855,8 +2443,8 @@ msgstr "Smazat" msgid "delete" msgstr "smazat" -msgid "Delete &All" -msgstr "Sm&azat Vše" +msgid "Delete &all" +msgstr "Sm&azat vše" msgid "Delete all" msgstr "Smazat vše" @@ -1864,9 +2452,6 @@ msgstr "Smazat vše" msgid "Delete All Instances from Object" msgstr "Smazat všechny instance objektu" -msgid "Delete All Objects" -msgstr "Smazat všechny objekty" - msgid "Delete color change" msgstr "Smazat změnu barvy" @@ -1939,18 +2524,27 @@ msgstr "Smazat všechny objekty" msgid "Deletes the current selection" msgstr "Smaže aktuální výběr" +msgid "Dense infill algorithm" +msgstr "Algoritmus husté výplně" + +msgid "Dense infill layer" +msgstr "Hustá výplňová vrstva" + msgid "Density" msgstr "Hustota" msgid "Density of internal infill, expressed in the range 0% - 100%." -msgstr "Hustota vnitřní výplně vyjádřená v rozmezí 0 až 100 %." - -msgid "Density of the first raft or support layer." -msgstr "Hustota prvního vrstvy raftu nebo podpěrné vrstvy." +msgstr "Hustota vnitřní výplně, vyjádřená v rozmezí 0% - 100%." msgid "Dependencies" msgstr "Závislosti" +msgid "Dere." +msgstr "Deretractrkce." + +msgid "Deretraction" +msgstr "Deretractrkce" + msgid "Deretraction Speed" msgstr "Rychlost deretrakce" @@ -1969,15 +2563,6 @@ msgstr "Odznačit obdélníkovým výběrem myši" msgid "Deselects all objects" msgstr "Odznačit všechny objekty" -msgid "Desktop Integration" -msgstr "Integrace do systému" - -msgid "Desktop integration failed." -msgstr "Integrace do systému selhala." - -msgid "Desktop integration was successful." -msgstr "Integrace do systému proběhla úspěšně." - msgid "Detach from system preset" msgstr "Oddělit od systémového přednastavení" @@ -1988,18 +2573,37 @@ msgid "Detached" msgstr "Odpojeno" msgid "" -"Detect unconnected parts in the given model(s) and split them into separate " -"objects." +"Detect single-width walls (parts where two extrusions don't fit and we need " +"to collapse them into a single trace). If unchecked, Slic3r may try to fit " +"perimeters where it's not possible, creating some overlap leading to over-" +"extrusion." msgstr "" -"Rozpoznat nepřipojené části daného modelu(ů) a rozdělit je do samostatných " -"objektů." +"Detekujte stěny o jedné šířce (části, kde se dva výlisky nevejdou a my potřebujeme " +"sbalit je do jediné stopy). Pokud není zaškrtnuto, Slic3r se může pokusit " +"přizpůsobit perimetry, kde to není možné, vytváří se určité překrytí vedoucí k pře-" +"extruze." + +msgid "" +"Detect unconnected parts in the given model(s) and split them into separate " +"objects." +msgstr "" +"Rozpoznat nepřipojené části daného modelu(ů) a rozdělit je do samostatných objektů." msgid "Detected advanced data" msgstr "Byla detekována data z pokročilého režimu" +msgid "Detection radius" +msgstr "Detekční rádius" + +msgid "Determines whether toolchange temperatures will be applied" +msgstr "Určuje, zda budou použity teploty pro výměnu nástrojů" + msgid "Device:" msgstr "Zařízení:" +msgid "Dialogs" +msgstr "Dialogy" + msgid "Diameter" msgstr "Průměr" @@ -2015,17 +2619,22 @@ msgstr "Průměr konce podpůrného hrotu" msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." -msgstr "" -"Průměr tiskové podložky. Přepokládaný počátek (0,0) je umístěn uprostřed." +msgstr "Průměr tiskové podložky. Předpokládaný počátek (0,0) je umístěn uprostřed." -msgid "differs from the original file" -msgstr "liší se od původního souboru" +msgid "Dimension:" +msgstr "Rozměr:" + +msgid "Dimensional accuracy (default)" +msgstr "Rozměrová přesnost (výchozí)" msgid "Direction" msgstr "Směr" -msgid "Disable \"%1%\"" -msgstr "Zakázat \"%1%\"" +msgid "Disable" +msgstr "Zakázat" + +msgid "Disable 'Avoid crossing perimeters' for the first layer." +msgstr "U první vrstvy deaktivujte 'Vyvarujte se překračování perimetrů'." msgid "Disable fan for the first" msgstr "Vypnutí chlazení pro prvních" @@ -2033,6 +2642,13 @@ msgstr "Vypnutí chlazení pro prvních" msgid "Disabled" msgstr "Zakázáno" +msgid "" +"Disables retraction when the travel path does not exceed the upper layer's " +"perimeters (and thus any ooze will probably be invisible)." +msgstr "" +"Deaktivuje zatažení, když dráha jízdy nepřesahuje horní vrstvu perimetry (a tudíž " +"jakýkoli sliz bude pravděpodobně neviditelný)." + msgid "Discard" msgstr "Zahodit" @@ -2051,9 +2667,15 @@ msgstr "Výška displeje" msgid "Display horizontal mirroring" msgstr "Horizontální zrcadlení displeje" +msgid "Display mirroring" +msgstr "Zrcadlení displeje" + msgid "Display orientation" msgstr "Orientace displeje" +msgid "Display setting icons" +msgstr "Ikony nastavení zobrazení" + msgid "Display the Print Host Upload Queue window" msgstr "Zobrazit okno s frontou nahrávání do tiskového serveru" @@ -2063,14 +2685,35 @@ msgstr "Vertikální zrcadlení displeje" msgid "Display width" msgstr "Šířka displeje" +msgid "Distance" +msgstr "Vzdálenost" + msgid "Distance between ironing lines" -msgstr "Vzdálenost mezi žehlicími tahy" +msgstr "Vzdálenost mezi ironing tahy" + +msgid "" +"Distance between skirt and object(s). Set zero to attach the skirt to the " +"object(s) and get a brim for better adhesion." +msgstr "" +"Vzdálenost mezi sukní a předmětem(y). Nastavte nulu pro připojení sukně k " +"předmět(y) a získat okraj pro lepší přilnavost." + +msgid "" +"Distance between the brim and the part. Should be kept at 0 unless you " +"encounter great difficulties to separate them. It's subtracted to brim_width " +"and brim_width_interior, so it has to be lower than them" +msgstr "" +"Vzdálenost mezi okrajem a částí. Měla by být udržována na 0, pokud čelit velkým " +"potížím při jejich oddělení. Odečítá se to od šířky okrajea brim_width_interior, " +"takže musí být nižší než oni" msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." -msgstr "" -"Rozteč mezi dvěmi spojkami, které spojují objekt s vygenerovanou podložkou." +msgstr "Rozteč mezi dvěma spojkami, které spojují objekt s vygenerovanou podložkou." + +msgid "Distance from object" +msgstr "Vzdálenost od objektu" msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " @@ -2084,11 +2727,11 @@ msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware. " msgstr "" -"Vzdálenost špičky extruderu od místa, kde je zaparkován filament při " -"vytažení. Měla by se shodovat s hodnotou ve firmware tiskárny. " +"Vzdálenost špičky extruderu od místa, kde je zaparkován filament při vytažení. Měla " +"by se shodovat s hodnotou ve firmware tiskárny. " -msgid "Divide by zero" -msgstr "Dělení nulou" +msgid "Distribution" +msgstr "Rozdělení" msgid "Do not fail if a file supplied to --load does not exist." msgstr "Nepodaří se, pokud neexistuje soubor dodaný k přepínači --load." @@ -2109,20 +2752,14 @@ msgstr "" "Vyberte ANO, pokud chcete změnit tuto hodnotu na %s%%,\n" "nebo NE, pokud jste si jisti, že %s %s je správná hodnota." -msgid "Do you want to continue changing the configuration?" -msgstr "Chcete pokračovat v provádění změn konfigurace?" - msgid "Do you want to delete all saved tool changes?" msgstr "Opravdu chcete odstranit všechny uložené změny nástrojů?" msgid "Do you want to proceed?" msgstr "Chcete pokračovat?" -msgid "Do you want to replace it" -msgstr "Chcete udělat náhradu" - -msgid "Do you want to save the changes to \"%1%\"?" -msgstr "Chcete uložit změny do \"%1%\"?" +msgid "Do you want to retry" +msgstr "Chcete to zkusit znovu" msgid "Do you want to save your manually edited support points?" msgstr "Chcete uložit ručně upravené podpěrné body?" @@ -2139,8 +2776,8 @@ msgstr "neobsahuje platný G-code." msgid "Don't arrange" msgstr "Neuspořádávat" -msgid "Don't import" -msgstr "Neimportovat" +msgid "Don't avoid crossing on 1st layer" +msgstr "Nevyhýbejte se křížení v 1. vrstvě" msgid "Don't install" msgstr "Neinstalovat" @@ -2148,15 +2785,22 @@ msgstr "Neinstalovat" msgid "Don't notify about new releases any more" msgstr "Neupozorňovat na nové verze" -msgid "Don't save" -msgstr "Neukládat" - msgid "Don't show again" msgstr "Znovu nezobrazovat" msgid "Don't support bridges" msgstr "Nevytvářet podpěry pod mosty" +msgid "Don't switch" +msgstr "Neprepinejte" + +msgid "" +"Don't wipe when you don't cross a perimeter. Need " +"'only_retract_when_crossing_perimeters'and 'wipe' enabled." +msgstr "" +"Neutírejte, když nepřekročíte perimetr. " +"Potřebujte'only_retract_when_crossing_perimeters'a 'wipe' povoleno." + msgid "Downgrade" msgstr "Downgrade" @@ -2176,8 +2820,8 @@ msgid "" "Drilling holes into the mesh failed. This is usually caused by broken model. " "Try to fix it first." msgstr "" -"Vrtání otvorů do meshe selhalo. Je to obvykle způsobené poškozeným modelem. " -"Zkuste ho nejprve opravit." +"Vrtání otvorů do meshe selhalo. Je to obvykle způsobené poškozeným modelem. Zkuste " +"ho nejprve opravit." msgid "Drop to bed" msgstr "Spadnout na podložku" @@ -2197,21 +2841,26 @@ msgstr "Dynamic" msgid "E&xport" msgstr "E&xportovat" -msgid "Edit" -msgstr "Upravit" +msgid "Each militer add this value to the retraction value." +msgstr "Každý militr přičte tuto hodnotu k hodnotě zatažení." + +msgid "Ear pattern" +msgstr "Ušní vzor" + +msgid "edges fixed" +msgstr "hrany opraveny" msgid "Edit color" msgstr "Upravit barvu" msgid "Edit current color - Right click the colored slider segment" -msgstr "" -"Upravit aktuální barvu - Klik pravým tlačítkem na barevný segment posuvníku" +msgstr "Upravit aktuální barvu - Klik pravým tlačítkem na barevný segment posuvníku" msgid "Edit custom G-code" msgstr "Upravit vlastní G-code" msgid "Edit Height Range" -msgstr "Úprava Rozsahu vrstev" +msgstr "Úprava Rozsahu Vrstev" msgid "Edit pause print message" msgstr "Upravit zprávu při pozastavení tisku" @@ -2231,10 +2880,7 @@ msgstr "Upravit značku - Pravé tlačítko myši" msgid "Editing" msgstr "Editace" -msgid "Eigen vectorization supported:" -msgstr "Podporovaná vlastní vektorizace:" - -msgid "Ejec&t SD Card / Flash Drive" +msgid "Ejec&t SD card / Flash drive" msgstr "Vysunou&t SD kartu / Flash disk" msgid "Eject drive" @@ -2253,24 +2899,41 @@ msgid "" "Elevation is too low for object. Use the \"Pad around object\" feature to " "print the object without elevation." msgstr "" -"Nadzvednutí objektu je příliš malé. Pomocí funkce „Podložka okolo objektu“ " -"můžete objekt vytisknout bez nadzvednutí nad podložku." +"Nadzvednutí objektu je příliš malé. Pomocí funkce „Podložka okolo objektu“ můžete " +"objekt vytisknout bez nadzvednutí nad podložku." -msgid "Empty layer between %1% and %2%." -msgstr "Prázdná vrstva mezi %1% a %2%." +msgid "" +"Emit something at 1 minute intervals into the G-code to let the firmware " +"show accurate remaining time." +msgstr "" +"Vysílejte něco v 1 minutových intervalech do G-kódu, abyste nechali " +"firmwarezobrazit přesný zbývající čas." + +msgid "Empty layers detected, the output would not be printable." +msgstr "Byly detekovány prázdné vrstvy, model by nebylo možné vytisknout." msgid "Enable" msgstr "Zapnout" +msgid "Enable advanced wiping volume" +msgstr "Povolit pokročilou hlasitost stírání" + msgid "Enable auto cooling" msgstr "Zapnutí automatického chlazení" -msgid "Enable dark mode" -msgstr "Aktivace tmavého režimu" - msgid "Enable fan if layer print time is below" msgstr "Zapnout ventilátor, pokud je doba tisku vrstvy kratší než" +msgid "Enable Gap fill" +msgstr "Povolit výplň tenkých stěn" + +msgid "" +"Enable gap fill algorithm. It will extrude small lines between perimeters " +"when there is not enough space for another perimeter or an infill." +msgstr "" +"Povolit algoritmus vyplňování tenkých stěn. Mezi perimetry vytlačí malé čárykdyž není " +"dostatek místa pro další perimetr nebo výplň." + msgid "Enable hollowing" msgstr "Povolit tvorbu dutin" @@ -2278,48 +2941,46 @@ msgid "Enable horizontal mirroring of output images" msgstr "Zapne horizontální zrcadlení výstupních obrázků" msgid "Enable ironing" -msgstr "Zapnout ironing" +msgstr "Zapnout Ironing" msgid "" "Enable ironing of the top layers with the hot print head for smooth surface" msgstr "Pro hladké vrchní vrstvy povolte ironing pomocí ohřáté tiskové hlavy" -msgid "" -"Enable reading unknown configuration values by silently substituting them " -"with defaults." -msgstr "" -"Umožňuje načítání neznámých konfiguračních hodnot jejich tichým nahrazením " -"výchozími hodnotami." - -msgid "" -"Enable reading unknown configuration values by verbosely substituting them " -"with defaults." -msgstr "" -"Umožňuje načítání neznámých konfiguračních hodnot jejich výslovným " -"nahrazením výchozími hodnotami." +msgid "Enable ironing post-process" +msgstr "Zapnout ironing následný proces" msgid "Enable rotations (slow)" msgstr "Povolit rotace (pomalé)" +msgid "Enable Skinnydip string reduction" +msgstr "Povolit redukci řetězce Skinnydip" + msgid "Enable support for legacy 3DConnexion devices" -msgstr "Povolit podporu pro starší zařízení 3DConnexion" +msgstr "Povolit podporu pro starší zařízení 3D Připojení" msgid "Enable support material generation." msgstr "Zapne generování podpěr." -msgid "Enable supports for enforcers only" -msgstr "Povolení pouze vynucených podpěr" - msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" -"Zapněte tuto možnost, chcete-li do G-Code přidávat komentáře, které budou " -"určovat, příslušnost tiskových pohybů k jednotlivým objektům. To je užitečné " -"pro Octoprint plugin CancelObject. Nastavení NENÍ kompatibilní se Single " -"Extruder Multi Material konfigurací a s čištěním trysky do objektu / výplně." +"Zapněte tuto možnost, chcete-li do G-Code přidávat komentáře, které budou určovat, " +"příslušnost tiskových pohybů k jednotlivým objektům. To je užitečné pro Octoprint " +"plugin CancelObject. Nastavení NENÍ kompatibilní se Single Extruder Multi Material " +"konfigurací a s čištěním trysky do objektu / výplně." + +msgid "" +"Enable this to get a commented G-code file, with each line explained by " +"descriptive text. If you print from an SD card, the additional weight of the " +"file could make your firmware slow down." +msgstr "" +"Povolením této možnosti získáte soubor s komentářem G-kódu, přičemž každý řádek " +"bude vysvětlen popisný text. Pokud tisknete z karty SD, další hmotnost soubor by " +"mohl zpomalit firmware." msgid "Enable variable layer height feature" msgstr "Zapnout variabilní výšku vrstev" @@ -2327,8 +2988,17 @@ msgstr "Zapnout variabilní výšku vrstev" msgid "Enable vertical mirroring of output images" msgstr "Zapne vertikální zrcadlení výstupních obrázků" -msgid "Enabled" -msgstr "Povoleno" +msgid "Enable wipe tower" +msgstr "Povolit stírací věž" + +msgid "" +"Enables the creation of a support layer under the first solid layer. This " +"allows you to use a lower infill ratio without compromising the top quality. " +"The dense infill is laid out with a 50% infill density." +msgstr "" +"Umožňuje vytvoření podpůrné vrstvy pod první plnou vrstvou. Umožňuje používat nižší " +"poměr výplně, aniž by byla ohrožena špičková kvalita. Hustá výplň je položena s " +"50% hustotou výplně." msgid "End G-code" msgstr "Konec G-code" @@ -2336,6 +3006,22 @@ msgstr "Konec G-code" msgid "Enforce" msgstr "Vynutit" +msgid "Enforce 100% fill volume" +msgstr "Vynutit 100% objem výplně" + +msgid "" +"Enforce a specific color on thumbnails. If not enforced, their color will be " +"the one defined by the filament." +msgstr "" +"Vynutit konkrétní barvu na miniaturách. Pokud nebude vynucena, jejich barva bude " +"ten definovaný vláknem." + +msgid "Enforce lift on first layer" +msgstr "Vynutit zvednutí na první vrstvě" + +msgid "Enforce on first layer" +msgstr "Vynutit na první vrstvě" + msgid "Enforce seam" msgstr "Vynucení švu" @@ -2348,11 +3034,20 @@ msgstr "Vynutit podpěry pro prvních n vrstev" msgid "Enforce supports" msgstr "Vynucení podpěr" +msgid "Enforce thumbnail color" +msgstr "Vynutit barvu miniatur" + msgid "Enqueued" msgstr "Zařazeno do fronty" -msgid "Ensure on bed" -msgstr "Zajistit položení na podložku" +msgid "" +"Ensure that the slicer won't add heating, fan, extruder... commands before " +"or just after your start-gcode.If set to true, you have to write a good and " +"complete start_gcode, as no checks are made anymore." +msgstr "" +"Ujistěte se, že slicer nepřidá příkazy ohřevu, ventilátoru, extrudéru... dřívenebo " +"těsně za vaším start-gcode. Pokud je nastaveno na true, musíte napsat dobrý a " +"dokončete start_gcode, protože se již neprovádějí žádné kontroly." msgid "Ensure vertical shell thickness" msgstr "Zajistit tloušťku svislých stěn" @@ -2363,19 +3058,35 @@ msgstr "Zadejte hledaný výraz" msgid "Enter custom G-code used on current layer" msgstr "Vložte vlastní G-code použitý v této vrstvě" +msgid "" +"Enter here the gcode to end the toolhead action, like stopping the spindle. " +"You have access to {next_extruder} and {previous_extruder}. " +"previous_extruder is the 'extruder number' of the current milling tool, it's " +"equal to the index (begining at 0) of the milling tool plus the number of " +"extruders. next_extruder is the 'extruder number' of the next tool, it may " +"be a normal extruder, if it's below the number of extruders. The number of " +"extruder is available at {extruder}and the number of milling tool is " +"available at {milling_cutter}." +msgstr "" +"Sem zadejte gkód pro ukončení činnosti nástrojové hlavy, jako je zastavení vřetena." +"Máte přístup k {next extruder} a {previou extruder}.předchozí extruder je číslo " +"extrudéru aktuálního frézovacího nástroje, je torovná se indexu (začínající 0) " +"frézovacího nástroje plus číslo extruders. next extruder je 'číslo extrudéru' " +"dalšího nástroje, může buďte normálním extruderem, pokud je nižší než počet " +"extruderů. Počet extruder je dostupný na {extruder} a počet frézovacích nástrojů je " +"k dispozici na {milling_cutter}." + msgid "Enter new name" msgstr "Zadejte nový název" msgid "Enter short message shown on Printer display when a print is paused" msgstr "" -"Zadejte krátkou zprávu, která se zobrazí na displeji tiskárny při " -"pozastavení tisku" +"Zadejte krátkou zprávu, která se zobrazí na displeji tiskárny při pozastavení tisku" msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." -msgstr "" -"Zadejte požadovanou teplotu filamentu, aby se spojil s vyhřívanou podložkou." +msgstr "Zadejte požadovanou teplotu filamentu, aby se spojil s vyhřívanou podložkou." msgid "Enter the diameter of your filament." msgstr "Zadejte průměr vašeho filamentu." @@ -2392,6 +3103,19 @@ msgstr "Zadejte pohyb v rámci vrstvy, na který chcete přejít" msgid "Enter the number of copies:" msgstr "Zadejte počet kopií:" +msgid "" +"Enter the shrinkage percentage that the filament will get after cooling " +"(94% if you measure 94mm instead of 100mm). The part will be scaled in xy to " +"compensate. Only the filament used for the perimeter is taken into account.\n" +"Be sure to allow enough space between objects, as this compensation is done " +"after the checks." +msgstr "" +"Zadejte procento smrštění, které vlákno získá po ochlazení(94 %, pokud naměříte 94 " +"mm místo 100 mm). Součást bude zmenšena v xy na kompenzovat. Zohledňuje se pouze " +"vlákno použité pro perimetr.\n" +"Ujistěte se, že je mezi objekty dostatek prostoru, protože tato kompenzace se " +"provádí po kontrolách." + msgid "Enter the temperature needed for extruding your filament." msgstr "Zadejte požadovanou teplotu pro extruzi vašeho filamentu." @@ -2404,13 +3128,12 @@ msgstr "" "Zadejte hmotnost prázdné cívky. Díky tomu budete moci určit, zda máte na " "cívce dostatečné množství filamentu pro dokončení tisku. Zvážíte cívku s " "částečně spotřebovaným filamentem a hodnotu porovnáte s vypočtenou hmotností " -"vypočítanou PrusaSlicerem." +"vypočítanou SuperSlicerem." msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." -msgstr "" -"Zde zadejte cenu filamentu za kg. Slouží pouze pro statistické informace." +msgstr "Zde zadejte cenu filamentu za kg. Slouží pouze pro statistické informace." msgid "" "Enter your filament density here. This is only for statistical information. " @@ -2418,9 +3141,9 @@ msgid "" "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" -"Zde zadejte hustotu filamentu. Toto je pouze pro statistické informace. " -"Přípustný způsob je zvážit známou délku filamentu a vypočítat poměr délky k " -"objemu. Je lepší vypočítat objem přímo přes posun." +"Zde zadejte hustotu filamentu. Toto je pouze pro statistické informace. Přípustný " +"způsob je zvážit známou délku filamentu a vypočítat poměr délky k objemu. Je lepší " +"vypočítat objem přímo přes posun." msgid "" "Enter your filament diameter here. Good precision is required, so use a " @@ -2430,6 +3153,12 @@ msgstr "" "Zde zadejte průměr filamentu. Je zapotřebí správné přesnosti, proto použijte " "šupleru a proveďte několik měření podél filamentu, poté vypočtete průměr." +msgid "Entering Paint-on supports" +msgstr "Vstup do Malování podpěr" + +msgid "Entering Seam painting" +msgstr "Vstup do Malování švu" + msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" @@ -2442,17 +3171,17 @@ msgstr "" msgid "Error" msgstr "Chyba" -msgid "ERROR" -msgstr "CHYBA" - msgid "Error accessing port at %s: %s" msgstr "Chyba při přístupu k portu na %s : %s" msgid "Error during reload" msgstr "Chyba při opětovném načtení souboru" -msgid "Error during replace" -msgstr "Chyba při nahrazení" +msgid "Error exporting 3MF file %s" +msgstr "Chyba při exportu souboru 3MF %s" + +msgid "Error exporting AMF file %s" +msgstr "Chyba při exportu souboru AMF %s" msgid "Error loading shaders" msgstr "Chyba při načítání shaderů" @@ -2460,6 +3189,22 @@ msgstr "Chyba při načítání shaderů" msgid "Error Message" msgstr "Chybová hláška" +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error." +msgstr "" +"Chyba při analýze konfiguračního souboru %1%, pravděpodobně je poškozen. Zkuste " +"ručně smažte soubor, abyste se zotavili z chyby." + +msgid "" +"Error parsing %1% config file, it is probably corrupted. Try to manually " +"delete the file to recover from the error. Your user profiles will not be " +"affected." +msgstr "" +"Chyba při analýze konfiguračního souboru %1%, pravděpodobně je poškozen. Zkuste " +"ručně smažte soubor, abyste se zotavili z chyby. Vaše uživatelské profily nebudou " +"postižené." + msgid "Error uploading to print host:" msgstr "Chyba při nahrávání do tiskového serveru:" @@ -2485,47 +3230,119 @@ msgid "ERROR: not enough resources to execute a new job." msgstr "CHYBA: nedostatek prostředků ke spuštění nové úlohy." msgid "" -"ERROR: Please close all manipulators available from the left toolbar first" +"ERROR: Please close all manipulators available from the left toolbar before " +"fixing the mesh." msgstr "" -"CHYBA: Nejprve zavřete všechny manipulátory dostupné z levého panelu nástrojů" +"CHYBA: Před opravou modelu zavřete všechny manipulátory dostupné z levého panelu " +"nástrojů." msgid "Estimated printing time" msgstr "Odhadovaný čas tisku" -msgid "Estimated printing times" -msgstr "Odhadované časy tisku" - -msgid "Even-odd" -msgstr "Paritní vyplňování" - msgid "Event" msgstr "Akce" +msgid "Everywhere" +msgstr "Všude" + +msgid "Exact last layer height" +msgstr "Přesná výška poslední vrstvy" + +msgid "Exact pattern" +msgstr "Přesný vzor" + +msgid "except for the first %1% layers where the fan is disabled" +msgstr "kromě prvních %1% vrstev, kde je ventilátor deaktivován" + +msgid "except for the first layer where the fan is disabled" +msgstr "kromě první vrstvy, kde je vypnutý ventilátor" + msgid "Exit %s" msgstr "Ukončit %s" msgid "Expand sidebar" msgstr "Rozbalit postranní panel" -msgid "" -"Expansion of the first raft or support layer to improve adhesion to print " -"bed." -msgstr "" -"Rozšíření první vrstvy raftu nebo první vrstvy podpěr pro zlepšení " -"přilnavosti k tiskové podložce." - -msgid "Expansion of the raft in XY plane for better stability." -msgstr "Rozšíření raftu v rovině XY pro lepší stabilitu." - msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." -msgstr "" -"Experimentální nastavení pro zabránění tvorbě podpěr v oblastech po mosty." +msgstr "Experimentální nastavení pro zabránění tvorbě podpěr v oblastech po mosty." + +msgid "" +"Experimental option to remove perimeters where there is nothing under them " +"and where a bridged infill should be better. \n" +" * Remove perimeters: remove the unsupported perimeters, leave the bridge " +"area as-is.\n" +" * Keep only bridges: remove the perimeters in the bridge areas, keep only " +"bridges that end in solid area.\n" +" * Keep bridges and overhangs: remove the unsupported perimeters, keep only " +"bridges that end in solid area, fill the rest with overhang perimeters" +"+bridges.\n" +" * Fill the voids with bridges: remove the unsupported perimeters, draw " +"bridges over the whole hole.* !! this one can escalate to problems with " +"overhangs shaped like /\\, so you should use it only on one layer at a time " +"via the height-range modifier!\n" +"!!Computationally intensive!!. " +msgstr "" +"Experimentální možnost odstranění perimetrů tam, kde pod nimi nic není kde by " +"přemostěná výplň měla být lepší. \n" +" * Odstraňte perimetry: odstraňte nepodporované perimetry, opusťte most plocha tak " +"jak je.\n" +" * Ponechat pouze mosty: odstranit perimetry v oblastech mostů, ponechat pouze " +"mosty, které končí pevnou plochou.\n" +" * Zachovat mosty a převisy: odstranit nepodepřené perimetry, ponechat pouze mosty, " +"které končí pevnou plochou, vyplňte zbytek perimetry převisů+mosty.\n" +" * Vyplňte prázdné prostory mosty: odstraňte nepodepřené perimetry, nakreslete " +"mosty přes celou díru.* !! tohle může eskalovat až k problémůmpřesahy ve tvaru /" +"\\, takže byste jej měli používat vždy pouze na jedné vrstvě přes modifikátor " +"rozsahu výšky!\n" +"!!Výpočetně náročné!!. " + +msgid "" +"Experimental option which modifies (in solid infill) fill flow to have the " +"exact amount of plastic inside the volume to fill (it generally changes the " +"flow from -7% to +4%, depending on the size of the surface to fill and the " +"overlap parameters, but it can go as high as +50% for infill in very small " +"areas where rectilinear doesn't have good coverage). It has the advantage to " +"remove the over-extrusion seen in thin infill areas, from the overlap ratio" +msgstr "" +"Experimentální možnost, která upravuje (v plné výplni) průtok plnění tak, aby měl " +"přesné množství plastu uvnitř objemu, který se má vyplnit (obecně se tím mění " +"průtok od -7% do +4%, v závislosti na velikosti povrchu, který se má vyplnit, a " +"překrývající se parametry, ale u velmi malých výplní to může dosáhnout až " +"+50%oblasti, kde přímočarý nemá dobré pokrytí). Výhodou je, že odstraňte nadměrné " +"vytlačování pozorované v tenkých oblastech výplně z poměru překrytí" + +msgid "" +"Experimental setting. Fan speeds that are too high can clash with the " +"hotend's PID routine." +msgstr "" +"Experimentální nastavení. Příliš vysoké otáčky ventilátoru mohou být v rozporu s " +"hotendova PID rutina." + +msgid "" +"Experimental setting. May enable the hotend to cool down faster during " +"toolchanges" +msgstr "" +"Experimentální nastavení. Může umožnit rychlejší ochlazení hotendu během výměny " +"nástrojů" + +msgid "" +"Experimental: drops nozzle temperature during cooling moves instead of prior " +"to extraction to reduce wait time." +msgstr "" +"Experimentální: pokles teploty trysky během chladicích pohybů namísto předchozíhok " +"extrakci, aby se zkrátila doba čekání." + +msgid "Expert" +msgstr "Expert" msgid "Expert mode" msgstr "Expertní režim" +msgid "Expert View Mode" +msgstr "Režim Expert" + msgid "Export" msgstr "Exportovat" @@ -2535,8 +3352,8 @@ msgstr "Exportovat Konfigura&ci" msgid "Export &G-code" msgstr "Exportovat &G-code" -msgid "Export &Toolpaths as OBJ" -msgstr "Exportovat &Trasy extruderu jako OBJ" +msgid "Export &toolpaths as OBJ" +msgstr "Exportovat &trasy extruderu jako OBJ" msgid "Export 3MF" msgstr "Exportovat 3MF" @@ -2553,6 +3370,9 @@ msgstr "Exportovat AMF" msgid "Export AMF file:" msgstr "Exportovat AMF soubor:" +msgid "Export as STL" +msgstr "Exportovat jako STL" + msgid "Export config" msgstr "Exportovat konfiguraci" @@ -2565,6 +3385,16 @@ msgstr "Exportovat Konfigurační balík včetně fyzických tiskáren" msgid "Export current configuration to file" msgstr "Exportovat současnou konfiguraci do souboru" +msgid "" +"Export current configuration to file, with only settings compatible with " +"PrusaSlicer" +msgstr "" +"Exportovat aktuální konfiguraci do souboru, pouze s nastavením kompatibilním s " +"PrusaSlicer" + +msgid "Export current plate as AMF" +msgstr "Exportovat stávající plochu jako AMF" + msgid "Export current plate as G-code" msgstr "Exportovat stávající plochu do G-code" @@ -2584,7 +3414,7 @@ msgstr "Exportovat úplné zdrojové cesty modelů a dílů do souborů 3mf a am msgid "Export G-code" msgstr "Exportovat G-code" -msgid "Export G-code to SD Card / Flash Drive" +msgid "Export G-code to SD card / Flash drive" msgstr "Exportovat G-code na SD kartu / Flash disk" msgid "Export G-Code." @@ -2599,11 +3429,14 @@ msgstr "Exportovat OBJ soubor:" msgid "Export of a temporary 3mf file failed" msgstr "Export dočasného 3MF souboru selhalo" -msgid "Export Plate as &STL" -msgstr "Exportovat Plochu jako &STL" +msgid "Export plate as &AMF" +msgstr "Exportovat plochu jako &AMF" -msgid "Export Plate as STL &Including Supports" -msgstr "Exportovat T&iskovou plochu včetně podpěr jako STL" +msgid "Export plate as &STL" +msgstr "Exportovat plochu jako &STL" + +msgid "Export plate as STL &including supports" +msgstr "Exportovat t&iskovou plochu včetně podpěr jako STL" msgid "Export SLA" msgstr "Exportovat SLA" @@ -2629,30 +3462,30 @@ msgstr "Exportovat model(y) jako OBJ." msgid "Export the model(s) as STL." msgstr "Exportovat model(y) jako STL." +msgid "Export the selected object as STL file" +msgstr "Exportovat vybrané objekty jako STL soubor" + +msgid "Export to &Prusa Config" +msgstr "Exportovat do &Prusa Config" + msgid "Export to SD card / Flash drive" msgstr "Export na SD kartu / Flash disk" msgid "Export toolpaths as OBJ" msgstr "Exportovat trasy extruderu jako OBJ" -msgid "Export." -msgstr "Export." - -msgid "Exporting configuration bundle" -msgstr "Exportování konfiguračního balíku" - msgid "Exporting finished." msgstr "Exportování dokončeno." msgid "Exporting G-code" msgstr "Exportování souboru G-code" +msgid "Exporting model" +msgstr "Exportování modelu" + msgid "Exporting source model" msgstr "Exportování zdrojového modelu" -msgid "Exporting." -msgstr "Exportování." - msgid "Exposition time is out of printer profile bounds." msgstr "Doba osvitu je mimo rozsah profilu tiskárny." @@ -2662,9 +3495,36 @@ msgstr "Osvit" msgid "Exposure time" msgstr "Doba osvitu" +msgid "ext peri first for inner side" +msgstr "extra perimetr first pro vnitřní stranu" + +msgid "Ext peri first for outer side" +msgstr "Extra peri první pro vnější stranu" + +msgid "Ext. peri. cut corners" +msgstr "Vnější obvodové řezané rohy" + +msgid "Ext. peri. overlap" +msgstr "Vnější peri. překrytí" + +msgid "External" +msgstr "Vnější" + msgid "External perimeter" msgstr "Vnější perimetr" +msgid "external perimeter" +msgstr "Vnější perimetr" + +msgid "External perimeter fan speed" +msgstr "Rychlost ventilátoru vnějšího perimetru" + +msgid "External perimeter first" +msgstr "Nejprve vnější perimetr" + +msgid "external perimeter overlap" +msgstr "překrytí vnějšího perimetru" + msgid "external perimeters" msgstr "vnější perimetry" @@ -2674,12 +3534,60 @@ msgstr "Vnější perimetry" msgid "External perimeters first" msgstr "Nejprve tisknout vnější perimetry" +msgid "External perimeters spacing" +msgstr "Vzdálenost vnějších perimetrů" + +msgid "External perimeters speed" +msgstr "Rychlost vnějšího perimetru" + +msgid "External perimeters width" +msgstr "Šířka vnějšího perimetru" + +msgid "ExternalPerimeter in vase mode" +msgstr "Vnější perimetr v režimu vázy" + msgid "Extra length on restart" msgstr "Extra vzdálenost při návratu" msgid "Extra loading distance" msgstr "Extra délka při zavádění" +msgid "Extra perimeter on odd layers" +msgstr "Extra perimetr na lichých vrstvách" + +msgid "Extra perimeters" +msgstr "Extra perimetr" + +msgid "Extra perimeters (do nothing)" +msgstr "Extra perimetr (nedělat nic)" + +msgid "Extra perimeters over overhangs" +msgstr "Extra perimetr přes převisy" + +msgid "Extra skirt lines on the first layer." +msgstr "Extra linie obrysu v první vrstvě." + +msgid "Extra unretraction" +msgstr "Extra vzdálenost při návratu" + +msgid "Extra Wipe for external perimeters" +msgstr "Extra očistit pro vnější perimetri" + +msgid "Extrat length on toolchange restart" +msgstr "Extra délka při restartu výměny nástroje" + +msgid "" +"Extrude perimeters that have a part over an overhang in the reverse " +"direction on odd layers. This alternating pattern can drastically improve " +"steep overhang.\n" +"!! this is a very slow algorithm (it uses the same results as " +"extra_perimeters_overhangs) !!" +msgstr "" +"Vysunout perimetry, které mají část přes přesah v opačném směrusměr na lichých " +"vrstvách. Tento střídající se vzor může výrazně zlepšitstrmý převis.\n" +"!! toto je velmi pomalý algoritmus (používá stejné výsledky jako " +"extra_perimeters_overhangs) !!" + msgid "Extruder" msgstr "Extruder" @@ -2692,12 +3600,49 @@ msgstr "Extruder (nástroj) se změní na Extruder \"%1%\"" msgid "Extruder changed to" msgstr "Extruder změněn na" +msgid "Extruder clearance (mm)" +msgstr "Kolizní oblast extrudéru (mm)" + +msgid "Extruder clearance height" +msgstr "Světlá výška extrudéru" + +msgid "Extruder clearance radius" +msgstr "Poloměr vůle extrudéru" + msgid "Extruder Color" msgstr "Barva extruderu" +msgid "Extruder decimals" +msgstr "Extruder desetinná místa" + +msgid "Extruder fan offset" +msgstr "Offset ventilátoru extrudéru" + +msgid "" +"Extruder nozzle temperature for first layer. If you want to control " +"temperature manually during print, set zero to disable temperature control " +"commands in the output file." +msgstr "" +"Teplota trysky extrudéru pro první vrstvu. Pokud chcete kontrolovat teplota ručně " +"během tisku, nastavte nulu pro deaktivaci ovládání teplotypříkazy ve výstupním " +"souboru." + +msgid "" +"Extruder nozzle temperature for layers after the first one. Set zero to " +"disable temperature control commands in the output G-code." +msgstr "" +"Teplota trysky extrudéru pro vrstvy po první. Nastavte nulu na zakázat příkazy " +"řízení teploty ve výstupním G-kódu." + msgid "Extruder offset" msgstr "Odsazení extruderu" +msgid "Extruder retraction calibration" +msgstr "Kalibrace retrakce extrudéru" + +msgid "Extruder temp offset" +msgstr "Offset teploty extrudéru" + msgid "Extruders" msgstr "Extrudery" @@ -2710,6 +3655,9 @@ msgstr "Extruze" msgid "Extrusion axis" msgstr "Osa extruderu" +msgid "Extrusion direction" +msgstr "Pokyny extruze" + msgid "Extrusion multiplier" msgstr "Násobič extruze" @@ -2722,6 +3670,15 @@ msgstr "Šířka extruze" msgid "Facets" msgstr "Facety" +msgid "facets added" +msgstr "facety přidány" + +msgid "facets removed" +msgstr "facety odebrány" + +msgid "facets reversed" +msgstr "facety otočeny" + msgid "Faded layers" msgstr "Vrstvy počátečního osvitu" @@ -2740,8 +3697,14 @@ msgstr "Zpracování šablony output_filename_format selhalo." msgid "Failed to activate configuration snapshot." msgstr "Aktivace konfiguračního snapshotu se nezdařila." -msgid "Failed to drill some holes into the model" -msgstr "Některé otvory se do modelu nepodařilo se vyvrtat" +msgid "Fan" +msgstr "Ventilátor" + +msgid "Fan KickStart time" +msgstr "Ventilátor Doba spuštění ventilátoru" + +msgid "Fan PWM from 0-100" +msgstr "PWM ventilátoru od 0-100" msgid "Fan speed" msgstr "Rychlost ventilátoru" @@ -2749,6 +3712,9 @@ msgstr "Rychlost ventilátoru" msgid "Fan Speed (%)" msgstr "Rychlost ventilátoru (%)" +msgid "Fan speed - default" +msgstr "Rychlost ventilátoru - výchozí" + msgid "" "Fan speed will be ramped up linearly from zero at layer " "\"disable_fan_first_layers\" to maximum at layer \"full_fan_speed_layer\". " @@ -2756,15 +3722,24 @@ msgid "" "\"disable_fan_first_layers\", in which case the fan will be running at " "maximum allowed speed at layer \"disable_fan_first_layers\" + 1." msgstr "" -"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě " -"\"disable_fan_first_layers\" na maximum ve vrstvě \"full_fan_speed_layer\". " -"Hodnota \"full_fan_speed_layer\" bude ignorována, pokud je nižší než " -"\"disable_fan_first_layers\", v takovém případě se bude ventilátor točit na " -"maximální povolenou hodnotu ve vrstvě \"disable_fan_first_layers\" + 1." +"Otáčky ventilátoru se lineárně zvýší z nuly ve vrstvě \"disable_fan_first_layers\" " +"na maximum ve vrstvě \"full_fan_speed_layer\". Hodnota \"full_fan_speed_layer\" " +"bude ignorována, pokud je nižší než \"disable_fan_first_layers\", v takovém případě " +"se bude ventilátor točit na maximální povolenou hodnotu ve vrstvě " +"\"disable_fan_first_layers\" + 1." + +msgid "Fan startup delay" +msgstr "Zpoždění spuštění ventilátoru" + +msgid "fan will run by default to %1%%%" +msgstr "ventilátor poběží ve výchozím nastavení na %1%%%" msgid "Fast" msgstr "Rychlý" +msgid "Fast mode" +msgstr "Rychlý mód" + msgid "Fast tilt" msgstr "Rychlý náklon" @@ -2774,36 +3749,51 @@ msgstr "Fatální chyba" msgid "Fatal error, exception catched: %1%" msgstr "Závažná chyba, zachycená výjimka: %1%" +msgid "Feature" +msgstr "Vlastnosti" + msgid "Feature type" msgstr "Typ" msgid "Feature types" msgstr "Typy extrudování" -msgid "filament" -msgstr "filament" +msgid "FFF Technology Printers" +msgstr "Tiskárny technologie FFF" msgid "Filament" msgstr "Filament" +msgid "filament" +msgstr "filament" + msgid "Filament and Nozzle Diameters" msgstr "Průměr filamentu a trysky" msgid "Filament at extruder %1%" msgstr "Filament v extruderu %1%" -msgid "Filament Diameter:" +msgid "Filament color" +msgstr "Barva vlákna" + +msgid "Filament cost" +msgstr "Cena vlákna" + +msgid "Filament Diameter:" msgstr "Průměr filamentu:" -msgid "Filament End G-code" -msgstr "Filament Konec G-code" +msgid "Filament end G-code" +msgstr "G-Code konce vlákna" + +msgid "Filament Flow calibration" +msgstr "Kalibrace průtoku vlákna" msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "" -"Filament je chlazen pohyby tam a zpět v chladicí trubičce. Zadejte " -"požadovaný počet těchto pohybů." +"Filament je chlazen pohyby tam a zpět v chladicí trubičce. Zadejte požadovaný počet " +"těchto pohybů." msgid "Filament load time" msgstr "Doba zavádění filamentu" @@ -2824,13 +3814,16 @@ msgid "Filament properties" msgstr "Vlastnosti filamentu" msgid "Filament Settings" -msgstr "Nastavení filamentu" +msgstr "Nastavení Filamentu" msgid "Filament Settings Tab" -msgstr "Panel Nastavení filamentu" +msgstr "Panel Nastavení Filamentu" -msgid "Filament Start G-code" -msgstr "Filament Začátek G-code" +msgid "Filament start G-code" +msgstr "G-Code startu vlákna" + +msgid "Filament temperature calibration" +msgstr "Kalibrace teploty vlákna" msgid "Filament type" msgstr "Typ filamentu" @@ -2844,15 +3837,19 @@ msgstr "filamenty" msgid "Filaments" msgstr "Filamenty" +msgid "" +"Filaments marked with * are not compatible with some installed " +"printers." +msgstr "" +"Filamenty označené znakem * nejsou kompatibilní s některými " +"nainstalovanými tiskárnami." + msgid "file close failed" msgstr "zavření souboru selhalo" msgid "file create failed" msgstr "vytvoření souboru selhalo" -msgid "File for the replace wasn't selected" -msgstr "Soubor pro nahrazení nebyl vybrán" - msgid "File Not Found" msgstr "Soubor nenalezen" @@ -2886,20 +3883,75 @@ msgstr "Soubory" msgid "Files association" msgstr "Asociace souborů" +msgid "Fill" +msgstr "Výplně" + msgid "Fill angle" msgstr "Úhel výplně" +msgid "Fill angle increment" +msgstr "Přírůstek úhlu výplně" + msgid "Fill bed" msgstr "Vyplnit podložku" +msgid "Fill bed with instances" +msgstr "Vyplnit tiskovou plochu instancemi" + +msgid "" +"Fill cracks smaller than 2x gap closing radius during the triangle mesh " +"slicing. The gap closing operation may reduce the final print resolution, " +"therefore it is advisable to keep the value reasonably low." +msgstr "" +"Vyplňte trhliny menší než 2x poloměr uzavření mezery během trojúhelníkové " +"sítě slicování. Operace uzavření mezery může snížit konečné rozlišení tisku,proto je " +"vhodné držet hodnotu přiměřeně nízkou." + msgid "Fill density" msgstr "Hustota výplně" -msgid "Find" -msgstr "Najít" +msgid "Fill pattern" +msgstr "Vzor výplně" -msgid "Find / replace patterns in G-code lines and substitute them." -msgstr "Vyhledávání / nahrazování vzorů v řádcích G-code a jejich nahrazování." +msgid "" +"Fill pattern for bottom infill. This only affects the bottom visible layer, " +"and not its adjacent solid shells." +msgstr "" +"Vzor výplně pro spodní výplň. Toto ovlivní pouze spodní viditelnou vrstvu,a ne jeho " +"přilehlé plné skořápky." + +msgid "Fill pattern for general low-density infill." +msgstr "Vzor výplně pro obecnou výplň s nízkou hustotou." + +msgid "" +"Fill pattern for solid (internal) infill. This only affects the solid not-" +"visible layers. You should use rectilinear in most cases. You can try " +"ironing for translucent material. Rectilinear (filled) replaces zig-zag " +"patterns by a single big line & is more efficient for filling little spaces." +msgstr "" +"Vzor výplně pro pevnou (vnitřní) výplň. To ovlivní pouze těleso ne-viditelné " +"vrstvy. Ve většině případů byste měli používat přímočaré. Můžete zkusit ironing pro " +"průsvitný materiál. Přímé (plněné) nahrazuje cik-cak vzory na jedné velké linii a " +"je efektivnější pro vyplnění malých míst." + +msgid "" +"Fill pattern for top infill. This only affects the top visible layer, and " +"not its adjacent solid shells." +msgstr "" +"Nastavte vzor pro horní výplň. Ovlivňuje pouze horní viditelnou vrstvu a ne její " +"sousední plné vrstvy." + +msgid "Fill the remaining area of bed with instances of the selected object" +msgstr "Vyplní zbývající tiskovou plochu instancemi vybraného objektu" + +msgid "Fill the voids with bridges" +msgstr "Vyplňte mezery mostů" + +msgid "filling horizontal gaps on slopes" +msgstr "vyplnění vodorovných mezer na svazích" + +msgid "Filtering" +msgstr "Filtrování" msgid "Finished" msgstr "Dokončeno" @@ -2925,47 +3977,56 @@ msgstr "prvního" msgid "First layer" msgstr "První vrstva" +msgid "first layer" +msgstr "První vrstva" + +msgid "First layer acceleration" +msgstr "Zrychlení první vrstvy" + msgid "First layer bed temperature" msgstr "Teplota tiskové podložky při první vrstvě" -msgid "First layer density" -msgstr "Hustota první vrstvy" +msgid "First layer calibration" +msgstr "Kalibrace první vrstvy" -msgid "First layer expansion" -msgstr "Rozšíření první vrstvy" +msgid "First layer extruder" +msgstr "Extrudér první vrstvy" + +msgid "First layer flow ratio" +msgstr "Poměr průtoku první vrstvy" msgid "First layer height" msgstr "Výška první vrstvy" -msgid "" -"First layer height is not valid.\n" -"\n" -"The first layer height will be reset to 0.01." -msgstr "" -"Výška první vrstvy není platná.\n" -"\n" -"Výška vrstvy bude resetována na 0,01." +msgid "First layer height can't be greater than %s" +msgstr "Výška první vrstvy nemůže být větší než %s" + +msgid "First layer height can't be thinner than %s" +msgstr "Výška první vrstvy nemůže být tenčí než %s" msgid "First layer nozzle temperature" msgstr "Teplota trysky při první vrstvě" +msgid "First layer spacing" +msgstr "Výška první vrstvy" + msgid "First layer speed" msgstr "Rychlost první vrstvy" msgid "First layer volumetric" -msgstr "Volumetrická hodnota první vrstvy" +msgstr "Objemová hodnota první vrstvy" -msgid "First object layer over raft interface" -msgstr "První vrstva objektu nad raftem" +msgid "First layer width" +msgstr "Šířka první vrstvy" msgid "Fix through NetFabb" msgstr "Opravit pomocí NetFabb" -msgid "Fixing through NetFabb" -msgstr "Oprava prostřednictvím NetFabb" +msgid "Fix through the Netfabb" +msgstr "Opravit pomocí služby Netfabb" -msgid "Flash Printer &Firmware" -msgstr "Nahrát &Firmware Tiskárny" +msgid "Flash printer &firmware" +msgstr "Nahrát &firmware tiskárny" msgid "Flash!" msgstr "Nahrát!" @@ -2985,71 +4046,53 @@ msgstr "Probíhá nahrávání firmware. Prosím neodpojujte tiskárnu!" msgid "Flashing succeeded!" msgstr "Nahrávání bylo úspěšné!" -msgid "Floating reserved operand" -msgstr "Plovoucí rezervovaný operand" - msgid "Flow" msgstr "Průtok" +msgid "Flow calibration" +msgstr "Kalibrace průtoku" + msgid "Flow rate" msgstr "Průtok" -msgid "" -"Following printer preset is duplicated:%1%The above preset for printer \"%2%" -"\" will be used just once." -msgid_plural "" -"Following printer presets are duplicated:%1%The above presets for printer " -"\"%2%\" will be used just once." -msgstr[0] "" -"Následující přednastavení tiskárny je duplicitní:%1%Výše uvedené " -"přednastavení pro tiskárnu \"%2%\" bude použito pouze jednou." -msgstr[1] "" -"Následující přednastavení tiskárny jsou duplicitní:%1%Výše uvedené " -"přednastavení pro tiskárnu \"%2%\" budou použity pouze jednou." -msgstr[2] "" -"Následující přednastavení tiskárny jsou duplicitní:%1%Výše uvedené " -"přednastavení pro tiskárnu \"%2%\" budou použity pouze jednou." -msgstr[3] "" -"Následující přednastavení tiskárny jsou duplicitní:%1%Výše uvedené " -"přednastavení pro tiskárnu \"%2%\" budou použity pouze jednou." +msgid "Flow ratio" +msgstr "Průtok" msgid "" -"Following printer profiles has no default filament: %1%Please select one " -"manually." +"Flow ratio to compensate for the gaps in a bridged top surface. Used for " +"ironing infillpattern to prevent regions where the low-flow pass does not " +"provide a smooth surface due to a lack of plastic. You can increase it " +"slightly to pull the top layer at the correct height. Recommended maximum: " +"120%." msgstr "" -"Následující profily tiskáren nemají žádný výchozí filament: %1%Vyberte jej " -"prosím ručně." +"Poměr průtoku pro kompenzaci mezer v přemostěném horním povrchu. Používá se pro " +"ironing vzor výplně, aby se zabránilo regionům, kde neprochází " +"nízkoprůtokposkytněte hladký povrch kvůli nedostatku plastu. Můžete ho " +"zvětšitmírně, aby se vrchní vrstva vytáhla ve správné výšce. Doporučené maximum: " +"120 %." msgid "" -"Following printer profiles has no default material: %1%Please select one " -"manually." +"Following printer preset(s) is duplicated:%1%The above preset for printer " +"\"%2%\" will be used just once." msgstr "" -"Následující profily tiskáren nemají žádný výchozí materiál: %1%Vyberte jej " -"prosím ručně." +"Následující přednastavení tiskárny je duplicitní:%1%Výše uvedené přednastavení bude " +"pro tiskárnu \"%2%\" použito pouze jednou." -msgid "Folowing model repair failed" -msgid_plural "Folowing models repair failed" -msgstr[0] "Oprava modelu se nezdařila" -msgstr[1] "Opravy modelů se nezdařily" -msgstr[2] "Opravy modelů se nezdařily" -msgstr[3] "Opravy modelů se nezdařily" +msgid "For more information please visit Prusa wiki page:" +msgstr "Pro více informací navštivte wiki stránku Prusa:" msgid "" -"For a multipart object, this value isn't accurate.\n" -"It doesn't take account of intersections and negative volumes." +"For stock extruders, usually 40-42mm. For bondtech extruder upgrade, " +"usually 30-32mm. Start with a low value and gradually increase it until " +"strings are gone. If there are blobs on your wipe tower, your value is too " +"high." msgstr "" -"Pro vícedílný objekt není tato hodnota přesná.\n" -"Nezohledňuje průniky a negativní objemy." - -msgid "For new project all modifications will be reseted" -msgstr "U nového projektu budou všechny změny resetovány" +"Pro standardní extrudéry, obvykle 40-42 mm. Pro upgrade extruderu bondtech,obvykle " +"30-32 mm. Začněte s nízkou hodnotou a postupně ji zvyšujte, dokud řetězce jsou " +"pryč. Pokud jsou na vaší stírací věži kapky, vaše hodnota je přílišvysoký." -msgid "" -"For snug supports, the support regions will be merged using morphological " -"closing operation. Gaps smaller than the closing radius will be filled in." -msgstr "" -"V případě přiléhavých podpor se oblasti podpor sloučí pomocí morfologické " -"uzavírací operace. Mezery menší než poloměr uzavření budou vyplněny." +msgid "For support enforcers only" +msgstr "Pouze pro vynucené podpěry" msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" @@ -3079,27 +4122,33 @@ msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "" -"Vynucení plné výplně pro oblasti, které mají menší plochu, než je stanovená " -"prahová hodnota." +"Vynucení plné výplně pro oblasti, které mají menší plochu, než je stanovená prahová " +"hodnota." msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" -"Vynucení vytváření pevných skořepin mezi sousedními materiály/objemy. " -"Užitečné pro tisk s více extrudery s průsvitnými materiály nebo ručně " -"rozpustným podpůrným materiálem." +"Vynucení vytváření pevných skořepin mezi sousedními materiály/objemy. Užitečné pro " +"tisk s více extrudery s průsvitnými materiály nebo ručně rozpustným podpůrným " +"materiálem." msgid "" "Forward-compatibility rule when loading configurations from config files and " "project files (3MF, AMF)." msgstr "" -"Pravidlo dopředné kompatibility při načítání konfigurací z konfiguračních " -"souborů a souborů projektů (3MF, AMF)." +"Pravidlo dopředné kompatibility při načítání konfigurací z konfiguračních souborů a " +"souborů projektů (3MF, AMF)." -msgid "Found reserved keywords in" -msgstr "Nalezená vyhrazená klíčová slova v" +msgid "FreeCAD path" +msgstr "Cesta FreeCAD" + +msgid "FreeCad python script" +msgstr "FreeCad python skript" + +msgid "FreePySCAD : script engine for FreeCAD" +msgstr "FreePySCAD: skriptovací stroj pro FreeCAD" msgid "from" msgstr "z" @@ -3107,9 +4156,18 @@ msgstr "z" msgid "From" msgstr "Předchozí extruder" +msgid "from brim" +msgstr "Od límce" + +msgid "From filament" +msgstr "Filament" + msgid "From Object List You can't delete the last solid part from object." msgstr "Ze seznamu objektů nemůžete smazat poslední část objektu." +msgid "From plane" +msgstr "Z letadla" + msgid "Front" msgstr "Zepředu" @@ -3122,26 +4180,11 @@ msgstr "Maximální otáčky ventilátoru ve vrstvě" msgid "full profile name" msgstr "celé jméno profilu" -msgid "Fullscreen" -msgstr "Fullscreen" - -msgid "Fuzzy Skin" -msgstr "Členitý povrch" - -msgid "Fuzzy skin (experimental)" -msgstr "Členitý povrch (experimentální)" - -msgid "Fuzzy skin point distance" -msgstr "Vzdálenosti bodů členitého povrchu" - -msgid "Fuzzy skin thickness" -msgstr "Tloušťka členitého povrchu" - -msgid "Fuzzy skin type." -msgstr "Typ členitého povrchu." - msgid "G-code" -msgstr "G-code" +msgstr "G-Code" + +msgid "G-Code" +msgstr "G-Code" msgid "" "G-code associated to this tick mark is in a conflict with print mode.\n" @@ -3151,22 +4194,22 @@ msgstr "" "Editace způsobí změny v posuvníku." msgid "G-code file exported to %1%" -msgstr "G-code byl exportován do %1%" +msgstr "G-Code byl exportován do %1%" msgid "G-code flavor" -msgstr "Druh G-code" +msgstr "Druh G-Code" msgid "G-code preview" -msgstr "Náhled G-codu" +msgstr "Náhled G-Code" -msgid "G-code resolution" -msgstr "G-code rozlišení" +msgid "G-Code to switch from this toolhead" +msgstr "G-Code pro přechod z této nástrojové hlavy" -msgid "G-code substitutions" -msgstr "Nahrazení G-codu" +msgid "G-Code to switch to this toolhead" +msgstr "G-Code pro přepnutí na tento nástroj" msgid "G-code viewer" -msgstr "Prohlížeč G-codu" +msgstr "Prohlížeč G-Codu" msgid "g/cm³" msgstr "g/cm³" @@ -3175,19 +4218,52 @@ msgid "g/ml" msgstr "g/ml" msgid "Gap fill" -msgstr "Výplň tenkých stěn" +msgstr "Výplň mezery" + +msgid "Gap Fill" +msgstr "Vyplnit mezery" + +msgid "Gap fill overlap" +msgstr "Překrytí výplně mezery" + +msgid "Gap fill speed" +msgstr "Rychlost výplě mezery" + +msgid "Gapfill after last perimeter" +msgstr "Vyplnit mezery po posledním perimetru" + +msgid "Gcode done" +msgstr "Gcode hotovo" + +msgid "GCode Pre&view Tab" +msgstr "Karta & G-Code Prohližeč" + +msgid "Gcode precision" +msgstr "Přesnost G-Codu" + +msgid "Gcode preview" +msgstr "G-Code Prohlížeč" msgid "General" msgstr "Obecné" +msgid "Generate" +msgstr "Generovat" + +msgid "Generate 10% intervals around current value" +msgstr "Generovat 10% intervaly kolem aktuální hodnoty" + +msgid "Generate 2% intervals below current value" +msgstr "Generovat 2% intervaly pod aktuální hodnotou" + msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" "Nevygenerovat méně než je počet obrysových smyček potřebných ke spotřebování " -"specifikovaného množství filamentu na spodní vrstvu. U strojů s více " -"extrudery platí toto minimum pro každý extruder." +"specifikovaného množství filamentu na spodní vrstvu. U strojů s více extrudery " +"platí toto minimum pro každý extruder." msgid "Generate support material" msgstr "Generovat podpěry" @@ -3198,10 +4274,10 @@ msgid "" "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" -"Vygeneruje podpěry pro zadaný počet vrstev počítaných od spodního okraje, " -"bez ohledu na to, zda jsou povoleny standartní podpěry nebo nikoliv a bez " -"ohledu na jakýkoli prah úhlu. To je užitečné pro získání větší přilnavosti " -"předmětů s velmi tenkou nebo špatnou stopou na tiskové podložce." +"Vygeneruje podpěry pro zadaný počet vrstev počítaných od spodního okraje, bez " +"ohledu na to, zda jsou povoleny standardní podpěry nebo nikoliv a bez ohledu na " +"jakýkoli práh úhlu. To je užitečné pro získání větší přilnavosti předmětů s velmi " +"tenkou nebo špatnou stopou na tiskové podložce." msgid "Generate supports" msgstr "Generovat podpěry" @@ -3212,9 +4288,15 @@ msgstr "Generovat podpěry modelů" msgid "generated warnings" msgstr "generovaná varování" +msgid "Generating brim" +msgstr "Generování límce" + msgid "Generating G-code" msgstr "Generování G-code" +msgid "Generating G-code layer %s / %s" +msgstr "Generování vrstvy G-kódu %s / %s" + msgid "Generating index buffers" msgstr "Generování indexových bufferů" @@ -3224,8 +4306,11 @@ msgstr "Generování podložky" msgid "Generating perimeters" msgstr "Generování perimetrů" -msgid "Generating skirt and brim" -msgstr "Generování obrysu a límce" +msgid "Generating perimeters: layer %s / %s" +msgstr "Generování perimetrů: vrstva %s / %s" + +msgid "Generating skirt" +msgstr "Generování obrysových smyček" msgid "Generating support material" msgstr "Generování podpěr" @@ -3242,24 +4327,24 @@ msgstr "Generování cest nástroje" msgid "Generating vertex buffer" msgstr "Generování vrcholového bufferu" +msgid "" +"Give to the infill algorithm if the infill needs to be connected, and on " +"which perimeters Can be useful for art or with high infill/perimeter " +"overlap. The result may vary between infill types." +msgstr "" +"Pokud je potřeba připojit výplň, dejte na algoritmus výplně a zapnětekteré " +"perimetry mohou být užitečné pro umění nebo s vysokou výplní/perimetrem přesah. " +"Výsledek se může u různých typů výplně lišit." + msgid "Gizmo cut" msgstr "Gizmo řez" -msgid "Gizmo FDM paint-on seam" -msgstr "Gizmo FDM malování pozice švu" - -msgid "Gizmo FDM paint-on supports" -msgstr "Gizmo FDM malování podpěr" - msgid "Gizmo move" msgstr "Gizmo posuv" msgid "Gizmo move: Press to snap by 1mm" msgstr "Gizmo posuvu: Stiskni pro 1mm krok" -msgid "Gizmo Multi Material painting" -msgstr "Gizmo Multimateriálového malování" - msgid "Gizmo Place face on bed" msgstr "Gizmo Umístit plochou na podložku" @@ -3268,8 +4353,7 @@ msgstr "Gizmo rotace" msgid "Gizmo rotate: Press to rotate selected objects around their own center" msgstr "" -"Gizmo rotace: Stiskni pro rotaci vybraných objektů kolem jejich vlastních " -"středů" +"Gizmo rotace: Stiskni pro rotaci vybraných objektů kolem jejich vlastních středů" msgid "Gizmo scale" msgstr "Gizmo měřítko" @@ -3279,8 +4363,8 @@ msgstr "Gizmo měřítko: Stiskem aktivujete změnu velikosti pouze v jednom sm msgid "Gizmo scale: Press to scale selected objects around their own center" msgstr "" -"Gizmo měřítko: Stiskni pro změnu velikosti vybraných objektů v jejich " -"vlastních středech" +"Gizmo měřítko: Stiskni pro změnu velikosti vybraných objektů v jejich vlastních " +"středech" msgid "Gizmo scale: Press to snap by 5%" msgstr "Gizmo měřítko: Stiskni pro 5% krok" @@ -3312,12 +4396,22 @@ msgstr "Gizma" msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero General Public License, verze 3" +msgid "Goal:" +msgstr "Cíl:" + msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" -"Je zapotřebí velká přesnost, proto použijte posuvné měřítko (šupleru) a " -"proveďte několik měření po délce filamentu, poté vypočítejte průměr." +"Je zapotřebí velká přesnost, proto použijte posuvné měřítko (šupleru) a proveďte " +"několik měření po délce filamentu, poté vypočítejte průměr." + +msgid "" +"Grey values means that they can't be send to your firmware (no g-code " +"available)." +msgstr "" +"Šedé hodnoty znamenají, že je nelze odeslat do vašeho firmwaru (bez g-kódu k " +"dispozici)." msgid "Grid" msgstr "Mřížka" @@ -3331,6 +4425,9 @@ msgstr "Manipulace se skupinou" msgid "GUI" msgstr "GUI" +msgid "Gui color" +msgstr "Upravit barvu" + msgid "Gyroid" msgstr "Gyroid" @@ -3343,15 +4440,35 @@ msgstr "Průnik podpěry do modelu" msgid "Head penetration should not be greater than the head width." msgstr "Průnik hrotu podpěry by neměl být větší než je tloušťka hrotu podpěry." +msgid "" +"Heated build plate temperature for the first layer. Set zero to disable bed " +"temperature control commands in the output." +msgstr "" +"Teplota vyhřívané stavební desky pro první vrstvu. Nastavením nuly deaktivujete " +"postelpříkazy řízení teploty na výstupu." + msgid "Height" msgstr "Výška" msgid "Height (mm)" msgstr "Výška (mm)" +msgid "height in layers" +msgstr "Výška ve vrstvách" + +msgid "" +"Height of skirt expressed in layers. Set this to a tall value to use skirt " +"as a shield against drafts." +msgstr "" +"Výška obrysu vyjádřená ve vrstvách. Nastavte tuto hodnotu vysokou, pro použití " +"obrysu jako stínění proti průvanu." + msgid "Height of the display" msgstr "Výška displeje" +msgid "Height range Modifier" +msgstr "Modifikátor Výškového rozsahu" + msgid "Height ranges" msgstr "Výškové rozsahy" @@ -3365,8 +4482,8 @@ msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" -"Ahoj, vítejte v %su! Tento %s vám pomůže se základní konfigurací; jen " -"několik nastavení a budete připraveni tisknout." +"Ahoj, vítejte v %su! Tento %s vám pomůže se základní konfigurací; jen několik " +"nastavení a budete připraveni tisknout." msgid "Help" msgstr "Nápověda" @@ -3377,12 +4494,21 @@ msgstr "Nápověda (pro FFF)" msgid "Help (SLA options)" msgstr "Nápověda (pro SLA)" +msgid "Help / Details:" +msgstr "Nápověda / podrobnosti:" + msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "" -"Zde můžete upravit požadovaný objem čištění (mm³) pro kteroukoliv dvojici " -"extruderů." +"Zde můžete upravit požadovaný objem čištění (mm³) pro kteroukoliv dvojici extruderů." + +msgid "" +"Here you can put your personal notes. This text will be added to the G-code " +"header comments." +msgstr "" +"Sem můžete vkládat své osobní poznámky. Tento text bude přidán do G-kóduzáhlaví " +"komentáře." msgid "Hide ruler" msgstr "Skrýt pravítko" @@ -3393,9 +4519,6 @@ msgstr "Zvýšený proud do extruderového motoru při výměně filamentu" msgid "Higher print quality versus higher print speed." msgstr "Vyšší kvalita tisku versus vyšší rychlost tisku." -msgid "Highlight overhang by angle" -msgstr "Zvýraznění převisu podle úhlu" - msgid "Hilbert Curve" msgstr "Hilbertova křivka" @@ -3427,11 +4550,10 @@ msgid "" "interior more rounded. At zero, the interior will resemble the exterior the " "most." msgstr "" -"Tvorba dutiny se provádí ve dvou krocích: nejprve se imaginární vnitřní " -"stěna vypočítá hlouběji (offset plus vzdálenost uzavření) v objektu a poté " -"se nafoukne zpět na zadaný offset. Díky větší vzdálenosti uzavření je " -"vnitřek modelu zaoblenější. Při nulové hodnotě se vnitřek modelu nejvíce " -"podobá vnějšku modelu." +"Tvorba dutiny se provádí ve dvou krocích: nejprve se imaginární vnitřní stěna " +"vypočítá hlouběji (offset plus vzdálenost uzavření) v objektu a poté se nafoukne " +"zpět na zadaný offset. Díky větší vzdálenosti uzavření je vnitřek modelu " +"zaoblenější. Při nulové hodnotě se vnitřek modelu nejvíce podobá vnějšku modelu." msgid "Hollowing model" msgstr "Vydutění modelu" @@ -3442,6 +4564,9 @@ msgstr "Změna parametru dutiny" msgid "Honeycomb" msgstr "Plástev" +msgid "horizontal" +msgstr "horizontální" + msgid "Horizontal shells" msgstr "Vodorovné stěny" @@ -3454,6 +4579,29 @@ msgstr "Horizontální posuvník - Pohyb aktivním ukazatelem vlevo" msgid "Horizontal slider - Move active thumb Right" msgstr "Horizontální posuvník - Pohyb aktivním ukazatelem vpravo" +msgid "" +"Horizontal width of the brim that will be printed around each object on the " +"first layer." +msgstr "Šířka límce, který bude vytištěn v první vrstvě okolo každého objektu." + +msgid "" +"Horizontal width of the brim that will be printed inside each object on the " +"first layer." +msgstr "" +"Tato vlajka zapíná límec, který bude vytištěn kolem každého objektu při první " +"vrstvě." + +msgid "" +"Horizontal width of the skirt that will be printed around each object. If " +"left as zero, first layer extrusion width will be used if set and the skirt " +"is only 1 layer height, or perimeter extrusion width will be used (using the " +"computed value if not set)." +msgstr "" +"Horizontální šířka sukně, která bude vytištěna kolem každého předmětu.necháno jako " +"nula, použije se šířka vysunutí první vrstvy, pokud je nastavena a sukněje pouze 1 " +"výška vrstvy, nebo se použije obvodová šířka vysunutí (pomocí vypočítaná hodnota, " +"pokud není nastavena)." + msgid "Host" msgstr "Server" @@ -3482,9 +4630,61 @@ msgstr "Jak hluboko mají spojky proniknou do modelu." msgid "How much the pinhead has to penetrate the model surface" msgstr "Jak moc hrot podpěry pronikne do povrchu modelu" +msgid "" +"How much the supports should lift up the supported object. If this value is " +"zero, the bottom of the model geometry will be considered as part of the pad." +"If \"Pad around object\" is enabled, this value is ignored." +msgstr "" +"Jak moc by podpěry měly zvednout podepřený objekt. Pokud je tato hodnota nula, " +"spodní část geometrie modelu bude považována za součást podložky.Pokud je povoleno " +"\"Pad around object\", tato hodnota je ignorována." + msgid "How to apply limits" msgstr "Uplatnění limitů" +msgid "" +"How to apply the Machine Limits.