1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
|
#include "Print.hpp"
#include "BoundingBox.hpp"
#include "ClipperUtils.hpp"
#include "Extruder.hpp"
#include "Flow.hpp"
#include "Geometry.hpp"
#include "SupportMaterial.hpp"
#include "GCode.hpp"
#include "GCode/WipeTowerPrusaMM.hpp"
#include <algorithm>
#include <unordered_set>
#include <boost/filesystem.hpp>
#include <boost/lexical_cast.hpp>
#include <boost/log/trivial.hpp>
namespace Slic3r {
template class PrintState<PrintStep, psCount>;
template class PrintState<PrintObjectStep, posCount>;
void Print::clear_objects()
{
for (int i = int(this->objects.size())-1; i >= 0; --i)
this->delete_object(i);
for (PrintRegion *region : this->regions)
delete region;
this->regions.clear();
}
void Print::delete_object(size_t idx)
{
// destroy object and remove it from our container
delete this->objects[idx];
this->objects.erase(this->objects.begin() + idx);
this->invalidate_all_steps();
// TODO: purge unused regions
}
void Print::reload_object(size_t /* idx */)
{
/* TODO: this method should check whether the per-object config and per-material configs
have changed in such a way that regions need to be rearranged or we can just apply
the diff and invalidate something. Same logic as apply_config()
For now we just re-add all objects since we haven't implemented this incremental logic yet.
This should also check whether object volumes (parts) have changed. */
// collect all current model objects
ModelObjectPtrs model_objects;
model_objects.reserve(this->objects.size());
for (PrintObject *object : this->objects)
model_objects.push_back(object->model_object());
// remove our print objects
this->clear_objects();
// re-add model objects
for (ModelObject *mo : model_objects)
this->add_model_object(mo);
}
// Reloads the model instances into the print class.
// The slicing shall not be running as the modified model instances at the print
// are used for the brim & skirt calculation.
// Returns true if the brim or skirt have been invalidated.
bool Print::reload_model_instances()
{
bool invalidated = false;
for (PrintObject *object : this->objects)
invalidated |= object->reload_model_instances();
return invalidated;
}
PrintRegion* Print::add_region()
{
regions.push_back(new PrintRegion(this));
return regions.back();
}
// Called by Print::apply_config().
// This method only accepts PrintConfig option keys.
bool Print::invalidate_state_by_config_options(const std::vector<t_config_option_key> &opt_keys)
{
if (opt_keys.empty())
return false;
// Cache the plenty of parameters, which influence the G-code generator only,
// or they are only notes not influencing the generated G-code.
static std::unordered_set<std::string> steps_gcode = {
"avoid_crossing_perimeters",
"bed_shape",
"bed_temperature",
"before_layer_gcode",
"between_objects_gcode",
"bridge_acceleration",
"bridge_fan_speed",
"cooling",
"default_acceleration",
"deretract_speed",
"disable_fan_first_layers",
"duplicate_distance",
"end_gcode",
"end_filament_gcode",
"extrusion_axis",
"extruder_clearance_height",
"extruder_clearance_radius",
"extruder_colour",
"extruder_offset",
"extrusion_multiplier",
"fan_always_on",
"fan_below_layer_time",
"filament_colour",
"filament_diameter",
"filament_density",
"filament_notes",
"filament_cost",
"filament_max_volumetric_speed",
"first_layer_acceleration",
"first_layer_bed_temperature",
"first_layer_speed",
"gcode_comments",
"gcode_flavor",
"infill_acceleration",
"infill_first",
"layer_gcode",
"min_fan_speed",
"max_fan_speed",
"max_print_height",
"min_print_speed",
"max_print_speed",
"max_volumetric_speed",
"max_volumetric_extrusion_rate_slope_positive",
"max_volumetric_extrusion_rate_slope_negative",
"notes",
"only_retract_when_crossing_perimeters",
"output_filename_format",
"perimeter_acceleration",
"post_process",
"printer_notes",
"retract_before_travel",
"retract_before_wipe",
"retract_layer_change",
"retract_length",
"retract_length_toolchange",
"retract_lift",
"retract_lift_above",
"retract_lift_below",
"retract_restart_extra",
"retract_restart_extra_toolchange",
"retract_speed",
"slowdown_below_layer_time",
"standby_temperature_delta",
"start_gcode",
"start_filament_gcode",
"toolchange_gcode",
"threads",
"travel_speed",
"use_firmware_retraction",
"use_relative_e_distances",
"use_volumetric_e",
"variable_layer_height",
"wipe"
};
static std::unordered_set<std::string> steps_ignore;
std::vector<PrintStep> steps;
std::vector<PrintObjectStep> osteps;
bool invalidated = false;
for (const t_config_option_key &opt_key : opt_keys) {
if (steps_gcode.find(opt_key) != steps_gcode.end()) {
// These options only affect G-code export or they are just notes without influence on the generated G-code,
// so there is nothing to invalidate.
steps.emplace_back(psGCodeExport);
} else if (steps_ignore.find(opt_key) != steps_ignore.end()) {
// These steps have no influence on the G-code whatsoever. Just ignore them.
