// FIXME: extract absolute units -> em

#include "ConfigWizard_private.hpp"

#include <algorithm>
#include <numeric>
#include <utility>
#include <unordered_map>
#include <stdexcept>
#include <boost/format.hpp>
#include <boost/log/trivial.hpp>
#include <boost/algorithm/string/predicate.hpp>

#include <wx/settings.h>
#include <wx/stattext.h>
#include <wx/textctrl.h>
#include <wx/dcclient.h>
#include <wx/statbmp.h>
#include <wx/checkbox.h>
#include <wx/statline.h>
#include <wx/dataview.h>
#include <wx/notebook.h>
#include <wx/display.h>
#include <wx/filefn.h>
#include <wx/wupdlock.h>
#include <wx/debug.h>

#include "libslic3r/Utils.hpp"
#include "GUI.hpp"
#include "GUI_Utils.hpp"
#include "slic3r/Config/Snapshot.hpp"
#include "slic3r/Utils/PresetUpdater.hpp"


namespace Slic3r {
namespace GUI {


using Config::Snapshot;
using Config::SnapshotDB;


// Configuration data structures extensions needed for the wizard

bool Bundle::load(fs::path source_path, bool ais_in_resources, bool ais_prusa_bundle)
{
    this->preset_bundle = std::make_unique<PresetBundle>();
    this->is_in_resources = ais_in_resources;
    this->is_prusa_bundle = ais_prusa_bundle;

    std::string path_string = source_path.string();
    size_t presets_loaded = preset_bundle->load_configbundle(path_string, PresetBundle::LOAD_CFGBNDLE_SYSTEM);
    auto first_vendor = preset_bundle->vendors.begin();
    if (first_vendor == preset_bundle->vendors.end()) {
        BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No vendor information defined, cannot install.") % path_string;
        return false;
    }
    if (presets_loaded == 0) {
        BOOST_LOG_TRIVIAL(error) << boost::format("Vendor bundle: `%1%`: No profile loaded.") % path_string;
        return false;
    } 

    BOOST_LOG_TRIVIAL(trace) << boost::format("Vendor bundle: `%1%`: %2% profiles loaded.") % path_string % presets_loaded;
    this->vendor_profile = &first_vendor->second;
    return true;
}

Bundle::Bundle(Bundle &&other)
    : preset_bundle(std::move(other.preset_bundle))
    , vendor_profile(other.vendor_profile)
    , is_in_resources(other.is_in_resources)
    , is_prusa_bundle(other.is_prusa_bundle)
{
    other.vendor_profile = nullptr;
}

BundleMap BundleMap::load()
{
    BundleMap res;

    const auto vendor_dir = (boost::filesystem::path(Slic3r::data_dir()) / "vendor").make_preferred();
    const auto rsrc_vendor_dir = (boost::filesystem::path(resources_dir()) / "profiles").make_preferred();

    auto prusa_bundle_path = (vendor_dir / PresetBundle::PRUSA_BUNDLE).replace_extension(".ini");
    auto prusa_bundle_rsrc = false;
    if (! boost::filesystem::exists(prusa_bundle_path)) {
        prusa_bundle_path = (rsrc_vendor_dir / PresetBundle::PRUSA_BUNDLE).replace_extension(".ini");
        prusa_bundle_rsrc = true;
    }
    {
        Bundle prusa_bundle;
        if (prusa_bundle.load(std::move(prusa_bundle_path), prusa_bundle_rsrc, true))
            res.emplace(PresetBundle::PRUSA_BUNDLE, std::move(prusa_bundle)); 
    }

    // Load the other bundles in the datadir/vendor directory
    // and then additionally from resources/profiles.
    bool is_in_resources = false;
    for (auto dir : { &vendor_dir, &rsrc_vendor_dir }) {
        for (const auto &dir_entry : boost::filesystem::directory_iterator(*dir)) {
            if (Slic3r::is_ini_file(dir_entry)) {
                std::string id = dir_entry.path().stem().string();  // stem() = filename() without the trailing ".ini" part

                // Don't load this bundle if we've already loaded it.
                if (res.find(id) != res.end()) { continue; }

                Bundle bundle;
                if (bundle.load(dir_entry.path(), is_in_resources))
                    res.emplace(std::move(id), std::move(bundle));
            }
        }

        is_in_resources = true;
    }

    return res;
}

Bundle& BundleMap::prusa_bundle()
{
    auto it = find(PresetBundle::PRUSA_BUNDLE);
    if (it == end()) {
        throw std::runtime_error("ConfigWizard: Internal error in BundleMap: PRUSA_BUNDLE not loaded");
    }

    return it->second;
}

const Bundle& BundleMap::prusa_bundle() const
{
    return const_cast<BundleMap*>(this)->prusa_bundle();
}


// Printer model picker GUI control

struct PrinterPickerEvent : public wxEvent
{
    std::string vendor_id;
    std::string model_id;
    std::string variant_name;
    bool enable;

    PrinterPickerEvent(wxEventType eventType, int winid, std::string vendor_id, std::string model_id, std::string variant_name, bool enable)
        : wxEvent(winid, eventType)
        , vendor_id(std::move(vendor_id))
        , model_id(std::move(model_id))
        , variant_name(std::move(variant_name))
        , enable(enable)
    {}

    virtual wxEvent *Clone() const
    {
        return new PrinterPickerEvent(*this);
    }
};

wxDEFINE_EVENT(EVT_PRINTER_PICK, PrinterPickerEvent);

const std::string PrinterPicker::PRINTER_PLACEHOLDER = "printer_placeholder.png";

PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxString title, size_t max_cols, const AppConfig &appconfig, const ModelFilter &filter)
    : wxPanel(parent)
    , vendor_id(vendor.id)
    , width(0)
{
    const auto &models = vendor.models;

    auto *sizer = new wxBoxSizer(wxVERTICAL);

    const auto font_title = GetFont().MakeBold().Scaled(1.3f);
    const auto font_name = GetFont().MakeBold();
    const auto font_alt_nozzle = GetFont().Scaled(0.9f);

    // wxGrid appends widgets by rows, but we need to construct them in columns.
    // These vectors are used to hold the elements so that they can be appended in the right order.
    std::vector<wxStaticText*> titles;
    std::vector<wxStaticBitmap*> bitmaps;
    std::vector<wxPanel*> variants_panels;

    int max_row_width = 0;
    int current_row_width = 0;

    bool is_variants = false;

    for (const auto &model : models) {
        if (! filter(model)) { continue; }

        wxBitmap bitmap;
        int bitmap_width = 0;
        const wxString bitmap_file = GUI::from_u8(Slic3r::resources_dir() + "/profiles/" + vendor.id + "/" + model.id + "_thumbnail.png");
        if (wxFileExists(bitmap_file)) {
            bitmap.LoadFile(bitmap_file, wxBITMAP_TYPE_PNG);
            bitmap_width = bitmap.GetWidth();
        } else {
            BOOST_LOG_TRIVIAL(warning) << boost::format("Can't find bitmap file `%1%` for vendor `%2%`, printer `%3%`, using placeholder icon instead")
                % bitmap_file
                % vendor.id
                % model.id;

            const wxString placeholder_file = GUI::from_u8(Slic3r::var(PRINTER_PLACEHOLDER));
            if (wxFileExists(placeholder_file)) {
                bitmap.LoadFile(placeholder_file, wxBITMAP_TYPE_PNG);
                bitmap_width = bitmap.GetWidth();
            }
        }

        auto *title = new wxStaticText(this, wxID_ANY, model.name, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
        title->SetFont(font_name);
        const int wrap_width = std::max((int)MODEL_MIN_WRAP, bitmap_width);
        title->Wrap(wrap_width);

        current_row_width += wrap_width;
        if (titles.size() % max_cols == max_cols - 1) {
            max_row_width = std::max(max_row_width, current_row_width);
            current_row_width = 0;
        }

        titles.push_back(title);

        auto *bitmap_widget = new wxStaticBitmap(this, wxID_ANY, bitmap);
        bitmaps.push_back(bitmap_widget);

        auto *variants_panel = new wxPanel(this);
        auto *variants_sizer = new wxBoxSizer(wxVERTICAL);
        variants_panel->SetSizer(variants_sizer);
        const auto model_id = model.id;

        for (size_t i = 0; i < model.variants.size(); i++) {
            const auto &variant = model.variants[i];

            const auto label = model.technology == ptFFF
                ? from_u8((boost::format("%1% %2% %3%") % variant.name % _utf8(L("mm")) % _utf8(L("nozzle"))).str())
                : from_u8(model.name);

            if (i == 1) {
                auto *alt_label = new wxStaticText(variants_panel, wxID_ANY, _(L("Alternate nozzles:")));
                alt_label->SetFont(font_alt_nozzle);
                variants_sizer->Add(alt_label, 0, wxBOTTOM, 3);
                is_variants = true;
            }

            auto *cbox = new Checkbox(variants_panel, label, model_id, variant.name);
            i == 0 ? cboxes.push_back(cbox) : cboxes_alt.push_back(cbox);

            const bool enabled = appconfig.get_variant(vendor.id, model_id, variant.name);
            cbox->SetValue(enabled);

            variants_sizer->Add(cbox, 0, wxBOTTOM, 3);

            cbox->Bind(wxEVT_CHECKBOX, [this, cbox](wxCommandEvent &event) {
                on_checkbox(cbox, event.IsChecked());
            });
        }

        variants_panels.push_back(variants_panel);
    }

    width = std::max(max_row_width, current_row_width);

    const size_t cols = std::min(max_cols, titles.size());

    auto *printer_grid = new wxFlexGridSizer(cols, 0, 20);
    printer_grid->SetFlexibleDirection(wxVERTICAL | wxHORIZONTAL);

    if (titles.size() > 0) {
        const size_t odd_items = titles.size() % cols;

        for (size_t i = 0; i < titles.size() - odd_items; i += cols) {
            for (size_t j = i; j < i + cols; j++) { printer_grid->Add(titles[j], 0, wxBOTTOM, 3); }
            for (size_t j = i; j < i + cols; j++) { printer_grid->Add(bitmaps[j], 0, wxBOTTOM, 20); }
            for (size_t j = i; j < i + cols; j++) { printer_grid->Add(variants_panels[j]); }