\n" +"* In every case, they will be used as safeguards: Even if you use a print " +"profile that sets an acceleration of 5000, if in your machine limits the " +"acceleration is 4000, the outputted gcode will use the 4000 limit.\n" +"* You can also use it as a safeguard and to have a better printing time " +"estimate.\n" +"* You can also use it as a safeguard, to have a better printing time " +"estimate and emit the limits at the begining of the gcode file, with M201 " +"M202 M203 M204 and M205 commands. If you want only to write a sub-set, " +"choose the 'for time estimate' option and write your own gcodes in the " +"custom gcode section." +msgstr "" +"Jak použít omezení stroje.\n" +"* V každém případě budou použity jako ochrana: I když použijete tiskprofil, který " +"nastavuje zrychlení na 5000, pokud ve vašem stroji omezuje zrychlení je 4000, " +"vydaný kód gcode použije limit 4000.\n" +"* Můžete jej také použít jako ochranu a pro kratší dobu tiskuodhad.\n" +"* Můžete to také použít jako ochranu, abyste měli lepší čas tiskuodhadnout a " +"odeslat limity na začátku souboru gcode s M201Příkazy M202 M203 M204 a M205. Pokud " +"chcete zapsat pouze podmnožinu, vyberte možnost pro časový odhad a napište své " +"vlastní gcodes do vlastní sekce gcode." + +msgid "" +"How to compute the vertical z-distance.\n" +"From filament: it uses the nearest bit of the filament. When a bridge is " +"extruded, it goes below the current plane.\n" +"From plane: it uses the plane-z. Same as 'from filament' if no 'bridge' is " +"extruded.\n" +"None: No z-offset. Useful for Soluble supports.\n" +msgstr "" +"Jak vypočítat vertikální z-vzdálenost.\n" +"Z vlákna: používá nejbližší kousek vlákna. Když je můstekvytlačený, jde pod " +"aktuální rovinu.\n" +"Z roviny: používá rovinu-z. Stejné jako z vlákna, pokud není mostextrudovaný.\n" +"Žádný: Bez posunu z. Užitečné pro solubilní podpory.\n" + +msgid "How to use the FreeCad python script window." +msgstr "Jak používat okno skriptu FreeCad python." + +msgid "How to use this menu and calibrations." +msgstr "Jak používat toto menu a kalibrace." + msgid "HTTP digest" msgstr "HTTP digest" @@ -3502,8 +4702,14 @@ msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" -"Soubor HTTPS CA je volitelný. Je nutný pouze pokud použijte HTTPS certifikát " -"s vlastním podpisem." +"Soubor HTTPS CA je volitelný. Je nutný pouze pokud použijte HTTPS certifikát s " +"vlastním podpisem." + +msgid "Hyperbola" +msgstr "Hyperbola" + +msgid " icon" +msgstr " ikona" msgid "Icon size in a respect to the default size" msgstr "Velikost ikon vůči výchozí velikosti" @@ -3511,14 +4717,50 @@ msgstr "Velikost ikon vůči výchozí velikosti" msgid "ID" msgstr "ID" +msgid "" +"Ideally, the spacing between two extrusions shouldn't be lower than the " +"nozzle diameter. Below are the extrusion widths for a spacing equal to the " +"nozzle diameter.\n" +msgstr "" +"V ideálním případě by vzdálenost mezi dvěma výstupky neměla být menší než průměr " +"trysky. Níže jsou uvedeny šířky vytlačování pro rozteč rovnající se průměr trysky.\n" + +msgid "idx" +msgstr "idx" + +msgid "" +"If a top surface has to be printed and it's partially covered by another " +"layer, it won't be considered at a top layer where its width is below this " +"value. This can be useful to not let the 'one perimeter on top' trigger on " +"surface that should be covered only by perimeters. This value can be a mm or " +"a % of the perimeter extrusion width." +msgstr "" +"Pokud musí být potištěn horní povrch a je částečně pokryt jinou vrstvou, nebude " +"uvažována v horní vrstvě, kde je její šířka pod touto hodnotou. To může být " +"užitečné k tomu, aby se jeden perimetr nahoře spustil plocha, která by měla být " +"pokryta pouze perimetry. Tato hodnota může být mm nebo % šířky obvodového vysunutí." + +msgid "" +"If activated, at the end of each layer, the printer will switch to a milling " +"head and mill the external perimeters.\n" +"You should set the 'Milling extra XY size' to a value high enough to have " +"enough plastic to mill. Also, be sure that your piece is firmly glued to the " +"bed." +msgstr "" +"Pokud je aktivována, na konci každé vrstvy se tiskárna přepne na frézováníhlavu a " +"frézu na vnější perimetry.\n" +"Měli byste nastavit 'Frézování extra XY velikosti' na hodnotu dostatečně vysokou, " +"abyste měli dost plastu na frézování. Také se ujistěte, že je váš kus pevně " +"přilepen k postel." + msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" "Pokud je zaškrtnuto, budou podpěry generovány automaticky na základě prahové " -"hodnoty převisu. Pokud není zaškrtnuto, bude podpěra generována pouze v " -"místech, kde je umístěn objekt pro \"Vynucení podpěr\"." +"hodnoty převisu. Pokud není zaškrtnuto, bude podpěra generována pouze v místech, " +"kde je umístěn objekt pro \"Vynucení podpěr\"." msgid "" "If enabled, %s checks for new application versions online. When a new " @@ -3526,10 +4768,10 @@ msgid "" "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" -"Pokud je povoleno, kontroluje %s nově dostupné verze. V případě, že je nová " -"verze k dispozici, zobrazí se notifikace při dalším startu programu (nikdy " -"během užívání aplikace). Tento systém slouží pouze pro upozornění uživatele, " -"nedochází k automatické instalaci." +"Pokud je povoleno, kontroluje %s nově dostupné verze. V případě, že je nová verze k " +"dispozici, zobrazí se notifikace při dalším startu programu (nikdy během užívání " +"aplikace). Tento systém slouží pouze pro upozornění uživatele, nedochází k " +"automatické instalaci." msgid "" "If enabled, %s downloads updates of built-in system presets in the " @@ -3538,25 +4780,22 @@ msgid "" "startup." msgstr "" "Pokud je povoleno, stáhne %s na pozadí aktualizace vestavěných systémových " -"přednastavení. Tyto aktualizace jsou staženy do dočasného umístění. Pokud je " -"k dispozici nové přednastavení, zobrazí se upozornění při startu programu." - -msgid "If enabled, a repetition of the next random color will be allowed." -msgstr "Pokud je povoleno, bude povoleno opakování další náhodné barvy." +"přednastavení. Tyto aktualizace jsou staženy do dočasného umístění. Pokud je k " +"dispozici nové přednastavení, zobrazí se upozornění při startu programu." msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "" -"Pokud je tato možnost povolena, všechny tiskové extrudery na začátku tisku " -"vytlačí na předním okraji podložky malé množství materiálu." +"Pokud je tato možnost povolena, všechny tiskové extrudery na začátku tisku vytlačí " +"na předním okraji podložky malé množství materiálu." msgid "" "If enabled, allows the Reload from disk command to automatically find and " "load the files when invoked." msgstr "" -"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z " -"disku“ automaticky vyhledat a načíst soubory." +"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z disku“ " +"automaticky vyhledat a načíst soubory." msgid "" "If enabled, allows the Reload from disk command to automatically find and " @@ -3564,41 +4803,18 @@ msgid "" "If not enabled, the Reload from disk command will ask to select each file " "using an open file dialog." msgstr "" -"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z " -"disku“ automaticky vyhledat a načíst soubory.\n" -"Pokud není povoleno, funkce „Znovu načíst z disku“ požádá o zadání cest ke " -"každému souboru pomocí dialogového okna." - -msgid "" -"If enabled, application will use the standard Windows system menu,\n" -"but on some combination of display scales it can looks ugly. If disabled, " -"old UI will be used." -msgstr "" -"Pokud je povoleno, aplikace použije standardní systémovou nabídku Windows,\n" -"ale na některých měřítkách obrazovky to nemusí vypadat dobře. Pokud není " -"povoleno, použije se původní uživatelské rozhraní." +"Pokud je povoleno, v případě vyžádání, umožňuje funkci „Znovu načíst z disku“ " +"automaticky vyhledat a načíst soubory.\n" +"Pokud není povoleno, funkce „Znovu načíst z disku“ požádá o zadání cest ke každému " +"souboru pomocí dialogového okna." msgid "" "If enabled, changes made using the sequential slider, in preview, apply only " "to gcode top layer. If disabled, changes made using the sequential slider, " "in preview, apply to the whole gcode." msgstr "" -"Pokud je povoleno, pohyby sekvenčního posuvníku v náhledu gcodu se aplikují " -"pouze na horní vrstvu. Pokud je zakázáno, aplikují se na celý gcode." - -msgid "If enabled, PrusaSlicer will be open at the position it was closed" -msgstr "" -"Pokud je povoleno, PrusaSlicer se otevře na pozici, na které byl zavřen." - -msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser." -msgstr "" -"Pokud je tato funkce povolena, PrusaSlicer nebude v prohlížeči otevírat " -"hypertextové odkazy." - -msgid "If enabled, random sequence of the selected extruders will be used." -msgstr "" -"Pokud je tato možnost povolena, použije se náhodné pořadí vybraných " -"extruderů." +"Pokud je povoleno, pohyby sekvenčního posuvníku v náhledu G-codu se aplikují pouze " +"na horní vrstvu. Pokud je zakázáno, aplikují se na celý G-code." msgid "If enabled, renders object using the environment map." msgstr "Pokud je povoleno, vykreslí objekt za pomoci mapy prostředí." @@ -3606,12 +4822,17 @@ msgstr "Pokud je povoleno, vykreslí objekt za pomoci mapy prostředí." msgid "If enabled, reverses the direction of zoom with mouse wheel" msgstr "Pokud je povoleno, při zoomu obrátí funkci kolečka myši" -msgid "" -"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " -"will be used." +msgid "If enabled, sets %1% as default application to open .gcode files." msgstr "" -"Pokud je tato možnost povolena, budou karty Nastavení umístěny jako položky " -"nabídky. Pokud je zakázáno, bude použito původní uživatelské rozhraní." +"Pokud je povoleno, nastaví %1% jako výchozí aplikaci pro otevírání souborů .gcode." + +msgid "If enabled, sets Slic3r as default application to open .3mf files." +msgstr "" +"Pokud je povoleno, nastaví Slic3r jako výchozí aplikaci pro otevírání souborů .3mf." + +msgid "If enabled, sets Slic3r as default application to open .stl files." +msgstr "" +"Pokud je povoleno, nastaví Slic3r jako výchozí aplikaci pro otevírání souborů .stl." msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " @@ -3619,24 +4840,27 @@ msgid "" "When a new preset version becomes available it is offered at application " "startup." msgstr "" -"Pokud je povoleno, stáhne Slic3r na pozadí aktualizace vestavěných " -"systémových přednastavení. Tyto aktualizace jsou staženy do dočasného " -"umístění. Pokud je k dispozici nové přednastavení, zobrazí se upozornění při " -"startu programu." +"Pokud je povoleno, stáhne Slic3r na pozadí aktualizace vestavěných systémových " +"přednastavení. Tyto aktualizace jsou staženy do dočasného umístění. Pokud je k " +"dispozici nové přednastavení, zobrazí se upozornění při startu programu." msgid "" -"If enabled, the 3D scene will be rendered in Retina resolution. If you are " -"experiencing 3D performance problems, disabling this option may help." +"If enabled, Slic3r will check for the new versions of itself online. When a " +"new version becomes available a notification is displayed at the next " +"application startup (never during program usage). This is only a " +"notification mechanisms, no automatic installation is done." msgstr "" -"Pokud je tato volba povolena, bude 3D scéna vykreslena v rozlišení Retina. " -"Pokud dochází k potížím s výkonem, zkuste tuto volbu vypnout." +"Pokud je povoleno, kontroluje %s nově dostupné verze. V případě, že je nová verze k " +"dispozici, zobrazí se notifikace při dalším startu programu (nikdy během užívání " +"aplikace). Tento systém slouží pouze pro upozornění uživatele, nedochází k " +"automatické instalaci." msgid "" -"If enabled, the axes names and axes values will be colorized according to " -"the axes colors. If disabled, old UI will be used." +"If enabled, the 3D scene will be rendered in Retina resolution. If you are " +"experiencing 3D performance problems, disabling this option may help." msgstr "" -"Pokud je tato možnost povolena, názvy os a hodnoty os se zbarví podle barev " -"os. Pokud je vypnuto, bude použito staré uživatelské rozhraní." +"Pokud je tato volba povolena, bude 3D scéna vykreslena v rozlišení Retina. Pokud " +"dochází k potížím s výkonem, zkuste tuto volbu vypnout." msgid "" "If enabled, the button for the collapse sidebar will be appeared in top " @@ -3645,12 +4869,46 @@ msgstr "" "Pokud je povoleno, bude v pravém horním rohu 3D scény zobrazeno tlačítko pro " "ovládání bočního panelu" +msgid "" +"If enabled, the command line arguments are sent to an existing instance of " +"GUI Slic3r, or an existing Slic3r window is activated. Overrides the " +"\"single_instance\" configuration value from application preferences." +msgstr "" +"Pokud je povoleno, argumenty příkazového řádku se odesílají do existující instance " +"GUI Slic3r nebo existující okno Slic3r je aktivováno. Přepíše Hodnota konfigurace" +"\"single_instance\" z předvoleb aplikace." + +msgid "" +"If enabled, the descriptions of configuration parameters in settings tabs " +"wouldn't work as hyperlinks. If disabled, the descriptions of configuration " +"parameters in settings tabs will work as hyperlinks." +msgstr "" +"Pokud je zaškrtnuto, popisky konfiguračních parametrů na kartách nastavení nebudou " +"fungovat jako hypertextové odkazy. Pokud není zaškrtnuto, popisy konfiguračních " +"parametrů budou fungovat jako hypertextové odkazy." + +msgid "" +"If enabled, the gui will be in expert mode even if the simple or advanced " +"mode is selected (but not the setting tabs)." +msgstr "" +"Pokud je povoleno, gui bude v expertním režimu, i když jednoduchý nebo pokročilýje " +"vybrán režim (ale ne karty nastavení)." + msgid "" "If enabled, the legacy 3DConnexion devices settings dialog is available by " "pressing CTRL+M" msgstr "" -"Pokud je povoleno, je dialogové okno nastavení pro starší zařízení " -"3DConnexion k dispozici stisknutím kombinace kláves CTRL + M" +"Pokud je povoleno, je dialogové okno nastavení pro starší zařízení 3DConnexion k " +"dispozici stisknutím kombinace kláves CTRL + M" + +msgid "" +"If enabled, the skirt will be as tall as a highest printed object. This is " +"useful to protect an ABS or ASA print from warping and detaching from print " +"bed due to wind draft." +msgstr "" +"Pokud je tato možnost povolena, bude obrys (skirt) stejně vysoký jako nejvyšší " +"tištěný objekt. To je užitečné k ochraně modelu při tisku z ABS nebo ASA před " +"deformací a odlepením od tiskové podložky v důsledku průvanu." msgid "" "If enabled, the wipe tower will not be printed on layers with no " @@ -3658,54 +4916,100 @@ msgid "" "print the wipe tower. User is responsible for ensuring there is no collision " "with the print." msgstr "" -"Pokud je tato možnost povolena, nebude čistící věž vytištěna ve vrstvách bez " -"změny barvy. U vrstev s výměnou sjede extruder směrem dolů a vytiskne vrstvu " -"čistící věže. Uživatel je odpovědný za to, že nedojde ke kolizi tiskové " -"hlavy s tiskem." +"Pokud je tato možnost povolena, nebude čistící věž vytištěna ve vrstvách bez změny " +"barvy. U vrstev s výměnou sjede extruder směrem dolů a vytiskne vrstvu čistící " +"věže. Uživatel je odpovědný za to, že nedojde ke kolizi tiskové hlavy s tiskem." + +msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgstr "" +"Pokud je zaškrtnuto, použije „volnou kameru“. Pokud není, použije „omezenou " +"kameru“." msgid "" -"If enabled, UI will use Dark mode colors. If disabled, old UI will be used." +"If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "" -"Pokud je tato možnost povolena, bude uživatelské rozhraní používat tmavý " -"režim. Pokud je zakázáno, bude použito původní uživatelské rozhraní." +"Pokud je zaškrtnuto, použije perspektivní kameru. Pokud není, použije ortografickou " +"kameru." -msgid "If enabled, use free camera. If not enabled, use constrained camera." +msgid "If enabled, you can change size of toolbar icons manually." +msgstr "Pokud je zaškrtnuto, můžete nastavit velikost ikon na panelu nástrojů." + +msgid "" +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum for all infill print moves of the first layer.\n" +"If expressed as a percentage it will scale the current infill speed.\n" +"Set it at 100% to remove any infill first layer speed modification.\n" +"Set zero to disable (using first_layer_speed instead)." msgstr "" -"Pokud je zaškrtnuto, použije „free kameru“. Pokud není, použije " -"„constrained kameru“." +"Pokud je vyjádřena jako absolutní hodnota v mm/s, bude tato rychlost použita jako " +"maximum pro všechny výplňové tiskové pohyby první vrstvy.\n" +"Pokud je vyjádřeno v procentech, změní se aktuální rychlost výplně.\n" +"Nastavte jej na 100 %, abyste odstranili jakoukoli úpravu rychlosti první vrstvy " +"výplně.\n" +"Nastavte nulu na zakázání (místo toho použijte rychlost_první_vrstvay)." msgid "" -"If enabled, use perspective camera. If not enabled, use orthographic camera." +"If expressed as absolute value in mm/s, this speed will be applied as a " +"maximum to all the print moves (but infill) of the first layer.\n" +"If expressed as a percentage it will scale the current speed.\n" +"Set it at 100% to remove any first layer speed modification (but for infill)." msgstr "" -"Pokud je zaškrtnuto, použije perspektivní kameru. Pokud není, použije " -"ortografickou kameru." +"Pokud je vyjádřena jako absolutní hodnota v mm/s, bude tato rychlost použita jako " +"maximálně na všechny tiskové pohyby (kromě výplně) první vrstvy.\n" +"Pokud je vyjádřeno v procentech, změní se aktuální rychlost.\n" +"Nastavte jej na 100 % abyste odstranili jakoukoli úpravu rychlosti první vrstvy " +"(ale pro výplň)." -msgid "If enabled, useful hints are displayed at startup." +msgid "" +"If it point to a valid freecad instance (the bin directory or the python " +"executable), you can use the built-in python script to quickly generate " +"geometry." msgstr "" -"Pokud je tato možnost povolena, zobrazí se při spuštění aplikace užitečné " -"tipy." +"Pokud ukazuje na platnou instanci freecadu (adresář bin nebo python spustitelný, " +"můžete použít vestavěný skript python k rychlému vygenerování geometrie." msgid "" -"If enabled, volumes will be always ordered inside the object. Correct order " -"is Model Part, Negative Volume, Modifier, Support Blocker and Support " -"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " -"Modifiers. But one of the model parts have to be on the first place." +"If layer print time is estimated below this number of seconds, fan will be " +"enabled and its speed will be calculated by interpolating the default and " +"maximum speeds.\n" +"Set zero to disable." msgstr "" -"Pokud je tato volba povolena, objemy budou vždy umístěny uvnitř objektu. " -"Správné pořadí je Modely, Negativní objem, Modifikátor, Blokátor podpěr a " -"Vynucovatel podpěr. Je-li zakázáno, můžete změnit pořadí Modelů, Negativních " -"objemů a Modifikátorů. Jeden z modelů však musí být na prvním místě." +"Pokud je doba tisku vrstvy odhadována pod tento počet sekund, ventilátor bude " +"povoleno a jeho rychlost bude vypočítána interpolací výchozího nastavení a " +"maximální rychlosti.\n" +"Nastavit nulu pro zakázání." -msgid "If enabled, you can change size of toolbar icons manually." +msgid "" +"If layer print time is estimated below this number of seconds, print moves " +"speed will be scaled down to extend duration to this value, if possible.\n" +"Set zero to disable." +msgstr "" +"Pokud se doba tisku vrstvy odhaduje pod tento počet sekund, tisk se posunerychlost " +"bude zmenšena, aby se doba trvání prodloužila na tuto hodnotu, pokud je to možné.\n" +"Nastavit nulu pro zakázání." + +msgid "" +"If the perimeter overlap is set at 100%, the yellow areas should be filled " +"by the overlap.\n" +"If overlap is at 0%, width = spacing." msgstr "" -"Pokud je zaškrtnuto, můžete nastavit velikost ikon na panelu nástrojů." +"Pokud je překrytí perimetru nastaveno na 100 %, žluté oblasti by měly být " +"vyplněnypřekrytím.\n" +"Pokud je překrytí 0 %, šířka = mezera." + +msgid "" +"If this is enabled, fan will continuously run at base speed if no other " +"setting overrides that speed. Useful for PLA, harmful for ABS." +msgstr "" +"Pokud je toto povoleno, ventilátor poběží nepřetržitě základní rychlostí, pokud " +"žádná jinánastavení přepíše tuto rychlost. Užitečné pro PLA, škodlivé pro ABS." msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "" -"Pokud je tato možnost povolena, Slic3r bude automaticky centrovat objekty " -"kolem středu tiskové plochy." +"Pokud je tato možnost povolena, Slic3r bude automaticky centrovat objekty kolem " +"středu tiskové plochy." msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " @@ -3714,38 +5018,56 @@ msgstr "" "Pokud je tato možnost povolena, Slic3r předprojektuje objekty, jakmile budou " "načteny, aby šetřil čas při exportu G-code." +msgid "" +"If this is enabled, Slic3r will prompt for when overwriting files from save " +"dialogs." +msgstr "" +"Pokud je toto povoleno, Slic3r zobrazí výzvu k přepsání souborů z uloženídialogy." + msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" -"Pokud je tato volba povolena, Slic3r vyvolá poslední výstupní adresář " -"namísto toho, který obsahuje vstupní soubory." +"Pokud je tato volba povolena, Slic3r vyvolá poslední výstupní adresář namísto toho, " +"který obsahuje vstupní soubory." + +msgid "" +"If this is enabled, when starting Slic3r and another instance of the same " +"Slic3r is already running, that instance will be reactivated instead." +msgstr "" +"Pokud je toto povoleno, při spuštění Slic3r a další instance stejného Slic3r již " +"běží, tato instance bude místo toho znovu aktivována." + +msgid "" +"If you have some problem with the 'Only one perimeter on Top surfaces' " +"option, you can try to activate this on the problematic layer." +msgstr "" +"Pokud máte nějaký problém s 'Pouze jeden perimetr na horních plochách'možnost, " +"můžete to zkusit aktivovat na problematické vrstvě." msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" -"Zadáním kladné hodnoty, se Z rychle přizvedne při každém vyvolání retrakce. " -"Při použití více extruderů bude použito pouze nastavení pro první extruder." +"Zadáním kladné hodnoty, se Z rychle přizvedne při každém vyvolání retrakce. Při " +"použití více extruderů bude použito pouze nastavení pro první extruder." msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" -"Zadáním kladné hodnoty se zdvih Z uskuteční pouze nad zadanou absolutní " -"hodnotou Z. Toto nastavení můžete zvolit pro přeskočení přizvednutí u " -"prvních vrstev." +"Zadáním kladné hodnoty se zdvih Z uskuteční pouze nad zadanou absolutní hodnotou Z. " +"Toto nastavení můžete zvolit pro přeskočení přizvednutí u prvních vrstev." msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" -"Zadáním kladné hodnoty se zdvih Z uskuteční pouze pod zadanou absolutní " -"hodnotou Z. Toto nastavení můžete zvolit pro přeskočení přizvednutí u " -"prvních vrstev." +"Zadáním kladné hodnoty se zdvih Z uskuteční pouze pod zadanou absolutní hodnotou Z. " +"Toto nastavení můžete zvolit pro přeskočení přizvednutí u prvních vrstev." msgid "" "If you want to process the output G-code through custom scripts, just list " @@ -3754,10 +5076,10 @@ msgid "" "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" -"Pokud chcete zpracovat výstupní G-code pomocí vlastních skriptů, stačí zde " -"uvést jejich absolutní cesty. Oddělte více skriptů středníkem. Skripty " -"předají absolutní cestu k souboru G-code jako první argument a mohou " -"přistupovat k nastavení konfigurace Slic3ru čtením proměnných prostředí." +"Pokud chcete zpracovat výstupní G-code pomocí vlastních skriptů, stačí zde uvést " +"jejich absolutní cesty. Oddělte více skriptů středníkem. Skripty předají absolutní " +"cestu k souboru G-code jako první argument a mohou přistupovat k nastavení " +"konfigurace Slic3ru čtením proměnných prostředí." msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" @@ -3765,29 +5087,34 @@ msgid "" "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" -"Pokud firmware nezpracovává umístění extruderu správně, potřebujete aby to " -"vzal G-code v úvahu. Toto nastavení umožňuje určit odsazení každého " -"extruderu vzhledem k prvnímu. Očekávají se pozitivní souřadnice (budou " -"odečteny od souřadnice XY)." +"Pokud firmware nezpracovává umístění extruderu správně, potřebujete aby to vzal G-" +"code v úvahu. Toto nastavení umožňuje určit odsazení každého extruderu vzhledem k " +"prvnímu. Očekávají se pozitivní souřadnice (budou odečteny od souřadnice XY)." msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" -"Pokud váš firmware vyžaduje relativní hodnoty E, zaškrtněte toto, jinak " -"nechte nezaškrtnuté. Většina firmwarů používá absolutní hodnoty." - -msgid "Ignore HTTPS certificate revocation checks" -msgstr "Ignorování kontrol revokace HTTPS certifikátu" +"Pokud váš firmware vyžaduje relativní hodnoty E, zaškrtněte toto, jinak nechte " +"nezaškrtnuté. Většina firmwarů používá absolutní hodnoty." msgid "" -"Ignore HTTPS certificate revocation checks in case of missing or offline " -"distribution points. One may want to enable this option for self signed " -"certificates if connection fails." +"If your firmware stops while printing, it may have its gcode queue full. Set " +"this parameter to merge extrusions into bigger ones to reduce the number of " +"gcode commands the printer has to process each second.\n" +"On 8bit controlers, a value of 150 is typical.\n" +"Note that reducing your printing speed (at least for the external " +"extrusions) will reduce the number of time this will triggger and so " +"increase quality.\n" +"Set zero to disable." msgstr "" -"Ignorování kontrol revokace HTTPS certifikátu v případě chybějících nebo " -"offline distribučních bodů. Tuto možnost lze povolit pro certifikáty " -"podepsané vlastním podpisem v případě, že se připojení nezdaří." +"Pokud se váš firmware během tisku zastaví, může mít frontu gcode plnou. Set tento " +"parametr pro sloučení vysunutí do větších, aby se snížil počet příkazy gcode, které " +"musí tiskárna každou sekundu zpracovat.\n" +"U 8bitových ovladačů je typická hodnota 150.\n" +"Všimněte si, že snížení rychlosti tisku (alespoň pro vnější extruze) zkrátí dobu, " +"po kterou se to spustí, a tak zvýšit kvalitu.\n" +"Nastavit nulu pro zakázání." msgid "Ignore non-existent config files" msgstr "Ignorovat neexistující konfigurační soubory" @@ -3795,11 +5122,11 @@ msgstr "Ignorovat neexistující konfigurační soubory" msgid "Ignores facets facing away from the camera." msgstr "Ignoruje fasety směřující pryč od kamery." -msgid "Illegal instruction" -msgstr "Nepovolený příkaz" +msgid "Illegal characters" +msgstr "Zakázané znaky" -msgid "Import" -msgstr "Importovat" +msgid "Illegal characters for filename" +msgstr "Neplatné znaky pro název souboru" msgid "Import &Config" msgstr "Importovat Konfigura&ci" @@ -3807,8 +5134,8 @@ msgstr "Importovat Konfigura&ci" msgid "Import Config &Bundle" msgstr "Importovat Konfigurační &Balík" -msgid "Import Config from &Project" -msgstr "Načíst konfiguraci z &Projektu" +msgid "Import Config from &project" +msgstr "Načíst konfiguraci z &projektu" msgid "Import Config from ini/amf/3mf/gcode" msgstr "Načíst konfiguraci ze souboru ini/amf/3mf/gcode" @@ -3840,18 +5167,27 @@ msgstr "Import opraveného 3MF souboru selhal" msgid "Import profile only" msgstr "Importovat pouze profil" -msgid "Import SL1 / SL1S Archive" -msgstr "Importovat SL1 / SL1S Archiv" +msgid "Import Prusa Config" +msgstr "Importovat Konfiguraci" + +msgid "Import Prusa Config Bundle" +msgstr "Exportovat Konfigurační Balík" + +msgid "Import SL1 / SL1S archive" +msgstr "Importovat archiv SL1 / SL1S" msgid "Import SLA archive" msgstr "Importovat SLA archiv" -msgid "Import STL (Imperial Units)" +msgid "Import STL (imperial units)" msgstr "Importovat STL (imperiální jednotky)" msgid "Import STL/OBJ/AM&F/3MF" msgstr "Importovat STL/OBJ/AM&F/3MF" +msgid "Import STL/OBJ/AMF/3MF without config, keep platter" +msgstr "Importovat STL/OBJ/AMF/3MF bez konfigurace, ponechat talíř" + msgid "Importing canceled." msgstr "Import zrušen." @@ -3862,14 +5198,44 @@ msgid "Importing SLA archive" msgstr "Importuje se SLA archiv" msgid "in" -msgstr "in" - -msgid "In the custom G-code were found reserved keywords:" -msgstr "Ve vlastním G-kódu byla nalezena vyhrazená klíčová slova:" +msgstr "v" + +msgid "" +"In sloping areas, when you have a number of top / bottom solid layers and " +"few perimeters, it may be necessary to put some solid infill above/below " +"the perimeters to fulfill the top/bottom layers criteria.\n" +"By setting this to something higher than 0, you can control this behaviour, " +"which might be desirable if \n" +"undesirable solid infill is being generated on slopes.\n" +"The number set here indicates the number of layers between the inside of the " +"part and the air at and beyond which solid infill should no longer be added " +"above/below. If this setting is equal or higher than the top/bottom solid " +"layer count, it won't do anything. If this setting is set to 1, it will " +"evict all solid fill above/below perimeters. \n" +"Set zero to disable.\n" +"!! ensure_vertical_shell_thickness needs to be activated so this algorithm " +"can work !!." +msgstr "" +"V šikmých oblastech, když máte několik horních / spodních plných vrstev a málo " +"perimetrů, může být nutné dát nějakou pevnou výplň nad/pod perimetry pro splnění " +"kritérií horní/spodní vrstvy.\n" +"Pokud toto nastavíte na něco vyššího než 0, můžete toto chování ovládat,což by " +"mohlo být žádoucí, pokud \n" +"na svazích se vytváří nežádoucí pevná výplň.\n" +"Číslo zde nastavené udává počet vrstev mezi vnitřkem část a vzduch, na který a za " +"nímž by se již neměla přidávat pevná výplňnad/pod. Pokud je toto nastavení stejné " +"nebo vyšší než horní/dolní plné počet vrstev, nic to neudělá. Pokud je toto " +"nastavení nastaveno na 1, vykliďte veškerou pevnou výplň nad/pod perimetry. \n" +"Nastavit nulu pro zakázání.\n" +"!! secure_vertical_shell_thickness musí být aktivován, takže tento algoritmus může " +"fungovat!!." msgid "In this mode you can select only other %s Items%s" msgstr "V tomto režimu můžete vybrat pouze jinou/jiný %s %s" +msgid "In vase mode (no seam)" +msgstr "V režimu vázy (bez švu)" + msgid "Inches" msgstr "Palce" @@ -3888,6 +5254,9 @@ msgstr "Přidání Instancí" msgid "Increase/decrease edit area" msgstr "Zvětšit / zmenšit oblast úprav" +msgid "increment" +msgstr "Přírůstek" + msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" @@ -3896,15 +5265,15 @@ msgid "" msgstr "" "indikuje, že některá nastavení byla změněna a nejsou shodná se systémovými " "(výchozími) hodnotami pro danou skupinu nastavení.\n" -"Klikněte na ikonu ODEMKNUTÉHO ZÁMKU pro reset všech nastavení aktuální " -"skupiny nastavení na systémové (nebo výchozí) hodnoty." +"Klikněte na ikonu ODEMKNUTÉHO ZÁMKU pro reset všech nastavení aktuální skupiny " +"nastavení na systémové (nebo výchozí) hodnoty." msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "" -"indikuje, že nastavení jsou stejná jako systémové (výchozí) hodnoty pro " -"aktuální skupinu nastavení" +"indikuje, že nastavení jsou stejná jako systémové (výchozí) hodnoty pro aktuální " +"skupinu nastavení" msgid "" "indicates that the settings were changed and are not equal to the last saved " @@ -3912,8 +5281,8 @@ msgid "" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" -"indikuje, že došlo ke změně nastavení, které není shodné s naposledy " -"uloženým přednastavením pro aktuální skupinu nastavení.\n" +"indikuje, že došlo ke změně nastavení, které není shodné s naposledy uloženým " +"přednastavením pro aktuální skupinu nastavení.\n" "Klikněte na ikonu ŠIPKY ZPĚT pro reset všech nastavení pro aktuální skupinu " "nastavení na naposledy uložené přednastavení." @@ -3921,14 +5290,41 @@ msgid "Infill" msgstr "Výplň" msgid "infill" -msgstr "výplň" +msgstr "Výplň" + +msgid "Infill acceleration" +msgstr "Zrychlení výplně" msgid "Infill before perimeters" msgstr "Tisknout výplň před tiskem perimetrů" +msgid "Infill bridges" +msgstr "Výplň mostů" + +msgid "Infill bridges fan speed" +msgstr "Rychlost ventilátoru výplní mostů" + msgid "Infill extruder" msgstr "Extruder pro výplň" +msgid "Infill max first layer speed" +msgstr "Max rychlost vyplnění první vrstvy" + +msgid "Infill spacing" +msgstr "Mezery výplně" + +msgid "Infill speed" +msgstr "Rychlost výplně" + +msgid "Infill width" +msgstr "Šířka výplně" + +msgid "Infill/perimeters encroachment" +msgstr "Přesah pro výplně/perimetry" + +msgid "Infilling layer %s / %s" +msgstr "Vyplňování vrstvy %s / %s" + msgid "Infilling layers" msgstr "Generování výplně vrstev" @@ -3950,8 +5346,11 @@ msgstr "Doba počátečního osvitu" msgid "Initial layer height" msgstr "Výška první vrstvy" -msgid "Inner brim only" -msgstr "Pouze vnitřní límec" +msgid "Inner" +msgstr "Vnitřní" + +msgid "Inner XY size compensation" +msgstr "Vnitřní kompenzace velikosti XY" msgid "Input value is out of range" msgstr "Zadaná hodnota je mimo rozsah" @@ -3963,6 +5362,9 @@ msgstr "" "Vstupní hodnota je mimo povolený rozsah\n" "Jste si jisti, že %s je správná hodnota a že chcete pokračovat?" +msgid "Insertion distance" +msgstr "Vzdálenost vložení" + msgid "Inspect / activate configuration snapshots" msgstr "Zkontrolovat / aktivovat zálohy konfigurace" @@ -3981,6 +5383,12 @@ msgstr "Instance" msgid "Instances to Separated Objects" msgstr "Změna instance na samostatný objekt" +msgid "Interface" +msgstr "Kontaktní vrstvy" + +msgid "Interface layers" +msgstr "Kontaktní vrstvy" + msgid "Interface loops" msgstr "Kontaktní smyčky" @@ -3990,15 +5398,54 @@ msgstr "Rozteč kontaktních vrstev" msgid "Interface shells" msgstr "Mezilehlé stěny" +msgid "Interior Brim width" +msgstr "Vnitřní šířka límce" + +msgid "Internal" +msgstr "Vnitřní" + +msgid "Internal bridge infill" +msgstr "Vnitřní výplň mostu" + +msgid "Internal bridge speed" +msgstr "Vnitřní rychlost mostu" + +msgid "Internal bridges" +msgstr "Vnitřní mosty" + msgid "internal error" msgstr "interní chyba" -msgid "Internal error: %1%" -msgstr "Vnitřní chyba: %1%" - msgid "Internal infill" msgstr "Vnitřní výplň" +msgid "Internal perimeter" +msgstr "Vnitřní perimetr" + +msgid "Internal perimeters speed" +msgstr "Rychlost vnitřních perimetrů" + +msgid "" +"Internal perimeters will go around sharp corners by turning around instead " +"of making the same sharp corner. This can help when there are visible holes " +"in sharp corners on perimeters. It also help to print the letters on the " +"benchy stern.\n" +"Can incur some more processing time, and corners are a bit less sharp." +msgstr "" +"Vnitřní perimetry budou obcházet ostré rohy tím, že se místo toho otočívytvoření " +"stejného ostrého rohu. To může pomoci, když jsou viditelné díryv ostrých rozích na " +"perimetrech. Pomáhá také tisknout písmena na lavičková záď.\n" +"Může trvat delší dobu zpracování a rohy jsou o něco méně ostré." + +msgid "Internal resolution" +msgstr "Interní rozlišení" + +msgid "Introduction" +msgstr "Úvod" + +msgid "Invalid" +msgstr "Neplatný" + msgid "Invalid data" msgstr "Neplatná data" @@ -4018,8 +5465,7 @@ msgid "" "Invalid input format. Expected vector of dimensions in the following format: " "\"%1%\"" msgstr "" -"Neplatný vstupní formát. Očekává se vektor rozměrů v následujícím formátu: " -"\"%1%\"" +"Neplatný vstupní formát. Očekává se vektor rozměrů v následujícím formátu: \"%1%\"" msgid "Invalid numeric input." msgstr "Neplatný číselný vstup." @@ -4033,8 +5479,43 @@ msgstr "Průměr hrotu podpěry je neplatný" msgid "Ironing" msgstr "Ironing" +msgid "Ironing angle" +msgstr "Úhel ironing" + +msgid "Ironing angle. if negative, it will use the fill angle." +msgstr "Úhel ironing. je-li záporný, použije úhel výplně." + +msgid "Ironing flow distribution" +msgstr "Rozdělení proudu ironing" + +msgid "Ironing infill pattern tuning" +msgstr "Ladění vzoru výplně ironing" + +msgid "Ironing pattern calibration" +msgstr "Kalibrace vzoru ironing" + +msgid "Ironing post-process (This will go on top of infills and perimeters)" +msgstr "Následný proces ironing (bude pokračovat na výplních a perimetrech)" + +msgid "Ironing speed" +msgstr "Rychlost ironing" + +msgid "" +"Ironing speed. Used for the ironing pass of the ironing infill pattern, and " +"the post-process infill. Can be defined as mm.s, or a % of the top solid " +"infill speed.\n" +"Ironing extrusions are ignored from the automatic volumetric speed " +"computation." +msgstr "" +"Rychlost ironing. Používá se pro ironing průchod vzoru ironing výplně a výplň po " +"zpracování. Může být definována jako mm.s nebo % horního tělesa rychlost výplně.\n" +"Výlisky na ironing jsou ignorovány z automatické objemové rychlosti výpočet." + msgid "Ironing Type" -msgstr "Způsob vyhlazování" +msgstr "Způsob Ironing" + +msgid "Ironing width" +msgstr "Šířka ironing" msgid "is licensed under the" msgstr "je licencován pod" @@ -4048,14 +5529,17 @@ msgstr "Izometrické zobrazení" msgid "It can't be deleted or modified." msgstr "Nelze smazat nebo upravit." +msgid "It is not allowed to change the file to reload" +msgstr "Není možné změnit soubor, který má být znovu načten" + msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" -"Může být užitečné zvýšit proud motoru extruderu během sekvence výměny " -"filamentu, aby se umožnily vysoké rychlosti zavádění filamentu a aby se " -"překonal odpor při zavádění filamentu s ošklivě tvarovanou špičkou." +"Může být užitečné zvýšit proud motoru extruderu během sekvence výměny filamentu, " +"aby se umožnily vysoké rychlosti zavádění filamentu a aby se překonal odpor při " +"zavádění filamentu s ošklivě tvarovanou špičkou." msgid "It's a last preset for this physical printer." msgstr "Toto je poslední přednastavení pro tuto fyzickou tiskárnu." @@ -4066,12 +5550,29 @@ msgstr "SLA technologií nelze tisknout vícedílné objekty." msgid "It's not possible to delete the last related preset for the printer." msgstr "Není možné odstranit poslední související přednastavení tiskárny." +msgid "" +"It's not possible to use a bigger value for the brim offset than the brim " +"width, as it won't extrude anything. Brim offset have to be lower than the " +"brim width." +msgstr "" +"Není možné použít větší hodnotu pro odsazení okraje než okrajšířka, protože nebude " +"nic vytlačovat. Odsazení okraje musí být nižší než šířka okraje." + msgid "Jerk limits" -msgstr "Ryv limity" +msgstr "Jerk (Ryv) limity" msgid "Jitter" msgstr "Rozkmit (Jitter)" +msgid "" +"Join the perimeters to create only one continuous extrusion without any z-" +"hop. Long inside travel (from external to holes) are not extruded to give " +"some space to the infill." +msgstr "" +"Spojte perimetry, abyste vytvořili pouze jedno souvislé vysunutí bez jakéhokoli z-" +"hop. Dlouhé vnitřní dráhy (od vnějších k otvorům) nejsou vytlačovány, aby nějaký " +"prostor k výplni." + msgid "Jump to height" msgstr "Přechod do výšky" @@ -4097,8 +5598,8 @@ msgstr "Přechod na pohyb v rámci vrstvy" msgid "Just switch to \"%1%\" preset" msgstr "Pouze se přepnout do profilu \"%1%\"" -msgid "Keep" -msgstr "Ponechat" +msgid "Keep bridges and overhangs" +msgstr "Zachovat mosty a převisy" msgid "Keep fan always on" msgstr "Ventilátor vždy zapnutý" @@ -4109,8 +5610,8 @@ msgstr "Zachovat spodní část" msgid "Keep min" msgstr "Zachovat minima" -msgid "Keep the selected settings." -msgstr "Zachovejte vybraná nastavení." +msgid "Keep only bridges" +msgstr "Nechte si jen mosty" msgid "Keep upper part" msgstr "Zachovat horní část" @@ -4124,6 +5625,9 @@ msgstr "Klávesové zkratky" msgid "kg" msgstr "kg" +msgid "Kickstart duration" +msgstr "Trvání počátečního startu" + msgid "Label objects" msgstr "Označování objektů" @@ -4145,21 +5649,36 @@ msgstr "Vrstva" msgid "Layer height" msgstr "Výška vrstvy" -msgid "" -"Layer height is not valid.\n" -"\n" -"The layer height will be reset to 0.01." -msgstr "" -"Výška vrstvy není platná.\n" -"\n" -"Výška vrstvy bude resetována na 0,01." +msgid "Layer height can't be greater than %s" +msgstr "Výška vrstvy nemůže být větší než %s" + +msgid "Layer height can't be higher than %s" +msgstr "Výška vrstvy nemůže být vyšší než %s" msgid "Layer height limits" msgstr "Výškové limity vrstvy" +msgid "Layer previe&w Tab" +msgstr "Karta Náhled na Slicování" + msgid "Layer range Settings to modify" msgstr "Nastavení pro vrstvy v rozsahu" +msgid "Layer Time" +msgstr "Čas vrstvy" + +msgid "Layer time" +msgstr "Čas vrstvy" + +msgid "Layer Time (log)" +msgstr "Čas vrstvy (protokol)" + +msgid "Layer time (log)" +msgstr "Čas vrstvy (protokol)" + +msgid "Layer time goal" +msgstr "Čas vrstvy" + msgid "layers" msgstr "vrstva(y)" @@ -4169,8 +5688,17 @@ msgstr "Vrstvy" msgid "Layers and perimeters" msgstr "Vrstvy a perimetry" -msgid "Leave \"%1%\" enabled" -msgstr "Ponechat možnost \"%1%\" povolenou" +msgid "Layout Options" +msgstr "Možnosti rozložení" + +msgid "Layout with the tab bar" +msgstr "Rozvržení s lištou karet" + +msgid "Leaving Paint-on supports" +msgstr "Opuštění Malování podpěr" + +msgid "Leaving Seam painting" +msgstr "Opuštění Malování švu" msgid "Left" msgstr "Zleva" @@ -4184,12 +5712,15 @@ msgstr "Levé tlačítko myši" msgid "Left mouse button:" msgstr "Levé tlačítko myši:" -msgid "Left Preset Value" -msgstr "Hodnota levého přednastavení" - msgid "Left View" msgstr "Pohled zleva" +msgid "Legacy layout" +msgstr "Starší rozvržení" + +msgid "Legend" +msgstr "Legenda" + msgid "Legend/Estimated printing time" msgstr "Legenda / Odhadovaný čas tisku" @@ -4198,8 +5729,8 @@ msgstr "Vzdálenost" msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "" -"Délka kovové trubičky určené pro ochlazení a zformování filamentu po " -"vytažení z extruderu." +"Délka kovové trubičky určené pro ochlazení a zformování filamentu po vytažení z " +"extruderu." msgid "Length of the infill anchor" msgstr "Délka výplňové kotvy" @@ -4208,28 +5739,101 @@ msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "" -"Licenční ujednání všech následujících programů (knihoven) je součástí " -"licenční smlouvy" +"Licenční ujednání všech následujících programů (knihoven) je součástí licenční " +"smlouvy" -msgid "" -"Lift the object above the bed when it is partially below. Enabled by " -"default, use --no-ensure-on-bed to disable." -msgstr "" -"Zvedne objekt nad podložku v případě, pokud je je částečně pod ním. Ve " -"výchozím nastavení povoleno, pro zakázání použijte --no-ensure-on-bed." +msgid "Lift only on" +msgstr "Pouze zvedání" msgid "Lift Z" msgstr "Zvednout Z" -msgid "Lightning" -msgstr "Lightning" +msgid "Lift z enforcement" +msgstr "Vynucení zvednutí Z" -msgid "Limited" -msgstr "Omezené" +msgid "Light color, in the RGB hex format." +msgstr "Světlá barva, v hexadecimálním formátu RGB." + +msgid "Light gui color" +msgstr "Světlá barva gui" + +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Jako šířka první vrstvy, ale mezera je vzdálenost mezi dvěma řádky (jako trochu se " +"překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Like First layer width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Jako šířka první vrstvy, ale mezera je vzdálenost mezi dvěma řádky (jako trochu se " +"překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí procenta " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"Like Perimeter width but spacing is the distance between two perimeter lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Jako šířka perimetru, ale mezera je vzdálenost mezi dvěma obvodovými čarami(jak se " +"trochu překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí procenta " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"Like Solid infill width but spacing is the distance between two lines (as " +"they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Jako šířka výplně Solid, ale mezera je vzdálenost mezi dvěma řádky (jako trochu se " +"překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Like the External perimeters width, but this value is the distance between " +"the edge and the 'frontier' to the next perimeter.\n" +"Setting the spacing will deactivate the width setting, and vice versa.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Stejně jako šířka vnějšího perimetru, ale tato hodnota je vzdálenost mezi okraj a " +"'hranice' k dalšímu perimetru.\n" +"Nastavením mezery deaktivujete nastavení šířky a naopak.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí procenta " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"Like Top solid infill width but spacing is the distance between two lines " +"(as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Jako šířka horní plné výplně, ale mezera je vzdálenost mezi dvěma řádky(jak se " +"trochu překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána,pomocí výchozí " +"výšky vrstvy." msgid "Line" msgstr "Čára" +msgid "Linear" +msgstr "Čára" + +msgid "lines" +msgstr "čára" + msgid "Load" msgstr "Načíst" @@ -4247,14 +5851,17 @@ msgid "" "maintaining different profiles or including configurations from a network " "storage." msgstr "" -"Načtěte a uložte nastavení z/do daného adresáře. To je užitečné pro " -"udržování různých profilů nebo konfigurací ze síťového úložiště." +"Načtěte a uložte nastavení z/do daného adresáře. To je užitečné pro udržování " +"různých profilů nebo konfigurací ze síťového úložiště." msgid "Load config file" msgstr "Načíst konfigurační soubor" msgid "Load Config from ini/amf/3mf/gcode and merge" -msgstr "Načíst konfiguraci zesouboru ini/amf/3mf/gcode a sloučit" +msgstr "Načíst konfiguraci ze souboru ini/amf/3mf/gcode a sloučit" + +msgid "Load configuration file exported from PrusaSlicer" +msgstr "Načíst konfigurační soubor exportovaný z PrusaSlicer" msgid "Load configuration from project file" msgstr "Načíst konfiguraci z projektu" @@ -4263,8 +5870,8 @@ msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "" -"Načíst konfiguraci ze zadaného souboru. Může být použito vícekrát než jednou " -"pro načtení z více souborů." +"Načíst konfiguraci ze zadaného souboru. Může být použito vícekrát než jednou pro " +"načtení z více souborů." msgid "Load exported configuration file" msgstr "Načíst exportovaný konfigurační soubor" @@ -4275,15 +5882,15 @@ msgstr "Načíst soubor" msgid "Load Files" msgstr "Načíst soubory" -msgid "Load Modifier" -msgstr "Načíst Modifikátor" - msgid "Load Part" msgstr "Přidání části" msgid "Load presets from a bundle" msgstr "Načíst přednastavení z balíku" +msgid "Load presets from a PrusaSlicer bundle" +msgstr "Načíst předvolby z balíčku PrusaSlicer" + msgid "Load Project" msgstr "Načíst Projekt" @@ -4293,30 +5900,21 @@ msgstr "Načíst tvar ze souboru STL…" msgid "Load..." msgstr "Načíst..." +msgid "Loaded" +msgstr "Načteno" + msgid "loaded" msgstr "zaváděn" msgid "Loading" msgstr "Načítání" -msgid "Loading a configuration snapshot" -msgstr "Načítání konfiguračního snapshotu" - -msgid "Loading a new project while the current project is modified." -msgstr "Načítání nového projektu. Současný projekt byl změněn." - msgid "Loading configuration" msgstr "Načítání konfigurace" msgid "Loading file" msgstr "Načítání souboru" -msgid "Loading of a configuration bundle" -msgstr "Načítání konfiguračního balíku" - -msgid "Loading of a configuration file" -msgstr "Načítání konfiguračního souboru" - msgid "Loading of a mode view" msgstr "Načítání režimu zobrazení" @@ -4345,15 +5943,18 @@ msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "" -"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že nastavení jsou stejná jako systémové " -"(nebo výchozí) hodnoty pro aktuální skupinu nastavení" +"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že nastavení jsou stejná jako systémové (nebo " +"výchozí) hodnoty pro aktuální skupinu nastavení" msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "" -"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že hodnota je shodná se systémovou " -"(výchozí) hodnotou." +"Ikona ZAMKNUTÉHO ZÁMKU indikuje, že hodnota je shodná se systémovou (výchozí) " +"hodnotou." + +msgid "Log time" +msgstr "Čas přihlášení" msgid "Logging level" msgstr "Úroveň logování" @@ -4361,74 +5962,186 @@ msgstr "Úroveň logování" msgid "Loops (minimum)" msgstr "Smyček (minimálně)" -msgid "Lowest Z height" -msgstr "Nejnižší výška v ose Z" +msgid "Lower layer" +msgstr "Spodní vrstva" -msgid "Machine limits" -msgstr "Limity stroje" +msgid "Lower Layer" +msgstr "Spodní Vrstva" + +msgid "lowest Y" +msgstr "nejnižší Y" + +msgid "lowest Z" +msgstr "nejnižší Z" + +msgid "M117" +msgstr "M117" + +msgid "M73" +msgstr "M73" msgid "" -"Make sure the object is printable. This is usually caused by negligibly " -"small extrusions or by a faulty model. Try to repair the model or change its " -"orientation on the bed." +"M73: Emit M73 P{percent printed} R{remaining time in minutes} at 1 minute " +"intervals into the G-code to let the firmware show accurate remaining time. " +"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " +"firmware supports M73 Qxx Sxx for the silent mode.\n" +"M117: Send a command to display a message to the printer, this is 'Time " +"Left .h..m..s'." msgstr "" -"Ujistěte se, že je objekt tisknutelný. Bývá to způsobeno zanedbatelně malými " -"extruzemi nebo vadným modelem. Zkuste model opravit nebo změnit jeho " -"orientaci na podložce." +"M73: Emit M73 P{procento vytištěno} R{zbývající čas v minutách} v 1 minutěintervaly " +"do G-kódu, aby firmware ukazoval přesný zbývající čas.V tuto chvíli pouze firmware " +"Prusa i3 MK3 rozpoznává M73. Také i3 MK3firmware podporuje M73 Qxx Sxx pro tichý " +"režim.\n" +"M117: Odešlete příkaz k zobrazení zprávy do tiskárny, toto je 'Čas Doleva .h..m..s'." + +msgid "Machine limits" +msgstr "Limity stroje" + +msgid "Machine Limits" +msgstr "Limity stroje" + +msgid "Machine limits are disabled. They are not used for anything." +msgstr "Strojové limity jsou deaktivovány. K ničemu se nepoužívají." + +msgid "Machine limits are used as safegard when generating gcode" +msgstr "Limity stroje se používají jako ochrana při generování gcode" + +msgid "" +"Machine limits will be emitted to G-code and used to estimate print time. " +"They are also used as safegard when generating gcode" +msgstr "" +"Limity stroje budou vysílány do G-kódu a použity k odhadu doby tisku.Používají se " +"také jako ochrana při generování gcode" + +msgid "" +"Machine limits will NOT be emitted to G-code, however they will be used to " +"estimate print time, which may therefore not be accurate as the printer may " +"apply a different set of machine limits. They are also used as safegard when " +"generating gcode" +msgstr "" +"Limity strojů NEBUDOU vysílány do G-kódu, ale budou použity k odhadněte dobu tisku, " +"která proto nemusí být přesná, protože tiskárna můžepoužijte jinou sadu limitů " +"stroje. Používají se také jako ochrana, když generování gcode" + +msgid "Main color, in the RGB hex format." +msgstr "Hlavní barva, v hexadecimálním formátu RGB." + +msgid "Main GUI always in expert mode" +msgstr "Hlavní GUI vždy v expertním režimu" + +msgid "Mainly used as background or dark text color." +msgstr "Používá se hlavně jako barva pozadí nebo tmavého textu." + +msgid "Mainly used as icon color." +msgstr "Používá se hlavně jako barva ikony." + +msgid "Mainly used as light text color." +msgstr "Používá se hlavně jako světlá barva textu." + +msgid "Manifold" +msgstr "Model OK" + +msgid "Manual by Gary Hodgson. Inspired by the RepRap community." +msgstr "Manuál od Garyho Hodgsona. Inspirováno komunitou RepRap." msgid "Manual editing" msgstr "Manuální úprava" +msgid "Marker" +msgstr "Popisovač" + +msgid "Masked CWS" +msgstr "Maskovaný CWS" + msgid "Masked SLA file exported to %1%" msgstr "Soubor pro SLA byl exportován do %1%" -msgid "Match single line" -msgstr "Shoda na jednom řádku" - msgid "Mate&rial Settings Tab" -msgstr "Panel Nastavení mate&riálu" +msgstr "Panel Nastavení Mate&riálu" msgid "Material" msgstr "Materiál" -msgid "Material printing profile" -msgstr "Profil tiskového materiálu" - msgid "Material Settings" msgstr "Nastavení materiálu" msgid "Material Settings Tab" -msgstr "Panel Nastavení materiálu" +msgstr "Panel Nastavení Materiálu" + +msgid "material_correction" +msgstr "materiál_korekce" + +msgid "Materials" +msgstr "Materiálů" msgid "Max" -msgstr "Maximum" +msgstr "Max" + +msgid "max %s version" +msgstr "max %s verze" + +msgid "Max angle" +msgstr "Max úhel" + +msgid "Max bridge density" +msgstr "Max hustota mostu" msgid "Max bridge length" -msgstr "Maximální délka mostu" +msgstr "Max délka mostu" msgid "Max bridges on a pillar" msgstr "Max počet mostů na sloupu" +msgid "Max fan speed" +msgstr "Max rychlost ventilátoru" + +msgid "Max infill" +msgstr "Max výplň" + +msgid "Max layer height" +msgstr "Max výška tisku" + +msgid "Max layer height can't be greater than nozzle diameter" +msgstr "Max výška vrstvy nemůže být větší než průměr trysky" + +msgid "Max length" +msgstr "Max délka" + +msgid "Max line overlap" +msgstr "Max překrytí čar" + msgid "Max merge distance" -msgstr "Maximální vzdálenost pro sloučení" +msgstr "Max vzdálenost pro sloučení" msgid "Max pillar linking distance" -msgstr "Max. vzdálenost propojení podpěr" +msgstr "Max vzdálenost propojení podpěr" msgid "Max print height" -msgstr "Maximální výška tisku" +msgstr "Max výška tisku" msgid "Max print speed" -msgstr "Maximální rychlost tisku" +msgstr "Max rychlost tisku" + +msgid "Max small perimeters length" +msgstr "Max délka malého perimetru" + +msgid "Max speed" +msgstr "Max rychlost" + +msgid "Max speed on the wipe tower" +msgstr "Max rychlost na čistící věži" + +msgid "Max speed reduction" +msgstr "Snížení rychlosti Max" msgid "Max volumetric slope negative" -msgstr "Maximální negativní objemový sklon" +msgstr "Max negativní objemový sklon" msgid "Max volumetric slope positive" -msgstr "Maximální pozitivní objemový sklon" +msgstr "Max pozitivní objemový sklon" msgid "Max volumetric speed" -msgstr "Maximální objemová rychlost" +msgstr "Max objemová rychlost" msgid "Maximal bridging distance" msgstr "Maximální vzdálenost přemostění" @@ -4439,9 +6152,6 @@ msgstr "Maximální vzdálenost mezi podpěrami u částí s řídkou výplní. msgid "Maximum acceleration E" msgstr "Maximální zrychlení E" -msgid "Maximum acceleration for travel moves" -msgstr "Maximální zrychlení pro posuny" - msgid "Maximum acceleration of the E axis" msgstr "Maximální zrychlení osy E" @@ -4457,16 +6167,8 @@ msgstr "Maximální zrychlení osy Z" msgid "Maximum acceleration when extruding" msgstr "Maximální zrychlení při extruzi" -msgid "" -"Maximum acceleration when extruding (M204 P)\n" -"\n" -"Marlin (legacy) firmware flavor will use this also as travel acceleration " -"(M204 T)." -msgstr "" -"Maximální zrychlení při vytlačování (M204 P)\n" -"\n" -"Marlin (legacy) firmware používá toto také jako zrychlení při přesunu (M204 " -"T)." +msgid "Maximum acceleration when extruding (M204 P)" +msgstr "Maximální zrychlení při vytlačování (M204 P)" msgid "Maximum acceleration when retracting" msgstr "Maximální zrychlení při retrakci" @@ -4474,6 +6176,12 @@ msgstr "Maximální zrychlení při retrakci" msgid "Maximum acceleration when retracting (M204 R)" msgstr "Maximální zrychlení při retrakci (M204 R)" +msgid "Maximum acceleration when travelling" +msgstr "Maximální zrychlení při cestování" + +msgid "Maximum acceleration when travelling (M204 T)" +msgstr "Maximální zrychlení při cestování (M204 T)" + msgid "Maximum acceleration X" msgstr "Maximální zrychlení X" @@ -4487,20 +6195,53 @@ msgid "Maximum accelerations" msgstr "Maximální zrychlení" msgid "" -"Maximum deviation of exported G-code paths from their full resolution " -"counterparts. Very high resolution G-code requires huge amount of RAM to " -"slice and preview, also a 3D printer may stutter not being able to process a " -"high resolution G-code in a timely manner. On the other hand, a low " -"resolution G-code will produce a low poly effect and because the G-code " -"reduction is performed at each layer independently, visible artifacts may be " -"produced." +"Maximum angle to let a brim ear appear. \n" +"If set to 0, no brim will be created. \n" +"If set to ~178, brim will be created on everything but straight sections." msgstr "" -"Maximální odchylka exportovaných cest G-codu od plného rozlišení. G-code ve " -"velmi vysokém rozlišení vyžaduje při slicování a náhledu obrovské množství " -"paměti RAM a také se může stát, že 3D tiskárna nebude schopna včas zpracovat " -"G-code ve vysokém rozlišení. Na druhou stranu G-code s nízkým rozlišením " -"vytvoří low poly efekt a protože redukce G-codu se provádí v každé vrstvě " -"nezávisle, mohou vznikat viditelné artefakty." +"Maximální úhel, aby se objevilo oko s okrajem. \n" +"Pokud je nastaveno na 0, nebude vytvořen žádný okraj. \n" +"Pokud je nastaveno na ~178, okraj se vytvoří na všem kromě úseků průlivu." + +msgid "" +"Maximum area for the hole where the hole_size_compensation will apply fully. " +"After that, it will decrease down to 0 for four times this area. Set to 0 to " +"let the hole_size_compensation apply fully for all detected holes" +msgstr "" +"Maximální plocha pro díru, kde se plně uplatní kompenzace velikosti hole.Poté se " +"sníží na 0 na čtyřnásobek této oblasti. Nastavte na 0 na nechte hodnotu " +"hole_size_compensation plně aplikovat na všechny zjištěné díry" + +msgid "" +"Maximum defection of a point to the estimated radius of the circle.