} else if (
opt_key == "skirts"
|| opt_key == "skirt_height"
|| opt_key == "skirt_distance"
|| opt_key == "min_skirt_length"
|| opt_key == "ooze_prevention") {
steps.emplace_back(psSkirt);
} else if (opt_key == "brim_width") {
steps.emplace_back(psBrim);
steps.emplace_back(psSkirt);
} else if (
opt_key == "nozzle_diameter"
|| opt_key == "resolution") {
osteps.emplace_back(posSlice);
} else if (
opt_key == "complete_objects"
|| opt_key == "filament_type"
|| opt_key == "filament_soluble"
|| opt_key == "first_layer_temperature"
|| opt_key == "gcode_flavor"
|| opt_key == "single_extruder_multi_material"
|| opt_key == "spiral_vase"
|| opt_key == "temperature"
|| opt_key == "wipe_tower"
|| opt_key == "wipe_tower_x"
|| opt_key == "wipe_tower_y"
|| opt_key == "wipe_tower_width"
|| opt_key == "wipe_tower_per_color_wipe"
|| opt_key == "z_offset") {
steps.emplace_back(psWipeTower);
} else if (
opt_key == "first_layer_extrusion_width"
|| opt_key == "min_layer_height"
|| opt_key == "max_layer_height") {
osteps.emplace_back(posPerimeters);
osteps.emplace_back(posInfill);
osteps.emplace_back(posSupportMaterial);
steps.emplace_back(psSkirt);
steps.emplace_back(psBrim);
steps.emplace_back(psWipeTower);
} else {
// for legacy, if we can't handle this option let's invalidate all steps
//FIXME invalidate all steps of all objects as well?
invalidated |= this->invalidate_all_steps();
// Continue with the other opt_keys to possibly invalidate any object specific steps.
}
}
sort_remove_duplicates(steps);
for (PrintStep step : steps)
invalidated |= this->invalidate_step(step);
sort_remove_duplicates(osteps);
for (PrintObjectStep ostep : osteps)
for (PrintObject *object : this->objects)
invalidated |= object->invalidate_step(ostep);
return invalidated;
}
bool Print::invalidate_step(PrintStep step)
{
bool invalidated = m_state.invalidate(step);
// Propagate to dependent steps.
//FIXME Why should skirt invalidate brim? Shouldn't it be vice versa?
if (step == psSkirt)
invalidated |= m_state.invalidate(psBrim);
return invalidated;
}
// returns true if an object step is done on all objects
// and there's at least one object
bool Print::is_step_done(PrintObjectStep step) const
{
if (this->objects.empty())
return false;
for (const PrintObject *object : this->objects)
if (!object->m_state.is_done(step))
return false;
return true;
}
// returns 0-based indices of used extruders
std::vector<unsigned int> Print::object_extruders() const
{
std::vector<unsigned int> extruders;
for (PrintRegion* region : this->regions) {
// these checks reflect the same logic used in the GUI for enabling/disabling
// extruder selection fields
if (region->config.perimeters.value > 0 || this->config.brim_width.value > 0)
extruders.push_back(region->config.perimeter_extruder - 1);
if (region->config.fill_density.value > 0)
extruders.push_back(region->config.infill_extruder - 1);
if (region->config.top_solid_layers.value > 0 || region->config.bottom_solid_layers.value > 0)
extruders.push_back(region->config.solid_infill_extruder - 1);
}
sort_remove_duplicates(extruders);
return extruders;
}
// returns 0-based indices of used extruders
std::vector<unsigned int> Print::support_material_extruders() const
{
std::vector<unsigned int> extruders;
bool support_uses_current_extruder = false;
for (PrintObject *object : this->objects) {
if (object->has_support_material()) {
if (object->config.support_material_extruder == 0)
support_uses_current_extruder = true;
else
extruders.push_back(object->config.support_material_extruder - 1);
if (object->config.support_material_interface_extruder == 0)
support_uses_current_extruder = true;
else
extruders.push_back(object->config.support_material_interface_extruder - 1);
}
}
if (support_uses_current_extruder)
// Add all object extruders to the support extruders as it is not know which one will be used to print supports.
append(extruders, this->object_extruders());
sort_remove_duplicates(extruders);
return extruders;
}
// returns 0-based indices of used extruders
std::vector<unsigned int> Print::extruders() const
{
std::vector<unsigned int> extruders = this->object_extruders();
append(extruders, this->support_material_extruders());
sort_remove_duplicates(extruders);
return extruders;
}
void Print::_simplify_slices(double distance)
{
for (PrintObject *object : this->objects) {
for (Layer *layer : object->layers) {
layer->slices.simplify(distance);
for (LayerRegion *layerm : layer->regions)
layerm->slices.simplify(distance);
}
}
}
double Print::max_allowed_layer_height() const
{
double nozzle_diameter_max = 0.;
for (unsigned int extruder_id : this->extruders())
nozzle_diameter_max = std::max(nozzle_diameter_max, this->config.nozzle_diameter.get_at(extruder_id));
return nozzle_diameter_max;
}
// Caller is responsible for supplying models whose objects don't collide
// and have explicit instance positions.
void Print::add_model_object(ModelObject* model_object, int idx)
{
// Initialize a new print object and store it at the given position.
PrintObject *object = new PrintObject(this, model_object, model_object->raw_bounding_box());
if (idx != -1) {
delete this->objects[idx];
this->objects[idx] = object;
} else
this->objects.emplace_back(object);
// Invalidate all print steps.
this->invalidate_all_steps();
for (size_t volume_id = 0; volume_id < model_object->volumes.size(); ++ volume_id) {
// Get the config applied to this volume.
