diff options
Diffstat (limited to 'Documentation')
26 files changed, 1679 insertions, 614 deletions
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml new file mode 100644 index 000000000000..f9ffe3d6f957 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/port + description: + Any connector to the data bus of this controller should be modelled using + the OF graph bindings specified + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - connector + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml new file mode 100644 index 000000000000..86a0005cf156 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + There are two LED outputs available - FLED1 and FLED2. Each of them can + control a separate LED or they can be connected together to double the + maximum current for a single connected LED. One LED is represented by one + child node. + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-led + + maxim,boost-mode: + description: + In boost mode the device can produce up to 1.2A of total current on both + outputs. The maximum current on each output is reduced to 625mA then. If + not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in + case both current sources are used. + See LEDS_BOOST_* in include/dt-bindings/leds/common.h. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + maxim,boost-mvout: + description: | + Output voltage of the boost module in millivolts. + Valid values: 3300 - 5500, step by 25 (rounded down) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3300 + maximum: 5500 + default: 3300 + + maxim,mvsys-min: + description: | + Low input voltage level in millivolts. Flash is not fired if chip + estimates that system voltage could drop below this level due to flash + power consumption. + Valid values: 2400 - 3400, step by 33 (rounded down) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2400 + maximum: 3400 + default: 2400 + +patternProperties: + "^([a-z]+-)?led[01]?$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + led-sources: + allOf: + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + led-max-microamp: + description: | + Valid values for a LED connected to one FLED output: + 15625 - 250000, step by 15625 (rounded down) + Valid values for a LED connected to both FLED outputs: + 15625 - 500000, step by 15625 (rounded down) + + flash-max-microamp: + description: | + Valid values for a single LED connected to one FLED output + (boost mode must be turned off): + 15625 - 1000000, step by 15625 (rounded down) + Valid values for a single LED connected to both FLED outputs: + 15625 - 1250000, step by 15625 (rounded down) + Valid values for two LEDs case: + 15625 - 625000, step by 15625 (rounded down) + + flash-max-timeout-us: + description: | + Valid values: 62500 - 1000000, step by 62500 (rounded down) + minimum: 62500 + maximum: 1000000 + + required: + - flash-max-microamp + - flash-max-timeout-us + - led-max-microamp + - led-sources + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index d1f53bd449f7..4caadf73fc4a 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -31,7 +31,7 @@ properties: controller-data: description: - SPI controller data, see bindings/spi/spi-samsung.txt + SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml type: object google,cros-ec-spi-pre-delay: @@ -148,18 +148,21 @@ patternProperties: required: - compatible -if: - properties: - compatible: - contains: - enum: - - google,cros-ec-i2c - - google,cros-ec-rpmsg -then: - properties: - google,cros-ec-spi-pre-delay: false - google,cros-ec-spi-msg-delay: false - spi-max-frequency: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg + then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + else: + $ref: /schemas/spi/spi-peripheral-props.yaml additionalProperties: false @@ -200,7 +203,7 @@ examples: spi-max-frequency = <5000000>; proximity { - compatible = "google,cros-ec-mkbp-proximity"; + compatible = "google,cros-ec-mkbp-proximity"; }; cbas { diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt deleted file mode 100644 index be11943a0560..000000000000 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ /dev/null @@ -1,147 +0,0 @@ -Maxim MAX14577/77836 Multi-Function Device - -MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+ -Battery Charger and SFOUT LDO output for powering USB devices. It is -interfaced to host controller using I2C. - -MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. -For the description of Fuel Gauge low SOC alert interrupt see: -../power/supply/max17040_battery.txt - - -Required properties: -- compatible : Must be "maxim,max14577" or "maxim,max77836". -- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) -- interrupts : IRQ line for the chip. - - -Required nodes: - - charger : - Node for configuring the charger driver. - Required properties: - - compatible : "maxim,max14577-charger" - or "maxim,max77836-charger" - - maxim,fast-charge-uamp : Current in uA for Fast Charge; - Valid values: - - for max14577: 90000 - 950000; - - for max77836: 45000 - 475000; - - maxim,eoc-uamp : Current in uA for End-Of-Charge mode; - Valid values: - - for max14577: 50000 - 200000; - - for max77836: 5000 - 100000; - - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV; - In an overvoltage condition, INT asserts and charging - stops. Valid values: - - 6000000, 6500000, 7000000, 7500000; - - maxim,constant-uvolt : Battery Constant Voltage in uV; - Valid values: - - 4000000 - 4280000 (step by 20000); - - 4350000; - - -Optional nodes: -- max14577-muic/max77836-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max14577-muic" or "maxim,max77836-muic" - -- regulators : - Required properties: - - compatible : "maxim,max14577-regulator" - or "maxim,max77836-regulator" - - May contain a sub-node per regulator from the list below. Each - sub-node should contain the constraints and initialization information - for that regulator. See regulator.txt for a description of standard - properties for these sub-nodes. - - List of valid regulator names: - - for max14577: CHARGER, SAFEOUT. - - for max77836: CHARGER, SAFEOUT, LDO1, LDO2. - - The SAFEOUT is a fixed voltage regulator so there is no need to specify - voltages for it. - - -Example: - -#include <dt-bindings/interrupt-controller/irq.h> - -max14577@25 { - compatible = "maxim,max14577"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - muic: max14577-muic { - compatible = "maxim,max14577-muic"; - }; - - regulators { - compatible = "maxim,max14577-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - }; - - charger { - compatible = "maxim,max14577-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <450000>; - maxim,eoc-uamp = <50000>; - maxim,ovp-uvolt = <6500000>; - }; -}; - - -max77836@25 { - compatible = "maxim,max77836"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - muic: max77836-muic { - compatible = "maxim,max77836-muic"; - }; - - regulators { - compatible = "maxim,max77836-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - }; - - charger { - compatible = "maxim,max77836-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <225000>; - maxim,eoc-uamp = <7500>; - maxim,ovp-uvolt = <6500000>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 1032df14498b..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include <dt-bindings/leds/common.h> - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = <LEDS_BOOST_FIXED>; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt deleted file mode 100644 index 09decac20d91..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ /dev/null @@ -1,25 +0,0 @@ -Maxim MAX77802 multi-function device - -The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high -efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power -up application processors and peripherals, a 2-channel 32kHz clock outputs, -a Real-Time-Clock (RTC) and a I2C interface to program the individual -regulators, clocks outputs and the RTC. - -Bindings for the built-in 32k clock generator block and -regulators are defined in ../clk/maxim,max77802.txt and -../regulator/max77802.txt respectively. - -Required properties: -- compatible : Must be "maxim,max77802" -- reg : Specifies the I2C slave address of PMIC block. -- interrupts : I2C device IRQ line connected to the main SoC. - -Example: - - max77802: pmic@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&intc>; - interrupts = <26 IRQ_TYPE_NONE>; - reg = <0x09>; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml new file mode 100644 index 000000000000..27870b8760a6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which + includes voltage safeout regulators, charger and MicroUSB management IC. + + The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which + includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB + management IC. + +properties: + compatible: + enum: + - maxim,max14577 + - maxim,max77836 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + wakeup-source: true + + charger: + $ref: /schemas/power/supply/maxim,max14577.yaml + + extcon: + type: object + properties: + compatible: + enum: + - maxim,max14577-muic + - maxim,max77836-muic + + required: + - compatible + + regulators: + $ref: /schemas/regulator/maxim,max14577.yaml + +required: + - compatible + - interrupts + - reg + - charger + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577 + then: + properties: + charger: + properties: + compatible: + const: maxim,max14577-charger + extcon: + properties: + compatible: + const: maxim,max14577-muic + regulator: + properties: + compatible: + const: maxim,max14577-regulator + else: + properties: + charger: + properties: + compatible: + const: maxim,max77836-charger + extcon: + properties: + compatible: + const: maxim,max77836-muic + regulator: + properties: + compatible: + const: maxim,max77836-regulator + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + extcon { + compatible = "maxim,max14577-muic"; + }; + + regulators { + compatible = "maxim,max14577-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max14577-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <450000>; + maxim,eoc-uamp = <50000>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x25>; + wakeup-source; + + extcon { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..906101197e11 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = <LEDS_BOOST_FIXED>; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml new file mode 100644 index 000000000000..74a6867d3c82 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. + +maintainers: + - Luca Ceresoli <luca@lucaceresoli.net> + +description: | + MAX77714 is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC and watchdog. + +properties: + compatible: + const: maxim,max77714 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + regulators: + type: object + additionalProperties: false + + patternProperties: + '^(buck[0-3]|ldo[0-8])$': + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@1c { + compatible = "maxim,max77714"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml new file mode 100644 index 000000000000..baa1346ac5d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77802 is a Power Management IC which includes voltage and + current regulators (10 high efficiency Buck regulators and 32 Low-DropOut + (LDO)), RTC