\n" +"As cylinders are often exported as triangles of varying size, points may not " +"be on the circle circumference. This setting allows you some leway to " +"broaden the detection.\n" +"In mm or in % of the radius." +msgstr "" +"Maximální odchylka bodu od odhadovaného poloměru kruhu.\n" +"Vzhledem k tomu, že válce jsou často exportovány jako trojúhelníky různé velikosti, " +"body nemusí být na perimetru kruhu. Toto nastavení vám umožňuje určitou volnost " +"rozšířit detekci.\n" +"V mm nebo v % poloměru." + +msgid "" +"Maximum density for bridge lines. If you want more space between line (or " +"less), you can modify it. A value of 50% will create two times less lines, " +"and a value of 200% will create two time more lines that overlap each other." +msgstr "" +"Maximální hustota pro můstkové linky. Pokud chcete více prostoru mezi linkami (nebo " +"méně), můžete jej upravit. Hodnota 50 % vytvoří dvakrát méně řádků, a hodnota 200 % " +"vytvoří dvakrát více čar, které se navzájem překrývají." + +msgid "" +"Maximum distance between two points to allow adding new ones. Allow to avoid " +"distorting long strait areas.\n" +"Set zero to disable." +msgstr "" +"Maximální vzdálenost mezi dvěma body, aby bylo možné přidat nové. Povolit vyhnout " +"senarušuje dlouhé oblasti průlivu.\n" +"Nastavit nulu pro zakázání." msgid "Maximum exposure time" msgstr "Maximální doba osvitu" @@ -4532,32 +6273,35 @@ msgstr "Maximální rychlost posuvu Z" msgid "Maximum feedrates" msgstr "Maximální rychlosti posuvu" +msgid "Maximum G1 per second" +msgstr "Maximální G1 za sekundu" + msgid "Maximum initial exposure time" msgstr "Maximální doba počátečního osvitu" msgid "Maximum jerk E" -msgstr "Maximální ryv E" +msgstr "Max Jerk (Ryv) E" msgid "Maximum jerk of the E axis" -msgstr "Maximální ryv (jerk) osy E" +msgstr "Max Jerk (Ryv) osy E" msgid "Maximum jerk of the X axis" -msgstr "Maximální ryv (jerk) osy X" +msgstr "Max Jerk (Ryv) osy X" msgid "Maximum jerk of the Y axis" -msgstr "Maximální ryv (jerk) osy Y" +msgstr "Max Jerk (Ryv) osy Y" msgid "Maximum jerk of the Z axis" -msgstr "Maximální ryv (jerk) osy Z" +msgstr "Max Jerk (Ryv) osy Z" msgid "Maximum jerk X" -msgstr "Maximální ryv X" +msgstr "Max Jerk (Ryv) X" msgid "Maximum jerk Y" -msgstr "Maximální ryv Y" +msgstr "Max Jerk (Ryv) Y" msgid "Maximum jerk Z" -msgstr "Maximální ryv Z" +msgstr "Max Jerk (Ryv) Z" msgid "Maximum length of the infill anchor" msgstr "Maximální délka výplňové kotvy" @@ -4566,14 +6310,25 @@ msgid "" "Maximum number of bridges that can be placed on a pillar. Bridges hold " "support point pinheads and connect to pillars as small branches." msgstr "" -"Maximální počet mostů, které mohou být umístěny na podpěrný sloup. Mosty " -"drží hroty podpěr a připojují se ke sloupům jako malé větve." +"Maximální počet mostů, které mohou být umístěny na podpěrný sloup. Mosty drží hroty " +"podpěr a připojují se ke sloupům jako malé větve." -msgid "Maximum width of a segmented region" -msgstr "Maximální šířka segmentované oblasti" +msgid "" +"Maximum speed allowed for this filament. Limits the maximum speed of a print " +"to the minimum of the print speed and the filament speed. Set zero for no " +"limit." +msgstr "" +"Maximální povolená rychlost pro toto vlákno. Omezuje maximální rychlost tiskuna " +"minimum rychlosti tisku a rychlosti vlákna. Nastavte nulu pro ne omezit." -msgid "Maximum width of a segmented region. Zero disables this feature." -msgstr "Maximální šířka segmentované oblasti. Nula tuto funkci vypne." +msgid "" +"Maximum volumetric speed allowed for this filament. Limits the maximum " +"volumetric speed of a print to the minimum of print and filament volumetric " +"speed. Set zero for no limit." +msgstr "" +"Maximální objemová rychlost povolená pro toto vlákno. Omezuje maximální objemová " +"rychlost tisku na minimum tisku a objemová vlákna Rychlost. Nastavte nulu pro žádný " +"limit." msgid "Merge" msgstr "Sloučit" @@ -4581,28 +6336,105 @@ msgstr "Sloučit" msgid "Merge all parts to the one single object" msgstr "Sloučit všechny části do jednoho jediného objektu" +msgid "Merge objects to the one multipart object" +msgstr "Sloučit objekty do jednoho vícedílného objektu" + +msgid "Merge objects to the one single object" +msgstr "Sloučit objekty do jednoho jediného objektu" + msgid "Merged" msgstr "Sloučení" +msgid "" +"Merging bridges or pillars into other pillars can increase the radius. Zero " +"means no increase, one means full increase." +msgstr "" +"Sloučení mostů nebo pilířů do jiných pilířů může zvýšit poloměr. Nulaznamená žádný " +"nárůst, jeden znamená plný nárůst." + msgid "Merging slices and calculating statistics" msgstr "Slučování tiskových vrstev a výpočet statistik" +msgid "Merging with perimeters" +msgstr "Sloučení s perimetry" + msgid "Mesh repair failed." msgstr "Oprava meshe selhala." -msgid "" -"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." -msgstr "" -"Mesh, která má být vydutěná, není vhodná pro vydutění (neohraničuje těleso)." - msgid "Message for pause print on current layer (%1% mm)." msgstr "Zpráva při pozastavení tisku na aktuální vrstvě ve výšce (%1% mm)." +msgid "Method" +msgstr "Metoda" + +msgid "Mill" +msgstr "Mlýn" + +msgid "Milling cutter" +msgstr "Fréza" + +msgid "Milling cutters" +msgstr "Frézy" + +msgid "Milling diameter" +msgstr "Průměr frézování" + +msgid "Milling extra XY size" +msgstr "Frézování extra velikosti XY" + +msgid "Milling only after" +msgstr "Frézování až po" + +msgid "Milling post-processing" +msgstr "Následné zpracování frézováním" + +msgid "Milling Speed" +msgstr "Rychlost frézování" + +msgid "milliseconds" +msgstr "milisekundy" + msgid "Min" -msgstr "Minimum" +msgstr "Min" + +msgid "min %s version" +msgstr "min %s verze" + +msgid "Min bridge density" +msgstr "Min hustota mostu" + +msgid "Min concave angle" +msgstr "Min úhel vyhlazování křivky (konkávní)" + +msgid "Min convex angle" +msgstr "Min konvexní úhel" + +msgid "Min first layer speed" +msgstr "Min rychlost první vrstvy" + +msgid "Min gap-fill surface" +msgstr "Min plocha vyplňování mezer" + +msgid "Min height for travel" +msgstr "Min výška pro cestování" + +msgid "Min layer height" +msgstr "Min výška vrstvy" + +msgid "Min layer height can't be greater than Max layer height" +msgstr "Min výška vrstvy nemůže být větší než Max výška vrstvy" + +msgid "Min length" +msgstr "Min délka" msgid "Min print speed" -msgstr "Minimální rychlost tisku" +msgstr "Rychlost tisku Min " + +msgid "Min small perimeters length" +msgstr "Min délka malých perimetrů" + +msgid "Min surface" +msgstr "Min povrch" msgid "Min width" msgstr "Min šířka" @@ -4619,8 +6451,21 @@ msgstr "Minimální vzdálenost bodů" msgid "Minimal purge on wipe tower" msgstr "Minimální vytlačený objem na čistící věži" -msgid "Minimize application" -msgstr "Minimalizace aplikace" +msgid "" +"Minimum (concave) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimální (konkávní) úhel ve vrcholu umožňující vyhlazení (pokus o vytvoření křivka " +"kolem vrcholu). 180 : nic nebude hladké, 0 : všechny úhly budou být vyhlazený." + +msgid "" +"Minimum (convex) angle at a vertex to enable smoothing (trying to create a " +"curve around the vertex). 180 : nothing will be smooth, 0 : all angles will " +"be smoothened." +msgstr "" +"Minimální (konvexní) úhel ve vrcholu umožňující vyhlazení (pokus o vytvoření křivka " +"kolem vrcholu). 180 : nic nebude hladké, 0 : všechny úhly budou být vyhlazený." msgid "Minimum bottom shell thickness" msgstr "Minimální tloušťka spodní skořepiny" @@ -4628,9 +6473,51 @@ msgstr "Minimální tloušťka spodní skořepiny" msgid "Minimum bottom shell thickness is %1% mm." msgstr "Minimální tloušťka spodní skořepiny je %1% mm." +msgid "" +"Minimum density for bridge lines. If Lower than bridge_overlap, then the " +"overlap value can be lowered automatically down to this value. If the value " +"is higher, this parameter has no effect.\n" +"Default to 87.5% to allow a little void between the lines." +msgstr "" +"Minimální hustota pro mostní vedení. Pokud je nižší než bridge_overlap, pak hodnotu " +"překrytí lze automaticky snížit až na tuto hodnotu. Pokud je hodnota je vyšší, " +"tento parametr nemá žádný vliv.\n" +"Výchozí hodnota je 87,5% aby mezi řádky byla malá mezera." + +msgid "" +"Minimum detail resolution, used for internal structures (gapfill and some " +"infill patterns).\n" +"Don't put a too-small value (0.05mm is way too low for many printers), as it " +"may create too many very small segments that may be difficult to display and " +"print." +msgstr "" +"Minimální rozlišení detailů, používané pro vnitřní struktury (gapfill a některé " +"vzory výplně).\n" +"Neuvádějte příliš malou hodnotu (0,05 mm je pro mnoho tiskáren příliš málo), " +"protože může vytvořit příliš mnoho velmi malých segmentů, které může být obtížné " +"zobrazit a tisk." + +msgid "" +"Minimum detail resolution, used to simplify the input file for speeding up " +"the slicing job and reducing memory usage. High-resolution models often " +"carry more details than printers can render. Set zero to disable any " +"simplification and use full resolution from input. \n" +"Note: Slic3r has an internal working resolution of 0.0001mm.\n" +"Infill & Thin areas are simplified up to 0.0125mm." +msgstr "" +"Minimální rozlišení detailů, používané ke zjednodušení vstupního souboru pro " +"urychlení úloha slicování a snižování využití paměti. Modely s vysokým rozlišením " +"často nesou více detailů, než mohou tiskárny vykreslit. Nastavením nuly zakážete " +"jakékoli zjednodušení a využití plného rozlišení ze vstupu. \n" +"Poznámka: Slic3r má vnitřní pracovní rozlišení 0,0001 mm.\n" +"Výplňové a tenké oblasti jsou zjednodušeny až na 0,0125 mm." + msgid "Minimum exposure time" msgstr "Minimální doba osvitu" +msgid "Minimum extrusion length" +msgstr "Minimální délka extruze" + msgid "Minimum feedrate when extruding" msgstr "Minimální rychlosti posuvu během extruze" @@ -4643,9 +6530,19 @@ msgstr "Minimální rychlosti posuvu" msgid "Minimum initial exposure time" msgstr "Minimální doba počátečního osvitu" +msgid "Minimum retraction" +msgstr "Minimální retrakce" + msgid "Minimum shell thickness" msgstr "Minimální tloušťka skořepiny" +msgid "" +"Minimum speed when printing the first layer.\n" +"Set zero to disable." +msgstr "" +"Minimální rychlost při tisku první vrstvy.\"\n" +"Nastavit nulu pro zakázání." + msgid "Minimum thickness of a top / bottom shell" msgstr "Minimální tloušťka vrchní / spodní skořepiny" @@ -4655,6 +6552,9 @@ msgstr "Minimální tloušťka vrchní skořepiny" msgid "Minimum top shell thickness is %1% mm." msgstr "Minimální tloušťka vrchní skořepiny je %1% mm." +msgid "Minimum top width for infill" +msgstr "Minimální horní šířka pro výplň" + msgid "Minimum travel after retraction" msgstr "Minimální dráha extruderu po retrakci" @@ -4664,15 +6564,72 @@ msgstr "Minimální rychlost při přesunu" msgid "Minimum travel feedrate (M205 T)" msgstr "Minimální rychlost při přesunu (M205 T)" +msgid "" +"Minimum unsupported width for an extrusion to apply the bridge fan & " +"overhang speed to this overhang. Can be in mm or in a % of the nozzle " +"diameter. Set to 0 to deactivate." +msgstr "" +"Minimální nepodporovaná šířka pro vytlačování pro použití mostového ventilátoru & " +"rychlost přesahu k tomuto přesahu. Může být v mm nebo v % trysky průměr. Pro " +"deaktivaci nastavte na 0." + +msgid "" +"Minimum unsupported width for an extrusion to apply the bridge flow to this " +"overhang. Can be in mm or in a % of the nozzle diameter. Set to 0 to " +"deactivate." +msgstr "" +"Minimální nepodporovaná šířka pro vytlačování pro aplikaci mostního toku na " +"totopřesah. Může být v mm nebo v % průměru trysky. Nastavte na 0 až deaktivovat." + msgid "Minimum wall thickness of a hollowed model." msgstr "Minimální tloušťka stěny dutého modelu." +msgid "minimum width" +msgstr "minimální šířka" + +msgid "Minimum width" +msgstr "Minimální šířka" + +msgid "" +"Minimum width for the extrusion to be extruded (widths lower than the nozzle " +"diameter will be over-extruded at the nozzle diameter). If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter. The " +"default behavior of PrusaSlicer is with a 33% value. Put 100% to avoid any " +"sort of over-extrusion." +msgstr "" +"Minimální šířka pro vytlačování, které má být vytlačeno (šířky menší než tryska " +"průměr bude nadprůměrně vytlačen na průměru trysky). Pokud je vyjádřen jako " +"procento (například 110%) bude vypočítáno z průměru trysky.Výchozí chování " +"PrusaSlicer je s 33% hodnotou. Dejte 100%, abyste se vyhnuli nějaké nadměrné " +"vytlačování." + +msgid "" +"Minimum width of features to maintain when doing the first layer " +"compensation." +msgstr "" +"Minimální šířka prvků, které je třeba zachovat při vytváření první vrstvykompenzace." + +msgid "Mirror" +msgstr "Zrcadlit" + msgid "Mirror horizontally" msgstr "Zrcadlit horizontálně" msgid "Mirror Object" msgstr "Zrcadlit Objekt" +msgid "Mirror the selected object" +msgstr "Zrcadlit vybraný objekt" + +msgid "Mirror the selected object along the X axis" +msgstr "Zrcadlit rozměr vybraného objektu podél osy X" + +msgid "Mirror the selected object along the Y axis" +msgstr "Zrcadlit rozměr vybraného objektu podél osy Y" + +msgid "Mirror the selected object along the Z axis" +msgstr "Zrcadlit rozměr vybraného objektu podél osy Z" + msgid "Mirror vertically" msgstr "Zrcadlit vertikálně" @@ -4697,15 +6654,27 @@ msgstr "mm nebo %" msgid "mm or % (zero to disable)" msgstr "mm nebo % (nula pro deaktivaci)" +msgid "mm/%" +msgstr "mm/%" + msgid "mm/s" msgstr "mm/s" msgid "mm/s or %" msgstr "mm/s nebo %" +msgid "mm/sec" +msgstr "mm/sec" + msgid "mm/s²" msgstr "mm/s²" +msgid "mm/s² or %" +msgstr "mm/s² nebo %" + +msgid "mm3" +msgstr "mm3" + msgid "mm²" msgstr "mm²" @@ -4727,12 +6696,27 @@ msgstr "Model" msgid "model" msgstr "model" +msgid "Model fixing" +msgstr "Opravování modelu" + +msgid "Model Repair by the Netfabb service" +msgstr "Oprava modelu službou Netfabb" + msgid "Model repair canceled" msgstr "Oprava modelu byla zrušena" +msgid "Model repair failed:" +msgstr "Oprava modelu selhala:" + msgid "Model repair finished" msgstr "Oprava modelu byla dokončena" +msgid "Model repaired successfully" +msgstr "Model byl úspěšně opraven" + +msgid "Model rounding precision" +msgstr "Přesnost zaokrouhlování modelu" + msgid "Modifications to the current profile will be saved." msgstr "Úpravy aktuálního profilu budou uloženy." @@ -4745,6 +6729,9 @@ msgstr "Modifikátor" msgid "Modifiers" msgstr "Modifikátory" +msgid "Modifying slices" +msgstr "Úprava Slicování" + msgid "money/bottle" msgstr "cena/láhev" @@ -4754,8 +6741,11 @@ msgstr "cena/kg" msgid "Monotonic" msgstr "Monotónní" -msgid "More" -msgstr "Více" +msgid "Monotonic (filled)" +msgstr "Monotónní (plněné)" + +msgid "Most likely the configuration was produced by a newer version of " +msgstr "S největší pravděpodobností byla konfigurace vytvořena novější verzí " msgid "Mouse wheel" msgstr "Kolečko myši" @@ -4766,6 +6756,12 @@ msgstr "Kolečko myši:" msgid "Move" msgstr "Přesunout" +msgid "Move active slider thumb Left" +msgstr "Posunout ukazatel aktivního posuvníku vlevo" + +msgid "Move active slider thumb Right" +msgstr "Posunout ukazatel aktivního posuvníku vpravo" + msgid "Move active thumb Down" msgstr "Posunout aktivní ukazatel dolů" @@ -4781,6 +6777,12 @@ msgstr "Posunout aktivní ukazatel nahoru" msgid "Move clipping plane" msgstr "Posunout řezovou rovinu" +msgid "Move current slider thumb Down" +msgstr "Posunout aktivní posuvník dolů" + +msgid "Move current slider thumb Up" +msgstr "Posunout aktivní posuvník nahoru" + msgid "Move drainage hole" msgstr "Posun odtokového otvoru" @@ -4805,6 +6807,25 @@ msgstr "Posun výběru o 10 mm v kladném směru osy Y" msgid "Move support point" msgstr "Posun podpěrného bodu" +msgid "" +"Move the fan start in the past by at least this delay (in seconds, you can " +"use decimals). It assumes infinite acceleration for this time estimation, " +"and will only take into account G1 and G0 moves.\n" +"It won't move fan comands from custom gcodes (they act as a sort of " +"'barrier').\n" +"It won't move fan comands into the start gcode if the 'only custom start " +"gcode' is activated.\n" +"Use 0 to deactivate." +msgstr "" +"Posuňte start ventilátoru v minulosti alespoň o toto zpoždění (v sekundách, můžete " +"použijte desetinná místa). Předpokládá nekonečné zrychlení pro tento časový odhad,a " +"bude brát v úvahu pouze pohyby G1 a G0.\n" +"Nepřesune příkazy pro fanoušky z vlastních kódů gcode (fungují jako jakési " +"'bariéra').\n" +"Nepřesune příkazy ventilátoru do startovacího gcode, pokud je jediný vlastní " +"startgcode je aktivován.\n" +"Pro deaktivaci použijte 0." + msgid "Movement" msgstr "Přejezd" @@ -4818,20 +6839,28 @@ msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" -"Multimateriálové tiskárny mohou potřebovat, aby při výměně nástrojů " -"vyčistili extrudery. Vytlačí přebytečný materiál do čistící věže." +"Multimateriálové tiskárny mohou potřebovat, aby při výměně nástrojů vyčistili " +"extrudery. Vytlačí přebytečný materiál do čistící věže." msgid "Multi-part object detected" msgstr "Detekován objekt obsahující více částí" -msgid "Multimaterial painting" -msgstr "Multimateriálové malování" +msgid "Multimaterial" +msgstr "Multimateriál" + +msgid "Multimaterial toolchange string reduction" +msgstr "Multimateriálová redukce struny pro výměnu nástrojů" + +msgid "Multimaterial toolchange temperature" +msgstr "Multimateriálová teplota výměny nástrojů" msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "" -"Bylo nalezeno více zařízení %s . Během flashování mějte připojené pouze " -"jedno." +"Bylo nalezeno více zařízení %s . Během flashování mějte připojené pouze jedno." + +msgid "Multiple extruders" +msgstr "Více extruderů" msgid "" "Multiple objects were loaded for a multi-material printer.\n" @@ -4842,6 +6871,9 @@ msgstr "" "Mají být vloženy jako jeden objekt obsahující více částí, \n" "namísto vložení několika objektů?" +msgid "Multiplier" +msgstr "Násobitel" + msgid "Multiply copies by creating a grid." msgstr "Vynásobí kopie vytvořením mřížky." @@ -4854,6 +6886,9 @@ msgstr "N/A" msgid "Name" msgstr "Název" +msgid "Name and Size" +msgstr "Jméno a velikost" + msgid "Name of the printer" msgstr "Název tiskárny" @@ -4861,8 +6896,8 @@ msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "" -"Název varianty tiskárny. Varianty tiskárny mohou být například rozlišeny " -"podle průměru trysky." +"Název varianty tiskárny. Varianty tiskárny mohou být například rozlišeny podle " +"průměru trysky." msgid "Name of the printer vendor." msgstr "Název výrobce tiskárny." @@ -4870,36 +6905,39 @@ msgstr "Název výrobce tiskárny." msgid "Name of the profile, from which this profile inherits." msgstr "Název profilu, ze kterého tento profil zdědí." -msgid "Names of presets related to the physical printer" -msgstr "Názvy přednastavení souvisejících s fyzickou tiskárnou" +msgid "Nb down:" +msgstr "Nb dolů:" + +msgid "Nb tests:" +msgstr "Nb testy:" + +msgid "Nb up:" +msgstr "Nb nahoru:" msgid "Nearest" msgstr "Nejbližší" -msgid "Negative Volume" -msgstr "Negativní Objem" - msgid "Network lookup" msgstr "Hledání v síti" msgid "New" msgstr "Nový" -msgid "New prerelease version %1% is available." -msgstr "K dispozici je nová předběžná verze %1%." - -msgid "New printer preset selected" -msgstr "Zvoleno nové přednastavení tiskárny" - msgid "New Project" msgstr "Nový Projekt" -msgid "New release version %1% is available." -msgstr "K dispozici je nová verze %1%." +msgid "New project, clear platter" +msgstr "Nový projekt, čistý stůl" msgid "New Value" msgstr "Nová hodnota" +msgid "New value" +msgstr "Nová hodnota" + +msgid "New version is available." +msgstr "K dispozici je nová verze." + msgid "New version of %s is available" msgstr "Je dostupná nová verze %s" @@ -4912,33 +6950,30 @@ msgstr "Akce vpřed: %1%" msgid "Next Undo action: %1%" msgstr "Akce zpět: %1%" -msgid "No brim" -msgstr "Bez límce" - -msgid "" -"No color change event was added to the print. The print does not look like a " -"sign." -msgstr "Do tisku nebyla přidána žádná změny barvy. Tisk nevypadá jako nápis." - -msgid "No errors detected" -msgstr "Nebyly zjištěny žádné chyby" - msgid "No extrusion" msgstr "Žádná extruze" msgid "No extrusions were generated for objects." -msgstr "" -"Při tisku objektů nebyly vygenerovány žádné extruze tiskového materiálu." +msgstr "Při tisku objektů nebyly vygenerovány žádné extruze tiskového materiálu." msgid "No pad can be generated for this model with the current configuration" msgstr "Pro aktuální model nelze vygenerovat žádnou podložku" +msgid "No perimeters on bridge areas" +msgstr "Žádné perimetry v oblastech mostu" + msgid "No previously sliced file." msgstr "Žádné dříve slicované soubory." msgid "NO RAMMING AT ALL" msgstr "ŽÁDNÁ RAPIDNÍ EXTRUZE" +msgid "No solid infill over" +msgstr "Žádná plná výplň" + +msgid "No solid infill over perimeters" +msgstr "Žádná plná výplň po perimetru" + msgid "No sparse layers (EXPERIMENTAL)" msgstr "Bez řídkých vrstev (EXPERIMENTÁLNÍ)" @@ -4951,6 +6986,9 @@ msgstr "Žádné aktualizace nejsou dostupné" msgid "None" msgstr "Žádné" +msgid "None (soluble)" +msgstr "Žádný (rozpustný)" + msgid "Normal" msgstr "Normální" @@ -4963,39 +7001,55 @@ msgstr "normální režim" msgid "not a ZIP archive" msgstr "není ZIP archiv" +msgid "Not connected" +msgstr "Nepřipojený" + msgid "Not found:" msgstr "Nenalezeno:" +msgid "Not on first layer" +msgstr "Ne v první vrstvě" + +msgid "not-marlin/lerdge firmware compensation" +msgstr "Kompenzační firmwar not-marlin/ledge" + msgid "Note" msgstr "Poznámka" -msgid "Note, that the selected preset will be deleted from this printer too." -msgid_plural "" -"Note, that the selected preset will be deleted from these printers too." -msgstr[0] "Pozor, vybrané přednastavení bude odstraněno i z této tiskárny." -msgstr[1] "Pozor, vybrané přednastavení bude odstraněno i z těchto tiskáren." -msgstr[2] "Pozor, vybrané přednastavení bude odstraněno i z těchto tiskáren." -msgstr[3] "Pozor, vybrané přednastavení bude odstraněno i z těchto tiskáren." +msgid "Note that only Multiple of 5 can be engraved in the part" +msgstr "Všimněte si, že do dílu lze vyrýt pouze násobek 5" msgid "" -"Note, that this printer will be deleted after deleting the selected preset." -msgid_plural "" -"Note, that these printers will be deleted after deleting the selected preset." -msgstr[0] "" -"Upozorňujeme, že tato tiskárna bude po smazání vybraného přednastavení " -"odstraněna." -msgstr[1] "" -"Upozorňujeme, že tyto tiskárny budou po smazání vybraného přednastavení " -"odstraněny." -msgstr[2] "" -"Upozorňujeme, že tyto tiskárny budou po smazání vybraného přednastavení " -"odstraněny." -msgstr[3] "" -"Upozorňujeme, že tyto tiskárny budou po smazání vybraného přednastavení " -"odstraněny." +"Note, that selected preset will be deleted from this/those printer(s) too." +msgstr "" +"Upozorňujeme, že vybrané přednastavené bude odstraněno také z těchto tiskáren." -msgid "NOTE:" -msgstr "POZNÁMKA:" +msgid "" +"Note, that this/those printer(s) will be deleted after deleting of the " +"selected preset." +msgstr "" +"Upozorňujeme, že tato/tyto tiskárny budou odstraněny po odstranění vybraného " +"přednastavení." + +msgid "" +"Note: All parameters from this group are moved to the Physical Printer " +"settings (see changelog).\n" +"\n" +"A new Physical Printer profile is created by clicking on the \"cog\" icon " +"right of the Printer profiles combo box, by selecting the \"Add physical " +"printer\" item in the Printer combo box. The Physical Printer profile editor " +"opens also when clicking on the \"cog\" icon in the Printer settings tab. " +"The Physical Printer profiles are being stored into %s/physical_printer " +"directory." +msgstr "" +"Poznámka: Všechny parametry z této skupiny jsou přesunuty do fyzické " +"tiskárnynastavení (viz changelog).\n" +"\n" +"Nový profil fyzické tiskárny se vytvoří kliknutím na ikonu \"ozubená\" vpravo od " +"rozbalovacího pole Profily tiskáren, výběrem možnosti \"Přidat fyzickoutiskárna\" v " +"rozbalovacím seznamu Tiskárna. Editor profilu fyzické tiskárny otevře se také po " +"kliknutí na ikonu \"ozubené kolečko\" na kartě Nastavení tiskárny.Profily fyzické " +"tiskárny se ukládají do %s/physical_printeradresář." msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "Poznámka: Je vyžadována verze AstroBoxu nejméně 1.1.0." @@ -5004,8 +7058,8 @@ msgid "" "Note: FlashAir with firmware 2.00.02 or newer and activated upload function " "is required." msgstr "" -"Poznámka: Vyžaduje se FlashAir s firmwarem 2.00.02 nebo novějším a " -"aktivovanou funkcí nahrávání." +"Poznámka: Vyžaduje se FlashAir s firmwarem 2.00.02 nebo novějším a aktivovanou " +"funkcí nahrávání." msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "Poznámka: Je vyžadován OctoPrint ve verzi alespoň 1.1.0." @@ -5017,7 +7071,7 @@ msgid "Note: some shortcuts work in (non)editing mode only." msgstr "Poznámka: některé zkratky nefungují v režimu editace." msgid "Note: This preset will be replaced after saving" -msgstr "Upozornění: Taoto přednastavení bude po uložení nahrazeno" +msgstr "Upozornění: Toto přednastavení bude po uložení nahrazeno" msgid "Notes" msgstr "Poznámky" @@ -5025,9 +7079,6 @@ msgstr "Poznámky" msgid "Notice" msgstr "Oznámení" -msgid "Notify about new releases" -msgstr "Upozornění na nové verze" - msgid "nozzle" msgstr "tryska" @@ -5043,23 +7094,37 @@ msgstr "Průměr trysky:" msgid "Nozzle temperature" msgstr "Teplota trysky" +msgid "Nozzle volume" +msgstr "Objem trysky" + msgid "Number of cooling moves" msgstr "Počet chladících pohybů" msgid "Number of extruders of the printer." -msgstr "Počet extrudérů tiskárny." +msgstr "Počet extruderů tiskárny." msgid "" "Number of interface layers to insert between the object(s) and support " "material." -msgstr "Počet interface vrstev vložených mezi objekt (objekty) a podpěry." +msgstr "Počet kontaktních vrstev vložených mezi objekt (objekty) a podpěry." msgid "" -"Number of interface layers to insert between the object(s) and support " -"material. Set to -1 to use support_material_interface_layers" +"Number of loops for the skirt. If the Minimum Extrusion Length option is " +"set, the number of loops might be greater than the one configured here. Set " +"zero to disable skirt completely." msgstr "" -"Počet kontaktních vrstev, které se vloží mezi objekt(y) a podpěry. Nastavte " -"na -1, chcete-li použít support_material_interface_layers" +"Počet smyček pro sukni. Pokud je možnost Minimální délka vysunutí set, počet smyček " +"může být větší než ten nakonfigurovaný zde. Set nula pro úplné vypnutí sukně." + +msgid "Number of milling heads." +msgstr "Počet frézovacích hlav." + +msgid "" +"Number of mm the overhang need to be for the reversal to be considered " +"useful. Can be a % of the perimeter width." +msgstr "" +"Počet mm přesahu, který musí být, aby bylo možné zvážit obrácení užitečné. Může být " +"% z šířky perimetru." msgid "Number of pixels in" msgstr "Počet pixelů v ose" @@ -5082,12 +7147,14 @@ msgstr "Počet vrchních generovaných plných vrstev." msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" -msgstr "" -"Počet vrstev potřebných pro přechod z počáteční doby osvitu na dobu osvitu" +msgstr "Počet vrstev potřebných pro přechod z počáteční doby osvitu na dobu osvitu" msgid "Number of tool changes" msgstr "Počet změn nástroje" +msgid "O&pen %s" +msgstr "O&otevřít %s" + msgid "Object elevation" msgstr "Nadzvednutí objektu" @@ -5097,36 +7164,17 @@ msgstr "Manipulace s objektem" msgid "Object name" msgstr "Jméno objektu" -msgid "Object name: %1%" -msgstr "Název objektu: %1%" - msgid "Object or Instance" msgstr "Objekt nebo Instanci" msgid "Object reordered" -msgstr "Zěna pořadí objektů" +msgstr "Změna pořadí objektů" msgid "Object Settings to modify" msgstr "Změna nastavení objektu" -msgid "" -"Object size from file %s appears to be zero.\n" -"This object has been removed from the model" -msgid_plural "" -"Objects size from file %s appears to be zero.\n" -"These objects have been removed from the model" -msgstr[0] "" -"Velikost objektu ze souboru %s se zdá být nulová.\n" -"Tento objekt byl z modelu odstraněn" -msgstr[1] "" -"Velikost objektů ze souboru %s se zdá být nulová.\n" -"Tento objekty byly z modelu odstraněny." -msgstr[2] "" -"Velikost objektů ze souboru %s se zdá být nulová.\n" -"Tento objekty byly z modelu odstraněny." -msgstr[3] "" -"Velikost objektů ze souboru %s se zdá být nulová.\n" -"Tento objekty byly z modelu odstraněny." +msgid "Object sort" +msgstr "Řazení objektů" msgid "Object too large?" msgstr "Objekt moc velký?" @@ -5136,23 +7184,16 @@ msgid "" "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" -"Objekty budou použity k vyčištění barvy filamentu v trysce po změně " -"extruderu, aby se ušetřil materiál, který by jinak skončil v čistící věži. " -"Výsledkem budou objekty s náhodně mixovanými barvami." +"Objekty budou použity k vyčištění barvy filamentu v trysce po změně extruderu, aby " +"se ušetřil materiál, který by jinak skončil v čistící věži. Výsledkem budou objekty " +"s náhodně mixovanými barvami." -msgid "object" -msgid_plural "objects" -msgstr[0] "objekt" -msgstr[1] "objektů" -msgstr[2] "objektů" -msgstr[3] "objektů" +msgid "object(s)" +msgstr "objekt(y)" msgid "objects" msgstr "objekty" -msgid "Objects List" -msgstr "Seznam Objektů" - msgid "Octagram Spiral" msgstr "Octagram Spiral" @@ -5165,27 +7206,70 @@ msgstr "současného Objektu" msgid "Offset" msgstr "Odsazení" +msgid "Offsets (for multi-extruder printers)" +msgstr "Offsety (pro tiskárny s více Extrudery)" + +msgid "" +"Old layout: all windows are in the application, settings are on the top tab " +"bar and the platter choice in on the bottom of the platter view." +msgstr "" +"Staré rozvržení: všechna okna jsou v aplikaci, nastavení jsou na horní kartě bar a " +"výběr talíře ve spodní části zobrazení talíře." + msgid "Old Value" msgstr "Stará hodnota" +msgid "Old value" +msgstr "Stará hodnota" + +msgid "On" +msgstr "Na" + +msgid "On first layer" +msgstr "Na první vrstvě" + +msgid "On odd layers" +msgstr "Na lichých vrstvách" + msgid "" "On OSX there is always only one instance of app running by default. However " "it is allowed to run multiple instances of same app from the command line. " "In such case this settings will allow only one instance." msgstr "" -"Na OSX je ve výchozím nastavení vždy spuštěna pouze jedna instance aplikace. " -"Je však povoleno spouštět více instancí stejné aplikace z příkazového řádku. " -"V takovém případě toto nastavení povolí pouze jednu instanci." +"Na OSX je ve výchozím nastavení vždy spuštěna pouze jedna instance aplikace. Je " +"však povoleno spouštět více instancí stejné aplikace z příkazového řádku. V takovém " +"případě toto nastavení povolí pouze jednu instanci." -msgid "On overhangs only" -msgstr "Pouze na převisech" +msgid "On overhangs" +msgstr "Na převisech" + +msgid "" +"On some OS like MacOS or some Linux, tooltips can't stay on for a long time. " +"This setting replaces native tooltips with custom dialogs to improve " +"readability (only for settings).\n" +"Note that for the number controls, you need to hover the arrows to get the " +"custom tooltip. Also, it keeps the focus but will give it back when it " +"closes. It won't show up if you are editing the field." +msgstr "" +"Na některých operačních systémech, jako je MacOS nebo Linux, nemohou popisky zůstat " +"zapnuté po dlouhou dobu.Toto nastavení nahrazuje nativní popisky vlastními dialogy " +"pro zlepšeníčitelnost (pouze pro nastavení).\n" +"Všimněte si, že pro ovládací prvky čísel musíte umístit kurzor na šipky, abyste " +"získali vlastní nápověda. Také zachová fokus, ale vrátí ho, když Zavírá se. " +"Nezobrazí se, pokud pole upravujete." + +msgid "On surfaces" +msgstr "Na površích" msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" -"V tomto systému používá %s certifikáty HTTPS ze systému Certificate Store " -"nebo Keychain." +"V tomto systému používá %s certifikáty HTTPS ze systému Certificate Store nebo " +"Keychain." + +msgid "On top surfaces" +msgstr "Na horních plochách" msgid "On/Off one layer mode of the vertical slider" msgstr "Zapnou/vypnout režim jedné vrstvy vertikálního posuvníku" @@ -5193,13 +7277,16 @@ msgstr "Zapnou/vypnout režim jedné vrstvy vertikálního posuvníku" msgid "One layer mode" msgstr "Zobrazení po jedné vrstvě" -msgid "One of the presets doesn't found" -msgstr "Jedno z přednastavení nebylo nalezeno" - msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "Jeden nebo více objektů bylo přiřazeno extruderu, který tiskárna nemá." +msgid "one test" +msgstr "jeden test" + +msgid "One-loop perimeters" +msgstr "Perimetry s One-loop (RC)" + msgid "Ongoing uploads" msgstr "Probíhá nahrávání" @@ -5208,16 +7295,48 @@ msgid "" "remove all but the last object, or enable sequential mode by " "\"complete_objects\"." msgstr "" -"V režimu spirálové vázy lze současně tisknout pouze jeden objekt. Buď " -"odeberte všechny objekty kromě posledního, nebo povolte sekvenční režim " -"pomocí \"complete_objects\"." +"V režimu spirálové vázy lze současně tisknout pouze jeden objekt. Buď odeberte " +"všechny objekty kromě posledního, nebo povolte sekvenční režim pomocí " +"\"complete_objects\"." msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "" -"Podpěry vytvářet pouze v případě, že leží na tiskové podložce. Nevytváří " -"podpěry na výtisky." +"Podpěry vytvářet pouze v případě, že leží na tiskové podložce. Nevytváří podpěry na " +"výtisky." + +msgid "Only custom Start G-code" +msgstr "Pouze vlastní počáteční G-kód" + +msgid "" +"Only do the vase trick on the external side. Useful when the thickness is " +"too low." +msgstr "" +"Udělejte trik s vázou pouze na vnější straně. Užitečné, když je tloušťka příliš " +"nízká." + +msgid "" +"Only do the vase trick on the external side. Useful when you only want to " +"remove seam from screw hole." +msgstr "" +"Udělejte trik s vázou pouze na vnější straně. Užitečné, když chcete jen odstraňte " +"šev z otvoru pro šroub." + +msgid "Only draw brim over the sharp edges of the model." +msgstr "Nakreslete límec pouze přes ostré hrany modelu." + +msgid "Only for inner side" +msgstr "Pouze pro vnitřní stranu" + +msgid "Only for outer side" +msgstr "Pouze pro vnější stranu" + +msgid "Only for overhangs" +msgstr "Pouze pro převisy" + +msgid "Only if on platter" +msgstr "Jen pokud na podnose" msgid "Only infill where needed" msgstr "Výplň pouze kde je potřeba" @@ -5231,34 +7350,54 @@ msgstr "Zvednout Z pouze nad" msgid "Only lift Z below" msgstr "Zvednout Z pouze pod" +msgid "Only one peri - other algo" +msgstr "Pouze jedno peri - jiné algo" + +msgid "Only one perimeter" +msgstr "Pouze jeden perimeter" + +msgid "Only one perimeter on First layer" +msgstr "Pouze jeden perimeter na první vrstvě" + +msgid "Only one perimeter on Top surfaces" +msgstr "Pouze jeden perimeter na horních plochách" + msgid "Only retract when crossing perimeters" msgstr "Provést retrakci pouze při přejíždění perimetrů" msgid "" "Only the following installed printers are compatible with the selected " -"filaments" +"filament:" msgstr "" -"S vybraným filamentem jsou kompatibilní pouze následující nainstalované " -"tiskárny" +"S vybraným filamentem jsou kompatibilní pouze následující nainstalované tiskárny:" msgid "" -"Only the following installed printers are compatible with the selected SLA " -"materials" +"Only used for Klipper, where you can name the extruder. If not set, will be " +"'extruderX' with 'X' replaced by the extruder number." msgstr "" -"S vybranými SLA materiály jsou kompatibilní pouze následující nainstalované " -"tiskárny" +"Používá se pouze pro Klipper, kde můžete extruder pojmenovat. Pokud není nastaveno, " +"bude 'extruderX' s 'X' nahrazeným číslem extruderu." + +msgid "Only when GCode is ready" +msgstr "Pouze kdyz je G-Code pripraven" msgid "Ooze prevention" msgstr "Prevence odkapávání" msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "" -"V současné době není funkce \"Prevence odkapávání\" filamentu podporována " -"společně s povolenou čistící věží." +"V současné době není funkce \"Prevence odkapávání\" filamentu podporována společně " +"s povolenou čistící věží." + +msgid "Open %s" +msgstr "Otevřít %s" msgid "Open a G-code file" msgstr "Otevřít G-code" +msgid "Open a new %s instance" +msgstr "Otevřít novou instanci %s" + msgid "Open a project file" msgstr "Otevřít soubor s projektem" @@ -5283,49 +7422,29 @@ msgstr "Otevřít soubor G-code:" msgid "Open G-code viewer" msgstr "Otevřít prohlížeč G-codu" -msgid "Open hyperlink in default browser?" -msgstr "Otevřít hypertextový odkaz ve výchozím prohlížeči?" - msgid "Open new G-code viewer" msgstr "Otevřít nový prohlížeč G-codu" msgid "Open new instance" msgstr "Otevřít novou instanci" -msgid "Open New Instance" -msgstr "Otevřít Novou Instanci" - -msgid "Open the dialog to modify shape gallery" -msgstr "Otevřete dialogové okno pro úpravu galerie tvarů" +msgid "Open project STL/OBJ/AMF/3MF with config, clear platter" +msgstr "Otevřít projekt STL/OBJ/AMF/3MF s konfigurací, čistý talíř" -msgid "Opening Configuration Wizard" -msgstr "Otevírání průvodce nastavením" +msgid "Open the %s releases page in your browser" +msgstr "Otevřete ve svém prohlížeči stránku vydání %s" -msgid "Opening new project while some presets are unsaved." -msgstr "Otevírání nového projektu. Některá přednastavení nejsou uložena." +msgid "Open the %s wiki in your browser" +msgstr "Otevřete %s wiki ve svém prohlížeči" -msgid "" -"Opens Tip of the day notification in bottom right corner or shows another " -"tip if already opened." -msgstr "" -"Zobrazí notifikaci s \"Tipem dne\" v pravém dolním rohu nebo zobrazí jinou, " -"pokud je již nějaká otevřená." +msgid "Open the Slic3r Manual in your browser" +msgstr "Otevřete ve svém prohlížeči příručku Slic3r" -msgid "Optimize object rotation for best surface quality." -msgstr "" -"Optimalizovat natočení objektu pro dosažení co nejlepší kvality povrchu." +msgid "Open the Slic3r website in your browser" +msgstr "Otevřete webovou stránku Slic3r ve svém prohlížeči" -msgid "" -"Optimize object rotation to have minimum amount of overhangs needing support " -"structures.\n" -"Note that this method will try to find the best surface of the object for " -"touching the print bed if no elevation is set." -msgstr "" -"Optimalizuje natočení objektu tak, aby měl minimální množství převisů " -"vyžadujících podpěry.\n" -"Všimněte si, že tato metoda se pokusí najít nejvhodnější plochu objektu pro " -"dotyk s tiskovou podložkou, pokud není nastavené nadzvednutí objektu nad " -"podložku." +msgid "Opening Configuration Wizard" +msgstr "Otevírání průvodce nastavením" msgid "Optimize orientation" msgstr "Optimalizovat orientaci" @@ -5333,14 +7452,17 @@ msgstr "Optimalizovat orientaci" msgid "Optimize Rotation" msgstr "Optimalizovat Orientaci" +msgid "Optimize the rotation of the object for better print results." +msgstr "Optimalizujte rotaci objektu pro lepší výsledky tisku." + msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" -"Optimalizovat rychloposuny do pořadí aby se minimalizovalo přejíždění " -"perimetrů. Nejvíce užitečné u Bowdenových extruderů které trpí na vytékání " -"filamentu. Toto nastavení zpomaluje tisk i generování G-code." +"Optimalizovat rychloposuny do pořadí aby se minimalizovalo přejíždění perimetrů. " +"Nejvíce užitečné u Bowdenových extruderů které trpí na vytékání filamentu. Toto " +"nastavení zpomaluje tisk i generování G-code." msgid "Options" msgstr "Volby" @@ -5348,15 +7470,15 @@ msgstr "Volby" msgid "Options for support material and raft" msgstr "Volby pro podpěry a raft" +msgid "Options for support material interface" +msgstr "Možnosti kontaktního podpůrného materiálu" + msgid "Options:" msgstr "Možnosti:" msgid "or press \"+\" key" msgstr "nebo stiskněte klávesu „+“" -msgid "Order object volumes by types" -msgstr "Řazení manipulátorů objektu podle typu" - msgid "Orientation found." msgstr "Orientace nalezena." @@ -5375,44 +7497,99 @@ msgstr "Ostatní vrstvy" msgid "Other Vendors" msgstr "Ostatní výrobci" -msgid "Outer and inner brim" -msgstr "Vnější a vnitřní límec" +msgid "Others" +msgstr "Ostatní" -msgid "Outer brim only" -msgstr "Pouze vnější okraj" +msgid "Outer" +msgstr "Vnější" -msgid "Output File" -msgstr "Výstupní soubor" +msgid "Outer XY size compensation" +msgstr "Vnější kompenzace velikosti XY" msgid "Output file" msgstr "Výstupní soubor" +msgid "Output File" +msgstr "Výstupní soubor" + msgid "Output filename format" msgstr "Formát názvu výstupního souboru" +msgid "Output Format" +msgstr "Výstupní formát" + +msgid "Output Method" +msgstr "Výstupní metoda" + msgid "Output Model Info" msgstr "Info o výstupním modelu" msgid "Output options" msgstr "Možnosti výstupu" -msgid "Outside walls" -msgstr "Vnější stěny" +msgid "Over-Bridge calibration" +msgstr "Kalibrace přemostění" -msgid "Overflow" -msgstr "Přetečení" +msgid "Over-bridge calibration" +msgstr "Kalibrace přemostění" + +msgid "Overhang bridge flow threshold" +msgstr "Práh toku převislého mostu" + +msgid "Overhang bridge speed threshold" +msgstr "Práh rychlosti převislého mostu" msgid "Overhang perimeter" msgstr "Perimetr převisu" +msgid "Overhang reversal" +msgstr "Zvrat převisu" + +msgid "Overhang reversal threshold" +msgstr "Práh obrácení převisu" + msgid "Overhang threshold" msgstr "Mezní úhel převisu" +msgid "Overhangs" +msgstr "Převisy" + +msgid "Overhangs speed" +msgstr "Rychlost Převisů" + msgid "Overlap" msgstr "Překrytí" +msgid "" +"Overlap between the thin wall and the perimeters. Can be a % of the external " +"perimeter width (default 50%)" +msgstr "" +"Přesah mezi tenkou stěnou a perimetery. Může být % vnějšího šířka perimeteru " +"(výchozí 50%)" + +msgid "Overlapping all perimeters" +msgstr "Překrývající se všechny perimetery" + +msgid "Overlapping external perimeter" +msgstr "Překrývající se vnější perimeter" + +msgid "" +"Override the retract_length setting from the printer config. Used for " +"calibration. Set negative to disable" +msgstr "" +"Přepsat nastavení retract_length z konfigurace tiskárny. Používá se pro " +"calibration. Set negative to disable" + +msgid "" +"Override the temperature of the extruder. Avoid making too many changes, it " +"won't stop for cooling/heating. 0 to disable. May only work on Height range " +"modifiers." +msgstr "" +"Přepište teplotu extrudéru. Neprovádějte příliš mnoho změn, to nezastaví se kvůli " +"chlazení/topení. 0 pro deaktivaci. Může fungovat pouze v rozsahu výškymodifikátory." + msgid "P&rint Settings Tab" -msgstr "Panel Nastavení &tisku" +msgstr "Panel Nastavení &Tisku" msgid "Pad" msgstr "Podložka" @@ -5456,27 +7633,12 @@ msgstr "Page Down" msgid "Page Up" msgstr "Page Up" -msgid "Paint-on seam" -msgstr "Malování pozice švu" - msgid "Paint-on supports" msgstr "Malování podpěr" msgid "Paints all facets inside, regardless of their orientation." msgstr "Maluje na všechny facety bez ohledu na jejich orientaci." -msgid "Paints facets according to the chosen painting brush." -msgstr "Maluje fasety podle zvoleného typu štětce." - -msgid "" -"Paints neighboring facets whose relative angle is less or equal to set angle." -msgstr "" -"Vybarví sousední fasety, jejichž relativní úhel je menší nebo roven " -"nastavenému úhlu." - -msgid "Paints only one facet." -msgstr "Maluje pouze jeden facet." - msgid "parameter name" msgstr "název parametru" @@ -5516,12 +7678,26 @@ msgstr "Vložit ze schránky" msgid "Paste From Clipboard" msgstr "Vložení ze schránky" +msgid "Paths" +msgstr "Cesty" + msgid "Pattern" msgstr "Vzor" msgid "Pattern angle" msgstr "Úhel vzoru" +msgid "Pattern for interface layers." +msgstr "Vzor pro kontaktní vrstvy." + +msgid "" +"Pattern for the ear. The concentric is the default one. The rectilinear has " +"a perimeter around it, you can try it if the concentric has too many " +"problems to stick to the build plate." +msgstr "" +"Vzor pro ucho. Soustředný je výchozí. Přímý má perimetr kolem něj, můžete to " +"zkusit, pokud má soustředný příliš mnohoproblémy s lepením na stavební desku." + msgid "Pattern spacing" msgstr "Rozteč podpěr" @@ -5531,11 +7707,24 @@ msgstr "Vzor použitý pro generování podpěr." msgid "Pause" msgstr "Pozastavení" +msgid "Pause before extraction " +msgstr "Pauza před extrakcí " + +msgid "Pause in melt zone" +msgstr "Pauza v zóně tání" + msgid "Pause print (\"%1%\")" msgstr "Pozastavení tisku (\"%1%\")" msgid "Pause Print G-code" -msgstr "G-code pro pozastavení tisku" +msgstr "G-Code pro pozastavení tisku" + +msgid "" +"Percent of a flow rate relative to object's normal layer height. It's the " +"percentage of the layer that will be over-extruded on top to do the ironing." +msgstr "" +"Procento průtoku vzhledem k normální výšce vrstvy objektu. Je to procento vrstvy, " +"která bude nadměrně vytlačena nahoře za účelem ironing." msgid "Percentage" msgstr "Procentuálně" @@ -5543,32 +7732,63 @@ msgstr "Procentuálně" msgid "Perform cut" msgstr "Provést řez" -msgid "" -"Perform desktop integration (Sets this binary to be searchable by the " -"system)." -msgstr "" -"Provést integraci do systému (Nastaví tuto binárku tak, aby ji systém mohl " -"prohledávat)." - msgid "" "Performance vs accuracy of calculation. Lower values may produce unwanted " "artifacts." msgstr "" -"Rychlost vs. přesnost výpočtu. Nižší hodnoty mohou způsobit nežádoucí " -"artefakty." +"Rychlost vs. přesnost výpočtu. Nižší hodnoty mohou způsobit nežádoucí artefakty." msgid "Perimeter" msgstr "Perimetr" +msgid "perimeter" +msgstr "Perimetr" + +msgid "Perimeter acceleration" +msgstr "Zrychlení Perimetru" + +msgid "Perimeter anchor" +msgstr "Kotva perimetru" + +msgid "Perimeter bonding" +msgstr "Spojení perimetru" + msgid "Perimeter extruder" msgstr "Extruder pro perimetry" +msgid "Perimeter loop seam" +msgstr "Obvodový smyčkový šev" + +msgid "perimeter overlap" +msgstr "přesah perimetru" + +msgid "Perimeter overlap" +msgstr "Přesah perimetru" + +msgid "Perimeter spacing" +msgstr "Obvodová vzdálenost" + +msgid "Perimeter speed" +msgstr "Rychlost perimetru" + +msgid "Perimeter width" +msgstr "Šířka perimetru" + msgid "perimeters" msgstr "perimetry" msgid "Perimeters" msgstr "Perimetry" +msgid "Perimeters & Shell" +msgstr "Perimetry a skořepina" + +msgid "Perimeters count" +msgstr "Počet perimetrů" + +msgid "Perimeters loop" +msgstr "Perimetery s jednou smyčkou" + msgid "Physical Printer" msgstr "Fyzická tiskárna" @@ -5576,14 +7796,17 @@ msgid "Physical printers" msgstr "Fyzické tiskárny" msgid "Pick another vendor supported by %s" -msgstr "Vyberte si jiného výrobce, který je podporováný programem %s" +msgstr "Vyberte si jiného výrobce, který je podporovaný programem %s" msgid "" "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the " "following format: \"XxY, XxY, ...\"" msgstr "" -"Velikosti obrázků budou uloženy do souborů .gcode / .sl1 / .sl1s, v " -"následujícím formátu: \"XxY, XxY, ...\"" +"Velikosti obrázků budou uloženy do souborů .gcode / .sl1 / .sl1s, v následujícím " +"formátu: \"XxY, XxY, ...\"" + +msgid "Pigment percentage" +msgstr "Procento pigmentu" msgid "Pillar connection mode" msgstr "Způsob propojení podpěr" @@ -5612,19 +7835,24 @@ msgstr "Umístit plochou na podložku" msgid "Plater" msgstr "Podložka" +msgid "Platter" +msgstr "Jen pokud na podnose" + +msgid "Please check and fix your object list." +msgstr "Zkontrolujte a opravte seznam objektů." + msgid "Please check your object list before preset changing." msgstr "Před změnou nastavení zkontrolujte prosím seznam objektů." -msgid "" -"Please save your project and restart PrusaSlicer. We would be glad if you " -"reported the issue." -msgstr "" -"Uložte projekt a restartujte PrusaSlicer. Budeme rádi, když nám problém " -"nahlásíte." - msgid "Please select the file to reload" msgstr "Vyberte soubor, který chcete znovu načíst" +msgid "Polyhole detection margin" +msgstr "Detekovat okraj mnohonásobného otvoru" + +msgid "Polyhole twist" +msgstr "Kroucení mnohonásobného otvoru" + msgid "Portions copyright" msgstr "Autorská práva" @@ -5637,11 +7865,24 @@ msgstr "Pozice" msgid "Position of perimeters starting points." msgstr "Pozice začátku perimetrů." -msgid "Post processing scripts shall modify G-code file in place." -msgstr "Post-processing skripty musí G-code upravit in place." +msgid "" +"Position of perimeters' starting points.\n" +" " +msgstr "" +"Pozice začátku perimetrů.\n" +" " + +msgid "Post-processing milling" +msgstr "Následné-Zpracování frézováním" + +msgid "Post-processing script" +msgstr "Následné-Zpracování skript" msgid "Post-processing scripts" -msgstr "Post-processing skripty" +msgstr "Následné-Zpracování skript" + +msgid "Precision" +msgstr "Přesnost" msgid "Preferences" msgstr "Nastavení" @@ -5658,13 +7899,6 @@ msgstr "Příprava výplně" msgid "Preparing settings tabs" msgstr "Příprava karet s nastavením" -msgid "" -"Preselects faces by overhang angle. It is possible to restrict paintable " -"facets to only preselected faces when the option \"%1%\" is enabled." -msgstr "" -"Předvybere plochy podle úhlu převisu. Pokud je povolena volba \"%1%\", je " -"možné omezit namalované plochy pouze na předem vybrané plochy." - msgid "Preset \"%1%\" has the following unsaved changes:" msgstr "Přednastavení \"%1%\"má následující neuložené změny:" @@ -5679,8 +7913,8 @@ msgid "" "Preset \"%1%\" is not compatible with the new printer profile and it has the " "following unsaved changes:" msgstr "" -"Přednastavení \"%1%\" není kompatibilní s novým profilem tiskárny a má " -"následující neuložené změny:" +"Přednastavení \"%1%\" není kompatibilní s novým profilem tiskárny a má následující " +"neuložené změny:" msgid "" "Preset with name \"%1%\" already exists and is incompatible with selected " @@ -5692,16 +7926,8 @@ msgstr "" msgid "Preset with name \"%1%\" already exists." msgstr "Přednastavení s názvem \"%1%\" již existuje." -msgid "" -"Presets are different.\n" -"Click this button to select the same preset for the right and left preset." -msgstr "" -"Přednastavení se liší.\n" -"Kliknutím na toto tlačítko vyberete stejná nastavení pro pravé i levé " -"přednastavení." - -msgid "Presets are the same" -msgstr "Přednastavení jsou shodná" +msgid "Presets and updates" +msgstr "Aktualizace" msgid "Press %1%left mouse button to enter the exact value" msgstr "Pro zadání přesné hodnoty stiskni %1%levé tlačítko myši" @@ -5726,6 +7952,13 @@ msgstr "" "5× zrychlíte pohyb posuvníku pomocí\n" "šipek nebo kolečkem myši" +msgid "" +"Prevent the gcode builder from triggering an exception if a full layer is " +"empty, and allow the print to start from thin air afterward." +msgstr "" +"Zabránit staviteli gcode ve spuštění výjimky, pokud je plná vrstvavyprázdněte a " +"poté nechte tisk začít ze vzduchu." + msgid "Preview" msgstr "Náhled" @@ -5747,12 +7980,38 @@ msgstr "Tisk" msgid "Print &Host Upload Queue" msgstr "Fronta na&hrávání do tiskového serveru" +msgid "Print a calibration cube, for various calibration goals." +msgstr "Vytiskněte si kalibrační kostku pro různé kalibrační cíle." + +msgid "Print all brim at startup" +msgstr "Při spuštění vytiskněte všechny límce" + +msgid "Print at the end" +msgstr "Konec G-code" + msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "" -"Tisk obrysových perimetrů od vnějších po vnitřní namísto opačného výchozího " -"pořadí." +"Tisk obrysových perimetrů od vnějších po vnitřní namísto opačného výchozího pořadí." + +msgid "" +"Print contour perimeters in two circles, in a continuous way, like for a " +"vase mode. It needs the external_perimeters_first parameter to work. \n" +"Doesn't work for the first layer, as it may damage the bed overwise. \n" +"Note that it will use min_layer_height from your hardware setting as the " +"base height (it doesn't start at 0), so be sure to put here the lowest value " +"your printer can handle. if it's not lower than two times the current layer " +"height, it falls back to the normal algorithm, as there is not enough room " +"to do two loops." +msgstr "" +"Tisk obrysových Perimeterů ve dvou kruzích souvisle, jako v režimu vázy. Ke své " +"činnosti potřebuje parametr external_perimeters_first. \n" +"Nefunguje pro první vrstvu, protože může poškodit postel. \n" +"Všimněte si, že jako základní výšku použije min_layer_height z vašeho hardwarového " +"nastavení (nezačíná na 0), takže nezapomeňte zadat nejnižší hodnotu, kterou vaše " +"tiskárna zvládne. pokud není nižší než dvojnásobek aktuální výšky vrstvy , vrátí se " +"zpět k normálnímu algoritmu, protože není dostatek místa pro provedení dvou smyček." msgid "Print Diameters" msgstr "Parametry extruderu" @@ -5769,23 +8028,43 @@ msgstr "Režim tisku" msgid "Print pauses" msgstr "Pauzy tisku" +msgid "Print remaining times" +msgstr "Podpora zbývajících tiskových časů" + msgid "Print settings" -msgstr "Nastavení tisku" +msgstr "Nastavení Tisku" msgid "Print Settings" -msgstr "Nastavení tisku" +msgstr "Nastavení Tisku" msgid "Print Settings Tab" -msgstr "Panel Nastavení tisku" - -msgid "Print speed" -msgstr "Rychlost tisku" +msgstr "Panel Nastavení Tisku" msgid "Print speed override" msgstr "Přepsání rychlosti tisku" +msgid "" +"print speed will be reduced so that no less than %1%s are spent on that layer" +msgstr "" +"rychlost tisku bude snížena tak, aby na tuto vrstvu nebylo vynaloženo méně než %1%s" + +msgid "" +"Print the thumbnail code at the end of the gcode file instead of the front.\n" +"Be careful! Most firmwares expect it at the front, so be sure that your " +"firmware support it." +msgstr "" +"Vytiskněte kód miniatury na konec souboru gcode místo na přední stranu.\n" +"Buďte opatrní! Většina firmwarů to očekává na přední straně, takže se ujistěte, že " +"to váš firmware podporuje." + +msgid "Print z" +msgstr "Tisk ve výšce" + msgid "Print&er Settings Tab" -msgstr "Panel Nastav&ení tiskárny" +msgstr "Panel Nastav&ení Tiskárny" + +msgid "Printable" +msgstr "Tisknout objekt" msgid "printer" msgstr "tiskárna" @@ -5805,35 +8084,17 @@ msgstr "model tiskárny" msgid "Printer notes" msgstr "Poznámky o tiskárně" -msgid "Printer preset names" -msgstr "Názvy přednastavení tiskáren" +msgid "Printer preset name" +msgstr "Název přednastavení tiskárny" msgid "Printer scaling correction" msgstr "Korekce měřítka tisku" -msgid "Printer scaling correction in X axis" -msgstr "Korekce měřítka v ose X" - -msgid "Printer scaling correction in Y axis" -msgstr "Korekce měřítka v ose Y" - -msgid "Printer scaling correction in Z axis" -msgstr "Korekce měřítka v ose Z" - -msgid "Printer scaling X axis correction" -msgstr "Korekce měřítka v ose X" - -msgid "Printer scaling Y axis correction" -msgstr "Korekce měřítka v ose Y" - -msgid "Printer scaling Z axis correction" -msgstr "Korekce měřítka v ose Z" - msgid "Printer Settings" -msgstr "Nastavení tiskárny" +msgstr "Nastavení Tiskárny" msgid "Printer Settings Tab" -msgstr "Panel Nastavení tiskárny" +msgstr "Panel Nastavení Tiskárny" msgid "Printer technology" msgstr "Technologie tisku" @@ -5859,14 +8120,19 @@ msgid "" "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" -"Tisk s více extrudery různých průměrů trysek. Má-li být podpěra tisknuta " -"aktuálním extruderem (support_material_extruder == 0 nebo " -"support_material_interface_extruder == 0), musí mít všechny trysky stejný " -"průměr." +"Tisk s více extrudery různých průměrů trysek. Má-li být podpěra tisknuta aktuálním " +"extruderem (support_material_extruder == 0 nebo support_material_interface_extruder " +"== 0), musí mít všechny trysky stejný průměr." msgid "Processing %s" msgstr "Zpracovávám %s" +msgid "Processing limit" +msgstr "Limit zpracování" + +msgid "Processing triangulated mesh" +msgstr "Zpracovávám triangulační sítě" + msgid "Profile dependencies" msgstr "Profilové závislosti" @@ -5879,23 +8145,23 @@ msgstr "Průběh" msgid "Progress:" msgstr "Průběh:" -msgid "Project is loading" -msgstr "Projekt se načítá" +msgid "Prusa FFF Technology Printers" +msgstr "Prusa tiskárny technologie FFF" -msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" -msgstr "PrusaSlicer narazil na fatální chybu: \"%1%\"" +msgid "Prusa MSLA Technology Printers" +msgstr "Prusa tiskárny technologie MSLA" -msgid "PrusaSlicer: Open hyperlink" -msgstr "PrusaSlicer: Otevřít hypertextový odkaz" +msgid "Prusa SL1" +msgstr "Importovat archiv SL1 / SL1S" msgid "" "Purging after toolchange will be done inside this object's infills. This " "lowers the amount of waste but may result in longer print time due to " "additional travel moves." msgstr "" -"Vyčištění trysky po změně extruderu se provede uvnitř výplní tohoto objektu. " -"Tím se sníží množství odpadu, ale může to mít za následek delší dobu tisku " -"kvůli dalším pohybům." +"Vyčištění trysky po změně extruderu se provede uvnitř výplní tohoto objektu. Tím se " +"sníží množství odpadu, ale může to mít za následek delší dobu tisku kvůli dalším " +"pohybům." msgid "Purging volumes" msgstr "Objemy čištění" @@ -5909,6 +8175,27 @@ msgstr "Objemy čištění - matice" msgid "Purpose of Machine Limits" msgstr "Účel limitů stroje" +msgid "" +"Put here the gcode to change the toolhead (called after the g-code " +"T{next_extruder}). You have access to {next_extruder} and " +"{previous_extruder}. next_extruder is the 'extruder number' of the new " +"milling tool, it's equal to the index (begining at 0) of the milling tool " +"plus the number of extruders. previous_extruder is the 'extruder number' of " +"the previous tool, it may be a normal extruder, if it's below the number of " +"extruders. The number of extruder is available at {extruder} and the number " +"of milling tool is available at {milling_cutter}." +msgstr "" +"Sem vložte gcode pro změnu hlavy nástroje (nazývá se po g-kódu T{next_extruder}). " +"Máte přístup k {next_extruder} a {previous_extruder}. next_extruder je ‚číslo " +"extrudéru‘ nového frézovacího nástroje, rovná se index (začínající na 0) " +"frézovacího nástroje plus počet extruderů. previous_extruder je „číslo extrudéru“ " +"předchozího nástroje, může to být běžný extrudér, pokud je nižší než počet " +"extruderů. Počet extruderů je k dispozici na {extruder} a počet frézovacích " +"nástrojů je k dispozici na {milling_cutter}." + +msgid "Quadratric" +msgstr "Kvadratický" + msgid "Quality" msgstr "Kvalita" @@ -5918,6 +8205,12 @@ msgstr "Kvalita / Rychlost" msgid "Quick" msgstr "Rychlé" +msgid "Quick Add Settings (%s)" +msgstr "Rychlé přidání nastavení (%s)" + +msgid "Quick Save" +msgstr "Rychlé Slicování a Uložit jako" + msgid "Quick Slice" msgstr "Rychlé Slicování" @@ -5936,12 +8229,6 @@ msgstr "Rádius" msgid "Raft" msgstr "Raft" -msgid "Raft contact Z distance" -msgstr "Mezera mezi objektem a raftem v ose Z" - -msgid "Raft expansion" -msgstr "Rozšíření raftu" - msgid "Raft layers" msgstr "Vrstev raftu" @@ -5959,13 +8246,12 @@ msgid "" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" -"Rapidní extruze označuje rychlé vytlačení filamentu těsně před jeho výměnou " -"za jiný v multi material tiskárně s jedním extruderem. Účelem je správně " -"vytvarovat konec vysouvaného filamentu tak, aby neblokoval zasunutí nového " -"filamentu a také mohl být sám později opětovně zasunut. Tento proces je " -"důležitý a rozdílné materiály mohou pro získání optimálního tvaru vyžadovat " -"různé rychlosti extruze. Z tohoto důvodu jsou objemové průtoky při rapidní " -"extruzi uživatelsky upravitelné.