PrintRegionConfig config = this->_region_config_from_model_volume(*model_object->volumes[volume_id]);
// Find an existing print region with the same config.
size_t region_id = size_t(-1);
for (size_t i = 0; i < this->regions.size(); ++ i)
if (config.equals(this->regions[i]->config)) {
region_id = i;
break;
}
// If no region exists with the same config, create a new one.
if (region_id == size_t(-1)) {
region_id = this->regions.size();
this->add_region()->config.apply(config);
}
// Assign volume to a region.
object->add_region_volume(region_id, volume_id);
}
// Apply config to print object.
object->config.apply(this->default_object_config);
normalize_and_apply_config(object->config, model_object->config);
// update placeholders
{
// get the first input file name
std::string input_file;
std::vector<std::string> v_scale;
for (const PrintObject *object : this->objects) {
const ModelObject &mobj = *object->model_object();
v_scale.push_back(boost::lexical_cast<std::string>(mobj.instances[0]->scaling_factor*100) + "%");
if (input_file.empty())
input_file = mobj.input_file;
}
PlaceholderParser &pp = this->placeholder_parser;
pp.set("scale", v_scale);
if (! input_file.empty()) {
// get basename with and without suffix
const std::string input_basename = boost::filesystem::path(input_file).filename().string();
pp.set("input_filename", input_basename);
const std::string input_basename_base = input_basename.substr(0, input_basename.find_last_of("."));
pp.set("input_filename_base", input_basename_base);
}
}
}
bool Print::apply_config(DynamicPrintConfig config)
{
// we get a copy of the config object so we can modify it safely
config.normalize();
// apply variables to placeholder parser
this->placeholder_parser.apply_config(config);
// handle changes to print config
t_config_option_keys print_diff = this->config.diff(config);
this->config.apply_only(config, print_diff, true);
bool invalidated = this->invalidate_state_by_config_options(print_diff);
// handle changes to object config defaults
this->default_object_config.apply(config, true);
for (PrintObject *object : this->objects) {
// we don't assume that config contains a full ObjectConfig,
// so we base it on the current print-wise default
PrintObjectConfig new_config = this->default_object_config;
// we override the new config with object-specific options
normalize_and_apply_config(new_config, object->model_object()->config);
// Force a refresh of a variable layer height profile at the PrintObject if it is not valid.
if (! object->layer_height_profile_valid) {
// The layer_height_profile is not valid for some reason (updated by the user or invalidated due to some option change).
// Invalidate the slicing step, which in turn invalidates everything.
object->invalidate_step(posSlice);
// Trigger recalculation.
invalidated = true;
}
// check whether the new config is different from the current one
t_config_option_keys diff = object->config.diff(new_config);
object->config.apply_only(new_config, diff, true);
invalidated |= object->invalidate_state_by_config_options(diff);
}
// handle changes to regions config defaults
this->default_region_config.apply(config, true);
// All regions now have distinct settings.
// Check whether applying the new region config defaults we'd get different regions.
bool rearrange_regions = false;
{
// Collect the already visited region configs into other_region_configs,
// so one may check for duplicates.
std::vector<PrintRegionConfig> other_region_configs;
for (size_t region_id = 0; region_id < this->regions.size(); ++ region_id) {
PrintRegion ®ion = *this->regions[region_id];
PrintRegionConfig this_region_config;
bool this_region_config_set = false;
for (PrintObject *object : this->objects) {
if (region_id < object->region_volumes.size()) {
for (int volume_id : object->region_volumes[region_id]) {
const ModelVolume &volume = *object->model_object()->volumes[volume_id];
if (this_region_config_set) {
// If the new config for this volume differs from the other
// volume configs currently associated to this region, it means
// the region subdivision does not make sense anymore.
if (! this_region_config.equals(this->_region_config_from_model_volume(volume))) {
rearrange_regions = true;
goto exit_for_rearrange_regions;
}
} else {
this_region_config = this->_region_config_from_model_volume(volume);
this_region_config_set = true;
}
for (const PrintRegionConfig &cfg : other_region_configs) {
// If the new config for this volume equals any of the other
// volume configs that are not currently associated to this
// region, it means the region subdivision does not make
// sense anymore.
if (cfg.equals(this_region_config)) {
rearrange_regions = true;
goto exit_for_rearrange_regions;
}
}
}
}
}
if (this_region_config_set) {
t_config_option_keys diff = region.config.diff(this_region_config);
if (! diff.empty()) {
region.config.apply_only(this_region_config, diff);
for (PrintObject *object : this->objects)
if (region_id < object->region_volumes.size() && ! object->region_volumes[region_id].empty())
invalidated |= object->invalidate_state_by_config_options(diff);
}
other_region_configs.emplace_back(std::move(this_region_config));
}
}
}
exit_for_rearrange_regions:
if (rearrange_regions) {
// The current subdivision of regions does not make sense anymore.
// We need to remove all objects and re-add them.
ModelObjectPtrs model_objects;
model_objects.reserve(this->objects.size());
for (PrintObject *object : this->objects)
model_objects.push_back(object->model_object());
this->clear_objects();
for (ModelObject *mo : model_objects)
this->add_model_object(mo);
invalidated = true;
}
// Always make sure that the layer_height_profiles are set, as they should not be modified from the worker threads.
for (PrintObject *object : this->objects)
if (! object->layer_height_profile_valid)
object->update_layer_height_profile();
return invalidated;
}
bool Print::has_infinite_skirt() const
{
return (this->config.skirt_height == -1 && this->config.skirts > 0)
|| (this->config.ooze_prevention && this->extruders().size() > 1);
}
bool Print::has_skirt() const
{
return (this->config.skirt_height > 0 && this->config.skirts > 0)
|| this->has_infinite_skirt();
}
std::string Print::validate() const
{
BoundingBox bed_box_2D = get_extents(Polygon::new_scale(config.bed_shape.values));
BoundingBoxf3 print_volume(Pointf3(unscale(bed_box_2D.min.x), unscale(bed_box_2D.min.y), 0.0), Pointf3(unscale(bed_box_2D.max.x), unscale(bed_box_2D.max.y), config.max_print_height));
// Allow the objects to protrude below the print bed, only the part of the object above the print bed will be sliced.
print_volume.min.z = -1e10;
for (PrintObject *po : this->objects) {
if (! print_volume.contains(po->model_object()->tight_bounding_box(false)))
return "Some objects are outside of the print volume.";
}
if (this->config.complete_objects) {
// Check horizontal clearance.
{
Polygons convex_hulls_other;
for (PrintObject *object : this->objects) {
// Get convex hull of all meshes assigned to this print object.