            // Add separator space
            if (i > 0) {
                for (size_t j = i; j < i + cols; j++) { printer_grid->Add(1, 100); }
            }
        }

        if (odd_items > 0) {
            for (size_t i = 0; i < cols; i++) { printer_grid->Add(1, 100); }

            const size_t rem = titles.size() - odd_items;

            for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(titles[i], 0, wxBOTTOM, 3); }
            for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
            for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(bitmaps[i], 0, wxBOTTOM, 20); }
            for (size_t i = 0; i < cols - odd_items; i++) { printer_grid->AddSpacer(1); }
            for (size_t i = rem; i < titles.size(); i++) { printer_grid->Add(variants_panels[i]); }
        }
    }

    auto *title_sizer = new wxBoxSizer(wxHORIZONTAL);
    if (! title.IsEmpty()) {
        auto *title_widget = new wxStaticText(this, wxID_ANY, title);
        title_widget->SetFont(font_title);
        title_sizer->Add(title_widget);
    }
    title_sizer->AddStretchSpacer();

    if (/*titles.size() > 1*/is_variants) {
        // It only makes sense to add the All / None buttons if there's multiple printers

        auto *sel_all_std = new wxButton(this, wxID_ANY, titles.size() > 1 ? _(L("All standard")) : _(L("Standard")));
        auto *sel_all = new wxButton(this, wxID_ANY, _(L("All")));
        auto *sel_none = new wxButton(this, wxID_ANY, _(L("None")));
        sel_all_std->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(true, false); });
        sel_all->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(true, true); });
        sel_none->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->select_all(false); });
        title_sizer->Add(sel_all_std, 0, wxRIGHT, BTN_SPACING);
        title_sizer->Add(sel_all, 0, wxRIGHT, BTN_SPACING);
        title_sizer->Add(sel_none);

        // fill button indexes used later for buttons rescaling
        m_button_indexes = { sel_all_std->GetId(), sel_all->GetId(), sel_none->GetId() };
    }

    sizer->Add(title_sizer, 0, wxEXPAND | wxBOTTOM, BTN_SPACING);
    sizer->Add(printer_grid);

    SetSizer(sizer);
}

PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, wxString title, size_t max_cols, const AppConfig &appconfig)
    : PrinterPicker(parent, vendor, std::move(title), max_cols, appconfig, [](const VendorProfile::PrinterModel&) { return true; })
{}

void PrinterPicker::select_all(bool select, bool alternates)
{
    for (const auto &cb : cboxes) {
        if (cb->GetValue() != select) {
            cb->SetValue(select);
            on_checkbox(cb, select);
        }
    }

    if (! select) { alternates = false; }

    for (const auto &cb : cboxes_alt) {
        if (cb->GetValue() != alternates) {
            cb->SetValue(alternates);
            on_checkbox(cb, alternates);
        }
    }
}

void PrinterPicker::select_one(size_t i, bool select)
{
    if (i < cboxes.size() && cboxes[i]->GetValue() != select) {
        cboxes[i]->SetValue(select);
        on_checkbox(cboxes[i], select);
    }
}

bool PrinterPicker::any_selected() const
{
    for (const auto &cb : cboxes) {
        if (cb->GetValue()) { return true; }
    }

    for (const auto &cb : cboxes_alt) {
        if (cb->GetValue()) { return true; }
    }

    return false;
}

std::set<std::string> PrinterPicker::get_selected_models() const 
{
    std::set<std::string> ret_set;

    for (const auto& cb : cboxes)
        if (cb->GetValue())
            ret_set.emplace(cb->model);

    for (const auto& cb : cboxes_alt)
        if (cb->GetValue())
            ret_set.emplace(cb->model);

    return ret_set;
}

void PrinterPicker::on_checkbox(const Checkbox *cbox, bool checked)
{
    PrinterPickerEvent evt(EVT_PRINTER_PICK, GetId(), vendor_id, cbox->model, cbox->variant, checked);
    AddPendingEvent(evt);
}


// Wizard page base

ConfigWizardPage::ConfigWizardPage(ConfigWizard *parent, wxString title, wxString shortname, unsigned indent)
    : wxPanel(parent->p->hscroll)
    , parent(parent)
    , shortname(std::move(shortname))
    , indent(indent)
{
    auto *sizer = new wxBoxSizer(wxVERTICAL);

    auto *text = new wxStaticText(this, wxID_ANY, std::move(title), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
    const auto font = GetFont().MakeBold().Scaled(1.5);
    text->SetFont(font);
    sizer->Add(text, 0, wxALIGN_LEFT, 0);
    sizer->AddSpacer(10);

    content = new wxBoxSizer(wxVERTICAL);
    sizer->Add(content, 1, wxEXPAND);

    SetSizer(sizer);

    this->Hide();

    Bind(wxEVT_SIZE, [this](wxSizeEvent &event) {
        this->Layout();
        event.Skip();
    });
}

ConfigWizardPage::~ConfigWizardPage() {}

wxStaticText* ConfigWizardPage::append_text(wxString text)
{
    auto *widget = new wxStaticText(this, wxID_ANY, text, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
    widget->Wrap(WRAP_WIDTH);
    widget->SetMinSize(wxSize(WRAP_WIDTH, -1));
    append(widget);
    return widget;
}

void ConfigWizardPage::append_spacer(int space)
{
    // FIXME: scaling
    content->AddSpacer(space);
}


// Wizard pages

PageWelcome::PageWelcome(ConfigWizard *parent)
    : ConfigWizardPage(parent, from_u8((boost::format(
#ifdef __APPLE__
            _utf8(L("Welcome to the %s Configuration Assistant"))
#else
            _utf8(L("Welcome to the %s Configuration Wizard"))
#endif
            ) % SLIC3R_APP_NAME).str()), _(L("Welcome")))
    , welcome_text(append_text(from_u8((boost::format(
        _utf8(L("Hello, welcome to %s! This %s helps you with the initial configuration; just a few settings and you will be ready to print.")))
        % SLIC3R_APP_NAME
        % _utf8(ConfigWizard::name())).str())
    ))
    , cbox_reset(append(
        new wxCheckBox(this, wxID_ANY, _(L("Remove user profiles - install from scratch (a snapshot will be taken beforehand)")))
    ))
{
    welcome_text->Hide();
    cbox_reset->Hide();
}

void PageWelcome::set_run_reason(ConfigWizard::RunReason run_reason)
{
    const bool data_empty = run_reason == ConfigWizard::RR_DATA_EMPTY;
    welcome_text->Show(data_empty);
    cbox_reset->Show(!data_empty);
}


PagePrinters::PagePrinters(ConfigWizard *parent,
    wxString title,
    wxString shortname,
    const VendorProfile &vendor,
    unsigned indent,
    Technology technology)
    : ConfigWizardPage(parent, std::move(title), std::move(shortname), indent)
    , technology(technology)
    , install(false)   // only used for 3rd party vendors
{
    enum {
        COL_SIZE = 200,
    };

    AppConfig *appconfig = &this->wizard_p()->appconfig_new;

    const auto families = vendor.families();
    for (const auto &family : families) {
        const auto filter = [&](const VendorProfile::PrinterModel &model) {
            return ((model.technology == ptFFF && technology & T_FFF)
                    || (model.technology == ptSLA && technology & T_SLA))
                && model.family == family;
        };

        if (std::find_if(vendor.models.begin(), vendor.models.end(), filter) == vendor.models.end()) {
            continue;
        }

        const auto picker_title = family.empty() ? wxString() : from_u8((boost::format(_utf8(L("%s Family"))) % family).str());
        auto *picker = new PrinterPicker(this, vendor, picker_title, MAX_COLS, *appconfig, filter);

        picker->Bind(EVT_PRINTER_PICK, [this, appconfig](const PrinterPickerEvent &evt) {
            appconfig->set_variant(evt.vendor_id, evt.model_id, evt.variant_name, evt.enable);
            wizard_p()->on_printer_pick(this, evt);
        });

        append(new wxStaticLine(this));

        append(picker);
        printer_pickers.push_back(picker);
    }
}

void PagePrinters::select_all(bool select, bool alternates)
{
    for (auto picker : printer_pickers) {
        picker->select_all(select, alternates);
    }
}

int PagePrinters::get_width() const
{
    return std::accumulate(printer_pickers.begin(), printer_pickers.end(), 0,
        [](int acc, const PrinterPicker *picker) { return std::max(acc, picker->get_width()); });
}

bool PagePrinters::any_selected() const
{
    for (const auto *picker : printer_pickers) {
        if (picker->any_selected()) { return true; }
    }

    return false;
}

std::set<std::string> PagePrinters::get_selected_models()
{
    std::set<std::string> ret_set;

    for (const auto *picker : printer_pickers)
    {
        std::set<std::string> tmp_models = picker->get_selected_models();
        ret_set.insert(tmp_models.begin(), tmp_models.end());
    }

    return ret_set;
}

void PagePrinters::set_run_reason(ConfigWizard::RunReason run_reason)
{
    if (technology == T_FFF
        && (run_reason == ConfigWizard::RR_DATA_EMPTY || run_reason == ConfigWizard::RR_DATA_LEGACY)
        && printer_pickers.size() > 0 
        && printer_pickers[0]->vendor_id == PresetBundle::PRUSA_BUNDLE) {
        printer_pickers[0]->select_one(0, true);
    }
}


const std::string PageMaterials::EMPTY;