\n" +"Rapidní extruze označuje rychlé vytlačení filamentu těsně před jeho výměnou za jiný " +"v multi material tiskárně s jedním extruderem. Účelem je správně vytvarovat konec " +"vysouvaného filamentu tak, aby neblokoval zasunutí nového filamentu a také mohl být " +"sám později opětovně zasunut. Tento proces je důležitý a rozdílné materiály mohou " +"pro získání optimálního tvaru vyžadovat různé rychlosti extruze. Z tohoto důvodu " +"jsou objemové průtoky při rapidní extruzi uživatelsky upravitelné.\n" "\n" "Toto nastavení je určeno pro pokročilé uživatele, nesprávné nastavení velmi " "pravděpodobně povede k zaseknutí filamentu, vybroušení filamentu podávacím " @@ -5986,8 +8272,8 @@ msgstr "Nastavení rapidní extruze" msgid "Random" msgstr "Náhodný" -msgid "Random sequence" -msgstr "Náhodná sekvence" +msgid "Random splash screen" +msgstr "Náhodná úvodní obrazovka" msgid "Range" msgstr "Rozsah" @@ -5995,7 +8281,7 @@ msgstr "Rozsah" msgid "Rasterizing layers" msgstr "Rasterizace vrstev" -msgid "Re&load from Disk" +msgid "Re&load from disk" msgstr "Znovu &načíst z disku" msgid "Re-configure" @@ -6004,6 +8290,9 @@ msgstr "Přenastavit" msgid "Ready" msgstr "Připraveno" +msgid "Ready to slice" +msgstr "Připraven ke slicování" + msgid "Rear" msgstr "Zezadu" @@ -6013,12 +8302,35 @@ msgstr "Pohled zezadu" msgid "Recent projects" msgstr "N&edávné projekty" +msgid "" +"Recommended min extrusion width for other layers (with a layer height of " +"%1%) is %2$.3f mm (or %3%%%).\n" +msgstr "" +"Doporučená min šířka vysunutí pro ostatní vrstvy (s výškou vrstvy %1%) je %2$.3f mm " +"(nebo %3%%%).\n" + +msgid "" +"Recommended min extrusion width for the first layer (with a first layer " +"height of %1%) is %2$.3f mm (or %3%%%)\n" +msgstr "" +"Doporučená min šířka vysunutí pro první vrstvu (s výškou první vrstvy %1%) je " +"%2$.3f mm (nebo %3%%%)\n" + +msgid "Recommended object min (thick) wall thickness for layer height %.2f and" +msgstr "Doporučená min tloušťka stěny objektu pro výšku vrstvy %.2f a" + +msgid "" +"Recommended object min thin wall thickness: Not available due to invalid " +"layer height." +msgstr "" +"Doporučený objekt min. tloušťka tenké stěny: Není k dispozici kvůli neplatné výšce " +"vrstvy." + msgid "" "Recommended object thin wall thickness: Not available due to excessively " "small extrusion width." msgstr "" -"Doporučená tloušťka stěny objektu: Není k dispozici kvůli příliš malé šířce " -"extruze." +"Doporučená tloušťka stěny objektu: Není k dispozici kvůli příliš malé šířce extruze." msgid "Recreating" msgstr "Obnovení" @@ -6029,6 +8341,9 @@ msgstr "Obdélníkový" msgid "Rectilinear" msgstr "Přímočarý" +msgid "Rectilinear (filled)" +msgstr "Přímý (vyplněný)" + msgid "Rectilinear grid" msgstr "Přímočará mřížka" @@ -6037,31 +8352,22 @@ msgstr "Vpřed" msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" -msgstr[0] "%1$d Akce Vpřed" -msgstr[1] "%1$d Akce Vpřed" -msgstr[2] "%1$d Akcí Vpřed" -msgstr[3] "%1$d Akcí Vpřed" +msgstr[0] "Vpřed %1$d Akce" +msgstr[1] "Vpřed %1$d Akcí" +msgstr[2] "Vpřed %1$d Akci" +msgstr[3] "Vpřed %1$d Akci" msgid "Redo History" msgstr "Historie operací Vpřed" -msgid "Reduced overhang slopes" -msgstr "Snížené sklony převisů" - msgid "Reducing printing time" msgstr "Zkracování tiskového času" msgid "Refresh Printers" msgstr "Obnovit tiskárny" -msgid "Regular" -msgstr "Obvyklý" - -msgid "Regular expression" -msgstr "Regulární výraz" - -msgid "Release only" -msgstr "Pouze stabilní verze" +msgid "Related printer preset name" +msgstr "Název souvisejícího přednastavení tiskárny" msgid "Reload all from disk" msgstr "Vše znovu načíst z disku" @@ -6072,11 +8378,20 @@ msgstr "Znovu načíst z disku" msgid "Reload from:" msgstr "Znovu načíst z:" +msgid "Reload platter from disk" +msgstr "Vše znovu načíst z disku" + msgid "Reload the plater from disk" msgstr "Znovu načíst podložku z disku" -msgid "Remaining errors" -msgstr "Zbylé chyby" +msgid "Reload the platter from disk" +msgstr "Vše znovu načíst z disku" + +msgid "Reload the selected object from disk" +msgstr "Znovu načíst vybraný objekt z disku" + +msgid "Reload the selected volumes from disk" +msgstr "Znovu načíst vybrané objekty z disku" msgid "Remaining time" msgstr "Zbývající čas" @@ -6087,6 +8402,9 @@ msgstr "Zapamatovat moji volbu" msgid "Remember output directory" msgstr "Pamatovat si výstupní složku" +msgid "Remember to check for updates at %s" +msgstr "Nezapomeňte zkontrolovat aktualizace na %s" + msgid "Remove" msgstr "Odebrat" @@ -6108,6 +8426,9 @@ msgstr "Ubrat detail" msgid "Remove extruder from sequence" msgstr "Odebrat extruder ze seznamu" +msgid "Remove fil. slowdown" +msgstr "Odebrat" + msgid "Remove instance" msgstr "Odebrat instanci" @@ -6117,18 +8438,15 @@ msgstr "Odebrat instanci vybraného objektu" msgid "Remove layer range" msgstr "Odstranit rozsah vrstev" -msgid "Remove Multi Material painting" -msgstr "Odstranění Multimateriálového malování" - -msgid "Remove paint-on seam" -msgstr "Odstranění namalovaného švu" - -msgid "Remove paint-on supports" -msgstr "Odstranění malování podpěr" +msgid "Remove one instance of the selected object" +msgstr "Odebere jednu instanci vybraného objektu" msgid "Remove parameter" msgstr "Odebrat parametr" +msgid "Remove perimeters" +msgstr "Odstraňte Perimetery" + msgid "Remove point" msgstr "Odebrat bod" @@ -6144,11 +8462,14 @@ msgstr "Odebrat označené body" msgid "Remove selection" msgstr "Odebrat výběr" +msgid "Remove the selected object" +msgstr "Odstranit vybraný objekt" + msgid "Remove user profiles (a snapshot will be taken beforehand)" msgstr "Odstranit uživatelské profily (předtím bude proveden snapshot)" -msgid "Remove variable layer height" -msgstr "Odstranění proměnné výšky vrstvy" +msgid "Rename" +msgstr "Přejmenovat" msgid "Rename Object" msgstr "Přejmenování objektu" @@ -6163,8 +8484,8 @@ msgid "" "Renaming of the G-code after copying to the selected destination folder has " "failed. Current path is %1%.tmp. Please try exporting again." msgstr "" -"Přejmenování G-codu po zkopírování do vybrané cílové složky se nezdařilo. " -"Aktuální cesta je %1%.tmp. Zkuste to prosím znovu." +"Přejmenování G-codu po zkopírování do vybrané cílové složky se nezdařilo. Aktuální " +"cesta je %1%.tmp. Zkuste to prosím znovu." msgid "Render" msgstr "Render" @@ -6176,8 +8497,8 @@ msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" -"Vykreslení pomocí softwaru. Namísto výchozího ovladače OpenGL je načten " -"dodaný softwarový renderer MESA." +"Vykreslení pomocí softwaru. Namísto výchozího ovladače OpenGL je načten dodaný " +"softwarový renderer MESA." msgid "Repair" msgstr "Oprava" @@ -6194,30 +8515,15 @@ msgstr "Opravený soubor 3MF neobsahuje žádný objekt" msgid "Repaired 3MF file does not contain any volume" msgstr "Opravený soubor 3MF neobsahuje žádný objemové těleso" -msgid "Repairing model" -msgstr "Oprava modelu" - msgid "Repairing model by the Netfabb service" msgstr "Opravování modelu službou Netfabb" -msgid "Repairing was canceled" -msgstr "Oprava byla zrušena" - msgid "Repeat Last Quick Slice" msgstr "Opakovat poslední rychlé slicování" msgid "Repeat last quick slice" msgstr "Opakovat poslední rychlé slicování" -msgid "Replace from:" -msgstr "Nahradit z:" - -msgid "Replace with" -msgstr "Nahradit" - -msgid "Replace with STL" -msgstr "Nahradit STL souborem" - msgid "Replace?" msgstr "Nahradit?" @@ -6269,11 +8575,11 @@ msgstr "Obnovit na výchozí" msgid "Reset to Filament Color" msgstr "Obnovit na barvu filamentu" -msgid "Restart application" -msgstr "Restart aplikace" +msgid "Resolution" +msgstr "Rozlišení" -msgid "Restore window position on start" -msgstr "Obnovení polohy okna při spuštění" +msgid "Retr." +msgstr "Zezadu." msgid "Retract amount before wipe" msgstr "Délka retrakce před očištěním" @@ -6284,15 +8590,19 @@ msgstr "Retrakce při změně vrstvy" msgid "Retraction" msgstr "Retrakce" +msgid "Retraction calibration" +msgstr "Kalibrace retrakce" + msgid "" "Retraction is not triggered when travel moves are shorter than this length." -msgstr "" -"Retrakce není spuštěna, pokud jsou rychloposuny pojezdu kratší než tato " -"délka." +msgstr "Retrakce není spuštěna, pokud jsou rychloposuny pojezdu kratší než tato délka." msgid "Retraction Length" msgstr "Vzdálenost retrakce" +msgid "Retraction length" +msgstr "Vzdálenost retrakce" + msgid "Retraction Length (Toolchange)" msgstr "Vzdálenost retrakce (při změně extruderu)" @@ -6300,25 +8610,27 @@ msgid "Retraction Speed" msgstr "Rychlost retrakce" msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)" -msgstr "" -"Retrakce pro neaktivní extruder (pokročilé nastavení pro tiskárny typu " +msgstr "Retrakce pro neaktivní extruder (pokročilé nastavení pro tiskárny typu " "MultiMaterial)" +msgid "Retraction wipe" +msgstr "Retrakce očištění" + msgid "Retractions" msgstr "Retrakce" msgid "Reverse direction of zoom with mouse wheel" msgstr "Reverzovat funkci kolečka myši při zoomu" -msgid "Revert color to default" -msgstr "Vrátit barvu na výchozí" +msgid "Reverse on odd" +msgstr "Reverzní na liché" + +msgid "Reverse threshold" +msgstr "Reverzní práh" msgid "Revert conversion from imperial units" msgstr "Vrátit převod z imperiálních jednotek" -msgid "Revert conversion from meters" -msgstr "Vrátit převod z metrů" - msgid "Review the substitutions and adjust them if needed." msgstr "Zkontrolujte náhrady a případně je upravte." @@ -6326,16 +8638,13 @@ msgid "Right" msgstr "Zprava" msgid "Right button click the icon to change the object printable property" -msgstr "" -"Klepnutím pravým tlačítkem myši na ikonu změníte nastavení tisku pro objekt" +msgstr "Klepnutím pravým tlačítkem myši na ikonu změníte nastavení tisku pro objekt" msgid "Right button click the icon to change the object settings" msgstr "Klepnutím pravým tlačítkem myši na ikonu změníte nastavení objektu" msgid "Right button click the icon to fix STL through Netfabb" -msgstr "" -"Klepnutím pravým tlačítkem myši se spustí oprava STL souboru pomocí služby " -"Netfabb" +msgstr "Klepnutím pravým tlačítkem myši se spustí oprava STL souboru pomocí služby Netfabb" msgid "Right click" msgstr "Pravý klik" @@ -6346,8 +8655,8 @@ msgstr "Pravé tlačítko myši" msgid "Right mouse button:" msgstr "Pravé tlačítko myši:" -msgid "Right Preset Value" -msgstr "Hodnota pravého přednastavení" +msgid "Right panel" +msgstr "Pravý panel" msgid "Right View" msgstr "Pohled zprava" @@ -6365,14 +8674,13 @@ msgid "Rotate lower part upwards" msgstr "Otočit spodní část řezem dolů" msgid "Rotate selection 45 degrees CCW" -msgstr "Otočení výběru o 45 ° proti směru hodinových ručiček" +msgstr "Otočení výběru o 45° proti směru hodinových ručiček" msgid "Rotate selection 45 degrees CW" -msgstr "Otočení výběru o 45 ° po směru hodinových ručiček" +msgstr "Otočení výběru o 45° po směru hodinových ručiček" -msgid "Rotate the model to have the lowest z height for faster print time." -msgstr "" -"Otočit model tak, aby měl co nejmenší výšku, čímž se zkrátí doba tisku." +msgid "Rotate the polyhole every layer." +msgstr "Otočte polyhole každou vrstvu." msgid "Rotation" msgstr "Otáčení" @@ -6386,23 +8694,32 @@ msgstr "Úhel otočení kolem osy Y ve stupních." msgid "Rotation angle around the Z axis in degrees." msgstr "Úhel otočení kolem osy Z ve stupních." +msgid "Round corners" +msgstr "Zaoblení roh" + +msgid "Round corners for perimeters" +msgstr "Zaoblené rohy pro perimetry" + +msgid "Roundness margin" +msgstr "Zaoblený okraj" + msgid "Ruler mode" msgstr "Režim pravítka" msgid "Run %s" msgstr "Spustit %s" +msgid "Run the fan at default speed when possible" +msgstr "Pokud je to možné, spusťte ventilátor na výchozí rychlost" + msgid "Running post-processing scripts" -msgstr "Vykonávají se postprodukční skripty" +msgstr "Vykonávají se Následné-Zpracování skripty" msgid "S&end G-code" -msgstr "Od&eslat G-code" +msgstr "&Odeslat G-code" msgid "S&end to print" -msgstr "Od&eslat do tiskárny" - -msgid "Same as top" -msgstr "Stejné jako vrchní" +msgstr "&Odeslat do tiskárny" msgid "Save" msgstr "Uložit" @@ -6413,6 +8730,9 @@ msgstr "Uložit %s jako:" msgid "Save %s file as:" msgstr "Uložit %s soubor jako:" +msgid "Save changes?" +msgstr "Uložit změny?" + msgid "Save config file" msgstr "Uložit konfigurační soubor" @@ -6446,9 +8766,6 @@ msgstr "Uložit přednastavení" msgid "Save presets bundle as:" msgstr "Uložit balík přednastavení jako:" -msgid "Save project" -msgstr "Uložit projekt" - msgid "Save Project &as" msgstr "Uložit Projekt j&ako" @@ -6461,11 +8778,8 @@ msgstr "Uložit projekt jako (3mf)" msgid "Save SL1 / SL1S file as:" msgstr "Uložit SL1 / SL1S soubor jako:" -msgid "Save support points?" -msgstr "Uložit podpěrné body?" - msgid "Save the selected options to preset \"%1%\"." -msgstr "Uloží vybraná nastaneví do přednastavení \"%1%\"." +msgstr "Uloží vybraná nastavení do přednastavení \"%1%\"." msgid "Save the selected options." msgstr "Uložte vybrané možnosti." @@ -6476,12 +8790,19 @@ msgstr "Uložit ZIP soubor jako:" msgid "Saving mesh into the 3MF container failed." msgstr "Ukládání meshe do 3MF kontejneru selhalo." +msgid "Sawtooth" +msgstr "Pilový zub" + msgid "Scale" msgstr "Měřítko" msgid "Scale factors" msgstr "Měřítka" +msgid "Scale the selected object to fit the print volume" +msgstr "" +"Přizpůsobit měřítko vybraného objektu, aby se objekt vešel do tiskového objemu" + msgid "Scale To Fit" msgstr "Vyplnit tiskový objem" @@ -6491,17 +8812,36 @@ msgstr "Vyplnit tiskový objem" msgid "Scale to fit the given volume." msgstr "Změnit velikost, aby se objekt vešel do zadaného tiskového prostoru." +msgid "Scale to print volume" +msgstr "Změnit velikost podle tiskového objemu" + msgid "Scaling factor or percentage." msgstr "Procentuální měřítko." +msgid "Scattered Rectilinear" +msgstr "Přímočará" + msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "" -"Plánování nahrávání do `%1%`. Viz Okno -> Fronta nahrávaní do tiskového " -"serveru" +msgstr "Plánování nahrávání do `%1%`. Viz Okno -> Fronta nahrávaní do tiskového serveru" + +msgid "Script help page" +msgstr "Stránka nápovědy skriptu" + +msgid "Seam" +msgstr "Šev" + +msgid "Seam angle cost" +msgstr "Cena úhlu švu" + +msgid "Seam gap" +msgstr "Mezera švu" msgid "Seam painting" msgstr "Malování pozice švu" +msgid "Seam Position" +msgstr "Pozice švu" + msgid "Seam position" msgstr "Pozice švu" @@ -6511,8 +8851,8 @@ msgstr "Preferovaný směr švu" msgid "Seam preferred direction jitter" msgstr "Seam preferred direction jitter" -msgid "Seams" -msgstr "Švy" +msgid "Seam travel cost" +msgstr "Náklady" msgid "Searc&h" msgstr "Vy&hledávání" @@ -6520,6 +8860,17 @@ msgstr "Vy&hledávání" msgid "Search" msgstr "Vyhledávání" +msgid "" +"Search for almost-circular holes that span more than one layer and convert " +"the geometry to polyholes. Use the nozzle size and the (biggest) diameter to " +"compute the polyhole.\n" +"See http://hydraraptor.blogspot.com/2011/02/polyholes.html" +msgstr "" +"Hledejte téměř kruhové díry, které přesahují jednu vrstvu, a převeďte geometrii na " +"mnohonásobné díry. K výpočtu vícenásobné díry použijte velikost trysky a (největší) " +"průměr.\"\n" +"Viz http://hydraraptor.blogspot.com/2011/02/polyholes.html" + msgid "Search in English" msgstr "Hledat v angličtině" @@ -6535,27 +8886,31 @@ msgstr "Hledám zařízení" msgid "Searching for optimal orientation" msgstr "Hledání optimální orientace" -msgid "See Download page." -msgstr "Viz stránka ke stažení." - msgid "See more." msgstr "Více." msgid "See Releases page." msgstr "Viz stránka s releasy." -msgid "Select a file" -msgstr "Vyberte soubor" +msgid "Select 3d editor Tab" +msgstr "Zobrazení 3D editoru" msgid "Select a gcode file:" msgstr "Vyberte soubor gcode:" +msgid "" +"Select a goal, this will change settings to increase the effects to search." +msgstr "Vyberte cíl, tím se změní nastavení, aby se zvýšil efekt vyhledávání." + msgid "Select all objects" msgstr "Vybrat všechny objekty" msgid "Select all points" msgstr "Vybrat všechny body" +msgid "Select all standard printers in this page" +msgstr "Vyberte všechny standardní tiskárny na této stránce" + msgid "Select an action to apply to the file" msgstr "Vyberte jak chcete na soubor otevřít" @@ -6568,11 +8923,17 @@ msgstr "Zvolte konfiguraci k načtení:" msgid "Select coordinate space, in which the transformation will be performed." msgstr "Vyberte souřadnicový prostor, ve kterém bude provedena transformace." +msgid "Select extruder number:" +msgstr "Vyberte číslo extruderu:" + msgid "Select Filament Settings Tab" msgstr "Zobrazit panel Nastavení filamentu" -msgid "Select presets to compare" -msgstr "Zvolte přednastavení k porovnání" +msgid "Select Gcode preview Tab" +msgstr "G-Code Prohlížeč" + +msgid "Select Layer Preview Tab" +msgstr "Zobrazit panel Nastavení filamentu" msgid "Select Print Settings Tab" msgstr "Zobrazit panel Nastavení tisku" @@ -6580,11 +8941,32 @@ msgstr "Zobrazit panel Nastavení tisku" msgid "Select Printer Settings Tab" msgstr "Zobrazit panel Nastavení tiskárny" +msgid "Select showing settings" +msgstr "Zvolte nastavení zobrazení" + msgid "Select the language" msgstr "Výběr jazyka" -msgid "Select the new file" -msgstr "Vyberte nový soubor" +msgid "Select the number milimeters for the tower." +msgstr "Vyberte číslo extruderu." + +msgid "Select the number of tests" +msgstr "Vyberte číslo extruderu" + +msgid "" +"Select the number of tests with higher temperature than the current one." +msgstr "Vyberte počet testů s vyšší teplotou než je aktuální." + +msgid "Select the number of tests with lower temperature than the current one." +msgstr "Vyberte počet testů s nižší teplotou než je aktuální." + +msgid "" +"Select the number tower to print, and by how many degrees C to decrease each " +"time." +msgstr "Vyberte počet testů s nižší teplotou než je aktuální." + +msgid "Select the output format for this printer." +msgstr "Výstupní formát." msgid "Select the print profiles this profile is compatible with." msgstr "Vyberte tiskové profily, s nimiž je tento profil kompatibilní." @@ -6592,15 +8974,48 @@ msgstr "Vyberte tiskové profily, s nimiž je tento profil kompatibilní." msgid "Select the printers this profile is compatible with." msgstr "Vyberte tiskárny, s nimiž je tento profil kompatibilní." +msgid "" +"Select the step in % between two tests.\n" +"Note that only multiple of 5 are engraved on the parts." +msgstr "" +"Vyberte krok v % mezi dvěma testy.\n" +"Všimněte si, že na součástech je vyryto pouze násobek 5." + +msgid "" +"Select the step in celcius between two tests.\n" +"Note that only multiple of 5 are engraved on the part." +msgstr "" +"Vyberte krok ve stupních Celsia mezi dvěma testy.\n" +"Všimněte si, že na součásti jsou vyryty pouze násobky 5." + msgid "Select the STL file to repair:" msgstr "Vyberte STL soubor k opravě:" +msgid "" +"Select this option to enforce z-lift on the first layer.\n" +"Useful to still use the lift on the first layer even if the 'Only lift Z " +"below' (retract_lift_above) is higher than 0." +msgstr "" +"Vyberte tuto možnost, chcete-li vynutit z-lift na první vrstvě.\n" +"Je užitečné stále používat zdvih na první vrstvě, i když je Pouze zdvih Z pod " +"(retract_lift_above) vyšší než 0." + +msgid "Select this option to not use/enforce the z-lift on a top surface." +msgstr "" +"Vyberte tuto možnost, pokud nechcete používat/vynucovat z-lift na horním povrchu." + msgid "Select toolbar icon size in respect to the default one." msgstr "Vyberte velikost ikon na panelu nástrojů vzhledem k výchozí velikosti." msgid "Select type of part" msgstr "Vyberte typ součásti" +msgid "Select what kind of pad do you need" +msgstr "Vyberte, jaký typ podložky potřebujete" + +msgid "Select what kind of support do you need" +msgstr "Vyberte typ podpěr, které potřebujete" + msgid "" "Select YES if you want to delete all saved tool changes, \n" "NO if you want all tool changes switch to color changes, \n" @@ -6611,40 +9026,40 @@ msgstr "" "nebo ZRUŠIT pro ponechání beze změny." msgid "Selection-Add" -msgstr "Výběr - Přidání" +msgstr "Výběr-Přidání" msgid "Selection-Add All" -msgstr "Výběr - Označení všeho" +msgstr "Výběr-Označení všeho" msgid "Selection-Add from list" -msgstr "Výběr - Přidání v seznamu" +msgstr "Výběr-Přidání v seznamu" msgid "Selection-Add from rectangle" -msgstr "Výběr - Přidání obdélníkovým výběrem" +msgstr "Výběr-Přidání obdélníkovým výběrem" msgid "Selection-Add Instance" -msgstr "Výběr - Přidání Instance" +msgstr "Výběr-Přidání Instance" msgid "Selection-Add Object" -msgstr "Výběr - Přidání Objektu" +msgstr "Výběr-Přidání Objektu" msgid "Selection-Remove" -msgstr "Výběr - Odebrání" +msgstr "Výběr-Odebrání" msgid "Selection-Remove All" -msgstr "Výběr - Zrušení" +msgstr "Výběr-Zrušení" msgid "Selection-Remove from list" -msgstr "Výběr - Odebrání v seznamu" +msgstr "Výběr-Odebrání v seznamu" msgid "Selection-Remove from rectangle" -msgstr "Výběr - Odebrání obdélníkovým výběrem" +msgstr "Výběr-Odebrání obdélníkovým výběrem" msgid "Selection-Remove Instance" -msgstr "Výběr - Odebrání Instance" +msgstr "Výběr-Odebrání Instance" msgid "Selection-Remove Object" -msgstr "Výběr - Odebrání Objektu" +msgstr "Výběr-Odebrání Objektu" msgid "Selects all objects" msgstr "Vybrat všechny objekty" @@ -6679,17 +9094,17 @@ msgstr "Název služby" msgid "Set" msgstr "Nastavit" -msgid "Set auto color changes" -msgstr "Nastavení automatických změn barev" +msgid "Set as a Separated Object" +msgstr "Změnit na samostatný objekt" -msgid "Set default extruder for the selected items" -msgstr "Nastavení výchozího extruderu pro vybrané položky" +msgid "Set as a Separated Objects" +msgstr "Převést na oddělené objekty" msgid "Set extruder change for every" msgstr "Nastavit změnu extruderu po každých" -msgid "Set extruder number for the selected items" -msgstr "Nastavení čísla extruderu pro vybrané položky" +msgid "Set extruder for selected items" +msgstr "Zvolte extruder pro vybrané položky" msgid "Set extruder sequence" msgstr "Nastavte pořadí extruderu" @@ -6706,9 +9121,15 @@ msgstr "Nastavit levý ukazatel jako aktivní" msgid "Set lower thumb as active" msgstr "Nastavit spodní ukazatel jako aktivní" +msgid "Set lower thumb to current slider thumb" +msgstr "Aktivovat spodní ukazatel aktivního posuvníku" + msgid "Set Mirror" msgstr "Zrcadlení" +msgid "Set number of instances" +msgstr "Zadat počet instancí" + msgid "Set numbers of copies to %d" msgstr "Nastavení počtu kopií na %d" @@ -6721,9 +9142,6 @@ msgstr "Nastavení pozice" msgid "Set Printable" msgstr "Zvolen příznak Tisknout objekt" -msgid "Set Printable group" -msgstr "Nastavení tisknutelné skupiny modelů" - msgid "Set Printable Instance" msgstr "Zvolen příznak Tisknout Instanci" @@ -6736,30 +9154,171 @@ msgstr "Nastavení režimu pravítka" msgid "Set Scale" msgstr "Nastavení měřítka" -msgid "Set selected items as Printable/Unprintable" -msgstr "Nastavení vybraných položek jako tisknuté/netisknuté" - -msgid "Set settings tabs as menu items (experimental)" -msgstr "Karty s nastavením zobrazovat jako položky v menu (experimentální)" - msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" -"Nastavte skutečnou orientaci LCD displeje uvnitř SLA tiskárny. Režim " -"Orientace na výšku převrátí význam parametrů šířky a výšky a výstupní obrazy " -"budou otočeny o 90 stupňů." +"Nastavte skutečnou orientaci LCD displeje uvnitř SLA tiskárny. Režim Orientace na " +"výšku převrátí význam parametrů šířky a výšky a výstupní obrazy budou otočeny o 90 " +"stupňů." + +msgid "" +"Set the new lift-z value for this override. 0 will disable the z-lift. -& to " +"disable. May only work on Height range modifiers." +msgstr "" +"Nastavte novou hodnotu lift-z pro toto přepsání. 0 deaktivuje z-lift. -& pro " +"deaktivaci. Může fungovat pouze s modifikátory rozsahu výšky." msgid "Set the shape of your printer's bed." msgstr "Nastavte tvar a rozměry vaší tiskové podložky." +msgid "" +"Set this if your printer uses control values from 0-100 instead of 0-255." +msgstr "Nastavte, pokud vaše tiskárna používá kontrolní hodnoty od 0-100 místo 0-255." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for external " +"perimeters. If left zero, default extrusion width will be used if set, " +"otherwise 1.05 x nozzle diameter will be used. If expressed as percentage " +"(for example 112.5%), it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Nastavte toto na nenulovou hodnotu pro nastavení ruční šířky vysunutí pro vnější " +"Perimetery. Pokud ponecháte nulu, použije se výchozí šířka vysunutí, pokud je " +"nastavena, jinak se použije 1,05 x průměr trysky. Pokud je vyjádřeno v procentech " +"(například 112,5 % ), bude vypočítána přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' Perimeteru a výchozí výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for first " +"layer. You can use this to force fatter extrudates for better adhesion. If " +"expressed as percentage (for example 140%) it will be computed over the " +"nozzle diameter of the nozzle used for the type of extrusion. If set to " +"zero, it will use the default extrusion width.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu, chcete-li nastavit šířku ručního " +"vytlačování pro první vrstvu. Toto můžete použít k vynucení tučnějších extrudátů " +"pro lepší přilnavost. Pokud je vyjádřeno v procentech (například 140%), bude " +"vypočítáno přes průměr trysky tryska použitá pro typ vytlačování. Pokud je " +"nastavena na nulu, použije výchozí šířku vysunutí.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' Perimeteru a výchozí výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"solid surfaces. If left as zero, default extrusion width will be used if " +"set, otherwise 1.125 x nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Nastavte toto na nenulovou hodnotu, chcete-li nastavit ruční šířku vysunutí pro " +"výplň pro pevné povrchy. Pokud ponecháte hodnotu nula, použije se výchozí šířka " +"vysunutí, pokud je nastavena, jinak se použije 1,125 x průměr trysky. Pokud je " +"vyjádřeno v procentech (např. příklad 110 %) bude vypočítán přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill for " +"top surfaces. You may want to use thinner extrudates to fill all narrow " +"regions and get a smoother finish. If left as zero, default extrusion width " +"will be used if set, otherwise nozzle diameter will be used. If expressed as " +"percentage (for example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu, chcete-li nastavit šířku ručního " +"vysunutí pro výplň pro horní povrchy. Možná budete chtít použít tenčí vytlačení k " +"vyplnění všech úzkých oblastí a získat hladší povrch. Pokud ponecháte hodnotu nula, " +"použije se výchozí šířka vysunutí pokud je nastaveno, jinak se použije průměr " +"trysky. Pokud je vyjádřen v procentech (například 110 %), bude počítán přes průměr " +"trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for infill. If " +"left as zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. You may want to use fatter extrudates to speed " +"up the infill and make your parts stronger. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using default layer height." +msgstr "" +"Nastavte toto na nenulovou hodnotu pro nastavení ruční šířky vytlačování pro výplň. " +"Pokud ponecháte nulu, použije se výchozí šířka vysunutí, pokud je nastavena, jinak " +"se použije 1,125 x průměr trysky. Možná budete chtít použít tučnější vytlačování k " +"urychlení vyplňte výplň a zpevněte díly. Pokud je vyjádřeno v procentech (například " +"110 %), bude to vypočítáno podle průměru trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí výchozí " +"výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for perimeters. " +"You may want to use thinner extrudates to get more accurate surfaces. If " +"left zero, default extrusion width will be used if set, otherwise 1.125 x " +"nozzle diameter will be used. If expressed as percentage (for example 105%) " +"it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu pro nastavení šířky ručního vysunutí pro " +"Perimetery. Možná budete chtít použít tenčí vytlačování, abyste získali přesnější " +"povrchy. Pokud ponecháte nulu, použije se výchozí šířka vysunutí, pokud je " +"nastavena, jinak bude 1,125 x průměr trysky Pokud je vyjádřeno v procentech " +"(například 105 %), bude vypočítáno přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' Perimeteru a výchozí výšky vrstvy." + +msgid "" +"Set this to a non-zero value to set a manual extrusion width for support " +"material. If left as zero, default extrusion width will be used if set, " +"otherwise nozzle diameter will be used. If expressed as percentage (for " +"example 110%) it will be computed over nozzle diameter." +msgstr "" +"Nastavte tuto hodnotu na nenulovou hodnotu, chcete-li nastavit šířku ručního " +"vysunutí pro nosný materiál. Pokud ponecháte hodnotu nula, použije se výchozí šířka " +"vysunutí, pokud je nastavena, jinak se použije průměr trysky. Pokud je vyjádřen v " +"procentech (například 110 %) bude vypočítána přes průměr trysky." + +msgid "" +"Set this to the clearance radius around your extruder. If the extruder is " +"not centered, choose the largest value for safety. This setting is used to " +"check for collisions and to display the graphical preview in the platter.\n" +"Set zero to disable clearance checking." +msgstr "" +"Nastavte poloměr vůle kolem vašeho extruderu. Pokud extruder není vycentrován, " +"zvolte pro bezpečnost největší hodnotu. Toto nastavení se používá ke kontrole " +"kolizí a k zobrazení grafického náhledu na talíři.\n" +"Nastavte nulu pro deaktivaci kontroly vůlí." + +msgid "" +"Set this to the height moved when your Z motor (or equivalent) turns one " +"step.If your motor needs 200 steps to move your head/platter by 1mm, this " +"field should be 1/200 = 0.005.\n" +"Note that the gcode will write the z values with 6 digits after the dot if " +"z_step is set (it's 3 digits if it's disabled).\n" +"Set zero to disable." +msgstr "" +"Nastavte toto na výšku posunutou, když se motor Z (nebo ekvivalent) otočí o jeden " +"krok. Pokud váš motor potřebuje 200 kroků, aby posunul hlavu/talíř o 1 mm, toto " +"pole by mělo být 1/200 = 0,005.\n" +"Všimněte si, že gcode zapíše hodnoty z s 6 číslicemi za tečkou, pokud je nastaven " +"z_step (jsou to 3 číslice, pokud je zakázán).\n" +"Nastavit nulu pro zakázání." + msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "" -"Nastavte tuto hodnotu na maximální výšku, která může být dosažena extruderem " -"během tisku." +"Nastavte tuto hodnotu na maximální výšku, která může být dosažena extruderem během " +"tisku." msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " @@ -6767,41 +9326,54 @@ msgid "" "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" -"Zadejte vertikální vzdálenost mezi tryskou a (obvykle) tyčemi osy X. Jinými " -"slovy, je to výška kolizního prostoru okolo extruderu a představuje " -"maximální hloubku, které může extruder dosáhnout před kolizí s jinými, již " -"vytištěnými, objekty." +"Zadejte vertikální vzdálenost mezi tryskou a (obvykle) tyčemi osy X. Jinými slovy, " +"je to výška kolizního prostoru okolo extruderu a představuje maximální hloubku, " +"které může extruder dosáhnout před kolizí s jinými, již vytištěnými, objekty." msgid "Set Unprintable" msgstr "Odebrán příznak Tisknout objekt" -msgid "Set Unprintable group" -msgstr "Nastavení netisknutelné skupiny modelů" - msgid "Set Unprintable Instance" msgstr "Odebrán příznak Tisknout Instanci" msgid "Set upper thumb as active" msgstr "Nastavit horní ukazatel jako aktivní" +msgid "Set upper thumb to current slider thumb" +msgstr "Aktivovat horní ukazatel aktivního posuvníku" + msgid "" "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:" "trace\n" "For example. loglevel=2 logs fatal, error and warning level messages." msgstr "" -"Zvolte úroveň logování: 0:fatalní chyby, 1:chyby, 2:varování, 3:info, 4:" -"ladění, 5:trasování\n" +"Zvolte úroveň logování: 0:fatální chyby, 1:chyby, 2:varování, 3:info, 4:ladění, 5:" +"trasování\n" "Například. loglevel=2 zaznamenává fatální chyby, chyby a varovné zprávy." msgid "Settings" msgstr "Nastavení" +msgid "" +"Settings button: all windows are in the application, no tabs: you have to " +"clic on settings gears to switch to settings tabs." +msgstr "" +"Tlačítko Nastavení: všechna okna jsou v aplikaci, žádné karty: pro přepnutí na " +"karty nastavení musíte kliknout na ozubená kola nastavení." + msgid "Settings for height range" msgstr "Nastavení pro výškový rozsah" msgid "Settings in non-modal window" msgstr "Nastavení v nemodálním okně" +msgid "" +"Settings window: settings are displayed in their own window. You have to " +"clic on settings gears to show the settings window." +msgstr "" +"Okno nastavení: nastavení se zobrazí ve vlastním okně. Chcete-li zobrazit okno " +"nastavení, musíte kliknout na ozubená kola nastavení." + msgid "Shall I adjust those settings for supports?" msgstr "Mám upravit tato nastavení pro podpěry?" @@ -6811,6 +9383,9 @@ msgstr "Mám tato nastavení upravit tak, aby bylo možné povolit režim Váza? msgid "Shall I adjust those settings in order to enable the Wipe Tower?" msgstr "Mám tato nastavení upravit tak, aby bylo možné povolit Čistící Věž?" +msgid "Shall I switch the brim offset to 0?" +msgstr "Mám přepnout offset límce na 0?" + msgid "Shall I switch to rectilinear fill pattern?" msgstr "Mám přepnout na přímočarý vzor výplně?" @@ -6820,9 +9395,6 @@ msgstr "Mám synchronizovat vrstvy podpěr, aby bylo možné zapnout Čistící msgid "Shape" msgstr "Tvar" -msgid "Shape Gallery" -msgstr "Galerie Tvarů" - msgid "Shells" msgstr "Skořepiny" @@ -6835,8 +9407,11 @@ msgstr "Shift + Levé tlačítko myši:" msgid "Shift + Right mouse button:" msgstr "Shift + Pravé tlačítko myši:" -msgid "Shift objects to bed" -msgstr "Posunout objekty na podložku" +msgid "Short layer time - began to increase base fan speed" +msgstr "Krátká doba vrstvy - začala se zvyšovat základní rychlost ventilátoru" + +msgid "Should we open this hyperlink in your default browser?" +msgstr "Máme otevřít tento hypertextový odkaz ve vašem výchozím prohlížeči?" msgid "Show" msgstr "Zobrazit" @@ -6844,11 +9419,11 @@ msgstr "Zobrazit" msgid "Show &Configuration Folder" msgstr "Otevřít adresář s &konfiguracemi" -msgid "Show &Labels" -msgstr "Zobrazit &Popisky" +msgid "Show &labels" +msgstr "Zobrazit &popisky" -msgid "Show \"Tip of the day\" notification after start" -msgstr "Zobrazovat \"Tip dne\" po spuštění" +msgid "Show a random splash screen image from the list at each startup" +msgstr "Zobrazit náhodný obrázek úvodní obrazovky ze seznamu při každém spuštění" msgid "Show about dialog" msgstr "Zobrazit okno o Slic3ru" @@ -6856,9 +9431,6 @@ msgstr "Zobrazit okno o Slic3ru" msgid "Show advanced settings" msgstr "Zobrazit rozšířená nastavení" -msgid "Show all presets (including incompatible)" -msgstr "Zobrazit všechna přednastavení (včetně nekompatibilních)" - msgid "Show drop project dialog" msgstr "Zobrazit dialogové okno při přetažení projektu" @@ -6889,6 +9461,9 @@ msgstr "Zobrazit výšku objektu na pravítku" msgid "Show object/instance labels in 3D scene" msgstr "Zobrazit popisky objektů / instancí ve 3D scéně" +msgid "Show overwrite dialog." +msgstr "Zobrazit dialogové okno přepisu." + msgid "Show sidebar collapse/expand button" msgstr "Zobrazit tlačítko sbalit/rozbalit postranní panel" @@ -6907,6 +9482,12 @@ msgstr "Zobrazit podpěry" msgid "Show system information" msgstr "Zobrazit systémové informace" +msgid "Show the bed texture on the thumbnail picture." +msgstr "Ukázat texturu postele na miniaturním obrázku." + +msgid "Show the editor of the input models" +msgstr "Zobrazit editor vstupních modelů" + msgid "Show the filament settings" msgstr "Zobrazit nastavení filamentu" @@ -6916,21 +9497,27 @@ msgstr "Zobrazit kompletní seznam možností konfigurace tisku / G-codu." msgid "Show the full list of SLA print configuration options." msgstr "Zobrazit kompletní seznam možností konfigurace SLA tisku." +msgid "Show the layers from the slicing process" +msgstr "Zobrazit vrstvy z procesu slicování" + msgid "Show the list of the keyboard shortcuts" msgstr "Zobrazit seznam klávesových zkratek" +msgid "Show the preview of the gcode output" +msgstr "Zobrazit náhled výstupu gcode" + msgid "Show the print settings" msgstr "Zobrazit nastavení tisku" msgid "Show the printer settings" msgstr "Zobrazit nastavení tiskárny" +msgid "Show the supports (and pads) on the thumbnail picture." +msgstr "Zobrazit podpěry (a podložky) na obrázku miniatury." + msgid "Show this help." msgstr "Zobrazí tuto nápovědu." -msgid "Show Tip of the Day" -msgstr "Ukázat Tip Dne" - msgid "Show user configuration folder (datadir)" msgstr "Zobrazit uživatelský adresář konfigurace (datadir)" @@ -6938,11 +9525,10 @@ msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "Zobrazit / skrýt dialogové okno nastavení zařízení 3Dconnexion" msgid "Show/Hide 3Dconnexion devices settings dialog, if enabled" -msgstr "" -"Zobrazit/skrýt okno s nastavením 3Dconnexion zařízení, pokud je zaškrtnuto" +msgstr "Zobrazit/skrýt okno s nastavením 3Dconnexion zařízení, pokud je zaškrtnuto" -msgid "Show/Hide G-code window" -msgstr "Zobrazit/skrýt okno s G-code" +msgid "Show/Hide Legend & Estimated printing time" +msgstr "Zobrazit/skrýt legendu a odhadované tiskové časy" msgid "Show/Hide Legend and Estimated printing time" msgstr "Zobrazit/skrýt legendu a odhadované tiskové časy" @@ -6950,14 +9536,23 @@ msgstr "Zobrazit/skrýt legendu a odhadované tiskové časy" msgid "Show/Hide object/instance labels" msgstr "Zobrazit/skrýt popisky objektů/instancí" +msgid "Shrinkage" +msgstr "Smrštění" + +msgid "Simple" +msgstr "Jednoduchý" + msgid "Simple mode" msgstr "Jednoduchý režim" +msgid "Simple View Mode" +msgstr "Jednoduchý režim" + msgid "Single extruder MM setup" msgstr "Nastavení jednoho extruderu MM" msgid "Single Extruder Multi Material" -msgstr "MultiMaterial tisk s jedním extrudérem" +msgstr "Tisk s jedním extruderem Multi-Material" msgid "" "Single Extruder Multi Material is selected, \n" @@ -6967,8 +9562,7 @@ msgid "" msgstr "" "Je zvolená Multi Materiálová tiskárna s jedním extruderem,\n" "a proto všechny extrudery musí mít stejný průměr.\n" -"Chcete nastavit průměry všech extruderových trysek podle průměru prvního " -"extruderu?" +"Chcete nastavit průměry všech extruderových trysek podle průměru prvního extruderu?" msgid "Single extruder multimaterial parameters" msgstr "Parametry jednoho multi materiálového extruderu" @@ -6976,36 +9570,60 @@ msgstr "Parametry jednoho multi materiálového extruderu" msgid "Single instance mode" msgstr "Režim jedné instance" -msgid "Sinking" -msgstr "Potopení" - msgid "Size" -msgstr "OfFile||Velikost" +msgstr "Rozměr" msgid "Size and coordinates" msgstr "Rozměry a počátek" +msgid "Size for Gcode" +msgstr "Velikost pro G-code" + msgid "Size in X and Y of the rectangular plate." msgstr "Rozměr obdélníkové tiskové podložky v ose X a Y." +msgid "Size of the tab icons, in pixels. Set to 0 to remove icons." +msgstr "Velikost ikon karet v pixelech. Nastavením na 0 ikony odstraníte." + +msgid "" +"Skinnydip performs a secondary dip into the meltzone to burn off fine " +"strings of filament" +msgstr "" +"Skinnydip provádí sekundární ponoření do zóny tání, aby spálilo jemné vlákna vlákna" + msgid "Skirt" msgstr "Obrys" -msgid "Skirt and brim" +msgid "skirt" +msgstr "Obrys" + +msgid "Skirt & Brim" msgstr "Obrys a límec" +msgid "Skirt brim" +msgstr "Obrys límce" + +msgid "Skirt distance from brim" +msgstr "Vzdálenost Obrysu od límce" + msgid "Skirt height" msgstr "Výška obrysu" msgid "Skirt Loops" msgstr "Počet obrysových smyček" -msgid "Skirt/Brim" -msgstr "Obrys/Límec" +msgid "Skirt width" +msgstr "Šířka obrysu" msgid "SLA gizmo keyboard shortcuts" msgstr "Klávesové zkratky pro SLA gizma" +msgid "SLA gizmo turned off" +msgstr "Ukončení režimu SLA gizmo" + +msgid "SLA gizmo turned on" +msgstr "Vstup do režimu SLA gizmo" + msgid "SLA material" msgstr "SLA materiál" @@ -7015,9 +9633,6 @@ msgstr "Výběr SLA materiálových profilů" msgid "SLA material type" msgstr "Typ SLA materiálu" -msgid "SLA materials" -msgstr "SLA materiály" - msgid "SLA Materials" msgstr "SLA Materiály" @@ -7036,19 +9651,32 @@ msgstr "SLA Podpěrné Body" msgid "SLA supports outside the print area were detected." msgstr "Byly zjištěny SLA podpěry mimo tiskovou oblast." +msgid "SLA Technology Printers" +msgstr "Tiskárny technologie SLA" + +msgid "Slab" +msgstr "Deska" + msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "" -"Slic3r může nahrát soubory G-code do tiskového serveru. Toto pole musí " -"obsahovat druh tiskového serveru." +"Slic3r může nahrát soubory G-code do tiskového serveru. Toto pole musí obsahovat " +"druh tiskového serveru." msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" -"Slic3r může nahrát soubory do tiskového serveru. Toto pole by mělo obsahovat " -"klíč API požadovaný pro ověření." +"Slic3r může nahrát soubory do tiskového serveru. Toto pole by mělo obsahovat klíč " +"API požadovaný pro ověření." + +msgid "" +"Slic3r can upload G-code files to a printer host. This field should contain " +"the hostname, IP address or URL of the printer host instance." +msgstr "" +"Slic3r může nahrát soubory G-code na hostitele tiskárny. Toto pole by mělo " +"obsahovat název hostitele, IP adresu nebo URL instance hostitele tiskárny." msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " @@ -7057,11 +9685,50 @@ msgid "" "name and password into the URL in the following format: https://username:" "password@your-octopi-address/" msgstr "" -"Slic3r může nahrávat G-cody do tiskového serveru. Toto pole by mělo " -"obsahovat název hostitele, IP adresu nebo URL tiskového serveru. K " -"tiskovému serveru za HAProxy se zapnutým ověřením basic auth lze přistupovat " -"zadáním uživatelského jména a hesla do adresy URL v následujícím formátu: " -"https://username: password@your-octopi-address/" +"Slic3r může nahrávat G-cody do tiskového serveru. Toto pole by mělo obsahovat název " +"hostitele, IP adresu nebo URL tiskového serveru. K tiskovému serveru za HAProxy " +"se zapnutým ověřením basic auth lze přistupovat zadáním uživatelského jména a hesla " +"do adresy URL v následujícím formátu: https://username: password@your-octopi-" +"address/" + +msgid "Slic3r logo designed by Corey Daniels." +msgstr "Logo Slic3r navrhl Corey Daniels." + +msgid "Slic3r Manual" +msgstr "Manuál Slic3r" + +msgid "Slic3r will never scale the speed below this one." +msgstr "Slic3r nikdy nezvýší rychlost pod tuto." + +msgid "" +"Slic3r(yellow): ada230, PrusaSlicer(orange): c46737, SuperSlicer(blue): " +"0047c7" +msgstr "" +"Slic3r (žlutý): ada230, PrusaSlicer (oranžový): c46737, SuperSlicer (modrý): 0047c7" + +msgid "" +"Slic3r(yellow): cabe39, PrusaSlicer(orange): ed6b21, SuperSlicer(blue): " +"2172eb" +msgstr "" +"Slic3r (žlutá): cabe39, PrusaSlicer (oranžová): ed6b21, SuperSlicer (modrá): 2172eb" + +msgid "" +"Slic3r(yellow): eddc21, PrusaSlicer(orange): fd7e42, SuperSlicer(blue): " +"428dfd" +msgstr "" +"Slic3r (žlutá): eddc21, PrusaSlicer (oranžová): fd7e42, SuperSlicer (modrá): 428dfd" + +msgid "" +"Slic3r(yellow): fef48b, PrusaSlicer(orange): ff7d38, SuperSlicer(blue): " +"428cff" +msgstr "" +"Slic3r (žlutá): fef48b, PrusaSlicer (oranžová): ff7d38, SuperSlicer (modrá): 428cff" + +msgid "" +"Slic3r(yellow): ffee38, PrusaSlicer(orange): feac8b, SuperSlicer(blue): " +"8bb9fe" +msgstr "" +"Slic3r (žlutá): ffee38, PrusaSlicer (oranžová): feac8b, SuperSlicer (modrá): 8bb9fe" msgid "Slice" msgstr "Slicovat" @@ -7078,9 +9745,6 @@ msgstr "Poloměr uzavření mezery v tiskové vrstvě" msgid "Slice now" msgstr "Slicovat" -msgid "Slice resolution" -msgstr "Rozlišení slicování" - msgid "Slice the model and export SLA printing layers as PNG." msgstr "Naslicuje model a exportuje SLA tiskové vrstvy jako PNG soubory." @@ -7097,8 +9761,8 @@ msgstr "" msgid "Sliced Info" msgstr "Informace o slicování" -msgid "Sliced object \"%1%\" looks like a logo or a sign" -msgstr "Slicovaný objekt \"%1%\" vypadá jako logo nebo nápis" +msgid "Sliced preview" +msgstr "Náhled na Slicování" msgid "Slicing" msgstr "Slicování" @@ -7118,11 +9782,7 @@ msgstr "Slicování dokončeno." msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "" -"Slicování muselo být zastaveno kvůli vnitřní chybě: Nekonzistentní index " -"řezů." - -msgid "Slicing Mode" -msgstr "Režim slicování" +"Slicování muselo být zastaveno kvůli vnitřní chybě: Nekonzistentní index řezů." msgid "Slicing model" msgstr "Slicuji model" @@ -7139,14 +9799,17 @@ msgstr "Zpomalit tisk pokud je doba tisku kratší než" msgid "Slow tilt" msgstr "Pomalý náklon" -msgid "Small pillar diameter percent" -msgstr "Procentní průměr malých pilířů" +msgid "Small" +msgstr "Malý" -msgid "Smart fill" -msgstr "Chytré vybarvení" +msgid "Small perimeter speed" +msgstr "Rychlost malých perimetrů" -msgid "Smart fill angle" -msgstr "Úhel chytrého vybarvení" +msgid "Small perimeters speed" +msgstr "Rychlost na malých Perimetrech" + +msgid "Small pillar diameter percent" +msgstr "Procentní průměr malých pilířů" msgid "Smooth" msgstr "Vyhladit" @@ -7157,20 +9820,17 @@ msgstr "Vyhlazení" msgid "Snapshot name" msgstr "Název zálohy" -msgid "Snug" -msgstr "Přiléhavý" - msgid "Solid" -msgstr "Plný" +msgstr "Plná Výplň" -msgid "Solid " -msgstr "Plný " +msgid "Solid first layer" +msgstr "Plná první vrstva" msgid "Solid infill" msgstr "Plná výplň" msgid "solid infill" -msgstr "plná výplň" +msgstr "Plná výplň" msgid "Solid infill every" msgstr "Plná výplň každou" @@ -7178,12 +9838,27 @@ msgstr "Plná výplň každou" msgid "Solid infill extruder" msgstr "Extruder pro plnou výplň" +msgid "Solid infill spacing" +msgstr "Mezera pevné výplně" + +msgid "Solid infill speed" +msgstr "Rychlost plné výplně" + msgid "Solid infill threshold area" msgstr "Prahová oblast s plnou výplní" +msgid "Solid infill width" +msgstr "Šířka plné výplně" + msgid "Solid layers" msgstr "Plných vrstev" +msgid "Solid pattern" +msgstr "Plný vzor" + +msgid "Solid spacing" +msgstr "Pevné rozestupy" + msgid "Soluble material" msgstr "Rozpustný materiál" @@ -7193,100 +9868,195 @@ msgstr "Rozpustný materiál je převážně používán pro tisk rozpustných p msgid "" "Some fields are too long to fit. Right mouse click reveals the full text." msgstr "" -"Některá pole jsou příliš dlouhá a nevejdou se. Kliknutím pravým tlačítkem " -"myši zobrazíte celý text." +"Některá pole jsou příliš dlouhá a nevejdou se. Kliknutím pravým tlačítkem myši " +"zobrazíte celý text." -msgid "Some filaments were uninstalled." -msgstr "Některé filamenty byly odinstalovány." +msgid "" +"Some G/M-code commands, including temperature control and others, are not " +"universal. Set this option to your printer's firmware to get a compatible " +"output. The \"No extrusion\" flavor prevents Slic3r from exporting any " +"extrusion value at all." +msgstr "" +"Některé příkazy G/M-kódu, včetně ovládání teploty a dalších, nejsou univerzální. " +"Nastavte tuto možnost na firmware vaší tiskárny, abyste získali kompatibilní " +"výstup. Příchuť \"No extrusion\" zabraňuje Slic3r exportovat jakoukoli hodnotu " +"extruze." -msgid "Some objects are not visible during editing." -msgstr "Některé objekty nejsou během úprav viditelné." +msgid "Some objects are not visible." +msgstr "Některé objekty nejsou viditelné." msgid "Some objects are too close; your extruder will collide with them." msgstr "Některé objekty jsou příliš blízko; Extruder do nich narazí." msgid "" "Some objects are too tall and cannot be printed without extruder collisions." -msgstr "" -"Některé objekty jsou příliš vysoké a nelze je tisknout bez kolizí extruderu." +msgstr "Některé objekty jsou příliš vysoké a nelze je tisknout bez kolizí extruderu." msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" -"Některé objekty mohou být na několika menších podložkách namísto jedné " -"velké. Tento parametr definuje, jak daleko může být střed dvou menších " -"podložek. Pokud budou blíže, budou sloučeny do jedné podložky." - -msgid "" -"Some presets are modified and the unsaved changes will not be captured by " -"the configuration snapshot." -msgstr "" -"Některá přednastavení jsou upravená a neuložené změny nebudou zachyceny v " -"záloze konfigurace." - -msgid "" -"Some presets are modified and the unsaved changes will not be exported into " -"configuration bundle." -msgstr "" -"Některá přednastavení jsou upravená a neuložené změny nebudou exportovány do " -"zálohy konfigurace." +"Některé objekty mohou být na několika menších podložkách namísto jedné velké. Tento " +"parametr definuje, jak daleko může být střed dvou menších podložek. Pokud budou " +"blíže, budou sloučeny do jedné podložky." msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" -"Některé tiskárny nebo nastavení tiskárny mohou mít potíže s tiskem s " -"proměnnou výškou vrstvy. Ve výchozím nastavení je zapnuto." +"Některé tiskárny nebo nastavení tiskárny mohou mít potíže s tiskem s proměnnou " +"výškou vrstvy. Ve výchozím nastavení je zapnuto." -msgid "Some Printers were uninstalled." -msgstr "Některé tiskárny byly odinstalovány." +msgid "Spacing" +msgstr "Vzdálenost" -msgid "Some SLA materials were uninstalled." -msgstr "Některé SLA materiály byly odinstalovány." - -msgid "Spacing" +msgid "spacing" msgstr "Vzdálenost" msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "" -"Rozteč linií kontaktních vrstev. Nastavte nulu pro získání plných " -"kontaktních vrstev." +"Rozteč linií kontaktních vrstev. Nastavte 0 pro získání plných kontaktních " +"vrstev." + +msgid "Spacing between ironing lines" +msgstr "Rozteč mezi ironing linkami" msgid "Spacing between support material lines." msgstr "Rozteč linií podpěr." +msgid "Sparse" +msgstr "Výplň" + +msgid "Sparse infill speed" +msgstr "Spojení řídkých výplňových čar" + msgid "Speed" msgstr "Rychlost" msgid "Speed (mm/s)" msgstr "Rychlost (mm/s)" +msgid "" +"Speed for filling small gaps using short zigzag moves. Keep this reasonably " +"low to avoid too much shaking and resonance issues.\n" +"Gap fill extrusions are ignored from the automatic volumetric speed " +"computation, unless you set it to 0." +msgstr "" +"Rychlost pro vyplnění malých mezer pomocí krátkých klikatých pohybů. Udržujte ji " +"přiměřeně nízkou, abyste se vyhnuli příliš velkým problémům s chvěním a rezonancí." +"\"\n" +"Vysunutí výplně mezery se při automatickém výpočtu objemové rychlosti ignoruje, " +"pokud ji nenastavíte na 0." + +msgid "Speed for milling tool." +msgstr "Rychlost pro frézovací nástroj." + msgid "" "Speed for movements along the Z axis.\n" -"When set to zero, the value is ignored and regular travel speed is used " +"When set to zero, this value is ignored and regular travel speed is used " "instead." msgstr "" "Rychlost pro pohyby podél osy Z.\n" -"Pokud je nastavena na nulu, hodnota se ignoruje a místo ní se použije běžná " -"rychlost pohybu." +"Při nastavení na nulu se tato hodnota ignoruje a místo toho se použije běžná " +"rychlost." msgid "Speed for non-print moves" msgstr "Netiskové rychlosti" +msgid "" +"Speed for perimeters (contours, aka vertical shells). Set zero for auto." +msgstr "" +"Rychlost pro perimetry (obrysy, neboli svislé skořepiny). Nastavte nulu pro auto." + msgid "Speed for print moves" msgstr "Rychlosti pohybů tiskárny" +msgid "Speed for printing bridges." +msgstr "Rychlost pro vytváření mostů." + +msgid "" +"Speed for printing overhangs.\n" +"Can be a % of the bridge speed." +msgstr "" +"Rychlost pro tisk převisů.\n" +"Může to být % rychlosti mostů." + +msgid "" +"Speed for printing solid regions (top/bottom/internal horizontal shells). " +"This can be expressed as a percentage (for example: 80%) over the default " +"infill speed. Set zero for auto." +msgstr "" +"Rychlost pro tisk plných oblastí (horní/spodní/vnitřní horizontální skořepiny). Lze " +"ji vyjádřit jako procento (například: 80%) oproti výchozí rychlosti plnění. " +"Nastavte nulu pro auto." + +msgid "" +"Speed for printing support material interface layers. If expressed as " +"percentage (for example 50%) it will be calculated over support material " +"speed." +msgstr "" +"Rychlost tisku podpěrných kontaktních vrstev. Pokud je vyjádřen procentní podíl " +"(například 50%), vypočítá se podle rychlosti tisku podpěr." + +msgid "Speed for printing support material." +msgstr "Rychlost tisku podpěr." + +msgid "" +"Speed for printing the bridges that support the top layer.\n" +"Can be a % of the bridge speed." +msgstr "" +"Rychlost tisku mostů, které podporují horní vrstvu.\n" +"Může to být % z rychlosti mostu." + +msgid "Speed for printing the internal fill. Set zero for auto." +msgstr "Rychlost pro tisk vnitřní výplně. Nastavte nulu pro auto." + +msgid "" +"Speed for printing top solid layers (it only applies to the uppermost " +"external layers and not to their internal solid layers). You may want to " +"slow down this to get a nicer surface finish. This can be expressed as a " +"percentage (for example: 80%) over the solid infill speed above. Set zero " +"for auto." +msgstr "" +"Rychlost tisku horních plných vrstev (platí pouze pro nejsvrchnější vnější vrstvy, " +"nikoli pro jejich vnitřní plné vrstvy). Chcete-li získat hezčí povrchovou úpravu, " +"můžete ji zpomalit. Lze ji vyjádřit v procentech (například: 80%) nad rychlost " +"plného plnění výše. Nastavte nulu pro auto." + +msgid "" +"Speed for thin walls (external extrusions that are alone because the obect " +"is too thin at these places)." +msgstr "" +"Rychlost pro tenké stěny (externí výlisky, které jsou samostatné, protože objekt je " +"v těchto místech příliš tenký)." + msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "Rychlost posunů (přejezdy mezi body extruze)." +msgid "" +"Speed in mm/s of the wipe. If it's faster, it will try to go further away, " +"as the wipe time is set by ( 100% - 'retract before wipe') * 'retaction " +"length' / 'retraction speed'.\n" +"If set to zero, the travel speed is used." +msgstr "" +"Rychlost stírání v mm/s. Pokud je rychlejší, pokusí se jet dále, protože doba " +"stírání je nastavena pomocí ( 100 % - 'zatažení před setřením') * 'délka zpětné " +"vazby' / 'rychlost zatažení'. \n" +"Pokud je nastaveno na nulu, použije se rychlost pojezdu." + msgid "Speed of the first cooling move" msgstr "Rychlost prvního pohybu chlazení" msgid "Speed of the last cooling move" msgstr "Rychlost posledního pohybu chlazení" +msgid "Speed to extract from melt zone" +msgstr "Rychlost extrakce ze zóny tání" + +msgid "Speed to move into melt zone" +msgstr "Rychlost přesunu do zóny tání" + msgid "Speed used at the very beginning of loading phase. " msgstr "Rychlost použitá na samém počátku zaváděcí fáze. " @@ -7297,18 +10067,20 @@ msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming). " msgstr "" -"Rychlost vysouvání filamentu při výměně na čistící věži (úvodní část " -"vysunutí okamžitě po rapidní extruzi není ovlivněna). " +"Rychlost vysouvání filamentu při výměně na čistící věži (úvodní část vysunutí " +"okamžitě po rapidní extruzi není ovlivněna). " msgid "" "Speed used for unloading the tip of the filament immediately after ramming. " msgstr "" -"Rychlost použitá při vysouvání špičky filamentu bezprostředně po rapidní " -"extruzi. " +"Rychlost použitá při vysouvání špičky filamentu bezprostředně po rapidní extruzi. " msgid "Speed:" msgstr "Rychlost:" +msgid "Speedup time" +msgstr "Čas zrychlení" + msgid "Sphere" msgstr "Koule" @@ -7318,9 +10090,24 @@ msgstr "Spirálová Váza" msgid "Spiral vase" msgstr "Spirálová váza" +msgid "Splash screen" +msgstr "Úvodní obrazovka" + +msgid "Splash screen image" +msgstr "Obrázek úvodní obrazovky" + msgid "Split" msgstr "Rozdělit" +msgid "Split the selected object" +msgstr "Rozdělit vybraný objekt" + +msgid "Split the selected object into individual objects" +msgstr "Rozdělit vybraný objekt na jednotlivé objekty" + +msgid "Split the selected object into individual sub-parts" +msgstr "Rozdělit vybraný objekt na jednotlivé dílčí části" + msgid "Split to objects" msgstr "Rozdělit na objekty" @@ -7333,21 +10120,22 @@ msgstr "Rozdělit na části" msgid "Split to Parts" msgstr "Rozdělit na Části" -msgid "Split triangles" -msgstr "Rozdělovat trojúhelníky" - -msgid "Splits bigger facets into smaller ones while the object is painted." -msgstr "Během malování objektu rozdělí větší fasety na menší." - msgid "Spool weight" msgstr "Hmotnost cívky" -msgid "Stack overflow" -msgstr "Přetečení zásobníku" - msgid "Standard" msgstr "Běžné" +msgid "Standard Cube" +msgstr "Standardní kostka" + +msgid "" +"Standard cubic xyz cube, with a flat top. Better for infill/perimeter " +"overlap calibration." +msgstr "" +"Standardní krychle xyz krychle s plochým vrcholem. Lepší pro kalibraci výplně/" +"přesahu perimetru." + msgid "Stars" msgstr "Hvězdy" @@ -7363,8 +10151,14 @@ msgstr "Začátek G-code" msgid "Start new slicing process" msgstr "Zahájit nový slicovací proces" +msgid "Start printing after upload" +msgstr "Spustit tisk po nahrání" + +msgid "Start temp:" +msgstr "Počáteční teplota:" + msgid "Start the application" -msgstr "Spusťit aplikaci" +msgstr "Spustit aplikaci" msgid "" "Starting with %1% 2.3, configuration directory on Linux has changed " @@ -7383,17 +10177,17 @@ msgid "" "\n" "What do you want to do now?" msgstr "" -"Počínaje %1% 2.3 se konfigurační adresář v systému Linux změnil (podle " -"specifikace XDG Base Directory) na %2%.\n" +"Počínaje %1% 2.3 se konfigurační adresář v systému Linux změnil (podle specifikace " +"XDG Base Directory) na %2%.\n" "\n" "Tento adresář ještě neexistoval (možná používáte novou verzi poprvé).\n" "Byl však zjištěn starý konfigurační adresář %1% v\n" "%3%.\n" "\n" -"Zvažte přesunutí obsahu starého adresáře do nového umístění za účelem " -"přístupu k vašim profilům atd.\n" -"Pamatujte, že pokud se v budoucnu rozhodnete %1% downgradovat, použije znovu " -"staré umístění.\n" +"Zvažte přesunutí obsahu starého adresáře do nového umístění za účelem přístupu k " +"vašim profilům atd.\n" +"Pamatujte, že pokud se v budoucnu rozhodnete %1% downgradovat, použije znovu staré " +"umístění.