// #include "libslic3r/GCodeSender.hpp" #include "ConfigManipulation.hpp" #include "I18N.hpp" #include "GUI_App.hpp" #include "PresetBundle.hpp" #include namespace Slic3r { namespace GUI { void ConfigManipulation::apply(DynamicPrintConfig* config, DynamicPrintConfig* new_config) { bool modified = false; for (auto opt_key : config->diff(*new_config)) { config->set_key_value(opt_key, new_config->option(opt_key)->clone()); modified = true; } if (modified && load_config != nullptr) load_config(); } void ConfigManipulation::toggle_field(const std::string& opt_key, const bool toggle, int opt_index/* = -1*/) { if (local_config) { if (local_config->option(opt_key) == nullptr) return; } Field* field = get_field(opt_key, opt_index); if (field==nullptr) return; field->toggle(toggle); } void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, const bool is_global_config) { // #ys_FIXME_to_delete //! Temporary workaround for the correct updates of the TextCtrl (like "layer_height"): // KillFocus() for the wxSpinCtrl use CallAfter function. So, // to except the duplicate call of the update() after dialog->ShowModal(), // let check if this process is already started. if (is_msg_dlg_already_exist) return; // layer_height shouldn't be equal to zero if (config->opt_float("layer_height") < EPSILON) { const wxString msg_text = _(L("Zero layer height is not valid.\n\nThe layer height will be reset to 0.01.")); wxMessageDialog dialog(nullptr, msg_text, _(L("Layer height")), wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; dialog.ShowModal(); new_conf.set_key_value("layer_height", new ConfigOptionFloat(0.01)); apply(config, &new_conf); is_msg_dlg_already_exist = false; } if (fabs(config->option("first_layer_height")->value - 0) < EPSILON) { const wxString msg_text = _(L("Zero first layer height is not valid.\n\nThe first layer height will be reset to 0.01.")); wxMessageDialog dialog(nullptr, msg_text, _(L("First layer height")), wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; is_msg_dlg_already_exist = true; dialog.ShowModal(); new_conf.set_key_value("first_layer_height", new ConfigOptionFloatOrPercent(0.01, false)); apply(config, &new_conf); is_msg_dlg_already_exist = false; } double fill_density = config->option("fill_density")->value; if (config->opt_bool("spiral_vase") && ! (config->opt_int("perimeters") == 1 && config->opt_int("top_solid_layers") == 0 && fill_density == 0 && ! config->opt_bool("support_material") && config->opt_int("support_material_enforce_layers") == 0 && config->opt_bool("ensure_vertical_shell_thickness") && ! config->opt_bool("thin_walls"))) { wxString msg_text = _(L("The Spiral Vase mode requires:\n" "- one perimeter\n" "- no top solid layers\n" "- 0% fill density\n" "- no support material\n" "- Ensure vertical shell thickness enabled\n" "- Detect thin walls disabled")); if (is_global_config) msg_text += "\n\n" + _(L("Shall I adjust those settings in order to enable Spiral Vase?")); wxMessageDialog dialog(nullptr, msg_text, _(L("Spiral Vase")), wxICON_WARNING | (is_global_config ? wxYES | wxNO : wxOK)); DynamicPrintConfig new_conf = *config; auto answer = dialog.ShowModal(); if (!is_global_config || answer == wxID_YES) { new_conf.set_key_value("perimeters", new ConfigOptionInt(1)); new_conf.set_key_value("top_solid_layers", new ConfigOptionInt(0)); new_conf.set_key_value("fill_density", new ConfigOptionPercent(0)); new_conf.set_key_value("support_material", new ConfigOptionBool(false)); new_conf.set_key_value("support_material_enforce_layers", new ConfigOptionInt(0)); new_conf.set_key_value("ensure_vertical_shell_thickness", new ConfigOptionBool(true)); new_conf.set_key_value("thin_walls", new ConfigOptionBool(false)); fill_density = 0; } else { new_conf.set_key_value("spiral_vase", new ConfigOptionBool(false)); } apply(config, &new_conf); if (cb_value_change) cb_value_change("fill_density", fill_density); } if (config->opt_bool("wipe_tower") && config->opt_bool("support_material") && config->opt_float("support_material_contact_distance") > 0. && (config->opt_int("support_material_extruder") != 0 || config->opt_int("support_material_interface_extruder") != 0)) { wxString msg_text = _(L("The Wipe Tower currently supports the non-soluble supports only\n" "if they are printed with the current extruder without triggering a tool change.