PageMaterials::PageMaterials(ConfigWizard *parent, Materials *materials, wxString title, wxString shortname, wxString list1name)
    : ConfigWizardPage(parent, std::move(title), std::move(shortname))
    , materials(materials)
    , list_l1(new StringList(this))
    , list_l2(new StringList(this))
    , list_l3(new PresetList(this))
{
    append_spacer(VERTICAL_SPACING);

    const int em = parent->em_unit();
    const int list_h = 30*em;

    list_l1->SetMinSize(wxSize(8*em, list_h));
    list_l2->SetMinSize(wxSize(13*em, list_h));
    list_l3->SetMinSize(wxSize(25*em, list_h));

    auto *grid = new wxFlexGridSizer(3, em/2, em);
    grid->AddGrowableCol(2, 1);
    grid->AddGrowableRow(1, 1);

    grid->Add(new wxStaticText(this, wxID_ANY, list1name));
    grid->Add(new wxStaticText(this, wxID_ANY, _(L("Vendor:"))));
    grid->Add(new wxStaticText(this, wxID_ANY, _(L("Profile:"))));

    grid->Add(list_l1, 0, wxEXPAND);
    grid->Add(list_l2, 0, wxEXPAND);
    grid->Add(list_l3, 1, wxEXPAND);

    auto *btn_sizer = new wxBoxSizer(wxHORIZONTAL);
    auto *sel_all = new wxButton(this, wxID_ANY, _(L("All")));
    auto *sel_none = new wxButton(this, wxID_ANY, _(L("None")));
    btn_sizer->Add(sel_all, 0, wxRIGHT, em / 2);
    btn_sizer->Add(sel_none);

    grid->Add(new wxBoxSizer(wxHORIZONTAL));
    grid->Add(new wxBoxSizer(wxHORIZONTAL));
    grid->Add(btn_sizer, 0, wxALIGN_RIGHT);

    append(grid, 1, wxEXPAND);

    list_l1->Bind(wxEVT_LISTBOX, [this](wxCommandEvent &) {
        update_lists(list_l1->GetSelection(), list_l2->GetSelection());
    });
    list_l2->Bind(wxEVT_LISTBOX, [this](wxCommandEvent &) {
        update_lists(list_l1->GetSelection(), list_l2->GetSelection());
    });

    list_l3->Bind(wxEVT_CHECKLISTBOX, [this](wxCommandEvent &evt) { select_material(evt.GetInt()); });

    sel_all->Bind(wxEVT_BUTTON, [this](wxCommandEvent &) { select_all(true); });
    sel_none->Bind(wxEVT_BUTTON, [this](wxCommandEvent &) { select_all(false); });

    reload_presets();
}

void PageMaterials::reload_presets()
{
    clear();

    list_l1->append(_(L("(All)")), &EMPTY);

    for (const std::string &type : materials->types) {
        list_l1->append(type, &type);
    }

    if (list_l1->GetCount() > 0) {
        list_l1->SetSelection(0);
        sel1_prev = wxNOT_FOUND;
        sel2_prev = wxNOT_FOUND;
        update_lists(0, 0);
    }

    presets_loaded = true;
}

void PageMaterials::update_lists(int sel1, int sel2)
{
    wxWindowUpdateLocker freeze_guard(this);
    (void)freeze_guard;

    if (sel1 != sel1_prev) {
        // Refresh the second list

        // XXX: The vendor list is created with quadratic complexity here,
        // but the number of vendors is going to be very small this shouldn't be a problem.

        list_l2->Clear();
        list_l2->append(_(L("(All)")), &EMPTY);
        if (sel1 != wxNOT_FOUND) {
            const std::string &type = list_l1->get_data(sel1);

            materials->filter_presets(type, EMPTY, [this](const Preset *p) {
                const std::string &vendor = this->materials->get_vendor(p);

                if (list_l2->find(vendor) == wxNOT_FOUND) {
                    list_l2->append(vendor, &vendor);
                }
            });
        }

        sel1_prev = sel1;
        sel2 = 0;
        sel2_prev = wxNOT_FOUND;
        list_l2->SetSelection(sel2);
        list_l3->Clear();
    }

    if (sel2 != sel2_prev) {
        // Refresh the third list

        list_l3->Clear();
        if (sel1 != wxNOT_FOUND && sel2 != wxNOT_FOUND) {
            const std::string &type = list_l1->get_data(sel1);
            const std::string &vendor = list_l2->get_data(sel2);

            materials->filter_presets(type, vendor, [this](const Preset *p) {
                bool was_checked = false;

                int cur_i = list_l3->find(p->alias);
                if (cur_i == wxNOT_FOUND)
                    cur_i = list_l3->append(p->alias, &p->alias);
                else
                    was_checked = list_l3->IsChecked(cur_i);

                const std::string& section = materials->appconfig_section();

                const bool checked = wizard_p()->appconfig_new.has(section, p->name);
                list_l3->Check(cur_i, checked | was_checked);

                /* Update preset selection in config.
                 * If one preset from aliases bundle is selected, 
                 * than mark all presets with this aliases as selected  
                 * */
                if (checked && !was_checked)
                    wizard_p()->update_presets_in_config(section, p->alias, true);
                else if (!checked && was_checked)
                    wizard_p()->appconfig_new.set(section, p->name, "1");
            } );
        }

        sel2_prev = sel2;
    }
}

void PageMaterials::select_material(int i)
{
    const bool checked = list_l3->IsChecked(i);

    const std::string& alias_key = list_l3->get_data(i);
    wizard_p()->update_presets_in_config(materials->appconfig_section(), alias_key, checked);
}

void PageMaterials::select_all(bool select)
{
    wxWindowUpdateLocker freeze_guard(this);
    (void)freeze_guard;

    for (unsigned i = 0; i < list_l3->GetCount(); i++) {
        const bool current = list_l3->IsChecked(i);
        if (current != select) {
            list_l3->Check(i, select);
            select_material(i);
        }
    }
}

void PageMaterials::clear()
{
    list_l1->Clear();
    list_l2->Clear();
    list_l3->Clear();
    sel1_prev = wxNOT_FOUND;
    sel2_prev = wxNOT_FOUND;
    presets_loaded = false;
}

void PageMaterials::on_activate()
{
    if (! presets_loaded) {
        wizard_p()->update_materials(materials->technology);
        reload_presets();
    }
}


const char *PageCustom::default_profile_name = "My Settings";

PageCustom::PageCustom(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Custom Printer Setup")), _(L("Custom Printer")))
{
    cb_custom = new wxCheckBox(this, wxID_ANY, _(L("Define a custom printer profile")));
    tc_profile_name = new wxTextCtrl(this, wxID_ANY, default_profile_name);
    auto *label = new wxStaticText(this, wxID_ANY, _(L("Custom profile name:")));

    tc_profile_name->Enable(false);
    tc_profile_name->Bind(wxEVT_KILL_FOCUS, [this](wxFocusEvent &evt) {
        if (tc_profile_name->GetValue().IsEmpty()) {
            if (profile_name_prev.IsEmpty()) { tc_profile_name->SetValue(default_profile_name); }
            else { tc_profile_name->SetValue(profile_name_prev); }
        } else {
            profile_name_prev = tc_profile_name->GetValue();
        }
        evt.Skip();
    });

    cb_custom->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) {
        tc_profile_name->Enable(custom_wanted());
        wizard_p()->on_custom_setup(custom_wanted());
		
    });

    append(cb_custom);
    append(label);
    append(tc_profile_name);
}

PageUpdate::PageUpdate(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Automatic updates")), _(L("Updates")))
    , version_check(true)
    , preset_update(true)
{
    const AppConfig *app_config = wxGetApp().app_config;
    auto boldfont = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
    boldfont.SetWeight(wxFONTWEIGHT_BOLD);

    auto *box_slic3r = new wxCheckBox(this, wxID_ANY, _(L("Check for application updates")));
    box_slic3r->SetValue(app_config->get("version_check") == "1");
    append(box_slic3r);
    append_text(wxString::Format(_(L(
        "If enabled, %s checks for new application versions online. When a new version becomes available, "
         "a notification is displayed at the next application startup (never during program usage). "
         "This is only a notification mechanisms, no automatic installation is done.")), SLIC3R_APP_NAME));

    append_spacer(VERTICAL_SPACING);

    auto *box_presets = new wxCheckBox(this, wxID_ANY, _(L("Update built-in Presets automatically")));
    box_presets->SetValue(app_config->get("preset_update") == "1");
    append(box_presets);
    append_text(wxString::Format(_(L(
        "If enabled, %s downloads updates of built-in system presets in the background."
        "These updates are downloaded into a separate temporary location."
        "When a new preset version becomes available it is offered at application startup.")), SLIC3R_APP_NAME));
    const auto text_bold = _(L("Updates are never applied without user's consent and never overwrite user's customized settings."));
    auto *label_bold = new wxStaticText(this, wxID_ANY, text_bold);
    label_bold->SetFont(boldfont);
    label_bold->Wrap(WRAP_WIDTH);
    append(label_bold);
    append_text(_(L("Additionally a backup snapshot of the whole configuration is created before an update is applied.")));

    box_slic3r->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) { this->version_check = event.IsChecked(); });
    box_presets->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) { this->preset_update = event.IsChecked(); });
}

PageReloadFromDisk::PageReloadFromDisk(ConfigWizard* parent)
    : ConfigWizardPage(parent, _(L("Reload from disk")), _(L("Reload from disk")))
    , full_pathnames(false)
{
    auto* box_pathnames = new wxCheckBox(this, wxID_ANY, _(L("Export full pathnames of models and parts sources into 3mf and amf files")));
    box_pathnames->SetValue(wxGetApp().app_config->get("export_sources_full_pathnames") == "1");
    append(box_pathnames);
    append_text(_(L(
        "If enabled, allows the Reload from disk command to automatically find and load the files when invoked.\n"
        "If not enabled, the Reload from disk command will ask to select each file using an open file dialog."
    )));

    box_pathnames->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent& event) { this->full_pathnames = event.IsChecked(); });
}