and clock outputs. + + The MAX77802 provides two 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77802.h. + +properties: + compatible: + const: maxim,max77802 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/maxim,max77802.yaml + description: + List of child nodes that specify the regulators. + + inb1-supply: + description: Power supply for buck1 + inb2-supply: + description: Power supply for buck2 + inb3-supply: + description: Power supply for buck3 + inb4-supply: + description: Power supply for buck4 + inb5-supply: + description: Power supply for buck5 + inb6-supply: + description: Power supply for buck6 + inb7-supply: + description: Power supply for buck7 + inb8-supply: + description: Power supply for buck8 + inb9-supply: + description: Power supply for buck9 + inb10-supply: + description: Power supply for buck10 + + inl1-supply: + description: Power supply for LDO8, LDO15 + inl2-supply: + description: Power supply for LDO17, LDO27, LDO30, LDO35 + inl3-supply: + description: Power supply for LDO3, LDO5, LDO7, LDO7 + inl4-supply: + description: Power supply for LDO10, LDO11, LDO13, LDO14 + inl5-supply: + description: Power supply for LDO9, LDO19 + inl6-supply: + description: Power supply for LDO4, LDO21, LDO24, LDO33 + inl7-supply: + description: Power supply for LDO18, LDO20, LDO28, LDO29 + inl9-supply: + description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34 + inl10-supply: + description: Power supply for LDO1, LDO2 + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/maxim,max77802.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + + BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = <MAX77802_OPMODE_NORMAL>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; + }; + + // ... + + LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml new file mode 100644 index 000000000000..61a0f9dcb983 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, fuel-gauge, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77843 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + extcon: + $ref: /schemas/extcon/maxim,max77843.yaml + + motor-driver: + type: object + properties: + compatible: + const: maxim,max77843-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: /schemas/regulator/maxim,max77843.yaml + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + extcon { + compatible = "maxim,max77843-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; + + ports { + port { + endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + + SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + motor-driver { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml new file mode 100644 index 000000000000..6de74c701635 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy7636a PMIC + +maintainers: + - Alistair Francis <alistair@alistair23.me> + +properties: + compatible: + const: silergy,sy7636a + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + '#thermal-sensor-cells': + const: 0 + + epd-pwr-good-gpios: + description: + Specifying the power good GPIOs. + maxItems: 1 + + regulators: + type: object + + properties: + compatible: + const: silergy,sy7636a-regulator + + vcom: + type: object + $ref: /schemas/regulator/regulator.yaml# + description: + The regulator for the compenstation voltage. Enabling/disabling this + enables/disables the entire device. + properties: + regulator-name: + const: vcom + + additionalProperties: false + +required: + - compatible + - reg + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml new file mode 100644 index 000000000000..3978b48299de --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for + additional information and example. + +properties: + compatible: + enum: + - maxim,max14577-charger + - maxim,max77836-charger + + maxim,constant-uvolt: + description: + Battery Constant Voltage in uV + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4000000 + maximum: 4350000 + + maxim,eoc-uamp: + description: | + Current in uA for End-Of-Charge mode. + MAX14577: 50000-20000 + MAX77836: 5000-100000 + $ref: /schemas/types.yaml#/definitions/uint32 + + maxim,fast-charge-uamp: + description: | + Current in uA for Fast Charge + MAX14577: 90000-950000 + MAX77836: 45000-475000 + $ref: /schemas/types.yaml#/definitions/uint32 + + maxim,ovp-uvolt: + description: + OverVoltage Protection Threshold in uV; In an overvoltage condition, INT + asserts and charging stops. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [6000000, 6500000, 7000000, 7500000] + +required: + - compatible + - maxim,constant-uvolt + - maxim,eoc-uamp + - maxim,fast-charge-uamp + - maxim,ovp-uvolt + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577-charger + then: + properties: + maxim,eoc-uamp: + minimum: 50000 + maximum: 200000 + maxim,fast-charge-uamp: + minimum: 90000 + maximum: 950000 + else: + # max77836 + properties: + maxim,eoc-uamp: + minimum: 5000 + maximum: 100000 + maxim,fast-charge-uamp: + minimum: 45000 + maximum: 475000 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml new file mode 100644 index 000000000000..a21dc1a8890f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-charger + + maxim,constant-microvolt: + description: | + Battery constant voltage in uV. The charger will operate in fast + charge constant current mode till battery voltage reaches this level. + Then the charger will switch to fast charge constant voltage mode. + Also vsys (system voltage) will be set to this value when DC power is + supplied but charger is not enabled. + Valid values: 3650000 - 4400000, step by 25000 (rounded down) + minimum: 3650000 + maximum: 4400000 + default: 4200000 + + maxim,min-system-microvolt: + description: | + Minimal system voltage in uV. + enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000, + 3600000, 3700000] + default: 3600000 + + maxim,thermal-regulation-celsius: + description: | + Temperature in Celsius for entering high temperature charging mode. + If die temperature exceeds this value the charging current will be + reduced by 105 mA/Celsius. + enum: [70, 85, 100, 115] + default: 100 + + maxim,battery-overcurrent-microamp: + description: | + Overcurrent protection threshold in uA (current from battery to + system). + Valid values: 2000000 - 3500000, step by 250000 (rounded down) + minimum: 2000000 + maximum: 3500000 + default: 3500000 + + maxim,charge-input-threshold-microvolt: + description: | + Threshold voltage in uV for triggering input voltage regulation loop. + If input voltage decreases below this value, the input current will + be reduced to reach the threshold voltage. + enum: [4300000, 4700000, 4800000, 4900000] + default: 4300000 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt deleted file mode 100644 index b82943d83677..000000000000 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ /dev/null @@ -1,111 +0,0 @@ -Binding for Maxim MAX77802 regulators - -This is a part of device tree bindings of MAX77802 multi-function device. -More information can be found in bindings/mfd/max77802.txt file. - -The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) -regulators that can be controlled over I2C. - -Following properties should be present in main device node of the MFD chip. - -Optional properties: -- inb1-supply: The input supply for BUCK1 -- inb2-supply: The input supply for BUCK2 -- inb3-supply: The input supply for BUCK3 -- inb4-supply: The input supply for BUCK4 -- inb5-supply: The input supply for BUCK5 -- inb6-supply: The input supply for BUCK6 -- inb7-supply: The input supply for BUCK7 -- inb8-supply: The input supply for BUCK8 -- inb9-supply: The input supply for BUCK9 -- inb10-supply: The input supply for BUCK10 -- inl1-supply: The input supply for LDO8 and LDO15 -- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35 -- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7 -- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14 -- inl5-supply: The input supply for LDO9 and LDO19 -- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33 -- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29 -- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34 -- inl10-supply: The input supply for LDO1 and LDO2 - -Optional nodes: -- regulators : The regulators of max77802 have to be instantiated - under subnode named "regulators" using the following format. - - regulator-name { - standard regulator constraints.... - }; - refer Documentation/devicetree/bindings/regulator/regulator.txt - -The regulator node name should be initialized with a string to get matched -with their hardware counterparts as follow. The valid names are: - - -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30 - and 32-35. - example: LDO1, LDO2, LDO35. - -BUCKn : for BUCKs, where n can lie in range 1 to 10. - example: BUCK1, BUCK5, BUCK10. - -The max77802 regulator supports two different operating modes: Normal and Low -Power Mode. Some regulators support the modes to be changed at startup or by -the consumers during normal operation while others only support to change the -mode during system suspend. The standard regulator suspend states binding can -be used to configure the regulator operating mode. - -The regulators that support the standard "regulator-initial-mode" property, -changing their mode during normal operation are: LDOs 1, 3, 20 and 21. - -The possible values for "regulator-initial-mode" and "regulator-mode" are: - 1: Normal regulator voltage output mode. - 3: Low Power which reduces the quiescent current down to only 1uA - -The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h -header and can be included by device tree source files. - -The standard "regulator-mode" property can only be used for regulators that -support changing their mode to Low Power Mode during suspend. These regulators -are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has -been enabled for the given suspend state using "regulator-on-in-suspend" and -has not been disabled for that state using "regulator-off-in-suspend". - -Example: - - max77802@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&wakeup_eint>; - interrupts = <26 0>; - reg = <0x09>; - #address-cells = <1>; - #size-cells = <0>; - - inb1-supply = <&parent_reg>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-initial-mode = <MAX77802_OPMODE_LP>; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-mode = <MAX77802_OPMODE_LP>; - }; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml new file mode 100644 index 000000000000..16f01886a601 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for + additional information and example. + +properties: + compatible: + enum: + - maxim,max14577-regulator + - maxim,max77836-regulator + + CHARGER: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Current regulator. + + properties: + regulator-min-microvolt: false + regulator-max-microvolt: false + + SAFEOUT: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Safeout LDO regulator (fixed voltage). + + properties: + regulator-min-microamp: false + regulator-max-microamp: false + regulator-min-microvolt: + const: 4900000 + regulator-max-microvolt: + const: 4900000 + +patternProperties: + "^LDO[12]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Current regulator. + + properties: + regulator-min-microamp: false + regulator-max-microamp: false + regulator-min-microvolt: + minimum: 800000 + regulator-max-microvolt: + maximum: 3950000 + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577-regulator + then: + properties: + LDO1: false + LDO2: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml new file mode 100644 index 000000000000..20d8559bdc2b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + CHARGER: + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Current regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microamp: + minimum: 60000 + regulator-max-microamp: + maximum: 2580000 + + required: + - regulator-name + +patternProperties: + "^ESAFEOUT[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Safeout LDO regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 3300000 + regulator-max-microvolt: + maximum: 4950000 + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml new file mode 100644 index 000000000000..f2b4dd15a0f3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC regulators + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO) + regulators. + + See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for + additional information and example. + + Certain regulators support "regulator-initial-mode" and "regulator-mode". + The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h + and their meaning is:: + 1 - Normal regulator voltage output mode. + 3 - Low Power which reduces the quiescent current down to only 1uA + + The standard "regulator-mode" property can only be used for regulators that + support changing their mode to Low Power Mode during suspend. These + regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the + regulator has been enabled for the given suspend state using + "regulator-on-in-suspend" and has not been disabled for that state using + "regulator-off-in-suspend". + +patternProperties: + # LDO1, LDO3, LDO20, LDO21 + "^LDO([13]|2[01])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + LDOs supporting the regulator-initial-mode property and changing their + mode during normal operation. + + # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35 + "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + LDOs supporting the regulator-mode property (changing mode to Low Power + Mode during suspend). + + properties: + regulator-initial-mode: false + + # buck2-4 + "^BUCK[2-4]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + bucks supporting the regulator-mode property (changing mode to Low Power + Mode during suspend). + + properties: + regulator-initial-mode: false + + # buck1, buck5-10 + "^BUCK([15-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-initial-mode: false + + patternProperties: + regulator-state-(standby|mem|disk): + type: object + properties: + regulator-mode: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml new file mode 100644 index 000000000000..a963025e96c1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-regulator + + CHARGER: + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Current regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microamp: + minimum: 100000 + regulator-max-microamp: + maximum: 3150000 + + required: + - regulator-name + +patternProperties: + "^SAFEOUT[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Safeout LDO regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 3300000 + regulator-max-microvolt: + maximum: 4950000 + + required: + - regulator-name + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index 273f2d95a043..e72b6a3fae99 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -22,7 +22,7 @@ description: | [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt - [3] Documentation/devicetree/bindings/spi/spi-samsung.txt + [3] Documentation/devicetree/bindings/spi/samsung,spi.yaml properties: $nodename: diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml new file mode 100644 index 000000000000..f0db3fb3d688 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: + See spi-peripheral-props.yaml for more info. + +properties: + controller-data: + type: object + additionalProperties: false + + properties: + samsung,spi-feedback-delay: + description: | + The sampling phase shift to be applied on the miso line (to account + for any lag in the miso line). Valid values: + - 0: No phase shift. + - 1: 90 degree phase shift sampling. + - 2: 180 degree phase shift sampling. + - 3: 270 degree phase shift sampling. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml new file mode 100644 index 000000000000..61c77088e8ee --- /dev/null +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/samsung,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC SPI controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: + All the SPI controller nodes should be represented in the aliases node using + the following format 'spi{n}' where n is a unique number for the alias. + +properties: + compatible: + oneOf: + - enum: + - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 + - samsung,s3c6410-spi + - samsung,s5pv210-spi # for S5PV210 and S5PC110 + - samsung,exynos5433-spi + - const: samsung,exynos7-spi + deprecated: true + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + cs-gpios: true + + dmas: + minItems: 2 + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + no-cs-readback: + description: + The CS line is disconnected, therefore the device should not operate + based on CS signalling. + type: boolean + + num-cs: + minimum: 1 + maximum: 4 + default: 1 + + samsung,spi-src-clk: + description: + If the spi controller includes a internal clock mux to select the clock + source for the spi bus clock, this property can be used to indicate the + clock to be used for driving the spi bus clock. If not specified, the + clock number 0 is used as default. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - dmas + - dma-names + - interrupts + - reg + +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-spi + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: spi + - enum: + - spi_busclk0 + - spi_busclk1 + - spi_busclk2 + - spi_busclk3 + - const: spi_ioclk + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: spi + - enum: + - spi_busclk0 + - spi_busclk1 + - spi_busclk2 + - spi_busclk3 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/clock/samsung,s2mps11.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + spi@14d30000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d30000 0x100>; + interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI1>, + <&cmu_peric CLK_SCLK_SPI1>, + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; + clock-names = "spi", + "spi_busclk0", + "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + + audio-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x2>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + SPKVDDL-supply = <&ldo18_reg>; + SPKVDDR-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5dd209206e88..df885eeb144f 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -85,5 +85,6 @@ properties: # The controller specific properties go here. allOf: - $ref: cdns,qspi-nor-peripheral-props.yaml# + - $ref: samsung,spi-peripheral-props.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt deleted file mode 100644 index 49028a4f5df1..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ /dev/null @@ -1,122 +0,0 @@ -* Samsung SPI Controller - -The Samsung SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required SoC Specific Properties: - -- compatible: should be one of the following. - - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms - - samsung,s3c6410-spi: for s3c6410 platforms - - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms - - samsung,exynos5433-spi: for exynos5433 compatible controllers - - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED> - -- reg: physical base address of the controller and length of memory mapped - region. - -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. - -- dmas : Two or more DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt - -- dma-names: Names for the dma channels. There must be at least one channel - named "tx" for transmit and named "rx" for receive. - -- clocks: specifies the clock IDs provided to the SPI controller; they are - required for interacting with the controller itself, for synchronizing the bus - and as I/O clock (the latter is required by exynos5433 and exynos7). - -- clock-names: string names of the clocks in the 'clocks' property; for all the - the devices the names must be "spi", "spi_busclkN" (where N is determined by - "samsung,spi-src-clk"), while Exynos5433 should specify a third clock - "spi_ioclk" for the I/O clock. - -Required Board Specific Properties: - -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Board Specific Properties: - -- samsung,spi-src-clk: If the spi controller includes a internal clock mux to - select the clock source for the spi bus clock, this property can be used to - indicate the clock to be used for driving the spi bus clock. If not specified, - the clock number 0 is used as default. - -- num-cs: Specifies the number of chip select lines supported. If - not specified, the default number of chip select lines is set to 1. - -- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt) - -- no-cs-readback: the CS line is disconnected, therefore the device should not - operate based on CS signalling. - -SPI Controller specific data in SPI slave nodes: - -- The spi slave nodes should provide the following information which is required - by the spi controller. - - - samsung,spi-feedback-delay: The sampling phase shift to be applied on the - miso line (to account for any lag in the miso line). The following are the - valid values. - - - 0: No phase shift. - - 1: 90 degree phase shift sampling. - - 2: 180 degree phase shift sampling. - - 3: 270 degree phase shift sampling. - -Aliases: - -- All the SPI controller nodes should be represented in the aliases node using - the following format 'spi{n}' where n is a unique number for the alias. - - -Example: - -- SoC Specific Portion: - - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - }; - -- Board Specific Portion: - - spi_0: spi@12d20000 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - cs-gpios = <&gpa2 5 0>; - - w25q80bw@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <10000>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; - }; - }; - }; diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index df20022c741f..6e0906ef5d25 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -185,6 +185,7 @@ Hardware Monitoring Kernel Drivers smsc47m1 sparx5-temp stpddc60 + sy7636a-hwmon tc654 tc74 thmc50 diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst new file mode 100644 index 000000000000..5612079397d5 --- /dev/null +++ b/Documentation/hwmon/sy7636a-hwmon.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver sy7636a-hwmon +========================= + +Supported chips: + + * Silergy SY7636A PMIC + + +Description +----------- + +This driver adds hardware temperature reading support for +the Silergy SY7636A PMIC. + +The following sensors are supported + + * Temperature + - SoC on-die temperature in milli-degree C + +sysfs-Interface +--------------- + +temp0_input + - SoC on-die temperature (milli-degree C) |