Polygon convex_hull;
{
Polygons mesh_convex_hulls;
for (const std::vector<int> &volumes : object->region_volumes)
for (int volume_id : volumes)
mesh_convex_hulls.emplace_back(object->model_object()->volumes[volume_id]->mesh.convex_hull());
// make a single convex hull for all of them
convex_hull = Slic3r::Geometry::convex_hull(mesh_convex_hulls);
}
// Apply the same transformations we apply to the actual meshes when slicing them.
object->model_object()->instances.front()->transform_polygon(&convex_hull);
// Grow convex hull with the clearance margin.
convex_hull = offset(convex_hull, scale_(this->config.extruder_clearance_radius.value)/2, jtRound, scale_(0.1)).front();
// Now we check that no instance of convex_hull intersects any of the previously checked object instances.
for (const Point © : object->_shifted_copies) {
Polygon p = convex_hull;
p.translate(copy);
if (! intersection(convex_hulls_other, p).empty())
return "Some objects are too close; your extruder will collide with them.";
polygons_append(convex_hulls_other, p);
}
}
}
// Check vertical clearance.
{
std::vector<coord_t> object_height;
for (const PrintObject *object : this->objects)
object_height.insert(object_height.end(), object->copies().size(), object->size.z);
std::sort(object_height.begin(), object_height.end());
// Ignore the tallest *copy* (this is why we repeat height for all of them):
// it will be printed as last one so its height doesn't matter.
object_height.pop_back();
if (! object_height.empty() && object_height.back() > scale_(this->config.extruder_clearance_height.value))
return "Some objects are too tall and cannot be printed without extruder collisions.";
}
} // end if (this->config.complete_objects)
if (this->config.spiral_vase) {
size_t total_copies_count = 0;
for (const PrintObject *object : this->objects)
total_copies_count += object->copies().size();
// #4043
if (total_copies_count > 1 && ! this->config.complete_objects.value)
return "The Spiral Vase option can only be used when printing a single object.";
if (this->regions.size() > 1)
return "The Spiral Vase option can only be used when printing single material objects.";
}
if (this->has_wipe_tower() && ! this->objects.empty()) {
#if 0
for (auto dmr : this->config.nozzle_diameter.values)
if (std::abs(dmr - 0.4) > EPSILON)
return "The Wipe Tower is currently only supported for the 0.4mm nozzle diameter.";
#endif
if (this->config.gcode_flavor != gcfRepRap && this->config.gcode_flavor != gcfMarlin)
return "The Wipe Tower is currently only supported for the Marlin and RepRap/Sprinter G-code flavors.";
if (! this->config.use_relative_e_distances)
return "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1).";
SlicingParameters slicing_params0 = this->objects.front()->slicing_parameters();
for (PrintObject *object : this->objects) {
SlicingParameters slicing_params = object->slicing_parameters();
if (std::abs(slicing_params.first_print_layer_height - slicing_params0.first_print_layer_height) > EPSILON ||
std::abs(slicing_params.layer_height - slicing_params0.layer_height ) > EPSILON)
return "The Wipe Tower is only supported for multiple objects if they have equal layer heigths";
if (slicing_params.raft_layers() != slicing_params0.raft_layers())
return "The Wipe Tower is only supported for multiple objects if they are printed over an equal number of raft layers";
if (object->config.support_material_contact_distance != this->objects.front()->config.support_material_contact_distance)
return "The Wipe Tower is only supported for multiple objects if they are printed with the same support_material_contact_distance";
if (! equal_layering(slicing_params, slicing_params0))
return "The Wipe Tower is only supported for multiple objects if they are sliced equally.";
bool was_layer_height_profile_valid = object->layer_height_profile_valid;
object->update_layer_height_profile();
object->layer_height_profile_valid = was_layer_height_profile_valid;
for (size_t i = 5; i < object->layer_height_profile.size(); i += 2)
if (object->layer_height_profile[i-1] > slicing_params.object_print_z_min + EPSILON &&
std::abs(object->layer_height_profile[i] - object->config.layer_height) > EPSILON)
return "The Wipe Tower is currently only supported with constant Z layer spacing. Layer editing is not allowed.";
}
}
{
// find the smallest nozzle diameter
std::vector<unsigned int> extruders = this->extruders();
if (extruders.empty())
return "The supplied settings will cause an empty print.";
std::vector<double> nozzle_diameters;
for (unsigned int extruder_id : extruders)
nozzle_diameters.push_back(this->config.nozzle_diameter.get_at(extruder_id));
double min_nozzle_diameter = *std::min_element(nozzle_diameters.begin(), nozzle_diameters.end());
for (PrintObject *object : this->objects) {
if ((object->config.support_material_extruder == -1 || object->config.support_material_interface_extruder == -1) &&
(object->config.raft_layers > 0 || object->config.support_material.value)) {
// The object has some form of support and either support_material_extruder or support_material_interface_extruder
// will be printed with the current tool without a forced tool change. Play safe, assert that all object nozzles
// are of the same diameter.
if (nozzle_diameters.size() > 1)
return "Printing with multiple extruders of differing nozzle diameters. "
"If support is to be printed with the current extruder (support_material_extruder == 0 or support_material_interface_extruder == 0), "
"all nozzles have to be of the same diameter.";
}
// validate first_layer_height
double first_layer_height = object->config.get_abs_value("first_layer_height");
double first_layer_min_nozzle_diameter;
if (object->config.raft_layers > 0) {
// if we have raft layers, only support material extruder is used on first layer
size_t first_layer_extruder = object->config.raft_layers == 1
? object->config.support_material_interface_extruder-1
: object->config.support_material_extruder-1;
first_layer_min_nozzle_diameter = (first_layer_extruder == size_t(-1)) ?