PageMode::PageMode(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("View mode")), _(L("View mode")))
{
    append_text(_(L("PrusaSlicer's user interfaces comes in three variants:\nSimple, Advanced, and Expert.\n"
        "The Simple mode shows only the most frequently used settings relevant for regular 3D printing. "
        "The other two offer progressively more sophisticated fine-tuning, "
        "they are suitable for advanced and expert users, respectively.")));

    radio_simple = new wxRadioButton(this, wxID_ANY, _(L("Simple mode")));
    radio_advanced = new wxRadioButton(this, wxID_ANY, _(L("Advanced mode")));
    radio_expert = new wxRadioButton(this, wxID_ANY, _(L("Expert mode")));

    append(radio_simple);
    append(radio_advanced);
    append(radio_expert);
}

void PageMode::on_activate()
{
    std::string mode { "simple" };
    wxGetApp().app_config->get("", "view_mode", mode);

    if (mode == "advanced") { radio_advanced->SetValue(true); }
    else if (mode == "expert") { radio_expert->SetValue(true); }
    else { radio_simple->SetValue(true); }
}

void PageMode::serialize_mode(AppConfig *app_config) const
{
    std::string mode = "";

    if (radio_simple->GetValue()) { mode = "simple"; }
    if (radio_advanced->GetValue()) { mode = "advanced"; }
    if (radio_expert->GetValue()) { mode = "expert"; }

    // If "Mode" page wasn't selected (no one radiobutton is checked),
    // we shouldn't to update a view_mode value in app_config
    if (mode.empty())
        return; 

    app_config->set("view_mode", mode);
}

PageVendors::PageVendors(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Other Vendors")), _(L("Other Vendors")))
{
    const AppConfig &appconfig = this->wizard_p()->appconfig_new;

    append_text(wxString::Format(_(L("Pick another vendor supported by %s")), SLIC3R_APP_NAME) + ":");

    auto boldfont = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
    boldfont.SetWeight(wxFONTWEIGHT_BOLD);

    for (const auto &pair : wizard_p()->bundles) {
        const VendorProfile *vendor = pair.second.vendor_profile;
        if (vendor->id == PresetBundle::PRUSA_BUNDLE) { continue; }

        auto *cbox = new wxCheckBox(this, wxID_ANY, vendor->name);
        cbox->Bind(wxEVT_CHECKBOX, [=](wxCommandEvent &event) {
            wizard_p()->on_3rdparty_install(vendor, cbox->IsChecked());
        });

        const auto &vendors = appconfig.vendors();
        const bool enabled = vendors.find(pair.first) != vendors.end();
        if (enabled) {
            cbox->SetValue(true);

            auto pages = wizard_p()->pages_3rdparty.find(vendor->id);
            wxCHECK_RET(pages != wizard_p()->pages_3rdparty.end(), "Internal error: 3rd party vendor printers page not created");

            for (PagePrinters* page : { pages->second.first, pages->second.second })
                if (page) page->install = true;
        }

        append(cbox);
    }
}

PageFirmware::PageFirmware(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Firmware Type")), _(L("Firmware")), 1)
    , gcode_opt(*print_config_def.get("gcode_flavor"))
    , gcode_picker(nullptr)
{
    append_text(_(L("Choose the type of firmware used by your printer.")));
    append_text(_(gcode_opt.tooltip));

    wxArrayString choices;
    choices.Alloc(gcode_opt.enum_labels.size());
    for (const auto &label : gcode_opt.enum_labels) {
        choices.Add(label);
    }

    gcode_picker = new wxChoice(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices);
    const auto &enum_values = gcode_opt.enum_values;
    auto needle = enum_values.cend();
    if (gcode_opt.default_value) {
        needle = std::find(enum_values.cbegin(), enum_values.cend(), gcode_opt.default_value->serialize());
    }
    if (needle != enum_values.cend()) {
        gcode_picker->SetSelection(needle - enum_values.cbegin());
    } else {
        gcode_picker->SetSelection(0);
    }

    append(gcode_picker);
}

void PageFirmware::apply_custom_config(DynamicPrintConfig &config)
{
    auto sel = gcode_picker->GetSelection();
    if (sel >= 0 && (size_t)sel < gcode_opt.enum_labels.size()) {
        auto *opt = new ConfigOptionEnum<GCodeFlavor>(static_cast<GCodeFlavor>(sel));
        config.set_key_value("gcode_flavor", opt);
    }
}

PageBedShape::PageBedShape(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Bed Shape and Size")), _(L("Bed Shape")), 1)
    , shape_panel(new BedShapePanel(this))
{
    append_text(_(L("Set the shape of your printer's bed.")));

    shape_panel->build_panel(*wizard_p()->custom_config->option<ConfigOptionPoints>("bed_shape"),
        *wizard_p()->custom_config->option<ConfigOptionString>("bed_custom_texture"),
        *wizard_p()->custom_config->option<ConfigOptionString>("bed_custom_model"));

    append(shape_panel);
}

void PageBedShape::apply_custom_config(DynamicPrintConfig &config)
{
    const std::vector<Vec2d>& points = shape_panel->get_shape();
    const std::string& custom_texture = shape_panel->get_custom_texture();
    const std::string& custom_model = shape_panel->get_custom_model();
    config.set_key_value("bed_shape", new ConfigOptionPoints(points));
    config.set_key_value("bed_custom_texture", new ConfigOptionString(custom_texture));
    config.set_key_value("bed_custom_model", new ConfigOptionString(custom_model));
}

PageDiameters::PageDiameters(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Filament and Nozzle Diameters")), _(L("Print Diameters")), 1)
    , spin_nozzle(new wxSpinCtrlDouble(this, wxID_ANY))
    , spin_filam(new wxSpinCtrlDouble(this, wxID_ANY))
{
    spin_nozzle->SetDigits(2);
    spin_nozzle->SetIncrement(0.1);
    auto *default_nozzle = print_config_def.get("nozzle_diameter")->get_default_value<ConfigOptionFloats>();
    spin_nozzle->SetValue(default_nozzle != nullptr && default_nozzle->size() > 0 ? default_nozzle->get_at(0) : 0.5);

    spin_filam->SetDigits(2);
    spin_filam->SetIncrement(0.25);
    auto *default_filam = print_config_def.get("filament_diameter")->get_default_value<ConfigOptionFloats>();
    spin_filam->SetValue(default_filam != nullptr && default_filam->size() > 0 ? default_filam->get_at(0) : 3.0);

    append_text(_(L("Enter the diameter of your printer's hot end nozzle.")));

    auto *sizer_nozzle = new wxFlexGridSizer(3, 5, 5);
    auto *text_nozzle = new wxStaticText(this, wxID_ANY, _(L("Nozzle Diameter:")));
    auto *unit_nozzle = new wxStaticText(this, wxID_ANY, _(L("mm")));
    sizer_nozzle->AddGrowableCol(0, 1);
    sizer_nozzle->Add(text_nozzle, 0, wxALIGN_CENTRE_VERTICAL);
    sizer_nozzle->Add(spin_nozzle);
    sizer_nozzle->Add(unit_nozzle, 0, wxALIGN_CENTRE_VERTICAL);
    append(sizer_nozzle);

    append_spacer(VERTICAL_SPACING);

    append_text(_(L("Enter the diameter of your filament.")));
    append_text(_(L("Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average.")));

    auto *sizer_filam = new wxFlexGridSizer(3, 5, 5);
    auto *text_filam = new wxStaticText(this, wxID_ANY, _(L("Filament Diameter:")));
    auto *unit_filam = new wxStaticText(this, wxID_ANY, _(L("mm")));
    sizer_filam->AddGrowableCol(0, 1);
    sizer_filam->Add(text_filam, 0, wxALIGN_CENTRE_VERTICAL);
    sizer_filam->Add(spin_filam);
    sizer_filam->Add(unit_filam, 0, wxALIGN_CENTRE_VERTICAL);
    append(sizer_filam);
}

void PageDiameters::apply_custom_config(DynamicPrintConfig &config)
{
    auto *opt_nozzle = new ConfigOptionFloats(1, spin_nozzle->GetValue());
    config.set_key_value("nozzle_diameter", opt_nozzle);
    auto *opt_filam = new ConfigOptionFloats(1, spin_filam->GetValue());
    config.set_key_value("filament_diameter", opt_filam);

    auto set_extrusion_width = [&config, opt_nozzle](const char *key, double dmr) {
        char buf[64];
        sprintf(buf, "%.2lf", dmr * opt_nozzle->values.front() / 0.4);
        config.set_key_value(key, new ConfigOptionFloatOrPercent(atof(buf), false));
    };

    set_extrusion_width("support_material_extrusion_width",   0.35);
    set_extrusion_width("top_infill_extrusion_width",		  0.40);
    set_extrusion_width("first_layer_extrusion_width",		  0.42);

    set_extrusion_width("extrusion_width",					  0.45);
    set_extrusion_width("perimeter_extrusion_width",		  0.45);
    set_extrusion_width("external_perimeter_extrusion_width", 0.45);
    set_extrusion_width("infill_extrusion_width",			  0.45);
    set_extrusion_width("solid_infill_extrusion_width",       0.45);
}