\n" "(both support_material_extruder and support_material_interface_extruder need to be set to 0).")); if (is_global_config) msg_text += "\n\n" + _(L("Shall I adjust those settings in order to enable the Wipe Tower?")); wxMessageDialog dialog (nullptr, msg_text, _(L("Wipe Tower")), wxICON_WARNING | (is_global_config ? wxYES | wxNO : wxOK)); DynamicPrintConfig new_conf = *config; auto answer = dialog.ShowModal(); if (!is_global_config || answer == wxID_YES) { new_conf.set_key_value("support_material_extruder", new ConfigOptionInt(0)); new_conf.set_key_value("support_material_interface_extruder", new ConfigOptionInt(0)); } else new_conf.set_key_value("wipe_tower", new ConfigOptionBool(false)); apply(config, &new_conf); } if (config->opt_bool("wipe_tower") && config->opt_bool("support_material") && config->opt_float("support_material_contact_distance") == 0 && !config->opt_bool("support_material_synchronize_layers")) { wxString msg_text = _(L("For the Wipe Tower to work with the soluble supports, the support layers\n" "need to be synchronized with the object layers.")); if (is_global_config) msg_text += "\n\n" + _(L("Shall I synchronize support layers in order to enable the Wipe Tower?")); wxMessageDialog dialog(nullptr, msg_text, _(L("Wipe Tower")), wxICON_WARNING | (is_global_config ? wxYES | wxNO : wxOK)); DynamicPrintConfig new_conf = *config; auto answer = dialog.ShowModal(); if (!is_global_config || answer == wxID_YES) { new_conf.set_key_value("support_material_synchronize_layers", new ConfigOptionBool(true)); } else new_conf.set_key_value("wipe_tower", new ConfigOptionBool(false)); apply(config, &new_conf); } static bool support_material_overhangs_queried = false; if (config->opt_bool("support_material")) { // Ask only once. if (!support_material_overhangs_queried) { support_material_overhangs_queried = true; if (!config->opt_bool("overhangs")/* != 1*/) { wxString msg_text = _(L("Supports work better, if the following feature is enabled:\n" "- Detect bridging perimeters")); if (is_global_config) msg_text += "\n\n" + _(L("Shall I adjust those settings for supports?")); wxMessageDialog dialog(nullptr, msg_text, _(L("Support Generator")), wxICON_WARNING | (is_global_config ? wxYES | wxNO | wxCANCEL : wxOK)); DynamicPrintConfig new_conf = *config; auto answer = dialog.ShowModal(); if (!is_global_config || answer == wxID_YES) { // Enable "detect bridging perimeters". new_conf.set_key_value("overhangs", new ConfigOptionBool(true)); } else if (answer == wxID_NO) { // Do nothing, leave supports on and "detect bridging perimeters" off. } else if (answer == wxID_CANCEL) { // Disable supports. new_conf.set_key_value("support_material", new ConfigOptionBool(false)); support_material_overhangs_queried = false; } apply(config, &new_conf); } } } else { support_material_overhangs_queried = false; } if (config->option("fill_density")->value == 100) { auto fill_pattern = config->option>("fill_pattern")->value; std::string str_fill_pattern = ""; t_config_enum_values map_names = config->option>("fill_pattern")->get_enum_values(); for (auto it : map_names) { if (fill_pattern == it.second) { str_fill_pattern = it.first; break; } } if (!str_fill_pattern.empty()) { const std::vector& external_fill_pattern = config->def()->get("top_fill_pattern")->enum_values; bool correct_100p_fill = false; for (const std::string& fill : external_fill_pattern) { if (str_fill_pattern == fill) correct_100p_fill = true; } // get fill_pattern name from enum_labels for using this one at dialog_msg str_fill_pattern = _utf8(config->def()->get("fill_pattern")->enum_labels[fill_pattern]); if (!correct_100p_fill) { wxString msg_text = GUI::from_u8((boost::format(_utf8(L("The %1% infill pattern is not supposed to work at 100%% density."))) % str_fill_pattern).str()); if (is_global_config) msg_text += "\n\n" + _(L("Shall I switch to rectilinear fill pattern?")); wxMessageDialog dialog(nullptr, msg_text, _(L("Infill")), wxICON_WARNING | (is_global_config ? wxYES | wxNO : wxOK) ); DynamicPrintConfig new_conf = *config; auto answer = dialog.ShowModal(); if (!is_global_config || answer == wxID_YES) { new_conf.set_key_value("fill_pattern", new ConfigOptionEnum(ipRectilinear)); fill_density = 100; } else fill_density = wxGetApp().preset_bundle->prints.get_selected_preset().config.option("fill_density")->value; new_conf.set_key_value("fill_density", new ConfigOptionPercent(fill_density)); apply(config, &new_conf); if (cb_value_change) cb_value_change("fill_density", fill_density); } } } } void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig* config) { bool have_perimeters = config->opt_int("perimeters") > 0; for (auto el : { "extra_perimeters", "ensure_vertical_shell_thickness", "thin_walls", "overhangs", "seam_position", "external_perimeters_first", "external_perimeter_extrusion_width", "perimeter_speed", "small_perimeter_speed", "external_perimeter_speed" }) toggle_field(el, have_perimeters); bool have_infill = config->option("fill_density")->value > 0; // infill_extruder uses the same logic as in Print::extruders() for (auto el : { "fill_pattern", "infill_every_layers", "infill_only_where_needed", "solid_infill_every_layers", "solid_infill_below_area", "infill_extruder" }) toggle_field(el, have_infill); bool has_spiral_vase = config->opt_bool("spiral_vase"); bool has_top_solid_infill = config->opt_int("top_solid_layers") > 0; bool has_bottom_solid_infill = config->opt_int("bottom_solid_layers") > 0; bool has_solid_infill = has_top_solid_infill || has_bottom_solid_infill; // solid_infill_extruder uses the same logic as in Print::extruders() for (auto el : { "top_fill_pattern", "bottom_fill_pattern", "infill_first", "solid_infill_extruder", "solid_infill_extrusion_width", "solid_infill_speed" }) toggle_field(el, has_solid_infill); for (auto el : { "fill_angle", "bridge_angle", "infill_extrusion_width", "infill_speed", "bridge_speed" }) toggle_field(el, have_infill || has_solid_infill); toggle_field("top_solid_min_thickness", ! has_spiral_vase && has_top_solid_infill); toggle_field("bottom_solid_min_thickness", ! has_spiral_vase && has_bottom_solid_infill); // Gap fill is newly allowed in between perimeter lines even for empty infill (see GH #1476). toggle_field("gap_fill_speed", have_perimeters); for (auto el : { "top_infill_extrusion_width", "top_solid_infill_speed" }) toggle_field(el, has_top_solid_infill); bool have_default_acceleration = config->opt_float("default_acceleration") > 0; for (auto el : { "perimeter_acceleration", "infill_acceleration", "bridge_acceleration", "first_layer_acceleration" }) toggle_field(el, have_default_acceleration); bool have_skirt = config->opt_int("skirts") > 0 || config->opt_float("min_skirt_length") > 0; for (auto el : { "skirt_distance", "skirt_height" }) toggle_field(el, have_skirt); bool have_brim = config->opt_float("brim_width") > 0; // perimeter_extruder uses the same logic as in Print::extruders() toggle_field("perimeter_extruder", have_perimeters || have_brim); bool have_raft = config->opt_int("raft_layers") > 0; bool have_support_material = config->opt_bool("support_material") || have_raft; bool have_support_material_auto = have_support_material && config->opt_bool("support_material_auto"); bool have_support_interface = config->opt_int("support_material_interface_layers") > 0; bool have_support_soluble = have_support_material && config->opt_float("support_material_contact_distance") == 0; for (auto el : { "support_material_pattern", "support_material_with_sheath", "support_material_spacing", "support_material_angle", "support_material_interface_layers", "dont_support_bridges", "support_material_extrusion_width", "support_material_contact_distance", "support_material_xy_spacing" }) toggle_field(el, have_support_material); toggle_field("support_material_threshold", have_support_material_auto); for (auto el : { "support_material_interface_spacing", "support_material_interface_extruder", "support_material_interface_speed", "support_material_interface_contact_loops" }) toggle_field(el, have_support_material && have_support_interface); toggle_field("support_material_synchronize_layers", have_support_soluble); toggle_field("perimeter_extrusion_width", have_perimeters || have_skirt || have_brim); toggle_field("support_material_extruder", have_support_material || have_skirt); toggle_field("support_material_speed", have_support_material || have_brim || have_skirt); bool have_sequential_printing = config->opt_bool("complete_objects"); for (auto el : { "extruder_clearance_radius", "extruder_clearance_height" }) toggle_field(el, have_sequential_printing); bool have_ooze_prevention = config->opt_bool("ooze_prevention"); toggle_field("standby_temperature_delta", have_ooze_prevention); bool have_wipe_tower = config->opt_bool("wipe_tower"); for (auto el : { "wipe_tower_x", "wipe_tower_y", "wipe_tower_width", "wipe_tower_rotation_angle", "wipe_tower_bridging" }) toggle_field(el, have_wipe_tower); } void ConfigManipulation::update_print_sla_config(DynamicPrintConfig* config, const bool is_global_config/* = false*/) { double head_penetration = config->opt_float("support_head_penetration"); double head_width = config->opt_float("support_head_width"); if (head_penetration > head_width) { wxString msg_text = _(L("Head penetration should not be greater than the head width.")); wxMessageDialog dialog(nullptr, msg_text, _(L("Invalid Head penetration")), wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; if (dialog.ShowModal() == wxID_OK) { new_conf.set_key_value("support_head_penetration", new ConfigOptionFloat(head_width)); apply(config, &new_conf); } } double pinhead_d = config->opt_float("support_head_front_diameter"); double pillar_d = config->opt_float("support_pillar_diameter"); if (pinhead_d > pillar_d) { wxString msg_text = _(L("Pinhead diameter should be smaller than the pillar diameter.")); wxMessageDialog dialog(nullptr, msg_text, _(L("Invalid pinhead diameter")), wxICON_WARNING | wxOK); DynamicPrintConfig new_conf = *config; if (dialog.ShowModal() == wxID_OK) { new_conf.set_key_value("support_head_front_diameter", new ConfigOptionFloat(pillar_d / 2.0)); apply(config, &new_conf); } } } void ConfigManipulation::toggle_print_sla_options(DynamicPrintConfig* config) { bool supports_en = config->opt_bool("supports_enable"); toggle_field("support_head_front_diameter", supports_en); toggle_field("support_head_penetration", supports_en); toggle_field("support_head_width", supports_en); toggle_field("support_pillar_diameter", supports_en); toggle_field("support_max_bridges_on_pillar", supports_en); toggle_field("support_pillar_connection_mode", supports_en); toggle_field("support_buildplate_only", supports_en); toggle_field("support_base_diameter", supports_en); toggle_field("support_base_height", supports_en); toggle_field("support_base_safety_distance", supports_en); toggle_field("support_critical_angle", supports_en); toggle_field("support_max_bridge_length", supports_en); toggle_field("support_max_pillar_link_distance", supports_en); toggle_field("support_points_density_relative", supports_en); toggle_field("support_points_minimal_distance", supports_en); bool pad_en = config->opt_bool("pad_enable"); toggle_field("pad_wall_thickness", pad_en); toggle_field("pad_wall_height", pad_en); toggle_field("pad_brim_size", pad_en); toggle_field("pad_max_merge_distance", pad_en); // toggle_field("pad_edge_radius", supports_en); toggle_field("pad_wall_slope", pad_en); toggle_field("pad_around_object", pad_en); toggle_field("pad_around_object_everywhere", pad_en); bool zero_elev = config->opt_bool("pad_around_object") && pad_en; toggle_field("support_object_elevation", supports_en && !zero_elev); toggle_field("pad_object_gap", zero_elev); toggle_field("pad_around_object_everywhere", zero_elev); toggle_field("pad_object_connector_stride", zero_elev); toggle_field("pad_object_connector_width", zero_elev); toggle_field("pad_object_connector_penetration", zero_elev); } } // GUI } // Slic3r