min_nozzle_diameter :
this->config.nozzle_diameter.get_at(first_layer_extruder);
} else {
// if we don't have raft layers, any nozzle diameter is potentially used in first layer
first_layer_min_nozzle_diameter = min_nozzle_diameter;
}
if (first_layer_height > first_layer_min_nozzle_diameter)
return "First layer height can't be greater than nozzle diameter";
// validate layer_height
if (object->config.layer_height.value > min_nozzle_diameter)
return "Layer height can't be greater than nozzle diameter";
}
}
return std::string();
}
// the bounding box of objects placed in copies position
// (without taking skirt/brim/support material into account)
BoundingBox Print::bounding_box() const
{
BoundingBox bb;
for (const PrintObject *object : this->objects)
for (Point copy : object->_shifted_copies) {
bb.merge(copy);
copy.translate(object->size);
bb.merge(copy);
}
return bb;
}
// the total bounding box of extrusions, including skirt/brim/support material
// this methods needs to be called even when no steps were processed, so it should
// only use configuration values
BoundingBox Print::total_bounding_box() const
{
// get objects bounding box
BoundingBox bb = this->bounding_box();
// we need to offset the objects bounding box by at least half the perimeters extrusion width
Flow perimeter_flow = this->objects.front()->get_layer(0)->get_region(0)->flow(frPerimeter);
double extra = perimeter_flow.width/2;
// consider support material
if (this->has_support_material()) {
extra = std::max(extra, SUPPORT_MATERIAL_MARGIN);
}
// consider brim and skirt
if (this->config.brim_width.value > 0) {
Flow brim_flow = this->brim_flow();
extra = std::max(extra, this->config.brim_width.value + brim_flow.width/2);
}
if (this->has_skirt()) {
int skirts = this->config.skirts.value;
if (skirts == 0 && this->has_infinite_skirt()) skirts = 1;
Flow skirt_flow = this->skirt_flow();
extra = std::max(
extra,
this->config.brim_width.value
+ this->config.skirt_distance.value
+ skirts * skirt_flow.spacing()
+ skirt_flow.width/2
);
}
if (extra > 0)
bb.offset(scale_(extra));
return bb;
}
double Print::skirt_first_layer_height() const
{
if (this->objects.empty()) CONFESS("skirt_first_layer_height() can't be called without PrintObjects");
return this->objects.front()->config.get_abs_value("first_layer_height");
}
Flow Print::brim_flow() const
{
ConfigOptionFloatOrPercent width = this->config.first_layer_extrusion_width;
if (width.value == 0)
width = this->regions.front()->config.perimeter_extrusion_width;
if (width.value == 0)
width = this->objects.front()->config.extrusion_width;
/* We currently use a random region's perimeter extruder.
While this works for most cases, we should probably consider all of the perimeter
extruders and take the one with, say, the smallest index.
The same logic should be applied to the code that selects the extruder during G-code
generation as well. */
return Flow::new_from_config_width(
frPerimeter,
width,
this->config.nozzle_diameter.get_at(this->regions.front()->config.perimeter_extruder-1),
this->skirt_first_layer_height(),
0
);
}
Flow Print::skirt_flow() const
{
ConfigOptionFloatOrPercent width = this->config.first_layer_extrusion_width;
if (width.value == 0)
width = this->regions.front()->config.perimeter_extrusion_width;
if (width.value == 0)
width = this->objects.front()->config.extrusion_width;
/* We currently use a random object's support material extruder.
While this works for most cases, we should probably consider all of the support material
extruders and take the one with, say, the smallest index;
The same logic should be applied to the code that selects the extruder during G-code
generation as well. */
return Flow::new_from_config_width(
frPerimeter,
width,
this->config.nozzle_diameter.get_at(this->objects.front()->config.support_material_extruder-1),
this->skirt_first_layer_height(),
0
);
}
PrintRegionConfig Print::_region_config_from_model_volume(const ModelVolume &volume)
{
PrintRegionConfig config = this->default_region_config;
normalize_and_apply_config(config, volume.get_object()->config);
normalize_and_apply_config(config, volume.config);
if (! volume.material_id().empty())
normalize_and_apply_config(config, volume.material()->config);
return config;
}
bool Print::has_support_material() const
{
for (const PrintObject *object : this->objects)
if (object->has_support_material())
return true;
return false;
}
/* This method assigns extruders to the volumes having a material
but not having extruders set in the volume config. */
void Print::auto_assign_extruders(ModelObject* model_object) const
{
// only assign extruders if object has more than one volume
if (model_object->volumes.size() < 2)
return;
// size_t extruders = this->config.nozzle_diameter.values.size();
for (size_t volume_id = 0; volume_id < model_object->volumes.size(); ++ volume_id) {
ModelVolume *volume = model_object->volumes[volume_id];
//FIXME Vojtech: This assigns an extruder ID even to a modifier volume, if it has a material assigned.
if (! volume->material_id().empty() && ! volume->config.has("extruder"))
volume->config.opt<ConfigOptionInt>("extruder", true)->value = int(volume_id + 1);
}
}
// Slicing process, running at a background thread.
void Print::process()
{
BOOST_LOG_TRIVIAL(info) << "Staring the slicing process.";
for (PrintObject *obj : this->objects)
obj->make_perimeters();
this->throw_if_canceled();
this->set_status(70, "Infilling layers");
for (PrintObject *obj : this->objects)
obj->infill();
this->throw_if_canceled();
for (PrintObject *obj : this->objects)
obj->generate_support_material();
this->throw_if_canceled();
if (! m_state.is_done(psSkirt)) {
this->set_started(psSkirt);
this->skirt.clear();
if (this->has_skirt()) {
this->set_status(88, "Generating skirt");
this->_make_skirt();
}
m_state.set_done(psSkirt);
}
this->throw_if_canceled();
if (! m_state.is_done(psBrim)) {
this->set_started(psBrim);
this->brim.clear();
if (this->config.brim_width > 0) {
this->set_status(88, "Generating brim");
this->_make_brim();
}
m_state.set_done(psBrim);
}
this->throw_if_canceled();
if (! m_state.is_done(psWipeTower)) {
this->set_started(psWipeTower);
this->_clear_wipe_tower();
if (this->has_wipe_tower()) {
//this->set_status(95, "Generating wipe tower");
this->_make_wipe_tower();
}
m_state.set_done(psWipeTower);
}
BOOST_LOG_TRIVIAL(info) << "Slicing process finished.";
}
// G-code export process, running at a background thread.