PageTemperatures::PageTemperatures(ConfigWizard *parent)
    : ConfigWizardPage(parent, _(L("Extruder and Bed Temperatures")), _(L("Temperatures")), 1)
    , spin_extr(new wxSpinCtrlDouble(this, wxID_ANY))
    , spin_bed(new wxSpinCtrlDouble(this, wxID_ANY))
{
    spin_extr->SetIncrement(5.0);
    const auto &def_extr = *print_config_def.get("temperature");
    spin_extr->SetRange(def_extr.min, def_extr.max);
    auto *default_extr = def_extr.get_default_value<ConfigOptionInts>();
    spin_extr->SetValue(default_extr != nullptr && default_extr->size() > 0 ? default_extr->get_at(0) : 200);

    spin_bed->SetIncrement(5.0);
    const auto &def_bed = *print_config_def.get("bed_temperature");
    spin_bed->SetRange(def_bed.min, def_bed.max);
    auto *default_bed = def_bed.get_default_value<ConfigOptionInts>();
    spin_bed->SetValue(default_bed != nullptr && default_bed->size() > 0 ? default_bed->get_at(0) : 0);

    append_text(_(L("Enter the temperature needed for extruding your filament.")));
    append_text(_(L("A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS.")));

    auto *sizer_extr = new wxFlexGridSizer(3, 5, 5);
    auto *text_extr = new wxStaticText(this, wxID_ANY, _(L("Extrusion Temperature:")));
    auto *unit_extr = new wxStaticText(this, wxID_ANY, _(L("°C")));
    sizer_extr->AddGrowableCol(0, 1);
    sizer_extr->Add(text_extr, 0, wxALIGN_CENTRE_VERTICAL);
    sizer_extr->Add(spin_extr);
    sizer_extr->Add(unit_extr, 0, wxALIGN_CENTRE_VERTICAL);
    append(sizer_extr);

    append_spacer(VERTICAL_SPACING);

    append_text(_(L("Enter the bed temperature needed for getting your filament to stick to your heated bed.")));
    append_text(_(L("A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed.")));

    auto *sizer_bed = new wxFlexGridSizer(3, 5, 5);
    auto *text_bed = new wxStaticText(this, wxID_ANY, _(L("Bed Temperature:")));
    auto *unit_bed = new wxStaticText(this, wxID_ANY, _(L("°C")));
    sizer_bed->AddGrowableCol(0, 1);
    sizer_bed->Add(text_bed, 0, wxALIGN_CENTRE_VERTICAL);
    sizer_bed->Add(spin_bed);
    sizer_bed->Add(unit_bed, 0, wxALIGN_CENTRE_VERTICAL);
    append(sizer_bed);
}

void PageTemperatures::apply_custom_config(DynamicPrintConfig &config)
{
    auto *opt_extr = new ConfigOptionInts(1, spin_extr->GetValue());
    config.set_key_value("temperature", opt_extr);
    auto *opt_extr1st = new ConfigOptionInts(1, spin_extr->GetValue());
    config.set_key_value("first_layer_temperature", opt_extr1st);
    auto *opt_bed = new ConfigOptionInts(1, spin_bed->GetValue());
    config.set_key_value("bed_temperature", opt_bed);
    auto *opt_bed1st = new ConfigOptionInts(1, spin_bed->GetValue());
    config.set_key_value("first_layer_bed_temperature", opt_bed1st);
}


// Index

ConfigWizardIndex::ConfigWizardIndex(wxWindow *parent)
    : wxPanel(parent)
    , bg(ScalableBitmap(parent, "PrusaSlicer_192px_transparent.png", 192))
    , bullet_black(ScalableBitmap(parent, "bullet_black.png"))
    , bullet_blue(ScalableBitmap(parent, "bullet_blue.png"))
    , bullet_white(ScalableBitmap(parent, "bullet_white.png"))
    , item_active(NO_ITEM)
    , item_hover(NO_ITEM)
    , last_page((size_t)-1)
{
    SetMinSize(bg.bmp().GetSize());

    const wxSize size = GetTextExtent("m");
    em_w = size.x;
    em_h = size.y;

    // Add logo bitmap.
    // This could be done in on_paint() along with the index labels, but I've found it tricky
    // to get the bitmap rendered well on all platforms with transparent background.
    // In some cases it didn't work at all. And so wxStaticBitmap is used here instead,
    // because it has all the platform quirks figured out.
    auto *sizer = new wxBoxSizer(wxVERTICAL);
    logo = new wxStaticBitmap(this, wxID_ANY, bg.bmp());
    sizer->AddStretchSpacer();
    sizer->Add(logo);
    SetSizer(sizer);

    Bind(wxEVT_PAINT, &ConfigWizardIndex::on_paint, this);
    Bind(wxEVT_MOTION, &ConfigWizardIndex::on_mouse_move, this);

    Bind(wxEVT_LEAVE_WINDOW, [this](wxMouseEvent &evt) {
        if (item_hover != -1) {
            item_hover = -1;
            Refresh();
        }
        evt.Skip();
    });

    Bind(wxEVT_LEFT_UP, [this](wxMouseEvent &evt) {
        if (item_hover >= 0) { go_to(item_hover); }
    });
}

wxDECLARE_EVENT(EVT_INDEX_PAGE, wxCommandEvent);

void ConfigWizardIndex::add_page(ConfigWizardPage *page)
{
    last_page = items.size();
    items.emplace_back(Item { page->shortname, page->indent, page });
    Refresh();
}

void ConfigWizardIndex::add_label(wxString label, unsigned indent)
{
    items.emplace_back(Item { std::move(label), indent, nullptr });
    Refresh();
}

ConfigWizardPage* ConfigWizardIndex::active_page() const
{
    if (item_active >= items.size()) { return nullptr; }

    return items[item_active].page;
}

void ConfigWizardIndex::go_prev()
{
    // Search for a preceiding item that is a page (not a label, ie. page != nullptr)

    if (item_active == NO_ITEM) { return; }

    for (size_t i = item_active; i > 0; i--) {
        if (items[i - 1].page != nullptr) {
            go_to(i - 1);
            return;
        }
    }
}

void ConfigWizardIndex::go_next()
{
    // Search for a next item that is a page (not a label, ie. page != nullptr)

    if (item_active == NO_ITEM) { return; }

    for (size_t i = item_active + 1; i < items.size(); i++) {
        if (items[i].page != nullptr) {
            go_to(i);
            return;
        }
    }
}

// This one actually performs the go-to op
void ConfigWizardIndex::go_to(size_t i)
{
    if (i != item_active
        && i < items.size()
        && items[i].page != nullptr) {
        auto *new_active = items[i].page;
        auto *former_active = active_page();
        if (former_active != nullptr) {
            former_active->Hide();
        }

        item_active = i;
        new_active->Show();

        wxCommandEvent evt(EVT_INDEX_PAGE, GetId());
        AddPendingEvent(evt);

        Refresh();

        new_active->on_activate();
    }
}

void ConfigWizardIndex::go_to(const ConfigWizardPage *page)
{
    if (page == nullptr) { return; }

    for (size_t i = 0; i < items.size(); i++) {
        if (items[i].page == page) {
            go_to(i);
            return;
        }
    }
}

void ConfigWizardIndex::clear()
{
    auto *former_active = active_page();
    if (former_active != nullptr) { former_active->Hide(); }

    items.clear();
    item_active = NO_ITEM;
}

void ConfigWizardIndex::on_paint(wxPaintEvent & evt)
{
    const auto size = GetClientSize();
    if (size.GetHeight() == 0 || size.GetWidth() == 0) { return; }

    wxPaintDC dc(this);

    const auto bullet_w = bullet_black.bmp().GetSize().GetWidth();
    const auto bullet_h = bullet_black.bmp().GetSize().GetHeight();
    const int yoff_icon = bullet_h < em_h ? (em_h - bullet_h) / 2 : 0;
    const int yoff_text = bullet_h > em_h ? (bullet_h - em_h) / 2 : 0;
    const int yinc = item_height();

    int index_width = 0;

    unsigned y = 0;
    for (size_t i = 0; i < items.size(); i++) {
        const Item& item = items[i];
        unsigned x = em_w/2 + item.indent * em_w;

        if (i == item_active || (item_hover >= 0 && i == (size_t)item_hover)) {
            dc.DrawBitmap(bullet_blue.bmp(), x, y + yoff_icon, false);
        }
        else if (i < item_active)  { dc.DrawBitmap(bullet_black.bmp(), x, y + yoff_icon, false); }
        else if (i > item_active)  { dc.DrawBitmap(bullet_white.bmp(), x, y + yoff_icon, false); }

        x += + bullet_w + em_w/2;
        const auto text_size = dc.GetTextExtent(item.label);
        dc.DrawText(item.label, x, y + yoff_text);

        y += yinc;
        index_width = std::max(index_width, (int)x + text_size.x);
    }

    if (GetMinSize().x < index_width) {
        CallAfter([this, index_width]() {
            SetMinSize(wxSize(index_width, GetMinSize().y));
            Refresh();
        });
    }
}

void ConfigWizardIndex::on_mouse_move(wxMouseEvent &evt)
{
    const wxClientDC dc(this);
    const wxPoint pos = evt.GetLogicalPosition(dc);

    const ssize_t item_hover_new = pos.y / item_height();

    if (item_hover_new < ssize_t(items.size()) && item_hover_new != item_hover) {
        item_hover = item_hover_new;
        Refresh();
    }

    evt.Skip();
}

void ConfigWizardIndex::msw_rescale()
{
    const wxSize size = GetTextExtent("m");
    em_w = size.x;
    em_h = size.y;

    bg.msw_rescale();
    SetMinSize(bg.bmp().GetSize());
    logo->SetBitmap(bg.bmp());

    bullet_black.msw_rescale();
    bullet_blue.msw_rescale();
    bullet_white.msw_rescale();
    Refresh();
}


// Materials

const std::string Materials::UNKNOWN = "(Unknown)";

void Materials::push(const Preset *preset)
{
    presets.push_back(preset);
    types.insert(technology & T_FFF
        ? Materials::get_filament_type(preset)
        : Materials::get_material_type(preset));
}

void Materials::clear()
{
    presets.clear();
    types.clear();
}

const std::string& Materials::appconfig_section() const
{
    return (technology & T_FFF) ? AppConfig::SECTION_FILAMENTS : AppConfig::SECTION_MATERIALS;
}

const std::string& Materials::get_type(const Preset *preset) const
{
    return (technology & T_FFF) ? get_filament_type(preset) : get_material_type(preset);
}

const std::string& Materials::get_vendor(const Preset *preset) const
{
    return (technology & T_FFF) ? get_filament_vendor(preset) : get_material_vendor(preset);
}

const std::string& Materials::get_filament_type(const Preset *preset)
{
    const auto *opt = preset->config.opt<ConfigOptionStrings>("filament_type");
    if (opt != nullptr && opt->values.size() > 0) {
        return opt->values[0];
    } else {
        return UNKNOWN;
    }
}

const std::string& Materials::get_filament_vendor(const Preset *preset)
{
    const auto *opt = preset->config.opt<ConfigOptionString>("filament_vendor");
    return opt != nullptr ? opt->value : UNKNOWN;
}

const std::string& Materials::get_material_type(const Preset *preset)
{
    const auto *opt = preset->config.opt<ConfigOptionString>("material_type");
    if (opt != nullptr) {
        return opt->value;
    } else {
        return UNKNOWN;
    }
}

const std::string& Materials::get_material_vendor(const Preset *preset)
{
    const auto *opt = preset->config.opt<ConfigOptionString>("material_vendor");
    return opt != nullptr ? opt->value : UNKNOWN;
}