\n" "\n" "Co chcete udělat?" @@ -7403,6 +10197,12 @@ msgstr "Stav" msgid "Status:" msgstr "Stav:" +msgid "" +"Stay in melt zone for this amount of time before extracting the filament. " +"Not usually necessary." +msgstr "" +"Zůstaňte v zóně tání po tuto dobu, než vytáhnete vlákno. Obvykle to není nutné." + msgid "Stealth" msgstr "Tichý" @@ -7412,24 +10212,21 @@ msgstr "Tichý režim" msgid "stealth mode" msgstr "tichý režim" +msgid "Step:" +msgstr "Krok:" + +msgid "Steps:" +msgstr "Kroky:" + +msgid "STL file exported to %s" +msgstr "Soubor STL exportován do %s" + msgid "Stop at height" msgstr "Skončit ve výšce" msgid "Stop them and continue anyway?" msgstr "Chcete i přesto pokračovat a zastavit nahrávání?" -msgid "Style" -msgstr "Styl" - -msgid "" -"Style and shape of the support towers. Projecting the supports into a " -"regular grid will create more stable supports, while snug support towers " -"will save material and reduce object scarring." -msgstr "" -"Styl a tvar podpěr. Promítnutí podpěr do pravidelné mřížky vytvoří " -"stabilnější podpěry, zatímco přiléhavé podpěry ušetří materiál a omezí " -"nežádoucí jizvy na objektu." - msgid "Success!" msgstr "Úspěch!" @@ -7437,8 +10234,14 @@ msgid "" "Successfully unmounted. The device %s(%s) can now be safely removed from the " "computer." msgstr "" -"Odpojení proběhlo úspěšné. Zařízení %s(%s) lze nyní bezpečně odebrat z " -"počítače." +"Odpojení proběhlo úspěšné. Zařízení %s(%s) lze nyní bezpečně odebrat z počítače." + +msgid "" +"SuperSlicer is a skinned version of Slic3r, based on PrusaSlicer by Prusa " +"and the original Slic3r by Alessandro Ranellucci & the RepRap community." +msgstr "" +"SuperSlicer je skinovaná verze Slic3r, založená na PrusaSlicer od Prusa a původní " +"Slic3r od Alessandra Ranellucciho a komunity RepRap." msgid "support" msgstr "podpěry" @@ -7455,6 +10258,9 @@ msgstr "Bezpečná vzdálenost podpěrné základny" msgid "Support Blocker" msgstr "Blokátor podpěr" +msgid "Support contact distance type" +msgstr "Typ vzdálenosti kontaktu podpory" + msgid "Support Cubic" msgstr "Kubický podepíraný" @@ -7470,21 +10276,57 @@ msgstr "Hrot podpěry" msgid "support interface" msgstr "kontaktní vrstva podpěr" +msgid "Support interface pattern" +msgstr "Vzor kontaktní vrstvy podpěr" + +msgid "Support interface speed" +msgstr "Rychlost kontaktní vrstvy podpěr" + msgid "Support material" msgstr "Podpěry" +msgid "support material" +msgstr "Podpěry" + +msgid "Support material extruder" +msgstr "Extrudér podpůrného materiálu" + msgid "Support material interface" msgstr "Kontaktní vrstvy podpěr" +msgid "Support material width" +msgstr "Šířka nosného materiálu" + +msgid "" +"Support material will not be generated for overhangs whose slope angle (90° " +"= vertical) is above the given threshold. In other words, this value " +"represent the most horizontal slope (measured from the horizontal plane) " +"that you can print without support material. Set zero for automatic " +"detection (recommended)." +msgstr "" +"Podpěrný materiál nebude generován pro převisy, jejichž úhel sklonu (90° = " +"vertikální) je nad daným prahem. Jinými slovy, tato hodnota představuje nejvíce " +"horizontální sklon (měřeno od horizontální roviny), který můžete vytisknout bez " +"podpůrného materiálu. Nastavte nulu pro automatickou detekci (doporučeno)." + msgid "Support material/raft interface extruder" msgstr "Extruder pro kontaktní podpěry/raft" msgid "Support on build plate only" msgstr "Pouze na tiskové podložce" +msgid "Support on thumbnail" +msgstr "Podpora na miniatuře" + msgid "Support parameter change" msgstr "Změna nastavení podpěr" +msgid "Support pattern" +msgstr "Vzor podpory" + +msgid "Support pattern angle" +msgstr "Úhel nosného vzoru" + msgid "Support pillar" msgstr "Podpěrný pilíř" @@ -7494,6 +10336,12 @@ msgstr "Hustota podpěrných bodů" msgid "Support points edit" msgstr "Úprava podpěrných bodů" +msgid "Support speed" +msgstr "Rychlost podpěr" + +msgid "Supporting dense layer" +msgstr "Podpůrná hustá vrstva" + msgid "Supports" msgstr "Podpěry" @@ -7503,9 +10351,19 @@ msgstr "podpěry a podložka" msgid "Supports remaining times" msgstr "Podpora zbývajících tiskových časů" +msgid "Supports remaining times method" +msgstr "Podporuje metodu zbývajících časů" + msgid "Supports stealth mode" msgstr "Podporuje tichý režim" +msgid "" +"Supports work better, if the following feature is enabled:\n" +"- overhangs with bridge speed & fan" +msgstr "" +"Podpory fungují lépe, pokud je povolena následující funkce:\n" +"- převisy s rychlostí mostu a ventilátorem" + msgid "Suppress \" - default - \" presets" msgstr "Potlačit “ - výchozí - “ přednastavení" @@ -7513,8 +10371,8 @@ msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" -"Potlačit “ - výchozí - “ přednastavení v nabídkách Tisk / Filament / " -"Tiskárna, jakmile budou k dispozici další platné předvolby." +"Potlačit “ - výchozí - “ přednastavení v nabídkách Tisk / Filament / Tiskárna, " +"jakmile budou k dispozici další platné předvolby." msgid "Suppress to open hyperlink in browser" msgstr "Potlačit otevírání hypertextových odkazů v prohlížeči" @@ -7528,6 +10386,9 @@ msgstr "Zaměnit osy Y/Z" msgid "Switch between Editor/Preview" msgstr "Přepínání mezi Editorem/Náhledem" +msgid "Switch between Tab" +msgstr "Přepnout mezi záložkou" + msgid "Switch code to Change extruder" msgstr "Zaměnit za příkaz na Změnu extruderu" @@ -7537,20 +10398,27 @@ msgstr "Zaměnit za příkaz na Změnu barvy (%1%) pro:" msgid "Switch to editing mode" msgstr "Přepnout do režimu editace" +msgid "Switch to Preview when sliced" +msgstr "Při Slicování přepnout na náhled" + msgid "Switch to Settings" msgstr "Přepnout do Nastavení" +msgid "Switch to the %s mode" +msgstr "Přepnout do režimu %s" + +msgid "Switch when possible" +msgstr "Prepnout kdyz je to mozne" + msgid "Switching Presets: Unsaved Changes" msgstr "Přepnutí na jiné přednastavení: Neuložené změny" msgid "" -"Switching the printer technology from %1% to %2%.\n" -"Some %1% presets were modified, which will be lost after switching the " -"printer technology." +"Switching the language will trigger application restart.\n" +"You will lose content of the platter." msgstr "" -"Přepnutí technologie tisku z %1% na %2%.\n" -"Byly upravena některá přednastavení %1%, která budou po přepnutí technologie " -"tisku ztracena." +"Přepnutí jazyka spustí restart aplikace.\n" +"Přijdete o obsah talíře." msgid "" "Switching to simple settings will discard changes done in the advanced " @@ -7558,8 +10426,7 @@ msgid "" "\n" "Do you want to proceed?" msgstr "" -"Přepnutím do jednoduchého nastavení ztratíte změny provedené v pokročilém " -"režimu!\n" +"Přepnutím do jednoduchého nastavení ztratíte změny provedené v pokročilém režimu!\n" "\n" "Opravdu chcete pokračovat?" @@ -7570,8 +10437,8 @@ msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" -"Synchronizování vrstev podpěr s vrstvami objektu. Toto je velmi užitečné u " -"multi-materiálových tiskáren, kde je přepínání extruderů drahé." +"Synchronizování vrstev podpěr s vrstvami objektu. Toto je velmi užitečné u multi-" +"materiálových tiskáren, kde je přepínání extruderů drahé." msgid "Synchronize with object layers" msgstr "Synchronizovat s vrstvami objektu" @@ -7585,33 +10452,46 @@ msgstr "Systémové informace" msgid "System presets" msgstr "Systémová přednastavení" +msgid "Tab icon size" +msgstr "Velikost ikony karty" + +msgid "" +" Tab layout: all windows are in the application, all are selectable via a " +"tab." +msgstr " Rozložení karet: všechna okna jsou v aplikaci, všechna lze vybrat pomocí záložka." + msgid "Take Configuration &Snapshot" msgstr "Prové&st Zálohu konfigurace" -msgid "Taking a configuration snapshot" -msgstr "Pořizování konfiguračního snapshotu" +msgid "Taking configuration snapshot" +msgstr "Ukládání zálohy nastavení" -msgid "Taking a configuration snapshot failed." -msgstr "Pořizování konfiguračního snapshotu selhalo." +msgid "Temp" +msgstr "Teplota" + +msgid "Temp decr:" +msgstr "Snížení teploty:" msgid "Temperature" msgstr "Teplota" -msgid "Temperature (°C)" -msgstr "Teplota (°C)" +msgid "Temperature calibration" +msgstr "Kalibrace teploty" msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" -"Teplotní rozdíl, který se použije v případě, že extruder není aktivní. " -"Umožňuje “obětní” obrysy v plné výšce objektu, na kterém jsou trysky " -"periodicky očištěny." +"Teplotní rozdíl, který se použije v případě, že extruder není aktivní. Umožňuje " +"“obětní” obrysy v plné výšce objektu, na kterém jsou trysky periodicky očištěny." msgid "Temperature variation" msgstr "Kolísání teploty" +msgid "Temperature °C" +msgstr "Teplota °C" + msgid "Temperatures" msgstr "Teploty" @@ -7621,8 +10501,8 @@ msgstr "Šablona s vlastním G-code" msgid "Test" msgstr "Test" -msgid "Text colors" -msgstr "Podbarvení textu" +msgid "Test Flow Ratio" +msgstr "Poměr zkušebního průtoku" msgid "Texture" msgstr "Textura" @@ -7638,25 +10518,24 @@ msgid "" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" -"Zařízení %s nebylo nalezeno. Pokud je zařízení připojeno, stiskněte tlačítko " -"Reset vedle USB konektoru ..." +"Zařízení %s nebylo nalezeno. Pokud je zařízení připojeno, stiskněte tlačítko Reset " +"vedle USB konektoru ..." msgid "" -"The active configuration was created by %1% %2%,\n" -"while a newer configuration was found in %3%\n" -"created by %1% %4%.\n" -"\n" -"Shall the newer configuration be imported?\n" -"If so, your active configuration will be backed up before importing the new " -"configuration." +"The convex holes will be grown / shrunk in the XY plane by the configured " +"value (negative = inwards, positive = outwards, should be negative as the " +"holes are always a bit smaller irl). This might be useful for fine-tuning " +"hole sizes.\n" +"This setting behaves the same as 'Inner XY size compensation' but only for " +"convex shapes. It's added to 'Inner XY size compensation', it does not " +"replace it. " msgstr "" -"Aktivní konfigurace byla vytvořena programem %1% %2%,\n" -"zatímco novější konfigurace byla nalezena ve složce %3%\n" -"vytvořené %1% %4%.\n" -"\n" -"Má být importována novější konfigurace?\n" -"Pokud ano, bude aktivní konfigurace před importem nové konfigurace " -"zálohována." +"Konvexní otvory se zvětší/smrští v rovině XY o nakonfigurovanou hodnotu (záporný = " +"dovnitř, pozitivní = ven, měl by být negativní, protože otvory jsou vždy o něco " +"menší). To může být užitečné pro jemné doladění velikosti otvorů .\n" +"Toto nastavení se chová stejně jako 'Kompenzace velikosti vnitřní XY', ale pouze " +"pro konvexní tvary. Je přidáno do 'Kompenzace velikosti vnitřní XY', nenahrazuje " +"ji. " msgid "" "The current custom preset will be detached from the parent system preset." @@ -7672,21 +10551,29 @@ msgid "" "once the rotation is embedded into the object coordinates." msgstr "" "Momentálně upravovaný objekt je pootočený (rotační úhly nejsou násobky 90°). " -"Nejednotné škálování nakloněných objektů je ve světových koordinátech možné " -"pouze tehdy, když je informace o rotacích zapsána do koordinátů daného " -"objektu." +"Nejednotné škálování nakloněných objektů je ve světových koordinátech možné pouze " +"tehdy, když je informace o rotacích zapsána do koordinátů daného objektu." msgid "The default angle for connecting support sticks and junctions." msgstr "Výchozí úhel pro připojení nosných tyčí a spojek." +msgid "The distance is computed from the brim and not from the objects" +msgstr "Vzdálenost se počítá od okraje a ne od objektů" + msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" -"Konce podpěrných sloupů budou rozmístěny mezi předmět a podložku. Proto musí " -"být „Bezpečná vzdálenost podpěrné základny“ větší než parametr „Mezera " -"Podložka-Objekt“." +"Konce podpěrných sloupů budou rozmístěny mezi předmět a podložku. Proto musí být " +"„Bezpečná vzdálenost podpěrné základny“ větší než parametr „Mezera Podložka-Objekt“." + +msgid "" +"The extruder to use (unless more specific extruder settings are specified) " +"for the first layer." +msgstr "" +"Extrudér, který se má použít (pokud nejsou specifikována konkrétnější nastavení " +"extrudéru) pro první vrstvu." msgid "" "The extruder to use (unless more specific extruder settings are specified). " @@ -7694,27 +10581,32 @@ msgid "" "extruders." msgstr "" "Extruder, který chcete použít (pokud nejsou zvoleny specifičtější nastavení " -"extruderu). Tato hodnota přepíše nastavení perimetrového a výplňového " -"exrtuderu, ale ne nastavení extruderu pro podpěry." +"extruderu). Tato hodnota přepíše nastavení perimetrového a výplňového exrtuderu, " +"ale ne nastavení extruderu pro podpěry." msgid "The extruder to use when printing infill." msgstr "Extruder který se použije pro tisk výplní." msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." -msgstr "" -"Extruder, který se používá při tisku perimetrů a límce. První extruder je 1." +msgstr "Extruder, který se používá při tisku perimetrů a límce. První extruder je 1." msgid "The extruder to use when printing solid infill." msgstr "Extruder který bude použit při tisku plných výplní." +msgid "" +"The extruder to use when printing support material (1+, 0 to use the current " +"extruder to minimize tool changes)." +msgstr "" +"Extrudér, který se má použít při tisku podpůrného materiálu (1+, 0 pro použití " +"aktuálního extrudéru k minimalizaci změn nástroje)." + msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" -"Extruder, který se použije při tisku kontaktních vrstev podpěr (1+, 0 pro " -"použití aktuálního extruderu, aby se minimalizovaly změny nástroje). To " -"ovlivňuje i raft." +"Extruder, který se použije při tisku kontaktních vrstev podpěr (1+, 0 pro použití " +"aktuálního extruderu, aby se minimalizovaly změny nástroje). To ovlivňuje i raft." msgid "The filament material type for use in custom G-codes." msgstr "Typ filamentu pro použití ve vlastních G-code." @@ -7729,8 +10621,14 @@ msgstr "" msgid "The firmware supports stealth mode" msgstr "Firmware podporuje tichý režim" -msgid "The following characters are not allowed by a FAT file system:" -msgstr "Následující znaky nejsou v souborovém systému FAT povoleny:" +msgid "" +"The first layer will be grown / shrunk in the XY plane by the configured " +"value to compensate for the 1st layer squish aka an Elephant Foot effect. " +"(should be negative = inwards)" +msgstr "" +"První vrstva se zvětší / smrští v rovině XY o nakonfigurovanou hodnotu, aby se " +"kompenzovalo smáčknutí 1. vrstvy neboli efekt sloní nohy. (mělo by být záporné = " +"dovnitř)" msgid "the following characters are not allowed:" msgstr "následující znaky nejsou povolené:" @@ -7738,51 +10636,15 @@ msgstr "následující znaky nejsou povolené:" msgid "The following FFF printer models have no filament selected:" msgstr "Následující modely FFF tiskáren nemají vybraný filament:" -msgid "" -"The following line %s contains reserved keywords.\n" -"Please remove it, as it may cause problems in G-code visualization and " -"printing time estimation." -msgid_plural "" -"The following lines %s contain reserved keywords.\n" -"Please remove them, as they may cause problems in G-code visualization and " -"printing time estimation." -msgstr[0] "" -"Řádek %s obsahuje vyhrazená klíčová slova.\n" -"Odstraňte jej, protože může způsobit problémy při vizualizaci G-codu a " -"odhadu času tisku." -msgstr[1] "" -"Řádky %s obsahují vyhrazená klíčová slova.\n" -"Odstraňte je, protože mohou způsobit problémy při vizualizaci G-codu a " -"odhadu času tisku." -msgstr[2] "" -"Řádky %s obsahují vyhrazená klíčová slova.\n" -"Odstraňte je, protože mohou způsobit problémy při vizualizaci G-codu a " -"odhadu času tisku." -msgstr[3] "" -"Řádky %s obsahují vyhrazená klíčová slova.\n" -"Odstraňte je, protože mohou způsobit problémy při vizualizaci G-codu a " -"odhadu času tisku." - -msgid "The following model was repaired successfully" -msgid_plural "The following models were repaired successfully" -msgstr[0] "Následující model byl úspěšně opraven" -msgstr[1] "Následující modely byly úspěšně opraveny" -msgstr[2] "Následující modely byly úspěšně opraveny" -msgstr[3] "Následující modely byly úspěšně opraveny" - -msgid "The following preset was modified" -msgid_plural "The following presets were modified" -msgstr[0] "Bylo upravena následující přednastavení" -msgstr[1] "Byla upravena následující přednastavení" -msgstr[2] "Byla upravena následující přednastavení" -msgstr[3] "Byla upravena následující přednastavení" +msgid "The following presets were modified:" +msgstr "Byla upravena následující přednastavení:" msgid "" "The following shortcuts are applicable in G-code preview when the horizontal " "slider is active" msgstr "" -"Následující zkratky jsou použitelné v náhledu G-codu, když je aktivní " -"vodorovný posuvník" +"Následující zkratky jsou použitelné v náhledu G-codu, když je aktivní vodorovný " +"posuvník" msgid "" "The following shortcuts are applicable in G-code preview when the vertical " @@ -7793,8 +10655,7 @@ msgstr "" msgid "" "The following shortcuts are applicable when the specified gizmo is active" -msgstr "" -"Následující klávesové zkratky jsou funkční při patřičném aktivním gizmu" +msgstr "Následující klávesové zkratky jsou funkční při patřičném aktivním gizmu" msgid "The following SLA printer models have no materials selected:" msgstr "Následující modely SLA tiskáren nemají vybrané žádné materiály:" @@ -7809,25 +10670,34 @@ msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "" -"Mezera mezi spodkem objektu a generovanou podložkou v režimu nulového " -"nadzvednutí." +"Mezera mezi spodkem objektu a generovanou podložkou v režimu nulového nadzvednutí." + +msgid "" +"The geometry will be decimated before dectecting sharp angles. This " +"parameter indicates the minimum length of the deviation for the decimation.\n" +"0 to deactivate" +msgstr "" +"Geometrie bude decimována před detekcí ostrých úhlů. Tento parametr udává minimální " +"délku odchylky pro decimaci.\n" +"0 pro deaktivaci" msgid "The height of the pillar base cone" msgstr "Výška ukotvení podpěrného kužele" msgid "" -"The imported SLA archive did not contain any presets. The current SLA " -"presets were used as fallback." +"The infill / perimeter encroachment can't be higher than half of the " +"perimeter width.\n" +"Are you sure to use this value?" msgstr "" -"Importovaný archiv SLA neobsahoval žádné přednastavení. Aktuální SLA " -"přednastavení bylo použito jako záložní." +"Zasahování výplně / perimetru nemůže být větší než polovina šířky perimetru.\n" +"Opravdu použijete tuto hodnotu?" msgid "" "The last color change data was saved for a multi extruder printing with tool " "changes for whole print." msgstr "" -"Poslední změny barev byly uloženy pro tisk s více extrudery se změnami " -"nástrojů během celého tisku." +"Poslední změny barev byly uloženy pro tisk s více extrudery se změnami nástrojů " +"během celého tisku." msgid "The last color change data was saved for a multi extruder printing." msgstr "Poslední změny barev byly uloženy pro tisk s více extrudery." @@ -7839,27 +10709,40 @@ msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "" -"Maximální vzdálenost dvou podpůrných pilířů pro vzájemné provázání. Nulová " -"hodnota zakáže provazování." +"Max vzdálenost dvou podpůrných pilířů pro vzájemné provázání. Nulová hodnota zakáže " +"provazování." msgid "The max length of a bridge" -msgstr "Maximální délka přemostění" +msgstr "Max délka přemostění" + +msgid "" +"The maximum detour length for avoid crossing perimeters. If the detour is " +"longer than this value, avoid crossing perimeters is not applied for this " +"travel path. Detour length can be specified either as an absolute value or " +"as percentage (for example 50%) of a direct travel path." +msgstr "" +"Maximální délka objížďky pro vyhnutí se perimetrům přechodu. Pokud je objížďka " +"delší než tato hodnota, nepoužije se perimetry vyhnutí se přechodu pro tuto " +"cestovní trasu. Délku objížďky lze zadat buď jako absolutní hodnotu, nebo v " +"procentech (například 50 %) přímou cestovní cestu." + +msgid "" +"The milling cutter to use (unless more specific extruder settings are " +"specified). " +msgstr "Fréza k použití (pokud není specifikováno přesnější nastavení extruderu). " msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" -"Minimální vzdálenost základny podpěr od modelu v mm. Dává smysl v režimu " -"nulového nadzvednutí nad podložku, kde je mezera podle tohoto parametru " -"vložena mezi model a podložku." +"Minimální vzdálenost základny podpěr od modelu v mm. Dává smysl v režimu nulového " +"nadzvednutí nad podložku, kde je mezera podle tohoto parametru vložena mezi model a " +"podložku." msgid "The name cannot be empty." msgstr "Název nesmí být prázdný." -msgid "The name cannot be the same as a preset alias name." -msgstr "Název se nesmí shodovat s názvem aliasem přednastavení." - msgid "The name cannot end with space character." msgstr "Název nesmí končit mezerou." @@ -7870,36 +10753,66 @@ msgid "" "The number of bottom solid layers is increased above bottom_solid_layers if " "necessary to satisfy minimum thickness of bottom shell." msgstr "" -"Počet spodních plných vrstev je navýšen nad zadaný počet " -"bottom_solid_layers, je-li to nutné k dosažení minimální tloušťky spodní " -"skořepiny." +"Počet spodních plných vrstev je navýšen nad zadaný počet bottom_solid_layers, je-li " +"to nutné k dosažení minimální tloušťky spodní skořepiny." + +msgid "" +"The number of layers on which the elephant foot compensation will be active. " +"The first layer will be shrunk by the elephant foot compensation value, then " +"the next layers will be gradually shrunk less, up to the layer indicated by " +"this value." +msgstr "" +"Počet vrstev, na kterých bude aktivní kompenzace sloní nohy. První vrstva se " +"zmenšuje o hodnotu kompenzace sloní nohy, další vrstvy se pak postupně zmenšují až " +"na vrstvu označenou touto hodnotou." msgid "" "The number of top solid layers is increased above top_solid_layers if " "necessary to satisfy minimum thickness of top shell. This is useful to " "prevent pillowing effect when printing with variable layer height." msgstr "" -"Počet vrchních plných vrstev je navýšen nad zadaný počet top_solid_layers, " -"je-li to nutné k dosažení minimální tloušťky vrchní skořepiny. Zabrání se " -"tak tzv. „pillowing“ efektu při tisku s proměnnou výškou vrstvy." +"Počet vrchních plných vrstev je navýšen nad zadaný počet top_solid_layers, je-li to " +"nutné k dosažení minimální tloušťky vrchní skořepiny. Zabrání se tak tzv. " +"„pillowing“ efektu při tisku s proměnnou výškou vrstvy." -msgid "The object is too small" -msgstr "Objekt je příliš malý" +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'exterior' shell of the object.\n" +" !!! it's recommended you put the same value into the 'Inner XY size " +"compensation', unless you are sure you don't have horizontal holes. !!! " +msgstr "" +"Objekt se zvětší/zmenší v rovině XY o nakonfigurovanou hodnotu (záporná = dovnitř, " +"kladná = ven). To může být užitečné pro jemné doladění velikostí.\n" +"Toto platí pouze pro 'vnější' plášť objektu.\n" +" !!! doporučujeme zadat stejnou hodnotu do 'Kompenzace vnitřní velikosti XY', pokud " +"si nejste jisti, že nemáte vodorovné otvory. !!! " + +msgid "" +"The object will be grown/shrunk in the XY plane by the configured value " +"(negative = inwards, positive = outwards). This might be useful for fine-" +"tuning sizes.\n" +"This one only applies to the 'inner' shell of the object (!!! horizontal " +"holes break the shell !!!)" +msgstr "" +"Objekt se zvětší/zmenší v rovině XY o nakonfigurovanou hodnotu (záporná = dovnitř, " +"kladná = ven). To může být užitečné pro jemné doladění velikostí.\n" +"Tohle platí pouze pro 'vnitřní' plášť předmětu (!!! horizontální otvory rozbijí " +"plášť !!!)" msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "" -"Objekt se zvýší tímto počtem vrstev a pod ním bude vytvořen podpůrný " -"materiál." +"Objekt se zvýší tímto počtem vrstev a pod ním bude vytvořen podpůrný materiál." msgid "" "The percentage of smaller pillars compared to the normal pillar diameter " "which are used in problematic areas where a normal pilla cannot fit." msgstr "" -"Procentuální velikost menších podpěrných pilířů oproti průměru normálních " -"pilířů. Menší pilíře jsou použity v problematických místech, kam se normální " -"nevejdou." +"Procentuální velikost menších podpěrných pilířů oproti průměru normálních pilířů. " +"Menší pilíře jsou použity v problematických místech, kam se normální nevejdou." msgid "" "The percentage of the bed area. \n" @@ -7911,102 +10824,40 @@ msgstr "" "bude použit pomalý náklon. V ostatních případech bude použit rychlý náklon" msgid "" -"The physical printer below is based on the preset, you are going to delete." -msgid_plural "" -"The physical printers below are based on the preset, you are going to delete." -msgstr[0] "" -"Níže uvedená fyzická tiskárna je založeny na přednastavení, které se " -"chystáte odstranit." -msgstr[1] "" -"Níže uvedené fyzické tiskárny jsou založeny na přednastavení, které se " -"chystáte odstranit." -msgstr[2] "" -"Níže uvedené fyzické tiskárny jsou založeny na přednastavení, které se " -"chystáte odstranit." -msgstr[3] "" -"Níže uvedené fyzické tiskárny jsou založeny na přednastavení, které se " -"chystáte odstranit." +"The physical printer(s) below is based on the preset, you are going to " +"delete." +msgstr "" +"Níže uvedené fyzické tiskárny(a) vycházejí z přednastavení, které chcete smazat." msgid "" -"The physical printer below is based only on the preset, you are going to " -"delete." -msgid_plural "" -"The physical printers below are based only on the preset, you are going to " +"The physical printer(s) below is based only on the preset, you are going to " "delete." -msgstr[0] "" -"Níže uvedená fyzická tiskárna je založená pouze na přednastavení, které se " -"chystáte odstranit." -msgstr[1] "" -"Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " -"chystáte odstranit." -msgstr[2] "" -"Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " -"chystáte odstranit." -msgstr[3] "" -"Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " -"chystáte odstranit." +msgstr "" +"Níže uvedená fyzická tiskárna(y) je založena pouze na přednastavení, které chcete " +"smazat." msgid "" -"The places where the brim will be printed around each object on the first " -"layer." -msgstr "Místa, kde bude kolem každého objektu v první vrstvě vytištěn límec." +"The pigment % for this filament (bewteen 0 and 1, 1=100%). 0 for translucent/" +"natural, 0.2-0.5 for white and 1 for black." +msgstr "" +"Pigment % pro toto vlákno (mezi 0 a 1, 1 = 100%). 0 pro průsvitné/přirozené, " +"0,2-0,5 pro bílé a 1 pro černé." msgid "" -"The preset below was temporarily installed on the active instance of " -"PrusaSlicer" -msgid_plural "" -"The presets below were temporarily installed on the active instance of " -"PrusaSlicer" -msgstr[0] "" -"Níže uvedené přednastavení bylo dočasně nainstalováno do aktivní instance " -"PrusaSliceru" -msgstr[1] "" -"Níže uvedená přednastavení byla dočasně nainstalována do aktivní instance " -"PrusaSliceru" -msgstr[2] "" -"Níže uvedená přednastavení byla dočasně nainstalována do aktivní instance " -"PrusaSliceru" -msgstr[3] "" -"Níže uvedená přednastavení byla dočasně nainstalována do aktivní instance " -"PrusaSliceru" +"The position of the model origin (point with coordinates x:0, y:0, z:0) " +"needs to be in the middle of the print bed area. If you load a custom model " +"and it appears misaligned, the origin is not set properly." +msgstr "" +"Pozice počátku modelu (bod se souřadnicemi x:0, y:0, z:0) musí být uprostřed " +"oblasti tiskové podložky. Pokud načtete vlastní model a zdá se, že není zarovnaný, " +"počátek není správně nastavit." -msgid "The preset modifications are successfully saved" -msgid_plural "The presets modifications are successfully saved" -msgstr[0] "Úpravy přednastavení jsou úspěšně uloženy" -msgstr[1] "Úpravy přednastavení jsou úspěšně uloženy" -msgstr[2] "Úpravy přednastavení jsou úspěšně uloženy" -msgstr[3] "Úpravy přednastavení jsou úspěšně uloženy" +msgid "The preset(s) modifications are successfully saved" +msgstr "Změny v přednastavení byly úspěšně uloženy" msgid "The printer multiplexes filaments into a single hot end." msgstr "Tiskárna přepíná několik filamentů v jednou hot endu." -msgid "The provided file name is not valid." -msgstr "Zadaný název je neplatný." - -msgid "The provided name is not valid;" -msgstr "Zadaný název není platný;" - -msgid "" -"The selected 3MF contains FDM supports painted object using a newer version " -"of PrusaSlicer and is not compatible." -msgstr "" -"Vybraný 3MF soubor obsahuje objekt s namalovanými podpěrami novější verze " -"PrusaSliceru a proto není kompatibilní." - -msgid "" -"The selected 3MF contains multi-material painted object using a newer " -"version of PrusaSlicer and is not compatible." -msgstr "" -"Vybraný 3MF soubor obsahuje objekt multimateriálovým malováním pomocí " -"novější verze PrusaSliceru a proto není kompatibilní." - -msgid "" -"The selected 3MF contains seam painted object using a newer version of " -"PrusaSlicer and is not compatible." -msgstr "" -"Vybraný 3MF soubor obsahuje objekt s namalovaný švem pomocí novější verze " -"PrusaSliceru a proto není kompatibilní." - msgid "The selected file" msgstr "Vybraný soubor" @@ -8016,18 +10867,17 @@ msgstr "Vybraný soubor neobsahuje geometrii." msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "" -"Vybraný soubor obsahuje několik nespojených ploch. Tato možnost není " -"podporována." +"Vybraný soubor obsahuje několik nespojených ploch. Tato možnost není podporována." msgid "" -"The selected object couldn't be split because it contains only one part." -msgstr "Vybraný objekt nemůže být rozdělen, protože obsahuje pouze jednu část." +"The selected object can't be split because it contains more than one volume/" +"material." +msgstr "" +"Vybraný objekt nemůže být rozdělen, protože obsahuje více než jeden objem/materiál." msgid "" -"The selected object couldn't be split because it contains only one solid " -"part." -msgstr "" -"Vybraný objekt nebylo možné rozdělit, protože obsahuje pouze jednu část." +"The selected object couldn't be split because it contains only one part." +msgstr "Vybraný objekt nemůže být rozdělen, protože obsahuje pouze jednu část." msgid "" "The selected project is no longer available.\n" @@ -8036,13 +10886,6 @@ msgstr "" "Vybraný projekt již není k dispozici.\n" "Chcete ho odstranit ze seznamu posledních projektů?" -msgid "" -"The sequential print is on.\n" -"It's impossible to apply any custom G-code for objects printing sequentually." -msgstr "" -"Sekvenční tisk je zapnutý.\n" -"Pro objekty tisknuté sekvenčním tiskem nelze použít žádný vlastní G-code." - msgid "" "The sequential print is on.\n" "It's impossible to apply any custom G-code for objects printing " @@ -8053,29 +10896,60 @@ msgstr "" "Není možné použít jakýkoliv vlastní G-kód pro objekty tisknuté sekvenčně.\n" "Během generování G-kódu nebude tento kód zpracován." +msgid "" +"The settings have a lock and dot to show how they are modified. You can hide " +"them by uncheking this option." +msgstr "" +"Nastavení jsou opatřena zámkem a tečkou, aby bylo vidět, jak jsou upravena. Můžete " +"je skrýt zrušením zaškrtnutí této možnosti." + msgid "The size of the object can be specified in inches" msgstr "Velikost objektu lze určit v palcích" -msgid "The size of the object is zero" -msgstr "Velikost objektu je nulová" - -msgid "" -"The SLA archive doesn't contain any presets. Please activate some SLA " -"printer preset first before importing that SLA archive." -msgstr "" -"SLA archiv neobsahuje žádné přednastavení. Před importem tohoto SLA archivu " -"nejprve aktivujte některé přednastavení SLA tiskárny." +msgid "The slicer detected system SSL certificate store in: %1%" +msgstr "Průřez zjistil systémové úložiště certifikátů SSL v: %1%" msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "Sklon bočnic vzhledem k podložce. 90 stupňů znamená kolmé stěny." +msgid "" +"The speed for loading of a filament into extruder after retraction (this " +"only applies to the extruder motor). If left as zero, the retraction speed " +"is used." +msgstr "" +"Rychlost pro zavádění vlákna do extrudéru po zatažení (toto platí pouze pro motor " +"extrudéru). Pokud je ponecháno na nule, použije se rychlost zatahování." + +msgid "The speed for retractions (this only applies to the extruder motor)." +msgstr "Rychlost pro zasouvání (toto platí pouze pro motor extrudéru)." + +msgid "" +"The Spiral Vase mode requires:\n" +"- one perimeter\n" +"- no top solid layers\n" +"- 0% fill density\n" +"- no support material\n" +"- Ensure vertical shell thickness enabled\n" +"- unchecked 'exact last layer height'\n" +"- unchecked 'dense infill'\n" +"- unchecked 'extra perimeters'" +msgstr "" +"Režim spirálové vázy vyžaduje:\n" +"- jeden perimetr\n" +"- žádné horní plné vrstvy\n" +"- 0% hustota výplně\n" +"- žádný podpůrný materiál\n" +"- Ujistěte se, že je povolena svislá tloušťka skořepiny\n" +"- nezaškrtnuto 'přesná výška poslední vrstvy'\n" +"- nezaškrtnuto 'hustá výplň'\n" +"- nezaškrtnuté 'extra perimetry'" + msgid "" "The Spiral Vase option can only be used when printing single material " "objects." -msgstr "" -"Možnost \"Spirálová váza\" lze použít pouze při tisku jedním materiálem." +msgstr "Možnost \"Spirálová váza\" lze použít pouze při tisku jedním materiálem." msgid "The supplied name is empty. It can't be saved." msgstr "Název je prázdný. Nelze uložit." @@ -8096,10 +10970,35 @@ msgid "The uploads are still ongoing" msgstr "Nahrávání stále probíhá" msgid "" -"The vertical distance between object and raft. Ignored for soluble interface." +"The vertical distance between object and support material interface(when the " +"support is printed on top of the object). Can be a % of the extruding width " +"used for the interface layers." msgstr "" -"Verikální vzdálenost mezi objektem a raftem. Ignorováno pro rozpustné " -"podpěry." +"Vertikální vzdálenost mezi objektem a kontaktní vrstvou (když je podpora " +"vytištěna na horní straně objektu). Může to být % šířky extruze použitá pro " +"kontaktní vrstvy." + +msgid "" +"The vertical distance between support material interface and the object(when " +"the object is printed on top of the support). Setting this to 0 will also " +"prevent Slic3r from using bridge flow and speed for the first object layer. " +"Can be a % of the extruding width used for the interface layers." +msgstr "" +"Vertikální vzdálenost mezi rozhraním nosného materiálu a objektem (když je objekt " +"vytištěn na vršek podložky). Nastavením této hodnoty na 0 také zabráníte Slic3r v " +"použití mostního toku a rychlosti pro první vrstvu objektu. Může být % šířka " +"vytlačování použitá pro vrstvy rozhraní." + +msgid "" +"The volume multiplier used to compute the final volume to extrude by the " +"algorithm." +msgstr "" +"Násobitel objemu používaný k výpočtu konečného objemu, který má algoritmus vytlačit." + +msgid "" +"The volume of melted plastic inside your nozzle. Used by 'advanced wiping'." +msgstr "" +"Objem roztaveného plastu uvnitř vaší trysky. Používá se 'pokročilým stíráním'." msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" @@ -8112,8 +11011,7 @@ msgstr "" msgid "" "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)." -msgstr "" -"Čistíví Věž v současné době nepodporuje volumetric E (use_volumetric_e = 0)." +msgstr "Čistící Věž v současné době nepodporuje objemové E (use_volumetric_e = 0)." msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " @@ -8122,9 +11020,9 @@ msgid "" "set to 0)." msgstr "" "Čistící věž v současné době podporuje pouze nerozpustné podpěry\n" -"pokud jsou vytištěny s aktuálním extrudérem bez spuštění výměny nástroje.\n" -"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je " -"třeba nastavit na 0)." +"pokud jsou vytištěny s aktuálním extruderem bez spuštění výměny nástroje.\n" +"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je třeba " +"nastavit na 0)." msgid "" "The Wipe Tower currently supports the non-soluble supports only\n" @@ -8134,15 +11032,21 @@ msgid "" "to be set to 0)." msgstr "" "Čistící věž v současné době podporuje pouze nerozpustné podpěry\n" -"pokud jsou vytištěny s aktuálním extrudérem bez spuštění výměny nástroje.\n" -"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je " -"třeba nastavit na 0)." +"pokud jsou vytištěny s aktuálním extruderem bez spuštění výměny nástroje.\n" +"(jak extruder pro tisk podpor tak extruder pro tisk kontaktních podpěr je třeba " +"nastavit na 0)." msgid "" "The Wipe Tower is currently not supported for multimaterial sequential " "prints." +msgstr "Čistící věž není momentálně podporována pro multimateriálové sekvenční tisky." + +msgid "" +"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " +"and Repetier G-code flavors." msgstr "" -"Čistící věž není momentálně podporována pro multimateriálové sekvenční tisky." +"Čistící věz je v současné době podporován pouze pro varianty Marlin, RepRap/Sprinter " +"a Repetier G-code." msgid "" "The Wipe Tower is currently only supported with the relative extruder " @@ -8155,29 +11059,29 @@ msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "" -"Čistící věž pro více objektů je možná pouze v případě, že objekty mají " -"stejný počet raft vrstev" +"Čistící věž pro více objektů je možná pouze v případě, že objekty mají stejný počet " +"raft vrstev" msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" -"Čistící věž pro více objektů je možná pouze v případě, že objekty mají " -"shodný parametr support_material_contact_distance" +"Čistící věž pro více objektů je možná pouze v případě, že objekty mají shodný " +"parametr support_material_contact_distance" msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "" -"Čistící věž je při více objektech možná pouze v případě, že objekty jsou " -"slicovány stejně." +"Čistící věž je při více objektech možná pouze v případě, že objekty jsou slicovány " +"stejně." msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "" -"Čistící věž je při více objektech možná pouze v případě, že objekty mají " -"všechny vrstvy stejné výšky" +"Čistící věž je při více objektech možná pouze v případě, že objekty mají všechny " +"vrstvy stejné výšky" msgid "" "The wipe tower is only supported if all extruders have the same nozzle " @@ -8200,8 +11104,8 @@ msgid "" "There are unprintable objects. Try to adjust support settings to make the " "objects printable." msgstr "" -"Nacházejí se zde netisknutelné objekty. Zkuste upravit nastavení podpěr tak, " -"aby bylo možné objekty vytisknout." +"Nacházejí se zde netisknutelné objekty. Zkuste upravit nastavení podpěr tak, aby " +"bylo možné objekty vytisknout." msgid "" "There is a color change for extruder that has not been used before.\n" @@ -8215,8 +11119,7 @@ msgid "" "print job.\n" "This code won't be processed during G-code generation." msgstr "" -"Dochází zde ke změně barvy u extruderu, který již do konce tisku nebude " -"použit.\n" +"Dochází zde ke změně barvy u extruderu, který již do konce tisku nebude použit.\n" "Tento kód nebude během generování G-kódu zpracován." msgid "" @@ -8226,21 +11129,145 @@ msgstr "" "Je zde změna extruderu na ten samý extruder.\n" "Během generování G-codu nebude tento kód zpracován." -msgid "There is an object with no extrusions in the first layer." -msgstr "Je zde objekt, který nemá v první vrstvě žádné extrudování." +msgid "There is an object with no extrusions on the first layer." +msgstr "Je zde objekt, u kterého nedochází k extruzi v první vrstvě." + +msgid "" +"These parameters allow the slicer to smooth the angles in each layer. The " +"precision will be at least the new precision of the curve. Set to 0 to " +"deactivate.\n" +"Note: as it uses the polygon's edges and only works in the 2D planes, you " +"must have a very clean or hand-made 3D model.\n" +"It's really only useful to smoothen functional models or very wide angles." +msgstr "" +"Tyto parametry umožňují sliceru vyhladit úhly v každé vrstvě. Přesnost bude " +"přinejmenším nová přesnost křivky. Deaktivujete nastavením na 0.\"\n" +"Poznámka: protože používá hrany polygonu a funguje pouze ve 2D rovinách, musíte mít " +"velmi čistý nebo ručně vyrobený 3D model.\"\n" +"Je to opravdu užitečné pouze pro vyhlazení funkčních modelů nebo velmi širokých " +"úhlů." + +msgid "Thin extrusions speed" +msgstr "Rychlost tenkých stěn" + +msgid "Thin wall" +msgstr "Tenké stěny" + +msgid "Thin wall merge" +msgstr "Sloučení tenkých stěn" + +msgid "Thin wall overlap" +msgstr "Překrytí tenké stěny" + +msgid "Thin walls" +msgstr "Tenké stěny" + +msgid "Thin walls min width" +msgstr "Tenké stěny min šířka" + +msgid "Thin walls speed" +msgstr "Rychlost tenkých stěn" msgid "This %s version: %s" msgstr "Tento %s verze: %s" msgid "" -"This action is not revertible.\n" +"This action is not revertable.\n" "Do you want to proceed?" msgstr "" -"Tato akce není vratná.\n" +"Tato akce je nevratná.\n" "Chcete pokračovat?" -msgid "This action will cause deletion of all ticks on vertical slider." -msgstr "Tato akce způsobí odstranění všech značek na vertikálním posuvníku." +msgid "" +"This code is inserted between objects when using sequential printing. By " +"default extruder and bed temperature are reset using non-wait command; " +"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " +"will not add temperature commands. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S{first_layer_temperature}\" command wherever you want." +msgstr "" +"Tento kód je vložen mezi objekty při použití sekvenčního tisku. Ve výchozím " +"nastavení se teplota extrudéru a lože resetuje pomocí příkazu bez čekání; pokud " +"jsou však v tomto uživatelském kódu detekovány M104, M109, M140 nebo M190, Slic3r " +"nepřidá příkazy teploty. Poznámka že můžete použít zástupné proměnné pro všechna " +"nastavení Slic3r, takže můžete zadat příkaz \"M109 S{first_layer_temperature}\" " +"kamkoli budete chtít." + +msgid "" +"This custom code is inserted at every extruder change. If you don't leave " +"this empty, you are expected to take care of the toolchange yourself - " +"Slic3r will not output any other G-code to change the filament. You can use " +"placeholder variables for all Slic3r settings as well as {previous_extruder} " +"and {next_extruder}, so e.g. the standard toolchange command can be scripted " +"as T{next_extruder}.!! Warning !!: if any character is written here, Slic3r " +"won't output any toochange command by itself." +msgstr "" +"Tento vlastní kód se vkládá při každé výměně extruderu. Pokud toto nenecháte " +"prázdné, očekává se, že se o výměnu nástroje postaráte sami - Slic3r nebude vydávat " +"žádný jiný G-kód pro změnu vlákna. Můžete použít zástupné proměnné pro všechna " +"nastavení Slic3r a také {previous_extruder} a {next_extruder}, takže např. " +"standardní příkaz toolchange lze naskriptovat jako T{next_extruder}.!! " +"Upozornění!!: pokud je zde napsán jakýkoli znak, Slic3r nevypíše žádnou změnu " +"příkaz sám o sobě." + +msgid "" +"This custom code is inserted at every extrusion type change.Note that you " +"can use placeholder variables for all Slic3r settings as well as " +"{last_extrusion_role}, {extrusion_role}, {layer_num} and {layer_z}. The " +"'extrusion_role' strings can take these string values: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, " +"TopSolidInfill, BridgeInfill, GapFill, Skirt, SupportMaterial, " +"SupportMaterialInterface, WipeTower, Mixed }. Mixed is only used when the " +"role of the extrusion is not unique, not exactly inside another category or " +"not known." +msgstr "" +"Tento vlastní kód se vkládá při každé změně typu vysunutí. Všimněte si, že můžete " +"použít zástupné proměnné pro všechna nastavení Slic3r a také pro " +"{last_extrusion_role}, {extrusion_role}, {layer_num} a {layer_z}. Řetězce " +"'extrusion_role' mohou převzít tyto hodnoty řetězce: { Perimeter, " +"ExternalPerimeter, OverhangPerimeter, InternalInfill, SolidInfill, TopSolidInfill, " +"BridgeInfill, GapFill, Skirt, SupportMaterial, SupportMaterialInterface, WipeTower, " +"Mixed }. Mixed se používá pouze v případě, že role vysunutí není jedinečná, není " +"přesně v jiné kategorii nebo neznámý." + +msgid "" +"This custom code is inserted at every layer change, right after the Z move " +"and before the extruder moves to the first layer point. Note that you can " +"use placeholder variables for all Slic3r settings as well as {layer_num} and " +"{layer_z}." +msgstr "" +"Tento vlastní kód se vkládá při každé změně vrstvy, hned po pohybu Z a předtím, než " +"se extruder přesune do bodu první vrstvy. Všimněte si, že můžete použít zástupné " +"proměnné pro všechna nastavení Slic3r a také {layer_num} a {layer_z}." + +msgid "" +"This custom code is inserted at every layer change, right before the Z move. " +"Note that you can use placeholder variables for all Slic3r settings as well " +"as {layer_num} and {layer_z}." +msgstr "" +"Tento vlastní kód je vložen při každé změně vrstvy, těsně před pohybem Z. Všimněte " +"si, že můžete použít zástupné proměnné pro všechna nastavení Slic3r a také " +"{layer_num} a {layer_z}." + +msgid "" +"This end procedure is inserted at the end of the output file, before the " +"printer end gcode (and before any toolchange from this filament in case of " +"multimaterial printers). Note that you can use placeholder variables for all " +"Slic3r settings. If you have multiple extruders, the gcode is processed in " +"extruder order." +msgstr "" +"Tato end procedura je vložena na konec výstupního souboru, před gcode konce " +"tiskárny (a před jakoukoli výměnou nástroje z tohoto vlákna v případě " +"multimateriálových tiskáren). Pamatujte, že můžete použít zástupné proměnné pro " +"všechna nastavení Slic3r. Pokud máte více extruderů, je gcode zpracován v pořadí " +"extruderů." + +msgid "" +"This end procedure is inserted at the end of the output file. Note that you " +"can use placeholder variables for all Slic3r settings." +msgstr "" +"Tato end procedura je vložena na konec výstupního souboru. Všimněte si, že můžete " +"použít zástupné proměnné pro všechna nastavení Slic3r." msgid "" "This experimental setting is used to limit the speed of change in extrusion " @@ -8248,18 +11275,52 @@ msgid "" "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" -"Toto experimentální nastavení se používá k omezení rychlosti změny " -"objemového průtoku. Hodnota 1,8mm³/s² zajišťuje, že změna objemového průtoku " -"z 1,8 mm³/s (šířka extruze 0,45 mm, výška extruze 0,2 mm, rychlost posuvu 20 " -"mm/s) na 5,4 mm³/s (rychlost posuvu 60 mm/s) potrvá nejméně 2 sekundy." +"Toto experimentální nastavení se používá k omezení rychlosti změny objemového " +"průtoku. Hodnota 1,8mm³/s² zajišťuje, že změna objemového průtoku z 1,8 mm³/s " +"(šířka extruze 0,45 mm, výška extruze 0,2 mm, rychlost posuvu 20 mm/s) na 5,4 mm³/s " +"(rychlost posuvu 60 mm/s) potrvá nejméně 2 sekundy." + +msgid "" +"This experimental setting is used to set the maximum volumetric speed your " +"extruder supports." +msgstr "" +"Toto experimentální nastavení slouží k nastavení maximální objemové rychlosti, " +"kterou váš extruder podporuje." msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" -"Toto experimentální nastavení používá příkazy G10 a G11, aby si firmware " -"poradil s retrakcí. Toto je podporováno pouze v posledních verzích firmwaru " -"Marlin." +"Toto experimentální nastavení používá příkazy G10 a G11, aby si firmware poradil s " +"retrakcí. Toto je podporováno pouze v posledních verzích firmwaru Marlin." + +msgid "" +"This experimental setting uses outputs the E values in cubic millimeters " +"instead of linear millimeters. If your firmware doesn't already know " +"filament diameter(s), you can put commands like 'M200 D{filament_diameter_0} " +"T0' in your start G-code in order to turn volumetric mode on and use the " +"filament diameter associated to the filament selected in Slic3r. This is " +"only supported in recent Marlin." +msgstr "" +"Toto experimentální nastavení používá na výstupu hodnoty E v kubických milimetrech " +"místo v lineárních milimetrech. Pokud váš firmware ještě nezná průměr(y) vlákna, " +"můžete do svého počátečního G-kódu vložit příkazy jako 'M200 D{filament_diameter_0} " +"T0' za účelem zapnutí objemového režimu a použití průměru vlákna přiřazeného k " +"vláknu vybranému v Slic3r. Toto je podporováno pouze v nejnovější verzi Marlin." + +msgid "This extruder will be set for selected items" +msgstr "Tento extruder bude nastaven pro vybrané položky" + +msgid "" +"This factor affects the amount of plastic for bridging. You can decrease it " +"slightly to pull the extrudates and prevent sagging, although default " +"settings are usually good and you should experiment with cooling (use a fan) " +"before tweaking this." +msgstr "" +"Tato hodnota určuje množství vytlačeného plastu při vytváření mostů. Mírným " +"snížením této hodnoty můžete předejít pronášení, i když přednastavené hodnoty jsou " +"většinou dobré a je lepší experimentovat s chlazením (využitím ventilátoru) než s " +"touto hodnotou." msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " @@ -8267,10 +11328,82 @@ msgid "" "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" -"Tento faktor mění poměrné množství průtoku. Možná bude třeba toto nastavení " -"vyladit pro dosažení hezkého povrchu a správné šířky jednotlivých stěn. " -"Obvyklé hodnoty jsou mezi 0,9 a 1,1. Pokud si myslíte, že hodnotu " -"potřebujete změnit více, zkontrolujte průměr filamentu a E kroky ve firmwaru." +"Tento faktor mění poměrné množství průtoku. Možná bude třeba toto nastavení vyladit " +"pro dosažení hezkého povrchu a správné šířky jednotlivých stěn. Obvyklé hodnoty " +"jsou mezi 0,9 a 1,1. Pokud si myslíte, že hodnotu potřebujete změnit více, " +"zkontrolujte průměr filamentu a E kroky ve firmwaru." + +msgid "" +"This factor changes the amount of flow proportionally. You may need to tweak " +"this setting to get nice surface finish and correct single wall widths. " +"Usual values are between 90% and 110%. If you think you need to change this " +"more, check filament diameter and your firmware E steps. This print setting " +"is multiplied against the extrusion_multiplier from the filament tab. Its " +"only purpose is to offer the same functionality but on a per-object basis." +msgstr "" +"Tento faktor proporcionálně mění množství průtoku. Možná budete muset toto " +"nastavení vyladit, abyste získali pěknou povrchovou úpravu a správné šířky " +"jednotlivých stěn. Obvyklé hodnoty jsou mezi 90 % a 110 %. Pokud si myslíte, že je " +"potřeba toto změnit více, zkontrolujte vlákno průměr a vaše kroky firmwaru E. Toto " +"nastavení tisku se vynásobí proti extrusion_multiplier na kartě filament. Jeho " +"jediným účelem je nabídnout stejnou funkcionalitu, ale na základě jednotlivých " +"objektů." + +msgid "" +"This fan speed is enforced during all infill bridges. It won't slow down the " +"fan if it's currently running at a higher speed.\n" +"Set to 1 to follow default speed.\n" +"Set to -1 to disable this override (internal bridges will use Bridges fan " +"speed).\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Tato rychlost ventilátoru je vynucena během všech výplňových mostů. Nezpomalí " +"ventilátor, pokud aktuálně běží na vyšší rychlost.\n" +"Nastavte na 1, abyste dodrželi výchozí rychlost.\n" +"Nastavením na -1 toto přepsání deaktivujete (interní mosty budou používat rychlost " +"ventilátoru mostů).\n" +"Lze přepsat pouze pomocí disable_fan_first_layers." + +msgid "" +"This fan speed is enforced during all top fills.\n" +"Set to 1 to disable the fan.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Tato rychlost ventilátoru je vynucena při všech horních plněních.\n" +"Nastavením na 1 deaktivujete ventilátor.\n" +"Pokud chcete toto přepsání deaktivovat, nastavte na -1.\n" +"Lze přepsat pouze pomocí disable_fan_first_layers." + +msgid "" +"This fan speed is enforced during bridges and overhangs. It won't slow down " +"the fan if it's currently running at a higher speed.\n" +"Set to -1 to disable this override.\n" +"Can only be overriden by disable_fan_first_layers." +msgstr "" +"Tato rychlost ventilátoru je vynucena během mostů a převisů. Nezpomalí ventilátor, " +"pokud aktuálně běží na vyšší rychlost.\n" +"Pokud chcete toto přepsání deaktivovat, nastavte na -1.\n" +"Lze přepsat pouze pomocí disable_fan_first_layers." + +msgid "" +"This feature allows you to combine infill and speed up your print by " +"extruding thicker infill layers while preserving thin perimeters, thus " +"accuracy." +msgstr "" +"Tato funkce umožňuje kombinovat výplně a urychlit tisk vytlačením silnějších " +"výplňových vrstev při zachování tenkých perimetrů, tedy přesnosti." + +msgid "" +"This feature allows you to force a solid layer every given number of layers. " +"Zero to disable. You can set this to any value (for example 9999); Slic3r " +"will automatically choose the maximum possible number of layers to combine " +"according to nozzle diameter and layer height." +msgstr "" +"Tato funkce vám umožňuje vynutit vytvoření pevné vrstvy pro každý daný počet " +"vrstev. Nula pro deaktivaci. Tuto hodnotu můžete nastavit na libovolnou hodnotu " +"(například 9999); Slic3r automaticky vybere maximální možný počet vrstev ke spojení " +"podle průměru trysky a výška vrstvy." msgid "" "This feature will raise Z gradually while printing a single-walled object in " @@ -8279,28 +11412,27 @@ msgid "" "any number of bottom solid layers as well as skirt/brim loops. It won't work " "when printing more than one single object." msgstr "" -"Tato funkce zvýší postupně Z při tisku jednovrstvého objektu, aby se " -"odstranil jakýkoli viditelný šev. Tato volba vyžaduje jediný obvod, žádnou " -"výplň, žádné vrchní plné vrstvy a žádný podpůrný materiál. Můžete stále " -"nastavit libovolný počet spodních plných vrstev, stejně jako obrysové " -"smyčky / límec. Při tisku více než jednoho samostatného objektu nebude toto " -"nastavení fungovat." +"Tato funkce zvýší postupně Z při tisku jednovrstvého objektu, aby se odstranil " +"jakýkoli viditelný šev. Tato volba vyžaduje jediný perimetr, žádnou výplň, žádné " +"vrchní plné vrstvy a žádný podpůrný materiál. Můžete stále nastavit libovolný počet " +"spodních plných vrstev, stejně jako obrysové smyčky / límec. Při tisku více než " +"jednoho samostatného objektu nebude toto nastavení fungovat." msgid "" "This file cannot be loaded in a simple mode. Do you want to switch to an " "advanced mode?" msgstr "" -"Tento soubor nelze načíst v jednoduchém režimu. Chcete přepnout do " -"pokročilého režimu?" +"Tento soubor nelze načíst v jednoduchém režimu. Chcete přepnout do pokročilého " +"režimu?" msgid "" "This file contains several objects positioned at multiple heights.\n" -"Instead of considering them as multiple objects, should \n" -"the file be loaded as a single object having multiple parts?" +"Instead of considering them as multiple objects, should I consider\n" +"this file as a single object having multiple parts?" msgstr "" -"Tento soubor obsahuje několik objektů umístěných v různých výškách.\n" -"Místo toho, aby se s nimi pracovalo jako se separátními objekty, \n" -"mají být načteny jako jeden objekt, který má více částí?" +"Tento soubor obsahuje několik objektů umístěných v různých výškách. Mají být " +"vloženy jako jeden objekt obsahující více částí,\n" +"namísto vložení několika objektů?" msgid "" "This firmware hex file does not match the printer model.\n" @@ -8321,8 +11453,30 @@ msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "" -"Zapne výpočet automatického chlazení, který upravuje rychlost tisku a " -"ventilátoru v závislosti na délce tisku jedné vrstvy." +"Zapne výpočet automatického chlazení, který upravuje rychlost tisku a ventilátoru v " +"závislosti na délce tisku jedné vrstvy." + +msgid "" +"This flag enables the brim that will be printed around each object on the " +"first layer." +msgstr "" +"Tato vlajka zapíná límec, který bude vytištěn kolem každého objektu při první " +"vrstvě." + +msgid "This flag enforces a retraction whenever a Z move is done (before it)." +msgstr "Tento příznak vynucuje stažení vždy, když je proveden pohyb Z (před ním)." + +msgid "" +"This flag will move the nozzle while retracting to minimize the possible " +"blob on leaky extruders.\n" +"Note that as a wipe only happens when there is a retraction, the 'only " +"retract when crossing perimeters' print setting can greatly reduce the " +"number of wipes." +msgstr "" +"Tento příznak přesune trysku při zatahování, aby se minimalizovala možná skvrna na " +"netěsných extrudérech.\n" +"Všimněte si, že utírání se děje pouze při zatažení, nastavení tisku 'pouze při " +"překročení perimetru' může výrazně snížit počet stírání." msgid "This G-code will be used as a code for the color change" msgstr "Tento G-code bude použit jako kód pro změnu barvy" @@ -8333,7 +11487,16 @@ msgstr "Tento G-code bude použit jako kód pro pozastavení tisku" msgid "This G-code will be used as a custom code" msgstr "Tento G-code bude použit jako vlastní kód" -msgid "This is a default preset." +msgid "" +"This increases the size of the object by a certain amount to have enough " +"plastic to mill. You can set a number of mm or a percentage of the " +"calculated optimal extra width (from flow calculation)." +msgstr "" +"Tím se zvětší velikost objektu o určité množství, aby bylo dost plastu na " +"frézování. Můžete nastavit počet mm nebo procento vypočítané optimální extra šířky " +"(z výpočtu průtoku)." + +msgid "This is a default preset." msgstr "Toto je výchozí přednastavení." msgid "This is a relative measure of support points density." @@ -8343,32 +11506,209 @@ msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" -"Jedná se o multimateriálovou tiskárnu s jedním extruderem, průměry všech " -"extruderů se nastaví na novou hodnotu. Chcete pokračovat?" +"Jedná se o multimateriálovou tiskárnu s jedním extruderem, průměry všech extruderů " +"se nastaví na novou hodnotu. Chcete pokračovat?" msgid "This is a system preset." msgstr "Toto je systémové přednastavení." +msgid "This is only used in Slic3r interface as a visual help." +msgstr "Toto je v Slic3ru jako názorná pomoc." + msgid "This is only used in the Slic3r interface as a visual help." msgstr "Toto je v Slic3ru jako názorná pomoc." +msgid "" +"This is the acceleration your printer will be reset to after the role-" +"specific acceleration values are used (perimeter/infill). \n" +"You can set it as a % of the max of the X machine acceleration limit.\n" +"Set zero to prevent resetting acceleration at all." +msgstr "" +"Toto je zrychlení, na které bude vaše tiskárna resetována po použití hodnot " +"zrychlení specifických pro roli (perimetr/výplň). \n" +"Můžete to nastavit jako % z maxima limitu zrychlení X stroje.\n" +"Nastavte nulu, abyste vůbec zabránili resetování zrychlení." + +msgid "" +"This is the acceleration your printer will use for bridges.\n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for bridges.\n" +"Note that it won't be applied to overhangs, they still use the perimeter " +"acceleration." +msgstr "" +"Toto je zrychlení, které tiskárna použije pro mosty.\n" +"Může být % výchozího zrychlení\n" +"Nastavte nulu pro deaktivaci ovládání zrychlení pro mosty.