// The export_gcode may die for various reasons (fails to process output_filename_format,
// write error into the G-code, cannot execute post-processing scripts).
// It is up to the caller to show an error message.
void Print::export_gcode(const std::string &path_template, GCodePreviewData *preview_data)
{
// prerequisites
this->process();
// output everything to a G-code file
// The following call may die if the output_filename_format template substitution fails.
std::string path = this->output_filepath(path_template);
std::string message = "Exporting G-code";
if (! path.empty()) {
message += " to ";
message += path;
}
this->set_status(90, message);
// The following line may die for multiple reasons.
GCode gcode;
gcode.do_export(this, path.c_str(), preview_data);
}
void Print::_make_skirt()
{
// First off we need to decide how tall the skirt must be.
// The skirt_height option from config is expressed in layers, but our
// object might have different layer heights, so we need to find the print_z
// of the highest layer involved.
// Note that unless has_infinite_skirt() == true
// the actual skirt might not reach this $skirt_height_z value since the print
// order of objects on each layer is not guaranteed and will not generally
// include the thickest object first. It is just guaranteed that a skirt is
// prepended to the first 'n' layers (with 'n' = skirt_height).
// $skirt_height_z in this case is the highest possible skirt height for safety.
coordf_t skirt_height_z = 0.;
for (const PrintObject *object : this->objects) {
size_t skirt_layers = this->has_infinite_skirt() ?
object->layer_count() :
std::min(size_t(this->config.skirt_height.value), object->layer_count());
skirt_height_z = std::max(skirt_height_z, object->layers[skirt_layers-1]->print_z);
}
// Collect points from all layers contained in skirt height.
Points points;
for (const PrintObject *object : this->objects) {
this->throw_if_canceled();
Points object_points;
// Get object layers up to skirt_height_z.
for (const Layer *layer : object->layers) {
if (layer->print_z > skirt_height_z)
break;
for (const ExPolygon &expoly : layer->slices.expolygons)
// Collect the outer contour points only, ignore holes for the calculation of the convex hull.
append(object_points, expoly.contour.points);
}
// Get support layers up to skirt_height_z.
for (const SupportLayer *layer : object->support_layers) {
if (layer->print_z > skirt_height_z)
break;
for (const ExtrusionEntity *extrusion_entity : layer->support_fills.entities)
append(object_points, extrusion_entity->as_polyline().points);
}
// Repeat points for each object copy.
for (const Point &shift : object->_shifted_copies) {
Points copy_points = object_points;
for (Point &pt : copy_points)
pt.translate(shift);
append(points, copy_points);
}
}
if (points.size() < 3)
// At least three points required for a convex hull.
return;
this->throw_if_canceled();
Polygon convex_hull = Slic3r::Geometry::convex_hull(points);
// Skirt may be printed on several layers, having distinct layer heights,
// but loops must be aligned so can't vary width/spacing
// TODO: use each extruder's own flow
double first_layer_height = this->skirt_first_layer_height();
Flow flow = this->skirt_flow();
float spacing = flow.spacing();
double mm3_per_mm = flow.mm3_per_mm();
std::vector<size_t> extruders;
std::vector<double> extruders_e_per_mm;
{
auto set_extruders = this->extruders();
extruders.reserve(set_extruders.size());
extruders_e_per_mm.reserve(set_extruders.size());
for (auto &extruder_id : set_extruders) {
extruders.push_back(extruder_id);
extruders_e_per_mm.push_back(Extruder((unsigned int)extruder_id, &this->config).e_per_mm(mm3_per_mm));
}
}
// Number of skirt loops per skirt layer.
int n_skirts = this->config.skirts.value;
if (this->has_infinite_skirt() && n_skirts == 0)
n_skirts = 1;
// Initial offset of the brim inner edge from the object (possible with a support & raft).
// The skirt will touch the brim if the brim is extruded.
coord_t distance = scale_(std::max(this->config.skirt_distance.value, this->config.brim_width.value));
// Draw outlines from outside to inside.
// Loop while we have less skirts than required or any extruder hasn't reached the min length if any.
std::vector<coordf_t> extruded_length(extruders.size(), 0.);
for (int i = n_skirts, extruder_idx = 0; i > 0; -- i) {
this->throw_if_canceled();
// Offset the skirt outside.
distance += coord_t(scale_(spacing));
// Generate the skirt centerline.
Polygon loop;
{
Polygons loops = offset(convex_hull, distance, ClipperLib::jtRound, scale_(0.1));
Geometry::simplify_polygons(loops, scale_(0.05), &loops);
loop = loops.front();
}
// Extrude the skirt loop.