// priv

static const std::unordered_map<std::string, std::pair<std::string, std::string>> legacy_preset_map {{
    { "Original Prusa i3 MK2.ini",                           std::make_pair("MK2S", "0.4") },
    { "Original Prusa i3 MK2 MM Single Mode.ini",            std::make_pair("MK2SMM", "0.4") },
    { "Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini", std::make_pair("MK2SMM", "0.6") },
    { "Original Prusa i3 MK2 MultiMaterial.ini",             std::make_pair("MK2SMM", "0.4") },
    { "Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini",  std::make_pair("MK2SMM", "0.6") },
    { "Original Prusa i3 MK2 0.25 nozzle.ini",               std::make_pair("MK2S", "0.25") },
    { "Original Prusa i3 MK2 0.6 nozzle.ini",                std::make_pair("MK2S", "0.6") },
    { "Original Prusa i3 MK3.ini",                           std::make_pair("MK3",  "0.4") },
}};

void ConfigWizard::priv::load_pages()
{
    wxWindowUpdateLocker freeze_guard(q);
    (void)freeze_guard;

    const ConfigWizardPage *former_active = index->active_page();

    index->clear();

    index->add_page(page_welcome);

    // Printers
    index->add_page(page_fff);
    index->add_page(page_msla);
    index->add_page(page_vendors);
    for (const auto &pages : pages_3rdparty) {
        for ( PagePrinters* page : { pages.second.first, pages.second.second })
            if (page && page->install)
                index->add_page(page);
    }

    index->add_page(page_custom);
    if (page_custom->custom_wanted()) {
        index->add_page(page_firmware);
        index->add_page(page_bed);
        index->add_page(page_diams);
        index->add_page(page_temps);
    }

    // Filaments & Materials
    if (any_fff_selected) { index->add_page(page_filaments); }
    if (any_sla_selected) { index->add_page(page_sla_materials); }

    // there should to be selected at least one printer
    btn_finish->Enable(any_fff_selected || any_sla_selected || custom_printer_selected);

    index->add_page(page_update);
    index->add_page(page_reload_from_disk);
    index->add_page(page_mode);

    index->go_to(former_active);   // Will restore the active item/page if possible

    q->Layout();
}

void ConfigWizard::priv::init_dialog_size()
{
    // Clamp the Wizard size based on screen dimensions

    const auto idx = wxDisplay::GetFromWindow(q);
    wxDisplay display(idx != wxNOT_FOUND ? idx : 0u);

    const auto disp_rect = display.GetClientArea();
    wxRect window_rect(
        disp_rect.x + disp_rect.width / 20,
        disp_rect.y + disp_rect.height / 20,
        9*disp_rect.width / 10,
        9*disp_rect.height / 10);

    const int width_hint = index->GetSize().GetWidth() + page_fff->get_width() + 30 * em();    // XXX: magic constant, I found no better solution
    if (width_hint < window_rect.width) {
        window_rect.x += (window_rect.width - width_hint) / 2;
        window_rect.width = width_hint;
    }

    q->SetSize(window_rect);
}

void ConfigWizard::priv::load_vendors()
{
    bundles = BundleMap::load();

    // Load up the set of vendors / models / variants the user has had enabled up till now
    AppConfig *app_config = wxGetApp().app_config;
    if (! app_config->legacy_datadir()) {
        appconfig_new.set_vendors(*app_config);
    } else {
        // In case of legacy datadir, try to guess the preference based on the printer preset files that are present
        const auto printer_dir = fs::path(Slic3r::data_dir()) / "printer";
        for (auto &dir_entry : boost::filesystem::directory_iterator(printer_dir))
            if (Slic3r::is_ini_file(dir_entry)) {
                auto needle = legacy_preset_map.find(dir_entry.path().filename().string());
                if (needle == legacy_preset_map.end()) { continue; }

                const auto &model = needle->second.first;
                const auto &variant = needle->second.second;
                appconfig_new.set_variant("PrusaResearch", model, variant, true);
            }
    }

    // Initialize the is_visible flag in printer Presets
    for (auto &pair : bundles) {
        pair.second.preset_bundle->load_installed_printers(appconfig_new);
    }

    if (app_config->has_section(AppConfig::SECTION_FILAMENTS)) {
        appconfig_new.set_section(AppConfig::SECTION_FILAMENTS, app_config->get_section(AppConfig::SECTION_FILAMENTS));
    }
    if (app_config->has_section(AppConfig::SECTION_MATERIALS)) {
        appconfig_new.set_section(AppConfig::SECTION_MATERIALS, app_config->get_section(AppConfig::SECTION_MATERIALS));
    }
}

void ConfigWizard::priv::add_page(ConfigWizardPage *page)
{
    const int proportion = (page->shortname == _(L("Filaments"))) || (page->shortname == _(L("SLA Materials"))) ? 1 : 0;
    hscroll_sizer->Add(page, proportion, wxEXPAND);
    all_pages.push_back(page);
}

void ConfigWizard::priv::enable_next(bool enable)
{
    btn_next->Enable(enable);
    btn_finish->Enable(enable);
}

void ConfigWizard::priv::set_start_page(ConfigWizard::StartPage start_page)
{
    switch (start_page) {
        case ConfigWizard::SP_PRINTERS: 
            index->go_to(page_fff); 
            btn_next->SetFocus();
            break;
        case ConfigWizard::SP_FILAMENTS:
            index->go_to(page_filaments);
            btn_finish->SetFocus();
            break;
        case ConfigWizard::SP_MATERIALS:
            index->go_to(page_sla_materials);
            btn_finish->SetFocus();
            break;
        default:
            index->go_to(page_welcome);
            btn_next->SetFocus();
            break;
    }
}

void ConfigWizard::priv::create_3rdparty_pages()
{
    for (const auto &pair : bundles) {
        const VendorProfile *vendor = pair.second.vendor_profile;
        if (vendor->id == PresetBundle::PRUSA_BUNDLE) { continue; }

        bool is_fff_technology = false;
        bool is_sla_technology = false;

        for (auto& model: vendor->models)
        {
            if (!is_fff_technology && model.technology == ptFFF)
                 is_fff_technology = true;
            if (!is_sla_technology && model.technology == ptSLA)
                 is_sla_technology = true;
        }

        PagePrinters* pageFFF = nullptr;
        PagePrinters* pageSLA = nullptr;

        if (is_fff_technology) {
            pageFFF = new PagePrinters(q, vendor->name + " " +_(L("FFF Technology Printers")), vendor->name+" FFF", *vendor, 1, T_FFF);
            add_page(pageFFF);
        }

        if (is_sla_technology) {
            pageSLA = new PagePrinters(q, vendor->name + " " + _(L("SLA Technology Printers")), vendor->name+" MSLA", *vendor, 1, T_SLA);
            add_page(pageSLA);
        }

        pages_3rdparty.insert({vendor->id, {pageFFF, pageSLA}});
    }
}

void ConfigWizard::priv::set_run_reason(RunReason run_reason)
{
    this->run_reason = run_reason;
    for (auto &page : all_pages) {
        page->set_run_reason(run_reason);
    }
}

void ConfigWizard::priv::update_materials(Technology technology)
{
    if (any_fff_selected && (technology & T_FFF)) {
        filaments.clear();
        aliases_fff.clear();
    
        // Iterate filaments in all bundles
        for (const auto &pair : bundles) {
            for (const auto &filament : pair.second.preset_bundle->filaments) {
                // Check if filament is already added
                if (filaments.containts(&filament)) 
                	continue;
                // Iterate printers in all bundles
                // For now, we only allow the profiles to be compatible with another profiles inside the same bundle.
//                for (const auto &pair : bundles)
                    for (const auto &printer : pair.second.preset_bundle->printers)
                        // Filter out inapplicable printers
                        if (printer.is_visible && printer.printer_technology() == ptFFF && 
                        	is_compatible_with_printer(PresetWithVendorProfile(filament, nullptr), PresetWithVendorProfile(printer, nullptr)) &&
                            // Check if filament is already added
                        	! filaments.containts(&filament)) {
                            filaments.push(&filament);
                            if (!filament.alias.empty())
                                aliases_fff[filament.alias].insert(filament.name);
                        }
            }
        }
    }

    if (any_sla_selected && (technology & T_SLA)) {
        sla_materials.clear();
        aliases_sla.clear();

        // Iterate SLA materials in all bundles
        for (const auto &pair : bundles) {
            for (const auto &material : pair.second.preset_bundle->sla_materials) {
                // Check if material is already added
                if (sla_materials.containts(&material))
                	continue;
                // Iterate printers in all bundles
				// For now, we only allow the profiles to be compatible with another profiles inside the same bundle.
//                for (const auto &pair : bundles) 
                    for (const auto &printer : pair.second.preset_bundle->printers)
                        // Filter out inapplicable printers
                        if (printer.is_visible && printer.printer_technology() == ptSLA && 
                        	is_compatible_with_printer(PresetWithVendorProfile(material, nullptr), PresetWithVendorProfile(printer, nullptr)) &&
                            // Check if material is already added
                        	! sla_materials.containts(&material)) {
                            sla_materials.push(&material);
                            if (!material.alias.empty())
                                aliases_sla[material.alias].insert(material.name);
                        }
            }
        }
    }
}

void ConfigWizard::priv::on_custom_setup(const bool custom_wanted)
{
	custom_printer_selected = custom_wanted;
    load_pages();
}

void ConfigWizard::priv::on_printer_pick(PagePrinters *page, const PrinterPickerEvent &evt)
{
    if (check_sla_selected() != any_sla_selected ||
        check_fff_selected() != any_fff_selected) {
        any_fff_selected = check_fff_selected();
        any_sla_selected = check_sla_selected();

        load_pages();
    }

    // Update the is_visible flag on relevant printer profiles
    for (auto &pair : bundles) {
        if (pair.first != evt.vendor_id) { continue; }

        for (auto &preset : pair.second.preset_bundle->printers) {
            if (preset.config.opt_string("printer_model") == evt.model_id
                && preset.config.opt_string("printer_variant") == evt.variant_name) {
                preset.is_visible = evt.enable;
            }
        }