\n" +"Všimněte si, že to nebude aplikováno na převisy, stále používají zrychlení " +"perimetru ." + +msgid "" +"This is the acceleration your printer will use for first layer.\n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for first layer." +msgstr "" +"Toto je zrychlení, které tiskárna použije pro první vrstvu.\n" +"Může být % výchozího zrychlení\n" +"Nastavte nulu pro deaktivaci ovládání zrychlení pro první vrstvu." + +msgid "" +"This is the acceleration your printer will use for infill.\n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for infill." +msgstr "" +"Toto je zrychlení, které tiskárna použije pro vyplnění.\n" +"Může být % výchozího zrychlení\n" +"Nastavte nulu pro deaktivaci ovládání zrychlení pro výplň." + +msgid "" +"This is the acceleration your printer will use for perimeters. \n" +"Can be a % of the default acceleration\n" +"Set zero to disable acceleration control for perimeters." +msgstr "" +"Toto je zrychlení, které tiskárna použije pro perimetry. \n" +"Může být % výchozího zrychlení\n" +"Nastavte nulu pro deaktivaci řízení zrychlení pro perimetry." + +msgid "This is the color that will be enforced on objects in the thumbnails." +msgstr "Toto je barva, která bude vynucena na objektech v miniaturách." + +msgid "" +"This is the DEFAULT extrusion spacing. It's convert to a width and this " +"width can be used to REPLACE 0-width fields. It's useless when all width " +"fields have a value.Like Default extrusion width but spacing is the distance " +"between two lines (as they overlap a bit, it's not the same).\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Toto je VÝCHOZÍ rozestup vysunutí. Převádí se na šířku a tuto šířku lze použít k " +"NAHRAZENÍ polí o šířce 0. Je to zbytečné, když všechna pole šířky mají hodnotu. " +"Stejně jako výchozí šířka vysunutí, ale mezera je vzdálenost mezi dvěma řádky (jako " +"trochu se překrývají, není to totéž).\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "" +"This is the DEFAULT extrusion width. It's ONLY used to REPLACE 0-width " +"fields. It's useless when all other width fields have a value.Set this to a " +"non-zero value to allow a manual extrusion width. If left to zero, Slic3r " +"derives extrusion widths from the nozzle diameter (see the tooltips for " +"perimeter extrusion width, infill extrusion width etc). If expressed as " +"percentage (for example: 105%), it will be computed over nozzle diameter.\n" +"You can set either 'Spacing', or 'Width'; the other will be calculated, " +"using the perimeter 'Overlap' percentages and default layer height." +msgstr "" +"Toto je VÝCHOZÍ šířka vysunutí. Používá se POUZE k NAHRAZENÍ polí o šířce 0. Je to " +"k ničemu, když všechna ostatní pole šířky mají hodnotu. Nastavte tuto hodnotu na " +"nenulovou hodnotu, abyste povolili šířku ručního vysunutí. Pokud je ponecháno na " +"nule, Slic3r odvozuje šířky vytlačování z průměru trysky (viz popisky pro šířku " +"vysunutí po perimetru, šířku vysunutí výplně atd.). Pokud je vyjádřena v procentech " +"(například: 105 %), bude vypočítána přes průměr trysky.\n" +"Můžete nastavit buď 'Spacing', nebo 'Width'; druhá bude vypočítána pomocí procent " +"'překrytí' perimetru a výchozí výšky vrstvy." + +msgid "This is the diameter of your cutting tool." +msgstr "Toto je průměr vašeho řezného nástroje." + msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "Průměr trysky extruderu (například: 0.5, 0.35 atd.)" -msgid "This is wipe tower layer" -msgstr "Toto je vrstva čistící věže" +msgid "" +"This is the highest printable layer height for this extruder, used to cap " +"the variable layer height and support layer height. Maximum recommended " +"layer height is 75% of the extrusion width to achieve reasonable inter-layer " +"adhesion. \n" +"Can be a % of the nozzle diameter.\n" +"If set to 0, layer height is limited to 75% of the nozzle diameter." +msgstr "" +"Toto je nejvyšší tisknutelná výška vrstvy pro tento extrudér, která se používá k " +"omezení proměnlivé výšky vrstvy a výšky nosné vrstvy. Maximální doporučená výška " +"vrstvy je 75 % šířky vytlačování, aby se dosáhlo rozumné přilnavosti mezi " +"vrstvami. \n" +"Může být % z průměru trysky.\n" +"Pokud je nastaveno na 0, výška vrstvy je omezena na 75 % průměru trysky." + +msgid "" +"This is the lowest printable layer height for this extruder and limits the " +"resolution for variable layer height. Typical values are between 0.05 mm and " +"0.1 mm.\n" +"Can be a % of the nozzle diameter." +msgstr "" +"Toto je nejnižší výška tisknutelné vrstvy pro tento extrudér a omezuje rozlišení " +"pro proměnnou výšku vrstvy. Typické hodnoty jsou mezi 0,05 mm a 0,1 mm.\n" +"Může být % z průměru trysky." + +msgid "" +"This is the percentage of the flow that is used for the second ironing pass. " +"Typical 10-20%. Should not be higher than 20%, unless you have your top " +"extrusion width greatly superior to your nozzle width. A value too low and " +"your extruder will eat the filament. A value too high and the first pass " +"won't print well." +msgstr "" +"Toto je procento toku použitého pro druhý ironing průchod. Obvykle 10–20 %. Nemělo " +"by být vyšší než 20 %, pokud nemáte šířku horního vytlačování výrazně větší než " +"šířku trysky. Příliš nízká hodnota váš extrudér sežere vlákno. Příliš vysoká " +"hodnota a první průchod nebude dobře tisknout." + +msgid "" +"This is the rounding error of the input object. It's used to align points " +"that should be in the same line.\n" +"Set zero to disable." +msgstr "" +"Toto je chyba zaokrouhlení vstupního objektu. Používá se k zarovnání bodů, které by " +"měly být na stejném řádku.\n" +"Nastavit nulu pro zakázání." + +msgid "" +"This is the width of the ironing pass, in a % of the top infill extrusion " +"width, should not be more than 50% (two times more lines, 50% overlap). It's " +"not necessary to go below 25% (four times more lines, 75% overlap). \n" +"If you have problems with your ironing process, don't forget to look at the " +"flow->above bridge flow, as this setting should be set to min 110% to let " +"you have enough plastic in the top layer. A value too low will make your " +"extruder eat the filament." +msgstr "" +"Toto je šířka ironing průchodu, v % šířky extruze horní výplně, by neměla být " +"větší než 50 % (dvakrát více čar, 50 % překrytí). Není nutné jít pod 25 % " +"(čtyřikrát více řádky, 75% překrytí). \n" +"Pokud máte problémy s procesem ironing, nezapomeňte se podívat na průtok -> nad " +"průtokem můstku, protože toto nastavení by mělo být nastaveno na min. 110 %, abyste " +"měli dostatek plastu v horní vrstvě. Příliš nízká hodnota přiměje váš extrudér " +"sežrat vlákno." + +msgid "" +"This is usually caused by negligibly small extrusions or by a faulty model. " +"Try to repair the model or change its orientation on the bed." +msgstr "" +"To je obvykle způsobeno zanedbatelně malým množstvím extrudovaného materiálu nebo " +"chybným modelem. Zkuste model opravit nebo změnit jeho orientaci na podložce." msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools. " msgstr "" -"Tato matice popisuje objemy (v kubických milimetrech) nutné k vyčištění " -"nového filamentu na čistící věži pro danou dvojici nástrojů. " +"Tato matice popisuje objemy (v kubických milimetrech) nutné k vyčištění nového " +"filamentu na čistící věži pro danou dvojici nástrojů. " msgid "" -"This may cause problems in g-code visualization and printing time estimation." -msgstr "Může to způsobit problémy při vizualizaci g-codu a odhadu doby tisku." +"This offset wil be added to all fan values set in the filament properties. " +"It won't make them go higher than 100% nor lower than 0%." +msgstr "" +"Toto posunutí bude přidáno ke všem hodnotám ventilátoru nastaveným ve vlastnostech " +"vlákna. Nedonutí je jít výše než 100 % ani nižší než 0 %." + +msgid "" +"This offset will be added to all extruder temperatures set in the filament " +"settings.\n" +"Note that you should set 'M104 S{first_layer_temperature{initial_extruder} + " +"extruder_temperature_offset{initial_extruder}}'\n" +"instead of 'M104 S{first_layer_temperature}' in the start_gcode" +msgstr "" +"Tento posun bude přidán ke všem teplotám extruderu nastaveným v nastavení vlákna.\n" +"Všimněte si, že byste měli nastavit 'M104 " +"S{first_layer_temperature{initial_extruder} + " +"extruder_temperature_offset{initial_extruder}}'\n" +"místo 'M104 S{first_layer_temperature}' v start_gcode" msgid "" "This operation is irreversible.\n" @@ -8383,27 +11723,167 @@ msgid "" "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" -"Tato volba nastavuje počet perimetrů, které je třeba vygenerovat pro každou " -"vrstvu. Slic3r může toto číslo automaticky zvýšit, pokud detekuje šikmé " -"plochy, které se tisknou lépe s vyšším počtem perimetrů, pokud je zapnuta " -"možnost Extra perimetry." +"Tato volba nastavuje počet perimetrů, které je třeba vygenerovat pro každou vrstvu. " +"Slic3r může toto číslo automaticky zvýšit, pokud detekuje šikmé plochy, které se " +"tisknou lépe s vyšším počtem perimetrů, pokud je zapnuta možnost Extra perimetry." msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" -"Tato volba sníží teplotu neaktivních extruderů, aby u nich nedošlo k " -"vytékání." +"Tato volba sníží teplotu neaktivních extruderů, aby u nich nedošlo k vytékání." + +msgid "" +"This option will limit infill to the areas actually needed for supporting " +"ceilings (it will act as internal support material). If enabled, this slows " +"down the G-code generation due to the multiple checks involved." +msgstr "" +"Tato možnost omezí výplň na oblasti skutečně potřebné pro podepření stropů (bude " +"fungovat jako vnitřní podpůrný materiál). Pokud je povolena, zpomaluje generování G-" +"kódu kvůli vícenásobným kontrolám." msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "Tato volba obrátí pořadí tisku perimetrů a výplní." +msgid "" +"This parameter grows the bridged solid infill layers by the specified mm to " +"anchor them into the sparse infill and over the perimeters below. Put 0 to " +"deactivate it. Can be a % of the width of the external perimeter." +msgstr "" +"Tento parametr zvětší přemostěné pevné výplňové vrstvy o zadaný mm, aby je ukotvil " +"do řídké výplně a přes perimetry pod ním. Zadáním 0 jej deaktivujete. Může to být % " +"z šířky vnějšího perimetru." + +msgid "" +"This parameter grows the top/bottom/solid layers by the specified mm to " +"anchor them into the sparse infill and support the perimeters above. Put 0 " +"to deactivate it. Can be a % of the width of the perimeters." +msgstr "" +"Tento parametr zvětší horní/spodní/plné vrstvy o zadaný mm, aby je ukotvil do řídké " +"výplně a podpořil perimetry nad nimi. Zadáním 0 jej deaktivujete. Může to být % z " +"šířky perimetrů." + msgid "This printer will be shown in the presets list as" msgstr "Tato tiskárna se v seznamu přednastavení zobrazí jako" +msgid "" +"This separate setting will affect the speed of external perimeters (the " +"visible ones). If expressed as percentage (for example: 80%) it will be " +"calculated on the perimeters speed setting above. Set zero for auto." +msgstr "" +"Toto samostatné nastavení ovlivní rychlost vnějších perimetrů (viditelných). Pokud " +"je vyjádřeno v procentech (například: 80%), bude vypočítáno podle výše uvedeného " +"nastavení rychlosti perimetru. Nastavte nulu pro auto." + +msgid "" +"This separate setting will affect the speed of perimeters having radius <= " +"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " +"be calculated on the perimeters speed setting above.\n" +"Set zero to disable." +msgstr "" +"Toto samostatné nastavení ovlivní rychlost perimetrů s poloměrem <= 6,5 mm (obvykle " +"otvory). Pokud je vyjádřeno v procentech (například: 80%), bude vypočítáno podle " +"výše uvedeného nastavení rychlosti perimetrů.\n" +"Nastavit nulu pro zakázání." + +msgid "" +"This sets the end of the threshold for small perimeter length. Every " +"perimeter loop lower than this will see their speed reduced a bit, from " +"their normal speed at this length down to small perimeter speed.\n" +"Can be a mm or a % of the nozzle diameter." +msgstr "" +"Tím se nastavuje konec prahu pro malou délku perimetru . U každé obvodové smyčky " +"nižší než tato se jejich rychlost o něco sníží, z normální rychlosti na této délce " +"na malou rychlost perimetru .\n" +"Může být mm nebo % z průměru trysky." + +msgid "" +"This sets the threshold for small perimeter length. Every loop with a length " +"lower than this will be printed at small perimeter speed\n" +"Can be a mm value or a % of the nozzle diameter." +msgstr "" +"Toto nastavuje práh pro malou délku perimetru . Každá smyčka s délkou menší než " +"tato bude vytištěna malou rychlostí perimetru \n" +"Může to být hodnota mm nebo % z průměru trysky." + +msgid "" +"This setting allows you to modify the time estimation by a % amount. As " +"Slic3r only uses the Marlin algorithm, it's not precise enough if another " +"firmware is used." +msgstr "" +"Toto nastavení vám umožňuje upravit odhad času o procentuální hodnotu. Protože " +"Slic3r používá pouze Marlin algoritmus, není dostatečně přesný, pokud je použit " +"jiný firmware." + +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"external one, to reduce the impact of the perimeters' artifacts. 100% means " +"that no gap is left, and 0% means that the external perimeter isn't " +"contributing to the overlap with the 'inner' one.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Toto nastavení vám umožňuje snížit překrytí mezi perimetry a vnějším perimetrem, " +"abyste snížili dopad artefaktů perimetru. 100 % znamená, že nezůstane žádná mezera, " +"a 0 % znamená, že vnější perimetr nepřispívá k překrývají s 'vnitřním'.\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být " +"odstraněno, pokud pro to není k ničemu." + +msgid "" +"This setting allows you to reduce the overlap between the perimeters and the " +"gap fill. 100% means that no gaps are left, and 0% means that the gap fill " +"won't touch the perimeters.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Toto nastavení umožňuje snížit překrytí mezi perimetry a výplní mezery. 100 " +"% znamená, že nezůstanou žádné mezery, a 0 % znamená, že výplň mezery se nebude " +"dotýkat perimetrů.\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být " +"odstraněno, pokud pro to není k ničemu." + +msgid "" +"This setting allows you to reduce the overlap between the perimeters, to " +"reduce the impact of the perimeters' artifacts. 100% means that no gap is " +"left, and 0% means that perimeters are not touching each other anymore.\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Toto nastavení umožňuje snížit překrytí mezi perimetry a snížit dopad artefaktů " +"perimetrů. 100 % znamená, že nezůstala žádná mezera, a 0 % znamená, že se perimetry " +"již vzájemně nedotýkají.\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být " +"odstraněn, pokud pro něj není použití." + +msgid "" +"This setting applies an additional overlap between infill and perimeters for " +"better bonding. Theoretically this shouldn't be needed, but backlash might " +"cause gaps. If expressed as percentage (example: 15%) it is calculated over " +"perimeter extrusion width.\n" +"Don't put a value higher than 50% (of the perimeter width), as it will fuse " +"with it and follow the perimeter." +msgstr "" +"Toto nastavení aplikuje další překrytí mezi výplní a perimetry pro lepší spojení. " +"Teoreticky by to nemělo být potřeba, ale vůle může způsobit mezery. Pokud je " +"vyjádřena v procentech (příklad: 15%), počítá se přes perimetrovou šířku vysunutí.\n" +"Nezadávejte hodnotu vyšší než 50 % (šířky perimetru), protože se s ní spojí a bude " +"sledovat perimetr." + +msgid "" +"This setting control by how much the speed can be reduced to increase the " +"layer time. It's a maximum reduction, so a lower value makes the minimum " +"speed higher. Set to 90% if you don't want the speed to go below 10% of the " +"current speed.\n" +"Set zero to disable" +msgstr "" +"Toto nastavení řídí, o kolik lze snížit rychlost, aby se prodloužila doba vrstvy. " +"Jde o maximální snížení, takže nižší hodnota zvyšuje minimální rychlost. Nastavte " +"na 90 %, pokud nechcete, aby rychlost klesla pod 10 % aktuální rychlosti.\n" +"Pro deaktivaci nastavte nulu" + msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." @@ -8412,11 +11892,151 @@ msgstr "" "poskytuje lepší přesnost, ale tiskne se déle." msgid "" -"This string is edited by RammingDialog and contains ramming specific " -"parameters." +"This setting controls the height of last object layers to put the last layer " +"at the exact highest height possible. Experimental." +msgstr "" +"Toto nastavení řídí výšku posledních vrstev objektů, aby byla poslední vrstva " +"přesně v nejvyšší možné výšce. Experimentální." + +msgid "" +"This setting is used to set the maximum speed when extruding inside the wipe " +"tower (use M220). In %, set 0 to disable and use the Filament type instead.\n" +"If disabled, these filament types will have a defaut value of:\n" +" - PVA: 80% to 60%\n" +" - SCAFF: 35%\n" +" - FLEX: 35%\n" +" - OTHERS: 100%\n" +"Note that the wipe tower reset the speed at 100% for the unretract in any " +"case.\n" +"If using marlin, M220 B/R is used to save the speed override before the wipe " +"tower print." +msgstr "" +"Toto nastavení se používá k nastavení maximální rychlosti při vytlačování uvnitř " +"stírací věže (použijte M220). V %, nastavte 0 pro deaktivaci a místo toho použijte " +"typ vlákna.\n" +"Pokud je zakázáno, tyto typy vláken budou mít výchozí hodnotu:\n" +" - PVA: 80 % až 60 %\n" +" - SCAFF: 35 %\n" +" - FLEX: 35 %\n" +" - OSTATNÍ: 100 %\n" +"Všimněte si, že stírací věž v každém případě resetovala rychlost na 100% pro " +"odtažení.\n" +"Pokud používáte marlin, M220 B/R se používá k uložení přepsání rychlosti před " +"tiskem stírací věže." + +msgid "" +"This setting may slightly degrade the quality of your external perimeter, in " +"exchange for a better bonding between perimeters.Use it if you have great " +"difficulties with perimeter bonding, for example with high temperature " +"filaments.\n" +"This percentage is the % of overlap between perimeters, a bit like " +"perimeter_overlap and external_perimeter_overlap, but in reverse. You have " +"to set perimeter_overlap and external_perimeter_overlap to 100%, or this " +"setting has no effect. 0: no effect, 50%: half of the nozzle will be over an " +"already extruded perimeter while extruding a new one, unless it's an " +"external one).\n" +"It's very experimental, please report about the usefulness. It may be " +"removed if there is no use for it." +msgstr "" +"Toto nastavení může mírně zhoršit kvalitu vašeho vnějšího perimetru výměnou za " +"lepší spojení mezi perimetry. Použijte jej, pokud máte velké potíže s lepením po " +"perimetru, například s vysokoteplotními vlákny.\n" +"Toto procento je % překrytí mezi perimetry, trochu jako perimeter_overlap a " +"external_perimeter_overlap, ale obráceně. Musíte nastavit perimeter_overlap a " +"external_perimeter_overlap na 100 %, jinak toto nastavení nemá žádný vliv. 0: žádný " +"účinek, 50 %: polovina tryska bude při vytlačování nové přes již vytlačený " +"perimetr, pokud se nejedná o externí).\n" +"Je to velmi experimentální, prosím podejte zprávu o užitečnosti. Může být " +"odstraněno, pokud pro to není k ničemu." + +msgid "" +"This setting represents the base fan speed this filament needs, or at least " +"the minimum PWM your fan needs to work." +msgstr "" +"Toto nastavení představuje základní rychlost ventilátoru, kterou toto vlákno " +"potřebuje, nebo alespoň minimální PWM, kterou váš ventilátor potřebuje k provozu." + +msgid "" +"This setting represents the maximum speed of your fan, used when the layer " +"print time is Very short." +msgstr "" +"Toto nastavení představuje maximální rychlost vašeho ventilátoru, která se používá, " +"když je doba tisku vrstvy velmi krátká." + +msgid "" +"This setting represents the minimum mm² for a gapfill extrusion to be " +"created.\n" +"Can be a % of (perimeter width)²" +msgstr "" +"Toto nastavení představuje minimální mm² pro vytvoření vytlačování s výplní mezer.\n" +"Může být % z (šířky perimetru)²" + +msgid "" +"This setting restricts the post-process milling to a certain height, to " +"avoid milling the bed. It can be a mm or a % of the first layer height (so " +"it can depend on the object)." msgstr "" +"Toto nastavení omezuje následné frézování na určitou výšku, aby se zabránilo " +"frézování lože. Může to být mm nebo % výšky první vrstvy (může tedy záviset na " +"objektu)." + +msgid "" +"This setting will ensure that all 'overlap' are not higher than this value. " +"This is useful for filaments that are too viscous, as the line can't flow " +"under the previous one." +msgstr "" +"Toto nastavení zajistí, že všechny 'překryvy' nebudou vyšší než tato hodnota. To je " +"užitečné pro vlákna, která jsou příliš viskózní, protože šňůra nemůže podlévat " +"předchozí." + +msgid "" +"This start procedure is inserted at the beginning, after any printer start " +"gcode (and after any toolchange to this filament in case of multi-material " +"printers). This is used to override settings for a specific filament. If " +"Slic3r detects M104, M109, M140 or M190 in your custom codes, such commands " +"will not be prepended automatically so you're free to customize the order of " +"heating commands and other custom actions. Note that you can use placeholder " +"variables for all Slic3r settings, so you can put a \"M109 " +"S{first_layer_temperature}\" command wherever you want. If you have multiple " +"extruders, the gcode is processed in extruder order." +msgstr "" +"Tato procedura spouštění se vkládá na začátek, po každém gkódu spuštění tiskárny (a " +"po jakékoli změně nástroje na toto vlákno v případě tiskáren s více materiály). " +"Používá se k přepsání nastavení pro konkrétní vlákno. Pokud Slic3r detekuje M104, " +"M109, M140 nebo M190 ve vašich vlastních kódech, takové příkazy nebudou automaticky " +"přidávány před, takže si můžete sami přizpůsobit pořadí příkazů vytápění a dalších " +"vlastních akcí. Všimněte si, že pro všechna nastavení Slic3r můžete použít zástupné " +"proměnné, takže můžete zadat Příkaz \"M109 S{first_layer_temperature}\" kdekoli " +"chcete. Pokud máte více extruderů, gcode se zpracovává v pořadí extruderů." + +msgid "" +"This start procedure is inserted at the beginning, after bed has reached the " +"target temperature and extruder has just started heating, but before " +"extruder has finished heating. If Slic3r detects M104 or M190 in your custom " +"codes, such commands will not be prepended automatically so you're free to " +"customize the order of heating commands and other custom actions. Note that " +"you can use placeholder variables for all Slic3r settings, so you can put a " +"\"M109 S{first_layer_temperature}\" command wherever you want.\n" +" placeholders: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, " +"bounding_box[minx,miny,maxx,maxy]" +msgstr "" +"Tato procedura spouštění je vložena na začátku poté, co lože dosáhlo cílové teploty " +"a extrudér právě začal zahřívat, ale předtím, než extrudér dokončil ohřev. Pokud " +"Slic3r detekuje M104 nebo M190 ve vašich vlastních kódech, takové příkazy nebudou " +"automaticky přidány, takže můžete si upravit pořadí příkazů ohřevu a dalších " +"vlastních akcí. Všimněte si, že pro všechna nastavení Slic3r můžete použít zástupné " +"proměnné, takže příkaz \"M109 S{first_layer_temperature}\" můžete zadat kamkoli " +"chcete.\n" +" zástupné symboly: initial_extruder, total_layer_count, has_wipe_tower, " +"has_single_extruder_multi_material_priming, total_toolchanges, bounding_box[minx," +"miny,maxx,maxy]" + +msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." +msgstr "" +"This string is edited by RammingDialog and contains ramming specific parameters." msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " @@ -8424,19 +12044,19 @@ msgid "" "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" -"Tato hodnota bude přidána (nebo odečtena) ze všech souřadnic Z ve výstupním " -"G-code. Používá se ke kompenzování špatné pozice endstopu Z. Například pokud " -"endstop 0 skutečně ponechá trysku 0,3 mm daleko od tiskové podložky, " -"nastavte hodnotu -0,3 (nebo dolaďte svůj koncový doraz)." +"Tato hodnota bude přidána (nebo odečtena) ze všech souřadnic Z ve výstupním G-code. " +"Používá se ke kompenzování špatné pozice endstopu Z. Například pokud endstop 0 " +"skutečně ponechá trysku 0,3 mm daleko od tiskové podložky, nastavte hodnotu -0,3 " +"(nebo dolaďte svůj koncový doraz)." msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below. " msgstr "" -"Tento vektor ukládá potřebné objemy pro změnu z/na každý extruder používaný " -"na čistící věži. Tyto hodnoty jsou použity pro zjednodušení vytvoření " -"celkových objemů čištění níže. " +"Tento vektor ukládá potřebné objemy pro změnu z/na každý extruder používaný na " +"čistící věži. Tyto hodnoty jsou použity pro zjednodušení vytvoření celkových objemů " +"čištění níže. " msgid "" "This version of %s is not compatible with currently installed configuration " @@ -8448,23 +12068,33 @@ msgid "" "the initial configuration. Doing so will create a backup snapshot of the " "existing configuration before installing files compatible with this %s." msgstr "" -"Tato verze %s není kompatibilní se současně nainstalovanými balíčky " -"nastavení.\n" +"Tato verze %s není kompatibilní se současně nainstalovanými balíčky nastavení.\n" "Tato situace nejspíše nastala spuštěním starší verze %s po používání novější " "verze.\n" "\n" -"Můžete buď ukončit %s a zkusit to znovu s novou verzí, nebo můžete znovu " -"spustit výchozí konfiguraci. Před instalací kompatibilního nastavení s touto " -"verzí %s dojde k vytvoření zálohy současné konfigurace." +"Můžete buď ukončit %s a zkusit to znovu s novou verzí, nebo můžete znovu spustit " +"výchozí konfiguraci. Před instalací kompatibilního nastavení s touto verzí %s dojde " +"k vytvoření zálohy současné konfigurace." + +msgid "" +"This version of Slic3r may not understand configurations produced by newest " +"Slic3r versions. For example, newer Slic3r may extend the list of supported " +"firmware flavors. One may decide to bail out or to substitute an unknown " +"value with a default silently or verbosely." +msgstr "" +"Tato verze Slic3r nemusí rozumět konfiguracím vytvořeným nejnovějšími verzemi " +"Slic3r. Například novější Slic3r může rozšířit seznam podporovaných variant " +"firmwaru. Člověk se může rozhodnout vykoupit nebo nahradit neznámou hodnotu " +"výchozím potichu nebo podrobně." msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" -"Aplikuje gamma korekci na rastrové 2D polygony. Hodnota nula znamená " -"nastavení prahové hodnoty doprostřed. Toto chování eliminuje antialiasing " -"bez ztráty otvorů v polygonech." +"Aplikuje gamma korekci na rastrové 2D polygony. Hodnota nula znamená nastavení " +"prahové hodnoty doprostřed. Toto chování eliminuje antialiasing bez ztráty otvorů v " +"polygonech." msgid "Threads" msgstr "Vlákna" @@ -8473,8 +12103,29 @@ msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" -"Vlákna jsou používána pro paralelizaci časově náročnějších úloh. Optimální " -"počet vláken je mírně nad počtem dostupných jader/procesorů." +"Vlákna jsou používána pro paralelizaci časově náročnějších úloh. Optimální počet " +"vláken je mírně nad počtem dostupných jader/procesorů." + +msgid "Threshold" +msgstr "Prahová hodnota" + +msgid "threshold for" +msgstr "Prahová hodnota pro" + +msgid "Threshold:" +msgstr "Prahová hodnota:" + +msgid "Thumbnail color" +msgstr "Barva miniatury" + +msgid "Thumbnail options" +msgstr "Možnosti miniatur" + +msgid "Thumbnails" +msgstr "Miniatury" + +msgid "Thumbnails size" +msgstr "Velikost náhledů" msgid "Tilt" msgstr "Náklon" @@ -8485,14 +12136,20 @@ msgstr "Doba náklonu" msgid "Time" msgstr "Čas" +msgid "time" +msgstr "Čas" + +msgid "Time estimation compensation" +msgstr "Kompenzace podle časového odhadu" + msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" -"Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí " -"nový filament během jeho výměny (při provádění kódu T). Tento čas je přidán " -"k celkové době tisku pomocí G-code odhadovače tiskového času." +"Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) zavádí nový " +"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k celkové " +"době tisku pomocí G-code odhadovače tiskového času." msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " @@ -8500,8 +12157,8 @@ msgid "" "added to the total print time by the G-code time estimator." msgstr "" "Doba, po kterou firmware tiskárny (nebo jednotka Multi Material 2.0) vysouvá " -"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k " -"celkové době tisku pomocí G-code odhadovače tiskového času." +"filament během jeho výměny (při provádění kódu T). Tento čas je přidán k celkové " +"době tisku pomocí G-code odhadovače tiskového času." msgid "Time of the fast tilt" msgstr "Doba trvání rychlého náklonu" @@ -8514,16 +12171,36 @@ msgid "" "toolchanges with flexible materials that may need more time to shrink to " "original dimensions. " msgstr "" -"Doba čekání po vysunutí filamentu. Může pomoci ke spolehlivé změně extruderu " -"s flexibilními materiály, které potřebují více času ke smrštění na původní " -"rozměry. " +"Doba čekání po vysunutí filamentu. Může pomoci ke spolehlivé změně extruderu s " +"flexibilními materiály, které potřebují více času ke smrštění na původní rozměry. " msgid "to" -msgstr "do" +msgstr "na" + +msgid "" +"To avoid visible seam, the extrusion can be stoppped a bit before the end of " +"the loop.\n" +"Can be a mm or a % of the current extruder diameter." +msgstr "" +"Aby se zabránilo viditelnému švu, lze vytlačování zastavit chvíli před koncem " +"smyčky.\n" +"Může být mm nebo % z aktuálního průměru extrudéru." msgid "To do that please specify a new name for the preset." +msgstr "Chcete-li akci provést, prosím nejdříve zadejte nový název přednastavení." + +msgid "" +"To further reduce stringing, it can be helpful to set a lower temperature " +"just prior to extracting filament from the hotend." msgstr "" -"Chcete-li akci provést, prosím nejdříve zadejte nový název přednastavení." +"Pro další snížení navlékání může být užitečné nastavit nižší teplotu těsně před " +"vyjmutím vlákna z hotendu." + +msgid "To objects" +msgstr "Na objekty" + +msgid "To parts" +msgstr "Na části" msgid "" "To specify the system certificate store manually, please set the %1% " @@ -8536,8 +12213,8 @@ msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" -"Chcete-li použít vlastní soubor CA, importujte soubor CA do Certificate " -"Store / Keychain." +"Chcete-li použít vlastní soubor CA, importujte soubor CA do Certificate Store / " +"Keychain." msgid "Toggle %c axis mirroring" msgstr "Přepnout zrcadlení podle osy %c" @@ -8555,7 +12232,7 @@ msgid "Tool #" msgstr "Nástroj #" msgid "Tool change G-code" -msgstr "G-code pro výměnu nástroje" +msgstr "G-Code pro výměnu nástroje" msgid "Tool changes" msgstr "Výměny nástroje" @@ -8563,35 +12240,77 @@ msgstr "Výměny nástroje" msgid "Tool marker" msgstr "Vizualizace nástroje" +msgid "Tool name" +msgstr "Název nástroje" + +msgid "Tool offset" +msgstr "Odsazení nástroje" + msgid "Tool position" msgstr "Poloha nástroje" -msgid "Tool type" -msgstr "Typ nástroje" +msgid "Tool z lift" +msgstr "Tool z lift" + +msgid "Tool z offset" +msgstr "Odsazení nástroje z" + +msgid "Tool/C" +msgstr "Nástroj/C" msgid "Toolchange parameters with single extruder MM printers" msgstr "Parametry při výměně (Multi Material s jedním extruderem)" +msgid "Toolchange part fan speed" +msgstr "Rychlost ventilátoru dílu pro výměnu nástrojů" + +msgid "Toolchange temperature" +msgstr "Teplota při výměně nástroje" + +msgid "Toolchange temperature enabled" +msgstr "Teplota výměny nástrojů povolena" + msgid "Top" -msgstr "Vrchních" +msgstr "Vrchní" msgid "" "Top / bottom shell thickness hint: Not available due to invalid layer height." msgstr "" -"Nápověda pro tloušťku vrchní / spodní skořepiny: Není k dipozici z důvodu " -"neplatné výšky vrstvy." +"Nápověda pro tloušťku vrchní / spodní skořepiny: Není k dipozici z důvodu neplatné " +"výšky vrstvy." -msgid "Top interface layers" -msgstr "Vrchní kontaktní vrstvy" +msgid "Top fan speed" +msgstr "Nejvyšší rychlost ventilátoru" + +msgid "Top fill" +msgstr "Vrchní výplň" + +msgid "Top fill flow ratio" +msgstr "Poměr průtoku vrchní výplně" + +msgid "Top flow calibration" +msgstr "Kalibrace horního průtoku" + +msgid "top infill" +msgstr "Vrchní výplň" msgid "Top is open." -msgstr "Horní část je otevřená." +msgstr "Vrchní část je otevřená." + +msgid "Top layers" +msgstr "Vrchní vrstvy" + +msgid "Top Pattern" +msgstr "Horní vzor" msgid "Top shell is %1% mm thick for layer height %2% mm." msgstr "Tloušťka vrchní skořepiny je %1% mm při výšce vrstvy %2% mm." +msgid "Top solid" +msgstr "Vrchní plná" + msgid "Top solid infill" -msgstr "Vrchní plné výplně" +msgstr "Vrchní plná výplň" msgid "top solid infill" msgstr "vrchní plná výplň" @@ -8599,21 +12318,24 @@ msgstr "vrchní plná výplň" msgid "Top solid layers" msgstr "Vrchních plných vrstev" +msgid "Top solid spacing" +msgstr "Vrchní pevná mezera" + +msgid "Top solid speed" +msgstr "Nejvyšší plná rychlost" + msgid "Top View" msgstr "Pohled svrchu" msgid "Topmost surface only" msgstr "Pouze nejvrchnější vrstva" -msgid "Total" -msgstr "Celkem" - msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "" -"Celkový objem čištění je spočítán jako součet dvou hodnot níže v závislosti " -"na tom, které extrudery jsou zavedeny/vyjmuty." +"Celkový objem čištění je spočítán jako součet dvou hodnot níže v závislosti na tom, " +"které extrudery jsou zavedeny/vyjmuty." msgid "Total rammed volume" msgstr "Celkový objem rapidní extruze" @@ -8639,6 +12361,15 @@ msgstr "Translace" msgid "Travel" msgstr "Rychloposun" +msgid "Travel acceleration" +msgstr "Cestovní zrychlení" + +msgid "Travel cost" +msgstr "Cena cesty" + +msgid "Travel speed" +msgstr "Rychloposun" + msgid "Triangles" msgstr "Trojúhelníky" @@ -8646,8 +12377,14 @@ msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" -"Pokuste se opravit nemanifoldní meshe (tato možnost je implicitně přidána " -"vždy, když potřebujeme řezat model)." +"Pokuste se opravit nemanifoldní meshe (tato možnost je implicitně přidána vždy, " +"když potřebujeme řezat model)." + +msgid "Tuning ironing" +msgstr "Ladění ironing" + +msgid "Twisting" +msgstr "Kroucení" msgid "Type" msgstr "Typ" @@ -8661,9 +12398,6 @@ msgstr "Typ tiskárny." msgid "Type:" msgstr "Typ:" -msgid "Unable to drill the current configuration of holes into the model." -msgstr "Nelze vyvrtat aktuální konfiguraci otvorů do modelu." - msgid "" "Unable to load the following shaders:\n" "%s" @@ -8674,45 +12408,23 @@ msgstr "" msgid "Unable to reload:" msgstr "Nelze znovu načíst:" -msgid "Unable to replace with more than one volume" -msgstr "Nelze nahradit více než jednou částí" - msgid "Undef" msgstr "Nedefinováno" -msgid "Undef category" -msgstr "Nedefinovaná kategorie" - -msgid "Undef group" -msgstr "Nedefinovaná skupina" - msgid "Undefined" msgstr "Nedefinováno" msgid "undefined error" msgstr "nedefinovaná chyba" -msgid "Underflow" -msgstr "Podtečení" - msgid "Undo" msgstr "Zpět" msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" -msgstr[0] "%1$d Akce Zpět" -msgstr[1] "%1$d Akce Zpět" -msgstr[2] "%1$d Akcí Zpět" -msgstr[3] "%1$d Akcí Zpět" - -msgid "Undo / Redo is processing" -msgstr "Zpět / Vpřed se zpracovává" - -msgid "Undo desktop integration failed." -msgstr "Zrušení integrace do systému se nepodařilo." - -msgid "Undo desktop integration was successful." -msgstr "Zrušení integrace do systému proběhlo úspěšně." +msgstr[0] "Zpět %1$d Akce" +msgstr[1] "Zpět %1$d Akce" +msgstr[2] "Zpět %1$d Akcí" msgid "Undo History" msgstr "Historie operací Zpět" @@ -8747,23 +12459,19 @@ msgid "" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" -"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že některá nastavení byla změněna a nejsou " -"shodná se systémovými (výchozími) hodnotami pro danou skupinu nastavení. " -"Klikněte pro reset všech nastavení aktuální skupiny nastavení na systémové " -"hodnoty." +"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že některá nastavení byla změněna a nejsou shodná " +"se systémovými (výchozími) hodnotami pro danou skupinu nastavení. Klikněte pro " +"reset všech nastavení aktuální skupiny nastavení na systémové hodnoty." msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" -"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že se hodnota změnila a není shodná se " -"systémovou (nebo výchozí) hodnotou.\n" +"Ikona ODEMKNUTÉHO ZÁMKU indikuje, že se hodnota změnila a není shodná se systémovou " +"(nebo výchozí) hodnotou.\n" "Klikněte pro reset současné hodnoty na systémovou hodnotu." -msgid "Unsaved Changes" -msgstr "Neuložené změny" - msgid "Unselect gizmo or clear selection" msgstr "Zrušit gizmo nebo zrušit výběr" @@ -8788,9 +12496,6 @@ msgstr "Nepodporovaná verze OpenGL" msgid "Unsupported selection" msgstr "Nepodporovaný výběr" -msgid "Untitled" -msgstr "Bez názvu" - msgid "up to" msgstr "až do" @@ -8807,30 +12512,15 @@ msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "" -"Aktualizace nejsou nikdy nainstalovány bez vědomí uživatele a nikdy " -"nepřepíšou upravená uživatelská nastavení." - -msgid "Updating" -msgstr "Probíhá aktualizace" +"Aktualizace nejsou nikdy nainstalovány bez vědomí uživatele a nikdy nepřepíšou " +"upravená uživatelská nastavení." msgid "Upgrade" msgstr "Aktualizovat" -msgid "Upload" -msgstr "Nahrát" - msgid "Upload a firmware image into an Arduino based printer" msgstr "Nahrát firmware do tiskárny s Arduinem" -msgid "Upload and Print" -msgstr "Nahrát a Tisknout" - -msgid "Upload and Simulate" -msgstr "Nahrát a simulovat" - -msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "Název nahrávaného souboru nekončí \"%s\". Chcete pokračovat?" - msgid "Upload not enabled on FlashAir card." msgstr "Na kartě FlashAir není nahrávání povoleno." @@ -8840,22 +12530,30 @@ msgstr "Nahrát soubor do tiskového serveru se jménem:" msgid "Uploading" msgstr "Nahrávání" +msgid "Upper layer" +msgstr "Horní vrstva" + +msgid "Upper Layer" +msgstr "Vyšší vrstva" + msgid "" -"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " -"close all holes in the model." +"Use a solid layer instead of a raft for the layer that touches the build " +"plate." msgstr "" -"Pro modely letadel 3DLabPrint použijte \"Paritní vyplňování\". Použijte " -"\"Uzavírání děr\" pro uzavření všech otvorů v modelu." +"Pro vrstvu, která se dotýká stavební desky, použijte pevnou vrstvu místo voru." + +msgid "Use also for time estimate" +msgstr "Použít také pro odhad času" msgid "Use another extruder" msgstr "Použít jiný extruder" -msgid "Use colors for axes values in Manipulation panel" -msgstr "Podbarvení hodnot os v panelu Manipulace s objektem" - msgid "Use custom size for toolbar icons" msgstr "Použít vlastní velikost ikon na panelu nástrojů" +msgid "Use custom tooltip" +msgstr "Použít vlastní popisek" + msgid "Use environment map" msgstr "Použít mapu prostředí" @@ -8874,9 +12572,29 @@ msgstr "Scéna v režimu „free camera“" msgid "Use inches" msgstr "Používat palce" +msgid "Use only as safeguards" +msgstr "Používejte pouze jako ochranu" + +msgid "" +"Use only one perimeter on first layer, to give more space to the top infill " +"pattern." +msgstr "" +"Použijte pouze jeden perimetr na první vrstvě, abyste poskytli více prostoru " +"hornímu vzoru výplně." + +msgid "" +"Use only one perimeter on flat top surface, to give more space to the top " +"infill pattern." +msgstr "" +"Používejte pouze jeden perimetr na plochém horním povrchu, abyste poskytli více " +"prostoru hornímu vzoru výplně." + msgid "Use pad" msgstr "Použít podložku" +msgid "Use part fan to cool hotend" +msgstr "K chlazení hotendu použijte ventilátor" + msgid "Use perspective camera" msgstr "Perspektivní zobrazení scény" @@ -8886,8 +12604,12 @@ msgstr "Použít relativní E vzdálenosti" msgid "Use Retina resolution for the 3D scene" msgstr "Pro 3D scénu použít rozlišení Retina" -msgid "Use system menu for application" -msgstr "V PrusaSliceru používat systémové nabídky" +msgid "" +"Use this option to set the axis letter associated with your printer's " +"extruder (usually E but some printers use A)." +msgstr "" +"Tuto volbu použijte k nastavení písmene osy spojeného s extruderem vaší tiskárny " +"(obvykle E, ale některé tiskárny používají A)." msgid "" "Use this setting to rotate the support material pattern on the horizontal " @@ -8895,14 +12617,11 @@ msgid "" msgstr "Toto nastavení použijte pro horizontální otočení vzoru." msgid "Use volumetric E" -msgstr "Použít volumetrickou hodnotu E" +msgstr "Použít objemovou hodnotu E" msgid "used" msgstr "použitý" -msgid "Used filament" -msgstr "Použito filamentu" - msgid "Used Filament (g)" msgstr "Použito Filamentu (g)" @@ -8930,18 +12649,28 @@ msgstr "Uživatel" msgid "User presets" msgstr "Uživatelská přednastavení" +msgid "usually not necessary to change this" +msgstr "obvykle to není nutné měnit" + msgid "validation failed" msgstr "validace selhala" +msgid "Value is the same as the last saved preset, but is not the system value" +msgstr "" +"Hodnota je stejná jako poslední uložená předvolba, ale není systémovou hodnotou" + msgid "Value is the same as the system value" msgstr "Hodnota je shodná se systémovou hodnotou" +msgid "Value isn't taken into account, it's computed over an other field." +msgstr "Hodnota se nebere v úvahu, počítá se přes jiné pole." + msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "" -"Hodnota byla změněna a není shodná se systémovou hodnotou nebo naposled " -"uloženým přednastavením" +"Hodnota byla změněna a není shodná se systémovou hodnotou nebo naposled uloženým " +"přednastavením" msgid "Values in this column are for Normal mode" msgstr "Hodnoty v tomto sloupci jsou pro Normální režim" @@ -8968,7 +12697,7 @@ msgid "variants" msgstr "varianty" msgid "vendor" -msgstr "výrobce" +msgstr "Výrobce" msgid "Vendor:" msgstr "Výrobce:" @@ -8982,6 +12711,12 @@ msgstr "Verze" msgid "version" msgstr "verze" +msgid "vertical" +msgstr "svislé" + +msgid "Vertical Hole shrinking compensation" +msgstr "Kompenzace zmenšování vertikální díry" + msgid "Vertical shells" msgstr "Svislé stěny" @@ -8994,6 +12729,21 @@ msgstr "Vertikální posuvník - Pohyb aktivním ukazatelem dolů" msgid "Vertical slider - Move active thumb Up" msgstr "Vertikální posuvník - Pohyb aktivním ukazatelem nahoru" +msgid "Very dark color, in the RGB hex format." +msgstr "Velmi tmavá barva, v hexadecimálním formátu RGB." + +msgid "Very dark gui color" +msgstr "Velmi tmavá barva gui" + +msgid "Very light color, in the RGB hex format." +msgstr "Velmi světlá barva, v hexadecimálním formátu RGB." + +msgid "Very light gui color" +msgstr "Velmi světlá barva gui" + +msgid "Very short layer time - began to decrease extrusion rate" +msgstr "Velmi krátká doba vrstvy - začít snižovat rychlost extruze" + msgid "View" msgstr "Zobrazení" @@ -9016,6 +12766,9 @@ msgstr "Vizualizuje již naslicovaný a uložený G-code" msgid "Visualizing supports" msgstr "Vizualizace podpěr" +msgid "Vol. flow" +msgstr "Obj. průtok" + msgid "Volume" msgstr "Objem" @@ -9026,7 +12779,7 @@ msgid "Volumes in Object reordered" msgstr "Změna pořadí Těles v Objektu" msgid "Volumetric" -msgstr "Volumetrický" +msgstr "Objemový" msgid "Volumetric flow hints not available" msgstr "Doporučení pro objemový průtok nejsou k dispozici" @@ -9040,6 +12793,19 @@ msgstr "Objemový průtok (mm³/s)" msgid "Volumetric speed" msgstr "Objemová rychlost" +msgid "Volumetric speed for Autospeed" +msgstr "Objemová rychlost pro Automatickou rychlost" + +msgid "Voron Cube" +msgstr "Voronova kostka" + +msgid "" +"Voron cubic cube with many features inside, with a bearing slot on top. " +"Better to check dimensional accuracy." +msgstr "" +"Voronská krychlová kostka s mnoha prvky uvnitř, s ložiskovou drážkou nahoře. Lepší " +"kontrolovat rozměrovou přesnost." + msgid "Wall thickness" msgstr "Tloušťka stěny" @@ -9058,9 +12824,39 @@ msgstr "Vítejte v %s Konfiguračním Asistentu" msgid "Welcome to the %s Configuration Wizard" msgstr "Vítejte v %s Konfiguračním průvodci" +msgid "" +"What to do with the result? insert it into the existing plater or replacing " +"the current plater by a new one?" +msgstr "" +"Co dělat s výsledkem? vložit jej do stávajícího talíře nebo vyměnit stávající talíř " +"za nový?" + msgid "What would you like to do with \"%1%\" preset after saving?" msgstr "Co chcete udělat s přednastavením \"%1%\" po uložení?" +msgid "" +"When an extruder travels to an object (from the start position or from an " +"object to another), the nozzle height is guaranteed to be at least at this " +"value.\n" +"It's made to ensure the nozzle won't hit clips or things you have on your " +"bed. But be careful to not put a clip in the 'convex shape' of an object.\n" +"Set to 0 to disable." +msgstr "" +"Když extruder cestuje k objektu (z výchozí pozice nebo z objektu do jiného), je " +"zaručeno, že výška trysky bude alespoň na této hodnotě.\n" +"Je vyrobena tak, aby zajistila, že tryska nenarazí do klipů nebo věcí, které máte " +"na posteli. Dejte si ale pozor, abyste klip nevložili do 'konvexního tvaru' " +"předmětu.\"\n" +"Nastavte na 0 pro zakázání." + +msgid "" +"When an object is sliced, it will switch your view from the curent view to " +"the preview (and then gcode-preview) automatically, depending on the option " +"choosen." +msgstr "" +"Když je objekt rozřezán, přepne váš pohled z aktuálního pohledu na náhled (a poté " +"gcode-preview) automaticky, v závislosti na zvolené možnosti." + msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" @@ -9073,16 +12869,39 @@ msgid "" "application, shows a dialog asking to select the action to take on the file " "to load." msgstr "" -"Je-li zaškrtnuto, při každém přetažení souboru s projektem do aplikace se " -"zobrazí dialogové okno s výzvou k výběru akce, kterou se má soubor načíst." +"Je-li zaškrtnuto, při každém přetažení souboru s projektem do aplikace se zobrazí " +"dialogové okno s výzvou k výběru akce, kterou se má soubor načíst." + +msgid "When closing the application, always ask for unsaved changes" +msgstr "Při zavírání aplikace vždy ptát na neuložené změny" + +msgid "" +"when printing %s with a volumetric rate of %3.2f mm³/s at filament speed " +"%3.2f mm/s." +msgstr "" +"při tisku %s objemovou rychlostí %3.2f mm³/s při rychlosti vlákna %3.2f mm/s." msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" -"Připnutí překrývajících se objektů jeden k druhému při Multimateriálovém " -"tisku. (Druhá část se připne k první, třetí část k první a druhé, atd.)" +"Připnutí překrývajících se objektů jeden k druhému při Multimateriálovém tisku. " +"(Druhá část se připne k první, třetí část k první a druhé, atd.)" + +msgid "" +"When printing multiple objects or copies on after another, this will help " +"you to choose how it's ordered.\n" +"Object will sort them by the order of the right panel.\n" +"Lowest Y will sort them by their lowest Y point. Useful for printers with a " +"X-bar.\n" +"Lowest Z will sort them by their height, useful for delta printers." +msgstr "" +"Když tisknete více objektů nebo kopií po sobě, pomůže vám to vybrat, jak to bude " +"uspořádáno.\n" +"Objekt je seřadí podle pořadí na pravém panelu.\n" +"Nejnižší Y je seřadí podle nejnižšího bodu Y. Užitečné pro tiskárny s X-bar.\n" +"Nejnižší Z je seřadí podle jejich výšky, což je užitečné pro delta tiskárny." msgid "" "When printing multiple objects or copies, this feature will complete each " @@ -9090,19 +12909,57 @@ msgid "" "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" -"Při tisku více objektů nebo kopií tiskárna kompletně dokončí jeden objekt, " -"předtím než začne tisknout druhý (začíná od spodní vrstvy). Tato vlastnost " -"je výhodná z důvodů snížení rizika zničených výtisků. Slic3r by měl varovat " -"při možné kolizi extruderu s objektem a zabránit mu, přesto doporučujeme " -"obezřetnost." +"Při tisku více objektů nebo kopií tiskárna kompletně dokončí jeden objekt, předtím " +"než začne tisknout druhý (začíná od spodní vrstvy). Tato vlastnost je výhodná z " +"důvodů snížení rizika zničených výtisků. Slic3r by měl varovat při možné kolizi " +"extruderu s objektem a zabránit mu, přesto doporučujeme obezřetnost." + +msgid "" +"When printing with very low layer heights, you might still want to print a " +"thicker bottom layer to improve adhesion and tolerance for non perfect build " +"plates. This can be expressed as an absolute value or as a percentage (for " +"example: 75%) over the lowest nozzle diameter used in by the object." +msgstr "" +"Při tisku s velmi malými výškami vrstev můžete přesto chtít tisknout silnější " +"spodní vrstvu, abyste zlepšili přilnavost a toleranci pro nedokonalé stavební " +"desky. To lze vyjádřit jako absolutní hodnotu nebo jako procento (například: 75 %) " +"nad nejnižší průměr trysky používaný objektem." + +msgid "" +"When retraction is triggered before changing tool, filament is pulled back " +"by the specified amount (the length is measured on raw filament, before it " +"enters the extruder).\n" +"Note: This value will be unretracted when this extruder will load the next " +"time." +msgstr "" +"Když se před výměnou nástroje spustí zatahování, vlákno se vytáhne zpět o zadanou " +"hodnotu (délka se měří na surovém vláknu, než vstoupí do extrudéru).\n" +"Poznámka: Tato hodnota bude zrušena, když se tento extruder načte příště." msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" -"Při spuštění retrakce se filament zatáhne zpět o zadané množství (délka se " -"měří na surovém filamentu, než vstoupí do extruderu)." +"Při spuštění retrakce se filament zatáhne zpět o zadané množství (délka se měří na " +"surovém filamentu, než vstoupí do extruderu)." + +msgid "" +"When set to a non-zero value this fan speed is used only for external " +"perimeters (visible ones). \n" +"Set to 1 to disable the fan.\n" +"Set to -1 to use the normal fan speed on external perimeters.External " +"perimeters can benefit from higher fan speed to improve surface finish, " +"while internal perimeters, infill, etc. benefit from lower fan speed to " +"improve layer adhesion." +msgstr "" +"Při nastavení na nenulovou hodnotu se tato rychlost ventilátoru používá pouze pro " +"vnější perimetry (viditelné). \n" +"Nastavením na 1 deaktivujete ventilátor.\n" +"Nastavte na -1 pro použití normální rychlosti ventilátoru na vnějších perimetrech. " +"Externí perimetry mohou těžit z vyšší rychlosti ventilátoru pro zlepšení povrchové " +"úpravy, zatímco vnitřní perimetry, výplň atd. těží z nižší rychlosti ventilátoru " +"pro zlepšení adheze vrstvy." msgid "" "When set to zero, the distance the filament is moved from parking position " @@ -9110,10 +12967,37 @@ msgid "" "positive, it is loaded further, if negative, the loading move is shorter " "than unloading. " msgstr "" -"Když je hodnota nastavena na nulu, vzdálenost o kterou se filament posune " -"během zavádění, je stejná, jako zpětný posun během vysouvání filamentu. Je-" -"li hodnota kladná, je filament posunut více,. Je-li hodnota záporná, posun " -"při zavádění je kratší než při vysouvání. " +"Když je hodnota nastavena na nulu, vzdálenost o kterou se filament posune během " +"zavádění, je stejná, jako zpětný posun během vysouvání filamentu. Je-li hodnota " +"kladná, je filament posunut více,. Je-li hodnota záporná, posun při zavádění je " +"kratší než při vysouvání. " + +msgid "" +"When setting other speed settings to 0, Slic3r will autocalculate the " +"optimal speed in order to keep constant extruder pressure. This experimental " +"setting is used to set the highest print speed you want to allow." +msgstr "" +"Při nastavení dalších nastavení rychlosti na 0 Slic3r automaticky vypočítá " +"optimální rychlost, aby byl zachován konstantní tlak extrudéru. Toto experimentální " +"nastavení se používá k nastavení nejvyšší rychlosti tisku, kterou chcete povolit." + +msgid "" +"When the external perimeter loop extrusion ends, a wipe is done, going " +"slightly inside the print. The number in this settting increases the wipe by " +"moving the nozzle along the loop again before the final wipe." +msgstr "" +"Když vysunutí vnější perimetrové smyčky skončí, provede se setření, mírně dovnitř " +"tisku. Číslo v tomto nastavení zvýší setření tím, že před posledním setřením znovu " +"posunete trysku podél smyčky." + +msgid "" +"When the retraction is compensated after changing tool, the extruder will " +"push this additional amount of filament (but not on the first extruder after " +"start, as it should already be loaded)." +msgstr "" +"Když je zatažení kompenzováno po výměně nástroje, extrudér zatlačí toto dodatečné " +"množství vlákna (ale ne na první extrudér po spuštění, protože by již měl být " +"nabitý)." msgid "" "When the retraction is compensated after the travel move, the extruder will " @@ -9122,12 +13006,37 @@ msgstr "" "Když je retrakce kompenzována po rychloposunu, extruder vytlačuje toto další " "množství filamentu. Toto nastavení je zřídkakdy potřeba." +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the brim at the beginning of each object. if you prefer to have more place " +"for you objects, you can print all the brims at the beginning, so ther is " +"less problem with collision." +msgstr "" +"Při použití Dokončení jednotlivých objektů je výchozím chováním nakreslit okraj na " +"začátek každého objektu. Pokud chcete mít pro své objekty více místa, můžete " +"vytisknout všechny okraje na začátku, takže je méně problémů s kolizí." + +msgid "" +"When using 'Complete individual objects', the default behavior is to draw " +"the skirt around each object. if you prefer to have only one skirt for the " +"whole platter, use this option." +msgstr "" +"Při použití 'Dokončení jednotlivých objektů' je výchozím chováním nakreslit sukni " +"kolem každého objektu. Pokud dáváte přednost pouze jedné sukni pro celý talíř, " +"použijte tuto možnost." + +msgid "" +"When you create a new project, it will keep the current preset state, and " +"won't open the preset change dialog." +msgstr "" +"Když vytvoříte nový projekt, zachová aktuální přednastavený stav a neotevře " +"dialogové okno pro změnu přednastavení." + msgid "WHITE BULLET" msgstr "BÍLÁ TEČKA" msgid "WHITE BULLET icon indicates a non system (or non default) preset." -msgstr "" -"Ikona BÍLÉ TEČKY indikuje nesystémové (nebo jiné než výchozí) přednastavení." +msgstr "Ikona BÍLÉ TEČKY indikuje nesystémové (nebo jiné než výchozí) přednastavení." msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " @@ -9140,15 +13049,17 @@ msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "" -"Ikona BÍLÉ TEČKY indikuje, že je hodnota shodná s naposledy uloženým " -"přednastavením." - -msgid "Whole word" -msgstr "Celé slovo" +"Ikona BÍLÉ TEČKY indikuje, že je hodnota shodná s naposledy uloženým přednastavením." msgid "Width" msgstr "Šířka" +msgid "width" +msgstr "Šířka" + +msgid "Width & Flow" +msgstr "Šířka a průtok" + msgid "Width (mm)" msgstr "Šířka (mm)" @@ -9158,6 +13069,13 @@ msgstr "Šířka od středu zadní koule ke středu přední koule" msgid "Width of a wipe tower" msgstr "Šířka čistící věže" +msgid "" +"Width of the brim for the wipe tower. Can be in mm or in % of the (assumed) " +"only one nozzle diameter." +msgstr "" +"Šířka okraje pro stírací věž. Může být v mm nebo v % z (předpokládaného) průměru " +"pouze jedné trysky." + msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "Šířka spojek, které spojují objekt s vygenerovanou podložkou." @@ -9165,22 +13083,40 @@ msgstr "Šířka spojek, které spojují objekt s vygenerovanou podložkou." msgid "Width of the display" msgstr "Šířka displeje" +msgid "width&spacing combo" +msgstr "Vzdálenost" + +msgid "will be turned off by default." +msgstr "bude ve výchozím nastavení vypnuto." + msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "" -"Vytvoří offset každé vrstvy v rovině XY. Kladná hodnota - offset směrem ven, " -"plocha polygonu se zvětší. Záporná hodnota - offset směrem dovnitř, plocha " -"polygonu se zmenší." +"Vytvoří offset každé vrstvy v rovině XY. Kladná hodnota - offset směrem ven, plocha " +"polygonu se zvětší. Záporná hodnota - offset směrem dovnitř, plocha polygonu se " +"zmenší." + +msgid "Will only take into account the delay for the cooling of overhangs." +msgstr "Bude zohledňovat pouze zpoždění chlazení převisů." + +msgid "will run at %1%%% by default" +msgstr "ve výchozím nastavení poběží na %1%%%" msgid "Wipe" msgstr "Čištění" msgid "Wipe into this object" -msgstr "Vyčistit do tohoto objektu" +msgstr "Očistit do tohoto objektu" msgid "Wipe into this object's infill" -msgstr "Vyčištění do výplně tohoto objektu" +msgstr "Očistit do výplně tohoto objektu" + +msgid "Wipe only when crossing perimeters" +msgstr "Očistit pouze při překračování perimetrů" + +msgid "Wipe speed" +msgstr "Rychlost očištění" msgid "Wipe Tower" msgstr "Čistící Věž" @@ -9200,12 +13136,24 @@ msgstr "Šířka límce čistící věže" msgid "Wipe tower parameters" msgstr "Parametry čistící věže" +msgid "Wipe tower position" +msgstr "Pozice čistící věže" + msgid "Wipe tower rotation angle" msgstr "Úhel natočení čistící věže" msgid "Wipe tower rotation angle with respect to x-axis." msgstr "Úhel natočení čistící věže s ohledem na osu X." +msgid "Wipe tower Width" +msgstr "Čistící věž Šířka" + +msgid "Wipe tower X" +msgstr "Čistící věž X" + +msgid "Wipe tower Y" +msgstr "Čistící věž Y" + msgid "Wipe while retracting" msgstr "Očistit při retrakci" @@ -9213,23 +13161,8 @@ msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "" -"U bowdenových extrudérů může být vhodné provést rychlé retrakce než se " -"spustí očištění." - -msgid "" -"With draft shield active, the skirt will be printed skirt_distance from the " -"object, possibly intersecting brim.\n" -"Enabled = skirt is as tall as the highest printed object.\n" -"Limited = skirt is as tall as specified by skirt_height.\n" -"This is useful to protect an ABS or ASA print from warping and detaching " -"from print bed due to wind draft." -msgstr "" -"Při ochranném štítu proti průvanu se obrys vytiskne ve vzdálenosti " -"skirt_distance od objektu, případně protíná límec.\n" -"Povoleno = obrys je stejně vysoký jako nejvyšší tištěný objekt.\n" -"Omezeno = obrys je tak vysoký, jak určuje výška skirt_height.\n" -"To je užitečné pro ochranu modelu z ABS nebo ASA před deformací a odlepením " -"od tiskové podložky v důsledku průvanu." +"U bowdenových extruderů může být vhodné provést rychlé retrakce než se spustí " +"očištění." msgid "With sheath around the support" msgstr "Pouzdro okolo podpěr" @@ -9247,8 +13180,8 @@ msgid "" msgstr "" "Přejete si spustit instalaci?\n" "\n" -"Nejprve bude provedena kompletní záloha nastavení. V případě problémů s " -"novou verzí ji bude možné kdykoliv obnovit.\n" +"Nejprve bude provedena kompletní záloha nastavení. V případě problémů s novou verzí " +"ji bude možné kdykoliv obnovit.