ExtrusionLoop eloop(elrSkirt);
eloop.paths.emplace_back(ExtrusionPath(
ExtrusionPath(
erSkirt,
mm3_per_mm, // this will be overridden at G-code export time
flow.width,
first_layer_height // this will be overridden at G-code export time
)));
eloop.paths.back().polyline = loop.split_at_first_point();
this->skirt.append(eloop);
if (this->config.min_skirt_length.value > 0) {
// The skirt length is limited. Sum the total amount of filament length extruded, in mm.
extruded_length[extruder_idx] += unscale(loop.length()) * extruders_e_per_mm[extruder_idx];
if (extruded_length[extruder_idx] < this->config.min_skirt_length.value) {
// Not extruded enough yet with the current extruder. Add another loop.
if (i == 1)
++ i;
} else {
assert(extruded_length[extruder_idx] >= this->config.min_skirt_length.value);
// Enough extruded with the current extruder. Extrude with the next one,
// until the prescribed number of skirt loops is extruded.
if (extruder_idx + 1 < extruders.size())
++ extruder_idx;
}
} else {
// The skirt lenght is not limited, extrude the skirt with the 1st extruder only.
}
}
// Brims were generated inside out, reverse to print the outmost contour first.
this->skirt.reverse();
}
void Print::_make_brim()
{
// Brim is only printed on first layer and uses perimeter extruder.
Flow flow = this->brim_flow();
Polygons islands;
for (PrintObject *object : this->objects) {
this->throw_if_canceled();
Polygons object_islands;
for (ExPolygon &expoly : object->layers.front()->slices.expolygons)
object_islands.push_back(expoly.contour);
if (! object->support_layers.empty())
object->support_layers.front()->support_fills.polygons_covered_by_spacing(object_islands, float(SCALED_EPSILON));
islands.reserve(islands.size() + object_islands.size() * object->_shifted_copies.size());
for (const Point &pt : object->_shifted_copies)
for (Polygon &poly : object_islands) {
islands.push_back(poly);
islands.back().translate(pt);
}
}
Polygons loops;
size_t num_loops = size_t(floor(this->config.brim_width.value / flow.width));
for (size_t i = 0; i < num_loops; ++ i) {
this->throw_if_canceled();
islands = offset(islands, float(flow.scaled_spacing()), jtSquare);
for (Polygon &poly : islands) {
// poly.simplify(SCALED_RESOLUTION);
poly.points.push_back(poly.points.front());
Points p = MultiPoint::_douglas_peucker(poly.points, SCALED_RESOLUTION);
p.pop_back();
poly.points = std::move(p);
}
polygons_append(loops, offset(islands, -0.5f * float(flow.scaled_spacing())));
}
loops = union_pt_chained(loops, false);
std::reverse(loops.begin(), loops.end());
extrusion_entities_append_loops(this->brim.entities, std::move(loops), erSkirt, float(flow.mm3_per_mm()), float(flow.width), float(this->skirt_first_layer_height()));
}
// Wipe tower support.
bool Print::has_wipe_tower() const
{
return
this->config.single_extruder_multi_material.value &&
! this->config.spiral_vase.value &&
this->config.wipe_tower.value &&
this->config.nozzle_diameter.values.size() > 1;
}
void Print::_clear_wipe_tower()
{
m_tool_ordering.clear();
m_wipe_tower_priming.reset(nullptr);
m_wipe_tower_tool_changes.clear();
m_wipe_tower_final_purge.reset(nullptr);
}
void Print::_make_wipe_tower()
{
// Let the ToolOrdering class know there will be initial priming extrusions at the start of the print.
m_tool_ordering = ToolOrdering(*this, (unsigned int)-1, true);
if (! m_tool_ordering.has_wipe_tower())
// Don't generate any wipe tower.
return;
// Check whether there are any layers in m_tool_ordering, which are marked with has_wipe_tower,
// they print neither object, nor support. These layers are above the raft and below the object, and they
// shall be added to the support layers to be printed.
// see https://github.com/prusa3d/Slic3r/issues/607
{
size_t idx_begin = size_t(-1);
size_t idx_end = m_tool_ordering.layer_tools().size();
// Find the first wipe tower layer, which does not have a counterpart in an object or a support layer.
for (size_t i = 0; i < idx_end; ++ i) {
const ToolOrdering::LayerTools < = m_tool_ordering.layer_tools()[i];
if (lt.has_wipe_tower && ! lt.has_object && ! lt.has_support) {
idx_begin = i;
break;
}
}
if (idx_begin != size_t(-1)) {
// Find the position in this->objects.first()->support_layers to insert these new support layers.
double wipe_tower_new_layer_print_z_first = m_tool_ordering.layer_tools()[idx_begin].print_z;
SupportLayerPtrs::iterator it_layer = this->objects.front()->support_layers.begin();
SupportLayerPtrs::iterator it_end = this->objects.front()->support_layers.end();
for (; it_layer != it_end && (*it_layer)->print_z - EPSILON < wipe_tower_new_layer_print_z_first; ++ it_layer);
// Find the stopper of the sequence of wipe tower layers, which do not have a counterpart in an object or a support layer.
for (size_t i = idx_begin; i < idx_end; ++ i) {
ToolOrdering::LayerTools < = const_cast<ToolOrdering::LayerTools&>(m_tool_ordering.layer_tools()[i]);
if (! (lt.has_wipe_tower && ! lt.has_object && ! lt.has_support))
break;
lt.has_support = true;
// Insert the new support layer.
double height = lt.print_z - m_tool_ordering.layer_tools()[i-1].print_z;
//FIXME the support layer ID is set to -1, as Vojtech hopes it is not being used anyway.
auto *new_layer = new SupportLayer(size_t(-1), this->objects.front(),
height, lt.print_z, lt.print_z - 0.5 * height);
it_layer = this->objects.front()->support_layers.insert(it_layer, new_layer);
++ it_layer;
}
}
}
this->throw_if_canceled();
// Initialize the wipe tower.