        // if at list one printer is selected but there in no one selected material,
        // select materials which is default for selected printer(s)
        select_default_materials_if_needed(pair.second.vendor_profile, page->technology, evt.model_id);
    }

    if (page->technology & T_FFF) {
        page_filaments->clear();
    } else if (page->technology & T_SLA) {
        page_sla_materials->clear();
    }
}

void ConfigWizard::priv::select_default_materials_for_printer_model(const std::vector<VendorProfile::PrinterModel>& models, Technology technology, const std::string& model_id)
{
    PageMaterials* page_materials = technology & T_FFF ? page_filaments : page_sla_materials;

    auto it = std::find_if(models.begin(), models.end(), [model_id](VendorProfile::PrinterModel model) {return model_id == model.id; });
    if (it != models.end())
        for (const std::string& material : it->default_materials)
            appconfig_new.set(page_materials->materials->appconfig_section(), material, "1");
}

void ConfigWizard::priv::select_default_materials_if_needed(VendorProfile* vendor_profile, Technology technology, const std::string& model_id)
{
    if ((technology & T_FFF && !any_fff_selected) ||
        (technology & T_SLA && !any_sla_selected) ||
        check_materials_in_config(technology, false))
        return;

    select_default_materials_for_printer_model(vendor_profile->models, technology, model_id);
}

void ConfigWizard::priv::selected_default_materials(Technology technology)
{
    auto select_default_materials_for_printer_page = [this](PagePrinters * page_printers, Technology technology)
    {
        std::set<std::string>   selected_models = page_printers->get_selected_models();
        const std::string       vendor_id       = page_printers->get_vendor_id();

        for (auto& pair : bundles)
        {
            if (pair.first != vendor_id)
                continue;

            for (const std::string& model_id : selected_models)
                select_default_materials_for_printer_model(pair.second.vendor_profile->models, technology, model_id);
        }
    };

    PagePrinters* page_printers = technology & T_FFF ? page_fff : page_msla;
    select_default_materials_for_printer_page(page_printers, technology);

    for (const auto& printer : pages_3rdparty) 
    {
        page_printers = technology & T_FFF ? printer.second.first : printer.second.second;
        if (page_printers)
            select_default_materials_for_printer_page(page_printers, technology);
    }

    update_materials(technology);
    (technology& T_FFF ? page_filaments : page_sla_materials)->reload_presets();
}

void ConfigWizard::priv::on_3rdparty_install(const VendorProfile *vendor, bool install)
{
    auto it = pages_3rdparty.find(vendor->id);
    wxCHECK_RET(it != pages_3rdparty.end(), "Internal error: GUI page not found for 3rd party vendor profile");

    for (PagePrinters* page : { it->second.first, it->second.second }) 
        if (page) {
            if (page->install && !install)
                page->select_all(false);
            page->install = install;
            // if some 3rd vendor is selected, select first printer for them
            if (install)
                page->printer_pickers[0]->select_one(0, true);
            page->Layout();
        }

    load_pages();
}

bool ConfigWizard::priv::on_bnt_finish()
{
    /* When Filaments or Sla Materials pages are activated, 
     * materials for this pages are automaticaly updated and presets are reloaded.
     * 
     * But, if _Finish_ button was clicked without activation of those pages 
     * (for example, just some printers were added/deleted), 
     * than last changes wouldn't be updated for filaments/materials.
     * SO, do that before close of Wizard
     */
    update_materials(T_ANY);
    if (any_fff_selected)
        page_filaments->reload_presets();
    if (any_sla_selected)
        page_sla_materials->reload_presets();

	// theres no need to check that filament is selected if we have only custom printer
	if (custom_printer_selected && !any_fff_selected && !any_sla_selected) return true;
    // check, that there is selected at least one filament/material
    return check_materials_in_config(T_ANY);
}

bool ConfigWizard::priv::check_materials_in_config(Technology technology, bool show_info_msg)
{
    const auto exist_preset = [this](const std::string& section, const Materials& materials)
    {
        if (appconfig_new.has_section(section) &&
            !appconfig_new.get_section(section).empty())
        {
            const std::map<std::string, std::string>& appconfig_presets = appconfig_new.get_section(section);
            for (const auto& preset : appconfig_presets)
                if (materials.exist_preset(preset.first))
                    return true;
        }
        return false;
    };

    const auto ask_and_selected_default_materials = [this](wxString message, Technology technology)
    {
        wxMessageDialog msg(q, message, _(L("Notice")), wxYES_NO);
        if (msg.ShowModal() == wxID_YES)
            selected_default_materials(technology);
    };

    if (any_fff_selected && technology & T_FFF && !exist_preset(AppConfig::SECTION_FILAMENTS, filaments))
    {
		if (show_info_msg)
		{
			wxString message = _(L("You have to select at least one filament for selected printers")) + "\n\n\t" +
				_(L("Do you want to automatic select default filaments?"));
			ask_and_selected_default_materials(message, T_FFF);
		}
		return false;
    }

    if (any_sla_selected && technology & T_SLA && !exist_preset(AppConfig::SECTION_MATERIALS, sla_materials))
    {
        if (show_info_msg)
        {
            wxString message = _(L("You have to select at least one material for selected printers")) + "\n\n\t" +
                               _(L("Do you want to automatic select default materials?"));
            ask_and_selected_default_materials(message, T_SLA);
        }
        return false;
    }

    return true;
}

void ConfigWizard::priv::apply_config(AppConfig *app_config, PresetBundle *preset_bundle, const PresetUpdater *updater)
{
    const auto enabled_vendors = appconfig_new.vendors();

    // Install bundles from resources if needed:
    std::vector<std::string> install_bundles;
    for (const auto &pair : bundles) {
        if (! pair.second.is_in_resources) { continue; }

        if (pair.second.is_prusa_bundle) {
            // Always install Prusa bundle, because it has a lot of filaments/materials
            // likely to be referenced by other profiles.
            install_bundles.emplace_back(pair.first);
            continue;
        }

        const auto vendor = enabled_vendors.find(pair.first);
        if (vendor == enabled_vendors.end()) { continue; }

        size_t size_sum = 0;
        for (const auto &model : vendor->second) { size_sum += model.second.size(); }

        if (size_sum > 0) {
            // This vendor needs to be installed
            install_bundles.emplace_back(pair.first);
        }
    }

    // Decide whether to create snapshot based on run_reason and the reset profile checkbox
    bool snapshot = true;
    Snapshot::Reason snapshot_reason = Snapshot::SNAPSHOT_UPGRADE;
    switch (run_reason) {
        case ConfigWizard::RR_DATA_EMPTY:
            snapshot = false;
            break;
        case ConfigWizard::RR_DATA_LEGACY:
            snapshot = true;
            break;
        case ConfigWizard::RR_DATA_INCOMPAT:
            // In this case snapshot has already been taken by
            // PresetUpdater with the appropriate reason
            snapshot = false;
            break;
        case ConfigWizard::RR_USER:
            snapshot = page_welcome->reset_user_profile();
            snapshot_reason = Snapshot::SNAPSHOT_USER;
            break;
    }

    if (snapshot) {
        SnapshotDB::singleton().take_snapshot(*app_config, snapshot_reason);
    }

    if (install_bundles.size() > 0) {
        // Install bundles from resources.
        // Don't create snapshot - we've already done that above if applicable.
        updater->install_bundles_rsrc(std::move(install_bundles), false);
    } else {
        BOOST_LOG_TRIVIAL(info) << "No bundles need to be installed from resources";
    }

    if (page_welcome->reset_user_profile()) {
        BOOST_LOG_TRIVIAL(info) << "Resetting user profiles...";
        preset_bundle->reset(true);
    }

    app_config->set_vendors(appconfig_new);
    if (appconfig_new.has_section(AppConfig::SECTION_FILAMENTS)) {
        app_config->set_section(AppConfig::SECTION_FILAMENTS, appconfig_new.get_section(AppConfig::SECTION_FILAMENTS));
    }
    if (appconfig_new.has_section(AppConfig::SECTION_MATERIALS)) {
        app_config->set_section(AppConfig::SECTION_MATERIALS, appconfig_new.get_section(AppConfig::SECTION_MATERIALS));
    }
    app_config->set("version_check", page_update->version_check ? "1" : "0");
    app_config->set("preset_update", page_update->preset_update ? "1" : "0");
    app_config->set("export_sources_full_pathnames", page_reload_from_disk->full_pathnames ? "1" : "0");

    page_mode->serialize_mode(app_config);

    std::string preferred_model;

    // Figure out the default pre-selected printer based on the selections in the pickers.
    // The default is the first selected printer model (one with at least 1 variant selected).
    // The default is only applied by load_presets() if the user doesn't have a (visible) printer
    // selected already.
    // Prusa printers are considered first, then 3rd party.
    const auto config_prusa = enabled_vendors.find("PrusaResearch");
    if (config_prusa != enabled_vendors.end()) {
        for (const auto &model : bundles.prusa_bundle().vendor_profile->models) {
            const auto model_it = config_prusa->second.find(model.id);
            if (model_it != config_prusa->second.end() && model_it->second.size() > 0) {
                preferred_model = model.id;
                break;
            }
        }
    }
    if (preferred_model.empty()) {
        for (const auto &bundle : bundles) {
            if (bundle.second.is_prusa_bundle) { continue; }

            const auto config = enabled_vendors.find(bundle.first);
			if (config == enabled_vendors.end()) { continue; }
            for (const auto &model : bundle.second.vendor_profile->models) {
                const auto model_it = config->second.find(model.id);
                if (model_it != config->second.end() && model_it->second.size() > 0) {
                    preferred_model = model.id;
                    break;
                }
            }
        }
    }

    preset_bundle->load_presets(*app_config, preferred_model);

    if (page_custom->custom_wanted()) {
        page_firmware->apply_custom_config(*custom_config);
        page_bed->apply_custom_config(*custom_config);
        page_diams->apply_custom_config(*custom_config);
        page_temps->apply_custom_config(*custom_config);

        const std::string profile_name = page_custom->profile_name();
        preset_bundle->load_config(profile_name, *custom_config);
    }