\n" "\n" "Aktualizované balíčky nastavení:" @@ -9264,6 +13197,27 @@ msgstr "Chybné heslo" msgid "X coordinate of the left front corner of a wipe tower" msgstr "X souřadnice levého předního rohu čistící věže" +msgid "xy" +msgstr "xy" + +msgid "XY" +msgstr "XY" + +msgid "XY compensation" +msgstr "XY Kompenzace" + +msgid "XY First layer compensation" +msgstr "XY Kompenzace první vrstvy" + +msgid "XY First layer compensation height in layers" +msgstr "XY Výška kompenzace první vrstvy ve vrstvách" + +msgid "XY holes compensation" +msgstr "Kompenzace XY děr" + +msgid "XY holes threshold" +msgstr "Práh XY děr" + msgid "XY separation between an object and its support" msgstr "XY vzdálenost mezi objektem a podpěrami" @@ -9271,32 +13225,110 @@ msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" -"XY vzdálenost mezi objektem a podpěrami. Pokud je vyjádřeno procenty " -"(například 50%), bude vypočítána z šířky perimetru." +"XY vzdálenost mezi objektem a podpěrami. Pokud je vyjádřeno procenty (například " +"50%), bude vypočítána z šířky perimetru." + +msgid "xyz decimals" +msgstr "XYZ desetinná místa" msgid "Y coordinate of the left front corner of a wipe tower" msgstr "Y souřadnice levého předního rohu čistící věže" -msgid "" -"You are currently editing SLA support points. Please, apply or discard your " -"changes first." -msgstr "" -"Právě upravujete SLA podpěrné body. Změny nejprve aplikujte nebo zahoďte." - -msgid "You are opening %1% version %2%." -msgstr "Otevíráte %1% verze %2%." - -msgid "You can keep presets modifications to the new project or discard them" -msgstr "Úpravy přednastavení můžete v novém projektu ponechat nebo je zahodit" +msgid "Yes" +msgstr "Ano" msgid "" -"You can keep presets modifications to the new project, discard them or save " -"changes as new presets.\n" -"Note, if changes will be saved then new project wouldn't keep them" -msgstr "" -"Změny přednastavení můžete v novém projektu ponechat, zahodit je nebo uložit " -"jako nové přednastavení.\n" -"Pamatuje, že pokud budou změny uloženy, nový projekt je nezachová" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. the variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"Advice: before using a variable, it's safer to use the function " +"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " +"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " +"'string'." +msgstr "" +"Můžete přidat data přístupná pro vlastní makra gcode.\n" +"Každý řádek může definovat jednu proměnnou.\n" +"Formát je 'název_proměnné=hodnota'. Název proměnné by měl mít pouze [a-zA-Z0-9] " +"znaky nebo '_'.\n" +"Hodnota, kterou lze analyzovat jako int nebo float, bude k dispozici jako číselná hodnota.\n" +"Hodnota, která je uzavřena do dvojitých uvozovek, bude k dispozici jako řetězec (bez " +"uvozovky)\n" +"Hodnota, která nabývá pouze hodnot 'true' nebo 'false', bude logická)\n" +"Každá další hodnota bude analyzována jako řetězec tak, jak je.\n" +"Rada: před použitím proměnné je bezpečnější použít funkci" +"'default_XXX(název_proměnné, výchozí_hodnota)' (uzavřeno v závorce, protože se jedná o skript) " +"v případě, že není nastaven. XXX můžete nahradit výrazem 'int' 'bool' 'double' 'řetězec'." + +msgid "" +"You can add data accessible to custom-gcode macros.\n" +"Each line can define one variable.\n" +"The format is 'variable_name=value'. The variable name should only have [a-" +"zA-Z0-9] characters or '_'.\n" +"A value that can be parsed as a int or float will be avaible as a numeric " +"value.\n" +"A value that is enclosed by double-quotes will be available as a string " +"(without the quotes)\n" +"A value that only takes values as 'true' or 'false' will be a boolean)\n" +"Every other value will be parsed as a string as-is.\n" +"These variables will be available as an array in the custom gcode (one item " +"per extruder), don't forget to use them with the {current_extruder} index to " +"get the current value. If a filament has a typo on the variable that change " +"its type, then the parser will convert evrything to strings.\n" +"Advice: before using a variable, it's safer to use the function " +"'default_XXX(variable_name, default_value)' (enclosed in bracket as it's a " +"script) in case it's not set. You can replace XXX by 'int' 'bool' 'double' " +"'string'." +msgstr "" +"Můžete přidat data přístupná pro vlastní makra gcode.\n" +"Každý řádek může definovat jednu proměnnou.\n" +"Formát je 'název_proměnné=hodnota'. Název proměnné by měl mít pouze [a-zA-Z0-9] " +"znaky nebo '_'.\n" +"Hodnota, kterou lze analyzovat jako int nebo float, bude k dispozici jako číselná hodnota.\n" +"Hodnota, která je uzavřena do dvojitých uvozovek, bude k dispozici jako řetězec (bez " +"uvozovky)\n" +"Hodnota, která nabývá pouze hodnot 'true' nebo 'false', bude logická)\n" +"Každá další hodnota bude analyzována jako řetězec tak, jak je.\n" +"Tyto proměnné budou dostupné jako pole ve vlastním gcode (jedna položka na " +"extruder), nezapomeňte je použít s indexem {current_extruder}, abyste získali " +"aktuální hodnota. Pokud má vlákno v proměnné překlep, který mění jeho typ, pak " +"analyzátor převede vše na řetězce.\n" +"Rada: před použitím proměnné je bezpečnější použít funkci" +"'default_XXX(název_proměnné, výchozí_hodnota)' (uzavřeno v závorce, protože se jedná o skript) " +"v případě, že není nastaven. XXX můžete nahradit výrazem 'int' 'bool' 'double' 'řetězec'." + +msgid "" +"You can choose the dimension of the cube. It's a simple scale, you can " +"modify it in the right panel yourself if you prefer. It's just quicker to " +"select it here." +msgstr "" +"Můžete si vybrat rozměr krychle. Je to jednoduché měřítko, pokud chcete, můžete si " +"ho upravit v pravém panelu sami. Jen je rychlejší vybrat ho zde." + +msgid "" +"You can increase this to over-extrude on the first layer if there is not " +"enough plastic because your bed isn't levelled.\n" +"Note: DON'T USE THIS if your only problem is bed levelling, LEVEL YOUR BED! " +"Use this setting only as last resort after all calibrations failed." +msgstr "" +"Pokud není dostatek plastu, protože vaše postel není vyrovnána, můžete to zvýšit " +"tak, aby došlo k nadměrnému vytlačení první vrstvy.\n" +"Poznámka: NEPOUŽÍVEJTE TOTO, pokud je vaším jediným problémem vyrovnání postele, " +"VYROVNĚTE POSTEL! Toto nastavení používejte pouze jako poslední možnost poté, co " +"všechny kalibrace selhaly." + +msgid "" +"You can increase this to over-extrude on the top layer if there is not " +"enough plastic to make a good fill." +msgstr "" +"Můžete to zvýšit, abyste přetlačili horní vrstvu, pokud není dostatek plastu pro " +"vytvoření dobré výplně." msgid "You can open only one .gcode file at a time." msgstr "Najednou můžete otevřít pouze jeden soubor .gcode." @@ -9314,8 +13346,18 @@ msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" -"Nastavením počtu prvních vrstev s vypnutým chlazením pro nezhoršování " -"přilnavosti." +"Nastavením počtu prvních vrstev s vypnutým chlazením pro nezhoršování přilnavosti." + +msgid "" +"You can use all configuration options as variables inside this template. For " +"example: {layer_height}, {fill_density} etc. You can also use {timestamp}, " +"{year}, {month}, {day}, {hour}, {minute}, {second}, {version}, " +"{input_filename}, {input_filename_base}." +msgstr "" +"V této šabloně můžete jako proměnné použít všechny možnosti konfigurace. Například: " +"{layer_height}, {fill_density} atd. Můžete také použít {timestamp}, {year}, " +"{month}, {day}, {hour}, { minute}, {second}, {version}, {input_filename}, " +"{input_filename_base}." msgid "You can't change a type of the last solid part of the object." msgstr "Nelze změnit typ poslední plné části objektu." @@ -9324,18 +13366,15 @@ msgid "" "You can't to add the object(s) from %s because of one or some of them " "is(are) multi-part" msgstr "" -"Nemůžete přidat objekt(y) z %s, protože jeden nebo některé z nich je(jsou) " -"vícedílné" +"Nemůžete přidat objekt(y) z %s, protože jeden nebo některé z nich je(jsou) vícedílné" msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" -"Nelze načíst SLA projekt s objektem na podložce, který je složený z více " -"částí" +"Nelze načíst SLA projekt s objektem na podložce, který je složený z více částí" msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" -msgstr "" -"Nemůžete použít nestejnoměrnou změnu měřítka pro více vybraných objektů/částí" +msgstr "Nemůžete použít nestejnoměrnou změnu měřítka pro více vybraných objektů/částí" msgid "" "You have just added a G-code for color change, but its value is empty.\n" @@ -9356,8 +13395,15 @@ msgstr "" msgid "" "You have the following presets with saved options for \"Print Host upload\"" msgstr "" -"Následující přednastavení máte s uloženým nastavením pro „Nahrávání do " -"tiskového serveru“" +"Následující přednastavení máte s uloženým nastavením pro „Nahrávání do tiskového " +"serveru“" + +msgid "" +"You have unsaved changes, do you want to save your project or to remove all " +"settings and objects?" +msgstr "" +"Máte neuložené změny, chcete uložit svůj projekt nebo odstranit všechna nastavení a " +"objekty?" msgid "You may need to update your graphics card driver." msgstr "Možná budete muset aktualizovat ovladač grafické karty." @@ -9365,43 +13411,33 @@ msgstr "Možná budete muset aktualizovat ovladač grafické karty." msgid "You must install a configuration update." msgstr "Je nutné nainstalovat aktualizaci konfigurace." +msgid "You need to restart %s to make the changes effective." +msgstr "Chcete-li provést změny, musíte restartovat aplikaci %s." + msgid "You should change the name of your printer device." msgstr "Měli byste změnit název tiskového zařízení." msgid "You started your selection with %s Item." msgstr "Začali jste výběr s položkou %s." -msgid "" -"You will be notified about new release after startup acordingly: All = " -"Regular release and alpha / beta releases. Release only = regular release." -msgstr "" -"Po spuštění budete informováni o nové verzi: Všechny = stabilní verze a " -"alfa / beta verze. Pouze stabilní verze = pravidelné stabilní verze." - -msgid "You will not be asked about it again on hyperlinks hovering." -msgstr "Nebudete znovu dotázáni při najetí myší na odkazy." +msgid "You will not be asked about it again on label hovering." +msgstr "Při příštím zavření %s se nebudete ptát na neuložené změny." msgid "" -"You will not be asked about the unsaved changes in presets the next time you " -"create new project" -msgstr "" -"Při příštím vytvoření nového projektu nebudete dotázáni na neuložené změny " -"přednastavení" +"You will not be asked about the unsaved changes the next time you close %s." +msgstr "Při příštím zavření %s se nebudete ptát na neuložené změny." msgid "" -"You will not be asked about the unsaved changes in presets the next time you " -"switch a preset" -msgstr "" -"Při příštím přepnutí přednastavení nebudete dotázáni na neuložené změny " -"přednastavení" +"You will not be asked about the unsaved changes the next time you switch a " +"preset." +msgstr "Při příštím přepnutí přednastavení nebudete dotázáni na neuložené změny." msgid "Your current changes will delete all saved color changes." msgstr "Vaše aktuálně provedené změny odstraní všechny uložené změny barev." msgid "Your current changes will delete all saved extruder (tool) changes." msgstr "" -"Vaše aktuálně provedené změny odstraní všechny uložené změny extruderu " -"(nástroje)." +"Vaše aktuálně provedené změny odstraní všechny uložené změny extruderu (nástroje)." msgid "Your file was repaired." msgstr "Váš soubor byl opraven." @@ -9410,18 +13446,50 @@ msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "" -"Váš objekt se zdá být příliš velký, takže byl automaticky zmenšen, aby se " -"vešel na tiskovou podložku." +"Váš objekt se zdá být příliš velký, takže byl automaticky zmenšen, aby se vešel na " +"tiskovou podložku." msgid "" "Your print is very close to the priming regions. Make sure there is no " "collision." -msgstr "" -"Váš tisk je velmi blízko čistícím oblastem. Zajistěte, aby nedošlo ke kolizi." +msgstr "Váš tisk je velmi blízko čistícím oblastem. Zajistěte, aby nedošlo ke kolizi." + +msgid "Z full step" +msgstr "Z úplný krok" msgid "Z offset" msgstr "Odsazení Z" +msgid "Z Travel" +msgstr "Z cestování" + +msgid "Z travel speed" +msgstr "Rychlost jízdy Z" + +msgid "Z-lift override" +msgstr "Přemostění Z-lift" + +msgid "Z-offset" +msgstr "Z-offset" + +msgid "" +"Zero first layer height is not valid.\n" +"\n" +"The first layer height will be reset to 0.01." +msgstr "" +"Nulová výška první vrstvy není platná.\n" +"\n" +"Výška první vrstvy bude resetována na 0.01." + +msgid "" +"Zero layer height is not valid.\n" +"\n" +"The layer height will be reset to 0.01." +msgstr "" +"Nulová výška vrstvy není platná.\n" +"\n" +"Výška vrstvy bude resetována na 0.01." + msgid "Zig-Zag" msgstr "Zig-Zag" @@ -9434,24 +13502,1783 @@ msgstr "Přiblížit" msgid "Zoom out" msgstr "Oddálit" -msgid "Zoom to Bed" -msgstr "Pohled na tiskovou plochu" +msgid "Zoom to Bed" +msgstr "Pohled na tiskovou plochu" + +msgid "" +"Zoom to selected object\n" +"or all objects in scene, if none selected" +msgstr "" +"Pohled na označený objekt, nebo na všechny objekty ve scéně,\n" +"pokud není vybraný žádný objekt" + +msgid "°C" +msgstr "°C" + +msgid "%1$d backward edge" +msgid_plural "%1$d backward edges" +msgstr[0] "‪%1$d‬ zpětná hrana" +msgstr[1] "‪%1$d‬ zpětných hran" +msgstr[2] "‪%1$d‬ zpětných hran" +msgstr[3] "‪%1$d‬ zpětných hran" + +msgid "%1$d degenerate facet" +msgid_plural "%1$d degenerate facets" +msgstr[0] "%1$d degenerovaná faseta" +msgstr[1] "%1$d degenerované fasety" +msgstr[2] "%1$d degenerované fasety" +msgstr[3] "%1$d degenerovaných faset" + +msgid "%1$d edge fixed" +msgid_plural "%1$d edges fixed" +msgstr[0] "Opraveno ‪%1$d‬ hrana" +msgstr[1] "Opraveno ‪%1$d‬ hran" +msgstr[2] "Opraveno ‪%1$d‬ hran" +msgstr[3] "Opraveno ‪%1$d‬ hran" + +msgid "%1$d facet removed" +msgid_plural "%1$d facets removed" +msgstr[0] "%1$d odstraněna faseta" +msgstr[1] "%1$d odstraněné fasety" +msgstr[2] "%1$d odstraněné fasety" +msgstr[3] "%1$d odstraněných fasetů" + +msgid "%1$d facet reversed" +msgid_plural "%1$d facets reversed" +msgstr[0] "%1$d otočená faseta" +msgstr[1] "%1$d otočené fasety" +msgstr[2] "%1$d otočené fasety" +msgstr[3] "%1$d otočenách faset" + +msgid "%1$d object was loaded with custom seam." +msgid_plural "%1$d objects were loaded with custom seam." +msgstr[0] "%1$d objekt byl načten s vlastním švem." +msgstr[1] "%1$d objekty byly načteny s vlastním švem." +msgstr[2] "%1$d objektů bylo načteno s vlastním švem." +msgstr[3] "%1$d objektů bylo načteno s vlastním švem." + +msgid "%1$d object was loaded with custom supports." +msgid_plural "%1$d objects were loaded with custom supports." +msgstr[0] "%1$d objekt byl načten s vlastními podpěrami." +msgstr[1] "%1$d objekty byly načteny s vlastními podpěrami." +msgstr[2] "%1$d objektů bylo načteno s vlastními podpěrami." +msgstr[3] "%1$d objektů bylo načteno s vlastními podpěrami." + +msgid "%1$d object was loaded with multimaterial painting." +msgid_plural "%1$d objects were loaded with multimaterial painting." +msgstr[0] "%1$d objekt byl načten s multimateriálovým malováním." +msgstr[1] "%1$d objekty byly načteny s multimateriálovým malováním." +msgstr[2] "%1$d objektů bylo načteno s multimateriálovým malováním." +msgstr[3] "%1$d objektů bylo načteno s multimateriálovým malováním." + +msgid "%1$d object was loaded with partial sinking." +msgid_plural "%1$d objects were loaded with partial sinking." +msgstr[0] "%1$d objekt byl načten s částečným potopením pod podložku." +msgstr[1] "%1$d objekty byly načteny s částečným potopením pod podložku." +msgstr[2] "%1$d objektů bylo načteno s částečným potopením pod podložku." +msgstr[3] "%1$d objektů bylo načteno s částečným potopením pod podložku." + +msgid "%1$d object was loaded with variable layer height." +msgid_plural "%1$d objects were loaded with variable layer height." +msgstr[0] "%1$d objekt byl načten s proměnnou výškou vrstvy." +msgstr[1] "%1$d objekty byly načteny s proměnnou výškou vrstvy." +msgstr[2] "%1$d objektů bylo načteno s proměnnou výškou vrstvy." +msgstr[3] "%1$d objektů bylo načteno s proměnnou výškou vrstvy." + +msgid "%1$d open edge" +msgid_plural "%1$d open edges" +msgstr[0] "%1$d otevřená hrana" +msgstr[1] "%1$d otevřené hrany" +msgstr[2] "%1$d otevřených hran" +msgstr[3] "%1$d otevřených hran" + +msgid "%1% (%2$d shell)" +msgid_plural "%1% (%2$d shells)" +msgstr[0] "%1% (%2$d stěna)" +msgstr[1] "%1% (%2$d stěny)" +msgstr[2] "%1% (%2$d stěny)" +msgstr[3] "%1% (%2$d stěn)" + +msgid "" +"%1% marked with * are not compatible with some installed " +"printers." +msgstr "" +"%1% označené * nejsou kompatibilní s některými nainstalovanými " +"tiskárnami." + +msgid "%s has a warning" +msgstr "%s obsahuje varování" + +msgid "%s info" +msgstr "%s info" + +msgid "%s warning" +msgstr "%s varování" + +msgid "&Collapse Sidebar" +msgstr "&Sbalit Postranní panel" + +msgid "&Delete Selected" +msgstr "Sma&zat vybrané" + +msgid "&Fullscreen" +msgstr "&Fullscreen" + +msgid "&G-code Preview" +msgstr "&G-code Prohlížeč" + +msgid "&Select All" +msgstr "Vybrat &Vše" + +msgid "(Some lines not shown)" +msgstr "(Některé řádky nejsou zobrazeny)" + +msgid "0 (off)" +msgstr "0 (vypnuto)" + +msgid "1 (light)" +msgstr "1 (slabé)" + +msgid "2 (default)" +msgstr "2 (výchozí)" + +msgid "3 (heavy)" +msgstr "3 (silné)" + +msgid "" +"\"G92 E0\" was found in before_layer_gcode, which is incompatible with " +"absolute extruder addressing." +msgstr "" +"V before_layer_gcode byl nalezen kód \"G92 E0\", který není kompatibilní s " +"absolutním adresováním extruderu." + +msgid "" +"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute " +"extruder addressing." +msgstr "" +"V kódu layer_gcode byl nalezen kód \"G92 E0\", který není kompatibilní s " +"absolutním adresováním extruderu." + +msgid "A new filament was installed and it will be activated." +msgstr "Byl nainstalován nový filament a bude aktivován." + +msgid "A new Printer was installed and it will be activated." +msgstr "Byla nainstalována nová tiskárna, která bude aktivována." + +msgid "A new SLA material was installed and it will be activated." +msgstr "Byl nainstalován nový SLA materiál a bude aktivován." + +msgid "A new vendor was installed and one of its printers will be activated" +msgid_plural "" +"New vendors were installed and one of theirs printers will be activated" +msgstr[0] "Byl instalován nový výrobce a jedna z jeho tiskáren bude aktivována" +msgstr[1] "" +"Byli nainstalováni noví výrobci a bude aktivována jedna z jejich tiskáren" +msgstr[2] "" +"Byli nainstalováni noví výrobci a bude aktivována jedna z jejich tiskáren" +msgstr[3] "" +"Byli nainstalováni noví výrobci a bude aktivována jedna z jejich tiskáren" + +msgid "" +"A slower printing profile might be necessary when using materials with " +"higher viscosity or with some hollowed parts. It slows down the tilt " +"movement and adds a delay before exposure." +msgstr "" +"Pomalejší tiskový profil může být nutný při použití materiálů s vyšší " +"viskozitou nebo u některých dutých dílů. Zpomaluje pohyb tiltu a přidává " +"zpoždění před osvitem." + +msgid "Abort" +msgstr "Přerušit" + +msgid "Access violation" +msgstr "Porušení přístupu" + +msgid "Add" +msgstr "Přidat" + +msgid "Add Shape from Gallery" +msgstr "Přidání tvaru z galerie" + +msgid "Add Shapes from Gallery" +msgstr "Přidat tvary z galerie" + +msgid "All installed printers are compatible with the selected %1%." +msgstr "Všechny instalované tiskárny jsou kompatibilní s vybraným %1%." + +msgid "All non-solid parts (modifiers) were deleted" +msgstr "Všechny modifikátory byly odstraněny" + +msgid "All settings changes will not be saved" +msgstr "Všechny změny nastavení se neuloží" + +msgid "All user presets will be deleted." +msgstr "Všechna uživatelská přednastavení budou odstraněna." + +msgid "All walls" +msgstr "Všechny stěny" + +msgid "Allow next color repetition" +msgstr "Povolit další opakování barvy" + +msgid "Allows painting only on facets selected by: \"%1%\"" +msgstr "Umožňuje malovat pouze na fasety vybrané pomocí: \"%1%\"" + +msgid "Always ask for unsaved changes in presets when creating new project" +msgstr "" +"Při vytváření nového projektu se vždy zeptat na neuložené změny přednastavení" + +msgid "" +"Always ask for unsaved changes in presets when selecting new preset or " +"resetting a preset" +msgstr "" +"Při výběru nového přednastavení nebo resetování přednastavení se vždy " +"dotazovat na neuložené změny přednastavení" + +msgid "" +"An existing configuration was found in %3%\n" +"created by %1% %2%.\n" +"\n" +"Shall this configuration be imported?" +msgstr "" +"Stávající konfigurace byla nalezena ve složce %3%\n" +"vytvořená programem %1% %2%.\n" +"\n" +"Má být tato konfigurace importována?" + +msgid "" +"An object has custom support enforcers which will not be used because " +"supports are disabled." +msgstr "" +"Na objektu jsou definované vynucené podpěry, které nebudou použity, protože " +"podpěry jsou zakázány." + +msgid "Apply" +msgstr "Použít" + +msgid "Apply color change automatically" +msgstr "Automaticky aplikovat změnu barvy" + +msgid "Apply to all the remaining small objects being loaded." +msgstr "Použít na všechny zbývající malé načítané objekty." + +msgid "Are you sure you want to delete all substitutions?" +msgstr "Jste si jisti, že chcete odstranit všechna nahrazení?" + +msgid "" +"Arrangement ignored the following objects which can't fit into a single " +"bed:\n" +"%s" +msgstr "" +"Uspořádání ignorovalo následující objekty, které se nevejdou na jednu " +"podložku:\n" +"%s" + +msgid "Ask for unsaved changes in presets when creating new project" +msgstr "" +"Dotázat se na neuložené změny v přednastavení při vytváření nového projektu" + +msgid "Ask for unsaved changes in presets when selecting new preset" +msgstr "Zeptat se na neuložené změny v přednastavení při výběru nového profilu" + +msgid "Ask for unsaved changes in project" +msgstr "Dotázat se na neuložené změny v projektu" + +msgid "" +"Ask to save unsaved changes in presets when closing the application or when " +"loading a new project" +msgstr "" +"Dotazovat se na uložení neuložených změn v přednastavení při zavírání " +"aplikace nebo při načítání nového projektu" + +msgid "Auto-repaired %1$d error" +msgid_plural "Auto-repaired %1$d errors" +msgstr[0] "%1$d automaticky opravená chyba" +msgstr[1] "%1$d automaticky opravené chyby" +msgstr[2] "%1$d automaticky opravené chyby" +msgstr[3] "%1$d automaticky opravených chyb" + +msgid "Bail out on unknown configuration values" +msgstr "Záchrana při neznámých hodnotách konfigurace" + +msgid "Best surface quality" +msgstr "Nejlepší kvalita povrchu" + +msgid "Bottom interface layers" +msgstr "Spodní kontaktní vrstvy" + +msgid "Brim separation gap" +msgstr "Odsazení límce" + +msgid "Brim type" +msgstr "Typ límce" + +msgid "Brush" +msgstr "Štětec" + +msgid "Cancel upload" +msgstr "Zrušit nahrávání" + +msgid "CANCELED" +msgstr "ZRUŠENO" + +msgid "Case insensitive" +msgstr "Nerozlišovat malá a velká písmena" + +msgid "Change extruder color" +msgstr "Změna barvy extruderu" + +msgid "Changelog & Download" +msgstr "Changelog & Stažení" + +msgid "Changes for the critical options" +msgstr "Změny u kritických voleb" + +msgid "Check for Configuration Updates" +msgstr "Kontrola aktualizace konfigurací" + +msgid "Clear Undo / Redo stack on new project" +msgstr "Vymazat historii operací Zpět / Vpřed" + +msgid "" +"Clear Undo / Redo stack on new project or when an existing project is loaded." +msgstr "" +"Vymazat historii operací Zpět a Vpřed při otevírání či vytváření nového " +"projektu." + +msgid "Close holes" +msgstr "Uzavírání děr" + +msgid "Closing radius" +msgstr "Poloměr uzavření" + +msgid "Color Change G-code" +msgstr "G-code pro změnu barvy" + +msgid "Compare Presets" +msgstr "Porovnání přednastavení" + +msgid "Compare presets" +msgstr "Porovnání přednastavení" + +msgid "Compare this preset with some another" +msgstr "Porovnat toto přednastavení s jiným" + +msgid "Compared presets has different printer technology" +msgstr "Srovnávaná přednastavení mají odlišnou technologii tisku" + +msgid "COMPLETED" +msgstr "DOKONČENO" + +msgid "Configuration is edited in ConfigWizard" +msgstr "Nastavení se upravuje v Průvodci konfigurace" + +msgid "Configuration is editing from ConfigWizard" +msgstr "Konfigurace se upravuje z nástroje Průvodce nastavením" + +msgid "" +"Configuration Updates causes a lost of preset modification.\n" +"So, check unsaved changes and save them if necessary." +msgstr "" +"Aktualizace konfigurace způsobí ztrátu změn v přednastaveních.\n" +"Zkontrolujte tedy neuložené změny a případně je uložte." + +msgid "Continue" +msgstr "Pokračovat" + +msgid "continue" +msgstr "pokračovat" + +msgid "Continue and import newer configuration?" +msgstr "Pokračovat a importovat novější konfiguraci?" + +msgid "Convert from meters" +msgstr "Převod z metrů" + +msgid "Correction for expansion in X axis" +msgstr "Korekce roztažnosti v ose X" + +msgid "Correction for expansion in Y axis" +msgstr "Korekce roztažnosti v ose Y" + +msgid "Correction for expansion in Z axis" +msgstr "Korekce roztažnosti v ose Z" + +msgid "" +"Cracks smaller than 2x gap closing radius are being filled during the " +"triangle mesh slicing. The gap closing operation may reduce the final print " +"resolution, therefore it is advisable to keep the value reasonably low." +msgstr "" +"Praskliny menší než 2x poloměr uzavření mezery se vyplní během slicování " +"trojúhelníkových sítí. Operace uzavírání mezery může snížit konečné " +"rozlišení tisku, proto je vhodné udržovat rozumně nízkou hodnotu." + +msgid "Creating a new project" +msgstr "Vytváření nového projektu" + +msgid "Creating a new project while some presets are modified." +msgstr "Vytváření nového projektu. Některá přednastavení jsou upravená." + +msgid "Creating a new project while the current project is modified." +msgstr "Vytvoření nového projektu. Současný projekt byl změněn." + +msgid "Custom printer was installed and it will be activated." +msgstr "Vlastní tiskárna byla nainstalována a bude aktivována." + +msgid "" +"Custom supports, seams and multimaterial painting were removed after " +"repairing the mesh." +msgstr "" +"Po opravě modelu byly odstraněny vlastní podpěry, švy a multimateriálové " +"malování." + +msgid "D&eselect All" +msgstr "Odznačit Vš&e" + +msgid "Dark mode (experimental)" +msgstr "Tmavý režim (experimentální)" + +msgid "Delete &All" +msgstr "Sm&azat Vše" + +msgid "Delete All Objects" +msgstr "Smazat všechny objekty" + +msgid "Density of the first raft or support layer." +msgstr "Hustota prvního vrstvy raftu nebo podpěrné vrstvy." + +msgid "Desktop Integration" +msgstr "Integrace do systému" + +msgid "Desktop integration failed." +msgstr "Integrace do systému selhala." + +msgid "Desktop integration was successful." +msgstr "Integrace do systému proběhla úspěšně." + +msgid "differs from the original file" +msgstr "liší se od původního souboru" + +msgid "Disable \"%1%\"" +msgstr "Zakázat \"%1%\"" + +msgid "Divide by zero" +msgstr "Dělení nulou" + +msgid "Do you want to continue changing the configuration?" +msgstr "Chcete pokračovat v provádění změn konfigurace?" + +msgid "Do you want to replace it" +msgstr "Chcete udělat náhradu" + +msgid "Do you want to save the changes to \"%1%\"?" +msgstr "Chcete uložit změny do \"%1%\"?" + +msgid "Don't import" +msgstr "Neimportovat" + +msgid "Don't save" +msgstr "Neukládat" + +msgid "Edit" +msgstr "Upravit" + +msgid "Eigen vectorization supported:" +msgstr "Podporovaná vlastní vektorizace:" + +msgid "Ejec&t SD Card / Flash Drive" +msgstr "Vysunou&t SD kartu / Flash disk" + +msgid "Empty layer between %1% and %2%." +msgstr "Prázdná vrstva mezi %1% a %2%." + +msgid "Enable dark mode" +msgstr "Aktivace tmavého režimu" + +msgid "" +"Enable reading unknown configuration values by silently substituting them " +"with defaults." +msgstr "" +"Umožňuje načítání neznámých konfiguračních hodnot jejich tichým nahrazením " +"výchozími hodnotami." + +msgid "" +"Enable reading unknown configuration values by verbosely substituting them " +"with defaults." +msgstr "" +"Umožňuje načítání neznámých konfiguračních hodnot jejich výslovným " +"nahrazením výchozími hodnotami." + +msgid "Enable supports for enforcers only" +msgstr "Povolení pouze vynucených podpěr" + +msgid "Enabled" +msgstr "Povoleno" + +msgid "Ensure on bed" +msgstr "Zajistit položení na podložku" + +msgid "ERROR" +msgstr "CHYBA" + +msgid "Error during replace" +msgstr "Chyba při nahrazení" + +msgid "" +"ERROR: Please close all manipulators available from the left toolbar first" +msgstr "" +"CHYBA: Nejprve zavřete všechny manipulátory dostupné z levého panelu nástrojů" + +msgid "Estimated printing times" +msgstr "Odhadované časy tisku" + +msgid "Even-odd" +msgstr "Paritní vyplňování" + +msgid "" +"Expansion of the first raft or support layer to improve adhesion to print " +"bed." +msgstr "" +"Rozšíření první vrstvy raftu nebo první vrstvy podpěr pro zlepšení " +"přilnavosti k tiskové podložce." + +msgid "Expansion of the raft in XY plane for better stability." +msgstr "Rozšíření raftu v rovině XY pro lepší stabilitu." + +msgid "Export &Toolpaths as OBJ" +msgstr "Exportovat &Trasy extruderu jako OBJ" + +msgid "Export G-code to SD Card / Flash Drive" +msgstr "Exportovat G-code na SD kartu / Flash disk" + +msgid "Export Plate as &STL" +msgstr "Exportovat Plochu jako &STL" + +msgid "Export Plate as STL &Including Supports" +msgstr "Exportovat T&iskovou plochu včetně podpěr jako STL" + +msgid "Export." +msgstr "Export." + +msgid "Exporting configuration bundle" +msgstr "Exportování konfiguračního balíku" + +msgid "Exporting." +msgstr "Exportování." + +msgid "Failed to drill some holes into the model" +msgstr "Některé otvory se do modelu nepodařilo se vyvrtat" + +msgid "Filament End G-code" +msgstr "Filament Konec G-code" + +msgid "Filament Start G-code" +msgstr "Filament Začátek G-code" + +msgid "File for the replace wasn't selected" +msgstr "Soubor pro nahrazení nebyl vybrán" + +msgid "Find" +msgstr "Najít" + +msgid "Find / replace patterns in G-code lines and substitute them." +msgstr "Vyhledávání / nahrazování vzorů v řádcích G-code a jejich nahrazování." + +msgid "First layer density" +msgstr "Hustota první vrstvy" + +msgid "First layer expansion" +msgstr "Rozšíření první vrstvy" + +msgid "" +"First layer height is not valid.\n" +"\n" +"The first layer height will be reset to 0.01." +msgstr "" +"Výška první vrstvy není platná.\n" +"\n" +"Výška vrstvy bude resetována na 0,01." + +msgid "First object layer over raft interface" +msgstr "První vrstva objektu nad raftem" + +msgid "Fixing through NetFabb" +msgstr "Oprava prostřednictvím NetFabb" + +msgid "Flash Printer &Firmware" +msgstr "Nahrát &Firmware Tiskárny" + +msgid "Floating reserved operand" +msgstr "Plovoucí rezervovaný operand" + +msgid "" +"Following printer preset is duplicated:%1%The above preset for printer \"%2%" +"\" will be used just once." +msgid_plural "" +"Following printer presets are duplicated:%1%The above presets for printer " +"\"%2%\" will be used just once." +msgstr[0] "" +"Následující přednastavení tiskárny je duplicitní:%1%Výše uvedené " +"přednastavení pro tiskárnu \"%2%\" bude použito pouze jednou." +msgstr[1] "" +"Následující přednastavení tiskárny jsou duplicitní:%1%Výše uvedené " +"přednastavení pro tiskárnu \"%2%\" budou použity pouze jednou." +msgstr[2] "" +"Následující přednastavení tiskárny jsou duplicitní:%1%Výše uvedené " +"přednastavení pro tiskárnu \"%2%\" budou použity pouze jednou." +msgstr[3] "" +"Následující přednastavení tiskárny jsou duplicitní:%1%Výše uvedené " +"přednastavení pro tiskárnu \"%2%\" budou použity pouze jednou." + +msgid "" +"Following printer profiles has no default filament: %1%Please select one " +"manually." +msgstr "" +"Následující profily tiskáren nemají žádný výchozí filament: %1%Vyberte jej " +"prosím ručně." + +msgid "" +"Following printer profiles has no default material: %1%Please select one " +"manually." +msgstr "" +"Následující profily tiskáren nemají žádný výchozí materiál: %1%Vyberte jej " +"prosím ručně." + +msgid "Folowing model repair failed" +msgid_plural "Folowing models repair failed" +msgstr[0] "Oprava modelu se nezdařila" +msgstr[1] "Opravy modelů se nezdařily" +msgstr[2] "Opravy modelů se nezdařily" +msgstr[3] "Opravy modelů se nezdařily" + +msgid "" +"For a multipart object, this value isn't accurate.\n" +"It doesn't take account of intersections and negative volumes." +msgstr "" +"Pro vícedílný objekt není tato hodnota přesná.\n" +"Nezohledňuje průniky a negativní objemy." + +msgid "For new project all modifications will be reseted" +msgstr "U nového projektu budou všechny změny resetovány" + +msgid "" +"For snug supports, the support regions will be merged using morphological " +"closing operation. Gaps smaller than the closing radius will be filled in." +msgstr "" +"V případě přiléhavých podpor se oblasti podpor sloučí pomocí morfologické " +"uzavírací operace. Mezery menší než poloměr uzavření budou vyplněny." + +msgid "Found reserved keywords in" +msgstr "Nalezená vyhrazená klíčová slova v" + +msgid "Fullscreen" +msgstr "Fullscreen" + +msgid "Fuzzy Skin" +msgstr "Členitý povrch" + +msgid "Fuzzy skin (experimental)" +msgstr "Členitý povrch (experimentální)" + +msgid "Fuzzy skin point distance" +msgstr "Vzdálenosti bodů členitého povrchu" + +msgid "Fuzzy skin thickness" +msgstr "Tloušťka členitého povrchu" + +msgid "Fuzzy skin type." +msgstr "Typ členitého povrchu." + +msgid "G-code resolution" +msgstr "G-code rozlišení" + +msgid "G-code substitutions" +msgstr "Nahrazení G-codu" + +msgid "Generating skirt and brim" +msgstr "Generování obrysu a límce" + +msgid "Gizmo FDM paint-on seam" +msgstr "Gizmo FDM malování pozice švu" + +msgid "Gizmo FDM paint-on supports" +msgstr "Gizmo FDM malování podpěr" + +msgid "Gizmo Multi Material painting" +msgstr "Gizmo Multimateriálového malování" + +msgid "Highlight overhang by angle" +msgstr "Zvýraznění převisu podle úhlu" + +msgid "If enabled, a repetition of the next random color will be allowed." +msgstr "Pokud je povoleno, bude povoleno opakování další náhodné barvy." + +msgid "" +"If enabled, application will use the standard Windows system menu,\n" +"but on some combination of display scales it can looks ugly. If disabled, " +"old UI will be used." +msgstr "" +"Pokud je povoleno, aplikace použije standardní systémovou nabídku Windows,\n" +"ale na některých měřítkách obrazovky to nemusí vypadat dobře. Pokud není " +"povoleno, použije se původní uživatelské rozhraní." + +msgid "If enabled, PrusaSlicer will be open at the position it was closed" +msgstr "" +"Pokud je povoleno, PrusaSlicer se otevře na pozici, na které byl zavřen." + +msgid "If enabled, PrusaSlicer will not open hyperlinks in your browser." +msgstr "" +"Pokud je tato funkce povolena, PrusaSlicer nebude v prohlížeči otevírat " +"hypertextové odkazy." + +msgid "If enabled, random sequence of the selected extruders will be used." +msgstr "" +"Pokud je tato možnost povolena, použije se náhodné pořadí vybraných " +"extruderů." + +msgid "" +"If enabled, Settings Tabs will be placed as menu items. If disabled, old UI " +"will be used." +msgstr "" +"Pokud je tato možnost povolena, budou karty Nastavení umístěny jako položky " +"nabídky. Pokud je zakázáno, bude použito původní uživatelské rozhraní." + +msgid "" +"If enabled, the axes names and axes values will be colorized according to " +"the axes colors. If disabled, old UI will be used." +msgstr "" +"Pokud je tato možnost povolena, názvy os a hodnoty os se zbarví podle barev " +"os. Pokud je vypnuto, bude použito staré uživatelské rozhraní." + +msgid "" +"If enabled, UI will use Dark mode colors. If disabled, old UI will be used." +msgstr "" +"Pokud je tato možnost povolena, bude uživatelské rozhraní používat tmavý " +"režim. Pokud je zakázáno, bude použito původní uživatelské rozhraní." + +msgid "If enabled, useful hints are displayed at startup." +msgstr "" +"Pokud je tato možnost povolena, zobrazí se při spuštění aplikace užitečné " +"tipy." + +msgid "" +"If enabled, volumes will be always ordered inside the object. Correct order " +"is Model Part, Negative Volume, Modifier, Support Blocker and Support " +"Enforcer. If disabled, you can reorder Model Parts, Negative Volumes and " +"Modifiers. But one of the model parts have to be on the first place." +msgstr "" +"Pokud je tato volba povolena, objemy budou vždy umístěny uvnitř objektu. " +"Správné pořadí je Modely, Negativní objem, Modifikátor, Blokátor podpěr a " +"Vynucovatel podpěr. Je-li zakázáno, můžete změnit pořadí Modelů, Negativních " +"objemů a Modifikátorů. Jeden z modelů však musí být na prvním místě." + +msgid "Ignore HTTPS certificate revocation checks" +msgstr "Ignorování kontrol revokace HTTPS certifikátu" + +msgid "" +"Ignore HTTPS certificate revocation checks in case of missing or offline " +"distribution points. One may want to enable this option for self signed " +"certificates if connection fails." +msgstr "" +"Ignorování kontrol revokace HTTPS certifikátu v případě chybějících nebo " +"offline distribučních bodů. Tuto možnost lze povolit pro certifikáty " +"podepsané vlastním podpisem v případě, že se připojení nezdaří." + +msgid "Illegal instruction" +msgstr "Nepovolený příkaz" + +msgid "Import" +msgstr "Importovat" + +msgid "Import Config from &Project" +msgstr "Načíst konfiguraci z &Projektu" + +msgid "Import SL1 / SL1S Archive" +msgstr "Importovat SL1 / SL1S Archiv" + +msgid "Import STL (Imperial Units)" +msgstr "Importovat STL (imperiální jednotky)" + +msgid "In the custom G-code were found reserved keywords:" +msgstr "Ve vlastním G-kódu byla nalezena vyhrazená klíčová slova:" + +msgid "Inner brim only" +msgstr "Pouze vnitřní límec" + +msgid "Internal error: %1%" +msgstr "Vnitřní chyba: %1%" + +msgid "Keep" +msgstr "Ponechat" + +msgid "Keep the selected settings." +msgstr "Zachovejte vybraná nastavení." + +msgid "" +"Layer height is not valid.\n" +"\n" +"The layer height will be reset to 0.01." +msgstr "" +"Výška vrstvy není platná.\n" +"\n" +"Výška vrstvy bude resetována na 0,01." + +msgid "Leave \"%1%\" enabled" +msgstr "Ponechat možnost \"%1%\" povolenou" + +msgid "Left Preset Value" +msgstr "Hodnota levého přednastavení" + +msgid "" +"Lift the object above the bed when it is partially below. Enabled by " +"default, use --no-ensure-on-bed to disable." +msgstr "" +"Zvedne objekt nad podložku v případě, pokud je je částečně pod ním. Ve " +"výchozím nastavení povoleno, pro zakázání použijte --no-ensure-on-bed." + +msgid "Lightning" +msgstr "Lightning" + +msgid "Limited" +msgstr "Omezené" + +msgid "Load Modifier" +msgstr "Načíst Modifikátor" + +msgid "Loading a configuration snapshot" +msgstr "Načítání konfiguračního snapshotu" + +msgid "Loading a new project while the current project is modified." +msgstr "Načítání nového projektu. Současný projekt byl změněn." + +msgid "Loading of a configuration bundle" +msgstr "Načítání konfiguračního balíku" + +msgid "Loading of a configuration file" +msgstr "Načítání konfiguračního souboru" + +msgid "Lowest Z height" +msgstr "Nejnižší výška v ose Z" + +msgid "" +"Make sure the object is printable. This is usually caused by negligibly " +"small extrusions or by a faulty model. Try to repair the model or change its " +"orientation on the bed." +msgstr "" +"Ujistěte se, že je objekt tisknutelný. Bývá to způsobeno zanedbatelně malými " +"extruzemi nebo vadným modelem. Zkuste model opravit nebo změnit jeho " +"orientaci na podložce." + +msgid "Match single line" +msgstr "Shoda na jednom řádku" + +msgid "Material printing profile" +msgstr "Profil tiskového materiálu" + +msgid "Maximum acceleration for travel moves" +msgstr "Maximální zrychlení pro posuny" + +msgid "" +"Maximum acceleration when extruding (M204 P)\n" +"\n" +"Marlin (legacy) firmware flavor will use this also as travel acceleration " +"(M204 T)." +msgstr "" +"Maximální zrychlení při vytlačování (M204 P)\n" +"\n" +"Marlin (legacy) firmware používá toto také jako zrychlení při přesunu (M204 " +"T)." + +msgid "" +"Maximum deviation of exported G-code paths from their full resolution " +"counterparts. Very high resolution G-code requires huge amount of RAM to " +"slice and preview, also a 3D printer may stutter not being able to process a " +"high resolution G-code in a timely manner. On the other hand, a low " +"resolution G-code will produce a low poly effect and because the G-code " +"reduction is performed at each layer independently, visible artifacts may be " +"produced." +msgstr "" +"Maximální odchylka exportovaných cest G-codu od plného rozlišení. G-code ve " +"velmi vysokém rozlišení vyžaduje při slicování a náhledu obrovské množství " +"paměti RAM a také se může stát, že 3D tiskárna nebude schopna včas zpracovat " +"G-code ve vysokém rozlišení. Na druhou stranu G-code s nízkým rozlišením " +"vytvoří low poly efekt a protože redukce G-codu se provádí v každé vrstvě " +"nezávisle, mohou vznikat viditelné artefakty." + +msgid "Maximum width of a segmented region" +msgstr "Maximální šířka segmentované oblasti" + +msgid "Maximum width of a segmented region. Zero disables this feature." +msgstr "Maximální šířka segmentované oblasti. Nula tuto funkci vypne." + +msgid "" +"Mesh to be hollowed is not suitable for hollowing (does not bound a volume)." +msgstr "" +"Mesh, která má být vydutěná, není vhodná pro vydutění (neohraničuje těleso)." + +msgid "Minimize application" +msgstr "Minimalizace aplikace" + +msgid "More" +msgstr "Více" + +msgid "Multimaterial painting" +msgstr "Multimateriálové malování" + +msgid "Names of presets related to the physical printer" +msgstr "Názvy přednastavení souvisejících s fyzickou tiskárnou" + +msgid "Negative Volume" +msgstr "Negativní Objem" + +msgid "New prerelease version %1% is available." +msgstr "K dispozici je nová předběžná verze %1%." + +msgid "New printer preset selected" +msgstr "Zvoleno nové přednastavení tiskárny" + +msgid "New release version %1% is available." +msgstr "K dispozici je nová verze %1%." + +msgid "No brim" +msgstr "Bez límce" + +msgid "" +"No color change event was added to the print. The print does not look like a " +"sign." +msgstr "Do tisku nebyla přidána žádná změny barvy. Tisk nevypadá jako nápis." + +msgid "No errors detected" +msgstr "Nebyly zjištěny žádné chyby" + +msgid "Note, that the selected preset will be deleted from this printer too." +msgid_plural "" +"Note, that the selected preset will be deleted from these printers too." +msgstr[0] "Pozor, vybrané přednastavení bude odstraněno i z této tiskárny." +msgstr[1] "Pozor, vybrané přednastavení bude odstraněno i z těchto tiskáren." +msgstr[2] "Pozor, vybrané přednastavení bude odstraněno i z těchto tiskáren." +msgstr[3] "Pozor, vybrané přednastavení bude odstraněno i z těchto tiskáren." + +msgid "" +"Note, that this printer will be deleted after deleting the selected preset." +msgid_plural "" +"Note, that these printers will be deleted after deleting the selected preset." +msgstr[0] "" +"Upozorňujeme, že tato tiskárna bude po smazání vybraného přednastavení " +"odstraněna." +msgstr[1] "" +"Upozorňujeme, že tyto tiskárny budou po smazání vybraného přednastavení " +"odstraněny." +msgstr[2] "" +"Upozorňujeme, že tyto tiskárny budou po smazání vybraného přednastavení " +"odstraněny." +msgstr[3] "" +"Upozorňujeme, že tyto tiskárny budou po smazání vybraného přednastavení " +"odstraněny." + +msgid "NOTE:" +msgstr "POZNÁMKA:" + +msgid "Notify about new releases" +msgstr "Upozornění na nové verze" + +msgid "" +"Number of interface layers to insert between the object(s) and support " +"material. Set to -1 to use support_material_interface_layers" +msgstr "" +"Počet kontaktních vrstev, které se vloží mezi objekt(y) a podpěry. Nastavte " +"na -1, chcete-li použít support_material_interface_layers" + +msgid "Object name: %1%" +msgstr "Název objektu: %1%" + +msgid "" +"Object size from file %s appears to be zero.\n" +"This object has been removed from the model" +msgid_plural "" +"Objects size from file %s appears to be zero.\n" +"These objects have been removed from the model" +msgstr[0] "" +"Velikost objektu ze souboru %s se zdá být nulová.\n" +"Tento objekt byl z modelu odstraněn" +msgstr[1] "" +"Velikost objektů ze souboru %s se zdá být nulová.\n" +"Tento objekty byly z modelu odstraněny." +msgstr[2] "" +"Velikost objektů ze souboru %s se zdá být nulová.\n" +"Tento objekty byly z modelu odstraněny." +msgstr[3] "" +"Velikost objektů ze souboru %s se zdá být nulová.\n" +"Tento objekty byly z modelu odstraněny." + +msgid "object" +msgid_plural "objects" +msgstr[0] "objekt" +msgstr[1] "objektů" +msgstr[2] "objektů" +msgstr[3] "objektů" + +msgid "Objects List" +msgstr "Seznam Objektů" + +msgid "On overhangs only" +msgstr "Pouze na převisech" + +msgid "One of the presets doesn't found" +msgstr "Jedno z přednastavení nebylo nalezeno" + +msgid "" +"Only the following installed printers are compatible with the selected " +"filaments" +msgstr "" +"S vybraným filamentem jsou kompatibilní pouze následující nainstalované " +"tiskárny" + +msgid "" +"Only the following installed printers are compatible with the selected SLA " +"materials" +msgstr "" +"S vybranými SLA materiály jsou kompatibilní pouze následující nainstalované " +"tiskárny" + +msgid "Open hyperlink in default browser?" +msgstr "Otevřít hypertextový odkaz ve výchozím prohlížeči?" + +msgid "Open New Instance" +msgstr "Otevřít Novou Instanci" + +msgid "Open the dialog to modify shape gallery" +msgstr "Otevřete dialogové okno pro úpravu galerie tvarů" + +msgid "Opening new project while some presets are unsaved." +msgstr "Otevírání nového projektu. Některá přednastavení nejsou uložena." + +msgid "" +"Opens Tip of the day notification in bottom right corner or shows another " +"tip if already opened." +msgstr "" +"Zobrazí notifikaci s \"Tipem dne\" v pravém dolním rohu nebo zobrazí jinou, " +"pokud je již nějaká otevřená." + +msgid "Optimize object rotation for best surface quality." +msgstr "" +"Optimalizovat natočení objektu pro dosažení co nejlepší kvality povrchu." + +msgid "" +"Optimize object rotation to have minimum amount of overhangs needing support " +"structures.\n" +"Note that this method will try to find the best surface of the object for " +"touching the print bed if no elevation is set." +msgstr "" +"Optimalizuje natočení objektu tak, aby měl minimální množství převisů " +"vyžadujících podpěry.\n" +"Všimněte si, že tato metoda se pokusí najít nejvhodnější plochu objektu pro " +"dotyk s tiskovou podložkou, pokud není nastavené nadzvednutí objektu nad " +"podložku." + +msgid "Order object volumes by types" +msgstr "Řazení manipulátorů objektu podle typu" + +msgid "Outer and inner brim" +msgstr "Vnější a vnitřní límec" + +msgid "Outer brim only" +msgstr "Pouze vnější okraj" + +msgid "Outside walls" +msgstr "Vnější stěny" + +msgid "Overflow" +msgstr "Přetečení" + +msgid "Paint-on seam" +msgstr "Malování pozice švu" + +msgid "Paints facets according to the chosen painting brush." +msgstr "Maluje fasety podle zvoleného typu štětce." + +msgid "" +"Paints neighboring facets whose relative angle is less or equal to set angle." +msgstr "" +"Vybarví sousední fasety, jejichž relativní úhel je menší nebo roven " +"nastavenému úhlu." + +msgid "Paints only one facet." +msgstr "Maluje pouze jeden facet." + +msgid "" +"Perform desktop integration (Sets this binary to be searchable by the " +"system)." +msgstr "" +"Provést integraci do systému (Nastaví tuto binárku tak, aby ji systém mohl " +"prohledávat)." + +msgid "" +"Please save your project and restart PrusaSlicer. We would be glad if you " +"reported the issue." +msgstr "" +"Uložte projekt a restartujte PrusaSlicer. Budeme rádi, když nám problém " +"nahlásíte." + +msgid "Post processing scripts shall modify G-code file in place." +msgstr "Post-processing skripty musí G-code upravit in place." + +msgid "" +"Preselects faces by overhang angle. It is possible to restrict paintable " +"facets to only preselected faces when the option \"%1%\" is enabled." +msgstr "" +"Předvybere plochy podle úhlu převisu. Pokud je povolena volba \"%1%\", je " +"možné omezit namalované plochy pouze na předem vybrané plochy." + +msgid "" +"Presets are different.\n" +"Click this button to select the same preset for the right and left preset." +msgstr "" +"Přednastavení se liší.\n" +"Kliknutím na toto tlačítko vyberete stejná nastavení pro pravé i levé " +"přednastavení." + +msgid "Presets are the same" +msgstr "Přednastavení jsou shodná" + +msgid "Print speed" +msgstr "Rychlost tisku" + +msgid "Printer preset names" +msgstr "Názvy přednastavení tiskáren" + +msgid "Printer scaling correction in X axis" +msgstr "Korekce měřítka v ose X" + +msgid "Printer scaling correction in Y axis" +msgstr "Korekce měřítka v ose Y" + +msgid "Printer scaling correction in Z axis" +msgstr "Korekce měřítka v ose Z" + +msgid "Printer scaling X axis correction" +msgstr "Korekce měřítka v ose X" + +msgid "Printer scaling Y axis correction" +msgstr "Korekce měřítka v ose Y" + +msgid "Printer scaling Z axis correction" +msgstr "Korekce měřítka v ose Z" + +msgid "Project is loading" +msgstr "Projekt se načítá" + +msgid "PrusaSlicer has encountered a fatal error: \"%1%\"" +msgstr "PrusaSlicer narazil na fatální chybu: \"%1%\"" + +msgid "PrusaSlicer: Open hyperlink" +msgstr "PrusaSlicer: Otevřít hypertextový odkaz" + +msgid "Raft contact Z distance" +msgstr "Mezera mezi objektem a raftem v ose Z" + +msgid "Raft expansion" +msgstr "Rozšíření raftu" + +msgid "Random sequence" +msgstr "Náhodná sekvence" + +msgid "Re&load from Disk" +msgstr "Znovu &načíst z disku" + +msgid "Reduced overhang slopes" +msgstr "Snížené sklony převisů" + +msgid "Regular" +msgstr "Obvyklý" + +msgid "Regular expression" +msgstr "Regulární výraz" + +msgid "Release only" +msgstr "Pouze stabilní verze" + +msgid "Remaining errors" +msgstr "Zbylé chyby" + +msgid "Remove Multi Material painting" +msgstr "Odstranění Multimateriálového malování" + +msgid "Remove paint-on seam" +msgstr "Odstranění namalovaného švu" + +msgid "Remove paint-on supports" +msgstr "Odstranění malování podpěr" + +msgid "Remove variable layer height" +msgstr "Odstranění proměnné výšky vrstvy" + +msgid "Repairing model" +msgstr "Oprava modelu" + +msgid "Repairing was canceled" +msgstr "Oprava byla zrušena" + +msgid "Replace from:" +msgstr "Nahradit z:" + +msgid "Replace with" +msgstr "Nahradit" + +msgid "Replace with STL" +msgstr "Nahradit STL souborem" + +msgid "Restart application" +msgstr "Restart aplikace" + +msgid "Restore window position on start" +msgstr "Obnovení polohy okna při spuštění" + +msgid "Revert color to default" +msgstr "Vrátit barvu na výchozí" + +msgid "Revert conversion from meters" +msgstr "Vrátit převod z metrů" + +msgid "Right Preset Value" +msgstr "Hodnota pravého přednastavení" + +msgid "Rotate the model to have the lowest z height for faster print time." +msgstr "" +"Otočit model tak, aby měl co nejmenší výšku, čímž se zkrátí doba tisku." + +msgid "Same as top" +msgstr "Stejné jako vrchní" + +msgid "Save project" +msgstr "Uložit projekt" + +msgid "Save support points?" +msgstr "Uložit podpěrné body?" + +msgid "Seams" +msgstr "Švy" + +msgid "See Download page." +msgstr "Viz stránka ke stažení." + +msgid "Select a file" +msgstr "Vyberte soubor" + +msgid "Select presets to compare" +msgstr "Zvolte přednastavení k porovnání" + +msgid "Select the new file" +msgstr "Vyberte nový soubor" + +msgid "Set auto color changes" +msgstr "Nastavení automatických změn barev" + +msgid "Set default extruder for the selected items" +msgstr "Nastavení výchozího extruderu pro vybrané položky" + +msgid "Set extruder number for the selected items" +msgstr "Nastavení čísla extruderu pro vybrané položky" + +msgid "Set Printable group" +msgstr "Nastavení tisknutelné skupiny modelů" + +msgid "Set selected items as Printable/Unprintable" +msgstr "Nastavení vybraných položek jako tisknuté/netisknuté" + +msgid "Set settings tabs as menu items (experimental)" +msgstr "Karty s nastavením zobrazovat jako položky v menu (experimentální)" + +msgid "Set Unprintable group" +msgstr "Nastavení netisknutelné skupiny modelů" + +msgid "Shape Gallery" +msgstr "Galerie Tvarů" + +msgid "Shift objects to bed" +msgstr "Posunout objekty na podložku" + +msgid "Show &Labels" +msgstr "Zobrazit &Popisky" + +msgid "Show \"Tip of the day\" notification after start" +msgstr "Zobrazovat \"Tip dne\" po spuštění" + +msgid "Show all presets (including incompatible)" +msgstr "Zobrazit všechna přednastavení (včetně nekompatibilních)" + +msgid "Show Tip of the Day" +msgstr "Ukázat Tip Dne" + +msgid "Show/Hide G-code window" +msgstr "Zobrazit/skrýt okno s G-code" + +msgid "Sinking" +msgstr "Potopení" + +msgid "Skirt and brim" +msgstr "Obrys a límec" + +msgid "Skirt/Brim" +msgstr "Obrys/Límec" + +msgid "SLA materials" +msgstr "SLA materiály" + +msgid "Slice resolution" +msgstr "Rozlišení slicování" + +msgid "Sliced object \"%1%\" looks like a logo or a sign" +msgstr "Slicovaný objekt \"%1%\" vypadá jako logo nebo nápis" + +msgid "Slicing Mode" +msgstr "Režim slicování" + +msgid "Smart fill" +msgstr "Chytré vybarvení" + +msgid "Smart fill angle" +msgstr "Úhel chytrého vybarvení" + +msgid "Snug" +msgstr "Přiléhavý" + +msgid "Solid " +msgstr "Plný " + +msgid "Some filaments were uninstalled." +msgstr "Některé filamenty byly odinstalovány." + +msgid "Some objects are not visible during editing." +msgstr "Některé objekty nejsou během úprav viditelné." + +msgid "" +"Some presets are modified and the unsaved changes will not be captured by " +"the configuration snapshot." +msgstr "" +"Některá přednastavení jsou upravená a neuložené změny nebudou zachyceny v " +"záloze konfigurace." + +msgid "" +"Some presets are modified and the unsaved changes will not be exported into " +"configuration bundle." +msgstr "" +"Některá přednastavení jsou upravená a neuložené změny nebudou exportovány do " +"zálohy konfigurace." + +msgid "Some Printers were uninstalled." +msgstr "Některé tiskárny byly odinstalovány." + +msgid "Some SLA materials were uninstalled." +msgstr "Některé SLA materiály byly odinstalovány." + +msgid "" +"Speed for movements along the Z axis.\n" +"When set to zero, the value is ignored and regular travel speed is used " +"instead." +msgstr "" +"Rychlost pro pohyby podél osy Z.\n" +"Pokud je nastavena na nulu, hodnota se ignoruje a místo ní se použije běžná " +"rychlost pohybu." + +msgid "Split triangles" +msgstr "Rozdělovat trojúhelníky" + +msgid "Splits bigger facets into smaller ones while the object is painted." +msgstr "Během malování objektu rozdělí větší fasety na menší." + +msgid "Stack overflow" +msgstr "Přetečení zásobníku" + +msgid "Style" +msgstr "Styl" + +msgid "" +"Style and shape of the support towers. Projecting the supports into a " +"regular grid will create more stable supports, while snug support towers " +"will save material and reduce object scarring." +msgstr "" +"Styl a tvar podpěr. Promítnutí podpěr do pravidelné mřížky vytvoří " +"stabilnější podpěry, zatímco přiléhavé podpěry ušetří materiál a omezí " +"nežádoucí jizvy na objektu." + +msgid "" +"Switching the printer technology from %1% to %2%.\n" +"Some %1% presets were modified, which will be lost after switching the " +"printer technology." +msgstr "" +"Přepnutí technologie tisku z %1% na %2%.\n" +"Byly upravena některá přednastavení %1%, která budou po přepnutí technologie " +"tisku ztracena." + +msgid "Taking a configuration snapshot" +msgstr "Pořizování konfiguračního snapshotu" + +msgid "Taking a configuration snapshot failed." +msgstr "Pořizování konfiguračního snapshotu selhalo." + +msgid "Temperature (°C)" +msgstr "Teplota (°C)" + +msgid "Text colors" +msgstr "Podbarvení textu" + +msgid "" +"The active configuration was created by %1% %2%,\n" +"while a newer configuration was found in %3%\n" +"created by %1% %4%.\n" +"\n" +"Shall the newer configuration be imported?\n" +"If so, your active configuration will be backed up before importing the new " +"configuration." +msgstr "" +"Aktivní konfigurace byla vytvořena programem %1% %2%,\n" +"zatímco novější konfigurace byla nalezena ve složce %3%\n" +"vytvořené %1% %4%.\n" +"\n" +"Má být importována novější konfigurace?\n" +"Pokud ano, bude aktivní konfigurace před importem nové konfigurace " +"zálohována." + +msgid "The following characters are not allowed by a FAT file system:" +msgstr "Následující znaky nejsou v souborovém systému FAT povoleny:" + +msgid "" +"The following line %s contains reserved keywords.\n" +"Please remove it, as it may cause problems in G-code visualization and " +"printing time estimation." +msgid_plural "" +"The following lines %s contain reserved keywords.\n" +"Please remove them, as they may cause problems in G-code visualization and " +"printing time estimation." +msgstr[0] "" +"Řádek %s obsahuje vyhrazená klíčová slova.\n" +"Odstraňte jej, protože může způsobit problémy při vizualizaci G-codu a " +"odhadu času tisku." +msgstr[1] "" +"Řádky %s obsahují vyhrazená klíčová slova.\n" +"Odstraňte je, protože mohou způsobit problémy při vizualizaci G-codu a " +"odhadu času tisku." +msgstr[2] "" +"Řádky %s obsahují vyhrazená klíčová slova.\n" +"Odstraňte je, protože mohou způsobit problémy při vizualizaci G-codu a " +"odhadu času tisku." +msgstr[3] "" +"Řádky %s obsahují vyhrazená klíčová slova.