/** @addtogroup spi_defines
*/
/*
* This file is part of the libopencm3 project.
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see .
*/
/* THIS FILE SHOULD NOT BE INCLUDED DIRECTLY, BUT ONLY VIA SPI.H
The order of header inclusion is important. spi.h includes the device
specific memorymap.h header before including this header file.*/
/** @cond */
#ifdef LIBOPENCM3_SPI_H
/** @endcond */
#pragma once
/**@{*/
#include
#define SPI_DR8(spi_base) MMIO8((spi_base) + 0x0c)
#define SPI1_DR8 SPI_DR8(SPI1_BASE)
#define SPI2_DR8 SPI_DR8(SPI2_BASE)
#define SPI3_DR8 SPI_DR8(SPI3_BASE)
/* CRCL: CRC Length */
/****************************************************************************/
/** @defgroup spi_crcl SPI crc length
* @ingroup spi_defines
*
* @{*/
#define SPI_CR1_CRCL_8BIT (0 << 11)
#define SPI_CR1_CRCL_16BIT (1 << 11)
/**@}*/
#define SPI_CR1_CRCL (1 << 11)
/* --- SPI_CR2 values ------------------------------------------------------ */
/* LDMA_TX: Last DMA transfer for transmission */
#define SPI_CR2_LDMA_TX (1 << 14)
/* LDMA_RX: Last DMA transfer for reception */
#define SPI_CR2_LDMA_RX (1 << 13)
/* FRXTH: FIFO reception threshold */
#define SPI_CR2_FRXTH (1 << 12)
/* FRF: Frame format */
/* Note: Not used in I2S mode. */
#define SPI_CR2_FRF (1 << 4)
#define SPI_CR2_FRF_MOTOROLA_MODE (0 << 4)
#define SPI_CR2_FRF_TI_MODE (1 << 4)
/* DS: Data size */
/****************************************************************************/
/** @defgroup spi_ds SPI data size
* @ingroup spi_defines
*
* @{*/
#define SPI_CR2_DS_4BIT (0x3 << 8)
#define SPI_CR2_DS_5BIT (0x4 << 8)
#define SPI_CR2_DS_6BIT (0x5 << 8)
#define SPI_CR2_DS_7BIT (0x6 << 8)
#define SPI_CR2_DS_8BIT (0x7 << 8)
#define SPI_CR2_DS_9BIT (0x8 << 8)
#define SPI_CR2_DS_10BIT (0x9 << 8)
#define SPI_CR2_DS_11BIT (0xA << 8)
#define SPI_CR2_DS_12BIT (0xB << 8)
#define SPI_CR2_DS_13BIT (0xC << 8)
#define SPI_CR2_DS_14BIT (0xD << 8)
#define SPI_CR2_DS_15BIT (0xE << 8)
#define SPI_CR2_DS_16BIT (0xF << 8)
/**@}*/
#define SPI_CR2_DS_MASK (0xF << 8)
/* NSSP: NSS pulse management */
#define SPI_CR2_NSSP (1 << 3)
/* --- SPI_SR values ------------------------------------------------------- */
/* FTLVL[1:0]: FIFO Transmission Level */
#define SPI_SR_FTLVL_FIFO_EMPTY (0x0 << 11)
#define SPI_SR_FTLVL_QUARTER_FIFO (0x1 << 11)
#define SPI_SR_FTLVL_HALF_FIFO (0x2 << 11)
#define SPI_SR_FTLVL_FIFO_FULL (0x3 << 11)
/* FRLVL[1:0]: FIFO Reception Level */
#define SPI_SR_FRLVL_FIFO_EMPTY (0x0 << 9)
#define SPI_SR_FRLVL_QUARTER_FIFO (0x1 << 9)
#define SPI_SR_FRLVL_HALF_FIFO (0x2 << 9)
#define SPI_SR_FRLVL_FIFO_FULL (0x3 << 9)
/* FRE : TI frame format error */
#define SPI_SR_FRE (1 << 8)
/* --- Function prototypes ------------------------------------------------- */
BEGIN_DECLS
int spi_init_master(uint32_t spi, uint32_t br, uint32_t cpol, uint32_t cpha,
uint32_t lsbfirst);
void spi_set_crcl_8bit(uint32_t spi);
void spi_set_crcl_16bit(uint32_t spi);
void spi_set_data_size(uint32_t spi, uint16_t data_s);
void spi_fifo_reception_threshold_8bit(uint32_t spi);
void spi_fifo_reception_threshold_16bit(uint32_t spi);
void spi_i2s_mode_spi_mode(uint32_t spi);
void spi_send8(uint32_t spi, uint8_t data);
uint8_t spi_read8(uint32_t spi);
END_DECLS
/** @cond */
#else
#warning "spi_common_v2.h should not be included explicitly, only via spi.h"
#endif
/** @endcond */
/**@}*/