    // Update the selections from the compatibilty.
    preset_bundle->export_selections(*app_config);
}

void ConfigWizard::priv::update_presets_in_config(const std::string& section, const std::string& alias_key, bool add)
{
    const PresetAliases& aliases = section == AppConfig::SECTION_FILAMENTS ? aliases_fff : aliases_sla;

    auto update = [this, add](const std::string& s, const std::string& key) {
    	assert(! s.empty());
        if (add)
            appconfig_new.set(s, key, "1");
        else
            appconfig_new.erase(s, key); 
    };

    // add or delete presets had a same alias 
    auto it = aliases.find(alias_key);
    if (it != aliases.end())
        for (const std::string& name : it->second)
            update(section, name);
}

bool ConfigWizard::priv::check_fff_selected()
{
    bool ret = page_fff->any_selected();
    for (const auto& printer: pages_3rdparty)
        if (printer.second.first)               // FFF page
            ret |= printer.second.first->any_selected();
    return ret;
}

bool ConfigWizard::priv::check_sla_selected()
{
    bool ret = page_msla->any_selected();
    for (const auto& printer: pages_3rdparty)
        if (printer.second.second)               // SLA page
            ret |= printer.second.second->any_selected();
    return ret;
}


// Public

ConfigWizard::ConfigWizard(wxWindow *parent)
    : DPIDialog(parent, wxID_ANY, wxString(SLIC3R_APP_NAME) + " - " + _(name()), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER)
    , p(new priv(this))
{
    this->SetFont(wxGetApp().normal_font());

    p->load_vendors();
    p->custom_config.reset(DynamicPrintConfig::new_from_defaults_keys({
        "gcode_flavor", "bed_shape", "bed_custom_texture", "bed_custom_model", "nozzle_diameter", "filament_diameter", "temperature", "bed_temperature",
    }));

    p->index = new ConfigWizardIndex(this);

    auto *vsizer = new wxBoxSizer(wxVERTICAL);
    auto *topsizer = new wxBoxSizer(wxHORIZONTAL);
    auto *hline = new wxStaticLine(this);
    p->btnsizer = new wxBoxSizer(wxHORIZONTAL);

    // Initially we _do not_ SetScrollRate in order to figure out the overall width of the Wizard  without scrolling.
    // Later, we compare that to the size of the current screen and set minimum width based on that (see below).
    p->hscroll = new wxScrolledWindow(this);
    p->hscroll_sizer = new wxBoxSizer(wxHORIZONTAL);
    p->hscroll->SetSizer(p->hscroll_sizer);

    topsizer->Add(p->index, 0, wxEXPAND);
    topsizer->AddSpacer(INDEX_MARGIN);
    topsizer->Add(p->hscroll, 1, wxEXPAND);

    p->btn_sel_all = new wxButton(this, wxID_ANY, _(L("Select all standard printers")));
    p->btnsizer->Add(p->btn_sel_all);

    p->btn_prev = new wxButton(this, wxID_ANY, _(L("< &Back")));
    p->btn_next = new wxButton(this, wxID_ANY, _(L("&Next >")));
    p->btn_finish = new wxButton(this, wxID_APPLY, _(L("&Finish")));
    p->btn_cancel = new wxButton(this, wxID_CANCEL, _(L("Cancel")));   // Note: The label needs to be present, otherwise we get accelerator bugs on Mac
    p->btnsizer->AddStretchSpacer();
    p->btnsizer->Add(p->btn_prev, 0, wxLEFT, BTN_SPACING);
    p->btnsizer->Add(p->btn_next, 0, wxLEFT, BTN_SPACING);
    p->btnsizer->Add(p->btn_finish, 0, wxLEFT, BTN_SPACING);
    p->btnsizer->Add(p->btn_cancel, 0, wxLEFT, BTN_SPACING);

    const auto prusa_it = p->bundles.find("PrusaResearch");
    wxCHECK_RET(prusa_it != p->bundles.cend(), "Vendor PrusaResearch not found");
    const VendorProfile *vendor_prusa = prusa_it->second.vendor_profile;

    p->add_page(p->page_welcome = new PageWelcome(this));

    p->page_fff = new PagePrinters(this, _(L("Prusa FFF Technology Printers")), "Prusa FFF", *vendor_prusa, 0, T_FFF);
    p->add_page(p->page_fff);

    p->page_msla = new PagePrinters(this, _(L("Prusa MSLA Technology Printers")), "Prusa MSLA", *vendor_prusa, 0, T_SLA);
    p->add_page(p->page_msla);

	// Pages for 3rd party vendors
	p->create_3rdparty_pages();   // Needs to be done _before_ creating PageVendors
	p->add_page(p->page_vendors = new PageVendors(this));
	p->add_page(p->page_custom = new PageCustom(this));
	p->custom_printer_selected = p->page_custom->custom_wanted();

    p->any_sla_selected = p->check_sla_selected();
    p->any_fff_selected = p->check_fff_selected();

    p->update_materials(T_ANY);

    p->add_page(p->page_filaments = new PageMaterials(this, &p->filaments,
        _(L("Filament Profiles Selection")), _(L("Filaments")), _(L("Type:")) ));
    p->add_page(p->page_sla_materials = new PageMaterials(this, &p->sla_materials,
        _(L("SLA Material Profiles Selection")) + " ", _(L("SLA Materials")), _(L("Layer height:")) ));

    
    p->add_page(p->page_update   = new PageUpdate(this));
    p->add_page(p->page_reload_from_disk = new PageReloadFromDisk(this));
    p->add_page(p->page_mode     = new PageMode(this));
    p->add_page(p->page_firmware = new PageFirmware(this));
    p->add_page(p->page_bed      = new PageBedShape(this));
    p->add_page(p->page_diams    = new PageDiameters(this));
    p->add_page(p->page_temps    = new PageTemperatures(this));

    p->load_pages();
    p->index->go_to(size_t{0});

    vsizer->Add(topsizer, 1, wxEXPAND | wxALL, DIALOG_MARGIN);
    vsizer->Add(hline, 0, wxEXPAND);
    vsizer->Add(p->btnsizer, 0, wxEXPAND | wxALL, DIALOG_MARGIN);

    SetSizer(vsizer);
    SetSizerAndFit(vsizer);

    // We can now enable scrolling on hscroll
    p->hscroll->SetScrollRate(30, 30);

    on_window_geometry(this, [this]() {
        p->init_dialog_size();
    });

    p->btn_prev->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &) { this->p->index->go_prev(); });

    p->btn_next->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &)
    {
        // check, that there is selected at least one filament/material
        ConfigWizardPage* active_page = this->p->index->active_page();
        if ( (active_page == p->page_filaments || active_page == p->page_sla_materials)
            && !p->check_materials_in_config(dynamic_cast<PageMaterials*>(active_page)->materials->technology))
            return;
        this->p->index->go_next();
    });

    p->btn_finish->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &)
    {
        if (p->on_bnt_finish())
            this->EndModal(wxID_OK);
    });

    p->btn_sel_all->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &) {
        p->any_sla_selected = true;
        p->load_pages();
        p->page_fff->select_all(true, false);
        p->page_msla->select_all(true, false);
        p->index->go_to(p->page_mode);
    });

    p->index->Bind(EVT_INDEX_PAGE, [this](const wxCommandEvent &) {
        const bool is_last = p->index->active_is_last();
        p->btn_next->Show(! is_last);
        if (is_last)
            p->btn_finish->SetFocus();

        Layout();
    });
}

ConfigWizard::~ConfigWizard() {}

bool ConfigWizard::run(RunReason reason, StartPage start_page)
{
    BOOST_LOG_TRIVIAL(info) << boost::format("Running ConfigWizard, reason: %1%, start_page: %2%") % reason % start_page;

    GUI_App &app = wxGetApp();

    p->set_run_reason(reason);
    p->set_start_page(start_page);

    if (ShowModal() == wxID_OK) {
        p->apply_config(app.app_config, app.preset_bundle, app.preset_updater);
        app.app_config->set_legacy_datadir(false);
        app.update_mode();
        BOOST_LOG_TRIVIAL(info) << "ConfigWizard applied";
        return true;
    } else {
        BOOST_LOG_TRIVIAL(info) << "ConfigWizard cancelled";
        return false;
    }
}

const wxString& ConfigWizard::name(const bool from_menu/* = false*/)
{
    // A different naming convention is used for the Wizard on Windows & GTK vs. OSX.
    // Note: Don't call _() macro here.
    //       This function just return the current name according to the OS.
    //       Translation is implemented inside GUI_App::add_config_menu()
#if __APPLE__
    static const wxString config_wizard_name =  L("Configuration Assistant");
    static const wxString config_wizard_name_menu = L("Configuration &Assistant");
#else
    static const wxString config_wizard_name = L("Configuration Wizard");
    static const wxString config_wizard_name_menu = L("Configuration &Wizard");
#endif
    return from_menu ? config_wizard_name_menu : config_wizard_name;
}

void ConfigWizard::on_dpi_changed(const wxRect &suggested_rect)
{
    p->index->msw_rescale();

    const int em = em_unit();

    msw_buttons_rescale(this, em, { wxID_APPLY, 
                                    wxID_CANCEL,
                                    p->btn_sel_all->GetId(),
                                    p->btn_next->GetId(),
                                    p->btn_prev->GetId() });

    for (auto printer_picker: p->page_fff->printer_pickers)
        msw_buttons_rescale(this, em, printer_picker->get_button_indexes());

    p->init_dialog_size();

    Refresh();
}

}
}