\n" +"Odstraňte je, protože mohou způsobit problémy při vizualizaci G-codu a " +"odhadu času tisku." + +msgid "The following model was repaired successfully" +msgid_plural "The following models were repaired successfully" +msgstr[0] "Následující model byl úspěšně opraven" +msgstr[1] "Následující modely byly úspěšně opraveny" +msgstr[2] "Následující modely byly úspěšně opraveny" +msgstr[3] "Následující modely byly úspěšně opraveny" + +msgid "The following preset was modified" +msgid_plural "The following presets were modified" +msgstr[0] "Bylo upravena následující přednastavení" +msgstr[1] "Byla upravena následující přednastavení" +msgstr[2] "Byla upravena následující přednastavení" +msgstr[3] "Byla upravena následující přednastavení" + +msgid "" +"The imported SLA archive did not contain any presets. The current SLA " +"presets were used as fallback." +msgstr "" +"Importovaný archiv SLA neobsahoval žádné přednastavení. Aktuální SLA " +"přednastavení bylo použito jako záložní." + +msgid "The name cannot be the same as a preset alias name." +msgstr "Název se nesmí shodovat s názvem aliasem přednastavení." + +msgid "The object is too small" +msgstr "Objekt je příliš malý" + +msgid "" +"The physical printer below is based on the preset, you are going to delete." +msgid_plural "" +"The physical printers below are based on the preset, you are going to delete." +msgstr[0] "" +"Níže uvedená fyzická tiskárna je založeny na přednastavení, které se " +"chystáte odstranit." +msgstr[1] "" +"Níže uvedené fyzické tiskárny jsou založeny na přednastavení, které se " +"chystáte odstranit." +msgstr[2] "" +"Níže uvedené fyzické tiskárny jsou založeny na přednastavení, které se " +"chystáte odstranit." +msgstr[3] "" +"Níže uvedené fyzické tiskárny jsou založeny na přednastavení, které se " +"chystáte odstranit." + +msgid "" +"The physical printer below is based only on the preset, you are going to " +"delete." +msgid_plural "" +"The physical printers below are based only on the preset, you are going to " +"delete." +msgstr[0] "" +"Níže uvedená fyzická tiskárna je založená pouze na přednastavení, které se " +"chystáte odstranit." +msgstr[1] "" +"Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " +"chystáte odstranit." +msgstr[2] "" +"Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " +"chystáte odstranit." +msgstr[3] "" +"Níže uvedené fyzické tiskárny jsou založeny pouze na přednastavení, které se " +"chystáte odstranit." + +msgid "" +"The places where the brim will be printed around each object on the first " +"layer." +msgstr "Místa, kde bude kolem každého objektu v první vrstvě vytištěn límec." + +msgid "" +"The preset below was temporarily installed on the active instance of " +"PrusaSlicer" +msgid_plural "" +"The presets below were temporarily installed on the active instance of " +"PrusaSlicer" +msgstr[0] "" +"Níže uvedené přednastavení bylo dočasně nainstalováno do aktivní instance " +"PrusaSliceru" +msgstr[1] "" +"Níže uvedená přednastavení byla dočasně nainstalována do aktivní instance " +"PrusaSliceru" +msgstr[2] "" +"Níže uvedená přednastavení byla dočasně nainstalována do aktivní instance " +"PrusaSliceru" +msgstr[3] "" +"Níže uvedená přednastavení byla dočasně nainstalována do aktivní instance " +"PrusaSliceru" + +msgid "The preset modifications are successfully saved" +msgid_plural "The presets modifications are successfully saved" +msgstr[0] "Úpravy přednastavení jsou úspěšně uloženy" +msgstr[1] "Úpravy přednastavení jsou úspěšně uloženy" +msgstr[2] "Úpravy přednastavení jsou úspěšně uloženy" +msgstr[3] "Úpravy přednastavení jsou úspěšně uloženy" + +msgid "The provided file name is not valid." +msgstr "Zadaný název je neplatný." + +msgid "The provided name is not valid;" +msgstr "Zadaný název není platný;" + +msgid "" +"The selected 3MF contains FDM supports painted object using a newer version " +"of PrusaSlicer and is not compatible." +msgstr "" +"Vybraný 3MF soubor obsahuje objekt s namalovanými podpěrami novější verze " +"PrusaSliceru a proto není kompatibilní." + +msgid "" +"The selected 3MF contains multi-material painted object using a newer " +"version of PrusaSlicer and is not compatible." +msgstr "" +"Vybraný 3MF soubor obsahuje objekt multimateriálovým malováním pomocí " +"novější verze PrusaSliceru a proto není kompatibilní." + +msgid "" +"The selected 3MF contains seam painted object using a newer version of " +"PrusaSlicer and is not compatible." +msgstr "" +"Vybraný 3MF soubor obsahuje objekt s namalovaný švem pomocí novější verze " +"PrusaSliceru a proto není kompatibilní." + +msgid "" +"The selected object couldn't be split because it contains only one solid " +"part." +msgstr "" +"Vybraný objekt nebylo možné rozdělit, protože obsahuje pouze jednu část." + +msgid "" +"The sequential print is on.\n" +"It's impossible to apply any custom G-code for objects printing sequentually." +msgstr "" +"Sekvenční tisk je zapnutý.\n" +"Pro objekty tisknuté sekvenčním tiskem nelze použít žádný vlastní G-code." + +msgid "The size of the object is zero" +msgstr "Velikost objektu je nulová" + +msgid "" +"The SLA archive doesn't contain any presets. Please activate some SLA " +"printer preset first before importing that SLA archive." +msgstr "" +"SLA archiv neobsahuje žádné přednastavení. Před importem tohoto SLA archivu " +"nejprve aktivujte některé přednastavení SLA tiskárny." + +msgid "" +"The vertical distance between object and raft. Ignored for soluble interface." +msgstr "" +"Verikální vzdálenost mezi objektem a raftem. Ignorováno pro rozpustné " +"podpěry." + +msgid "There is an object with no extrusions in the first layer." +msgstr "Je zde objekt, který nemá v první vrstvě žádné extrudování." + +msgid "" +"This action is not revertible.\n" +"Do you want to proceed?" +msgstr "" +"Tato akce není vratná.\n" +"Chcete pokračovat?" + +msgid "This action will cause deletion of all ticks on vertical slider." +msgstr "Tato akce způsobí odstranění všech značek na vertikálním posuvníku." + +msgid "" +"This file contains several objects positioned at multiple heights.\n" +"Instead of considering them as multiple objects, should \n" +"the file be loaded as a single object having multiple parts?" +msgstr "" +"Tento soubor obsahuje několik objektů umístěných v různých výškách.\n" +"Místo toho, aby se s nimi pracovalo jako se separátními objekty, \n" +"mají být načteny jako jeden objekt, který má více částí?" + +msgid "This is wipe tower layer" +msgstr "Toto je vrstva čistící věže" + +msgid "" +"This may cause problems in g-code visualization and printing time estimation." +msgstr "Může to způsobit problémy při vizualizaci g-codu a odhadu doby tisku." + +msgid "Tool type" +msgstr "Typ nástroje" + +msgid "Top interface layers" +msgstr "Vrchní kontaktní vrstvy" + +msgid "Total" +msgstr "Celkem" + +msgid "Unable to drill the current configuration of holes into the model." +msgstr "Nelze vyvrtat aktuální konfiguraci otvorů do modelu." + +msgid "Unable to replace with more than one volume" +msgstr "Nelze nahradit více než jednou částí" + +msgid "Undef category" +msgstr "Nedefinovaná kategorie" + +msgid "Undef group" +msgstr "Nedefinovaná skupina" + +msgid "Underflow" +msgstr "Podtečení" + +msgid "Undo / Redo is processing" +msgstr "Zpět / Vpřed se zpracovává" + +msgid "Undo desktop integration failed." +msgstr "Zrušení integrace do systému se nepodařilo." + +msgid "Undo desktop integration was successful." +msgstr "Zrušení integrace do systému proběhlo úspěšně." + +msgid "Unsaved Changes" +msgstr "Neuložené změny" + +msgid "Untitled" +msgstr "Bez názvu" + +msgid "Updating" +msgstr "Probíhá aktualizace" + +msgid "Upload" +msgstr "Nahrát" + +msgid "Upload and Print" +msgstr "Nahrát a Tisknout" + +msgid "Upload and Simulate" +msgstr "Nahrát a simulovat" + +msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" +msgstr "Název nahrávaného souboru nekončí \"%s\". Chcete pokračovat?" + +msgid "" +"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to " +"close all holes in the model." +msgstr "" +"Pro modely letadel 3DLabPrint použijte \"Paritní vyplňování\". Použijte " +"\"Uzavírání děr\" pro uzavření všech otvorů v modelu." + +msgid "Use colors for axes values in Manipulation panel" +msgstr "Podbarvení hodnot os v panelu Manipulace s objektem" + +msgid "Use system menu for application" +msgstr "V PrusaSliceru používat systémové nabídky" + +msgid "Used filament" +msgstr "Použito filamentu" + +msgid "Whole word" +msgstr "Celé slovo" + +msgid "" +"With draft shield active, the skirt will be printed skirt_distance from the " +"object, possibly intersecting brim.\n" +"Enabled = skirt is as tall as the highest printed object.\n" +"Limited = skirt is as tall as specified by skirt_height.\n" +"This is useful to protect an ABS or ASA print from warping and detaching " +"from print bed due to wind draft." +msgstr "" +"Při ochranném štítu proti průvanu se obrys vytiskne ve vzdálenosti " +"skirt_distance od objektu, případně protíná límec.\n" +"Povoleno = obrys je stejně vysoký jako nejvyšší tištěný objekt.\n" +"Omezeno = obrys je tak vysoký, jak určuje výška skirt_height.\n" +"To je užitečné pro ochranu modelu z ABS nebo ASA před deformací a odlepením " +"od tiskové podložky v důsledku průvanu." + +msgid "" +"You are currently editing SLA support points. Please, apply or discard your " +"changes first." +msgstr "" +"Právě upravujete SLA podpěrné body. Změny nejprve aplikujte nebo zahoďte." + +msgid "You are opening %1% version %2%." +msgstr "Otevíráte %1% verze %2%." + +msgid "You can keep presets modifications to the new project or discard them" +msgstr "Úpravy přednastavení můžete v novém projektu ponechat nebo je zahodit" + +msgid "" +"You can keep presets modifications to the new project, discard them or save " +"changes as new presets.\n" +"Note, if changes will be saved then new project wouldn't keep them" +msgstr "" +"Změny přednastavení můžete v novém projektu ponechat, zahodit je nebo uložit " +"jako nové přednastavení.\n" +"Pamatuje, že pokud budou změny uloženy, nový projekt je nezachová" msgid "" -"Zoom to selected object\n" -"or all objects in scene, if none selected" +"You will be notified about new release after startup acordingly: All = " +"Regular release and alpha / beta releases. Release only = regular release." msgstr "" -"Pohled na označený objekt, nebo na všechny objekty ve scéně,\n" -"pokud není vybraný žádný objekt" +"Po spuštění budete informováni o nové verzi: Všechny = stabilní verze a " +"alfa / beta verze. Pouze stabilní verze = pravidelné stabilní verze." -msgid "°C" -msgstr "°C" +msgid "You will not be asked about it again on hyperlinks hovering." +msgstr "Nebudete znovu dotázáni při najetí myší na odkazy." -msgid "Fill pattern" -msgstr "Vzor výplně" +msgid "" +"You will not be asked about the unsaved changes in presets the next time you " +"create new project" +msgstr "" +"Při příštím vytvoření nového projektu nebudete dotázáni na neuložené změny " +"přednastavení" -msgid "Advanced View Mode" -msgstr "Pokročilý režim" +msgid "" +"You will not be asked about the unsaved changes in presets the next time you " +"switch a preset" +msgstr "" +"Při příštím přepnutí přednastavení nebudete dotázáni na neuložené změny " +"přednastavení" msgid "Aligned Rectilinear" msgstr "Zarovnaný přímočarý" @@ -9465,12 +15292,6 @@ msgstr "" "- zavírání PrusaSliceru,\n" "- načítání nebo vytváření nového projektu." -msgid "Around object" -msgstr "Okolo objektu" - -msgid "Below object" -msgstr "Pod objektem" - msgid "" "Changing some options will trigger application restart.\n" "You will lose the content of the plater." @@ -9478,49 +15299,12 @@ msgstr "" "Změnou nastavení se aplikace restartuje.\n" "Ztratíte objekty na tiskové podložce." -msgid "Everywhere" -msgstr "Všude" - -msgid "Expert" -msgstr "Expert" - -msgid "Expert View Mode" -msgstr "Režim Expert" - -msgid "Fill pattern for general low-density infill." -msgstr "Vzor výplně pro obecnou výplň s nízkou hustotou." - -msgid "" -"Fill pattern for top infill. This only affects the top visible layer, and " -"not its adjacent solid shells." -msgstr "" -"Nastavte vzor pro horní výplň. Ovlivňuje pouze horní viditelnou vrstvu a ne " -"její sousední plné vrstvy." - -msgid "For support enforcers only" -msgstr "Pouze pro vynucené podpěry" - -msgid "Layout Options" -msgstr "Možnosti rozložení" - msgid "PrusaSlicer will remember your choice." msgstr "PrusaSlicer si zapamatuje vaši volbu." msgid "PrusaSlicer: Don't ask me again" msgstr "PrusaSlicer: Již se znavu neptat" -msgid "Select what kind of pad do you need" -msgstr "Vyberte, jaký typ podložky potřebujete" - -msgid "Select what kind of support do you need" -msgstr "Vyberte typ podpěr, které potřebujete" - -msgid "Simple" -msgstr "Jednoduchý" - -msgid "Simple View Mode" -msgstr "Jednoduchý režim" - msgid "" "The plater is empty.\n" "Do you want to save the project?" @@ -9528,13 +15312,6 @@ msgstr "" "Tisková podložka je prázdná.\n" "Chcete projekt uložit?" -msgid "" -"This flag enables the brim that will be printed around each object on the " -"first layer." -msgstr "" -"Tato vlajka zapíná límec, který bude vytištěn kolem každého objektu při " -"první vrstvě." - msgid "" "You will not be asked about it again, when: \n" "- Closing PrusaSlicer,\n" @@ -14573,9 +20350,6 @@ msgstr "XPM: ořezaná data obrázku na řádku %d!" msgid "Yellow" msgstr "Žlutá" -msgid "Yes" -msgstr "Ano" - msgid "You cannot Clear an overlay that is not inited" msgstr "Nemůžete použít Clear pro překrytí, které není inicializované" @@ -15192,9 +20966,6 @@ msgstr "" "abyste zkrátili dobu tisku a snížili spotřebu filamentu? Přečtěte si více v " "dokumentaci." -msgid "Add modifier" -msgstr "Přidat modifikátor" - msgid "" "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r " "keeps adding perimeters, until more than 70% of the loop immediately above " @@ -15207,21 +20978,12 @@ msgstr "" msgid "Add negative volume" msgstr "Přidat negativní objem" -msgid "Add one more instance of the selected object" -msgstr "Přidejte jednu nebo více instancí vybraného objektu" - msgid "Add one or more custom shapes" msgstr "Přidání jednoho nebo více vlastních tvarů" -msgid "Add part" -msgstr "Přidat díl" - msgid "Add selected shape(s) to the bed" msgstr "Přidat vybraný tvar(y) na podložku" -msgid "Add settings" -msgstr "Přidat nastavení" - msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." @@ -15229,27 +20991,12 @@ msgstr "" "Přidá plnou výplň u šikmých ploch pro garanci tloušťky svislých stěn " "(vrchních a spodních plných vrstev)." -msgid "Add support blocker" -msgstr "Přidat blokátor podpěr" - -msgid "Add support enforcer" -msgstr "Přidat vynucení podpěr" - msgid "Add to bed" msgstr "Přidat na podložku" msgid "Allow just a single PrusaSlicer instance" msgstr "Povolit pouze jednu instanci PrusaSliceru" -msgid "Along X axis" -msgstr "Podél osy X" - -msgid "Along Y axis" -msgstr "Podél osy Y" - -msgid "Along Z axis" -msgstr "Podél osy Z" - msgid "" "Always ask for unsaved changes in presets, when: \n" "- Closing PrusaSlicer while some presets are modified,\n" @@ -15316,9 +21063,6 @@ msgstr "Blacklistované knihovny byly načteny do procesu PrusaSlicer:" msgid "Bottom contact Z distance" msgstr "Mezera pod podpěrami v ose Z" -msgid "Box" -msgstr "Kostka" - msgid "" "Box selection\n" "Did you know that you can do a box selection with Shift+Mouse drag? You can " @@ -15356,15 +21100,9 @@ msgstr "" msgid "Can't apply when proccess preview." msgstr "Nelze použít při náhledu procesu." -msgid "Change the number of instances of the selected object" -msgstr "Změní počet instancí vybraného objektu" - msgid "Change thumbnail" msgstr "Změnit náhled" -msgid "Change type" -msgstr "Změnit typ" - msgid "Choose one or more files (STL, OBJ):" msgstr "Vyberte jeden nebo více souborů (STL, OBJ):" @@ -15518,12 +21256,6 @@ msgstr "" "CURL init selhal. PrusaSlicer nebude schopen navázat síťová připojení. Další " "podrobnosti najdete v logu." -msgid "Current mode is %s" -msgstr "Aktuální režim je %s" - -msgid "Cylinder" -msgstr "Válec" - msgid "Data to send" msgstr "Data k odeslání" @@ -15694,9 +21426,6 @@ msgstr "" "Experimentální volba pro nastavení průtoku pro přesahy (použije se průtok " "jako u mostů), aplikuje se na ně rychlost mostu a spustí se ventilátor." -msgid "Export as STL" -msgstr "Exportovat jako STL" - msgid "Extra high" msgstr "Extra vysoká" @@ -15725,12 +21454,6 @@ msgstr "Ventilátor vždy poběží na %1%%%" msgid "Fan will be turned off." msgstr "Ventilátor bude vypnutý." -msgid "FFF Technology Printers" -msgstr "Tiskárny technologie FFF" - -msgid "Fill bed with instances" -msgstr "Vyplnit tiskovou plochu instancemi" - msgid "Fill gaps" msgstr "Vyplnit mezery" @@ -15741,9 +21464,6 @@ msgstr "" "Vzor výplně pro spodní vrstvy. Ovlivňuje pouze spodní vnější viditelné " "vrstvy. Neovlivňuje následné plné vrstvy." -msgid "Fill the remaining area of bed with instances of the selected object" -msgstr "Vyplní zbývající tiskovou plochu instancemi vybraného objektu" - msgid "Filling bed" msgstr "Vyplňování podložky" @@ -15753,9 +21473,6 @@ msgstr "První barva" msgid "First layer height can't be greater than nozzle diameter" msgstr "Výška první vrstvy nesmí být větší než průměr trysky" -msgid "Fix through the Netfabb" -msgstr "Opravit pomocí služby Netfabb" - msgid "flow rate is maximized" msgstr "průtok je maximalizován" @@ -15801,9 +21518,6 @@ msgstr "" msgid "Height of skirt expressed in layers." msgstr "Výška obrysu vyjádřená ve vrstvách." -msgid "Height range Modifier" -msgstr "Modifikátor Výškového rozsahu" - msgid "Heights at which a filament change is to occur." msgstr "Výšky, při kterých má dojít ke změně filamentu." @@ -16084,9 +21798,6 @@ msgstr "" msgid "Medium" msgstr "Střední" -msgid "Merge objects to the one multipart object" -msgstr "Sloučit objekty do jednoho vícedílného objektu" - msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." @@ -16139,21 +21850,6 @@ msgstr "" "verzi? Klepněte na model pravým tlačítkem myši, vyberte možnost Zrcadlit a " "vyberte osu zrcadlení." -msgid "Mirror" -msgstr "Zrcadlit" - -msgid "Mirror the selected object" -msgstr "Zrcadlit vybraný objekt" - -msgid "Mirror the selected object along the X axis" -msgstr "Zrcadlit rozměr vybraného objektu podél osy X" - -msgid "Mirror the selected object along the Y axis" -msgstr "Zrcadlit rozměr vybraného objektu podél osy Y" - -msgid "Mirror the selected object along the Z axis" -msgstr "Zrcadlit rozměr vybraného objektu podél osy Z" - msgid "" "Most likely the configuration was produced by a newer version of PrusaSlicer " "or by some PrusaSlicer fork." @@ -16413,9 +22109,6 @@ msgstr "" msgid "Pre&view" msgstr "&Náhled" -msgid "Printable" -msgstr "Tisknout objekt" - msgid "" "Printable toggle\n" "Did you know that you can disable the G-code generation for the selected " @@ -16440,12 +22133,6 @@ msgstr "" msgid "Prusa 3D &Drivers" msgstr "Prusa 3&D Ovladače" -msgid "Prusa FFF Technology Printers" -msgstr "Prusa tiskárny technologie FFF" - -msgid "Prusa MSLA Technology Printers" -msgstr "Prusa tiskárny technologie MSLA" - msgid "" "PrusaSlicer crashed last time when attempting to set window position.\n" "We are sorry for the inconvenience, it unfortunately happens with certain " @@ -16544,9 +22231,6 @@ msgstr "" msgid "Quality (slower slicing)" msgstr "Kvalita (pomalejší slicing)" -msgid "Quick Add Settings (%s)" -msgstr "Rychlé přidání nastavení (%s)" - msgid "Recommended object thin wall thickness for layer height %.2f and" msgstr "Doporučená tloušťka stěny objektu pro výšku vrstvy %.2f a" @@ -16572,35 +22256,15 @@ msgstr "" msgid "Reload plater from disk" msgstr "Znovu načíst podložku z disku" -msgid "Reload the selected volumes from disk" -msgstr "Znovu načíst vybrané objekty z disku" - -msgid "Remove one instance of the selected object" -msgstr "Odebere jednu instanci vybraného objektu" - msgid "Remove painted color" msgstr "Odbarvení" -msgid "Remove the selected object" -msgstr "Odstranit vybraný objekt" - -msgid "Rename" -msgstr "Přejmenovat" - msgid "Replace the selected volume with new STL" msgstr "Nahradit vybraný objekt novým STL souborem" msgid "Replacing of the PNG" msgstr "Výměna PNG" -msgid "Scale the selected object to fit the print volume" -msgstr "" -"Přizpůsobit měřítko vybraného objektu, aby se objekt vešel do tiksového " -"objemu" - -msgid "Scale to print volume" -msgstr "Změnit velikost podle tiskového objemu" - msgid "" "Search functionality\n" "Did you know that you use theSearchtool to quickly find a specific " @@ -16623,9 +22287,6 @@ msgstr "Zobrazit panel Podložka" msgid "Select shape from the gallery" msgstr "Vyberte tvar z galerie" -msgid "Select showing settings" -msgstr "Zvolte nastavení zobrazení" - msgid "Send system info" msgstr "Odeslat systémové informace" @@ -16638,15 +22299,6 @@ msgstr "Odesílání systémových informací bylo zrušeno." msgid "Sending system info..." msgstr "Odesílání systémových informací..." -msgid "Set as a Separated Object" -msgstr "Změnit na samostatný objekt" - -msgid "Set as a Separated Objects" -msgstr "Převést na oddělené objekty" - -msgid "Set extruder for selected items" -msgstr "Zvolte extruder pro vybrané položky" - msgid "" "Set number of instances\n" "Did you know that you can right-click a model and set an exact number of " @@ -16656,9 +22308,6 @@ msgstr "" "Věděli jste, že můžete kliknout pravým tlačítkem myši na model a nastavit " "přesný počet instancí, místo abyste jej museli několikrát kopírovat?" -msgid "Set number of instances" -msgstr "Zadat počet instancí" - msgid "" "Set this to a non-zero value to allow a manual extrusion width. If left to " "zero, Slic3r derives extrusion widths from the nozzle diameter (see the " @@ -16829,12 +22478,6 @@ msgstr "" msgid "Simplify model" msgstr "Zjednodušit model" -msgid "SLA Technology Printers" -msgstr "Tiskárny technologie SLA" - -msgid "Slab" -msgstr "Deska" - msgid "Slic3r will not scale speed down below this speed." msgstr "Slic3r nebude měnit rychlost pod tuto rychlost." @@ -16884,9 +22527,6 @@ msgstr "" "Rychlost pro perimetry (obrysy, neboli svislé stěny). Zadejte nulu pro " "automatické nastavení." -msgid "Speed for printing bridges." -msgstr "Rychlost pro vytváření mostů." - msgid "" "Speed for printing solid regions (top/bottom/internal horizontal shells). " "This can be expressed as a percentage (for example: 80%) over the default " @@ -16896,17 +22536,6 @@ msgstr "" "Může být vyjádřeno procenty (například: 80%) oproti výchozí rychlosti " "vyplnění. Pro automatické nastavení zadejte nulu." -msgid "" -"Speed for printing support material interface layers. If expressed as " -"percentage (for example 50%) it will be calculated over support material " -"speed." -msgstr "" -"Rychlost tisku podpěrných interface vrstev. Pokud je vyjádřen procentní " -"podíl (například 50%), vypočítá se podle rychlosti tisku podpěr." - -msgid "Speed for printing support material." -msgstr "Rychlost tisku podpěr." - msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "Rychlost tisku vnitřní výplně. Pro automatické nastavení zadejte nulu." @@ -16948,12 +22577,6 @@ msgstr "" msgid "Split bigger facets into smaller ones while the object is painted." msgstr "Během malování objektu rozdělí větší fasety na menší." -msgid "Split the selected object" -msgstr "Rozdělit vybraný objekt" - -msgid "Split the selected object into individual objects" -msgstr "Rozdělit vybraný objekt na jednotlivé objekty" - msgid "Split the selected object into individual parts" msgstr "Rozdělit vybraný objekt na jednotlivé části" @@ -16986,9 +22609,6 @@ msgstr "Přepnout do 3D" msgid "Switch to Preview" msgstr "Přepnout do náhledu" -msgid "Switch to the %s mode" -msgstr "Přepnout do režimu %s" - msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." @@ -17236,13 +22856,6 @@ msgstr "" "Tento kód je vložen na konec výstupního souboru. Můžete také přidávat " "zástupné proměnné pro veškeré nastavení PrusaSliceru." -msgid "" -"This experimental setting is used to set the maximum volumetric speed your " -"extruder supports." -msgstr "" -"Toto experimentální nastavení slouží k nastavení maximální objemové " -"rychlosti, kterou váš extruder podporuje." - msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " @@ -17258,17 +22871,6 @@ msgstr "" "průměru filamentu přidruženého k vybranému filamentu ve Slic3ru. Toto je " "podporováno pouze v posledních verzích firmwaru Marlin." -msgid "" -"This factor affects the amount of plastic for bridging. You can decrease it " -"slightly to pull the extrudates and prevent sagging, although default " -"settings are usually good and you should experiment with cooling (use a fan) " -"before tweaking this." -msgstr "" -"Tato hodnota určuje množství vytlačeného plastu při vytváření mostů. Mírným " -"snížením této hodnoty můžete předejít pronášení, i když přednastavené " -"hodnoty jsou většinou dobré a je lepší experimentovat s chlazením (využitím " -"ventilátoru) než s touto hodnotou." - msgid "This fan speed is enforced during all bridges and overhangs." msgstr "" "Nastavená rychlost ventilátoru je využita vždy při vytváření mostů a přesahů." @@ -17501,12 +23103,6 @@ msgstr "" "s flexibilními materiály, které potřebují více času ke smrštění na původní " "rozměry." -msgid "To objects" -msgstr "Na objekty" - -msgid "To parts" -msgstr "Na části" - msgid "Top contact Z distance" msgstr "Mezera nad podpěrami v ose Z" -- cgit v1.2.3 From a91ef83f9ec592f82c125f890978c004dd59b2c6 Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 15:39:42 +0200 Subject: Fix crashing gcode when seam_gap is null and wipe inside is activated supermerill/SuperSlicer#2850 --- src/libslic3r/GCode.cpp | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index 064c9266b..dfd110855 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -3415,7 +3415,7 @@ std::string GCode::extrude_loop_vase(const ExtrusionLoop &original_loop, const s ExtrusionPaths &paths = loop_to_seam.paths; if (false && m_enable_loop_clipping && m_writer.tool_is_extruder()) { coordf_t clip_length = scale_(m_config.seam_gap.get_abs_value(m_writer.tool()->id(), EXTRUDER_CONFIG_WITH_DEFAULT(nozzle_diameter, 0))); - coordf_t min_clip_length = scale_(EXTRUDER_CONFIG_WITH_DEFAULT(nozzle_diameter, 0)) * 0.15; + coordf_t min_clip_length = scale_(EXTRUDER_CONFIG_WITH_DEFAULT(nozzle_diameter, 0)) * 0.15; // get paths ExtrusionPaths clipped; @@ -3848,15 +3848,19 @@ std::string GCode::extrude_loop(const ExtrusionLoop &original_loop, const std::s std::string gcode; - // generate the unretracting/wipe start move (same thign than for the end, but on the other side) + // generate the unretracting/wipe start move (same thing than for the end, but on the other side) assert(!paths.empty() && paths.front().size() > 1 && !paths.back().empty()); - if (EXTRUDER_CONFIG_WITH_DEFAULT(wipe_inside_start, true) && !paths.empty() && paths.front().size() > 1 && !paths.back().empty() && paths.front().role() == erExternalPerimeter) { + if (EXTRUDER_CONFIG_WITH_DEFAULT(wipe_inside_start, true) && !paths.empty() && paths.front().size() > 1 && paths.back().size() > 1 && paths.front().role() == erExternalPerimeter) { //note: previous & next are inverted to extrude "in the opposite direction, ans we are "rewinding" //Point previous_point = paths.back().polyline.points.back(); Point previous_point = paths.front().polyline.points[1]; Point current_point = paths.front().polyline.points.front(); //Point next_point = paths.front().polyline.points[1]; Point next_point = paths.back().polyline.points.back(); + if (next_point == current_point) { + //can happen if seam_gap is null + next_point = paths.back().polyline.points[paths.back().polyline.points.size()-2]; + } Point a = next_point; // second point Point b = previous_point; // second to last point if (is_hole_loop ? (!is_full_loop_ccw) : (is_full_loop_ccw)) { -- cgit v1.2.3 From fcfd7e5a3bf4a8a440b6bf19a179a61d78cf091d Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 15:55:52 +0200 Subject: fix bridge_flow only affecting bridge with "nozzle" base type supermerill/SuperSlicer#2837 --- src/libslic3r/Fill/Fill.cpp | 9 +++++---- src/libslic3r/LayerRegion.cpp | 11 ++++++----- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/src/libslic3r/Fill/Fill.cpp b/src/libslic3r/Fill/Fill.cpp index 0aa41de77..2fcf9317b 100644 --- a/src/libslic3r/Fill/Fill.cpp +++ b/src/libslic3r/Fill/Fill.cpp @@ -198,15 +198,16 @@ std::vector group_fills(const Layer &layer) // layerm.flow(extrusion_role, (surface.thickness == -1) ? layer.height : surface.thickness); if (is_bridge) { float nozzle_diameter = layer.object()->print()->config().nozzle_diameter.get_at(layerm.region().extruder(extrusion_role, *layer.object()) - 1); + double diameter = 0; if (region_config.bridge_type == BridgeType::btFromFlow) { Flow reference_flow = layerm.flow(FlowRole::frSolidInfill); - double diameter = sqrt(4 * reference_flow.mm3_per_mm() / PI); - params.flow = Flow::bridging_flow(float(diameter), nozzle_diameter); + diameter = sqrt(4 * reference_flow.mm3_per_mm() / PI); } else if (region_config.bridge_type == BridgeType::btFromHeight) { - params.flow = Flow::bridging_flow(float(layerm.layer()->height), nozzle_diameter); + diameter = layerm.layer()->height; } else /*if (region_config.bridge_type == BridgeType::btFromNozzle)*/ { - params.flow = Flow::bridging_flow(nozzle_diameter * std::sqrt(region_config.bridge_flow_ratio.get_abs_value(1)), nozzle_diameter); + diameter = nozzle_diameter; } + params.flow = Flow::bridging_flow((float)(diameter * std::sqrt(region_config.bridge_flow_ratio.get_abs_value(1))), nozzle_diameter); } else params.flow = layerm.region().flow( *layer.object(), diff --git a/src/libslic3r/LayerRegion.cpp b/src/libslic3r/LayerRegion.cpp index 2e7bc10c2..4f4177967 100644 --- a/src/libslic3r/LayerRegion.cpp +++ b/src/libslic3r/LayerRegion.cpp @@ -32,19 +32,20 @@ Flow LayerRegion::bridging_flow(FlowRole role) const const PrintRegionConfig ®ion_config = region.config(); const PrintObject &print_object = *this->layer()->object(); // Here this->extruder(role) - 1 may underflow to MAX_INT, but then the get_at() will follback to zero'th element, so everything is all right. - auto nozzle_diameter = float(print_object.print()->config().nozzle_diameter.get_at(region.extruder(role, *this->layer()->object()) - 1)); + float nozzle_diameter = float(print_object.print()->config().nozzle_diameter.get_at(region.extruder(role, *this->layer()->object()) - 1)); + double diameter = 0; if (region_config.bridge_type == BridgeType::btFromFlow) { Flow reference_flow = flow(role); - double diameter = sqrt(4 * reference_flow.mm3_per_mm() / PI); - return Flow::bridging_flow(float(diameter), nozzle_diameter); + diameter = sqrt(4 * reference_flow.mm3_per_mm() / PI); } else if (region_config.bridge_type == BridgeType::btFromHeight) { - return Flow::bridging_flow(float(m_layer->height), nozzle_diameter); + diameter = m_layer->height; } else /*if (region_config.bridge_type == BridgeType::btFromNozzle)*/ { // The good Slic3r way: Use rounded extrusions. // Get the configured nozzle_diameter for the extruder associated to the flow role requested. // Applies default bridge spacing. - return Flow::bridging_flow(float(sqrt(region_config.bridge_flow_ratio.get_abs_value(1.))) * nozzle_diameter, nozzle_diameter); + diameter = nozzle_diameter; } + return Flow::bridging_flow(float(sqrt(region_config.bridge_flow_ratio.get_abs_value(1.)) * diameter) , nozzle_diameter); /* else { // The same way as other slicers: Use normal extrusions. Apply bridge_flow_ratio while maintaining the original spacing. return this->flow(role).with_flow_ratio(region_config.bridge_flow_ratio, overlap_percent); -- cgit v1.2.3 From d36349908bbe075888079807f5ff9d3ad048fd5d Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 16:32:13 +0200 Subject: remove usage of GetCurrentlySelectedFilterIndex for linux as it's not available (and too recent for stable wxwidget) supermerill/SuperSlicer#2832 --- src/slic3r/GUI/Plater.cpp | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index 0173d7daa..eb08b61d3 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -5933,7 +5933,7 @@ public: bool with_modifers() { return m_with_modifiers->GetValue(); } bool with_config() { return m_with_config->GetValue(); } private: - +#ifndef __linux__ void OnUpdateLabelUI(wxUpdateUIEvent& event) { wxFileDialogBase* const dialog = wxStaticCast(GetParent(), wxFileDialogBase); @@ -5945,6 +5945,7 @@ private: m_with_modifiers->Enable(filter > 0); m_with_config->Enable(filter == 1); } +#endif wxCheckBox* m_with_supports; wxCheckBox* m_sel_only; @@ -5960,12 +5961,19 @@ OptionForExportPlatter::OptionForExportPlatter(wxWindow* parent) m_with_modifiers = new wxCheckBox(this, -1, _L("Include modifiers")); m_with_config = new wxCheckBox(this, -1, _L("Include presets")); + m_with_supports->SetToolTip("Only for sla printers"); + m_sel_only->SetToolTip("Only when an object is selected"); + m_with_modifiers->SetToolTip("Only for 3mf and amf"); + m_with_config->SetToolTip("Only for 3mf"); + m_with_supports->Enable(OptionForExportPlatter_can_support); m_sel_only->Enable(OptionForExportPlatter_can_select); +#ifndef __linux__ m_with_modifiers->Enable(false); m_with_config->Enable(false); this->Bind(wxEVT_UPDATE_UI, &OptionForExportPlatter::OnUpdateLabelUI, this); +#endif wxBoxSizer* sizerTop = new wxBoxSizer(wxHORIZONTAL); sizerTop->Add(m_with_supports, wxSizerFlags().Centre().Border()); @@ -6026,9 +6034,9 @@ void Plater::export_platter() wxGetApp().app_config->update_last_output_dir(path.parent_path().string()); std::string path_u8 = into_u8(out_path); - if (dlg.GetCurrentlySelectedFilterIndex() == 0) { + if (dlg.GetFilterIndex() == 0) { this->export_stl(path_u8, extra_options->with_support(), extra_options->only_selection()); - } else if (dlg.GetCurrentlySelectedFilterIndex() > 0) { + } else if (dlg.GetFilterIndex() > 0) { //export 3mf wxBusyCursor wait; @@ -6078,7 +6086,7 @@ void Plater::export_platter() } } DynamicPrintConfig full_config = wxGetApp().preset_bundle->full_config_secure(); - if (dlg.GetCurrentlySelectedFilterIndex() == 1) { + if (dlg.GetFilterIndex() == 1) { //thumbnail ThumbnailData thumbnail_data; @@ -6108,7 +6116,7 @@ void Plater::export_platter() .set_export_config(extra_options->with_config()) .set_export_modifiers(extra_options->with_modifers()) ); - } else if (dlg.GetCurrentlySelectedFilterIndex() == 2) { + } else if (dlg.GetFilterIndex() == 2) { //store amf bool ret = Slic3r::store_amf(path_u8, &model_to_save, -- cgit v1.2.3 From 77a124d1ee001852a0dec050aa444ee03d9f7e1e Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 17:29:30 +0200 Subject: new option to ignore "only retract when crossing" on the first layer. supermerill/SuperSlicer#2361 supermerill/SuperSlicer#2836 --- resources/ui_layout/default/print.ui | 5 ++++- resources/ui_layout/example/print.ui | 5 ++++- src/libslic3r/GCode.cpp | 4 ++-- src/libslic3r/Preset.cpp | 6 ++++-- src/libslic3r/Print.cpp | 1 + src/libslic3r/PrintConfig.cpp | 10 +++++++++- src/libslic3r/PrintConfig.hpp | 1 + 7 files changed, 25 insertions(+), 7 deletions(-) diff --git a/resources/ui_layout/default/print.ui b/resources/ui_layout/default/print.ui index b61cba944..b61c33748 100644 --- a/resources/ui_layout/default/print.ui +++ b/resources/ui_layout/default/print.ui @@ -175,7 +175,10 @@ group:sidetext_width$5:Advanced setting:label_width$8:width$5:external_infill_margin setting:label_width$6:width$5:bridged_infill_margin end_line - setting:only_retract_when_crossing_perimeters + line:Only retract when crossing perimeters + setting:label_width$0:label$_:only_retract_when_crossing_perimeters + setting:enforce_retract_first_layer + end_line setting:infill_first group:Advanced Infill options line:Ironing infill pattern tuning diff --git a/resources/ui_layout/example/print.ui b/resources/ui_layout/example/print.ui index b61cba944..b61c33748 100644 --- a/resources/ui_layout/example/print.ui +++ b/resources/ui_layout/example/print.ui @@ -175,7 +175,10 @@ group:sidetext_width$5:Advanced setting:label_width$8:width$5:external_infill_margin setting:label_width$6:width$5:bridged_infill_margin end_line - setting:only_retract_when_crossing_perimeters + line:Only retract when crossing perimeters + setting:label_width$0:label$_:only_retract_when_crossing_perimeters + setting:enforce_retract_first_layer + end_line setting:infill_first group:Advanced Infill options line:Ironing infill pattern tuning diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index dfd110855..5f49f5235 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -5145,7 +5145,7 @@ Polyline GCode::travel_to(std::string &gcode, const Point &point, ExtrusionRole // check whether a straight travel move would need retraction bool needs_retraction = this->needs_retraction(travel, role); - if (m_config.only_retract_when_crossing_perimeters) + if (m_config.only_retract_when_crossing_perimeters && !(m_config.enforce_retract_first_layer && m_layer_index == 0)) needs_retraction = needs_retraction && will_cross_perimeter; // Re-allow avoid_crossing_perimeters for the next travel moves @@ -5296,7 +5296,7 @@ bool GCode::needs_retraction(const Polyline& travel, ExtrusionRole role /*=erNon bool GCode::can_cross_perimeter(const Polyline& travel, bool offset) { if(m_layer != nullptr) - if ( (m_config.only_retract_when_crossing_perimeters && m_config.fill_density.value > 0) || m_config.avoid_crossing_perimeters) + if ( ( (m_config.only_retract_when_crossing_perimeters && !(m_config.enforce_retract_first_layer && m_layer_index == 0)) && m_config.fill_density.value > 0) || m_config.avoid_crossing_perimeters) { //test && m_layer->any_internal_region_slice_contains(travel) // Skip retraction if travel is contained in an internal slice *and* diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp index 09cdf5776..aa33fb602 100644 --- a/src/libslic3r/Preset.cpp +++ b/src/libslic3r/Preset.cpp @@ -499,8 +499,10 @@ static std::vector s_Preset_print_options { "ironing_angle", "fill_angle", "fill_angle_increment", - "bridge_angle", - "solid_infill_below_area", "only_retract_when_crossing_perimeters", "infill_first", + "bridge_angle", + "solid_infill_below_area", + "only_retract_when_crossing_perimeters", "enforce_retract_first_layer", + "infill_first", "avoid_crossing_perimeters_max_detour", #ifdef HAS_PRESSURE_EQUALIZER "max_volumetric_extrusion_rate_slope_positive", "max_volumetric_extrusion_rate_slope_negative", diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index a5131d091..333b33d01 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -79,6 +79,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver& /* ne "deretract_speed", "disable_fan_first_layers", "duplicate_distance", + "enforce_retract_first_layer", "end_gcode", "end_filament_gcode", "external_perimeter_acceleration", diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index e82b8f442..4f0731fb3 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -1368,6 +1368,14 @@ void PrintConfigDef::init_fff_params() def->mode = comExpert | comSuSi; def->set_default_value(new ConfigOptionBool(true)); + def = this->add("enforce_retract_first_layer", coBool); + def->label = L("But on first layer"); + def->full_label = L("Don't check crossings for retraction on first layer"); + def->category = OptionCategory::extruders; + def->tooltip = L("let the retraction happens on the first alyer even if the travel path does not exceed the upper layer's perimeters."); + def->mode = comExpert; + def->set_default_value(new ConfigOptionBool(true)); + def = this->add("external_infill_margin", coFloatOrPercent); def->label = L("Default"); def->full_label = L("Default infill margin"); @@ -3650,7 +3658,7 @@ void PrintConfigDef::init_fff_params() def->label = L("Only retract when crossing perimeters"); def->category = OptionCategory::extruders; def->tooltip = L("Disables retraction when the travel path does not exceed the upper layer's perimeters " - "(and thus any ooze will probably be invisible)."); + "(and thus any ooze will probably be invisible)."); def->mode = comExpert | comPrusa; def->set_default_value(new ConfigOptionBool(false)); diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index d0f710a49..568c00181 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -1102,6 +1102,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE( ((ConfigOptionInts, disable_fan_first_layers)) ((ConfigOptionEnum, draft_shield)) ((ConfigOptionFloat, duplicate_distance)) + ((ConfigOptionBool, enforce_retract_first_layer)) ((ConfigOptionFloatOrPercent, external_perimeter_acceleration)) ((ConfigOptionInts, external_perimeter_fan_speed)) ((ConfigOptionFloat, extruder_clearance_height)) -- cgit v1.2.3 From 298f4faa47bf42034d31ce8f2bbdfba51ee7ae6a Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 20:02:27 +0200 Subject: update ui_layout readme supermerill/SuperSlicer#2897 --- resources/ui_layout/Readme.md | 144 ++++++++++++++++++++++++----------- resources/ui_layout/example/print.as | 4 +- 2 files changed, 103 insertions(+), 45 deletions(-) diff --git a/resources/ui_layout/Readme.md b/resources/ui_layout/Readme.md index 7d65036cb..62410091d 100644 --- a/resources/ui_layout/Readme.md +++ b/resources/ui_layout/Readme.md @@ -1,4 +1,21 @@ -# How to customize the setting UI +# UI layouts wiki + +UI layout can be selected in the `configuration->preferences->GUI->settings layout UI and colors`. +In this box, you can select the layout you want to use, each one has its directory in ui_layout in your configuration folder (use help->show configuration folder to get to it). +Note: The configuration folder is created at the first launch of superslicer. + +## add a new layout + +To add a new layout, copy-paste the `default` directory, and rename it to your new name ('newlayout' for this wiki) +Go inside this directory. + +Edit the version.ini file: + * the name will be displayed in the preference combobox and the description will be used as the tooltip. +Then, you can edit teh ui file to change the layout of each tab (print, filament and printer). +Note that each setting has to be in its tab, it can't change. That's why there is print_temperature, as the temperature field is linked to the filament, and can't be in a print setting. +But inside a tab, you have full control. + +# How to customize a setting UI ## How it works The software will search for each tab the needed ui files @@ -23,51 +40,70 @@ INT represent an integer parameters that are inside [] are optionals each parameter is separated by ':' * Page: - page[:idx]:STR:STR + `page[:idx]:STR:STR` * first STR is for the label and the second for the icon, with or without the .svg / .png * idx: append the index of the page (for extruder ui) to the name * Group: - group[:no_title][:title_width$INT][:label_width$INT][:sidetext_width$INT][:EVENT][:id$INT][:idx]:STR - * EVENT can be extruders_count_event if the group contains extruders_count and is a printer tab ; silent_mode_event if the group contains silent_mode and is a printer tab ; material_density_event if the group contains material_density. - * title_width$INT is used to set the size of the left column, where titles are draw. - * label_width$INT is used to set the size of the labels on lines. - * sidetext_width$INT is used to set the size of the suffix label (see sidetext in setting). - * EVENT can be extruders_count_event (TabPrinter only), silent_mode_event (TabPrinter only), material_density_event. - * no_title is used to remove the left column, where titles are draw. - * no_search to not add this group's widgets into the search tool. + `group[:no_title][:title_width$INT][:label_width$INT][:sidetext_width$INT][:EVENT][:id$INT][:idx]:STR` + * `EVENT` can be extruders_count_event if the group contains extruders_count and is a printer tab ; silent_mode_event if the group contains silent_mode and is a printer tab ; material_density_event if the group contains material_density. + * `title_width$INT` is used to set the size of the left column, where titles are draw. + * `label_width$INT` is used to set the size of the labels on lines. + * `sidetext_width$INT` is used to set the size of the suffix label (see sidetext in setting). + * `no_title` is used to remove the left column, where titles are draw. + * `no_search` to not add this group's widgets into the search tool. * Line: - line:STR* + `line:STR*` * setting: - setting[label$STR][label_width$INT][:full_label][:full_width][:sidetext$STR][sidetext_width$INT][:simple|advanced|expert][:width$INT][:height$INT][:id$INT]:STR - * STR, the last parameter: the id name of the setting. - * label$STR: to override the label by this new one (if it ends with '_' it won't have a ':' ; if empty it won't have a length). - * label_width$INT: change the width of the label. Only works if it's in a line. Override the group one. -1 for auto. - * label_left: Draw the label aligned to the left instead of the right. - * full_label$STR: to override the full_label by this new one (full_label is used on modifiers). - * full_label: to override the label by the "full one". - * full_width: to tell to create a field that span the full width. - * sidetext$STR: the suffix at the right of the widget (like 'mm'). - * sidetext_width$INT: the suffix label length (override the group one). -1 for auto. - * max_literal$INT[%]: if the user enter a value higher than that and it's a 'float or percent' field, then emit a pop-up to question if he doesn't forgot a '%'. If negative, it check if the value isn't lower than the absolute max_literal, instead of greater. If there is a '%' after the value, then it's multiplied by the biggest nozzle diameter. - * simple|advanced|expert: add one of these to modify the mode in which this setting appear. - * width$INT: change the width of the field. Shouod work on most type of settings. - * height$INT: change the height of the field. Don't works with every type of setting (mostly multilne text). Set to -1 to 'disable'. - * precision$INT: number of digit after the dot displayed. - * url$STR: the url to call when clicking on it. - * id $INT: for setting only a single value of a setting array. - * idx: for setting only a single value of a setting array, with the index of the page (for extruder ui page) -* height:INT: change the default height of settings. Don't works with every type of setting (mostly multilne text). Set to 0 or -1 to disable. -* recommended_thin_wall_thickness_description: create a text widget to explain recommended thin wall thickness (only in a fff print tab). -* parent_preset_description: create a text widget to explain parent preset. -* cooling_description: create a text widget to explain cooling (only in a filament tab). -* volumetric_speed_description: create a text widget to explain volumetric speed (only in a filament tab). -* filament_ramming_parameters: create a widget for filament ramming. -* filament_overrides_page: create a page for overrides (only in a filament tab). -* unregular_pages: create needed special pages for a fff printer tab. -* printhost: create printhost settings for the group (only in a printer tab). -* bed_shape: create bed shape widget (only in a printer tab). -* extruders_count: create extruders_count setting (only in a fff printer tab). -* logs: activated logs. + `setting[label$STR][label_width$INT][:full_label][:full_width][:sidetext$STR][sidetext_width$INT][:simple|advanced|expert][:width$INT][:height$INT][:id$INT]:STR` + * `STR`, the last parameter: the id name of the setting. + * `label$STR`: to override the label by this new one (if it ends with '_' it won't have a ':' ; if empty it won't have a length). + * `label_width$INT`: change the width of the label. Only works if it's in a line. Override the group one. -1 for auto. + * `label_left`: Draw the label aligned to the left instead of the right. + * `full_label$STR`: to override the full_label by this new one (full_label is used on modifiers). + * `full_label`: to override the label by the "full one". + * `full_width`: to tell to create a field that span the full width. + * `sidetext$STR`: the suffix at the right of the widget (like 'mm'). + * `sidetext_width$INT`: the suffix label length (override the group one). -1 for auto. + * `max_literal$INT[%]`: if the user enter a value higher than that and it's a 'float or percent' field, then emit a pop-up to question if he doesn't forgot a '%'. If negative, it check if the value isn't lower than the absolute max_literal, instead of greater. If there is a '%' after the value, then it's multiplied by the biggest nozzle diameter. + * `tags$STR[$STR]*`: to set the tags in which the setting can show up. Each tag has to be suffixed by a `$`. + * simple|advanced|expert: old way to set the tags: simple will set the tags to 'Simple', advanced will set the tags to 'Simple' and 'Advanced', and 'expert' will set the tags to 'Simple' 'Advanced' and 'Expert'. + * `width$INT`: change the width of the field. Shouod work on most type of settings. + * `height$INT`: change the height of the field. Don't works with every type of setting (mostly multilne text). Set to -1 to 'disable'. + * `precision$INT`: number of digit after the dot displayed. + * `url$STR`: the url to call when clicking on it. + * `id $INT`: for setting only a single value of a setting array. + * `idx`: for setting only a single value of a setting array, with the index of the page (for extruder ui page) + * `script`: to tell that this setting doesn't exist and is defined in a script (see script section). You have to also define the type. They comes in two flavor: single value and array (Single values have to be used, but for filament and extruder tabs that require arrays): + * `bool`: Single vlaue. Tell the sotfware it's a checkbox (boolean return value) + * `int`: Single vlaue. Tell the sotfware it's a int entry field (int return value) + * `float`: Single vlaue. Tell the sotfware it's a numeric entry field (float return value) + * `percent`: Single vlaue. Tell the sotfware it's a percentage (float return value) + * `float_or_percent`: Single vlaue. Tell the sotfware it's a numeric that can acept a % value (float return value) + * `string`: Single vlaue. Tell the sotfware it's a numeric an entry field where you can enter a text(string return value) + * `bools`: Array. Tell the sotfware it's a checkbox (boolean return value) + * `ints`: Array. Tell the sotfware it's a int entry field (int return value) + * `floats`: Array. Tell the sotfware it's a numeric entry field (float return value) + * `percents`: Array. Tell the sotfware it's a percentage (float return value) + * `floats_or_percents: mandatory`: Array. Tell the sotfware it's a numeric that can acept a % value (boolean return value) + * `strings`: Array. Tell mandatory for a filament or an extruder value. The sotfware it's a numeric an entry field where you can enter a text(string return value) + * `enum$STR$STR[$STR$STR]*`: tell the sotfware it's a combobox (string return value). It has to be followed by $name$label for each option you want to show. +Also, script may depends on normal fields. When a setting it depends is modified, the scripted widget will appear modified. And resetting a widget will reset all depending fields. + * `depends$STR[$STR]*`: add the setting fields this scripted widget depends on. Each one has to be suffixed by a '$' + +There is also special commands: +* `height:INT`: change the default height of settings. Don't works with every type of setting (mostly multilne text). Set to 0 or -1 to disable. +* `recommended_thin_wall_thickness_description`: create a text widget to explain recommended thin wall thickness (only in a fff print tab). +* `parent_preset_description`: create a text widget to explain parent preset. +* `cooling_description`: create a text widget to explain cooling (only in a filament tab). +* `volumetric_speed_description`: create a text widget to explain volumetric speed (only in a filament tab). +* `filament_ramming_parameters`: create a widget for filament ramming. +* `filament_overrides_page`: create a page for overrides (only in a filament tab). +* `unregular_pages`: create needed special pages for a fff printer tab. +* `printhost`: create printhost settings for the group (only in a printer tab). +* `bed_shape`: create bed shape widget (only in a printer tab). +* `extruders_count`: create extruders_count setting (only in a fff printer tab). +* `logs`: activated logs. + ### ui file syntax trailing & leading tabs & spaces are removed, so you can indent as you want. If the first character is '#', then this line is ignored @@ -85,5 +121,27 @@ exemple: end_group end_page -## notes -A print.ui.legacy is here with the prusaslicer tabs, just rename print.ui and remove the .legacy to switch from the Slic3r print layout to prusaslicer print layout. +# Scripts + +## how to write a script + +The file the script is written is a .as file. If a scripted widget is used in the print.ui file, then it has to be defined in the print.as file. + +The language used is [angelscript](https://www.angelcode.com/angelscript). + +To write the functions for a scripted widget with a 'my_widget' name and a type 'int', then you have to write these methods: +* int my_widget_get() +* void my_widget_set(int value) + +The first one is called when the gui need the value to display. +The second one is called when the user change the value in the gui. + +At the start of the print.ui file, there is a little dictionnary with he methods available for the script to call. +It also contains the list of methods needed for all types (not only int). + +## frequent settings + +The files freq_fff.ui and freq_sla.ui contains teh frequent settings. +Their layout is similar as other ui files. They still have to define a page and a group. +The group has to be `group:freq_settings_event:no_title:no_search:` to not interfer witht he rest of the gui. +If it use scripted widget, they have to be in the print.as file. The syntax is similar to c++/java. diff --git a/resources/ui_layout/example/print.as b/resources/ui_layout/example/print.as index 85656054c..2303a4c62 100644 --- a/resources/ui_layout/example/print.as +++ b/resources/ui_layout/example/print.as @@ -1,7 +1,7 @@ ////////////////////////////////////////// // Api for SuperSlicer scripted widgets: // -//// Functions callable //// +//////// callable Functions ////// // // -- to print on the console, for debugging -- // void print(string &out) @@ -36,7 +36,7 @@ // ask_for_refresh() // ask for a OPTNAME_set() if in a OPTNAME_get() // -//// Functions to define for each script widget //// +//////// Functions to define for each script widget //////// // // note that you can't call set_thing() in an OPTNAME_get(), you can only call these in an OPTNAME_set() // -- cgit v1.2.3 From 3b03a6dbf5751cb1d16c141a923388b3c84b3159 Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 21:47:07 +0200 Subject: Use an incremental method to create brim to avoid offset() simplification with big values. supermerill/SuperSlicer#2899 --- src/libslic3r/Brim.cpp | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/src/libslic3r/Brim.cpp b/src/libslic3r/Brim.cpp index f9400c3f4..99970199b 100644 --- a/src/libslic3r/Brim.cpp +++ b/src/libslic3r/Brim.cpp @@ -1050,21 +1050,22 @@ void make_brim(const Print& print, const Flow& flow, const PrintObjectPtrs& obje } } islands = bigger_islands; + ExPolygons last_islands; for (size_t i = 0; i < num_loops; ++i) { loops.emplace_back(); print.throw_if_canceled(); // only grow the contour, not holes bigger_islands.clear(); if (i > 0) { - for (ExPolygon& expoly : islands) { - for (Polygon& big_contour : offset(expoly.contour, double(scaled_spacing)* i, jtSquare)) { - bigger_islands.emplace_back(expoly); - bigger_islands.back().contour = big_contour; + for (ExPolygon& expoly : last_islands) { + for (Polygon& big_contour : offset(expoly.contour, double(scaled_spacing), jtSquare)) { + bigger_islands.emplace_back(); + bigger_islands.back().contour = big_contour.simplify(scaled_resolution / 10)[0]; } } } else bigger_islands = islands; - bigger_islands = union_ex(bigger_islands); - for (ExPolygon& expoly : bigger_islands) { + last_islands = union_ex(bigger_islands); + for (ExPolygon& expoly : last_islands) { loops[i].emplace_back(expoly.contour); // buggy ////also add hole, in case of it's merged with a contour. <= HOW? if there's an island inside a hole! (in the same object) @@ -1077,7 +1078,10 @@ void make_brim(const Print& print, const Flow& flow, const PrintObjectPtrs& obje std::reverse(loops.begin(), loops.end()); + // Using offset(expoly.contour, num_loops* scaled_spacing, jtSquare) create a different result than the incremental 'loops' creation. + // so i have to restrict with the biggest (first) loop from loops (last_islands). //intersection + brimmable_areas = intersection_ex(brimmable_areas, offset_ex(last_islands, double(scaled_spacing) * 0.5, jtSquare)); Polygons frontiers; //use contour from brimmable_areas (external frontier) for (ExPolygon& expoly : brimmable_areas) { -- cgit v1.2.3 From 7853aac1e10adf82fbd08ed188e700be9791a7fc Mon Sep 17 00:00:00 2001 From: supermerill Date: Tue, 12 Jul 2022 23:11:09 +0200 Subject: Fixing _load_skirt_brim_preview_toolpaths (and collision check) for big brim & skirts --- src/slic3r/GUI/GLCanvas3D.cpp | 40 +++++++++++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 11 deletions(-) diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 794c58a77..fa9bc02c9 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -5909,6 +5909,19 @@ void GLCanvas3D::_load_skirt_brim_preview_toolpaths(const BuildVolume &build_vol skirt_height = std::min(skirt_height, print_zs.size()); print_zs.erase(print_zs.begin() + skirt_height, print_zs.end()); + // Ensure that no volume grows over the limits. If the volume is too large, allocate a new one. (on-demand) + auto ensure_volume_is_ready = [&build_volume, this](GLVolume* volume) -> GLVolume*{ + if (volume->indexed_vertex_array.vertices_and_normals_interleaved.size() > MAX_VERTEX_BUFFER_SIZE) { + //update is_outside before creating the new one + volume->is_outside = !build_volume.all_paths_inside_vertices_and_normals_interleaved(volume->indexed_vertex_array.vertices_and_normals_interleaved, volume->indexed_vertex_array.bounding_box()); + //create the new one + GLVolume& vol = *volume; + volume = this->m_volumes.new_toolpath_volume(vol.color); + reserve_new_volume_finalize_old_volume(*volume, vol, this->m_initialized); + } + return volume; + }; + GLVolume *volume = m_volumes.new_toolpath_volume(color, VERTEX_BUFFER_RESERVE_SIZE); for (size_t i = 0; i < skirt_height; ++ i) { volume->print_zs.emplace_back(print_zs[i]); @@ -5916,33 +5929,38 @@ void GLCanvas3D::_load_skirt_brim_preview_toolpaths(const BuildVolume &build_vol volume->offsets.emplace_back(volume->indexed_vertex_array.triangle_indices.size()); if (i == 0) { //skirt & brim from print + if (!print->brim().empty()) volume = ensure_volume_is_ready(volume); _3DScene::extrusionentity_to_verts(print->brim(), print_zs[i], Point(0, 0), *volume); - if(print->skirt_first_layer()) + if (print->skirt_first_layer()) { + if (!print->skirt_first_layer()->empty()) volume = ensure_volume_is_ready(volume); _3DScene::extrusionentity_to_verts(*print->skirt_first_layer(), print_zs[i], Point(0, 0), *volume); + } //skirt & brim from objects for (const PrintObject* print_object : print->objects()) { if (!print_object->brim().empty()) - for(const PrintInstance& inst : print_object->instances()) + for (const PrintInstance& inst : print_object->instances()) { + if (!print_object->brim().empty()) volume = ensure_volume_is_ready(volume); _3DScene::extrusionentity_to_verts(print_object->brim(), print_zs[i], inst.shift, *volume); + } if (print_object->skirt_first_layer()) - for (const PrintInstance& inst : print_object->instances()) + for (const PrintInstance& inst : print_object->instances()) { + if (!print_object->skirt_first_layer()->empty()) volume = ensure_volume_is_ready(volume); _3DScene::extrusionentity_to_verts(*print_object->skirt_first_layer(), print_zs[i], inst.shift, *volume); + } } } //skirts from print - if (i != 0 || !print->skirt_first_layer()) + if (i != 0 || !print->skirt_first_layer()) { + if (!print->skirt().empty()) volume = ensure_volume_is_ready(volume); _3DScene::extrusionentity_to_verts(print->skirt(), print_zs[i], Point(0, 0), *volume); + } //skirts from objects for (const PrintObject* print_object : print->objects()) { if ( !print_object->skirt().empty() && (i != 0 || !print_object->skirt_first_layer())) - for (const PrintInstance& inst : print_object->instances()) + for (const PrintInstance& inst : print_object->instances()) { + if (!print_object->skirt().empty()) volume = ensure_volume_is_ready(volume); _3DScene::extrusionentity_to_verts(print_object->skirt(), print_zs[i], inst.shift, *volume); - } - // Ensure that no volume grows over the limits. If the volume is too large, allocate a new one. - if (volume->indexed_vertex_array.vertices_and_normals_interleaved.size() > MAX_VERTEX_BUFFER_SIZE) { - GLVolume &vol = *volume; - volume = m_volumes.new_toolpath_volume(vol.color); - reserve_new_volume_finalize_old_volume(*volume, vol, m_initialized); + } } } volume->is_outside = ! build_volume.all_paths_inside_vertices_and_normals_interleaved(volume->indexed_vertex_array.vertices_and_normals_interleaved, volume->indexed_vertex_array.bounding_box()); -- cgit v1.2.3