WipeTowerPrusaMM wipe_tower(
float(this->config.wipe_tower_x.value), float(this->config.wipe_tower_y.value),
float(this->config.wipe_tower_width.value), float(this->config.wipe_tower_per_color_wipe.value),
m_tool_ordering.first_extruder());
//wipe_tower.set_retract();
//wipe_tower.set_zhop();
// Set the extruder & material properties at the wipe tower object.
for (size_t i = 0; i < 4; ++ i)
wipe_tower.set_extruder(
i,
WipeTowerPrusaMM::parse_material(this->config.filament_type.get_at(i).c_str()),
this->config.temperature.get_at(i),
this->config.first_layer_temperature.get_at(i));
// When printing the first layer's wipe tower, the first extruder is expected to be active and primed.
// Therefore the number of wipe sections at the wipe tower will be (m_tool_ordering.front().extruders-1) at the 1st layer.
// The following variable is true if the last priming section cannot be squeezed inside the wipe tower.
bool last_priming_wipe_full = m_tool_ordering.front().extruders.size() > m_tool_ordering.front().wipe_tower_partitions;
m_wipe_tower_priming = Slic3r::make_unique<WipeTower::ToolChangeResult>(
wipe_tower.prime(this->skirt_first_layer_height(), m_tool_ordering.all_extruders(), ! last_priming_wipe_full, WipeTower::PURPOSE_EXTRUDE));
// Generate the wipe tower layers.
m_wipe_tower_tool_changes.reserve(m_tool_ordering.layer_tools().size());
// Set current_extruder_id to the last extruder primed.
unsigned int current_extruder_id = m_tool_ordering.all_extruders().back();
for (const ToolOrdering::LayerTools &layer_tools : m_tool_ordering.layer_tools()) {
this->throw_if_canceled();
if (! layer_tools.has_wipe_tower)
// This is a support only layer, or the wipe tower does not reach to this height.
continue;
bool first_layer = &layer_tools == &m_tool_ordering.front();
bool last_layer = &layer_tools == &m_tool_ordering.back() || (&layer_tools + 1)->wipe_tower_partitions == 0;
wipe_tower.set_layer(
float(layer_tools.print_z),
float(layer_tools.wipe_tower_layer_height),
layer_tools.wipe_tower_partitions,
first_layer,
last_layer);
std::vector<WipeTower::ToolChangeResult> tool_changes;
for (unsigned int extruder_id : layer_tools.extruders)
// Call the wipe_tower.tool_change() at the first layer for the initial extruder
// to extrude the wipe tower brim,
if ((first_layer && extruder_id == m_tool_ordering.all_extruders().back()) ||
// or when an extruder shall be switched.
extruder_id != current_extruder_id) {
tool_changes.emplace_back(wipe_tower.tool_change(extruder_id, extruder_id == layer_tools.extruders.back(), WipeTower::PURPOSE_EXTRUDE));
current_extruder_id = extruder_id;
}
if (! wipe_tower.layer_finished()) {
tool_changes.emplace_back(wipe_tower.finish_layer(WipeTower::PURPOSE_EXTRUDE));
if (tool_changes.size() > 1) {
// Merge the two last tool changes into one.
WipeTower::ToolChangeResult &tc1 = tool_changes[tool_changes.size() - 2];
WipeTower::ToolChangeResult &tc2 = tool_changes.back();
if (tc1.end_pos != tc2.start_pos) {
// Add a travel move from tc1.end_pos to tc2.start_pos.
char buf[2048];
sprintf(buf, "G1 X%.3f Y%.3f F7200\n", tc2.start_pos.x, tc2.start_pos.y);
tc1.gcode += buf;
}
tc1.gcode += tc2.gcode;
append(tc1.extrusions, tc2.extrusions);
tc1.end_pos = tc2.end_pos;
tool_changes.pop_back();
}
}
m_wipe_tower_tool_changes.emplace_back(std::move(tool_changes));
if (last_layer)
break;
}
// Unload the current filament over the purge tower.
coordf_t layer_height = this->objects.front()->config.layer_height.value;
if (m_tool_ordering.back().wipe_tower_partitions > 0) {
// The wipe tower goes up to the last layer of the print.
if (wipe_tower.layer_finished()) {
// The wipe tower is printed to the top of the print and it has no space left for the final extruder purge.
// Lift Z to the next layer.
wipe_tower.set_layer(float(m_tool_ordering.back().print_z + layer_height), float(layer_height), 0, false, true);
} else {
// There is yet enough space at this layer of the wipe tower for the final purge.
}
} else {
// The wipe tower does not reach the last print layer, perform the pruge at the last print layer.
assert(m_tool_ordering.back().wipe_tower_partitions == 0);
wipe_tower.set_layer(float(m_tool_ordering.back().print_z), float(layer_height), 0, false, true);
}
m_wipe_tower_final_purge = Slic3r::make_unique<WipeTower::ToolChangeResult>(
wipe_tower.tool_change((unsigned int)-1, false, WipeTower::PURPOSE_EXTRUDE));
}
std::string Print::output_filename()
{
this->placeholder_parser.update_timestamp();
try {
return this->placeholder_parser.process(this->config.output_filename_format.value, 0);
} catch (std::runtime_error &err) {
throw std::runtime_error(std::string("Failed processing of the output_filename_format template.\n") + err.what());
}
}
std::string Print::output_filepath(const std::string &path)
{
// if we were supplied no path, generate an automatic one based on our first object's input file
if (path.empty()) {
// get the first input file name
std::string input_file;
for (const PrintObject *object : this->objects) {
input_file = object->model_object()->input_file;
if (! input_file.empty())
break;
}
return (boost::filesystem::path(input_file).parent_path() / this->output_filename()).make_preferred().string();
}
// if we were supplied a directory, use it and append our automatically generated filename
boost::filesystem::path p(path);
if (boost::filesystem::is_directory(p))
return (p / this->output_filename()).make_preferred().string();
// if we were supplied a file which is not a directory, use it
return path;
}
}
|